LG | 29FC2RL | LG 29FC2RL Owner’s Manual

@6X?he
N@)Xhe
?3@)fW-X?e
?@K?f?V@Ye?O&@)Xe
?@@@@@@@@@@@@@@@@@@)e
?@@?e?@f?@h
?@@?e?@@@e?@@@g
?@@?e?@@He?@@Hg
?@@?e?@@?e?@@?O26Xe
?@@@@@@@@@@@@@@@@@@)e
?@@?e?@@?e?@@?g
?@@?e?@@?e?@@?g
?@@?e?@@?e?@@?g
?@@?e?@@?e?@@?g
?@@?e?@@@@@@@5?g
?@@?e?@M?eI(Y?g
J@5?
7@H?@??/X??/K?e/Xf
@5e@??N)X?V'6X?N)X?e
?J(Y?J@?e@1eN@1??@)Xe
?7H?W&@?e@5e?@5??3@)e
J5e7@5?e(Ye?(Y??N@He
.Ye@0Y?hf@?e
Color Television
OWNER'S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Safety Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Cleaning
Unplug this television receiver from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the
television receiver manufacturer as they may
cause hazards.
never be blocked by placing the television receiver
on a bed, sofa, rug, or other similar surface. This
television receiver should not be placed in a builtin installation such as a bookcase unless proper
ventilation is provided.
It is recommended not to operate this unit near
speakers or big metallic furnitures in order to keep
their magnetism from disturbing colors purity
(uniformity) on the screen.
Power Supply
This television receiver should be operated only
from the type of power source indicated on the
marking label. If you are not sure of the type of
power supplied to your home, consult your
television dealer or local power company.
Wet Location Marking:
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Installation
Do not use this television receiver near water, for
example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this television receiver on an
unstable cart, stand, or table. The television
receiver may fall, causing serious injury to a child
or an adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver.
Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting
kit approved by the manufacturer.
Slots and openings in the cabinet and the back or
bottom are provided for ventilation, and to insure
reliable operation of the television receiver, and to
protect it from overheating. These openings must
not be blocked or covered. The openings should
Use
Do not allow anything to rest on the power cord.
Do not locate this television receiver where the
cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Never push objects of any kind into this television
receiver through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock.
Never spill liquid of any kind on the television
receiver.
Service
Do not attempt to service this television yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
Writing Model And Serial Numbers
Date of Purchase
Dealer Purchased from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
The serial number and model number are found
on the back of this unit. The serial number is
unique to this unit. You should record requested
information here and retain this guide as a
permanent record of your purchase. Please retain
your purchase receipt as your proof of purchase.
2
CONTENTS
Description of controls ......................................................................................................3
Basic TV operation .............................................................................................................6
Various function .................................................................................................................8
Picture control ..................................................................................................................10
Sound control ...................................................................................................................10
Closed caption function....................................................................................................12
PIP function (some models) .............................................................................................13
Connection of external equipment (some models) ........................................................14
Troubleshooting check list ...............................................................................................19
Description of controls
Fitting Batteries in the Remote Control Unit
The remote control is powered by batteries. This requires AAA type batteries for operation. To ensure
consistent operation, change the batteries about once a year.
Caution : Batteries installed incorrectly may leak and damage the remote control. Do not mix old and
new batteries or different types of batteries (for example, standard and alkaline).
1. Remove the battery compartment cover by sliding it in the arrowhead direction.
2. Insert new batteries as indicated by the polarity markings (+ and -) inside the compartment.
3. Replace the battery compartment cover.
3
Description of controls
1
2
3
4
5
POWER TV/VIDEO
SLEEP
MTS
A.PROG MEMORY/ERASE CAPTION
1
2
3
4
5
6
7
8
9
6
9
10
11
12
0
FCR
MUTE
CH
7
VOL
ENTER
VOL
CH
8
MENU
13
POWER
MUTE
1
6
5
CAPTION
TV/VIDEO
11
9
SLE
U
8
MEN
EP
2
CH
7
VOL
ENTER
VOL
CH
3
4
13
MTS
E
AS
/ER
ORY
MEM
A. P
ROG
10
FCR
13
12
1. POWER BUTTON (or ON/OFF )
Refer to "Turning on/off the TV".
2. SLEEP BUTTON
To set the desired sleep time.
3. A. PRGO (Auto program) BUTTON
To memorize channels by AUTO PROGRAM.
4. MTS BUTTON (some models)
To listen to the MTS sound.
5. NUMBER BUTTONS
To select the desired channel directly.
Switches the set on from standby.
6. MUTE BUTTON
To mute the sound. Again to restore the muted
sound.
7. CH UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
• Switches the set on from standby.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
ENTER (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote control
only).
8. MENU BUTTON
To display on-screen.
9. TV/VIDEO BUTTON
To select TV, VIDEO or COMPONENT mode.
Switches the set on from standby.
10. MEMORY/ERASE BUTTON (some models)
To memorize or erase the desired channel.
11. CAPTION BUTTON (some models)
To select the CAPTION mode.
Refer to "Closed caption function".
12. FCR (Favorite Channel Review) BUTTON
To select the favorite channel.
Refer to "Favorite channel memory".
13. : No function.
14. STAND BY INDICATOR (STAND BY)
Illuminates red when the TV is in standby mode.
Refer to "Turning on/off the TV".
15. REMOTE CONTROL SENSOR
4
This is a simplified representation of front panel.
ON/OFF
TV/VIDEO MENU
VOL
CH
7
14
1
15
7
9 8
8
9
1
14
15
ON/OFF
TV/VIDEO MENU
VOL
CH
ON/OFF
1
14 15
5
9 8
14
15
9
8
7
1
14
15
9
8
7
CH
TV/VIDEO MENU
STAND BY
1
ON/OFF
VOL
1 14 15 9 8
( )
( )
ON/OFF
7
9
8
1
14
1
15 14
5
15
7
Basic TV operation
Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
may be different from your TV’s because it is just
an example to help you with the TV operation.
select the desired channel with the D / E buttons.
Using the A.PROG button
You can conveniently perform AUTO PROGRAM
using the A.PROG button on the remote control.
1. Press the A.PROG button.
2. Press the G or A.PROG button.The AUTO
PROGRAM starts now.
If you want to stop auto programming, press the
ENTER (A) button.
Only the channels searched up to that time are
memorized.
Turning on/off the TV
Press the POWER (or ON/OFF) button on
the set. At this time, the set switches to
standby mode and the standby indicator
lights up in red.
To switch the TV on from standby mode,
press the TV/VIDEO, CH D / E button on
the set or POWER, TV/VIDEO, CH D / E or
number button on the remote control.
A channel number will be displayed on the
screen. The on-screen display will disappear
after a few seconds.
Press the POWER button on the remote
control. It reverts to standby mode.
To switch the TV off, press the POWER
button on the set.
++Auto+program OToOOstart
Notes :
• If the programmed signal has poor quality,
memorize again in the Auto program.
• AUTO PROGRAM stores all receivable channels
regardless of receiving signal (RF, Cable).
• If channels of general wireless TV and cable TV
are duplicated, press the number buttons (0 ~ 9)
to change as .
Selecting the on screen language
Special
CH. Language
Input
Key+lock
Caption+
Tilt
Degauss
{
{
{
{
{
{
Channels of
Cable TV
Channels of general
wireless TV
Using the MENU button
Channel
Move++Next+{+Exit}
CH.
Auto+program
{
Manual program
{
Favorite+channel++ {
Auto+demo+
++++{
1. Press the MENU button and then D / E button
until the menu is displayed as shown right.
2. Press the G and then D / E button to select
Language.
3. Press the G and then use D / E button to
select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Press the MENU button to exit.
Move++Next { Exit}
+
+
1. Press the MENU button and then use D / E
button to select the channel menu.
2. Press the G and then D / E button to select
Auto program.
3. Press the G button to enter the Auto program
mode.
4. The AUTO PROGRAM starts now.
Memorizing Channels
This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
Memorizing the Channels by AUTO
PROGRAM
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
6
Memorizing the Channels by
MANUAL PROGRAM
Selecting the Channel
Press the D / E button to conveniently select the
upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select the
desired channel.
Using the MEMORY/ERASE button
You can conveniently perform MANUAL
PROGRAM using the MEMORY / ERASE button
on the remote control.
1. Press the D / E or NUMBER buttons to select
the channel number you want to memorize or
erase.
2. Press the MEMORY/ERASE button to select
Memory or Erase.
The on screen display appears as shown right.
Adjusting the Volume
Press the G button to increase the volume level or
F button to decrease the volume level.
To mute the sound, Press the MUTE button.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL F / G button.
++CATV+++95+++Memory
oVolume
_
Using the MENU
1. Press the MENU button and then use D / E
button to select the channel menu.
2. Press the G and then use D / E button to select
Manual program .
Channel
CH.
Auto+program
{
Manual
Manual program
program {
{
Favorite+channel+{
Auto+demo+
+{
To+set
Move++Next { Back}
+
+
3. Press the G button and then use D / E button to
select Channel.
4. Press the G button and then use D / E button to
select the channel number you want to memorize
or erase.
5. Press the F button and then use D / E button to
select Memory.
6. Press the G button and then D / E to select
Memory or Erase.
7. Press the F button and then use D / E button to
select Ch.name . You can make a channel
name.
8. Press the G button and then use F / G button to
select a word position and then D / E button to
enter alphabet A to Z, number 0
to 9, or blank.
9. Repeat steps 3 to 8 to memorize or erase other
channels.
10.Press the MENU button to exit.
7
15
++++++++
Various function
timer.
3. Press the G and then use D / E button to
adjust the hour.
4. Press the G and then use D / E button to
adjust the minute.
5. Press the G and then use D / E button to select
the desired channel among the memorized
channels in auto program.
6. Press the G and then use D / E button to adjust
the desired volume level.
7. Run/Hold is used to activate or deactivate
preset on/off times.
Press the G button and then use D / E button
to select Hold or Run.
8. Press the MENU button to exit.
Notes:
•If you don’t press any button within 2 hours after
turning on the TV set by ON TIMER function, the
set will be automatically switched back to standby
mode.
•TV must be in standby mode for the On timer to
work.
Timer
CH.
Clock
Clock
Off_timer
On+_timer
Auto+_off+
{
{
{
{
{
__
AM
__:__+AM
Move++Next { Back}
+
+
Setting the Clock
Before setting the on/off timer, first you should set
the current time.
1. Press the MENU button and then use D / E
button to select the Timer menu.
2. Press the G and then D / E button to select
Clock .
3. Press the G button and then press the D / E
button to adjust the hour.
4. Press the G button and then press the D / E
button to adjust the minute.
5. Press the MENU button to exit.
Setting the Sleep Time
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
Setting the OFF TIMER
This is the function to automatically switch the TV
to standby mode at a preset time.
1. Press the MENU button and then use D / E
button to select the Timer menu.
2. Press the G and then D / E button to select Off
timer.
3. Press the G button and then press the D / E
button to adjust the hour.
4. Press the G button and then press the D / E
button to adjust the minute.
5. Run/Hold is used to activate or deactivate
preset on/off times.
Press the G and then D / E button to select
Hold or Run.
6. Press the MENU button to exit.
Note:If the same time is set for the on time and off
time, only the off time operates.
---→10 →20→30 →60 →90 →120→180→240
Notes:
•After a few seconds, the desired sleep time will
disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the Sleep --mode by using the SLEEP button.
Setting the ON TIMER
This is the function to automatically turn the TV on
at a preset time and channel.
1. Press the MENU button and then use D / E
button to select the Timer menu.
2. Press the G and then D / E button to select On
8
Auto Off
Key Lock
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
The TV can be set so that the remote control is
needed to control it.
This feature can be used to prevent unauthorized
viewing.
1. Press the menu button and then use D / E
button to select the Timer menu.
2. Press the G and then D / E button to select
Auto off.
3. Press the D / E button to select On or Off.
4. Press the MENU button to exit.
Operating the degauss (some
models)
1. Press the menu button and then use D / E
button to select the Special menu.
2. Press the G and then D / E button to select
Key lock.
3. Press the G button and then D / E button to
select On or Off.
4. Press the MENU button to exit.
In this TV set the magnetic field of the earth may
influence on the color purity of picture by neighbor
magnetic substance or installation direction of the
TV set. The stripes may appear on the screen or
the color may not be equal in the corner. You can
enjoy the program in high color quality by
operating the Degauss.
Notes :
•With the key lock on, the display Key lock
appears on the screen if any button on the front
panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
1. Press the menu button and then use D / E
button to select the Special menu.
2. Press the G and then D / E button to select
Degauss.
Tilt (some models)
The picture of the set may tilt to left or right if the
set is moved to another direction. This function is
to adjust the tilt.
Special
CH. Language
{
{
{
{
{
{
{
Input
Key+lock
Caption+
Tilt+
Degauss
Degauss
1. Press the menu button and then use D / E
button to select the Special menu.
2. Press the G and then D / E button to select
Tilt.
3. Press the G button and then use F / G button to
adjust the tilt.
4. Press the MENU button to exit.
On
Off
Move++Next { Back}
+
+
3. Press the G button and then use D / E button to
select On or Off.
After the degaussing function works, On mode
switches to Off mode automatically.
4. Press the MENU button to exit.
Notes:
•Do not operate this function often because the
lifetime of CPT may be shorten.
•If you cannot adjust the screen condition by
degaussing, try it again after about 4 minutes.
9
Various function
To select the favorite channel, repeatedly press
the FCR (Favorite Channel Review) button. Eight
channels programmed appear on the screen one
by one.
Adjusting the Fine
This function is to adjust the picture to stable
condition when it is poor, for example, a horizontal
stripe, twisted picture or no color in broad-casting.
Auto Demonstration
Auto demo allows you to review all the menus
available on the TV set.
Channel
CH.
Auto+program
{
Manual
Manual program
program {
{
Favorite+channel+{
Auto+demo+
+{
To+set
1. Press the menu button and then use D / E
button to select the Channel menu.
2. Press the G button and then use D / E button
to select Auto demo.
3. Press the G button, and the demonstration
starts.
Move++Next { Back}
+
+
When the demonstration reaches the last
display, it starts again from the beginning.
To stop auto demonstration, press any button.
1. Press the MENU button and then use D / E
button to select the channel menu.
2. Press the G and then D / E button to select
Manual..
3. Press the G and then D / E button to select
Fine.
4. Press the G button to enter the Fine mode.
5. Press the F / G button to tune the desired
picture condition.
6. Press the ENTER (A) button to memorize.
7. Repeatedly press the MENU button to exit.
Notes :
•To release the memorized fine tuning, program
again the fine-tuned channel by AUTO PROGRAM
or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the color
of the channel number changes to yellow.
Favorite channel memory
Favorite channel memory is a convenient feature
that lets you quickly scan up to five channels of
your choice without having to wait for the TV to
scan through all the in-between channels.
1. Press the MENU button and then use D / E
button to select the Channel menu.
2. Press the G and then D / E button to select
Favorite channel.
3. Press the G button and then use D / E button
to select a favorite channel position.
4. Use the F / G button to select the desired
channel number.
5. Repeat steps 3 to 4.
6. Press the MENU button to exit.
10
Picture control
picture levels (Contrast, Brightness, Color,
Sharpness, Tint) of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item Tint is not displayed.
Auto Picture Control
You can select picture modes programmed at
factory as you prefer.
Using the APC button
1. Press the MENU button and then use D / E
button to select the Picture menu.
2. Press the G and then D / E button to select the
desired picture mode.
3. Press the G button.
4. Press the F / G button to adjust the level.
The level of displayed is adjusted.
5. Press the MENU button to exit.
1. Press the APC button.
2. Press the APC button to select Clear,
Optimum, Soft or User.
3. Press the ENTER(A) button to exit.
Using the MENU button
1. Press the MENU button and then use D / E
button to select the Picture menu.
2. Press the G and then D / E button to select
APC.
XD (some models)
Picture
APC
CH. +APC
++{
XD
{
Contrast
{
+{
Brightness
Color ++++++++{
Sharpness
+{
Tint
+{
XD is LG Electronic’s unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Clear
Optimum
Soft
User
1. Press the menu button and then use D / E
button to select the Picture menu.
2. Press the G and then D / E button to select
XD.
3. Press the G button and then D / E button to
select On or Off.
4. Press the MENU button to exit.
++++++
Move++Next { Back}
+
+
3. Press the G button to enter the APC mode.
4. Press the D / E button to select Clear,
Optimum, Soft or User.
5. Press the MENU button to exit.
Note : When selecting APC options (Clear,
Optimum and Soft), XD is automatically
change to On.
Adjusting the Picture
This is the function to manually adjust the desired
Sound control
broadcast is only in Mono; even though STEREO
or SAP has been selected.
• Select MONO if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.
Enjoying the Stereo/SAP Broadcast
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate
in the video mode.
Using the MTS Button
1. Press the MTS button to select your desired
MTS mode.
Each time you press this button, the MONO,
STEREO or SAP mode appears in turn.
2. Press the ENTER (A) button to exit.
Notes:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected STEREO or SAP.
• Mono sound is automatically received if the
11
Sound control
Auto Sound Control
X-WAVE (some models)
You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select XWAVE.
3. Press the G and then D / E button to select
Set Frequency.
4. Press the G button to tune in a frequency on
the X-wave menu.
5. Use the number 0 to 9 or press the F / G button
to match the TV’s frequency and the FM
receiver’s.
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then the D / E button to select
DASP.
Sound
CH.
DASP
DASP
Turbo+Sound
AVL
Balance
++++{{
{
{
{
Flat
Music
Movie
Sports
User
{
Note:
1. If the reception is poor or weak, select a
different frequency.
2. For best results, there should be no more that
19ft between the TV and FM Receiver.
3. In certian areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
4. The reception sensitivity may depend on the
kinds of receiver (FM radio).
Move++Next { Back}
+
+
3. Press the G and then the D / E button to select
Flat, Music, Movie, Sports or User.
4. Press the MENU button to exit.
Turbo Sound (some models)
AVL (Auto Volume Leveler)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
\Using the MENU Button
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
Turbo Sound.
3. Press the G and then D / E button to select On
or Off.
4. Press the MENU button to exit.
AVL automatically keeps on an equal volume level
even if you change channels.
Using the MENU Button
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
AVL.
3. Press the G and then D / E button to select On
or Off.
4. Press the MENU button to exit.
Adjusting the equalizer
(User mode in Auto Sound
Control)
Adjusting the balance
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
Balance.
3. Press the G and then F / G button to adjust the
balance level.
4. Press the MENU button to exit.
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
DASP.
3. Press the G and then D / E button to select
User, then press G button to enter the User
mode.
4. Press the F / G button to select the sound band
and then press the D / E button to adjust the
desired level.
5. Press the MENU button to exit.
Adjusting the DBS (Dynamic
Bass Sound)(some models)
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
DBS.
3. Press the G and then D / E button to adjust the
DBS level.
4. Press the MENU button to exit.
12
Closed caption function
Closed captioning is a process which converts the
audio portion of a television program into written
words, which then appear on the television screen
in a form similar to subtitles. Closed captions allow
viewers to read the dialogue and narration of
television programs.
and follows two paths. One is the direct path
and the other is reflected off tall buildings, hills
or other objects. Changing the direction or
position of the antenna may improve reception.
Using Closed Captions
Captions are the subtitles of the dialogue and
narration of television programs. For prerecorded
programs, program dialogue can be arranged into
captions in advance. It's possible to caption a live
program by using a process called “real-time
captioning”, which creates captions instantly.
Real-time captioning is normally done by
professional reporters using a machine shorthand
system and computer for translation into English.
Captioning is an effective system for the hearingimpaired, and it can also aid in teaching language
skills.
• The picture at left shows a typical caption.
A
SNOW:
If your receiver is located at the weak, fringe
area of a TV signal, your picture may be marred
by small dots. It may be necessary to install a
special antenna to improve the picture.
2 An old, bad or illegally recorded tape is played.
3 Strong, random signals from a car or airplane
interfere with the TV signal.
4 The signal from the antenna is weak.
5 The program wasn't captioned when it was
produced, transmitted or taped.
Caption Tips
Using the Text Function
FOLLOW ME
Text services give a wide variety of information on
all kind of subjects (ex. captioned program lists,
weather forecasts, stock exchange topics, news
for hearing-impaired---) through the full TV screen.
But not all stations offer text services, even though
they might offer captioning.
• Not all TV broadcasts include closed caption
signals.
• Sometimes TV stations broadcast two different
caption signals on the same channel. By
selecting MODE 1 or MODE 2, you can choose
which signal you view. MODE 1 is usually the
signal with the captions, while MODE 2 might
show demonstration or programming
information.
• Your TV might not receive caption signals
normally in the following situations.
Note: In the event you receive a poor signal, an
empty black box may appear and
disappear, even when the text mode is
selected. This is normal function in such an
event.
Operating the Caption and Text
Using the CAPTION button
1 Poor reception conditions are encountered:
A IGNITION:
Picture may flutter, drift, suffer from black spots
or horizontal streaking. Usually caused by
interference from automobile ignition systems,
neon lamps, electrical drills and other electrical
appliances.
A
1. Press the CAPTION button.
2. Press the CAPTION button to select OFF ,
Mode 1, Mode 2, Text 1 or Text 2.
3. Press the ENTER (A) button to exit.
Using the MENU button
1. Press the MENU button and then use D / E
button to select the Special menu.
2. Press the G and then D / E button to select
Caption.
3. Press the G button and then use D / E button
to select Off, Mode 1, Mode 2, Text 1 or Text
2.
4. Press the MENU button to exit.
Note: This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
GHOSTS:
Ghosts are caused when the TV signal splits
13
PIP function (Some models)
Watching the PIP (Picture in
Picture)
This is the function to call up a little picture (PIP :
picture in picture) within the main picture. Thus at
the same time you can watch two different
programs.
1. Press the PIP/DW button to select PIP mode or
double window mode. Repeatedly press the
PIP/DW button to select the desired sub picture
size.
PIP [M]
PIP [S]
PIP off
PIP [L] : DW
24
Moving the Sub Picture
(in PIP mode)
Press the POSITION button to select the desired
position of sub picture.
2. Press the CH +/- button of the PIP buttons to
select the desired channel in the sub picture.
Swapping Screens
Notes:
•Press the D / E button to select the upper or
lower channel in main picture and press the CH
+/- button of the PIP buttons to select the upper
or lower channel in sub picture.
• 4:3 and Zoom don’t operate in PIP [L] mode.
Press the SWAP button.
Each time you press this button, the main picture
and sub picture exchange places.
Still Picture
Selecting the input signal (in PIP
and Double window mode)
Press the STILL button.
The still picture is displayed.
In PIP mode, the still picture is displayed in the
sub picture.
Using the PIP MENU Button
1. Press the PIP MENU button.
2. Press the D / E button to select Input.
3. Press the G and then use D / E button to
select TV, AV 1, AV 2, AV 3.
4. Press the VOLUME (F) button to exit.
To cancel the still picture, press the STILL button
again.
Press the MAIN STILL button. In PIP mode, the
still picture is displayed in the main picture.
To cancel the still picture, press the
MAIN STILL button again.
Using the MENU Button
1. Press the MENU button and then use D / E
button to select the Special menu.
2. Press the G and then use D / E button to select
the PIP input.
3. Press the G and then use D / E button to select
the TV, AV 1, AV 2, AV 3.
4. Press the F button to exit.
Channel Search
Still picture
This is the function to search one by one the
pictures of all the programmed channels through
the PIP screen while the main screen remains as
a current channel.
< Double window mode >
Press the CH. SEARCH button.
The pictures of all the programmed channels are
searched through one PIP screen.
To release the channel search, press the CH.
SEARCH.
Note: By pressing the SWAP button, you can see
the channel being searched on the PIP
screen through the main screen.
Still picture
< PIP mode >
14
Connection of external equipment (some models)
Combination
VHF/UHF Antennas
300 ohm
Flat Wire
antenna connection as described below.
1.
300 to 75 ohm
Adapter
75 ohm
Antenna Jack
from cable TV source
75 ohm
Antenna
Jack
300 to 75
ohm Adapter
75 ohm CATV Cable
2.
TV rear
75 ohm
Coaxial
Cable
1. Remove the 300 to 75 ohm adapter or the cable
from the set if attached.
2. Connect the CATV cable (75 ohm coaxial
cable) to the 75 ohm antenna jack.
75 ohm
CATV Cable
connection of additional equipment
You can connect additional equipment, such as
VCRs, camcorders etc. to your set.Here shown
may be somewhat different from your set.
These are an example drawing of typical jack
layout.
1. IN 1 JACKS : Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select AV1.
2. IN 2 JACKS : Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select AV2.
3. IN 3 JACKS : Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select AV3.
4. OUT JACKS: Connect external equipment
inputs (VCR, Audio amplifier) to these outputs
for recording or monitering the selected
program.
Note:This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
300 ohm Flat Wire
300 to 75
ohm Adapter
Connecting an Outdoor Antenna
For the best reception, we recommend you use an
outdoor antenna.
Severely weathered antennas and antenna cables
can reduce the signal quality. Before connecting it,
necessarily inspect them. Any service center can
explain the various outdoor antennas available to
you.
COMPONENT
4
VIDEO (L/MONO)AUDIO(R)
IN1
VIDEO
L/MONO AUDIO
If you subscribe to a CATV system, change the
15
VIDEO
2
(L/MONO) AUDIO(R)
IN2
R
3
AV IN 3
3
Connecting a CATV Cable
PR
DVD IN(480i)
VIDEO L/MONO AUDIO R
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to screws on the 1
300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
into 75 ohm antenna jack.
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to the
75 ohm antenna jack.
PB
Y
OUT
AV IN 3
back of TV (or IN 3 jacks on the side of TV ).
2. Connect the input jacks of the recording VCR to
the OUT (A/V) jacks on the back of TV.
3. Press the TV/VIDEO button to select AV-1 or
AV-2.
Connecting AUDIO/VIDEO IN Jacks
VIDEO (L/MONO)AUDIO(R)
IN1
< TV >
VIDEO L/MONO AUDIO R
OUT
If you connect it to the IN 3 (A/V) jacks on the
side of TV, you should select AV-3.
4. Press the PLAY button on the playback VCR
and set the recording VCR to record.
AV IN 3
< TV >
< Playback VCR >
1. Connect the audio/video output jacks of the VCR to
IN 1 or IN 2(A/V) jacks on the side or back of TV.
If you connect the audio jack only, you can't hear the
sound from the TV.
OUT
< Recording VCR >
VIDEO (L/MONO)AUDIO(R)
2. Press the TV/VIDEO button to select AV1 or AV2.
Note: In some stereo models, if you connect the
audio/video output jacks of the VCR to the AV
AV IN 3(A/V) jacks on the front or side of TV,
select AV3.
IN1
< TV >
< Recording VCR >
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
Note: In case of MONO VCR, connect the output
jack of VCR to the AUDIO L/MONO IN jack
of TV so that the sound can be heard from
both speakers. If you connect it to the
AUDIO R IN jack of TV the sound is heard
only from right speaker.
< TV >
VCR Recording
(some models)
OUT
Note: In some mono models, when the input jacks
on the front panel and back panel are connected to
external equipments at the same time, the input jacks
on the front panel have priority over the
input jacks on the back panel of the TV.
VIDEO (L/MONO)AUDIO(R)
IN1
1. Connect the audio/video input jacks of the recording
VCR to the OUT (A/V) jacks on the back.
2. Select the program number on the TV.
3. Set the recording VCR to record.
Recording a program from connected other equipment
(some models)
< Playback VCR >
1. Connect the output jacks of the playback VCR
to the IN 1 or IN 2 (A/V) jacks on the side or
16
• Connect component video inputs to Y, P B ,
PR(480i) and audio IN2 to audio(L/R) ports.
Note:
• Note: This TV is programmed to remember
which mode it was last set to, even if you turn the
TV off.
TV INPUT
Y
DV D OUTPUT
Y
Y
Y
Y
1.How to connect
PB
PR
Cb Cr
B -Y R -Y
Pb Pr
PB PR
COMPONENT
Y
PB
PR
2.How to use
DVD IN (480i)
VIDEO
(L/MONO) AUDIO(R)
• Turn the set on and press the TV/VIDEO button
on the remote control or TV/VIDEO button on the
front panel to select COMPONENT.
•Try this after turning on the DVD set.
IN2
< TV connection panel >
Y
PB
PR
(R) AUDIO (L)
< Back panel of DVD >
17
NOTE
18
Troubleshooting check list
SYMPTOMS
No power
No picture or sound
Poor picture but good sound
Poor reception
Lines in picture
Ghosts (multiple images)
Remote control does not work.
Cannot tune desired channel.
CHECK THESE THINGS
Is power cord plugged in?
Is television turned on?
Check batteries in remote control.
Try another channel (station trouble).
Check antenna connectings.
Check for local interference.
Adjust the antenna.
Adjust the picture control.
Program channel using AUTO
PROGRAM.
19
Download PDF