LG | 32LE5300 | LG 32LE5300 Owner’s Manual

OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
The model and serial number of the TV is located
on the back and/or one side of the TV.
Record it below should you ever need service.
LED LCD TV MODELS
19LE5300 32LE5300
22LE5300 37LE5300
26LE5300 42LE5300
22LE5500 47LE5300
26LE5500 55LE5300
42LE7300
47LE7300
55LE7300
42LE530C
47LE530C
55LE530C
MODEL
SERIAL
P/NO :MFL62882739 (1010-REV02)
LCD TV MODELS
32LD420 32LD450
42LD420 37LD450
47LD420 42LD450
47LD450
37LD450C
42LD450C
47LD450C
32LD520 42LD630
42LD520 47LD630
47LD520 55LD630
55LD520
55LD520C
www.lg.com
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
2
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
9
Heed all warnings.
Follow all instructions.
1
Do not use this apparatus
near water.
2
Clean only with dry cloth.
3
Do not block any ventilation
openings. Install in accordance
with
the
manufacturer’s
instructions.
4
Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
5
Protect the power cord from
being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the
apparatus.
6
Only use attachments/accessories specified by the manufacturer.
7
Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.
8
Unplug this apparatus during
lighting storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
10
Never touch this apparatus or antenna during a thunder or lighting storm.
11
When mounting a TV on the wall, make sure
not to install the TV by the hanging power
and signal cables on the back of the TV.
12
Do not allow an impact shock or any objects
to fall into the product, and do not drop
onto the screen with something.
13
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or
damaged or cracked wire insulation are
dangerous . Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized
servicer. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where the
cord exits the appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug
when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
3
SAFETY INSTRUCTIONS
14
15
16
WARNING - To reduce the risk
of fire or electrical shock, do not
expose this product to rain,
moisture or other liquids. Do
not touch the TV with wet
hands. Do not install this product near flammable objects
such as gasoline or candles or
expose the TV to direct air
conditioning.
Do not expose to dripping or
splashing and do not place
objects filled with liquids, such
as vases, cups, etc. on or over
the apparatus (e.g. on shelves
above the unit).
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV with
a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If
grounding methods are not possible, have a
qualified electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
4
17
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
18
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
19
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may
occur. Do not clean with chemicals such as
alcohol, thinners or benzene.
20
Moving
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press against or put
stress on the front panel of the TV.
21
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
22
Take care not to touch the ventilation openings. When watching the TV for a long
period, the ventilation openings may
become hot.
23
If you smell smoke or other odors coming
from the TV, unplug the power cord and contact and authorized service center.
24
Do not press strongly upon the
panel with hand or sharp object
such as nail, pencil or pen, or
make a scratch on it.
25
Keep the product away from direct sunlight.
26
Dot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to
six million pixels. In a very few cases, you
could see fine dots on the screen while
you’reviewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
27
Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal deformation
is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies
depending on the product.
This generated sound does not affect the
performance and reliability of the product.
28
For LED LCD TV/LCD TV
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor’s performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not
dispose of this product with general household waste. Disposal of this product must be
carried out in accordance to the regulations of
your local authority.
5
CONTENTS
WARNING / CAUTION ............................... 2
SAFETY INSTRUCTIONS
Important Safety Instructions.............................. 3
FEATURE OF THIS TV ................................ 8
PREPARATION
Accessories .............................................................9
Front Panel Information ..................................... 11
Back Panel Information .....................................16
Stand Instructions ...............................................20
VESA wall mounting .........................................28
Cable Management ..........................................30
Desktop Pedestal Installation .........................32
Swivel Stand ........................................................32
Kensington Security System ..........................32
Attaching the TV to a Desk ............................33
Securing the TV to the Wall to Prevent Falling
when the TV is used on a stand ...................34
Antenna or Cable Connection .......................35
EXTERNAL EQUIPMENT SETUP
HD Receiver setup .............................................36
DVD setup ............................................................39
VCR SETUP .......................................................... 41
Other A/V Source Setup .................................42
USB Connection ................................................43
Headphone Setup ............................................43
Audio out Connection ......................................44
PC Setup ..............................................................45
WATCHING TV / CHANNEL CONTROL
Remote Control Functions ..............................52
Turning on the TV ..............................................54
Channel Selection..............................................54
Volume Adjustment ..........................................54
Initial Setting .......................................................55
On-Screen Menus Selection .......................... 57
Quick menu .........................................................59
6
Customer Support
- Picture Test / Sound Test ...........................60
- Product/Service Info. ...................................... 61
Simple Manual ....................................................62
Channel Setup
- Auto Scan (Auto Tuning)..............................63
- Add/Delete Channel (Manual Tuning) .....64
- Channel Editing ...............................................65
Favorite Channel Setup ....................................66
Favorite Channel List ........................................66
Channel List ........................................................ 67
Channel Information .........................................68
Channel Brief Information ............................... 69
Input List .............................................................. 70
Input Label............................................................ 71
Reset to factory default (Initial Setting) ...... 72
Mode Setting ...................................................... 73
Demo Mode ........................................................ 74
AV Mode ............................................................... 75
SIMPLINK............................................................. 76
MY MEDIA
Connection Method .......................................... 78
Entry Mode .......................................................... 79
Movie List ............................................................ 80
Photo List ............................................................. 87
Music List .............................................................93
DivX Registration Code ....................................98
Deactivation .........................................................99
PICTURE CONTROL
Picture Size (Aspect Ratio) Control............100
Picture Wizard ................................................... 102
ꕊ Energy Saving ............................................ 104
Preset Picture Settings (Picture mode)..... 105
Manual Picture Adjustment - User Mode 106
Picture Improvement Technology (Advanced
Control) ................................................................107
Expert Picture Control ....................................108
Picture Reset ........................................................111
Power Indicator ....................................................111
TruMotion ............................................................ 112
SOUND & LANGUAGE CONTROL
Auto Volume....................................................... 113
Clear Voice II ...................................................... 114
Balance ................................................................ 115
Preset Sound Settings (Sound Mode) ....... 116
Sound Setting Adjustment - User Mode ...117
Audio Reset ........................................................ 118
TV Speakers On/Off Setup ........................... 119
External Speakers On/Off Setup ................. 119
Stereo/SAP Broadcast Setup ...................... 120
Audio Language .............................................. 121
On-screen Menus Language Selection .... 122
Caption Mode
- Analog Broadcasting System Captions . 123
- Digital Broadcasting System Captions ... 124
- Caption Option .............................................. 125
APPENDIX
Troubleshooting ................................................ 142
Maintenance ...................................................... 145
Product Specifications ................................... 146
IR Code................................................................ 151
External Control through RS-232C ........... 152
Open Source Software Notice ..................... 158
TIME SETTING
Clock Setting
- Auto Clock Setup ......................................... 126
- Manual Clock Setup .....................................127
Auto On/Off Time Setting ............................ 128
Sleep Timer Setting ........................................ 129
PARENTAL CONTROL / RATINGS
Set Password & Lock System
- Setting up Your Password .......................... 130
- Set Password .................................................. 131
- Lock System................................................... 132
Channel Blocking ............................................. 133
Movie & TV Rating .......................................... 134
Downloadable Rating ...................................... 139
External Input Blocking .................................. 140
Key Lock .............................................................. 141
7
FEATURE OF THIS TV
ꔛ
Some of these features are not available on all models.
High-definition
television.
Highresolution digital television broadcast
and playback system composed of
roughly a million or more pixels, 16:9
aspect-ratio screens, and AC3 digital
audio. A subset of digital television,
HDTV formats include 1080i and 720p
resolutions.
AV Mode is three preset picture and
audio settings. It allows the viewer to
quickly switch between common settings. It includes Cinema, Sports, and
Game Modes.
A unique invisible speaker system
tuned by renowned audio expert, Mr.
Mark Levinson. Speakers are embedded in strategic spots behind the front
cabinet and use minute vibrations to
turn the entire front bezel into the
speaker system. The result s a clean,
polished look, and enhanced audio by
increasing the “sweet spot”, giving a
wider and richer sound field.
Automatically enhances and amplifies
the sound of human voice frequency
range to help keep dialogue audible
when background noise swells.
Unlike other sensors which can only
sense brightness of ambient light, LG’s
“Intelligent Sensor” uses 4,096 sensing steps to evaluate its surroundings.
Using a sophisticated algorithm, the LG
processes picture quality elements
including brightness, contrast, color,
sharpness and white balance. The result
is a picture optimized for it’s surroundings, more pleasing to watch and which
can also save up to 50% in power consumption.
Manufactured under license from Dolby
Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
Displays HDTV programs in full 1920 x
1080p resolution for a more detailed
picture.
View videos and photos and listen to
music on your TV through USB 2.0
(‘videos’ dependent on model).
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that
plays DivX video. Visit www.divx.com for
more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Videoon-Demand (VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup
menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
“DivX Certified® to play DivX® video up
to HD 1080p, including premium content”
“DivX®, DivX Certified® and associated
logos are registered trademarks of
DivX, Inc. and are used under license.”
Pat. 7,295,673; 7,460,668; 7,515,710;
7,519,274
IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN
ꔛ
ꔛ
ꔛ
8
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
PREPARATION
1.5V 1.5V
Owner’s Manual
Remote Control,
Batteries (AAA)
Option Extras
Not included with all models
* Wipe spots on the exterior only with the
polishing cloth.
Polishing Cloth
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
D-sub 15 pin Cable
When using the VGA (D-sub 15
pin cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain standards compliance.
19/22/26LE5300, 22/26LE5500
(For 26LE5300,
26LE5500)
x4
(For 26LE5300,
26LE5500)
x4
(M4 x 14)
(M4 x 20)
Screws for stand assembly
(Refer to P.20, 22)
x4
Cable Holder
(Refer to p.31)
Ring spacers
(Refer to p.29)
AC/DC Adapter
Power Cord
32/37/42/47LD450, 37/42/47LD450C, 42/47/55LD630
(For 32/37/42LD450,
37/42/LD450C, 42LD630)
(For 37/42/47LD450C)
x8
(M4 x 20)
Screws for stand Screws for stand fixing
assembly
(Refer to P.33)
(Refer to P.24)
Protection Cover
(Refer to P.25)
Power Cord
Protective Bracket
and Screw for
Power Cord
(Refer to P.30)
9
PREPARATION
32/42/47LD420, 32/42/47/55LD520, 55LD520C
(For 55LD520C)
PREPARATION
x4
x4
(M4 x 14)
(M4 x 24)
Screws for stand assembly
(Refer to P.26)
(Except 47LD420,
47/55LD520, 55LD520C)
(For 55LD520C)
x2
Torx plus Star head screw
(Refer to P.26)
Screw for stand fixing
(Refer to P.33)
(For 55LD520C)
Protection Cover
(Refer to P.27)
Power Cord
Protective Bracket and Screw
for Power Cord (Refer to P.30)
32/37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C
(32/37/42/47/55LE5300, 42/47/55LE530C)
(32LE5300)
(37/42LE5300,
42LE530C)
x4
x4
(M4 x 22)
(M4 x 24)
(47/55LE5300,
47/55LE530C)
x4
x4
(M4 x 26)
(M4 x 16)
Screws for stand assembly
(Refer to P.22)
(42/47LE7300)
x3
(55LE7300)
x4
(M4 x 20) (M4 x 12)
x3
x4
(M4 x 26) (M4 x 16)
Screws for stand assembly
(Refer to P.21)
(For 42/47/55LE7300)
(For 32LE5300)
x2
Component gender Cable Management
Cable Holder
Clip
(Refer to p.31) cable, AV gender cable
(Refer to p.31)
10
(For 42/47/55LE530C)
x2
Screw for stand
fixing
(Refer to P.33)
Torx plus Star head
screw
(Refer to P.22)
FRONT PANEL INFORMATION
ꔛ
Image shown may differ from your TV.
19/22/26LE5300, 22/26LE5500
Remote Control Sensor
PREPARATION
19/22/26/32/37/42/47/55LE5300,
22/26LE5500, 42/47/55LE530C
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.111)
32/37/42/47/55LE5300, 42/47/55LE530C
SPEAKER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.111)
19/22/26LE5300, 22/26LE5500
CH
VOL
ENTER
CHANNEL VOLUME
(-, +)
(ꕍ,ꕌ)
Buttons
Buttons
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
32/37/42/47/55LE5300, 42/47/55LE530C
CH
VOL
CHANNEL VOLUME
(-, +)
(ꕍ,ꕌ)
Buttons
Buttons
ENTER
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
11
PREPARATION
ꔛ
Image shown may differ from your TV.
PREPARATION
32/37/42/47LD450, 37/42/47LD450C
CH
VOL
CHANNEL
(ꕌ,ꕍ) Buttons
VOLUME (+, -)
Buttons
ENTER
ENTER Button
MENU
INPUT
MENU Button
INPUT Button
SPEAKER
POWER Button
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.111)
12
CH
VOL
CHANNEL
(ꕌ,ꕍ) Buttons
PREPARATION
42/47/55LD630
VOLUME (+, -)
Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
SPEAKER
INPUT Button
POWER Button
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.111)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions.
13
PREPARATION
ꔛ
Image shown may differ from your TV.
PREPARATION
32/42/47LD420
CH
CHANNEL
(▲,▼) Buttons
VOL
VOLUME (+, -)
Buttons
SPEAKER
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.111)
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
POWER Button
32/42/47/55LD520, 55LD520C
CHANNEL
(▲,▼) Buttons
CH
SPEAKER
VOLUME (+, -)
Buttons
VOL
Remote Control Sensor,
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
ENTER Button
ENTER
MENU Button
MENU
INPUT Button
Power/Standby Indicator
(Can be adjusted using the Power Indicator in
the OPTION menu.►p.111)
14
INPUT
POWER Button
PREPARATION
42/47/55LE7300
CH
VOL
CHANNEL
(▲,▼) Buttons
VOLUME (+, -)
Buttons
ENTER Button
Power/Standby Indicator
(Can be adjusted using the
Power Indicator in the OPTION
menu.►p.111)
ENTER
MENU Button
MENU
INPUT Button
INPUT
POWER Button
Remote Control Sensor
! NOTE
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
► Do not step on the glass stand or subject it
to any impact.It may break, causing possible
injury from fragments of glass, or the TV
may fall.
► Do not drag the TV. The floor or the product
may be damaged.
15
PREPARATION
BACK PANEL INFORMATION
ꔛ
Image shown may differ from your TV.
19/22LE5300,
22LE5500
3
4
2
RS-232C IN
(DVI)
8
USB IN
1
2
26LE5300,
26LE5500
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
IN 3
(CONTROL&SERVICE)
AV IN
VIDEO L(MONO) AUDIO R
H/P
5
RGB IN (PC)
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
7
R
9
H/P
DC-IN
1
/DVI IN
11
USB IN
PREPARATION
19/22/26LE5300, 22/26LE5500,
8
1
9
ANTENNA/
CABLE IN
6
Power Connection
1
2
DC IN
Connect the AC/DC adapter plug to the
power input jack on the TV.
Connect the power cord to the AC/DC
adapter first, then plug the power cord into
the wall power outlet.
AC/DC Adaptor
CAUTION
► Please be sure to connect the TV to the AC/DC power adapter before connecting the TV’s
power plug to a wall power outlet.
16
32/37/42/47/55LE5300, 42/47/55LE530C
PREPARATION
USB IN
10
4
OPTICAL
DIGITAL
AUDIO OUT
(CONTROL & SERVICE)
1
RS-232C IN
9
7
3
AV IN 1
RGB IN (PC)
5
VIDEO L/MONO AUDIO R
2
COMPONENT IN 1
ANTENNA/
CABLE IN
AUDIO IN
1
(DVI)
Y
PB
PR
L
AUDIO
VIDEO
(RGB/DVI)
R
7
AV IN2
VIDEO / AUDIO
/DVI IN
3
H/P
2
COMPONENT IN2
Y PB PR / AUDIO
1
IN 4
8
5
6
CAUTION
For HDMI IN 4 and USB IN
► For an optimal connection,
HDMI cables and USB
devices should have bezels
less than 10 mm (0.39
inches) thick.
42/47/55LE7300
1
2
3
4
RS-232C IN
(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
3
AV IN 1
RGB IN (PC)
L/MONO AUDIO R
VIDEO
5
2
*A
10 mm (0.39 inches)
ANTENNA/
CABLE IN
1(DVI)
AUDIO IN
(RGB/DVI)
Y
PB
PR
L
R
AUDIO
VIDEO
COMPONENT IN 1
7
6
17
PREPARATION
32/42/47LD420, 32/37/42/47LD450
PREPARATION
2
3
4
8
IN 2
1
USB IN
10
RS-232C IN
1
H/P
(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
AV IN 1
L/MONO AUDIO R
VIDEO
5
1
Y
AUDIO IN
(RGB/DVI)
/DVI IN
PB
PR
L
R
AUDIO
VIDEO
COMPONENT IN
9
VIDEO L/MONO AUDIO R
RGB IN (PC)
ANTENNA/
CABLE IN
5
AV IN 2
7
6
32/42/47/55LD520, 55LD520C, 42/47/55LD630
10
8
1
1
9
H/P
9
5
VIDEO L/MONO AUDIO R
IN 3
RS-232C IN
(CONTROL & SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
8
IN 3
4
USB IN
3
H/P
2
VIDEO L/MONO AUDIO R
1
USB IN
32/42/47/55LD520,
55LD520C
42/47/55LD630
5
AV IN 1
RGB IN (PC)
L/MONO AUDIO R
VIDEO
5
2
1
/DVI IN
AUDIO IN
(RGB/DVI)
Y
PB
PR
L
COMPONENT IN
7
18
R
AUDIO
VIDEO
ANTENNA/
CABLE IN
6
AV IN 2
AV IN 2
37/42/47LD450C
5
11
USB IN
2
4
8
IN 2
1
PREPARATION
10
1
RS-232C IN
REMOTE
CONTROL IN
(CONTROL & SERVICE)
/DVI IN
EXTERNAL SPEAKER OUT
AV IN 1
VIDEO L/MONO
AUDIO R
L
R
12
RJP
OPTICAL AUDIO IN
DIGITAL (RGB/DVI)
AUDIO OUT
Y
PB
PR
L
COMPONENT IN
R
ANTENNA/
CABLE IN
VIDEO L/MONO AUDIO R
RGB IN (PC)
1
5
AV IN 2
13
1
2
3
4
5
6
3
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesn’t
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
0.32 cm (1/8 inch) headphone jack for analog
PC audio input.
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesn’t work.
RS-232C IN (CONTROL & SERVICE)
Used by third party devices.
This port is used for service or Hotel mode.
AV (Audio/Video) IN
Analog composite connection. Supports standard definition video only (480i).
ANTENNA/CABLE IN
Connect over-the-air or cable signals to this
jack.
7
6
7
8
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
USB INPUT
Used for viewing videos, photos and listening
to MP3s.
9
HEADPHONE
0.32 cm (1/8 inch) headphone jack
Impedance 16 Ω , Maximum audio out 15 mW
10
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC pwer.
11
REMOTE CONTROL IN
For a wired remote control.
EXTERNARL SPEAKER OUT
For use with external speakers.
RJP
Connect this to an LG remote jack pack system.
12
13
19
PREPARATION
STAND INSTRUCTIONS (For 19/22LE5300, 22LE5500)
ꔛ
Image shown may differ from your TV.
DETACHMENT
INSTALLATION
PREPARATION
1
2
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the stand from TV.
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
STAND BASE
3
4
Assemble the TV as shown.
Install the 4 screws into the holes shown.
M4 x 14
! NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
20
STAND INSTRUCTIONS (For 42/47/55LE7300)
ꔛ
Image shown may differ from your TV.
INSTALLATION
DETACHMENT
2
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the stand from TV.
PREPARATION
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 20
42/47LE7300
M4 x 26
55LE7300
3
4
STAND BASE
Assemble the TV as shown.
Install the 4 screws into the holes shown.
M4 x 12
42/47LE7300
M4 x 16
55LE7300
! NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
21
PREPARATION
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C)
ꔛ
Image shown may differ from your TV.
PREPARATION
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
M4 x 20
M4 x 22
M4 x 24
M4 x 26
26LE5300,
26LE5500
32LE5300
37/42LE5300,
42LE530C
47/55LE5300,
47/55LE530C
3
Assemble the TV as shown.
4
Assemble the part of the STAND
REAR COVER with the TV.
5
STAND BODY
STAND BASE
STAND REAR
COVER
Install the 4 screws into the holes shown.
or
(For 42/47/55LE530C)
Tighten the two of these four
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).
x2
x2
! NOTE
22
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
M4 x 14
M4 x 16
26LE5300,
26LE5500
Other models
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the STAND REAR COVER from TV.
4
Detach the stand from TV.
PREPARATION
DETACHMENT
23
PREPARATION
STAND INSTRUCTIONS (For 32/37/42/47LD450, 37/42/47LD450C, 42/47/55LD630)
ꔛ
Image shown may differ from your TV.
PREPARATION
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
AC IN
CABLE MANAGEMENT
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 20
STAND BASE
AC IN
3
Assemble the TV as shown.
4
Install the 4 screws into the holes shown.
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
M4 x 20
! NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
24
1
2
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Remove the screws from the TV.
AC IN
CABLE MANAGEMENT
PREPARATION
DETACHMENT
AC IN
CABLE MANAGEMENT
AC IN
3
Detach the stand from TV.
CABLE MANAGEMENT
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
25
PREPARATION
STAND INSTRUCTIONS
(For 32/42/47LD420, 32/42/47/55LD520, 55LD520C)
ꔛ
Image shown may differ from your TV.
PREPARATION
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
(For 55LD520C)
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 14
STAND BASE
3
Assemble the TV as shown.
4
Install the 4 screws into the holes shown.
M4 x 24
For 55LD520C
x4
! NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
26
Tighten the stand with the four screws
(provided as parts of the TV).
or
Tighten the two of these four
screws and the two Torx plus
star head screws (provided as
parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a
star head driver bit (not provided as parts
of the TV).
x2
x2
ꔛ
Image shown may differ from your TV.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the stand from TV.
PREPARATION
DETACHMENT
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
27
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
Model
19LE5300,
22LE5300,
22LE5500,
26LE5300,
26LE5500
32LE5300,
32LD420,
32LD450,
32LD520
37LE5300,
37LD450,
37LD450C,
42LE5300,
42LE530C,
42LE7300,
42LD450,
42LD450C,
42LD420,
42LD520,
42LD630,
47LE5300,
47LE530C,
47LE7300,
47LD450,
47LD450C,
47LD420,
47LD520,
47LD630
55LE5300,
55LE530C,
55LE7300,
55LD520,
55LD520C,
55LD630
28
A
B
Standard
Screw
Quantity
Wall Mounting Bracket
(sold separately)
LSW100B, LSW100BG
100 * 100
M4
4
LSW100B, LSW100BG
200 * 100
M4
4
LSW200B, LSW200BG
200 * 200
M6
4
LSW400B, LSW400BG,
DSW400BG
400 * 400
M6
4
! NOTE
► Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
► LG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
PREPARATION
► Screw length needed depends on the wall
mount used. For further information, refer to
the instructions included with the mount.
► Standard dimensions for wall mount kits are
shown in the table.
► When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
► Do not use screws longer than the standard
dimension, as they may cause damage to the
inside to the TV.
► For wall mounts that do not comply with the
VESA standard screw specifications, the length
of the screws may differ depending on their
specifications.
CAUTION
► Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
For 26LE5300, 26LE5500
Place the ring spacers on the set before installing the wall
mounting bracket so that the inclination of the backside
of the set can be adjusted perpendicularly.
4-RING SPACERS
29
PREPARATION
CABLE MANAGEMENT
ꔛ
Image shown may differ from your TV.
32/37/42/47LD450, 37/42/47LD450C, 32/42/47LD420, 32/42/47/55LD520, 55LD520C, 42/47/55LD630
PREPARATION
1
Connect the cables as necessary.
To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
For 37/42/47LD450C, 55LD520C: Secure the power cord with the PROTECTIVE BRACKET/
SCREW on the TV back cover. It will help prevent the power cable from being removed by accident.
PROTECTIVE BRACKET/SCREW
2
Open the CABLE MANAGEMENT CLIP as shown.
CABLE MANAGEMENT CLIP
3
30
Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
19/22/26LE5300, 22/26LE5500
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
FOR DESK-TYPE STAND
1
Install the CABLE MANAGEMENT CLIP
as shown.
PREPARATION
1
42/47/55LE7300
CABLE HOLDER
CABLE MANAGEMENT CLIP
32/37/42/47/55LE5300, 42/47/55LE530C
1
Secure the power cord with the CABLE
HOLDER on the TV back cover.
It will help prevent the power cable from
being removed by accident.
2
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
FOR WALL MOUNT
CABLE HOLDER
2
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Install CABLE HOLDER as shown and
bundle the cables.
CABLE HOLDER
CABLE HOLDER
31
PREPARATION
DESKTOP PEDESTAL INSTALLATION
ꔛ
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
PREPARATION
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
CAUTION
► Ensure adequate ventilation by following the clearance recommendations.
► Do not mount near or above any type of heat source.
SWIVEL STAND (Except 19/22LE5300, 22LE5500)
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit
your viewing position.
KENSINGTON SECURITY SYSTEM
ꔛ
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
32
ATTACHING THE TV TO A DESK
(For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300)
ꔛ
Image shown may differ from your TV.
Stand
PREPARATION
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
1-Screw
(provided as parts of the product)
Desk
For 37/42/47LD450C
Stand
4-Screws
(not provided as parts of the product)
For 55LD520C
Desk
4-Screws
(not provided as parts of the product)
► Recommended screw size: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
WARNING
► To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
33
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
ꔛ
PREPARATION
ꔛ
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
ꔛ
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
ꔛ
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
! NOTE
► Use a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
► To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
34
ꔛ
ꔛ
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
Image shown may differ from your TV.
ANTENNA OR CABLE CONNECTION
PREPARATION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA/
CABLE IN
RF Coaxial Wire (75 Ω)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the copper wire
when connecting the antenna.
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 Ω)
ꔛ
ꔛ
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.
com. Search for antenna.
35
EXTERNAL
EXTERNALEQUIPMENT
EQUIPMENT
SETUP
SETUP
ꔛ
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
ꔛ
IThis part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 26LE5300/26LE5500.
HD RECEIVER SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
Component Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
1
Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT IN
VIDEO or 1/2* jacks on the TV. Match the jack
colors (Y = green, PB = blue, and PR = red).
2
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO or 1/2*
jacks on the TV.
Y
1
PR
L
1
2
R
2
RS-232C IN
VI)
(CONTROL&SERVICE)
2. How to use
ꔛ
PB
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box operation.)
AV IN
VIDEO L(MONO) AUDIO R
GB IN (PC)
Y
PB
VIDEO
PR
L
AUDIO
R
COMPONENT IN
ANTENNA/
CABLE IN
ꔛ
Select the Component or Component1/2* input
source on the TV using the INPUT button on the
remote control.
* Component2: For 32/37/42/47/55LE5300,
42/47/55LE7300, 42/47/55LE530C
Y, CB/PB, CR/PR
1280x720p
1920x1080i
1920x1080p
36
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
USB IN
IN 4
59.94
60.00
AV IN2
VIDEO / AUDIO
720x480p
15.73
15.73
For 32/37/42/47/55LE5300,
42/47/55LE7300, 42/47/55LE530C
H/P
720x480i
Vertical
Frequency(Hz)
COMPONENT IN2
Y PB PR / AUDIO
Resolution
Horizontal
Frequency(kHz)
2
1
PR
PB
Y
R
L
HDMI Connection
1
No separate audio connection is necessary.
HDMI supports both audio and video.
DC-IN
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
1
RGB IN (PC)
Y
PB
PR
VIDEO
2. How to use
ꔛ
L
AUDIO
COMPONENT IN
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
ꔛ
Select the HDMI1, HDMI2, HDMI3*, or HDMI4**
input source on the TV using the INPUT button
on the remote control.
* HDMI3: For 26LE5300, 26LE5500, 32/42/47/55LD520,
55LD520C, 42/47/55LD630
** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300,
42/47/55LE530C
HDMI OUTPUT
R
EXTERNAL EQUIPMENT SETUP
2
Connect the digital set-top box to HDMI/DVI IN
1, 2, 3*, or 4** jack on the TV.
/DVI IN
1. How to connect
! NOTE
► If an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
► HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1
kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)
HDMI-DTV
Resolution
720x480p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
37
EXTERNAL EQUIPMENT SETUP
1. How to connect
DC-IN
1
EXTERNAL EQUIPMENT SETUP
2
/DVI IN
DVI to HDMI Connection
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
Connect the DVI output of the digital set-top
box to the HDMI/DVI IN 1 or 2* jack on the TV.
Connect the digital set-top box audio output to
the AUDIO IN (RGB/DVI) jack on the TV.
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO1 L(MONO) AUDIO R
RGB IN (PC)
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
2. How to use
ꔛ
ꔛ
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
2
Select the HDMI1 or HDMI2* input source on the
TV using the INPUT button on the remote control.
* HDMI2: For 32/42/47/55LD520, 55LD520C, 42/47/55LD630
L
R
AUDIO
! NOTE
► A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio
connection is necessary.
38
DVI OUTPUT
R
DVD SETUP
Component Connection
1. How to connect
1
Y
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO or 1/2* jacks on the
TV.
1
PB
PR
1
2
2
(CONTROL&SERVICE)
2. How to use
ꔛ
ꔛ
R
RS-232C IN
(DVI)
ꔛ
L
EXTERNAL EQUIPMENT SETUP
2
Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT IN VIDEO or 1/2*
jacks on the TV. Match the jack colors (Y =
green, PB = blue, and PR = red).
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
Turn on the DVD player, insert a DVD.
Select the Component or Component1/2* input
source on the TV using the INPUT button on the
remote control.
Refer to the DVD player’s manual for operating
instructions.
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
Y
PB
VIDEO
PR
L
AUDIO
R
ANTENNA/
CABLE IN
COMPONENT IN
* Component2: For 32/37/42/47/55LE5300,
42/47/55LE7300, 42/47/55LE530C
Component Input ports
To get better picture quality, connect a DVD
player to the component input ports as shown
below.
USB IN
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
H/P
IN 4
PB
AV IN2
VIDEO / AUDIO
Video output ports
on DVD player
Y
COMPONENT IN2
Y PB PR / AUDIO
Component ports on
the TV
For 32/37/42/47/55LE5300,
42/47/55LE7300, 42/47/55LE530C
2
1
PR
PB
Y
R
L
39
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
1. How to connect
1
2
RS-232C IN
DVI)
1
(CONTROL&SERVICE)
EXTERNAL EQUIPMENT SETUP
Connect the AUDIO/VIDEO jacks between TV
and DVD. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2. How to use
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
GB IN (PC)
Y
ꔛ
ꔛ
ꔛ
AV IN
VIDEO L(MONO) AUDIO R
PB
PR
L
AUDIO
VIDEO
Turn on the DVD player, insert a DVD.
Select the AV or AV1/2* input source on the TV
using the INPUT button on the remote control.
Refer to the DVD player's manual for operating
instructions.
R
ANTENNA/
CABLE IN
COMPONENT IN
1
* AV2: Except 19/22/26LE5300, 22/26LE5500
VIDEO
L
R
AUDIO
HDMI Connection
1
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, 2, 3*, or 4** jack on the TV.
DC-IN
2
/DVI IN
1. How to connect
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
No separate audio connection is necessary.
HDMI supports both audio and video.
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
1
RGB IN (PC)
2. How to use
Y
PB
PR
VIDEO
ꔛ
Select the HDMI1, HDMI2, HDMI3*, or HDMI4** input
source on the TV using the INPUT button on the
remote control.
ꔛ Refer to the DVD player's manual for operating
instructions.
* HDMI3: For 26LE5300, 26LE5500, 32/42/47/55LD520,
55LD520C, 42/47/55LD630
** HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300,
42/47/55LE530C
! NOTE
► If an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
► HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1
kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)
40
L
AUDIO
COMPONENT IN
HDMI OUTPUT
R
VCR SETUP
Antenna Connection
1. How to connect
IN
O) AUDIO R
1
L
AUDIO
R
N
2
ANTENNA/
CABLE IN
ANT OUT
S-VIDEO
VIDEO
L
R
AUDIO
ANT IN
Connect the antenna cable to the RF
antenna in socket of the VCR.
OUTPUT
SWITCH
Wall Jack
2
2. How to use
ꔛ
ꔛ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel number.
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
Antenna
EXTERNAL EQUIPMENT SETUP
1
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
Composite (RCA) Connection
1. How to connect
1
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2
RS-232C IN
VI)
(CONTROL&SERVICE)
2. How to use
ꔛ
ꔛ
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select the AV or AV1/2* input source on the TV
using the INPUT button on the remote control.
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
B IN (PC)
Y
PB
PR
L
AUDIO
VIDEO
COMPONENT IN
R
ANTENNA/
CABLE IN
1
* AV2: Except 19/22/26LE5300, 22/26LE5500
! NOTE
►If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L(MONO) jack of the TV.
ANT IN
S-VIDEO
VIDEO
L
R
AUDIO
ANT OUT
OUTPUT
SWITCH
41
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
1
EXTERNAL EQUIPMENT SETUP
Connect the AUDIO/VIDEO jacks
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
DC-IN
/DVI IN
1. How to connect
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
2. How to use
Y
PB
PR
L
AUDIO
VIDEO
R
COMPONENT IN
ꔛ
ꔛ
Select the AV or AV1/2* input source on
the TV using the INPUT button on the
remote control.
Operate the corresponding external
equipment.
ANTENNA/
CABLE IN
1
* AV2: Except 19/22/26LE5300, 22/26LE5500
VIDEO
L
R
Video Game Set
Camcorder
42
USB CONNECTION
1. How to connect
2. How to use
After connecting the USB IN jack, you
Memory Key
IN 3
ꔛ
or
H/P
use the USB function. (►p.78)
EXTERNAL EQUIPMENT SETUP
Connect the USB device to the USB
IN jack on the side of TV.
USB IN
1
HEADPHONE SETUP (Except 37/42/47LD450C)
You can listen to the sound through the headphone.
1
Plug the headphone into the headphone socket.
2
To adjust the headphone volume,
press the VOL +/- button. If you
press the MUTE button, the sound
from the headphone is switched off.
H/P
1. How to connect
! NOTE
► AUDIO menu options are disabled when connecting a
headphone.
► When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
► Optical Digital Audio Out is not available when connecting a headphone.
43
EXTERNAL EQUIPMENT SETUP
AUDIO OUT CONNECTION
1. How to connect
EXTERNAL EQUIPMENT SETUP
1
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
1
2
3
Connect the other end of the optical cable to
the digital audio input on the audio equipment.
Set the “TV Speaker option - Off” in the
AUDIO menu. (►p.119). See the external audio
equipment instruction manual for operation.
! NOTE
► When connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
off in the menu. (►p.119)
CAUTION
► Do not look into the optical output port. Looking at
the laser beam may damage your vision.
► Audio with ACP (Audio Copy Protection) function may
block digital audio output.
44
/DVI IN
Send the TV’s audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
RGB IN (PC)
Y
PB
PR
VIDEO
L
AUDIO
COMPONENT IN
2
R
ANTENNA/
CABLE IN
PC SETUP
VGA (D-Sub 15 Pin) Connection
DC-IN
/DV
This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV’s settings.
RS 232C IN
(DVI)
(CONTROL&SERVICE)
1
2
Connect the VGA output of the PC to the
RGB IN (PC) jack on the TV.
RGB IN (PC)
Y
ꔛ
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
Connect PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
ꔛ
AV IN
VIDEO L(MONO) AUDIO R
1
2
RGB OUTPUT
AUDIO
Turn on the PC and the TV.
Select the RGB-PC input source on the TV using
the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
1. How to connect
45
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
EXTERNAL EQUIPMENT SETUP
1
Connect the DVI output of the PC to the
HDMI/DVI IN 1 or 2* jack on the TV.
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
ꔛ
ꔛ
Turn on the PC and the TV.
Select the HDMI1 or HDMI2* input source on the
TV using the INPUT button on the remote control.
DC-IN
/DVI IN
1. How to connect
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
RGB IN (PC)
Y
PB
PR
VIDEO
L
AUDIO
COMPONENT IN
1
2
* HDMI2: For 32/42/47/55LD520, 55LD520C, 42/47/55LD630
AUDIO
46
AV IN
VIDEO L(MONO) AUDIO R
DVI OUTPUT
R
! NOTE
►To get the the best picture quality, adjust the PC graphics card to 1360 x 768 (19/22/26LE5300,
22/26LE5500) or 1920 x 1080 (Other models).
►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
►Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
►The synchronization input form for Horizontal and Vertical frequencies is separate.
►Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
►When selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.
EXTERNAL EQUIPMENT SETUP
►In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
Supported Display Specifications (RGB-PC, HDMI-PC)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.712
60.015
1280x1024
63.981
60.02
1600x1200
75.00
60.00
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.50
60.00
Except 19/22/26LE5300,
22/26LE5500
Except 32/37/42/47/55LE5300,
42/47/55LE7300, 42/47/55LE530C
47
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Selecting Resolution
EXTERNAL EQUIPMENT SETUP
You can choose the resolution in RGB-PC mode.
The Position, Phase, and Size can also be adjusted.
You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
PICTURE
ꔂ Move
ꔉ Enter
SCREEN
Resolution
• Brig
B ight
ht ess
htne
5500
• Sharpness
70
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
Auto Config.
• Advanced Control
Size
• Picture Reset
• Screen (RGB-PC)
Position
ꔠ
ꔉ
Phase
Reset
1
2
3
4
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Resolution.
ENTER
Select the desired resolution.
5
ENTER
48
ꔂ Move
ꔑ 1024 x 768
□ 1280 x 768
□ 1360 x 768
ꕉ Prev.
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
ꔂ Move
SCREEN
ꔉ Enter
ꔂ Move
ꕉ Prev.
Resolution
• Brig
B ightne
ht ss
5500
• Sharpness
70
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
Auto Config.
Position
Size
• Advanced Control
• Picture Reset
• Screen (RGB-PC)
Auto Config.
Yes
No
Phase
ꔠ
ꔉ
Reset
1
MENU
2
3
4
Select PICTURE.
ꔛ
ꔛ
ENTER
Select Screen (RGB-PC).
ENTER
Select Auto Config..
ENTER
Select Yes.
5
ENTER
EXTERNAL EQUIPMENT SETUP
PICTURE
If the position of the image is still not
correct, try Auto adjustment again.
If picture needs to be adjusted again
after Auto adjustment in RGB-PC,
you can adjust the Position, Size or
Phase.
Start Auto Configuration.
49
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, and Phase
If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.
This feature operates only in RGB-PC mode.
EXTERNAL EQUIPMENT SETUP
PICTURE
ꔂ Move
• Brig
B ightne
ht ss
ꔉ Enter
SCREEN
ꔂ Move
ꕉ Prev.
Resolution
5500
• Sharpness
70
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
Auto Config.
◀
▲
▼
▶
Size
• Advanced Control
• Picture Reset
• Screen (RGB-PC)
Position
ꔠ
ꔉ
Phase
Reset
1
2
3
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Position, Size, or Phase.
ꔛ
ꔛ
ꔛ
4
ENTER
5
ENTER
50
Make appropriate adjustments.
Position: This function is to adjust
picture to left/right and up/down as
you prefer.
Size: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase: This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
Screen Reset (Reset to original initial values)
Returns Position, Size, and Phase to the default initial settings.
This feature operates only in RGB-PC mode.
ꔂ Move
• Brig
B ightne
ht ss
5500
• Sharpness
70
• Color
60
ꔉ Enter
SCREEN
ꔂ Move
ꕉ Prev.
Resolution
Auto Config.
• Tint
0
R
G
• Color Temp.
0
W
C
Size
• Advanced Control
• Picture Reset
• Screen (RGB-PC)
Position
ꔠ
ꔉ
Phase
To Set
Yes
No
EXTERNAL EQUIPMENT SETUP
PICTURE
Reset
1
2
3
4
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Reset.
ENTER
Select Yes.
5
ENTER
Start Reset.
51
WATCHING
WATCHING TVTV
/ CHANNEL
/ CHANNEL
CONTROL
CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
The remote control may differ from the images below.
POWER
ENERGY SAVING
Turns the TV on from standby or off to standby.
Adjusts the Energy Saving setting.
►p.104
ENERGY AV MODE INPUT
AV MODE
WATCHING TV / CHANNEL CONTROL
INPUT
TV
SAVING
Rotates through inputs.
Also switches the TV on from standby.
►p.70
1
2
3
4
5
6
7
8
9
0
FLASHBK
Returns to the last TV channel.
NUMBER button
— (DASH)
Used to enter a program number for multiple
program channels such as 2-1, 2-2, etc.
LIST
MARK
FAV
LIST
FLASHBK
Displays the channel table.
►p.67
VOL
Tunes to the last channel viewed.
Displays the main menu or clears all on-screen
displays and return to TV viewing.
INFO
Displays channel information at the bottom of the
screen.
Opens the list of Quick Menu options.
RATIO
CH
MUTE
MENU
Q.MENU
52
TV
Toggles through preset Video and Audio modes.
►p.75
MENU
INFO
Q.MENU
ENTER
►p.59
THUMBSTICK
(Up/Down/Left
Right/ENTER)
Navigates the on-screen menus and adjusts the
system settings to your preference.
BACK
Allows the user to move return one step in an
interactive application or other user interaction
function.
SIMPLINK
See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK
menu appears at the screen. ►p.76
EXIT
Clears all on-screen displays and return to TV
viewing.
BACK
EXIT
P
A
G
E
VOLUME
UP/DOWN
Scroll through the programmed Favorite channels.
►p.66
MARK
Select the input to apply the Picture Wizard settings. ►p.103
Use to mark or unmark a photo/music/movie. ►p.83, 88, 94
RATIO
Changes the aspect ratio.
MUTE
Switches the sound on or off.
►p.100
►p.54
CHANNEL
UP/DOWN
Changes the channel.
PAGE
UP/DOWN
Moves from one full set of screen information to the next one.
COLOR
BUTTON
USB,
SIMPLINK
Control
buttons
Access special functions in some menus.
WATCHING TV / CHANNEL CONTROL
FAV
Adjusts the volume.
• Controls MY MEDIA menu (Movie List, Photo List, Music List)
• Controls the SIMPLINK compatible devices.
Installing Batteries
ꔛ
Open the battery compartment cover on the back
side and install the batteries matching correct polarity.
ꔛ
Install two 1.5V AAA batteries. Don’t mix old or used
batteries with new ones.
ꔛ
Close cover.
53
WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV
1
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
ꔛ
In standby mode to turn TV on, press the / I, INPUT, CH (ꕌ or ꕍ) button on the TV or press
the , INPUT, CH (ꕌ or ꕍ), Number (0-9) button on the remote control.
WATCHING TV / CHANNEL CONTROL
2
Select the viewing source by using the INPUT button on the remote control.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts
to standby mode.
! NOTE
► If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
► If you do not complete the Initial setting, it will appear whenever the TV is switched on until the
Initial setting procedure is completed.
CHANNEL SELECTION
1
Press the CH (ꕌor ꕍ) or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
54
1
Press the VOL (+ or -) button to adjust the volume.
2
If you want to switch the sound off, press the MUTE button.
3
You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
INITIAL SETTING
This Function guides the user to easily set the essential items for viewing the TV for the first time
when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It
can also be activated from the user menus.
ꔛ
ꔛ
Step 1. Selecting Language
1
WELCOME!
Select Menu Language.
Thank you for choosing LG
Step 1. Language
2
ENTER
English
Español
Français
한국어
WATCHING TV / CHANNEL CONTROL
ꔛ
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
“Store Demo” Mode is only intended for use in retail environments. Customers can adjust the
“Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically
return to preset in-store mode after 5 minutes.
“Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes
the TV to set the image quality.
ꔉ Next
Step 2. Mode setting
Step 2. Mode Setting
i Selecting the environment.
Choose the setting mode you want.
Select [Home Use] when setting TV up
in-home. You can adjust picture quality
accordingly through Picture Mode menu
option.
Home Use
1
Select Home Use.
2
ENTER
Store Demo
• Demo Mode
ꕉ Previous
Off
ꔉ Next
For USA, CANADA
55
WATCHING TV / CHANNEL CONTROL
Step 3. Power Indicator (For LED LCD TV)
1
Step 3. Power Indicator
Standby Light
◀
Off
Select On or Off.
▶
2
ꕉ Previous
ENTER
ꔉ Next
WATCHING TV / CHANNEL CONTROL
ꔛ
This function is disable in “Step2. Mode
Setting - Store Demo”.
Step 4. Time Zone
1
Select Time Zone option.
Step 4. Time Zone
Time Zone
◀
Daylight Saving
Eastern
▶
Auto
ꕉ Previous
2
Select Daylight Saving
option.
ꔉ Next
3
ENTER
Step 5. Auto Tuning
Step 5. Auto Tuning
1
ENTER
Before starting,
be sure that the
TV antenna is connected.
ꕉ Previous
56
ꔉ Next
Check your antenna connection and
start Auto Tuning.
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
2
3
MENU
Display each menu.
ENTER
Select a menu item.
4
EXIT
ꔂ Move
• Aspect Ratio
• Manual Tuning
PICTURE
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ3
ꔉ Enter
ꔉ Enter
• ꕊ Energy Saving : Off
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
TIME
ꔂ Move
ꔉ Enter
ꔂ Move
ꔉ Enter
• Clock
• Balance
• Sound Mode
ꔂ Move
: 16:9
• Picture Wizard
• Channel Edit
AUDIO
AUDIO
Return to TV viewing.
PICTURE
ꔉ Enter
• Auto Tuning
CHANNEL
Accept the current selection.
0
L
R
TIME
: Standard
• Infinite Sound: Off
• Treble
50
• Bass
50
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
WATCHING TV / CHANNEL CONTROL
CHANNEL
ENTER
• Rese
Reset
Reset
For USA
LOCK
ꔂ Move
OPTION
ꔉ Enter
• Language
• Set Password
• Lock System
• Caption
: On
LOCK
• Movie Rating
• TV Rating-Children
• TV Rating-General
: Off
• Power Indicator
• Block Channel
OPTION
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
• Downloadable Rating
• Inpu
Inpu
p t Block
pu
ock
For Canada, Philippines
• Set Password
• Lock System
: On
• Block Channel
• TV Rating-English
• TV Rating-French
• Downloadable Rating
• Input Block
• Key Lock
: Off
57
WATCHING TV / CHANNEL CONTROL
i.e)
Input List
ꔂ Move
WATCHING TV / CHANNEL CONTROL
TV
USB
HDMI2
HDMI3
AV
MY MEDIA
MY MEDIA
Movie List
Photo List
Music List
Except 32/42/47LD420,
32/37/42/47LD450,
37/42/47LD450C,
32/42/47/55LD520,
55LD520C
58
Component
RGB-PC
HDMI1
ꔅ Input Label
ꕉ Exit
INPUT
ꔉ Enter
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
◀
Aspect Ratio
16:9 ꔉ
ꔣ Aspect Ratio: Selects your desired picture format.
ꕇ Picture Mode: Selects the desired preset picture setting.
ꕈ Sound Mode: Selects the desired preset sound setting.
ꔴ Multi Audio: Changes the audio language (Digital signal).
ꔴ SAP: Selects MTS sound (Analog signal).
ꔤSleep Timer: Select the amount of time before your TV
turns off automatically.
ꔳ Del/Add: Select channel you want to add or delete.
ꕄ Caption: Select on or off.
ꔢ USB Device: Select “Eject” in order to eject a USB device.
ꕉ Exit
1
2
Q.MENU
Display each menu.
ENTER
Make appropriate adjustments.
3
EXIT
WATCHING TV / CHANNEL CONTROL
A
▶
Return to TV viewing.
59
WATCHING TV / CHANNEL CONTROL
CUSTOMER SUPPORT
Picture Test / Sound Test
This function is a customer support function that can execute picture and sound tests.
ꔑ Picture Test
□ Sound Test
WATCHING TV / CHANNEL CONTROL
□ Product/Service Info.
Yes
No
Close
□ Picture Test
ꔑ Sound Test
? Do you have a sound problem in this
screen?
□ Product/Service Info.
Yes
Close
1
MENU
2
RED
Select Customer Support.
ENTER
Select Picture Test or Sound Test.
ENTER
Select Yes.
3
4
60
? Do you have a problem in this test
screen?
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
No
Product/Service Info.
This function shows support and product information.
Customer Service Center can differ by country.
□ Picture Test
□ Sound Test
ꔑ Product/Service Info.
1
MENU
2
3
RED
Select Customer Support.
ENTER
Select Product/Service Info..
You can check the various
product/Service infomation
based on your model.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
WATCHING TV / CHANNEL CONTROL
Close
61
WATCHING TV / CHANNEL CONTROL
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
1
MENU
2
WATCHING TV / CHANNEL CONTROL
62
GREEN
Select Simple Manual.
Select the part of the manual you would like to see.
RED
Go to the Index page.
BLUE
Play the Simple Manual automatically or manually.
EXIT
Return to TV viewing.
3
CHANNEL SETUP
* The Digital broadcasting (DTV, Cable DTV) is not available for Philippines.
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory
on the channel list.
Run this function if you change your residence or move the TV.
Auto Tuning memorizes only the channels available at the time.
ꔂ Move
ꔉ Enter
• Auto Tuning
ꔉ
ꔡ
CHANNEL
ꔂ Move
ꔉ Enter
• Auto Tuning
• Manual Tuning
• Manual Tuning
• Channel Edit
• Channel Edit
Antenna
Cable
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Start
Close
1
2
MENU
Select CHANNEL.
ENTER
Select Auto Tuning.
ENTER
Select Start.
3
ꔛ
ꔛ
ꔛ
4
ENTER
5
Run Auto tuning.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
WATCHING TV / CHANNEL CONTROL
CHANNEL
The TV will ask for a password if
parental control has been activated
(LOCK Menu). Use the password you
set up in the LOCK Menu to allow a
channel search.
The maximum number of channels
the TV can store is 1000.
Found channels are grouped in the
order of DTV, TV, Cable DTV and
Cable TV.
63
WATCHING TV / CHANNEL CONTROL
Add/Delete Channel (Manual Tuning)
When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal
strength monitor to see the quality of the signal being received.
CHANNEL
WATCHING TV / CHANNEL CONTROL
ꔂ Move
ꔉ Enter
• Auto Tuning
• Manual Tuning
ꔂ Move
• Auto Tuning
ꔉ
ꔀ
• Channel Edit
• Manual Tuning
• Channel Edit
ꔉ Enter
◀
▶
DTV
Select channel type and RF-channel
number.
2
Channel
DTV 2-1
• Signal Strength
• Signal Quality
88%
88%
Delete
Close
1
2
MENU
Select CHANNEL.
ENTER
Select Manual Tuning.
ENTER
Select DTV, TV, Cable DTV,
or Cable TV.
ꔛ
ꔛ
3
4
Select channel you want to
add or delete.
5
ENTER
6
64
CHANNEL
Select Add or Delete.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
The TV will ask for a password if
parental control has been activated
(LOCK Menu). Use the password you
set up in the LOCK Menu to allow a
channel search.
The maximum number of channels
the TV can store is 1000.
Channel Editing
The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel
Edit List are displayed in blue.
When a channel number is deleted, it means that you will be unable to select it using CH∧∨button
during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the
NUMBER buttons or select it in the Channel Edit menu.
ꔂ Move
• Auto Tuning
• Manual Tuning
• Channel Edit
1
2
Favorite Group :
DTV
ꔉ Enter
3-1
A
TV
Page 1/1
Cable DTV
Cable TV
5-1
7-1
ꔠ
ꔉ
MENU
Select CHANNEL.
ENTER
Select Channel Edit.
ENTER
Select a channel.
ꔉ CH.Change
ꘂ Favorite Ch.
ꔂ Navigation
ꘃ Page Change
ꔛ
꘩ Favorite Ch. Group
ꕉ Previous
ꔅ Block/Unblock
ꔅ Add/Delete
Keep pressing the ꕌ button and use
the < or > buttons to move between
DTV, TV, Cable DTV and Cable TV.
WATCHING TV / CHANNEL CONTROL
Channel Edit
CHANNEL
3
4
BLUE
YELLOW
ENTER
CH
P
A
G
E
5
Add or delete a channel.
Block or unblock the channel.
You can block/unblock channels even if
you select “Lock system-Off” in the LOCK
menu.
Switch to the chosen channel number.
Move the pages when the channel list is
too long.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
65
WATCHING TV / CHANNEL CONTROL
FAVORITE CHANNEL SETUP
Favorite Channels are a convenient feature that lets you quickly select channels of your choice without
waiting for the TV to select all the in-between channels.
Favorite List
◀
ꕉ Exit
WATCHING TV / CHANNEL CONTROL
3-1
DTV
4-1
1
P
A
G
E
CH
ꔊꔋFavorite Ch. Group
▶
Group A
DTV
1
2
MARK
FAV
ꔡ
3
ꔅ Ch.Edit
2
3
4
5
6
7
8
9
Select your desired channel.
0
ꔉ
ꔅ Ch.Reg.
or
Select your desired favorite
channel group from A to D.
YELLOW
Register or cancel the current channel
in favorite channel list.
BLUE
Go to the “CHANNEL menu - Channel
Edit”.
4
Return to TV viewing.
EXIT
ꔛ
You can also setup Favorite List in the
CHANNEL menu - Channel Edit.
FAVORITE CHANNEL LIST
Favorite List
◀
ꕉ Exit
ꔊꔋFavorite Ch. Group
▶
Group A
DTV
3-1
DTV
4-1
Displaying the favorite channel list
1
MARK
FAV
ꔉ
ꔡ
Selecting a channel in the favorite
channel list
1
Select a channel.
2
ENTER
ꔅ Ch.Reg.
Display the Favorite channel list.
ꔅ Ch.Edit
Switch to the chosen channel number.
Paging through a favorite channel
list
1
CH
2
EXIT
66
P
A
G
E
Turn the pages.
Return to TV viewing.
CHANNEL LIST
You can check which channels are stored in the memory by displaying the channel list.
Channel List
DTV
3-1
DTV
4-1
ꕉ Exit
ꔒ
ꔉ
ꔡ
This padlock is displayed
when the channel is locked
with parental control.
Displaying Channel List
1
Display the Channel List.
LIST
BLUE
Tune to the “CHANNEL menu - Channel
Edit”.
WATCHING TV / CHANNEL CONTROL
ꔅ Ch.Edit
Selecting a channel in the channel list
1
Select a channel.
2
ENTER
Switch to the chosen channel number.
Paging through a channel list
1
CH
2
EXIT
P
A
G
E
Turn the pages.
Return to TV viewing.
67
WATCHING TV / CHANNEL CONTROL
CHANNEL INFORMATION
ꔖ DTV 8-1 CNN
Brief Info Title Test...
WATCHING TV / CHANNEL CONTROL
68
ꔀ Ch. Change
10:10 AM
▶ Next
ꔉ Watch
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V
No information
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
ꔡ
Displaying Channel Information
1
INFO
2
Show the current channel program Information
on the screen.
Show a previous or next channel’s program information
3
EXIT
Return to TV viewing.
ꔅ Up
ꔅ Down
CHANNEL BRIEF INFORMATION
Brief Info shows the present screen information.
1
ENTER
Shows the current channel’s brief info screen.
ENTER
Return to TV viewing.
2
3
8-1
ꔖ DTV
1
4
Brief Info Title Test...
10:10 AM
ꘋꔫ
CNN
5
Sun, Feb 21, 2010 10: 40 AM
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V
Next - 11:40 AM
News
ꔥ
Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio.
ꔯ
Caption : The program contains one or more caption services.
Use the Q.MENU menu to select wanted Closed caption.
ꔨ
Dolby Digital: The program contains a Dolby Digital audio
signal in TV and HDMI input source.
ꔶ
The original aspect ratio of the video is 4:3
ꔷ
The original aspect ratio of the video is 16:9 (wide)
480i
480p
720p
1080i
1080p
ꔒ
2
1
Program title
2
Day, Month, Year,
Present time
3
Program start time
4
Program progress
bar
5
The
The
The
The
The
video
video
video
video
video
resolution
resolution
resolution
resolution
resolution
is
is
is
is
is
WATCHING TV / CHANNEL CONTROL
6
Program finish
time
6
Banner information
720x480i
720x480p
1280x720p
1920x1080i
1920x1080p
V-Chip: The program contains V-Chip information. Refer to
the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex),
V (Violence), FV (Fantasy Violence)
69
WATCHING TV / CHANNEL CONTROL
INPUT LIST
Only these input signals which are connected to a TV can be activated and selected.
i.e)
Input List
WATCHING TV / CHANNEL CONTROL
1
TV
USB
HDMI2
HDMI3
AV
Component
RGB-PC
HDMI1
ꔅ Input Label
ꕉ Exit
ꔉ Enter
Disconnected inputs are inactive
(grayed out)
INPUT
ENTER
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
70
ꔂ Move
Select the desired input source.
When new external device is connected, this popup
menu is displayed automatically.
If selecting Yes, you can select input source that you
want to appreciate.
But, when selecting “SIMPLINK - On”, popup menu for
HDMI input will not be displayed.
AV
TV: Select it to watch over-the-air, cable and digital cable broadcasts.
AV: Select them to watch a VCR or other external equipment.
Component: Select them to watch DVD or a Digital set-top box.
RGB-PC: Select it to view PC input.
HDMI: Select them to watch high definition devices.
New external input is connected.
Do you want to use this?
Yes
No
INPUT LABEL
This indicates which device is connected to which input port.
ie) Change the input label using Blue
button
i.e)
i.e)
Input List
Input Label
◀
Component
◀
▶
RGB-PC
◀
▶
HDMI2
◀
▶
◀
▶
HDMI1
VCR
▶
ꔍ
TV
USB
HDMI2
HDMI3
AV
Component
RGB-PC
HDMI1
ꔅ Input Label
ꕉ Exit
Close
1
2
INPUT
Select the desired input
source.
BLUE
Select the label.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
3
ꔉ Enter
WATCHING TV / CHANNEL CONTROL
AV
ꔂ Move
71
WATCHING TV / CHANNEL CONTROL
RESET TO FACTORY DEFAULT (INITIAL SETTING)
This function resets the TV to factory default and erases all stored channels.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
• Caption
WATCHING TV / CHANNEL CONTROL
ꔉ
ꔀ
• Initial Setting
!
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ꔛ
ENTER
Select Initial Setting.
ꔛ
ENTER
Select Yes.
3
ENTER
ꔉ Enter
: Off
• Power Indicator
MENU
4
72
: Off
• Initial Setting
2
ꔂ Move
• Language
• Power Indicator
1
OPTION
TV turns off automatically and starts
factory reset.
All user settings
and channel settings will
ꔀ
ꔉ
be reset. Still continue?
Yes
No
When selecting “Lock System - On”
in the LOCK menu, the message to
enter the password appears.
If you forget your password, press
“0-3-2-5” on the remote control.
MODE SETTING
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
OPTION
ꔂ Move
ꔉ Enter
OPTION
ꔂ Move
• Language
• Language
: Off
• Caption
• Caption
i Selecting the environment.
Choose the setting mode you want.
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
• Set ID
:1
• Mode Setting
: Home Use
Select [Home Use] when setting TV up
in-home. You can adjust picture quality
accordingly through Picture Mode menu
option.
Home Use
Store Demo
• Demo Mode
Off
Close
For USA, CANADA
1
2
ꔛ
MENU
Select OPTION.
ENTER
Select Mode Setting.
ENTER
Select Home Use.
3
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
“Store Demo” Mode is only intended
for use in retail environments.
Customers can adjust the “Picture
menu - Picture mode” manually while
inspecting the TV, but the TV will
automatically return to preset instore mode after 5 minutes.
“Store Demo” Mode is an optimal
setting for displaying at stores. “Store
Demo” mode initializes the TV to set
the image quality.
WATCHING TV / CHANNEL CONTROL
• Power Indicator
ꔉ Enter
73
WATCHING TV / CHANNEL CONTROL
DEMO MODE
Displays a slide show to explain the various feature of this TV.
OPTION
ꔂ Move
ꔉ Enter
OPTION
: Off
• Caption
• Caption
WATCHING TV / CHANNEL CONTROL
• Power Indicator
: Off
ꔉ Enter
i Selecting the environment.
Choose the setting mode you want.
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
Select [Store Demo] for in-store dsplay. For use
in-home, select [Home Use].
• Set ID
:1
• Mode Setting
: Store Demo
Home Use
Store Demo
• Demo Mode
Off
Close
1
2
3
MENU
Select OPTION.
ENTER
Select Mode Setting.
ENTER
Select Store Demo.
4
ENTER
5
EXIT
74
ꔂ Move
• Language
• Language
Select On.
Return to TV viewing.
After a while, Demo Mode. starts.
If you want to stop the demo, press any
button (Except VOL +, - and MUTE button).
AV MODE
AV Mode toggles through preset Video and Audio settings.
AV MODE
Cinema
Game
Sport
Press the AV MODE button repeatedly to
select the desired source.
ꔛ
2
ENTER
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
If you select “Cinema” in AV mode,
Cinema will be selected both for
“PICTURE menu - Picture Mode”
and “AUDIO menu - Sound Mode”
respectively.
If you select “Off” in AV mode, the
“Picture Mode” and “Sound Mode”
return to previous selected value.
Off: Disables the AV MODE.
Cinema: Optimizes video and audio
for watching movies.
Sport: Optimizes video and audio for
watching sports events.
Game: Optimizes video and audio for
playing games.
When playing a video game using
PlayStation or Xbox, it is recommended to use the Game mode.
When in Game mode, functions
related to picture quality will be optimized for playing games.
WATCHING TV / CHANNEL CONTROL
1
Off
75
WATCHING TV / CHANNEL CONTROL
SIMPLINK
SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices
with the
logo are fully supported.
SIMPLINK can be turned on and off in the user menus.
1
ꔉ Enter ꕉ Exit
WATCHING TV / CHANNEL CONTROL
◀
2
◀ DISC 1
▶
◀ VCR 1
▶
HDD/DVD-R
HD HT
TV Speaker
1
3
4
5
Select On.
3
HDD Recorder
◀ Speaker
Display SIMPLINK menu.
▶
Watch TV
2
76
On
Select the desired device.
ENTER
4
Control connected AV devices.
ENTER
▶
TV viewing: Switch to the previous TV
channel regardless of the current
mode.
DISC playback: Select and play discs.
When multiple discs are available, the
disc devices are conveniently displayed
at the bottom of the screen.
VCR playback: Control the connected
VCR.
HDD Recordings playback: Control
recordings stored in HDD.
Audio Out to Home Theater speaker/
Audio Out to TV: Select Home Theater
speaker or TV speaker for Audio Out.
ꔉ Enter ꕉ Exit
◀
1
On
▶
Watch TV
2
◀ DISC 1
▶
►When no device is connected (displayed in gray)
3
◀ VCR 1
▶
►Selected Device
HDD/DVD-R
HD HT
4
HDD Recorder
5
◀ Speaker
TV Speaker
▶
►When a device is conected (displayed in bright
color)
SIMPLINK Functions
ꔛ
ꔛ
Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media
without additional settings.
Select AV device: Enables you to select one of the AV devices connected to the TV.
Disc playback: Control connected AV devices by pressing the ꕌꕍ< >, ENTER, ꕖ, ꕗ, ꕘ, ꕚ and ꕙ buttons.
ꔛ Power off all devices: When you power off the TV, all connected devices are turned off.
ꔛ Switch audio-out: Offers an easy way to switch audio-out.
ꔛ Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play,
The TV will automatically turn on.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC:
Consumer Electronics Control).
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does
not provide this function)
ꔛ
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of
the SIMPLINK device with the HDMI cable
► When you switch the Input source with the INPUT button on the remote control, the SIMPLINK
device will stop.
► When you select a device with home theater functionality, the sound output automatically switches
to the home theater speakers and the TV speakers are turned off.
► If a connected SIMPLINK home theater system doesn’t play the audio from the TV, connect the
DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the
back of the SIMPLINK device with an OPTICAL cable.
WATCHING TV / CHANNEL CONTROL
! NOTE
77
MY
MY MEDIA
MEDIA
CONNECTION METHOD
USB Connection
USB IN
1 Connect the USB device to the USB IN jack on the side of TV.
MY MEDIA
N3
Memory Key
Precautions when using the USB device
►Only a USB storage device is recognizable.
►Connecting a USB storage device through a USB hub is not supported.
►A USB storage device which uses its own driver may not be recognized.
►The recognition speed of a USB storage device may depend on each device.
► Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
►Only use a USB storage device which has normal music files, image files, or movie files.
►Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system provided with the Windows operating system. Others may not be recognized.
►Some USB storage devices require a power adapter. The power adapter must be connected in
order to be seen by the TV.
►If a device is not recognized by the TV, try a different cable. Excessively long cables are not supported.
►Some USB storage devices may not be supported or operate properly.
►Please backup important files because data on USB device could be damaged. Data management
is consumer's responsibility and as a result, the manufacturer does not cover data damage.
►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can
use up to 4 partitions or USB memory devices.
►In case of USB storage devices formatted as NTFS, deletion is not supported.
►File alignment method of USB storage device is similar to Window XP and file names can be up
to 100 English characters.
►The recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB
memory.
►If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and
on again to make it work properly. Refer to the user manual of the USB external hard disk.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
78
ENTRY MODE
The My Media menu will open automatically when you insert a USB drive. My Media can also be
accessed by choosing My Media in the user menu.
On USB device, you can not add a new folder or delete the existing folder.
MY MEDIA
Movie List
Photo List
Music List
1
2
MENU
Select MY MEDIA.
ENTER
Select Movie List, Photo List
or Music List.
ꔛ
MY MEDIA
Except 32/42/47LD420,
32/37/42/47LD450,
37/42/47LD450C,
32/42/47/55LD520,
55LD520C,
42/47/55LE530C
This TV can view JPG image files, HD DivX
files or play MP3 audio files.
3
ENTER
When removing the USB device
Select the USB Device menu before
removing the USB device.
1
Q.MENU
2
ENTER
Select USB Device.
Select Eject.
79
MY MEDIA
MOVIE LIST
(Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520,
55LD520C, 42/47/55LE530C)
The movie list is activated once a USB drive is detected. It is used when playing movie files on the TV.
It displays all of the video files it recognizes.
The On-Screen Display on your model may be slightly different.
MY MEDIA
Supported movie file
ꔛ Resolution: under 1920 pixel (width) x 1080 pixel (height)
ꔛ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720)
ꔛ Max bitrate of playable video file: 20 Mbps (Mega bit per second)
ꔛ Bit rate : within 32 kbps to 320 kbps (MP3)
ꔛ Supported external subtitle format: *.smi/*.srt/*.sub (MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt
(TMPlayer)/*.psb (PowerDivX)
ꔛ Supported Internal subtitle format: only, XSUB (It is the subtitle format used in DivX6 files)
Precautions when playing the video files
►Some user-created subtitles may not work properly.
►Some special characters are not supported in subtitles.
►HTML tags are not supported in subtitles.
►Time information in an external subtitle file should be arranged in ascending order to be played.
►The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
►A damaged video file may not be played correctly, or some functions may not be usable.
►Video files produced with some encoders may not be played correctly.
►If the video and audio structure of recorded file is not interleaved, the file not playback properly.
►Video with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for smooth playback.
►Video files other than the specified types and formats may not work properly.
►The movie file encoded by the GMC (Global Motion Compensation) is not supported.
►Only 250 Korean characters, 500 letters and 500 numbers are supported for each line of the
subtitle.
►Only 10000 sync blocks are supported within the subtitle file.
►We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
►DTS Audio codec is not supported.
►A video file more than 30GB in file size is not supported for playback.
►Playing a video via a USB connection that doesn’t support high speed may not work properly.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►The video file and its subtitle file must be located in the same folder.
At this time, a video file name and its subtitle file name must be identical for it to be displayed.
►When you are watching a movie via the Movie List function, you can adjust the picture with the
ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode
is not supported.
80
Supported Video Formats
File
Video Decoder
Audio Codec
mpg, mpeg
MPEG1, MPEG2
MP2, MP3, Dolby Digital, LPCM
dat
MPEG1
MP2
ts, trp, tp
MPEG2, H.264, AVS, VC1
MP2, MP3, Dolby Digital
vob
MPEG1, 2
MP2, MP3, Dolby Digital, LPCM
mp4, mov
MPEG4,DivX 3.11, DivX 4.12, DivX 5.x,
DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,
Xvid 1.03, Xvid 1.10-beta1/2H.264
MP3
mkv
H.264, MPEG-1,2,4
MP2, MP3, Dolby Digital, LPCM
divx, avi
MPEG2, MPEG4, DivX 3.11, DivX 4,
DivX 5, DivX 6, Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03, Xvid
1.10-beta1/2H.264
MP2, MP3, Dolby Digital,
LPCM, ADPCM
JPEG
LPCM, ADPCM
asf, wmv
VC1
WMA
flv
Sorenson H.263, H264
MP3
Max Resolution
Extension name
MY MEDIA
Motion JPEG
(avi, mp4, mkv)
1920 x 1080 @ 30p
(Only Motion JPEG
640x480@30p)
81
MY MEDIA
Screen Components
1
MENU
Select MY MEDIA.
2
ENTER
Select Movie List.
ENTER
1
1
2
3
MY MEDIA
4
5
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
2
Page 1/1
Movie List
USB 1 XTICK
Drive1
M1
Page 1/1
M2
M3
M4
Moon Child.DivX.A
01:34:33
4
ꔂ Move
ꔅ To Photo List
ꔅ Change Numbers
ꔉ Play
ꔅ Mark Mode
ꘃ Page Change ꘁ Mark
ꕯ Exit
3
82
GREEN
Move to Photo List or Music List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
5
Movie Selection
Page 1/1
Movie List
USB 1 XTICK
1
M1
Select the target folder or drive.
Page 1/1
Drive1
M2
M3
2
M4
ENTER
Moon Child.DivX.A
01:34:33
3
ꔂ Move
ꔅ Change Numbers
ꔉ Play
Play the movie file.
ꘃ Page Change ꘁ Mark
ꔅ Mark Mode
ꕯ Exit
ꔛ
Use the CH (ꕌꕍ) button to navigate
in the movie page.
Mark Mode
1
Page 1/1
Movie List
Mark Mode
Drive1
USB 1 XTICK
M1
M2
Select the target folder or
drive.
Page 1/1
M3
2
M4
ENTER
Moon Child.DivX.A
01:34:33
3
MARK
FAV
ꔂ Move
ꔅ Play Marked
RED
ꔅ Mark All
ꔅ Unmark All
ꔉ Mark
ꘃ Page Change ꘁ Mark
ꔅ Exit Mark Mode
Play Marked: Play the first selected file. Once
a movie finishes playing, the next selected
one will be played automatically.
GREEN
Mark All: Mark all files in the folder.
YELLOW
Unmark All: Deselect all marked files.
BLUE
4
ꕯ Exit
ꔛ
MY MEDIA
ꔅ To Photo List
ENTER
Select the desired
movie title.
RED
Select the desired
movie title.
Mark your desired movie file.
Play the marked movie file.
It displays the current movie
status progress bar on the bottom of the screen.
When one or more movie files are
marked, the marked movies will be
played in sequence.
Exit the Mark Mode.
83
MY MEDIA
Using the Movie List Function
Choose options.
Set Video Play.
Set Video.
Set Audio.
Close
ꔊꔋ
ꕖ
ꕗ
ꕖ
ꕘ
01:02:30 / 02:30:25
ꕚ
ꕙ
ꕊ
꘩ Option
ꕉ Hide
ꕯ Exit
MY MEDIA
! NOTE
1
Show the Option menu.
Q.MENU
2
ENTER
Select Set Video Play., Set Video., or
Set Audio.
Using the remote control
EXIT
► Option values changed in the Movie List
does not affect Photo List and Music
List.
► Option values changed in Photo List and
Music List are changed likewise in Photo
List and Music List, but not in the Movie
List.
► When replaying a video file after stopping, you can play from where it stopped
automatically.
► If you select “Yes” when playing the
same file after the video file has been
stopped, it will restart where it stopped
previously.
► If continuous series files exist within the
folder, the next file will automatically be
played. But, this excludes cases when
the Repeat function of Movie List Option
is turned “On” (Refer to page 85) or
when set as Marked Play.
Return to TV viewing.
Select the required speed: x2, x4, x8, x16, x32 (backward/forward).
Pauses the media player.
If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
Displays a slow motion.
Move to a specific frame forward or backward while playing a video. A cursor indicating the position can be viewed on the screen. It may not work properly for
some movie files.
Return to normal playback.
BACK
ENERGY
SAVING
Hide the menu on screen. To see the menu again, press ENTER button to display.
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen (Refer to p. 104).
AV MODE
Press the AV MODE button repeatedly to select the desired source (Refer to p. 75).
84
Set Video Play Menu Options
Set Video Play.
◀
Full
▶
Audio Language
◀
1
▶
Subtitle
◀
On
▶
• Language
◀
Unknow
▶
• Code Page
◀
Default
▶
• Sync
◀
0
▶
• Position
◀
0
▶
• Size
◀
Normal
▶
Repeat
◀
Off
▶
MY MEDIA
Picture Size
ꕉ Previous
1
2
Select Picture Size, Audio Language,
Subtitle, or Repeat.
ꔛ
ꔛ
Make appropriate adjustments.
ꔛ
Code Page
Subtitle Language Group
Supported Language
Latin1
English, Spanish, French
Korean
English, Korean
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Picture Size: Selects your desired
picture format for videos.
Audio Language: Changes the
Language Group of the audio for
video files.
Subtitle Language: The subtitles can
be turned on or off. If there are two
or more subtitles, you can select one
of them.
Language: Activated for SMI subtitles
and can select the language within
the subtitle.
Code Page: Subtitle font selection.
When set to default, same font as
general menu will be used.
Sync: When the video is not synchronized with the captions, it can be
adjusted by 0.5 second.
Position: Move the location of the
subtitles.
Size: Changes the subtitle font size.
Repeat: Turn on/off repeat function
of movie playback. When turned on,
the file within the folder will be played
back repeatedly.
85
MY MEDIA
* Image shown may differ from your TV.
Set Video Menu Options
Set Video.
◀
Picture Mode
Standard
▶
• Backlight
70
◀
▶
• Contrast
100
◀
▶
• Brightness
50
◀
▶
• Color
60
◀
▶
MY MEDIA
• Dynamic Contrast
◀
Medium
▶
• Edge Enhancer
◀
High
▶
• Noise Reduction
◀
Medium
▶
◀
Low
▶
TruMotion
('TruMotion' dependent on model)
ꔅ Picture Reset
1
ꕉ Previous
Select Picture Mode or TruMotion.
2
Make appropriate adjustments.
BLUE
Reset picture settings to default.
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
▶
ꕉ Previous
1
2
86
Select Sound Mode, Auto Volume, Clear
Voice II or Balance.
Make appropriate adjustments.
PHOTO LIST
The On-Screen Display on your model may be slightly different.
Supported photo file: *.JPG
ꔛ Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)
ꔛ Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height)
ꔛ You can play JPEG files only.
ꔛ Non-supported files are displayed in the form of predefined icon.
Screen Components
MENU
2
Select MY MEDIA.
ENTER
Select Photo List.
ENTER
1
1
2
3
4
5
Moves to upper level folder
Current page/total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
MY MEDIA
1
2
Page 1/1
Photo List
USB 1 XTICK
Drive1
P1
P2
P3
P4
Page 1/1
P5
P6
P7
P8
5
P9
4
ꔂ Move
ꔅ To Music List
ꔅ Change Numbers
ꔉ View
ꔅ Mark Mode
ꘃ Page Change
ꘁ Mark
ꕯ Exit
3
GREEN
Move to Music List or Movie List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
87
MY MEDIA
Photo Selection
1
Page 1/1
Photo List
USB 1 XTICK
Drive1
2
3
ꔂ Move
MY MEDIA
ꔅ To Music List
ꔅ Change Numbers
Select the target folder or drive.
Page 1/1
ꔉ View
ꘃ Page Change
ꔅ Mark Mode
ꘁ Mark
ꔛ
ꕯ Exit
ENTER
ENTER
Select the desired photos.
Photo file is displayed.
Use the CH (ꕌꕍ) button to navigate
in the photo page.
Mark Mode
1
Page 1/1
Select the target folder or drive.
Photo List
Mark Mode
Drive1
USB 1 XTICK
Page 1/1
2
3
ENTER
MARK
FAV
4
ꔂ Move
ꔅ View Marked
RED
ꔅ Unmark All
ꘃ Page Change
ꔅ Exit Mark Mode
ꘁ Mark
View Marked: Display the selected photo.
Mark All: Mark all photos on the screen.
YELLOW
Unmark All: Deselect all marked photos.
Exit the Mark Mode.
RED
Mark your desired photo files.
View the marked photo files.
ꕯ Exit
GREEN
BLUE
88
ꔅ Mark All
ꔉ Mark
Select the desired
photo files.
ꔛ
When one or more photos are
marked, you can view individual photos or a slide show of the marked
photos. If no photos are marked, you
can view all photos individually or all
photos in the folder in a slide show.
Full Screen Menu
More operations are available in full screen mode.
Page 1/1
Photo List
USB 1 XTICK
Drive1
Page 1/1
ꔂ Move
ꔅ Change Numbers
ꔉ View
ꘃ Page Change ꘁ Mark
ꔅ Mark Mode
MY MEDIA
ꔅ To Music List
ꕯ Exit
01_a.jpg
2008/12/10
1920 x 1080
479 KB
◀
▶
◀
Slideshow ꘡
1
2
3
BGM ꘡
꘤
2/13
ꔦ
ꕊ
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
▶
꘩ Option
ꕉ Hide
Select the target folder or drive.
ENTER
ENTER
ꕯ Exit
ꔛ
Use the CH (ꕌꕍ) button to navigate
in the photo page.
Select the desired photos.
The selected photo is displayed in full
size.
89
MY MEDIA
01_a.jpg
2008/12/10
1920 x 1080
479 KB
4
ENTER
Select the Slideshow,
◀
BGM, ꘤ (Rotate),
▶
ꔦ (Zoom In), ꕊ (Energy Saving),
Option, or Hide.
ꔛ
◀
MY MEDIA
▶
Slideshow ꘡
BGM ꘡
꘤
ꔦ
2/13
ꕊ
▶
꘩ Option
ꕉ Hide
Use < > button to select the previous or next photo.
ꕯ Exit
► Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos
in the current folder are displayed during slide show.
ꔛ Set the time interval of the slide show in Option-Set Photo View. menu (Refer to p. 91).
ꔛ You can adjust Option by using the Q.MENU button on the remote control.
► BGM (Background Music): Listen to music while viewing photos in full size.
ꔛ Set the BGM device and album in Option-Set Photo View. menu (Refer to p. 91).
ꔛ You can adjust Option by using the Q.MENU button on the remote control.
► ꘤ (Rotate): Rotate photos.
ꔛ Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise.
ꔛ Photos cannot be rotated if its width is greater than the available supported resolution height.
► ꔦ (Zoom In): View the photo by zoom in 2, 4 times by using Blue button.
► ꕊ (Energy Saving): Increase the brightness of your screen by using ENERGY SAVING button.
► Option: Set values for Slide Speed and Music Album (Refer to p. 91).
ꔛ You cannot change Music Album while BGM is playing.
ꔛ You can only select the MP3 folder saved on the device that currently displays the photo.
► Hide: Hide the menu on the full-sized screen.
ꔛ To see the menu again on the full-sized screen, press ENTER button to display.
► Exit: Move to the previous menu screen.
90
Using the Photo List Function
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Choose options.
Set Photo View.
◀
▶
Set Video.
Set Audio.
Close
1
Q.MENU
BGM ꘡
꘤
2/13
ꔦ
ꕊ
▶
꘩ Option
ꕉ Hide
Show the Option menu.
2
ENTER
MY MEDIA
◀
Slideshow ꘡
Select Set Photo View., Set Video.,
or Set Audio.
ꕯ Exit
! NOTE
► Option values changed in Photo List do
not affect Movie List and Music List.
► Option values changed in Photo List or
Music List are changed likewise in Photo
List and Music List, but not Movie List.
Set Photo View Menu Options
Set Photo View.
Slide Speed
◀
Music Album
Fast
▶
Drive1
• Repeat
◀
On
▶
• Random
◀
Off
▶
ꕉ Previous
1
2
Select Slide Speed or Music Album.
Make appropriate adjustments.
91
MY MEDIA
* Image shown may differ from your TV.
Set Video Menu Options
Set Video.
◀
Picture Mode
Standard
▶
• Backlight
70
◀
▶
• Contrast
100
◀
▶
• Brightness
50
◀
▶
• Color
60
◀
▶
• Dynamic Contrast
◀
Medium
▶
• Edge Enhancer
◀
High
▶
• Noise Reduction
◀
Medium
▶
◀
Low
▶
MY MEDIA
TruMotion
(depending on models)
ꔅ Picture Reset
1
ꕉ Previous
Select Picture Mode or TruMotion.
2
Make appropriate adjustments.
BLUE
Initialize the adjusted picture value.
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
▶
ꕉ Previous
1
2
92
Select Sound Mode, Auto Volume, Clear
Voice II or Balance.
Make appropriate adjustments.
MUSIC LIST
This TV cannot play back copy-protected files.
The On-Screen Display on your model may be slightly different.
MUSIC (*.MP3) supporting file
Bit rate 32 Kbps - 320 Kbps
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
• Sampling rate MPEG2.5 Layer3: 8 kHz, 11.025 kHz, 12 kHz
1
MENU
Select MY MEDIA.
2
ENTER
Select Music List.
ENTER
1
1
2
3
4
5
6
Preview: If any album jacket for
the file (Album Art Image)
exists, this picture is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
MY MEDIA
Screen Components
2
Page 1/1
Music List
Drive1
USB 1 XTICK
001. - B01.mp3
00:00
Page 1/1
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
4
005. - B05.mp3
00:00
ꔂ Move
ꔅ To Movie List
5
ꔅ Change Numbers
ꔉ Play
ꔅ Mark Mode
ꘃ Page Change
ꘁ Mark
ꕯ Exit
3
GREEN
Move to Movie List or Photo List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen (Refer to p. 104).
(It's available "ENERGY SAVING - Off, Screen Off" only.)
93
MY MEDIA
Music Selection
Page 1/1
Music List
1
Drive1
USB 1 XTICK
001. - B01.mp3
00:00
Select the target folder or drive.
Page 1/1
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
2
ENTER
005. - B05.mp3
00:00
3
ꔂ Move
ꔅ To Movie List
ꔅ Change Numbers
ꔉ Play
ꘃ Page Change
ꔅ Mark Mode
ENTER
Select the desired
music file.
Music files are played.
ꘁ Mark
ꕯ Exit
ꔛ
MY MEDIA
Use the CH (ꕌꕍ) button to navigate
in the music page.
Mark Mode
Page 1/1
1
Music List
Mark Mode
Drive1
USB 1 XTICK
001. - B01.mp3
00:00
002. - B02.mp3
00:00
Select the target folder or
drive.
Page 1/1
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
2
3
ENTER
MARK
FAV
ꔂ Move
ꔅ Play Marked
RED
ꔅ Unmark All
ꔉ Mark
ꘃ Page Change
ꔅ Exit Mark Mode
ꘁ Mark
Play Marked: Play the selected songs. Once a
song finishes playing, the next selected one
will be played automatically.
Mark All: Mark all songs in the folder.
YELLOW
Unmark All: Deselect all marked song.
Exit the Mark Mode.
4
ꕯ Exit
GREEN
BLUE
94
ꔅ Mark All
ꔛ
RED
Select the desired
music file.
Mark your desired music file.
Play the marked music file.
When one or more music files are
marked, the marked music files will
be played in sequence.
Using the Music List Function
Page 1/1
Music List
3 file(s) Marked
Drive1
Choose options.
Page 1/1
Set Audio Play.
ꕖ
Set Audio.
ꔑ
001. - B01.mp3
002. - B02.mp3
00:00
00:00
ꕖ
005. - Mad (Feat).mp3
ꕗ
Q.MENU
ꕘ
ꕚ
ꕙ
ꔑ
004. - B04 .mp3
00:00
ꔊꔋ
ꔅ Play with Photo
005. - B05 .mp3
00:00
02:30 / 03:25
ꕊ
꘩ Option
ꕉ Hide
Show the Option menu.
2
ENTER
Close
Select Set Audio Play. or Set Audio..
ꕯ Exit
! NOTE
MY MEDIA
1
ꕖ
003. - B03.mp3
00:00
ꔑ
► Option values changed in Movie List
does not affect Photo List and Music
List.
► Option value changed in Photo List and
Music List are changed likewise in Photo
List and Music List excluding Movie List.
► You can listen to the music only within
the device currently played.
Using the remote control
Stop playback.
Return to normal playback.
Paused playback.
Select the previous or next song.
GREEN
ENERGY
SAVING
Play with Photo: Start playing the selected songs and then move to the Photo List.
Press the ENERGY SAVING button repeatedly to increase the brightness of your screen
(Refer to p. 104). (It's available "ENERGY SAVING - Off, Screen Off" only.)
A cursor indicating the position can be played on the screen.
EXIT
Move to the previous menu screen.
95
MY MEDIA
Set Audio Play Menu Options
Set Audio Play.
Repeat
◀
On
▶
Random
◀
Off
▶
ꕉ Previous
MY MEDIA
1
2
Select Repeat or Random.
Make appropriate adjustments.
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
▶
ꕉ Previous
1
2
96
Select Sound Mode, Auto Volume, Clear
Voice II or Balance.
Make appropriate adjustments.
ꔛ
If you don't press any buttons for a while, the play information box
will float across the screen. This prevents screen pixel damage due
to a fixed image remaining on the screen for a extended period of
time.
002. B02.mp3
ꕖ 00:31 / 04:04
► Music files with copy-protection will not play.
► Press ENTER or ꕗ button to stop the screen saver.
MY MEDIA
! NOTE
97
MY MEDIA
DIVX REGISTRATION CODE
(Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520,
55LD520C, 42/47/55LE530C)
Using the registration number, movies can be rented or purchased at www.divx.com/vod.
Only DivX files matched with the registration code of the purchased TV are playable.
DivX Reg.Code
MY MEDIA
Deactivation
Movie List
MY MEDIA
1
ENTER
3
Music List
ꕉ Previous
You must register your device to
play DivX protected videos.
Registration code : xxxxxxxxxx
Register at http://vod.divx.com
Close
Select MY MEDIA.
MENU
2
Photo List
i
BLUE
Select DivX Option.
Select DivX Reg. Code.
4
ENTER
Display DivX Reg. Code.
! NOTE
► When loading, some buttons may not work.
► If you use the DivX registration code of another device, the rented or purchased DivX file cannot
be played. Therefore always use the DivX registration code assigned to this product.
► The video or audio of a file converted based on a standard other than the DivX codec standard
may be corrupted or unable to be played.
98
DEACTIVATION
(Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520,
55LD520C, 42/47/55LE530C)
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web server and are blocked from activating more devices. DivX VOD
allows the consumer to activate up to 6 devices under one account.
Delete the existing authentication information to receive a new DivX user authentication for TV. Once
this function is executed, a DivX user authentication is required again to see DivX DRM files.
DivX Reg.Code
MY MEDIA
Deactivation
1
ENTER
3
4
Music List
ꕉ Previous
Yes
No
Select MY MEDIA.
MENU
2
Photo List
Deregistration code:
********
Deregister at http://vod.divx.com
Continue with registration?
MY MEDIA
Movie List
i
BLUE
Select DivX Option.
Select Deactivation.
ENTER
5
ENTER
Select Yes.
Display Deactivation.
99
PICTURE
PICTURE CONTROL
CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux).
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
ꔉ
ꔡ
• Picture Wizard
ꔂ Move
• Aspect Ratio
ꔉ Enter
: 16:9
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
PICTURE
• ꕊ Energy Saving : Off
: Standard
• Picture Mode
ꔑ 16:9
: Standard
• Backlight
70
• Backlight
• Contrast
100
• Contrast
70 □ Just Scan
ꔉ
ꔡ
100 □ Set By Program
• Brightness
50
• Brightness
50 □ 4:3
• Sh
S ap
Shar
pnes
ess
700
• Sh
S ap
Shar
pnes
ess
700 □ Zoom
□ Cinema Zoom 1
PICTURE CONTROL
1
MENU
2
Select PICTURE.
ꔛ
ꔛ
ENTER
Select Aspect Ratio.
ENTER
Select the desired picture format.
You can also adjust Aspect Ratio in
the Q.MENU.
Press the RATIO button repeatedly to
select the desired picture format.
3
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
When adjusting Zoom or Cinema Zoom in Q.MENU
1
Q.MENU
2
Select Aspect Ratio.
ENTER
Select Zoom or Cinema
Zoom.
ENTER
Adjust proportion of Zoom or
Cinema Zoom. The Cinema
Zoom adjustment range is
1-16.
3
4
ENTER
100
Move the image on the screen.
Cinema Zoom
Zoom
ꔀ Move ꔁ Zoom
ꔉ Enter
ꔀ Move ꔁ Zoom
ꔉ Enter
4:3
Adjust the picture horizontally, in a linear
proportion to fill the entire screen.
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Just Scan
Zoom
Normally the edges of video signals are
cropped 1-2%. Just Scan turns off this
cropping and shows the complete video.
Notes: If there is noise on the edges of the
original signal, it will be visible when Just Scan
is activated.
Just Scan operates only in DTV/Cable DTV/
C o m p o n e n t / H D M I - DT V/ D V I - DT V
(720p/1080i/1080p) input source.
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will
be cropped.
Just Scan
Set By Program
Selects the proper picture proportion to
match the source’s image.
(4:3
PICTURE CONTROL
16:9
Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
This enlarges an image with cinemascope
aspect ratio (2.35:1) without distortion.
Note: When enlarging or reducing the picture, the image may become distorted.
4:3)
Set By Program
(16:9
16:9)
Set By Program
101
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen
quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to Low, Recommended or High, you can see the example of
the changes you made.
PICTURE
ꔂ Move
• Aspect Ratio
ꔉ Enter
: 16:9
ꔉ
ꔀ
• Picture Wizard
Black Level
Set the screen above identical to the Recommended sample
below.
• ꕊ Energy Saving : Off
• Picture Mode
70
• Contrast
100
• Brightness
50
• Sh
S ap
Shar
pnes
ess
700
Low
Recommended
• Brightness
High
50 ◀
▶
ꕉ Previous
1
Select PICTURE.
MENU
PICTURE CONTROL
2
: Standard
• Backlight
ENTER
ENTER
5
ENTER
White Level
With Picture Wizard, you can adjust the picture quality of the
original image.
Set the screen above identical to the Recommended sample
below.
ꕖ
ꕉ Previous
ENTER
Adjust Black Level.
Select Picture
Wizard.
Picture Wizard
3
ꔉ Next
ꔉ Next
Adjust Picture Wizard.
Low
Recommended
• Contrast
90 ◀
High
▶
ꕉ Previous
6
ꔉ Next
ENTER
Adjust White Level.
Picture Wizard
Tint
Set the screen above identical to the Recommended sample
below.
Standard
• Standard/Preferred
Preferred
Low
◀ Standard ▶
Recommended
• Tint
ꕉ Previous
4
ꔛ
102
0
◀
High
R
G
▶
ꔉ Next
ꕉ Previous
ENTER
Adjust Standard/
Preferred.
If you select Preferred, OSD (On Screen
Display) differ from that shown in this manual.
7
ꔉ Next
ENTER
Adjust Tint.
Backlight
Color
Set the screen above identical to the Recommended sample
below.
Low
Recommended
• Color
50 ◀
ꕉ Previous
Set the Backlight to your Brightness preference.
Dark
High
• Backlight
▶
ꔉ Next
Recommended
30 ◀
ENTER
▶
ꕉ Previous
ꔉ Next
11
8
Bright
Adjust Color.
ENTER
Adjust Backlight.
i.e)
Complete
Horizontal Sharpness
Set the screen above identical to the Recommended sample
below.
ꔀ Move
ꘁ Mark
Select (an) input(s) to apply the settings.
ꔑ DTV
PICTURE CONTROL
□ TV
□ AV1
□ AV2
Low
Recommended
• H Sharpness
50 ◀
ꕉ Previous
High
□ Component1
□ Component2
▶
□ RGB-PC
ꔑ HDMI1
ꔉ Next
ꔑ HDMI2
ꔑ HDMI3
9
ENTER
Adjust Horizontal
Sharpness.
ꔑ HDMI4
Warning: The picture quality may vary according to the different types of
signal and inputs.
ꕉ Previous
Vertical Sharpness
Set the screen above identical to the Recommended sample
below.
Low
Recommended
• V Sharpness
50 ◀
High
12
ꔉ Confirm
MARK
FAV
13
Select input source to
apply the settings.
i
ENTER
Save.
The current adjustment value is
saved to Expert1.
▶
Close
ꕉ Previous
ꔉ Next
14
10
ENTER
Adjust Vertical
Sharpness.
ꔛ
ꔛ
ꔛ
ENTER
Finish the Picture Wizard.
If you stop the Picture Wizard before the
final step, the changes will not be saved to
the TV.
Once the Picture Wizard sets the picture
quality, Energy Saving is changed to Off
automatically.
To reset changes made by Picture Wizard,
operate Picture Reset when Picture Mode
is on Expert1.
103
PICTURE CONTROL
ꕊ ENERGY SAVING
It reduces the TV’s power consumption by lowering the backlight level.
You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the
Picture Mode.
i.e)
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
PICTURE CONTROL
2
3
ꔉ
ꔀ
104
: Standard
: 16:9
• ꕊ Energy Saving : Off
• Picture Mode
: Standard
• Backlight
70
• Backlight
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sh
Sharpnes
Shar
p s
pnes
70
• Sh
Sharpnes
Shar
p s
pnes
MENU
Select PICTURE.
ENTER
Select ꕊ Energy Saving.
ENTER
Select Off, Minimum, Medium,
Maximum, or Screen Off.
ꔛ
ꔛ
4
ꔉ Enter
• Picture Wizard
• ꕊ Energy Saving : Off
1
ꔂ Move
• Aspect Ratio
• Picture Wizard
• Picture Mode
PICTURE
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
□ Auto
ꔑ Off
70
□ Minimum
90
□ Medium
50
□ Maximum
70
□ Screen Off
ꔉ
ꔀ
When selecting Screen off, the
screen will turn off after 3 seconds.
If you adjust “Energy SavingMaximum”, Backlight feature will not
work.
Press the ENERGY SAVING button
repeatedly to select the appropriate
Energy Saving setup.
PRESET PICTURE SETTINGS (PICTURE MODE)
There are factory presets for picture settings available in the user menus. You can use a preset, change
each setting manually.
PICTURE
ꔂ Move
• Aspect Ratio
ꔉ Enter
: 16:9
• Aspect Ratio
• Picture Wizard
ꔂ Move
ꔉ Enter
: 16:9
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
PICTURE
• ꕊ Energy Saving : Off
ꔉ
ꔀ
: Standard
• Picture Mode
□ Intelligent
ꔉ Sensor
: Standard
• Backlight
70
• Backlight
70
• Contrast
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
• Sh
Sharpnes
Shar
p s
pnes
70
□ Vivid
ꔑ Standard
□ Cinema
ꔉ
ꔀ
Depending on
models
□ Sport
□ Game
□ ꕋ Expert1
□ ꕋ Expert2
2
3
MENU
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select Vivid, Standard, Cinema, Sport,
or Game.
ꔛ
ꔛ
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Vivid, Standard, Cinema, Sport, and
Game Settings are preset for the optimum picture quality at the factory.
Vivid: This is the mode to maximize
the effect of the video in the retail
store. Strengthen the contrast, brightness, color and sharpness for vivid
picture.
Standard: This is the mode to realize
optimum viewing condition for the
general user.
Cinema: This mode optimizes video
for watching movies.
Sport: This is the video mode to
emphasize dynamic video and primary color (e.g, white, uniform, grass,
sky blue etc.) by realizing the optimal
screen for sports.
Game: This is the mode to realize fast
response speed in a fast gaming
screen.
Expert: This is the mode to adjust
the video in detail for video quality
expert and general user.
You can also adjust Picture Mode in
the Q.MENU.
When selecting Intelligent Sensor,
Energy Saving is changed to Auto automatically.
When selecting Intelligent Sensor, it
changes Backlight, contrast, brightness, sharpness, color and tint automatically.
Intelligent Sensor: The most suitable
picture is automatically adjusted
according to the surrounding conditions.
PICTURE CONTROL
1
105
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT - USER MODE
Adjust the picture appearance to suit your preference and viewing situations.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
• Picture Wizard
ꔠ
• ꕊ Energy Saving : Off
• Picture Mode
PICTURE CONTROL
1
2
3
4
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
ꔉ Enter
ꔛ
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select Vivid, Standard, Cinema,
Sport, or Game.
ENTER
Select Backlight, Contrast, Brightness,
Sharpness, Color, Tint, Color Temp., or
Advanced Control.
ENTER
Make appropriate adjustments.
ꔛ
5
BACK
ꔛ
Return to the previous menu.
ꔛ
EXIT
Return to TV viewing.
ꔛ
ꔛ
ꔛ
106
▶
ꔡ
ꔉ
ꔀ
MENU
6
70 ◀
• Backlight
: Standard
Backlight: This function adjusts the
brightness of the backlight behind
the LCD screen. Adjusting the backlight is recommended when setting
the brightness of the TV. When
decreasing the backlight, the brightness of the black becomes darker
without any loss in video signal and
the power consumption is reduced.
Contrast: Increase or decrease the
gradient of the video signal. You may
use Contrast when the bright part of
the picture is saturated.
Brightness: Adjusts the base level of
the signal in the picture. You may use
Brightness when the dark part of the
picture is saturated.
Sharpness: Adjusts the level of crispness in the edges between the light
and dark areas of the picture. The
lower the level, the softer the image.
Color: Adjusts intensity of all colors.
Tint: Adjusts the balance between
red and green levels.
Color Temp.: Set to warm to enhance
hotter colors such as red, or set to
cool to enhance cooler colors such
as blue.
PICTURE IMPROVEMENT TECHNOLOGY
(ADVANCED CONTROL)
Advanced Control allows you to adjust some of the advanced features of your LG display.
To reset to the factory default after making adjustments to each input source, execute the Picture
Reset function for each Picture Mode.
PICTURE
ꔂ Move
• Sh
Sharpnes
Shar
p s
pnes
70
• Color
60
• Tint
0
R
• Color Temp.
0
W
ꔉ Enter
PICTURE
• Advanced Control
ꔉ Enter
C
70
Dynamic Contrast
• Color
60
Dynamic Color
G
• Tint
0 R
0 W White C
• Color Temp. Clear
ꔉ
ꔀ
• Advanced Control
Skin Color
G
• Picture Reset
• TruMotion
ꔂ Move
• Sh
Sharpnes
Shar
p s
pnes
: Low
• Screen (RGB-PC)
• Picture Reset
• TruMotion
• Screen (RGB-PC)
: Low
◀
Off
0
Noise Reduction
Off
Digital Noise Reduction
Low
ꔍ
Close
2
3
ENTER
Select Advanced Control.
ENTER
Select your desired menu option.
4
PICTURE CONTROL
Low
Eye Care
Select PICTURE.
Off
Medium
Black Level
MENU
▶
Off
Gamma
1
Low
Make appropriate adjustments.
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
107
PICTURE CONTROL
EXPERT PICTURE CONTROL
ꕋ Expert1 and ꕋ Expert2 provide even more advanced picture settings for users. Typical used by
professionals for calibrating the TV.
PICTURE
• Aspect Ratio
ꔂ Move
PICTURE
ꔉ Enter
: 16:9
• V Sharpness 50
Dynamic Contrast
• Color
50
Noise Reduction
• Tint
0 R
• ꕊ Energy Saving : Off
: Expert1
• Backlight
• Contrast
□ Vivid ꔉ
70 □ Standard
90 □ Cinema
• Brightness 50 □ Sport
•HS
Sharpn
a p ess 700 □ Game
ꔑ ꕋ Expert1
• TruMotion
ꔉ
ꔀ
□ ꕋ Expert2
• Screen (RGB-PC)
◀
G
Off
Low
: Low
Real Cinema
On
Color Gamut
Wide
PICTURE CONTROL
Edge Enhancer
High
xvYcc
Auto
Off
Close
3
4
5
MENU
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select ꕋ Expert1 or ꕋ Expert2.
ENTER
Select Expert Control.
ENTER
Select your desired menu option.
6
Make appropriate adjustments.
7
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Off
• Picture Reset
Black Level
ꔍ
1
Off
Digital Noise Reduction
• Expert Control
Expert Pattern
2
108
ꔉ Enter
• H Sharpness 50
• Picture Wizard
• Picture Mode
ꔂ Move
▶
*This feature is not available for all models.
ꔛ
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The picture is improved by making bright parts brighter and
dark parts darker.
ꔛ
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue and green
white look more vivid.
Skin Color
ꔛ
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
ꔛ
Reduces screen noise without compromising video quality.
Digital Noise
Reduction
ꔛ
Removes noise caused by compressing video.
Dynamic Contrast
Dynamic Color
ꔛ
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
ꔛ Set black level of the screen to proper level.
ꔛ This function is available in the following modes: AV (NTSC-M), HDMI or
Component.
Clear White
ꔛ
Make the white area of screen brighter and more white.
ꔛ
Adjust the brightness of the screen to prevent the screen from being too
bright. Dims extremely bright pictures.
This feature is enabled in “Picture Mode-Standard, Sports, Game”.
Eye Care
ꔛ
ꔛ
ꔛ
Real Cinema
ꔛ
PICTURE CONTROL
Gamma
You can adjust brightness of dark areas and middle gray level areas of the
picture.
Low : Make brighter and middle gray level areas of the picture brighter.
Medium : Express original picture levels.
High: Make dark and middle gray level areas of the picture darker.
Makes video clips recorded in film look more natural by eliminating judder
effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps). With
LG Real Cinema, every frame is consistently processed 5 times in 1/24 of
a second producing 120 fps with TruMotion or 2 times in 1/24 of a second
producing 48 fps without TruMotion, thus totally eliminating the judder
effect.
This function can also work when TruMotion is off.
Advanced Control
ꔛ Maximize the utilization of colors to increase color quality.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
Color Gamut
LED LCD TV/LCD TV: Expert Control
ꔛ Displays color domain of the signal.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
EBU: Mode to display EBU standard color area.
SMPTE: Mode to display SMPTE standard color area.
BT709: Mode to display BT709 standard color area.
109
PICTURE CONTROL
ꔛ
Edge Enhancer
ꔛ
ꔛ
xvYCC
Color Filter
Expert Pattern
PICTURE CONTROL
Color Temperature
ꔛ
ꔛ
110
This is produces richer colors.
This feature represents rich color as much as conventional video signal.
This function is enabled in "Picture Mode - Cinema, Expert" when a xvYCC
signal is inputted through HDMI.
ꔛ
This function filters specific colors in the video.
You can use the RGB filter to set color saturation and hue accurately.
ꔛ
This is a pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
ꔛ
ꔛ Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
c. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
- Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, then the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
ꔛ
Color Management
System
Show clearer and distinctive yet natural edges in of the video.
This function is enabled in "Picture Mode - Expert".
A tool used by the experts to make adjustments by using the test patterns,
this does not affect other colors but can be used to selectively adjust the
6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is
-30 - +30.
- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30
- +30.
- This feature is disabled in RGB-PC and HDMI-PC mode.
PICTURE RESET
Settings of the selected picture modes return
to the default factory settings.
PICTURE
ꔂ Move
• Sh
Sharpnes
Shar
p s
pnes
PICTURE
ꔉ Enter
ꔂ Move
70
• Color
60
? All picture settings will be reset.
G
• Tint
0 R
Continue?
• Color Temp.
0
W
• Advanced Control
Yes
• Picture Reset
• TruMotion
C
No
i
ꔉ
ꔀ
3
• TruMotion
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced
Resetting
videoControl
configuration...
: Low
• Screen (RGB-PC)
4
MENU
Select PICTURE.
ENTER
Select Picture Reset.
ENTER
• Color
ꔉ Enter
ENTER
EXIT
Initialize the adjusted value.
PICTURE CONTROL
2
70
• Picture Reset
: Low
• Screen (RGB-PC)
1
• Sh
Sharpnes
Shar
p s
pnes
Return to TV viewing.
Select Yes.
POWER INDICATOR
Adjust the power/standby indicator light on the front of the TV.
OPTION
ꔂ Move
OPTION
ꔉ Enter
• Language
• Caption
: Off
• Caption
ꔉ
ꔀ
• Power Indicator
2
3
4
ꔉ Enter
: Off
• Power Indicator
• Initial Setting
1
ꔂ Move
• Language
Standby Light
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
MENU
Select OPTION.
ENTER
Select Power Indicator.
ENTER
Select Standby Light or Power
Light.
5
On
Close
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
▶
On
BACK
ꔛ
Select your desired options.
◀
Power Light
Standby Light: Determines whether to set
the indicator light on the front of the TV to
On or Off in standby mode.
Power Light: Determines whether to set the
indicator light on the front of the TV to On
or Off when the power turns on.
111
PICTURE CONTROL
TRUMOTION
- For 32/37/42/47/55LE5300, 42/47/55LE7300, 32/42/47/55LD520, 55LD520C,
42/47/55LD630, 42/47/55LE530C
Advance video technology that provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture.
PICTURE
ꔂ Move
ꔉ Enter
• Sh
Sharpnes
Shar
p s
pnes
70
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
TruMotion
• Advanced Control
5
• Blur
5
: Low
Low
▶
ꔉ Enter
• Picture Reset
• TruMotion
◀
• Judder
ꔉ
ꔀ
• Screen (RGB-PC)
PICTURE CONTROL
1
MENU
2
ENTER
Select PICTURE.
ꔛ
ꔛ
Select TruMotion.
ꔛ
3
ENTER
Select Low, High, User, or Off.
ꔛ
ꔛ
ꔛ
Adjustment for TruMotion (Judder
and Blur) with selecting User
4
ENTER
5
Make appropriate adjustments.
6
112
Select Judder or Blur.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
Off: Turn off TruMotion operation.
Low: Provides smooth picture movement. Use this setting for standard
use.
High: Provides smoother picture
movement.
Judder: Adjusts noise of the screen.
Blur: Adjusts after-image of the screen.
TruMotion works with all inputs except
PC mode.
If you enable "TruMotion", noise may
appear on the screen. If this occurs,
set "TruMotion" to "Off".
If you select "Picture Mode-Game"
set "TruMotion" to "Off".
SOUND & LANGUAGE CONTROL
AUTO VOLUME
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Sound Mode
ꔉ
ꔡ
0
• Balance
L
: Standard
3
• Auto Volume
: On
• Clear Voice II
: Off ꕅ 3
• Infinite Sound:Off
• Treble
50
• Bass
50
• Bass
50
Select Auto Volume.
ENTER
Select On or Off.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
L
R
: Standard
50
ENTER
ꔠ
ꔉ
ꔑ On
• Treble
Select AUDIO.
ꔉ Enter
□ Off
0
• Balance
• Sound Mode
MENU
4
ꔂ Move
• Rese
Reset
Reset
SOUND & LANGUAGE CONTROL
2
R
AUDIO
• Infinite Sound:Off
• Rese
Reset
Reset
1
ꔉ Enter
113
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
ꔉ Enter
ꔉ
ꔀ
0
L
R
SOUND & LANGUAGE CONTROL
2
3
114
: Off ꕅ 3
• Balance
• Treble
50
• Bass
50
• Bass
50
ENTER
Select On or Off.
Adjustment for Clear Voice Level
with selecting On
Select Level.
Make appropriate adjustments.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
R
◀
ꕅ3
: Standard
• Infinite Sound:Off
Select Clear Voice II.
ꔉ Enter
• Clear Voice II
L
0• Level
50
ENTER
6
• Clear Voice II
• Treble
Select AUDIO.
5
: Off
• Infinite Sound:Off
MENU
4
ꔂ Move
• Auto Volume
• Sound Mode
: Standard
• Rese
Reset
Reset
1
AUDIO
• Rese
Reset
Reset
Close
-
Off
▶
+
BALANCE
Adjust the left/right sound of speaker to suit your taste and room situations.
AUDIO
ꔂ Move
ꔉ Enter
: Off
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Clear Voice II
: Off ꕅ 3
• Sound Mode
0
L
ꔀ
R ꔉ
: Standard
• Infinite Sound:Off
• Infinite Sound:Off
50
• Treble
50
• Bass
50
• Bass
50
Select AUDIO.
ENTER
Select Balance.
ENTER
Make appropriate adjustments.
4
• Balance
0 L
: Standard
• Treble
MENU
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ Enter
R
ꔉ
0 ◀
L
R
▶
Close
• Rese
Reset
Reset
SOUND & LANGUAGE CONTROL
3
• Balance
• Sound Mode
• Rese
Reset
Reset
2
ꔂ Move
• Auto Volume
• Balance
1
AUDIO
115
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment using factory presets.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
0
ꔉ Enter
L
R
ꔉ
ꔀ
: Standard
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
: Standard
50
• Bass
50
• Treble
• Bass
• Rese
Reset
Reset
SOUND & LANGUAGE CONTROL
1
2
3
MENU
Select AUDIO.
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ
R
ꔡ
50 Game
□
50
• Rese
Reset
Reset
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
116
ꔑ Standard
L
□0 Music
□ Cinema
• Infinite Sound□
:OffSport
• Infinite Sound:Off
• Treble
ꔉ Enter
Standard, Music, Cinema, Sport, and
Game are preset for optimum sound
quality at the factory.
You can also adjust Sound Mode in
the Q.MENU.
Standard: Offers standard-quality
sound.
Music: Optimizes sound for listening
to music.
Cinema: Optimizes sound for watching movies.
Sport: Optimizes sound for watching
sports events.
Game: Optimizes sound for playing
games.
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
AUDIO
ꔂ Move
ꔉ Enter
AUDIO
ꔂ Move
• Auto Volume
: Off
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
0
L
R
: Standard
• Balance
0
• Sound Mode
50
• Bass
50
L
R
: Standard
• Infinite Sound
• Infinite Sound:Off
• Infinite Sound:Off
• Treble
ꔉ Enter
ꔉ
ꔀ
• Treble
• Bass
• Rese
Reset
Reset
50 • Treble
50 • Bass
Off
50
◀
▶
50
• Rese
Reset
Reset
Close
1
MENU
Select AUDIO.
ꔛ
3
4
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
ENTER
ꔛ
Select Infinite Sound, Treble, or Bass.
ꔛ
5
ENTER
6
Make appropriate adjustments.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
If sound quality or volume is not at
the level you want, it is recommended
to use a separate home theater system or amp to cope with different
user environments.
If you select “Clear Voice II-On”, the
Infinite Sound feature will not operate.
Infinite Sound: Infinite Sound is a
patented LG proprietary sound processing technology that strives
immersive 5.1 surround sound with
just two front speakers.
SOUND & LANGUAGE CONTROL
2
117
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
ꔂ Move
• Clear
Clear Voic
V i e II
: Off ꕅ 3
0
L
R
: Standard
• Bass
• TV Speaker
SOUND & LANGUAGE CONTROL
1
2
3
: On
MENU
Select AUDIO.
ENTER
Select Reset.
ENTER
Select Yes.
4
ENTER
EXIT
118
• Reset
0
i
• Infinite Sound:Off
Resetting audio configuration...
• Treble
50
• Reset
• TV Speaker
L
: Standard
• Bass
ꔉ
ꔀ
ꔉ Enter
: Off ꕅ 3
• Balance
50
No
Initialize the adjusted value.
Return to TV viewing.
ꔂ Move
• Sound Mode
• Infinite Sound:Off
? All audio settings will be resetted.
50
Continue?• Treble
Yes
AUDIO
• Clear
Clear Voic
V i e II
• Balance
• Sound Mode
ꔉ Enter
: On
50
R
TV SPEAKERS ON/OFF SETUP
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
• Clear
Clear Voic
Cl
V i e II
ꔂ Move
: Off ꕅ 3
0
L
R
: Standard
1
2
3
0
• Infinite Sound:Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
ꔠ
ꔉ
: On
Select AUDIO.
ENTER
Select TV Speaker.
ENTER
Select On or Off.
Return to the previous menu.
EXIT
Return to TV viewing.
L
R
: On
□ Off
ꔠ
ꔉ
ꔑ On
EXTERNAL SPEAKERS ON/OFF SETUP (For 32/37/42/47LD450C)
Turn the external speakers on if using external audio equipment.
AUDIO
• Balance
• Sound Mode
ꔂ Move
ꔠ
0
ꔉ Enter
L
R
: Standard
AUDIO
• Balance
• Sound Mode
• Infinite Sound:Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
: On
• External Speaker : Off
1
2
3
MENU
Select AUDIO.
ENTER
Select Exrernal Speaker.
ENTER
Select On or Off.
4
0
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
L
ꔉ Enter
R
: Standard
• Infinite Sound:Off
• Reset
• TV Speaker
ꔂ Move
ꔠ
• Reset
ꔠ
ꔉ
• TV Speaker
: On
• External Speaker : Off
□ Off
ꔑ On
SOUND & LANGUAGE CONTROL
BACK
• Reset
• TV Speaker
ꔉ Enter
: Standard
• Infinite Sound:Off
MENU
4
ꔂ Move
: Off ꕅ 3
• Balance
• Sound Mode
• Reset
• TV Speaker
AUDIO
• Clear
Clear Voic
Cl
V i e II
• Balance
• Sound Mode
ꔉ Enter
ꔠ
ꔉ
ꔠ
ꔉ
119
SOUND & LANGUAGE CONTROL
STEREO/SAP BROADCAST SETUP
On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio
Program) that accompanies the stereo program if the station transmits an additional sound signal.
Mono sound is automatically used if the broadcast is only in Mono.
◀
Multi Audio
▶
English ꔉ
A
SOUND & LANGUAGE CONTROL
ꕉ Exit
Analog TV
1
2
Q.MENU
Select SAP.
ENTER
Select Mono, Stereo, or
SAP.
3
EXIT
120
Digital TV
Return to TV viewing.
1
2
Q.MENU
Select Multi Audio.
ENTER
Select other languages.
3
EXIT
Return to TV viewing.
AUDIO LANGUAGE
This feature operates only in DTV/Cable DTV mode.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
ꔉ
: Off
• Power Indicator
3
• Initial Setting
English
Audio Language
◀ English ▶
Close
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ENTER
Select Language.
ENTER
Select Audio Language.
Select your desired language.
5
: Off
• Set ID
MENU
4
• Caption
ꔉ Enter
Menu Language
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
SOUND & LANGUAGE CONTROL
2
ꔂ Move
• Language
• Power Indicator
• Initial Setting
1
ꔡ
OPTION
121
SOUND & LANGUAGE CONTROL
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language.
OPTION
ꔂ Move
• Language
• Caption
ꔉ Enter
ꔉ
: Off
ꔡ
• Power Indicator
SOUND & LANGUAGE CONTROL
2
3
122
: Off
• Initial Setting
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ENTER
Select Language.
ENTER
Select Menu Language.
Select your desired language.
From this point on, the on-screen menus
will be shown in the selected language.
5
• Caption
• Set ID
MENU
4
ꔂ Move
• Language
• Power Indicator
• Initial Setting
1
OPTION
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ Enter
Menu Language
◀ English ▶
Audio Language
English
Close
CAPTION MODE
Analog Broadcasting System Captions
Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying
captioning information if provided on a program. Analog caption displays information at any position
on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would
be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to
memorize the caption/text mode which was last set when you turned the power off. This function is
only available when Caption Mode is set On.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
ꔉ
ꔀ
: CC1
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ENTER
Select Caption.
ENTER
Select On.
ꔛ
ꔛ
4
Select CC1-4 or Text1-4.
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
On
Mode
▶
CC1
Digital Option
• Initial Setting
• Set ID
MENU
ꔉ Enter
Close
When selecting Off, Sub-menus for
Analog, DTV, and Digital Option
become disabled.
Caption
The term for the words that scroll
across the bottom of the TV screen;
usually the audio portion of the program provided for the hearing
impaired.
Text
The term for the words that appear in
a large black frame and almost cover
the entire screen; usually messages
provided by the broadcaster.
SOUND & LANGUAGE CONTROL
3
◀
• Caption
• Power Indicator
• Initial Setting
2
ꔂ Move
• Language
: Off
• Power Indicator
1
OPTION
123
SOUND & LANGUAGE CONTROL
Digital Broadcasting System Captions
Choose the language you want the DTV/Cable DTV Captions to appear in.
Other Languages can be chosen for digital sources only if they are included on the program.
This function in only available when Caption Mode is set On.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
: Off
ꔉ
ꔀ
SOUND & LANGUAGE CONTROL
3
124
• Caption
: CC1
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ENTER
Select Caption.
ENTER
Select On.
4
Select CC1-4, Text1-4, or Service1 - 6.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ Enter
On
Mode
▶
CC1
Digital Option
• Initial Setting
• Set ID
MENU
5
◀
• Power Indicator
• Initial Setting
2
ꔂ Move
• Language
• Power Indicator
1
OPTION
Close
Caption Option
Customize the DTV/Cable DTV captions that appear on your screen.
This function in only available when Caption Mode is set On.
◀
OPTION
ꔂ Move
ꔉ Enter
: CC1
◀
• Initial Setting
Font 1
Text Color
• Power Indicator
On
Mode
• Set ID
:1
• Mode Setting
: Home Use
■ White
Text Opacity
▶
Solid
Bg Color
CC1
Digital Option
Close
▶
A Standard
Font
• Language
• Caption
Custom
Size
■ Black
Bg Opacity
Solid
Edge Type
None
Edge Color
■ Black
Close
MENU
Select OPTION.
ꔛ
ꔛ
2
ꔛ
ENTER
Select Caption.
ꔛ
3
ENTER
4
5
Select On.
Select Digital Option.
ꔛ
ꔛ
ꔛ
ENTER
Select Custom.
ꔛ
Size: Set the word size.
Font: Select a typeface for the text.
Text Color: Choose a color for the
text.
Text Opacity: Specify the opacity for
the text color.
Bg (Background) Color: Select a
background color.
Bg (Background) Opacity: Select the
opacity for the background color.
Edge Type: Select an edge type.
Edge Color: Select a color for the
edges.
SOUND & LANGUAGE CONTROL
1
Customize the Size, Font, etc., to your
preference. A preview icon is provided
at the bottom of the screen, use it to
see the caption language.
6
7
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
125
TIME
TIME SETTING
SETTING
CLOCK SETTING
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME
ꔂ Move
• Clock
• Off Time
: Off
• On TIme
• Sleep Timer
ꔉ Enter
TIME
ꔉ
• Clock
ꔡ
ꔂ Move
ꔉ Enter
◀
• Off Time
: Off
: Off
• On TIme
: Off
: Off
• Sleep Timer
: Off
Auto
Month
Date
21
Year
2010
Hour
10 AM
Minute
10
Time Zone
Eastern
Daylight Saving
Auto
Close
TIME SETTING
1
2
3
MENU
Select TIME.
ENTER
Select Clock.
ENTER
Select Auto.
4
Select your viewing area time zone.
USA: Eastern, Central, Mountain,
Pacific, Alaska, or Hawaii.
Canada, Philippines: Eastern,
Central, Mountain, Pacific, New
Foundland, or Atlantic.
5
Select Auto, Off, or On (depending
on whether or not your viewing area
observes Daylight Saving time).
6
126
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
▶
02
Manual Clock Setup
If the current time setting is wrong, reset the clock manually.
TIME
ꔂ Move
• Clock
• Off Time
: Off
• On TIme
• Sleep Timer
ꔉ Enter
TIME
ꔉ
• Clock
ꔡ
ꔂ Move
• Off Time
: Off
: Off
• On TIme
: Off
: Off
• Sleep Timer
: Off
ꔉ Enter
◀
Manual
Month
▶
02
Date
21
Year
2010
Hour
10 AM
Minute
10
Time Zone
Eastern
Daylight Saving
Auto
Close
2
3
MENU
Select TIME.
ENTER
Select Clock.
ENTER
Select Manual.
4
TIME SETTING
1
Select the Year, Month, Date, Hour, or Minute
option.
5
Set the Year, Month, Date, Hour, or Minute
option.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
127
TIME SETTING
AUTO ON/OFF TIME SETTING
This function operates only if the current time has been set.
The Off Time function overrides the On Time function if they are both set to the same time.
The TV must be in standby mode for the On Time to work.
If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV
will automatically revert to standby mode.
TIME
ꔂ Move
TIME
ꔉ Enter
• Clock
ꔂ Move
ꔉ Enter
• Clock
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
ꔉ
ꔀ
ꔎ Feb. 21, 2010 10:10 AM
• Off Time
: Off
• On TIme
: 6:30 AM (Once)
Repeat
: Off
Hour
• Sleep Timer
ꔉ
◀ Once ▶
6 AM
Minute
30
Input
TV
Channel
TV 2-0
Volume
30
Close
TIME SETTING
1
ꔛ
MENU
2
3
Select TIME.
ꔛ
ENTER
ENTER
4
Select Off Time or On Time.
1
Select Repeat.
2
Select Off, Once, Daily, Mon.~Fri.,
Mon.~Sat., Sat.~ Sun., or Sun..
5
Select and set Hour or Minute.
6
128
To cancel On/Off Time function, select
Off.
Only for On Time function
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
3
4
Select Input.
Select the desired input source.
When Selecting TV:
set the channel at turn-on.
Adjust to sound level at
turn-on.
SLEEP TIMER SETTING
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME
ꔂ Move
ꔉ Enter
• Clock
TIME
ꔂ Move
ꔉ Enter
• Clock
• Off Time
: Off
• Off Time
: Off
• On TIme
: Off
• On TIme
: Off
• Sleep Timer
: Off
• Sleep Timer
: Off
ꔠ
ꔉ
ꔑ Off
□ 10 min.
ꔉ
ꔡ
□ 20 min.
□ 30 min.
□ 60 min.
□ 90 min.
□ 120 min.
□ 180 min.
□ 240 min.
1
MENU
Select TIME.
ꔛ
ꔛ
2
Select Sleep Timer.
ENTER
Make appropriate adjustments.
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
TIME SETTING
3
ENTER
To cancel the Sleep Timer, select Off.
You can also adjust Sleep Timer in
the Q.MENU.
129
PARENTAL
CONTROL
/ RATINGS
PARENTAL CONTROL
/ RATINGS
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by
the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be
blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the
theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including made-for-TV movies:
TV-G (General audience)
TV-PG (Parental guidance suggested)
ꔛ TV-14 (Parents strongly cautioned)
ꔛ TV-MA (Mature audience only)
ꔛ TV-Y
(All children)
ꔛ TV-Y7 (Children 7 years older)
ꔛ
ꔛ
SET PASSWORD & LOCK SYSTEM
PARENTAL CONTROL / RATING
Setting up Your Password
Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.
For USA
For Canada, Philippines
LOCK
ꔂ Move
• Set Password
• Lock System
ꔉ Enter
ꔉ
ꔡ
: On
LOCK
• Lock System
MENU
ꔉ
• Movie Rating
• TV Rating-English
• TV Rating-Children
• TV Rating-French
• TV Rating-General
• Downloadable Rating
ENTER
1
2
ꔛ
5
6
8
9
0
130
3
4
7
Input the password.
*
*
Close
: Off
ꔛ
2
*
• Input Block
• Key Lock
Select LOCK.
Enter Password
*
• Block Channel
• Inpu
Inpu
p t Blockk
ꔉ Enter
ꔡ
: On
• Block Channel
• Downloadable Rating
1
ꔂ Move
• Set Password
ꔛ
Enter the password as requested.
The TV is set up with the initial
password “0-0-0-0”.
If you forget your password, press
“0-3-2-5” on the remote control.
Set Password
Change the password by inputting a new password twice.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
1
2
ENTER
MENU
1
2
ꔉ
: On
ꔡ
LOCK
ꔂ Move
• Set Password
• Lock System
: On
New
• Block Channel
• Block Channel Confirm
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Inpu
Inpu
p t Block
pu
ock
• Inpu
Inpu
p t Block
pu
ock
ꔉ Enter
*
*
*
*
*
*
*
*
Close
Select LOCK.
3
4
5
6
7
8
9
Input the password.
0
3
1
ENTER
2
5
6
8
9
0
5
3
4
7
Choose any 4 digits for your new
password.
As soon as the 4 digits are entered,
re-enter the same 4 digits on the
Confirm.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PARENTAL CONTROL / RATING
4
Select Set Password.
131
PARENTAL CONTROL / RATINGS
Lock System
Enables or disables the blocking scheme you set up previously.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
1
2
MENU
1
2
ENTER
5
6
8
9
PARENTAL CONTROL / RATING
132
4
5
• Lock System
: On
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Inpu
Inpu
p t Blockk
• Inpu
Inpu
p t Blockk
Select LOCK.
Input the password.
Select Lock System.
ENTER
ꔉ
ꔀ
• Block Channel
0
3
ꔂ Move
• Set Password
: On
3
4
7
LOCK
Select On or Off.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔉ Enter
□ Off
ꔉ
ꔑ On
ꔠ
ꔉ
When you select On, the Lock
System is enable.
CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that you do not want your children to watch.
Block Channel
LOCK
ꔂ Move
TV
3-1
• Set Password
• Lock System
Favorite Group: A
DTV
ꔉ Enter
page 1/1
Cable DTV
Cable TV
5-1
7-1
: On
• Block Channel
ꔉ
ꔀ
• Movie Rating
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
• Inpu
Inpu
p t Blockk
ꔉ CH.Change
ꔂ Navigation
ꘃ Page Change
ꕉ Previous
ꔅ Block/Unblock
1
MENU
2
1
2
ENTER
Select LOCK.
ꔛ
If a channel is locked, enter the
password to unlock it temporarily.
3
4
5
6
7
8
9
Input the password.
0
3
4
Select Block Channel.
ENTER
YELLOW
6
Block or unblock a channel.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PARENTAL CONTROL / RATING
5
Select a channel to block or unblock.
133
PARENTAL CONTROL / RATINGS
MOVIE & TV RATING
Movie Rating (MPAA)- For USA
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies.
You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such
as soap operas.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
ꔂ Move
• Set Password
: On
• Lock System
• Block Channel
• Movie Rating
: On
• Block Channel
ꔉ
ꔀ
• Movie Rating
ꔉ Enter
Blocking off : Permits all
programs
G
PG
• TV Rating-Children
PG-13
• TV Rating-General
R
• Downloadable Rating
NC-17
• Inpu
Inpu
p t Blockk
X
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
• Inpu
Inpu
p t Blockk
Blocking Off ꔓ
1
2
MENU
1
2
ENTER
Select LOCK.
3
4
5
6
7
8
9
Input the password.
0
PARENTAL CONTROL / RATING
134
3
4
ꔛ
ꔛ
ꔛ
ꔛ
Select Movie Rating.
ꔛ
ꔛ
ENTER
Select G, PG, PG-13, R, NC-17, X, or
Blocking Off.
ꔛ
ꔛ
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
If Movie Rating, TV Rating-Children
or TV Rating-General is locked, enter
the password to unlock it temporarily.
G (General audience)
PG (Parental guidance suggested)
PG-13 (Parents strongly cautioned)
R (Restricted)
NC-17 (No one 17 and under admitted)
X (Adult only)
Blocking Off (Permits all programs)
If you set PG-13: G and PG movies
will be available, PG-13, R, NC-17 and
X will be blocked.
TV Rating Children
- For USA
Prevents children from watching certain children's TV programs, according to the ratings limit set. The
children rating does not apply to other TV programs. Unless you block certain TV programs intended
for mature audiences in the TV Rating - sub menu, your children can view those programs.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
: On
• Lock System
• Block Channel
• TV Rating-Children
ENTER
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Inpu
Inpu
p t Block
pu
ock
• Inpu
Inpu
p t Block
pu
ock
Select LOCK.
ꔛ
ꔛ
2
1
2
: On
• Movie Rating
ꔉ
ꔀ
• TV Rating-General
MENU
ꔉ Enter
• Block Channel
• Movie Rating
1
ꔂ Move
• Set Password
Age
ꔉ
Fantasy Violence
Close
Age (applies to TV-Y, TV-Y7)
Fantasy Violence (applies to TV-Y7)
3
4
5
6
7
8
9
Input the password.
0
3
5
ENTER
Select Age or Fantasy Violence.
ENTER
Select block options.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PARENTAL CONTROL / RATING
4
Select TV Rating-Children.
135
PARENTAL CONTROL / RATINGS
TV Rating General
- For USA
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
ꔂ Move
: On
• Lock System
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-General
2
MENU
1
2
ENTER
5
6
8
9
ꔉ
ꔀ
• TV Rating-General Violence
• Downloadable Rating
• Inpu
Inp
p t Blockk
• Inpu
Inp
p t Blockk
Select LOCK.
Input the password.
ꔛ
ꔛ
PARENTAL CONTROL / RATING
136
ꔛ
Select TV Rating-General.
ꔛ
4
5
ENTER
Select Age, Dialogue, Language, Sex
or Violence.
ENTER
Select block options.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ
Dialogue
• Downloadable Rating
0
3
Age
Language
• TV Rating-Children Sex
3
4
7
: On
• Block Channel
• TV Rating-Children
1
ꔉ Enter
• Set Password
ꔛ
Close
Age (applies to TV-G,T V-PG,T V14,TV-MA).
Dialogue-sexual dialogue (applies to
TV-PG,TV-14).
Language-adult language (applies to
TV-PG, TV-14, TV-MA).
Sex-sexual situations (applies to
TV-PG, TV-14, TV-MA).
Violence (applies to TV-PG, TV-14,
TV-MA).
TV Rating English
- For CANADA, PHILIPPINES
Selecting Canadian English rating system.
LOCK
ꔂ Move
ꔉ Enter
ꔂ Move
• Lock System
: On
• TV Rating-English
: On
• Block Channel
• Block Channel
ꔉ
ꔀ
Blocking off : Permits all
programs
• TV Rating-English E
• TV Rating-French C
• TV Rating-French
• Key Lock
ꔉ Enter
• Set Password
• Set Password
• Lock System
LOCK
• Downloadable Rating
• Downloadable Rating
C8+
• Input Block
• Input Block
G
: Off
PG
: Off
• Key Lock
14+
18+
Blocking Off ꔓ
1
2
MENU
1
2
ENTER
Select LOCK.
ꔛ
3
4
5
6
7
8
9
Input the password.
0
ꔛ
ꔛ
3
ꔛ
ꔛ
4
ENTER
Select E, C, C8+, G, PG, 14+, 18+, or
Blocking Off.
ꔛ
ꔛ
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
PARENTAL CONTROL / RATING
Select TV Rating-English.
If TV Rating-English or TV RatingFrench is locked, enter the password
to unlocked it temporarily.
E (Exempt)
C (Children)
C8+ (Children eight years and older)
G (General programming, suitable
for all audiences)
PG (Parental Guidance)
14+ (Viewers 14 years and older)
18+ (Adult programming)
Blocking Off (Permits all programs)
137
PARENTAL CONTROL / RATINGS
TV Rating French - For CANADA, PHILIPPINES
Selecting Canadian French rating system.
LOCK
ꔂ Move
ꔉ Enter
• Lock System
LOCK
ꔂ Move
• Set Password
• Set Password
• Lock System
: On
: On
• Block Channel
• Block Channel
ꔉ
ꔀ
8ans+
• Downloadable Rating
13ans+
• Input Block
• Downloadable Rating
• Input Block
• Key Lock
: Off
Blocking off : Permits all
programs
• TV Rating-English E
• TV Rating-French G
• TV Rating-English
• TV Rating-French
ꔉ Enter
• Key Lock
: Off
16ans+
18ans+
Blocking Off ꔓ
1
MENU
ENTER
Select LOCK.
ꔛ
ꔛ
2
1
2
ꔛ
3
4
5
6
7
8
9
Input the password.
0
ꔛ
3
PARENTAL CONTROL / RATING
138
4
Select TV Rating-French.
ENTER
Select E, G, 8ans+, 13ans+, 16ans+,
18ans+, or Blocking Off.
ꔛ
ꔛ
ꔛ
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
E (Exempt)
G (General)
8ans+ (General-Not convenient for
little children)
13ans+ (Not convenient for children
of 13 years and younger)
16ans+ (Not convenient for children
of 16 years and younger)
18ans+ (This programs is only for
adults)
Blocking Off (Permits all programs)
DOWNLOADABLE RATING
This function is available only for digital channels.
This function operates only when TV has received Region5 Rating data.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
ꔂ Move
ꔉ Enter
• Set Password
: On
• Lock System
: On
• Block Channel
• Block Channel
• Movie Rating
• Movie Rating
ꔉ
Sport
Cruelty
• TV Rating-Children
Language
• TV Rating-General
Sadness
• Downloadable Rating
Genre
• Inpu
Inpu
p t Blockk
pu
Age
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
Humor
ꔉ
ꔀ
• Inpu
Inpu
p t Blockk
pu
ꔍ
Close
ꔛ
1
1
2
ENTER
Select LOCK.
3
4
5
6
7
8
9
Input the password.
0
3
4
5
Select Downloadable Rating.
ENTER
Select desired Downloadable Rating
option.
ENTER
Select desired option and block it.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
If a Downloadable rating is locked,
enter the password to unlock it temporarily.
PARENTAL CONTROL / RATING
2
MENU
Based on rating table, your TV's
OSD (On Screen Display) may differ slightly from what is shown in
this manual.
139
PARENTAL CONTROL / RATINGS
EXTERNAL INPUT BLOCKING
Enables you to block an input.
LOCK
ꔂ Move
• Lock
L k Sys
Syystem
tem
ꔉ Enter
: On
O
LOCK
• Lock
L k Sys
Syystem
tem
ꔉ Enter
: On
O
• Block Channel
• AV
• Block Channel
• Movie Rating
• Component
• Movie
Rating
Off
• TV Rating-Children
• TV Rating-Children
• RGB-PC
Off
• TV Rating-General
• Input Block
: Off
◀
• TV Rating-General
• HDMI1
• Downloadable Rating
• HDMI2
• Input
Block
• Downloadable Rating
• Key Lock
ꔂ Move
ꔉ
ꔀ
• Key Lock
: Off • HDMI3
1
2
MENU
1
2
ENTER
Select LOCK.
3
4
5
6
7
8
9
Input the password.
0
PARENTAL CONTROL / RATING
140
3
4
Select Input Block.
ENTER
5
Select input source.
Select On or Off.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Off
Off
Off
Close
i.e)
Off
▶
KEY LOCK
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
LOCK
ꔂ Move
• Lock
L k Sys
Syystem
tem
ꔉ Enter
1
2
MENU
1
2
ENTER
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
: Off
Select LOCK.
• Input Block
ꔠ
ꔉ
• Key Lock
ꔛ
5
6
8
9
Input the password.
0
4
Select LOCK.
ENTER
4
Select On or Off.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
: Off
□ Off
ꔑ On
ꔠ
ꔉ
In Key Lock ‘On’, if the TV is turned
off, press the / I, INPUT, CH (ꔌꔍor
ꕌꕍ) button on the TV or POWER,
INPUT, CH (ꕌꕍ) or NUMBER buttons on the remote control.
With the Key Lock On, the display
‘ ! Key Lock’ appears on the screen
if any button on the front panel is
pressed while viewing the TV.
PARENTAL CONTROL / RATING
3
ꔉ Enter
: On
O
• Block Channel
3
4
7
ꔂ Move
• Lock
L k Sys
Syystem
tem
: On
O
• Input Block
• Key Lock
LOCK
141
APPENDIX
APPENDIX
TROUBLESHOOTING
Abnormal Operation
ꔛ
The remote control
doesn’t work
ꔛ
ꔛ
ꔛ
ꔛ
TV turns off suddenly
ꔛ
ꔛ
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
*This feature is not available for all models.
Install new batteries.
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes.
Video Problems
ꔛ
ꔛ
No picture &No sound
ꔛ
ꔛ
ꔛ
Picture appears slowly
after switching on
APPENDIX
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
ꔛ
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
ꔛ
ꔛ
ꔛ
Horizontal/vertical bars
or picture shaking
ꔛ
Check for local interference such as an electrical appliance or power
tool.
ꔛ
Poor reception on
some channels
ꔛ
ꔛ
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Lines or streaks in pictures
ꔛ
Check antenna (Change the direction of the antenna).
ꔛ
If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no screen display. In this case use the latest cables that support
High Speed HDMI.
No picture when connecting HDMI
142
ꔛ
ꔛ
No or poor color or
poor picture
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
Audio Problems
No output from one
of the speakers
Unusual sound from
inside the product
No sound
when connecting
HDMI/USB
ꔛ
Adjust Balance in menu option.
ꔛ
A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault
with the product.
ꔛ
Check High Speed HDMI cable.
Check USB cable over version 2.0.
*This feature is not available for all models.
Use normal MP3 file.
ꔛ
ꔛ
PC Mode Problems
The signal is out of
range
Vertical bar or stripe
on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable or single color
ꔛ
Adjust resolution, horizontal frequency, or vertical frequency on the PC.
Check the input source.
ꔛ
Activate the Auto configure feature or adjust size, phase, or H/V position.
(Option)
ꔛ
Check the signal cable.
Reinstall the PC video card.
ꔛ
ꔛ
Check the manual for the video card in the PC to see if it supports
HDMI audio and how to set it up properly.
APPENDIX
When connecting the
HDMI cable to the PC,
there is no audio.
ꔛ
143
APPENDIX
Movie List Problems
The file does not
appear on the Movie
List.
ꔛ
Check whether the file extension is supported.
Message is displayed
saying “This file is
invalid” or the audio is
working normally but
the video is not working normally.
ꔛ
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the resolution is supported.
Check whether the video/audio codec is supported.
Check whether the frame rate is supported.
Message is displayed
saying “Unsupported
Audio” or the video is
working normally but
the audio is not working normally.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Subtitle is not working.
ꔛ
ꔛ
ꔛ
APPENDIX
144
Check whether the
file is damaged.)
Check whether the
Check whether the
Check whether the
file is playing normally on a PC. (Check whether the
audio codec is supported.
bit rate is supported.
sample rate is supported.
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the video file and subtitle file name are the same.
Check whether the video file and subtitle file are located in the same
folder.
Check whether the subtitle file is supported.
Check whether the language is supported. (When you open the subtitle
file on a PC, you can check the language of the subtitle file.)
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you
can enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s
almost dry, and then use it to wipe the screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
ꔛ
ꔛ
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
► If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
APPENDIX
145
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
With stand
471.2 mm x 365.9 mm x 155.4 mm
(18.5 inch x 14.4 inch x 6.1 inch)
542.9 mm x 407.1 mm x 155.4 mm
(21.3 inch x 16.0 inch x 6.1 inch)
Without stand
471.2 mm x 315.5 mm x 34.4 mm
(18.5 inch x 12.4 inch x 1.3 inch)
542.9 mm x 357.6 mm x 34.4 mm
(21.3 inch x 14.0 inch x 1.3 inch)
Weight
With stand
3.4 kg (7.4 lbs)
4.2 kg (9.2 lbs)
Without stand
3.2 kg (7.0 lbs)
3.9 kg (8.5 lbs)
Dimensions
(Width x
Height
x Depth)
Weight
26LE5300 (26LE5300-UE)
26LE5500 (26LE5500-UA)
With stand
652.0 mm x 480.8 mm x 191.4 mm
(25.6 inch x 18.9 inch x 7.5 inch)
Without stand
652.0 mm x 420.3 mm x 34.4 mm
(25.6 inch x 16.5 inch x 1.3 inch)
With stand
6.1 kg (13.4 lbs)
Without stand
5.1 kg (11.2 lbs)
Power Requirement
Adapter (DC Power)
19LE5300: 24 V
22LE5300: 24 V
22LE5500: 24 V
26LE5300: 24 V
26LE5500: 24 V
, 1.6 A
, 1.7 A
, 1.7 A
, 1.8 A
, 1.8 A
In: AC100-240 V ~ 50/60 Hz
Out: DC 24 V, 3.42 A
APPENDIX
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
146
22LE5300 (22LE5300-UE)
22LE5500 (22LE5500-UA)
Dimensions
(Width x
Height
x Depth)
MODELS
ꔛ
19LE5300 (19LE5300-UE)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
37LE5300
(37LE5300-UC)
Dimensions
(Width x
Height
x Depth)
With stand
784.6 mm x 558.1 mm x 221.0 mm
(30.8 inch x 21.9 inch x 8.7 inch)
905.0 mm x 630.0 mm x 270.0 mm
(35.6 inch x 24.8 inch x 10.6 inch)
Without stand
784.6 mm x 499.5 mm x 39.9 mm
(30.8 inch x 19.6 inch x 1.5 inch)
905.0 mm x 568.0 mm x 39.9 mm
(35.6 inch x 22.3 inch x 1.5 inch)
Weight
With stand
12.4 kg (27.3 lbs)
15.3 kg (33.7 lbs)
Without stand
10.5 kg (23.1 lbs)
12.8 kg (28.2 lbs)
42LE5300 (42LE5300-UC)
42LE530C (42LE530C-UC)
47LE5300 (47LE5300-UC)
47LE530C (47LE530C-UC)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
1016.0 mm x 692.0 mm x 270.0 mm
(40.0 inch x 27.2 inch x 10.6 inch)
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
Without stand
1016.0 mm x 630.0 mm x 29.3 mm
(40.0 inch x 24.8 inch x 1.1 inch)
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
Weight
With stand
19.2 kg (42.3 lbs)
22.6 kg (49.8 lbs)
Without stand
16.7 kg (36.8 lbs)
19.6 kg (43.2 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
55LE5300 (55LE5300-UC)
55LE530C (55LE530C-UC)
1306.0 mm x 867.0 mm x 345.0 mm
(51.4 inch x 34.1 inch x 13.5 inch)
1306.0 mm x 797.0 mm x 30.7 mm
(51.4 inch x 31.3inch x 1.2 inch)
With stand
34.05 kg (75.0 lbs)
Without stand
28.8 kg (63.4 lbs)
AC 100-240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
APPENDIX
Power Requirement
ꔛ
32LE5300
(32LE5300-UC)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
147
APPENDIX
42LE7300
(42LE7300-UA)
47LE7300
(47LE7300-UA)
1009.2 mm x 694.5 mm x 286.5 mm
(39.7 inch x 27.3 inch x 11.2 inch)
1119.6 mm x 757.1 mm x 286.5 mm
(44.0 inch x 29.8 inch x 11.2 inch)
1009.2 mm x 629.7 mm x 29.3 mm
(39.7 inch x 24.7 inch x 1.1 inch)
1119.6 mm x 691.3 mm x 29.3 mm
(44.0 inch x 27.2 inch x 1.1 inch)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Weight
With stand
25.5 kg (56.2 lbs)
29.7 kg (65.4 lbs)
Without stand
21.0 kg (46.2 lbs)
25.2 kg (55.5 lbs)
Without stand
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
With stand
1305.2 mm x 874.9 mm x 320.2 mm
(51.3 inch x 34.4 inch x 12.6 inch)
Without stand
1305.2 mm x 799.4 mm x 32.4 mm
(51.3 inch x 31.4 inch x 1.2 inch)
With stand
44.5 kg (98.1 lbs)
Without stand
37.1 kg (81.7 lbs)
Power requirement
AC 120 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
APPENDIX
148
Operating Temperature
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
ꔛ
55LE7300
(55LE7300-UA)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
32LD420
(32LD420-UA)
MODEL
Dimensions
(Width x
Height
x Depth)
With stand
Weight
With stand
805.0 mm x 583.0 mm x 224.0 mm
(31.6 inch x 22.9 inch x 8.8 inch)
Without stand
805.0 mm x 531.0 mm x 79.9 mm
(31.6 inch x 20.9 inch x 3.1 inch)
10.8 kg (23.8 lbs)
Without stand
9.7 kg (21.3 lbs)
MODELS
47LD420
(47LD420-UA)
Dimensions
(Width x
Height
x Depth)
With stand
1028.0 mm x 715.4 mm x 297.0 mm
(40.4 inch x 28.1 inch x 11.6 inch)
1140.6 mm x 784.8 mm x 337.4 mm
(44.9 inch x 30.8 inch x 13.2 inch)
Without stand
1028.0 mm x 658.6 mm x 87.8 mm
(40.4 inch x 25.9 inch x 3.4 inch)
1140.6 mm x 722.9 mm x 99.0 mm
(44.9 inch x 28.4 inch x 3.8 inch)
Weight
With stand
16.6 kg (36.5 lbs)
21.6 kg (47.6 lbs)
Without stand
14.8 kg (32.6 lbs)
19.0 kg (41.8 lbs)
32LD450 (32LD450-UA)
37LD450 (37LD450-UA),
37LD450C (37LD450C-UA)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
799.0 mm x 555.0 mm x 207.0 mm
(31.4 inch x 21.8 inch x 8.1 inch)
916.0 mm x 625.0 mm x 261.0 mm
(36.0 inch x 24.6 inch x 10.2 inch)
Without stand
799.0 mm x 506.0 mm x 73.5 mm
(31.4 inch x 19.9 inch x 2.8 inch)
916.0 mm x 575.0 mm x 77.4 mm
(36.0 inch x 22.6 inch x 3.0 inch)
Weight
With stand
9.1 kg (20.0 lbs)
12.5 kg (27.5 lbs)
Without stand
8.1 kg (17.8 lbs)
10.8 kg (23.8 lbs)
42LD450 (42LD450-UA),
42LD450C (42LD450C-UA)
47LD450 (47LD450-UA),
47LD450C (47LD450C-UA)
MODELS
With stand
1023.0 mm x 685.0 mm x 261.0 mm
(40.2 inch x 26.9 inch x 10.2 inch)
1136.0 mm x 757.0 mm x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch)
Without stand
1023.0 mm x 635.0 mm x 76.6 mm
(40.2 inch x 25.0 inch x 3.0 inch)
1136.0 mm x 698.0 mm x 76.5 mm
(44.7 inch x 27.4 inch x 3.0 inch)
Weight
With stand
15.1 kg (33.2 lbs)
19.5 kg (42.9 lbs)
Without stand
13.5 kg (29.7 lbs)
17.5 kg (38.5 lbs)
Power requirement
AC 100-240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
Environment
condition
Operating Temperature
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
APPENDIX
Dimensions
(Width x
Height
x Depth)
External Antenna Impedance
ꔛ
42LD420
(42LD420-UA)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
149
APPENDIX
32LD520
(32LD520-UA)
42LD520
(42LD520-UA)
With stand
815.0 mm x 585.6 mm x 210.9 mm
(32.0 inch x 23.0 inch x 8.3 inch)
1052.2 mm x 720.1 mm x 270.6 mm
(41.4 inch x 28.3 inch x 10.6 inch)
Without stand
815.0 mm x 529.6 mm x 82.0 mm
(32.0 inch x 20.8 inch x 3.2 inch)
1052.2 mm x 657.3 mm x 90.8 mm
(41.4 inch x 25.8 inch x 3.5 inch)
With stand
12.6 kg (27.7 lbs)
19.0 kg (41.8 lbs)
Without stand
11.4 kg (25.1 lbs)
17.2 kg (37.9 lbs)
47LD520
(47LD520-UA)
55LD520 (55LD520-UA),
55LD520C (55LD520C-UA)
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
1173.4 mm x 791.4 mm x 319.0 mm
(46.1 inch x 31.1 inch x 12.5 inch)
1357.0 mm x 901.0 mm x 423.0 mm
(53.4 inch x 35.4 inch x 16.6 inch)
Without stand
1173.4 mm x 723.4 mm x 100.8 mm
(46.1 inch x 28.4 inch x 3.9 inch)
1357.0 mm x 835.4 mm x 109.6 mm
(53.4 inch x 32.8 inch x 4.3 inch)
Weight
With stand
23.6 kg (52.0 lbs)
36.4 kg (80.2 lbs)
Without stand
20.8 kg (45.8 lbs)
32.9 kg (72.5 lbs)
42LD630
(42LD630-UC)
47LD630
(47LD630-UC)
1024.0 mm x 685.0 mm x 261.0 mm
(40.3 inch x 26.9 inch x 10.2 inch)
1137.0 mm x 758.0 mm x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch)
1024.0 mm x 621.0 mm x 76.8 mm
(40.3 inch x 24.4 inch x 3.0 inch)
1137.0 mm x 685.0 mm x 76.8 mm
(44.7 inch x 26.9 inch x 3.0 inch)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Weight
With stand
15.5 kg (34.1 lbs)
20.3 kg (44.7 lbs)
Without stand
13.9 kg (30.6 lbs)
18.3 kg (40.3 lbs)
Without stand
MODELS
APPENDIX
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
1329.0 mm x 796.0 mm x 96.5 mm
(52.3 inch x 31.3 inch x 3.7 inch)
33.0 kg (72.7 lbs)
Without stand
29.8 kg (65.6 lbs)
Power requirement
AC 100-240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
Environment
condition
Operating Temperature
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
150
1329.0 mm x 872.0 mm x 330.0 mm
(52.3 inch x 34.3 inch x 12.9 inch)
With stand
External Antenna Impedance
ꔛ
55LD630
(55LD630-UC)
Less than 85 %
The specifications shown above may be changed without prior notice for quality improvement.
IR CODE
Code Function
(Hexa)
Note
Code
(Hexa)
Function
Note
00
CH ꕌ
Remote Control Button
B0
ꕖ
Remote Control Button
01
CH ꕍ
Remote Control Button
B1
ꕗ
Remote Control Button
02
VOL +
Remote Control Button
BA
ꕘ
Remote Control Button
03
VOL -
Remote Control Button
D6
TV
Discrete IR Code
06
>
Remote Control Button
07
<
Remote Control Button
C4
POWER ON
Remote Control Button
08
(Power On/Off)
09
MUTE
Remote Control Button
0B
INPUT
Remote Control Button
0F
TV
Remote Control Button
10-19
Number 0-9
Remote Control Button
1A
FLASHBK
Remote Control Button
1E
FAV/MARK
Remote Control Button
28
BACK
Remote Control Button
30
AV MODE
Remote Control Button
40
ꕌ
Remote Control Button
41
ꕍ
Remote Control Button
43
MENU
Remote Control Button
44
ENTER
Remote Control Button
Q.MENU
Remote Control Button
4C
- (Dash)/LIST
Remote Control Button
5B
EXIT
Remote Control Button
61
BLUE
Remote Control Button
63
YELLOW
Remote Control Button
71
GREEN
Remote Control Button
72
RED
Remote Control Button
79
RATIO
Remote Control Button
7E
SIMPLINK
Remote Control Button
8E
ꕙ
Remote Control Button
8F
ꕚ
Remote Control Button
95
ENERGY SAVING Remote Control Button
AA
INFO
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
5A
AV or AV1
Discrete IR Code
D0
AV2
Discrete IR Code
BF
COMPONENT
Discrete IR Code
(Only Power Off)
(AV1 Input Selection)
(AV2 Input Selection)
(Component Input Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
CE
HDMI1
Discrete IR Code
CC
HDMI2
Discrete IR Code
E9
HDMI3
Discrete IR Code
(HDMI1 Input Selection)
(HDMI2 Input Selection)
(HDMI3 Input Selection)
DA
HDMI4
Discrete IR Code
76
Ratio 4:3
Discrete IR Code
77
Ratio 16:9
Discrete IR Code
AF
Ratio Zoom
Discrete IR Code
(HDMI4 Input Selection)
APPENDIX
45
ꔛ
(TV Input Selection)
(Only 4:3 Mode)
(Only 16:9 Mode)
(Only Zoom Mode)
Remote Control Button
Use this feature depending on your models.
151
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as
a computer or an A/V control system) to control the TV’s functions externally.
ꔛ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and
software.
The instructions below are provided to help with programming software or to test functionality using
telenet software.
RS-232C Setup
DC-IN
/DVI IN
i.e)
1
2
RS-232C IN
(DVI)
(CONTROL&SERVICE)
OPTICAL
AUDIO IN DIGITAL
RGB/DVI AUDIO OUT
AV IN
VIDEO L(MONO) AUDIO R
RGB IN (PC)
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
R
ANTENNA/
CABLE IN
PC
Type of Connector; D-Sub 9-Pin Male
No.
APPENDIX
152
1
2
3
4
5
6
7
8
9
Communication Parameters
Baud rate : 9600 bps (UART)
Data length : 8 bits
ꔛ Parity : None
ꔛ Stop bit : 1 bit
ꔛ Communication code : ASCII code
ꔛ Use a crossed (reverse) cable.
ꔛ
Pin Name
ꔛ
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
! NOTE
►This product has command echo back in
the RS-232C Command.
No Connection
1
5
6
9
RS-232C Configurations
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
TV
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
PC
TV
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
OPTION
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
• Power Indicator
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔉ
ꔀ
◀
• Set ID
:1
• Mode Setting
: Home Use
1
▶
Close
ꔛ
MENU
2
3
ENTER
ENTER
4
Select OPTION.
Real data mapping
0
Step 0
A
Step 10 (Set ID 10)
F
Step 15 (Set ID 15)
10
Step 16 (Set ID 16)
63
Step 99 (Set ID 99)
64
Step 100
APPENDIX
1
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is
1~ 99.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
153
APPENDIX
Command Reference List
COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 - 01
02. Input Select
x
b
► P.155
03. Aspect Ratio
k
c
► P.155
04. Screen Mute
k
d
00 - 01
05. Volume Mute
k
e
00 - 01
06. Volume
Control
k
f
00 - 64
07. Contrast
k
g
00 - 64
08. Brightness
k
h
00 - 64
09. Color
k
i
00 - 64
10. Tint
k
j
00 - 64
11. Sharpness
k
k
00 - 64
12. OSD Select
k
l
00 - 01
13. Remote
Control Lock
Mode
k
m
00 - 01
14. Treble
k
r
00 - 64
15. Bass
k
s
00 - 64
APPENDIX
16. Balance
k
t
00 - 64
17. Color
Temperature
x
u
00 - 64
18. Energy Saving j
q
► P.156
19. Auto
Configuration
j
u
► P.156
21. Channel Add/
Del
m
b
00 - 01
22. Key
m
c
► P.157
23. Backlight
m
g
00 - 64
COMMAND1
20.
Channel
Tuning
154
Transmission / Receiving Protocol
COMMAND1
COMMAND2
DATA00
(Hexadecimal)
DATA01
(Hexadecimal)
m
a
physical
program
high
major
program
low
DATA02
(Hexadecimal)
DATA03
(Hexadecimal)
DATA04
(Hexadecimal)
DATA05
(Hexadecimal)
major low
minor
high
minor low
attribute
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set. (j,
k, m or x)
[Command 2] : Second command to control the
set.
[Set ID] : You can adjust the set ID to choose
desired TV ID number in Setup menu.
Adjustment range is 1-99. When selecting
Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal
(1-99) on menu and as Hexa decimal (0x0
- 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of
command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the
standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[NG] : Use the large character
05. Volume Mute (Command: k e)
01. Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command: x b)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
To select input source for TV.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Data 20: AV or AV1
Data 21: AV 2
Data 40: Component or Component1
Data 41: Component2
07. Contrast (Command: k g)
Data 60: RGB-PC
Data 90: HDMI1
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Data 91: HDMI2
Data 92: HDMI3
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data 93: HDMI4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
* Use the feature depending on your model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data 09: Just scan
Data 02: 16:9
Data 10: Cinema Zoom1
Data 06: Set by program
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Data 1F: Cinema Zoom16
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d)
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
To select screen mute on/off.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on), Video-out Mute off
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 01: Screen mute on (Picture off)
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
Data 04: Zoom
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute
on, TV will not display On Screen Display (OSD).
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 - Green: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
155
APPENDIX
11. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command: x u)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
18. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn
on by POWER button of remote control and on the
TV.
Data 00: Energy saving - off
01: Energy saving - Minimum
02: Energy saving - Medium
03: Energy saving - Maximum
04: Energy saving - Auto (depending on model)
05: Energy saving - Screen off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
19. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in
RGB-PC mode.
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
APPENDIX
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
20. Channel Tuning (Command: m a)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
156
Data 01: To set
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
To tune channel to following physical/major/minor number.
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel to the Major number, the Physical
number is not required when sending a command.
Data 00: Physical Channel Number
NTSC air: 02 - 45, NTSC cable: 01, 0E - 7D
ATSC air: 01 - 45, ATSC cable: 01 - 87
Data 01 & 02: Major Channel Number
Data 01: High byte
Data 02: Low byte
Two bytes are available for the Major and Minor,
normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
Data5: 7
4
Reserved
][Set ID][ Step
][OK][Data00]
3 Acknowledgement[a][
2
1
0
[Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ]
[NG][Data00][x]
6
5
Main/Sub
Picture
Two/One Part
Channel
Using Physical
Channel
0 Main
0 Two
0 Use
x
0
0
0
0
NTSC Air
1 Sub
1 One
1 No Use
x
0
0
0
1
NTSC Cable
x
0
0
1
0
ATSC Air
x
0
0
1
1
ATSC Cable_std
x
0
1
0
0
ATSC Cable_hrc
x
0
1
0
1
ATSC Cable_irc
x
0
1
1
0
ATSC cable_auto
x
0
1
1
1
Reserved
x
x
x
x
x
...
x
1
1
1
1
Reserved
The table above lists the binary code which must be
converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an
NTSC cable channel is “1000 0001”, which translates
to “81” in Hex.
* 7th bit : For which source do you want to change the
channel.
* 6th bit: Use a two part or one part channel. Most
cases just use 0 since it’s ignored when using
NTSC.
* 5th bit: Use 0 with NTSC since it can only use the
physical channel number. Normally use 1 for ATSC
since most times it doesn’t matter what the physical
number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
1. Tune to the analog (NTSC) cable channel 35.
Data 00 = Physical of 35 = 23
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
22. Key (Command: m c)
To send IR remote control code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
See page 151.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by
POWER button of remote control only.
23. Backlight (Command: m g)
To adjust screen backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data 01 & 02 = No Major = 00 00
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
Data 03 & 04 = No Minor = 00 00
*Refer to ‘Real data mapping’.
Data 05 = 0000 0001 in binary = 01
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
*Tune Command Examples:
21. Channel Add/Del (Command: m b)
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
157
APPENDIX
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/
LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, gdbserver, jfsutils, mtd-utils, procps, u-boot, udhcpc
LGPL LIBRARIES:
cairo, directFB, gettext, glib, glibc, iconv, pixman
MPL LIBRARIES:
Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG
Electronics at: opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
APPENDIX
This product includes
► expat:
- copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
- copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
► freetype: copyright © 2003 The FreeType Project (www.freetype.org).
► ICU: copyright © 1995-2008 International Business Machines Corporation and others.
► libcurl: copyright © 1996 - 2008, Daniel Stenberg.
► libjpeg: This software is based in part on the work of the Independent JPEG Group copyright © 1991
– 1998, Thomas G. Lane.
► libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
► libpng: copyright © 1998-2008 Glenn Randers-Pehrson
► md5: copyright © 1991-2, RSA Data Security, Inc
► md5 checksum : copyright © 1999, 2000, 2002 Aladdin Enterprises
► ncurses: copyright © 1998 Free Software Foundation, Inc.
► openSSL:
- cryptographic software written by Eric Young.
- software written by Tim Hudson.
- software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
► strace :
- copyright © 1991, 1992 Paul Kranenburg.
- copyright © 1993 Branko Lankester.
- copyright © 1993 Ulrich Pegelow.
- copyright © 1995, 1996 Michael Elizabeth Chastain.
- copyright © 1993, 1994, 1995, 1996 Rick Sladkey.
- copyright © 1998-2003 Wichert Akkerman.
- copyright © 2002-2008 Roland McGrath.
- copyright © 2003-2008 Dmitry V. Levin.
- copyright © 2007-2008 Jan Kratochvil.
► tinyxml: copyright © 2000-2006 Lee Thomason
► xyssl: Copyright (C) 2009 Paul Bakker
► zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, subject to the following
conditions:
158
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
APPENDIX
159
OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
The model and serial number of the TV is located
on the back and/or one side of the TV.
Record it below should you ever need service.
LED LCD TV MODELS
19LE5300 32LE5300
22LE5300 37LE5300
26LE5300 42LE5300
22LE5500 47LE5300
26LE5500 55LE5300
42LE7300
47LE7300
55LE7300
42LE530C
47LE530C
55LE530C
MODEL
SERIAL
P/NO :MFL62882739 (1009-REV01)
LCD TV MODELS
32LD420 32LD450
42LD420 37LD450
47LD420 42LD450
47LD450
37LD450C
42LD450C
47LD450C
32LD520 42LD630
42LD520 47LD630
47LD520 55LD630
55LD520
55LD520C
www.lg.com
Download PDF