LG | 22CS410 | LG 22CS410 Owner’s Manual

OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating your set
and retain it for future reference.
22CS410
26CS410
32CS410
P/NO : MFL67559704 (1205-REV00)
www.lg.com
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
ENGLISH
ENG
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
IMPORTANT SAFETY INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
yy
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
Clean only with a dry cloth.
yy
The lightning flash with arrowhead
WARNING/CAUTION
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
Do not block any ventilation openings. Install
yy
in accordance with the manufacturer’s
instructions.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
Do not install near any heat sources such
yy
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Do not defeat the safety purpose of the
yy
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).
ENG
ENGLISH
WARNING/CAUTION
4
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
yy
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
yy
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
yy
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
ENGLISH
ENG
Unplug this apparatus during lightning
yy
storms or when unused for long periods of
time.
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Refer all servicing to qualified service
yy
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Short-circuit
Breaker
Keep the packing anti-moisture material or
yy
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
CAUTION concerning the Power Cord
yy
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
Power
Supply
wall
outlets, extension cords, frayed power
Power Supply
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
Power
if Supply
its appearance indicates damage or
deterioration,
unplug it, discontinue use of
Power Supply
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
Power
Supply
the
cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
Do not stick metal objects or any other
yy
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
Power Supply
IMPORTANT SAFETY INSTRUCTIONS
Warning - To reduce the risk of fire or
yy
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
Do not expose to dripping or splashing and
yy
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
As long as this unit is connected to the AC
yy
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in any
yy
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
yy
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Power Supply
DISCONNECTING DEVICE FROM THE MAIN
yy
POWER
Mains plug is the disconnecting device. The
plug must remain readily operable.
Antenna Lead in Wire
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamp
NEC: National Electrical Code
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
ENG
ENGLISH
Grounding
yy
(Except for devices which are not grounded.)
Ensure that you connect the earth
Power ground
Supply
Short-circuit
wire to prevent possible
electric shock
Breaker
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
5
6
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
ENG
Cleaning
yy
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
yy
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
yy
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
yy
from the TV, unplug the power cord and
contact an authorized service center.
Do not press strongly upon the panel with a
yy
Supply
hand or a sharp objectShort-circuit
such as aPower
nail,
pencil
Breaker
or pen, or make a scratch on it.
Keep the product away from direct sunlight.
yy
Never touch this apparatus or antenna during
yy
a thunder or lightning storm.
When mounting a TV on the wall, make sure
yy
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
yy
to fall into the product, and do not drop
anything onto the screen.
Dot Defect
yy
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
yy
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation
yy
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
If the TV feels cold to the touch, there may
yy
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of this
product with general household waste. Disposal of
this product must be carried out in accordance to
the regulations of your local authority.
TABLE OF CONTENTS
7
TABLE OF CONTENTS
2
LICENSES
2
OPEN SOURCE SOFTWARE NOTICE
3
IMPORTANT SAFETY INSTRUCTIONS
7
TABLE OF CONTENTS
8
INSTALLATION PROCEDURE
ASSEMBLING AND PREPARING
8
10
11
12
12
14
16
17
17
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
-Attaching the stand
-Mounting on a table
-Mounting on a wall
-Tidying cables
-Attaching the Protection cover
18
REMOTE CONTROL
20 WATCHING TV
20
20
21
21
22
22
23
23
Turning the TV on for the first time
Watching TV
Managing channels
-Setting up channels
Using additional options
-Adjusting aspect ratio
-Using the input list
-Locking the buttons on the TV (Child
Lock)
24
ENTERTAINMENT
24
25
26
27
-Connecting USB storage devices
-Browsing files
-Viewing Photos
-Listening to music
28
29
29
30
32
33
33
Accessing Main Menus
Customizing Settings
-Setup Settings
-Picture Settings
-Audio Settings
-Time Settings
-Option Settings
34 MAKING CONNECTIONS
34
35
35
36
37
38
38
38
Connecting to an antenna or cable
Connecting to a HD receiver, DVD, or VCR
player
-HDMI Connection
-Component Connection
-Composite Connection
Connecting to a USB
Connecting to an audio system
-External stereo connection
39
MAINTENANCE
39
39
39
39
Cleaning Your TV
-Screen, frame, cabinet and stand
-Power cord
Preventing “Image burn” or “Burn-in” on
your TV screen
40 TROUBLESHOOTING
42 SPECIFICATIONS
ENG
ENGLISH
8
28 CUSTOMIZING TV SETTINGS
8
ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
ENGLISH
ENG
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
yy
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39
yy
inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit
yy
into your TV's USB port.
B
A
*A
*B
B
A
10 mm (0.39 inches)
18 mm (0.7 inches)
ASSEMBLING AND PREPARING
Remote control,
Batteries (AAA)
(See p.18)
Owner’s manual
Power Cord
(For 26/32CS410)
(For 22CS410)
(For 26/32CS410)
Desk-mount Screw
1 EA
(See p.14)
Stand Screws
2 EA, P4 x 16
(See p.12)
Stand Screws
8 EA, M4 x 20
(See p.13)
(For 26CS410)
(For 32CS410)
Protection cover
(See p.17)
Protection cover
(See p.17)
(For 26CS410)
(For 32CS410)
Stand Body / Stand Base
(See p.13)
Stand Body / Stand Base
(See p.13)
9
(For 22CS410)
ENG
ENGLISH
Stand Body / Stand Base
(See p.12)
10
ASSEMBLING AND PREPARING
Parts and buttons
Image shown may differ from your TV.
yy
Screen
Side Connection panel
USB IN
USB input
Remote control and
Intelligent sensors1
Power indicator
Speakers
ENGLISH
ENG
SETTINGS
OK
SERVICE ONLY
IN
AV IN
VIDEO
Y
L-AUDIO OUT-R
PB
VIDEO
PR
Touch button2
ANTENNA IN
AUDIO R
L/MONO
L
INPUT
AUDIO
R
Touch buttons2
Rear Connection
panel
(See p.34)
COMPONENT
IN
Description
ꔰ/I
Turns the power on or off.
INPUT
Changes the input source.
SETTINGS
Accesses the main menus, or saves your input and exits the menus.
OK ⊙
Selects the highlighted menu option or confirms an input.
-
+
Adjusts the volume level.
v
^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING
11
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
When transporting a large TV, there should
yy
be at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
CAUTION
Avoid touching the screen at all times, as
yy
this may result in damage to the screen.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
ENG
ENGLISH
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
12
ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat
yy
surface to protect the screen from scratches.
Make sure that the screws are fastened completely. (If they are not fastened securely enough, the
yy
TV may tilt forward after being installed.)
Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
yy
NOTE
Remove the stand before installing the TV on a wall mount by performing the stand attachment in
yy
reverse.
ENGLISH
ENG
For 22CS410
2
1
Stand Body
2 EA
3
P4 x 16
Stand Base
ASSEMBLING AND PREPARING
For 26CS410
13
For 32CS410
1
1
4 EA
4 EA
M4 x 20
M4 x 20
Stand Body
Stand Body
Stand Base
Stand Base
2
3
3
ENG
ENGLISH
2
4 EA
M4 x 20
4 EA
M4 x 20
14
ASSEMBLING AND PREPARING
Mounting on a table
Securing the TV to a table
1 Lift and tilt the TV into its upright position on a
table.
-Leave a 10 cm (minimum) space from the
wall for proper ventilation.
(For 26/32CS410)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
WARNING
CAUTION
ENGLISH
ENG
Do not place the TV near or on sources
yy
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
(For 32CS410)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
20
20
CAUTION
When adjusting the angle of the TV, watch
yy
out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
To prevent TV from falling over, the TV
yy
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
15
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
1 Insert and tighten the eye-bolts, or TV brackets
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
NOTE
The Kensington security system is optional.
yy
You can obtain additional accessories from
your local dealer.
ENG
ENGLISH
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
16
ASSEMBLING AND PREPARING
Mounting on a wall
CAUTION
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
We recommend that you use an LG brand wall
mount when mounting the TV to a wall.
10 cm
10 cm
Disconnect the power first, and then move
yy
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
10 cm
NOTE
10 cm
ENGLISH
ENG
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
22CS410
26/32CS410
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
100 x 100
M4
4
LSW100B
200 x 100
M4
4
LSW100B
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
yy
supplied with the wall mount.
ASSEMBLING AND PREPARING
Tidying cables
17
Attaching the Protection cover
(For 26/32CS410)
1 Gather and bind the cables with the cable
management clip.
2 Fix the cable management clip firmly to the TV.
1 Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Cable management clip
CAUTION
Do not move the TV by holding the cable
yy
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Protection cover
NOTE
ENG
ENGLISH
When installing the wall mounting bracket,
yy
use the Protection cover.
This will protect the opening from
yy
accumulating dust and dirt.
18
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the and ends to the label inside the compartment, and close the
battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
Make sure to point the remote control toward at the remote control sensor on the TV.
INPUT
A.PROG
POWER
TV
RATIO MEMORY/ERASE CAPTION
ENGLISH
ENG
FAV
Q.VIEW
ꔰ POWER
Turns the TV on or off.
INPUT (See p.23)
Rotates through inputs.
Also switches the TV on from standby.
TV
Returns to the last TV channel.
A.PROG (See p.29)
Searches for available channels.
RATIO (See p.22)
Resizes an image.
MEMORY/ERASE
Memory or erase each channel
EXIT
SETTINGS
CAPTION
Selects CAPTION mode.
OK
PICTURE
SOUND
Number button
Enters numbers.
MTS
VOL
MUTE
SLEEP
CH
FAV (See p.21)
Accesses your favorite channel list.
Q.VIEW
Alternates between the two last channels selected
(pressing repeatedly).
REMOTE CONTROL
INPUT
A.PROG
POWER
TV
RATIO MEMORY/ERASE CAPTION
SETTINGS (See p.28)
Accesses the main menu.
EXIT ꕯ
Clears all on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK ꔉ
Selects menus or options and confirms your input.
FAV
Q.VIEW
PICTURE (See p.30)
Selects the factory preset picture depend on the viewing
environment.
SOUND (See p.32)
Selects the factory preset sound for type of program.
EXIT
SETTINGS
OK
VOL
Adjusts the volume level.
SOUND
MUTE
Mutes all sounds.
MTS
MUTE
SLEEP
MTS
Selects the MTS sound: Mono, Stereo, or SAP.
CH
SLEEP (See p.33)
Select the amount of time before your TV turns off
automatically.
CH
Scrolls through the saved channels.
Control buttons
Controls the USB compatible devices.
Not functional
ENG
ENGLISH
PICTURE
VOL
19
20
WATCHING TV
WATCHING TV
Watching TV
Turning the TV on for the first
time
1 In Standby mode, press the
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
3 To turn the TV off, press the
1 Connect the power cord to a power outlet.
2 In Standby mode, press the power button on
the remote control to turn the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Factory Reset by
yy
accessing Option in the main menu.
ENGLISH
ENG
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language
Selects a language to
display.

Auto Tuning
Scans and saves available
channels automatically.
4 When the basic settings are complete,
press OK.
NOTE
If you do not complete the Initial setting,
yy
it will appear whenever the TV turns on.
Disconnect the power cord from the
yy
power outlet when you do not use the
TV for a long period of time.
5 To turn the TV off, press the power button on
the remote control.
(POWER)
button on the remote control to turn the TV on.
2 Press INPUT and select TV.
(POWER)
button on the remote control.
The TV switches to Standby mode.
WATCHING TV
Managing channels
21
Using favorite channels
1 Press SETTINGS to access the main menus.
Setting up channels
2 Press the Navigation buttons to scroll to Setup
and press OK.
Storing channels
To store channels automatically,
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to Setup
and press OK.
3 Press the Navigation buttons to scroll to Auto
Tuning and press OK.
The TV scans and saves available channels
automatically.
NOTE
3 Press the Navigation buttons to scroll to
Favorite Channel and press OK.
4 Edit channels using the following buttons.
Button
Description
m v
Select the first favorite channel
position.
◄ s
Set the desired channel number for
first favorite channel.
OK ꔉ
Selects the highlighted channel to
view.
5 When you are finished, press SETTINGS.
If the TV scans and saves channels,
yy
the previously saved channels will be
overwritten.
To store channels manually,
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll Setup
and press OK.
3 Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4 Scroll through the channel, and then memory
or erase channels.
5 When you are finished, press SETTINGS.
NOTE
The channels are stored in the order of TV
yy
and CATV.
ENG
ENGLISH
4 When you are finished, press SETTINGS.
22
WATCHING TV
Using additional options
Adjusting aspect ratio
- 14:9: You can view a picture format of 14:9
or a general TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way as
in 4:3, but is moved to the up and down.
(This function works in RF/AV Mode.)
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
You can also change the image size by
yy
accessing Aspect Ratio in the Picture menu.
The available ratio varies depending on the
yy
input source.
- 16:9: Resizes images to fit the screen width.
(This function works in RF/AV/Component/
HDMI/USB Mode.)
- Zoom 1: The following selection will allow
you to view the picture without any alteration,
while filling the entire screen. However, the
top and bottom of the picture will be cropped.
(This function works in RF/AV Mode.)
ENGLISH
ENG
- Zoom 2: Choose Zoom 2 when you wish
-- Original: When your TV receives a wide screen
signal it will automatically change to the picture
format broadcasted.
(This function works in RF/AV Mode.)
-- 4:3: Resizes images to the previous standard
4:3.
(This function works in RF/AV/Component/
HDMI Mode.)
the picture to be altered, both horizontally
extended and vertically cropped. The picture
adopting a compromise between alteration and
screen coverage.
(This function works in RF/AV Mode.)
- Just Scan: Displays video images in the original
size without removing parts of the edge of the
image.
(This function works in Component/HDMI
(720P/1080i/1080p) Mode.)
NOTE
If you enlarge or reduce an image, the image
yy
may be distorted.
WATCHING TV
Using the input list
23
Locking the buttons on the TV
(Child Lock)
Lock the buttons on the TV to prevent any
unwanted operations or accidents by children.
Selecting an input source
1 Press INPUT to access the input sources.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons or INPUT button
2 Press the Navigation buttons to scroll to Option
to scroll to one of the input sources and press
OK.
Input
Input source
3 Press the Navigation buttons to scroll to
Key Lock and press OK.
TV
AV
Component
HDMI
USB
mv
and press OK.
4 Select On to activate the Key lock feature.
-To deactivate the Key lock feature, select Off.
5 When you are finished, press SETTINGS.
ꔉ
Description
Watch TV over the air and cable.
AV
Watch the contents in a VCR or other
external devices.
Component
Watch the contents in a DVD or other
external devices, or through a digital
set-top box.
HDMI
Watches contents in a HTS or other
high definition devices.
USB
Select it when using USB depends on
connector.
ENG
ENGLISH
TV
24
ENTERTAINMENT
ENTERTAINMENT
Connecting USB storage devices
Connect USB storage devices such as a USB
flash drive or external hard drive to the TV and use
multimedia features (See "Browsing files" on p. 25).
IN 3 USB IN
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
or
CAUTION
A
VIDEO L/MONO AUDIO
R
ENGLISH
ENG
Do not turn the TV off or remove a USB
yy
storage device while the USB storage
device is connected to the TV, as this could
result in loss of files or damage to the USB
storage device.
Back up your files saved on a USB storage
yy
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
AV IN 2
Tips for using USB storage devices
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
yy
through a USB hub, the device is not
recognizable.
A USB storage device using an automatic
yy
recognition programme may not be
recognized.
A USB storage device which uses its own
yy
driver may not be recognized.
The recognition speed of a USB storage
yy
device may depend on each device.
Please do not turn off the TV or unplug
yy
the USB device when the connected USB
storage device is working. When such
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
Please do not connect the USB storage
yy
device which was artificially manoeuvred on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files.
Please use only a USB storage device which
yy
was formatted as a FAT16 or FAT32 file
system.
Please connect a USB storage device with
yy
the cable offered by the device maker.
Some USB storage devices may not be
yy
supported or operated smoothly.
Be sure to back up important files since data
yy
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
If a USB memory device is connected to a
yy
USB multi-card reader, its volume data may
not be detected.
If the USB memory device does not work
yy
properly, disconnect and reconnect it.
How fast a USB memory device is detected
yy
differs from device to device.
The recommended capacity is 32 GB or less
yy
for USB memory.
Any device with more than the
yy
recommended capacity may not work
properly.
USB storage devices below USB 2.0 are
yy
supported as well. But they may not work
properly in the movie list.
Maximum of 999 folders or files can be
yy
recognized under one folder.
If there are a lot of folders or files all within
yy
one folder, the device may not be able to
access these properly.
ENTERTAINMENT
Browsing files
25
Tips for using USB storage devices
Access the photo or music lists and browse files.
Type
Supported File Formats
Photo yyJPEG
1 Connect a USB storage device.
2 Press INPUT button to scroll to Input menus.
3 Press the Navigation buttons to scroll to USB
and press OK.
4 Press the Navigation buttons to scroll to
Music yyMP3
Photo List or Music List and press OK.
yyBit rate range 32 Kbps - 320 Kbps
yySampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz,
24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz,
12 kHz
* A copy-protected file will not play.
USB
Photo List
Music List
OK
Photo List
Page 1/1
yyAvailable size
Baseline: 64 pixel (W) x 64 pixel (H) 8192 pixel (W) x 8192 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1024 pixel (W) x 768 pixel (H)
* It may take some time to open
high-resolution images in full screen.
2
001
003
3
004
005
1
Upper Folder
ꔂ Move
No.
1
2
3
ꔉ Option
ꔵ Change Page
ꘂ Mark
ꕯ Exit
Description
Moves to the upper level folder.
Current page / Total pages
Contents under the current folder
ENG
ENGLISH
002
26
ENTERTAINMENT
Viewing Photos
NOTE
You can view image files saved on a USB storage
device. The displays on the screen may differ
based on the model.
1 Press INPUT to access the input menus.
2 Press the Navigation buttons to scroll to USB
and press OK.
yy : Abnormal files are displayed using this
graphic.
yy : Non-supported files are displayed
using this graphic.
6 The following options are available while
viewing photos.
3 Press the Navigation buttons to scroll to
Photo List and press OK.
4 Press the Navigation buttons to scroll to a
folder/file you want and press OK.
5 View photos by using the following menus/
ꔊ
buttons.
� Slideshow
Options
Photo List
Page 1/1
001
ENGLISH
ENG
ꔵ Change Page
ꘂ Mark
Page 1/1
xxx.jpg
Close
xxx.jpg
NOTE
Upper Folder
ꔂ Move
Button
ꔉ Option
ꔵ Change Page
ꘂ Mark
ꕯ Exit
Scrolls the file.
ꔉOK
Open the pop-up menu.
CH (+, -)
Moves to the previous or next
page.
FAV
Marks or Unmarks each file.
Menu
꘤
(Rotate)
Description
Navigation
button
Description
View
Views the selected photo.
Mark All
Selects all files
Unmark All
Clears all of your selections.
Close
Close the pop-up menu
Number of selected photos
Rotates photos clockwise (90°,
180°, 270°, 360°).
View
Mark All
xxx.jpg
xxx.jpg
Close
BGM
yyTurns the background music on
or off. To set the background
(Background
music folder, select Option.
Music)
Menu
Upper Folder
000
Slideshow
ꕯ Exit
Photo List
Option
ꔆ
Description
004
005
ꔉ Option
�
ꔋ
yyStarts or stops a slideshow with
selected photos.
yyIf there are no selected photos,
all photos saved in the current
folder display during a slideshow.
yyTo set a slideshow speed, select
Option.
003
ꔂ Move
▲
Option
002
Upper Folder
� BGM
002/004
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than
the supported resolution
size.
yySlide Speed: Selects a slideshow
speed (Fast, Normal, Slow).
yyMusic Folder: Selects a music
folder for the background music
Option
NOTE
yyYou can't change the music
folder while the background
music is playing.
Close
yyThe option bar at the bottom of
the screen disappears.
ENTERTAINMENT
Listening to music
27
6 Control playback by using the following
buttons.
1 Press INPUT to access the input menus.
2 Press the Navigation buttons to scroll to USB
and press OK.
Music List
Page 1/1
3 Press the Navigation buttons to scroll to
Music List and press OK.
folder/file you want and press OK.
Upper Folder
ꔂ Move
5 Play music by using the following menus/
buttons.
Music List
Page 1/1
Duration
Title
001
ꔉ Option
Button
ꕗ
ꔂ Move
ꔉ Option
ꘂ Mark
2 : 21
1 : 06
ꔵ Change Page
ꘂ Mark
ꕯ Exit
Description
Stops playback.
Plays a music file.
Pauses or resumes playback.
ꕚ
Skips to the previous file.
ꕙ
Skips to the next file.
Exit
ꔵ Change Page
3 : 43
003.mp3
004.mp3
ꕘ
003
Upper Folder
002.mp3
ꕖ
002
004
005
♪ 3 : 07
001.mp3
0:00
/3:07
4 Press the Navigation buttons to scroll to a
Duration
Title
Upper Folder
When you press the EXIT button,
only the music will be stopped and
the player will not return to normal
TV viewing.
ꕯ Exit
Page 1/1
Duration
Menu
Title
Upper Folder
Play 3 : 07
BGM
3 : 43
Mark All
2 : 21
Close 1 : 06
001.mp3
002.mp3
0:00
/0:00
003.mp3
004.mp3
Upper Folder
ꔂ Move
ꔉ Option
Button
ꔵ Change Page
ꘂ Mark
ꕯ Exit
Description
Navigation
button
Scrolls the file.
ꔉOK
Open the pop-up menu.
CH (+, -)
Moves to the previous or next
page.
FAV
Menu
Marks or Unmarks each file.
Description
Play
Plays the selected music file.
BGM
Start playing the selected music
files and then move to the Photo
List.
Mark All
Selects all files.
Unmark All
Clears all of your selections.
Close
Close the pop-up menu
yy : Abnormal files are displayed using this
graphic.The TV will not play copy protected
files.
A damaged or corrupted music does not
yy
play but displays 00:00 in playtime.
A music downloaded from a paid service
yy
with copyright protection does not start
but displays inappropriate information in
playtime.
Title
Upper Folder
001.mp3
0:00
/3:07
Upper Folder
Duration
♪ 3 : 07
002.mp3
3 : 43
003.mp3
004.mp3
2 : 21
1 : 06
Time elapsed File name
ENG
ENGLISH
NOTE
Music List
28
CUSTOMIZING TV SETTINGS
CUSTOMIZING TV SETTINGS
Accessing Main Menus
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finis hed, press EXIT.
Menu
ENGLISH
ENG
?
?
??
?
Description
Setup
Sets up and edit channels.
Picture
Adjusts the image size, quality, or effect.
Audio
Adjusts the sound quality, effect, or volume level.
Time
Sets the time, date, or Timer feature.
Option
Customizes the general settings.
CUSTOMIZING TV SETTINGS
29
Customizing Settings
Setup Settings
Setup
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to Setup and press OK.
Auto Tuning
Manual Tuning
Favorite Channel
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
-To return to the previous level, press SETTINGS.
▲▼◄s ꔉ Settings
The available channel settings are described in the following.
Setting
Description
Auto Tuning
Tunes and stores all available channels through antennas or cable inputs.
Manual Tuning
Tunes and stores the channels you want manually.
Option
Favorite Channel
Normally fine tuning is only necessary if reception is poor.
Selects your favorite channels directly (See p.21).
ENG
ENGLISH
Fine
30
CUSTOMIZING TV SETTINGS
Picture Settings
Picture
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to Picture and press OK.
3 Press the Navigation buttons to scroll to the setting or option you
want and press OK.
-To return to the previous level, press SETTINGS.
Aspect Ratio
Energy Saving
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint
• Advanced
• Picture Reset
100
100
50
70
70
0
▲▼◄s ꔉ Settings
The available picture settings are described in the following.
Setting
Description
Aspect Ratio
Changes the image size to view images at its optimal size (See p.22).
Energy Saving
Reduces the power consumption by adjusting the screen brightness.
NOTE
ENGLISH
ENG
When you select Screen Off, the screen will be turned off in 3 seconds and
yy
Screen Off will start.
If you adjust “Energy Saving-Minimum, Medium, Maximum”, Backlight
yy
adjustment will be disabled.
Option
Picture Mode
Off
The Energy Saving is off
Minimum/Medium/
Maximum
Selects the brightness level.
Screen off
The screen turns off in 3 seconds.
Selects one of the preset image or customizes options in each mode for the best TV screen
performance. You are also able to customize advanced options of each mode.
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in
a movie theater.
CUSTOMIZING TV SETTINGS
31
Basic Image Options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced
Customizes the advanced options.
Picture Reset
Restores the options of each mode to the factory default.
Advanced Image Options
Setting
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Color
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue,
saturation and luminance so that red, blue and green white look more vivid.
Noise Reduction
Reduces screen noise without compromising video quality.
Black Level
ets black level of the screen to proper level. This function is available in the following
S
modes: RF, AV or HDMI.
»»Low: The reflection of the screen gets darker.
»»High: The reflection of the screen gets brighter.
Film Mode
Makes video clips recorded in film look more natural by eliminating judder effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps).
This feature operates only in RF or AV mode 480i/576i.
Color Temperature
Set to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors
such as blue.
Red/Green/Blue: The adjustment range is -30 to +30.
ENG
ENGLISH
Dynamic Contrast
32
CUSTOMIZING TV SETTINGS
Audio Settings
Audio
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to Audio and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
-To return to the previous level, press SETTINGS.
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
▲▼◄s ꔉ Settings
The available audio settings are described in the following.
Setting
Sound Mode
Description
Selects one of the preset sound modes or customizes options in each mode.
Mode
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Option
ENGLISH
ENG
Treble
Controls the dominant sounds in the output. When you turn up the treble, it will
increase the output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will
increase the output to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Auto Volume
Activates the Auto Volume feature to keep the volume level consistent whenever you change
channels. The volume level may not be consistent due to different signal conditions of broadcasting
stations.
Balance
Adjust balance between the left and right speakers according to your room environment.
CUSTOMIZING TV SETTINGS
33
Time Settings
Time
1 Press SETTINGS to access the main menus.
Clock
Off Time
On Time
Sleep Timer
2 Press the Navigation buttons to scroll to Time and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
-To return to the previous level, press SETTINGS.
▲▼◄s ꔉ Settings
The available time settings are described in the following
Setting
Clock
Description
Sets the time.
Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should set the current
time and date in advance.
NOTE
yyIf you do not press any button within 2 hours after the TV turns on by the On Time feature,
the TV enters the Standby mode automatically.
yyIf you set both Off time and On time features to the same time, the Off time feature
overrides the On time feature.
.
Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the
Sleep timer faature will be set to off.
Option Settings
Option
1 Press SETTINGS to access the main menus.
Language
Key Lock
Caption/Text
Factory Reset
2 Press the Navigation buttons to scroll to Option and press OK.
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
-To return to the previous level, press SETTINGS.
▲▼◄s ꔉ Settings
The available general settings are described in the following.
Setting
Description
Language
Selects a desired language.
Key Lock
Locks or unlocks the buttons on the TV.
Caption/Text
Sets whether to display captions and customize your option in each mode.
Factory Reset
Resets the TV to factory default and erases all stored channels.
Customizes the TV settings to suit your preference. The initial setup screen will appear when you
turn on the TV for the first time.
ENG
ENGLISH
Sleep Timer
34
MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device.
For more information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
yy
cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may
differ from the actual items and a RF cable is optional.
ENGLISH
ENG
VHF Antenna
UHF Antenna
Antenna
ANTENNA IN
Coaxial (75Ω)
Terminal
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
NOTE
Copper wire
Complete all connections between devices,
yy
and then connect the power cord to the
power outlet to prevent damage to your TV.
To improve the picture quality in a poor signal
yy
area, please purchase a signal amplifier and
install properly.
Use a signal splitter to use more than 2 TVs.
yy
If the antenna is not installed properly,
yy
contact your dealer for assistance.
MAKING CONNECTIONS
35
Image shown may differ from your TV.
yy
Connecting to a HD receiver, DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device
and the TV with the HDMI cable as shown in the following illustration.
NOTE
Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
ENG
ENGLISH
IN
(*Not Provided)
HDMI
DVD / Blu-Ray / HD Cable Box / HD STB
36
MAKING CONNECTIONS
Component Connection
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the component cable as shown in the following illustration.
NOTE
If cables are installed incorrectly, it could case the image to display in black and white or with
yy
distorted color.
Check to ensure the cable are matched with the corresponding color connection.
yy
AV IN
L
RED
(*Not Provided)
(*Not Provided)
RED
WHITE
RED
BLUE
GREEN
L
VIDEO
COMPONENT
IN
R
AUDIO
RED
PR
VIDEO
WHITE
PB
BLUE
Y
AUDIO R
L/MONO
GREEN
ENGLISH
ENG
VIDEO
R
AUDIO
DVD / Blu-Ray / HD Cable Box
MAKING CONNECTIONS
37
Composite Connection
Transmits the analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown in the following illustration.
NOTE
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the
TV.
AV IN
VIDEO
PB
VIDEO
PR
L
AUDIO
R
COMPONENT
IN
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
VCR / DVD / Blu-Ray / HD Cable Box
ENG
ENGLISH
Y
AUDIO R
L/MONO
38
MAKING CONNECTIONS
Connecting to a USB
Connect a USB storage device such as a USB flash memory or a USB memory card reader to the TV.
USB IN
(*Not Provided)
Connecting to an audio system
Use an optional external audio system instead of the built-in speaker.
External stereo connection
Use to connected either an external amplifier or surround sound system.
ENGLISH
ENG
IN
L-AUDIO OUT-R
(*Not Provided)
(*Not Provided)
External Stereo
ANTENNA IN
L
R
AUDIO IN
USB
MAINTENANCE
MAINTENANCE
39
Preventing “Image burn” or
“Burn-in” on your TV screen
Cleaning Your TV
Clean your TV regularly to keep the best
performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and
yy
disconnect the power cord and all other
cables first.
When the TV is left unattended and unused
yy
for a long time, disconnect the power cord
from the wall outlet to prevent possible
damage from lightning or power surges.
Screen, frame, cabinet and stand
CAUTION
Do not push, rub, or hit the surface with
yy
your fingernail or a sharp object, as this may
result in scratches on the screen and image
distortions.
Do not use any chemicals, such as waxes,
yy
benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage
the screen’s finish and cause discoloration.
Do not spray liquid onto the surface. If water
yy
enters the TV, it may result in fire, electric
shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the
power cord regularly.
ENG
ENGLISH
To remove dust or light dirt, wipe the surface with
a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a
soft cloth dampened in clean water or a diluted
mild detergent. Then wipe immediately with a dry
cloth.
If a fixed image displays on the TV screen for
yy
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
yy
long period of time, image burn may occur on
the letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen
yy
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
40
TROUBLESHOOTING
TROUBLESHOOTING
General
Problem
Solution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to ).
yyCheck if the batteries are still working and properly installed ( to ,
yyCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV
turns on.
yyThe image is muted during the product startup process. This is normal. If the
image does not appear in a few minutes, unplug the TV for 30 seconds and try
again. If the image still does not appear, contact the authorized service center
in your local area.
Cannot connect external devices.
yyRefer to the connect an external device.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings.
Refer to the “Sleep Timer”.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
ENGLISH
ENG
Audio
Problem
Solution
No sound is produced while images yyPress VOL + or - button.
are displaying.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
No output from one of the speakers yyAdjust Balance in the menu option.
Unusual sound from inside the TV is yyA change in ambient humidity or temperature may result in an unusual noise
produced.
when the product turns on or off. There is no problem with your product.
TROUBLESHOOTING
41
Video
Problem
Solution
An image displays in black and
white or the color quality is poor.
yyAdjust the color setting in the menu option.
yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
yyCheck if there are local interferences such as an electrical appliance or power
tool.
Lines or streaks appear on images
yyCheck the antenna or aim the antenna to the proper direction.
Afterimages (ghosts) appear when
the product turns off
yyPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen
appears extremely dark.
yyAdjust the brightness and contrast in the menu option.
“No Signal” appears on the screen. yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the panel.
This is normal.
The display offset is wrong.
yyAdjust the position setting in the menu option.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background
of the screen.
yyCheck the video cable connections.
The reception on some channels is
poor
yyScroll to other channels. There may a problem with the broadcast.
yyThe station signal may be weak. Aim the antenna to the proper direction.
yyCheck if there is local interference such as an electrical appliance or power
tool.
ENG
ENGLISH
Black spots appear on the screen.
42
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
AC100 - 240 V - 50/60 Hz
Television System
NTSC, PAL-M/N
Program Coverage
VHF2-13, UHF14-69, CATV 1-125
External Antenna Impedance
75 Ω
Environment
condition
Operating
Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
MODELS
22CS410
(22CS410-MB)
26CS410
(26CS410-MB)
ENGLISH
ENG
Dimensions
(W x H x D)
With stand
539.0 mm x 400.0 mm x 164.6 mm
663.0 mm x 483.0 mm x 197.0 mm
Without stand
539.0 mm x 345.0 mm x 56.8 mm
663.0 mm x 424.0 mm x 72.8 mm
Weight
With stand
4.2 kg
7.4 kg
Without stand
3.9 kg
6.6 kg
0.8 A / 50 W
1.0 A / 100 W
Current Value / Power consumption
32CS410
(32CS410-MB)
MODELS
Dimensions
(W x H x D)
With stand
794.0 mm x 565.0 mm x 207.0 mm
Without stand
794.0 mm x 504.0 mm x 73.5 mm
Weight
With stand
9.0 kg
Without stand
8.0 kg
Current Value / Power consumption
1.1 A / 110 W
Component port connecting information
HDMI (DTV) supported mode
Resolution
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
720x480p
31.47
31.50
59.94
60.00
720x576p
31.250
50.00
1280x720p
44.96
45.00
37.500
59.94
60.00
50.00
26.97
27.00
33.71
33.75
67.432
67.50
56.250
23.976
24.00
29.97
30.00
59.94
60.00
50.00
1920x1080p
Component ports on the
TV
Video output ports
on DVD player
Signal
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising