LG | 55LE7500 | LG 32LE5500 Owner’s Manual

OWNER’S MANUAL
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
LED LCD TV / LCD TV
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD TV MODELS
LCD TV MODELS
PLASMA TV MODELS
32LE5500
42LE5500
47LE5500
55LE5500
42LE5550
42LE8500
47LE8500
32LD650
42LD650
47LD650
55LD650
50PK950R
60PK950R
32LE7500
42LE7500
47LE7500
55LE7500
42LX6500
47LX6500
P/NO : MFL62883018 (1101-REV02)
www.lg.com
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK. DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
9
Heed all warnings.
Follow all instructions.
1
Do not use this apparatus
near water.
2
Clean only with dry cloth.
3
Do not block any ventilation
openings. Install in accordance
with
the
manufacturer’s
instructions.
4
Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
5
Protect the power cord from
being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the
apparatus.
6
Only use attachments/accessories specified by the manufacturer.
7
Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.
8
Unplug this apparatus during
lighting storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
10
Never touch this apparatus or antenna during a thunder or lighting storm.
11
When mounting a TV on the wall, make sure
not to install the TV by the hanging power
and signal cables on the back of the TV.
12
Do not allow an impact shock or any objects
to fall into the product, and do not drop
onto the screen with something.
13
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or
damaged or cracked wire insulation are
dangerous . Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized
servicer. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where the
cord exits the appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug
when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
3
SAFETY INSTRUCTIONS
14
15
16
WARNING - To reduce the risk
of fire or electrical shock, do not
expose this product to rain,
moisture or other liquids. Do
not touch the TV with wet
hands. Do not install this product near flammable objects
such as gasoline or candles or
expose the TV to direct air
conditioning.
Do not expose to dripping or
splashing and do not place
objects filled with liquids, such
as vases, cups, etc. on or over
the apparatus (e.g. on shelves
above the unit).
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV with
a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If
grounding methods are not possible, have a
qualified electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
4
17
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
18
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
19
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may
occur. Do not clean with chemicals such as
alcohol, thinners or benzene.
20
Moving
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press against or put
stress on the front panel of the TV.
21
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
22
Take care not to touch the ventilation openings. When watching the TV for a long
period, the ventilation openings may
become hot.
23
If you smell smoke or other odors coming
from the TV, unplug the power cord and contact and authorized service center.
24
Do not press strongly upon the
panel with hand or sharp object
such as nail, pencil or pen, or
make a scratch on it.
25
Keep the product away from direct sunlight.
26
Dot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to
six million pixels. In a very few cases, you
could see fine dots on the screen while
you’reviewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
27
Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal deformation
is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies
depending on the product.
This generated sound does not affect the performance and reliability of the product.
28
For LED LCD TV/LCD TV
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor’s performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
29
Viewing 3D Imaging (For 3D TV)
►When viewing 3D imaging, watch the TV
from an effective viewing angle and within the appropriate distance. If you exceed
this viewing angle or distance, you may not
be able to view the 3D imaging. Furthermore, the 3D imaging may not display if it
is viewed while you are lying down.
►If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.
►Watching the TV or playing video games
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.
►Pregnant woman, seniors, persons with
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.
►Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
► Please prevent children under the age of 5
from watching 3D TV. It may affect their vision development.
►Warning for photosensitization seizure:
Some viewers may experience a seizure
or epilepsy when exposed to certain factors, including flashing lights or images in
TV or video games. If you or anybody from
your family has a history of epilepsy or seizure, please consult with your doctor before
watching 3D TV.
Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the
following symptoms, immediately stop
watching the 3D imaging and consult a
doctor: dizziness or lightheadedness, visual transition or altered vision, visual or
facial instability, such as eye or muscle
twitching, unconscious action, convulsion,
loss of conscience, confusion or disorientation, loss of directional sense, cramps,
or nausea. Parents should monitor their
children, including teenagers, for these
symptoms as they may be more sensitive
to the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D
TV.
- For those who have vision that is different in each eye, they should watch the
TV after taking vision correction measures.
- Watch the TV so that your eyes are on
the same level as the 3D screen and
refrain from sitting too closely to the TV
- Do not watch the 3D imaging when
tired or sick, and avoid watching the 3D
imaging for a long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on
a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness of your situation before moving.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product
contains a small amount of mercury. Do
not dispose of this product with general
household waste. Disposal of this product
must be carried out in accordance to the
regulations of your local authority.
5
CONTENTS
WARNING / CAUTION ................................2
SAFETY INSTRUCTIONS ..........................3
FEATURE OF THIS TV................................ 8
PREPARATION
Accessories .............................................................9
Optional Extras ....................................................10
Front Panel Information ..................................... 11
Back Panel Information ..................................... 13
Stand Instructions................................................16
VESA Wall Mounting ........................................20
Cable Management ........................................... 21
Desktop Pedestal Installation .........................23
Swivel Stand ........................................................23
Attaching the TV to a desk.............................24
Kensington Security System ..........................24
Securing the TV to the wall to prevent falling
when the TV is used on a stand ...................25
Antenna or Cable Connection .......................26
Channel Selection..............................................56
Volume Adjustment ..........................................56
Initial Setting ....................................................... 57
On-Screen Menus Selection ..........................58
Quick Menu .......................................................... 61
Customer Support
-Software Update .......................................62
-Picture Test/Sound Test ..........................63
-Diagnostics .................................................63
-Product/Service Info. ...............................64
-Network Test. ..............................................64
Simple Manual ....................................................65
Channel Setup
-Auto Scan (Auto Tuning) ........................66
-Add/Delete Channel (Manual Tuning) 67
-Channel Editing .........................................68
Favorite Channel Setup .................................... 69
Favorite Channel List ........................................ 69
Channel List ........................................................ 70
Input List ............................................................... 71
Input Label............................................................ 71
Mode Setting ...................................................... 72
Demo Mode ........................................................ 72
Reset to Factory Default(Initial Setting)....... 73
System Color ....................................................... 73
AV Mode ............................................................... 74
Game ..................................................................... 74
Simplink ................................................................ 75
EPG ........................................................................ 76
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup ............................................ 27
DVD SETUP .........................................................30
VCR SETUP .........................................................33
Other A/V Source Setup .................................35
USB Connection ................................................36
Headphone Setup .....................................................36
Audio Out Connection ..................................... 37
External Equipment Wireless Connection
(Optional Extra) ...................................................38
PC Setup ..............................................................39
Network Setup ....................................................44
BLUETOOTH
Bluetooth? ........................................................... 80
Setting the Bluetooth ........................................ 81
Connecting the Bluetooth Headset ............82
Remove the Bluetooth Device .......................84
My Bluetooth Information ................................85
Viewing the Photos with Bluetooth Device ......86
Listening the Musics with Bluetooth Device ...86
3D IMAGING
WATCHING TV / CHANNEL CONTROL
Remote Control Functions ..............................52
Turning on the TV ..............................................56
6
3D Technology .................................................... 87
Watching 3D Imaging ......................................88
MY MEDIA
Entry Mode ..........................................................90
Connection Method ........................................... 91
Movie List .............................................................96
Photo List ........................................................... 103
Music List ........................................................... 109
DivX Registration Code ................................... 114
Deactivation ........................................................ 115
NETWORK
SOUND & LANGUAGE CONTROL
Auto Volume....................................................... 141
Clear Voice II ..................................................... 142
Balance ............................................................... 143
Preset Sound Settings (Sound Mode) ...... 144
Sound Setting Adjustment - User Mode . 145
Audio Reset ....................................................... 146
TV Speakers On/Off Setup .......................... 146
Digital Audio Out ..............................................147
Stereo/SAP Broadcast Setup ...................... 148
DTV Audio Setting .......................................... 148
ON-Screen Menus Language Selection... 149
Caption Mode ................................................... 149
Language Selection ........................................ 150
Legal Notice ....................................................... 116
TIME SETTING
NETCAST
Netcast Menu..................................................... 118
Weather Information ........................................ 119
Photo Album ..................................................... 120
Video Online ....................................................... 121
EMOL .................................................................. 123
BAZUCA............................................................. 124
TERRATV............................................................ 125
PICTURE CONTROL
Picture Size (Aspect Ratio) Control............ 126
Picture Wizard ................................................... 128
ꕊ Energy Saving ............................................ 130
Preset Picture Settings (Picture Mode) ...... 131
Manual Picture Adjustment - User Mode 132
Picture Improvement Technology (Advanced
Control) .............................................................. 133
Expert Picture Control .................................... 134
Picture Reset ......................................................137
TruMotion ........................................................... 138
LED Local Dimming ........................................ 139
Power Indicator ................................................ 139
Image Sticking Minimization (ISM) Method. .....140
Clock Setting...................................................... 151
On/Off Time Setting ....................................... 152
Sleep Timer Setting ........................................ 153
PARENTAL CONTROL
Set Password & Lock System
-Setting up Your Password ................... 154
-Set Password .......................................... 155
-Lock System............................................ 156
Channel Blocking ..............................................157
External Input Blocking .................................. 158
Key Lock ............................................................. 159
APPENDIX
Troubleshooting ................................................ 160
Maintenance ...................................................... 163
Product Specifications ................................... 164
IR Codes ..............................................................167
External Control Through RS-232C .......... 168
Open Source Software Notice ......................175
7
FEATURE OF THIS TV
ꔛ
Some of these features are not available on all models.
Manufactured under license from
Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of
Dolby Laboratories.
Listen to TV with wireless headset,
or enjoy viewing your mobile phone
photos on your TV.
(This is not available for all models.)
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC."
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order
to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate
the DivX VOD section in the device setup
menu. Go to vod.divx.com with this code to
complete the registration process and learn
more about DivX VOD.
“DivX Certified® to play DivX® video up to HD
1080p, including premium content.”
“DivX®, DivX Certified® and associated logos
are trademarks of DivX, Inc. and are used
under license.”
“Pat. 7,295,673; 7,460,668; 7,515,710;
7,519,274”
IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN
ꔛ
ꔛ
ꔛ
8
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
PREPARATION
ACCESSORIES
EN
ER
GY
4 GH
ST
VO
RA
TI
LE
TE
/NU
O
9 WX
6 MN
HT
3 DE
F
O
YZ
HB
K
AR
TE
LIG
INP
TV
C
AS
FA RK
V
CH
DE
MU
U
FL
MA
L
MEN
8 TU
MO
UT
2AB
L
V
0
LI
DE
G
5 JK
I
RS
AV
SA
VIN
1
7PQ
M
CH
E
A
G
P
Q.
ME
NU
EN
TE
R
BA
CK
EX
IT
IN
FO
1.5V 1.5V
RF Adapter
(Some models)
FR
EE
ZE
Owner’s Manual
Nero MediaHome 4
Essentials CD
Remote Control,
Batteries (AAA)
(Some models)
You must connect it to the antenna
wire after fixing in Antenna Input.
This adapter is only supplied in
Argentina.
Option Extras
Not included with all models
* Wipe spots on the exterior only
with the polishing cloth.
Polishing Cloth
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
* Do not wipe roughly when removing stain. Excessive pressure may
cause scratch or discoloration.
D-sub 15 pin Cable
When using the VGA (D-sub 15
pin cable) PC connection, the
user must use shielded signal
interface cables with ferrite cores
to maintain standards compliance.
32/42/47/55LE5500, 42LE5550, 32/42/47/55LE7500, 42/47LE8500, 42/47LX6500
(Other models)
(For 55LE5500, 55LE7500)
x4
x8
(M4 x 24) (M4 x 16)
(M4 x 20)
x8
(M4 x 16)
(42/47LE8500)
x4
x2
Cable Holder Component gender cable,
AV gender cable
(Refer to p.22)
Screws for stand assembly
(Refer to P.18)
(For 32/42/47/55LE7500)
(For 32LE5500, (For 42/47LX6500)
32LE7500)
Cleansing Cloths
(mitt)
Screw for
stand fixing
(Refer to
P.24)
* Wipe spots on the exterior only with the cleansing cloths.
3D Glasses
* Do not wipe roughly when removing stains. Excessive pressure may cause scratches or
discoloration.
* For cleaning front frame, please slowly wipe in one direction after spraying water 1-2 times
on cleansing cloths. Please remove excessive moisture after cleaning. Excessive moisture
may cause water stains on the frame.
32/42/47/55LD650
(For 32/42LD650)
x8
(M4 x 20)
Screws for stand assembly
(Refer to P.16)
Screw for stand fixing
(Refer to P.24)
Protection Cover
(Refer to P.16)
Power Cord
9
PREPARATION
Plasma TV
PREPARATION
(For 50PK950R)
x4
x2
x4
(M4 x 14) (M4 x 28)
Screws for stand assembly
(Refer to P.17)
Cable Holder
(Refer to P.22)
Power Cord
Protection Cover
(Refer to P.17)
(For50/60PK950R)
W
PO
ER
T
PU
/IN
TV
L
VO
CH
1.5V 1.5V
IEW
Q.V
Remote Control,
Batteries (AAA)
(Some models)
Cable
Management Clip
OPTIONAL EXTRAS
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV, LCD TV or PLASMA TV.
Wireless Media Box
(AN-WL100W)
10
Wireless LAN for Broadband/
DLNA Adaptor
(AN-WF100)
FRONT PANEL INFORMATION
Image shown may differ from your TV.
CHANNEL
(ꕌ,ꕍ) Buttons
CH
32/42/47/55LD650
VOLUME (+, -)
Buttons
VOL
PREPARATION
ꔛ
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
POWER Button
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power Indicator in the
OPTION menu.►p.139)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions
42/47LE8500
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
SPEAKER
Touch Button
You can operate the button just by touching the button lightly with your finger.
CH
CHANNEL
(ꕍ,ꕌ)
Buttons
VOL
VOLUME
(-, +)
Buttons
ENTER
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
Power/Standby Indicator
(Can be adjusted using the
Power Indicator in the
OPTION menu.►p.139)
11
PREPARATION
32/42/47/55LE5500, 42LE5550, 32/42/47/55LE7500, 42/47LX6500
PREPARATION
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.►p.139)
SPEAKER
Emitter
(For 42/47LX6500)
It is the part equipped with
the emitter exchanging signal with 3D glasses.
Please be careful not to
block the screen with objects
or people while watching a
3D Video.
Touch Button
Light the button by touching first. At this time, you can use the desired button.
CH
VOL
ENTER
CHANNEL VOLUME
(-, +)
(ꕍ,ꕌ)
Buttons
Buttons
MENU
INPUT
ENTER MENU INPUT POWER
Button Button Button Button
50/60PK950R
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
The lighting is off while the TV remains on.
SPEAKER
Touch Button
You can operate the button just by touching the button lightly with your finger.
INPUT
MENU
ENTER
POWER INPUT MENU ENTER
Button Button Button Button
12
VOL
VOLUME
(+, -)
Buttons
CH
CHANNEL
(ꕌ,ꕍ)
Buttons
BACK PANEL INFORMATION
PREPARATION
ꔛ
Image shown may differ from your TV.
AC IN
12
USB IN 2
CABLE MANAGEMENT
2
3
4
1
2
3
4
11
IN 3
1
32/42/47/55LD650-DA
USB IN 1
32/42/47/55LD650-MA
RGB IN (PC)
/DVI IN
AUDIO OUT
1
2
WIRELESS
CONTROL
Y
PB
PR
L
R
1
AUDIO
VIDEO
9
2
6
1
RGB/DVI OPTICAL DIGITAL
AUDIO IN
AUDIO OUT
/DVI IN
WIRELESS
CONTROL
2
Y
PB
PR
L
R
1
ANTENNA/
CABLE IN
8
5
VIDEO L(MONO) AUDIO R
AUDIO
VIDEO
9
7
8
AV IN 1 COMPONENT IN
AUDIO IN
1
LAN
5
VIDEO L(MONO) AUDIO R
AV IN 1 COMPONENT IN
RGB/DVI OPTICAL DIGITAL
2
RS-232C IN
(CONTROL & SERVICE)
6
ANTENNA CABLE IN
IN
H/P
LAN
RS-232C IN
(CONTROL & SERVICE)
10
VIDEO L/MONO AUDIO R
RGB IN (PC)
3
AV IN 2
7
50/60PK950R
USB IN 2
12
2
3
5
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
(CONTROL&SERVICE)
RGB IN (PC)
AUDIO IN
(RGB/DVI)
2
1
/DVI IN
COMPONENT IN
LAN
2
Y
PB
PR
L
R
ANTENNA
/CABLE
IN
1
AUDIO
VIDEO
8
2
6
7
VIDEO L/MONO AUDIO R
VIDEO L/MONO AUDIO R
3
1
AV IN 1
IN 4
WIRELESS
CONTROL
10
4
USB IN 1
9
6
AV IN 2
13
PREPARATION
PREPARATION
32/42/47/55LE5500-MA, 32/42/47/55LE7500-MA, 42/47LE8500-MA
USB IN 2
12
4
RGB IN (PC)
(CONTROL & SERVICE)
RS-232C IN
/DVI IN
8
3
5
2
AUDIO IN
1
᫼
AUDIO OUT
2
WIRELESS
CONTROL
Y
PB
PR
L
R
1
AUDIO
VIDEO
9
6
11
ANTENNA/
CABLE IN
8
2
7
2
3
4
RGB IN (PC)
(CONTROL & SERVICE)
6
CAUTION
32/42/47/55LE5500-DA, 42LE5550-DA, 42/47LX6500,
42/47LE8500-DA
1
H/P
VIDEO L(MONO) AUDIO R
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
IN 4
LAN
AV IN2
VIDEO / AUDIO
3
COMPONENT IN3
AUDIO / Y PB PR
2
USB IN 1
10
1
RS-232C IN
For HDMI IN 4 and USB IN
1/2
► For an optimal connection,
HDMI cables and USB
devices should have bezels
less than 0.39 inches (10
mm) thick.
/DVI IN
LAN
3
AUDIO IN
1
᫼
WIRELESS
CONTROL
5
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
9
14
8
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
2
6
ANTENNA
IN
7
CABLE IN
*A
0.39 inches (10 mm)
LAN
Network connection for Netcast services.
Also used for photo and music files on local
network.
2
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesn’t
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
3
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
1/8” (0.32 cm) headphone jack for analog PC
audio input.
4
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
This port is used for service or Hotel mode.
5
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesn’t work.
6
AV (Audio/Video) IN
Analog composite connection. Supports standard definition video only (480i).
7
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
8
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
9
WIRELESS CONTROL
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
10
USB INPUT
Used for viewing photos, movies and listening to MP3s.
11
HEADPHONE INPUT
0.32 cm (1/8 inch) headphone jack
Impedance 16 Ω , Maximum audio out 15 mW
12
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.
PREPARATION
1
15
PREPARATION
STAND INSTRUCTIONS (For 32/42/47/55LD650)
PREPARATION
ꔛ
Image shown may differ from your TV.
DETACHMENT
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
AC IN
AC IN
CABLE MANAGEMENT
CABLE MANAGEMENT
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
2
Remove the screws that hold the stand on.
AC IN
STAND BODY
CABLE MANAGEMENT
M4 x 20
STAND BASE
3
Detach the stand from TV.
AC IN
3
Assemble the TV as shown.
CABLE MANAGEMENT
AC IN
CABLE MANAGEMENT
PROTECTION COVER
4
Fix the 4 screws securely using the holes in
the back of the TV.
AC IN
CABLE MANAGEMENT
M4 x 20
! NOTE
16
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
(For 50/60PK950R)
Image shown may differ from your TV.
INSTALLATION
1
(For 50PK950R)
DETACHMENT
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
1
PREPARATION
ꔛ
AC IN
CABLE MANAGEMENT
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
2
Remove the screws that hold the stand on.
STAND BODY
M4 x 28
M4 x 14
3
STAND BASE
Assemble the parts of the CABLE
MANAGEMENT CLIP with the STAND
BODY.
M4 x 30
50PK950R
3
60PK950R
Detach the stand from TV.
AC IN
CABLE MANAGEMENT
CABLE
MANAGEMENT
CLIP
4
STAND BODY
Assemble the TV as shown.
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
5
Fix the 4 screws securely using the holes
in the back of the TV.
M4 x 28
17
PREPARATION
PREPARATION
(For 32/42/47/55LE5500, 42LE5550, 32/42/47/55LE7500, 42/47LE8500, 42/47LX6500)
ꔛ
Image shown may differ from your TV.
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
M4 x 20
STAND BODY
M4 x 24
M4 x 16
(42/47LE8500) (Other models)
3
Assemble the TV as shown.
4
Assemble the part of the STAND
REAR COVER with the TV.
5
(55LE5500,
55LE7500)
STAND REAR
COVER
Fix the 4 screws securely using the holes in
the back of the TV.
! NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
M4 x 16
(Other models)
M4 x 20
(42/47LE8500)
18
STAND BASE
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the STAND REAR COVER from TV.
4
Detach the stand from TV.
PREPARATION
DETACHMENT
19
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
Model
A
B
Standar
Screw
Quantity
Wall Mounting Bracket
(sold separately)
32LD650,
32LE5500,
32LE7500
200 * 100
M4
4
LSW100B, LSW100BG
42/47LD650,
42/47LE5500,
42LE5550,
42/47LX6500,
42/47LE7500,
42/47LE8500
200 * 200
M6
4
LSW200B, LSW200BG
55LD650,
55LE7500,
55LE5500
400 * 400
M6
4
LSW400B, LSW400BG,
DSW400BG
50PK950R
400 * 400
M6
4
PSW400B , PSW400BG
60PK950R
600 * 400
M8
4
PSW600B, PSW600BG
! NOTE
► Screw length needed depends on the wall
mount used. For further information, refer to
the instructions included with the mount.
► Standard dimensions for wall mount kits are
shown in the table.
► When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
► Do not use screws longer than the standard
dimension, as they may cause damage to the
inside to the TV.
► For wall mounts that do not comply with the
VESA standard screw specifications, the length
of the screws may differ depending on their
specifications.
► Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
► LG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
CAUTION
► Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
20
CABLE MANAGEMENT
PREPARATION
ꔛ
Image shown may differ from your TV.
32/42/47/55LD650
1
2
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
AC IN
Open the CABLE MANAGEMENT CLIP as
shown.
AC IN
CABLE MANAGEMENT CLIP
3
Put the cables inside the CABLE
MANAGEMENT CLIP and snap it closed.
AC IN
21
PREPARATION
32/42/47/55LE5500, 42LE5550, 32/42/47/55LE7500, 42/47LE8500, 42/47LX6500
PREPARATION
1
Secure the power cord with the CABLE
HOLDER on the TV back cover.
It will help prevent the power cable from
being removed by accident.
CABLE HOLDER
2
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
Plasma TV
1
CABLE HOLDER
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
CABLE HOLDER
(For 50/60PK950R)
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
HOW TO REMOVE THE CABLE
MANAGEMENT CLIP
► Hold the CABLE MANAGEMENT CLIP with
both hands and pull it backward as shown.
2
22
Install the CABLE MANAGEMENT CLIP
into the TV until clicking sound.
DESKTOP PEDESTAL INSTALLATION
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches
PREPARATION
ꔛ
4 inches
4 inches
4 inches
CAUTION
► Ensure adequate ventilation by following the clearance recommendations.
► Do not mount near or above any type of heat source.
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees
to suit your viewing position.
23
PREPARATION
ATTACHING THE TV TO A DESK
PREPARATION
(For 32/42LD650, 32LE5500, 32LE7500)
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
Stand
1-Screw
(provided as parts of the product)
Desk
WARNING
► To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
KENSINGTON SECURITY SYSTEM
ꔛ
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
24
ꔛ
ꔛ
ꔛ
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
ꔛ
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
! NOTE
► Use a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
► To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
25
H/P
PREPARATION
ꔛ
ꔛ
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
Image shown may differ from your TV.
H/P
PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
R
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA/
CABLE IN
or
RF Coaxial Wire (75 Ω)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
Be careful not to bend the copper wire
when connecting the antenna.
R
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
or
RF Coaxial Wire (75 Ω)
ꔛ
ꔛ
ꔛ
26
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
EXTERNAL EQUIPMENT SETUP
ꔛ
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
ꔛ
Image shown may differ from your TV.
HD RECEIVER SETUP
Component Connection
Y
PB
PR
L
R
1. How to connect
1
2
Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT IN
VIDEO 1, 2, or 3* jacks on the TV. Match the
jack colors (Y = green, PB = blue, and PR = red).
1
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO 1, 2, or 3*
jacks on the TV.
(CONTROL&SERVICE)
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
VIDEO L(MONO) AUDIO R
2
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
COMPONENT IN
1
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box operation.)
AV IN 1
ꔛ
RS-232C IN
RGB IN (PC)
/DVI IN
2. How to use
ꔛ
2
EXTERNAL EQUIPMENT SETUP
This TV can receive digital over-the-air/digital cable signals with an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
Select the Component1, Component2, or
Component3* input source on the TV using the
INPUT button on the remote control.
* Component3: For LED LCD TV
Y, CB/PB, CR/PR
Resolution
720x480i
720x480p
720x576i
720x576p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
15.73
59.94
15.75
60.00
31.47
59.94
31.50
60.00
15.625
50.00
31.25
50.00
44.96
59.94
37.50
50.00
45.00
60.00
33.72
59.94
28.125
50.00
33.75
60.00
56.25
50.00
67.432
59.94
67.50
60.00
27
EXTERNAL EQUIPMENT SETUP
AV IN2
VIDEO / AUDIO
1
IN 4
H/P
COMPONENT IN3
AUDIO / Y PB PR
EXTERNAL EQUIPMENT SETUP
USB IN 1
USB IN 2
For LED LCD TV
2
R
L
PR
PB
Y
DVI to HDMI Connection
1. How to connect
1
Connect the DVI output of the digital set-top
box to the HDMI/DVI IN 1, 2, or 3* jack on the
TV.
3
2
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
ꔛ
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
VIDEO
1
Select the HDMI1, HDMI2, or HDMI3* input source
on the TV using the INPUT button on the remote
control.
* HDMI3: For 32/42/47/55LE5500, 42LE5550,
32/42/47/55LE7500, 50/60PK950R,
42/47LE8500, 42/47LX6500
► A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio
connection is necessary.
28
PB
PR
L
R
1
ꔛ
! NOTE
2
Y
2. How to use
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
DVI OUTPUT
L
R
AUDIO
AUDIO
AV IN 1 COMPONENT IN
2
(CONTROL&SERVICE)
/DVI IN
LAN
(RGB/DVI) OPTICAL DIGITAL
Connect the digital set-top box audio output to
the AUDIO IN (RGB/DVI) jack on the TV.
RS-232C IN
RGB IN (PC)
HDMI Connection
1. How to connect
Connect the digital set-top box to HDMI/DVI IN
1, 2, 3 or 4* jack on the TV.
RGB IN (PC)
RS-232
(CONTROL&S
/DVI IN
LAN
2
3
No separate audio connection is necessary.
HDMI supports both audio and video.
1
WIRELESS
CONTROL
2. How to use
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
2
Y
VIDEO
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
ꔛ Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
* HDMI4: For 32/42/47/55LE5500, 42LE5550,
32/42/47/55LE7500, 50/60PK950R,
42/47LE8500, 42/47LX6500
► If an HDMI cable doesn’t support High
Speed HDMI, it can cause flickers or
no screen display. In this case use the
latest cables that support High Speed
HDMI.
► HDMI Audio Supported Format: Dolby
Digital, PCM
PB
PR
L
1
ꔛ
! NOTE
VIDEO L(MONO
1
A
EXTERNAL EQUIPMENT SETUP
1
HDMI OUTPUT
HDMI-DTV
Resolution
720x480p
720x576p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.47
59.94
31.50
60.00
31.25
50.00
44.96
59.94
37.5
50.00
45.00
60.00
33.72
59.94
28.125
50.00
33.75
60.00
27.00
24.00
33.75
30.00
56.25
50.00
67.432
59.94
67.50
60.00
29
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Component Connection
Y
1
Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT IN VIDEO 1, 2, or 3*
jacks on the TV.
Match the jack colors (Y = green, PB = blue, and
PR = red).
2
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO 1, 2, or 3* jacks on the
TV.
PB
PR
L
2
1
ꔛ
(CONTROL&SERVICE)
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
Turn on the DVD player, insert a DVD.
Select the Component1, Component2, or
Component3* input source on the TV using the
INPUT button on the remote control.
Refer to the DVD player’s manual for operating
instructions.
1
S
L
VIDEO L(MONO) AUDIO R
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
COMPONENT IN
ꔛ
RS-232C IN
RGB IN (PC)
/DVI IN
2. How to use
ꔛ
R
AV IN 1
EXTERNAL EQUIPMENT SETUP
1. How to connect
* Component3: For LED LCD TV
Component Input ports
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
1
IN 4
AV IN2
VIDEO / AUDIO
PR
USB IN 2
PB
H/P
Video output ports
on DVD player
Y
USB IN 1
Component ports on the
TV
For LED LCD TV
COMPONENT IN3
AUDIO / Y PB PR
To get better picture quality, connect a DVD player to
the component input ports as shown below.
2
R
30
L
PR
PB
Y
Composite (RCA) Connection
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
/DVI IN
Connect the AUDIO/VIDEO jacks between TV
and DVD. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
VIDEO
L
R
AUDIO
AV IN2
VIDEO / AUDIO
USB IN 1
USB IN 2
For LED LCD TV
COMPONENT IN3
AUDIO / Y PB PR
ꔛ
Turn on the DVD player, insert a DVD.
Select the AV1 or AV2 input source on the TV
using the INPUT button on the remote control.
Refer to the DVD player's manual for operating
instructions.
H/P
ꔛ
IN 4
ꔛ
COMPONENT IN
1
S
L
2. How to use
VIDEO L(MONO) AUDIO R
AUDIO OUT
AV IN 1
1
EXTERNAL EQUIPMENT SETUP
1. How to connect
VIDEO
L
R
AUDIO
31
EXTERNAL EQUIPMENT SETUP
HDMI Connection
1
2
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, 2, 3 or 4* jack on the TV.
No separate audio connection is necessary.
HDMI supports both audio and video.
RS-232C IN
(CONTROL&SERVICE)
LAN
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
2
Y
PB
PR
L
R
1
2. How to use
ꔛ
ꔛ
Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
Refer to the DVD player's manual for operating
instructions.
* HDMI4: For 32/42/47/55LE5500, 42LE5550,
32/42/47/55LE7500, 50/60PK950R,
42/47LE8500, 42/47LX6500
! NOTE
► If an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
use the latest cables that support High Speed HDMI.
► HDMI Audio Supported Format: Dolby Digital, PCM
32
RGB IN (PC)
/DVI IN
VIDEO
1
HDMI OUTPUT
AUDIO
AV IN 1 COMPONENT IN
EXTERNAL EQUIPMENT SETUP
1. How to connect
VCR SETUP
Antenna Connection
1
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
2
Connect the antenna cable to the RF
antenna in socket of the VCR.
ANTENNA
/CABLE IN
1
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
2. How to use
ꔛ
ꔛ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel number.
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
2
Wall Jack
L
AUDIO
R
EXTERNAL EQUIPMENT SETUP
1. How to connect
Antenna
33
EXTERNAL EQUIPMENT SETUP
Composite (RCA) Connection
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
(RGB/DVI) OPTICAL DIGITAL
AUDIO IN
ꔛ
1
SS
OL
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select the AV1 input source on the TV using the
INPUT button on the remote control.
If connected to AV IN 2, select AV2 input source on
the TV.
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
COMPONENT IN
2. How to use
ꔛ
(CONTROL&SERVICE)
3
2
ꔛ
RS-232C IN
RGB IN (PC)
/DVI IN
1
! NOTE
►If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the TV.
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
L
R
AUDIO
IN 4
ANT IN
ANT OUT
34
S-VIDEO VIDEO
OUTPUT
SWITCH
L
R
AUDIO
AV IN2
VIDEO / AUDIO
H/P
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
For LED LCD TV
ANT IN
USB IN 2
1
AV IN 1
EXTERNAL EQUIPMENT SETUP
1. How to connect
OTHER A/V SOURCE SETUP
1. How to connect
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔛ
ꔛ
COMPONENT IN
1
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
Select the AV1 input source on the TV
using the INPUT button on the remote
control.
If connected to AV IN 2 input, select the
AV2 input source on the TV.
Operate the corresponding external
equipment.
VIDEO
L
AV IN 1
ꔛ
(CONTROL&SERVICE)
/DVI IN
SS
OL
2. How to use
RS-232C IN
RGB IN (PC)
Connect the AUDIO/VIDEO jacks
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
EXTERNAL EQUIPMENT SETUP
1
R
AUDIO
Video Game Set
Camcorder
35
EXTERNAL EQUIPMENT SETUP
ꔛ
After connecting the USB IN jack, you
Memory Key
H/P
use the USB function. (►p.91)
or
AV IN2
VIDEO / AUDIO
2. How to use
USB IN 1
Connect the USB device to the USB
IN 1 or 2 jack on the side of TV.
COMPONENT IN3
AUDIO / Y PB PR
1
IN 4
EXTERNAL EQUIPMENT SETUP
1. How to connect
USB IN 2
USB CONNECTION
HEADPHONE SETUP (EXCEPT 50/60PK950R)
You can listen to the sound through the headphone.
1. How to connect
Plug the headphone into the headphone socket.
2
To adjust the headphone volume,
press the VOL +/- button. If you
press the MUTE button, the sound
from the headphone is switched off.
H/P
1
! NOTE
►AUDIO menu options are disabled when connecting a
headphone.
►When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
►Optical Digital Audio Out is not available when connecting a headphone.
36
AUDIO OUT CONNECTION
Send the TV’s audio to external audio equipment via the Audio Output port.
)
(
)
/DVI IN
3
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
2
AUDIO IN
1
ESS
ROL
2
Connect the other end of the optical cable to
the digital audio input on the audio equipment.
3
Set the “TV Speaker option - Off” in the
AUDIO menu. (►p.146). See the external audio
equipment instruction manual for operation.
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
1
Y
PB
PR
L
R
1
VIDEO
2
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
1
EXTERNAL EQUIPMENT SETUP
(
1. How to connect
! NOTE
► When connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
off in the menu. (►p.146)
CAUTION
► Do not look into the optical output port. Looking at
the laser beam may damage your vision.
► Audio with ACP (Audio Copy Protection) function may
block digital audio output.
37
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT WIRELESS CONNECTION
(OPTIONAL EXTRA)
EXTERNAL EQUIPMENT SETUP
LG TVs with a Wireless Control port support the LG Wireless Media Box), which is sold separately.
When you connect the wireless ready dongle (included with the media box) to the TV, external devices
can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
WIRELESS
CONTROL
OUT
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI)
2
1. How to connect
1
Connect the WIRELESS CONTROL jack of the Wireless Dongle to the WIRELESS
CONTROL jack on the TV.
2
Connect HDMI OUT jack of the Wireless Dongle to the HDMI IN jack on the TV.
2. How to use
ꔛ
ꔛ
Select the desired input source on the TV using the INPUT button on the remote control.
Refer to the Wireless Media Box manual for operating instructions.
! NOTE
►When using the external device connected to the Wireless Media Box, some functions of the TV
menu many not work.
38
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
1. How to connect
1
Connect the VGA output of the PC to the
RGB IN (PC) jack on the TV.
RGB IN (PC)
LAN
1
WIRELESS
CONTROL
ꔛ
ꔛ
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
VIDEO L(MONO) AUDIO R
2
Connect PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
3
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
2
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
EXTERNAL EQUIPMENT SETUP
VGA (D-Sub 15 Pin) Connection
Turn on the PC and the TV.
Select the RGB-PC input source on the TV using
the INPUT button on the remote control.
2
1
AUDIO
RGB OUTPUT
39
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection
EXTERNAL EQUIPMENT SETUP
1. How to connect
RGB IN (PC)
1
Connect the DVI output of the PC to the HDMI/
DVI IN 1, 2, or 3* jack on the TV.
/DVI IN
LAN
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
1
WIRELESS
CONTROL
VIDEO L(MONO) A
2
Y
PB
PR
L
1
VIDEO
2. How to use
ꔛ
ꔛ
Turn on the PC and the TV.
Select the HDMI1, HDMI2, or HDMI3* input source
on the TV using the INPUT button on the remote
control.
1
2
DVI OUTPUT
AUDIO
* HDMI3: For 32/42/47/55LE5500, 42LE5550,
32/42/47/55LE7500, 50/60PK950R,
42/47LE8500, 42/47LX6500
40
RS-232C I
(CONTROL&SERV
AUD
! NOTE
EXTERNAL EQUIPMENT SETUP
►To get the the best picture quality, adjust the PC graphics card to 1920x1080.
►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
►In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
►Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
►The synchronization input form for Horizontal and Vertical frequencies is separate.
►Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
►When selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.
Supported Display Specifications (RGB-PC, HDMI-PC)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
(RGB-PC)
31.468
70.09
720x400
(RGB-PC)
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.317
1024x768
48.363
60.004
1280x768
47.776
59.87
1360x768
47.72
59.799
1280x1024
(RGB-PC)
63.668
59.895
1280x1024
(HDMI-PC)
63.595
60.00
1920x1080
(RGB-PC)
66.587
59.934
1920x1080
(HDMI-PC)
66.647
59.988
41
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Selecting Resolution
EXTERNAL EQUIPMENT SETUP
You can choose the resolution in RGB-PC mode.
The Position, Phase, and Size can also be adjusted.
You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
PICTURE
ꔂ Move
SCREEN
ꔉ Enter
Resolution
• Colo
C l r
60
• Tint
0
R
G
• Color Temp.
0
W
C
Auto Config.
• Advanced Control
ꔂ Move
ꕉ Prev.
ꔑ 1024 x 768
□ 1280 x 768
□ 1360 x 768
Position
• Picture Reset
Size
• TruMotion
ꔀ
ꔉ
• Screen (RGB-PC)
Phase
• LED Local Dimming : On
Reset
1
2
3
MENU
4
ENTER
ENTER
Select Resolution.
ENTER
Select the desired resolution.
Select PICTURE.
Select Screen (RGB-PC).
5
ENTER
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
PICTURE
ꔂ Move
SCREEN
ꔉ Enter
• Colo
C l r
60
• Tint
0
R
G
• Color Temp.
0
W
C
Auto Config.
Position
• Picture Reset
• Screen (RGB-PC)
ꕉ Prev.
Resolution
• Advanced Control
• TruMotion
ꔂ Move
Size
ꔀ
ꔉ
Auto Config.
Yes
No
Phase
• LED Local Dimming : On
Reset
1
2
3
4
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Auto Config..
5
ꔛ
ꔛ
42
ENTER
ENTER
Select Yes.
Start Auto Configuration.
If the position of the image is still not
correct, try Auto adjustment again.
If picture needs to be adjusted again
after Auto adjustment in RGB-PC, you
can adjust the Position, Size or Phase.
Adjustment for screen Position, Size, and Phase
Resolution
• Colo
C l r
60
• Tint
0
R
G
• Color Temp.
0
W
C
▲
Auto Config.
• Advanced Control
Position
• Picture Reset
◀
▶
Size
• TruMotion
▼
ꔀ
ꔉ
• Screen (RGB-PC)
Phase
• LED Local Dimming : On
Reset
1
2
MENU
ENTER
Select PICTURE.
ꔛ
Select Screen (RGB-PC).
ꔛ
3
4
5
ENTER
Select Position, Size, or Phase.
ENTER
Make appropriate adjustments.
ꔛ
ENTER
Position: This function is to adjust
picture to left/right and up/down as
you prefer.
Size: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase: This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.
This feature operates only in RGB-PC mode.
SCREEN
ꔂ Move ꕉ Prev.
PICTURE
ꔂ Move ꔉ Enter
Screen Reset (Reset to original initial values)
Returns Position, Size, and Phase to the default initial settings.
This feature operates only in RGB-PC mode.
PICTURE
ꔂ Move
• Colo
C l r
60
• Tint
• Color Temp.
ꔉ Enter
SCREEN
ꔂ Move
ꕉ Prev.
Resolution
0
R
G
0
W
C
Auto Config.
• Picture Reset
• TruMotion
• Screen (RGB-PC)
To Set
Position
• Advanced Control
Yes
Size
ꔀ
ꔉ
No
Phase
• LED Local Dimming : On
Reset
1
2
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
3
4
5
ENTER
Select Reset.
ENTER
Select Yes.
ENTER
Start Reset.
43
EXTERNAL EQUIPMENT SETUP
NETWORK SETUP
Wired Network Connection
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
1
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
EXTERNAL EQUIPMENT SETUP
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network communication.
Broadband modem
Broadband Service
Router
Broadband modem
Broadband Service
1. How to connect
1
Connect the LAN port of the Modem or Router to the LAN port on the TV.
2. How to use
ꔛ
ꔛ
Select “Network Setting” in the NETWORK menu.
After connecting the LAN port, use the NETCAST menu.
CAUTION
► Do not connect a modular phone cable to the LAN port.
► Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.
44
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
ꔂ Move
If you already set the
Network Setting
ꔉ Enter
Previous setting value exists. Do
you want to connect with the
previous setting?
Network Type
• Network Setting
: Wired
• Network Status
: Internet is connected
Wired network is recommended
• Legal Notice
Wired
Enter
Wireless
Resetting
ꔉ Next
Appeared when wired and
wireless are simultaneously
connected.
IP Auto Setting
Network Setting
ꕯ Exit
IP Manual Setting
Network Setting
Network Setting
Select the IP setting mode.
TV
IP Mode
Network connecting
Setting
Test
255 . 255 . 0 . 0
ꔈSubnet Mask
255 . 255 . 0 . 0
ꔈSubnet Mask
255 . 255 . 0 . 0
ꔈGateway
255 . 255 . 0 . 0
ꔈGateway
255 . 255 . 0 . 0
ꔈDNS Server
255 . 255 . 0 . 0
ꔈDNS Server
Enter
ꔛ
ENTER
Select Network Setting.
ENTER
Select Wired.
ꔛ
3
ꔛ
ENTER
If you already set Network Setting:
Select Resetting. The new connection
settings resets the current network
settings.
ENTER
Select IP Auto Setting or IP Manual
Setting.
4
5
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
6
ENTER
Select Enter.
ꔛ
ꔛ
255 . 255 . 0 . 0
Enter
ꕯ Exit
ꔛ
2
◀ IP Manual Setting ▶
ꔈIP Address
Select NETWORK.
MENU
IP Mode
255 . 255 . 0 . 0
ꕉ Previous
1
Insert the IP address.
◀ IP Auto Setting ▶
ꔈIP Address
Close
EXTERNAL EQUIPMENT SETUP
NETWORK
ꕉ Previous
ꕯ Exit
This feature requires an always-on
broadband internet connection.
You do not need to connect to a PC
to use this function.
If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
If the Network Setting is not completed, network may not operate normally.
IP Auto Setting: Select it if there is a
DHCP server on the local area network (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you’re using a broadband router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server function. The IP address will automatically be determined.
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manually.
45
EXTERNAL EQUIPMENT SETUP
! NOTE
EXTERNAL EQUIPMENT SETUP
46
► Use a standard LAN cable with this TV. Cat5
or better with a RJ45 connector.
► Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the player to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
► Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact
your ISP.
► LG is not responsible for any malfunction of
the TV and/or the internet connection feature
due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
► LG is not responsible for problems within your
internet connection.
► Some content available through the network
connection may not be compatible with the
TV. If you have questions about such content,
please contact the producer of the content.
► You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
► Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
► Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
► A 10 Base-T or 100 Base-TX LAN port is
required for connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV.
► A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the internet connection feature contained in this TV or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits subscription to one device, this TV may
not be allowed to connect when a PC is
already connected.)
► The use of a “Router” may not be allowed or
its usage may be limited depending on the
policies and restrictions of your ISP. For details,
contact your ISP directly.
► The wireless network operates at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone, Bluetooth® devices, microwave oven,
and can be affected by interference from
them. It can be interrupted by the device
using 5Ghz radio frequencies. It is same
device with LG wireless media box, cordless
telephone, other Wi-Fi device.
► It may decrease the service speed using
Wireless network by surrounding wireless condition.
► Turn off all unused network equipment in your
local home network. Some devices may generate network traffic.
► In some instances, placing the access point or
wireless router higher up away from the floor
may improve the reception.
► The reception quality over wireless depends
on many factors such as type of the access
point, distance between the TV and access
point, and the location of the TV.
► When connecting internet through the wired/
wireless sharing machine, it may interrupt the
connection because of the use limitation and
confirmation of service company.
► To connect wireless AP, an AP that supports
the wireless connection is necessary, and the
wireless connection function of the AP needs
to be activated. Please enquire to the AP supplier for the possibility of AP wireless connections.
► Please verify the security settings of AP SSID
for wireless AP connection, and enquire to the
AP supplier for the AP SSID security settings.
► The TV can become slower or malfunction
with wrong settings of network equipments
(wired/wireless router, hub, etc). Please install
correctly by referring to the manual of the
equipment, and set the network.
Wireless Network
USB IN 2
USB IN 1
IN 4
VIDEO L(MONO) AUDIO R H/P
EXTERNAL EQUIPMENT SETUP
The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect
to a wireless lan network.
The network configuration and connection method may vary depending on the equipment in use and
the network environment. Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
AV IN 2
1. How to connect
1
Connect the “LG Wireless LAN for Broadband/DLNA Adaptor (sold separately)” to the USB
IN 1 or 2 port on the TV.
2. How to use
ꔛ
ꔛ
Select “Network Setting” in the NETWORK menu.
After connecting, you can use the NETCAST menu.
! NOTE
►For enjoying pictures, music, or video stored in the PC using the router, the use of wired port in
the router is recommended.
►When the wireless port of the router is used, there may be restrictions for some functions.
47
EXTERNAL EQUIPMENT SETUP
Wireless Network Setup
EXTERNAL EQUIPMENT SETUP
Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the
network.
If you already set the
Network Setting
NETWORK
Selecting the wireless network setting type
ꔂ Move ꔉ Enter
• Network Setting
: Wired
• Network Status
: Internet is connected
Previous setting value exists. Do
you want to connect with the
previous setting?
Network Type
Wired network is recommended
• Legal Notice
Wired
Enter
Wireless
Resetting
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꔉ Next
ꔉ Next
ꕯ Exit
ꕉ Previous
ꕯ Exit
Appeared when wired and wireless
are simultaneously connected.
If your AP is locked
Network Setting
IP Mode
◀ IP Auto Setting ▶
ꔈIP Address
255 . 255 . 0 . 0
ꔈSubnet Mask
255 . 255 . 0 . 0
ꔈGateway
255 . 255 . 0 . 0
ꔈDNS Server
255 . 255 . 0 . 0
1
2
Select AP you want to connect.
Page 1/1
Insert the security key of AP.
Insert hexadecimal (0~9,A~F) 10 or 26 digits. Insert 5 or 13 ASCII characters.
◀
IPTIME
▶
iptime
ASW
Network1
Enter
ꕯ Exit
Cancel
ꔉ Next
ꕉ Prev.
MENU
Select NETWORK.
ENTER
Select Network Setting.
ꕉ Previous
ꕯ Exit
6
ENTER
ENTER
Select an AP (Access Point) or
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
ENTER
Input the security key of AP.
7
Select Wireless.
8
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
4
ENTER
If you already set Network
Setting: Select Resetting.
The new connection settings
resets the current network settings.
5
ENTER
Select Setting from the AP list.
7PQRS 8 TUV 9 WXYZ
0
9
ꕯ Exit
Scan the all available AP (Access
Point) or wireless routers within range
and display them as a list.
3
ENTER
Access Point
Search
ꔅ Connecting with PIN mode
Enter
ꕉ Previous
Selecting AP
Inserting the security key
Select the IP setting mode.
48
Select the wireless network setting type.
Repeat step 4-5 on P.45
When a security code is already set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Connecting with PIN mode
Select AP you want to connect.
Insert PIN number at the AP webpage and
press ‘Connect’ button.
Page 1/1
IPTIME
PIN NUBMER : 12345670
iptime
Connect
ASW
Access Point
Search
Network1
For more information, check the AP manual.
ꔉ Next
ꔅ Connecting with PIN mode
ꕉ Previous
ꔉ Next
ꕉ Previous
1
2
3
ꕯ Exit
Repeat step 1-6 on P.48.
RED
ꕯ Exit
4
Connect the acccess point with PIN
mode.
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
5
ꔛ
Select Connect.
ENTER
EXTERNAL EQUIPMENT SETUP
Selecting AP
Repeat step 4-5 on P.45.
PIN number is the unique 8 digit number
of the dongle.
Simple setting (WPS-button mode)
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Select the wireless network setting type.
Select the wireless network setting type.
Simple setting (WPS-button mode)
Press PBC Mode button of AP and press ‘Connect’ button.
Setting from the AP list
Connect
Simple setting (WPS-button mode)
Caution: Check if PBC mode button is available for your AP.
Setting Ad-hoc network
ꔉ Next
ꔉ Next
ꕉ Previous
1
ꕯ Exit
Repeat step 1-4 on P.48.
2
ENTER
Select Simple setting (WPSbutton mode).
ꕉ Previous
ꕯ Exit
3
4
ENTER
Select Connect.
Repeat step 4-5 on P.45.
49
EXTERNAL EQUIPMENT SETUP
AD-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two PCs with a cross cable.
EXTERNAL EQUIPMENT SETUP
Selecting the wireless network setting type
Setting Ad-hoc network
Setting Ad-hoc network
Select the wireless network setting type.
Insert the setting information into the device.
Features using exiting network can be unavailable. Do you
Setting from the AP list
Network ID(SSID) : LGTV10
want to change network connection?
Security Key : 1111111111
Simple setting (WPS-button mode)
Enter
Setting Ad-hoc network
Cancel
ꕉ Previous
ꔅ Changing the setting information.
ꔉ Next
ꔉ Next
ꕉ Previous
ꕯ Exit
Connect
ꕯ Exit
ꕉ Previous
Insert the setting information into the device.
Insert the IP address.
Wireless network is connected.
(LGTV10)
TV
IP Mode
Signal power
Gateway
Setting
Mac Address
IP Address
Subnet Mask
Gateway
Test
: 00:00:13:64:23:01
: 10.19.152.115
: 255.255.254.0
: 10.19.152.1
192 . 168 . 0 . 10
ꔈSubnet Mask
255 . 255 . 255 . 0
ꔈGateway
ꔈDNS Server
Network ID(SSID) : LGTV10
IP Manual Setting
ꔈIP Address
Security Key : 1111111111
Connecting the Ad-hoc network
192 . 168 . 0 . 1
255 . 255 . 0 . 0
Cancel
Enter
Close
ꕉ Previous
1
2
Repeat step 1-3 on P.48.
ENTER
Select Setting AD-hoc network.
3
ENTER
4
ENTER
ENTER
Select Enter.
Select Connect to connect Ad-hoc
network.
You can see the Network ID and
Security Key on your TV screen.
Enter this Network ID and Security
Key to your device.
If a network may not operate,
change the setting information
using the RED button.
5
6
Example of the PC setting that
supports a wireless network
1. Find a wireless network device in
your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
ꔛ
ꕯ Exit
ꔛ
PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
ꔛ
TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
50
ꕯ Exit
Setting Ad-hoc network
Network Setting
Network Setting
ꔉ Next
ENTER
Insert the IP address.
ENTER
Network setting is completed.
Select Close.
Network Status
NETWORK
ꔂ Move
Network Setting
ꔉ Enter
: Wired
• Network Status
: Internet is connected
Network connecting
• Legal Notice
Setting
Test
Close
Select the wireless network setting type.
Network Setting
Select the wireless network setting type.
Select the IP setting mode.
IP Mode
◀ IP Auto Setting ▶
ꔈIP Address
255 . 255 . 0 . 0
ꔈSubnet Mask
255 . 255 . 0 . 0
ꔈGateway
255 . 255 . 0 . 0
ꔈDNS Server
255 . 255 . 0 . 0
Setting Ad-hoc network
ꔉ Next
ꕉ Previous
ꕯ Exit
Wireless Connection
Enter
ꕉ Previous
Setting from the AP list
Simple setting (WPS-button mode)
EXTERNAL EQUIPMENT SETUP
TV
• Network Setting
ꕯ Exit
Wired Connection
1
MENU
Select NETWORK.
ENTER
Select Network Status.
2
ꔛ
ꔛ
ꔛ
3
ENTER
Setting: Return to the network setting menu or wireless network setting
type menu.
Test: Test the current network status
after setting the network.
Close: Return to the previous menu.
Check the newtwork status.
51
WATCHING
/ CHANNEL
CONTROL
WATCHING
TVTV
/ CHANNEL
CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER
ENERGY SAVING
WATCHING TV / CHANNEL CONTROL
AV MODE
Turns the TV on from standby or off to standby.
Adjusts the Energy Saving setting.
►p.130
TV
TV/RAD
LIGHT
(FOR PLASMA TV)
SAVING
Rotates through inputs.
Also switches the TV on from standby.
►p.71
LIGHT
Returns to the last TV channel.
Selects Radio, TV, CATV and DTV channel.
Q.VIEW
VOLUME
UP/DOWN
FAV
MARK
RATIO
DELETE
MUTE
TV
SAVING
Displays the channel table.
1
►p.70
2 ABC 3 DEF
Tunes to the last channel viewed.
4 GHI 5 JKL 6 MNO
Adjusts the volume.
7PQRS 8 TUV 9 WXYZ
Set up desired favorite channels list
►p.69
Select the input to apply the Picture Wizard settings. ►p.129
Use to mark or unmark a photo/music/movie.
►p.99, 104, 110
CHAR/NUM
ENERGY AV MODE INPUT
Illuminates the remote control buttons.
NUMBER button
LIST
TV/
RAD
Toggles through preset Video and Audio modes.
►p.74
INPUT
ENERGY AV MODE INPUT
Shifts the Character or Number for internet service.
Changes the aspect ratio.
LIST
0
Q.VIEW
Q.VIEW
MARK
FAV
VOL
CHAR/NUM
RATIO
DELETE
CH
MUTE
MENU
Q.MENU
Deletes the character or number on the screen.
Switches the sound on or off.
►p.56
CHANNEL
UP/DOWN
Changes the channel.
PAGE
UP/DOWN
Moves from one full set of screen information to
the next one.
ENTER
BACK
EXIT
FREEZE
52
P
A
G
E
MENU
NETCAST
Select the desired NETCAST menu source.
Opens the list of Quick Menu options.
Navigates the on-screen menus and adjusts the
system settings to your preference.
BACK
Allows the user to move return one step in an
interactive application or other user interaction
function.
SIMPLINK
GUIDE
COLOR
BUTTON
USB, SMPLINK
Control buttons
SUBTITLE
Q.MENU
►p.61
THUMBSTICK
(Up/Down/Left
Right/ENTER)
EXIT
MENU
Clears all on-screen displays and return to TV
viewing.
ENTER
BACK GUIDE EXIT
SUBTITLE
INFO
See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK
menu appears at the screen. ►p.75
Show Channel schedule.
MENU
Access special functions in some menus.
•Controls MY MEDIA menu (Photo List, Music List,
Movie List)
•Controls the SIMPLINK compatible devices.
WATCHING TV / CHANNEL CONTROL
Q.MENU
Displays the main menu or clears all on-screen
displays and return to TV viewing.
Q.MENU
ENTER
BACK
EXIT
Recalls your preferred subtitle in digital mode.
FREEZE
INFO
Displays programe information at the bottom of the
screen.
FREEZE
(FOR PLASMA TV)
Pause the present picture at the screen.
(It doesn’t work at USB Mode and Simplink.)
The TV returns to normal viewing automatically if
no signal is received or no operation is performed
for 5 minutes.
If you keep the screen in Freeze condition, the
residual image can exist.
53
WATCHING TV / CHANNEL CONTROL
POWER
ENERGY SAVING
AV MODE
Turns the TV on from standby or off to standby.
Adjusts the Energy Saving setting.
►p.130
Toggles through preset Video and Audio modes.
ENERGY AV MODE INPUT
TV/
RAD
►p.74
INPUT
WATCHING TV / CHANNEL CONTROL
TV/RAD
Rotates through inputs.
Also switches the TV on from standby.
SAVING
►p.71
Selects Radio, TV, CATV and DTV channel.
NUMBER button
LIST
Q.VIEW
VOLUME
UP/DOWN
FAV
3D
CHAR/NUM
DELETE
MUTE
Displays the channel table.
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
►p.70
LIST
Tunes to the last channel viewed.
0
Q.VIEW
Q.VIEW
MARK
Adjusts the volume.
FAV
Set up desired favorite channels list
Used for viewing the 3D video.
►p.69
VOL
►p.87
CHAR/NUM
3D
DELETE
CH
MUTE
Shifts the Character or Number for internet service.
MENU
Q.MENU
Deletes the character or number on the screen.
Switches the sound on or off.
►p.56
ENTER
CHANNEL
UP/DOWN
Changes the channel.
PAGE
UP/DOWN
Moves from one full set of screen information to
the next one.
BACK GUIDE EXIT
L/R SELECT
MENU
NETCAST
Displays the main menu or clears all on-screen
displays and return to TV viewing.
SUBTITLE
INFO
Select the desired NETCAST menu source.
RATIO
Q.MENU
►p.61
THUMBSTICK
(Up/Down/Left
Right/ENTER)
Navigates the on-screen menus and adjusts the
system settings to your preference.
BACK
Allows the user to move return one step in an
interactive application or other user interaction
function.
EXIT
Clears all on-screen displays and return to TV
viewing.
GUIDE
54
Opens the list of Quick Menu options.
Show Channel schedule.
P
A
G
E
COLOR
BUTTON
USB, SMPLINK
Control buttons
SUBTITLE
RATIO
SIMPLINK
L/R SELECT
BACK GUIDE EXIT
•Controls MY MEDIA menu (Photo List, Music List,
Movie List)
•Controls the SIMPLINK compatible devices.
L/R SELECT
SUBTITLE
Recalls your preferred subtitle in digital mode.
INFO
RATIO
Displays programe information at the bottom of the
screen.
Changes the aspect ratio.
See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK menu
appears at the screen. ►p.75
Used for viewing the 3D video.
►p.89
Simple Remote Control (For 50/60PK950R)
POWER
TV/INPUT
VOLUME UP/
DOWN
MUTE
CHANNEL
UP/DOWN
Turns the TV on from standby or off to standby.
Rotates through inputs.
Also switches the TV on from standby.
POWER
VOL
CH
Adjusts the volume.
Switches the sound on or off.
Changes the channel.
NUMBER button
Q.VIEW
TV/INPUT
WATCHING TV / CHANNEL CONTROL
INFO
Access special functions in some menus.
Q.VIEW
Tunes to the last channel viewed.
Installing Batteries
ꔛ
Open the battery compartment cover on the back side and install the batteries matching
correct polarity.
ꔛ
Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones.
ꔛ
Close cover.
55
WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV
1
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
ꔛ
In standby mode to turn TV on, press the / I, INPUT, CH (ꕌ or ꕍ) button on the TV or press
the POWER, INPUT, CH (ꕌ or ꕍ), Number (0~9) button on the remote control.
WATCHING TV / CHANNEL CONTROL
2
Select the viewing source by using the INPUT button on the remote control.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts
to standby mode.
! NOTE
► If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
► If you do not complete the Initial setting, it will appear whenever the TV is switched on until the
Initial setting procedure is completed.
CHANNEL SELECTION
1
Press the CH (ꕌor ꕍ) or NUMBER buttons to select a channel number.
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
56
1
Press the VOL (+ or -) button to adjust the volume.
2
If you want to switch the sound off, press the MUTE button.
3
You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
INITIAL SETTING
This Function guides the user to easily set the essential items for viewing the TV for the first time
when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It
can also be activated from the user menus.
ꔛ
ꔛ
Step1. Selecting Language
WELCOME!
WELCOME!
Thank you for choosing LG
Thank you for choosing LG
Step3. Power Indicator (For LED
LCD TV)
Step 1. Language
Step 1. Language
or
Português
English
Step 3. Power Indicator
English
Español
Español
Standby Light
ꔉ Next
ꔉ Next
◀
ꕉ Previous
1
1
2
2
Step2. Mode setting
ꔛ
▶
ꔉ Next
Select On or Off.
Select Menu Language.
ENTER
Off
WATCHING TV / CHANNEL CONTROL
ꔛ
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
“Store Demo” Mode is only intended for use in retail environments. Customers can adjust the
“Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically
return to preset in-store mode after 5 minutes.
“Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes
the TV to set the image quality.
ENTER
This function is disable in “Step2. Mode
Setting - Store Demo”.
Step 2. Mode Setting
i Selecting the environment.
Choose the setting mode you want.
Step4. Auto Tuning
Select [Home Use] to use this TV at home. To use this TV
at store, select [Store Demo].
Home Use
Store Demo
• Demo Mode
ꕉ Previous
Before starting,
be sure that the
TV antenna is connected.
Off
ꔉ Next
ꕉ Previous
1
2
Step 4. Auto Tuning
ꔉ Next
Select Home Use.
1
ENTER
ENTER
Check your antenna connection and
start Auto Tuning.
57
WATCHING TV / CHANNEL CONTROL
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
2
MENU
Display each menu.
ENTER
Select a menu item.
WATCHING TV / CHANNEL CONTROL
CHANNEL
3
ENTER
4
Return to TV viewing.
EXIT
ꔂ Move
Accept the current selection.
PICTURE
ꔉ Enter
• Auto Tuning
• Aspect Ratio
• Manual Tuning
CHANNEL
• ꕊ Energy Saving : Off
PICTURE
• System Color
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ3
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
TIME
ꔉ Enter
ꔂ Move
ꔉ Enter
ꔂ Move
ꔉ Enter
• Clock
• Balance
• Sound Mode
ꔉ Enter
• Picture Wizard
• Channel Edit
AUDIO
AUDIO
ꔂ Move
: 16:9
0
L
R
TIME
: Standard
• Infinite Sound: Off
• Treble
50
• Bass
50
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
• Rese
Reset
Reset
LOCK
ꔂ Move
OPTION
ꔉ Enter
• Set Password
• Lock System
LOCK
• Language
: On
• Caption
• Block Channel
• power indicator
• Input Block
• Key Lock
NETWORK
NETWORK
• Initial Setting
OPTION
: Off
ꔂ Move
• Network Setting
: None
• Network Status
: Not connected
ꔉ Enter
ꔛ
: Off
• Set ID
:1
• Mode Setting
: Home Use
• IR Blaster
: Off
For further information, refer to the
optional “Wireless Media Box”
manual for operating instructions.
• Legal Notice
! NOTE
► ISM Method: For Plasma TV.
► Backlight, TruMotion, LED Local Dimming,
Power Indicator: For LED LCD TV/LCD
TV.
58
SETUP
ꔂ Move
• Auto Tuning
• Aspect Ratio
• Manual Tuning
• Picture Wizard
• Channel Edit
PICTURE
SETUP
AUDIO
AUDIO
PICTURE
ꔉ Enter
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ3
: 16:9
• ꕊ Energy Saving : Off
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
S ap
Shar
pnes
ess
700
TIME
ꔉ Enter
ꔉ Enter
ꔂ Move
ꔉ Enter
ꔂ Move
ꔉ Enter
• Clock
• Balance
• Sound Mode
ꔂ Move
0
L
R
: Standard
TIME
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
• Infinite Sound : Off
• Treble
50
• Bass
50
WATCHING TV / CHANNEL CONTROL
32/42/47/55LE5500-DA, 42LE5550-DA, 42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DA
• Rese
Reset
Reset
LOCK
ꔂ Move
OPTION
ꔉ Enter
• Set Password
• Lock System
LOCK
• Language(Language)
: On
• Subtitle
• Block Channel
• Hard of Hearing(ꔞ) : Off
• Input Block
• Key Lock
ꔛ
NETWORK
NETWORK
OPTION
: Off
ꔂ Move
• Network Setting
: None
• Network Status
: Not connected
ꔉ Enter
: Off
• Power Indicator
• Factory Reset
• Set ID
:1
• Mode Setting
: Home Use
• IR Baster
: Off
For further information, refer to the
optional “Wireless Media Box”
manual for operating instructions.
• Legal Notice
59
WATCHING TV / CHANNEL CONTROL
i.e)
Input List
ꔂ Move
Input List
ꔉ Enter
ꔂ Move
TV
USB1
USB2
AV 1
AV 2
Component1
WATCHING TV / CHANNEL CONTROL
Component2
Component3
RGB-PC
Cable
USB1
USB2
AV 1
AV 2
HDMI1
HDMI2
HDMI3
Component1
Component2
Component3
RGB-PC
HDMI1
HDMI2
ꔍ
ꔅ Input Label
ꔅ Input Label
ꕉ Exit
ꕉ Exit
BLUETOOTH
ꔂ Move
ꔉ Enter
Bluetooth on
BLUETOOTH
Bluetooth is off.
Select ‘Bluetooth On’ on the left to turn on Bluetooth.
MY MEDIA
MY MEDIA
Movie List
Photo List
Music List
GAME
JUMP
HOLE IN ONE
WHACK A MOLE
SAVING CRYSTAL
INVADER
URGENT SURVIVAL
SUDOKU
COOKING BURGER
GAME
ꕯ Exit
60
Antena
or
INPUT
ꔉ Enter
Page 1/2
Page 1/2
ꕉ Exit
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
◀
Aspect Ratio
▶
◀
▶
ꕉ Exit
ꕉ Exit
For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DD
ꔣ Aspect Ratio: Selects your desired picture format.
ꕅ Clear Voice II: By differentiating the human sound range from others, it helps users listen to human
WATCHING TV / CHANNEL CONTROL
16:9 ꔉ
16:9 ꔉ
A
Aspect Ratio
voices better.
ꕇ Picture Mode: Selects the desired preset picture setting.
ꕈ Sound Mode: Selects the desired preset sound setting.
ꔴ SAP: Selects MTS sound.
(Audio Language: For 32/42/47/55LE5500-DA, 42LE5550-DA, 42/47LE8500-DA,
32/42/47/55LD650-DA, 42/47LX6500-DD)
ꔤSleep Timer: Select the amount of time before your TV turns off automatically.
ꔳ Del/Add: Select channel you want to add or delete.
ꕄ Caption: Select on or off.
ꔢ USB Device: Select “Eject” in order to eject a USB device.
1
2
Q.MENU
Display each menu.
ENTER
Make appropriate adjustments.
3
EXIT
Return to TV viewing.
61
WATCHING TV / CHANNEL CONTROL
CUSTOMER SUPPORT
Software Update
WATCHING TV / CHANNEL CONTROL
You can update the TV with the latest software to enhance the product operation and/or add new features.
You can update the software by connecting the TV directly to the software update server.
The Software Update function may not work properly depending on your internet environment. In this
case, you can obtain the latest software from the authorized LG Electronics Service Center then update
your TV.
ꔑ Software Update
□ Picture Test
Software Update
□ Sound Test
□ Signal Test
00.00.06
□ Product/Service Info.
□ Network Test
Check Update Version
Close
Close
For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DD
1
2
3
MENU
RED
Select Customer Support.
ENTER
Select Software Update.
ENTER
Select Check Update Version to check
the newest version.
ꔛ
ꔛ
When selecting “Software Update-On”
- If the TV is connected to the internet
and it finds a software update on the
LG server, the update popup menu will
appear automatically.
- If the updated digital software information is transmitted, the update popup
menu will appear automatically.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
62
On
• Current Version
The software downloading time will
vary depending on the software size
and network conditions.
During the software update procedure, do not turn off the TV or disconnect AC power, or disconnect the
LAN cable.
After software update, you can confirm the update software version at
software Update menu.
When update is completed, the TV
will restart automatically in 5 seconds.
The TV functions may be improved
or changed by software update.
The available time or functionality of
NetCast menu may be depends on
your ISP network conditions.
When an update is completed, some
CHANNEL, PICTURE, and AUDIO
menu settings may need resetting.
This TV cannot be updated to previous software version.
Use the “Check Update Version” button to update the latest software on
the Network server manually.
When there is a new software update
when you open NetCast, you will not
be able to use NetCast without
updating the software.
You cannot open NetCast while the
software is being updated.
Picture Test / Sound Test
This function is a customer support function that can execute picture and sound tests.
□ Software Update
? Do you have a problem in this test
screen?
ꔑ Picture Test
□ Sound Test
□ Signal Test
□ Product/Service Info.
Yes
No
□ Network Test
Close
□ Picture Test
? Do you have a sound problem in this
screen?
ꔑ Sound Test
□ Signal Test
□ Product/Service Info.
Yes
□ Network Test
No
Close
For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DD
1
MENU
2
4
RED
Select Customer Support.
ENTER
Select Picture Test or Sound Test.
ENTER
Select Yes.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
3
WATCHING TV / CHANNEL CONTROL
□ Software Update
Diagnostics
(For 32/42/47/55LE5500-DA, 42LE5550-DA 42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DD)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and
Software Version.
□ Software Update
□ Picture Test
□ Sound Test
ꔑ Signal Test
□ Product/Service Info.
□ Network Test
Close
1
2
MENU
RED
Select Customer Support
menu.
Select Signal Test.
3
ENTER
Display Manufacturer, Model/Type,
Serial Number and Software
Version.
EXIT
Return to the previous menu.
4
63
WATCHING TV / CHANNEL CONTROL
Product/Service Info.
This function shows support and product information.
Customer Service Center can differ by country.
1
MENU
WATCHING TV / CHANNEL CONTROL
2
3
RED
Select Customer Support.
ENTER
Select Product/Service Info..
You can check the various
product/Service infomation
based on your model.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Network Test
Check the newtwork status.
Network Setting
□ Software Update
□ Picture Test
TV
□ Sound Test
Network connecting
□ Signal Test
□ Product/Service Info.
ꔑ Network Test
Close
Setting
For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA,
42/47LX6500-DD
1
MENU
2
3
64
ENTER
RED
Select Customer Support.
ENTER
Select Network Test.
Check the newtwork status.
Test
Close
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
1
MENU
Select Simple Manual.
Select the part of the manual you want to see.
RED
Go to the Index page.
BLUE
Play the Simple Manual automatically or manually.
EXIT
Return to TV viewing.
3
WATCHING TV / CHANNEL CONTROL
2
GREEN
65
WATCHING TV / CHANNEL CONTROL
CHANNEL SETUP
Auto Scan (Auto Tuning)
WATCHING TV / CHANNEL CONTROL
Automatically finds all channels available through antenna or cable inputs, and stores them in memory
on the channel list.
Run this function if you change your residence or move the TV.
Auto Tuning memorizes only the channels available at the time.
CHANNEL
ꔂ Move
• Auto Tuning
ꔉ Enter
ꔡ
CHANNEL
ꔂ Move
ꔉ Enter
• Auto Tuning
• Manual Tuning
• Manual Tuning
• Channel Edit
• Channel Edit
• System Color
• System Color
Antenna
Antenna
Cable
Cable
Antenna
2
MENU
Select CHANNEL or SETUP.
ENTER
Select Auto Tuning.
ENTER
Select Start.
3
4
ENTER
5
Run Auto tuning.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
Cable
Check your TV signal connection.
The previous channel information
will be updated during Auto Tuning.
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
1
66
ꔉ
Start
Start
Close
Close
or
The TV will ask for a password if
parental control has been activated
(LOCK Menu). Use the password you
set up in the LOCK Menu to allow a
channel search.
Add/Delete Channel (Manual Tuning)
ꔂ Move
ꔉ Enter
CHANNEL
ꔂ Move
ꔉ Enter
i.e)
• Auto Tuning
• Manual Tuning
• Auto Tuning
ꔉ
ꔀ
• Manual Tuning
• Channel Edit
• Channel Edit
• System Color
• System Color
◀
▶
TV
Select channel type and RF-channel
number.
2
Channel
TV 2-0
Delete
Close
1
2
MENU
Select CHANNEL or SETUP.
ENTER
Select Manual Tuning.
ENTER
Select TV, or Cable TV. (DTV : Select
DTV, TV, or Cable TV.)
3
4
ꔛ
WATCHING TV / CHANNEL CONTROL
CHANNEL
The TV will ask for a password if
parental control has been activated
(LOCK Menu). Use the password you
set up in the LOCK Menu to allow a
channel search.
Select channel you want to add or
delete.
5
ENTER
6
Select Add or Delete. (DTV : Select Add,
Update or Cancel.)
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
67
WATCHING TV / CHANNEL CONTROL
Channel Editing
The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel
Edit List are displayed in blue.
WATCHING TV / CHANNEL CONTROL
When a channel number is deleted, it means that you will be unable to select it using CH∧∨button
during TV viewing.
If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons
or select it in the Channel Edit menu.
CHANNEL
Channel Edit
ꔂ Move
Favorite Group: A
ꔉ Enter
• Auto Tuning
Cable TV
• Manual Tuning
• Channel Edit
ꔉ
ꔀ
• System Color
ꔉ CH.Change
ꘂ Favorite Ch.
ꔂ Navigation
ꘃ Page Change
꘩ Favorite Ch. Group
ꕉ Previous
ꔅ Block/Unblock
ꔅ Add/Delete
or
Channel Edit
Favorite Group: A
DTV
RADIO
ꔉ CH.Change
1
2
4
MENU
Select CHANNEL or SETUP.
ENTER
Select Channel Edit.
ENTER
Select a channel.
BLUE
YELLOW
3
ENTER
CH
ꔛ
Keep pressing the ꕌ button and use
the < or > buttons to move between
TV and Cable TV.
Page 1/1
TV
Cable TV
ꘃ Page Change
68
Page 1/1
TV
P
A
G
E
5
ꘂ Favorite Ch.
꘩ Favorite Ch. Group
ꕉ Previous
ꔅ Move
ꔅ Block/Unblock
ꔅ Add/Delete
Add or delete a channel.
Block or unblock the channel.
You can register as block/unblock channel
even though you select “Lock system-Off”
in the LOCK menu.
Switch to the chosen channel number.
Move the pages when the channel list is
too long.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
FAVORITE CHANNEL SETUP
Favorite Channels are a convenient feature that lets you quickly select channels of your choice without
waiting for the TV to select all the in-between channels.
i.e)
ꕉ Exit
Favorite List
▶
Group A
TV
3-0
TV
4-0
P
A
G
E
CH
2
MARK
FAV
ꔉ
CHAR/NUM
3
YELLOW
BLUE
ꔅ Ch.Edit
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Select your desired channel.
0
ꔡ
ꔅ Ch.Reg.
or
4
Register or cancel the current channel
in favorite channel list.
Go to the “CHANNEL or SETUP menu Channel Edit”.
Return to TV viewing.
EXIT
ꔛ
Select your desired favorite
channel group from A to D.
You can also setup Favorite List in the
CHANNEL menu - Channel Edit.
WATCHING TV / CHANNEL CONTROL
◀
1
ꔊꔋFavorite Ch. Group
FAVORITE CHANNEL LIST
Displaying the favorite channel list
i.e)
Favorite List
◀
ꕉ Exit
ꔊꔋFavorite Ch. Group
▶
Group A
TV
3-0
TV
4-0
ꔉ
ꔡ
1
MARK
FAV
Selecting a channel in the favorite
channel list
1
2
ꔅ Ch.Reg.
Display the Favorite channel list.
CHAR/NUM
Select a channel.
ENTER
Switch to the chosen channel number.
ꔅ Ch.Edit
Paging through a favorite channel
list
1
CH
2
EXIT
P
A
G
E
Turn the pages.
Return to TV viewing.
69
WATCHING TV / CHANNEL CONTROL
CHANNEL LIST
You can check which channels are stored in the memory by displaying the channel list.
i.e)
Channel List
TV
3-0
TV
4-0
ꕉ Exit
ꔒ
ꔉ
ꔡ
WATCHING TV / CHANNEL CONTROL
This padlock is displayed
when the channel is locked
with parental control.
ꔅ Ch.Edit
Displaying Channel List
1
LIST
Display the Channel List.
BLUE
Tune to the “CHANNEL or SETUP menu - Channel Edit”.
Selecting a channel in the channel list
1
2
Select a channel.
ENTER
Switch to the chosen channel number.
Paging through a channel list
1
CH
2
EXIT
70
P
A
G
E
Turn the pages.
Return to TV viewing.
INPUT LIST
Only these input signals which are connected to a TV can be activated and selected.
Input List
i.e)
ꔂ Move
ꔉ Enter
Page 1/2
TV
USB1
USB2
AV 1
AV 2
Component1
Component2
Component3
RGB-PC
HDMI1
HDMI2
HDMI3
ꔅ Input Label
or
Input List
ꔂ Move
ꔉ Enter
Page 1/2
Antena
Cable
USB1
USB2
AV 1
AV 2
Component1
Component2
Component3
RGB-PC
HDMI1
HDMI2
ꔅ Input Label
1
INPUT
Select the desired input source.
ꔛ You can also select the desired input source in the INPUT menu.
ENTER
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꕉ Exit
When new external device is connected, this popup
menu is displayed automatically.
If selecting Yes, you can select input source that you
want to appreciate.
But, when selecting “SIMPLINK - On”, popup menu for
HDMI input will not be displayed.
New external input is connected.
Do you want to use this?
WATCHING TV / CHANNEL CONTROL
Disconnected inputs are inactive
(grayed out)
ꕉ Exit
AV
Yes
No
TV: Select it to watch over-the-air and cable.
USB: Select it to use movie, photo, or music files.
AV: Select them to watch a VCR or other external equipment.
Component: Select them to watch DVD or a Digital set-top box.
RGB-PC: Select it to view PC input.
HDMI: Select them to watch high definition devices.
INPUT LABEL
This indicates which device is connected to which input port.
i.e)
Input Label
1
AV1
◀
AV2
◀
▶
Component1
◀
▶
Component2
◀
▶
Component3
◀
▶
VCR
INPUT
▶
2
Select the desired input
source.
BLUE
Select the label.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
3
ꔍ
Close
71
WATCHING TV / CHANNEL CONTROL
MODE SETTING
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
OPTION
ꔂ Move
ꔉ Enter
• Language
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
: Off
• Caption
• Power Indicator
i Selecting the environment.
Choose the setting mode you want.
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
Select [Home Use] to use this TV at home. To use
this TV in store, select [Store Demo].
• Set ID
:1
• Mode Setting
: Home Use
WATCHING TV / CHANNEL CONTROL
Home Use
Store Demo
• Demo Mode
Off
Close
1
2
ꔛ
MENU
Select OPTION.
ENTER
Select Mode Setting.
ENTER
Select Home Use.
3
4
ꔛ
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
“Store Demo” Mode is only intended
for use in retail environments.
Customers can adjust the “Picture
menu - Picture mode” manually while
inspecting the TV, but the TV will
automatically return to preset instore mode after 5 minutes.
“Store Demo” Mode is an optimal
setting for displaying at stores. “Store
Demo” mode initializes the TV to set
the image quality.
DEMO MODE
Displays a slide show to explain the various feature of this TV.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
OPTION
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
• Power Indicator
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
i Selecting the environment.
Choose the setting mode you want.
Select [Store Demo] to use this TV in store. To use
this TV at home, select [Home Use].
• Set ID
:1
• Mode Setting
: Store Demo
Home Use
Store Demo
• Demo Mode
Off
Close
1
2
MENU
Select OPTION.
4
ENTER
Select Mode Setting.
5
ENTER
EXIT
3
72
ENTER
Select Store Demo.
Select On.
Return to TV viewing.
After a while, Demo Mode. starts.
If you want to stop the demo, press
any button (Except VOL +, - and
MUTE button).
RESET TO FACTORY DEFAULT (INITIAL SETTING)
This function resets the TV to factory default and erases all stored channels.
OPTION
ꔂ Move
OPTION
ꔉ Enter
• Language
• Caption
• Caption
: Off
• Power Indicator
ꔉ
ꔀ
• Initial Setting
!
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
MENU
Select OPTION.
ꔛ
ENTER
Select Initial Setting or
Factory Reset.
ꔛ
ENTER
Select Yes.
All user settings and channel settings will
be reset. Still continue?
Yes
No
When selecting “Lock System - On”
in the LOCK menu, the message to
enter the password appears.
If you forget your password, press
“0-3-2-5” on the remote control.
3
4
ENTER
TV turns off automatically and start
factory reset.
WATCHING TV / CHANNEL CONTROL
2
ꔉ Enter
• Language
: Off
• Power Indicator
1
ꔂ Move
SYSTEM COLOR (Except 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA, 42/47LX6500-DD)
This function set color suited the each signal.
CHANNEL
ꔂ Move
CHANNEL
ꔉ Enter
• Auto Tuning
• Auto Tuning
• Manual Tuning
• Manual Tuning
• Channel Edit
• System Color
ꔠ
ꔉ
ꔂ Move
ꔉ Enter
• Channel Edit
□ Multi
• System Color
□ PAL-M
□ PAL-N
ꔑ NTSC
1
2
3
MENU
ENTER
ENTER
Select CHANNEL.
4
ꔠ
ꔉ
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Select System Color.
Select Multi, PAL-M, PAL-N,
or NTSC.
73
WATCHING TV / CHANNEL CONTROL
AV MODE
AV Mode toggles through preset Video and Audio settings.
ꔛ
WATCHING TV / CHANNEL CONTROL
Off
Cinema / ꔧ Cinema
Game
Sport
ꔛ
ꔛ
ꔛ
1
AV MODE
Press the AV MODE button repeatedly to
select the desired source.
ꔛ
ꔛ
2
ENTER
ꔛ
ꔛ
GAME
If you select “Cinema / ꔧ Cinema”
in AV mode, Cinema / ꔧ Cinema
will be selected both for “PICTURE
menu - Picture Mode” and “AUDIO
menu - Sound Mode” respectively.
If you select “Off” in AV mode, the
“Picture Mode” and “Sound Mode”
return to previous selected value.
Off: Disables the AV MODE.
Cinema / ꔧ Cinema: Optimizes
video and audio for watching movies.
Sport: Optimizes video and audio for
watching sports events.
Game: Optimizes video and audio for
playing games.
When playing a video game using
PlayStation or Xbox, it is recommended to use the Game mode.
When in Game mode, functions
related to picture quality will be optimized for playing games.
Allows you to enjoy the various games.
GAME
JUMP
HOLE IN ONE
WHACK A MOLE
SAVING CRYSTAL
INVADER
URGENT SURVIVAL
SUDOKU
COOKING BURGER
GAME
ꕉ Exit
1
2
3
MENU
Select GAME.
ENTER
Select the desired game.
ENTER
Enter the selected game mode.
4
EXIT
74
Return to TV viewing.
SIMPLINK
SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices
with the
logo are fully supported.
SIMPLINK can be turned on and off in the user menus.
1
ꔉ Enter ꕉ Exit
◀
On
◀ DISC 1
▶
◀ VCR 1
▶
HD HT
3
HDD Recorder
◀ Speaker
TV Speaker
1
2
3
4
5
Select On.
ENTER
Select the desired device.
4
Control connected AV devices.
ENTER
▶
TV viewing: Switch to the previous TV
channel regardless of the current
mode.
DISC playback: Select and play discs.
When multiple discs are available, the
device type of discs are conveniently
displayed at the bottom of the screen.
VCR playback: Control the connected
VCR.
HDD Recordings playback: Control
recordings stored in HDD.
Audio Out to Home Theater speaker/
Audio Out to TV: Select Home Theater
speaker or TV speaker for Audio Out.
ꔉ Enter ꕉ Exit
◀
1
On
▶
Watch TV
2
◀ DISC 1
▶
►When no device is connected (displayed in gray)
3
◀ VCR 1
▶
►Selected Device
HDD/DVD-R
HD HT
4
HDD Recorder
5
◀ Speaker
TV Speaker
WATCHING TV / CHANNEL CONTROL
2
Watch TV
HDD/DVD-R
Display SIMPLINK menu.
▶
►When a device is conected (display checked)
▶
SIMPLINK Functions
ꔛ
Direct Play: After connecting AV devices to
the TV, you can directly control the devices and
play media without additional settings.
ꔛ Select AV device: Enables you to select one of
the AV devices connected to the TV.
ꔛ Disc playback: Control connected AV devices
by pressing the ꕌꕍ< >, ENTER, ꕖ, ꕗ, ꕘ, ꕚ
and ꕙ buttons.
ꔛ Power off all devices: When you power off the
TV, all connected devices are turned off.
ꔛ Switch audio-out: Offers an easy way to switch
audio-out.
ꔛ Sync Power on: When the equipment with
Simplink function connected HDMI terminal
starts to play, The TV will automatically turn on.
Note: To operate SIMPLINK, an High Speed
HDMI cable *CEC function should be used.
(*CEC: Consumer Electronics Control).
(A device, which is connected to the TV through
a HDMI cable but does not support SIMPLINK,
does not provide this function)
! NOTE
► Connect the HDMI/DVI IN or HDMI IN
terminal of the TV to the rear terminal
(HDMI terminal) of the SIMPLINK device
with the HDMI cable
► When you switch the Input source with
the INPUT button on the remote control,
the SIMPLINK device will stop.
► When you select a device with home
theater functionality, the sound output
automatically switches to the home
theater speakers and the TV speakers
are turned off.
► If a connected SIMPLINK home theater
system doesn’t play the audio from the
TV, connect the DIGITAL AUDIO OUT
terminal on the back of the TV to the
DIGITAL AUDIO IN terminal on the back
of the SIMPLINK device with an OPTICAL
cable.
75
WATCHING TV / CHANNEL CONTROL
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE) (For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA, 42/47LX6500-DD)
Programme Guide
ꔌ
1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
ALL
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
4 TV..
5 YLE FST
6 CNN
8 YLE24
Mode
GUIDE
Display the Programme Guide.
15:00
▼
2 YLE TV2
ꘂ Favourite
Tue. 25 Nov.
14:00
1 YLE TV1
Select the desired programme.
76
25 Nov. 2008 10:05
That ’70s show
◄
WATCHING TV / CHANNEL CONTROL
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
The EPG displays the programme details for next 8 days.
...
ꔍ
꘍ Information
Date
Watch/Schedule
Manual Timer
TV/RAD
RADIO
Schedule List
NOW/NEXT Guide Mode
You can view a programme being broadcasted and one scheduled to follow.
RED
Change EPG mode.
Programme Guide
YELLOW
ꔌ
Enter Manual Timer mode.
25 Nov. 2008 10:05
That ’70s show
ALL
BLUE
ENTER
Enter Schedule List mode.
When ‘Now’ is selected, it is moved to
selected programme and EPG disappears
When ‘Next’ is selected, a reservation
pop-up window appears.
Select NOW or NEXT Programme.
Select the Broadcast Programme.
CH
P
A
G
E
Page Up/Down.
1 YLE TV1
NOW
NEXT
That ’70s show
2 YLE TV2
Your World Today
4 TV..
Legenen om Den....
Naturtimmen
Lyssna
Glamour
5 YLE FST
6 CNN
8 YLE24
ꘂ Favourite
Mode
ꔍ
꘍ Information
Keno
World Business
Fantomen
Kritiskt
ABC
Tänään otsikoissa
Watch/Schedule
Manual Timer
TV/RAD
RADIO
Schedule List
WATCHING TV / CHANNEL CONTROL
1 YLE TV1 25 Nov. 2008 09:45~10:15
77
WATCHING TV / CHANNEL CONTROL
8 Day Guide Mode
RED
Change EPG mode.
Programme Guide
ꔌ
25 Nov. 2008 10:05
GREEN
Enter Date setting mode.
1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
ALL
15:00
▼
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
2 YLE TV2
Enter Schedule List mode.
4 TV..
5 YLE FST
6 CNN
8 YLE24
ꘂ Favourite
...
ꔍ
꘍ Information
ENTER
Watch/Schedule
Date
Mode
Manual Timer
TV/RAD
RADIO
Schedule List
When ‘Currently broadcasting programme’ is selected, it is moved to
selected programme and EPG disappears When ‘Future broadcasting programme’ is selected, a reservation popup window appears.
Select Programme.
Select the Broadcast Programme.
Date Change Mode
Programme Guide
GREEN
Switch off Date setting mode.
ꔌ
25 Nov. 2008 10:05
That ’70s show
1 YLE TV1 25 Nov. 2008 09:45~10:15
◄
ENTER
ALL
Change to the selected date.
4 TV..
5 YLE FST
6 CNN
8 YLE24
GUIDE
or
EXIT
Switch off EPG.
15:00
▼
2 YLE TV2
Select a date.
Tue. 25 Nov.
14:00
1 YLE TV1
...
◄
WATCHING TV / CHANNEL CONTROL
BLUE
Enter Manual Timer mode.
Tue. 25 Nov.
14:00
1 YLE TV1
YELLOW
◄
That ’70s show
Kungskonsumente
Antigues Roadshow
The Drum
Mint Extra
TV2: Farmen
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
ꔍ
Date Change
Date Exit
Detailed Information Box
1 YLE TV1 25
GUIDE
INFO
Detail information on or off.
Text Up/Down.
Fia World Touring Car Chanpionship
Tue. 25 Nov. 2008 10:05
25 Nov. 2008 10:05
12:40
Fia Champion
Miss Gotto's Haunted house/Cry of The Swamp; Miss Gotto's
Haunted house/Cry of The Swamp; Miss Gotto's Haunted house/
Cry of The Swamp; Miss Gotto's Haunted house/Cry of The
Swamp; Miss Gotto's Haunted house/Cry of The Swamp; Miss
Gotto's Haunted house/Cry of The Swamp;
Select Watch TV or Close.
Watch TV
GUIDE
78
or
EXIT
Switch off EPG.
Close
Remind Setting Mode
sets a start time on the channel for the reminder.
YELLOW
Change to Manual Timer mode.
Manual Timer
Select time to remind.
ENTER
Select your desired Option.
Sun.
Tue.
Wed.
Select
10 time to11remind
09
17
18
Thu.
12
13
Start19Time
20
24
25
15 26
: 09
27
Sat.
14
21
Channel
ꔌ
23
Fri.
Wed. 12 Aug. 2009
15
WATCHING TV / CHANNEL CONTROL
16
Select Remind function setting.
Wed. 12 Aug. 2009 13:46
Mon.
22
No schedule list
Close
DTV 80128ANTV D... 29
ꔍ
30
31
01
02
03
04
05
Prev.
OK
Select Start Time or Channel.
Move
OK
Programme Guide
ENTER
BACK
Exit
Schedule List
Save Timer Remind.
Switch off EPG.
Schedule List Mode
If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even
when you are watching a different programme at the time.
BLUE
Change to Guide mode.
Schedule List
Page1/1
ENTER
Start Date
Select your desired Option (Modify/
Delete/Delete All).
Fri. 6 Apr. 2007 15:09
Start Time
Title
6 May
16:00
Friend1
6 May
18:00
Friend2
Repeat
Friend2
16:00
Select Schedule List.
CH
P
A
G
E
Page Up/Down.
Manual Timer
BACK
Delete
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
Move
►
Modify
Modify
Delete All
Close
Modify/Delete
ꨃ Page Change
Exit
Channel Guide
Switch off EPG.
79
BLUETOOTH
BLUETOOTH
(FOR 32/42/47/55LE5500, 42LE5550, 32/42/47/55LE7500,
50/60PK950R, 42/47LE8500, 42/47LX6500)
BLUETOOTH?
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various
types of information devices such as computers, cell phones and PDAs, as well as digital appliances
through wireless connection, without having to connect any cable, to enable data exchange.
With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset
or receive images(only JPEG), listen to music from the Bluetooth enabled cell phone using this TV.
BLUETOOTH
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Communication Spec.: Bluetooth Specification Version 2.0 + EDR (Enhanced Data Rate)
Output: Bluetooth Specification Power Class 2
Maximum Communication Range: Line of open sight approx. 10 m (30 ft)
Frequency Band: 2.4 GHz band (2.4 GHz to 2.4835 GHz)
Bluetooth Module: RBFS-B721A(LG Electronics)
Compatible Bluetooth Profile : GAVDP(Generic Audio/Video Distribution Profile), A2DP(Advanced
Audio Distribution Profile), OPP(Object Push Profile), BIP(Basic Imaging Profile), FTP(File Transfer
Profile)
Precautions when using the Bluetooth
►Use within 7 m (-45°- 45°) range. If you use the device out of the range or within the range with
obstacles, it can result in communication error.
►Communication error can occur depending on the surrounding devices.
►Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause
communication error by using the same frequency bandwidth.
►The device search time differs depending on the number of Bluetooth devices and the operating
situation.
►The probability of search increases with less number of devices.
►Electromagnetic wave can be interfered with applicable wireless devices.
►Because applicable wireless devices have the possibility of electromagnetic wave interference, they
cannot provide services related to human life.
►You can only connect one Bluetooth device at a time.
►You cannot receive photos(only JPEG) or listen to music from other Bluetooth devices while using
the Bluetooth headset.
►For details of Bluetooth, refer to the user manual of the Bluetooth device.
►Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
►Bluetooth can be used about 30 seconds after the power is turned on.
►Depending on the transmission processing method and performance of the headset used, the audio can be
instantly disconnected.
QDID(Qualified Design Identity): B015199
80
SETTING THE BLUETOOTH
If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images
from an external device and view them on the TV, listen to music from cell phone(Bluetooth device), you
can use the wireless communication without having to connect any cables.
ꕉ Exit
Bluetooth
BLUETOOTH
ꔂ Move
ꔉ Enter
Bluetooth on
1
MENU
2
ENTER
ENTER
Select BLUETOOTH.
ꔛ
Start Bluetooth On.
ꔛ
3
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
BLUETOOTH
Bluetooth is off.
Select ‘Bluetooth On’ to turn on Bluetooth.
You can use the BLUETOOTH menu
by selecting “Bluetooth on”.
If you do not want to use the Bluetooth
function, select “Bluetooth off”.
If it is connected to the external
Bluetooth device, you can select
“Bluetooth off” after disconnecting
the device.
81
BLUETOOTH
CONNECTING THE BLUETOOTH HEADSET
When you select the Bluetooth headset, you can listen to the TV audio in the Bluetooth headset
through wireless communication.
You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device.
A maximum of 12 devices can be paired.
When the unit is searching for the Bluetooth headset, other buttons except for the “Stop” (ENTER
button) do not work.
Connecting a new Bluetooth headset
BLUETOOTH
You can only search for the new Bluetooth headset only in the Disconnected condition.
When you run the search, it will show you the list of all Bluetooth headsets responding.
After new Bluetooth device is searched, the PIN number is validated to connect the device. For details,
refer to the user manual of the applicable device.
Bluetooth
ꕉ Exit
ꔂ Move
Searching Bluetooth headset
ꔉ Enter
Bluetooth off
1/1
42LE5500
New
No bluetooth device.
Search headset
ꔅ My Info
1
2
3
4
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
5
ENTER
6
82
ENTER
MENU
Select BLUETOOTH.
ENTER
Select Search headset.
ENTER
Select the desired Bluetooth headset.
Select the desired Bluetooth headset PIN
number. Refer to the user manual of the
applicable device for the PIN number.
Connect the Bluetooth headset.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Stop searching
Connecting to Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top.
When connecting the Bluetooth device already registered, you can select and connect directly without any PIN
validation.
ꕉ Exit
Bluetooth
ꔂ Move
ꕉ Exit
Bluetooth
ꔉ Enter
Bluetooth off
ꔂ Move
ꔉ Enter
Bluetooth off
Connecting headset
Search headset
DR-BT140Q
PLT 510
sgh-e760
ꔅ Remove Device
ENTER
MENU
2
Disconnect
ꔅ My Info
ꔅ Remove Device
Select BLUETOOTH.
ꔛ
ꔛ
Connect the Bluetooth headset.
ENTER
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔅ My Info
After connecting/using the Bluetooth
headset, the headset setting will be
the Disconnected condition automatically when you turn off the power
of the TV and then turn on.
After connecting the Bluetooth headset, the TV speaker is switched to
Mute condition and the sound will
only be generated from the headset.
Select the Bluetooth headset.
3
PLT 510
00:19:7f:ff:4a:1a
BLUETOOTH
1
No device
Disconnecting the Bluetooth headset during use
ꕉ Exit
Bluetooth
ꔂ Move
ꕉ Exit
Bluetooth
ꔉ Enter
Bluetooth off
ꔂ Move
Bluetooth off
Bluetooth headset is connected.
Disconnect
Do you want to disconnect headset?
PLT 510
00:19:7f:ff:4a:1a
Disconnect
PLT 510
00:19:7f:ff:4a:1a
Disconnect
ꔅ My Info
1
MENU
2
3
ENTER
Select BLUETOOTH.
Select Disconnect.
ENTER
ꔉ Enter
Cancel
ꔅ My Info
4
ENTER
5
Disconnect the Bluetooth headset.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Select Disconnect.
83
BLUETOOTH
When requesting to connect to TV from the Bluetooth headset
When the Bluetooth menu is "On" and there is a connection
request from the headset, this message is dispalyed.
Not all headsets support the this feature.(Refer to the user manual of the applicable Bluetooth headset.)
Some headset types may make an attempt at connection when
they are turned off/on even though they are not included in the
Registered Device list.
1
ENTER
i Do you want to use your headset?
Yes
No
Select Yes or No.
BLUETOOTH
! NOTE
► LG recommends the following headset models.
: Plantronics VOYAGER-855 / SONY HBHDS970, HBH-DS980 / Motorola S605
There might be an audio delay, depending
on the buffer memory size of the headset.
► The stereo headsets officially certified to be
Bluetooth compatible can be searched and
connected.
► The stereo headsets that support A2DP functionality can be connected.
► If the surrounding environment of the TV is as
follows, the device may not be searched or
connected properly.
-If there is strong electromagnetic interference.
-If there are many Bluetooth devices.
-If the headset is turned off, not in place or has
an error.
-Because products such as microwave oven,
wireless LAN, plasma light, gas range etc., use
the same frequency range, it can cause communication errors.
► Only one Bluetooth device can be connected
at a time.
►Connection that is lost due to the TV being
turned off etc. will not be automatically recovered. Try connecting the applicable device again.
► Some operations can be slower while operating the headset.
► Even if you choose simplink Home Theater
after using the headset during Simplink operation, the unit will not automatically switch to
Home Theater speakers.
► When the headset connection continuously
fails, pair the device one more time.
► When a Bluetooth headset is in use, the
Volume +/- and Mute keys do not work, and
the Audio menu returns to the default value
and is disabled.
► With Bluetooth set to On, if any registered
devices are turned on, the TV will switch to
Bluetooth mode automatically even though
you are watching in another input mode. In
this case, set Bluetooth to Off.
REMOVE THE BLUETOOTH DEVICE
When 12 devices are registered, you cannot register any more devices, and the external device will no
longer be able to pair up with the TV. In this case, you should delete one (disconnect first if a device
is connected to the TV) and then you can register another device.
"Remove device" will be available when selecting the device that is not connected to the TV.
Bluetooth
Bluetooth
ꕉ Exit
ꔂ Move
ꔉ Enter
Bluetooth off
Bluetooth off
Search headset
DR-BT140Q
PLT 510
ꔅ Remove Device
1
MENU
2
RED
3
84
ꕉ Exit
ꔂ Move
ENTER
sgh-e760
Do you want to delete the selected Bluetooth
device?
PLT 510
00:19:7f:ff:4a:1a
Delete
Select BLUETOOTH.
Cancel
ꔅ My Info
ꔅ My Info
Select Remove Device.
Select Delete.
Disconnect
No device
ꔉ Enter
4
ENTER
5
Remove the Bluetooth device
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
MY BLUETOOTH INFORMATION
Bluetooth
ꕉ Exit
ꔂ Move
ꔉ Enter
Bluetooth
ꕉ Exit
i
Bluetooth off
Search headset
Bluetooth off
DR-BT140Q
PLT 510
sgh-e760
ꔅ Remove Device
1
ENTER
MENU
2
BLUE
3
4
No device
Search headset
0000
TV address
GLOBAL-PLAT2
00:05:c9:51:06:f3
Close
ꔅ Remove Device
ꔛ
ꔉ Enter
Setup TV PIN.
Setup TV name.
ꔅ My Info
Select BLUETOOTH.
My Info
ꔂ Move
BLUETOOTH
This function provides the My Bluetooth Information to the user.
"Edit" will be available when TV is not connected with any device.
You can edit the Setup TV PIN or Setup TV name.
You can check the TV address.
To accept connection from an external Bluetooth device or to connect to an external Bluetooth device,
the PIN needs to be entered.
For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the
applicable device.
The TV PIN is composed of numbers of up to 16 digits.
The TV PIN must have more than 1 digit.
ꔅ My Info
Press the < button to delete digits
one by one.
Select My Info.
Select Setup TV PIN or Setup TV name.
1
ENTER
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
5
ENTER
6
You can use an the alphabet A to Z,
the number 0 to 9 and blank.
Save.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
85
3
BLUETOOTH
VIEWING THE PHOTOS WITH BLUETOOTH DEVICE
You can view the photos(*.JPG) that were received from an external Bluetooth device to the TV.
To see the detailed informations about connecting the external Bluetooth device, refer to the user
manual of the applicable device.
The On Screen Display on your model may be slightly different.
Receiving picture(s)
ꕉ Cancel
BLUETOOTH
◀
꘤ Rotate
1/2
Hide
▶
ꕉ Exit
► ꘤ (Rotate) : Rotate photos.
ꔛ Every time you press ENTER button on ꘤ (Rotate),
rotates the photo 90° clockwise.
► Hide : Hide the menu on the full-sized screen.
ꔛ To see the menu again on the full-sized screen, press
ENTER button to display.
► Exit : Move to the previous menu screen.
1
ENTER
Select the each menu.
! NOTE
► Supported maximum photo size is up to 10MB.
► You cannot receive the photos while using the Bluetooth headset or listening to the musics from
Bluetooth device.
► On receiving the photos, press the BACK button to stop. At this time, all photos received will be
deleted.
► Some Bluetooth devices may not support sending the photos.
LISTENING THE MUSICS WITH BLUETOOTH DEVICE
You can listen to the musics (A2DP) that were received from an external Bluetooth device to the TV.
To see the detailed informations about connecting the external Bluetooth device, refer to the user
manual of the applicable device.
Listening to bluetooth music...
Press any key to finish.
ꔛ
ꔛ
ꔛ
Press the VOL + or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
Press the BACK button to return to normal TV viewing.
! NOTE
86
► You cannot listen to the musics while using the Bluetooth headset or receiving the photos.
► Some Bluetooth devices may not support listening the music via TV speaker system.
►With some Bluetooth device, the sound can be slow or discontinued from time to time.
3D IMAGING (FOR 42/47LX6500)
3D TECHNOLOGY
This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such
as a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate
pictures formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in
3D format.
Viewing 3D Imaging
WARNING
Also certain symptoms can occur in unspecified conditions without any previous history. If
you experience any of the following symptoms,
immediately stop watching the 3D imaging and
consult a doctor: dizziness or lightheadedness,
visual transition or altered vision, visual or facial
instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience,
confusion or disorientation, loss of directional
sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these
symptoms as they may be more sensitive to the
effects of watching 3D TV.
3D VIDEO
►When viewing 3D imaging, watch the TV from
an effective viewing angle and within the appropriate distance. If you exceed this viewing angle
or distance, you may not be able to view the 3D
imaging. Furthermore, the 3D imaging may not
display if it is viewed while you are lying down.
►If you watch the 3D imaging too closely or for a
long period of time, it may harm your eyesight.
►Watching the TV or playing video games that
incorporate 3D imaging with the 3D glasses
for a long period of time can cause drowsiness,
headaches or fatigue to you and/or your eyes. If
you have a headache, or otherwise feel fatigued
or drowsy, stop watching the TV and take a rest.
►Pregnant woman, seniors, persons with heart
problems or persons who experience frequent
drowsiness should refrain from watching 3D TV.
►Some 3D imaging may cause you to duck or
dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near
fragile objects or near any objects that can be
knocked over easily.
► Please prevent children under the age of 5 from
watching 3D TV. It may affect their vision development.
►Warning for photosensitization seizure:
Some viewers may experience a seizure or epilepsy when exposed to certain factors, including
flashing lights or images in TV or video games.
If you or anybody from your family has a history
of epilepsy or seizure, please consult with your
doctor before watching 3D TV.
Risk of photosensitization seizure can be reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different in
each eye, they should watch the TV after taking vision correction measures.
- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV
- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness of
your situation before moving.
! NOTE
►To watch the TV in 3D, you must put on your
displayed under 3 wavelength lamp fluorescent
3D glasses. For best results, you should wear
light (50 Hz - 60 Hz) or magnetic fluorescent
LG Brand 3D glasses. The 3D imaging may not
lamp (50Hz - 60 Hz). In such instances, it is
display properly when using another brand of
recommended to turn the lights off.
3D glasses. Please see the 3D glasses manual ►If there is an obstacle between the TV and the
for instructions on how to use the 3D glasses.
3D glasses, the 3D imaging may not display
properly.
►After powering on the TV, a few seconds may be
needed for your TV to calibrate.
►Do not use the TV in close proximity to other
electronic equipments and IR equipments.
► It may take a moment for you to see the 3D
imaging if you look away from the TV and then ►In Analog TV, 3D Imaging does not work.
revert your eyes back to the 3D program.
►The TV may flicker slightly if the 3D imaging is
87
3D VIDEO
When using 3D Glasses
CAUTION
TV
►3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions.
►Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.
►Do not store the 3D glasses in hot or cold locations.
►Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
►Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
Shake off any dust before using the cloth since the glasses are easily scratched.
3D Imaging viewing range
TV size, viewing angle & other circumstances may change the
viewing distance and the angle of view.
2m
3D VIDEO
Viewing
Distance
2m-7m
(6.5 ft - 22.9 ft)
Viewing
Angle
120º (When the viewing distance is 2 m (6.5 ft))
60 ◦ 60 ◦
2m
7m
WATCHING 3D IMAGING
1 Play the video produced in 3D.
Refer to the following for the supported imaging.
Signal
720p
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
Resolution
1280x720
45
60
Top & Bottom, Side by Side
89.9/90
59.94/60
HDMI (V. 1.4 with 3D)
Frame Packing
37.5
75
1080i
1920X1080
HDMI
Input
1080p
USB
Input
DTV
1080p
1920X1080
1920X1080
Playable 3D video format
Top & Bottom, Side by Side
50
HDMI (V. 1.4 with 3D)
Frame Packing
33.75
60
28.125
50
67.50
60
56.250
50
Top & Bottom, Side by Side
27
24
Top & Bottom, Side by Side,
Checker Board
53.95/54
23.98/24
HDMI (V. 1.4 with 3D)
Frame Packing
33.75
30
Top & Bottom, Side by Side,
Checker Board
33.75
30
Top & Bottom, Side by Side
Checker Board, MPO(Photo)
Top & Bottom, Side by Side
Top & Bottom, Side by Side,
Checker Board,
Single Frame Sequential
Signal
Playable 3D video format
720p, 1080i
Top & Bottom, Side by Side
For 3D video feed that is input in the HDMI (V. 1.4 with 3D) Frame Packing format, it is automatically
switched to 3D.
Media contents and a player need to support HDMI (V. 1.4 with 3D) Frame Packing to play Frame Packing
format stereoscopic.
Video, which is input as HDMI (V. 1.4 with 3D) Frame Packing format, is switched into the stereoscopic
screen automatically.
88
2
ENTER
3D
After selecting the shape as shown in the screen on TV,
wear the 3D glasses.
To turn on 3D Mode, select this icon.
ꔁMove
ꔉEnter
ꕯ Exit
Top & Bottom
3
ENTER
or
Side by Side
L/R SELECT
Checker Board
Frame Sequential
Select Setting Left/Right.
4
ENTER
Select Left/Right or Right/Left.
Select the screen with 3D
video with better visibility.
ꔑ Left/Right
□ Right/Left
3D
ꔉ Enter
End 3D Video
3D VIDEO
ꔅ Setting Left/Right
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
ꕯ Exit
ꔅ Setting Left/Right
3D
5
End 3D Video
3D
The 3D imaging mode is changed
to the 2D imaging mode.
! NOTE
► If you select 3D mode, "Power indicator" is turned off automatically.
► While watching 3D imaging, you cannot adjust video/audio settings using the menu.
► Some menus may not work while watching the TV in 3D.
► You can only choose "Standard → Cinema → Game" with the AV MODE button on remote control.
AV Mode is set as Standard while playing in 3D.
► The 3D imaging mode is disabled automatically when switching DTV channels.
► The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.
►3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied
to the TV.
► For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
► Energy Saving is disabled while playing in 3D.
► If you'd like to play the BGM using *.mpo file(3D camera file), In advance, the contents path for
BGM should be set on full-sized photo view screen which isn't *.mpo file(3D camera file).
NOTES FOR VIEWING 3D IMAGE WITH 3D BROADCASTING (* In Analog TV, 3D Imaging does not work.)
When switching the 2D image display to the
3D image display with the 3D button on the
remote control, the overlapped image may be
displayed.
If the screen is divided into
left/right or top/bottom when
you change the channel
If your eyes are soaring or the screen looks
blurry while viewing 3D images
ꔛ
ꔛ
Disable the 3D imaging mode with the 3D button.
The 3D imaging mode is disabled automatically
if you change the channel.
ꔛ
This channel supports the 3D imaging mode.
Select the 3D imaging type displayed on the
screen by pressing the 3D button on the remote
control.
ꔛ
Press the L/R SELECT button on the remote control and select L/R or R/L, which you find better
for viewing 3D images.
89
MY MEDIA
MY
MEDIA
ENTRY MODE
When the Pop Up menu does not appear, you can select Movie List, Photo List or Music List in the
USB menu.
Setup a USB device or DLNA with the TV to use MY MEDIA
Please select the device.
Page 1/1
USB Label
MY MEDIA
USB Label
Movie List
Photo List
USB Label
Music List
DLNA
DLNA
MY MEDIA
ꔉ Device Selection
ꔅ Search
1
2
3
MENU
Select MY MEDIA.
ENTER
Select Movie List, Photo List
or Music List.
ENTER
Select the desired device.
3
BACK
Return to the previous menu.
BLUE
Search other network device.
ꔛ
ꕉ Previous
This TV can view JPG image files and HD
DivX files and play MP3 audio files.
When removing the USB device
Select the USB Device menu before
removing the USB device.
1
Q.MENU
2
ENTER
90
Select USB Device.
Select Eject.
CONNECTION METHOD
USB Connection
i.e)
IN 4
jack on the TV.
USB IN 1
1 Connect the USB device to the USB IN
Memory Key
Precautions when using the USB device
MY MEDIA
►Only a USB storage device is recognizable.
►Connecting a USB storage device through a USB hub is not supported.
►A USB storage device which uses its own driver may not be recognized.
►The recognition speed of a USB storage device may depend on each device.
►Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
►Only use a USB storage device which has normal music files, image files, or movie files.
►Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system
provided with the Windows operating system. Others may not be recognized.
►Some USB storage devices require a power adapter. The power adapter must be connected in
order to be seen by the TV.
►If a device is not recognized by the TV, try a different cable. Excessively long cables are not supported.
►Some USB storage devices may not be supported or operate properly.
►Please backup important files because data on USB device could be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.
►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you
can use up to 4 partitions or USB memory devices.
►File alignment method of USB storage device is similar to Window XP and file names can be up
to 100 English characters.
►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for
USB memory.
►If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off
and on again to make it work properly. Refer to the user manual of the USB external hard disk.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in
the movie list.
►Maximum of 999 folders or files can be recognized under one folder.
►If there are too many folders and files in one folder, it may not operate properly.
91
MY MEDIA
DLNA
About DLNA
This TV can display and play many types of movie, photo and music files from your DLNA server and
has been certified by DLNA for photos.
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics,
computing industry and mobile device companies. Digital Living provides consumers with easy sharing
of digital media through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA
server software or other DLNA compatible device is connected to this TV, some setting changes of
software or other devices may be required.
Please refer to pages 93~115 for additional information on supported file types and other instructions.
MY MEDIA
92
! NOTE
►The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for
sharing files and folders to this TV.
►The supplied Nero MediaHome 4 Essentials software does not support following functions:
Transcoding, Remote UI, TV control, Internet services and Apple iTunes
►This manual explains operations with the English version of Nero MediaHome 4 Essentials as
examples. Follow the explanation referring to the actual operations of your language version.
►If there are too many folders and files in one folder, it may not operate properly.
►For the DLNA option, use the Nero MediaHome programme that is provided with the TV.
However, we cannot guarantee that third party program will work perfectly.
►You can select a channel while viewing the small preview channel list on your TV screen.
►Check your network settings when the DLNA option does not work properly.
►If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may
not work properly. In this case, exit Nero Media Home and restart the programme. You can
download the latest version of Nero Media Home by clicking the question mark at the bottomleft of the program.
►When the network is unstable, the device may be slower or may need to load during playback.
►When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported.
►When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from
the original.
►When more than one TV is connected to a single server in DLNA mode, a file may not play
properly, depending on the server performance.
►If the play time information is not provided by the server, it is displayed as "--:--:--."
►When using Movie List, DRM/*.tp/*.trp files in the DLNA server cannot be played.
►DLNA operation may not work properly according to the AP manufacturers.
Installing Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. If you are already
using DLNA server software on your PC, Nero MediaHome is not required. Nero MediaHome is not
required for Windows 7 since it has a built-in DLNA server.
1
Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
An installation wizard will walk you through the quick and uncomplicated installation process.
2
Close all Microsoft Windows programs and exit any anti-virus software that may be running.
3
Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
4
Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard appears.
5
Click the Next button to display the serial number input screen.
Click Next to go to the next step.
6
If you accept all conditions, click I accept the License Conditions check box and click Next.
Installation is not possible without this agreement.
7
Click Typical and click Next. The installation process is started.
8
If you want to take part in the anonymous collection of data, select the check box and click the
Next button.
9
Click the Exit button to complete the installation.
MY MEDIA
Requirement PC system before you install Nero MediaHome 4 Essentials
ꔛ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP
Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
ꔛ Windows Vista® 64-bit edition (application runs in 32-bit mode)
ꔛ Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone
ꔛ 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
ꔛ Memory: 256 MB RAM
ꔛ Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and
16-bit color settings
ꔛ Windows® Internet Explorer® 6.0 or higher
ꔛ DirectX® 9.0c revision 30 (August 2006) or higher
ꔛ Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)
93
MY MEDIA
Sharing files and folders
After installing Nero MediaHome, you must add folders you wish to share.
MY MEDIA
1
Double-click the Nero MediaHome 4 Essentials icon on the desktop.
2
Click Network icon on the left and define your network name in the Network name field. The
Network name you enter will be recognized by your TV.
3
Click Shares icon on the left.
4
Click Local Folders tab on the Shared screen.
5
Click Add icon to open the Browse Folder window.
6
Select the folder containing the files you want to share. The selected folder is added to the list of
shared folders.
7
Click Start Server icon to start the server.
! NOTE
►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders
tab and click Rescan Folder at the More button.
►Visit www.nero.com for more information and software tools.
94
Playing back shared contents
You can display and play movie, photo and music content stored on your computer or other DLNA
media servers.
1 Start the server on your computer or other device that connected on your home network.
2
3
4
MENU
Select MY MEDIA.
ENTER
Select Movie List, Photo List or Music List.
ENTER
Select the DLNA.
Depending on the media server, this TV may need to get the permission from
the server.
If you want to re-scan available media server, press blue color button.
►To play the file on the media server, the TV and the media server must be connected to the
same access point.
►Because the compatibility and available playback functions on the MY MEDIA menu are tested
on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and
playback functions on the MY MEDIA may differ depending on media servers.
►The file requirements on this page are not always compatible. There may have some restrictions
by file features and media server’s ability.
►Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.
►Movie thumbnail is not supported in DLNA Movie.
►If there is an unplayable music file in the MY MEDIA menu, the TV will skip the file and play next
file.
►The file information indicated on the screen may not always correct for music and movie files in
MY MEDIA menu
►This TV only supports movie subtitle files supplied by Nero MediaHome 4.
►The subtitle file name and movie file name have to be the same and located at the same folder.
►If subtitle files have been added after a directory has been indexed already, the user has to
remove and re-add the folder to the list of shares.
►The playback and operating quality of the MY MEDIA function may be affected by your home
network condition.
►The files from removable media such as USB drive, DVD-drive etc. on your media server may
not share properly.
►When playing the Media through DLNA connection, it does not support the DivX file play which
is protected by DRM.
►Up to 200 folders in one folder and 1000 including folders and files can be recognized.
►If there are too many folders and files in one folder, it may not operate properly.
MY MEDIA
! NOTE
95
MY MEDIA
MOVIE LIST
It displays all of the video files it recognizes.
The On-Screen Display on your model may be slightly different.
Supported movie file
ꔛ Resolution: under 1920 pixel (width) x 1080 pixel (height)
ꔛ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720)
ꔛ Max bitrate of playable video file: 20 Mbps (Mega bit per second)
ꔛ Bit rate of audio format: within 32 kbps to 320 kbps (MP3)
ꔛ Supported external subtitle format: *.smi/*.srt/*.sub (MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt
(TMPlayer)/*.psb (PowerDivX)
ꔛ Supported Internal subtitle format: only XSUB (It is the subtitle format used in DivX6 files)
Precautions when playing the video files
MY MEDIA
96
►Some user-created subtitles may not work properly.
►Some special characters are not supported in subtitles.
►HTML tags are not supported in subtitles.
►Time information in an external subtitle file should be arranged in ascending order to be played.
►Changing font and color in subtitles is not supported.
►Subtitles in languages other than one specified are not supported.
►Video files with subtitle files of 1 MB or larger may not be played properly.
►The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
►A damaged video file may not be played correctly, or some functions may not be usable.
►Video files produced with some encoders may not be played correctly.
►If the video and audio structure of recorded file is not interleaved, the file not playback properly.
►Video with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for smooth playback.
►Video files other than the specified types and formats may not work properly.
►The movie file encoded by the GMC (Global Motion Compensation) and Qpel (Quarterpel Motion
Estimation) is not supported.
►Only 10000 sync blocks are supported within the subtitle file.
►We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
►DTS Audio codec is not supported.
►A video file more than 30GB in file size is not supported for playback.
►Playing a video via a USB connection that doesn’t support high speed may not work properly.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►The video file and its subtitle file must be located in the same folder.
At this time, a video file name and its subtitle file name must be identical for it to be displayed.
►When you are watching a movie via the Movie List function, you can adjust the picture with the
ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode
is not supported.
►Trick Mode does not support other functions than ꕙ if video files do not have index information.
►When playing video file using network, the Trick mode is limited to 2-times speed.
►Video file names that contain special characters may not be playable.
Supported Video Formats
File
Extensions
Audio/
Video
Codec
VC-1 Advanced Profile
Advanced Profile@Level 3
(e.g. 720p60, 1080i60, 1080p30)
VC-1 Simple and Main Profiles
Simple Profile@Medium Level (e.g. CIF, QVGA)
Main Profile@High Level (e.g. 1080p30)
Video
.asf
.wmv
Audio
Profile/Level Support
Explanation
Only streams compliant
to SMPTE 421M VC-1
standard are supported.
WMA Standard
WMA 9 Professional
DivX3.11
Video
.divx
.avi
DivX4
DivX5
DivX6
XViD
H.264 / AVC
.mp4
.m4v
MPEG-1 Layer I, II
MPEG-1 Layer III (MP3)
Dolby Digital
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-4 Part 2
Advanced Simple Profile (e.g. 720p/1080i)
Video
Audio
MP3
Video
H.264 / AVC
.mkv
Audio
Audio
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Global motion compensation or quarterpel
motion estimation does
not supported. Streams
using this syntax are not
supported.
Most of the MKV content available is encoded by the open source
x264 codec.
MP3
Dolby Digital
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-2
Main Profile@High Level(e.g. 720p60, 1080i60)
VC-1
Simple Profile@Medium Level
(e.g. CIF, QVGA)
Main Profile@High Level
(e.g. 1080p30)
Advanced Profile@Level3
(e.g. 720p60, 1080i60, 1080p30)
Video
.ts
.trp
.tp
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Global motion compensation or quarterpel
motion estimation does
not supported. Streams
using this syntax are not
supported.
MY MEDIA
Audio
Advanced Simple Profile
(e.g. 720p/1080i)
Only streams compliant
to SMPTE 421M VC-1
standard are supported.
MPEG-1 Layer I, II
MPEG-1 Layer III (MP3)
Dolby Digital
MP3
Video
.vob
.mpg
MPEG-1
MPEG-2
Audio
Dolby Digital
MPEG-1 Layer I, II
DVD-LPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
Main Profile@High Level (e.g. 720p60, 1080i60)
Main Profile@High Level (e.g. 720p60, 1080i60)
Only streams compliant
configured properly for
TS, PS or ES
97
MY MEDIA
Screen Components
1
MENU
Select MY MEDIA.
2
ENTER
Select Movie List.
ENTER
1
1
2
3
4
5
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/ total pages of
contents
2
Page 1/1
Movie List
Drive1
USB 1 XTICK
M001
Page 1/1
M002
M003
M004
H006.avi
4
MY MEDIA
ꔂ Move
ꔅ Change Device
Abnormal files are
displayed using this
graphic.
ꔅ To Photo List
ꔅ Change Numbers
ꔉ Play
ꘃ Page Change
ꔅ Mark Mode
3
98
Change device.
GREEN
Move to Photo List or Music List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
ꘁ Mark
ꕯ Exit
Non-supported files
are displayed using
this graphic.
RED
5
Movie Selection
Page 1/1
Movie List
1
Drive1
USB 1 XTICK
S_1
S_2
S_5
S003.avi
S_3
S_4
2
3
ꔂ Move
ꔅ Change Device
ꔅ To Photo List
Select the target folder or drive.
Page 1/1
ꔉ Play
ꔅ Change Numbers
ꘃ Page Change
ENTER
Select the desired
movie title.
Play the movie file.
ꘁ Mark
ꕯ Exit
ꔅ Mark Mode
ENTER
ꔛ
Use the CH (ꕌꕍ) button to navigate
in the movie page.
Mark Mode
1
Drive1
USB 1 XTICK
S_1
S_2
S_5
S003.avi
Select the target folder or
drive.
Page 1/1
S_3
2
S_4
3
ENTER
Select the desired
movie title.
MY MEDIA
Page 1/1
Movie List
Mark Mode
MARK
FAV
Mark your desired movie file.
CHAR/NUM
ꔂ Move
ꔅ Play Marked
RED
ꔅ Mark All
ꔅ Unmark All
ꔉ Mark
ꘃ Page Change
ꔅ Exit Mark Mode
Play Marked: Play the first selected file. Once
a movie finishes playing, the next selected
one will be played automatically.
GREEN
Mark All: Mark all files in the folder.
YELLOW
Unmark All: Deselect all marked files.
BLUE
ꘁ Mark
ꕯ Exit
4
ꔛ
RED
Play the marked movie file.
It displays the current movie
status progress bar on the bottom of the screen.
When one or more movie files are
marked, the marked movies will be
played in sequence.
Enter or exit the Mark Mode.
99
MY MEDIA
Using the Movie List Function
Choose options.
Set Video Play.
Set Video.
Set Audio.
Set 3D video.
ꔊꔋ
ꕖ
ꕗ
ꕖ
ꕘ
Close
01:02:30 / 02:30:25
ꕚ
ꕙ
ꕊ
꘩ Option
ꕉ Hide
ꕯ Exit
For 42/47LX6500
1
Show the Option menu.
Q.MENU
! NOTE
2
MY MEDIA
ENTER
Select Set Video Play, Set Video,
Set Audio or Set 3D video.
► When replaying a video file after stopping, you can play from where it stopped
automatically.
► If you select “Yes” when playing the
same file after the video file has been
stopped, it will restart where it stopped
previously.
► If continuous series files exist within the
folder, the next file will automatically be
played. But, this excludes cases when
the Repeat function of Movie List Option
is turned “On” or when set as Marked
Play.
Using the remote control
EXIT
Return to TV viewing.
Select the required speed: x2, x4, x8, x16, x32 (backward/forward).
Pauses the media player.
If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
Displays slow motion.
Move to a specific frame forward or backward while playing a video. A cursor indicating the position can be viewed on the screen. It may not work properly for
some movie files.
Return to normal playback.
BACK
ENERGY
SAVING
Hide the menu on screen. To see the menu again, press ENTER button.
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen (Refer to p. 130).
AV MODE
Press the AV MODE button repeatedly to select the desired source (Refer to p. 74).
100
Set Video Play Menu Options
Set Video Play.
Picture Size
◀
Full
▶
Audio Language
◀
1
▶
Subtitle Language
◀
On
▶
• Language
◀
English
▶
• Code Page
◀
English
▶
• Sync
◀
0
▶
• Position
◀
0
▶
• Size
◀
Normal
▶
Repeat
◀
Off
▶
ꔛ
1
2
Select Picture Size, Audio Language,
Subtitle Language, or Repeat.
Make appropriate adjustments.
ꔛ
Code Page
Subtitle Language Group
Supported Language
ꔛ
Latin1
English, Spanish, Portuguese
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Picture Size: Selects your desired
picture format for videos.
Full Mode: Files are played in full
screen mode regardless of the aspect
ratio of video.
Original Mode: Files are played
according to the aspect ratio of
video.
Audio Language: Changes the
Language Group of the audio for
video files. Files with a single audio
track cannot be selected.
Subtitle Language: The subtitles can
be turned on or off.
Language: Activated for SMI subtitles
and can select the language within
the subtitle.
Code Page: Subtitle font selection.
When set to default, Contents are
displayed in the language set in
"Option - Language - Menu
Language."
Sync: When the video is not synchronized with the captions, it can be
adjusted by 0.5 second.
Position: Move the location of the
subtitles.
Size: Changes the subtitle font size.
Repeat: Turn on/off repeat function
of movie playback. When turned on,
the file within the folder will be played
back repeatedly.
MY MEDIA
ꕉ Previous
101
MY MEDIA
* Image shown may differ from your TV.
Set Video Menu Options
For LED LCD TV/LCD TV
For Plasma TV
Set Video.
◀
Picture Mode
Set Video.
▶
Standard
• Backlight
70
◀
▶
Picture Mode
• Contrast
◀
▶
Standard
100
◀
▶
• Contrast
100
◀
▶
• Brightness
50
◀
▶
• Brightness
50
◀
▶
• Color
60
◀
▶
• Sharpness
50
◀
▶
▶
• Color
60
◀
0
◀ R
0
◀ W
◀
• Dynamic Contrast
Medium
• Edge Enhancer
◀
High
▶
• Tint
• Noise Reduction
◀
Medium
▶
• Color Temp.
▶
• Noise Reduction
◀
TruMotion
ꔅ Picture Reset
MY MEDIA
1
ENTER
BLUE
Low
◀
ꔅ Picture Reset
ꕉ Previous
▶
G
▶
C
▶
Low
▶
ꕉ Previous
Make appropriate adjustments.
Then, select Previous.
Reset picture settings to default.
Set 3D video Menu Options
Set Audio Menu Options
(For 42/47LX6500)
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
ꔉ Enter
▶
ꔅ Setting Left/Right
ꕉ Previous
1
ENTER
102
Make appropriate adjustments.
Then, select Previous.
3D
End 3D Video
For more information, see the 3D Imaging section in the Owner's Manual.
PHOTO LIST
The On-Screen Display on your model may be slightly different.
Supported photo file: *.JPG
ꔛ Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)
ꔛ Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height)
ꔛ You can play JPEG files only.
ꔛ Non-supported files are displayed in the form of predefined icon.
An error message occurs for corrupted files or file formats that cannot be played.
Corrupted image files may not be displayed properly.
It may take some time to view high-resolution images in full screen.
For 42/47LX6500
File
Extensions
jpeg
jpg
jpe
2D
Item
Profile
photo size
supproted file format
mpo
3D
photo size
MY MEDIA
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Min: 64 x 64
Max - Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
mpo
4:3 size: 3648 x 2736
2592 x 1944
2048 x 1536
3:2 size: 3648 x 2432
supproted file format
Screen Components
1
MENU
2
Select MY MEDIA.
ENTER
Select Photo List.
ENTER
1
2
Page 1/1
1
2
3
4
5
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/total pages of
contents
Abnormal files are
displayed using this
graphic.
Photo List
USB 1 XTICK
P001
Drive1
P002
P003
P004
Page 1/1
P005
P006
P007
P008
5
P009
4
ꔂ Move
ꔅ Change Device
ꔅ To Music List
ꔅ Change Numbers
ꔉ View
ꘃ Page Change
ꔅ Mark Mode
ꘁ Mark
ꕯ Exit
3
Non-supported files
are displayed using
this graphic.
RED
Change device.
GREEN
Move to Music List or Movie List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
103
MY MEDIA
Photo Selection
1
Page 1/1
Photo List
Select the target folder or drive.
USB 1 XTICK
Drive1
Page 1/1
2
3
ꔂ Move
ꔅ Change Device
ꔅ To Music List
ꔅ Change Numbers
ꔉ View
ꘃ Page Change
ꔅ Mark Mode
ꘁ Mark
ꔛ
ꕯ Exit
ENTER
ENTER
Select the desired photos.
Photo file is displayed.
Use the CH (ꕌꕍ) button to navigate
in the photo page.
MY MEDIA
Mark Mode
1
Page 1/1
Photo List
Mark Mode
Drive1
USB 1 XTICK
Page 1/1
2
3
Select the target folder or drive.
ENTER
Select the desired
photo files.
MARK
FAV
Mark your desired photo files.
CHAR/NUM
ꔂ Move
ꔅ View Marked
ꔅ Mark All
ꔅ Unmark All
ꔉ Mark
ꘃ Page Change
ꔅ Exit Mark Mode
ꘁ Mark
4
ꔛ
RED
104
View Marked: Display the selected photo.
GREEN
Mark All: Mark all photos on the screen.
YELLOW
Unmark All: Deselect all marked photos.
BLUE
Enter or exit the Mark Mode.
RED
View the marked photo files.
ꕯ Exit
When one or more photos are
marked, you can view individual photos or a slide show of the marked
photos. If no photos are marked, you
can view all photos individually or all
photos in the folder in a slide show.
How to View Photos
Detailed operations are available on full-sized photo view screen.
Page 1/1
Photo List
USB 1 XTICK
Drive1
Page 1/1
ꔂ Move
ꔅ Change Device
ꔅ To Music List
ꔉ View
ꔅ Change Numbers
ꘃ Page Change
ꘁ Mark
ꕯ Exit
ꔅ Mark Mode
MY MEDIA
01_a.jpg
2008/12/10
1920 x 1080
479 KB
◀
▶
◀
Slideshow ꘡
1
2
3
BGM ꘡
꘤
2/13
ꕲ
ꕊ
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
▶
꘩ Option
ꕉ Hide
Select the target folder or drive.
ENTER
ENTER
ꕯ Exit
ꔛ
Use the CH (ꕌꕍ) button to navigate
in the photo page.
Select the desired photos.
The selected photo is displayed in full
size.
105
MY MEDIA
01_a.jpg
2008/12/10
1920 x 1080
479 KB
4
ENTER
Select the Slideshow,
◀
BGM, ꘤ (Rotate),
▶
ꕲ/ꕳ, ꕊ (Energy Saving),
Option, Hide or Exit.
ꔛ
Slideshow ꘡
BGM ꘡
꘤
◀
2/13
ꕲ
ꕊ
▶
꘩ Option
ꕉ Hide
Use < > button to select the previous or next photo.
ꕯ Exit
MY MEDIA
► Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos
in the current folder are displayed during slide show.
ꔛ Set the time interval of the slide show in Option-Set Photo View. menu (Refer to p. 107).
ꔛ You can adjust Option by using the Q.MENU button on the remote control.
► BGM (Background Music): Listen to music while viewing photos in full size.
ꔛ Set the BGM device and album in in Option-Set Photo View. menu (Refer to p. 107).
ꔛ You can adjust Option by using the Q.MENU button on the remote control.
► ꘤ (Rotate) : Rotate photos.
ꔛ Rotates the photo 90°, 180°, 270°, 360° clockwise.
ꔛ Photos cannot be rotated if its width is greater than the available supported resolution height.
► ꕲ/ꕳ: View the photo in full mode or original mode.
► ꕊ (Energy Saving): Increase the brightness of your screen by using ENERGY SAVING button.
► Option : Set values for Slide Speed and BGM (Refer to p.107).
ꔛ You cannot change BGM while BGM is playing.
ꔛ You can only select the MP3 folder saved on the device that currently displays the photo.
► Hide : Hide the menu on the full-sized screen.
ꔛ To see the menu again on the full-sized screen, press ENTER button to display.
► Exit : Move to the previous menu screen.
106
Using the Photo List Function
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Choose options.
Set Photo View.
◀
▶
Set Video.
Set Audio.
Set 3D video.
◀
Slideshow ꘡
BGM ꘡
꘤
2/13
ꕲ
ꕊ
Close
▶
꘩ Option
ꕉ Hide
ꕯ Exit
For 42/47LX6500
Show the Option menu.
Q.MENU
2
ENTER
Select Set Photo View, Set Video,
Set Audio or Set 3D video.
MY MEDIA
1
Set Photo View Menu Options
Set Photo View.
Slide Speed
◀
BGM
Fast
▶
Drive1
• Repeat
◀
On
▶
• Random
◀
Off
▶
ꕉ Previous
1
2
Select Slide Speed or BGM.
Make appropriate adjustments.
107
MY MEDIA
* Image shown may differ from your TV.
Set Video Menu Options
For LED LCD TV/LCD TV
For Plasma TV
Set Video.
◀
Picture Mode
Set Video.
▶
Standard
• Backlight
70
◀
▶
Picture Mode
• Contrast
◀
100
◀
▶
• Contrast
100
◀
▶
• Brightness
50
◀
▶
• Brightness
50
◀
▶
• Color
60
◀
▶
• Sharpness
50
◀
▶
▶
• Color
60
◀
0
◀ R
G
▶
0
◀ W
C
▶
◀
• Dynamic Contrast
Medium
• Edge Enhancer
◀
High
▶
• Tint
• Noise Reduction
◀
Medium
▶
• Color Temp.
◀
Low
▶
• Noise Reduction
TruMotion
ꔅ Picture Reset
MY MEDIA
1
ENTER
BLUE
▶
◀
ꔅ Picture Reset
ꕉ Previous
Low
▶
ꕉ Previous
Make appropriate adjustments.
Then, select Previous.
Reset picture settings to default.
Set Audio Menu Options
Set 3D video Menu Options
(For 42/47LX6500)
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
▶
ꕉ Previous
ꔉ Enter
ꔅ Setting Left/Right
3D
1
ENTER
108
▶
Standard
Make appropriate adjustments.
Then, select Previous.
End 3D Video
For more information, see the 3D Imaging section in the Owner's Manual.
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this TV.
The On Screen Display below may be different from your TV. Images are an example to assist with
the TV operation.
Supported Music File: *.MP3
Bit rate range: 32 Kbps - 320 Kbps
• Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
Screen Components
1
MENU
Select MY MEDIA.
2
ENTER
Select Music List.
ENTER
2
1
3
4
5
6
3
Page 1/1
Music List
Drive1
USB 1 XTICK
1
001.mp3
00:00
002.mp3
00:00
Page 1/1
003.mp3
00:00
004.mp3
00:00
5
005.mp3
00:00
ꔂ Move
ꔅ Change Device
6
MY MEDIA
2
Preview: If any album jacket for
the file (Album Art Image)
exists, this picture is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 2
Current page/total pages of
contents
ꔅ To Movie List
ꔅ Change Numbers
ꔉ Play
ꘃ Page Change
ꔅ Mark Mode
ꘁ Mark
ꕯ Exit
4
Abnormal files are
displayed using this
graphic.
Non-supported files
are displayed using
this graphic.
RED
Change device.
GREEN
Move to Movie List or Photo List.
YELLOW
Change Numbers: Changes the number or thumbnails displayed at a time.
BLUE
Allows you to mark certain files.
EXIT
Return to TV viewing.
ENERGY
SAVING
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen (Refer to p.130). (For LED LCD TV/LCD TV: It's available "ENERGY SAVING
- Off, Screen Off" only.)
109
MY MEDIA
Music Selection
1
Page 1/1
Music List
Drive1
USB 1 XTICK
001.mp3
00:00
002.mp3
00:00
003.mp3
00:00
2
004.mp3
00:00
005.mp3
00:00
3
ꔂ Move
ꔅ Change Device
ꔅ To Movie List
ꔅ Change Numbers
Select the target folder or drive.
Page 1/1
ꔉ Play
ꘃ Page Change
ꔅ Mark Mode
ꘁ Mark
ꕯ Exit
ꔛ
ENTER
ENTER
Select the desired
music file.
Music files are played.
Use the CH (ꕌꕍ) button to navigate
in the music page.
MY MEDIA
Mark Mode
Page 1/1
1
Music List
Mark Mode
Drive1
USB 1 XTICK
001.mp3
00:00
002.mp3
00:00
Select the target folder or
drive.
Page 1/1
003.mp3
00:00
2
004.mp3
00:00
005.mp3
00:00
3
ENTER
Select the desired
music file.
MARK
FAV
Mark your desired music file.
CHAR/NUM
ꔂ Move
ꔅ Play Marked
RED
ꔅ Unmark All
ꘃ Page Change
ꔅ Exit Mark Mode
ꘁ Mark
Play Marked: Play the selected songs. Once a
song finishes playing, the next selected one
will be played automatically.
Mark All: Mark all songs in the folder.
YELLOW
Unmark All: Deselect all marked song.
Enter or exit the Mark Mode.
4
ꕯ Exit
GREEN
BLUE
110
ꔅ Mark All
ꔉ Mark
ꔛ
RED
Play the marked music file.
When one or more music files are
marked, the marked music files will
be played in sequence.
Using the Music List Function
Page 1/1
Music List
3 file(s) Marked
Drive1
Choose options.
Page 1/1
Set Audio Play.
ꕖ
ꔑ
001.mp3
00:00
002.mp3
00:00
ꕖ
005. - Mad (Feat).mp3
ꕗ
1
Q.MENU
ꕖ
ꕘ
ꕚ
ꕙ
003. mp3
00:00
004.mp3
00:00
ꔊꔋ
ꔅ Play with Photo
Set Audio.
ꔑ
ꔑ
005. mp3
00:00
02:30 / 03:25
ꕊ
꘩ Option
ꕉ Hide
Show the Option menu.
Select Set Audio Play or Set Audio.
ꕯExit
! NOTE
► You can listen to the music only within
the device currently played.
MY MEDIA
2
ENTER
Close
Using the remote control
Stop the song.
Return to normal playback.
Paused the song.
Select the previous or next song.
GREEN
ENERGY
SAVING
Play with Photo: Start playing the selected songs and then move to the Photo List.
Press the ENERGY SAVING button repeatedly to increase the brightness of your screen
(Refer to p. 130).
(For LED LCD TV/LCD TV: It's available "ENERGY SAVING - Off, Screen Off" only.)
A cursor indicating the position can be played.
EXIT
Move to the previous menu screen.
111
MY MEDIA
Set Audio Play Menu Options
Set Audio Play.
Repeat
◀
On
▶
Random
◀
Off
▶
ꕉ Previous
1
2
Select Repeat or Random.
MY MEDIA
Make appropriate adjustments.
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
Balance
0 ◀ L
R
▶
ꕉ Previous
1
2
112
Select Sound Mode, Auto Volume, Clear
Voice II or Balance.
Make appropriate adjustments.
ꔛ
If you don't press any buttons for a while, the play information box
will float across the screen. This prevents screen pixel damage due
to a fixed image remaining on the screen for a extended period of
time.
002. Velvete Goldmine.mp3
ꕖ 00:31 / 04:04
! NOTE
MY MEDIA
► A damaged or corrupted music does not play but displays 00:00 in playtime.
► Music files with copy-protection will not play.
► Press ENTER or ꕗ button to stop the screen saver.
113
MY MEDIA
DIVX REGISTRATION CODE
Using the registration number, movies can be rented or purchased at www.divx.com/vod.
Only DivX files matched with the registration code of the purchased TV are playable.
Movie List
1
MY MEDIA
ENTER
3
Photo List
Music List
ꕉ Previous
Close
i
Select MY MEDIA.
MENU
2
Deactivation
You must register your device to
play DivX protected videos.
Registration code : xxxxxxxxxx
Register at http://vod.divx.com
DivX Reg.Code
MY MEDIA
BLUE
Select DivX Option.
Select DivX Reg. Code.
4
ENTER
Display Divx Reg. Code.
! NOTE
► When loading, some buttons may not work.
► If you use the DivX registration code of another device, the rented or purchased DivX file cannot
be played. Therefore always use the DivX registration code assigned to this product.
► The video or audio of a file converted based on a standard other than the DivX codec standard
may be corrupted or unable to be played.
► The DRM/*.tp/*.trp file in DLNA server is not played when Movie List is in operation.
114
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web server and are blocked from activating more devices. DivX VOD
allows the consumer to activate up to 6 devices under one account.
Delete the existing authentication information to receive a new DivX user authentication for TV. Once
this function is executed, a DivX user authentication is required again to see DivX DRM files.
DivX Reg.Code
MY MEDIA
Deactivation
Movie List
Select MY MEDIA.
MENU
2
ENTER
3
4
Music List
BLUE
ꕉ Previous
Deregistration code:
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
MY MEDIA
1
Photo List
i
Select DivX Option.
Select Deactivation.
ENTER
5
ENTER
Select Yes.
Display Deactivation.
115
NETWORK
NETWORK
LEGAL NOTICE
Legal Notice
NETWORK
ꔂ Move
• Network Setting
: Wired
• Network Status
: Internet is connected
• Legal Notice
01/03 page
ꔉ Enter
ꔀ
ꔉ
IMPORTANT NOTICE RELATING TO NETWORK SERVICE
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content
and services are provided solely for your personal noncommercial use. You may not use any
content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable
content owner or service provider, you may not copy, upload, post, transmit, translate, sell,
modify, create derivative works, or distribute in any manner or medium any content or services displayed through this device.YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE
DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND
SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE
ꔍ
Close
1
NETWORK
2
3
MENU
Select NETWORK.
ENTER
Select Legal Notice.
ENTER
Check Legal notice.
4
EXIT
116
Return to TV viewing.
IMPORTANT NOTICE RELATING TO NETWORK SERVICE
All content and services accessible through this device belong
to third parties and are protected by copyright, patent, trademark
and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use.
You may not use any content or services in a manner that has
not been authorized by the content owner or service provider.
Without limiting the foregoing, unless expressly authorized by
the applicable content owner or service provider, you may not
copy, upload, post, transmit, translate, sell, modify, create derivative works, or distribute in any manner or medium any content
or services displayed through this device.
Third party services may be changed, suspended, removed,
terminated or interrupted, or access may be disabled at any
time, without notice, and LG makes no representation or warranty that any content or service will remain available for any
period of time. Content and services are transmitted by third
parties by means of networks and transmission facilities over
which LG has no control. LG may impose limits on the use of or
access to certain services or content, in any case and without
notice or liability. LG expressly disclaims any responsibility or
liability for any change, interruption, disabling, removal of or
suspension of any content or service made available through
this device.
LG is neither responsible nor liable for customer service related
to the content and services. Any question or request for service
relating to the content or services should be made directly to the
respective content and service providers.
NETWORK
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE
DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES
ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO ANY CONTENT AND SERVICES, EITHER
EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY RIGHTS. LG DOES
NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS,
LEGALITY, OR COMPLETENESS OF ANY CONTENT OR
SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND
DOES NOT WARRANT THAT THE DEVICE OR SERVICES WILL
MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE
DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERRORFREE. UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL LG BE LIABLE, WHETHER IN CONTRACT
OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES
ARISING OUT OF, ANY INFORMATION CONTAINED IN, OR
ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY
THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
117
NETCAST
NETCAST
NETCAST MENU
These services are provided by separate Content Provider.
Please visit the content providers web site for specific information on their services. (But, some content
manual maybe not provide depending on Content Provider).
NETCAST menu source can differ by country.
i.e)
1
Select NETCAST menu option.
ꔛ
2
ENTER
To select Weather of area, press the
RED button.
Enjoy Online Service.
NETCAST
! NOTE
► The videos list searched from the TV may different with the list searched from a web browser on
PC.
► The settings of this TV do not affect the video playback quality.
► To view the owner’s manual that provided by the Content Provider, visit our website at http://www.
lg.com.
►For service that requires log in, join the applicable service on the website using the PC and log in
through the TV to enjoy various additional functionalities.
►When you set the city you want with Setup by pressing the red button, the background of NetCast
will be set to the weather of the selected city.
►For Plasma TV: If there is no user action 2 minutes following freezing image or video on screen,
the screensaver will activate itself preventing fixed image remaining on screen.
118
WEATHER INFORMATION
Weather information is the program to view the weather of the city the user wants.
Screen Components
1
2
Weather info menu
Weather list by city
1
2
RED
Change between Celsius and Fahrenheit.
Move the focus to the menu you want.
Select the focused menu.
Return to Netcast menu.
EXIT
NETCAST
ENTER
Return to TV viewing.
Service menu
Home: The weather of selected city is displayed.
Favorite City: Frequently checked cities can be registered to check the weather.
NOTE
► By default, New York, London and Paris are registered and the user can add/delete cities from
Favorite City.
► LG is not responsible for the accuracy of the weather forecast.
► Applicable weather information can differ from the actual weather.
119
NETCAST
PHOTO ALBUM
Users can use or view the photos.
Screen Components
1
1
2
Photo Album menu
Photo list
2
Navigate the desired photos.
ENTER
The selected photo file is displayed.
NETCAST
Return to Netcast menu.
EXIT
Return to TV viewing.
Photo Album menu
Home: The featured photos list will be displayed.
Friends: You can register users with the pictures you want as friends. You can add up to 10 friends.
Search: The keypad/keyboard menu will be displayed.
My Photos: You can view the pictures uploaded to the Web. This function can only be used when you sign
in.
Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
120
VIDEO ONLINE
This is a video sharing website where users can upload, view, and share video clips.
Screen Components
1
2
Video menu
Videos list
1
2
RED
Set the option menu.
Return to Netcast menu.
EXIT
Return to TV viewing.
NETCAST
! NOTE
► When you press the Q.menu button while the video is playing in full mode, you can set the video
options.
► The playback of videos may be paused, stopped or buffering occurring often depending on your
broadband speed.
We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a
connection speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on
your ISP’s network conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you want to increase your connection speed. Many ISPs offer a variety of
broadband speed options.
121
NETCAST
Watching video menu
Home: You can watch the popular video in real time.
Featured: The featured videos list will be displayed.
Popular: The best rated videos list from Watching video server will be displayed.
Most Viewed: The most viewed videos list will be displayed.
Search: The keypad/keyboard menu will be displayed.
History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
Favorites: In sign-in status, this menu will be displayed the videos list that is arranged in the Watching
video server with your account (Some videos may not appear on the Favorites list, even if the videos are
arranged in the server).
Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
Using the remote control
Stops the video and displays related videos list.
Pause the video while it is playing.
NETCAST
Play the selected video.
Skip the playback forward or backward.
RED
Set the option menu.
Return to Netcast menu.
EXIT
122
Return to TV viewing.
EMOL
You can use a various emol contents.
Screen Components
1
2
emol menu
Title article display
1
2
Navigate the desired article.
The selected article is displayed.
NETCAST
ENTER
Return to Netcast menu.
EXIT
Return to TV viewing.
ꔛ
If you want to more information, visit
www.emol.com
123
NETCAST
BAZUCA
You can watch movies from bazuca streamed over the internet to your TV.
Screen Components
1
2
bazuca menu
Movie poster
1
2
Navigate the desired video.
ENTER
NETCAST
124
The selected video is displayed.
Return to Netcast menu.
EXIT
Return to TV viewing.
TERRA TV
You can use a various terratv contents.
Screen Components
1
2
1
terratv menu
Videos list
2
Navigate the desired video.
ENTER
The selected video is displayed.
EXIT
Return to TV viewing.
ꔛ
NETCAST
Return to Netcast menu.
If you want to more information, visit
http://terratv.terra.com.
125
PICTURE
PICTURECONTROL
CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux).
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
PICTURE
ꔉ
ꔡ
• Picture Wizard
ꔂ Move
ꔉ Enter
: 16:9
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
• Aspect Ratio
• ꕊ Energy Saving : Off
: Standard
• Picture Mode
ꔑ 16:9
: Standard
• Backlight
70
• Backlight
70
• Contrast
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sh
Sharpnes
pness
70
• Sh
Sharpnes
pness
70
ꔑ 16:9
ꔉ
ꔡ
□ Just Scan
or
ꔉ
ꔡ
□ Just Scan
□ Set By Program
□ Original
□ 4:3
□ Full Wide
□ Zoom
□ 4:3
□ Cinema Zoom1
□ 14:9
□ Zoom
□ Cinema Zoom 1
1
2
MENU
Select PICTURE.
ENTER
Select Aspect Ratio.
ENTER
Select the desired picture format.
ꔛ
ꔛ
You can also adjust Aspect Ratio in
the Q.MENU.
Press the RATIO button repeatedly to
select the desired picture format.
3
PICTURE CONTROL
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
When adjusting Zoom or Cinema Zoom in Q.MENU
1
Q.MENU
2
Select Aspect Ratio.
ENTER
Select Zoom or Cinema
Zoom.
ENTER
Adjust proportion of Zoom or
Cinema Zoom. The Cinema
Zoom adjustment range is
1-16.
3
4
ENTER
126
Move the image on the screen.
Cinema Zoom1
Zoom
ꔀ Move ꔁ Zoom
ꔉ Enter
ꔀ Move ꔁ Zoom
ꔉ Enter
16:9
14:9
Adjust the picture horizontally, in a linear
proportion to fill the entire screen.
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
Just Scan
Normally the edges of video signals are
cropped 1-2%. Just Scan turns off this
cropping and shows the complete video.
Notes: If there is noise on the edges of the
original signal, it will be visible when Just Scan
is activated.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Just Scan
Original
When your TV receives a wide screen signal it will
automatically change to the picture format broadcast.
Full Wide
When TV receives the wide screen signal,it will lead
you to adjust the picture horizontally or vertically, in a
linear proportion,to fill the entire screen fully. 4:3 and
14:9 video is supported in full screen without any
video distortion through DTV input
Full Wide
Cinema Zoom 1
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
This enlarges an image with cinemascope
aspect ratio (2.35:1) without distortion.
Note: When enlarging or reducing the picture, the image may become distorted.
PICTURE CONTROL
Original
Zoom
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will
be cropped.
Set By Program
Selects the proper picture proportion to
match the source’s image.
(16:9
16:9)
(4:3 4:3)
Set By Program Set By Program
127
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate
the screen quality by easily following each step.
When you adjust the image to Low, Recommended or High, you can see the example of the changes
you made.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
Black Level
Set the screen above identical to the Recommended sample
below.
: 16:9
ꔀ
• Picture Wizard
ꔉ
• ꕊ Energy Saving : Off
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
Low
Recommended
• Brightness
High
50 ◀
▶
ꕉ Previous
1
Select PICTURE.
MENU
2
ENTER
ENTER
5
ꔉ Next
ENTER
Adjust Black Level.
Select Picture
Wizard.
White Level
Set the screen above identical to the Recommended sample
below.
Picture Wizard
With Picture Wizard, you can adjust the picture quality of the
original image.
ꕖ
PICTURE CONTROL
ꕉ Previous
3
ENTER
90 ◀
High
▶
6
ꔉ Next
ENTER
Adjust White Level.
Tint
Picture Wizard
Set the screen above identical to the Recommended sample
below.
Standard
• Standard/Preferred
4
ꔛ
Low
Preferred
ENTER
Adjust Standard/
Preferred.
If you select Preferred, OSD (On Screen
Display) differ from that shown in this manual.
Recommended
• Tint
◀ Standard ▶
0
◀
High
R
ꕉ Previous
ꔉ Next
ꕉ Previous
128
Recommended
ꕉ Previous
ꔉ Next
Adjust Picture Wizard.
Low
• Contrast
7
G
▶
ꔉ Next
ENTER
Adjust Tint.
For LED LCD TV/LCD TV
Color
Backlight
Set the screen above identical to the Recommended sample
below.
Low
Recommended
• Color
50 ◀
ꕉ Previous
Set the Backlight to your Brightness preference.
High
Dark
• Backlight
▶
ꔉ Next
Recommended
30 ◀
ENTER
▶
ꕉ Previous
ꔉ Next
11
8
Bright
Adjust Color.
ENTER
Adjust Backlight.
i.e)
Complete
Horizontal Sharpness
Set the screen above identical to the Recommended sample
below.
ꔀ Move
ꘁ Mark
Select (an) input(s) to apply the settings.
ꔑ TV
□ AV1
□ AV2
□ Component1
Low
Recommended
• H Sharpness
50 ◀
ꕉ Previous
High
□ Component2
□ Component3
▶
□ RGB-PC
ꔑ HDMI1
ꔉ Next
ꔑ HDMI2
ꔑ HDMI3
9
ENTER
Adjust Horizontal
Sharpness.
ꔑ HDMI4
Warning: The picture quality may vary according to the different types of
signal and inputs.
Set the screen above identical to the Recommended sample
below.
12
ꔉ Confirm
MARK
FAV
CHAR/NUM
Low
Recommended
• V Sharpness
50 ◀
High
13
Select input source to
apply the settings.
i
ENTER
Save.
The current adjustment value is
saved to Expert1.
▶
Close
ꕉ Previous
PICTURE CONTROL
ꕉ Previous
Vertical Sharpness
ꔉ Next
14
10
ENTER
Adjust Vertical
Sharpness.
ꔛ
ꔛ
ꔛ
ENTER
Finish the Picture Wizard.
If you stop the setting before the final step,
the changes will not be saved to the TV.
Once the Picture Wizard sets the picture
quality, Energy Saving is changed to Off
automatically.
To reset changes made by Picture Wizard,
operate Picture Reset when Picture Mode
is on Expert1.
129
PICTURE CONTROL
ꕊ ENERGY SAVING
It reduces the TV’s power consumption.
You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the
Picture Mode.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
• Aspect Ratio
• Picture Wizard
ꔂ Move
: 16:9
ꔉ
ꔀ
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
Sharpnes
Shar
p s
pnes
70
• ꕊ Energy Saving : Off
□ Auto
• Picture Mode
: Standard
ꔑ Off
ꔉ
ꔀ
• Backlight
□ Minimum
• Contrast
□ Medium
• Brightness
□ Maximum
• Sh
Sharpnes
Shar
p s
pnes
□ Screen Off
LED LCD TV,
LCD TV
1
MENU
2
3
Select PICTURE.
PICTURE CONTROL
ENTER
Select ꕊ Energy Saving.
ENTER
Select your desired menu option.
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
130
ꔉ Enter
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
PICTURE
□ Intelligent Sensor
70
90
50
70
ꔑ Off
□ Minimum
□ Medium
□ Maximum
□ Screen Off
Plasma TV
When selecting Screen off, the
screen will turn off after 3 seconds.
Pressing any button of the remote
controller will turn on the screen
again.
If you adjust “Energy Saving-Auto,
Maximum”, Backlight option will not
work (For LED LCD TV/LCD TV).
When selecting “Energy Saving Off, Minimum, or Medium, you can
adjust Backlight feature
When selecting Auto, Backlight is
automatically adjusted through
Intelligent Sensor according to the
surrounding conditions (For LED LCD
TV/LCD TV).
When selecting Off, Energy Saving is
not used.
Press the ENERGY SAVING button
repeatedly to select the appropriate
Energy Saving.
PRESET PICTURE SETTINGS (PICTURE MODE)
There are factory presets for picture settings available in the user menus. You can use a preset,
change each setting manually, or use the Intelligent Sensor.
PICTURE
• Aspect Ratio
ꔂ Move
PICTURE
ꔉ Enter
: 16:9
• Aspect Ratio
: 16:9
□ Intelligent
Sensor
• Picture
Wizard
• Picture Wizard
□ VividSaving : Off
• ꕊ Energy
ꔉ
ꔑ Standard
ꔀ
• Picture
Mode
: Standard
□ Cinema
• Backlight
• ꕊ Energy Saving : Off
• Picture Mode
ꔂ Move
ꔉ
ꔀ
: Standard
• Backlight
70
• Contrast
100
□ Sport
• Brightness
50
□ Game
• Sh
Sharpnes
Shar
p s
pnes
70
• Contrast
• Brightness
□ ꕋ Expert1• Sh
Sharpnes
Shar
p s
pnes
□ ꕋ Expert2
LED LCD TV,
LCD TV
1
2
3
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select your desired options.
Vivid, Standard, Cinema, Sport, and Game
Settings are preset for the optimum picture
quality at the factory.
Vivid: This is the mode to maximize the effect
of the video in the retail store. Strengthen the
contrast, brightness, color and sharpness for
vivid picture.
Standard: This is the mode to realize optimum
viewing condition for the general user.
ꕭ (Auto Power Saving): This is the mode to
maximize reducing the power consumption
without hurting the picture quality. This features is available only on Plasma TV.
Cinema: This mode optimizes video for watching movies.
ꔧ Cinema: This is cinema quality mode to
provide you the experience of watching a movie
at home.
When selecting ꔧ Cinema, Aspect ratio
changes to Just scan.
ꔧ Bright Room: This is the specification to
optimize TV viewing in Bright Room.
When selecting ꔧ Bright Room, Aspect ratio
changes to Just scan.
ꔛ
ꔛ
ꔛ
4
□ Vivid
ꔑ Standard
50 □ Sport
70 □ Game
□ ꕋ Expert1
□ ꕋ Expert2
Plasma TV
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔀ
ꔉ
□ꕭ ꔉ
70 □ ꔧ Cinema
100 □ ꔧ Bright Room
Sport: This is the video mode to emphasize
dynamic video and primary color (e.g, white,
uniform, grass, sky blue etc.) by realizing the
optimal screen for sports.
Game: This is the mode to realize fast response
speed in a fast gaming screen.
ꕋExpert: This is the mode to adjust the video
in detail for video quality expert and general
user.
You can also adjust Picture Mode in the
Q.MENU.
When selecting Intelligent Sensor, Energy
Saving is changed to Auto automatically (For
LED LCD TV/LCD TV).
When selecting Intelligent Sensor, it changes
Backlight, contrast, brightness, sharpness, color
and tint automatically (For LED LCD TV/LCD
TV).
Intelligent Sensor: The most suitable picture is
automatically adjusted according to the surrounding conditions.
When selecting Intelligent Sensor, Energy Saving is changed to Auto automatically.
When selecting Intelligent Sensor, it is changed Backlight, contrast, brightness, sharpness, color,
color Temp. and tint automatically.
Intelligent Sensor: The most suitable picture is automatically adjusted according to the surrounding conditions.
PICTURE CONTROL
ꔛ
MENU
ꔉ Enter
131
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT - USER MODE
Adjust the picture appearance to suit your preference and viewing situations.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
• Col
C
Color
lor Temp
Temp
p.
• Picture Wizard
• Picture Mode
1
2
3
4
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sh
S ap
Shar
pnes
ess
700
• Co
C ntra
t stt
ꔉ
ꔀ
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select your desired options.
ENTER
Select Backlight, Contrast, Brightness,
Sharpness, Color, Tint, Color Temp., or
Advanced Control.
ꔛ
PICTURE CONTROL
5
6
BACK
Make appropriate adjustments.
ꔛ
Return to the previous menu.
ꔛ
EXIT
Return to TV viewing.
ꔛ
ꔛ
ꔛ
ꔛ
132
0
70 ◀
ꔡ
W
C
▶
100
ꔉ Enter
ꔛ
MENU
ENTER
ꔠ
• Backlight
• ꕊ Energy Saving : Off
Backlight (For LED LCD TV/LCD TV):
This function adjusts the brightness
of LCD panel, to control the brightness of the screen. Adjusting the
backlight is recommended when setting the brightness of the set. When
decreasing the backlight, the brightness of the black becomes darker
without any loss in video signal and
the power consumption is reduced.
Backlight can only be adjusted in "
Energy Saving - Off, Minimum, or
Medium".
Contrast: Increase or decrease the
gradient of the video signal. You may
use Contrast when the bright part of
the picture is saturated.
Brightness: Adjusts the base level of
the signal in the picture. You may use
Brightness when the dark part of the
picture is saturated.
Sharpness: Adjusts the level of crispness in the edges between the light
and dark areas of the picture. The
lower the level, the softer the image.
Color: Adjusts intensity of all colors.
Tint: Adjusts the balance between
red and green levels.
Color Temp.: Set to warm to enhance
hotter colors such as red, or set to
cool to enhance cooler colors such
as blue.
PICTURE IMPROVEMENT TECHNOLOGY
(ADVANCED CONTORL)
Advanced Control allows you to adjust some of the advanced features of your LG display.
To reset to the factory default after making adjustments to each input source, execute the Picture
Reset function for each Picture Mode.
PICTURE
ꔂ Move
ꔉ Enter
• Colo
C l r
60
• Tint
0
R
G
• Color Temp.
0
W
C
PICTURE
ꔂ Move
• Colo
C l r
60
Dynamic Contrast
• Tint
0
Dynamic
• ColorColor
Temp. 0
R
◀
ꔉ Enter
Low
G
▶
Dynamic Contrast
Off C
Dynamic Color
Off
Noise Reduction
• Screen (RGB-PC)
• Advanced
Control
Clear
White
• Picture Reset
Skin Color
• TruMotion
: Low
Noise Reduction
• Screen (RGB-PC)
Off
Black Level
• LED Local Dimming : On
• LED Local Dimming
Digital: On
Noise Reduction
Off
Film Mode
• Advanced Control
ꔉ
ꔀ
• Picture Reset
• TruMotion
: Low
W
Gamma
0
Medium
◀
Off
Gamma
Medium
Low
Off
Color Gamut
Wide
Low
ꔍ
Eye Care
Low
Close
ꔍ
▶
Off
Black Level
Close
Low
Plasma TV
LED LCD TV,
LCD TV
1
3
Select PICTURE.
ENTER
Select Advanced Control.
ENTER
Select your desired options.
4
Make appropriate adjustments.
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PICTURE CONTROL
2
MENU
133
PICTURE CONTROL
EXPERT PICTURE CONTROL
ꕋ Expert1 and ꕋ Expert2 provide even more advanced picture settings for users. Typical used by
professionals for calibrating the TV.
PICTURE
• Aspect Ratio
ꔂ Move
PICTURE
ꔉ Enter
: 16:9
Dynamic Contrast
• Picture Wizard
Noise Reduction
• ꕊ Energy Saving : Off
• Picture Mode
: ꕋExpert1
• Backlight
70
• Contrast
90
• Brightness
50
• H Sharpn
Sharpn
p ess 70
□ Intelligent Sensor
ꔉ
□ Vivid
Digital Noise Reduction
□ Cinema
□ Sport
□ Game
ꔉ
ꔀ
□ ꕋ Expert2
Dynamic Contrast
Off
• Expert Control
Gamma
2
PICTURE CONTROL
3
4
5
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select ꕋ Expert1 or ꕋ Expert2.
ENTER
Select Expert Control.
ENTER
Select your desired menu option.
6
Make appropriate adjustments.
7
134
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Off
Off
C
Medium
Black Level
Low
Film Mode
On
Color Gamut
Wide
High
Edge Enhancer
High
xvYcc
Auto
xvYcc
Auto
Off
Expert Pattern
Off
ꔍ
ꔍ
Close
Close
LED LCD TV,
LCD TV
MENU
◀
G
Noise Reduction
Edge Enhancer
Expert Pattern
1
ꔉ Enter
• V Sharpn
Sharpn
p ess 70
◀
Off
▶
• Color
70 R
Off
• Tint
70 W
• Picture Reset
Black Level
Low
• TruMotion
Real Cinema
On
• Screen (RGB-PC)
Color
Gamut
Wide
• LED Local Dimming : On
□ Standard
ꔑ ꕋ Expert1
ꔂ Move
Plasma TV
▶
*This feature is not available for all models.
ꔛ
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The picture is improved by making bright parts brighter and
dark parts darker.
ꔛ
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and
white look more vivid.
Clear White
ꔛ
Make the white area of screen brighter and more white.
Skin Color
ꔛ
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
ꔛ
Reduces screen noise without compromising video quality.
Digital Noise
Reduction
ꔛ
Removes noise caused by compressing video.
Dynamic Contrast
Dynamic Color
ꔛ
Gamma
You can adjust brightness of dark areas and middle gray level areas of the
picture.
Low : Make brighter and middle gray level areas of the picture brighter.
Medium : Express original picture levels.
High: Make dark and middle gray level areas of the picture darker.
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
ꔛ Set black level of the screen to proper level.
ꔛ This function is available in the following modes: AV (NTSC-M), HDMI or
Component.
ꔛ
Eye Care
ꔛ
ꔛ
Real Cinema
ꔛ
Makes video clips recorded in film look more natural by eliminating judder
effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps). With
LG Real Cinema, every frame is consistently processed 5 times in 1/24 of
a second producing 120 fps with TruMotion or 2 times in 1/24 of a second
producing 48 fps without TruMotion, thus totally eliminating the judder
effect.
This function can also work when TruMotion is off.
PICTURE CONTROL
ꔛ
Adjust the brightness of the screen to prevent the screen from being too
bright. Dims extremely bright pictures.
This feature is enabled in “Picture Mode-Standard, Sports, Game”.
LED LCD TV/LCD TV: Advanced Control
Plasma TV: Advanced Control, Expert Control
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
ꔛ Maximize the utilization of color to increase color quality.
Color Gamut
LED LCD TV/LCD TV: Expert Control
Displays color domain of the signal.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
EBU: Mode to display EBU standard color area.
SMPTE: Mode to display SMPTE standard color area.
BT709: Mode to display BT709 standard color area.
ꔛ
135
PICTURE CONTROL
ꔛ
Edge Enhancer
ꔛ
ꔛ
xvYCC
ꔛ
ꔛ
ꔛ
Color Filter
ꔛ
ꔛ
Expert Pattern
ꔛ
Show clearer and distinctive yet natural edges in the video.
This function is enabled in "Picture mode - Expert".
This is the function to express richer color.
This feature represents rich color as much as conventional video signal.
This function is enabled in "Picture mode - Cinema / ꔧ Cinema / ꔧ
Bright Room, ꕋ Expert" when a xvYCC signal is inputted through HDMI.
This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
This function is enabled in "Picture mode - Expert".
This is a pattern used for expert adjustment.
This function is enabled in "Picture mode - Expert" when you watch DTV.
(For 32/42/47/55LE5500-DA, 42LE5550-DA, 42/47LE8500-DA,
32/42/47/55LD650-DA, 42/47LX6500-DD)
ꔛ
Color Temperature
PICTURE CONTROL
Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
c. Method : 10 Point IRE (LED LCD TV, LCD TV)
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
- Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, then the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
c-2. Method : 20 Point IRE (Plasma TV)
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 0, 5, 10, 15 - 100. You can adjust Red, Green
or Blue according to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
ꔛ
Color Management
System
136
A tool used by the experts to make adjustments by using the test patterns,
this does not affect other colors but can be used to selectively adjust the
6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is
-30 - +30.
- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30
- +30.
- This feature is disabled in RGB-PC and HDMI-PC mode.
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
ꔂ Move
ꔉ Enter
• Colo
C lo r
Co
60
• Tint
0
R
G
• Color Temp.
0
W
C
PICTURE
i
• Advanced Control
? All picture settings will be reset.
• Picture
Reset
ꔉ
ꔀ
Continue?
• TruMotion
: Low
• Screen (RGB-PC)
• LED Local Dimming : On
1
2
3
Yes
MENU
Select PICTURE.
ENTER
Select Picture Reset.
ENTER
Select Yes.
ENTER
EXIT
Initialize the adjusted value.
Return to TV viewing.
60
• Tint
0
R
• Color Temp. 0 W
Resetting video configuration...
• Advanced Control
G
C
• Picture Reset
• TruMotion
No
• Colo
C lo r
Co
P
ꔉ Enter
: Low
• Screen (RGB-PC)
• LED Local Dimming : On
PICTURE CONTROL
4
ꔂ Move
137
PICTURE CONTROL
TRUMOTION- For LED LCD TV, LCD TV
Advance panel provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture.
PICTURE
ꔂ Move
• Colo
C l r
ꔉ Enter
60
TruMotion
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
◀
• Judder
3
• Blur
3
• Picture Reset
• TruMotion
: Low
Low
▶
ꔉ Enter
ꔉ
ꔀ
• Screen (RGB-PC)
• LED Local Dimming : On
1
MENU
2
ENTER
Select PICTURE.
ꔛ
ꔛ
Select TruMotion.
ꔛ
3
ENTER
Select Low, High, User, or Off.
ꔛ
ꔛ
ꔛ
PICTURE CONTROL
138
Adjustment for TruMotion (Judder
and Blur) with selecting User
4
ENTER
5
Select Judder or Blur.
Make appropriate adjustments.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
ꔛ
Off: Turn off TruMotion operation.
Low: Provides smooth picture movement. Use this setting for standard
use.
High: Provides smoother picture
movement.
Judder: Adjusts noise of the screen.
Blur: Adjusts after-image of the screen.
TruMotion works with all inputs except
PC mode.
If you enable "TruMotion", noise may
appear on the screen. If this occurs,
set "TruMotion" to "Off".
If you select "Picture Mode-Game"
set "TruMotion" to "Off".
LED LOCAL DIMMING
- For 42/47/55LE5500, 42LE5550, 42/47/55LE7500, 42/47LE8500, 42/47LX6500
After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve
the contrast ratio. This feature is disabled in “Picture Mode-Game”.
PICTURE
ꔂ Move
• Colo
C l r
PICTURE
ꔉ Enter
60
ꔉ Enter
60
• Tint
0
R
G
• Tint
0
R
G
• Color Temp.
0
W
C
• Color Temp.
0
W
C
• Advanced Control
• Advanced Control
• Picture Reset
• TruMotion
ꔂ Move
• Colo
C l r
• Picture Reset
: Low
• TruMotion
• Screen (RGB-PC)
: Low
• Screen (RGB-PC)
ꔠ
ꔉ
• LED Local Dimming : On
• LED Local Dimming : On
□ Off
ꔠ
ꔉ
ꔑ On
4
1
2
3
MENU
Select PICTURE.
BACK
Return to the previous menu.
ENTER
Select LED Local Dimming.
EXIT
Return to TV viewing.
ENTER
Select On or Off.
POWER INDICATOR - For LED LCD TV, LCD TV
Adjust the power/standby indicator light on the front of the TV.
OPTION
ꔂ Move
ꔉ Enter
• Caption
: Off
• Caption
ꔀ
ꔉ
• Power Indicator
• Initial Setting
1
2
• Initial Setting
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
ENTER
Select Power Indicator.
4
ꔉ Enter
ꔛ
Select Standby Light or Power Light.
◀
Power Light
• Set ID
MENU
ENTER
: Off
Standby Light
• Power Indicator
ꔛ
3
ꔂ Move
• Language
On
▶
On
Close
PICTURE CONTROL
• Language
OPTION
Standby Light: Determines whether
to set the indicator light on the front
of the TV to On or Off in standby
mode.
Power Light: Determines whether to
set the indicator light on the front of
the TV to On or Off when the power
turns on.
Select your desired options.
5
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
139
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD - For Plasma TV
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can
use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
OPTION
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
ꔉ
ꔀ
• ISM Method
• Initial Setting
: Off
ꔉ
ꔀ
• ISM Method
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
ꔑ Normal
□ Orbiter
□ Color Wash
□ White Wash
1
2
3
MENU
Select OPTION.
ENTER
Select ISM Method.
ENTER
4
EXIT
ꔛ
ꔛ
Select Normal, Orbiter, Color Wash,
or White Wash.
Return to TV viewing.
PICTURE CONTROL
ꔛ
ꔛ
Normal: If image sticking is never a
problem, ISM is not necessary - set
to Normal.
Orbiter: To avoid a ghost image on
the screen, the image will move every
2 minutes to help prevent ghost
images. However, it is best not to
allow any fixed image to remain on
the screen.
Color Wash: The color block with the
screen moved a little and the white
pattern are alternately displayed. It is
difficult to see the after image on all
colors.
Once it has been corrected it will not
be visible in any color.
White Wash: White Wash removes
ghost images from the screen. Use
sparingly. Watch the TV normally for
a while before using this feature to
see if the ghost image disappears on
its own.
! NOTE
►An excessive ghosted image may be
impossible to clear entirely with White
Wash. To return to normal viewing, press
the any button.
140
SOUND & LANGUAGE CONTROL
AUTO VOLUME
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatkc adjustments for each program.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
ꔉ
ꔡ
0
L
: Standard
2
3
ꔂ Move
• Auto Volume
: On
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
ꔑ On
0 L
• Infinite Sound : Off
• Treble
50
• Bass
50
• Bass
50
ENTER
Select Auto Volume.
ENTER
Select On or Off.
Return to the previous menu.
EXIT
Return to TV viewing.
• Rese
Reset
Reset
SOUND & LANGUAGE CONTROL
BACK
ꔠ
ꔉ
R
: Standard
50
Select AUDIO.
ꔉ Enter
□ Off
• Treble
MENU
4
R
AUDIO
• Infinite Sound : Off
• Rese
Reset
Reset
1
ꔉ Enter
141
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
ꔉ
ꔀ
• Balance
• Sound Mode
ꔉ Enter
0
L
R
: Standard
2
3
• Treble
50
50
• Bass
50
ENTER
Select On or Off.
SOUND & LANGUAGE CONTROL
Select Level.
Make appropriate adjustments.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
R
◀
ꕅ3
: Standard
• Bass
Select Clear Voice II.
ꔉ Enter
• Clear Voice II
L
0• Level
• Infinite Sound:Off
Adjustment for Clear Voice Level
with selecting On
142
• Balance
50
ENTER
6
: Off ꕅ 3
• Treble
Select AUDIO.
5
: Off
• Clear Voice II
• Infinite Sound : Off
MENU
4
ꔂ Move
• Auto Volume
• Sound Mode
• Rese
Reset
Reset
1
AUDIO
• Rese
Reset
Reset
Close
-
Off
▶
+
BALANCE
Adjust the left/right sound of speaker to suit your taste and room situations.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
0
ꔉ Enter
L
ꔀ
R ꔉ
: Standard
2
3
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
: Standard
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Select AUDIO.
ENTER
Select Balance.
ENTER
Make appropriate adjustments.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔉ Enter
• Balance
0 L
• Infinite Sound:Off
MENU
4
ꔂ Move
• Auto Volume
• Infinite Sound : Off
• Rese
Reset
Reset
1
AUDIO
R
ꔉ
0 ◀
L
R
▶
Close
• Rese
Reset
Reset
SOUND & LANGUAGE CONTROL
143
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment using factory presets.
AUDIO
ꔂ Move
ꔉ Enter
AUDIO
ꔂ Move
• Auto Volume
: Off
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
0
L
R
ꔉ
ꔀ
: Standard
• Balance
• Sound Mode
• Infinite Sound : Off
• Treble
50
• Bass
50
2
3
MENU
Select AUDIO.
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
4
SOUND & LANGUAGE CONTROL
144
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
• Rese
Reset
Reset
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
0 L
ꔑ Standard
□ Music
• Infinite Sound:Off
□ Cinema
• Treble
□50Sport
• Bass
• Rese
Reset
Reset
1
: Standard
ꔉ Enter
R
ꔉ
ꔡ
□50Game
Standard, Music, Cinema, Sport, and
Game are preset for optimum sound
quality at the factory.
You can also adjust Sound Mode in
the Q.MENU.
Standard: Offers standard-quality
sound.
Music: Optimizes sound for listening
to music.
Cinema: Optimizes sound for watching movies.
Sport: Optimizes sound for watching
sports events.
Game: Optimizes sound for playing
games.
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
• Sound Mode
0
ꔉ Enter
L
R
: Standard
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off ꕅ 3
• Balance
0
• Sound Mode
• Infinite Sound : Off
• Treble
50
• Bass
50
ꔉ
ꔉ
ꔀ
L
R
: Standard
• Infinite Sound
• Infinite Sound : Off
• Treble
• Bass
• Rese
Reset
Reset
ꔉ Enter
50 • Treble
50 • Bass
Off
50
◀
▶
50
• Rese
Reset
Reset
Close
1
MENU
Select AUDIO.
ꔛ
2
3
4
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
ENTER
ꔛ
Select Infinite Sound, Treble, or Bass.
ꔛ
5
ENTER
6
Make appropriate adjustments.
Return to the previous menu.
EXIT
Return to TV viewing.
SOUND & LANGUAGE CONTROL
BACK
If sound quality or volume is not at
the level you want, it is recommended
to use a separate home theater system or amp to cope with different
user environments.
If you select “Clear Voice II-On”, the
Infinite Sound feature will not operate.
Infinite Sound: Infinite Sound is a
patented LG technology that solves
the problem of playing 5.1 multichannel content over two speakers.
145
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
ꔂ Move
• Cl
Clear
ear Voic
V i e II
AUDIO
ꔉ Enter
:O
Off
ff ꕅ 3
• Balance
0
• Sound Mode
ꔂ Move
• Cl
Clear
ear Voic
V i e II
L
• Balance
R
: Standard
0
• Sound Mode
MENU
i Resetting audio configuration...
• Infinite Sound:Off
• Treble
• Treble
50
• Bass
50
• Reset
i
50
: On
• TV Speaker
ENTER
4
Select AUDIO.
Initialize the adjusted value.
5
Select Reset.
Return to TV viewing.
EXIT
3
ENTER
: On
or
Resetting sound mode
configuration...
No
ENTER
2
R
• Infinite Sound : Off
Yes
1
L
: Standard
All audio settings
will be resetted.
50
?• Bass
Continue?
ꔉ
• Reset
ꔀ
• TV Speaker
ꔉ Enter
:O
Off
ff ꕅ 3
Select Yes.
TV SPEAKERS ON/OFF SETUP
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
SOUND & LANGUAGE CONTROL
AUDIO
• Cl
Clear
earr Voic
V i e II
• Balance
• Sound Mode
• TV Speaker
1
MENU
2
ENTER
ENTER
AUDIO
ꔉ Enter
ꔂ Move
• Cl
Clear
earr Voic
V i e II
0
L
• Sound Mode
0
L
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Select AUDIO.
• Reset
ꔠ
ꔉ
• TV Speaker
4
: On
□ Off
ꔑ On
ꔠ
ꔉ
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Select TV Speaker.
Select On or Off.
R
: Standard
• Infinite Sound : Off
: On
ꔉ Enter
: Offf ꕅ 3
• Balance
R
: Standard
• Reset
3
146
ꔂ Move
: Offf ꕅ 3
DIGITAL AUDIO OUT (For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA, 42/47LX6500-DD)
This function is setting the Dolby digital/PCM to connect the audio outputs.
If you select “Digital Audio Out - Auto” when Dolby digital is available, SPDIF (Sony Philips Digital
InterFace) output will be Dolby Digital.
If you select “Digital Audio Out - Auto” when Dolby digital is not available, SPDIF output will be PCM
(Pulsecode modulation).
AUDIO
ꔂ Move
• Ba
B
Bal
alanc
lance
• Sound Mode
ꔉ Enter
0
: Standard
L
3
• Sound Mode
ENTER
: Standard
L
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
: On
ꔀ
ꔉ
R
• Reset
• Digital Audio Out : PCM
• TV Spe
Sp
peaker
k
Item
MENU
2
R
: On
□ Auto
ꔑ PCM
ꔠ
ꔉ
Audio Input
Digital Audio
output
Select AUDIO.
Select Digital Audio Out.
ꔉ Enter
0
• Infinite Sound : Off
• Digital Audio Out : PCM
1
ꔂ Move
• Ba
B
Bal
alanc
lance
• Reset
• TV Spe
Sp
peaker
k
AUDIO
MPEG
PCM
Auto
DD
DD
(Speaker On)
DD+
DD
PCM
ENTER
PCM
Auto
DD
DD
BACK
Return to the previous menu.
(Speaker Off)
DD+
DD
EXIT
Return to TV viewing.
DD
PCM
All
PCM
To set “SPDIF OUT - Dolby Digital” in DTV input
signal, select “Digital Audio Out - Auto” and “TV
Speaker - Off”.
SOUND & LANGUAGE CONTROL
4
MPEG
Select Auto or PCM.
147
SOUND & LANGUAGE CONTROL
STEREO/SAP BROADCAST SETUP
On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio
Program) that accompanies the stereo program if the station transmits an additional sound signal.
Mono sound is automatically used if the broadcast is only in Mono.
◀
SAP
▶
◀
Audio
▶
1
or
MONO ꔉ
Q.MENU
Select SAP or Audio.
ENTER
Select Mono, Stereo, or
SAP.
MONO ꔉ
2
A
3
Return to TV viewing.
EXIT
ꕉ Exit
ꕉ Exit
DTV AUDIO SETTING ( For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA, 42/47LX6500-DD)
When different audio types exist in an input signal, this function allows you to select the audio type
you want.
AUDIO
••S
Sound
undd Mod
M de
Mode
ꔂ Move
ꔉ Enter
: Sta
St ndar
St
ndard
d d
AUDIO
•• Sound
••S
undd Mod
M de
Mode
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
: On
• DTV Audio Setting : Auto
Auto
Auto
►
SOUND & LANGUAGE CONTROL
• TV Speaker
ꔉ
ꔀ
MUTE
Dolby Digital+
Dolby Digital
MPEG
1
MENU
2
3
ꔛ
ꔛ
148
• Digital Audio Out : PCM
: On
• DTV Audio Setting : Auto
ꔉ Enter
• Reset
• Digital Audio Out : PCM
• TV Speaker
ꔂ Move
: Sta
St ndar
St
ndard
d d
ENTER
ENTER
Select AUDIO.
Select DTV Audio Setting.
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Select Auto, Dolby Digital +,
Dolby Digital or MPEG.
Auto: Automatically outputs in the order Dolby Digital+ > Dolby Digital > MPEG.
Dolby Digital+, Dolby Digital, MPEG: Allows users to select the audio type they want.
ex) If MPEG is selected, MPEG is always outputted.
If MPEG is not supported, Dolby Digital are selected in that order.
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language.
OPTION
ꔂ Move
OPTION
ꔉ Enter
• Language
• Caption
ꔡ
: Off
• Power Indicator
• Initial Setting
2
3
Menu Language
: Off
• Caption
• Power Indicator
1
ꔂ Move
• Language
ꔉ
• Initial Setting
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select OPTION.
4
ENTER
Select Language.
5
ENTER
Select Menu Language.
◀ English ▶
or
Close
• Set ID
MENU
ꔉ Enter
Menu Language
◀ English ▶
Audio Language
English
Subtitle Language
English
Close
Select your desired language.
From this point on, the on-screen
menus will be shown in the selected
language.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
CAPTION MODE/ SUBTITLE MODE
Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying
captioning information if provided on a program. Analog caption displays information at any position
on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would
be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to
memorize the caption/text mode which was last set when you turned the power off. This function is
only available when Caption Mode is set On.
ꔂ Move
ꔉ Enter
• Language
• Caption
: Off
ꔉ
ꔀ
• Caption
On
Mode
▶
CC 1
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
4
MENU
Select OPTION.
ENTER
Select Caption or Subtitle.
Close
Select Mode.
5
Select CC1-2 or Text1-2.
6
3
ꔉ Enter
◀
: CC1
• Power Indicator
• Initial Setting
1
ꔂ Move
• Language
• Power Indicator
2
OPTION
ENTER
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
SOUND & LANGUAGE CONTROL
OPTION
Select On.
149
SOUND & LANGUAGE CONTROL
LANGUAGE SELECTION (For 32/42/47/55LE5500-DA, 42LE5550-DA,
42/47LE8500-DA, 32/42/47/55LD650-DA, 42/47LX6500-DD)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a
selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not
supported, you can select language in secondary category.
Audio Language Selection
Subtitle Language Selection
When two or more audio languages are broad- When two or more subtitle languages are
cast, you can select the audio language.
broadcast, you can select the subtitle language.
1
Q.MENU
Select Audio.
1
ENTER
SUBTITLE
Select a desired subtitle language.
2
Select other languages.
3
Q.MENU
Subtitle Language OSD Information
Display
N.A
ꔬ
Return to TV viewing.
Status
Not Available
Subtitle for "Hard of Hearing"
Audio Language OSD Information
SOUND & LANGUAGE CONTROL
N.A
꘏
ꔨ
ꔔ
ꔬ
ꔩ
ꔰ
MUTE
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for "Visual Impaired"
Audio for "Hearing Impaired"
Dolby Digital Plus Audio
The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by
the service provider.
ꔛ
When you select supplementary Audio (Audio
for "Visual/Hearing Impaired") the TV may
output a part of the Main audio.
ꔛ You
can also adjust Language in the OPTION
MENU.
Hard of Hearing
1
2
MENU
Select OPTION.
ENTER
Select Hard of Hearing(ꔞ).
ENTER
Select On or Off.
3
4
BACK
150
ꔛ
Return to the previous menu.
TIME SETTING
CLOCK SETTING
You must set the time correctly before using on/off timer function.
TIME
ꔂ Move
ꔉ Enter
• Clock
ꔉ
• Off Time
ꔡ
: Off
TIME
• Clock
• Off Time
• On TIme
: Off
• On TIme
• Sleep Timer
: Off
• Sleep Timer
ꔂ Move
ꔉ Enter
◀ 21ꔉ ▶
Date
: Off
Month
: Off
Year
: Off
◀
02
10 AM
Minute
10
ꔉ Enter
Auto
Date
2010
Hour
ꔂ Move
or
▶
3
Month
Mar.
Year
2008
Hour
16
Minute
09
Close
Close
1
2
MENU
Select TIME.
ENTER
Select Clock.
ENTER
Select Auto or Manual.
(For 32/42/47/55LE5500-DA, 42LE5550-DA)
3
3
Select the Date, Month, Year, Hour, or Minutes option.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
TIME SETTING
4
151
TIME SETTING
ON/OFF TIME SETTING
This function operates only if the current time has been set.
The Off Time function overrides the On Time function if they are both set to the same time.
The TV must be in standby mode for the On Time to work.
TIME
ꔂ Move
ꔉ Enter
• Clock
TIME
• Clock
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
ꔂ Move
ꔉ Enter
ꔎ 21 Feb. 2010 10:10
ꔎ Feb. 21, 2010 10:10 AM
• Off Time
ꔉ
ꔀ
: Off
Repeat
◀ Once ▶
• On TIme
: 6:30 AM (Once)
ꔉ
6 AM
• Sleep Timer Hour : Off
Minute
Repeat
30
Input
TV
or
06
Minute
30
Input
TV 2-0
Channel
TV 2-0
Volume
30
Volume
30
ꔛ
MENU
2
3
TIME SETTING
152
Select TIME.
ꔛ
ENTER
ENTER
4
Select Off Time or On Time.
Select Repeat.
Select Off, Once, Daily, Mon.~Fri.,
Mon.~Sat., Sat.~ Sun., or Sun..
5
Select and set Hour or Minute.
6
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
TV
Channel
Close
Close
1
◀ Once ▶
Hour
To cancel On/Off Time function, select
Off.
Only for On Time function
1
2
3
4
ENTER
Select Input.
Select the desired input source.
When Selecting TV:
set the channel at turn-on.
Adjust to sound level at
turn-on.
SLEEP TIMER SETTING
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME
ꔂ Move
ꔉ Enter
• Clock
TIME
ꔂ Move
ꔉ Enter
• Clock
• Off Time
: Off
• Off Time
: Off
• On TIme
: Off
• On TIme
: Off
• Sleep Timer
: Off
• Sleep Timer
: Off
ꔠ
ꔉ
ꔑ Off
□ 10 min.
□ 20 min.
ꔉ
ꔡ
ꔉ
□ 30 min.
□ 60 min.
□ 90 min.
□ 120 min.
□ 180 min.
□ 240 min.
1
MENU
Select TIME.
ꔛ
ꔛ
2
3
ENTER
Select Sleep Timer.
ENTER
Make appropriate adjustments.
4
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
To cancel the Sleep Timer, select Off.
You can also adjust Sleep Timer in
the Q.MENU.
TIME SETTING
153
PARENTAL
CONTROL
PARENTAL
CONTROL
Parental Control can be used to block specific channels and other viewing sources.
SET PASSWORD & LOCK SYSTEM
Setting up Your Password
Set up blocking schemes to block specific channels and external viewing sources.
A password is required to gain access to this menu.
LOCK
ꔂ Move
• Set Password
• Lock System
ꔉ Enter
ꔉ
: On
• Block Channel
ꔡ
Enter Password
*
*
*
*
• Input Block
• Key Lock
1
MENU
ENTER
Close
: Off
Select LOCK.
ꔛ
ꔛ
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
PARENTAL CONTROL
154
Input the password.
ꔛ
Enter the password as requested.
The TV is set up with the initial
password “0-0-0-0”.
If you forget your password, press
“0-3-2-5” on the remote control.
Set Password
Change the password by inputting a new password twice.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
• Key Lock
1
ENTER
MENU
2
1
ꔉ
: On
ꔡ
LOCK
ꔂ Move
• Set Password
• Lock System
: On
• Block Channel
• Block Channel
• Input Block
• Input Block
: Off
• Key Lock
: Off
ꔉ Enter
New
*
*
*
*
Confirm
*
*
*
*
Close
Select LOCK.
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select Set Password.
1
ENTER
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
5
Choose any 4 digits for your new
password.
As soon as the 4 digits are entered,
re-enter the same 4 digits on the
Confirm.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PARENTAL CONTROL
155
PARENTAL CONTROL
Lock System
Enables or disables the blocking scheme you set up previously.
LOCK
ꔂ Move
• Set Password
• Lock System
ꔉ Enter
LOCK
ꔂ Move
• Set Password
: On
• Lock System
• Block Channel
• Input Block
• Key Lock
1
MENU
2
1
ENTER
: Off
Select LOCK.
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select Lock System.
ENTER
5
PARENTAL CONTROL
156
Select On or Off.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
: On
• Block Channel
ꔉ Enter
□ Off
ꔑ On
ꔠ
ꔉ
• Input Block
• Key Lock
ꔛ
: Off
When you select On, the Lock
System is enable.
CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that you do not want your children to watch.
ie.)
Block Channel
LOCK
ꔂ Move
• Set Password
• Lock System
Favorite Group: A
ꔉ Enter
: On
• Block Channel
Page 1/1
TV
Cable TV
ꔉ
ꔀ
• Input Block
• Key Lock
: Off
ꔉ CH.Change
ꔂ Navigation
ꘃ Page Change
ꕉ Previous
ꔅ Block/Unblock
1
MENU
2
1
ENTER
Select LOCK.
ꔛ
If a channel is locked, enter the
password to unlock it temporarily.
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select Block Channel.
ENTER
5
YELLOW
6
Select a channel to block or unblock.
Block or unblock a channel.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
PARENTAL CONTROL
157
PARENTAL CONTROL
EXTERNAL INPUT BLOCKING
Enables you to block an input.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
: On
• Lock System
• Block Channel
• Input Block
• Key Lock
ꔂ Move
ꔉ Enter
ie.)
• Set Password
ꔉ
ꔀ
: Off
: On
• AV1
• Block Channel
• AV2
Off
• Component1
Off
• Input Block
• Key Lock
: Off
◀
• Component2
Off
• Component3
Off
• RGB-PC
Off
• HDMI1
Off
• HDMI2
Off
• HDMI3
Off
ꔡ
Close
1
MENU
2
1
ENTER
Select LOCK.
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select Input Block.
ENTER
5
Select On or Off.
6
PARENTAL CONTROL
158
Select input source.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
Off
▶
KEY LOCK
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
LOCK
ꔂ Move
: On
• Lock System
• Block Channel
: Off
: On
• Block Channel
• Input Block
• Key Lock
ꔉ Enter
• Set Password
• Input Block
ꔠ
ꔉ
• Key Lock
: Off
ꔑ Off
ꔉ
ꔡ
□ On
1
MENU
2
1
ENTER
Select LOCK.
ꔛ
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select Key Lock.
ENTER
5
Select On or Off.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
ꔛ
In Key Lock ‘On’, if the TV is turned
off, press the / I, INPUT, CH (ꔌꔍor
ꕌꕍ) button on the TV or POWER,
INPUT, CH (ꕌꕍ) or NUMBER buttons on the remote control.
With the Key Lock On, the display
‘ ! Key Lock’ appears on the screen
if any button on the front panel is
pressed while viewing the TV.
PARENTAL CONTROL
159
APPENDIX
TROUBLESHOOTING
Abnormal Operation
ꔛ
The remote control
doesn’t work
ꔛ
ꔛ
ꔛ
ꔛ
Power is suddenly
turned off
ꔛ
ꔛ
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
*This feature is not available for all models.
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes.
Video Problems
ꔛ
ꔛ
No picture &No sound
ꔛ
ꔛ
ꔛ
Picture appears slowly
after switching on
ꔛ
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
ꔛ
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
ꔛ
No or poor color or
poor picture
ꔛ
ꔛ
ꔛ
Horizontal/vertical bars
or picture shaking
APPENDIX
160
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
ꔛ
Check for local interference such as an electrical appliance or power
tool.
ꔛ
Poor reception on
some channels
ꔛ
ꔛ
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Lines or streaks in pictures
ꔛ
Check antenna (Change the direction of the antenna).
ꔛ
If the HDMI cables don’t support High Speed HDMI, it can cause flickers
or no screen display. In this case use the latest cables that support High
Speed HDMI
No picture when connecting HDMI
Audio Problems
ꔛ
Picture OK & No
sound
ꔛ
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
ꔛ
Adjust Balance in menu option.
ꔛ
A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault
with the product.
ꔛ
Check High Speed HDMI cable.
Check USB cable over version 2.0.
Use normal MP3 file.
*This feature is not available for all models.
ꔛ
ꔛ
No output from one
of the speakers
Unusual sound from
inside the product
No sound
when connecting
HDMI/USB
ꔛ
ꔛ
PC Mode Problems
The signal is out of
range
Vertical bar or stripe
on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable or single color
When connecting the
HDMI cable to the PC,
there is no audio.
ꔛ
ꔛ
Adjust resolution, horizontal frequency, or vertical frequency on the PC.
Check the input source.
ꔛ
Activate the Auto configure feature or adjust size, phase, or H/V position.
(Option)
ꔛ
Check the signal cable.
Reinstall the PC video card.
ꔛ
ꔛ
Check the manual for the video card in the PC to see if it supports
HDMI audio and how to set it up properly.
APPENDIX
161
APPENDIX
Movie List Problems
The file does not
appear on the Movie
List.
ꔛ
Check whether the extension is supported.
Message is displayed
saying “This file is
invalid” or the audio is
working normally but
the video is not working normally.
ꔛ
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the resolution is supported.
Check whether the video/audio codec is supported.
Check whether the frame rate is supported.
Message is displayed
saying “Unsupported
Audio” or the video is
working normally but
the audio is not working normally.
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
ꔛ
Subtitle is not working.
ꔛ
ꔛ
ꔛ
APPENDIX
162
Check whether the
file is damaged.)
Check whether the
Check whether the
Check whether the
file is playing normally on a PC. (Check whether the
audio codec is supported.
bit rate is supported.
sample rate is supported.
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
Check whether the video file and subtitle file name are the same.
Check whether the video file and subtitle file are located in the same
folder.
Check whether the subtitle file is supported.
Check whether the language is supported. (When you open the subtitle
file in Memo Pad, you can check the language of the subtitle file.)
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you
can enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
2
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s
almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
ꔛ
ꔛ
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
► If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
APPENDIX
163
APPENDIX
PRODUCT SPECIFICATIONS
32LD650
(32LD650-MA, 32LD650-DA)
42LD650
(42LD650-MA, 42LD650-DA)
797.0 mm x 555.0 mm x 207.0 mm
(31.3 inch x 21.8 inch x 8.1 inch)
1024.0 mm x 685.0 mm x 261.0 mm
(40.3 inch x 26.9 inch x 10.2 inch)
797.0 mm x 495.0 mm x 73.8 mm
(31.3 inch x 19.4 inch x 2.9 inch)
1024.0 mm x 621.0 mm x 76.8 mm
(40.3 inch x 24.4 inch x 3.0 inch)
With stand
8.7 kg (19.1 lb)
15.5 kg (34.1 lb)
Without stand
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
Without stand
7.6 kg (16.7 lb)
13.9 kg (30.6 lb)
Current Value
1.5 A
2.1 A
MODELS
47LD650
(47LD650-MA, 47LD650-DA)
55LD650
(55LD650-MA, 55LD650-DA)
With stand
1137.0 mm x 758.0 mm x 270.0 mm
(44.7 inch x 29.8 inch x 10.6 inch)
1329.0 mm x 872.0 mm x 330.0 mm
(52.3 inch x 34.3 inch x 12.9 inch)
Without stand
1137.0 mm x 685.0 mm x 76.8 mm
(44.7 inch x 26.9 inch x 3.0 inch)
1329.0 mm x 796.0 mm x 96.5 mm
(52.3 inch x 31.3 inch x 3.7 inch)
With stand
20.3 kg (44.7 lb)
33.0 kg (72.7 lb)
Without stand
Dimensions
(Width x
Height
x Depth)
Weight
18.3 kg (40.3 lb)
29.8 kg (65.6 lb)
Current Value
2.5 A
3.4 A
MODELS
32LE5500
(32LE5500-MA, 32LE5500-DA)
42LE5500
(42LE5500-MA, 42LE5500-DA,
42LE5500-MD)
42LE5550 (42LE5550-DA)
With stand
784.6 mm x 558.1 mm x 221.0 mm
(30.8 inch x 21.9 inch x 8.7 inch)
1016.0 mm x 692.0 mm x 270.0 mm
(40.0 inch x 27.2 inch x 10.6 inch)
Without stand
784.6 mm x 499.5 mm x39.9 mm
(30.8 inch x 19.6 inch x 1.5 inch)
1016.0 mm x 630.0 mm x 29.3 mm
(40.0 inch x 24.8 inch x 1.1 inch)
With stand
12.6 kg (27.7 lbs)
19.5 kg (42.9 lb)
Without stand
10.5 kg (23.1 lbs)
16.7 kg (36.8 lb)
Current Value
1.3 A
1.5 A
MODELS
47LE5500
(47LE5500-MA, 47LE5500-DA)
55LE5500
(55LE5500-MA, 55LE5500-DA)
With stand
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
1306.0 mm x 867.0 mm x 328.0 mm
(51.4 inch x 34.1 inch x 12.9 inch)
Without stand
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
1306.0 mm x 797.0 mm x 29.3 mm
(51.4 inches x 31.3 inch x 1.1 inch)
With stand
22.9 kg (50.4 lb)
34.5 kg (76.0 lbs)
Without stand
19.6 kg (43.2 lb)
28.8 kg (63.4 lbs)
Current Value
1.7 A
2.0 A
MODELS
50PK950R
(50PK950R-MA)
60PK950R
(60PK950R-MA)
1190.0 mm x 804.5 mm x 294.5 mm
(46.8 inch x 31.6 inch x 11.5 inch)
1408.8 mm x 937.9 mm x 384.0 mm
(55.4 inch x 36.9 inch x 15.1 inch)
1190.0 mm x 737.0 mm x 52.4 mm
(46.1 inch x 29.0 inch x 2.0 inch)
1408.8 mm x 860.7 mm x 52.4 mm
(55.4 inch x 33.8 inch x 2.0 inch)
With stand
34.8 kg (76.7 lbs)
50.9 kg (112.2 lbs)
Without stand
30.2 kg (66.5 lbs)
43.3 kg (95.4 lbs)
3.9 A
4.5 A
Dimensions
(Width x
Height
x Depth)
Weight
Dimensions
(Width x
Height
x Depth)
Weight
APPENDIX
Dimensions
(Width x
Height
x Depth)
Weight
With stand
With stand
Without stand
Current Value
164
ꔛ
The specifications shown above may be changed without prior notice for quality improvement.
32LE7500
(32LE7500-MA)
42LE7500
(42LE7500-MA)
With stand
786.4 mm x 557.6 mm x 221.0 mm
(30.9 inch x 21.9 inch x 8.7 inch)
1018.2 mm x 693.5 mm x 269.8 mm
(40.0 inch x 27.3 inch x 10.6 inch)
Without stand
786.4 mm x 500.4 mm x 39.9 mm
(30.9 inch x 19.7 inch x 1.5 inch)
1018.2 mm x 630.7 mm x 29.3 mm
(40.0 inch x 24.8 inch x 1.1 inch)
With stand
13.9 kg (30.6 lb)
21.9 kg (48.2 lb)
Without stand
11.7 kg (25.7 lb)
19.1 kg (42.1 lb)
Current Value
1.3 A
1.5 A
MODELS
47LE7500
(47LE7500-MA)
55LE7500
(55LE7500-MA)
With stand
1128.6 mm x 758.9 mm x 284.4 mm
(44.4 inch x 29.8 inch x 11.1 inch)
1306.0 mm x 869.0 mm x 328.0 mm
(51.4 inch x 34.2 inch x 12.9 inch)
Without stand
1128.6 mm x 758.9 mm x 284.4 mm
(44.4 inch x 29.8 inch x 11.1 inch)
1306.0 mm x 797.4 mm x 31.2 mm
(51.4 inch x 31.3 inch x 1.2 inch)
With stand
26.2 kg (57.7 lb)
39.1 kg (86.2 lb)
Without stand
23.0 kg (50.7 lb)
33.5 kg (73.8 lb)
Current Value
1.7 A
2.0 A
MODELS
42LE8500
(42LE8500-MA, 42LE8500-DA)
47LE8500
(47LE8500-MA, 47LE8500-DA)
With stand
1013.3 mm x 705.8 mm x 235.5 mm
(39.8 inch x 27.7 inch x 9.2 inch)
1122.6 mm x 769.3 mm x 275.0 mm
(44.1 inch x 30.2 inch x 10.8 inch)
Without stand
1013.3 mm x 645.8 mm x 34.5 mm
(39.8 inch x 25.4 inch x 1.3 inch)
1122.6 mm x 707.3 mm x 34.5 mm
(44.1 inch x 27.8 inch x 1.3 inch)
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
Dimensions
(Width x
Height
x Depth)
Weight
Dimensions
(Width x
Height
x Depth)
With stand
27.2 kg (59.9 lbs)
31.6 kg (69.6 lbs)
Without stand
23.1 kg (50.9 lbs)
26.9 kg (59.3 lbs)
Current Value
1.6 A
1.7 A
MODELS
42LX6500
(42LX6500-DD)
47LX6500
(47LX6500-DD)
With stand
1016.0 mm x 692.0 mm x 270.0 mm
(40.0 inch x 27.2 inch x 10.6 inch)
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
Without stand
1016.0 mm x 630.0 mm x 29.3 mm
(40.0 inch x 24.8 inch x 1.1 inch)
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
With stand
19.5 kg (42.9 lbs)
22.9 kg (50.4 lbs)
Without stand
16.7 kg (36.8 lbs)
19.6 kg (43.2 lbs)
1.6 A
1.8 A
Weight
Dimensions
(Width x
Height
x Depth)
Weight
Current Value
ꔛ
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
165
APPENDIX
For 32/42/47/55LD650-MA, 32/42/47/55LE5500-MA, 32/42/47/55LE7500-MA,
50/60PK950R-MA, 42/47LE8500-MA
Power requirement
AC 100-240V ~ 50/60Hz
Television System
NTSC, PAL-M/N
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
75 Ω
32 ~ 104°F (0 ~ 40°C)
Operating Humidity
Less than 80%
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Storage Humidity
Less than 85%
For 32/42/47/55LE5500-DA, 42LE5550-DA, 32/42/47/55LD650-DA, 42/47LE8500-DA,
42/47LX6500-DD
Power requirement
AC 100-240V ~ 50/60Hz
Television System
Analog : NTSC-M, DTV : DVB-T
Program Coverage
VHF 2-13, UHF 14-69, CATV 1, 14-125, DTV 14-69
External Antenna Impedance
Environment
condition
Operating Temperature
Operating Humidity
Less than 80%
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Storage Humidity
ꔛ
APPENDIX
166
75 Ω
32 ~ 104°F (0 ~ 40°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
*This feature is not available for all models.
Code Function
Note
Code
(Hexa)
Function
Note
08
Remote control Button
7E
SIMPLINK
Remote control Button
Remote control Button
(Hexa)
(Power On/Off)
45
Q.MENU
Remote control Button
30
AV MODE
43
MENU
Remote control Button
59
NETCAST
Remote control Button
0B
INPUT
Remote control Button
0F
TV
Remote control Button
10-19
Number Key
0-9
Remote control Button
5B
EXIT
Remote control Button
53
LIST
Remote control Button
72
RED
Remote control Button
1A
Q.VIEW
Remote control Button
71
GREEN
Remote control Button
09
MUTE/DELETE
Remote control Button
63
YELLOW
Remote control Button
02
VOL +
Remote control Button
61
BLUE, L/R SELECT
Remote control Button
03
VOL -
Remote control Button
95
ENERGY SAVING
Remote control Button
00
CH ꕌ
Remote control Button
B1
ꕗ
Remote control Button
Remote control Button
01
CH ꕍ
Remote control Button
B0
1E
MARK/ FAV/
CHAR/NUM
Remote control Button
BA
ꕖ
ꕘ
Remote control Button
40
ꕌ
Remote control Button
8F
ꕚ
Remote control Button
41
ꕍ
Remote control Button
8E
ꕙ
Remote control Button
07
<
Remote control Button
AB
GUIDE
Remote control Button
06
>
Remote control Button
39
SUBTITLE
Remote control Button
44
ENTER
Remote c ontrol Button
AA
INFO
Remote control Button
28
BACK
Remote control Button
79
RATIO
Remote control Button
DC
3D
Remote control Button
APPENDIX
167
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as
a computer or an A/V control system) to control the TV’s functions externally.
ꔛ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and
software.
The instructions below are provided to help with programming software or to test functionality using
telenet software.
i.e)
RS-232C IN
(CONTROL&SERVICE)
RGB IN (PC)
/DVI IN
LAN
3
RGB/DVI OPTICAL DIGITAL
AUDIO IN
᫼
WIRELESS
CONTROL
AUDIO OUT
1
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
AV IN 1 COMPONENT IN
VIDEO L(MONO) AUDIO R
2
PC
Type of Connector; D-Sub 9-Pin Male
No.
1
2
3
4
5
6
7
8
9
APPENDIX
168
Communication Parameters
Baud rate : 9600 bps (UART)
Data length : 8 bits
ꔛ Parity : None
ꔛ Stop bit : 1 bit
ꔛ Communication code : ASCII code
ꔛ Use a crossed (reverse) cable.
ꔛ
Pin Name
ꔛ
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
TV
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
3-Wire Configurations
(Not standard)
PC
TV
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
OPTION
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
• Power Indicator
: Off
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔉ
ꔀ
• Set ID
:1
• Mode Setting
: Home Use
◀
1
ENTER
ENTER
4
Select OPTION.
▶
Close
ꔛ
MENU
3
ꔉ Enter
• Power Indicator
• Initial Setting
2
ꔂ Move
• Language
• Caption
1
OPTION
Real data mapping
0
Step 0
A
Step 10 (Set ID 10)
F
Step 15 (Set ID 15)
10
Step 16 (Set ID 16)
63
Step 99 (Set ID 99)
64
Step 100
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is 1~
99.
BACK
Return to the previous menu.
EXIT
Return to TV viewing.
APPENDIX
169
APPENDIX
Command Reference List
COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 - 01
02. Input Select
x
b
► P.171
[Command 1] : First command to control the set. (j,
03. Aspect Ratio
k
c
► P.171
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
k, m or x)
12. OSD Select
k
l
00 - 01
13. Remote
Control Lock
Mode
k
m
00 - 01
14. Treble
k
r
00 - 64
[Command 2] : Second command to control the
set.
[Set ID] : You can adjust the set ID to choose
desired TV ID number in Setup menu.
Adjustment range is 1-99. When selecting
Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal
(1-99) on menu and as Hexa decimal (0x0
- 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of
command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the
standby mode.
15. Bass
k
s
00 - 64
OK Acknowledgement
16. Balance
k
t
00 - 64
[Command2][ ][Set ID][ ][OK][Data][x]
17. Color
Temperature
x
u
00 - 64
18. ISM Method
j
p
► P.172
19. Energy Saving
j
q
► P.172
20. Auto
j
Configuration
u
► P.172
22. Channel Add/
Del
m
b
00 - 01
23. Key
m
c
► P.173
24. Backlight
m
g
00 - 64
04. Screen Mute
k
d
00 - 01
05. Volume Mute
k
e
00 - 01
06. Volume
Control
k
f
00 - 64
07. Contrast
k
g
00 - 64
08. Brightness
k
h
00 - 64
09. Color
k
i
00 - 64
10. Tint
k
j
00 - 64
11. Sharpness
k
k
00 - 64
For LED LCD TV/LCD TV
COMMAND1
21.
Channel
Tuning
APPENDIX
170
Transmission / Receiving Protocol
COMMAND1
COMMAND2
For Plasma TV
The TV transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
DATA00
(Hexadecimal)
DATA01
(Hexadecimal)
m
a
physical
program
high
major
program
low
DATA02
(Hexadecimal)
DATA03
(Hexadecimal)
DATA04
(Hexadecimal)
DATA05
(Hexadecimal)
major low
minor
high
minor low
attribute
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[NG] : Use the large character
01. Power (Command: k a)
Data 01: Screen mute on (Picture off)
To control Power On/Off of the TV.
Data 10: Video-out Mute on
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Power Off
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute
on, TV will not display On Screen Display (OSD).
Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
02. Input Select (Command: x b)
To select input source for TV.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data Structure
MSB
0
Data 01: Volume mute off (Volume on)
LSB
0
0
0
05. Volume Mute (Command: k e)
0
External Input
0
0
0
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Input Number
HDMI
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
07. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
* Use the feature depending on your model.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
* Detail : CATV(0001 0001)
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data 07: 14:9 (for ***-DA)
Data 02: 16:9
Data 09: Just scan
Data 04: Zoom
Data 0B: Full Wide (for ***-DA)
Data 06: Original (for ***-DA)
Data 06: Set by program
Data 10 to 1F : Cinema Zom 1 to 16
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
04. Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 00: Screen mute off (Picture on), Video-out Mute off
171
APPENDIX
10. Tint (Command: k j)
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
17. Color Temperature (Command: x u)
Data Red: 00 - Green: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
11. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
18. ISM Method (Command: j p) (For Plasma TV)
To avoid having a fixed image remain on screen.
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
Data 02: Orbiter
Data 08: Normal
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
04: White Wash
20: Color Wash
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
To lock the remote control and the front panel controls on the set.
Data
Data
Data
Data
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m)
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn
on by POWER button of remote control and on the TV.
00: Off
Data 01: Minimum
02: Medium
Data 03: Maximum
04: Auto (depending on model)
05: Screen off
20. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in
RGB-PC mode.
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
21. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor number.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Physical Channel Number(Transmit by
Hexadecimal code)
NTSC air: 02~45, NTSC cable: 01, 0e~7d
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
172
Data 01 & 02: Major Channel Number(two part) or
Channel Number(one part)
Data 01: High byte
Data 02: Low byte
Two part channel number. Major number-Minor
number One part channel number.
In case of using one part channel number, minor
channel does not need.
Data 03 & 04: Minor Channel Number
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Not needed for NTSC.
Data 03 : High byte
Data 04 : Low byte
Data5:
7
6
5
Main/Sub
Picture
Two/One Part
Channel
Using Physical
Channel
4
Reserved
3
2
1
0
0 Main
0 Two
1 Sub
1 One
0 Use
x
0
0
0
0
NTSC Air
1 No Use
x
0
0
0
1
NTSC Cable
* Two/One part Channel: 6th bit
This bit is used in a cable-ready system.
* Two/One part Channel: 5th bit
If the channel band is NTSC air or NTSC cable, channel
tuning can be done by only physical channel. In this case,
using physical channel bit must be low(0).
Step
22. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Examples)
1. Analog channel: NTSC cable, channel number(35),
main picture
23. Key (Command: m c)
To send IR remote control code.
Command: ma 00 23 xx xx xx xx 01
Transmission [m][c][ ][Set ID][ ][Data][Cr]
attribute(0x01): main picture, tow part(it's not mandatory), using physical channel, NTSC cable xx' data: don't
care major and minor channel number in case analog
channel tuning
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement[a][ ][Set ID][ ][OK][Data00]
[Data01] [Data02][Data03][Data04] [Data05] [x][a]
[ ][Set ID][ ][NG][Data00][x]
See page 167.
When TV is in the standby mode, TV will turn on by
POWER button of remote control only.
24. Backlight (Command: m g) (For LED LCD TV, LCD TV)
To adjust screen backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
173
APPENDIX
For 32/42/47/55LE5500-DA, 42LE5550-DA, 42/47LX6500-DA, 42/47LE8500-DA, 32/42/47/55LD650-DA
21. Channel Tuning (Command: m a)
To tune channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ]
[Data2][Cr]
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 ->
00 2F (2FH)
No. 394 ->
01 8A (18AH),
DTV No. 0 -> Don't care
Data02
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
0x80 : CATV Main
Channel data range
Analog air - Min: 02 ~ Max: 45 (2~69)
Analog cable - Min: 01 ~ Max: 7D(1~125)
Digital - Min: 01 ~ Max: 3E7(1~999)
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 ~ Max: 7DH
APPENDIX
174
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/
LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, jfsutils, lzo, msdl-1.1, mtd-utils, ntpclient, procps
LGPL LIBRARIES:
Atk, cairo, directFB, ffmpeg, glib, GnuTLS, gtk+, iconv, libintl, libgcrypt, libgpg-error, libsoup, libusb, pango,
uClibc, webkit
MPL LIBRARIES:
Nanox, spidermonkey
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics :
opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/old-licenses/
gpl-2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
APPENDIX
This product includes other open source software.
► boost C++: software developed by http://www.boost.org distributed under the Boost Software License,
Version 1.0
► c-ares : copyright © 1998 by the Massachusetts Institute of Technology
►expat:
- copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
- copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
► fontconfig: copyright © 2001, 2003 Keith Packard
► freetype: copyright © 2003 The FreeType Project (www.freetype.org).
► ICU: copyright © 1995-2008 International Business Machines Corporation and others.
► libcurl: copyright © 1996 - 2008, Daniel Stenberg.
► libjpeg: This software is based in part on the work of the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
► libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
► libpng: copyright © 1998-2008 Glenn Randers-Pehrson
► libupnp: copyright © 2000-2003 Intel Corporation
► libxml2 : copyright © 1998-2003 Daniel Veillard
► libxslt: copyright © 2001-2002 Daniel Veillard
► lua interpreter: copyright © 1994–2008 Lua.org, PUC-Rio
► md5: copyright © 1991-2, RSA Data Security, Inc
► openSSL:
- cryptographic software written by Eric Young.
- software written by Tim Hudson.
- software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
► pixman:
- copyright © 1987, 1988, 1989, 1998 The Open Group
- copyright © 1987, 1988, 1989 Digital Equipment Corporation
- copyright © 1999, 2004, 2008 Keith Packard
- copyright © 2000 SuSE, Inc.
- copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
- copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
- copyright © 2004 Nicholas Miell
- copyright © 2005 Lars Knoll & Zack Rusin, Trolltech
- copyright © 2005 Trolltech AS
- copyright © 2007 Luca Barbato
- copyright © 2008 Aaron Plattner, NVIDIA Corporation
- copyright © 2008 Rodrigo Kumpera
- copyright © 2008 André Tupinambá
- copyright © 2008 Mozilla Corporation
- copyright © 2008 Frederic Plourde
► portmap: copyright © 1983,1991 The Regents of the University of California.
► tiff: copyright © 1987, 1993, 1994 The Regents of the University of California.
► tinyxml: copyright © 2000-2006 Lee Thomason
► xyssl:
-copyright © 2006-2008 Christophe Devine
-copyright © 2009 Paul Bakker
► zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, subject to the following conditions:
175
NOTE
ENG
Some video codecs listed in the manual may not be
supported, depending on the region (country).
POR
Alguns codecs de vídeo listados no manual podem não
ser suportados, dependendo da região (país).
POL
Niektóre kodeki wideo wymienione w instrukcji mogą
nie być obsługiwane, w zależności od regionu (kraju).
SPA
Algunos códecs de vídeo que figuran en el manual
pueden no ser compatibles, dependiendo de la región
(país).
THA
OWNER’S MANUAL
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
LED LCD TV / LCD TV
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD TV MODELS
LCD TV MODELS
PLASMA TV MODELS
32LE5500
42LE5500
47LE5500
55LE5500
42LE5550
42LE8500
47LE8500
32LD650
42LD650
47LD650
55LD650
50PK950R
60PK950R
32LE7500
42LE7500
47LE7500
55LE7500
42LX6500
47LX6500
P/NO : MFL62883018 (1101-REV02)
www.lg.com
Download PDF

advertising