LG | 39LN5100 | LG 39LN5100 Owner’s Manual

OWNER’S MANUAL
LED TV
*LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LN510*
LN511*
LN512*
LN513*
LN515*
LN49**
P/NO : MFL67710802 (1301-REV00)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
SAFETY INSTRUCTIONS
8
INSTALLATION PROCEDURE
8
ASSEMBLING AND PREPARING
8
10
11
12
12
13
15
16
17
18
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
- Attaching the shelf stand
- How to attach to masonry walls
Tidying cables
19
MAKING CONNECTIONS
19
20
20
21
21
22
22
Antenna connection
HDMI connection
Component connection
Composite connection
USB connection
Audio System connection
- External Stereo Connection
23
REMOTE CONTROL
24
WATCHING TV
24
24
24
24
25
26
26
26
26
27
Turning the TV on for the first time
Watching TV
Managing programmes
- Automatically setting up programme
- Manually setting up programme
- Editing your programme list
- Selecting a programme on the programme
list
Using additional options
- Adjusting aspect ratio
- Using the input list
28
ENTERTAINMENT
28
29
30
31
32
34
Connecting USB storage devices
Browsing files
Viewing photos
Listening to music
Viewing movies
DivX® VOD Guide
35
CUSTOMIZING TV SETTING
35
35
35
36
38
39
40
40
Accessing main menus
Customizing Settings
- SETUP Settings
- PICTURE Settings
- AUDIO Settings
- TIME Settings
- OPTION Settings
- LOCK Settings
41
TELETEXT
41
41
41
41
41
41
41
Switch On/Off
Simple Text
- Page selection
- Programming a colour button in LIST
mode
Fastext
- Page selection
Special Teletext Function
42
MAINTENANCE
42
42
42
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
42
TROUBLESHOOTING
43
SPECIFICATIONS
46
LICENSES
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
yy If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and
remote control in the
following environments:
--A location exposed to
direct sunlight
--An area with high humidity
such as a bathroom
--Near any heat source
such as stoves and other
devices that produce heat
--Near kitchen counters or
humidifiers where they can
easily be exposed to steam
or oil
--An area exposed to rain or
wind
--Near containers of water
such as vases
Otherwise, this may result in
fire, electric shock, malfunction
or product deformation.
yyDo not place the product
where it might be exposed to
dust.
This may cause a fire
hazard.
yyMains Plug is the
TV connecting/
disconnecting device to AC
mains electric supply. This
plug must remain readily
attached and operable when
TV is in use.
yyDo not touch the power plug
with wet hands. Additionally,
if the cord pin is wet or
covered with dust, dry the
power plug completely or
wipe dust off.
You may be electrocuted
due to excess moisture.
yyMake sure to connect Mains
cable to compliant AC mains
socket with Grounded earth
pin. (Except for devices
which are not grounded
on earth.) Otherwise
possibility you may be
electrocuted or injured.
3
yyInsert power cable plug
completely into wall socket
otherwise if not secured
completely into socket, fire
ignition may break out.
yyEnsure the power cord does
not come into contact with
hot objects such as a heater.
This may cause a fire or an
electric shock hazard.
yyDo not place a heavy object,
or the product itself, on
power cables.
Otherwise, this may result in
fire or electric shock.
yyBend antenna cable between
inside and outside building
to prevent rain from flowing
in.
This may cause water
damaged inside the Product
and could give an electric
shock.
yyWhen mounting TV onto wall
make sure to neatly install
and isolate cabling from
rear of TV as to not create
possibility of electric shock /
fire hazard.
yyDo not plug too many
electrical devices into a
single multiple electrical
outlet.
Otherwise, this may result in
fire due to over-heating.
yyDo not drop the product
or let it fall over when
connecting external devices.
Otherwise, this may result
in injury or damage to the
product.
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyKeep the packing antimoisture material or vinyl
packing out of the reach of
children.
Anti-moisture material is
harmful if swallowed. If
swallowed by mistake, force
the patient to vomit and
visit the nearest hospital.
Additionally, vinyl packing
can cause suffocation. Keep
it out of the reach of children.
yyDo not spray water on the
product or scrub with an
inflammable substance
(thinner or benzene). Fire or
electric shock accident can
occur.
yyDo not let your children climb
or cling onto the TV.
Otherwise, the TV may
fall over, which may cause
serious injury.
yyNever touch this product or
antenna during a thunder or
lighting storm.
You may be electrocuted.
yyDispose of used batteries
carefully to protect a child
from eating them.
Please seek Doctor- Medical
Attention immediately if child
consumes batteries.
yyDo not insert any metal
objects/conductors (like
a metal chopstick/cutlery/
screwdriver) between power
cable plug and input Wall
Socket while it is connected
to the input terminal on the
wall. Additionally, do not
touch the power cable right
after plugging into the wall
input terminal.
You may be electrocuted.
(Depending on model)
yyDo not put or store
inflammable substances
near the product. There is
a danger of combustion/
explosion or fire due to
careless handling of the
inflammable substances.
yyDo not drop metallic objects
such as coins, hair pins,
chopsticks or wire into the
product, or inflammable
objects such as paper and
matches. Children must pay
particular attention.
Electrical shock, fire or injury
can occur. If a foreign object
is dropped into the product,
unplug the power cord and
contact the service centre.
yyDo not allow any impact,
shock or any objects to fall
into the unit, and do not drop
anything onto the screen.
You may be injured or the
product can be damaged.
yyNever touch the wall outlet
when there is leakage of
gas, open the windows and
ventilate.
It may cause a fire or a burn
by a spark.
yyDo not disassemble, repair
or modify the product at your
own discretion.
Fire or electric shock
accident can occur.
Contact the service centre
for check, calibration or
repair.
yyIf any of the following
occur, unplug the product
immediately and contact
your local service centre.
--The product has been
impacted by shock
--The product has been
damaged
--Foreign objects have
entered the product
--The product produced
smoke or a strange smell
This may result in fire or
electric shock.
SAFETY INSTRUCTIONS
yyApparatus shall not be
exposed to dripping or
splashing and no objects
filled with liquids, such as
vases, shall be placed on
the apparatus.
CAUTION
yyInstall the product where no
radio wave occurs.
yyThere should be enough
distance between an outside
antenna and power lines
to keep the former from
touching the latter even
when the antenna falls.
This may cause an electric
shock.
yyDo not install the product
on places such as unstable
shelves or inclined surfaces.
Also avoid places where
there is vibration or where
the product cannot be fully
supported.
Otherwise, the product may
fall or flip over, which may
cause injury or damage to
the product.
yyIf you install the TV on a
stand, you need to take
actions to prevent the
product from overturning.
Otherwise, the product may
fall over, which may cause
injury.
yyIf you intend to mount the product to a wall,
attach VESA standard mounting interface
(optional parts) to the back of the product. When
you install the set to use the wall mounting
bracket (optional parts), fix it carefully so as not
to drop.
yyOnly use the attachments / accessories
specified by the manufacturer.
yyWhen installing the antenna,
consult with a qualified
service technician. If not
installed by a qualified
technician, this may create
a fire hazard or an electric
shock hazard.
yyWe recommend that you
maintain a distance of
at least 2 to 7 times the
diagonal screen size when
watching TV.
If you watch TV for a long
period of time, this may
cause blurred vision.
yyOnly use the specified type
of battery.
This could cause damage to
the remote control.
yyDo not mix new batteries
with old batteries.
This may cause the batteries
to overheat and leak.
yyBatteries should not be exposed to excessive
heat.eg keep away from direct Sunlight, open
fireplace and electric heaters.
yyDo not place non-rechargeable batteries in
charging device.
yyMake sure there are no
objects between the remote
control and its sensor.
yySignal from Remote Control
can be interrupted due to
external/internal lighting eg
Sunlight, fluorescent lighting.
If this occurs turn off lighting
or darken viewing area.
yyWhen connecting external
devices such as video game
consoles, make sure the
connecting cables are long
enough.
Otherwise, the product
may fall over, which may
cause injury or damage the
product.
yyDo not turn the product
On/Off by plugging-in or
unplugging the power plug to
the wall outlet. (Do not use
the power plug for switch.)
It may cause mechanical
failure or could give an
electric shock.
ENGLISH
ENG
yyUnplug the TV from AC
mains wall socket if you do
not intend to use the TV
for a long period of time.
Accumulated dust can cause
fire hazard and insulation
deterioration can cause
electric leakage/shock/fire.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyPlease follow the installation
instructions below to
prevent the product from
overheating.
--The distance between the
product and the wall should
be more than 10 cm.
--Do not install the product in
a place with no ventilation
(e.g., on a bookshelf or in
a cupboard).
--Do not install the product
on a carpet or cushion.
--Make sure the air vent is
not blocked by a tablecloth
or curtain.
Otherwise, this may result in
fire.
yyTake care not to touch the
ventilation openings when
watching the TV for long
periods as the ventilation
openings may become hot.
This does not affect the
operation or performance of
the product.
yyPeriodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer.
yyPrevent dust collecting on
the power plug pins or outlet.
This may cause a fire
hazard.
yyProtect the power cord from
physical or mechanical
abuse, such as being
twisted, kinked, pinched,
closed in a door, or walked
upon. Pay particular
attention to plugs, wall
outlets, and the point where
the cord exits the appliance.
yyDo not press strongly upon
the panel with a hand or
sharp object such as nail,
pencil or pen, or make a
scratch on it, as it may
cause damage to screen.
yyAvoid touching the screen or
holding your finger(s) against
it for long periods of time.
Doing so may produce some
temporary or permanent
distortion/damage to screen.
yyWhen cleaning the product
and its components, unplug
the power first and wipe it
with a soft cloth. Applying
excessive force may cause
scratches or discolouration.
Do not spray with water or
wipe with a wet cloth. Never
use glass cleaner, car or
industrial shiner, abrasives
or wax, benzene, alcohol
etc., which can damage the
product and its panel.
Otherwise, this may result in
fire, electric shock or product
damage (deformation,
corrosion or breakage).
yyAs long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yyWhen unplugging the cable,
grab the plug and unplug it,
by pulling at the plug. Don’t
pull at the cord to unplug the
power cord from the power
board, as this could be
hazardous.
yyWhen moving the product,
make sure you turn the
power off first. Then, unplug
the power cables, antenna
cables and all connecting
cables.
The TV set or power cord
may be damaged, which
may create a fire hazard or
cause electric shock.
yyWhen moving or unpacking
the product, work in pairs
because the product is
heavy.
Otherwise, this may result in
injury.
SAFETY INSTRUCTIONS
yyRefer all servicing to
qualified service personnel.
Servicing is required when
the apparatus has been
damaged in any way, such
as power supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus,
the apparatus has been
exposed to rain or moisture,
does not operate normally,
or has been dropped.
yyIf the product feels cold to
the touch, there may be
a small “flicker” when it is
turned on. This is normal,
there is nothing wrong with
product.
yyThe panel is a high
technology display product
with resolution of two million
to six million pixels. You
may see tiny black dots and/
or brightly coloured dots
(red, blue or green) at a
size of 1 ppm on the panel.
This does not indicate a
malfunction and does not
affect the performance and
reliability of the product.
This phenomenon also
occurs in third-party
products and is not subject
to exchange or refund.
yyYou may find different
brightness and colour of the
panel depending on your
viewing position(left/right/
top/down).
This phenomenon occurs
due to the characteristic
of the panel. It is not
related with the product
performance, and it is not
malfunction.
ENGLISH
ENG
yyContact the service centre
once a year to clean the
internal parts of the product.
Accumulated dust can cause
mechanical failure.
7
yyDisplaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from a
video game) for a prolonged time may cause
damage to the screen, resulting in retention of
the image, which is known as image sticking.
The warranty does not cover the product for
image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period (2
or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for
a long time, image sticking may occur on the
borders of the panel.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated
by plastic thermal contraction due to temperature and humidity. This noise is common for
products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
8
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy
yy
yy
yy
yy
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are using.
New features may be added to this TV in the future.
The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned
off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,
and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product
functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm
width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your
TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
9
ENGLISH
ENG
Remote control and
batteries (AAA)
(See p.23)
Owner’s manual
Cable holder
(Depending on model)
(See p.18)
Power Cord
Stand Screws
3EA, P5 x 25
4EA, M4 x 14
(Only LN510*, LN511*,
LN512*, LN513*)
(See p.12)
Stand Screws
4EA, P5 x 25
4EA, M4 x 14
(Only LN515*)
(See p.12)
Stand Rack Screws
3EA, M4 x 8
(Only LN515*)
(See p.16)
Desk-mount Screw
1EA
(See p.13)
Wall Plate
(Only LN515*)
(See p.16)
Wall mount screws
3EA, P5 x 69.5
(Only LN515*)
(See p.16)
Wall mount anchors
3EA
(Only LN515*)
(See p.17)
Stand Body /
Stand Base
(Only LN510*, LN511*,
LN512*, LN513*)
(See p.12)
Stand Body /
Stand Base
(Only LN515*)
(See p.12, 16)
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
Screen
OK
SETTINGS
INPUT
Remote control sensor
Power indicator
buttons
Speakers
Button
Description
Scrolls
H
through
HAdjusts
H
S
H
the saved programmes.
the volume level.
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be at
least 2 people.
yy When transporting the TV by hand, hold the TV as
shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as this may
result in damage to the screen.
yy It is recommended to move the TV in the box or
packing material that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power
cord and all cables.
yy When holding the TV, the screen should face away
from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly. Make
sure not to hold the transparent part, speaker, or
speaker grill area.
yy When transporting the TV, do not expose the TV to
jolts or excessive vibration.
yy When transporting the TV, keep the TV upright, never
turn the TV on its side or tilt towards the left or right.
yy Do not apply excessive pressure to cause flexing /
bending of frame chassis as it may damage screen.
ENGLISH
ENG
Lifting and moving the TV
11
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
LN510*, LN511*, LN512*, LN513*
1
LN515*
3EA
1
Stand Body
P5 x 25
Stand Body
Stand Base
2
Stand Base
2
4EA
P5 x 25
3
3
4
4EA
M4 x 14
4EA
M4 x 14
ASSEMBLING AND PREPARING
yy When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
yy Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after
being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
NOTE
yy Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
-- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
WARNING
yy To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
ENGLISH
ENG
Securing the TV to a table
CAUTION
13
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
yy Make sure that children do not climb on or hang
on the TV.
NOTE
yy Use a platform or cabinet that is strong and large
enough to support the TV securely.
yy Brackets, bolts and ropes are not provided. You
can obtain additional accessories from your local
dealer.
WARNING
yy If a television is not positioned in a sufficiently
stable location, it can be potentially hazardous
due to falling. Many injuries, particularly to
children, can be avoided by taking simple
precautions such as:
»» Using cabinets or stands recommended by
the manufacturer of the television.
»» Only using furniture that can safely support
the television.
»» Ensuring the television is not overhanging the
edge of the supporting furniture.
»» Not placing the television on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television
to a suitable support.
»» Not standing the televisions on cloth or other
materials placed between the television and
supporting furniture.
»» Educating children about the dangers of
climbing on furniture to reach the television or
its controls.
Using the Kensington security system
(This feature is not available for all models.)
The Kensington security system connector is located at
the rear of the TV. For more information of installation and
using, refer to the manual provided with the Kensington
security system or visit http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
ASSEMBLING AND PREPARING
Attach an optional wall mount bracket at the rear of the
TV carefully and install the wall mount bracket on a solid
wall perpendicular to the floor. When you attach the
TV to other building materials, please contact qualified
personnel.
LG recommends that wall mounting be performed by a
qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that
meet the VESA standard. Standard dimensions for the
wall mount kits are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
32LN510*,
32LN511*,
32LN512*,
32LN513*,
32LN515*
VESA (A x B)
200 x 100
Standard screw
M4
Number of screws 4
Wall mount bracket LSW130B
A
B
39/42LN510*,
39/42LN511*,
39/42LN512*,
39/42LN513*,
200 x 200
M6
4
LSW230B
CAUTION
yy Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
yy If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
yy Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
yy Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer’s warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation manual
and necessary parts.
yy The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
yy The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
yy For more information, refer to the manual supplied
with the wall mount.
ENGLISH
ENG
Mounting on a wall
15
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Attaching the shelf stand
5
Image shown may differ from your TV.
- You can use the shelf stand by putting STB (Set top
box).
LN515*
Stand Body
1
1EA
M4 x 8
Stand Base
CAUTION
2EA
2
M4 x 8
yy Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the Stand may tilt after being
installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
NOTE
yy To install wall mount anchor, you can refer to
p.17.
mm
150
3
350mm
STB
(Set top box)
Wall Plate
Shelf Stand
3EA
P5 x 69.5
4
Shelf Stand conditions of use
STB Dimensions (W x D)
STB Weight
Maximum supported weight
350mm x 150mm
2.5kg
3.5kg
ASSEMBLING AND PREPARING
(This feature is not available for all models.)
Use
the anchors for wall material of concrete, light
concrete, strong natural stone, soft natural stone
masonry brick and hallow block that do not crack.
Wall mount screw
5
Please follow the below direction
- Check the material of the wall and the thickness of the
finishing.
- When installing the product on wall material not
designated, install the product so that each fixated
location can withstand the pull out load of 70 kgf (686 N)
and shear load of 100 kgf (980 N) or above.
- Use the Ø8 mm drill bit for concrete and hammer
(Impact) drill.
1
2
Wall mount anchor
3
4
6
1 Use a drill bit Ø8 mm to drill a hole for the anchor
location within a depth of 80 mm - 100 mm.
2 Clean the drilled hole.
3 Insert the sealed anchor to the hole. (When inserting
the anchor, use a hammer.)
4 Set the wall mount on the wall by aligning to the
location of the hole. and, set the angle adjusting part
to face upward.
5 Align the wall mount bolt to the hole and tighten it.
Then, fasten the bolts at torque of 45 kgf/cm - 60
kgf/cm.
ENGLISH
ENG
How to attach to masonry walls
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
Use Cable Holder to neatly secure and position cables
together.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable holder,
as the cable holders may break, and injuries and
damage to the TV may occur.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the LN510* models.
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
gaming devices, and other external devices.
Antenna connection
Connect the TV to a wall antenna socket with an RF
cable (75 Ω).
ANTENNA
IN
NOTE
yy The external device connection may differ from
the model.
yy Connect external devices to the TV regardless of
the order of the TV port.
yy If you record a TV programme on a DVD recorder
or VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the correct
direction.
yy An antenna cable and converter are not supplied.
ENGLISH
ENG
MAKING CONNECTIONS
19
20
MAKING CONNECTIONS
ENGLISH
ENG
HDMI connection
Component connection
Transmits the digital video and audio signals from an
external device to the TV. Connect the external device
and the TV with the HDMI cable as shown.
Transmits analogue video and audio signals from an
external device to the TV. Connect the external device
and the TV with a component cable as shown.
Choose any HDMI input port to connect. It does not
matter which port you use.
IN
1
2
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
DVD/ Blu-Ray / HD Cable
Box / HD STB
L
HDMI
VIDEO
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
R
AUDIO
NOTE
yy It is recommended to use the TV with the HDMI
connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable.
yy High Speed HDMI™ Cables are tested to carry
an HD signal up to 1080p.
yy Supported HDMI Audio format : Dolby Digital(Up
to 48kHz), PCM(Up to 192 kHz, 32k/44.1k/48k/8
8k/96k/176k/192k) *DTS Not Supported.
DVD/ Blu-Ray / HD Cable Box
NOTE
yy If cables are not installed correctly, it could cause
this image to display in black and white or with
distorted colours.
MAKING CONNECTIONS
USB connection
Transmits analogue video and audio signals from an
external device to the TV. Connect the external device
and the TV with the composite cable as shown.
Connect a USB storage device such as a USB flash
memory, external hard drive, or a USB memory card
reader to the TV and access the USB menu to use
various multimedia files.
USB IN
AV IN 2
AUDIO OUT
USB
(*Not Provided)
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
DVD/ Blu-Ray / HD Cable Box / VCR
ENGLISH
ENG
Composite connection
21
22
MAKING CONNECTIONS
ENGLISH
ENG
Audio System connection
Use an external audio system instead of the built-in
speaker.
NOTE
yy If you use an optional external audio device
instead of the built-in speaker, set the TV speaker
feature to off.
External Stereo Connection
Use to connect to an external amplifier, or surround
sound system.
AUDIO OUT
AV IN 2
(*Not Provided)
L
R
AUDIO IN
External Stereo
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
ENGLISH
ENG
REMOTE CONTROL
and
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
TV
INPUT
Q.MENU
PICTURE
1
4
7
LIST
SOUND
2
5
8
0
3
6
9
Q.VIEW
FAV
P
MUTE
TIME
REVEAL
UPDATE
HOLD
SETTINGS
1
EXIT
TEXT
2
INDEX
(POWER)
TV
Turns the TV on or off.
Q.MENU
Accesses the Quick menus.
PICTURE
Changes the image mode.
SOUND
Changes the sound mode.
INPUT
23
Returns to the TV viewing from any mode.
Changes the input source.
Number buttons
Enters numbers.
LIST
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
FAV
Accesses your favourite programme list.
I/II
Selects the sound output.
MUTE
Mutes all sounds.
Adjusts the volume level.
P
Scrolls through the saved programmes.
PAGE
SETTINGS
Moves to the previous or next screen.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
OK
BACK
Selects menus or options and confirms your input.
EXIT
Clears on-screen displays and return to TV viewing.
1 TELETEXT BUTTONS
Control buttons
(
)
These buttons are used for teletext.
2 Coloured buttons
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Accesses the main menus.
Returns to the previous level.
Controls the USB menus.
24
WATCHING TV
ENGLISH
ENG
WATCHING TV
Turning the TV on for the first
time
When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize
the basic settings.
1 Connect the power cord to a power outlet. The Power
indicator turns red and the TV switches to Standby
mode.
2 In Standby mode, press the power button on the
remote control or local key to turn the TV on. The Initial
setting screen appears if you turn the TV on for the first
time.
NOTE
yy You can also access Initial Setting by accessing
OPTION in the main menu.
3 Follow the on-screen instructions to customize your
TV settings according to your preferences.
Selects a language to display.
Language

Mode Setting

Time Setting

Auto Tuning
Selects Home Use for the
home environment.
Selects the time zone and
daylight saving.
Scans and saves available
programmes automatically.
NOTE
yy To display images in the best quality for your home
environment, select Home Use.
yy Store Demo is suitable for the retail environment.
yy If you select Store Demo, any customized settings
will switch back to the default settings of Store
Demo in 5 minutes.
4 When the basic settings are complete, press the
OK.
NOTE
yy If you do not complete the Initial setting, it will appear
whenever the TV turns on.
yy Disconnect the power cord from the power outlet when
you do not use the TV for a long period of time.
5 To turn the TV off, press the power button on the
remote control.
Watching TV
1 In Standby mode, press
(POWER) to turn the TV
on.
2 Press INPUT and select TV.
3 To turn the TV off, press
(POWER).
The TV switches to Standby mode.
Managing programmes
Automatically setting up programme
Use this to automatically find and store all available
programmes.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP and press OK.
2 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
3 Press the Navigation buttons to scroll to
To Start and select To Start to begin auto tuning.
The TV scans and saves available programmes
automatically.
4 When you return to the previous menu, press
ꕣ (BACK).
WATCHING TV
Manual Tuning lets you manually tune and arrange the
stations in whatever order you desire.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number buttons to
select the desired programme number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
10 Press the Navigation buttons and then select the
desired channel number with the Navigation buttons
or Number buttons.
11 Press the Navigation buttons to scroll to
Search.
12 Press the Navigation buttons to scroll and start
Searching.
13 Press the OK to store it.
14 When you return to the previous menu, press
ꕣ (BACK).
NOTE
yy To store another programme, repeat steps 3 to 13.
Assigning a station name
You can assign a station name with five characters to
each programme number.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to select
the position and make your choice of the second
character, and so on. You can use an the alphabet
A to Z, the number 0 to 9, +/ -, and blank and press
OK.
5 Press the OK to store it.
6 When you return to the previous menu, press
ꕣ (BACK).
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for the best
picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu, press
ꕣ (BACK).
ENGLISH
ENG
Manually setting up programme
25
26
WATCHING TV
ENGLISH
ENG
Editing your programme list
Using additional options
When a programme number is skipped, it means that you
will be unable to select it using P
button during TV
viewing.
If you wish to select the skipped programme, directly
enter the programme number with the NUMBER buttons
or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
Adjusting aspect ratio
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to Programme
Edit.
3 Edit programmes using the following buttons.
Button
Red button
Yellow button
Blue button
Description
Deletes a programme.
Press the Red button twice. The
selected programme is deleted, all the
following programmes are shifted up
one position.
Moves a programme.
Press the Yellow button again to
release this function.
Selects a programme number to be
skipped. Press the Blue button again
to release the skipped programme.
4 When you return to the previous menu, press
ꕣ (BACK).
Selecting a programme on the programme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired
programme and press OK.
3 When you return to the previous menu, press LIST.
NOTE
ou may find some blue programmes. They have
yy Y
been set up to be skipped by auto programming
or in the programme edit mode.
yy Some programmes with the programme number
shown in the programme list indicate there is no
station name assigned.
Resize an image to view at its optimal size by pressing
Q.MENU or accessing Aspect Ratio in the PICTURE
menu.
NOTE
yy The available ratio varies depending on the input
source.
- 16:9: Resizes images to fit the screen width.
- Just Scan: Displays video images in the origi-
nal size without removing parts of the edge of
the image. (This function works in Component/
HDMI (720P/1080i/1080p) Mode.)
NOTE
yy If you select Just Scan, you may see image
noises at the edge of the original signal.
- Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
27
WATCHING TV
Using the input list
ENGLISH
ENG
- 4:3: Resizes images to the previous standard 4:3.
Selecting an input source
1 Press INPUT to access the input sources.
-The connected device displays on each input
source.
- 14:9 : You can view a picture format of 14:9
or a general TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way as
in 4:3, but is moved to the up and down.
2 Press the Navigation buttons or input button to scroll
to one of the input sources and press OK.
yyImage shown may differ from your TV.
INPUT
Move
OK
Move
OK
TV
AV1
AV2
Component
HDMI1
HDMI2
- Zoom : Formats an image to fit the screen
width. The top and bottom of the image may
not appear.
Input source
TV
Description
Watch TV over the air and cable
broadcast.
AV
Watch video from a VCR or other
external devices.
Component
Select it when using the DVD or the
Digital set-top box depends on connector.
Watch video from a HTS or other high
definition devices.
HDMI
- Cinema Zoom 1 : Formats an image to the
cinemascope ratio, 2.35:1.
To change the ratio of the cinema zoom,
press < or > and its range is from 1 to 16.
NOTE
yy If you enlarge or reduce an image, the image may
be distorted.
28
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
(Depending on model)
yyImage shown may differ from your TV.
Connecting USB storage devices
Connect USB storage devices (external HDD, USB
memory) to the TV and use multimedia features (See
“Browsing files” on p.29).
Connect a USB flash memory or USB memory card
reader to the TV as shown on the following illustration.
USB IN
To disconnect a USB storage device,
make sure to end the connection properly to prevent
damages to the TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and
press OK.
3 Disconnect the USB storage device only when the
message says that it is safe to remove.
CAUTION
yyDo not turn the TV off or remove a USB storage
device while the USB storage device is connected
to the TV, as this could result in loss of files or
damage to the USB storage device.
yyBack up your files saved on a USB storage
device frequently, as you may lose or damage
the files and this may be not covered by the
manufacturer’s warranty.
Tips for using USB storage devices
yy Only a USB storage device is recognizable.
yy If the USB storage device is connected through a
USB hub, the device is not recognizable.
yy A USB storage device using an automatic recognition
programme may not be recognized.
yy A USB storage device which uses its own driver may
not be recognized.
yy The recognition speed of a USB storage device may
depend on each device.
yy Please do not turn off the TV or unplug the USB
device when the connected USB storage device is
working. When such device is suddenly separated
or unplugged, the stored files or the USB storage
device may be damaged.
yy Please do not connect the USB storage device which
was artificially manoeuvred on the PC. The device
may cause the product to malfunction or fail to be
played. Never forget to use only a USB storage
device which has normal music files, image files or
movie files.
yy Please use only a USB storage device which was
formatted as a FAT16, FAT32, NTFS file system.
yy Please connect a USB storage device with the cable
offered by the device maker.
yy Some USB storage devices may not be supported or
operated smoothly.
yy Be sure to back up important files since data stored
in a USB memory device may be damaged. We will
not be responsible for any data loss.
yy If a USB memory device is connected to a USB multicard reader, its volume data may not be detected.
yy If the USB memory device does not work properly,
disconnect and reconnect it.
yy How fast a USB memory device is detected differs
from device to device.
yy The recommended capacity is 1 TB or less for a
USB external hard disk and 32 GB or less for USB
memory.
yy Any device with more than the recommended
capacity may not work properly.
yy USB storage devices below USB 2.0 are supported
as well. But they may not work properly in the movie
list.
yy Maximum of 999 folders or files can be recognized
under one folder.
yy If there are a lot of folders or files all within one folder,
the device may not be able to access these properly.
yy For external USB HDDs, it is recommended that you
use devices with a rated voltage of less than 5 V and
a rated current of less than 500 MA.
ENTERTAINMENT
Access the photo, music, or movie lists and browse files.
1 Connect a USB storage device.
2 Press SETTINGS to access the main menus.
3 Press the Navigation buttons to scroll to USB and
press OK.
4 Press Navigation buttons to scroll to PHOTO LIST,
MUSIC LIST or MOVIE LIST and press OK.
PHOTO LIST MUSIC LIST
3
PHOTO LIST
GUU.JPG
3872x2592, 2604KB
1
Up Folder
09/15/2012
KY101
04/03/2012
KY104
10/12/2012
09/03/2012
KY105
11/27/2012
GUU
11/27/2012
JMJ005
11/27/2012
JMJ002
11/27/2012
JMJ006
11/27/2012
JMJ003
11/27/2012
JMJ007
11/27/2012
JMJ004
11/27/2012
JMJ008
11/27/2012
ꔉ PopUp Menu
ꔵ Move Page
6
4
Page 1/1
USB Device
No Marked
DriveA
Free Space 4 GB
Title
Duration
5
2
00:00 / 01:34
Up Folder
ꔉ PopUp Menu
ꔂ Move
꘩ Option
ꘂ Mark
3
MOVIE LIST
Top Folder
DriveA
6
ꔵ Move Page
ꕯ Exit
4
Page 1/1
Free Space 4 GB
Title
Duration
DriveA
5
4 folder(s), 2 file(s)
Up Folder
ꔂ Move
ꔉ PopUp Menu
ꘂ Mark
No.
ꔵ Move Page
ꕯ Exit
Description
1
Moves to the upper level folder.
2
Preview: Displays the thumbnail/folder name of
the file in the selected folder.
3
Current page/Total pages
Supported file format
JPEG
Baseline : 64 x 64 to 8192 x 8192
Progressive : 64 x 64 to 1024 x 768
yyYou can play JPEG files only.
yyNon-supported files are displayed in
the form of predefined icon.
Music
MP3
Bit rate 32kbps to 320kbps
yySampling rate MPEG1 Layer3 : 32
kHz, 44.1 kHz, 48 kHz
yySampling rate MPEG2 Layer3 : 16
kHz, 22.05 kHz, 24 kHz
yySampling rate MPEG2.5 Layer3 : 8
kHz, 11.025 kHz, 12 kHz
Movie
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,
TS,TRP,TP,ASF,WMV,FLV)
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.
vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.
wmv/*.flv/*.avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))
supporting file
Video format : DivX3.11, DivX4.12, DivX5.
x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02,
Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Audio format : Dolby Digital, Mpeg, MP3,
LPCM, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
USB Device
No Marked
2
1
Type
Photo
5
ꕯ Exit
3
ꕗ
Supported file format
Free Space 4 GB
KY103
KY102
ꔂ Move
1
Available buttons on the remote control
USB Device
No Marked
ꘂ Mark
MUSIC LIST
Contents under the folder focused on 1
MOVIE LIST
Up Folder
2
Total number of marked files
4
Page 1/1
DriveA
4
5
6
6
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is
the subtitle format used in DivX6 files)
ENGLISH
ENG
Browsing files
29
30
ENTERTAINMENT
ENGLISH
ENG
Viewing photos
View image files saved in a USB storage device. The
displays on the screen may differ from the model.
6 The following options are available while viewing
photos.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to USB and
press OK.
3 Press the Navigation buttons to scroll to PHOTO LIST
and press OK.
4 Press the Navigation buttons to scroll to a folder/file
you want and press OK.
5 View photos by using the following menus/buttons.
PHOTO LIST
DriveA
Page 1/1
3872x2592, 2604KB
Up Folder
ꔂ Move
No Marked
KY103
09/15/2012
KY101
04/03/2012
KY104
10/12/2012
KY102
09/03/2012
KY105
11/27/2012
GUU
11/27/2012
JMJ005
11/27/2012
JMJ002
11/27/2012
JMJ006
11/27/2012
JMJ003
11/27/2012
JMJ007
11/27/2012
JMJ004
11/27/2012
JMJ008
ꘂ Mark
Option
�
�
꘩ Option
Hide
BGM
Turns the background music on or off. To
set the background music folder, select
Option.
11/27/2012
Description
Scrolls through the files.
OK
Views the highlighted file or enters the
mark mode.
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos
saved in the current folder display during
a slideshow.
To set a slideshow speed, select Option.
ꕯ Exit
(Rotate)
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Moves to the previous or next page.
Enters the mark mode.
Menu
ꔡ
Slideshow
ꔵ Move Page
Navigation
button
P
FAV
ꔋ
2/13
BGM
Free Space 4 GB
ꔉ PopUp Menu
Button
�
USB Device
Up Folder
GUU.JPG
ꔊ
Slide show
Description
View
Views the selected photo.
Mark All
Selects all files
Close
Exits the Mark Mode.
NOTE
yyNon-supported files are displayed the preview
image by icon only
.
yyAbnormal files are displayed in the form of bitmap
.
Hide
Hides the option window.
To display the options, press OK.
Q.MENU options for photo list
1 Press Q.MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to Set photo
view. and press OK.
3 Press the Navigation buttons to scroll to one of the
following options and press OK.
Set photo view.
Option
Slide Speed
Description
Selects a slideshow speed (Fast,
Normal, Slow).
Music Folder Selects a music folder for the
background music.
ENTERTAINMENT
t
w
v
Allows you to change Video presets. (See p.36).
Set audio.
or
Allows you to change Audio presets. (See p.38).
EXIT
Listening to music
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to USB and
press OK.
3 Press the Navigation buttons to scroll to MUSIC
LIST and press OK.
4 Press the Navigation buttons to scroll to a folder/file
you want and press OK.
5 Play music by using the following menus/buttons.
MUSIC LIST
Page 1/1
DriveA
ꕗ
USB Device
No Marked
Free Space 4 GB
Title
Duration
ꕌ or ꕍ
Pauses or resumes playback
Skips to the next file
Skips to the previous file
When playing,
When you press the
button, the previous music file will be played.
When you press the
button, the next
music file will be played.
When you press the EXIT button, only
the music will be stopped and the player
will not return to normal TV viewing.
When using the ꕌorꕍ button during
playback a cursor indicating the position
can be played.
Q.MENU options for music list
1 Press Q.MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to music list
option and press OK.
3 Press the Navigation buttons to scroll to one of the
following options and press OK.
00:00 / 01:34
Up Folder
ꔂ Move
ꘂ Mark
Button
ꔉ PopUp Menu
꘩ Option
ꔵ Move Page
ꕯ Exit
Description
Navigation
button
Scrolls through the files.
OK
Views the highlighted file or enters the
mark mode.
P
FAV
Moves to the previous or next page.
Enters the mark mode.
Menu
Description
Play
Plays the selected music file.
Play with
Photo
Displays photos during playback.
Mark All
Selects all files.
Close
Exits the Mark Mode.
6 Control playback by using the following
buttons.
Button
r
s
Description
NOTE
yy Option values changed in MOVIE LIST does not
affect PHOTO LIST and MUSIC LIST.
yy Option value changed in PHOTO LIST and
MUSIC LIST are changed likewise in PHOTO
LIST and MUSIC LIST excluding MOVIE LIST.
Set audio.
Allows you to change Audio presets. (See p.38).
NOTE
yyThe TV will not play copy protected files.
yyIf the TV is not in use for some time during
playback, the information box as a screensaver
will appear to prevent image burn. To return to the Music list screen,
press OK or ꕣ (BACK).
File name
Musics
001.mp3
Stops playback
Plays a music file
ꕖ 00:53 / 05:31
Time elapsed /Duration
ENGLISH
ENG
Set video.
31
32
ENTERTAINMENT
ENGLISH
ENG
Viewing movies
Button
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to USB and
press OK.
3 Press the Navigation buttons to scroll to MOVIE
LIST and press OK.
4 Press the Navigation buttons to scroll to a folder/file
you want and press OK.
5 Play movie by using the following menus/buttons.
r
s
t
v
w
Q.MENU
MOVIE LIST
Page 1/1
DriveA
Up Folder
USB Device
No Marked
Free Space 4 GB
Title
Duration
DriveA
EXIT
<>
4 folder(s), 2 file(s)
Up Folder
ꔂ Move
ꔉ PopUp Menu
ꔵ Move Page
ꘂ Mark
Button
Description
Scrolls through the files.
OK
Views the highlighted file or enters the
mark mode.
P
FAV
Moves to the previous or next page.
Enters the mark mode.
Menu
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Play
Mark All
Mark all movie files on the screen.
Delete
Deselect all marked movie files.
Close
Exit the Mark Mode.
6 Control playback by using the following buttons.
↓ 02:10
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Scans forward in a file
Show the Option menu.
Hide the menu on the full-sized screen.
Return to normal TV viewing.
Skips to specific points in a file during
playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
ꕯ Exit
Navigation
button
ꔋ
BACK
Description
00:22:05
꘩ Option
Tips for using playing video files
yySome user-created subtitles may not work
properly.
yySome special characters are not supported in
subtitles.
yyHTML tags are not supported in subtitles.
yySubtitles in languages other than the supported
languages are not available.
yyChanging font and colour in subtitles is not
supported.
yySubtitles in languages other than one specified
are not supported.
yyVideo files with subtitle files of 1 MB or larger may
not be played properly.
yyThe screen may suffer temporary interruptions
(image stoppage, faster playback, etc.) when the
audio language is changed.
yyA damaged movie file may not be played correctly,
or some player functions may not be usable.
yyMovie files produced with some encoders may not
be played correctly.
yyIf the video and audio structure of recorded file is
not interleaved, either video or audio is outputted.
yyHD videos with a maximum of
1920x1080@25/30P or 1280x720@50/60P are
supported, depending on the frame.
yyVideos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P may
not work properly depending on the frame.
yyMovie files other than the specified types and
formats may not work properly.
yyMax bitrate of playable movie file is 20 Mbps. (only,
Motion JPEG : 10 Mbps)
ENTERTAINMENT
Video options
1 Press Q. MENU to access the Pop-Up menus.
Menu
Description
Picture Size
Selects your desired picture
format during movie play.
Audio
Language
Changes the Language Group of the
audio during movie play. Files
with a single audio track cannot be
selected.
Subtitle
Language
Turn on/off the subtitle.
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by
steps of 0.5 secs during movie play.
Code Page
Support Language
Latin1
English, French, Spanish,
Portuguese, Malaysia,
Indonesia
Cyrillic
Russian
Thai
Thai
Hebrew
Hebrew
Arabic
Arab, Parsi, Krudish
Unicode(UTF-16)
Vietnamese language
2 Press the Navigation buttons to scroll to Set Video
Play, Set Video or Set Audio and press OK.
NOTE
yyOption values changed in MOVIE LIST does not
affect PHOTO LIST and MUSIC LIST.
yyOption value changed in PHOTO LIST and MISIC
LIST are changed likewise in PHOTO LIST and
MUSIC LIST excluding MOVIE LIST.
yyWhen replaying the video file after stopping, you
can play from where it stopped previously.
When you select the Set Video Play
1 Press the Navigation buttons to scroll to show
the Picture Size, Audio Language, Subtitle
Language.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
NOTE
yyOnly 10,000 of sync blocks can be supported
within the subtitle file.
yyWhen playing a video, you can adjust the Picture
Size by pressing Q.MENU or accessing Aspect
Ratio in the PICTURE menu.
When you select the Set video,
1 Press the Navigation buttons to scroll to make
appropriate adjustments. (See p.36)
When you select the Set audio,
1 Press the Navigation buttons to scroll to show the
Sound Mode, Auto Volume, Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments. (See p.38)
ENGLISH
ENG
yyWe do not guarantee smooth playback of profiles
encoded level 4.1 or higher in H.264/AVC.
yyDTS Audio codec is not supported.
yyA movie file more than 30 GB in file size is not
supported for playback. The file size limit is
dependent on the encoding environment.
yyA DivX movie file and its subtitle file must be
located in the same folder.
yyA video file name and its subtitle file name must
be identical for it to be displayed.
yyPlaying a video via a USB connection that doesn’t
support high speed may not work properly.
yyFiles encoded with GMC(Global Motion
Compensation) and Qpel (Quarterpel Motion
Estimation) may not be played.
yyWhen you are watching the movie by Movie List
function, you can adjust an image by Energy
Saving and AV Mode key on the remote control.
User setup for each image mode does not
operate.
yyTrick Mode does not support other functions than
if video files do not have index information.
yyVideo file names that contain special characters
may not be playable.
33
34
ENTERTAINMENT
ENGLISH
ENG
DivX® VOD Guide
DivX® VOD Registration
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10 digit
DivX registration code from your device at www.divx.
com/vod.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to USB and
press OK.
3 Press the Navigation buttons to scroll to DivX(R)
VOD and press OK.
4 Press the Navigation buttons to scroll to
Registration and press OK .
5 View the registration code of your TV.
You must register your device to
play DivX(R) protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
6 When you are finished, press EXIT. When you
return to the previous menu, press ꕣ (BACK).
NOTE
yyMovie files are supported as follows
yyResolution : under 720x480, 720x576 WxH
pixels
yyFrame rate : under 30 frames/sec(720x480),
under 25 frames/sec(under 720x576)
yyVideo Codec : MPEG 1, MPEG 2, MPEG 4, H.264/
AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid
1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson
H.263/H.264.
DivX® VOD Deregistration
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.com/
vod.
NOTE
yy Once the deregistration is executed, you must
register your device again to see DivX® VOD
contents.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to USB and
press OK.
3 Press the Navigation buttons to scroll to DivX(R)
VOD and press OK.
4 Press the Navigation buttons to scroll to
Deregistration and press OK.
5 Press the Navigation buttons to select Yes to
confirm.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
6 When you are finished, press EXIT. When you
return to the previous menu, press ꕣ (BACK).
35
CUSTOMIZING TV SETTING
yyImage shown may differ from your TV.
Accessing main menus
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to one of the
following menus and press OK.
3 Press Navigation buttons to scroll to the setting or
option you want and press OK.
4 When you are finished, press EXIT.
Menu
Description
SETUP
Customizing Settings
SETUP Settings
1 Press SETTINGS and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
yyImage shown may differ from your. TV.
SETUP
PICTURE
Adjusts the image size, quality, or effect.
AUDIO
Adjusts the sound quality, effect, or volume level.
TIME
Sets the time, date, or timer
feature.
OPTION
Customizes the general settings.
Setting
Auto Tuning
LOCK
Locks or unlocks programmes
and programmes
Manual Tuning
INPUT
Views the input sources
with their labels
Programme Edit
USB
OK
OK
Auto Tuning
Manual Tuning
Programme Edit
Sets up and edit programmes.
Displays photo and play
music, movie content stored
on your USB.
Move
Move
The available programme settings are described in the
following:
Description
Tunes and stores all available programmes through
antennas inputs (See p.24).
Tunes and stores the programmes you want manually (See p.25).
Edits programmes
(See p.26).
ENGLISH
ENG
CUSTOMIZING TV SETTING
36
CUSTOMIZING TV SETTING
ENGLISH
ENG
PICTURE Settings
1 Press SETTINGS and the Navigation buttons to
scroll to PICTURE.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
yyImage shown may differ from your TV.
PICTURE
Move
Aspect Ratio
ꕊ Energy Saving
Picture Mode
Move
: 16:9
Setting
Picture Mode
Description
Selects one of the preset image or
customizes options in each mode for
the best TV screen performance. You
are also able to customize advanced
options of each mode.
Mode
Vivid
OK
OK
: Off
: Standard
Standard
•BackLight
70
•Contrast
90
•Brightness
50
•Sharpness
70
•Colour
60
•Tint
0
R
G
•Colour Temperature 0
W
C
Cinema
•Advanced Control
•Reset
Sport
The available picture settings are described in the
following.
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.26).
Energy Saving Reduces the power consumption by
adjusting the screen brightness.
Option
Off
The Energy Saving is
off
Minimum/
Medium/
Maximum
Selects the brightness
level.
Screen off
The screen turns off in
3 seconds.
NOTE
yyWhen you select Screen
Off, the screen will be
turned off in 3 seconds and
Screen Off will start.
yyIf you adjust “Energy
Saving- Maximum”,
Backlight feature will not
work.
Game
Adjusts the video
image for the retail
environment by enhancing the contrast,
brightness, colour,
and sharpness.
Adjusts the image for
the normal environment.
Optimizes the video
images for a cinematic look to enjoy
movies as if you are in
a movie theatre.
Optimizes the video
image for high and
dynamic actions by
emphasizing primary
colours such as white,
grass, or sky blue.
Optimizes the video
image for a fast gaming screen such as
PCs or games.
CUSTOMIZING TV SETTING
Setting
Backlight
Advanced image options (Depending on model)
Description
Adjusts the brightness of the
screen by controlling the LCD
backlight. If you decrease the
brightness level, the screen
becomes darker and the
power consumption will be
reduced without any video
signal loss.
Setting
Dynamic Contrast
Description
Adjusts the contrast to keep it
at the best level according to
the brightness of the screen.
The picture is improved by
making bright parts brighter
and dark parts darker.
Dynamic Colour
Adjusts screen colours so
that they look livelier, richer
and clearer. This feature
enhances hue, saturation and
luminance so that red, blue
and green white look more
vivid.
Contrast
Increases or decreases the
gradient of the video signal.
You may use Contrast when
the bright part of the picture is
saturated.
Brightness
Adjusts the base level of the
signal in the picture.
Noise Reduction
Reduces screen noise without
compromising video quality.
Sharpness
Adjusts the level of crispness
in the edges between the light
and dark areas of the picture.
The lower the level, the softer
the image.
Gamma
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between
red and green levels.
Colour Temperature
Choose one of three
automatic colour adjustments.
Set to warm to enhance
hotter colours such as red, or
set to cool to see less intense
colours with more blue.
You can control red, green,
blue to adjust colour details.
You can adjust brightness of
dark area and middle gray
level area of the picture.
»»Low: Make the dark and
middle gray level areas
brighter.
»»Medium: Express the
original picture level.
»»High: Make the dark and
middle gray level area
darker.
Black Level
ets black level of the screen
S
to proper level. This function
is available in the following
modes: RF, AV or HDMI.
»»Low: The reflection of the
screen gets darker.
»»High: The reflection of the
screen gets brighter.
Motion Eye Care
Adjusts screen brightness to
prevent eye glare.
Film Mode
Makes video clips recorded in
film look more natural.
This feature operates only
in 480i / 576i / 1080i /
1080p(24Hz) Resolution.
Colour Gamut
Advanced Control
Maximizes the utilization of
colour to increase colour
quality.
Standard: Displays standard
set of colours.
Wide: Increase number of
colours used.
Edge Enhancer
Shows clearer and distinctive
yet natural edges of the video.
Advanced Control
Customizes the advanced
options.
Reset
Restores the options of each
mode to the factory default.
ENGLISH
ENG
Basic image options
37
38
CUSTOMIZING TV SETTING
ENGLISH
ENG
AUDIO Settings
Setting
1 Press SETTINGS and the Navigation buttons to
scroll to AUDIO.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
Mode
Standard Select when you want
standard-quality sound.
yyImage shown may differ from your TV.
AUDIO
Move
Auto Volume
Balance
Sound Mode
Move
: On
0
L
50
•Bass
50
OK
Description
Auto Volume Activates the Auto Volume feature
to keep the volume level consistent
whenever you change programmes.
The volume level may not be consistent
due to different signal conditions of
broadcasting stations.
Balance
Cinema
Select when you watch
movies.
Sport
Select when you watch
sports events.
Game
Select when you play
games.
Option
: On
The available audio settings are described in the
following.
Setting
Select when you listen to
music.
R
•Reset
TV Speaker
Music
OK
: Standard
•Treble
Description
Sound Mode Selects one of the preset sound modes
or customizes options in each mode.
Adjust balance between the left and
right speakers according to your room
environment.
TV Speaker
Treble
Controls the dominant
sounds in the output. When
you turn up the treble, it will
increase the output to the
higher frequency range.
Bass
Controls the softer sounds
in the output. When you
turn up the bass, it will
increase the output to the
lower frequency range.
Reset
Resets the sound mode to
the default setting.
Turns off the internal speaker of the TV
when using an external Hi-Fi system.
This feature may not be applied based on country
broadcasting circumstance.
Stereo/Dual Reception
When a programme is selected, the sound information
for the station appears with the programme
number and station name.
Press I/II button to select the Multi Audio menu.
Broadcast
Mono
Stereo
Dual
NICAM
On Screen Display
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
yyMono sound selection
If the stereo signal is weak in stereo reception, you
can switch to mono. In mono reception, the clarity of
sound is improved.
yyLanguage selection for dual language broadcast
If a programme can be received in two languages
(dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
39
TIME Settings
1 Press SETTINGS and the Navigation buttons to
scroll to TIME.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
yyImage shown may differ from your TV.
TIME
DUAL I
Sends the primary broadcast language
to the loudspeakers.
DUAL I I
Sends the secondary broadcast language to the loudspeakers.
DUAL I+I I Sends a separate language to each
loudspeaker.
Move
Move OKOK
Clock
Off Time
On TIme
Sleep Timer
: Off
: Off
: Off
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be
received.
Sound output can be selected according to the type of
broadcast received.
1 When NICAM mono is received, you can select
NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can select
NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select
NICAM DUAL I, NICAM DUAL II or NICAM DUAL
I+II or FM MONO.
The available audio settings are described in the
following.
Setting
Sets the time.
Off Time/On Time
Sets the time to turn on or off
the TV automatically. To use
this function, you should set the
current time and date in advance.
NOTE
yyIf you do not press any
button within 2 hours
after the TV turns
on by the On Time
feature, the TV enters
the Standby mode
automatically.
yyIf you set both Off time
and On time features to
the same time, the Off
time feature overrides
the On time feature.
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select output
sound for the left and right loudspeakers.
Select the sound output.
L+R:
L+L:
R+R:
Audio signal from audio L input is sent to the
left loudspeaker and audio signal from audio R
input is sent to the right loudspeaker.
Audio signal from audio L input is sent to left and
right loudspeakers.
Audio signal from audio R input is sent to left and
right loudspeakers.
Description
Clock
Sleep Timer
Sets the length of time until the
TV to turns off. When you turn the
TV off and turn it on again, the
Sleep timer feature will be set to
off.
ENGLISH
ENG
ry
CUSTOMIZING TV SETTING
40
CUSTOMIZING TV SETTING
ENGLISH
ENG
LOCK Settings
OPTION Settings
1 Press SETTINGS and the Navigation buttons to
scroll to OPTION.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
yyImage shown may differ from your TV.
OPTION
Move
Move OKOK
Language(Language)
Input Label
Initial Setting
yyImage shown may differ from your TV.
LOCK
Description
Selects a desired language.
Menu
Selects a language
for the display text.
Input Label
Indicates which device is connected
to which input port.
Initial Setting
Customizes the TV settings to suit
your preference. The initial setup
screen will appear when you turn on
the TV for the first time.
Home Use
Selects it for the
Home environment.
Store Demo Selects it for the retail
environment.
Move
Move OKOK
Lock System
Set Password
Block Programme
Input Block
: Home Use
The available audio settings are described in the
following.
Setting
Language
1 Press SETTINGS and the Navigation buttons to
scroll to LOCK.
2 Press the Navigation buttons to scroll to the setting
or option you want and press OK.
3 When you return to the previous menu, press
ꕣ (BACK).
: Off
The available audio settings are described in the
following.
Setting
Lock System
Description
Activates or deactivates the lock
system.
Set Password
Changes the 4-digit password. The
default PIN is “0 0 0 0”.
Block
Programme
Blocks the programmes that contain
inappropriate contents for children by
pressing the Blue button. The Lock
icon appears in front of the blocked
programmes. The programmes can
be selected but the screen blank and
the audio is muted.
Input Block
Blocks the input sources.
TELETEXT
yyThis feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the minute information on news,
weather, television programmes, share prices and many
other topics.
The teletext decoder of this TV can support the SIMPLE
and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly
entering the corresponding page number. FASTEXT are
more modern methods allowing quick and easy selection
of teletext information.
Teletext Service - only via Digital Tuner access where TV
broadcast available.
Switch On/Off
Press the TEXT button to switch to teletext. The initial
page or last page viewed appears on the screen.
Two page numbers, TV station name, date and time are
displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode reappears.
Simple Text
Page selection
1 Enter the desired page number as a three digit
number with the NUMBER buttons. If during
selection you press a wrong number, you must
complete the three digit number and then re-enter
the correct page number.
2 The P∧∨ button can be used to select the
preceding or following page.
Programming a colour button in
LIST mode
If the TV is in SIMPLE text or FASTEXT mode, press the
INDEX button to switch to LIST mode. Four teletext page
numbers of your choice can be colour coded and easily
selected by pressing the corresponding coloured button
on the remote control handset.
1 Press a coloured button.
2 Using the Number buttons, select the page you wish
to programme.
3 Press the OK button. The selected page is stored as
the selected page number, blinking once to confirm
this. From now on, you can select this page with the
same coloured button.
4 The three other coloured buttons are programmed in
this way.
Fastext
The teletext pages are colour coded along the bottom of
the screen and are selected by pressing the corresponding coloured button.
Page selection
1 Press the INDEX button to select the index page.
2 You can select the pages which are colour coded
along the bottom line with corresponding coloured
buttons.
3 AS with SIMPLE teletext mode, you can select a
page by entering its three digit page number with
the Number buttons in FASTEXT mode.
4 The P ∧∨ button can be used to select the
preceding or following page.
Special Teletext Function
Index
Select the each index page.
Time
When viewing a TV programme, select this menu to
display the time at the top right hand corner of the
screen.
In the teletext mode, press this button to select a sub
page number. The sub page number is displayed
at the bottom of the screen. To hold or change the
sub page, press the Red/Green, ∧∨ or NUMBER
buttons.
Hold
Stops the automatic page change which will occur if a
teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed
is, usually, shown on the screen below the time.
When this menu is selected the stop symbol is
displayed at the top left-hand corner of the screen
and the automatic page change is inactive.
Reveal
Select this menu to display concealed information,
such as solutions to riddles or puzzles.
Update
Displays the TV picture on the screen while waiting
for a new teletext page. The display will appear at the
top left hand corner of the screen. When the updated
page is available then display will change to the page
number. Select this menu again to view the updated
teletext page.
ENGLISH
ENG
TELETEXT
41
42
MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to
prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then
wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches
and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ,
to
yy Check if the batteries are still working and properly installed (
No image display and
no sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes
of inactivity.
).
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
32LN510*
39LN510*
42LN510*
32LN5100-TA
32LN510Y-TA
39LN5100-TA
39LN510Y-TA
42LN5100-TA
42LN510Y-TA
Dimensions
(W x H x D)
With stand (mm)
738.0 x 497.0 x 207.0
894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
Without stand(mm)
738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LN511*
39LN511*
42LN511*
32LN5110-TB
32LN511Y-TB
39LN5110-TB
39LN511Y-TB
42LN5110-TB
42LN511Y-TB
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
738.0 x 497.0 x 207.0
894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
Without stand(mm)
738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LN512*
39LN512*
42LN512*
32LN5120-TC
32LN512Y-TC
39LN5120-TC
39LN512Y-TC
42LN5120-TC
42LN512Y-TC
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
738.0 x 497.0 x 207.0
894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
Without stand(mm)
738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LN513*
39LN513*
42LN513*
32LN5130-TI
32LN513Y-TI
39LN5130-TI
39LN513Y-TI
42LN5130-TI
42LN513Y-TI
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
738.0 x 497.0 x 207.0
894.0 x 587.0 x 236.0
968.0 x 629.0 x 236.0
Without stand(mm)
738.0 x 449.0 x 79.0
894.0 x 537.0 x 79.0
968.0 x 579.0 x 79.0
Weight
With stand (kg)
7.0
9.7
10.7
Without stand (kg)
6.4
8.6
9.6
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
32LN515*
32LN5150-TA
32LN5150-TL
32LN515Y-TA
32LN515Y-TL
MODELS
Dimensions
(W x H x D)
With stand (mm)
738.0 x 497.0 x 212.0
Without stand(mm)
738.0 x 449.0 x 79.0
Weight
With stand (kg)
7.7
Without stand (kg)
6.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
ENGLISH
ENG
SPECIFICATIONS
43
44
SPECIFICATIONS
ENGLISH
ENG
Environment
condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Analogue TV
New Zealand, Singapore
Television System
Programme Coverage
Australia
Indonesia, Israel,
Myanmar, Sri Lanka
Vietnam, Malaysia
Iran, Algeria, Tunisia,
Digital model
Analogue model, India,
Thailand, South Africa, --
Television System
PAL/SECAM-B/G/D/K, PAL-I
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
Programme Coverage
B/B : VHF/UHF 0 to 75, CATV : 2 to 44
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
External Antenna Impedance
75 Ω
45
SPECIFICATIONS
Resolution
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component ports on the TV
Video output ports on DVD
player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
ENGLISH
ENG
Component port connecting information
HDMI-DTV supported mode
46
LICENSES
ENGLISH
ENG
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of
Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order
to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code,
locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
Download PDF

advertising