LG | 22LV2500 | LG 22LV2500 Owner’s Manual

OWNER’S MANUAL
LED LCD TV / LCD TV /
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
LED LCD TV MODELS
19LV2500 32LV3500
22LV2500 37LV3500
26LV2500 42LV3500
32LV2500 47LV3500
19LV2520 55LV3500
22LV2520 32LV3520
26LV2520 42LV3520
32LV2520
P/NO : SAC34134216 (1102-REV08)
LCD TV MODELS
26LK330 32LK450
32LK330 37LK450
32LK430 42LK450
42LK430 47LK450
42LK520
47LK520
55LK520
PLASMA TV MODELS
42PW340 42PW350U
50PW340 50PW350U
42PW350 42PW350R
50PW350 50PW350R
50PZ200
60PZ200
www.lg.com
2
LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ENGLISH
ENG
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are registered trademarks of DivX,
Inc. and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
NOTE
LCD
: LED LCD TV, LCD TV
yy : Plasma TV
Image shown may differ from your TV.
yy
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
Plasma
IMPORTANT SAFETY INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
Read these instructions.
Keep these instructions.
Heed all warning.
Follow all instruction.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
Clean only with dry cloth.
yy
Do not block any ventilation openings. Install
yy
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
yy
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Do not defeat the safety purpose of the
yy
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet. (Can differ by country)
ENG
ENGLISH
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
Do not use this apparatus near water.
yy
4
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
yy
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
yy
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
yy
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
ENGLISH
ENG
Unplug this apparatus during lightning
yy
storms or when unused for long periods of
time.
Refer all servicing to qualified service
yy
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Never touch this apparatus or antenna during
yy
a thunder or lightning storm.
When mounting a TV on the wall, make sure
yy
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
yy
to fall into the product, and do not drop
anything onto the screen.
CAUTION concerning the Power Cord:
yy
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
Warning - To reduce the risk of fire or
yy
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
IMPORTANT SAFETY INSTRUCTIONS
Do not expose to dripping or splashing and
yy
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Grounding
yy
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Power Supply
Short-circuit Breaker
As long as this unit is connected to the AC
yy
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in any
yy
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
yy
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Cleaning
yy
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
yy
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
yy
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
yy
from the TV, unplug the power cord contact
an authorized service center.
Do not press strongly upon the panel with
yy
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
Keep the product away from direct sunlight.
yy
ENG
ENGLISH
DISCONNECTING DEVICE FROM THE MAIN
yy
POWER
The power outlet must remain readily
accessed in the event the device needs to
be unplugged.
5
6
IMPORTANT SAFETY INSTRUCTIONS
yyDot Defect
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
yy
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
ENGLISH
ENG
Take care not to touch the ventilation
yy
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
Viewing 3D Imaging (For 3D TV)
yy
- When viewing 3D imaging, watch the TV
from an effective viewing angle and within
the appropriate distance. If you exceed this
viewing angle or distance, you may not be
able to view the 3D imaging. Furthermore,
the 3D imaging may not display if it is viewed
while you are lying down.
- If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.
- Watching the TV or playing video games
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
- Pregnant woman, seniors, persons with
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
- Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
- Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
- Warning for photosensitization seizure: Some
viewers may experience a seizure or epilepsy
when exposed to certain factors, including
flashing lights or images in TV or video
games. If you or anybody from your family
has a history of epilepsy or seizure, please
consult with your doctor before watching 3D
TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different
in each eye, they should watch the TV after
taking vision correction measures.
- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV.
- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.
- Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness
of your situation before moving.
IMPORTANT SAFETY INSTRUCTIONS
yyLCD
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out
in accordance to the regulations of your local
authority.
7
For USA and Canada
FCC NOTICE
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of the cable
entry as practical.
ENG
ENGLISH
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved
by the party responsible for compliance
could void the user’s authority to operate the
equipment.
8
TABLE OF CONTENTS
TABLE OF CONTENTS
2
3
8
LICENSES
IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
44
Using the quick menu
45
Using the customer support
45
- Testing the Picture / Sound
45
- Using the product or service information
46 3D IMAGING (FOR 3D TV)
ENGLISH
ENG
46
3D Technology
10 ASSEMBLING AND PREPARING
47
- When using 3D Glasses
47
- 3D Imaging Viewing Range
10
Unpacking
48
Viewing 3D Imaging
14
Optional Extras
15
Parts and buttons
23
Lifting and moving the TV
23
Setting up the TV
50
- Connecting USB storage devices
23
- Attaching the stand
51
- Browsing files
28
- Mounting on a table
53
- Viewing Videos
30
- Mounting on a wall
56
- DivX registration code
31
- Tidying cables
57
- Viewing Photos
59
- Listening to music
32 REMOTE CONTROL
50 ENTERTAINMENT
61 CUSTOMIZING TV SETTINGS
36 WATCHING TV
61
The Main Menus
62
Customizing Settings
36
Connecting to an antenna or cable
62
- CHANNEL Settings
36
- Connecting an antenna or basic cable
63
- PICTURE Settings
36
- Connecting a cable box
67
- AUDIO Settings
37
Connecting to the AC/DC adapter
68
- TIME Settings
37
Turning the TV on for the first time
69
- LOCK Settings
38
Watching TV
71
- OPTION Settings
38
Managing channels
38
- Setting up channels
39
- Using favorite channels
73 MAKING CONNECTIONS
40
- Checking current program info
74
Connection Overview
42
Using additional options
75
Connecting to a HD receiver, DVD, or
42
- Adjusting aspect ratio
VCR player
43
- Changing AV modes
75
43
- Using the input list
75
- DVI to HDMI Connection
44
- Locking the buttons on the TV (Child
76
- Component Connection
76
- Composite Connection
Lock)
- HDMI Connection
TABLE OF CONTENTS
77
Connecting to a PC
77
- HDMI Connection
77
- DVI to HDMI Connection
78
- RGB Connection
79
Connecting to an Audio System
79
- Digital optical audio connection
79
Connecting to a USB
79
Connecting to a Headphone (
80
SIMPLINK Connection
80
- Activating and Using the SIMPLINK
LCD
9
)
menus
81 MAINTENANCE
Cleaning Your TV
81
- Screen and frame
81
- Cabinet and stand
81
- Power cord
81
Preventing “Image burn” or “Burn-in” on
your TV screen
82 TROUBLESHOOTING
84 SPECIFICATIONS
90 IR CODES
92 EXTERNAL CONTROL DEVICE
SETUP
100OPEN SOURCE LICENSE
ENG
ENGLISH
81
10
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control and batteries (AAA)
Owner’s manual
ENGLISH
ENG
Polishing cloth1
(Depending on model)
1 Gently wipe the spots on the cabinet with the polishing cloth.
CD manual
ASSEMBLING AND PREPARING
11
PW340, PW350, PW350U, PW350R, PZ200 series
(Other models)
x4
(For 60PZ200)
x4
x3
x3
M4 x 28 M5 x 24
M4 x 26 M5 x 14.5
Screw for assembly
Power Cord
Protection cover
Cable holder
Power Cord holder
Ferrite core
(Depending on model)
Protection cover tape
32LV2500, 32LV2520, LV3500, LV3520 series
x8
M4 x 14
(For 32LV2500, 32LV2520,
32/37LV3500, 32LV3520)
x8
M4 x 12
Screw for assembly
Composite gender cable
Cable holder
Screw for fixing
Power Cord
AC/DC Adapter
19/22/26LV2500, LV2520 series
x2
M4 x 16
x2
M4 x 6
Screw for assembly
Cable holder
ENG
ENGLISH
(32LV2500,
(LV3500,
32LV2520) LV3520 series)
12
ASSEMBLING AND PREPARING
LK330, LK430, LK450, LK520 series
(Except 47LK450,
47/55LK520)
x8
M4 x 20
Screw for assembly
Screw for fixing
Protection cover
Power Cord
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
ENGLISH
ENG
ASSEMBLING AND PREPARING
13
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
) How to use the ferrite core
yy(
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
Plasma
10 mm (+/-5 mm)
[to an External device]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 1]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[to a wall plug]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 2]
[to a wall plug]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 3]
-If there is one ferrite core, follow as shown in Figure 1.
-If there are two ferrite cores, follow as shown in Figures 1 and 2.
-If there are three ferrite cores, follow as shown in Figures 1 and 3.
( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10
yy
mm (0.39 inches) thick and 18 mm (0.7 inches) width.
B
A
*A
*B
B
A
10 mm (0.39 inches)
18 mm (0.7 inches)
ENG
ENGLISH
3 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall
plug.
14
ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG Plasma TV.
3D Glasses
(AG-S230, AG-S250, AG-S270)
D-sub 15 pin signal cable1
1 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable
with a ferrite core to maintain standards compliance for the product.
ENGLISH
ENG
ASSEMBLING AND PREPARING
15
Parts and buttons
PW340, PW350, PW350U, PW350R, PZ200 series
Screen
Side Connection panel
IN 3 USB IN
USB input
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
Remote control and
intelligent1 sensors
AV IN 2
Speakers
HOME
INPUT
ENTER
CH
VOL
Touch buttons2
ENG
ENGLISH
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
VIDEO
2
RGB IN (PC)
AV IN 1
L/MONO
AUDIO R
AUDIO IN
(RGB/DVI)
2
Y
PB
R
PR L
1
RS-232C IN
(CONTROL & SERVICE)
VIDEO
AUDIO
COMPONENT IN
1
REMOTE
CONTROL IN
ANTENNA
/CABLE
IN
Rear Connection panel
(See p.73)
Touch button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
16
ASSEMBLING AND PREPARING
32LV2500, 32LV2520, LV3500, LV3520 series
Screen
Remote control and
intelligent1 sensors
Power indicator
Speakers
VOL
ENTER
HOME
Touch buttons2
INPUT
ENGLISH
ENG
USBIN
IN
USB
CH
COMPONENT IN
H/P
AV IN 2
VIDEO / AUDIO
L
R
1
PR
2
ANTENNA /
CABLE IN
AUDIO
/ DVI IN
LAN
L/MONO AUDIO R
RS-232C IN(CONTROL & SERVICE)
VIDEO
RGB IN(PC)
PB
AV IN 1
IN
IN 33
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
2
1
Rear Connection panel
(See p.73)
OPTICAL DIGITAL ANTENNA/
AUDIO OUT
CABLE IN
Touch button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
ASSEMBLING AND PREPARING
17
19/22/26LV2500, LV2520 series
Screen
HDMI input
Remote control and
intelligent1 sensors
IN 3
USB input
USB IN
Side Connection panel
Power indicator
Headphone
output
Speakers
CH
ENG
ENGLISH
PR
VIDEO
L
ANTENNA /
CABLE IN
R
AUDIO
AUDIO
L/MONO
Rear Connection panel
(See p.73)
R
/ DVI IN
PB
AV IN
VIDEO
DC-IN
RS-232C IN(CONTROL & SERVICE)
2
Touch buttons2
INPUT
COMPONENT IN
(RGB/DVI)
AUDIO IN
RGB IN (PC)
HOME
ENTER
Y
OPTICAL
DIGITAL
AUDIO OUT
VOL
1
Touch button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
18
ASSEMBLING AND PREPARING
LK450 series
Side Connection panel
Headphone
output
AV (Audio
and Video)
input
USB IN
IN 3
HDMI input
Remote control and
intelligent1 sensors
Power indicator
VIDEO L/MONO AUDIO R
USB input
Screen
Speakers
VOL
CH
ENTER
HOME
Touch buttons2
INPUT
AV IN 2
OPTICAL DIGITAL
AUDIO OUT
COMPONENT IN
(RGB/DVI)
AUDIO IN
Y
ENGLISH
ENG
32/37/42/47LK450-UB
ANTENNA /
CABLE IN
L
R
1
PR
2
PB
/ DVI IN
AUDIO
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
RGB IN (PC)
VIDEO
AV IN 1
2
Rear Connection panel
(See p.73)
1
Touch button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
ASSEMBLING AND PREPARING
19
26LK330
Side Connection panel
Screen
USB IN
CH
USB input
VOL
Buttons2
ENTER
HOME
Headphone
output
IN 3
Remote control
Speakers
Power indicator
AV IN 2
COMPONENT
IN
AUDIO IN
(RGB/DVI)
Y
OPTICAL DIGITAL
AUDIO OUT
PR
L
Button2
ANTENNA /
CABLE IN
R
1
PB
2
AUDIO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
VIDEO
AV IN 1
RGB IN (PC)
ENG
ENGLISH
AV (Audio
and Video)
input
INPUT
VIDEO L/MONO AUDIO R
HDMI input
Rear Connection panel
(See p.73)
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
20
ASSEMBLING AND PREPARING
32LK330
Side Connection panel
Screen
USB IN
CH
USB input
VOL
Buttons2
ENTER
HOME
Headphone
output
AV (Audio
and Video)
input
IN 3
INPUT
VIDEO L/MONO AUDIO R
HDMI input
Remote control and
intelligent1 sensors
Speakers
Power indicator
ENGLISH
ENG
AV IN 2
COMPONENT
IN
AUDIO IN
(RGB/DVI)
Y
OPTICAL DIGITAL
AUDIO OUT
L
Button2
ANTENNA /
CABLE IN
R
1
PR
2
PB
/ DVI IN
AUDIO
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
RGB IN (PC)
VIDEO
AV IN 1
Rear Connection panel
(See p.73)
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
ASSEMBLING AND PREPARING
21
LK430 series
Side Connection panel
Screen
USB input
USB IN
CH
VOL
ENTER
Buttons2
HOME
Headphone
output
Speakers
Power indicator
AV IN 2
COMPONENT IN
(RGB/DVI)
AUDIO IN
Y
OPTICAL DIGITAL
AUDIO OUT
PR
ANTENNA /
CABLE IN
L
Rear Connection panel
(See p.73)
R
1
PB
2
AUDIO
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN (CONTROL & SERVICE)
VIDEO
AV IN 1
RGB IN (PC)
ENG
ENGLISH
AV (Audio
and Video)
input
Remote control
VIDEO L/MONO AUDIO R
HDMI input
IN 3
INPUT
2
1
Button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
22
ASSEMBLING AND PREPARING
LK520 series
Side Connection panel
Screen
USB input
USB IN
CH
VOL
ENTER
Buttons2
HOME
Headphone
output
AV (Audio
and Video)
input
VIDEO L/MONO AUDIO R
HDMI input
IN 3
INPUT
Remote control and
intelligent1 sensors
Speakers
Power indicator
AV IN 2
ENGLISH
ENG
COMPONENT IN
(RGB/DVI)
AUDIO IN
Y
OPTICAL DIGITAL
AUDIO OUT
ANTENNA /
CABLE IN
L
Rear Connection panel
(See p.73)
R
1
PR
2
PB
/ DVI IN
AUDIO
RS-232C IN (CONTROL & SERVICE)
VIDEO L/MONO AUDIO R
RGB IN (PC)
VIDEO
AV IN 1
2
1
Button2
Description
/I
Turns the power on or off.
INPUT
Changes the input source.
HOME
Accesses the main menus, or saves your input and exits the menus.
ENTER ⊙
Selects the highlighted menu option or confirms an input.
- VOL +
Adjusts the volume level.
v CH ^
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the main menus.
yy
ASSEMBLING AND PREPARING
23
Lifting and moving the TV
Setting up the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.
Put your TV on a pedestal stand and mount the TV
on a table or wall.
CAUTION
Avoid touching the screen at all times, as
yy
this may result in damage to the screen.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
When holding the TV, the screen should face
yy
away from you to prevent damage.
When transporting a large TV, there should
yy
be at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
PW340, PW350, PW350U, PW350R, PZ200 series
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M5 x 14.5
3
M5 x 24
3
Stand Body
Stand Base
ENG
ENGLISH
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
Attaching the stand
24
ASSEMBLING AND PREPARING
3 Secure the TV and the stand with the 4
screws.
To detach the stand,
1 Lay the TV with the screen side down on a flat
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
4
M4 x 28
4
surface.
2 Remove the 4 screws and pull the stand away
from the TV.
Model
Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
M4 x 26
4
M4 x 28
4
CAUTION
ENGLISH
ENG
Tighten the screws firmly to prevent
yy
the TV from tilting forward. Do not over
tighten.
3 Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
-This will protect the opening from
accumulating dust and dirt.
-When installing the wall mounting bracket,
use the Protection cover.
Protection
cover tape
Protection cover
ASSEMBLING AND PREPARING
32LV2500, 32LV2520, LV3500, LV3520 series
1 Lay the TV with the screen side down on a flat
surface.
3 Secure the TV and the stand with the 4
screws.
Model
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
25
Screw for
assembly
32LV2500
M4 x 14
32LV2520
LV3500, LV3520 M4 x 12
series
Number of
screws
4
4
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Model
Screw for
assembly
Number of
screws
32LV2500
32LV2520
M4 x 14
4
Stand Body
CAUTION
Stand Base
Model
Screw for
assembly
LV3500, LV3520 M4 x 12
series
To detach the stand,
Number of
screws
4
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the 4 screws and pull the stand away
from the TV.
Stand Body
Model
Screw for
assembly
32LV2500
M4 x 14
32LV2520
LV3500, LV3520 M4 x 12
series
Stand Base
Number of
screws
4
4
ENG
ENGLISH
Tighten the screws firmly to prevent
yy
the TV from tilting forward. Do not over
tighten.
26
ASSEMBLING AND PREPARING
19/22/26LV2500, LV2520 series
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Screw for assembly
Number of screws
M4 x 6
2
Stand Body
ENGLISH
ENG
Stand Base
3 Secure the TV and the stand with the 2
screws.
Screw for assembly
Number of screws
M4 x 16
2
CAUTION
Tighten the screws firmly to prevent
yy
the TV from tilting forward. Do not over
tighten.
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the 2 screws and pull the stand away
from the TV.
Screw for assembly
Number of screws
M4 x 16
2
ASSEMBLING AND PREPARING
LK330, LK430, LK450, LK520 series
1 Lay the TV with the screen side down on a flat
surface.
27
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
2 Remove the 4 screws and pull the stand away
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
from the TV.
Screw for assembly
Number of screws
M4 x 20
4
2 Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
Screw for assembly
Number of screws
M4 x 20
4
3 Push the supplied protection cover into the
Stand Body
Stand Base
3 Secure the TV and the stand with the 4
screws.
Screw for assembly
Number of screws
M4 x 20
4
Protection cover
CAUTION
Tighten the screws firmly to prevent
yy
the TV from tilting forward. Do not over
tighten.
ENG
ENGLISH
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
28
ASSEMBLING AND PREPARING
Mounting on a table
Securing the TV to a table
1 Lift and tilt the TV into its upright position on a
table.
-Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
42LK520, 32LV2500, 32LV2520, 32/37LV3500,
(For 26/32LK330, 32/42LK430, 32/37/42LK450,
10 cm (4 inches)
10 cm
32LV3520)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
ENGLISH
ENG
Do not place the TV near or on sources
yy
of heat, as this may result in fire or other
damage.
NOTE
Swivel 20 degrees to the left or right and
yy
adjust the angle of the TV to suit your
view.
20
20
WARNING
To prevent TV from falling over, the TV
yy
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
29
Using the Kensington security system (optional)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
NOTE
The Kensington security system is optional.
yy
You can obtain additional accessories from
your local dealer.
ENG
ENGLISH
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
30
ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
We recommend that you use an LG brand wall
mount when mounting the TV to a wall.
Model
37LV3500
42LK430
37/42/47LK450
42/47LK520
42/47/55LV3500
42LV3520
55LK520
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 200
M6
4
LSW200B,
LSW200BG
400 x 400
M6
4
LSW400B,
LSW400BG,
DSW400BG
10 cm (4 inches)
CAUTION
10 cm
10 cm
10 cm
ENGLISH
ENG
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
Model
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
60PZ200
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
400 x 400
M6
4
PSW400B,
PSW400BG,
DSW400BG
600 x 400
M8
4
PSW600B
Model
19/22/26LV2500 32LV2500
19/22/26LV2520 32LV2520
26LK330
32LV3500
32LV3520
32LK330
32LK430
32LK450
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
100 x 100
M4
4
LSW100B,
LSW100BG
Disconnect the power first, and then move
yy
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
200 x 100
M4
4
LSW100B,
LSW100BG
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
yy
supplied with the wall mount.
ASSEMBLING AND PREPARING
31
Tidying cables
PW340, PW350, PW350U, PW350R, PZ200 series
1 Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
LV2500, LV2520, LV3500, LV3520 series
1 Gather and bind the cables with the cable
holder.
Cable holder
Power cord holder
2 Gather and bind the cables with the cable
holder.
LK330, LK430, LK450, LK520 series
1 Gather and bind the cables with the cable
management clip.
Cable holder
CAUTION
Do not move the TV by holding the cable
yy
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Cable management clip
ENG
ENGLISH
2 Fix the cable management clip firmly to the TV.
32
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the and ends to the label inside the compartment, and close the
battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
Make sure to point the remote control toward at the remote control sensor on the TV.
(POWER)
Turns the TV on or off.
ENERGY SAVING (See p.63)
Adjusts the Energy Saving settings.
ENERGY AV MODE INPUT
TV
AV MODE (See p.43)
Selects an AV mode.
SAVING
ENGLISH
ENG
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
INPUT (See p.43)
Rotates through inputs.
Also switches the TV on from standby.
TV
Returns to the last TV channel.
MARK
FAV
VOL
CH
3D
P
A
G
E
MUTE
Home Q.MENU
INFO
ENERGY
Number button
Enters numbers.
ENTER
AV MODE INPUT
ENERGY AV MODE INPUT
LIST (See p.39)
TV
AccessesSAVING
the saved channel list.
- (Dash)
1 between
2 numbers
3
Inserts a dash
such as 2-1 and 2-2.
TV
SAVING
1
2
4
5
7
8
BACK
LIST
0
3
EXIT
3D SETTING
6
FLASHBK 4
5 6
Alternates between the two last channels selected (pressing repeatedly).
FREEZE
9
7
RATIO
FLASHBK
LIST
MARK
FAV
VOL
RATIO
Home Q.MENU
ENTER
9
0
FLASHBK
MARK
FAV
CH
P
A
G
E
VOL
MUTE
INFO
8
RATIO
CH
MUTE
INFO
Home
ENTER
Q.MENU
P
A
G
E
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
REMOTE CONTROL
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
INFO
Home Q.MENU
33
VOL
Adjusts the volume level.
MARK
Selects a menu or option.
FAV (See p.39)
Accesses your favorite channel list.
3D (For 3D TV) (See p.46)
Used for viewing 3D video.
ENTER
MUTE
Mutes all sounds.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
EXIT
BACK
3D SETTING
FREEZE
ENERGY AV MODE INPUTRATIO
ENERGY AV MODE INPUT
TV
TV
SAVING
SAVING
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
FLASHBK
0
FLASHBK
LIST
LIST
VOL
MARK
FAV level.
Adjusts the volume
MARK
FAV
VOL
RATIO
CH
MUTE
INFO
ENG
ENGLISH
1
Home Q.MENU
P
A
G
E
P
A
VOL RATIO CH GE
MARK
Selects a menu or
MUTEoption.
FAV (See p.39)
AccessesINFO
your favorite
channel list.
Home Q.MENU
RATIO (See p.42)
Resizes an image.
ENTER
ENTER
BACK
MUTE
Mutes all sounds.
EXIT
CH
EXIT
BACK
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
4
5
6
REMOTE CONTROL
34 7
8 9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
P
A
G
E
CH
MUTE
INFO
INFO (See p.40)
Views the information of the current program and screen.
Home Q.MENU
Home
Accesses the main menus, or saves your input and exit the menus.
ENTER
Q. MENU (See p.44)
Accesses the quick menu.
EXIT
BACK
3D SETTING
BACK
Allows the user to move back one step in an interactive application or
other user interaction function.
FREEZE
ENERGY AV MODE INPUT
TV
RATIO
SAVING
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
SIMPLINK (See p.80)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
EXIT
Clears all on-screen displays and returns to TV viewing.
MARK
FAV
ENGLISH
ENG
VOL
3D
CH
P
A
G
E
MUTE
INFO
Home Q.MENU
ENTER
BACK
EXIT
3D SETTING
Colored buttons
These access special functions in some menus.
FREEZE
RATIO
3D SETTING (For 3D TV) ( Plasma ) (See p.48)
Used for viewing 3D video.
4
INFO
7
5
6
4
5
6
8
9
7
8
9
0
FLASHBK
0
FLASHBK
Home Q.MENU
ENTER
LIST
LIST
MARK
FAV
VOL
BACK
INFO
3D SETTING
FREEZE
Home Q.MENU
RATIO
MARK
P
A
G
E
VOL
RATIO
CH
P
A
G
E
MUTE
Home
INFO
Q.MENU
Control buttons
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
FREEZE ( Plasma ) ENTER
Freezes the current frame (Not supported when using USB Mode and
Simplink.).
ENTER
BACK
35
FAV
RATIO EXIT
CH
MUTE
REMOTE CONTROL
EXIT
RATIO (See p.42)
BACK
Resizes an image.
EXIT
ENG
ENGLISH
36
WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.
Connecting a cable box
Connect the TV to a cable box and the cable box
to a wall antenna socket with 2 RF cables (75 Ω).
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
ENGLISH
ENG
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
NOTE
Use a signal splitter to use more than 2 TVs.
yy
Visit http://lgknowledgebase.com for more
yy
information about the antenna and cable
connection. Search for antenna.
Copper wire
Complete all connections between devices,
yy
and then connect the power cord to the
power outlet to prevent damage to your TV.
WATCHING TV
Connecting to the AC/DC
adapter
(For 19/22/26LV2500, 19/22/26LV2520)
37
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language
Selects a language to
display.

Mode Setting
Selects Home Use for
the home environment.

Power Indicator
Sets the standby light.
(For LED LCD TV)

Time Zone
AC/DC Adaptor

Auto Tuning
1 Connect the AC/DC adapter plug to the power
input jack on the TV.
2 Connect the power cord to the AC/DC adapter
first, then plug the power cord into the wall
power outlet.
Please be sure to connect the TV to the AC/
yy
DC power adapter before connecting the
TV’s power plug to a wall power outlet.
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
The Power indicator turns red and the TV
switches to Standby mode.
2 In Standby mode, press the power button on
the remote control to turn the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Initial Setting by
yy
accessing OPTION in the main menu.
Scans and saves available
channels automatically.
NOTE
To display images in the best quality for
yy
your home environment, select Home
Use.
Store Demo is suitable for the retail
yy
environment.
If you select Store Demo, any
yy
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
Power Indicator feature is disabled in
yy
Store Demo mode.
4 When the basic settings are complete,
press ENTER.
NOTE
If you do not complete the Initial setting,
yy
it will appear whenever the TV turns on.
Disconnect the power cord from the
yy
power outlet when you do not use the
TV for a long period of time.
5 To turn the TV off, press the power button on
the remote control.
ENG
ENGLISH
CAUTION
Selects the time zone
and daylight saving.
38
WATCHING TV
Watching TV
Managing channels
1 In Standby mode, press the power button on
the remote control to turn the TV on.
2 Press INPUT and select TV.
3 Control the TV using the following buttons
while you are watching TV.
Button
Description
CH (^, v)
Scrolls through saved channels.
LIST
Selects a channel on the saved
channel list.
0-9
Selects a channel by entering
numbers.
VOL (+, -)
Adjusts the volume level.
1
MUTE
Mutes all sounds.
2
ENGLISH
ENG
AV MODE
Selects an AV mode (See p.43).
Q.MENU
Accesses the quick menus
(See p.44).
FLASHBK
Alternates between the last two
channels selected.
RATIO
Resizes an image (See p.42).
FREEZE
Freezes the current frame while you
are watching TV ( Plasma ).
1 The Lock icon (ꔒ) appears in front of a
channel blocked with parental control.
2 Each AV mode has the optimized image and
sound settings. If you select Off, the image
and sound settings will be restored to the
previously customized settings.
4 To turn the TV off, press the power button on
the remote control.
The TV switches to Standby mode.
*The Digital broadcasting (DTV, Cable DTV) is not
available for Philippines.
Setting up channels
Storing channels
To store channels automatically,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to Auto
Tuning and press ENTER.
4 Select Start to start automatic tuning.
The TV scans and saves available channels
automatically.
NOTE
If the TV scans and saves channels,
yy
the previously saved channels will be
overwritten.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
To store channels manually,
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to
Manual Tuning and press ENTER.
4 Scroll through the channel types, and then add
or delete channels.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked channel, you will
yy
be prompted to enter your password to keep
the channel scanned.
You can store up to 1000 channels. The
yy
number of channels that you can store
differs depending on the broadcasting signal
environment.
The channels are stored in the order of DTV,
yy
TV, Cable DTV and Cable TV.
WATCHING TV
Using favorite channels
Editing your channel list
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
CHANNEL and press ENTER.
3 Press the Navigation buttons to scroll to
Channel Edit and press ENTER.
4 Edit channels using the following buttons.
Button
39
Description
Add the channels that you watch frequently to the
favorite list.
Setting up your favorite list
1 Select a channel to add to the favorite list.
2 Press FAV.
3 Press the Navigation buttons to select your
desired favorite channel group.
^
Highlights the channel type.
^, v, < , >
Scrolls through channel types or
channels.
ENTER
Selects the highlighted channel to
view.
CH (^, v)
Moves to the previous or next
page.
Blue button
Adds or deletes a channel.
The deleted channel displays in
blue.
6 Press ENTER to add the selected channel to
FAV
Registers or cancels the current
channel in favorite channel list.
7 When you are finished, press EXIT.
Q.MENU
Selects your desired favorite
channel group.
Yellow
button
Blocks or unblocks a channel.
4 Press the Yellow button to register or cancel
the current channel in favorite channel list.
Press the Blue button to move to Channel Edit.
5 Press the Navigation buttons to scroll to
Favorite.
the favorite list.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting a channel on the channel list
1 Press LIST to access the channel list.
- To move to the previous or next page, press
CH (^, v).
- To tune to the “CHANNEL menu - Channel
Edit”, press Blue button.
2 Select a channel you want and press ENTER.
NOTE
The Lock icon (ꔒ) appears in front of a
yy
channel blocked with parental control.
If you select the blocked channel, you will be
yy
prompted to enter your password.
Selecting a channel on the favorite list
1 Press FAV to access the favorite list.
-To move to the previous or next page, press
CH (^, v).
2 Select a channel you want and press ENTER.
ENG
ENGLISH
NOTE
You can also setup Favorite List in the
yy
CHANNEL menu - Channel Edit.
40
WATCHING TV
Checking current program info
Press ENTER to view the information of the currently program while you are watching.
The following information appears at the top of the screen.
Banner information
8-1
ꔖ DTV
Program title
End time
Brief Info Title Test...
10:10 AM
ꘋꔫ
CNN
Next - 11:40 AM
Start time
Icon
Current time
Sun, Feb 21, 2010 10: 40 AM
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V
News
Progress bar
Description
ENGLISH
ENG
Multilingual
ꔥ
The program contains two or more audio language services. You can change the
audio language using the quick menu.
Dolby Digital
ꔨ
The program contains a Dolby Digital audio signal in TV and HDMI input sources.
Caption
ꔯ
The program contains one or more language caption services. You can change the
caption language using the quick menu.
Aspect ratio
ꔶ
ꔷ
The original aspect ratio of the video is 4:3.
The original aspect ratio of the video is 16:9 (wide).
Resolution
480i
480p
720p
1080i
1080p
The video resolution is 720 x 480i.
The video resolution is 720 x 480p.
The video resolution is 1280 x 720p.
The video resolution is 1920 x 1080i.
The video resolution is 1920 x 1080p.
Rating
ꔒ
The program contains Rating information.
See "LOCK Settings" on p.69.
WATCHING TV
ꔖ DTV 8-1 CNN
Brief Info Title Test...
10:10 AM
ꔀ Ch. Change
▶ Next
41
ꔉ Watch
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ 14 TV-PG D L S V
No information
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
ꔅ Up
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking, ꔅ Down
�
Button
Description
INFO
Shows current channel information.
< or >
Shows previous or next channel
information.
^ or v
Changes a channel.
ENG
ENGLISH
42
WATCHING TV
Using additional options
-
Adjusting aspect ratio
Resize an image t at its optimal size by pressing
RATIO while you are watching TV.
Set By Program: Displays images in the same
aspect ratio as the original image.
(4:3
4:3 )
Set By Program
NOTE
y You can also change the image size by
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menu.
y The available ratio varies depending on the
input source.
- The input sources: HDMI-PC and RGB-PC
support 4:3 and 16:9.
- The input sources: HDMI-PC 1920 X 1080
supports all of the aspect ratios.
ENGLISH
ENG
-
16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the original
size without cutting off the edges.
(16:9
Set By Program
-
NOTE
-
Zoom: Formats an image to fit the screen
width. The top and bottom of the image may
not appear.
NOTE
If you access, Aspect Ratio in the Quick
menus,
y Press < or > to stretch an image
vertically.
y Press ^ or v to move the zoom focus up
or down.
Just Scan
y If you select Just Scan, you may see
image noises at the edge or edges of the
screen.
y The input sources: DTV, Component,
HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.
16:9 )
-
Cinema Zoom: Formats an image to the
cinemascope ratio, 2.35:1.
y To change the ratio of the cinema zoom,
press < or > and its range is from 1 to 16.
y To move the zoom focus up or down,
press ^ or v.
4:3: Resizes images to the previous standard
4:3.
NOTE
y If you enlarge or reduce an image, the
image may be distorted.
WATCHING TV
Changing AV modes
Each AV mode has optimized image and sound
settings.
Press AV MODE repeatedly to select an
appropriate mode.
Mode
Description
Changes to the previously customized
settings.
Uses the optimized image and sound
settings for a cinematic look.
Uses the optimized image and sound
settings for dynamic action sports.
Uses the optimized image and sound
settings for fast gaming.
When playing a video game using
PlayStation or Xbox. it is recommended
to use the Game mode.
When in Game mode, functions related
to picture quality will be optimized for
playing games.
Off
Cinema
Sport
Game
Using the input list
43
RGB-PC
Use the TV as a computer monitor.
HDMI
Watches video from a HTS or other
high definition devices.
The disconnected input sources will be gray.
- To add an input label, press the Blue button.
You can easily identify a device connected to
each input source.
- If you connect a new external device to the
TV, a pop-up window appears. Select Yes on
the pop-up window to switch to that input
source.
- To access the SIMPLINK, press the Red
button. If you select “SIMPLINK and On”,
the pop-up window for the HDMI input will
not display. ( LCD )
Adding an Input label
Add a label to an input source so that you can
easily identify a device connected to each input
source.
Selecting an input source
-The connected device displays on each input
source.
NOTE
You can also access the input source list
yy
by selecting INPUT in the Home menu.
2 Press the Navigation buttons to scroll to one of
Input Label
ꔌ
AV1
◀
AV2
◀
▶
Component1
◀
▶
Component2
◀
▶
RGB-PC
◀
▶
ꔂ Move
▶
ꔍ
the input sources and press ENTER.
Input List
VCR
Close
ꔉ Enter
1 Press INPUT to access the input sources.
TV
USB
AV 1
AV 2
RGB-PC
HDMI1
HDMI2
HDMI3
� SIMPLINK
(
Input source
LCD
Component 1
Component 2
2 Press the Navigation buttons to scroll to one of
the input sources.
3 Press the Blue button.
� Input Label
ꕉ Exit
)
4 Press the Navigation buttons to scroll to one of
the input labels and press ENTER.
5 When you are finished, press EXIT.
Description
TV
Watch TV over the air, cable, and
digital cable broadcast.
USB
Play media files from a thumb drive.
AV
Watch video from a VCR or other
external devices.
Component
Watch video from a DVD or other
external devices, or through a digital
set-top box.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
1 Press INPUT to access the input sources.
44
WATCHING TV
Locking the buttons on the TV
(Child Lock)
Lock the buttons on the TV to prevent any
unwanted operations or accidents by children.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to LOCK
Using the quick menu
Customize frequently used menus.
1 Press Q. MENU to access the quick menus.
2 Press the Navigation buttons to scroll through
the following menus.
◀
and press ENTER.
Aspect Ratio
▶
3 Input password.
1
4 Press the Navigation buttons to scroll to
8
5 Select On to activate the Key lock feature.
7
Key Lock and press ENTER.
-To deactivate the Key lock feature, select Off.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
ENGLISH
ENG
The TV is programmed to remember the last
yy
setting after you turn the TV off.
If you turn the TV off with the Key lock
yy
feature activated, , INPUT, CH (^, v) or
Number buttons on the remote control.
If you press any button on the TV with the
yy
Key lock feature activated,
Key Lock
appears on the screen.
2
A
16:9 �
3
4
6
5
1
2
3
4
5
6
7
8
Menu
Aspect Ratio
Description
Changes the image size (16:9,
Just Scan, Set By Program, 4:3,
Zoom, Cinema Zoom).
Picture Mode Changes the image mode
(Intelligent sensor1, Vivid,
Standard, APS1, Cinema, Sport,
Game, ꕋExpert1, ꕋExpert2).
Sound Mode Changes the sound mode
(Standard, Music, Cinema, Sport,
Game).
Multi Audio
Changes the audio language
(Digital signal).
SAP
Changes the MTS sound (Analog
signal).
Sleep Timer Sets the length of time until the
TV to turns off.
Del/Add
Edits the channels to add or delete
the channel.
Caption
Activates or deactivate the
subtitles.
USB Device Ejects a USB device when a USB
device is connected.
1 Depending on model
NOTE
The available menus and options may
yy
differ from the input source that you are
using.
3 Press the Navigation buttons to scroll to the
option you want.
4 When you are finished, press Q. MENU.
WATCHING TV
45
Using the customer support
Testing the Picture / Sound
To execute picture and sound tests.
1 Press Home to access the main menus.
2 Press the Red button to access Customer
Support.
3 Press the Navigation buttons to scroll Picture
Test or Sound Test and press ENTER.
4 If you have any problem, press the Navigation
buttons to scroll to Yes and press ENTER.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Using the product or service
information
To check the product or service information
2 Press the Red button to access Customer
Support and press ENTER.
3 Press the Navigation buttons to scroll Product/
Service Info..
You can check the various product/Service
infomation based on your model.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
1 Press Home to access the main menus.
46
3D IMAGING
3D IMAGING (FOR 3D
TV)
3D Technology
This TV can display in 3D via 3D broadcasting or
when the TV is connected to a compatible device,
such as a Blu-ray 3D Player. The viewer must
wear compatible 3D glasses in order to see these
images in 3D format.
WARNING
ENGLISH
ENG
When viewing 3D imaging, watch the TV
yy
from an effective viewing angle and within
the appropriate distance. The appropriate
angle and distance are provided in this
manual. If you exceed this viewing angle or
distance, you may not be able to view the
3D imaging. Furthermore, the 3D imaging
may not display if it is viewed while you are
lying down (For LED LCD TV).
If you watch the 3D imaging too closely or
yy
for a long period of time, it may harm your
eyesight.
Watching the TV or playing video games
yy
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
Pregnant woman, seniors, persons with
yy
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
Some 3D imaging may cause you to duck
yy
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
Please prevent children under the age of
yy
5 from watching 3D TV. It may affect their
vision development.
Warning for photosensitization seizure:
yy
Some viewers may experience a seizure or
epilepsy when exposed to certain factors,
including flashing lights or images in TV or
video games. If you or anybody from your
family has a history of epilepsy or seizure,
please consult with your doctor before
watching 3D TV.
Also certain symptoms can occur in
unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.
Risk of photosensitization seizure can be
yy
reduced with the following actions.
» Take frequent breaks from watching 3D
TV.
» For those who have vision that is different
in each eye, they should watch the TV
after taking vision correction measures.
» Watch the TV so that your eyes are on the
same level as the 3D screen and refrain
from sitting too closely to the TV.
» Do not watch the 3D imaging when tired
or sick, and avoid watching the 3D imaging
for a long period of time.
» Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D
TV.
» Some viewers may feel disoriented after
watching 3D TV. Therefore, after you
watch 3D TV, take a moment to regain
awareness of your situation before moving.
3D IMAGING
NOTE
When using 3D Glasses
CAUTION
3D glasses are sold separately. Refer to the
yy
3D glasses manual for operating instructions.
Do not use the 3D glasses to replace your
yy
corrective glasses, sunglasses or protective
goggles.
Do not store the 3D glasses in hot or cold
yy
locations.
Do not drop objects onto the 3D glasses. Do
yy
not drop or bend the glasses.
Since the lenses of the 3D glasses are
yy
easily scratched, make sure to clean only
with a soft cloth. Shake off any dust before
using the cloth since the glasses are easily
scratched.
3D Imaging Viewing Range
TV size, viewing angle & other circumstances
may change the viewing distance and the angle of
view.
Viewing Distance
Viewing Angle
2 m - 10 m
(6.5 ft - 32.8 ft)
120 ° (When the viewing
distance is 2 m (6.5 ft))
ENG
ENGLISH
To watch the TV in 3D, you must put on your
yy
3D glasses. For best results, you should
wear LG Brand 3D glasses. The 3D imaging
may not display properly when using another
brand of 3D glasses. Please see the 3D
glasses manual for instructions on how to
use the 3D glasses.
After powering on the TV, a few seconds
yy
may be needed for your TV to calibrate.
It may take a moment for you to see the
yy
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
program.
If there is an obstacle between the TV and
yy
the 3D glasses, the 3D imaging may not
display properly.
Do not use the TV in close proximity to other
yy
electronic and RF equipments.
In Analog TV, 3D Imaging does not work.
yy
When watching 2D images, it is
yy
recommended to take off the 3D glasses. If
you watch 2D images with the 3D glasses
on, you may see distorted images.
47
48
3D IMAGING
Viewing 3D Imaging
View 2D mode for 3D images
1 Play the 3D video or select 3D channel.
View 3D mode for 3D images
2 Press 3D and select same type in your
1 Play the 3D video or select 3D channel.
(2D to 3D mode is available with all contents.)
2 Press 3D and select same type in your
displayed picture on the screen.
(Select type on "2D Video" tab.)
3D Video
2D Video
displayed picture on the screen.
(Select type on "3D Video" tab.)
3D Video
2D Video
3 To turn off the 2D mode, press 3D and select
ENTER.
Turn off 2D Mode.
3D video
NOTE
Enter
y Turn on the 3D mode automatically for HDMI
input playing the 3D blueray titles.
3 Press ENTER on displayed information
window.
Cancel
Using 3D quick menu option
ENGLISH
ENG
1 Press 3D SETTING.
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
Enter
Cancel
ꔅ 3D Setting
4 To turn off the 3D mode, press 3D and select
ENTER.
2 Use the following options while viewing 3D
imaging.
3D Setting
◀
3D Picture Size
3D Depth
2D mode
Enter
◀
▶
0
◀
▶
3D Picture Balance
◀
Off
▶
3D Picture Correction
◀
Left/Right
▶
Enter
Cancel
ꔅ 3D Setting
▶
15
3D Viewpoint
Turn off 3D Mode.
Just Scan
Button
End 3D video
Description
3D Picture Size
Cuts off the outer edges of the
picture and stretch it to fit the full
screen in 3D mode.
3D Depth
Adjusts the distance between the
object and the background in the
picture to enhance the 3D effect in
2D to 3D mode.
3D Viewpoint
Brings the picture (including both the
object and background images) to
the front or back to enhance the 3D
effect in 3D mode.
3D Picture
Balance
Adjusts the color and brightness
difference between the right and left
sides of the picture in 3D mode.
3D Picture
Correction
Changes the order of images in the
right and left sides of the picture in
3D mode.
3D IMAGING
49
CAUTION
Some menus may not work while watching
yy
the TV in 3D.
The 3D imaging mode is disabled
yy
automatically when switching DTV channels.
The screen may not be displayed properly
yy
if you view 2D DTV images in 3D imaging
mode.
3D effect can be seen when 3D Mode is
yy
selected appropriately for the 3D input signal
supplied to the TV.
For *mpo files (3D camera files), the 3D
yy
imaging mode is enabled automatically.
3D may not be displayed properly for some
yy
PC graphics cards.
NOTE
Energy Saving is disabled while playing in
yy
3D.
ENG
ENGLISH
50
ENTERTAINMENT
ENTERTAINMENT
Connecting USB storage devices
IN 3 USB IN
Connect USB storage devices such as a USB
flash drive or external hard drive to the TV and use
multimedia features (See "Browsing files" on p. 51).
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
or
ENGLISH
ENG
A
VIDEO L/MONO AUDIO
R
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to USB
Device and press ENTER.
3 Disconnect the USB storage device only when
the message says that it is safe to remove.
AV IN 2
CAUTION
Do not turn the TV off or remove a USB
yy
storage device while the USB storage device
is connected to the TV, as this could result
in loss of files or damage to the USB storage
device.
Back up your files saved on a USB storage
yy
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
Tips for using USB storage devices
The TV recognizes only a USB storage
yy
device.
If you connect a USB storage device to the
yy
TV through a USB hub, your TV may not
recognize the USB storage device.
The TV may not recognize a USB storage
yy
device that requires a special driver.
The recognition speed of a USB storage
yy
device may differ depending on the device.
Only use a USB storage device which has
yy
normal music or image files.
Use only USB storage devices that are
yy
formatted as a FAT 32 or NTFS file system.
If you format a USB storage device as a
yy
NTFS file system, you cannot delete the
saved files.
You may need to connect a USB storage
yy
device to an external power supply with a
power adapter.
If the TV does not recognize a connected
yy
USB storage device, replace the cable and
try again. Do not use an excessively long
cable.
The TV does not support some USB storage
yy
devices properly.
You can use a multi-partition (up to 4) USB
yy
storage device.
You can use up to 4 USB storage devices at
yy
a time by using a USB multi-card reader.
The file alignment method of a USB storage
yy
device is similar to the one of Window XP.
You cannot create or delete a folder saved in
yy
a USB storage device directly on the TV.
The number of characters for a file name is
yy
up to 100 English characters.
If there are too many folders and files in one
yy
folder, it may not operate properly.
The recommended capacity for a USB
yy
external hard disk is 1 TB or less and for a
USB storage device is 32 GB or less.
If a USB external hard disk with the Energy
yy
Saving feature does not work, turn the USB
external hard disk off and on again to make
it work properly. For more information, refer
to the user manual of the USB external hard
disk.
USB storage devices below USB 2.0 are
yy
supported as well. But they may not work
properly in the movie list.
The electrostatic can cause USB device’s
yy
malfunction. In this case, USB Device has to
be plugged again.
ENTERTAINMENT
Browsing files
1
Access the photo, music, or movie lists and
browse files.
2
Page 1/1
Music List
USB 1 XTICK
1 Connect a USB storage device.
51
Drive1
Page 1/1
001. - B01 .mp3
002. -B02.mp3
003. B03.mp3
004. - B04.mp3
00:00
00:00
00:00
00:00
3
4
005. - B05.mp3
00:00
2 Press Home to access the main menus.
3 Press the Navigation buttons to scroll to MY
� Move
MEDIA and press ENTER.
ꔅ To Movie List
ꔅ Change Numbers
� Play
ꔅ Mark Mode
� Page Change
� Mark
ꕯ Exit
5
4 Press Navigation buttons to scroll to MOVIE
LIST, PHOTO LIST, or MUSIC LIST and press
ENTER.
No.
MY MEDIA
Movie List
Photo List
Music List
5 Select Drive1 to access the connected USB
storage device.
6 Press the Navigation buttons to Select a folder/
file you want.
2
Moves to the upper level folder.
2
Current page number/total number of
pages
3
Current page number/total number of
pages
4
5
Contents under the folder focused on 1
Button
Description
Available buttons on the remote control
Green
button
Moves to Photo List, Music List, or
Movie List.
Yellow
button
Change Numbers: Changes the number
or thumbnails displayed at a time.
Blue
button
Allows you to mark certain files.
Page 1/1
Movie List
Drive1
USB 1 XTICK
M1
Page 1/1
M2
M3
M4
3
4
Butterfly_...
01:34:33
M5
Tips for using USB storage devices
Type
Supported File Formats
Video yyMPG, MPEG, DAT, TS, TRP, TP, VOD, MP4,
� Move
ꔅ To Photo List
ꔅ Change Numbers
� Play
� Page Change � Mark
ꔅ Mark Mode
5
ꕯ Exit
1
2
Page 1/1
Photo List
USB 1 XTICK
Page 1/1
Drive1
P1
P2
P3
P4
P5
P6
P10
P11
P12
P13
P14
P15
� Move
ꔅ To Music List
ꔅ Change Numbers
� View
ꔅ Mark Mode
P7
P8
� Page Change
ꕯ Exit
P9
3
4
� Mark
5
MOV, MKV, DivX, AVI, Motion JPEG (AVI,
MP4, MKV), ASF, WMV, FLV
yyResolution:
under 1920 pixel (width) x 1080 pixel (height)
yyFrame Rate:
under 30 frame/sec (1920 x 1080), under 60
frame/sec (1280 x 720)
yyMax bitrate of playable movie file: 20 Mbps
(Mega bit per second)
yyBit rate of audio format: within 32 kbps to
320 kbps (MP3)
yySupported subtitle format: *.smi, *.srt, *.sub
(MicroDVD, SubViewer 1.0/2.0), *.ass, *ssa,
*txt (TMPlayer), *.psb (PowerDivX)
ENG
ENGLISH
1
Description
1
52
ENTERTAINMENT
Type
Supported File Formats
Photo yyJPG
yyAvailable size
Baseline: 64 pixel (W) x 64 pixel (H) - 15360
pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) 1920 pixel (W) x 1440 pixel (H)
* Do not use the progressive option when
saving JPG files on your PC.
yyIt may take some time to open highresolution images in full screen.
For 3D TV
File
Item
Extensions
2D jpeg
jpg
jpe
Profile
Supproted yySOF0:
file format
baseline
yySOF1: Extend
Sequential
yySOF2:
Progressive
Photo size yyMin: 64 x 64
yyMax - Normal
Type: 15360
(W) x 8640 (H)
yyProgressive
Type: 1920
(W) x 1440 (H)
ENGLISH
ENG
3D mpo
Supproted yympo
file format
Photo size yy4:3 size: 3,648
x 2,736
2,592 x 1,944
2,048 x 1,536
yy3:2 size: 3,648
x 2,432
Music yyMP3
yyBit rate range 32 Kbps - 320 Kbps
yySampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz,
24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz,
12 kHz
* A copy-protected file will not play.
ENTERTAINMENT
Viewing Videos
53
NOTE
Your TV can display video files from a USB storage
device.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
: Abnormal files are displayed using this
yy
graphic.
yy : Non-supported files are displayed using
this graphic.
7 Control playback by using the following
buttons.
3 Press the Navigation buttons to scroll to Movie
List and press ENTER.
4 Select Drive1 to access the connected USB
storage device.
5 Press the Navigation buttons to scroll to a
folder/file you want and press ENTER.
6 Play a movie by using the following menus/
buttons.
��
�
�
�
�
�
�
� Option
� Hide
ꕯ Exit
Page 1/1
Movie List
Drive1
USB 1 XTICK
M1
Page 1/1
M2
M3
M4
� Move
ꔅ To Photo List
ꔅ Change Numbers
� Play
� Page Change � Mark
ꔅ Mark Mode
Button
ꕗ
ꕖ
Plays a video.
ꕘ
Pauses or resumes the playback.
ꕚ
Scans backward in a file.
ꕙ
Scans forward in a file.
ꕘ and ꕙ
ꕯ Exit
Page 1/1
Movie List
Mark Mode
Drive1
USB 1 XTICK
M1
Page 1/1
M2
M3
< or >
M4
Butterfly_...
01:34:33
M5
� Move
ꔅ Mark All
ꔅ Unmark All
� Mark
� Page Change � Mark
ꔅ Exit Mark Mode
ꕯ Exit
Button
Description
Navigation
button
Scrolls through the files.
ENTER
Plays the highlighted file or enters
the mark mode.
CH (^, v)
Moves to the previous or next
page.
MARK
Enters the mark mode.
Menu
Description
Play Marked
Plays the selected video.
Mark All
Selects all files.
Unmark All
Clears all of your selections.
Exit Mark
Mode
Exit the Mark Mode.
Description
Stops the playback.
Plays videos in slow motion.
Skips to specific points in a file
during playback. The time of a
specific point will appear on the
status bar. In some files, this
function may not work properly.
ENERGY
SAVING
Increases or deceases the
brightness of your screen.
Q.MENU
Shows the Option menu (See p.54).
AV MODE
Selects the desired source.
BACK
Hides the menu on screen.
To see the menu again, press
ENTER button to display.
EXIT
Returns to TV viewing.
Tips for playing video files
Some user-created subtitles may not work
yy
properly.
Subtitles may not display some special
yy
characters or HTML tags.
Subtitles in the non-supported languages are
yy
unavailable.
The time information in an external subtitle
yy
file should be arranged in ascending order to
play.
ENG
ENGLISH
Butterfly_...
01:34:33
M5
ꔅ Play Marked
01:02:30 / 02:30:25
�
54
ENTERTAINMENT
ENGLISH
ENG
The screen may suffer from temporary
yy
interruptions such as image stoppage or
faster playback when you change the audio
language.
If you play a damaged video file, the video
yy
file may not be played correctly or some
player functions may not be unavailable.
The TV may not properly play the video files
yy
produced with certain encoders.
If the recorded file does not have video or
yy
audio, either video or audio is not outputted
If the TV plays the recorded file without
yy
video or audio, either video or audio is not
outputted.
The TV may not smoothly play the video files
yy
with a resolution higher than the supported
resolution for each frame.
The TV may not properly play the video
yy
files not included on the specified type and
format.
The TV may not play the files encoded with
yy
GMC (Global Motion Compensation) or
quarter-pel motion estimation.
The TV supports the only files saved in ASCII
yy
code in subtitles.
The maximum number of characters
yy
displayed on each subtitle line is 250
(Korean), 500 (English), and 500 (Numbers).
The TV supports the only 10,000 sync blocks
yy
within the subtitle file.
The TV supports the H.264 codec up to the
yy
profile level 4.1.
The TV does not support DTS audio codec.
yy
The TV cannot play a video file whose size is
yy
larger than 30 GB.
If you play a video file through the USB
yy
connection that does not support the high
speed, the video player may not work
properly.
The TV supports a USB storage device
yy
whose version is lower than 2.0. However,
the USB storage device may not work
properly in the movie list.
The video file and its subtitle should be in
yy
the same folder and the name of the video
file and subtitle should be identical.
You can adjust the image by using ENERGY
yy
SAVING and AV MODE. But you cannot
customize image options of each mode.
The TV may not play the video files in the
yy
supported file format depending on the
encoded condition.
The TV will not play the video files that has a
yy
damaged index or no index.
Q.MENU options for movie list
1 Press Q. MENU.
A pop-up window will appear.
2 Press the Navigation buttons to scroll to movie
list option and press ENTER.
3 Press the Navigation buttons to scroll to one of
the following options and press ENTER.
Set Video Play.
Option
Description
Picture Size
Selects your desired picture format
for videos.
yyFull Mode: Files are played in full
screen mode according to the
aspect ratio of video.
yyOriginal Mode: Files are played in
their native size.
Audio
Language
Changes the Language Group of
the audio for video files. Files with
a single audio track cannot be
selected.
Subtitle
Language
The subtitles can be turned on or
off.
Language
Activated for SMI subtitles and
can select the language within the
subtitle.
Subtitle font selection. When set
to default, contents are displayed
in the language set in "Option Language - Menu Language."
Code Page
Subtitle
Language Group
Supported
Language
Latin1
English, Spanish,
French
Korean
English, Korean
Sync
If the video is not synchronized
with the captions, it can be adjusted
by 0.5 second.
Position
Move the location of the subtitles.
Size
Changes the subtitle font size.
Repeat
Turn on/off repeat function of movie
playback. When turned on, the
file within the folder will be played
back repeatedly. When turned off,
if the next file name is similar to
the previous file, it can be played
sequentially.
ENTERTAINMENT
55
NOTE
When replaying a video file after stopping,
yy
select “Yes” to restart where it previously
stopped.
If continuous series files exist within the
yy
folder, the next file will automatically be
played. But, this excludes cases when the
Repeat function of Movie List Option is
turned “On” (See p.54) or when set as Play
Marked.
Set Video.
Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.63).
Set Audio.
Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67).
ENG
ENGLISH
56
ENTERTAINMENT
DivX registration code
Registering the DivX code
The DivX registration code allows you to rent or
purchase the latest movies at www.divx.com/vod.
To play a rented or purchased DivX file, the file’s
registration code should be same as your TV’s
DivX registration code.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
VOD Registration and press ENTER.
5 View the registration code of your TV.
i
You must register your device to
play DivX protected videos.
Registration code : xxxxxxxxxx
Register at http://vod.divx.com
ENGLISH
ENG
Close
6 When you are finished, press ENTER.
NOTE
While you are checking the registration code,
yy
some buttons may not work.
If you use the DivX registration code of
yy
another device, you cannot play the rented
or purchased DivX file. Make sure to use the
DivX registration code assigned to your TV.
The video or audio files that are not
yy
converted by the standard DivX codec may
be corrupted or not be played.
The DivX VOD code allows you to activate
yy
up to 6 devices under one account.
Deactivating the DivX feature
You can deactivate all of the devices through the
web server and block devices from activating.
Delete the existing authentication information to
receive a new DivX user authentication for the
TV. Once this function is executed, a DivX user
authentication is required again to see DivX DRM
files.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
Deregistration and press ENTER.
5 Select Yes to confirm.
i
Deregistration code:
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENTERTAINMENT
Viewing Photos
57
NOTE
You can view image files saved on a USB storage
device. The displays on the screen may differ
based on the model.
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
3 Press the Navigation buttons to scroll to Photo
yy : Abnormal files are displayed using this
graphic.
yy : Non-supported files are displayed using
this graphic.
7 The following options are available while
viewing photos.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
List and press ENTER.
4 Select Drive1 to access the connected USB
◀
▶
storage device.
5 Press the Navigation buttons to scroll to a
folder/file you want and press ENTER.
6 View photos by using the following menus/
buttons.
USB 1 XTICK
Page 1/1
Drive1
P2
P3
P4
P5
P6
P10
P11
P12
P13
P14
P15
� Move
ꔅ To Music List
ꔅ Change Numbers
P7
P8
� View
� Page Change
� Mark
ꕯ Exit
P1
P2
P3
P4
P5
P6
P10
P11
P12
P13
P14
P15
� Move
� Mark
ꔅ Unmark All
P7
P8
▶
� Option
� Hide
ꕯ Exit
Description
Slideshow
BGM
(Background
Music)
NOTE
yyYou can't change or set-up
the BGM while viewing the
*.mpo files (3D camera file).
P9
Rotates photos clockwise (90°,
180°, 270°, 360°).
� Page Change
ꔅ Exit Mark Mode
NOTE
� Mark
ꕯ Exit
꘤ (Rotate)
Description
Navigation
button
Scrolls the file.
ENTER
Views the highlighted file or enters
the mark mode.
CH (^, v)
Moves to the previous or next
page.
MARK
Enters the mark mode.
Menu
�
yyStarts or stops a slideshow with
selected photos.
yyIf there are no selected photos,
all photos saved in the current
folder display during a slideshow.
yyTo set a slideshow speed, select
Option.
Page 1/1
Drive1
ꔅ Mark All
2/13
yyTurns the background music on
or off. To set the background
music folder, select Option.
ꔅ Mark Mode
Photo List
�
Option
P9
Page 1/1
Mark Mode
USB 1 XTICK
�
Description
View Marked Views the selected photo.
Mark All
Selects all files
Unmark All
Clears all of your selections.
Exit Mark
Mode
Exits the Mark Mode.
ꔦ
(Zoom In)
ꕊ
(ENERGY
SAVING)
Option
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than
the supported resolution size.
Views the photo by zoom in 2, 4
times by using Blue button.
Increases or decreases the
brightness of your screen.
Shows the Option menu (See p.58).
Hide
Hides the option window.
To display the options, press
ENTER.
Exit
Moves to the previous menu
screen.
ENG
ENGLISH
P1
Button
BGM �
Page 1/1
Photo List
ꔅ View Marked
◀
Slideshow �
58
ENTERTAINMENT
NOTE
Option values changed in Photo List do not
yy
affect Movie List and Music List.
Option values changed in Photo List or
yy
Music List are changed likewise in Photo List
and Music List, but not Movie List.
Q.MENU options for photo list
1 Press Q. MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to photo
list option and press ENTER.
3 Press the Navigation buttons to scroll to one of
the following options and press ENTER.
Set Photo View.
Option
Slide Speed
Description
Selects a slideshow speed (Fast,
Medium, Slow).
ENGLISH
ENG
Selects a music folder for the
background music.
yyRepeat
yyRandom
BGM
NOTE
yyYou cannot change the music
folder while the background
music is playing.
Set Video.
Allows you to change Video presets. (Refer to
"PICTURE Settings" on p.63).
Set Audio.
Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67).
ENTERTAINMENT
Listening to music
NOTE
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press ENTER.
3 Press the Navigation buttons to scroll to Music
List and press ENTER.
4 Select Drive1 to access the connected USB
storage device.
5 Press the Navigation buttons to scroll to a
folder/file you want and press ENTER.
6 Play music by using the following menus/
buttons.
Page 1/1
Music List
USB 1 XTICK
Drive1
001. - B01 .mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
7 Control playback by using the following
buttons.
Button
ꕗ
ꔅ Change Numbers
� Play
� Page Change
ꔅ Mark Mode
� Mark
ꕖ
Plays a music file.
ꕘ
Pauses or resumes playback.
ꕚ
Skips to the previous file.
ꕙ
Skips to the next file.
Play with
Photo
ꕊ
(ENERGY
SAVING)
Music List
Mark Mode
USB 1 XTICK
Drive1
001. - B01 .mp3
00:00
002. -B02.mp3
00:00
Page 1/1
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
� Move
ꔅ Mark All
ꔅ Unmark All
� Mark
� Page Change
ꔅ Exit Mark Mode
� Mark
ꕯ Exit
Button
Description
Navigation
button
Scrolls through the files.
ENTER
Plays the highlighted file or enters
the mark mode.
CH (^, v)
Moves to the previous or next
page.
MARK
Enters the mark mode.
Menu
Description
Play Marked
Plays the selected music file.
Mark All
Selects all files.
Unmark All
Clears all of your selections.
Exit Mark
Mode
Exits the Mark Mode.
Displays photos during playback.
Increases or deceases the
brightness of your screen.
Shows the Option menu (See p.60).
Hide
Hides the option window.
To display the options, press
ENTER.
Exit
Moves to the previous menu
screen.
ꕯ Exit
Page 1/1
Description
Stops playback.
ENG
ENGLISH
ꔅ To Movie List
ꔅ Play Marked
yy : Abnormal files are displayed using this
graphic.
yy : Non-supported files are displayed using
this graphic.
Option
� Move
59
60
ENTERTAINMENT
Q.MENU options for music list
1 Press Q. MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to music
list option and press ENTER.
3 Press the Navigation buttons to scroll to one of
the following options and press ENTER.
NOTE
Option values changed in Movie List does
yy
not affect the Photo List and Music List.
Option value changed in Photo List and
yy
Music List are changed likewise in Photo List
and Music List.
Set Audio Play.
Select Repeat or Random option.
Set Audio.
ENGLISH
ENG
Allows you to change Audio presets. (Refer to
"AUDIO Settings" on p.67).
NOTE
The TV will not play copy protected files.
yy
If the TV is not in use for some time
yy
during playback, the information box as a
screensaver will appear to prevent image
burn.
To return to the Music list screen, press
ENTER or BACK.
File name
002. B02.mp3
� 00:31 / 04:04
Time elapsed /Duration
CUSTOMIZING SETTINGS
61
CUSTOMIZING TV SETTINGS
The Main Menus
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press ENTER.
3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
4 When you are finished, press EXIT.
PICTURE (See p.63)
Adjusts the image size,
quality, or effect.
CHANNEL (See p.62)
Sets up and edit
channels.
PICTURE
AUDIO
TIME
TIME (See p.68)
Sets the time, date,
or Timer feature.
MY MEDIA (See p.50)
LOCK
OPTION
OPTION (See p.71)
Customizes
the general settings.
INPUT
MY MEDIA
INPUT (See p.43)
Views the input sources
with their labels.
ENG
ENGLISH
LOCK (See p.69)
Locks or unlocks
channels and programs.
CHANNEL
AUDIO (See p.67)
Adjusts the sound quality,
effect, or volume level.
62
CUSTOMIZING SETTINGS
Customizing Settings
CHANNEL Settings
1 Press Home to access the main menus.
CHANNEL
2 Press the Navigation buttons to scroll to CHANNEL and press
ENTER.
• Auto Tuning
• Manual Tuning
• Channel Edit
3 Press the Navigation buttons to scroll to the setting or option you
want and press ENTER.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
The available channel settings are described in the following.
Setting
Description
Auto Tuning
Tunes and stores all available channels through antennas or cable inputs (See p.38).
Manual Tuning
Tunes and stores the channels you want manually (See p.38).
Channel Edit
Adds or deletes channels on the channel (See p.39).
ꔂ Move
ꔉ Enter
ENGLISH
ENG
CUSTOMIZING SETTINGS
63
PICTURE Settings
1 Press Home to access the main menus.
PICTURE
2 Press the Navigation buttons to scroll to CHANNEL and press
• Aspect Ratio
ENTER.
ꔂ Move
ꔉ Enter
: 16:9
• Picture Wizard
•ꕊ Energy Saving : Off
3 Press the Navigation buttons to scroll to the setting or option you
want and press ENTER.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
• Picture Reset
• TruMotion
: Low
• Screen (RGB-PC)
The available picture settings are described in the following.
Setting
Description
Aspect Ratio
Changes the image size to view images at its optimal size (See p.42).
Picture Wizard
Adjusts the image quality and calibrates the screen.
The customized options will be saved as Expert1 in the Picture Mode.
NOTE
Energy Saving
Reduces the power consumption by adjusting the screen brightness.
NOTE
yyWhen selecting Auto or Maximum, Backlight will not work.
Option
Auto (
LCD
)
The backlight is adjusted automatically corresponding to the surroundings
when selecting Auto using the Intelligent sensor feature.
Intelligent sensor
(
)
The most suitable picture is automatically adjusted according to the surrounding
conditions.
Off
Select if this feature is not necessary.
Plasma
Minimum/
Selects the brightness level.
Medium/Maximum
Screen off
The screen turns off in 3 seconds.
Pressing any button of the remote control will turn on the screen again.
ENG
ENGLISH
yyIf you use Picture Wizard, the Energy saving feature will turn off automatically.
yyTo reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is on
Expert1.
64
CUSTOMIZING SETTINGS
Setting
Picture Mode
Description
Selects one of the preset image or customizes options in each mode for the best TV screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the TV.
Mode
Intelligent Sensor
( LCD )
Sets the TV to adjust the image settings, such as contrast, brightness,
sharpness, color, or tint, automatically corresponding to the surrounding
environments.
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for the normal environment.
APS (
Plasma
Maximizes video images reducing power consumption without hurting picture
quality.
)
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in
a movie theater.
Sport
Optimizes video images for high and dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Expert
Adjusts the detailed video image settings for video experts as well as general
viewers.
NOTE
ENGLISH
ENG
yyIf you select Intelligent Senesor, the option of the Energy saving feature will switch to Auto
automatically ( LCD ).
TruMotion
(Depending on
model)
Advance video technology that provides clearer, smoother images, even during fast action scenes
creating a more stable structure for a crisper picture.
TruMotion works with all inputs except PC mode.
If you enable “TruMotion”, noise may appear on the screen. If this occurs, set “TruMotion” to “Off”.
If you select "Picture Mode-Game", set "TruMotion" to "Off".
Option
High
Provides smoother picture movement.
Low
Provides smooth picture movement. Use this setting for standard use.
Off
Turn off TruMotion operation.
User
De-Judder Adjusts noise of the screen.
De-Blur
SCREEN (RGBPC)
Adjusts after-image of the screen.
Customizes the PC display options.
Option
Resolution
Selects a proper resolution when your PC uses 1024 X 768, 1280 X 768, or
1360 X 768 resolution.
Auto Configure
Sets the TV to optimize the options automatically for the TV display.
Position
Locates the image at the proper position.
Size
Adjusts the image size.
Phase
Eliminates horizontal streaking.
Reset
Restores the options to the default setting.
CUSTOMIZING SETTINGS
65
Basic Image Options
Setting
Backlight (
LCD
)
Description
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
NOTE
yyIf you use the “Energy saving - Off, Minimum, Medium”, Backlight will be available.
Contrast
Increases or decreases the amplitude of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Sets to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors
such as blue.
Advanced Control
Customizes the advanced options.
Picture Reset
Restores the options of each mode to the factory default.
Setting
Description
Dynamic Contrast
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Color
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue,
saturation and luminance so that red, blue and green white look more vivid.
Skin Color
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
Reduces screen noise without compromising video quality.
Digital Noise Reduction Removes noise caused by compressing video.
Gamma
You can adjust brightness of dark area and middle gray level area of the picture.
»»Low: Make the dark and middle gray level areas brighter.
»»Medium: Express the original picture level.
»»High: Make the dark and middle gray level area darker.
Black Level
Sets black level of the screen to proper level.
»»Low: The reflection of the screen gets darker.
»»High: The reflection of the screen gets brighter.
Clear White
Makes the white area of screen brighter and more white.
Eye Care
Adjusts the brightness of the screen to prevent the screen from being too bright. Dims
extremely bright pictures.
This feature is enabled in “Picture Mode-Standard, Sport, Game”.
Real Cinema or Film
Mode
Makes video clips recorded in film look more natural by eliminating judder effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema,
every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with
TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally
eliminating the judder effect.
This function can also work when TruMotion is off.
ENG
ENGLISH
Advanced Image Options (Depending on model)
66
CUSTOMIZING SETTINGS
Setting
Color Gamut
Description
Advanced Control
Maximizess the utilization of color to increase color quality.
»»Standard: Displays standard set of colors.
»»Wide: Increase number of colors used.
Expert Control
Displays color domain of the signal.
»»Standard: Displays standard set of colors.
»»Wide: Increase number of colors used.
»»EBU: Mode to display EBU standard color area. ( LCD )
»»SMPTE: Mode to display SMPTE standard color area. ( LCD )
»»BT709: Mode to display BT709 standard color area. ( LCD )
Edge Enhancer
Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC
This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in “Picture mode - Cinema, Expert” when xvYCC signal is inputted
through HDMI.
Color Filter
This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Expert Pattern
This is the pattern used for expert adjustment.
This function is enabled in “Picture Mode - Expert” when you watch DTV.
Color Temperature
Adjusts the overall color of the screen by changing the white baseline.
Plasma
ENGLISH
ENG
LCD
Color Management
System
a. Gamma : Select
Low, Medium, High
b. Method : 2 Points
yyPattern: Inner,
Outer
yyRed/Green/
Blue Contrast,
Red/Green/Blue
Brightness
d. Apply to all inputs
c. Method : 20 Point IRE
yyIRE (Institute of Radio Engineers) is the
unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100
Plasma TV. You can adjust Red, Green or
Blue according to each setting.
yyRed/Green/Blue: The adjustment range is
-50 - +50.
c. Method : 10 Point IRE
yyPattern: Inner, Outer
yyIRE (Institute of Radio Engineers) is the unit
to display the size of the video signal and
can be set among 0, 10, 20, 30 - 100. You
can adjust Red, Green or Blue according to
each setting.
yyLuminance: This function displays
calculated luminance value for 2.2 gamma.
You can input luminance value you want at
100 IRE, than the target luminance value
for 2.2 gamma is displayed at every 10
steps from 10 IRE to 90 IRE.
yyRed/Green/Blue: The adjustment range is
-50 - +50.
As the tool used by the experts to make adjustments by using the test patterns, this does
not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/
Blue/Cyan/Magenta/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
67
CUSTOMIZING SETTINGS
AUDIO Settings
1 Press Home to access the main menus.
AUDIO
ꔂ Move
2 Press the Navigation buttons to scroll to AUDIO and press ENTER.
• Auto Volume
: Off
• Clear Voice II
: Off � 3
3 Press the Navigation buttons to scroll to the setting or option you
• Balance
want and press ENTER.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
0
• Sound Mode
: Standard
• Infinite Surround:Off
• Treble
50
• Bass
50
• Reset
• TV Speaker
: On
ꔉ Enter
L
R
The available audio settings are described in the following.
Setting
Description
Auto Volume
Activates the Auto Volume feature to keep the volume level consistent whenever you change
channels. The volume level may not be consistent due to different signal conditions of broadcasting
stations.
Clear Voice II
Sets whether to enhance human voice clarity. You can adjust the level of clarity when you set this
feature on.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Selects one of the preset sound modes or customizes options in each mode.
Mode
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sports events.
Game
Select when you play games.
NOTE
yyIf sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
yyIf the Clear Voice II feature is on, Infinite Surround will not be activated.
Option
TV Speaker
Infinite Surround
Infinite Surround is a patented LG proprietary sound processing technology that
strives immersive 5.1 surround sound with just two front speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it will
increase the output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will
increase the output to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Turns on the internal speaker of the TV when using an external Hi-Fi system. You can use the TV
speaker as an audio output device even if there is no video input.
ENG
ENGLISH
Standard
68
CUSTOMIZING SETTINGS
TIME Settings
1 Press Home to access the main menus.
TIME
ꔂ Move
2 Press the Navigation buttons to scroll to TIME and press ENTER.
• Clock
• Off Time
: Off
3 Press the Navigation buttons to scroll to the setting or option you
• On TIme
: Off
• Sleep Timer
: Off
want and press ENTER.
-To return to the previous level, press BACK.
ꔉ Enter
4 When you are finished, press EXIT.
The available time settings are described in the following
Setting
Clock
Description
Sets the time, date, time zone, and daylight-saving time feature.
The time will be set automatically according to a digital channel signal which includes time
information provided by the broadcasting station. If not, set the time and date manually.
Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should set the current
time and date in advance.
NOTE
ENGLISH
ENG
yyIf you do not press any button within 2 hours after the TV turns on by the On Time feature,
the TV enters the Standby mode automatically.
yyIf you set both Off time and On time features to the same time, the Off time feature
overrides the On time feature.
Sleep Timer
.
Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the
Sleep timer faature will be set to off.
69
CUSTOMIZING SETTINGS
LOCK Settings
1 Press Home to access the main menus.
LOCK
ꔂ Move
2 Press the Navigation buttons to scroll to LOCK and press ENTER.
• Set Password
3 Press the Navigation buttons to scroll to the setting or option you
• Lock System
: On
• Block Channel
• Movie Rating
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
want and press ENTER.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
• Input Block
• Key Lock
: Off
ꔉ Enter
The available lock settings are described in the following.
Setting
Description
Lock System
Activates or deactivates the lock system.
Set Password
Changes the 4-digit password. The default PIN is “0 0 0 0”.
If you forget your password, press “0-3-2-5” on the remote control.
Block Channel
Blocks the channels that contain inappropriate contents for children by pressing the Yellow button.
The Lock icon appears in front of the blocked channels. The channels can be selected but the screen
blank and the audio is muted.
To watch a locked channel, enter the password.
Movie Rating
Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on
the Motion Picture Association of America (MPAA) rating.
TV RatingChildren
(Depending on
model)
G
General audiences – All ages admitted
PG
Parental guidance suggested – Some material may not be suitable for children
PG-13
Patents strongly cautioned – Some material may be inappropriate for children
under 13
R
Restricted – Under 17 requires accompanying parent or adult guardian
NC-17
No one 17 and under admitted
X
Adults only
Blocking Off
Permits all programs
Blocks the children’s TV programs that parents do not want their children to watch. To block other
TV programs, you should set the TV Rating-General feature.
Rating
Age
TV-Y (All children, including children from ages 2-6)
TV-Y7 (Directed to older children, suitable for children age 6 and above)
Fantasy Violence
TY-Y7 (Directed to older children – Fantasy violence, suitable for children age 6
and above, containing more intense or combative fantasy violence)
ENG
ENGLISH
Rating
70
CUSTOMIZING SETTINGS
Setting
TV RatingGeneral
(Depending on
model)
Description
Blocks the TV programs that you want based on the ratings by using the Parental Control Function
(V-Chip).
NOTE
yyThe V-Chip electronically reads TV program ratings and allows parents to block program that
are unsuitable for children.
Rating
Age
TV-G (General audience, suitable for all ages)
TV-PG (Parental guidance suggested, containing material that are unsuitable for
younger children)
TV-14 (Parents strongly cautioned, containing material that are unsuitable for
children age 14 and under)
TV-MA (Mature audience only, unsuitable for children age under 17)
Dialog
(suggestive
dialogue)
TV-PG or TV-14
Language
TV-PG, TV-14, or TV-MA
(coarse language)
ENGLISH
ENG
TV RatingEnglish
(Depending on
model)
TV RatingFrench
(Depending on
model)
Downloadable
Rating
Sex
(sexual situation)
TV-PG, TV-14, or TV-MA
Violence
TV-PG, TV-14, or TV-MA
Selecting Canadian English rating system.
Rating
E
Exempt
C
Children
C8+
Children eight years and older
G
General programming, suitable for all audiences
PG
Parental Guidance
14+
Viewers 14 years and older
18+
Adult programming
Blocking Off
Permits all programs
Selecting Canadian French rating system.
Rating
E
Exempt
G
General
8ans+
General-Not convenient for little children
13ans+
Not convenient for children of 13 years and younger
16ans+
Not convenient for children of 16 years and younger
18ans+
This programs is only for adults
Blocking Off
Permits all programs
This function operates only when TV has received Region5 Rating data.
The name of the rating option may differ.
NOTE
yyThis feature is available only for digital channels.
Input Block
Blocks the input sources.
Key Lock
Locks or unlocks the buttons on the TV.
71
CUSTOMIZING SETTINGS
OPTION Settings
1 Press Home to access the main menus.
OPTION
ꔂ Move
2 Press the Navigation buttons to scroll to OPTION and press ENTER.
• Language
• Caption
: Off
3 Press the Navigation buttons to scroll to the setting or option you
• ISM Method
: Normal
want and press ENTER.
-To return to the previous level, press BACK.
ꔉ Enter
• Power Indicator
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
4 When you are finished, press EXIT.
The available general settings are described in the following.
Setting
Language
Description
Selects a desired language.
Option
Caption
Menu Language
Selects a language for the display text.
Audio Language
Selects an audio language for your program. This feature operates only
in the DTV or CADTV mode.
Sets whether to display captions and customize your option in each mode.
Mode
Text 1-4
Displays the audio portion of a TV program as text on the TV screen.
CC1 is the most common mode in use.
- Field 1 data channels: two Captions (CC1, CC2) and two Text (T1, T2).
- Field 2 data channels: two Captions (CC3, CC4) and two Text (T1, T2).
Service 1-6
This is only available for the digital broadcasting system.
Option (For DTV, CADTV)
Size
Selects the word size.
Font
Selects a typeface for the text.
Text Color
Selects a color for the text.
Text Opacity
Adjusts the opacity for the text color.
Bg Color
Selects a background color.
Bg Opacity
Adjusts the opacity for the background color.
Edge Type
Selects an edge type.
Edge Color
Selects a color for the edges.
Power Indicator Sets to turn on or off the indicator light on the TV.
(LED LCD TV)
Option
Standby Light
Sets to turn on or off the indicator light in Standby mode.
Power Light
Sets to turn on or off the indicator light when you turn on the power.
ENG
ENGLISH
C 1-4 (Closed
C
Captioning)
72
CUSTOMIZING SETTINGS
Setting
ISM Method
(
)
Plasma
Description
Prevents image sticking or removes a ghost image.
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image.
Mode
Normal
Sets it if image sticking is never a problem.
Orbiter
Avoids a ghost image on the screen.
The image will move every 2 minutes to help prevent ghost images.
However, it is best not to allow any fixed image to remain on the screen.
Color Wash
Removes a ghost image on the screen.
The color block with the screen moved a little and the white pattern are
alternately displayed. It is difficult to see the after image on all colors.
Once it has been corrected it will not be visible in any color.
White Wash
Removes a ghost image on the screen.
Use sparingly. Watch the TV normally for a while before using this
feature to see if the ghost image disappears on its own.
NOTE
yyAn excessive ghosted image may be impossible to clear entirely
with White Wash. To return to normal viewing, press the any
button.
Initial Setting
Resets the TV to factory default and erases all stored channels.
Customizes the TV settings to suit your preference. The initial setup screen will appear when you
turn on the TV for the first time.
ENGLISH
ENG
NOTE
yyWhen selecting “Lock System - On”in the LOCK menu, the message to enter the password
appears.
yyIf you forget your password, press “0-3-2-5” on the remote control.
Setting
Language
Selects a desired language.
Mode Setting
Selects Home Use for the home environment.
Selects Store Demo for the retail environment.
Selects Demo Mode to set to show special features of the TV. You can
cancel the demo mode by pressing any buttons except the Volume and
Mute buttons.
NOTE
yyWhen selecting Store Demo, Demo Mode will be activated.
Power Indicator
(LED LCD TV)
Turns the power indicator light on or off.
Time Zone
Sets the time zone and daylight saving.
Auto Tuning
Scans and saves available channels automatically.
Set ID
Adds an ID to the connected devices.
Mode Setting
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
Option
Home Use
Selects it for the home environment.
Store Demo
Selects it for the retail environment.
Demo Mode
Sets to show special features of the TV. You can cancel the demo mode
by pressing any buttons except the Volume and Mute buttons.
MAKING CONNECTIONS
73
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information of external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
yy
to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual
provided with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
ENG
ENGLISH
74
MAKING CONNECTIONS
Connection Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
Speaker
ENGLISH
ENG
PC
DVD
VCR
USB
Gaming device
HDMI – See p.75
DVI – See p.75
Component – See p.76
Composite – See p.76
Digital – See p.79
RGB – See p.78
Memory storage – See p.79
Memory card reader – See p.79
NOTE
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy
Refer to the external equipment’s manual for operating instructions.
yy
MAKING CONNECTIONS
Connecting to a HD receiver,
DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the
TV and select an appropriate input mode.
DVI to HDMI Connection
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the
following illustration. To transmit an audio signal,
connect an audio cable.
PW350 series
HDMI Connection
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
2
L/MONO
O
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown
in the following illustration.
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
1
REMOTE
CONTROL IN
2
Y
R
PR L
PB
1
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
This part of MAKING CONNECTIONS mainly
yy
uses picture for PW350, LV3500 series.
75
ANTENNA
/CABLE
IN
NOTE
AUDIO OUT
DVI OUT
LV3500 series
PW350 series
OPTICAL
DIGITAL
AUDIO OUT
AUDIO R
COMPONENT IN
COMPONENT IN
RS-232C IN(CONTROL & SERVICE)
2
1
R
/ DVI IN
LAN
ANTENNA /
CABLE IN
AUDIO
ANTENNA
/CABLE
IN
L
1
AUDIO
VIDEO
PR
R
PR L
PB
L/MONO AUDIO R
Y
RS-232C IN
(CONTROL & SERVICE)
RGB IN(PC)
VIDEO
2
PB
AV IN 1
REMOTE
CONTROL IN
IN 3
Y
1
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
H/P
L/MONO
O
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AV IN 2
AV IN 1
VIDEO
2
VIDEO / AUDIO
/DVI IN
ENG
ENGLISH
USB IN
Use the latest High Speed HDMI™ Cable
yy
with CEC (Customer Electronics Control)
function.
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
2
1
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL
AUDIO OUT
HDMI
AUDIO OUT
LV3500 series
DVI OUT
USB IN
LAN
COMPONENT IN
H/P
AV IN 2
AUDIO
VIDEO / AUDIO
ANTENNA /
CABLE IN
L
R
1
PR
2
L/MONO AUDIO R
/ DVI IN
LAN
VIDEO
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
RGB IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
2
1
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
HDMI
76
MAKING CONNECTIONS
Component Connection
Composite Connection
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
device and the TV with the component cable as
shown in the following illustration.
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
device and the TV with the composite cable as
shown in the following illustration.
PW350 series
NOTE
If you have a mono VCR, connect the audio
yy
cable from the VCR to the AUDIO L/MONO
jack of the TV.
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
2
L/MONO
O
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
2
Y
R
PR L
PB
1
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
1
REMOTE
CONTROL IN
PW350 series
ANTENNA
/CABLE
IN
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
2
O
L/MONO
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
R
REMOTE
CONTROL IN
2
Y
VIDEO
R
PR L
PB
AUDIO
1
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
1
L
ANTENNA
/CABLE
IN
ENGLISH
ENG
USB IN
LV3500 series
VIDEO L (MONO) AUDIO R
LV3500 series
COMPONENT IN
USB IN
H/P
AV IN 2
VIDEO / AUDIO
AUDIO
R
1
COMPONENT IN
2
1
2
H/P
AV IN 2
1
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
LAN
R AUDIO L(MONO)
NOTE
VIDEO
USB IN
(For only 32LV2500, 32LV2520, LV3500, LV3520 series)
COMPONENT IN
ANTENNA /
CABLE IN
L
AUDIO
R
1
PR
2
L/MONO AUDIO R
L(MONO)
/ DVI IN
VIDEO
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
RGB IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
H/P
If cables are installed incorrectly, it could
yy
case the image to display in black and white
or with distorted color. Check to ensure the
cable are matched with the corresponding
color connection.
VIDEO / AUDIO
LAN
R
/ DVI IN
AUDIO
L
VIDEO
ANTENNA /
CABLE IN
AUDIO
RS-232C IN(CONTROL & SERVICE)
L/MONO AUDIO R
L(MONO)
R
PR
VIDEO
L
PB
AV IN 1
RGB IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
AV IN 2
2
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
LAN
VIDEO / AUDIO
1
ANTENNA /
CABLE IN
L
2
PR
/ DVI IN
VIDEO L/MONO AUDIO R
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
RGB IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
2
1
VIDEO L (MONO) AUDIO R
MAKING CONNECTIONS
Connecting to a PC
77
DVI to HDMI Connection
NOTE
It is recommended to use the TV set with
yy
the HDMI connection for the best image
quality.
HDMI Connection
Transmits the digital video signal from your PC to
the TV. Connect the PC and the TV with the DVIHDMI cable as shown in the following illustration.
To transmit an audio signal, connect an audio
cable.
PW350 series
Transmits the digital video and audio signals from
your PC to the TV. Connect the PC and the TV
with the HDMI cable as shown in the following
illustration.
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
2
L/MONO
O
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
2
Y
R
PR L
PB
1
PW350 series
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
1
REMOTE
CONTROL IN
ANTENNA
/CABLE
IN
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
AV IN 1
VIDEO
2
L/MONO
O
AUDIO R
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AUDIO OUT
REMOTE
CONTROL IN
2
Y
R
PR L
PB
1
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
1
DVI OUT
ANTENNA
/CABLE
IN
HDMI
LV3500 series
ENG
ENGLISH
USB IN
LV3500 series
COMPONENT IN
H/P
VIDEO / AUDIO
AV IN 2
AUDIO
R
2
1
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL
AUDIO OUT
USB IN
IN 3
1
ANTENNA /
CABLE IN
L
2
PR
H/P
AUDIO
AV IN 2
L
ANTENNA /
CABLE IN
VIDEO / AUDIO
PR
AUDIO OUT
R
1
PB
2
L/MONO AUDIO R
LAN
VIDEO
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
LAN
Y
AV IN 1
RGB IN(PC)
VIDEO
(RGB/DVI)
AUDIO IN
L/MONO AUDIO R
/ DVI IN
COMPONENT IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
RGB IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
2
1
DVI OUT
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
LAN
HDMI
MAKING CONNECTIONS
RGB Connection
NOTE
L/MONO
O
AUDIO R
PZ200 series
Other models
AUDIO IN
(RGB/DVI)
RGB IN (PC)
REMOTE
CONTROL IN
2
Y
R
PR L
PB
1
RS-232C IN
AUDIO
VIDEO
(CONTROL & SERVICE)
COMPONENT IN
1
ANTENNA
/CABLE
IN
RGB OUT (PC) AUDIO OUT
ENGLISH
ENG
USB IN
LV3500 series
COMPONENT IN
H/P
AV IN 2
COMPONENT IN
(RGB/DVI)
AUDIO IN
AV IN 1
AUDIO
R
1
ANTENNA
IN
L
2
PR
/ DVI IN
RGB OUT (PC) AUDIO OUT
L(MONO) AUDIO R
RS-232C IN(CONTROL & SERVICE)
VIDEO
RGB IN(PC)
PB
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
R
1
Depending on the graphics card, DOS mode
yy
may not work if a HDMI to DVI Cable is in
use.
In PC mode, there may be noise associated
yy
with the resolution, vertical pattern, contrast
or brightness.
If noise is present, change the PC output to
yy
another resolution, change the refresh rate
to another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
Avoid keeping a fixed image on the screen
yy
for a long period of time. The fixed image
may become permanently imprinted on the
screen.
The synchronization input form for Horizontal
yy
and Vertical frequencies is separate.
Depending on the graphics card, some
yy
resolution settings may not allow the image
to be positioned on the screen properly.
When selecting HDMI-PC, set the “Input
yy
Label - PC” in the INPUT menu.
Y
AUDIO
2
OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/
AUDIO OUT
CABLE IN
VIDEO / AUDIO
ANTENNA /
CABLE IN
L
1
PR
2
L/MONO AUDIO R
/ DVI IN
VIDEO
RS-232C IN(CONTROL & SERVICE)
PB
AV IN 1
RGB IN
(PC)
IN(PC)
IN 3
Y
(RGB/DVI)
AUDIO IN
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
1920x1080
1024x768
USB IN
2
Resolution
Plasma
AV IN 1
VIDEO
2
1
OPTICAL DIGITAL ANTENNA/
AUDIO OUT
CABLE IN
CABLE
IN
IN 3
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
22LV2500, 22LV2520, LV3500,
1920x1080
LV3520, LK430, LK450, LK520 series
Other models
1360x768
H/P
PW350 series
Resolution
LCD
AV IN 2
Transmits the analog video signal from your PC to
the TV. Connect the PC and the TV with the D-sub
15 pin signal cable as shown in the following
illustrations. To transmit an audio signal, connect
an audio cable.
To get the best picture quality, adjust the PC
yy
graphics card to
AUDIO / VIDEO
78
MAKING CONNECTIONS
Connecting to an Audio
System
79
Connecting to a USB
Connect a USB storage device such as a USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the
My media menu to use various multimedia files.
See "Connecting USB storage devices" on p.50 and
"Browsing files" on p. 51.
Use an optional external audio system instead of
the built-in speaker.
NOTE
IN 3 USB IN
If you use an optional external audio device
yy
instead of the built-in speaker, set the TV
speaker feature to off (See p.67).
Digital optical audio connection
Transmits the digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown in
the following illustration.
or
PW350 series
USB IN
LCD
A
VIDEO L/MONO AUDIO
R
Connecting to a Headphone
( )
Listen to the sound through a headphone.
OPTICAL
DIGITAL
AUDIO OUT
AUDIO R
AV IN 1
ANTENNA /
CABLE IN
L
R
1
PR
2
AV IN 2
AUDIO
/ DVI IN
L/MONO AUDIO R
L(MONO)
RS-232C IN(CONTROL & SERVICE)
VIDEO
RGB IN(PC)
H/P
(RGB/DVI)
AUDIO IN
PB
AUDIO
VIDEO
OPTICAL
ANTENNA
DIGITAL
/CABLE
AUDIO OUT
IN
VIDEO
1
RS-232C IN
(CONTROL & SERVICE)
Y
R
PR L
PB
COMPONENT IN
COMPONENT IN
2
Y
2
1
OPTICAL AUDIO IN
LV3500 series
USB IN
NOTE
COMPONENT IN
H/P
AUDIO
R
2
1
OPTICAL AUDIO IN
AV IN 2
L
ANTENNA /
CABLE IN
VIDEO / AUDIO
PR
1
L/MONO AUDIO R
2
VIDEO
RS-232C IN(CONTROL & SERVICE)
/ DVI IN
PB
AV IN 1
RGB IN(PC)
VIDEO
(RGB/DVI)
AUDIO IN
IN 3
Y
OPTICAL
DIGITAL
AUDIO OUT
AUDIO menu options are disabled when
yy
connecting a headphone.
When changing AV MODE with a headphone
yy
connected, the change is applied to video
but not to audio.
Optical Digital Audio Out is not available
yy
when connecting a headphone.
Headphone impedance: 16 Ω
yy
Max audio output: 10 mW to 15 mW
yy
Headphone jack size: 0.35 cm (0.13 inches)
yy
ENG
ENGLISH
1
REMOTE
CONTROL IN
IN 3
L/MONO
O
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AV IN 2
AV IN 1
VIDEO
2
VIDEO / AUDIO
/DVI IN
80
MAKING CONNECTIONS
SIMPLINK Connection
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC. But only devices with the
logo are fully supported.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
NOTE
If the connected device does not support
yy
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, you should use
yy
an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
SIMPLINK may not work properly if you a
yy
third-party device that has an HDMI-CEC
function.
ENGLISH
ENG
Activating and Using the
SIMPLINK menus
1 Press SIMPLINK to access the SIMPLINK
menus.
2 Press the Navigation buttons to select to On.
3 Press the Navigation buttons to scroll to one of
the devices and press ENTER.
ꔉ Enter ꕉ Exit
◀
On
Watch TV
No.
1
2
3
4
5
Description
Displays the previously viewed TV channel.
Plays discs. When multiple discs are
available, the title of the disc appears at the
bottom of the screen.
Controls the connected VCR.
HDD recordings playback: Controls the
recording stored in HDD.
Audio out to home theater speaker or Audio
out to TV: Changes the audio output between
Home theater speaker and TV speaker.
- A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
4 Control the selected AV device.
- Direct Play: After connecting AV devices to
the TV, you can directly control the devices
and play media without additional settings.
- Select AV device: Enables you to select one
of the AV devices connected to the TV.
- Disc playback: Control connected AV devices
by pressing the Navigation buttons, ENTER,
ꕖ, ꕗ, ꕘ, ꕚ and ꕙ.
- Power off all devices: When you power off
the TV, all connected devices are turned off.
- Switch audio-out: Offers an easy way to
switch audio-out.
- Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, The TV will automatically turn
on.
NOTE
▶
DISC
1
2
VCR
3
HDD Recorder
4
Speaker
5
If you change the input source by pressing
yy
INPUT, the progressing function of the
SIMPLINK device will stop.
If you select a device that has the
yy
home theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
If a connected SIMPLINK home theater
yy
system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable.
MAINTENANCE
MAINTENANCE
Update and clean your TV regularly to keep the
best performance and to extend the product
lifespan.
Cleaning Your TV
CAUTION
Make sure to turn the power off and
yy
disconnect the power cord and all other
cables first.
When the TV is left unattended and unused
yy
for a long time, disconnect the power cord
from the wall outlet to prevent possible
damage from lightning or power surges.
81
CAUTION
Do not spray liquid onto the surface. If water
yy
enters the TV, it may result in fire, electric
shock, or malfunction.
Do not use any chemicals as this may
yy
deteriorate the surface.
Power cord
Remove the accumulated dust or dirt on the
power cord regularly.
Preventing “Image burn” or
“Burn-in” on your TV screen
Screen and frame
CAUTION
Do not push, rub, or hit the surface with
yy
your fingernail or a sharp object, as this may
result in scratches on the screen and image
distortions.
Do not use any chemicals, such as waxes,
yy
benzene, alcohol, thinners, insecticides,
air fresheners, lubricants, as these may as
these may damage the screen’s finish and
cause discoloration.
Cabinet and stand
To remove dust or light dirt, wipe the cabinet with
a dry, clean, and soft cloth.
To remove major dirt, wipe the cabinet with a
soft cloth dampened in a clean water or water
containing a small amount of mild detergent. Then
wipe immediately with a dry cloth.
If a fixed image displays on the TV screen for
yy
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
yy
long period of time, image burn may occur on
the letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen
yy
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
ENG
ENGLISH
To remove dust or light dirt, wipe the surface with
a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a
soft cloth dampened in clean water or a diluted
mild detergent. Then wipe immediately with a dry
cloth.
82
TROUBLESHOOTING
TROUBLESHOOTING
General
Problem
Resolution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to ).
yyCheck if the batteries are still working and properly installed ( to ,
yyCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV
turns on.
yyThe image is muted during the product startup process. This is normal. If the
image does not appear in a few minutes, unplug the TV for 30 seconds and try
again. If the image still does not appear, contact the authorized service center
in your local area.
Cannot connect external devices.
yyRefer to the "Connection Overview" and connect an external device.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings.
Refer to the "Sleep Timer".
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
ENGLISH
ENG
Audio
Problem
Resolution
No sound is produced while images yyPress VOL + or - button.
are displaying.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the TV Speaker feature is activated in the menu option.
No output from one of the speakers yyAdjust Balance in the menu option.
Unusual sound from inside the TV is yyA change in ambient humidity or temperature may result in an unusual noise
produced.
when the product turns on or off. There is no problem with your product.
TROUBLESHOOTING
83
Video
Problem
Resolution
An image displays in black and
white or the color quality is poor.
yyAdjust the color setting in the menu option.
yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
yyCheck if there are local interferences such as an electrical appliance or power
tool.
Lines or streaks appear on images
yyCheck the antenna or aim the antenna to the proper direction.
Afterimages (ghosts) appear when
the product turns off
yyPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen
appears extremely dark.
yyAdjust the brightness and contrast in the menu option.
“No Signal” appears on the screen. yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the LCD panel.
yyThis is normal.
The display offset is wrong.
yyAdjust the position setting in the Picture menu.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background
of the screen.
yyCheck the video cable connections.
Horizontal noises appear or
characters blur.
yyAdjust the Phase setting in the menu option.
Refer to the “SCREEN (RGB-PC)”.
The reception on some channels is
poor
yyScroll to other channels. There may a problem with the broadcast.
yyThe station signal may be weak. Aim the antenna to the proper direction.
yyCheck if there is local interferences such as an electrical appliance or power
tool.
Movie
Problem
Resolution
The file does not appear on the
Movie List.
yyCheck whether the extension is supported.
Message is displayed
saying “This file is invalid” or the
audio is working normally but the
video is not working normally.
yyCheck whether the file is playing normally on a PC. (Check whether the file is
damaged.)
yyCheck whether the resolution is supported.
yyCheck whether the video/audio codec is supported.
yyCheck whether the frame rate is supported.
Message is displayed saying
“Unsupported Audio” or the video
is working normally but the audio is
not working normally.
yyCheck whether the file is playing normally on a PC. (Check whether the file is
damaged.)
yyCheck whether the audio codec is supported.
yyCheck whether the bit rate is supported.
yyCheck whether the sample rate is supported.
Subtitle is not working.
yyCheck whether the file is playing normally on a PC. (Check whether the file is
damaged.)
yyCheck whether the video file and subtitle file name are the same.
yyCheck whether the video file and subtitle file are located in the same folder.
yyCheck whether the subtitle file is supported.
yyCheck whether the language is supported. (When you open the subtitle file in
Memo Pad, you can check the language of the subtitle file.)
ENG
ENGLISH
Black spots appear on the screen.
84
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
75 Ω
Environment
condition
Operating
Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
MODELS
ENGLISH
ENG
Dimensions
(W x H x D)
Weight
50PW350
(50PW350-UE)
42PW350U
(42PW350U-UC)
50PW350U
(50PW350U-UC)
42PW350R
(42PW350R-MA)
50PW350R
(50PW350R-MA)
Without stand
991.8 mm x 613.8 mm x 52.5 mm 1176.1 mm x 716.5 mm x 52.5 mm
(39.0 inch x 24.1 inch x 2.0 inch)
(46.3 inch x 28.2 inch x 2.0 inch)
With stand
21.5 kg (47.3 lbs)
29.6 kg (65.2 lbs)
Without stand
20.0 kg (44.0 lbs)
27.3 kg (60.1 lbs)
2.3 A / 230 W
3.0 A / 300 W
AC100 - 240 V ~ 50/60 Hz
MODELS
50PZ200
(50PZ200-UA)
60PZ200
(60PZ200-UA)
With stand
1171.9 mm x 770.9 mm x 289.8 mm 1390.8 mm x 905.2 mm x 334.7 mm
(46.1 inch x 30.3 inch x 11.4 inch)
(54.7 inch x 35.6 inch x 13.1 inch)
Without stand
1171.9 mm x 712.2 mm x 52.5 mm
(46.1 inch x 28.0 inch x 2.0 inch)
1390.8 mm x 835.5 mm x 52.5 mm
(54.7 inch x 32.8 inch x 2.0 inch)
With stand
29.8 kg (65.6 lbs)
42.6 kg (93.9 lbs)
Without stand
27.5 kg (60.6 lbs)
38.5 kg (84.8 lbs)
3.5 A / 350 W
5.3 A / 530 W
Current Value / Power consumption
Power requirement
42PW350
(42PW350-UE)
991.8 mm x 667.0 mm x 230.5 mm 1176.1 mm x 774.7 mm x 289.8 mm
(39.0 inch x 26.2 inch x 9.0 inch)
(46.3inch x 30.5 inch x 11.4 inch)
Power requirement
Weight
50PW340
(50PW340-UB)
With stand
Current Value / Power consumption
Dimensions
(W x H x D)
42PW340
(42PW340-UB)
AC100 - 240 V ~ 50/60 Hz
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
Weight
19LV2520
(19LV2520-UC)
22LV2520
(22LV2520-UC)
26LV2520
(26LV2520-UC)
19LV2500
(19LV2500-UA)
22LV2500
(22LV2500-UA)
26LV2500
(26LV2500-UA)
85
With stand
455.2 mm x 354.5 mm x 150.7 mm 471.2 mm x 365.9 mm x 155.4 mm 635.6 mm x 475.0 mm x 178.0 mm
(17.9 inch x 13.9 inch x 5.9 inch)
(18.5 inch x 14.4 inch x 6.1 inch)
(25.0 inch x 18.7 inch x 7.0 inch)
Without stand
455.2 mm x 313.1 mm x 40.9 mm 471.2 mm x 315.5 mm x 40.9 mm
(17.9 inch x 12.3 inch x 1.6 inch)
(18.5 inch x 12.4 inch x 1.6 inch)
635.6 mm x 413.5 mm x 40.9 mm
(25.0 inch x 16.2 inch x 1.6 inch)
With stand
2.7 kg (5.9 lbs)
3.4 kg (7.4 lbs)
5.4 kg (11.9 lbs)
Without stand
2.5 kg (5.5 lbs)
3.2 kg (7.0 lbs)
5.0 kg (11.0 lbs)
Current Value / Power consumption
Power requirement
1.4 A / 38 W
24 V
Adapter (DC Power)
1.7 A / 40 W
, 1.4 A
24 V
1.8 A / 50 W
, 1.7 A
24 V
, 1.8 A
In: AC 100 - 240 V ~ 50/60 Hz
Out: DC 24 V, 2.5 A
32LV2520
(32LV2520-UC)
MODELS
Dimensions
(W x H x D)
With stand
777.0 mm x 552.0 mm x 234.0 mm
(30.5 inch x 21.7 inch x 9.2 inch)
Without stand
777.0 mm x 501.0 mm x 35.4 mm
(30.5 inch x 19.7 inch x 1.3 inch)
With stand
11.9 kg (26.2 lbs)
Without stand
10.7 kg (23.5 lbs)
Current Value / Power consumption
Power requirement
Weight
32LV3500
(32LV3500-UA)
32LV3520
(32LV3520-UC)
37LV3500
(37LV3500-UA)
With stand
764.0 mm x 545.0 mm x 240.0 mm 888.0 mm x 614.0 mm x 240.0 mm
(30.0 inch x 21.4 inch x 9.4 inch)
(34.9 inch x 24.1 inch x 9.4 inch)
Without stand
764.0 mm x 484.0 mm x 35.4 mm 888.0 mm x 553.0 mm x 35.4 mm
(30.0 inch x 19.0 inch x 1.3 inch)
(34.9 inch x 21.7 inch x 1.3 inch)
With stand
11.4 kg (25.1 lbs)
13.5 kg (29.7 lbs)
Without stand
9.6 kg (21.1 lbs)
11.7 kg (25.7 lbs)
0.8 A / 80 W
1.0 A / 100 W
Current Value / Power consumption
Power requirement
0.7 A / 70 W
USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz
Other Country: AC 100 - 240 V ~ 50 / 60 Hz
MODELS
Dimensions
(W x H x D)
ENG
ENGLISH
Weight
32LV2500
(32LV2500-UA)
USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz
Other Country: AC 100 - 240 V ~ 50 / 60 Hz
86
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
Weight
42LV3500
(42LV3500-UA)
With stand
998.0 mm x 684.0 mm x 256.0 mm 1108.0 mm x 746.0 mm x 256.0 mm
(39.2 inch x 26.9 inch x 10.0 inch)
(43.6 inch x 29.3 inch x 10.0 inch)
Without stand
998.0 mm x 615.0 mm x 30.4 mm 1108.0 mm x 677.0 mm x 30.4 mm
(39.2 inch x 24.2 inch x 1.1 inch)
(43.6 inch x 26.6 inch x 1.1 inch)
With stand
15.5 kg (34.1 lbs)
20.9 kg (46.0 lbs)
Without stand
13.3 kg (29.3 lbs)
18.7 kg (41.2 lbs)
1.1 A / 110 W
1.4 A / 140 W
Current Value / Power consumption
Power requirement
USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz
Other Country: AC 100 - 240 V ~ 50 / 60 Hz
55LV3500
(55LV3500-UA)
MODELS
Dimensions
(W x H x D)
Weight
With stand
1286.0 mm x 847.0 mm x 338.0 mm
(50.6 inch x 33.3 inch x 13.3 inch)
Without stand
1286.0 mm x 847.0 mm x 30.4 mm
(50.6 inch x 33.3 inch x 1.1 inch)
With stand
25.5 kg (56.2 lbs)
Without stand
21.4 kg (47.1 lbs)
Current Value / Power consumption
ENGLISH
ENG
Power requirement
Weight
Without stand
663.0 mm x 423.0 mm x 79.9 mm 800.0 mm x 509.0 mm x 73.8 mm
(26.1 inch x 16.6 inch x 3.1 inch)
(31.4 inch x 20.0 inch x 2.9 inch)
With stand
7.3 kg (16.0 lbs)
9.2 kg (20.2 lbs)
Without stand
6.2 kg (13.6 lbs)
8.2 kg (18.0 lbs)
1.0 A / 100 W
1.2 A / 120 W
AC100 - 240 V ~ 50/60 Hz
MODELS
32LK430
(32LK430-UA)
42LK430
(42LK430-UA)
With stand
799.0 mm x 555.0 mm x 207.0 mm 1023.0 mm x 685.0 mm x 261.0 mm
(31.4 inch x 21.8 inch x 8.1 inch) (40.2 inch x 26.9 inch x 10.2 inch)
Without stand
799.0 mm x 506.0 mm x 73.5 mm 1023.0 mm x 635.0 mm x 76.6 mm
(31.4 inch x 19.9 inch x 2.8 inch)
(40.2 inch x 25.0 inch x 3.0 inch)
With stand
9.1 kg (20.0 lbs)
15.1 kg (33.2 lbs)
Without stand
8.1 kg (17.8 lbs)
13.5 kg (29.7 lbs)
1.2 A / 120 W
1.8 A / 180 W
Current Value / Power consumption
Power requirement
32LK330
(32LK330-UB)
663.0 mm x 484.0 mm x 206.8 mm 800.0 mm x 565.0 mm x 206.8 mm
(26.1 inch x 19.0 inch x 8.1 inch)
(31.4 inch x 22.2 inch x 8.1 inch)
Power requirement
Weight
26LK330
(26LK330-UB)
With stand
Current Value / Power consumption
Dimensions
(W x H x D)
1.6 A / 160 W
USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz
Other Country: AC 100 - 240 V ~ 50 / 60 Hz
MODELS
Dimensions
(W x H x D)
47LV3500
(47LV3500-UA)
42LV3520
(42LV3520-UC)
AC100 - 240 V ~ 50/60 Hz
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
Weight
795.0 mm x 568.0 mm x 207.0 mm 913.0 mm x 639.0 mm x 265.0 mm
(31.2 inch x 22.3 inch x 8.1 inch)
(35.9 inch x 25.1 inch x 10.4 inch)
Without stand
795.0 mm x 504.0 mm x 73.5 mm 913.0 mm x 571.0 mm x 77.4 mm
(31.2 inch x 19.8 inch x 2.8 inch)
(35.9 inch x 22.4 inch x 3.0 inch)
With stand
9.2 kg (20.2 lbs)
12.8 kg (28.2 lbs)
Without stand
8.1 kg (17.8 lbs)
11.1 kg (24.4 lbs)
1.2 A / 120 W
1.6 A / 160 W
Power requirement
AC100 - 240 V ~ 50/60 Hz
MODELS
Weight
Without stand
1019.0 mm x 631.0 mm x 76.5 mm
(40.1 inch x 24.8 inch x 3.0 inch)
15.1 kg (33.2 lbs)
19.0 kg (41.8 lbs)
Without stand
13.4 kg (29.5 lbs)
17.3 kg (38.1 lbs)
1.8 A / 180 W
2.3 A / 230 W
AC100 - 240 V ~ 50/60 Hz
47LK520
(47LK520-UA)
With stand
1024.0 mm x 685.0 mm x 261.0 mm
(40.3 inch x 26.9 inch x 10.2 inch)
1137.0 mm x 758.0 x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch)
Without stand
1024.0 mm x 621.0 mm x 76.8 mm
(40.3 inch x 24.4 inch x 3.0 inch)
1137.0 mm x 685.0 mm x 76.8 mm
(44.7 inch x 26.9 inch x 3.0 inch)
With stand
15.5 kg (34.1 lbs)
20.3 kg (44.7 lbs)
Without stand
13.9 kg (30.6 lbs)
18.3 kg (40.3 lbs)
2.0 A / 200 W
2.5 A / 250 W
Power requirement
AC100 - 240 V ~ 50/60 Hz
MODELS
With stand
1329.0 mm x 872.0 mm x 330.0 mm
(52.3 inch x 34.3 inch x 12.9 inch)
Without stand
1329.0 mm x 796.0 mm x 96.5 mm
(52.3 inch x 31.3 inch x 3.7 inch)
With stand
33.0 kg (72.7 lbs)
Without stand
29.8 kg (65.6 lbs)
Current Value / Power consumption
Power requirement
55LK520
(55LK520-UA)
3.2 A / 320 W
AC100 - 240 V ~ 50/60 Hz
RF module (BM-LDS201) specification (For PW340, PW350, PW350U, PW350R, PZ200 series)
For TV By using a 2.4 GHz bandwidth radio frequency(RF).
Output: 1 dBm or lower
yy
Maximum Communication Distance: 10 m (30 ft) in an open space
yy
Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
yy
Transfer Rate: 250 kbps
yy
FCC ID of RF module inside TV
yy
FCC ID: BEJLDS201
ENG
ENGLISH
42LK520
(42LK520-UA)
Current Value / Power consumption
Weight
1132.0 mm x 695.0 mm x 76.5 mm
(44.5 inch x 27.3 inch x 3.0 inch)
With stand
MODELS
Dimensions
(W x H x D)
47LK450
(47LK450-UB)
1019.0 mm x 698.0 mm x 265.0 mm 1132.0 mm x 762.0 mm x 265.0 mm
(40.1 inch x 27.4 inch x 10.4 inch)
(44.5 inch x 30.0 inch x 10.4 inch)
Power requirement
Weight
42LK450
(42LK450-UB)
With stand
Current Value / Power consumption
Dimensions
(W x H x D)
37LK450
(37LK450-UB)
With stand
Current Value / Power consumption
Dimensions
(W x H x D)
32LK450
(32LK450-UB)
87
88
SPECIFICATIONS
RGB (PC), HDMI (PC) supported mode (
Plasma
)
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
Resolution
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1360x768
47.712
60.015
1280x1024
63.981
60.02
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.5
60.00
Resolution
LCD
)
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
ENGLISH
ENG
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1360x768
47.712
60.015
1280x768
RGB-PC
47.776
59.870
1280x1024
63.981
60.02
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.5
60.00
For 22LV2500, 22LV2520,
32/37/42/47/55LV3500, 32/42LV3520,
32/42LK430, 32/37/42/47LK450, 42/47/55LK520
HDMI (DTV) supported mode (
Resolution
Plasma
LCD
)
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
720x480p
31.47
31.50
59.94
60.00
1280x720p
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
1920x1080p
26.97
27.00
33.71
33.75
67.432
67.50
23.976
24.00
29.97
30.00
59.94
60.00
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Component supported mode (
RGB (PC), HDMI (PC) supported mode (
720x400
Component ports on the
TV
Video output ports
on DVD player
For 50/60PZ200
Resolution
Component port connecting information
Plasma
LCD
)
Horizontal
Vertical
Frequency (KHz) Frequency (Hz)
720x480i
15.73
15.73
59.94
60.00
720x480p
31.47
31.50
59.94
60.00
1280x720p
44.96
45.00
59.94
60.00
1920x1080i
33.72
33.75
59.94
60.00
1920x1080p
26.97
27.00
33.71
33.75
67.432
67.50
23.976
24.00
29.97
30.00
59.94
60.00
SPECIFICATIONS
89
Video Supported Formats
File
Video Decoder
Extension
name
Audio Codec
mpg, mpeg
MPEG1, MPEG2
MP2, MP3, Dolby Digital, LPCM
dat
MPEG1
MP2
ts, trp, tp
MPEG2, H.264, AVS, VC1
MP2, MP3, Dolby Digital
vob
MPEG1, 2
MP2, MP3, Dolby Digital, LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12,
DivX 5.x, DivX 6, Xvid 1.00, Xvid
1.01, Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP3
mkv
H.264, MPEG-1,2,4
divx, avi
MPEG2, MPEG4, DivX 3.11, DivX
4, DivX 5, DivX 6, Xvid 1.00, Xvid
1.01, Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP2, MP3, Dolby Digital, LPCM,
ADPCM
Motion JPEG
(avi, mp4, mkv)
JPEG
LPCM, ADPCM
asf, wmv
VC1
WMA
flv
Sorenson H.263, H264
MP3
MP2, MP3, Dolby Digital, LPCM
Max Resolution
1920 x 1080 @ 30p
(Only Motion JPEG
640x480@30p)
ENG
ENGLISH
3D Supported Formats (For 3D TV)
Signal
Resolution
720p
1280x720
1080i
1080p
1920x1080 27.00
Playable 3D video format
Top & Bottom, Side by Side
59.94 / 60.00
HDMI 3D Frame Packing
Top & Bottom, Side by Side
Top & Bottom, Side by Side, Checker Board
Single Frame Sequential
24.00
Top & Bottom, Side by Side, Checker Board
53.95 / 54.00
23.98 / 24.00 HDMI 3D Frame Packing
33.75
30.00
Top & Bottom, Side by Side
Checker Board
1920x1080 33.75
30.00
Top & Bottom, Side by Side
Checker Board, MPO (Photo)
Resolution
Playable 3D video format
Other Resolution
Top & Bottom, Side by Side
PC Input
1920x1080
(PZ200 series)
DTV
89.90 / 90.00
67.432 / 67.50
1080p
Component
(For Plasma
TV)
Vertical
Frequency
(Hz)
44.96 / 45.00
33.72 / 33.75
HDMI Input
USB Input
Horizontal
Frequency
(kHz)
66.587
59.93
720p
1280x720
44.96 / 45.00
59.94 / 60.00
1080i
1920x1080 33.72 / 33.75
59.94 / 60.00
Top & Bottom, Side by Side
Top & Bottom, Side by Side
Signal
Playable 3D video format
720p, 1080i
Top & Bottom, Side by Side
90
IR CODES
IR CODES
(Depending on model)
How to Connect
Connect your wired remote control to the Remote Control port on the TV.
Remote Control IR Codes
Output waveform
Single pulse, modulated with 37.917kHz signal at 455kHz
Tc
T1
Frame configuration
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
ENGLISH
ENG
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
Tf
Lead code
9 ms
4.5 ms
Repeat code
0.55 ms
9 ms
2.25 ms
Bit description
Bit “0”
Bit “1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
IR CODES
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
91
Note
POWER
Remote control Button
(Power On/Off)
0F
TV
Remote control Button
DC
3D
Remote control Button
45
Q.MENU
Remote control Button
5B
EXIT
Remote control Button
43
Home
Remote control Button
D6
TV
0B
INPUT
Remote control Button
Discrete IR Code
(TV Input Selection)
10 - 19
Number Key 0-9
Remote control Button
C4
POWER ON
4C
- (Dash)/LIST
Remote control Button
Discrete IR Code
(Only Power On)
1A
FLASHBK
Remote control Button
C5
POWER OFF
9
MUTE/DELETE
Remote control Button
Discrete IR Code
(Only Power Off)
2
VOL +
Remote control Button
5A
AV1
3
VOL -
Remote control Button
Discrete IR Code
(AV1 Input Selection)
0
CH ^
Remote control Button
D0
AV2
1
CH v
Remote control Button
Discrete IR Code
(AV2 Input Selection)
1E
BF
COMPONENT1
Discrete IR Code
(Component1 Input
Selection)
D4
COMPONENT2
Discrete IR Code
(Component2 Input
Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
CE
HDMI1
Discrete IR Code
(HDMI1 Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
E9
HDMI3
Discrete IR Code
(HDMI3 Input Selection)
DA
HDMI4
Discrete IR Code
(HDMI4 Input Selection)
76
Ratio 4:3
Discrete IR Code
(Only 4:3 Mode)
77
Ratio 16:9
Discrete IR Code
(Only 16:9 Mode)
AF
Ratio Zoom
Discrete IR Code
(Only Zoom Mode)
FAV/MARK
Remote control Button
40
^
Remote control Button
41
v
Remote control Button
7
<
Remote control Button
6
>
Remote control Button
44
ENTER
Remote control Button
28
BACK
Remote control Button
79
RATIO
Remote control Button
FREEZE
Remote control Button
95
ENERGY SAVING
Remote control Button
7E
SIMPLINK
Remote control Button
AA
INFO
Remote control Button
30
AV MODE
Remote control Button
72
RED
Remote control Button
71
GREEN
Remote control Button
63
YELLOW
Remote control Button
61
BLUE
Remote control Button
B1
n
Remote control Button
B0

Remote control Button
BA
yy
Remote control Button
8E

Remote control Button
8F

Remote control Button
BA (
Plasma
)
ENG
ENGLISH
08
92
EXTERNAL CONTROL DEVICE SETUP
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to
an external control device (such as a computer or
an A/V control system) to control the product’s
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Type of connector;
D-Sub 9-Pin Male
1
5
6
9
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
No.
ENGLISH
ENG
NOTE
RS-232C on this unit is intended to be used
yy
with third party RS-232C control hardware
and software. The instructions below
are provided to help with programming
software or to test functionality using telenet
software. RS-232C connection cables are not
supplied with the product.
Pin name
1
No connection
2
RXD (Receive data)
3
TXD (Transmit data)
4
DTR (DTE side ready)
5
GND
6
DSR (DCE side ready)
7
RTS (Ready to send)
8
CTS (Clear to send)
9
No Connection
EXTERNAL CONTROL DEVICE SETUP
RS-232C configurations
Set ID
Set ID number.
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
OPTION
TV
ꔂ Move
ꔉ Enter
• Language
RXD
2
3
TXD
TXD
3
2
RXD
GND
5
5
GND
DTR
4
6
DSR
DSR
6
4
DTR
RTS
7
8
CTS
CTS
8
7
RTS
D-Sub 9
93
D-Sub 9
• Caption
: Off
• Power Indicator
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔉ
ꔀ
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
OPTION and press ENTER.
3 Press the Navigation buttons to scroll to Set ID
and press ENTER.
3-Wire Configurations(Not standard)
4 Scroll left or right to select a set ID number and
select CLOSE. The adjustment range is 1-99.
3
TXD
TXD
3
2
RXD
GND
5
5
GND
DTR
4
6
DSR
DSR
6
4
DTR
RTS
7
8
CTS
CTS
8
7
RTS
D-Sub 9
D-Sub 9
5 When you are finished, press EXIT.
*Real data mapping
0 : Step 0
…
2
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
ENG
ENGLISH
RXD
…
TV
…
PC
94
EXTERNAL CONTROL DEVICE SETUP
Communication Parameters
Stop bit: 1 bit
yy
Communication code: ASCII code
yy
Use a crossed (reverse) cable.
yy
Baud rate: 9600 bps (UART)
yy
Data length: 8 bits
yy
Parity : None
yy
Command reference list
COMMAND1
01. Power
COMMAND2
DATA
(Hexadecimal)
COMMAND1
COMMAND2
DATA
(Hexadecimal)
ENGLISH
ENG
k
a
00 - 01
14. Treble
k
r
00 - 64
02. Input Select x
b
(See p.96)
15. Bass
k
s
00 - 64
03. Aspect
Ratio
k
c
(See p.96)
16. Balance
k
t
00 - 64
04. Screen
Mute
k
d
00 - 01
17. 3D (For 3D
TV)
x
t
(See p.97)
05. Volume
Mute
k
e
00 - 01
18. Color
Temperature
x
u
00 - 64
06. Volume
Control
k
f
00 - 64
19. Extended
3D (For 3D TV)
x
v
(See p.97)
07. Contrast
k
g
00 - 64
20. ISM
Method (
j
p
(See p.98)
08. Brightness
k
h
00 - 64
21. Energy
Saving
j
q
(See p.98)
09. Color
k
i
00 - 64
22. Auto
Configuration
j
u
(See p.98)
10. Tint
k
j
00 - 64
24. Channel
Add/Del
m
b
00 - 01
11. Sharpness
k
k
00 - 64
25. Key
m
c
(See p.98)
12. OSD Select k
l
00 - 01
26. Backlight
( LCD )
m
g
00 - 64
13. Remote
Control
Lock Mode
m
00 - 01
23. Channel
Tuning
k
Plasma
)
COMMAND1 COMMAND2
DATA00
DATA01
DATA02
DATA03
DATA04
DATA05
(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)
m
physical
program
high
a
major
program
low
major low
minor high minor low
attribute
EXTERNAL CONTROL DEVICE SETUP
95
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] :You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is
1~ 99. When selecting Set ID ‘0’, every connected the set is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, set will not send the status during the standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
ENG
ENGLISH
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
96
EXTERNAL CONTROL DEVICE SETUP
01. Power (Command: k a)
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this model, set will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command: x b)
To select input source for set.
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable)
Data 10: Analog (Antenna)Data 11: Analog (Cable)
Data 20: AV or AV1
Data 21: AV2
Data 40: Component or Component1
Data 41: Component2
Data 60: RGB-PC Data 90: HDMI1
Data 91: HDMI2 Data 92: HDMI3
Data 93: HDMI4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 Data: 09: Just scan
Data 02: 16:9 Data: 10: Cinema Zoom 1
Data 04: Zoom
Data 06: Set by program Data 1F: Cinema Zoom16
…
ENGLISH
ENG
* Use the feature depending on your model.
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on), Video-out
Mute off
Data 01: Screen mute on (Picture off)
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute on,
TV will not display On Screen Display (OSD).
05. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the Monitor set, use this mode. When
main power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not
turn on by POWER button of remote control and on
the TV.
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. 3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data1
00: 3D On
02: 3D to 2D
Data2
00: Top and Bottom
02: Check Board
01: 3D Off
03: 2D to 3D
01: Side by Side
03: Frame Sequential
Data3
00: Right to Left
01: Left to Right
Data4
3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
*If data1 is 00(3D On), data4 has no meaning.
*If data1 is 01(3D Off) or 02(3D to 2D), data2, data3
and data4 have no meaning.
*If data1 is 03(2D to 3D), data2 and data3 have no
meaning.
Data 1
00
01
02
03
Data 2
o
x
x
x
Data 3
o
x
x
x
Data 4
x
x
x
o
x : Don’t care
Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
18. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
19. Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]
Data1: 3D option
00: 3D Picture Correction
01: 3D Depth (2D to 3D Only)
02: 3D Viewpoint
03: 3D Picture Size
04: 3D Picture Balance
05: 3D Optimization
Data2: It has own range for each 3D option
determined by Data1.
1) When Data1 is 00
00: Right to Left
01: Left to Right
2) When Data1 is 01, 02
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal
code)
3) When Data1 is 03
00: Just Scan
01: 16:9
4) When Data1 is 04
00: Off
01: On
5) When Data1 is 05
Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal
code)
Acknowledgement [v][ ][OK][Data1][Data2][x]
[v][ ][NG][Data1][x]
* Use the feature depending on your model.
ENG
ENGLISH
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
97
98
EXTERNAL CONTROL DEVICE SETUP
20. ISM Method (Command: j p) (
)
To avoid having a fixed image remain on screen.
Plasma
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
04: White Wash
08: Normal
20: Color Wash
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
21. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: off
01: Minimum
02: Medium
03: Maximum
04: Auto/Intelligent sensor (depending on model)
05: Screen off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
22. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically. Auto configuration only works
in RGB-PC mode.
ENGLISH
ENG
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
23. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel to the Major number, the Physical
number is not required when sending a command.
Data 00: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
Data 01 & 02: Major Channel Number
Data 01: High byte
Data 02: Low byte
Two bytes are available for the Major and Minor,
normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
The table above lists the binary code which must
be converted to Hexadecimal before sending. For
example:
The binary code to tune the sub source to an NTSC
cable channel is “1000 0001”, which translates to
“81” in Hex.
* 7th bit : For which source do you want to change
the channel.
* 6th bit: Use a two part or one part channel. Most
cases just use 0 since it’s ignored when using
NTSC.
* 5th bit: Use 0 with NTSC since it can only use
the physical channel number. Normally use 1 for
ATSC since most times it doesn’t matter what the
physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35.
Data 00 = Physical of 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = 0000 0001 in binary = 01
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
* Use the feature depending on your model.
24. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
25. Key (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by
POWER button of remote control only.
26. Backlight (Command: m g) (
To adjust screen backlight.
LCD
)
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal
code)
*Refer to “Real data mapping”.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
99
* Table List (Channel Tuning)
7
Main/Sub
Picture
6
Two/One
Part
Channel
5
Using
Physical
Channel
4
Reserved
3
2
1
0
Step
0
Main
0
Two
0
Use
x
0
0
0
0
NTSC Air
1
Sub
1
One
1
No Use
x
0
0
0
1
NTSC Cable
x
0
0
1
0
ATSC Air
x
0
0
1
1
ATSC Cable_std
x
0
1
0
0
ATSC Cable_hrc
x
0
1
0
1
ATSC Cable_irc
x
0
1
1
0
ATSC cable_auto
x
0
1
1
1
Reserved
x
x
x
x
x
...
x
1
1
1
1
Reserved
ENG
ENGLISH
100 OPEN SOURCE LICENSE
OPEN SOURCE LICENSE
Open source software notice
Please be informed that LG Electronics products may contain open source software listed in the tables
below.
ENGLISH
ENG
License
Component
OpenSSL license
- openssl
MIT license
- libcurl
- ncurses
expat license
- expat
Freetype license
- freetype
JPEG license
- libjpeg
Zlib/libpng license
- libmng
- libpng
- md5 checksum
- tinyxml
- zlib
X.net license
- libicu
BSD license
- strace
- xySSL
RSA data security license
- MD5
LG Electronics products may also contain open source software listed as Components in the table below,
and you may download the complete source code thereof free of charge, from LG Electronics website
(http://opensource.lge.com) for a period of three (3) years from our last shipment of this product. Please be
informed that the open source software is subject to the terms and conditions of the applicable open
source licenses, which are provided to you hereinbelow.
License
Component
GNU GPL v2.0
- Linux kernel 2.6
- busybox
- e2fsprogs
- gdbserver
- jfsutils
- mtd-utils
- procps
- u-boot
- udhcpc
GNU LGPL v2.1
- directFB
- gconv
- glibc
MPL 1.1
- nanox
OPEN SOURCE LICENSE
101
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know
that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’
reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program
or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true
depends on what the Program does.
ENG
ENGLISH
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
102
OPEN SOURCE LICENSE
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work based on the Program is not required
to print an announcement.)
ENGLISH
ENG
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms
of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.)
OPEN SOURCE LICENSE
103
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the
source code distributed need not include anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program
or works based on it.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of
the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
ENG
ENGLISH
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
104
OPEN SOURCE LICENSE
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
ENGLISH
ENG
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
GNU Lesser General Public License
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you
first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any
particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new
free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
OPEN SOURCE LICENSE
105
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after making
changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library
is modified by someone else and passed on, the recipients should know that what they have is not the original version,
so that the original author’s reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version
of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the
library, whereas the latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License
(also called “this License”). Each licensee is addressed as “you”.
ENG
ENGLISH
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
106
OPEN SOURCE LICENSE
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work
based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another
language. (Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy
of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
ENGLISH
ENG
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that
uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort
to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
OPEN SOURCE LICENSE
107
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is
not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is
legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section
6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such
modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to
the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/
ENG
ENGLISH
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
108
OPEN SOURCE LICENSE
or source code, so that the user can modify the Library and then relink to produce a modified executable containing the
modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run
time a copy of the library already present on the user’s computer system, rather than copying library functions into the
executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
ENGLISH
ENG
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution
of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these
two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works
based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
OPEN SOURCE LICENSE
109
ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor
to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ENG
ENGLISH
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
110
OPEN SOURCE LICENSE
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a
pointer to where the full notice is found.
<one line to give the library’s name and an idea of what it does.> Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later
version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
ENGLISH
ENG
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer”
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James
Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
OPEN SOURCE LICENSE
111
Mozilla Public License 1.1 (MPL 1.1)
1. Definitions.
1.0.1. “Commercial Use”
means distribution or otherwise making the Covered Code available to a third party.
1.1. ‘’Contributor’’
means each entity that creates or contributes to the creation of Modifications.
1.2. ‘’Contributor Version’’
means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by
that particular Contributor.
1.3. ‘’Covered Code’’
means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof.
1.4. ‘’Electronic Distribution Mechanism’’
means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. ‘’Executable’’
means Covered Code in any form other than Source Code.
1.7. ‘’Larger Work’’
means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.
1.8. ‘’License’’
means this document.
1.8.1. “Licensable”
means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently
acquired, any and all of the rights conveyed herein.
1.9. ‘’Modifications’’
means any addition to or deletion from the substance or structure of either the Original Code or any previous
Modifications. When Covered Code is released as a series of files, a Modification
is:
(a) Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
(b) Any new file that contains any part of the Original Code or previous Modifications.
1.10. ‘’Original Code’’
means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as
Original Code, and which, at the time of its release under this License is not already Covered Code governed by this
License.
1.10.1. “Patent Claims”
means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.
ENG
ENGLISH
1.6. ‘’Initial Developer’’
means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.
112
OPEN SOURCE LICENSE
1.11. ‘’Source Code’’
means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any
associated interface definition files, scripts used to control compilation and installation of an Executable, or source code
differential comparisons against either the Original Code or another well known, available Covered Code of the
Contributor’s choice. The Source Code can be in a compressed
or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. “You’’ (or “Your”)
means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future
version of this License issued under Section 6.1.For legal entities, “You’’ includes any entity which controls, is controlled
by, or is under common control with You. For purposes of this definition, “control’’ means (a) the power, direct or indirect,
to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than
fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce,
modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications,
and/or as part of a Larger Work; and
ENGLISH
ENG
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice,
sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original
Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code;
2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the
combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, nonexclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either
on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone
and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have
made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of
the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from
the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except
as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence
of Modifications made by that Contributor.
OPEN SOURCE LICENSE
113
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this
License or a future version of this License released under Section 6.1, and You must include a copy of this License with
every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that
alters or restricts the applicable version of this License or the recipients’ rights hereunder. However, You may include an
additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under the
terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution
Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution
Mechanism,
must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months
after a subsequent version of that particular Modification has been made available to such recipients. You are responsible
for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained
by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create
that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived,
directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer
in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the
origin or ownership of the Covered Code.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor’s
Modifications are Contributor’s original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by
this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular
Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where
a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a
Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source
Code where You describe recipients’ rights or ownership rights relating to Covered Code. You may choose to offer, and
to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code.
However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor You must
make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or
such Contributor as a result of warranty, support, indemnity or liability terms You offer.
ENG
ENGLISH
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party’s intellectual property rights is required to exercise the
rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code
distribution titled “LEGAL’’ which describes the claim and the party making the claim in sufficient detail that a recipient
will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described
in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and
shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those
who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs.
If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent
licenses which are reasonably necessary to implement that API, Contributor must also include this information in the
LEGAL file.
114
OPEN SOURCE LICENSE
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that
Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under
the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The
notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which
You describe recipients’ rights relating to the Covered Code. You may distribute the Executable version of Covered Code
or ownership rights under a license of Your choice, which may contain terms different from this License, provided that
You are in compliance with the terms of this License and that the license for the Executable version does not attempt to
limit or alter the recipient’s rights in the Source Code version from the rights set forth in this License. If You distribute
the Executable version under a different license You must make it absolutely clear that any terms which differ from this
License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial
Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any
such terms You offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License
and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License
are fulfilled for the Covered Code.
ENGLISH
ENG
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code
due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum
extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL
file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to
understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered
Code.
6. Versions of the License.
6.1. New Versions.
Netscape Communications Corporation (‘’Netscape’’) may publish revised and/or new versions of the License from time
to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use it
under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent
version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable
to Covered Code created under this License.
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is not
already Covered Code governed by this License), You must (a) rename Your license so that the phrases ‘’Mozilla’’,
‘’MOZILLAPL’’, ‘’MOZPL’’, ‘’Netscape’’, “MPL”, ‘’NPL’’ or any confusingly similar phrase do not appear in your license
(except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license
contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial
Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be
modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS’’ BASIS, WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS
FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE
OPEN SOURCE LICENSE
115
PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME
THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY
CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein
and fail
to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are
properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect
beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial
Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as
“Participant”) alleging that:
(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such
Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate
prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually
agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your
litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable
royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not
withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration
of the 60 day notice period specified above.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under
Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the
event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE),
CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY
DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL
HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT
APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S NEGLIGENCE TO THE
EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT
APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a ‘’commercial item,’’ as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of ‘’commercial computer software’’ and ‘’commercial computer software documentation,’’ as such terms are used in 48 C.F.R.
12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S.
Government End Users acquire Covered Code with only those rights set forth herein.
ENG
ENGLISH
(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly infringes any
patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the
date You first made, used, sold, distributed, or had made, Modifications made by that Participant.
116
OPEN SOURCE LICENSE
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is
held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys’ fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or
indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors
to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any
admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as Multiple-Licensed. Multiple-Licensed means that the
Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the alternative
licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
ENGLISH
ENG
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License
Version 1.1 (the “License”); you may not use this file except in
compliance with the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an “AS IS”
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________.All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms
of the _____ license (the [___] License), in which case the
provisions of [______] License are applicable instead of those
above.If you wish to allow use of your version of this file only
under the terms of the [____] License and not to allow others to use
your version of this file under the MPL, indicate your decision by
deleting the provisions above and replace them with the notice and
other provisions required by the [___] License. If you do not delete
the provisions above, a recipient may use your version of this file
under either the MPL or the [___] License.”
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original
Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your
Modifications.]
OPEN SOURCE LICENSE
117
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived
from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.
org/)”
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
This product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL
code. The SSL documentation included with this distribution is covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is
used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the
form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
ENG
ENGLISH
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
118
OPEN SOURCE LICENSE
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must
include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
MIT license
ENGLISH
ENG
- libcurl
Copyright (c) 1996 - 2010, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
- ncurses
Copyright (c) 1998 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR HE USE OR OTHER DEALINGS IN THE SOFTWARE.
OPEN SOURCE LICENSE
119
Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the ale, use or other dealings in this Software without prior written authorization.
Expat license
The source package was downloaded from <URL:http://expat.sourceforge.net>.
The original packager is Adam Di Carlo <aph@debian.org>.
The current maintainer is Ardo van Rangelrooij <ardo@debian.org>.
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
The FreeType Project LICENSE
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
============
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType
font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license
affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion
and use of free software in commercial and freeware products alike. As a consequence, its main points are that:
- We don’t promise that this software works. However, we will be interested in any kind of bug reports. (`as is’ distribution)
- You can use this software for whatever you want, in parts or full form, without having to pay us. (`royalty-free’ usage)
- You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the FreeType code. (`credits’)
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We
ENG
ENGLISH
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
120
OPEN SOURCE LICENSE
thus encourage you to use the following text:
Portions of this software are copyright <year> The FreeType Project (www.freetype.org). All rights reserved.
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Throughout this license, the terms `package’, `FreeType Project’ and `FreeType archive’ refer to the set of files originally
distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project’, be they named
as alpha, beta or final release.
`You’ refers to the licensee, or person using the project, where `using’ is a generic term including compiling the project’s
source code as well as linking it to form a `program’ or `executable’. This program is referred to as `a program using the
FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive. If you
are unsure whether or not a particular file is covered by this license, you must contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
ENGLISH
ENG
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED `AS IS’ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES
CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object
code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights
granted herein, subject to the following conditions:
- Redistribution of source code must retain this license file (`FTL.TXT’) unaltered; any additions, deletions or changes to
the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.
- Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the
FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in
your documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more
of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project’,
`FreeType Engine’, `FreeType library’, or `FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify
it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all
the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.
If you are looking for support, start in this list if you haven’t found anything to help you in the documentation.
freetype-devel@nongnu.org
OPEN SOURCE LICENSE
121
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at http://www.freetype.org
JPEG license
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly
indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based
in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.
zlib/libpng License
This product may contain open source software licensed under zlib/libpng License.
(Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
(Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
Md5 checksum : Copyright (C) 1999, 2000, 2002 Aladdin Enterprises.
yy
Zlib : Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
yy
This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it
and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
X.net license
Copyright (c) 1995-2001 International Business Machines Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documen
ENG
ENGLISH
Libmng : Copyright © 2000-2008 Gerard Juyn (gerard@libmng.com)
yy
Libpng : Copyright (c) 1998-2008 Glenn Randers-Pehrson
yy
122
OPEN SOURCE LICENSE
tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software
is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior written authorization of the copyright holder.
BSD license
ENGLISH
ENG
- strace
Copyright (c) 1991, 1992 Paul Kranenburg <pk@cs.few.eur.nl>
Copyright (c) 1993 Branko Lankester <branko@hacktic.nl>
Copyright (c) 1993 Ulrich Pegelow <pegelow@moorea.uni-muenster.de>
Copyright (c) 1995, 1996 Michael Elizabeth Chastain <mec@duracef.shout.net>
Copyright (c) 1993, 1994, 1995, 1996 Rick Sladkey <jrs@world.std.com>
Copyright (C) 1998-2003 Wichert Akkerman <wakkerma@deephackmode.org>
Copyright (c) 2002-2008 Roland McGrath <roland@redhat.com>
Copyright (c) 2003-2008 Dmitry V. Levin <ldv@altlinux.org>
Copyright (c) 2007-2008 Jan Kratochvil <jan.kratochvil@redhat.com>
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- xyssl
Copyright (C) 2006-2008 Christophe Devine
Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org>
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following dis-
OPEN SOURCE LICENSE
123
claimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
RSA Data Security license
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5
Message-Digest Algorithm” in all material mentioning or referencing this software or this function.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability
of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
ENG
ENGLISH
License is also granted to make and use derivative works provided that such works are identified as “derived from the
RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.
The model and serial numbers of the TV is
located on the back of the TV
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising