LG | MDD64 | LG MDD64 Owner’s Manual

OWNER'S MANUAL
DVD Receiver System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
MDD64 (MDD64-A0U, MDS64V)
MDD104 (MDD104-A0U, MDS104V)
MDT354 (MDT354-A0U, MDS354V/W)
RDD264 (RDD264-A0U, RDS264V)
P/NO : MFL42956184
MDD64-A0U_BPHLLL ENG 6184.indd 1
2011-04-15 �� 3:24:45
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings shall be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; That is, a
single outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery pack, follow the steps in reverse order than the assembly.
To prevent contamination of the environment and bring on possible threat to human
and animal health, the old battery or the battery put in the appropriate container at
designated collection points. Do not dispose of batteries or battery together with other
waste. It is recommended that you use local, free reimburse ment system batteries
and accumulators. The battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
2
MDD64-A0U_BPHLLL ENG 6184.indd 2
2011-04-15 �� 3:24:45
Contents
Safety Precaution
Contents
Setting up
Hooking up the unit
Main unit
Remote control OSD Initial language setting - Optional
Initial Setting the Area Code Adjust the general settings
Setting the sound mode
Enjoying a pre-programmed sound field Setting the clock 2
3
4
5
6
7
8
8
8-10
10
11
11
Recording to USB
Recording to TAPE
Synchronized Recording from CD to Tape
17
18
18
Language Codes
Area Codes
Troubleshooting
Types of Playable Discs
Specifications
19
19
20
21
22
Displaying Disc Information
12
Playing a Disc
12-14
Viewing photo files
14
Listening to the radio
15
Listening to the cassette tapes
15
Listening to music from your external device
16
Using an USB device
16
3
MDD64-A0U_BPHLLL ENG 6184.indd 3
2011-04-15 �� 3:24:45
Setting up
Attaching the speakers to the unit
Connect the black end of each wire to the terminals marked - (minus) and the
other end to the terminals marked + (plus).
To connect the cable to the each speakers, press each plastic finger pad to
open the connection terminals on the back of each speaker. Insert the wire and
release the finger pad.
Be careful of the following
•B
e careful to make sure children not to put their hands or any objects into the
*speaker duct.
* Speaker duct : A hole for plentiful bass sound on speaker cabinet (enclosure).
MDT354 (2.1 channel)
COLOUR
SPEAKER POSITION
Red
Front
In front of you, to the right of the screen.
White
Front
In front of you, to the left of the screen.
Orange
Sub Woofer
This can be placed in any front position.
MDD64/MDD104/RDD264 (2 channel)
COLOUR
SPEAKER POSITION
Red
Front
In front of you, to the right of the screen.
White
Front
In front of you, to the left of the screen.
4
MDD64-A0U_BPHLLL ENG 6184.indd 4
2011-04-15 �� 3:24:46
Hooking up the unit
VIDEO OUT jack connection
Connect the VIDEO OUT jack on the unit
to the corresponding input jacks on your TV
using a Video cable.
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN) jacks
connection
Connect one end of the component
(Y PB PR) cable to the COMPONENT
VIDEO OUT (PROGRESSIVE SCAN)
jack on the unit and other end to the
COMPONENT INPUT jack on your TV.
Antenna connection
Fit the AM loop aerial to its stand
Connect the AM loop aerial to the unit.
Connect the FM aerial
The reception will be at its best when the two loose ends of
the aerial are in a straight line and horizontal.
AUX IN (L/R) jacks connection
Connect a VCR or Auxiliary device, etc. to the
INPUT jack of this unit.
Press the FUNCTION button on the remote control
until the “AUX” indicator is displayed in the display
window.
5
MDD64-A0U_BPHLLL ENG 6184.indd 5
2011-04-15 �� 3:24:46
Main unit
12 Z
OPEN/CLOSE: Open or close your CD
door.
13 D
ISC SKIP
1 Disc tray
2 1/\ STANDBY/ON
3 D
isplay window
4 C
LOCK
5 T
IMER
6 U
SER EQ
Choose a desired disc.
2
3
4
5
8 SET Confirms the settings.
6
(TIMER/ CLOCK)
CD II Pauses
PRESET(-)
.m TUNING(-)
USB Selects USB function.
DEMO In power off state to
demonstrate the function on display
window. To cancel it, press 1/\ or
this button again.
You can choose fixed sound
impression
1
7 S
elects DVD/CD function.
Selects TUNER function.
Selects TAPE function.
Selects AUX function.
14 E
Q
7
12
13
14
15
16
8
17
18
9
19
10
20
21
9 H
eadphone jack
10 USB connector
11 Cassette Door 1, 2
11
15 X
DSS
Extreme Dynamic Sound System
Reinforce the treble, bass and
surround effect.
MP3 OPT
Optimizes compressible MP3 files so
that it improves the bass sound.
16 REC/PAUSE(USB/TAPE)
17 L
G EQ
You can choose fixed sound
impression
18 C
D SYNC. CD to Tape Synchronized.
DUBB. Recording from tape to tape.
B PRESET (+)
M> TUNING(+)
x STOP
19 M
IC VOL. U/u
Adjust microphone volume.
20 MIC 1, 2
21 Volume control
Power Save Mode
You can set up the unit into an economic power save mode.
In power-on status, press and hold 1/\ button for about 3 seconds.
- Nothing is displayed in the display window when the unit is turned off.
To cancel, press 1/\.
6
MDD64-A0U_BPHLLL ENG 6184.indd 6
2011-04-15 �� 3:24:46
Remote control
1
1 POWER: Switches the unit ON or OFF.
FUNCTION: Changes the function.
SLEEP: Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
Z OPEN/CLOSE: Open or close your CD door.
TITLE: If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appear.
DISPLAY: Accesses On-Screen Display.
MENU: Accesses the menu on a DVD disc.
SETUP: Accesses or removes setup menu.
I i U u (left/right/up/down): Used to navigate
on-screen displays.
ENTER: Acknowledges menu selection.
PRESET (U u): Selects programme of Radio.
TUN. +/- (I i): Tunes in the desired radio station.
a
b
2
c
d
3
RETURN (O): Moving back wards in the menu.
REC (z): Recording to USB/ TAPE.
STOP (x): Stops playback or recording.
PLAY (B): Starts playback.
MO./ST.: MONO/STEREO FM mode state, selects MONO
or STEREO by pressing this button.
PAUSE/STEP(X): Pausing playback.
SCAN(bb/BB): Search backward or forward.
SKIP(./>): Go to next or previous chapter/track/Title.
4
D.SKIP: Choose a desired disc.
MUTE: To mute the sound.
VOL (Volume) +/-: Adjusts speaker volume.
EQ/ LG EQ (EQUALIZER Effect): You can choose sound
impressions.
0-9 numerical buttons: Selects numbered options in a menu.
REPEAT/RANDOM : To select a play mode. (Random,
repeat)
SUBTITLE: During playback, you can select a desired
subtitle language.
TV Control buttons : Controls the TV. (LG TV only)
Controlling the TV
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.
PROG./MEMO.: Accesses or removes Program menu.
MIC VOL.(+/ - ): Adjusts microphone volume.
ECHO VOL.(+/ - ): Adjusts echo volume.
VOCAL FADER: You can enjoy the function as karaoke, by
reducing singer vocal of music in the various source.
CLEAR: Removes a track number on the Program List.
Remote control Operation
Point the Remote Control at the display window and press
the buttons.
Remote control Battery Installation
1 Detach the battery cover on the rear of the remote control.
2 Insert the R03 (size AAA) battery with 3 and # aligned
correctly.
7
MDD64-A0U_BPHLLL ENG 6184.indd 7
2011-04-15 �� 3:24:46
OSD Initial language setting - Optional
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language.
ON REMOTE
Adjust the general settings
ON REMOTE
1 Display setup menu
SETUP
2 Select a desired option on the first level
Uu
3 Move to second level
i
4 Select a desired option on the second level Uu
1Turn the power on
The language list appears
POWER
5 Move to third level
i
2 Select the language UuIi
3 Press
ENTER
6 Change the setting
U u and
ENTER
4 To confirm press I i and ENTER
Initial Setting the Area Code
Adjust the general settings - More you can do
Adjust the language settings
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
1 Display setup menu SETUP
2Select LOCK menu on the first level
Uu
3Move to second level
The activated Area Code appears on the
second level.
i
4Move to the third level i
5Enter a new password
numerical buttons
(0-9) and ENTER
6Recheck the entered new password numerical buttons
(0-9) and ENTER
7Select a code for a geographic area
After select, Rating and Password will be activated. (page 19)
U u I i and
ENTER
8To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
ENTER
OSD – Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu – S
elects a language for the Audio/ Menu/
Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 19.
[Off] (for Disc Subtitle): Turn off Subtitle.
8
MDD64-A0U_BPHLLL ENG 6184.indd 8
2011-04-15 �� 3:24:46
Adjust the display settings
2.1 Speaker Setup (MDT354)
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV
screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary
ON REMOTE
1 Open the settings menu
SETUP
2 Select the audio icon
Uu
3Select right to enter the audio menu, then
select 2.1 Speaker Setup
i ENTER
4 Select the speaker you want to adjust
Ii
Progressive Scan
Progressive Scan Video provides the high quality pictures with less flickering. If
you are using the Component Video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set [Progressive Scan] to [On].
Press ENTER to confirm your selection
- If you not press ENTER within 10 seconds it will be [Off].
Adjust the audio settings
DRC (Dynamic Range Control) – M
ake the sound accurate when the volume
is turned down (Dolby Digital only). Set to
[On] for this effect.
Vocal – S
elect [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
5Select an option and change the settings
UuIi
6Set the output level (volume) of a speaker
from -5dB to +5dB.
Ii
7Test the signals of each speaker
Adjust the volume to your taste
according to these signals.
Ii
8Save your settings and exit the Setup
menu
O RETURN
9
MDD64-A0U_BPHLLL ENG 6184.indd 9
2011-04-15 �� 3:24:46
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers then correct it.
If you forget your password you can reset it. Press SETUP and Input ‘210499’
and press ENTER. The password has now been cleared.
Rating – S
elect a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: E
nter a new 4-digits password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code – S
elect a code for a geographic area as the playback rating level.
This determ­ines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on Page 19.
Adjust the others settings
DivX (R) Registration - We provide you with the DivXR VOD (Video on
demand) registration code that allows you to rent and purchase videos using the
DivXR VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registration
code of the unit.
Setting the sound mode
USER EQ
1
2
3
4
P
ress USER EQ.
"USER EQ" is displayed.
P
ress SET.
S
elect the sound effect you want among BASS(100HZ), MIDDLE(1kHz),
TREBLE(10kHz) by pressing PRESET(-)/PRESET(+).
5A
djust sound level by pressing .m/M>.
6T
o finish the setting, press SET.
VOCAL FADER
You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source. (MP3/ WMA/ CD/ etc.) Press the VOCAL FADER, and
“FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.
- This function is available to use only when a microphone is connected.
- The quality of the VOCAL FADER may be different depending on the
recording conditions of music files.
- It is not available on the MONO mode.
Semi Karaoke (optional) - W
hen a chapter/ title/ track is fully finished, this
function shows the score in the screen with a fanfare
sound.
10
MDD64-A0U_BPHLLL ENG 6184.indd 10
2011-04-15 �� 3:24:47
Enjoying a pre-programmed sound field
The system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ/ LG EQ.
The displayed items for the Equalizer may be different depending on sound
sources and effects.
ON DISPLAY
NATURAL
Local Specialization equalizer
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
MP3 OPT
XDSS ON
VIRTUAL
NORMAL(OFF)
Description
You can enjoy comfortable and natural sound.
Regionally optimized sound effect.(DANGDUT/ ARABIC/
PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SAMBA/
SALSA)
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock
, pop, jazz or classic concert.
This function is optimized for compressible MP3/WMA file. It improves the bass sound.
Reinforce the treble, bass and surround sound effect.
You can enjoy more virtual surround sound.
You can enjoy the sound without equalizer effect.
Setting the clock
ON UNIT
1 T
urn the power on
2 Press for at least 2 seconds
3 Choose from either
AM 12:00 (for an AM and PM display) or 0:00 (for
a 24 hour display)
4 Confirm your selection
5 Select the hours
6 Press
7 Select the minutes
8 Press
1/ |
CLOCK
.m/M>
SET
.m/M>
SET
.m/M>
SET
Using your player as an alarm clock
1P
ress and hold TIMER. Each functions flashes(Ex. TUNER, USB, ...)
2 Press SET when the function you want to be woken by is showing.
If you choose TUNER, “PLAY” and “REC” flashes in the display window
alternately.
3 Choose one of them by pressing the SET.
4 “ON TIME” will be displayed. This is where you set the time you want the
alarm to start. Use .m/M> to change the hours and minutes
and SET to save.
5 The “OFF TIME” will be displayed. This is where you set the time you
want the function to stop.
6 Use .m/M> to change the hours and minutes and press SET
to save.
7 You will be shown the volume (VOL) you want to be woken by. Use
.m/M> to change the volume and SET to save. Switch the
system off. The clock icon “ ” shows that the alarm is set.
8 When the system is turned off you can check the time the alarm and turn
the alarm on and off by pressing TIMER.
Fall asleep while listening to your player
ress SLEEP one or more times to select delay time between 10 and 180 minutes,
P
after the player will turn off. To check the remaining time, press SLEEP.
(DIMMER ON) -> SLEEP 180 -> ... -> SLEEP 10 -> (DIMMEER OFF)
*DIMMER: The LED (Light-emitting diode) of front panel is turned off and the display window will be darken by half.
11
MDD64-A0U_BPHLLL ENG 6184.indd 11
2011-04-15 �� 3:24:47
Displaying Disc Information
Playing a Disc
ON REMOTE
1 Press DISPLAY
1 Open the disc tray
2 Select an item Uu
2 Insert a disc
3 Adjust the Display menu settings Ii
3 Close the disc tray
4 To return the exit
DISPLAY
4 To Start playback
Displaying Disc Information - More you can do
You can select an item by pressing U u and change or select the setting by
pressing I i.
Current title (or track/ file)
number/total number of titles (or tracks/ files)
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
DVD
DivX Z OPEN/CLOSE
Z OPEN/CLOSE
B
B
STOP
x
Playing a Disc - More you can do
Playing a DVD that has a menu
DVD
Most DVDs now have menus which load first before the film begins to play. You
can navigate these menus using I i U u to highlight an option. Press PLAY
to select.
Skipping to the next/previous chapter/ track/ file
Pausing a playback
ALL
ALL
Press PAUSE/STEP (X) on the remote control to pause playback. Press B to
continue playback.
DVD
DivX
Press PAUSE/STEP (X) on the remote control repeatedly to play Frame-byFrame playback.
Symbol Used in this Manual
MP3 files WMA files Audio CDs Z OPEN/CLOSE
5 To stop playback
Frame-by-Frame playback
ALL ON REMOTE
Z OPEN/CLOSE
Press > to move to the next chapter/ track/ file.
Press . to return to the beginning of the current chapter/ track/ file.
Press . twice briefly to step back to the previous chapter/ track/ file.
Selected angle/total number of angles
Selected Sound/EQ mode
All discs and file listed below DVD and finalized DVD±R/RW DivX files ON UNIT
Playing repeatedly or randomly
MP3
WMA
ACD
ALL
1P
ress REPEAT/RANDOM repeatedly. The current track/ file will be played
back repeatedly or randomly.
2 To return to normal playback, press REPEAT/RANDOM repeatedly to select
[Off].
- Random play mode : only music files.
Selecting a subtitle language
DVD
DivX
During playback, press SUBTITLE on the remote control repeatedly.
Fast forward or fast reverse
12
MDD64-A0U_BPHLLL ENG 6184.indd 12
ALL
1 Press m or M on remote control during playback.
2Y
ou can change the various playback speed by pressing m or M repeatedly.
3 Press B to continue play at normal speed.
2011-04-15 �� 3:24:47
1.5 times faster playback
DVD
1 Press B when a disc is already playing to watch and listen.
2 B x1.5 will appear on the screen.
3 Press B again to return to normal playback speed.
Slow down the playing speed
DVD
1 While playback is paused, press m/M.
2 You can change the various playback speed by pressing m/M repeatedly.
3 Press B to continue play at normal speed.
Starting play from selected time
DVD
DivX
Searches for the starting point of entered time code.
1 Press DISPLAY then select clock icon. and then press ENTER.
2 Enter a time then press ENTER.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter
“11020” by using numerical buttons and press ENTER. If you enter the wrong
number, press CLEAR to enter again.
Last Scene Memory
DVD
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off
the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Changing the character set to display DivX® subtitle correctly
- Optional DivX
1 If the subtitle does not display properly, press and hold SUBTITLE about 3
seconds to display the language code menu.
2 Press SUBTITLE repeatedly to change the language code until the subtitle is
displayed properly.
DivX disc compatibility with this player is limited as follows
DivX
• Available resolution: within 800x600 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
•If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
•If the video and audio structure of recorded files is not interleaved,
either video or audio is outputted.
• Playable DivX file : ".avi", ".mpg", ".mpeg", ".divx"
•Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation
Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt).
•Playable Codec format : "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP4V3",
"3IVX".
• Playable Audio format : "AC3", "PCM", "MP3", "WMA".
• For Discs formatted in Live file system, you can not it on this player.
•If the name of movie file is different from that of the subtitle file, during
playback of a DivX file, subtitle may not be display.
• If you play a DivX file differ from DivXspec, it may not operate normally.
Screen Saver
The screen saver appears when you leave the unit in stop mode for about five
minutes.
System Select - Optional
You must select the appropriate system mode for your TV system. In DVD/CD
fanction, remove any disc that might be in the unit, press and hold
PAUSE/STEP (X) for more than five seconds to be able to select a system
(PAL, NTSC, AUTO).
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and
JPEG files together, you can select file type with MENU button on the remote
control.
13
MDD64-A0U_BPHLLL ENG 6184.indd 13
2011-04-15 �� 3:24:48
Creating your own program
WMA
MP3
ACD
You can play the contents of a disc in the order you want by arranging the order
of the songs on the disc. The program is cleared when the disc is removed.
1 Select a desired music then press PROG./MEMO. or select “
” and then
press ENTER to add the music to the program list.
2 To add all music in the disc, select “
” and then press ENTER.
3 Select a music from the program list then press ENTER to start programmed
playback.
4 To clear a music from the program list, select the music you want to clear
then press CLEAR or select “
” icon and then press ENTER.
To clear all music from the program list, select “
” then press ENTER.
Displaying file information (ID3 TAG )
MP3
While playing a MP3 file containing file information, you can display the
information or time by pressing DISPLAY repeatedly.
MP3 / WMA disc compatibility with this player is limited as follows
WMA
MP3
• Sampling frequency : within 32 to 48 kHz (MP3/ WMA)
• Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)
• File extensions : “.mp3”/ “.wma”/ JOLIET
• CD-ROM file format : ISO9660
• We recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.
• They should not contain special letters such as / ? * : “ < > l etc.
• The total number of files on the disc should be less than 999.
This unit requires discs and recordings to meet certain technical standards in
order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right
to grant such permission. Permission should always be sought from the
copyright owner.
Viewing photo files
ON UNIT
1 Open the disc tray
2 Insert a Disc
3 Close the disc tray
4S
elect a photo file on
the menu
Z OPEN/CLOSE
Z OPEN/CLOSE
Z OPEN/CLOSE
-
Uu
B
ENTER
STOP
x
5D
isplay the selected
file in full screen
6 To stop playblack
ON REMOTE
Z OPEN/CLOSE
Viewing photo files - More you can do
Viewing photo files as a slide show
1 Use I i U u to highlight
icon then press ENTER to start slide show.
2 You can change slide show speed using I i when
icon is highlighted.
Skipping to the next/previous photo
Press . or > to view the previous/next photo.
Rotating a photo
Use U u to rotate the photo in full screen.
Pausing a slide show
1 Press PAUSE/STEP (X).
2 Press B or X to continue the slide show.
JPEG disc compatibility with this player is limited as follows
JPEG disc compatibility with this player is limited as follows :
• Max pixel in width : 5 120 x 3 840, Progressive jpeg: 2 043 x 1 536
• Recording condition: ISO 9660 LEVEL 1/ JOLIET
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”
14
MDD64-A0U_BPHLLL ENG 6184.indd 14
2011-04-15 �� 3:24:48
Listening to the cassette tapes
Listening to the radio
1 Select FM/ AM
2 Select the radio station
ON UNIT
ON REMOTE
TUNER
FUNCTION
TUNING(-/+)
3 T
o ‘save’ a radio station
A preset number will show in
the display.
4 Select the preset number
PRESET(-/+)
5 T
o confirm press
Up to 50 radio stations can
be saved
6 T
o select a ‘saved’ station
press
TUN. +/PROG./MEMO.
PRESET U u
PROG./MEMO.
PRESET(-/+)
PRESET U u
Listening to the radio - More you can do
Looking for radio stations automatically
Press TUNING(-/+) on the front panel (TUN.- /TUN.+ on the remote control) for more than 0.5 second. The tuner will scan automatically and stop
when it finds a radio station.
Deleting all the saved stations
1P
ress and hold PROG./MEMO. on the remote control. “ERASE ALL”
shows.
2 Press PROG./MEMO. to erase all the saved stations.
ON UNIT
1
2
3
4
5
6
Open the tape door
Insert the tape
Close the tape door
Select the TAPE function
Start the tape playing
To stop a tape playing
Z PUSH EJECT
ON REMOTE
Z PUSH EJECT
TAPE
FUNCTION
B
B
STOP
x
Listen to the cassette tapes - More you can do
Playing Fast backward or Forward
After pressing .m/M> (bb/BB on the remote control) during
playback, press B at a point you want.
Dubbing
This function allows you to record from tape to tape.
1 Press TAPE to select “TAPE-1”.
2 Insert the tape as follows.
TAPE1 - Insert a playback tape to dub.
TAPE2 - Insert a blank tape.
3 Press DUBB. “DUBBING” shows. Dubbing starts.
4 To stop dubbing, press x.
NOTE: In case you use the tape for the first time push the Z PUSH EJECT to
open the tape door and then remove the cushion in it.
Improving poor FM reception
Press PLAY (B) (MO./ST.) on the remote control.
15
MDD64-A0U_BPHLLL ENG 6184.indd 15
2011-04-15 �� 3:24:48
Using an USB device
Listening to music from your
external device
The unit can be used to play the music from many types of external device.
ON UNIT
ON REMOTE
1 C
onnect the external device to the AUX
connector of the unit.
> If your TV has only one output for
audio(MONO), connect it to the
left(white) audio jack on the unit.
Your unit
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
2 Select the USB function.
ON REMOTE
USB
FUNCTION
B
B / ENTER
3 Select a file you want to play.
VCR, TV, ...
4 Start your media playing.
5 To stop, press
6 B
efore disconnecting the portable
USB device, change to any other
function.
2 T
urn the power on.
3 Select the AUX function.
4 Turn on the external device and start it
playing.
ON UNIT
1 C
onnect the USB device to the USB
port of the unit.
1/ |
POWER
AUX
FUNCTION
Uu
STOP
x
TUNER/TAPE/...
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• This USB Function may not be available depending on devices.
USB device requirement
evices which require additional program installation when you have connected
D
it to a computer, are not supported.
Look out for the follows
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1 000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• The unit can not be used as a storage device.
• USB port of the unit can not be connected to PC.
16
MDD64-A0U_BPHLLL ENG 6184.indd 16
2011-04-15 �� 3:24:48
When you are recording, look out for the following
Recording to USB
You can record a various sound source to USB.
1 Connect the USB device to the unit.
2 S
elect a mode in which you want to
record. (TUNER/ CD/ ....)
Play back a sound source first.
3 Start the recording.
> If you press the button on the remote
control, the display changed in the
following order,
“USB REC” <-> “TAPE REC”. Then press
the button on “USB REC” once more.
4 To stop recording, press
ON PLAYER
ON REMOTE
TUNER/TAPE/...
FUNCTION
REC/PAUSE
(USB)
z REC
STOP
x
Recording to USB - More you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is played during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
Program list recording
USB records after creating your own program if you want to record the track you
want (Audio CD only).
•You can check the recording percentage rate for the USB record on the
screen during the recording. (AUDIO, MP3/ WMA CD only)
•During recording MP3/ WMA, there is no sound.
•When you stop recording during playback, the file that has been recorded at
that time will be stored. (AUDIO CD Only)
•Do not remove the USB device during USB recording. If not, an incomplete
file may be made and not deleted on PC.
•If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
•Multi card reader device or External HDD can not be used for USB
recording.
• A file is recoreded by 128 Mbyte when you record for a long term.
• When you stop recording during playback, the file will not be stored.
• In the state CD-G disc, USB record is not operated.
• You may not record more than 999 files.
•The file number is saved automatically.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
the other sources
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offence.
This equipment should not be used for such purposes.
Be responsible
Respect copyrights
17
MDD64-A0U_BPHLLL ENG 6184.indd 17
2011-04-15 �� 3:24:48
Recording to TAPE
You can record a various sound source to TAPE.
ON UNIT
1 Open the tape deck.
> There are 2 tape decks on the unit, open
the second one.
2 Insert a blank tape and close the door.
3 Select a mode in which you want to
record.
4 Play back a sound source first.
5 Press
>T
he display changed in the following
order, “USB REC” <-> “TAPE REC”
6 Press the button once more when
“TAPE REC” is displayed.
> Recording starts.
7 To stop recording, press
ON REMOTE
PUSH EJECT
TUNER/USB/...
FUNCTION
B
B
REC/PAUSE
z REC
REC/PAUSE
z REC
STOP
x
Synchronized Recording from
CD to Tape
ON UNIT
ON REMOTE
PUSH EJECT
1 O
pen the tape deck and then insert
a blank tape.
> There are 2 tape decks on the unit,
open the second one.
2 Close the door and insert a CD.
Z OPEN/CLOSE Z OPEN/CLOSE
> Audio CD only
3 To select CD function, press
FUNCTION
DVD/CD
4 Press the button on a stop status to
CD SYNC.
move to CD synchronizing mode.
>R
ecording automatically starts
7 seconds later after “CD SYNC” blinks.
5 To stop, press
STOP
x
18
MDD64-A0U_BPHLLL ENG 6184.indd 18
2011-04-15 �� 3:24:48
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali, Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru
Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language Quechua Rhaeto-Romance
Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles
New Zealand Nigeria Norway Oman Pakistan Panama Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area Paraguay Philippines Poland Portugal Romania Russian Federation
Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SIB
ZA
KR
ES
Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
19
MDD64-A0U_BPHLLL ENG 6184.indd 19
2011-04-15 �� 3:24:48
Troubleshooting
Symptom
POWER
No power
RADIO
No sound
Some noise occurs.
Cause
Correction
The power cord is not plugged in.
Plug in the power cord.
The function switch is not set to the Radio mode.
There are electronic devices near the unit.
Set the switch to the Radio mode.
The antenna is positioned or connected poorly
Check the antenna connection and adjust its position
n unplayable disc is inserted.
A
The disc is placed upside down.
The disc is not placed within the guide.
Insert a playable disc.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Select the appropriate video input model on the TV so the
picture from the unit appears on the TV
Set the unit far from the devices.
DVD/CD
The unit does not start
playback
No picture
The TV is not set to receive the video signal
REMOTE CONTROL
The remote control does
not work properly.
The remote control is not pointed at the remote sensor of
the unit directly.
Point the remote control to remote sensor directly of the
unit.
The battery in the remote control is exhausted.
Replace the battery with new ones.
Record protect tabs are removed.
Cover holes on back edge of tape with tap.
TAPE
Unable to record
20
MDD64-A0U_BPHLLL ENG 6184.indd 20
2011-04-15 �� 3:24:49
About the x Symbol Display
Types of Playable Discs
Type
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
Logo
“ x ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.
Regional code
DVD-R: Video mode and finalized only
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit.
•M
ost DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
DVD+R: Video mode only
Supports the double layer disc also.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
DVD+RW: Video mode only
Copyrights
Audio CD: Music CDs or CD-R/ CD-RW in music CD
format that can be purchased.
In addition, this unit can play a DVD±R/RW and CD-R or CD-RW that
contains audio titles, MP3, WMA, JPEG files.
Depending on the conditions of the recording equipment or the CD-R/
RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs
may not be played on the unit due to the recording quality or physical
condition of the disc, or the characteristics of the recording device and
authoring software. The disc will not play if it has not been correctly
finalized. Player does not support these kinds of discs.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection
signals are recorded on some discs. When recording and playing the pictures
of these discs picture noise will appear. This product incorporates copyright
protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
21
MDD64-A0U_BPHLLL ENG 6184.indd 21
2011-04-15 �� 3:24:49
Specifications
General
Power supply Refer to main label.
Power consumption Refer to main label.
Net Weight MDD64: 5.4 kg
MDD104: 5.5 kg
MDT354: 5.8 kg
External dimensions (W x H x D) 274 x 334 x 344 mm
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating humidity
5 % to 85 %
Bus Power Suply (USB)
DC 5 V
500 mA
RDD264: 5.7 kg
Tuner
FM Tuning Range Intermediate Frequency AM Tuning Range
Intermediate Frequency 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
128 KHz
522 to 1,620 KHz or 522 to 1,710 KHz or 520 to 1,710 KHz
45 KHz
Amplifier
OUTPUT POWER DD64: 30 W x 2 (4 Ω)
M
MDD104: 50 W x 2 (4 Ω)
RDD264: 130 W x 2 (4 Ω)
MDT354: Front: 100 W x 2 (4 Ω)
Subwoofer: 150 W (3 Ω)
Cassette tape player
DVD/CD player
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
Video output
Component Video output
Speakers Type Impedance Rated Input Power
Max. Input Power
Net Dimensions (W x H x D) Net Weight (1 EA)
40 - 20 000 Hz
More than 75 dB (1 kHz)
More than 55 dB (1 kHz)
More than 80 dB
1.0 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω
(Pb)/(Pr) 0.7 V (p-p), 75 Ω
MDS64V Front Speaker
2 way 2 speaker
4Ω
30 W
60 W
219 x 331 x 330 mm
3.6 kg
F.F/REW Time
Frequency Response
Signal to Noise Ratio
Channel Separation
Erase Ratio
MDS104V
Front Speaker
2 Way 2 Speaker
4 Ω
50 W
100 W
219 x 331 x 330 mm
3.6 kg
120 sec (C-60)
250 - 8 000 Hz
43 dB
50 dB (P/B)/45 dB (R/P)
55 dB (MTT-5511)
MDS354V
Front Speaker
2 way 2 speaker
4 Ω
100 W
200 W
220 x 333 x 283 mm
3.7 kg
MDS354W
Subwoofer
1 Way 1 Speaker
3 Ω
150 W
300 W
274 x 333 x 342 mm
5.9 kg
RDS264V
Front Speaker
2 way 2 speaker
4Ω
130 W
260 W
214 x 382 x 301 mm
4.1 kg
Designs and specifications are subject to change without prior notice.
22
MDD64-A0U_BPHLLL ENG 6184.indd 22
2011-04-15 �� 3:24:49
MDD64-A0U_BPHLLL ENG 6184.indd 23
2011-04-15 �� 3:24:49
MDD64-A0U_BPHLLL ENG 6184.indd 24
2011-04-15 �� 3:24:49
Download PDF

advertising