LG | 29SA1RL | LG 29SA1RL Owner’s Manual

OWNER'S MANUAL
Colour Television
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
P/NO.:MFL66919802-EN(CW91A,1009-REV00)
www.lg.com
Safety Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR
BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
bottom are provided for ventilation, and to insure
Cleaning
reliable operation of the television receiver, and to
Unplug this television receiver from the wall outlet
protect it from overheating. These openings must
before cleaning. Do not use liquid cleaners or
not be blocked or covered. The openings should
aerosol cleaners. Use a damp cloth for cleaning.
never be blocked by placing the television receiver
Do not use attachments not recommended by the
on a bed, sofa, rug, or other similar surface. This
television receiver manufacturer as they may
television receiver should not be placed in a builtcause hazards.
in installation such as a bookcase unless proper
Power Supply
ventilation is provided.
This television receiver should be operated only
It is recommended not to operate this unit near
from the type of power source indicated on the
speakers or big metallic furnitures in order to keep
marking label. If you are not sure of the type of
their magnetism from disturbing colors purity
power supplied to your home, consult your
(uniformity) on the screen.
television dealer or local power company.
Wet Location Marking
Press the POWER button on the front panel or
Apparatus shall not be exposed to dripping or
side panel to turn off the TV when the TV set is
splashing and no objects filled with liquids, such
not being used for a long time.It is recommended
as vases, shall be placed on the apparatus.
to remove the plug from the wall outlet (Power point)
Use
Do not allow anything to rest on the power cord.
Do not locate this television receiver where the
cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Never push objects of any kind into this television
receiver through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock.
Never spill liquid of any kind on the television
receiver.
Disconnecting device from mains
Power plug is the disconnecting device. The plug
must remain readily operable.
Installation
Do not use this television receiver near water, for
example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, etc.
Do not place this television receiver on an
unstable cart, stand, or table. The television
receiver may fall, causing serious injury to a child
or an adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the
manufacturer, or sold with the television receiver.
Wall or shelf mounting should follow the manufacturer's instructions and should use a mounting
kit approved by the manufacturer.
Slots and openings in the cabinet and the back or
Service
Do not attempt to service this television yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified personnel.
Date of Purchase
Dealer Purchased from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Writing Model And Serial Numbers
The serial number and model number are found
on the back of this unit. The serial number is
unique to this unit. You should record requested
information here and retain this guide as a
permanent record of your purchase. Please retain
your purchase receipt as your proof of purchase.
CONTENTS
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
? ?@@@f?
?
??@@@f?
?
?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?@@@f?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Closed caption function..........................8
Connection of external equipment
(some models)........................................9
Troubleshooting check list....................11
Description of controls
3
On screen menus.....................................4
Basic TV operation ..................................5
Various function ......................................6
Picture control .........................................7
Sound control(some models)..................7
2
Description of controls
2
3
4
9. SLEEP BUTTON
To set the desired sleep time.
10. FCR/ BUTTON (some models)
To select the favorite channel.
11.MEMORY/ERASE BUTTON (some models)
To memorize or erase the desired channel.
12.CAPTION BUTTON (some models)
To select the CAPTION mode.
13. TV/VIDEO BUTTON
To select TV, VIDEO or COMPONENT mode.
14. EYE/ BUTTON (some models)
To switch on or off eye picture.
: No function.
15. PICTURE/ BUTTON(some models)
To display picture modes one by one.
16. MTS/ BUTTON (some models)
To listen to the MTS sound.
1
11
12
5
13
6
7
8
9
10
FCR/
MTS/
/
Fitting Batteries in the Remote Control Unit
• Open the battery compartment cover on the back
side and insert the batteries with correct polarity.
• Apply 1.5V batteries of AAA type. Don’t mix the
used batteries with new batteries.
14
15
16
1. POWER BUTTON (or ON/OFF)
Refer to "Turning on/off the TV".
2. MUTE BUTTON
To mute the sound. Again to restore the
muted sound.
3. A. PROG (Auto program) BUTTON (some
models)
To memorize channels by AUTO PROGRAM.
4. APC (Auto Picture Control) BUTTON
(some models)
To adjust the factory preset pictures
corresponding to the lighting around.
5. NUMBER BUTTONS (some models)
To select the desired channel directly.
6. MENU BUTTON
To display on screen menus.
7. CH UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when
menu is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
OK (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote
control only).
8. REVIEW BUTTON (some models)
To return to the previous channel.
or
Front panel
-
3
POWER BUTTON (or ON/OFF)
Refer to "Turning on/off the TV".
REMOTE CONTROL SENSOR
STAND BY INDICATOR
Illuminates red when the TV is in standby
mode. Refer to "Turning on/off the TV".
TV/VIDEO BUTTON(some models)
To select TV, VIDEO or COMPONENT mode.
MENU BUTTON
To display on-screen.
CHANNEL UP/DOWN (D / E) BUTTONS
• To select the desired channel.
• To select the desired menu item when menu
is displayed on the screen.
VOLUME UP/DOWN (F / G) BUTTONS
• To increase or decrease volume level.
• To enter or adjust the selected menu when
menu is displayed on the screen.
OK (A) BUTTON
• To exit from the displayed menu.
• To memorize the adjusted menu.
• To recall the current TV mode (by remote
control only).
On screen menus
select a menu item.
3.Change the setting of an item in the sub or pulldown menu withF / G or D / E.You can move to
the higher level menu with MENU button and to
move to the lower level menu press the
OK (A) or G button.
The dialogue between you and your set takes place
on screen with an operator menu .The buttons
required for the operating steps are also displayed.
Menu selection
1.Press the MENU button and then D / E button to
display each menu.
2.Press the G button and then D / E button to
Picture
Channel
CH. Auto+program
Channel
Memory +++
Fine++
++++:+clear
CH. APC
XD
++:+On
Contrast
++:+100
Brightness
++:+60
Color ++++++++++:+60
Sharpness
++:+60
Tint
++:+0
++++:+To+start
++++:+TV+1
++++:+Off
++++:+0
}+{++OK++MENU
}+{++OK++MENU
Timer
Sound
CH. Clock
++++:+__:__+AM
Off_timer
++++:+__:__+AM
On+_timer
++++:+__:__+AM
On+_time+_volume :+30
Auto+_Off
++++:+On
CH. DASP
+++++:+Flat
Turbo+sound
++++:+On
AVL
++++:+Off
Balance
++++:+0
Equalizer+Setting+:+To+Start
+
}+{++OK++MENU
CH.
Special
Language
Input
Key+lock
Caption
Energy+Saving
}+{++OK++MENU
}+{++OK++MENU
:+English
:+TV
:+Off
:+Off
:+Off
TV programme
4
Basic TV operation
If you want to stop auto programming, press the
OK (A) button.
Only the channels searched up to that time are
memorized.
Note :
• If the programmed signal has poor quality,
memorize again in the Auto program.
• AUTO PROGRAM stores all receivable channels
regardless of receiving signal (RF, Cable).
• If channels of general wireless TV and cable TV
are duplicated, press the number buttons (0 ~ 9)
to change as .
Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
may be different from your TV’s because it is just
an example to help you with the TV operation.
Turning on/off the TV
Press the POWER (or ON/OFF) button on
the set. At this time, the set switches to
standby mode and the standby indicator
lights up in red.
To switch the TV on from standby mode,
press the TV/VIDEO, CH D / E button on
the set or POWER, TV/VIDEO, CH D / E or
number button on the remote control.
A channel number will be displayed on the
screen. The on-screen display will disappear
after a few seconds.
Press the POWER button on the remote
control. It reverts to standby mode.
To switch the TV off, press the POWER
button on the set.
Channels of general
wireless TV
Channels of
Cable TV
Using the MENU button
1.Press the MENU button and then use D / E
button to select the channel menu.
2.Press the G and then D / E button to select
Auto program.
3.Press the G button to enter the Auto program
mode.
4.The AUTO PROGRAM starts now.
5. Press the OK (A) button to stop.
Selecting the on screen language
1. Press the MENU button and then D / E button
to select the Special menu.
2. Press the G and then D / E button to select
Language.
3. Use F / G button to select the desired
language.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Press the MENU button to exit.
Selecting the Channel
Memorizing Channels
Press the G button to increase the volume level or
F button to decrease the volume level.
To mute the sound, Press the MUTE button.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL F / G button.
Press the D / E button to conveniently select the
upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select the
desired channel.
Adjusting the Volume
This is the function to memorize all the active
channels in your area before you can use the TV.
It is called AUTO PROGRAM .
In AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
Memorizing the Channels by AUTO
PROGRAM
AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
select the desired channel with the D / E buttons.
Using the A.PROG button
You can conveniently perform AUTO PROGRAM
using the A.PROG button on the remote control.
1. Press the A.PROG button.
2. The AUTO PROGRAM starts now.
5
Various function
Setting the Clock
Auto Off
Before setting the on/off timer, first you should set
the current time.
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
Setting the OFF TIMER
Key Lock
This is the function to automatically switch the TV
to standby mode at a preset time.
Note:If the same time is set for the on time and off
time, only the off time operates.
The TV can be set so that the remote control is
needed to control it.This feature can be used to
prevent unauthorized viewing.
Note :
•With the key lock on, the display Key lock
appears on the screen if any button on the front
panel is pressed while viewing the TV.
•This is programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
Setting the ON TIMER
This is the function to automatically turn the TV on
at a preset time.
Note:
•If you don’t press any button within 2 hours after
turning on the TV set by ON TIMER function, the
set will be automatically switched back to standby
mode.
•TV must be in standby mode for the On timer to work.
Adjusting the Fine
This function is to adjust the picture if poor signal
received from broadcasters causing horizontal
stripe, twisted picture, no color, and/or noise.
1. Press the MENU button and then D / E button
to select the channel menu.
2. Press the G and then D / E button to select
Fine.
3. Press the F / G button to tune the desired
picture condition.
4. Press the OK (A) button to memorize.
5. Repeatedly press the MENU button to exit.
Notes :
•To release the memorized fine tuning, program
again the fine-tuned channel by AUTO PROGRAM.
•If the finely tuned channel is memorized, the color
of the channel number changes to yellow.
Setting the ON TIME VOLUME
In this function, you can set the volume of the TV
antomatically tuning on.
Setting the Sleep Time
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
---→10 →20→30 →60 →90 →120→180→240
Energy saving (some models)
Setting energy saving to on, the screen will be dark,
and then exit from main menu, the Energy saving
OSD will be displayed .
Notes:
1.About after 10s, this OSD will disappear, TV enter
energy saving mode.
2.In energy saving mode ,the local key can make
TV return to normal mode ,even though key lock is
set to ON.
Notes:
•After a few seconds, the desired sleep time will
disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the Sleep --mode by using the SLEEP button.
6
Picture control
Sharpness, Tint) of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N and Component mode, the picture item
Tint is not displayed.
Auto Picture Control
You can select picture modes programmed at
factory as you prefer.
Using the APC button(some models)
XD (some models)
1. Press the APC button.
2. Press the APC button to select Clear,
Optimum, Soft or User.
3. Press the MENU(A) button to exit.
XD is LG Electronic’s unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Adjusting the Picture
This is the function to manually adjust the desired
picture levels (Contrast, Brightness, Color,
Sound control (some models)
Enjoying the Stereo/SAP Broadcast
(some models)
Adjusting the balance
1. Press the MENU button and then use D / E
button to select the Sound menu.
2. Press the G and then D / E button to select
Balance.
3. Press the G and then F / G button to adjust the
balance level.
4. Press the MENU button to exit.
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate
in the video mode.
Adjusting the Equalizer Setting
(some models)
Using the MTS Button
1. Press the MTS button to select your desired
MTS mode.
Each time you press this button, the MONO,
STEREO or SAP mode appears in turn.
2. Press the ENTER (A) button to exit.
Note:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected STEREO or SAP.
• Mono sound is automatically received if the
broadcast is only in Mono; even though STEREO
or SAP has been selected.
• Select MONO if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.
0.110.511.515.01101KHZ
Note:
In some models,the Equalizer setting will not
display,but there will be Treble,Bass.
Turbo Sound (some models)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
Auto Sound Control
You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level
even if you change channels.
7
Closed caption function
Closed captioning is a process which converts the
audio portion of a television program into written
words, which then appear on the television screen
in a form similar to subtitles. Closed captions allow
viewers to read the dialogue and narration of
television programs.
1. Press the MENU button and then use D / E
button to select the Special menu.
2. Press the G and then D / E button to select
Caption.
3. Press the G button and then use F / G button
to select Off , Mode 1 , Mode 2 , Text 1 or
Text 2.
4. Press the MENU button to exit.
Using Closed Captions
Note:This TV is programmed to remember
which mode it was last set to, even if you turn
the TV off.
Captions are the subtitles of the dialogue and
narration of television programs. For prerecorded
programs, program dialogue can be arranged into
captions in advance. It's possible to caption a live
program by using a process called “real-time
captioning”, which creates captions instantly.
Real-time captioning is normally done by
professional reporters using a machine shorthand
system and computer for translation into English.
Captioning is an effective system for the hearingimpaired, and it can also aid in teaching language
skills.
• The picture at left shows a typical caption.
FOLLOW ME
Caption Tips
• Not all TV broadcasts include closed caption
signals.
• Sometimes TV stations broadcast two different
caption signals on the same channel. By
selecting MODE 1 or MODE 2, you can choose
which signal you view. MODE 1 is usually the
signal with the captions, while MODE 2 might
show demonstration or programming
information.
• Your TV might not receive caption signals
normally in the following situations.
Operating the Caption
Using the CAPTION button
1. Press the CAPTION button.
2. Press the CAPTION button to select OFF ,
Mode 1, Mode 2, Text 1 or Text 2.
3. Press the ENTER (A) button to exit.
Using the MENU button
8
Connection of external equipment (some models)
If the VCRs are connected to Video 2(option) and
Side AV(option) at the same time, only the Side
AV program will be displayed.
Connecting an Outdoor Antenna
For the best reception, we recommend you use an
outdoor antenna.
Severely weathered antennas and antenna cables
can reduce the signal quality. Before connecting it,
necessarily inspect them. Any service center can
explain the various outdoor antennas available to
you.
Note:Rod Antenna Sold Seperately.
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks of the VCR to
IN 1 or IN 2(A/V) jacks on the side or back of TV.
2. Press the TV/VIDEO button to select Video1 or
Video2 .
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
Note: In case of MONO VCR, connect the output
jack of VCR to the AUDIO L/MONO IN jack
of TV so that the sound can be heard from
both speakers. If you connect it to the
AUDIO R IN jack of TV the sound is heard
only from right speaker.
Side AV jack can not support AUDIO
L/MONO IN fuction.
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to screws on the
300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
into 75 ohm antenna jack.
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to the
75 ohm antenna jack.
Connecting a CATV Cable
VCR Recording(some models)
If you subscribe to a CATV system, change the
antenna connection as described below.
Note: In some mono models, when the input jacks
on the front panel and back panel are connected to
external equipments at the same time, the input jacks
on the front panel have priority over the
input jacks on the back panel of the TV.
1. Remove the 300 to 75 ohm adapter or the cable
from the set if attached.
2. Connect the CATV cable (75 ohm coaxial
cable) to the 75 ohm antenna jack.
1. Connect the audio/video input jacks of the recording
VCR to the OUT (A/V) jacks on the back.
2. Select the program number on the TV.
3. Set the recording VCR to record.
connection of additional equipment
You can connect additional equipment, such as
VCRs, camcorders etc. to your set.Here shown
may be somewhat different from your set.
This is an example drawing of typical jack layout.
Recording a program from connected other equipment
(some models)
1. IN 1 JACKS : Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select Video 1.
2. IN 2 JACKS : Connect external equipment
outputs (VCR, LASER DISC, CAMCORDER) to
these inputs. Press the TV/VIDEO button to
select Video 2 (option).
3.OUT JACKS: Connect external equipment
inputs (VCR, Audio amplifier) to these outputs
for recording or monitering the selected
program.
1. Connect the output jacks of the playback VCR
to the IN 1 or IN 2 (A/V) jacks on the side or
back of TV.
2. Connect the input jacks of the recording VCR to
the OUT (A/V) jacks on the back of TV.
3. Press the TV/VIDEO button to select Video 1
or Video 2.(option)
4. Press the PLAY button on the playback VCR
and set the recording VCR to record.
Note:
This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
9
Connecting DVD player
• Connect component video inputs to Y, PB,
PR(480i) and audio IN2(or IN1) to audio(L/R) ports.
2.How to use
Note: This TV is programmed to remember which
mode it was last set to, even if you turn the TV off.
• Turn the set on and press the TV/VIDEO button
on the remote control or TV/VIDEO button on the
front panel to select COMPONENT.
•Try this after turning on the DVD set.
1.How to connect
TV INPUT
Y
DV D OUTPUT
Y
Y
Y
Y
PB
PR
Cb Cr
B -Y R -Y
Pb Pr
PB PR
10
Troubleshooting check list
SYMPTOMS
No power
No picture or sound
Poor picture but good sound
Poor reception
Lines in picture
Ghosts (multiple images)
Remote control does not work.
Cannot tune desired channel.
CHECK THESE THINGS
Is power cord plugged in?
Is television turned on?
Check batteries in remote control.
Try another channel (station trouble).
Check antenna connectings.
Check for local interference.
Adjust the antenna.
Adjust the picture control.
Program channel using AUTO
PROGRAM.
11
Download PDF