LG | 32LD310 | LG 22LD310 Owner’s Manual

Owner’s Manual Specification
Yook jisun
10.02.23
1. Model Description
MODEL
SUFFIX
2.
BRAND
LD310-MA
Latin America
담 당
Product Name
관 리 자
KANG
KWANG SUK
10.02.23
LG
22 LD310-MA, 26 LD310-MA,
32 LD310-MA
Part No.
MFL41469222
(1006-REV01)
Printing Specification
1. Trim Size (Format) : 182mm x 257 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Coated paper , S/White 150 g/㎡
• Inside : Uncoated paper , Wood-Free Paper (백상지) 60 g/㎡
4. Printing Method : Off set
5. Bindery : Perfect bind
6. Language : English (1)
7. Number of pages : 60
N
O
T
E
S
3.
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Special Instructions
(1) Origin Notification
* LGERS : Printed in Mexico
* LGEAZ : Printed in Brazil
* LGESP : Printed in Brazil
* LGESY : Printed in China
4.
* LGEND : Printed in China
* LGEIL : Printed in India
* LGEIN : Printed in Indonesia
* LGETH : Printed in Thailand
* LGEVN : Printed in Vietnam * LGEMA : Printed in Poland
* LGEEG : Printed in Egypt
* LGEWR : Printed in Poland
* LGERA : Printed in Russia
* LGEAK : Printed in Kazakhstan
Changes
9
8
7
6
5
4
3
2
1
REV.
NO.
06/10/10
MM/DD/YY
Yook J.S
S0-87436
SIGNATURE
CHANGE NO.
Changed the bolts for stand assembly's length.
CHANGE
CONTENTS
P/NO. MFL41469222
Total pages : 60 pages
Pagination sheet
Rear cover
Front cover
LG(EN)
P/NO.
LG(EN)
2
….
….
…
58
59
OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
22LD310
26LD310
32LD310
P/NO : MFL41469222 (1006-REV01)
www.lg.com
MFL41469218-en 4/29/10 2:15 PM Page 2
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
MFL41469218-en 4/29/10 2:15 PM Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
1
2
5
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
6
Only use attachments/accessories specified by
the manufacturer.
7
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
8
Unplug this apparatus during lighting storms
or when unused for long periods of time.
9
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Do not use this apparatus near water.
Clean only with dry cloth.
3
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
4
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
3
MFL41469218-en 4/29/10 2:15 PM Page 4
SAFETY INSTRUCTIONS
4
10
Never touch this apparatus or antenna during
a thunder or lighting storm.
11
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
12
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
13
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
14
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.
15
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
16
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
Short-circuit
Breaker
17
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
18
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
MFL41469218-en 4/29/10 2:15 PM Page 5
19
20
21
Cleaning
When cleaning, unplug the power cord and rub
gently with a soft cloth to prevent scratching.
Do not spray water or other liquids directly on
the TV as electric shock may occur. Do not
clean with chemicals such as alcohol, thinners
or benzene.
Moving
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
22
Take care not to touch the ventilation openings. When watching the TV for a long period,
the ventilation openings may become hot.
23
If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the power
cord contact an authorized service center.
24
No presione en exceso el panel con sus manos u
objetos afilados, como tornillos, lápices o bolígrafos, y evite rayarlo.
25
Keep the product away from direct sunlight.
26
For LCD TV
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out in
accordance to the regulations of your local authority.
5
MFL41469218-en 4/29/10 2:15 PM Page 6
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Stand Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Positioning your Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Kensington Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Securing the TV to the wall to prevent falling when
the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
External Stereo Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Turning On the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Channel Search
- Auto Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
- Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6
Fine Tuning Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Favorite Channels Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 35
Preset Picture Settings (Picture Mode Preset) . . . 36
Manual Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 38
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Screen Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SOUND & LANGUAGE CONTROL
Preset Sound Settings - Sound Mode . . . . . . . . . . . . . . . 43
Sound Setting Adjustment - User Mode . . . . . . . . . . . 44
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 46
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 48
On-Screen Menus Language Selection . . . . . . . . . . . . . 49
Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
MFL41469218-en 4/29/10 2:15 PM Page 7
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7
MFL41469218-en 4/29/10 2:15 PM Page 8
FEATURE OF THIS TV
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."
LG TV include a unique invisible speaker system,
tuned by renowned audio expert, Mr. Mark Levinson.
Speakers are embedded in strategic spots behind the
front cabinet and use minute vibrations to turn the
entire front bezel into the speaker system. The result
is a clean, polished look, and enhanced audio by
increasing the “sweet spot”, giving a wider and richer
sound field.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN
■
■
■
8
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV
for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma).
Image burn can also occur on the letterboxed
areas of your TV if you use the 4:3 aspect ratio
setting for an extended period.
MFL41469218-en 4/29/10 2:15 PM Page 9
PREPARATION
ACCESSORIES
OG
ME
MO
RY/ER
ASE
1
4
2
7
5
E
6
0
9
TV
PO
M
TS
CH
VO
L
IN
PU
T
CA
PT
ION
3
8
MUT
W
FA
V
PR
TE
R
4
Q.V
IE
W
0
CH
VO
L
IN
PU
T
CA
3
8
E
IO
N
5
MUT
RAT
IO
PT
2
7
SL
EE
P
SO
UN
D
OG
ME
MO
RY/ER
ASE
1
VO
L
CH
ER
A.
EN
M
EN
U
6
9
FA
V
EN
TE
R
M
EN
U
VO
L
CH
Q.V
IE
W
PI
CTU
RE
SL
EE
P
SO
UN
D
1.5V 1.5V
RAT
IO
Owner’s Manual
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
The accessories included may differ from the images below.
Remote Control
Power Cord
Batteries
(Some models)
Not included with all models
RF Adapter (Some models)
You must connect it to the antenna
wire after fixing in Antenna Input.
This adapter is For supplied in
A r g e n t i n a.
* Wipe spots on the exterior only with
the polishing cloth.
Polishing Cloth
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
For 22LD310
Cable Management Clip Protection Cover
Only 26/32LD310
x4
(M4x24)
Bolts for stand assembly
Screw for stand fixing
Protection Cover
9
MFL41469218-en 4/29/10 2:15 PM Page 10
PREPARATION
FRONT PANEL INFORMATION
■
Image shown may differ from your TV.
PREPARATION
22/26LD310
MENU Button
INPUT Button
POWER Button
ENTER
Button
INPUT MENU ENTER
VOLUME
CHANNEL
(-, +) Buttons (E,D) Buttons
VOL
CH
32LD310
CH
CHANNEL (D,E)
Buttons
VOL
VOLUME (+, -)
Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
SPEAKER
Remote Control Sensor,
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
(Can be adjusted P o w e r I n d i c a t o r in the
OPTION menu. G p . 5 0)
10
POWER Button
MFL41469218-en 4/29/10 2:15 PM Page 11
BACK PANEL INFORMATION
■
Image shown may differ from your TV.
PREPARATION
1
4
3
2
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
AUDIO
COMPONENT IN
VIDEO
ANTENNA
IN
SERVICE ONLY
5
1
2
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
This TV does not support DVI(VIDEO) signal
using DVI to HDMI cable.
3
Audio Output
Connect an external amplifier, or add a subwoofer
to your surround sound system.
4
Audio/Video Input (AV IN)
Connect audio/video output from an external
device to these jacks.
6
7
5
SERVICE ONLY PORT
6
Component Input
Connect a component video/audio device to
these jacks.
7
Antenna Input
Connect RF antenna to this jack.
11
MFL41469218-en 4/29/10 2:15 PM Page 12
PREPARATION
STAND INSTRUCTIONS (For 22LD310)
■
Image shown may differ from your TV.
INSTALLATION
PREPARATION
1
2
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
DETACHMENT
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Loose the bolts from TV.
3
Detach the stand from TV.
Assemble the TV as shown until you hear it click.
PROTECTION COVER
4
Insert the P R O T E C T I O N C O V E R into the TV.
PROTECTION COVER
5
12
Fix the 4 bolts securely using the holes in the
back of the TV.
MFL41469218-en 4/29/10 2:15 PM Page 13
STAND INSTRUCTIONS (For 26/32LD310)
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
DETACHMENT
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Loose the bolts from TV.
3
Detach the stand from TV.
PREPARATION
INSTALLATION
Fix the 4 bolts securely using the holes in the
back of the TV.
3
PROTECTION COVER
! NOTE
G
After removing the stand, install the included
p r o t e c t i o n c o v e r over the hole for the stand.
Press the P R O T E C T I O N C O V E R into the TV
until you hear it click.
When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installation). Do not over tighten.
13
MFL41469218-en 4/29/10 2:15 PM Page 14
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
A
Model
B
22LD310
100 * 100
Standard Screw
Quantity
M4
4
Wall Mounting Bracket
(sold separately)
RW120
26LD310
200 * 100
M4
RW230
4
32LD310
RW230
AW-47LG30M
! NOTE
G
G
G
G
G
Screw length needed depends on the wall mount
used. For further information, refer to the instructions included with the mount.
Standard dimensions for wall mount kits are shown
in the table.
When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
Do not use screws longer then the standard dimension, as they may cause damage to the inside to
the TV.
For wall mounts that do not comply with the VESA
CAUTION
14
G
G
G
standard screw specifications, the length of the
screws may differ depending on their specifications.
Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.
LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installation instructions.
Do not install your wall mount kit while your TV is turned on. It may result in personal
injury due to electric shock.
MFL41469218-en 4/29/10 2:15 PM Page 15
CABLE MANAGEMENT
■
Image shown may differ from your TV.
For 22LD310
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
2
Install the CABLE MANAGEMENT CLIP as
shown.
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
2
Install the CABLE MANAGEMENT CLIP as
shown.
PREPARATION
1
For 26/32LD310
CABLE MANAGEMENT CLIP
3
CABLE MANAGEMENT CLIP
Fit the CABLE MANAGEMENT CLIP as
shown.
3
Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
How to remove the CABLE
MANAGEMENT CLIP
G
Hold the CABLE MANAGEMENT CLIP with
both hands and pull it
backward.
! NOTE
G
Do not hold the CABLE MANAGEMENT
CLIP when moving the TV.
- If the TV is dropped, you may be injured or
the product may be broken.
15
MFL41469218-en 4/29/10 2:15 PM Page 16
PREPARATION
DESKTOP PEDESTAL INSTALLATION
■
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
PREPARATION
4 inches
4 inches
4 inches
4 inches
G
CAUTION
G
Ensure adequate ventilation by following the clearance recommendations.
Do not mount near or above any type of heat source.
SWIVEL STAND (Except 22LD310)
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
POSITIONING YOUR DISPLAY (For 22LD310)
■
■
Here shown may be somewhat different from your TV.
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
12
16
0
0
3
MFL41469218-en 4/29/10 2:15 PM Page 17
ATTACHING THE TV TO A DESK (Except 22LD310)
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.
PREPARATION
Stand
1-Screw
(provided as parts of the product)
Desk
WARNING
G
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
KENSINGTON SECURITY SYSTEM
■
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on
the back panel. Connect the Kensington Security System cable as
shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m,
the internet homepage of the Kensington company. Kensington sells
security systems for expensive electronic equipment such as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
17
MFL41469218-en 4/29/10 2:15 PM Page 18
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
■
PREPARATION
■
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
18
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
MFL41469218-en 4/29/10 2:15 PM Page 19
■
■
To prevent damage do not connect to the power outlet until all connections are made between the devices.
Image shown may differ from your TV.
ANTENNA OR CABLE CONNECTION
Wall Antenna Socket or Outdoor Antenna without a Cable Box
AUDIO OUT
Connections.
For optimum picture quality, adjust antenna direction if needed.
PREPARATION
1. Antenna (Analog)
AV IN
AUDIO
IN
Outdoor
Antenna
(VHF, UHF)
COMPONENT IN
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
AUDIO OUT
Copper Wire
Be careful not to bend the copper wire
AV IN
when
connecting the antenna.
AUDIO
IN
COMPONENT IN
2. Cable
ANTENNA
IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■
19
MFL41469218-en 4/29/10 2:15 PM Page 20
EXTERNAL EQUIPMENT SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
HD RECEIVER SETUP
Component Connection
1. How to connect
AUDIO OUT
2
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O jacks on
the TV. Match the jack colors (Y = green, PB = blue, and
PR = red).
AUDIO
R
IN
VIDEO
AUDIO
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
1
ANTENNA
IN
SERVICE ONLY
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
1
2
2. How to use
■
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box operation.)
Select the C o m p o n e n t input source on the TV using the
I N P U T button on the remote control.
Y, CB/PB, CR/PR
Supported Resolutions
20
AV IN
VIDEO L(MONO)
Signal
Component
HDMI
480i
Yes
No
480p
Yes
Yes
720p
Yes
Yes
1080i
No
No
1080p
No
No
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480i
15.73
15.75
59.94
60.00
720x576i
15.625
50.00
720x480p
31.47
31.50
59.94
60.00
720x576p
31.25
50.00
1280x720p
44.96
45.00
37.50
59.94
60.00
50.00
MFL41469218-en 4/29/10 2:15 PM Page 21
COMPONENT IN
HDMI Connection
1. How to connect
2
No separate audio connection is necessary.
HDMI supports both audio and video.
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
VIDEO
AUDIO
SERVICE ONLY
2. How to use
1
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
■ Select the H D M I input source on the TV using the I N P U T
button on the remote control.
■
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to the H D M I I N
jack on the TV.
COMPONENT IN
1
! NOTE
If the DVD player supports Auto HDMI function, the output resolution of the source device will be automatically TV to 1280*720p.
G If the DVD player does not support Auto HDMI, you must TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280*720p.
GWe recommend less than 10m for HDMI cable.
G HDMI Audio Supported Format: PCM
GIf the Auto setting is set to Dolby/DTS/Bitstream in some DVDP/STB, make sure to change the setting to
PCM.
GIf the resolution of external equipment is over 1280*720p, there will be no picture on the TV.
G
HDMI-DTV
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x480p
31.47
31.5
59.94
60.00
720x576p
31.25
50.00
44.96
45
37.5
59.94
60.00
50.00
1280x720p
21
MFL41469218-en 4/29/10 2:15 PM Page 22
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Component Connection
1. How to connect
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the TV. Match
the jack colors (Y = green, PB = blue, and PR = red).
AV IN
VIDEO L(MONO)
AUDIO
R
IN
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
VIDEO
AUDIO
SERVICE ONLY
2. How to use
■
■
■
Turn on the DVD player, insert a DVD.
Select the C o m p o n e n t input source on the TV using the
I N P U T button on the remote control.
Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the
component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
22
AUDIO OUT
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
1
2
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
1
ANTENNA
IN
MFL41469218-en 4/29/10 2:15 PM Page 23
COMPONENT IN
HDMI Connection
1. How to connect
Connect the HDMI output of the DVD to the H D M I
I N jack on the TV.
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
VIDEO
AUDIO
SERVICE ONLY
2. How to use
■
■
Select the HDMI input source on the TV using the I N P U T
button on the remote control.
Refer to the DVD player's manual for operating instructions.
1
COMPONENT IN
2
No separated audio connection is necessary.
HDMI supports both audio and video.
EXTERNAL EQUIPMENT SETUP
1
! NOTE
If the DVD player supports Auto HDMI function, the output resolution of the source device will be automatically TV to 1280*720p.
G If the DVD player does not support Auto HDMI, you must TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280*720p.
GWe recommend less than 10m for HDMI cable.
G HDMI Audio Supported Format: PCM
GIf the Auto setting is set to Dolby/DTS/Bitstream in some DVDP/STB, make sure to change the setting to
PCM.
GIf the resolution of external equipment is over 1280*720p, there will be no picture on the TV.
G
23
MFL41469218-en 4/29/10 2:15 PM Page 24
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Antenna Connection
1. How to connect
2
Connect the RF antenna out socket of the
VCR to the A N T E N N A I N socket on the
TV.
Connect the antenna cable to the RF
antenna in socket of the VCR.
DIO
R
IO
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
1
■
S-VIDEO
ANT IN
OUTPUT
SWITCH
L
VIDEO
R
ANTENNA
IN
Wall Jack
2. How to use
■
ANT OUT
1
2
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Antenna
Composite (RCA) Connection
1. How to connect
1
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red).
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
R
IN
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
■
Select the A V input source on the TV using the I N P U T
button on the remote control.
COMPONENT IN
2. How to use
AUDIO
VIDEO
ANTENNA
IN
CE ONLY
1
S-VIDEO VIDEO
L
R
ANT IN
! NOTE
G
24
If you have a mono VCR, connect the audio cable from
the VCR to the A U D I O L / M O N O jack of the TV.
OUTPUT
SWITCH
ANT OUT
MFL41469218-en 4/29/10 2:15 PM Page 25
OTHER A/V SOURCE SETUP
1. How to connect
1
AUDIO OUT
AV IN
VIDEO L(MONO)
AUDIO
VIDEO
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
■
R
SERVICE ONLY
1
2. How to use
■
AUDIO
IN
COMPONENT IN
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
Select the A V input source on the TV using the
I N P U T button on the remote control.
Operate the corresponding external equipment.
VIDEO
L
R
Video Game Set
Camcorder
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
AUDIO OUT
AV IN
VIDEO L(MONO)
Connect the input jack of the stereo amplifier to the
A U D I O O U T jacks on the TV.
IN
VIDEO
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
R
AUDIO
COMPONENT IN
1
AUDIO
SERVICE ONLY
1
! NOTE
G
This function works in following mode : TV, AV, Component, HDMI
25
MFL41469218-en 4/29/10 2:15 PM Page 26
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
MTS Selects the MTS sound: Mono, Stereo, or SAP. G p.48
A.PROG Searches for available channels. G p.30
(AUTO PROGRAM)
WATCHING TV / CHANNEL CONTROL
MEMORY/ERASE Memorizes or erases selected channel. G p.31
CAPTION Selects CAPTION mode. G p.51
CHANNEL Select available channels.
UP/DOWN
VOLUME UP Increase/decrease the sound level.
/DOWN
POWER
TV
MTS
A.PROG MEMORY/ERASE CAPTION
1
2
3
4
5
6
7
8
9
0
MUTE
VOL
ENTER
VOL
MENU Displays the main menu.
CH
Q.VIEW Tune to the last channel viewed.
SLEEP Select the amount of time before your TV turns off automatically. G p.54
PICTURE Selects the factory preset picture depend on the viewing
environment. G p.36
SOUND Selects the factory preset sound for type of program. G p . 4 3
RATIO Change the aspect ratio. G p.35
26
FAV
CH
THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference.
Right/ENTER)
INPUT
MENU
Q.VIEW
SLEEP
PICTURE SOUND
RATIO
MFL41469218-en 4/29/10 2:15 PM Page 27
POWER Turns your TV.
TV In AV, Component and HDMI input sources, screen returns to the last TV channel.
NUMBER button
MUTE Switch the sound on or off.
FAV Scroll through the programmed Favorite channels. G p.33
WATCHING TV / CHANNEL CONTROL
INPUT Select the desired input source.
Installing Batteries
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
■
Install two 1.5V AAA batteries. Don’t mix old or
used batteries with new ones.
■
Close cover.
27
MFL41469218-en 4/29/10 2:15 PM Page 28
WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
button on the TV or press the P O W E R button on the
remote control.
1
2
Select the viewing source by using the I N P U T button on the remote control.
■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
WATCHING TV / CHANNEL CONTROL
When finished using the TV, press the P O W E R button on the remote control. The TV reverts to standby
mode.
3
! NOTE
G
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
G
If you do not complete the I n i t i a l s e t t i n g, it will appear whenever the TV is switched on until the I n i t i a l
s e t t i n g procedure is completed.
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, A u t o T u n i n g.
Note:
It will automatically disappear after approx. 40 seconds unless a button is pressed.
CHANNEL SELECTION
1
Press the C H (D or E) or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
28
1
Press the V O L (F or G) button to adjust the volume.
2
If you want to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the MUTE or V O L (F or G)
button.
MFL41469218-en 4/29/10 2:15 PM Page 29
ON-SCREEN MENUS SELECTION
1
2
Press the M E N U button and then use D or E button to select the each menu.
Press the G button and then use D
E F G
button to display the available menus.
Picture
Audio
Auto Tuning
Manual Tuning
Favorite Channel
Aspect Ratio
Picture Mode
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
MENU
Setup MENU
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
DEF G
E
MENU
100
100
50
70
70
0
DEF G
Picture MENU
Option
Time
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
Clock
Off Time
On Time
Sleep Timer
DEF G
DEF G
MENU
Option MENU
MENU
Audio MENU
50
50
0
WATCHING TV / CHANNEL CONTROL
Setup
MENU
Time MENU
29
MFL41469218-en 4/29/10 2:15 PM Page 30
WATCHING TV / CHANNEL CONTROL
CHANNEL SEARCH
Auto Tuning: Program Search
WATCHING TV / CHANNEL CONTROL
Auto Tuning should be used to memorize all the active channels in
your area before you are able to use the TV.
There are two ways of storing channels in the TV's memory. You
can use either.
One is called AUTO TUNING and the other is called MANUAL
TUNING.
In AUTO TUNING mode, the TV will memorize the channels in
ascending numerical order. If there are additional channels you
want to add or delete, you can manually add or delete those
channels with Manual Tuning.
- Redo Auto Tuning if the TV is ever moved to another location.
- Auto Tuning will search for channels only through the Antenna
jack.
- If channels numbers for broadcast over-the air TV and cable TV
are duplicated where different channels have the same number,
press the same number buttons again to toggle between:
Broadcast TV Channels
Cable TV Channels
(For example, press 17 to go to the channel, press 17 again to go
to the duplicated channel.)
Auto Tuning
CATV
1
Press the A . P R O G button. A U T O T U N I N G starts the channel search. If you want to stop auto tuning, press the M E N U
button. Only the channels found up to at that time are memorized.
34
MENU
■
You can also use the S e t u p menu to adjust A u t o T u n i n g.
Setup
Setup
Auto Tuning
Auto Tuning
Tuning
Auto
Manual Tuning
Favorite Channel
Manual Tuning
Favorite Channel
DE F G
30
MENU
DE F G
G
MENU
To Start
49%
Stop
MFL41469218-en 4/29/10 2:15 PM Page 31
Manual Tuning: Adding/Deleting Channels
You can add or delete channels from the channel scan manually.
Use the C H D E or NUMBER buttons to select the channel number
you want to add or delete.
2
Press the M E M O R Y / E R A S E button to select M e m o r y or E r a s e.
3
Press the E N T E R button to return to TV viewing.
WATCHING TV / CHANNEL CONTROL
■
1
You can also use the S e t u p menu to adjust M a n u a l T u n i n g.
Setup
Setup
Auto Tuning
Manual Tuning
Auto Tuning
Manual Tuning
Tuning
Manual
Favorite Channel
Favorite Channel
DE F G
MENU
DE F G
G
TV
Memory
Fine
39
0
MENU
1
31
MFL41469218-en 4/29/10 2:15 PM Page 32
WATCHING TV / CHANNEL CONTROL
FINE TUNING ADJUSTMENT
Normally fine tuning is only necessary if reception is poor.
WATCHING TV / CHANNEL CONTROL
Setup
1
2
Auto Tuning
Press the M E N U button and then use D or E button to
select the Setup menu.
Press the G button and then
M a n u a l Tuning.
D
or
E
Manual Tuning
Favorite Channel
button to select
DE F G
MENU
1
3
4
Press the G button and then D or E button to select
F i n e.
Setup
Auto Tuning
Manual
Manual Tuning
Tuning
Favorite Channel
G
TV
Memory
Fine
39
0
Press the F or G button to adjust the picture to your
preference.
DE F G
MENU
2
5
Press the E N T E R button to save.
Setup
Auto Tuning
Manual
Manual Tuning
Tuning
Favorite Channel
TV
Memory
Fine
DE F G
39
00
MENU
3 4
32
MFL41469218-en 4/29/10 2:15 PM Page 33
FAVORITE CHANNELS SETUP
This function lets you select your favorite channels directly.
Repeatedly press the FAV button to select stored favorite channels.
1
2
Press the M E N U button and then use
to select the Setup menu.
D
Press the G button and then
F a v o r i t e C h a n n e l.
button to select
D
or
E
or
E
Auto Tuning
button
Manual Tuning
Favorite Channel
DE F G
MENU
1
3
Press the G button and then D or E button to select
the first favorite channel position.
Setup
Auto Tuning
Manual Tuning
Favorite Channel
Channel
Favorite
4
G
Use the F or G button to set the desired channel
number for first favorite channel.
DE F G
5
Repeat steps 3 to 5 to memorize other favorite channels. You can store up to 8 channels.
6
Press the M E N U button to move to the previous menu.
WATCHING TV / CHANNEL CONTROL
Setup
-------------------------
-----------------
MENU
2 3 4
33
MFL41469218-en 4/29/10 2:15 PM Page 34
WATCHING TV / CHANNEL CONTROL
KEY LOCK
The TV can be set so that the remote control is needed to
control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was
last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL
1
Press the M E N U button and then use
to select the Option menu.
D
2
Press the G button and then use
select Key Lock.
or
or
E
E
button to
Option
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
button
DE F G
D
3
Press the G button and then use D or E button to
select O n or O f f.
4
Press the M E N U button to move to the previous menu.
MENU
1
Option
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
DE F G
G
Off
On
MENU
2 3
! NOTE
G
G
In K e y L o c k ‘O n’, if the TV is turned off, press the /I button on the TV or P O W E R buttons on
the remote control.
With the K e y L o c k O n, the display ‘K e y L o c k O n’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
Option
FACTORY RESET
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
Use to quickly reset all the menu options to their original factory
preset values.
1
DEF G
Press the M E N U button and then D or E button to
select the O p t i o n menu.
MENU
1
Option
2
3
Press the G button and then D or E button to select
F a c t o r y R e s e t.
Press the G button and then F or G button to select
Y E S or N O.
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
DEF G
G
To set
MENU
2
Factory Reset
Yes
F G
No
MENU
3
34
MFL41469218-en 4/29/10 2:15 PM Page 35
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog
picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.
! NOTE
G
Press the R A T I O button repeatedly to select the desired picture format.
You can also adjust A s p e c t R a t i o in the P i c t u r e menu.
■
16:9
Zoom 1
Following selection will lead you to adjust the picture
horizontally, in a linear proportion, to fill the entire
screen (useful for viewing 4:3 formatted DVDs).
Following selection will lead you to view the picture without any alternation, while filling the
entire screen. However, the top and bottom portions of the picture will be cropped.
You can adjust the enlarge proportion of Zoom1
using D or E button.
PICTURE CONTROL
1
If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen
and remain visible.
This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching
video that did not fill the screen, any after-image from the black bars will normally dissipate after a few minutes.
16:9
4:3
Following selection will lead you to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
Zoom 1
D E
Zoom 2
4:3
Just Scan
Following selection will lead to you view the picture of best quality without loss of original picture in high resolution image.
Notes: If there are noise in original picture, you
can see the noise at the edge.
J u s t S c a n operates only in
Component (720p), HDMI(720p) input
source.
Choose Zoom2 when you want the picture to be
altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off
between alteration and screen coverage.
You can adjust the enlarge proportion of Zoom2
using D or E button.
Zoom 2
D E
Just Scan
35
MFL41469218-en 4/29/10 2:15 PM Page 36
PICTURE CONTROL
PRESET PICTURE SETTINGS
(Picture Mode - Preset)
Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu
based on the program category.
Vivid, Standard, and Cinema are programmed for optimum
picture reproduction at the factory and cannot be changed.
PICTURE CONTROL
1
2
■
Press the P I C T U R E button repeatedly to select the picture
appearance setup option as below :
V i v i d , S t a n d a r d , or C i n e m a.
Press the E N T E R button to return to TV viewing.
You can also use the Picture menu to adjust P i c t u r e M o d e.
Picture
Picture
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
Aspect Ratio
Picture Mode
E
DEF G
100
100
50
70
70
0
DEF G
MENU
1
36
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
G
E
100
100
50
70
70
0
Vivid (User)
Standard
Cinema
MENU
2 3
MFL41469218-en 4/29/10 2:15 PM Page 37
MANUAL PICTURE ADJUSTMENT
Picture Mode-User Mode
Backlight
Contrast
Brightness
Sharpness
Color
Tint
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusts the difference between light and dark.
Increases or decreases the amount of white in the picture.
Adjusts the level of crispness in the edges between the light
and dark areas of the picture. The lower the level, the softer
the image.
Adjusts intensity of all colors.
Adjusts the balance between red and green levels.
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then D or E button to select
the P i c t u r e menu.
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
Press the G button and then D or E button to select
P i c t u r e M o d e.
DEF G
E
100
100
50
70
70
0
MENU
1
3
4
Press the G button and then D or E button to select
V i v i d , S t a n d a r d or C i n e m a.
Press the F button and then D or E button to select the
B a c k l i g h t , C o n t r a s t,
desired picture option (B
B r i g h t n e s s, S h a r p n e s s , C o l o r and T i n t).
Picture
Aspect Ratio
Picture Mode
G
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
100
100
50
70
70
0
Vivid (User)
Standard
Cinema
E
DEF G
MENU
2 3
5
6
Press the F or G button to make appropriate adjustments.
Press the M E N U button to move to the previous menu.
Picture
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
Vivid (User)
100
100
50
70
70
0
G
E
DEF G
MENU
4 5
E
• Backlight
100 F
G
E
37
MFL41469218-en 4/29/10 2:15 PM Page 38
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture
Reset” function for each Picture Mode.
Picture
E
Press the M E N U button and then D or E button to select
the P i c t u r e menu.
2
Press the G button and then D or E button to select
A d v a n c e d.
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
DEF G
100
100
50
70
70
0
E
MENU
1
3
4
Press the G button and then D or E button to select
D y n a m i c C o n t r a s t, D y n a m i c C o l o r, N o i s e
R e d u c t i o n, B l a c k L e v e l, F i l m M o d e or C o l o r
T e m p e r a t u r e.
Picture
E
PICTURE CONTROL
1
Cinema
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
100
100
50
70
70
0
G
To Set
E
Press the M E N U button to move to the previous menu.
DEF G
MENU
2
Advanced
Dynamic Contrast
Contrast
Dynamic
G
G
Dynamic Color
Noise Reduction
Off
Low
High
Black Level
Film Mode
Color Temperature
• Red
• Green
DEF G
0
0
E
MENU
3
38
MFL41469218-en 4/29/10 2:15 PM Page 39
Dynamic Contrast
(Off/Low/High)
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Color
(Off/Low/High)
■
Adjusts screen colors so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look
more vivid.
■
Reduces screen noise without compromising video quality.
Noise Reduction
(Off/Low/High)
Film Mode
(On/Off)
Color Temperature
(Cool/Medium/Warm)
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
■ Set black level of the screen to proper level.
■
Makes video clips recorded in film look more natural by eliminating judder effect.
■
Set to warm to enhance hotter colors such as red, or set to cool to make picture
bluish.
PICTURE CONTROL
Black Level
(Low/High)
39
MFL41469218-en 4/29/10 2:15 PM Page 40
PICTURE CONTROL
PICTURE RESET
Returns to the default factory setting for Picture Mode,
Advanced.
E
PICTURE CONTROL
Picture
1
Press the M E N U button and then D or E button to select
the P i c t u r e menu.
2
Press the G button and then D or E button to select
P i c t u r e R e s e t.
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
• Picture Reset
DEF G
100
100
50
70
70
0
MENU
1
4
Press the G button to initialize the adjusted value.
Press the M E N U button to move to the previous menu.
E
3
Picture
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
• Picture Reset
DEF G
100
100
50
70
70
0
G
OK
MENU
2 3
40
MFL41469218-en 4/29/10 2:15 PM Page 41
PICTURE CONTROL
SCREEN SETUP
Manual Configure - Adjustment for screen Position
This function works in the following mode when the signal exist :
HDMI, Component
PICTURE CONTROL
Picture
1
Press the M E N U button and then use
to select the Picture menu.
D
2
Press the G button and then use
select Screen.
or
D
or
E
E
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
button
button to
DEF G
100
100
50
70
70
0
MENU
1
or
E
button to
4
Press the G button and then use D or
select H - P o s i t i o n or V - P o s i t i o n.
E
button to
D
Picture
E
3
Press the G button and then use
select M a n u a l C o n f i g ..
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
100
50
70
70
0
• Picture Reset
Screen
Screen
DEF G
To Set
G
MENU
2
5
Press the
ments.
F
or
G
button to make appropriate adjustScreen
Manual Config.
Reset
6
G
H-Position
V-Position
50
50
Press the M E N U button to move to the previous menu.
DEF G
MENU
3 4 5
41
MFL41469218-en 4/29/10 2:15 PM Page 42
Screen Reset (Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value.
This function works in the following mode when the signal
exist : HDMI, Component
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then use
to select the Picture menu.
D
Press the G button and then use
select Screen.
or
D
or
E
E
button
Aspect Ratio
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
button to
DEF G
100
100
50
70
70
0
MENU
1
Press the G button and then use
select R e s e t.
4
Press the G button.
D
or
E
button to
Picture
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
• Picture Reset
Screen
Screen
DEF G
5
E
3
100
50
70
70
0
To Set
G
MENU
2
Press the M E N U button to move to the previous menu.
Screen
Manual Config.
Reset
DEF G
G
To Set
MENU
3 4
42
MFL41469218-en 4/29/10 2:15 PM Page 43
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS - SOUND MODE
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV
sets the appropriate sound options based on the channel content.
S t a n d a r d, M u s i c, and C i n e m a are preset for optimum sound quality at the factory and are not adjustable.
1
■
SOUND & LANGUAGE CONTROL
2
Press the S O U N D button repeatedly to select the appropriate sound setup as below :
S t a n d a r d, M u s i c, or C i n e m a.
Press the E N T E R button to return to TV viewing.
You can also adjust S O U N D M O D E in the A u d i o menu.
Audio
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
Sound Mode
Mode
Sound
50
50
0
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
MENU
1
G
50
50
Standard
Music
Cinema
0
MENU
2 3
43
MFL41469218-en 4/29/10 2:15 PM Page 44
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
Audio
SOUND & LANGUAGE CONTROL
1
Press the M E N U button and then D or E button to select
the A u d i o menu.
2
Press the G button and then D or E button to select
S o u n d M o d e.
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
0
MENU
1
3
4
Press the G button and then D or E button to select
S t a n d a r d, M u s i c or C i n e m a.
Press the E N T E R button and then D or E button to select
T r e b l e or B a s s.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
44
50
50
5
Press the F or G button to make appropriate adjustments.
6
Press the M E N U button to move to the previous menu.
Standard
50
50
G
To Set
0
MENU
2 3 4 5
MFL41469218-en 4/29/10 2:15 PM Page 45
AUDIO RESET
Settings of selected Sound Mode return to the default factory
settings.
Audio
2
Press the G button and then D or E button to select
R e s e t.
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
50
50
0
MENU
1
3
4
Press the G button.
Press the M E N U button to move to the previous menu.
Audio
Sound Mode
• Treble
• Bass
Reset
•• Reset
Auto Volume
Balance
DEF G
Standard
50
50
G
To Set
0
SOUND & LANGUAGE CONTROL
1
Press the M E N U button and then D or E button to select
the A u d i o menu.
MENU
2 3
45
MFL41469218-en 4/29/10 2:15 PM Page 46
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (AUTO VOLUME)
Auto Volume automatically remains on the same level of volume
if you change programs.
Audio
SOUND & LANGUAGE CONTROL
1
Press the M E N U button and then D or E button to select
the A u d i o menu.
2
Press the G button and then D or E button to select
A u t o V o l u m e.
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
50
50
0
MENU
1
3
4
Press the G button and then D or E button to select O n
or O f f.
Press the M E N U button to move to the previous menu.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
50
50
G
0
Off
On
MENU
2 3
46
MFL41469218-en 4/29/10 2:15 PM Page 47
BALANCE
You can adjust the sound balance of the speakers to the preferred levels.
Audio
Press the M E N U button and then D or E button to select
the A u d i o menu.
2
Press the G button and then D or E button to select
B a l a n c e.
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
DEF G
50
50
0
MENU
1
3
4
Press the G button and then F or G button to make
desired adjustment.
Press the M E N U button to move to the previous menu.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
Balance
DEF G
50
50
SOUND & LANGUAGE CONTROL
1
00 G
MENU
2 3
47
MFL41469218-en 4/29/10 2:15 PM Page 48
SOUND & LANGUAGE CONTROL
STEREO/SAP BROADCASTS SETUP
The TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo program;
if the broadcaster transmits one additional sound signal in
addition to the original one.
Mono: The primary language is heard from left and right speakers.
Signal mode is mono.
Stereo: The primary language is heard from left and right speakers.
Signal mode is stereo.
SAP: The secondary language is heard from left and right speakers
in mono sound.
SOUND & LANGUAGE CONTROL
1
Use the M T S button to select your desired MTS mode in
analog signal. Each time you press the M T S button, M o n o,
S t e r e o, or S A P appear in turn.
2
Press the E N T E R button to return to TV viewing.
! NOTE
G
G
48
Select mono sound mode if the signal is not clear or in poor signal reception areas.
S t e r e o, S A P modes are available only if included on the broadcast signal.
MFL41469218-en 4/29/10 2:15 PM Page 49
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select your language.
Press the M E N U button and then use D or E button to select the
O p t i o n menu.
2
Press the G button and then use
3
Press the G button and then use F or G button to select your desired
language.
4
Press the E n t e r button to move to the previous menu.
D
or E button to select L a n g u a g e.
SOUND & LANGUAGE CONTROL
1
49
MFL41469218-en 4/29/10 2:15 PM Page 50
SOUND & LANGUAGE CONTROL
POWER INDICATOR
It is function to control of IR LED(turn on/ off).
Option
SOUND & LANGUAGE CONTROL
1
Press the M E N U button and then D or E button to select
the O p t i o n menu.
2
Press the G button and then D or E button to select
P o w e r I n d i c a t o r.
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
DEF G
MENU
1
Option
3
4
Press the G button to select S t a n d b y L i g h t or P o w e r
L i g h t.
Press the G button and then D or E button to select O n
or O f f.
Language
Key Lock
Caption/Text
Power Indicator
Factory Reset
DEF G
To set
G
MENU
2 3
Power Indicator
5
Press the M E N U button to move to the previous menu.
Standby Light
Light
Standby
Power Light
DEF G
G
Off
On
MENU
4
50
MFL41469218-en 4/29/10 2:15 PM Page 51
CLOSED CAPTIONS
Closed captioning is a process which converts the audio
portion of a television program into written words which
then appear as subtitles on the television screen. Closed
captions allow viewers to read the dialogue and narration
of television programs.
1. Poor reception conditions are encountered:
• IGNITION:
Picture may flutter, drift, suffer from
black spots, or horizontal streaking.
Usually caused by interference from
automobile ignition systems, neon
lamps, electrical drills, and other
electrical appliances.
• GHOSTS:
Ghosts are caused when the TV signal splits and follows two paths.
One is the direct path and the other
is reflected off tall buildings, hills or
other objects. Changing the direction
or position of the antenna may
improve reception.
• SNOW:
If your receiver is located at the
weak, fringe area of a TV signal, your
picture may be marred by small
dots. It may be necessary to install a
special antenna to improve the picture.
• The picture at left shows a typical caption.
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast four different caption
signals on the same channel. By selecting Mode1 to
Mode2, you can choose which signal you view. Mode1
is usually the signal with the captions, while another
mode might show demonstration or programming
information.
• Your TV might not receive caption signals normally in
the following situations.
■
2. An old, bad, or illegally recorded tape is being played.
3. Strong, random signals from a car or airplane interfere
with the TV signal.
4. The signal from the antenna is weak.
5. The program wasn’t captioned when it was produced,
transmitted, or taped.
1
Use the C A P T I O N button repeatedly to select your caption
Mode 1, Mode 2, Text1, Text2, or Off.
2
Press the E N T E R button to return to TV viewing.
SOUND & LANGUAGE CONTROL
Using Closed Captions
Captions are the subtitles of the dialogue and narration
of television programs. For prerecorded programs,
program dialogue can be arranged into captions in
advance. Its possible to caption a live program by using
a process called real-time captioning, which creates
captions instantly. Real-time captioning is normally done
by professional reporters using a machine shorthand
system and computer for
translation into English.
Captioning is an effective
system for the hearingimpaired, and it can also
aid in teaching language
FOLLOW ME
skills.
You can also adjust C a p t i o n / T e x t in the O p t i o n menu.
51
MFL41469218-en 4/29/10 2:15 PM Page 52
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset
the clock.
Time
TIME SETTING
1
Press the M E N U button and then D or E button to select
the T i m e menu.
2
Press the G button and then D or E button to select
C l o c k.
Clock
Off Time
On Time
Sleep Timer
DEF G
MENU
1
3
Press the G button and then D or E button to set the
hour.
4
Press the G button and then D or E button to set the
minute.
Time
Clock
Off Time
On Time
Sleep Timer
DEF G
G
-- : --
MENU
2 3 4
5
52
Press the M E N U button to move to the previous menu.
MFL41469218-en 4/29/10 2:15 PM Page 53
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset
time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
Once the on time/off time is set, these functions operate daily at the preset
time.
The Off time function overrides the On time function if both are set to the
same time.
The TV must be in standby mode for the On time to work.
1
Clock
Off Time
On Time
Sleep Timer
Press the G button and then D or E button to select
O n/O f f T i m e.
DEF G
MENU
• To cancel O n/O f f T i m e function, select O f f.
3
4
Press the G button and then D or E button to set the
hour.
1
Time
Clock
Off Time
On Time
Sleep Timer
6
G
-- : -Off
Press the G button and then D or E button to set the
minutes.
DEF G
5
TIME SETTING
2
Time
Press the M E N U button and then D or E button to select
the T i m e menu.
For On Time function only
• C h a n n e l: Press the G button and then D or E button to
select the channel.
• V o l u m e: Press the G button and then D or E button to
adjust volume level at switch-on.
MENU
2 3 4
Time
Clock
Off Time
On Time
Sleep Timer
G
-- : -CH
Vol.
On
1
30
Press the M E N U button to move to the previous menu.
DEF G
MENU
2 3 4 5
53
MFL41469218-en 4/29/10 2:15 PM Page 54
TIME SETTING
SLEEP TIMER SETTING
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
1
TIME SETTING
54
Press the S L E E P button repeatedly to select the number of
minutes. First the ‘
off ’ option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60,
90, 120, 180, and 240 minutes.
2
When the number of minutes you want is displayed on the
screen, press the E N T E R button. The timer begins to count
down from the number of minutes selected.
3
To check the remaining minutes before the TV turns off, press
the S L E E P button once.
4
To cancel the Sleep Timer, press the S L E E P button repeatedly to select ‘
off ’.
MFL41469218-en 4/29/10 2:15 PM Page 55
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
■
The remote control
doesn’t work
*This feature is not available for all models.
Is the sleep timer set?
Check the power control settings. Power interrupted.
■ TV will be automatically turned off, in case of no signal for 15 minutes.
■
Power is suddenly
turned off
■
The video does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
APPENDIX
Picture appears slowly
after switching on
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
■
No or poor color
or poor picture
Horizontal/vertical bars
or picture shaking
■
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
■
■
Check antenna (Change the direction of the antenna).
■
Check HDMI cable over version 1.3.
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen
display. In this case use the latest cables that support HDMI version 1.3.
55
MFL41469218-en 4/29/10 2:15 PM Page 56
APPENDIX
The audio does not work.
Press the VOL or VOLUME button.
Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
■
Picture OK & No sound
No output from one
of the speakers
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
Unusual sound from
inside the product
No sound
when connecting HDMI
or USB
APPENDIX
56
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
■ Use normal MP3 file.
■
■
*This feature is not available for all models.
MFL41469218-en 4/29/10 2:15 PM Page 57
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
1
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
CAUTION
G
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
Extended Absence
57
MFL41469218-en 4/29/10 2:15 PM Page 58
APPENDIX
PRODUCT SPECIFICATIONS
22LD310
(22LD310-MA)
MODELS
Dimensions
(Width x Height
x Depth)
With stand
533.4 mm x 397.0 mm x 171.0 mm
(21.0 inch x 15.6 inch x 6.7 inch)
Without stand
533.4 mm x 351.7 mm x 65.0 mm
(21.0 inch x 13.8 inch x 2.6 inch)
Weight
With stand
Without stand
4.8 kg / 10.6 lbs
4.6 kg / 10.1 lbs
MODELS
With stand
667.0 mm x 504.0 mm x 224.0 mm
(26.3 inch x 19.8 inch x 8.8 inch)
805.0 mm x 583.0 mm x 224.0 mm
(31.7 inch x 23.0 inch x 8.8 inch)
Without stand
667.0 mm x 446.2 mm x 80.0 mm
(26.3 inch x 17.6 inch x 3.1 inch)
805.0 mm x 528.0 mm x 79.9mm
(31.7 inch x 20.8 inch x 3.1 inch)
Weight
With stand
Without stand
8.9 kg / 19.6 lbs
7.8 kg / 17.2 lbs
11.5 kg / 25.4 lbs
10.4 kg / 23.0 lbs
APPENDIX
Environment
condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
58
32LD310
(32LD310-MA)
Dimensions
(Width x Height
x Depth)
Power requirement
Television System
Program Coverage
External Antenna Impedance
■
26LD310
(26LD310-MA)
AC100-240V ~ 50/60Hz
NTSC, PAL M-N
VHF 2-13, UHF 14-69, CATV 1-125
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
MFL41469218-en 4/29/10 2:15 PM Page 59
IR CODES
Code Remote control
(Hexa)
Code Remote control
(Hexa)
0F
TV
44
0B
INPUT
1A
ENTER
Q.VIEW
08
POWER
52
SOUND
79
RATIO
4D
PICTURE
10-19
Number Key 0-9
39
CAPTION
09
MUTE
0E
SLEEP
02
VOL G
54
A.PROG
03
VOL F
55
MEMORY/ERASE
00
CH D
1E
FAV
01
CH E
0A
MTS
43
MENU
APPENDIX
59
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising