LG | 47LS4600-TA | LG 42LM5800 Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
LM58**
LM46**
LS46**
P/NO : MFL67466603 (1205-REV02)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
2
TABLE OF CONTENTS
28
TROUBLESHOOTING
3
LICENSES
29
SPECIFICATIONS
3
OPEN SOURCE SOFTWARE NOTICE
4
SAFETY INSTRUCTIONS
10
- Viewing 3D Imaging (Only 3D models)
12
INSTALLATION PROCEDURE
12
ASSEMBLING AND PREPARING
12
15
16
17
18
18
19
21
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
Tidying cables
Mounting on a table
Mounting on a wall
22
MAKING CONNECTIONS
22
23
23
24
24
25
25
25
25
Antenna connection
HDMI connection
DVI to HDMI connection
Component connection
Composite connection
RGB-PC connection
USB connection
Audio connection
- Digital optical audio connection
26
REMOTE CONTROL
27
USING THE USER GUIDE
28
MAINTENANCE
28
28
28
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust. y
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off. y
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely. y
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater. y
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables. y
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in. y
This may cause water damaged inside the Product and could give an electric
shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV. y
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices. y
yy
Otherwise, this may result in injury or damage to the product.
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children. y
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV. y
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.y
yy
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
yy
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.y
You may be electrocuted.y
(Depending on model)
Do not put or store inflammable substances near the product. There is a danger
yy
of combustion/explosion or fire due to careless handling of the inflammable
substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention. y
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something. y
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm. y
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate. y
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet. y
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion. y
yy
Fire or electric shock accident can occur. y
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product. y
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls. y
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported. y
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man. y
yy
This may create a fire hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 5 to 7 times the diagonal
yy
screen size when watching TV. y
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery. y
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries. y
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough. y
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.) y
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet. y
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel. y
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it. y
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables. y
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product. y
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology TFT product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product. y
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and colour of the panel depending on your
yy
viewing position(left/right/top/down). y
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking. y
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma). y
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel. y
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product. y
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy. y
Otherwise, this may result in injury.
9
10 SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double
images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the
symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
� Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
� Using modified 3D glasses may cause eye strain or image distortion.
� Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
� The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
ENGLISH
ENG
CAUTION
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.y
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
13
TV
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
Remote control and
batteries (AAA)
(See p. 26)
Owner’s manual
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Cinema 3D Glasses
The number of 3D glasses
may differ depending on
the model or country.
(Only 32/42/47/55LM58**,
47/55LM46**)
Cable holder
(Depending on model)
(See p. 18)
Power Cord
Stand Screws
8 EA, M4 x 20
(See p. 18)
Desk-mount Screw
(Only 32/42/47LM58**,
47LM46**,
32/42/47LS46**)
(See p. 19)
FREEZE
RATIO
Wall mount inner spacers
4EA
(See p.21)
or
Stand Body / Stand Base
(See p. 18)
Isolator
(Depending on model)
(See p.14)
ENGLISH
ENG
ENERGY AV MODE INPUT
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
CAUTION
yy Power Cord Installation Guide
-- If the power cord provided with TV looks like the below picture, please ensure that it is inserted in
the right direction.y
TV
Power Cord
Correct
Wrong
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection
or through other equipment with a connection to protective earthing - and to a cable distribution system
using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution
system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buying these items.
These devices only work with certain models.
AG-F2**, AG-F3**
Cinema 3D Glasses
The model name or design
may be changed depending
on the upgrade of product
functions,manufacturer’s
circumstances or policies.
Compatibility
32/42/47/55LM58**,
47/55LM46**
AG-F2**, AG-F3**
Cinema 3D Glasses
•
32/42/47LS46**
ENGLISH
ENG
Separate purchase
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
Screen
Remote control andy
intelligent sensors1
Power indicator
Speakers
OK
Touch
Button
SETTINGS
INPUT
Touch buttons2
Description
Scrolls through the saved programmes.
H
Adjusts the volume level.
H
OK
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menu, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.y
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.y
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.y
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ENGLISH
ENG
Lifting and moving the TV
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
CAUTION
1
M4 x 20
4EA
Stand Body
Front
NOTE
Stand Base
2
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)y
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
Top View
3
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Tidying cables
Use Cable Holder to neatly secure and position
cables together.
M4 x 20
cable holder
4EA
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
ASSEMBLING AND PREPARING
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20
20
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
(Only 32/42/47LM58**, 47LM46**,
32/42/47LS46**)
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
CAUTION
yy When adjusting the angle of the product,
watch out for your fingers.
-- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
ENGLISH
ENG
Mounting on a table
19
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.y
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.y
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.y
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase (Wall Mounting Bracket)
Model
32LM58**y
32LS46**
VESA (A x B)
Standard
screw
Number of
screws
Wall mount
bracket
200 x 200
M6
42/47/55LM58**y
47/55LM46**
42/47LS46**
400 x 400
M6
4
4
LSW200BX
LSW400BX
LSW220BX
CAUTION
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching a third-party wall mounting
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG
wall mounting bracket.
LSW420BX
Wall Mount Inner Spacer
A
B
ENGLISH
ENG
Mounting on a wall
21
22 MAKING CONNECTIONS
ENGLISH
ENG
MAKING
CONNECTIONS
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
This section on MAKING CONNECTIONS mainly
uses diagrams for the 32/42/47/55LM58** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
ANTENNA /
CABLE IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
MAKING CONNECTIONS
23
DVI to HDMI connection
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
AUDIO IN
(RGB/DVI)
3
Choose any HDMI input port to connect. It does
not matter which port you use.
/ DVI IN
1
2
/ DVI IN
1
2
(*Not Provided)
(*Not Provided)
HDMI
DVD/ Blu-Ray / HD Cable Box / HD STB / PC
NOTE
yy It is recommended to use the HDMI
connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy DTV Audio supported Codec: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
yy HDMI Audio supported format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported)
DVI OUT
AUDIO OUT
DVD/ Blu-Ray / HD Cable Box / PC
NOTE
yy Depending on the graphics card, DOS mode
video may not work if a HDMI to DVI Cable
is in use.
ENGLISH
ENG
HDMI connection
24 MAKING CONNECTIONS
Composite connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
AV IN
VIDEO
L/MONO AUDIO R
AV IN
VIDEO
2
L/MONO AUDIO R
PB
PR
L
R
PB
PR
L
AUDIO
VIDEO
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
VIDEO
RED
L
RED
WHITE
RED
BLUE
GREEN
VIDEO
WHITE
YELLOW
(*Not Provided)
L
R
RED
AUDIO
VIDEO
Y
1
WHITE
1
COMPONENT
IN
2
Y
YELLOW
COMPONENT
IN
ENGLISH
ENG
Component connection
R
AUDIO
R
AUDIO
VCR / DVD / Blu-Ray / HD Cable Box
DVD / Blu-Ray / HD Cable Box
NOTE
yy If cables are installed incorrectly, it could
case the image to display in black and white
or with distorted colour.
MAKING CONNECTIONS
Audio connection
Transmits the video signal from PC to the TV. To
transmit an audio signal, connect an audio cable.
You may use an optional external audio system
instead of the built-in speaker.
AUDIO IN
(RGB/DVI)
NOTE
yy If you use an optional external audio device
instead of the built-in speaker, set the TV
speaker feature to off.
RGB IN (PC)
Digital optical audio connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
(*Not Provided)
OPTICAL
DIGITAL
AUDIO OUT
RGB OUT (PC)
AUDIO OUT
PC
(*Not Provided)
USB connection
USB IN
Connect a USB storage device such as s USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
USB device
(*Not Provided)
OPTICAL
AUDIO IN
Digital Audio System
NOTE
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
ENGLISH
ENG
RGB-PC connection
25
26 REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
RATIO
INPUT
Selects Radio, TV and DTV programme.
Resizes an image.
Changes the input source.
Adjusts the brightness of the screen to reduce energy
consumption.
Accesses the saved programme list.
Returns to the previously viewed programme.
Accesses your favourite programme list.
Used for viewing 3D video.
(Only 32/42/47/55LM58**, 47/55LM46**)
Moves to the previous or next screen.
Accesses the main menus.
ENERGY
TV /
RAD
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Views the information of the current programme
and screen.
FAV
P
P
A
G
E
MUTE
3D OPTION
SETTINGS INFO
Q.MENU
Navigation buttons
(up/down/left/right)
OK
GUIDE
EXIT
2 TELETEXT
1
2
1 Coloured buttons
TEXT
3
T.OPT
SUBTITLE
BUTTONS
3 Control buttons
AV MODE
(
)
Accesses the Quick menus.
Used for viewing 3D video.
(Only 32/42/47/55LM58**, 47/55LM46**)
Scrolls through menus or options.
Moves to the previous or next screen.
Returns to the previous level.
Shows programme guide.
Clears on-screen displays and return to TV viewing.
These access special functions in some menus.
( : Red,
: Green,
: Yellow,
: Blue)
These buttons are used for teletext.
Recalls your preferred subtitle in digital mode.
Controls the MY MEDIA menus, or the SIMPLINK
compatible devices (USB,SIMPLINK).
Accesses the AV devices connected with the HDMI
cable through HDMI-CEC.
Opens the SIMPLINK menu.
Selects an AV mode.
USINGyTHEyUSERyGUIDE
27
ENGLISH
ENG
USING THE USER GUIDE
UseryGuideyallowsyyouytoymoreyeasilyyaccessytheydetailedyTVyinformation.
1y PressySETTINGSytoyaccessytheymainymenus.
2y PressytheyREDybuttonytoyaccessytheyCustomer
Supportymenus.
3y PressytheyNavigationybuttonsytoyscrollytoyUser
GuideyandypressyOK.
UseryGuide
1
PROGRAMMEySetting
PICTURE,ySOUNDySetting
OPTION
OPTIONy>yToysetylanguage
SETTINGy y yOPTIONy yLanguage
Youycanyselectytheylanguageyofytheymenuydisplayedyonytheyscreenyandythey
digitalysoundybroadcasting.
yyyMenuyLanguagey:ySelectsyaylanguageyforytheydisplayytext.
yyyAudioyLanguageyyy[InyDigitalyModeyOnly]y:ySelectytheydesiredylanguagey
whenywatchingydigitalybroadcastingycontaingyseveraly
voiceylanguages.
yyySubtitleyLanguageyy[InyDigitalyModeyOnly]y:yUseytheySubtitleyfunctionywheny
twoyorymoreysubtitleylanguagesyareybroadcast.
y yyIfysubtitleydatayinyayselectedylanguageyisynotybroadcast,ytheydefaultylanguageysubtitleywillybeydisplayed.
AdvabcedyFunction
Information
PICTURE
AUDIO
SETUP
TIME
LOCK
OPTION
NETWORK
MYyMEDIA
PressyOK()ytoysetyyourypictureysettings.
CustomerySupport
2
ZoomyIn
Close
SETTINGy y yOPTIONy yLanguage
Youycanyselectytheylanguageyofytheymenuydisplayedyonytheyscreenyandythey
digitalysoundybroadcasting.
yyyMenuyLanguagey:ySelectsyaylanguageyforytheydisplayytext.
yyyAudioyLanguageyyy[InyDigitalyModeyOnly]y:yelectytheydesiredylanguageywheny
watchingydigitalybroadcastingycontaingyseveralyvoicey
languages.
yyySubtitleyLanguageyy[InyDigitalyModeyOnly]y:yUseytheySubtitleyfunctionywheny
twoyorymoreysubtitleylanguagesyareybroadcast.
y yyIfysubtitleydatayinyayselectedylanguageyisynotybroadcast,ytheydefaultylanguageysubtitleywillybeydisplayed.
Exit
SoftwareyUpdate
PictureyTest
2
SoundyTest
SignalyTest
ZoomyOut
Close
Product/ServiceyInfo.
NetworkyTest
UseryGuide
Close
UseryGuide
3
2
Toyuseyinputydevice
ToyuseyEnergyySavingyfeature
PROGRAMMEySetting
Toysetytimeyoptions
PICTURE,ySOUNDySetting
OPTION
ToysetyTVylockyoptions
Toysetylanguage
AdvabcedyFunction
Toysetycountry
Information
1
Toysetysubtitle
1
Allowsytoyselectytheycategoryyyouywant.
2
Allowsytoyselectytheyitemyyouywant.
Youycanyusey
ytoymoveybetweenypages.
H
3
Allowsytoybrowseytheydescriptionyofythey
functionyyouywantyfromytheyindex.
1
Showsytheydescriptionyofytheyselectedymenu.
ytoymoveybetweenypages.
Youycanyusey
H
2
Zoomsyinyoryoutytheyscreen.
28 MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.y
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.y
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
yy Check if the batteries are still working and properly installed ( to , to ).
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting
to the PC (RGB/
HDMI DVI),
‘No signal’ or
‘Invalid Format’ is
displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the RGB/HDMI cable.
yy Restart the PC with the TV on.
SPECIFICATIONS
29
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
32LM58**
42LM58**
47LM58**
32LM5800-TC
32LM580Y-TC
746.0 x 528.0 x 204.0
42LM5800-TC
42LM580Y-TC
979.0 x 660.0 x 269.0
47LM5800-TC
47LM580Y-TC
1089.0 x 722.0 x 269.0
979.0 x 594.0 x 35.5
1089.0 x 655.0 x 35.5
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
9.8
15.6
18.1
Without stand (kg)
8.5
13.1
15.6
Without stand (mm) 746.0 x 462.0 x 35.5
Power requirement
MODELS
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
55LM58**
47LM46**
55LM46**
55LM5800-TC
55LM580Y-TC
47LM4600-TB
47LM460Y-TB
47LM4650-TB
47LM465Y-TB
47LM4610-TC
47LM461Y-TC
55LM4600-TB
55LM460Y-TB
55LM4650-TB
55LM465Y-TB
55LM4610-TC
55LM461Y-TC
1263.0 x 822.0 x 315.0 1089.0 x 720.0 x 269.0 1263.0 x 822.0 x 315.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
25.5
17.4
25.5
Without stand (kg)
21.9
14.9
21.9
Without stand (mm) 1263.0 x 754.0 x 35.5
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
32LS46**
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
32LS4600-TA
32LS460Y-TA
32LS4610-TC
32LS461Y-TC
746.0 x 528.0 x 204.0
Without stand (mm) 746.0 x 462.0 x 35.5
9.7
With stand (kg)
Without stand (kg)
Power requirement
1089.0 x 655.0 x 35.5 1263.0 x 754.0 x 35.5
8.2
42LS46**
42LS4600-TA
42LS460Y-TA
42LS4610-TC
42LS461Y-TC
979.0 x 660.0 x 269.0
47LS46**
47LS4600-TA
47LS460Y-TA
47LS4610-TC
47LS461Y-TC
1089.0 x 720.0 x 269.0
979.0 x 593.0 x 35.5
1089.0 x 655.0 x 35.5
15.1
17.4
12.7
14.9
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
ENGLISH
ENG
SPECIFICATIONS
30 SPECIFICATIONS
ENGLISH
ENG
Environment condition
New Zealand,
Singapore
Operating temperature
0 °C to 40 °C
Operating humidity
Less than 80 %
Storage temperature
-20 °C to 60 °C
Storage humidity
Less than 85 %
Television System
Programme
Coverage
Australia
Television System
Programme
Coverage
Indonesia,
Israel, Myanmar,
Sri Lanka
Television System
Programme
Coverage
Vietnam,
Malaysia
Television System
Programme
Coverage
Iran, Algeria,
Tunisia, Digital
model
Television System
Programme
Coverage
Analogue model,
India, Thailand,
South Africa, --
Television System
Programme
Coverage
External Antenna
Impedance
Digital TV
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
UHF 21 to 69
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
UHF 21 to 69
DVB-T
VHF 6 to 12,
UHF 21 to 69
DVB-T
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to
44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
75 Ω
75 Ω
SPECIFICATIONS
Component port connecting information
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Resolution
720x480
1920x1080
Component ports on the TV
Y
PB
PR
Video output ports on DVD
player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O (50 Hz / 60 Hz only)
3D supported mode
Input
Signal
Resolution
HDMI
720p
1280x720
Horizontal
Frequency
(kHz)
Vertial
Frequency
(Hz)
89.9 / 90
/ 75
59.94 / 60
/ 50
Frame packing (720 60p)
45 / 37.5
60 / 50
Side by Side(half), Top & Bottom
Playable 3D video format
1080i
1920x1080
33.7 /
28.125
60 / 50
Side by Side(half), Top & Bottom
1080p
1920x1080
53.95 / 54
23.98 / 24
Frame packing (1080 24p)
67.5 / 56.3
60 / 50
Side by Side, Top & Bottom,
Single Frame Sequential
27
24
Side by Side(half), Top & Bottom
33.7
30
Side by Side(half), Top &Bottom
RGB
1080p
1920x1080
66.587
59.93
Side by Side, Top & Bottom
USB
1080p
1920x1080
33.75
30
Side by Side, Top & Bottom,
MPO(Photo), JPS(Photo)
DLNA
1080p
1920x1080
33.75
30
Side by Side, Top & Bottom,
MPO(Photo), JPS(Photo)
DTV
Signal
Playable 3D video format
720p, 1080i
Side by Side, Top & Bottom
Media contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D
Top & Bottom to play in 3D.
ENGLISH
ENG
HDMI/DVI-DTV supported mode
31
For any Suggestion, Opinion,
Complaints, Please Call
800 54 in UAE
0800 54 54 54 in South Africa
080 100 54 54 in Morocco
19960 in Egypt
Other countries, Please contact our
local dealer or log into
http://www.lg.com
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
(Only DTV)
Download PDF

advertising