LG | 21FS4RK | LG 21FS4RK Owner’s Manual

Color Television
OWNER'S MANUAL
MODELS :
21FS4RK
21FS6RL
21FS4RK-LS
21FS6RL-LS
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Internet Home Page : http://ph.lge.com
P/N : 38289U0028A (MC059C)
Safety Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
never be blocked by placing the television receiver
on a bed, sofa, rug, or other similar surface. This
television receiver should not be placed in a builtin installation such as a bookcase unless proper
ventilation is provided.
It is recommended not to operate this unit near
speakers or big metallic furnitures in order to keep
their magnetism from disturbing colors purity
(uniformity) on the screen.
Cleaning
Unplug this television receiver from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the
television receiver manufacturer as they may
cause hazards.
Power Supply
This television receiver should be operated only
from the type of power source indicated on the
marking label. If you are not sure of the type of
power supplied to your home, consult your
television dealer or local power company.
Wet Location Marking:
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Use
Do not allow anything to rest on the power cord.
Do not locate this television receiver where the
cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Never push objects of any kind into this television
receiver through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock.
Never spill liquid of any kind on the television
receiver.
Installation
Do not use this television receiver near water, for
example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this television receiver on an
unstable cart, stand, or table. The television
receiver may fall, causing serious injury to a child
or an adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver.
Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting
kit approved by the manufacturer.
Slots and openings in the cabinet and the back or
bottom are provided for ventilation, and to insure
reliable operation of the television receiver, and to
protect it from overheating. These openings must
not be blocked or covered. The openings should
Service
Do not attempt to service this television yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
Writing Model And Serial Numbers
Date of Purchase
Dealer Purchased from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
The serial number and model number are found
on the back of this unit. The serial number is
unique to this unit. You should record requested
information here and retain this guide as a
permanent record of your purchase. Please retain
your purchase receipt as your proof of purchase.
2
CONTENTS
Description of controls ................................................................................................4 ~ 5
Basic TV operation .............................................................................................................6
Turning on/off the TV .....................................................................................................6
Selecting the on screen language .................................................................................6
Memorizing Channels ....................................................................................................7
Memorizing the Channels by AUTO PROGRAM ..........................................................7
Memorizing the Channels by MANUAL PROGRAM .....................................................8
Selecting the Channel ...................................................................................................8
Adjusting the Volume .....................................................................................................8
Various function .................................................................................................................9
Setting the Clock ...........................................................................................................9
Setting the Off timer........................................................................................................9
Setting the On timer........................................................................................................9
Setting the Sleep Time ................................................................................................10
Auto Off .......................................................................................................................10
Game (some models) ...................................................................................................11
Key Lock.......................................................................................................................11
Favorite channel memory .............................................................................................12
Adjusting the Fine.........................................................................................................12
Picture control ..................................................................................................................13
Enjoying the Eye Function (some models) ...................................................................13
Auto Picture Control ....................................................................................................13
Adjusting the Picture.....................................................................................................14
XD (some models)........................................................................................................14
Sound control ...................................................................................................................15
Enjoying the Stereo/SAP Broadcast (some models) ....................................................15
Auto Sound Control ......................................................................................................15
Turbo Sound (some models) ........................................................................................16
X-WAVE(Wireless Sound) (some models) ...................................................................16
AVL (Auto Volume Leveler) .........................................................................................17
Adjusting the balance (some models) ..........................................................................17
Adjusting the treble (some models) ..............................................................................17
Adjusting the Bass (some models) ...............................................................................17
Closed caption function (some models) .........................................................................18
Using Closed Captions ................................................................................................18
Operating the Caption and Text ...................................................................................19
Product Dimension............................................................................................................19
Antenna Connections .......................................................................................................20
Connection of external equipment (some models) ................................................21 ~ 22
Connecting DVD player (some models) ..........................................................................23
Troubleshooting check list................................................................................Back cover
3
Description of controls
POWER
MUTE
APC
TV/VIDEO
1
11
2
3
4
MEN
12
CAP
U
TION
13
CH
5
VOL
VOL
ENTER
CH
6
7
8
9
FCR
EYE/
SLE
AUTOPRG.
EP
MEMORY
/ERASE
REVIEW WIDE/ZOOM PICTURE
14
15
16
10
EYE/
REVIEW
AUTOPRG.
MTS
MEMORY
/ERASE
PICTURE
17
1. POWER BUTTON (or ON/OFF,
)
Refer to "Turning on/off the TV".
2. NUMBER BUTTONS
To select the desired channel directly.
3. APC (Auto Picture Control) BUTTON
To adjust the factory preset pictures
corresponding to the lighting around.
4. MENU BUTTON
To display on screen menus.
5. CH(or PR) UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
ENTER (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote control
only).
6. FCR (Favorite Channel Review) BUTTON
To select the favorite channel.
Refer to "Favorite channel memory".
7. AUTO PRG. (Auto program) BUTTON
To memorize channels by AUTO PROGRAM.
8. EYE/ BUTTON (some models)
To switch on or off eye picture.
Refer to "Enjoying the Eye Function".
: No function.
9. REVIEW BUTTON (some models)
To return to the previous channel.
10. WIDE/ZOOM/ BUTTON (some models)
To select the desired picture format (4:3, 16:9 or
ZOOM).
: No function.
11. MUTE BUTTON
To mute the sound. Again to restore the muted
sound.
12. TV/VIDEO BUTTON
To select TV, VIDEO or COMPONENT mode.
13. CAPTION BUTTON (some models)
To select the CAPTION mode.
Refer to "Closed caption function".
4
This is a simplified representation of front panel.
ON/OFF
1
18
19
1
18
19
12 4
5
ON/OFF
12 4
5
14. SLEEP BUTTON
To set the desired sleep time.
15. MEMORY/ERASE BUTTON (some models)
To memorize or erase the desired channel.
16. PICTURE BUTTON
To display picture modes one by one.
17. MTS BUTTON (some models)
To listen to the MTS sound.
Note: Fitting Batteries in the Remote Control Unit
• Open the battery compartment cover on the back
side and insert the batteries with correct polarity.
• Apply two 1.5V batteries of AAA type. Don’t mix the
used batteries with new batteries.
18. STAND BY INDICATOR (STAND BY or r)
Illuminates red when the TV is in standby mode.
Refer to "Turning on/off the TV".
19. REMOTE CONTROL SENSOR
5
Basic TV operation
Before operating your TV, make sure the following instructions have been completed.
• Your TV has been connected to an antenna or a cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an
example to help you with the TV operation.
Turning on/off the TV
Press the POWER (or ON/OFF) button on the set. At this time, the set
switches to standby mode and the standby indicator lights up in red.
To switch the TV on from standby mode, press the TV/VIDEO, CH
D /E button on the set or POWER, TV/VIDEO, CH D /E or number
button on the remote control.
A channel number will be displayed on the screen. The on-screen
display will disappear after a few seconds.
Press the POWER button on the remote control. It reverts to standby
mode.
To switch the TV off, press the POWER button on the set.
Selecting the on screen language
1. Press the MENU button and then D / E button until the menu is
displayed as shown right.
2. Press the G and then D /E button to select Language.
3. Press the G and then use D / E button to select the desired
language.
CH.
Language
Input
Key+lock
Caption+
Game
{
{
{
{
{
From this point on, the on-screen display will be presented in the
language of your choice.
Move++Next+{+Exit}
4. Repeatedly press the MENU button to exit.
6
Memorizing Channels
This is the function to memorize all the active channels in your area before you can use the TV.
There are two ways of memorizing channels. You can use either.
One is called AUTO PROGRAM and the other is called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional
channels you want to add or delete, you can manually add or delete those channels.
Memorizing the Channels by AUTO PROGRAM
AUTO PROGRAM searches and memorizes all the active channels in
your area then you can select the desired channel with the D / E
buttons.
Using the A.PROG button
++Auto+prog.
You can conveniently perform AUTO PROGRAM using the AUTOPRG.
button on the remote control.
1. Press the AUTOPRG. button.
2. Press the G or AUTOPRG. button.
The AUTO PROGRAM starts now.
OAutoOprog.
OToOOstart{
OOOOOOOOTVO19
O5%
If you want to stop auto programming, press the ENTER (A) button.
Only the channels searched up to that time are memorized.
StopÅ
Notes : • If the programmed signal has poor quality, memorize again
in the Auto prog..
• AUTO PROGRAM stores all receivable channels regardless
of receiving signal (RF, Cable).
• If channels of general wireless TV and cable TV are duplicated,
press the number buttons (0 ~ 9) to change as .
CH.
Channels of general wireless TV
Channels of Cable TV
Using the MENU button
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Auto prog..
3. Press the G button to enter the Auto prog. mode.
4. The AUTO PROGRAM starts now.
7
Auto+prog.
Manual
Favorite++
{
{
{
Move++Next { Exit}
+
+
Basic TV operation
Memorizing the Channels by MANUAL
PROGRAM
Using the MEMORY/ERASE button
You can conveniently perform MANUAL PROGRAM using the
MEMORY / ERASE button on the remote control.
1. Press the D / E or NUMBER buttons to select the channel number
you want to memorize or erase.
2. Press the MEMORY/ERASE button to select Memory or Erase.
The on screen display appears as shown right.
Using the MENU
++CATV+95+Memory
CH.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then use D / E button to select Manual.
3. Press the G button and then use D / E button to select Channel.
4. Press the G button and then use D / E button to select the channel
number you want to memorize or erase.
5. Press the F button and then use D / E button to select Memory.
6. Press the G button and then D / E to select On or Off.
7. Repeatedly press the MENU button to exit.
Auto+prog.
Manual
Manual
Favorite++
{
{
{
{
Move++Next { Back}
+
+
Channel
Memory
Memory
Fine
Selecting the Channel
Press the D / E button to conveniently select the upper or lower
channel then the channel being viewed, or NUMBER buttons to
directly select the desired channel.
To+set
{
{{
{
++On
++Off
Move++Next { Back}
+
+
Adjusting the Volume
Press the G button to increase the volume level or F button to
decrease the volume level.
To mute the sound, Press the MUTE button.
The word Mute is displayed.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE button again or VOL
F / G button.
oVolume
EEMute
8
15
+++++++
Various function
Setting the Clock
Before setting the on/off timer, first you should set the current time.
CH.
Clock
Clock
Off_timer
On+_timer
Auto+_off+
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Clock .
3. Press the G button and then press the D / E button to adjust the
hour.
4. Press the G button and then press the D / E button to adjust the
minute.
5. Repeatedly press the MENU button to exit.
{
{
{
{
{
__:__+AM
__
AM
Move++Next { Back}
+
+
Setting the Off Timer
This is the function to automatically switch the TV to standby mode at
a preset time.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Off timer.
3. Press the G button and then press the D / E button to adjust the
hour.
4. Press the G button and then press the D / E button to adjust the
minute.
5. On/Off is used to activate or deactivate preset on/off times.
Press the G and then D / E button to select Off or On.
6. Repeatedly press the MENU button to exit.
CH.
Clock
Off_timer
Off_timer
On+_timer
Auto+_off+
{
{
{
{
{
__:40+AM
11
PM
0Off
Move++Next { Back}
+
+
Note: If the same time is set for the on time and off time, only the off
time operates.
Setting the On Timer
This is the function to automatically turn the TV on at a preset time and
channel.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select On timer.
3. Press the G and then use D / E button to adjust the hour.
4. Press the G and then use D / E button to adjust the minute.
5. Press the G and then use D / E button to select the desired channel
among the memorized channels in auto program.
6. Press the G and then use D / E button to adjust the desired volume
level.
7. On/Off is used to activate or deactivate preset on/off times.
Press the G button and then use D / E button to select Off or On.
8. Repeatedly press the MENU button to exit.
Notes: •If you don’t press any button within 2 hours after turning on the
TV set by ON TIMER function, the set will be automatically
switched back to standby mode.
•TV must be in standby mode for the On timer to work.
9
CH.
Clock
Off_timer
On+_timer
On_timer
Auto+_off+
{
{
{
{
{
Move++Next { Back}
+
+
11
__:40+AM
PM
TV0000006
Vol.00030
Off
Various function
Setting the Sleep Time
You don't have to remember to switch the TV to standby mode before
you go to sleep. The sleep timer automatically turns the TV off after
the preset time elapses.
Press the SLEEP button to select the desired sleep time.
Each time you press this button, the sleep time is displayed one by
one as shown below. The timer begins to count down from the number
of minutes selected.
--- → 10 → 20 → 30 → 60 → 90 → 120 → 180 → 240
+Sleep
++_ _ _
Notes: •After a few seconds, the desired sleep time will disappear and
be operated automatically.
• To view the remaining sleep time, press the SLEEP button
once and the remaining sleep time will be displayed.
• To cancel the sleep time, select the Sleep --- mode by using
the SLEEP button.
Auto Off
If there is no input signal, the TV is switched to standby mode
automatically in 10 minutes.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Auto off.
3. Press the G and then D / E button to select On or Off.
4. Repeatedly press the MENU button to exit.
10
CH.
Clock
Off_timer
On+_timer
Auto+
_off+
Auto+
_off+
_
{
{
{
{
{
Move++Next { Back}
+
+
On
Off
Game (some models)
You can enjoy the TV game with this set.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Game.
3. Press the G button to enter the game mode.
4. Press the D /E button to select the desired game.
5. Press the ENTER (A) button to repeatedly start a game.
6. Repeatedly press the MENU button to exit game mode.
If you want to return the game list, press the D /E button.
For further information, refer to the game manual.
CH.
Language
Input
Key+lock
Caption+
Game
Game
{
{
{
{
{
To+start
Move++Next { Back}
+
+
Key Lock
The TV can be set so that the remote control is needed to control it.
This feature can be used to prevent unauthorized viewing.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Key lock.
3. Press the G button and then D / E button to select On or Off.
4. Repeatedly press the MENU button to exit.
Notes : • With the key lock on, the display Key lock appears on the
screen if any button on the front panel is pressed while
viewing the TV.
• This programmed to remember which option it was last set to
even if you switch the TV from standby mode.
11
CH.
Language
Input
Key+lock
Key+lock
Caption+
Game
{
{
{
{
{
Move++Next+{+Back}
On
Off
Various function
Favorite channel memory
Favorite channel memory is a convenient feature that lets you quickly
scan up to five channels of your choice without having to wait for the
TV to scan through all the in-between channels.
CH.
Auto+prog.
Manual
Favorite++
Favorite
+
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Favorite.
3. Press the G button and then use D / E button to select a favorite
channel position.
4. Use the F / G button to select the desired channel number.
5. Repeat steps 3 to 4.
6. Repeatedly press the MENU button to exit.
{
{
+{
{
CATV++95
_____
_____
_____
_____
_____
_____
_____
Move++Next { Back}
+
+
To select the favorite channel, repeatedly press the FCR (Favorite
Channel Review) button. Eight channels programmed appear on the
screen one by one.
Adjusting the Fine
This function is to adjust the picture to stable condition when it is poor,
for example, a horizontal stripe, twisted picture or no color in broadcasting.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Manual..
3. Press the G and then D / E button to select Fine.
4. Press the G button to enter the Fine mode.
5. Press the F / G button to tune the desired picture condition.
6. Press the ENTER (A) button to memorize.
7. Repeatedly press the MENU button to exit.
Notes : • To release the memorized fine tuning, program again the finetuned channel by AUTO PROGRAM or MANUAL PROGRAM.
• If the finely tuned channel is memorized, the color of the
channel number changes to yellow.
12
CH.
Auto+prog.
Manual
Favorite++
{
{
{
Move++Next { Exit}
+
+
Channel
Memory
+Fine
Fine
{
{
{{
Move++Next { Back}
+
+
0
Picture control
Enjoying the Eye Function (some models)
The set will automatically adjust the picture according to the
surrounding conditions with the display Magic eye.
++
Magic+eye
Contrast
Brightness
Color
Sharpness
Stop:EYE
1. Press the EYE button on the remote control.
The display Magic eye appears and the picture is adjusted.
2. Press the EYE button again to switch the Eye function off.
100
60
50
60
Magic+eye+off
Auto Picture Control
You can select picture modes programmed at factory as you prefer.
Using the APC button
1. Press the APC button.
2. Press the APC button to select Magic eye(some models), Clear,
Optimum, Soft or User.
3. Press the ENTER(A) button to exit.
++APC
+Clear
Using the MENU button
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select APC.
3. Press the G button to enter the APC mode.
4. Press the D / E button to select Magic eye(some models),
Clear, Optimum, Soft or User.
5. Repeatedly press the MENU button to exit.
13
CH.
APC
++{
APC
XD
{
Contrast
{
Brightness
+{
Color ++++++++{
Sharpness
+{
+{
Tint
+
++++++
Move++Next { Back}
+
+
Magic+eye
Clear
Optimum
Soft
User
Picture control
Adjusting the Picture
CH.
This is the function to manually adjust the desired picture levels
(Contrast, Brightness, Color, Sharpness, Tint) of the screen as
you like. If the picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system PAL-M/N, the
picture item Tint is not displayed.
APC
++{
XD
{
Contrast
{
+{
Brightness
Color ++++++++{
Sharpness
+{
Tint
+{
++++++
Move++Next { Back}
+
CH.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select the desired picture
mode.
3. Press the G button.
4. Press the F / G button to adjust the level.
The level of displayed is adjusted.
5. Repeatedly press the MENU button to exit.
+
APC
++{
XD
{
+Contrast
Contrast
{
Brightness
+{
Color ++++++++{
Sharpness
+{
+{
Tint
100
++++++
Move++Next { Back}
+
+
XD (some models)
XD is LG Electronic’s unique picture improving technology to display a
real HD source through an advanced digital signal processing
algorithm.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select XD.
3. Press the G button and then D / E button to select On or Off.
4. Press the MENU button to exit.
Note : When selecting APC options, XD is automatically change to Off.
14
CH.
APC
++{
XD
{
XD
Contrast
{
Brightness
+{
Color ++++++++{
Sharpness
+{
+{
Tint
+
++++++
Move++Next { Back}
+
+
On
Off
Sound control
Enjoying the Stereo/SAP Broadcast
(some models)
This TV set can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo program, as
the system to be transmitted one additional sound signal as well as the
original one. MTS function doesn't operate in the video mode.
Using the MTS Button
1. Press the MTS button to select your desired MTS mode.
Each time you press this button, the MONO, STEREO or SAP mode
appears in turn.
2. Press the ENTER (A) button to exit.
Notes:
• Stereo or SAP can only be received if the TV station transmits those
signals, even though you have selected STEREO or SAP.
• Mono sound is automatically received if the broadcast is only in
Mono; even though STEREO or SAP has been selected.
• Select MONO if you want to listen to mono sound in remote fringe
areas during stereo/SAP broadcasting.
Auto Sound Control
You can enjoy the best sound without any special adjustment because
this TV set automatically adjusts the sound appropriate to viewing
program character by self-intelligence.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then the D / E button to select DASP.
3. Press the G and then the D / E button to select Flat, Music,
Movie, Sports or User.
4. Repeatedly press the MENU button to exit.
15
CH.
DASP
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
X-WAVE
++++{{
{
{
{
{
{
{
Move++Next { Back}
+
+
Flat
Music
\ Movie
Sports
User
Sound control
Turbo Sound (some models)
With this function sound will be more emphasized and amplified
than normal sound. You can enjoy the Turbo sound so much better
than normal sound.
CH.
DASP
Turbo
Turbo+Sound
+Snd.
AVL
Balance
Treble
Bass
X-WAVE
Using the MENU Button
1. Press the MENU button and then use D / E button to select the
Sound menu.
2. Press the G and then D / E button to select Turbo Snd..
3. Press the G and then D / E button to select On or Off.
4. Press the MENU button to exit.
++{
{{
{
{
{
{
{
On
\ Off
Move++Next { Back}
+
+
X-wave (Wireless Sound) (some models)
Sound
You can also listen to the sound through the FM receiver.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select X-WAVE.
3. Press the G and then D / E button to select Set Freq..
4. Press the G button to tune in a frequency on the X-wave menu.
5. Use the number 0 to 9 or press the F / G button to match the TV’s
frequency and the FM receiver’s.
CH.
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
X-WAVE
++{
{
{
{
{
{
{
\
Set+Freq.+{
Set+Frequency+{
Off
Move++Next { Back}
+
Note:
+
OX-WAVE
88MHz
107MHz
1. If the reception is poor or weak, select a different frequency.
O
FM95.0MHz
2. For best results, there should be no more that 5m(16.4ft) between
the TV and FM Receiver.
3. In certain areas, the FM transmitter ability may be weak, such as
near a broadcast tower.
4. The reception sensitivity may depend on the kinds of receiver (FM
radio).
16
Adjust}{+0-9+BackÅ
AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level even if you change
channels.
CH.
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
X-WAVE
Using the MENU Button
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select AVL.
3. Press the G and then D / E button to select On or Off.
4. Repeatedly press the MENU button to exit.
++{
{
{
{
{
{
{
On
\Off
Move++Next { Back}
+
+
Adjusting the balance (some models)
CH.
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
X-WAVE
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Balance.
3. Press the G and then F / G button to adjust the balance level.
4. Repeatedly press the MENU button to exit.
++{
{
{
{
{
{
{
\50
0
Move++Next { Back}
+
+
Adjusting the treble (some models)
CH.
DASP
Turbo+Snd.
AVL
Balance
Treble
Treble
Bass
X-WAVE
This function is to increase or decrease treble.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Treble.
3. Press the G button to enter the Treble mode.
4. Press the F / G button to adjust the treble level.
5. Repeatedly press the MENU button to exit.
Adjusting the bass (some models)
This function is to increase or decrease bass.
1. Press the MENU button and then D / E button the until the menu is
displayed as shown right.
2. Press the G and then D / E button to select Bass.
3. Press the G button to enter the Bass mode.
4. Press the F / G button to adjust the bass level.
5. Repeatedly press the MENU button to exit.
17
++{
{
{
{
{{
{
{
\
50
0
Move++Next { Back}
+
+
CH.
DASP
Turbo+Snd.
AVL
Balance
Treble
Bass
Bass
X-WAVE
++{
{
{
{
{
{{
{
Move++Next { Back}
+
+
\
0
50
Closed caption function (some models)
Closed captioning is a process which converts the audio portion of a television program into written
words, which then appear on the television screen in a form similar to subtitles. Closed captions allow
viewers to read the dialogue and narration of television programs.
Using Closed Captions
FOLLOW ME
Captions are the subtitles of the dialogue and narration of television
programs. For prerecorded programs, program dialogue can be
arranged into captions in advance. It's possible to caption a live
program by using a process called “real-time captioning”, which
creates captions instantly. Real-time captioning is normally done by
professional reporters using a machine shorthand system and
computer for translation into English.
Captioning is an effective system for the hearing-impaired, and it can
also aid in teaching language skills.
• The picture at left shows a typical caption.
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast two different caption signals on the same channel. By selecting
MODE 1 or MODE 2, you can choose which signal you view. MODE 1 is usually the signal with the
captions, while MODE 2 might show demonstration or programming information.
• Your TV might not receive caption signals normally in the following situations.
1 Poor reception conditions are encountered:
A
IGNITION:
Picture may flutter, drift, suffer from black spots or horizontal
streaking. Usually caused by interference from automobile ignition
systems, neon lamps, electrical drills and other electrical
appliances.
A
GHOSTS:
Ghosts are caused when the TV signal splits and follows two paths.
One is the direct path and the other is reflected off tall buildings,
hills or other objects. Changing the direction or position of the
antenna may improve reception.
A
SNOW:
If your receiver is located at the weak, fringe area of a TV signal,
your picture may be marred by small dots. It may be necessary to
install a special antenna to improve the picture.
2 An old, bad or illegally recorded tape is played.
3 Strong, random signals from a car or airplane interfere with the TV signal.
4 The signal from the antenna is weak.
5 The program wasn't captioned when it was produced, transmitted or taped.
18
Closed caption function
Using the Text Function
Text services give a wide variety of information on all kind of subjects
(ex. captioned program lists, weather forecasts, stock exchange
topics, news for hearing-impaired---) through the full TV screen.
But not all stations offer text services, even though they might offer
captioning.
Note: In the event you receive a poor signal, an empty black box may
appear and disappear, even when the text mode is selected.
This is normal function in such an event.
Operating the Caption and Text
Using the CAPTION button
1. Press the CAPTION button.
2. Press the CAPTION button to select OFF, Mode 1, Mode 2, Text 1
or Text 2.
3. Press the ENTER (A) button to exit.
+Caption +Mode1
Using the MENU button
1. Press the MENU button and then use D / E button to select the
Special menu.
2. Press the G and then D / E button to select Caption.
3. Press the G button and then use D / E button to select Off,
Mode 1, Mode 2, Text 1 or Text 2.
4. Repeatedly press the MENU button to exit.
Note: This TV is programmed to remember which mode it was last set
to, even if you turn the TV off.
CH.
Language
Input
Key+lock
Caption+
Caption+
Game
{
{
{
{ +++Off
{ +++Mode1
+++Mode1
+++Text1
+++Text2
Move++Next+{+Back}
Product Dimension
Models
Viewing Size (mm)
Width (mm)
Depth(mm)
Height (mm)
21FS4RK-LS
510
600
396
457
21FS6RL-LS
510
600
326
457
19
Antenna Connections
Combination
VHF/UHF Antennas
300 ohm Flat Wire
300 ohm
Flat Wire
TV rear
75 ohm
Antenna
Jack
300 to 75
ohm Adapter
75 ohm
Coaxial
Cable
300 to 75
ohm Adapter
75 ohm
CATV Cable
Connecting an Outdoor Antenna
For the best reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality. Before connecting it,
necessarily inspect them. Any service center can explain the various outdoor antennas available to you.
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to screws on the
300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
into 75 ohm antenna jack.
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to
the 75 ohm antenna jack.
Connecting a CATV Cable
If you subscribe to a CATV system, change the antenna connection as described below.
2.
1.
75 ohm
Antenna Jack
300 to 75 ohm
Adapter
75 ohm CATV Cable
from cable TV source
1. Remove the 300 to 75 ohm adapter or the cable from the set if attached.
2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack.
20
Connection of external equipment (some models)
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Here shown may be somewhat different from your set.
These are an example drawing of typical jack layout.
PB
PR
COMPONENT
L/MONO
VIDEO
AUDIO
2
R
AUDIO
R
IN
AUDIO
L
(L/MONO) AUDIO(R)
VIDEO
OUT
AV VIDEO
1
L/MONO
DVD INPUT (480i)
3
S-VIDEO
AV IN2
Y
S-VIDEO
JACK
(some
models)
2
R
S-VIDEO
VIDEO
S-VIDEO
JACK
(some models)
L/MONO
AUDIO
4
R
4
AV IN2
AV IN2
AV IN2
4
2
AV IN2
VIDEO
L/MONO
EARPHONE S-VIDEO
AUDIO
VIDEO L/MONO AUDIO R
R
S-VIDEO
JACK
(some models)
4
2
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select VIDEO1 or VIDEO.
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select VIDEO2 or S-VIDEO.
3. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitoring the selected program.
4. §/ EARPHONE JACK (some models) : In some models, this jack is located on the front or side of TV.
Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
VIDEO
Connecting AUDIO/VIDEO IN Jacks
OUT
AV VIDEO
L/MONO
1. Connect the audio/video output jacks of the VCR to
IN 1(A/V) jacks on the side or back of TV.
If you connect the audio jack only, you can't hear the
sound from the TV.
(L/MONO) AUDIO(R)
AUDIO
IN
R
< TV >
2. Press the TV/VIDEO button to select VIDEO1.
Note: In some stereo models, if you connect the
audio/video output jacks of the VCR to the IN 2
(A/V) jacks on the front or side of TV, select
VIDEO2.
< TV >
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
< Playback VCR >
Note: In case of MONO VCR, connect the output jack of VCR to the AUDIO L/MONO IN jack of TV so
that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack of TV
the sound is heard only from right speaker.
21
Note: In some mono models, when the input jacks on the front panel and back panel are connected to
external equipments at the same time, the input jacks on the front panel have priority over the
input jacks on the back panel of the TV.
S-VIDEO
Connecting the S-VHS VCR
(some models)
VIDEO
L/MONO
1. Connect the S-VHS output jack of the VCR to the
S-VIDEO jack on the side or back of TV.
2. Connect the audio/video output jacks of the VCR
to the IN 2(A/V) jacks on the front or side of TV.
3. Press the TV/VIDEO button to select S-VIDEO.
4. Press the PLAY button on the VCR.
The video playback is visible on the TV screen.
AUDIO
R
< TV >
< Playback VCR >
VCR Recording
(some models)
1. Connect the audio/video input jacks of the
recording VCR to the OUT (A/V) jacks on the
back.
2. Select the program number on the TV.
3. Set the recording VCR to record.
< Recording VCR >
OUT
AV VIDEO
(L/MONO) AUDIO(R)
IN
< TV >
Recording a program from connecked other equipment
< Recording VCR >
(some models)
1. Connect the output jacks of the playback VCR
to the IN 1(A/V) jacks on the side or back of
TV.
2. Connect the input jacks of the recording VCR
to the OUT (A/V) jacks on the back of TV.
3. Press the TV/VIDEO button to select VIDEO1.
OUT
< TV >
If you connect it to the IN 2 (A/V) jacks on the
side of TV, you should select VIDEO2.
AV VIDEO
IN
4. Press the PLAY button on the playback VCR
and set the recording VCR to record.
< Playback VCR >
22
(L/MONO) AUDIO(R)
Connecting DVD player (some models)
• Connect component DVD inputs to Y, PB, PR(480i) and audio IN to audio(L/R) ports.
• Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
1.How to connect
< TV connection panel >
Y
PB
PR
COMPONENT
DVD INPUT (480i)
OUT
AV VIDEO
L
(L/MONO) AUDIO(R)
IN
Y
AUDIO
R
PB
(R) AUDIO (L)
PR
< Back panel of DVD >
Note:
TV INPUT
Y
DV D OUTPUT
Y
Y
Y
Y
PB
PR
Cb Cr
B -Y R -Y
Pb Pr
PB PR
2.How to use
• Turn the set on and press the TV/VIDEO button on the remote control or
TV/VIDEO button on the front panel to select COMPONENT.
•Try this after turning on the DVD set.
23
Troubleshooting check list
SYMPTOMS
No power
No picture or sound
Poor picture but good sound
Poor reception
Lines in picture
Ghosts (multiple images)
Remote control does not work.
Cannot tune desired channel.
CHECK THESE THINGS
Is power cord plugged in?
Is television turned on?
Check batteries in remote control.
Try another channel (station trouble).
Check antenna connectings.
Check for local interference.
Adjust the antenna.
Adjust the picture control.
Program channel using AUTO
PROGRAM.
Download PDF