OWNER’S MANUAL
Network Blu-ray Disc™ /
DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
BD550
P/NO : MFL65225345
BD551-N.BPHLLLK-ENG.indd 1
10. 08. 27 �� 12:00
BD551-N.BPHLLLK-ENG.indd 2
10. 08. 27 �� 12:00
Safety Information
1
Safety Information
1
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
BD551-N.BPHLLLK-ENG.indd 3
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
10. 08. 27 �� 12:00
4
Safety Information
This device is equipped with a portable battery or
accumulator.
1
Safety Information
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc.,
of AACS protected contents. The operation of this
product and restrictions on this product may vary
depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
BD551-N.BPHLLLK-ENG.indd 4
10. 08. 27 �� 12:00
5
Contents
3
Installation
13
1
Connecting to Your TV
13
HDMI Connection
1
14
What is SIMPLINK?
15
Component Video
Connection
3
15
Video/Audio (Left/Right)
Connection
Safety Information
Cautions and Warnings
16
2
17
Resolution Setting
Connecting to an Amplifier
Preparation
17
Connecting to an Amplifier
via HDMI Output
7
Introduction
18
7
About the “ ” Symbol
Display
Connecting to an Amplifier
via Digital Audio Output
18
7
Symbols Used in this
Manual
Connecting to an Amplifier
via 2 Channel Audio Output
19
Connecting to your Home Network
7
Supplied Accesorries
19
Network connection
8
Playable Discs
20
9
File compatibility
22
10
Regional Code
22
10
AVCHD (Advanced Video
Codec High Definition)
23
10
Certain System
Requirements
23
Adjust the Setup Settings
Compatibility Notes
24
[DISPLAY] Menu
25
[LANGUAGE] Menu
26
[AUDIO] Menu
28
[LOCK] Menu
29
[NETWORK] Menu
29
[OTHERS] Menu
10
11
Remote control
12
Front panel
12
Rear panel
BD551-N.BPHLLLK-ENG.indd 5
2
Wired Network Setup
3
4
5
USB device connection
Playback content in the
USB device
Settings
6
7
10. 08. 27 �� 12:00
6
4
6
Operation
Troubleshooting
31
General Playback
46
General
33
Advanced Playback
47
Picture
36
On-Screen display
47
Sound
38
Enjoying BD-Live™
48
Network
39
Playing a movie file and VR disc
41
Viewing a photo
41
Options while viewing a
photo
42
Listening to music while
slide show
43
43
43
Listening to music
Displaying MP3 music
information (ID3 Tag)
Audio CD Recording
5
Maintenance
45
Notes on Discs
45
Handling the Unit
BD551-N.BPHLLLK-ENG.indd 6
7
Appendix
49
Controlling a TV with the Supplied
Remote Control
50
Network Software Update
52
Area Code List
53
Language code List
54
Trademarks and Licenses
55
Audio Output Specifications
57
Video Output Resolution
58
Specifications
59
Important Information Relating to
Network Services
60
Open source software notice
10. 08. 27 �� 12:00
Preparation
7
2
Preparation
Introduction
Music files contained in
the USB/Disc
PHOTO
Photo files
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
Symbols Used in this Manual
Supplied Accesorries
Video cable (1)
Audio cable (1)
Remote control (1)
Battery (1)
2
Preparation
MUSIC
NOTE
Indicates special notes and operating features.
CAUTION
Indicates cautions for preventing possible
damages from abuse.
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
BD
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode
and finalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
Movie files contained in
the USB/Disc
BD551-N.BPHLLLK-ENG.indd 7
10. 08. 27 �� 12:00
8
Preparation
Playable Discs
Blu-ray Disc
-- Discs such as movies that can
be purchased or rented.
-- BD-R/RE discs that contain
Movie, Music or Photo files.
2
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
Preparation
DVD±R (8 cm / 12 cm disc)
-- Video mode and finalized only
-- Supports the dual layer disc
also
-- Finalized AVCHD format
-- DVD±R discs that contain
Movie, Music or Photo files.
DVD-RW (8 cm / 12 cm disc)
-- VR mode, Video mode and
finalized only
-- Finalized AVCHD format
-- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
-- Video mode and finalized only
-- Finalized AVCHD format
-- DVD+RW discs that contain
Movie, Music or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
-- CD-R/RW discs that contain
audio titles, Movie, Music or
Photo files.
BD551-N.BPHLLLK-ENG.indd 8
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW, DVD
±R/RW, BD-R/RE) may not be playable.
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
• This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)
10. 08. 27 �� 12:00
Preparation
File compatibility
Overall
Available File extensions: “.jpg”, “.jpeg”, “.png”,
“.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”,
“.wma”, “.gif”
• The file name is limited to 180 characters.
MOVIE
Available resolution size: 1920 x 1080 (W x
H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Playable Codec format: “DIVX3.xx”, “DIVX4.xx”,
“DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback
only), H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
• Not all the WMA and AAC Audio format are
compatible with this unit.
Sampling frequency: within 32-48 kHz
(WMA), within 16-48 kHz (MP3)
Bit rate: within 32-192Kbps (WMA),
within 32-320Kbps (MP3)
NOTE
• HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
files.
• This player support H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
• This player does not support the file that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
*1GMC – Global Motion Compensation
*2Qpel ­– Quarter pixel
• This player supports UTF-8 files even it contains
Unicode subtitle contents. This player can not
support the pure Unicode subtitle files.
• Depending on the types of file or ways of
recording, it may not play back.
• A disc which was recorded by multi-session on
normal PC is not supported on this player.
• To be playback a movie file, movie file name and
Subtitle file name must be the same.
• If video codec is MPEG2 TS or MPEG2 PS, subtitle
does not play back.
2
Preparation
• Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
9
Audio Files
Sampling frequency: within 32 - 48KHz
(WMA), within 11 - 48KHz (MP3)
Bit rate: within 8 - 320 kbps (WMA, MP3),
NOTE
The total playback time indicated on the screen
may not correct for VBR files.
Photo Files
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
• Progressive and lossless compression photo
image files are not supported.
BD551-N.BPHLLLK-ENG.indd 9
10. 08. 27 �� 12:00
10
Preparation
Regional Code
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or “ALL”.
2
AVCHD (Advanced Video Codec
High Definition)
Preparation
• This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
• The AVCHD format is a high definition
digital video camera format.
• The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
• Some AVCHD discs use the “x.v.Color”
format.
• This player can playback AVCHD discs using
“x.v.Color” format.
• Some AVCHD format discs may not play
depending on the recording condition.
• AVCHD format discs need to be finalized.
• “x.v.Color” offers a wider color range than
normal DVD camcorder discs.
Certain System Requirements
For Dolby® Digital Plus, Dolby TrueHD and DTSHD multi-channel audio playback:
• An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD) decoder.
• Main, center, surround speakers and
subwoofer as necessary for chosen format.
Compatibility Notes
• Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Center.
• Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
• Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
• Dolby TrueHD, Dolby Digital Plus and DTSHD are supported with maximum 7.1
channels if you use HDMI connection for
the audio output of the unit.
• You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
For high definition video playback:
• High definition display that has
COMPONENT or HDMI input jacks.
• BD-ROM disc with high definition content.
• HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
• For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
BD551-N.BPHLLLK-ENG.indd 10
10. 08. 27 �� 12:00
Preparation
11
Remote control
• • • • • • c• • • • • • 1 (POWER): Switches the
player ON or OFF.
HOME ( ): Displays or exits
the [Home Menu].
REPEAT: Repeats a desired
section or sequence.
DISC MENU: Accesses menu on
a disc.
* : The button is not available for
any function.
Direction buttons: Selects an
option in the menu.
Z (OPEN/CLOSE): Opens and
ENTER ( ): Acknowledges
menu selection.
closes the disc tray.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
TV Control Buttons: See page
49.
• • • • • • b• • • • • • m/M (SCAN): Searches
backward or forward.
./> (SKIP): Goes to the
next or previous chapter / track
/ file.
X (PAUSE): Pauses playback.
Battery Installation
N (PLAY): Starts playback.
x (STOP): Stops playback.
2
Preparation
• • • • • • a• • • • • • RETURN (O): Exits the menu
or resumes playback. The
resume play function may not
work depending on the BDROM disc.
INFO/DISPLAY ( ): Displays or
exits On-Screen Display.
• • • • • • d• • • • • • ZOOM: Displays or exits the
[Zoom] menu.
MARKER: Marks any point
during playback.
SEARCH: Displays or exits the
search menu.
TITLE/POP-UP: Displays the
DVD title menu or BD-ROM’s
pop-up menu, if available.
Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO] and [MUSIC] menu.
Remove the battery cover
on the rear of the Remote
Control, and insert one R03
(size AAA) battery with
and matched correctly.
BD551-N.BPHLLLK-ENG.indd 11
10. 08. 27 �� 12:00
12
Preparation
Front panel
2
Preparation
a Disc Tray
e N/X (PLAY / PAUSE)
b Display Window
f x (STOP)
c Remote Sensor
g 1 (POWER) Button
d Z (OPEN/CLOSE)
h USB Port
Rear panel
a AC power cord
e HDMI OUT (Type A, Version 1.3)
b VIDEO OUT
f DIGITAL AUDIO OUT (COAXIAL)
c 2CH AUDIO OUT (Left/Right)
g LAN port
d COMPONENT VIDEO OUT (Y PB PR)
BD551-N.BPHLLLK-ENG.indd 12
10. 08. 27 �� 12:01
Installation
13
3
Installation
Connecting to Your TV
• HDMI connection (page 13-14)
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable
(Type A, Version 1.3). Connect the HDMI jack
on the player to the HDMI jack on a HDMI
compatible TV or monitor.
3
Installation
Make one of the following connections,
depending on the capabilities of your existing
equipment.
HDMI Connection
HDMI Connection
• Component Video connection (page 15)
• Video connection (page 15)
BD Player
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
• Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
HDMI
Cable
TV
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
BD551-N.BPHLLLK-ENG.indd 13
10. 08. 27 �� 12:01
14
Installation
NOTE
• If a connected HDMI device does not accept
the audio output of the player, the HDMI device
’s audio sound may be distorted or may not
output.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 16.)
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 25).
3
Installation
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
• If there are noises or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m (15 ft.)).
What is SIMPLINK?
Some functions of this unit are controlled by
the TV’s remote control when this unit and LG
TV’s with SIMPLINK are connected through
HDMI connection.
Controllable functions by LG TV’s remote
control; Play, Pause, Scan, Skip, Stop, Power Off,
etc.
Refer to the TV owner’s manual for the details
of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
NOTE
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Additional Information for HDMI
• When you connect a HDMI or DVI
compatible device make sure of the
following:
-- Try switching off the HDMI/DVI device
and this player. Next, switch on the
HDMI/DVI device and leave it for around
30 seconds, then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
• Not all HDCP-compatible HDMI or DVI
devices will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
-- This player does not playback and TV
screen is changed to black screen.
BD551-N.BPHLLLK-ENG.indd 14
10. 08. 27 �� 12:01
Installation
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on
the TV using component video cable. Connect
the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on
the TV using the audio cables.
Component Connection
NOTE
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 16.)
Video/Audio (Left/Right)
Connection
Video/Audio Connection
3
Installation
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
Connect the left and right AUDIO OUT jacks of
the player to the audio left and right IN jacks
on the TV using the audio cables.
BD Player
15
BD Player
Component
video cable
Audio
cable
Audio cable
Video cable
TV
TV
BD551-N.BPHLLLK-ENG.indd 15
10. 08. 27 �� 12:01
16
Installation
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME (
).
2. Use Y to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p as follows:
1. Press Z to open the disc tray.
2 Press x (STOP) for more than 5 seconds.
• Since several factors affect the resolution of
video output, see “Video Output Resolution” on
page 57.
• When you set the HDMI Resolution, over 720p is
not outputted to Composite Video.
3
Installation
3. Use vV to select [DISPLAY] option then
press B to move to the second level.
4. Use vV to select the [Resolution] option
then press ENTER ( ) to move to the third
level.
5. Use vV to select the desired resolution
then press ENTER ( ) to confirm your
selection.
BD551-N.BPHLLLK-ENG.indd 16
10. 08. 27 �� 12:01
Installation
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
• HDMI Audio connection (page 17)
17
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 26-27.)
HDMI Connection
• Digital Audio connection (page 18)
• 2CH Analog Audio connection (page 18)
BD Player
Since many factors affect the type of audio
output, see “Audio Output Specifications” for
details (pages 55-56).
3
Installation
About Digital Multi-channel sound
A digital multichannel connection provides the
best sound quality. For this, you need a multichannel Audio/Video Receiver that supports
one or more of the audio formats supported by
your player. Check the receiver manual and the
logos on the front of the receiver. (PCM Stereo,
PCM Multi-Ch, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and/or DTS-HD)
HDMI cable
Receiver/Amplifier
HDMI cable
TV
Connect the amplifier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplifier has HDMI output jack.
BD551-N.BPHLLLK-ENG.indd 17
10. 08. 27 �� 12:02
18
Installation
Connecting to an Amplifier via
Digital Audio Output
Connecting to an Amplifier via
2 Channel Audio Output
Connect the player’s DIGITAL AUDIO OUT jack
to the corresponding in jack (COAXIAL) on your
amplifier. Use an optional digital audio cable.
You will need to activate the player’s digital
output. (See “[AUDIO] Menu” on pages 26-27.)
Connect the Left and Right 2CH AUDIO OUT
jacks on the player to the audio left and right
in jacks on your amplifier, receiver, or stereo
system using audio cables.
2CH Analog Audio Connection
Digital Audio Connection
BD Player
BD Player
3
Installation
Coaxial
cable
Receiver/Amplifier
BD551-N.BPHLLLK-ENG.indd 18
Audio cable
Receiver/Amplifier
10. 08. 27 �� 12:02
Installation
Connecting to your
Home Network
19
Wired Network Connection
Router/Modem
Broadband
service
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity.
PC
PC
Network connection
3
Installation
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
NOTE
LAN cable
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
BD Player
BD551-N.BPHLLLK-ENG.indd 19
10. 08. 27 �� 12:03
20
Installation
Wired Network Setup
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
Preparation
3
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Installation
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using vVY and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
3. Select [OK] and press ENTER ( ) to apply
network settings.
4. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
5. If you select [Test] and press ENTER
( ) at step 4 above, the network
connection status is displayed on the
screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
2. Use vVY to select the IP mode between
[Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
BD551-N.BPHLLLK-ENG.indd 20
10. 08. 27 �� 12:03
Installation
Notes on Network Connection:
• Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
• Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
• The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
• Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
• A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
• You must use a Router to use xDSL service.
• A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
3
Installation
• Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
21
• The of a “Router” may not be allowed or
its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
• Some internet contents may require a
higher bandwidth connection.
• Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
• Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
BD551-N.BPHLLLK-ENG.indd 21
10. 08. 27 �� 12:03
22
Installation
USB device
connection
3. Select [Movie],[Photo] or [Music] using
Y, and press ENTER ( ).
This player can play movie, music and photo
files contained in the USB device.
Playback content in the USB
device
3
4. Select the [USB] option using Y, and
press ENTER ( ).
1. Insert a USB device to the USB port until it
fits into place.
Installation
USB device connection
5. Select a file using vVY, and press PLAY
or ENTER ( ) to play the file.
When you connect the USB device on the
HOME menu, the player plays a music fi
le contained in the USB storage device
automatically. If the USB storage device is
containing various types of files, a menu for
the file type selection will appear.
6. Withdraw the USB device carefully.
File loading may takes few minutes depending
on the number of content stored in the USB
storage device. Press ENTER ( ) while [Cancel]
is selected to stop loading.
2. Press HOME (
BD551-N.BPHLLLK-ENG.indd 22
).
10. 08. 27 �� 12:03
Installation
NOTE
• This player supports USB flash drive/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing files (movie,music, photo). However,
for BD-Live and Audio CD recording, only FAT16
and FAT32 formats are supported. Use the USB
flash drive/external HDD formatted in either
FAT16 or FAT32 when using BD-Live and Audio
CD recording.
23
Settings
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME (
).
• The USB device can be used for the local storage
for enjoying BD-Live discs with Internet.
• This unit can support up to 6 partitions of the
USB device.
3
• A USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
2. Use Y to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
• USB device: USB device that supports USB1.1
and USB2.0.
Installation
• Do not extract the USB device during operation
(play, etc.).
• Movie,Music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
• Some USB device may not work with this unit.
3. Use vV to select the first setup option, and
press B to move to the second level.
• Digital camera and mobile phone are not
supported.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
BD551-N.BPHLLLK-ENG.indd 23
10. 08. 27 �� 12:03
24
Installation
4. Use vV to select a second setup option,
and press ENTER ( ) to move to the third
level.
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Resolution
5. Use vV to select a desired setting, and
press ENTER ( ) to confirm your selection.
3
Installation
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
Sets the output resolution of the Component
and HDMI video signal. Refer to page 16 and
57 for details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT is only connected,
this changes the resolution to 1080i as
default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p]
Outputs 480 lines of progressive video.
[480i]
Outputs 480 lines of interlaced video.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
BD551-N.BPHLLLK-ENG.indd 24
10. 08. 27 �� 12:03
Installation
1080p Display Mode
When the resolution is set to 1080p, select
[24Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
NOTE
• When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [60 Hz].
HDMI Color Setting
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
BD551-N.BPHLLLK-ENG.indd 25
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and
on-screen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then press ENTER ( )
to enter the corresponding 4-digit number
according to the language code list on
page 53.
3
Installation
• Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of the
video output will be 60 Hz to match the video
source format.
25
[Off] (Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
10. 08. 27 �� 12:03
26
Installation
[AUDIO] Menu
Each disc has a variety of audio output options.
Set the player’s Audio options according to the
type of audio system you use.
NOTE
Since many factors affect the type of audio output,
see “Audio Output Specifications” on page 55-56 for
details.
3
HDMI / Digital Output (SPDIF)
Installation
Select the output sound format when a device
equipped with a HDMI or Digital Audio input
jack is connected to the HDMI OUT or DIGITAL
AUDIO OUT jack on this player.
[PCM Stereo]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT
jack to a device with multi-channel digital
decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
DTS decoder.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device
with LPCM, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and DTS-HD decoder.
BD551-N.BPHLLLK-ENG.indd 26
NOTE
• When [HDMI] option is set to [PCM Multi-Ch],
the audio may output as PCM Stereo if the PCM
Multi-Ch information is not detected from HDMI
device with EDID.
• If the [HDMI] or [Digital Output (SPDIF)] option
is set to [DTS Re-Encode], the DTS Re-Encode
audio is outputted for BD-ROM discs with
secondary audio and the original audio is
outputted for the other discs (like [Primary PassThru]).
Sampling Freq.
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier
is capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz signals.
When this choice is made, this unit
automatically converts any 192 kHz signals
to 96 kHz so your system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz and 96
kHz signal. When this choice is made, this
unit automatically converts any 192 kHz
and 96 kHz signals to 48 kHz so your system
can decode them.
Check the documentation for your A/V
Receiver or Amplifier to verify its capabilities.
10. 08. 27 �� 12:03
Installation
DRC (Dynamic Range Control)
DTS Neo:6
This function allows you to listen to a movie at
a lower volume without losing clarity of sound.
If the player is connected to the multi-channel
Audio Receiver by HDMI connection, set this
option to enjoy the multi-channel surround
sound with the 2-channel audio source.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
3
Installation
[Auto]
The dynamic range of the Dolby TrueHD
audio output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same
as the [On] mode.
27
NOTE
• This function is not available on an on-line
service.
• Only the audio source with less than 48 kHz
sampling frequency is available for this function.
• This function is availabe only when [HDMI]
option is set to [PCM Multi-Ch].
BD551-N.BPHLLLK-ENG.indd 27
10. 08. 27 �� 12:03
28
Installation
[LOCK] Menu
The [LOCK] settings affect only BD and DVD
playback.
To access the any features in [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
3
Password
Installation
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
If you forget your password
If you forget your password, you can clear it
using the following steps:
1. Remove any disc that might be in the
player.
2. Select [Password] option in the [Setup]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
BD Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM
viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
NOTE
The [BD Rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 52.
NOTE
If you make a mistake before pressing ENTER ( ),
press CLEAR. Then input the correct password.
BD551-N.BPHLLLK-ENG.indd 28
10. 08. 27 �� 12:03
Installation
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD Live.
Connection Setting
If your home network environment is ready
to connect the player, the player needs to be
set the wired network connection for network
communication. (See “Connecting to your
Home Network” on pages 19-21.)
Connection Status
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
contents.
[Partially permitted]
Internet access is permitted only for BDLive contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLive contents without a certificate.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
3
Installation
If you want to check the network status on
this player, select the [Connection Status]
options and press ENTER ( ) to check whether
a connection to the network and the internet
have been established.
29
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
[Prohibited]
Internet access is prohibited for all BD-Live
contents.
BD551-N.BPHLLLK-ENG.indd 29
10. 08. 27 �� 12:03
30
Operation
Auto Power Off
The screen saver appears when you leave
the player in Stop mode for about five
minutes. If you set this option to [On], the unit
automatically turns itself off after the Screen
Saver is displayed for 20 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
Initialize
Factory Set
You can reset the player to its original
factory settings.
BD Storage Clear
Initializes the BD contents from the
connected USB storage.
4
Operation
NOTE
If you reset the player to its original factory settings
using [Factory Set] option, you have to set the
network settings again.
Software
Information
Displays the current software version.
Update
You can update the software by connecting
the unit directly to the software update
server (see page 50-51).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 59.
BD551-N.BPHLLLK-ENG.indd 30
10. 08. 27 �� 12:03
Operation
31
4
Operation
General Playback
5. Select the [Data] option using Y, and
press ENTER ( ).
Playing Discs
1. Press Z (OPEN/CLOSE), and place a disc on
the disc tray.
Insert a disc
6. Select a file using vVY, and press
N(PLAY) or ENTER ( ) to play the file.
4
Operation
This step is needed only when a disc and a
USB device is connected simultaneously in
this unit.
NOTE
2. Press Z (OPEN/CLOSE) to close the disc
tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
3. Press HOME (
• Playback functions described in this manual are
not always available in every files and media.
Some functions can be restricted depending on
many factors.
• Depending on the BD-ROM titles, a USB device
connection may be needed for the proper
playback.
).
4. Select [Movie], [Photo] or [Music] using
Y, and press ENTER ( ).
BD551-N.BPHLLLK-ENG.indd 31
10. 08. 27 �� 12:03
32
Operation
To stop playback
Press x (STOP) while playback.
DVD
AVCHD
To display the disc menu
Press X (PAUSE) while playback.
Press N (PLAY) to resume playback.
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu while playback,
press DISC MENU.
Press X (PAUSE) while movie playback.
Press X (PAUSE) repeatedly to play Frame-byFrame playback.
To scan forward or backward
4
BD
To pause playback
To play frame-by-frame
Using the disc menu
Press m or M (SCAN) to play fast forward
or fast reverse during playback.
You can change the various playback speeds
by pressing m or M (SCAN) repeatedly.
Operation
To slow down the playing speed
While the playback is paused, press M
(SCAN) repeatedly to play various speeds of
slow motion.
To skip to the next/previous
chapter/track/file
During playback, press . or > (SKIP) to
go to the next chapter/track/file or to return to
the beginning of the current chapter/track/file.
Press . (SKIP) twice briefly to step back to
the previous chapter/track/file.
Use vVY buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu
that appears while playback.
Press TITLE/POPUP while playback, and use
vVY buttons to navigate through menu
items.
Resume playback
BD
MOVIE
DVD
AVCHD
ACD
MUSIC
The unit records the point where you pressed
the x (STOP) depending on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press N (PLAY) to resume playback
(from the scene point).
If you press x (STOP) twice or unload the disc,
“x(Complete Stop)” appears on the screen. The
unit will clear the stopped point.
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
Z (OPEN/CLOSE), etc).
• On BD-Video discs with BD-J, the resume
playback function does not work.
• If you press x (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
BD551-N.BPHLLLK-ENG.indd 32
10. 08. 27 �� 12:03
Operation
Advanced Playback
DVD
AVCHD
Repeating a specific portion
BD
DVD
AVCHD
ACD
MOVIE
This player can repeat a portion you have
selected.
Repeat Playback
BD
MOVIE
33
ACD
MUSIC
During playback, press REPEAT repeatedly to
select a desired repeat mode.
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
repeatedly to select [Off ].
NOTE
• You cannot select a portion less than 3 seconds.
• This function may not work on some disc or title.
To return to normal playback, press REPEAT
repeatedly to select [Off ].
Enlarge the playback image
Audio CDs/Audio files
Track – The current track or file will be
played back repeatedly.
All – All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
All – All the tracks or files will be
played back repeatedly in random order.
A-B– Selected portion will be repeated
continually. (Audio CD only)
1. During playback or pause mode, press
ZOOM to display the [Zoom] menu.
BD
DVD
AVCHD PHOTO MOVIE
4
Operation
BDs/DVDs/Movie
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title – The current title will be played
back repeatedly.
Track – The current track or file will be
played back repeatedly.
All – All the tracks or files will be played
back repeatedly.
1. While playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat.
2. Use red (R) or green (G) colored button to
zoom out or in the picture. You can move
through the zoomed picture using vVY
buttons.
3. To return to the normal picture size, press
yellow (Y) colored button.
4. Press RETURN (O) to exit the [Zoom]
menu.
To return to normal playback, press CLEAR.
NOTE
• If you press > (SKIP) once during Repeat
Chapter/Track playback, the repeat playback
cancels.
• This function may not work on some disc or title.
BD551-N.BPHLLLK-ENG.indd 33
10. 08. 27 �� 12:03
34
Operation
Marker Search
BD
DVD
AVCHD MOVIE
Using the search menu
BD
DVD
AVCHD MOVIE
You can start playback from up to nine
memorized points.
Using search menu, you can easily to find the
point where you want to start playback.
To enter a marker
To search a point
1. While playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
1. During playback, press SEARCH to display
the search menu.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
4
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
2. Press V to highlight a marker number. Use
Y to select a marked scene that you want
to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
2. Press Y to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding Y button.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press V to highlight a marker number. Use
Y to select a marked scene that you want
to start playback.
3. Press ENTER ( ) to start playback from the
marked scene.
NOTE
This function may not work on some disc or title.
NOTE
• This function may not work on some disc or title.
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
• If the total length of the title is less than 10
seconds, this function is not available.
BD551-N.BPHLLLK-ENG.indd 34
10. 08. 27 �� 12:03
Operation
Changing content list view
Viewing content information
MUSIC PHOTO MOVIE
MOVIE
On the [Movie] [Music] or [Photo] menu, you
can change the content list view.
The player can display the content information.
Method 1
2. Press INFO/DISPLAY ( ) to display the
option menu.
Press red (R) colored button repeatedly.
35
1. Select a file using vVY.
3. Select the [Information] option using vV,
and press ENTER ( ).
The file information appears on the screen.
During movie playback, you can display the file
information by pressing TITLE/POPUP.
NOTE
The information displayed on the screen may
not be correct compared to the actual content
information.
Operation
Last Scene Memory
BD
4
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
Method 2
1. On the content list, press INFO/DISPLAY ( )
to display the option menu.
2. Use vV to select the [View Change] option.
3. Press ENTER ( ) to change the content list
view.
BD551-N.BPHLLLK-ENG.indd 35
• This function may not work depending on the
disc.
• On BD-Video discs with BD-J, the last scene
memory function does not work.
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
10. 08. 27 �� 12:03
36
Operation
On-Screen display
2. Select an option using vV.
You can display and adjust various information
and settings about the content.
4. Press RETURN(O) to exit the On-Screen
display.
Displaying content information
on-screen
BD
DVD
AVCHD MOVIE
1. While playback, press INFO/DISPLAY ( ) to
show various playback information.
a
b
c
4
Operation
d
e
f
g
h
a Title – current title number/total number
of titles
b Chapter – current chapter number/total
number of chapters
c Time – elapsed playing time/total
playback time
d Audio – selected audio language or
channel
e Subtitle – selected subtitle
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect
Ratio
3. Use Y to adjust the selected option
value.
NOTE
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some
discs.
• Available items may differ depending on discs
or titles.
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
Playing from selected time
BD
DVD
AVCHD MOVIE
1. Press INFO/DISPLAY ( ) during playback.
The time search box shows the elapsed
playing time.
2. Select the [Time] option and then input
the required start time in hours, minutes,
and seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press Y to skip the playback 60 seconds
forward or backward.
3. Press ENTER ( ) to start playback from
selected time.
NOTE
This function may not work on some disc or titles.
h Picture Mode – selected picture mode
BD551-N.BPHLLLK-ENG.indd 36
10. 08. 27 �� 12:03
Operation
Hearing a different audio
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use vV to select the [Audio] option.
3. Use Y to select desired audio language,
audio track or audio channel.
Watching from a different
angle
BD
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use vV to select the [Angle] option.
NOTE
• Some discs allow you to change audio selections
only via the disc menu. In this case, press TITLE/
POP-UP or DISC MENU button and choose the
appropriate audio from the selections on the
disc menu.
3. Use Y to select desired angle.
4. Press RETURN (O) to exit the On-Screen
display.
Changing the TV Aspect Ratio
• On BD-ROM disc, the multi audio format (5.1CH
or 7.1CH) is displayed with [MultiCH] in the onscreen display.
You can change the TV aspect ratio setting
while playback.
Selecting a subtitle language
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use vV to select the [Subtitle] option.
3. Use Y to select desired subtitle language.
4. Press RETURN (O) to exit the On-Screen
display.
BD
DVD
AVCHD MOVIE
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
4
Operation
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
BD
37
2. Use vV to select the [TV Aspect Ratio]
option.
3. Use Y to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV Aspect
Ratio] option in the [Setup] menu is not changed.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
TITLE/POP-UP or DISC MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
BD551-N.BPHLLLK-ENG.indd 37
10. 08. 27 �� 12:03
38
Operation
Changing the Picture Mode
BD
DVD
AVCHD MOVIE
You can change the [Picture mode] option
while playback.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use vV to select the [Picture Mode] option.
3. Use Y to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
Setting the [User] option
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
4
2. Use vV to select the [Picture Mode] option.
Operation
3. Use Y to select the [User setting] option,
and press ENTER ( ).
Enjoying BD-Live™
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW™ (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile). Secondary
video and audio can be played from a disc
compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
In addition to the BONUSVIEW™ function,
BD-Video supporting BD-Live (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
1. Check the network connection and settings
(pages 19-21).
2. Insert a USB storage device to the USB port
on the front panel.
A USB storage device is needed to
download bonus content.
4. Use vVY to adjust the [Picture Mode]
options.
USB device connection
Select [Default] option then press ENTER
( ) to reset the all video adjustments.
5. UsevVY to select the [Close] option,
and press ENTER ( ) to finish setting.
BD551-N.BPHLLLK-ENG.indd 38
10. 08. 27 �� 12:04
Operation
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Setup] menu
(page 29).
Depending on a disc, the BD-Live
function may not be operated if [BDLIVE connection] option is set to [Partially
Permitted].
4. Insert a BD-ROM with BD-Live.
The operations are differ depending on the
disc. Refer to the manual supplied with the
disc.
39
Playing a movie file
and VR disc
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie files
contained in a disc/USB device.
1. Press HOME (
).
CAUTION
2. Select [Movie] using Y, and press ENTER
( ).
3. Select [Disc] or [USB] option using Y,
and press ENTER ( ).
4
Operation
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-Live features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC and
reuse it with this player.
NOTE
• Some BD-Live contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-Live contents.
This step is needed only when a disc and a
USB device is connected simultaneously to
this unit.
4. Select a file using vVY, and press N
(PLAY) or ENTER ( ) to play the file.
BD551-N.BPHLLLK-ENG.indd 39
10. 08. 27 �� 12:04
40
Operation
NOTE
• The file requirements are described on page 9
• You can use various playback functions. Refer to
pages 31-35.
• Unfinalized DVD VR format discs may not be
played in this player.
• Some DVD-VR discs are made with CPRM data
by DVD RECORDER. This unit cannot support
these kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programs. CPRM stands
for Content Protection for Recordable Media.
NOTE
If you press x (STOP) during playback, the subtitle
selection is cancelled.
Changing subtitle code page
MOVIE
If the subtitle is not displayed properly, you
can change the subtitle code page to view the
subtitle file properly.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use vV to select the [Code Page] option.
4
Selecting a subtitle file
3. Use Y to select desired code option.
MOVIE
Operation
If a movie file name and the subtitle file
name are the same, subtitle file is played
automatically when playing the movie file.
If the subtitle file name is different with the
movie file name, you need to select the subtitle
file on the [Movie] menu before playing the
movie.
1. Use vVY to select the subtitle file you
wish to play in the [Movie] menu.
4. Press RETURN (O) to exit the On-Screen
display.
2. Press ENTER ( ).
Press ENTER ( ) again to deselect the
subtitle file. Selected subtitle file will be
displayed when you play the movie file.
BD551-N.BPHLLLK-ENG.indd 40
10. 08. 27 �� 12:04
Operation
Viewing a photo
You can view photo files using this player.
1. Press HOME (
41
To play a slide show
Press N (PLAY) to start slide show.
To stop a slide show
Press x (STOP) while slide show.
).
To pause a slide show
Press X (PAUSE) while slide show.
Press N (PLAY) to re-start the slide show.
To skip to the next/previous photo
2. Select [Photo] using Y, and press ENTER
( ).
3. Select [Data] or [USB] option using Y,
and press ENTER ( ).
While viewing a photo in full screen, pressb or
B to go to the previous or next photo.
NOTE
• The file requirements are described on page 9.
4
Operation
• You can use various playback functions. Refer to
pages 31-35.
Options while viewing a photo
This step is needed only when a disc and a
USB device is connected simultaneously on
this unit.
4. Select a file using vVY, and press ENTER
( ) to view the photo.
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
2. Select an option using vV.
a
b
c
d
e
f
g
h
BD551-N.BPHLLLK-ENG.indd 41
10. 08. 27 �� 12:04
42
Operation
a Current photo/Total number of photos
– Use Y to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Music Select – Select the background
music for the slide show (page 42).
d Music –Press ENTER ( ) to start or pause
background music.
e Rotate – Press ENTER ( ) to rotate the
photo clockwise.
f Zoom – Press ENTER ( ) to display the
[Zoom] menu.
g Effect – Use Y to select a transition
effect between photos in a slide show.
h Speed – Use Y to select a delaying
speed between photos in a slide show.
4
3. Press RETURN(O) to exit the option menu.
4. Select a file using vVY, and press ENTER
( ) to view the photo.
5. Press INFO/DISPLAY ( ) to display the
option menu.
6. Use vV to select [Music Select] option,
and press ENTER ( ) to display the [Music
Select] menu.
7. Use vV to select a device, and press ENTER
( ).
8. Use vV to select a file or a folder you wish
to play.
Operation
Listening to music while slide
show
You can display photo files while listening to
audio files.
1. Press HOME (
).
Select a folder and press ENTER ( ) to
display the lower directory.
Select and press ENTER ( ) to display
the upper directory.
2. Select [Photo] using Y, and press
ENTER ( ).
9. Use B to select [OK], and press ENTER ( )
to complete music selection.
3. Select [Data] or [USB] option using Y,
and press ENTER ( ).
BD551-N.BPHLLLK-ENG.indd 42
10. 08. 27 �� 12:04
Operation
Listening to music
43
Displaying MP3 music
information (ID3 Tag)
1. Select a music file using vVY
The player can play Audio CDs and audio files.
1. Press HOME (
).
2. Press DISPLAY/INFO ( ) to display the
option menu.
3. Select [Information] option using vV, and
press ENTER ( ).
4. The music information will be displayed on
the screen.
2. Select [Music] using Y, and press ENTER ( ).
3. Select the [Data] or [USB] option using Y,
and press ENTER ( ).
4
Depending on the MP3 files, information may not
be displayed on the screen.
This step is needed only when a disc and a
USB device is connected simultaneously on
this unit.
4. Select a music file or audio track using
vVY, and press ENTER ( ) to play the
music.
Operation
NOTE
Audio CD Recording
You can record one desired track or all of the
tracks in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port
on the front panel.
2. Press Z (OPEN/CLOSE), and place an Audio
CD on the disc tray.
Press Z (OPEN/CLOSE) to close the disc
tray. The playback starts automatically.
3. Press INFO/DISPLAY to display the option
menu.
NOTE
• The file requirements are described on page 9.
• You can use various playback functions. Refer to
pages 31-35.
BD551-N.BPHLLLK-ENG.indd 43
10. 08. 27 �� 12:04
44
Operation
4. Use vV to select [CD Recording] option,
and press ENTER ( ) to display the [CD
Recording] menu.
8. Use vVY to select [OK], and press ENTER
( ) to start Audio CD recording.
If you want to stop in progressing Audio CD
recording, press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
recording is completed. Press ENTER
( ) to check the music file created in the
destination folder.
5. Use vV to select a track you wish to copy
on the menu, and press ENTER ( ).
Repeat this step to select tracks as many as
you can.
4
Selects all the tracks on an Audio
CD.
Operation
Selects an encoding option from
the pop-up menu (128kbps,
192kbps or 320kbps).
Cancels the recording and
returns to the previous screen.
6. Use vVY to select [Start], and press
ENTER ( ).
7. Use vVY to select the destination folder
to be copied.
If you want to create a new folder, use
vVY to select [New Folder] and press
ENTER ( ).
NOTE
• The table below shows the average recording
time from an audio track with 4 minutes of
playback time to a music file with 192 kbps as an
example.
stop mode
while playback
1 min.
4 min.
• All times in the above table are approximate.
• Actual recording time for USB storage device
varies depending on the USB storage device’s
ability.
• Make sure that there is minimum of 50 MB free
space is needed when recording into the USB
storage device.
• The length of the music should be longer than
20 seconds for the proper recording.
• Do not turn off this player or extract the
connected USB storage device during Audio CD
recording.
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Enter a folder name using virtual keyboard,
and press ENTER ( ) while [OK] is selected.
BD551-N.BPHLLLK-ENG.indd 44
10. 08. 27 �� 12:04
Maintenance
45
5
Maintenance
Notes on Discs
Handling the Unit
Handling Discs
When shipping the unit
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints
do not get on the surface. Never stick paper or
tape on the disc.
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Storing Discs
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
• Do not use volatile liquids such as
insecticide spray near the unit.
Cleaning Discs
• Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
5
Maintenance
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the center to out.
• Wiping with strong pressure may damage
the surface.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service center.
BD551-N.BPHLLLK-ENG.indd 45
10. 08. 27 �� 12:04
46
Troubleshooting
6
Troubleshooting
General
Symptom
Cause & Solution
The Power does not
turned on.
• Plug the power cord into the wall outlet securely.
The unit does not start
playback.
• Insert a playable disc. (Check the disc type, color system, and
regional code.)
• Place the disc with the playback side down.
• Place the disc on the disc tray correctly inside the guide.
• Clean the disc.
• Cancel the Rating function or change the rating level.
The angle cannot be
changed.
• Multi-angles are not recorded on the BD/DVD Video being
played.
Cannot play movie,music
or photo files.
• The files are not recorded in a format that the unit can play.
The remote control does
not work properly.
• The remote control is not pointed at the remote sensor of
the unit.
• The unit does not support the codec of the movie file.
• The remote control is too far from the unit.
6
Troubleshooting
• There is an obstacle in the path of the remote control and
the unit.
• The battery in the remote control is exhausted.
The unit is plugged in, but
the power will not turn on
or off.
You can reset the unit as follows.
• Unplug the power cord, wait at least five seconds, and then
plug it in again.
The unit is not operating
normally.
BD551-N.BPHLLLK-ENG.indd 46
10. 08. 27 �� 12:04
Troubleshooting
47
Picture
Symptom
Cause & Solution
There is no picture.
• Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
• Connect the video connection securely.
• Check the [HDMI Color Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
• Your TV may not support the resolution you have set on the
player. Change the resolution that your TV accepts.
• The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
Picture noise appears
• You are playing a disc recorded in a color system that is
different from your TV.
• Set the resolution which your TV accepts.
Sound
Symptom
Cause & Solution
There is no sound or the
sound is distorted.
• Connect the audio connection securely.
• The input source setting on the amplifier or the connection
to the amplifier is incorrect.
• The sound volume is low.
• Check that the connected amplifier is compatible with audio
format output from the player.
• The player’s HDMI OUT jack is connected to a DVI device. The
DVI jack does not accept audio signal.
6
Troubleshooting
• The unit is in scan, slow motion, or pause mode.
• Check the device connected to player’s HDMI OUT jack is
compatible with audio format output from the player.
BD551-N.BPHLLLK-ENG.indd 47
10. 08. 27 �� 12:04
48
Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not
work.
• The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
• Ensure that the unit is correctly connected to the local area
network and can access the internet (see pages 19-21).
• Your broadband speed may not fast enough to use the BDLive features. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
• The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Customer Support
You can update the Player using the latest software to enhance the products operation and/
or add new features. To obtain the latest software for this player (if updates have been made),
please visit http://lgservice.com or contact LG Electronics customer care center.
6
Troubleshooting
BD551-N.BPHLLLK-ENG.indd 48
10. 08. 27 �� 12:04
Appendix
49
7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons
below.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer
Code Number
LG
1(Default), 2
By pressing
You can
Zenith
1, 3, 4
1 (TV POWER)
Turn the TV on or off.
GoldStar
1, 2
Switch the TV’s input
source between the TV
and other input sources.
Samsung
6, 7
Sony
8, 9
Hitachi
4
AV/INPUT
Scan up or down
through memorized
channels.
VOL +/–
Adjust the volume of
the TV
TV MUTE
Turn the TV’s volume on
or off.
BD551-N.BPHLLLK-ENG.indd 49
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
Appendix
PR/CH +/–
7
10. 08. 27 �� 12:04
50
Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to
a broadband home network. If there is new
software available and the unit is connected
to a broadband home network, the player will
inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2. Use Y to select a desired option and then
press ENTER ( ).
Option 2:
If the software update is available from the
update server, the “Update” icon appears at
the bottom of the Home menu. Press blue (B)
colored button to start the update procedure.
Software Update
You can update the player using the latest
software to enhance the products operation
and/or add new features. You can update the
software by connecting the unit directly to the
software update server.
CAUTION
• Before updating the software in your player,
remove any disc and USB Device from the player.
• Before updating the software in your player, turn
the player off and then turn it back on.
• During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power and
turn it on for stable performance.
• This unit cannot be updated to previous
software version.
[OK]
Starts the software update.
7
Appendix
[Cancel]
Exits the update menu and displays it next
booting.
1. Check the network connection and settings
(page 19-21).
2. Select [Software] option in the [Setup]
menu then press ENTER ( ).
3. Select [Update] option, and press ENTER
( ).
[Hide]
Exits the update menu and it does not
appear until next software is uploaded in
the update server.
The player will check for the newest update.
BD551-N.BPHLLLK-ENG.indd 50
10. 08. 27 �� 12:04
Appendix
NOTE
• Pressing ENTER ( ) while checking for the
update will end the process.
• If there is no update available, the Message, “
No update is found.” appears. Press ENTER( ) to
return to the [Home Menu].
4. If newer version exists, the message “A
new update was found. Do you want to
download it?” appears.
51
NOTE
If the software includes the driver update, disc tray
may open during the process.
9. When update is completed, the message, “
Update is complete.” will appear, and then
power will turn off automatically after 5
seconds.
10.Turn the power back on. The system now
operates with the new version.
NOTE
5. Select [OK] to download the update.
(Selecting [Cancel] will end the update.)
The Software Update function may not work
properly depending on your Internet environment.
In this case, you can obtain the latest software from
the authorized LG Electronics Service Center then
update your player. Refer to “Customer Support” on
page 48.
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your
home network condition)
7. When downloading is completed, the
message, “Download is complete. Do you
want to update?” appears.
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To
update software the next time, the software
update procedure has to be started from
the beginning again.)
Do not turn off the power during the software
update.
BD551-N.BPHLLLK-ENG.indd 51
Appendix
CAUTION
7
10. 08. 27 �� 12:04
52
Appendix
Area Code List
Choose an area code from this list.
Area
Code Area
Afghanistan 7
AF Fiji Code Area
Code Area
Code
FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia SI
Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway Canada CA India IN Oman Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal Czech Republic CZ Kuwait KW Romania Denmark DK Libya LY Russian
LU Federation Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
NO Switzerland CH
OM Taiwan TW
TH
PT Uruguay UY
RO Uzbekistan UZ
Vietnam RU Zimbabwe SA
VN
ZW
SN
Appendix
BD551-N.BPHLLLK-ENG.indd 52
10. 08. 27 �� 12:04
Appendix
53
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code Language
Code Language
Code Language
Code
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Language Code
Basque 6985
Hebrew 7387
Nepali 7869
Tajik 8471
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Tamil 8465
Bhutani 6890
Hungarian 7285
Oriya 7982
Telugu 8469
Bihari 6672
Icelandic 7383
Panjabi 8065
Thai 8472
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Tonga 8479
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkish 8482
Burmese 7789
Irish 7165
Polish 8076
Turkmen 8475
Byelorussian 6669
Italian 7384
Portuguese 8084
Twi 8487
Chinese 9072
Japanese 7465
Quechua 8185
Ukrainian 8575
Croatian 7282
Kannada 7578
8582
6783
Kashmiri 7583 Rhaeto-Romance 8277
Urdu Czech Uzbek 8590
8279
Vietnamese 8673
6865
Kazakh 7575
Dutch 7876
Kirghiz 7589
Russian 8285
Volapük 8679
8377
English 6978
Korean 7579
Samoan Welsh 6789
Esperanto 6979
Kurdish 7585
Sanskrit 8365
Wolof 8779
Estonian 6984
Laothian 7679
Scots Gaelic 7168
Xhosa 8872
7665
Serbian 8382
Faroese 7079
Latin Yiddish 7473
Fiji 7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Yoruba 8979
Lingala Shona Zulu 9085
Finnish 7073
BD551-N.BPHLLLK-ENG.indd 53
7678
8378
7
Appendix
Danish Rumanian 10. 08. 27 �� 12:04
54
Appendix
Trademarks and
Licenses
“Blu-ray Disc™”, “Blu-ray™” and “Blu-ray disc™” logo are
trademarks of Blu-ray Disc Association.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode
video in compliance with the AVC Standard and VC-1
Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/
VC-1 Video that was encoded by a consumer engaged
in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/
VC-1 Video. No license is granted or shall be implied for
any other use. Additional information may be obtained
from MPEG LA, LLC. See http://www.mpegla.com.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
“BD-Live™” logo is a trademark of Blu-ray Disc
Association.
“BONUSVIEW™” is trademark of Blu-ray Disc
Association.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
7
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos, Symbol,
DTS-HD and DTS-HD Master Audio are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
DivX is a registered trademark of DivX, Inc., and is
used under license.
“x.v.Colour” is a trademark of Sony Corporation.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Appendix
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
BD551-N.BPHLLLK-ENG.indd 54
10. 08. 27 �� 12:04
Appendix
55
Audio Output
Specifications
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
AAC
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Digital Output (SPDIF) (DIGITAL AUDIO OUT) *4
Analog
2CH Output
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode*3 *5
DTS
DTS
DTS (2CH)
DTS
DTS
DTS
DTS
DTS
DTS
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
AAC
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Dolby Digital
Dolby Digital
Dolby Digital
AAC
DTS
DTS
PCM 2ch
PCM 2ch
PCM 2ch
HDMI OUT
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch *
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[HDMI] option is set to [Primary Pass-Thru].
3
DTS Re-encode*3 *5
DTS
DTS
DTS (2CH)
DTS
DTS
DTS
DTS
DTS
DTS
Primary Pass-Thru *1 *2 *3
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
AAC
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
*3 The [PCM Multi-CH]/[Primary Pass-Thru]
setting of the [HDMI] option and [DTS reencode] setting of the [Digital Output
(SPDIF)] option cannot be set together.
If you set them together, the [HDMI] or
[Digital Output (SPDIF)] option is set to
[PCM Stereo] automatically.
7
Appendix
*1 The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output (SPDIF)] or [HDMI] option
is set to [Primary Pass-Thru]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
BD551-N.BPHLLLK-ENG.indd 55
Primary Pass-Thru
*4 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited
to 96 kHz.
10. 08. 27 �� 12:04
56
Appendix
*5 If the [HDMI] or [Digital Output (SPDIF)]
option is set to [DTS re-encode], the audio
output is limited to 48 kHz and 5.1Ch. If the
[HDMI] or [Digital Output (SPDIF)] option is
set to [DTS re-encode], the DTS Re-encode
audio is outputted for BD-ROM discs, and
the original audio is outputted for the other
discs (like [Primary Pass-Thru]).
• Multi-channel Digital Surround Sound via
digital connection can only be obtained
if your receiver is equipped with a Digital
Multi-channel decoder.
• If [HDMI] option is set to [PCM Multi-CH]
and [Digital Output (SPDIF)] option is set to
[Primary Pass-Thru] while playback Dolby
Digital Plus or TrueHD audio, DIGITAL AUDIO
OUT is limited to “PCM 2ch”.
• If the HDMI connection is version 1.3
and Dolby Digital Plus/Dolby TrueHD is
outputted from HDMI OUT jack, DIGITAL
AUDIO OUT jack is limited to “PCM 2ch”
(When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
• The audio is outputted as PCM 48 kHz/16
bit for MP3/WMA file and PCM 44.1kHz/16
bit for Audio CD while playback.
• The Dolby TrueHD audio recorded on some
Blu-ray discs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITAL AUDIO OUT jacks and “DD”
displays on the screen if TrueHD audio is
not output (for example, when [HDMI] is set
to [PCM Stereo] and [Digital Output (SPDIF)]
is set to [Primary Pass-Thru]).
7
Appendix
• You must select a digital audio output
and a maximum sampling frequency that
your Amplifier (or AV receiver) accepts
using [Digital Output (SPDIF)], [HDMI] and
[Sampling Freq.] options on the [Setup]
menu (see page 26).
• With digital audio connection (DIGITAL
AUDIO OUT or HDMI), Disc Menu button
sounds of BD-ROM may not be heard if the
[Digital Output (SPDIF)] or [HDMI] option is
set to [Primary Pass-Thru].
• If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
BD551-N.BPHLLLK-ENG.indd 56
10. 08. 27 �� 12:04
Appendix
57
Video Output
Resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
480i
480p
480i
480p
480p
480p
720p
720p
720p
1080i
1080i
1080i
1080p/24 Hz
1080p / 24 Hz
1080p / 60 Hz
1080p / 60 Hz
-
1080i
1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
480i
480p
480p
480p
720p
720p
-
480i
1080i
1080i
-
480i
1080p/24 Hz
1080p / 24 Hz
-
480i
1080p / 60 Hz
1080p / 60 Hz
-
480i
HDMI OUT connection
• If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
480i
• The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT
Connection
7
BD and DVD video could prevent up-scaling
on analog output.
Appendix
• If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
480i
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.
When you set the HDMI Resolution, over 720p
is not outputted to Composite Video.
BD551-N.BPHLLLK-ENG.indd 57
10. 08. 27 �� 12:04
58
Appendix
Specifications
System
Laser:
Semiconductor laser
General
wavelength:
Power requirements:
AC 200 - 240 V ~ 50 / 60 Hz
Power consumption:
14 W
Dimensions (W x H x D):
Approx. 430 x 45 x 190 mm without foot
1.6 kg
Operating temperature:
5 °C to 35 °C
Operating humidity:
5 % to 90 %
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
7
Signal system:
Standard NTSC color TV system
Frequency response:
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Signal-to-noise ratio:
Net Weight (Approx.):
405 nm / 650 nm
More than 90 dB
(ANALOG OUT connectors only)
Harmonic distortion:
Less than 0.02 %
Dynamic range:
More than 95 dB
LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
Bus Power Supply (USB):
DC 5 V
500 mA
• Design and specifications are subject to
change without notice.
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A, Version 1.3)
Appendix
ANALOG AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
BD551-N.BPHLLLK-ENG.indd 58
10. 08. 27 �� 12:04
Appendix
Important Information
Relating to Network
Services
PLEASE READ CAREFULLY. USE OF THE NETWORK
SERVICES IS SUBJECT TO THE FOLLOWING TERMS
AND CONDITIONS.
Use of the Network Services requires an Internet
connection which is sold separately and for which
you are solely responsible. The Network Services may
be limited or restricted depending upon the quality,
capabilities and technical limitations of your Internet
service.
The Network Services belong to third parties and
may be protected by copyright, patent, trademark
and/or other intellectual property laws. The Network
Services are provided solely for your personal and
noncommercial use. Unless expressly authorized by
the respective content owner or service provider,
you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services accessible through this product.
BD551-N.BPHLLLK-ENG.indd 59
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER IN CONTRACT, TORT,
STRICT LIABILITY OR OTHERWISE, SHALL LG BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR
ATTORNEY FEES OR EXPENSES RELATING TO OR
ARISING OUT OF THE NETWORK SERVICES EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or
interrupted at any time, and LG makes no
representation or warranty that any Network Service
will remain available for any period of time. Use of the
Network Services may be subject to additional terms
and conditions of the respective third party service
provider. The Network Services are transmitted by
third parties by means of networks and transmission
facilities over which LG has no control. LG EXPRESSLY
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY
FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for
customer service related to the Network Services.
Any question or request should be made directly to
the respective Network Service providers.
“Network Service(s)” means the third party services
accessible through this product including but
not limited to all data, software, links, messages,
video and other content found thereon or used in
connection therewith.
“LG” means LG Electronics, Inc. its parent company
and all of their respective subsidiaries, affiliates and
related companies worldwide.
7
Appendix
LG IS NOT RESPONSIBLE FOR YOUR USE OF
THE NETWORK SERVICES. THE NETWORK
SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY
NETWORK SERVICE MADE AVAILABLE THROUGH
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO
THIS PRODUCT, YOUR COMPUTER, TELEVISION,
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
59
10. 08. 27 �� 12:04
60
Appendix
Open source software
notice
7
Appendix
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel, busybox, linux IR
control package, ntfs-3g, squashfs, u-boot
LGPL LIBRARIES: glibc, libmtp, libusb, libusbcompat
LG El ectronics offers to provide source code to
you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of
media, shipping and handling upon e-mail request
to LG Electronics at: opensource@lge.com
This offer is valid for a period of three(3) years from
the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
This product includes
• curl: copyright © 1996 - 2008, Daniel Stenberg
• expat: copyright © 2006 expat maintainers
• freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
• International Components for Unicode: copyright
© 1995-2010 International Business Machines
Corporation and others
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
• OpenSSL:
– cryptographic software written by Eric Young
(eay@cryptsoft.com).
– software written by Tim Hudson
(tjh@cryptsoft.com).
– software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
• xml2 : copyright © 1998-2003 Daniel Veillard
• WPA Supplicant : Copyright © 2003-2007, Jouni
Malinen <j@w1.fi> and contributors
• zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
BD551-N.BPHLLLK-ENG.indd 60
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
• HarfBuzz
Permission is hereby granted, without written
agreement and without license or royalty fees, to
use, copy, modify, and distribute this software and
its documentation for any purpose, provided that
the above copyright notice and the following two
paragraphs appear in all copies of this software.
IN NO EVENT SHALL THE COPYRIGHT HOLDER
BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF THIS
SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE
COPYRIGHT HOLDER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
• Unicode Bidirectional Algorithm
copyright © 1999-2009, ASMUS, Inc. All Rights
Reserved.
Distributed under the Terms of Use in http://www.
unicode.org/copyright.html.
THIS SOFTWARE IS PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT
OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA
OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE.
10. 08. 27 �� 12:04
BD551-N.BPHLLLK-ENG.indd 61
10. 08. 27 �� 12:04
BD551-N.BPHLLLK-ENG.indd 62
10. 08. 27 �� 12:04
Download PDF

advertising