LG | 21FX4AL | LG 21FC1RB Owner’s Manual

User’s Guide Specification
21FU6RL-L4/L3
관 리 자
Irwan B I
09.02.17
1. Model Description
MODEL
담 당
K B KIM
08.09.09
LG
BRAND
Part No. MFL42505213_d
SUFFIX
2.
Product Name
CW81B
21FU6RL
Printing Specification
1. Trim Size (Format) : 150mm x 210 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Uncoated paper , 백상지 60 g/㎡
• Inside : Uncoated paper , 백상지 60 g/㎡
4. Printing Method : OFF-SET
5. Bindery : Saddle stitch
6. Language : English (1)
7. Number of pages : 12
N
O
T
E
S
3.
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Special Instructions
(1) Origin Notification
* LGESY : China
* LGENP : China
* LGEIN : Indonesia
* LGEDI : Indonesia
4.
* LGEVN : Vietnam
* LGEEG : Egypt
* LGETH : Thailand
* LGEMA : Poland
* LGEIL : India
* LGERA : Russia
* LGEAK : Kazakhstan * LGERS : Mexico
* LGEAZ : Brazil
Changes
j
i
h
g
f
e
d
09/02/17
Irwan B I
adding product dimension
c
09/02/09
Irwan B I
adding list models at cover
b
08/09/09
Auria F Y
adding model 21FU1RL-L3 model> cover n page 11
Auria F Y
Change product dimension >> page 11 ; add "auto demo" >> page 5
; add rev >> cover ; change "exit" to "enter" >> page 3 ; delete "front" >> page 4
a
REV.
NO.
08/07/22
YY/MM/DD
SIGNATURE
CHANGE NO.
CHANGE
CONTENTS
P/NO.MFL42505213_d
Total pages : 12 pages
Pagination sheet
Rear cover
Front cover
LG(EN)
P/No
Troublesho
oting check
list
2
3
….
….
11
Color Television
OWNER'S MANUAL
MODELS : 21FU6RL
21FC1RB
21FU6RL-L4
21FC1RB-L3
21FU1RL-L3
21FC2 RG-L3
21FU1RL
21FC2RG
21FX4AL
21FX4AL-L3
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Internet Home Page : http://www.lge.com.ph
P/N : MFL42505213 (CW81A/B) d
Safety Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Cleaning
Unplug this television receiver from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the
television receiver manufacturer as they may
cause hazards.
Power Supply
This television receiver should be operated only
from the type of power source indicated on the
marking label. If you are not sure of the type of
power supplied to your home, consult your
television dealer or local power company.
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The plug
must remain readily operable.
Installation
Do not use this television receiver near water, for
example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this television receiver on an
unstable cart, stand, or table. The television
receiver may fall, causing serious injury to a child
or an adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver.
Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting
kit approved by the manufacturer.
Slots and openings in the cabinet and the back or
bottom are provided for ventilation, and to insure
reliable operation of the television receiver, and to
protect it from overheating. These openings must
not be blocked or covered. The openings should
never be blocked by placing the television receiver
on a bed, sofa, rug, or other similar surface. This
television receiver should not be placed in a builtin installation such as a bookcase unless proper
ventilation is provided.
It is recommended not to operate this unit near
speakers or big metallic furnitures in order to keep
their magnetism from disturbing colors purity
(uniformity) on the screen.
Wet Location Marking:
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Use
Do not allow anything to rest on the power cord.
Do not locate this television receiver where the
cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Never push objects of any kind into this television
receiver through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock.
Never spill liquid of any kind on the television
receiver.
Service
Do not attempt to service this television yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
Writing Model And Serial Numbers
Date of Purchase
Dealer Purchased from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
The serial number and model number are found
on the back of this unit. The serial number is
unique to this unit. You should record requested
information here and retain this guide as a
permanent record of your purchase. Please retain
your purchase receipt as your proof of purchase.
CONTENTS
Antenna Connections.....................................10
Connection of external equipment
(some models).................................................10
Connecting DVD player (some models)................11
Product Dimension.............................................11
Troubleshooting check list.............Back cover
Description of controls ..............................3 ~ 4
On screen menus ..............................................5
Basic TV operation............................................6
Various function ...............................................7
Picture control ..................................................8
Sound control....................................................8
Closed caption function (some models).........9
2
Description of controls
1. POWER BUTTON (ON/OFF or
Refer to "Turning on/off the TV".
POWER
MUTE
1
11
APC
TV/VIDEO
12
4. MENU BUTTON
To display on screen menus.
13
5. CH(or PR) UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu is
displayed on the screen.
CAP
U
4
MEN
TION
CH
5
VOL
VOL
ENTER
CH
6
7
8
9
2. NUMBER BUTTONS
To select the desired channel directly.
3. APC (Auto Picture Control) BUTTON
To adjust the factory preset pictures
corresponding to the lighting around.
2
3
)
EP
FCR
EYE/
SLE
AUTOPRG.
MEMORY
/ERASE
REVIEW WIDE/ZOOM PICTURE
14
15
16
10
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
ENTER (A) BUTTON
• To enter from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote control
only).
6. FCR (Favorite Channel Review) BUTTON
To select the favorite channel.
Refer to "Favorite channel memory".
7. AUTO PRG./A.PROG (Auto program) BUTTON
To memorize channels by AUTO PROGRAM.
EYE/
REVIEW
AUTOPRG.
MTS
8. EYE/ BUTTON (some models)
To switch on or off eye picture.
Refer to "Enjoying the Eye Function".
: No function.
MEMORY
/ERASE
PICTURE
17
9. REVIEW BUTTON (some models)
To return to the previous channel.
10. WIDE/ZOOM/ BUTTON (some models)
To select the desired picture format (4:3, 16:9 or
ZOOM).
: No function.
11. MUTE BUTTON
To mute the sound. Again to restore the muted
sound.
12. TV/VIDEO BUTTON (some models)
To select TV, VIDEO or COMPONENT mode.
3
1
14
7
3
2
POWER TV/VIDEO
SLEEP
APC
A.PROG MEMORY/ERASE CAPTION
1
2
3
4
5
6
7
8
9
11
12
15
13
CH
5
VOL
ENTER
18.
VOL
CH
9
4
17
MENU
REVIEW
MTS
PICTURE
16. PICTURE BUTTON
To display picture modes one by one.
17. MTS BUTTON (some models)
To listen to the MTS sound.
FCR
MUTE
14. SLEEP BUTTON
To set the desired sleep time.
15. MEMORY/ERASE BUTTON (some models)
To memorize or erase the desired channel.
6
0
13. CAPTION BUTTON (some models)
To select the CAPTION mode.
Refer to "Closed caption function".
EYE/
8
18
(some models)
No function.
Note: Fitting Batteries in the Remote Control Unit
• Open the battery compartment cover on the back
side and insert the batteries with correct polarity.
• Apply two 1.5V batteries of AAA type. Don’t mix the
used batteries with new batteries
16
Panel Information
-
POWER BUTTON (or ON/OFF)
Refer to "Turning on/off the TV".
-
STAND BY INDICATOR
Illuminates red when the TV is in standby mode.
Refer to "Turning on/off the TV".
-
REMOTE CONTROL SENSOR
- TV/VIDEO ( A ) BUTTON
To select TV, VIDEO or COMPONENT mode.
-
MENU BUTTON
To display on-screen.
- CHANNEL UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
4
On screen menus
The dialogue between you and your set takes place
on screen with an operator menu .The buttons
required for the operating steps are also displayed.
button to select a menu item.
3.Press the G button to display the sub menu or
the pull-down menu.
4.Change the setting of an item in the sub or pulldown menu with F / G or D / E. You can move
to the higher level menu with ENTER (A) or F
button and to move to the lower level menu
press the G button.
Menu selection
1.Press the MENU button and then use the D / E
button to display each menu.
2.Press the G button and then use the D / E
Channel
CH.
Manual
Auto+prog.
Manual
Manual
Favorite++
{
{{
{
Channel
Channel
Memory
Fine
To+set
Move++Next { Back}
+
+
{
{
{
TV
3
Move++Next { Back}
+
+
Picture
CH.
Channel
APC
APC
XD
Contrast
Brightness
Color
Sharpness
Tint
++++++
+++{ {
{
{
{
{
{
{
Clear
Optimum
Soft
User
CH.
Auto+prog.
{
Manual
{
Favorite+channel+{{
Favorite
Move++Next { Back}
+
+
Move++Next { Back}
+
Sound
CH.
DASP
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
+
+++{ {
{
{
{
{
{
Flat
Music
Movie
Sport
User
Move++Next { Back}
+
+
Timer
CH.
Clock
Clock
Off_timer
On+_timer
Auto+_off+
{
{
{
{
{
__:__+AM
__
AM
Move++Next { Back}
+
+
Special
CH.
Language
Input
Key+lock
Caption+
Auto+D e m o
+
{
{
{
{
{
On
Off
Move++Next+{+Back}
5
+
CATV++95
_____
_____
_____
_____
_____
_____
_____
Basic TV operation
Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
may be different from your TV’s because it is
just an example to help you with the TV
operation.
remote control.
1. Press the AUTO PRG./A.PROG button.
2. Press the G or AUTO PRG./A.PROG button.
The AUTO PROGRAM starts now.
If you want to stop auto programming, press the
ENTER (A) button.
Only the channels searched up to that time are
memorized.
Notes: •If the programmed signal has poor
quality, memorize again in the Auto prog.
•AUTO PROGRAM stores all receivable channels
regardless of receiving signal (RF, Cable).
•If channels of general wireless TV and cable TV
are duplicated, press the number buttons (0 ~ 9) to
change as .
Turning on/off the TV
Press the POWER (or ON/OFF) button on the set.
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH D / E button on the set or
POWER, TV/VIDEO, CH D /E or number button
on the remote control.
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on
the set.
Channels of general
wireless TV
Channels of
Cable TV
Using the MENU button
1. Press the MENU button and then use the D / E
button the until the menu is displayed as shown
right.
2. Press the G and then use the D / E button to
select Auto prog..
3. Press the G button to enter the Auto prog.
mode.
4. The AUTO PROGRAM starts now.
Selecting the on screen language
1. Press the MENU button and then use the D / E
button until the menu is displayed as shown
right.
2. Press the G and then use the D / E button to
select Language.
3. Press the G and then use the D / E button to
select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Repeatedly press the MENU button to exit.
Memorizing the Channels by
MANUAL PROGRAM
Using the MEMORY/ERASE button
You can conveniently perform MANUAL
PROGRAM using the MEMORY / ERASE button
on the remote control.
1. Press the D / E or NUMBER buttons to select
the channel number you want to memorize or
erase.
2. Press the MEMORY/ERASE button to select
Memory or Erase.
The on screen display appears as shown right.
Memorizing Channels
This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.One is called AUTO PROGRAM
and the other is called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
Selecting the Channel
Press the D / E button to conveniently select the
upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select the
desired channel.
Adjusting the Volume
Memorizing the Channels by
AUTO PROGRAM
Press the G button to increase the volume level or
F button to decrease the volume level.
To mute the sound, Press the MUTE button.
The word Mute is displayed.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL F / G button.
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
select the desired channel with the D / E buttons.
Using the AUTO PRG./A.PROG button
You can conveniently perform AUTO PROGRAM
using the AUTO PRG./A.PROG button on the
6
Various function
select On or Off.
4. Repeatedly press the MENU button to exit.
Setting the Clock
Before setting the on/off timer, first you should set
the current time.
Game (some models)
Setting the Off Timer
You can enjoy the TV game with this set.
This is the function to automatically switch the TV
to standby mode at a preset time.
Key Lock
The TV can be set so that the remote control is
needed to control it.
This feature can be used to prevent unauthorized
viewing.
Note: If the same time is set for the on time and
off time, only the off time operates.
Setting the On Timer
Notes: •With the key lock on, the display Key
Lock appears on the screen if any button on the
front panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
This is the function to automatically turn the TV on
at a preset time and channel.
Notes: •If you don’t press any button within 2 hours
after turning on the TV set by ON TIMER function, the
set will be automatically switched back to standby mode.
•TV must be in standby mode for the On timer to work.
Auto Demonstration (some models)
Setting the Sleep Time
Auto demonstration allows you to review all the
menus programmed in the TV set.
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
--- →10 →20→30 →60 →90 →120→180→240
Favorite channel memory
Favorite channel memory is a convenient feature
that lets you quickly scan up to five channels of
your choice without having to wait for the TV to
scan through all the in-between channels.
To select the favorite channel, repeatedly press
the FCR (Favorite Channel Review) button. Eight
channels programmed appear on the screen one
by one.
Notes: •After a few seconds, the desired sleep
time will disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the SLEEP --mode by using the SLEEP button.
Adjusting the Fine
This function is to adjust the picture to stable
condition when it is poor, for example, a horizontal
stripe, twisted picture or no color in broad-casting.
Notes: •To release the memorized fine tuning,
program again the fine-tuned channel by AUTO
PROGRAM or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the color
of the channel number changes to yellow.
Auto Off
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
1. Press the MENU button and then use the D / E
button the until the menu is displayed as shown
right.
2. Press the G and then use the D / E button to
select Auto off.
3. Press the G and then use the D / E button to
7
Picture control
models), Clear, Optimum, Soft or User.
3. Press the ENTER(A) button to exit.
Enjoying the Eye Function
(some models)
The set will automatically adjust the picture
according to the surrounding conditions with the
display Magic eye.
1. Press the EYE/ button on the remote control.
The display Magic eye appears and the
picture is adjusted.
2. Press the EYE/ button again to switch the
Eye function off.
Adjusting the Picture
Auto Picture Control
XD (some models)
Using the APC button
XD is LG Electronic’s unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Note: When selecting APC options, XD is
automatically change to Off.
This is the function to manually adjust the desired
picture levels (Contrast, Brightness, Color,
Sharpness, Tint) of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item Tint is not displayed.
You can select picture modes programmed at
factory as you prefer.
1. Press the APC button.
2. Press the APC button to select Magic eye (some
Sound control
Enjoying the Stereo/SAP
Broadcast(some models)
Turbo Sound (some models)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate in
the video mode.
X-wave (Wireless Sound) (some models)
You can also listen to the sound through the FM receiver.
1. Press the MENU button and then use the D / E
button the until the menu is displayed as shown
right.
2. Press the G and then use the D / E button to
select X-WAVE.
3. Press the G and then use the D / E button to
select Set Freq..
4. Press the G button to tune in a frequency on the
X-wave menu.
5. Use the number 0 to 9 or press the F / G button
to match the TV’s frequency and the FM
receiver’s.
Note:
1. If the reception is poor or weak, select a
different frequency.
2. For best results, there should be no more that
5m(16.4ft) between the TV and FM Receiver.
3. In certain areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
4. The reception sensitivity may depend on the
kinds of receiver (FM radio).
Using the MTS Button
1. Press the MTS button to select your desired
MTS mode.
Each time you press this button, the MONO,
STEREO or SAP mode appears in turn.
2. Press the ENTER (A) button to exit.
Notes:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected STEREO or SAP.
• Mono sound is automatically received if the
broadcast is only in Mono; even though STEREO
or SAP has been selected.
• Select MONO if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.
Auto Sound Control
You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
1. Press the MENU button and then use the D / E
button to select the Sound menu.
2. Press the G and then use the D / E button to
select DASP.
3. Press the G and then use the D / E button to
select Flat, Music, Movie, Sports or User.
4. Repeatedly press the MENU button to exit.
AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level
even if you change channels.
Adjusting the treble (some models)
This function is to increase or decrease treble.
Adjusting the bass (some models)
This function is to increase or decrease bass.
8
Closed caption function (some models)
Closed captioning is a process which converts the
audio portion of a television program into written
words, which then appear on the television screen
in a form similar to subtitles. Closed captions allow
viewers to read the dialogue and narration of
television programs.
A
SNOW:
If your receiver is located at the weak, fringe
area of a TV signal, your picture may be marred
by small dots. It may be necessary to install a
special antenna to improve the picture.
Using Closed Captions
Captions are the subtitles of the dialogue and
narration of television programs. For prerecorded
programs, program dialogue can be arranged into
captions in advance. It's possible to caption a live
program by using a process called “real-time
captioning, which creates captions instantly.
Real-time captioning is normally done by
professional reporters using a machine shorthand
system and computer for translation into
English. Captioning is an effective system for the
hearing-impaired, and it can also aid in teaching
language skills.
2 An old, bad or illegally recorded tape is played.
3 Strong, random signals from a car or airplane
interfere with the TV signal.
4 The signal from the antenna is weak.
5 The program wasn't captioned when it was
produced, transmitted or taped.
Using the Text Function
Text services give a wide variety of information on
all kind of subjects (ex. captioned program lists,
weather forecasts, stock exchange topics, news
for hearing-impaired---) through the full TV screen.
But not all stations offer text services, even though
they might offer captioning.
Caption Tips
• Not all TV broadcasts include closed caption
signals.
• Sometimes TV stations broadcast two different
caption signals on the same channel. By
selecting MODE 1 or MODE 2, you can choose
which signal you view. MODE 1 is usually the
signal with the captions, while MODE 2 might
show demonstration or programming information.
• Your TV might not receive caption signals
normally in the following situations.
1 Poor reception conditions are encountered:
A IGNITION:
Picture may flutter, drift, suffer from black spots
or horizontal streaking. Usually caused by
interference from automobile ignition systems,
neon lamps, electrical drills and other electrical
appliances.
Note: In the event you receive a poor signal, an
empty black box may appear and disappear, even
when the text mode is selected. This is normal
function in such an event.
Operating the Caption and Text
Using the CAPTION button
1. Press the CAPTION button.
2. Press the CAPTION button to select OFF ,
Mode 1, Mode 2, Text 1 or Text 2.
3. Press the ENTER (A) button to exit.
Using the MENU button
A
1. Press the MENU button and then use the D / E
button to select the Special menu.
2. Press the G and then use the D / E button to
select Caption.
3. Press the G button and then use the D / E
button to select Off,
Mode 1, Mode 2, Text 1 or Text 2.
4. Repeatedly press the MENU button to exit.
Note: This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
GHOSTS:
Ghosts are caused when the TV signal splits
and follows two paths. One is the direct path
and the other is reflected off tall buildings, hills
or other objects. Changing the direction or
position of the antenna may improve reception.
9
Antenna Connections
Connecting an Outdoor Antenna
into 75 ohm antenna jack.
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to
the antenna jack.
For the best reception, we recommend you use an
outdoor antenna.
Severely weathered antennas and antenna cables
can reduce the signal quality. Before connecting it,
necessarily inspect them. Any service center can
explain the various outdoor antennas available to
you.
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to screws on the
300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
Connecting a CATV Cable
If you subscribe to a CATV system, change the
antenna connection as described below.
1. Remove the 300 to 75 ohm adapter or the
cable from the set if attached.
2. Connect the CATV cable (75 ohm coaxial
cable) to the 75 ohm antenna jack.
Connection of external equipment (some models)
Note: In some mono models, when the input jacks
on the front panel and back panel are connected to
external equipments at the same time, the input
jacks on the front panel have priority over the
input jacks on the back panel of the TV.
You can connect additional equipment, such as
VCRs, camcorders etc. to your set. Here shown
may be somewhat different from your set. These
are an example drawing of typical jack layout.
1. IN 1 JACKS: Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select VIDEO1 or VIDEO.
2. IN 2 JACKS: Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select VIDEO2 or S-VIDEO.
3. OUT JACKS: Connect external equipment
inputs (VCR, Audio amplifier) to these outputs
for recording or monitoring the selected
program.
4. §/ EARPHONE JACK (some models): In
some models, this jack is located on the front or
side of TV.
Note: This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
Connecting the S-VHS VCR
(some models)
1. Connect the S-VHS output jack of the VCR to the
S-VIDEO jack on the side or back of TV.
2. Connect the audio/video output jacks of the VCR
to the IN 2(A/V) jacks on the front or side of TV.
3. Press the TV/VIDEO button to select S-VIDEO.
4. Press the PLAY button on the VCR.
The video playback is visible on the TV screen.
VCR Recording
(some models)
1. Connect the audio/video input jacks of the
recording VCR to the OUT (A/V) jacks on the back.
2. Select the program number on the TV.
3. Set the recording VCR to record.
Connecting AUDIO/VIDEO IN Jacks
Recording a program from connecked other equipment
1. Connect the audio/video output jacks of the VCR to
IN 1(A/V) jacks on the side or back of TV.
2. Press the TV/VIDEO button to select VIDEO1 or
VIDEO.
Note: In some stereo models, if you connect the
audio/video output jacks of the VCR to the IN 2 (A/V)
jacks on the front or side of TV, select VIDEO2.
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
Note: In case of MONO VCR, connect the output
jack of VCR to the AUDIO L/MONO IN jack of TV
so that the sound can be heard from both speakers.
If you connect it to the AUDIO R IN jack of TV the
sound is heard only from right speaker.
(some models)
1. Connect the output jacks of the playback VCR
to the IN 1(A/V) jacks on the side or back of TV.
2. Connect the input jacks of the recording VCR to
the OUT (A/V) jacks on the back of TV.
3. Press the TV/VIDEO button to select VIDEO1
or VIDEO.
If you connect it to the IN 2 (A/V) jacks on the
side of TV, you should select VIDEO2.
4. Press the PLAY button on the playback VCR
and set the recording VCR to record.
10
Connecting DVD player (some models)
2.How to use
• Connect component DVD inputs to Y, PB, PR(480i)
and audio IN to audio(L/R) ports.
• Turn the set on and press the TV/VIDEO button
on the remote control or TV/VIDEO button on the
front panel to select COMPONENT.
•Try this after turning on the DVD set.
• Note: This TV is programmed to remember
which mode it was last set to, even if you turn the
TV off.
1.How to connect
TV INPUT
Y
DV D OUTPUT
Y
Y
Y
Y
PB
PR
Cb Cr
B -Y R -Y
Pb Pr
PB PR
Product Dimension
Models
Viewing Size (mm)
Depth (mm)
Height (mm)
21FU6RL-L4
21FU1RL-L3
510
510
603
603
329.5
329
455.3
455.3
21FC1RB
510
510
510
636
481.4
487
476.5
476.5
21FC2RG
21FX4AL
Width (mm)
636
636
11
476.5
481.4
Troubleshooting check list
SYMPTOMS
No power
No picture or sound
Poor picture but good sound
Poor reception
Lines in picture
Ghosts (multiple images)
Remote control does not work.
Cannot tune desired channel.
CHECK THESE THINGS
Is power cord plugged in?
Is television turned on?
Check batteries in remote control.
Try another channel (station trouble).
Check antenna connectings.
Check for local interference.
Adjust the antenna.
Adjust the picture control.
Program channel using AUTO
PROGRAM.
Download PDF