LG | 14CC4RB | LG 14CC4RB Owner’s Manual

Color Television
OWNER'S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Internet Home Page : http://www.lge.com
P/N : MFL53455527-EN(MC059D)
Safety Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
bottom are provided for ventilation, and to insure
Cleaning
reliable operation of the television receiver, and to
Unplug this television receiver from the wall outlet
protect it from overheating. These openings must
before cleaning. Do not use liquid cleaners or
not be blocked or covered. The openings should
aerosol cleaners. Use a damp cloth for cleaning.
never be blocked by placing the television receiver
Do not use attachments not recommended by the
on a bed, sofa, rug, or other similar surface. This
television receiver manufacturer as they may
television receiver should not be placed in a builtcause hazards.
in installation such as a bookcase unless proper
Power Supply
ventilation is provided.
This television receiver should be operated only
It is recommended not to operate this unit near
from the type of power source indicated on the
speakers or big metallic furnitures in order to keep
marking label. If you are not sure of the type of
their magnetism from disturbing colors purity
power supplied to your home, consult your
(uniformity) on the screen.
television dealer or local power company.
Wet Location Marking:
Press the POWER button on the front panel or
Apparatus shall not be exposed to dripping or
side panel to turn off the TV when the TV set is
splashing and no objects filled with liquids, such
not being used for a long time.It is recommended
as vases, shall be placed on the apparatus.
to remove the plug from the wall outlet (Power point)
Use
Do not allow anything to rest on the power cord.
Do not locate this television receiver where the
cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Never push objects of any kind into this television
receiver through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock.
Never spill liquid of any kind on the television
receiver.
Disconnecting device from mains
Mains plug is the disconnecting device. The plug
must remain readily operable.
Installation
Do not use this television receiver near water, for
example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this television receiver on an
unstable cart, stand, or table. The television
receiver may fall, causing serious injury to a child
or an adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver.
Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting
kit approved by the manufacturer.
Slots and openings in the cabinet and the back or
Service
Do not attempt to service this television yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
Date of Purchase
Dealer Purchased from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Writing Model And Serial Numbers
The serial number and model number are found
on the back of this unit. The serial number is
unique to this unit. You should record requested
information here and retain this guide as a
permanent record of your purchase. Please retain
your purchase receipt as your proof of purchase.
CONTENTS
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
?
?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Various function ......................................6
Picture control .........................................7
Closed caption function
(some models)..........................................7
Troubleshooting check list......................8
Description of controls
3
Connection of external equipment
(some models)..........................................4
Antenna Connections..................................4
On screen menus.....................................4
Basic TV operation ..................................5
2
Description of controls
1
9. WIDE/ZOOM/ BUTTON (some models)
To select the desired picture format (4:3, 16:9
or ZOOM).
: No function.
10. MUTE BUTTON
To mute the sound. Again to restore the muted
sound.
11. TV/VIDEO BUTTON
To select TV, VIDEO or COMPONENT mode.
12. CAPTION BUTTON (some models)
To select the CAPTION mode.
Refer to "Closed caption function".
13. SLEEP BUTTON
To set the desired sleep time.
14. MEMORY/ERASE BUTTON (some models)
To memorize or erase the desired channel.
15. REVIEW BUTTON (some models)
To return to the previous channel.
16. PICTURE BUTTON (some models)
To display picture modes one by one.
10
2
3
11
4
12
5
6
7
8
13
15
9
16
Fitting Batteries in the Remote Control Unit
• Open the battery compartment cover on the back
side and insert the batteries with correct polarity.
• Apply 1.5V batteries of AAA type. Don’t mix the
used batteries with new batteries.
14
1. POWER BUTTON (or ON/OFF)
Refer to "Turning on/off the TV".
2. NUMBER BUTTONS (some models)
To select the desired channel directly.
3. APC (Auto Picture Control) BUTTON
To adjust the factory preset pictures
corresponding to the lighting around.
4. MENU BUTTON
To display on screen menus.
5. CHANNEL UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
ENTER (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote
control only).
6. FCR (Favorite Channel Review) BUTTON
To select the favorite channel.
Refer to "Favorite channel memory".
7. AUTO PRG. (Auto program) BUTTON (some
models)
To memorize channels by AUTO PROGRAM.
8. EYE/ BUTTON (some models)
To switch on or off eye picture.
Refer to "Enjoying the Eye Function".
: No function.
or
Front panel
-
3
POWER BUTTON (or ON/OFF)
Refer to "Turning on/off the TV".
REMOTE CONTROL SENSOR
STAND BY INDICATOR
Illuminates red when the TV is in standby
mode. Refer to "Turning on/off the TV".
TV/VIDEO BUTTON
To select TV, VIDEO or COMPONENT mode.
MENU BUTTON
To display on-screen.
CHANNEL UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
ENTER (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote
control only).
Connection of external equipment (some models)
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Here shown may be somewhat different from your set.
These are an example drawing of typical jack layout.
IN JACKS (some models) :Connect external equipment outputs (VCR, LASER DISC,
CAMCORDER) to these inputs. Press the TV/VIDEO button to select VIDEO or
VIDEO 1.
IN
AUDIO
VIDEO
Note:This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Antenna Connections
Connecting an Outdoor Antenna
For the best reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality. Before connecting it,
necessarily inspect them. Any service center can explain the various outdoor antennas available to you.
Note:Rod Antenna Sold Seperately.
Connecting a CATV Cable
If you subscribe to a CATV system, change the antenna connection as described below.
1. Remove the 300 to 75 ohm adapter or the cable from the set if attached.
2. Connect the CATV cable (75 ohm coaxial cable) to the antenna jack.
On screen menus
select a menu item.
3.Press the G button to display the sub menu or
the pull-down menu.
4.Change the setting of an item in the sub or pulldown menu withF / G or D / E.You can move to
the higher level menu with ENTER (A) or F
button and to move to the lower level menu
press the G button.
The dialogue between you and your set takes place
on screen with an operator menu .The buttons
required for the operating steps are also displayed.
Menu selection
1.Press the MENU button and then D / E button to
display each menu.
2.Press the G button and then D / E button to
CH.
CH.
Auto+prog.
Manual
Favorite++
Clock
Off_timer
On+_timer
Auto+_off+
{
{
{
Move++Next { Back}
+
{
{
{
{
Move++Next { Back}
+
+
+
CH.
CH.
APC
Contrast
Brightness
Color
Sharpness
Tint
++{
{
+{
+{
+{
+{
++++++
++++++
Move++Next { Back}
+
+
Language
Input
Key+lock
Caption+
Auto+demo
{
{
{
{
{
Move++Next+{+Exit}
4
TV programme
Basic TV operation
Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
may be different from your TV’s because it is just
an example to help you with the TV operation.
select the desired channel with the D / E buttons.
Using the A.PROG button
You can conveniently perform AUTO PROGRAM
using the AUTOPRG. button on the remote control.
1. Press the AUTOPRG. button.
2. Press the G or AUTOPRG. button.
The AUTO PROGRAM starts now.
If you want to stop auto programming, press the
ENTER (A) button.Only the channels searched up
to that time are memorized.
Notes : • If the programmed signal has poor
quality, memorize again in the Auto prog..
•AUTO PROGRAM stores all receivable channels
regardless of receiving signal (RF, Cable).
•If channels of general wireless TV and cable TV are
duplicated, press the number buttons (0 ~ 9) to
change as .
Turning on/off the TV
Press the POWER (or ON/OFF) button on the set.
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH D / E button on the set or
POWER, TV/VIDEO, CH D /E or number button
on the remote control.
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on
the set.
Channels of general wireless TV
Channels of Cable TV
Memorizing the Channels by
MANUAL PROGRAM
Using the MEMORY/ERASE button
You can conveniently perform MANUAL
PROGRAM using the MEMORY / ERASE button
on the remote control.
1. Press the D / E or NUMBER buttons to select the
channel number you want to memorize or erase.
2. Press the MEMORY/ERASE button to select
Memory or Erase .The on screen display
appears.
Selecting the on screen language
1. Press the MENU button and then D / E button
until the menu is displayed.
2. Press the G and then D / E button to select
Language.
3. Press the G and then use D / E button to
select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Repeatedly press the MENU button to exit.
Selecting the Channel
Press the D / E button to conveniently select the
upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select the
desired channel.
Memorizing Channels
This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
number buttons (0 ~ 9) to change as .
Adjusting the Volume
Press the G button to increase the volume level or
F button to decrease the volume level.
To mute the sound, Press the MUTE button.
The word Mute is displayed.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL F / G button.
oVolume
15
+++++++
Memorizing the Channels by
AUTO PROGRAM
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
EEMute
5
Various function
This feature can be used to prevent unauthorized
viewing.
Setting the Clock
Before setting the on/off timer, first you should set
the current time.
Notes : • With the key lock on, the display Key
lock appears on the screen if any button on the
front panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
Setting the Off Timer
This is the function to automatically switch the TV
to standby mode at a preset time.
Note: If the same time is set for the on time and
off time, only the off time operates.
Auto Demonstration
(some models)
Setting the On Timer
This is the function to automatically turn the TV on
at a preset time and channel.
Auto demonstration allows you to review all the
menus programmed in the TV set.
Notes: •If you don’t press any button within 2
hours after turning on the TV set by ON TIMER
function, the set will be automatically switched
back to standby mode.
•TV must be in standby mode for the On timer to
work.
Favorite channel memory
Favorite channel memory is a convenient feature
that lets you quickly scan up to five channels of
your choice without having to wait for the TV to
scan through all the in-between channels.
Setting the Sleep Time
To select the favorite channel, repeatedly press
the FCR (Favorite Channel Review) button. Eight
channels programmed appear on the screen one
by one.
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
--- →10 →20→30 →60 →90 →120→180→240
Adjusting the Fine
This function is to adjust the picture if poor signal
received from broadcasters causing horizontal
stripe, twisted picture, no color, and/or noise.
1. Press the MENU button and then D / E button
the until the menu is displayed as shown right.
2. Press the G and then D / E button to select
Manual..
3. Press the G and then D / E button to select
Fine.
4. Press the G button to enter the Fine mode.
5. Press the F / G button to tune the desired
picture condition.
6. Press the ENTER (A) button to memorize.
7. Repeatedly press the MENU button to exit.
Notes:
•After a few seconds, the desired sleep time will
disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the Sleep --mode by using the SLEEP button.
Notes : • To release the memorized fine tuning,
program again the fine-tuned channel by AUTO
PROGRAM or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the color
of the channel number changes to yellow.
Auto Off
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
Key Lock
The TV can be set so that the remote control is
needed to control it.
6
Picture control
Auto Picture Control
Adjusting the Picture
This is the function to manually adjust the desired
picture levels (Contrast, Brightness, Color,
Sharpness, Tint) of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item Tint is not displayed.
You can select picture modes programmed at
factory as you prefer.
Using the APC button
1. Press the APC button.
2. Press the APC button to select Clear,
Optimum, Soft or User.
3. Press the ENTER(A) button to exit.
Closed caption function (some models)
Closed captioning is a process which converts the
audio portion of a television program into written
words, which then appear on the television screen
in a form similar to subtitles. Closed captions
allow viewers to read the dialogue and narration
of television programs.
GHOSTS:
Ghosts are caused when the TV signal splits
and follows two paths. One is the direct path
and the other is reflected off tall buildings, hills
or other objects. Changing the direction or
position of the antenna may improve reception.
A SNOW:
If your receiver is located at the weak, fringe
area of a TV signal, your picture may be
marred by small dots. It may be necessary to
install a special antenna to improve the picture.
2. An old, bad or illegally recorded tape is played.
3. Strong, random signals from a car or airplane
interfere with the TV signal.
4. The signal from the antenna is weak.
5. The program wasn't captioned when it was
A
Using Closed Captions
Captions are the subtitles of the dialogue and
narration of television programs. For prerecorded
programs, program dialogue can be arranged into
captions in advance. It's possible to caption a live
program by using a process called “real-time
captioning”, which creates captions instantly.
Real-time captioning is normally done by
professional reporters using a machine shorthand
system and computer for translation into English.
Captioning is an effective system for the hearingimpaired, and it can also aid in teaching language
skills.
Using the Text Function
Text services give a wide variety of information on
all kind of subjects (ex. captioned program lists,
weather forecasts, stock exchange topics, news
for hearing-impaired---) through the full TV screen.
But not all stations offer text services, even
though they might offer captioning.
Note: In the event you receive a poor signal, an
empty black box may appear and disappear, even
when the text mode is selected. This is normal
function in such an event.
Caption Tips
• Not all TV broadcasts include closed caption
signals.
• Sometimes TV stations broadcast two different
caption signals on the same channel. By
selecting MODE 1 or MODE 2, you can choose
which signal you view. MODE 1 is usually the
signal with the captions, while MODE 2 might
show demonstration or programming
information.
• Your TV might not receive caption signals
normally in the following situations.
1. Poor reception conditions are encountered:
A IGNITION:
Picture may flutter, drift, suffer from black spots
or horizontal streaking. Usually caused by
interference from automobile ignition systems,
neon lamps, electrical drills and other electrical
appliances.
Operating the Caption and Text
Using the CAPTION button
1. Press the CAPTION button.
2. Press the CAPTION button to select OFF ,
Mode 1, Mode 2, Text 1 or Text 2.
3. Press the ENTER (A) button to exit.
Note: This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
7
Troubleshooting check list
SYMPTOMS
No power
No picture or sound
Poor picture but good sound
Poor reception
Lines in picture
Ghosts (multiple images)
Remote control does not work.
Cannot tune desired channel.
CHECK THESE THINGS
Is power cord plugged in?
Is television turned on?
Check batteries in remote control.
Try another channel (station trouble).
Check antenna connectings.
Check for local interference.
Adjust the antenna.
Adjust the picture control.
Program channel using AUTO
PROGRAM.
Download PDF