LG | 42PJ350R | LG 42PJ350R Owner’s Manual

OWNER’S MANUAL
PLASMA TV
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
SERIAL
42PJ250R
50PJ250R
42PJ350R
50PJ350R
42PJ260R
50PJ260R
50PK550R
60PK550R
P/NO : MFL62883002 (1005-REV01)
www.lg.com
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 2
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
1
2
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
7
Only use attachments/accessories specified by
the manufacturer.
8
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
9
Unplug this apparatus during lighting storms
or when unused for long periods of time.
10
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Do not use this apparatus near water.
Clean only with soft dry cloth.
3
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
4
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers)that produce
heat.
5
6
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
3
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 4
SAFETY INSTRUCTIONS
4
11
Never touch this apparatus or antenna during
a thunder or lighting storm.
12
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
13
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
14
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
15
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.
16
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
17
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
Short-circuit
Breaker
18
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
19
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 5
20
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
21
Moving
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
22
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
23
If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the power
cord contact an authorized service center.
24
Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
25
Keep the product away from direct sunlight.
5
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 6
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PREPARATION
USB
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cable Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Securing the TV to the wall to prevent falling when
the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Variable Audio Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Initializing Setup (Mode Setting) . . . . . . . . . . . . . . . . . . . . . . 42
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Channel Setup
- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
- Add / Delete Channel (Manual Tuning) . . . . . . 47
- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6
Favorite Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Favorite Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 78
Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 80
Manual Picture Adjustment (User Mode) . . . . . . . . . . 81
Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . .82
Energy Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Image Sticking Minimization (ISM) Method . . . . . . 86
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Initial Setting (Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 7
SOUND & LANGUAGE CONTROL
Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 89
Clear Voice ll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 91
Sound Setting Adjustment - User Mode . . . . . . . . . . . 92
- Infinite Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Selecting Audio Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
On-Screen Menus Language Selection . . . . . . . . . . . . . 98
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
TIME SETTING
Clock Setting
- Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
External Control Through RS-232C . . . . . . . . . . . . . . . . .110
7
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 8
FEATURE OF THIS TV
■
This feature is not available for all models.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX
Certified device that plays DivX video. Visit
www.divx.com for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
DivX Video-on-Demand (VOD) content. To generate
the registration code, locate the DivX VOD section
in the device setup menu. Go to vod.divx.com with
this
code to complete the registration process and learn
more about DivX VOD.
Manufactured under license from Dolby Laboratories.
“Dolby “and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC."
“DivX Certified to play DivX video, including premium content”
“Pat. 7,295,673; 7,460,688;7,519,274”
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN
■
■
■
8
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV
for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma).
Image burn can also occur on the letterboxed
areas of your TV if you use the 4:3 aspect
ratio setting for an extended period.
MFL62883001-Edit1-en 5/14/10 11:11 AM Page 9
PREPARATION
ACCESSORIES
ENE
RG
Y
AV
SAV
ING
MO
DE
INP
UT
1
2
4
0
L
ME
NU
E
A
G
0
VO
P
Q.
ME
NU
EN
INP
UT
ME
NU
TE
R
MU
TE
Q.VIE
W
RA
TI
O
CH
BA
CK
TV
9
MA
FA RK
V
L
3
6
8
LI
ST
CH
MO
DE
2
5
7
O
MU
TE
CL
VO EA
IC R
E
ll
AV
SAV
ING
1
4
9
Q.VIE
W
FA
V
RA
TI
ENE
RG
Y
TV
6
8
ST
VO
3
5
7
LI
E
A
G
1.5V 1.5V
P
Q.
EN
TE
R
EX
IT
ME
NU
BA
CK
FRE
EZE
EX
IT
or
Owner’s Manual
M4x28
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
The accessories included may differ from the images below.
FRE
EZE
Remote Control
Batteries
(Some models)
Power Cord
M5x14
x4
x3
Bolts for stand assembly
(Refer to P.14)
(Except 60PK550R)
x2
Protection Cover
(Refer to P.15)
Cable Holder
(Refer to P.17)
RF Adapter
(Some models)
You must connect it to the antenna
wire after fixing in Antenna Input.
This adapter is only supplied in
A r g e n t i n a.
TV
Polishing Cloth
(Not included with all models.)
Ferrite Core
* Wipe spots on the exterior only with
the polishing cloth.
(Gray)
(This feature is
available only
42PJ*** models.)
* Do not wipe roughly when removing
stain. Excessive pressure may cause
scratch or discoloration.
Tie Band
The ferrite core can be used to reduce the electromagnetic waves in the PC Audio cable.
Wind the PC Audio cable on the ferrite core twice, and
Ferrite Core then plug the cables into the TV as shown in the fol(Gray)
lowing picture.
(This feature is not Place the ferrite core close to AUDIO IN(RGB/DVI) jack
available for all
on the display.
models.)
AUDIO IN
(RGB/DVI)
Place the ferrite core close to
AUDIO IN(RGB/DVI) jack on the display.
Wall
Ferrite core can be used to reduce RF noise when connecting
the RF cable.
The closer the location of the ferrite core to the “ANTENNA
IN”, the better it is.
Ferrite Core
(Black)
(This feature is not
available for all
models.)
Ferrite core can be used to reduce the electromagnetic waves that may interfere with the
TV. Install the Ferrite core on the power cable
close to the wall plug.
close to the wall plug.
9
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 10
PREPARATION
FRONT PANEL INFORMATION
■
Image shown may differ from your TV.
PREPARATION
42/50PJ250R, 42/50PJ260R
Remote Control Sensor
VOL
ENTER
CH
Intelligent Sensor
Adjusts picture according to the surrounding
conditions.
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
VOL
ENTER
ENTER
POWER
Button
INPUT
Button
MENU
Button
ENTER
Button
VOL
VOLUME
(-, +) Buttons
CH
CHANNEL
(E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
CAUTION
G
G
10
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
CH
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 11
42/50PJ350R
Remote Control Sensor
PREPARATION
Intelligent Sensor
Adjusts picture according to the surrounding
conditions.
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
ENTER
CH
VOL
ENTER
POWER
Button
INPUT
Button
MENU
Button
ENTER
Button
VOL
CH
VOLUME
(-, +) Buttons
CHANNEL
(E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
CH
50/60PK550R
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding
conditions.
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
ENTER
VOL
CH
ENTER
POWER
Button
INPUT
Button
MENU
Button
ENTER
Button
VOL
VOLUME
(-, +) Buttons
CH
CHANNEL
(E,D)Buttons
You can operate the button just by touching the button lightly with your finger.
ENTER
C
VOL
11
1
12
(
)
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
2
PB
6
ANTENNA
IN
1
3
R
5
USB IN
PB
Y
R
COMPONENT IN
VIDEO
PR
L
VIDEO
R
5
R
HDMI
IN 3
L
AUDIO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
R AUDIO L(MONO)
VARIABLE AUDIO OUT
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
VIDEO
VIDEO L/MONO AUDIO R
8
VIDEO L/MONO AUDIO R
2
R
1
R
VIDEO
AV
4
AV IN 2
Y
COMPONENT IN
PR
4
2
RGB IN(PC)
L
3
R
R AUDIO L(MONO)
VARIABLE AUDIO OUT
(CONTROL&SERVICE)
VIDEO
RS-232C IN
1
2
L
IN1
3
AUDIO
AV
AUDIO IN
(RGB/DVI)
VIDEO
HDMI IN 1
R
HDMI IN
9
VARIABLE AUDIO OUT
1
2
- AUDIO - (Mono)
SERVICE
ONLY
7
HDMI IN 2
PREPARATION
1
IN1
■
VARIABLE AUDIO OUT
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 12
PREPARATION
BACK PANEL INFORMATION
Image shown may differ from your TV.
For 42/50PJ250R
1
3
AV IN 2
ANTENNA
IN
6
For 42/50PJ260R, 42/50PJ350R, 50/60PK550R
7
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 13
HDMI/DVI IN
Digital Connection. Supports HD video and Digital audio.
Accepts DVI video using an adapter or HDMI to DVI cable (not included)
2
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
3
AV (Audio/Video) IN
Analog composite connection. Supports standard definition video only (480i).
4
VARIABLE AUDIO OUT
Analog audio output for use with amps and home theater systems.
5
COMPONENT IN
Analog Connection. Supports SD/HD.
Uses a red, green, and blue cable for video & red and white for audio.
6
ANTENNA IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
7
USB IN(Except 42/50PJ250R)
Used for photo, music and movie.
USB IN SERVICE ONLY (For 42/50PJ250R)
Used for software updates.
8
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC power.
9
RGB (PC) (Except 42/50PJ250R)
Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).
AUDIO IN (RGB/DVI) (Except 42/50PJ250R)
1/8" (0.32 cm) headphone jack for analog PC audio input.
PREPARATION
1
13
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 14
PREPARATION
STAND INSTRUCTION
■
Image shown may differ from your TV.
PREPARATION
Installation (Except 60PK550R)
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
Stand Body
x3
Stand Base
M5x14
Assemble the TV as shown.
3
4
Assemble the TV as shown and fix the 4 bolts
securely using the holes in the back of the TV.
x4
M4x28
! NOTE
G
G
14
When assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation). If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 15
Detachment
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Loose the bolts from TV.
PREPARATION
1
(42/50PJ250R, 42/50PJ350R,
42/50PJ260R, 50PK550R)
x4
M4x28
3
(60PK550R)
x4
M4x30
Detach the stand from TV.
PROTECTION COVER
(Fix a Guide to the Outsides.)
PROTECTION COVER
After removing the stand, install the included
p r o t e c t i o n c o v e r over the hole for the stand.
Press the P R O T E C T I O N C O V E R into the TV
until you hear it click.
15
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 16
PREPARATION
VESA WALL MOUNTING
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
Model
A
B
Standard Screw
Quantity
Wall Mounting
bracket
(sold separately)
Wall Mounting
bracket
(sold separately)
42/50PJ250R
42/50PJ260R
50PK550R,
42/50PJ350R
400 * 400
M6
4
AW-50PG60MS
AW-50PG60M
60PK550R
600 * 400
M8
4
AW-60PG60MS
! NOTE
G
G
G
G
G
Screw length needed depends on the wall mount
used. For further information, refer to the instructions included with the mount.
Standard dimensions for wall mount kits are shown
in the table.
When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
Do not use screws longer then the standard dimension, as they may cause damage to the inside to
the TV.
For wall mounts that do not comply with the VESA
CAUTION
16
G
G
G
standard screw specifications, the length of the
screws may differ depending on their specifications.
Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.
LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installation instructions.
Do not install your wall mount kit while your TV is turned on. It may result in personal
injury due to electric shock.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 17
CABLE ARRANGEMENT
■
Image shown may differ from your TV.
PREPARATION
After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
To connect additional equipment, see EXTERNAL EQUIPMENT SETUP section.
CABLE HOLDER
17
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 18
PREPARATION
DESKTOP PEDESTAL INSTALLATION
■
Image shown may differ from your TV.
PREPARATION
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches
4 inches
4 inches
4 inches
CAUTION
G
G
Ensure adequate ventilation by following the clearance recommendations.
Do not mount near or above any type of heat source.
SWIVEL STAND
(This feature is not available for all models.)
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your
viewing position.
18
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 19
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
■
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■
PREPARATION
■
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
19
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 20
PREPARATION
■
To prevent damage do not connect to the power outlet until all connections are made between the devices.
ANTENNA OR CABLE CONNECTION
(
)
1. Antenna (Analog)
PREPARATION
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connection.
For optimum picture quality, adjust antenna direction if needed.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■
2. Cable
ANTENNA
IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
20
(
)
Be careful not to bend the copper wire
when connecting the antenna.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 21
EXTERNAL EQUIPMENT SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■
Image shown may differ from your TV.
HD RECEIVER SETUP
Component Connection
Y
PB
PR
VIDEO
VIDEO
L
RS-232C IN
R
HDMI/DVI IN
1
ANTEN
IN
2
RGB (PC)
AUDIO
HDMI IN
L
R AUDIO L(MONO)
VARIABLE AUDIO OUT
1
2
1
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O 1 jacks on the TV.
AV
AUDIO IN
(RGB/DVI)
R
2
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on
the TV. Match the jack colors (Y = green, PB = blue, and
PR = red).
IN1
1
(CONTROL&SERVICE)
2
Y
PB
PR
L
EXTERNAL EQUIPMENT SETUP
COMPONENT IN
1. How to connect
R
2. How to use
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.
operation)
■
Select the C o m p o n e n t 1 input source on the TV
using the I N P U T button on the remote control.
If connected to C O M P O N E N T I N 2 input,
select the C o m p o n e n t 2 input source on the TV.
■
Supported Resolutions
Y, CB/PB, CR/PR
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480i
15.73
15.75
59.94
60.00
720x480p
31.47
31.50
59.94
60.00
720x576i
15.625
50.00
Signal
Component
HDMI
720x576p
31.25
50.00
480i
Yes
No
1280x720p
480p
576i
576p
Yes
Yes
44.96
45.00
37.50
59.94
60.00
50.00
Yes
No
Yes
Yes
1920x1080i
720p
Yes
Yes
33.72
33.75
28.125
59.94
60.00
50.00
1080i
Yes
Yes
1920x1080p
1080p
Yes
Yes
56.25
67.432
67.50
50.00
59.94
60.00
21
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 22
EXTERNAL EQUIPMENT SETUP
HDMI Connection
RGB (PC)
HDMI/DVI IN
RS-232C IN
VIDEO
1
1
AUDIO
HDMI IN
IN1
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to H D M I I N 1*,
H D M I / D V I I N 1*, H D M I I N 2* or H D M I 3* jack on
the TV.
R
2
1
L
R AUDIO L(MONO)
VARIABLE AUDIO OUT
1. How to connect
VIDEO
AV
AUDIO IN
(RGB/DVI)
(CONTROL&SERVICE)
2
No separate audio connection is necessary.
HDMI supports both audio and video.
1
2. How to use
HDMI OUTPUT
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
■ Select the H D M I 1*, H D M I2* or H D M I 3* input source
on the TV using the INPUT button on the remote control.
■
* H D M I I N 1 , H D M I I N 2: For 42/50PJ250R
* H D M I / D V I I N 1, H D M I I N 2 , H D M I 3: For
42/50PJ260R, 42/50PJ350R, 50/60PK550R
! NOTE
G
22
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version
1.3, it can cause flickers or no screen display. In
this case use the latest cables that support
HDMI version 1.3.
G
HDMI mode supports PCM audio format only.
G
If the Audio setting is set to Dolby/DTS/Bitstream
in some DVDP/STB, make sure to change the setting to PCM.
HDMI-DTV
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480i
15.73
15.75
59.94
60.00
720x480p
31.47
31.50
59.94
60.00
720x576i
15.625
50.00
720x576p
31.25
50.00
1280x720p
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.125
59.94
60.00
50.00
1920x1080p
56.25
67.432
67.50
27.00
33.75
50.00
59.94
60.00
24.00
30.00
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 23
DVI to HDMI Connection - Except 42/50PJ250R
1. How to connect
PB
Y
(CONTROL&SERVICE)
1
PR
L
RS-232C IN
1
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
■ Select the H D M I 1 input source on the TV using the
I N P U T button on the remote control.
■
R
HDMI/DVI IN
1
AUDIO
RGB (PC)
IN1
HDMI IN
VIDEO
VIDEO
2
2. How to use
L
R AUDIO L(MONO)
VARIABLE AUDIO OUT
2
AV
AUDIO IN
(RGB/DVI)
R
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
EXTERNAL EQUIPMENT SETUP
Connect the DVI output of the digital set-top box to the
H D M I / D V I I N 1 jack on the TV.
1
2
! NOTE
G
A DVI to HDMI cable or adapter is required for this
connection. DVI doesn't support audio, so a separate
audio connection is necessary.
DVI-DTV OUTPUT
L
R
23
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 24
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Component Connection
2
PB
PR
L
R
2. How to use
■
■
■
Turn on the DVD player, insert a DVD.
Select the C o m p o n e n t 1* input source on the TV using the
I N P U T button on the remote control.
If connected to C O M P O N E N T I N 2 input, select the
C o m p o n e n t 2 input source on the TV.
Refer to the DVD player's manual for operating instructions.
R AUDIO L(MONO)
VIDEO
■
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
24
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
PR
1
R
(CONTROL&SERVICE)
Y
L
RS-232C IN
R
HDMI/DVI IN
1
ANTE
IN
2
RGB (PC)
AUDIO
2
HDMI IN
L
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O 1* jacks on the TV.
VIDEO
AV
AUDIO IN
(RGB/DVI)
1
2
PB
Y
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O 1* jacks on the TV.
Match the jack colors (Y = green, PB = blue, and PR = red).
IN1
EXTERNAL EQUIPMENT SETUP
1
COMPONENT IN
1. How to connect
VIDEO
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 25
R AUDIO L(MONO)
Composite (RCA) Connection
1. How to connect
RGB (PC)
HDMI/DVI IN
RS-232C IN
1
R
1
AUDIO
HDMI IN
L
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
2
(CONTROL&SERVICE)
2. How to use
■
■
■
1
Turn on the DVD player, insert a DVD.
Select the A V 1 or A V 2 input source on the TV using the
I N P U T button on the remote control.
Refer to the DVD player's manual for operating instructions.
VIDEO
L
R
AUDIO
HDMI Connection
EXTERNAL EQUIPMENT SETUP
V I D E O jacks between TV and
Connect the A U D I O/V
DVD. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
IN1
1
VIDEO
AV
AUDIO IN
(RGB/DVI)
No separate audio connection is necessary.
HDMI supports both audio and video.
PR
L
L
RS-232C IN
R
HDMI/DVI IN
AUDIO
RGB (PC)
1
HDMI IN
R
2
1
2
R AUDIO L(MONO)
VARIABLE AUDIO OUT
Connect the HDMI output of the DVD to the H D M I I N 1
*, H D M I / D V I I N 1*, H D M I I N 2* or H D M I 3* jack on
the TV.
IN1
1
VIDEO
(RGB/DVI)
VID
1. How to connect
(CONTROL&SERVICE)
1
2. How to use
Select the HDMI1*, H D M I2* or HDMI3* input source
on the TV using the INPUT button on the remote control.
■ Refer to the DVD player's manual for operating instructions.
■
HDMI OUTPUT
* H D M I I N 1 , H D M I I N 2: For 42/50PJ250R
* H D M I / D V I I N 1, H D M I I N 2 , H D M I 3: For
42/50PJ260R, 42/50PJ350R, 50/60PK550R
25
R AUDIO L(
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 26
EXTERNAL EQUIPMENT SETUP
VCR SETUP
Antenna Connection
Connect the antenna cable to the RF
antenna in socket of the VCR.
PR
2
1
R
L
Connect the RF antenna out socket of the
VCR to the A N T E N N A I N socket on the
TV.
ANTENNA
IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
2
EXTERNAL EQUIPMENT SETUP
1
C
1. How to connect
2. How to use
Wall Jack
2
■
■
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Antenna
Composite (RCA) Connection
1. How to connect
RGB (PC)
IN1
1
1
2. How to use
HDMI/DVI IN
RS-232C IN
(CONTROL&SERVICE)
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select the A V 1 input source on the TV using the I N P U T
button on the remote control.
■ If connected to A V I N 2, select A V 2 input source on the TV.
■
ANT IN
S-VIDEO
VIDEO
L
R
AUDIO
ANT OUT
! NOTE
G
26
If you have a mono VCR, connect the audio cable
from the VCR to the A U D I O - L ( M o n o ) jack of the
TV.
VIDEO
2
HDMI IN
■
R AUDIO L(MONO)
VARIABLE AUDIO OUT
1
AV
AUDIO IN
(RGB/DVI)
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
OUTPUT
SWITCH
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 27
OTHER A/V SOURCE SETUP
■
Image shown may differ from your TV.
Camcorder
1. How to connect
■
■
■
Select the A V 2 input source on the TV using
the I N P U T button on the remote control.
If connected to A V I N 1* input, select the
A V 1* input source on the TV.
Operate the corresponding external equipment.
SERVICE
ONLY
L
HDMI IN 2
2. How to use
VIDEO
VIDEO L/MONO AUDIO R
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
1
R
EXTERNAL EQUIPMENT SETUP
1
Video Game Set
AV IN 2
27
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 28
EXTERNAL EQUIPMENT SETUP
USB CONNECTION - Except 42/50PJ250R
USB IN
i.e)
1. How to connect
28
HDMI IN
Connect the USB device to the U S B I N jack on the side
of TV.
R
1
■
After connecting the U S B I N jack, you use the USB function. (G p .58)
AV IN 2
2. How to use
VIDEO L/MONO AUDIO R
)
(
EXTERNAL EQUIPMENT SETUP
VARIABLE AUDIO OUT
1
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 29
PC SETUP- Except 42/50PJ250R
PR
VIDEO
AUDIO
L
VIDEO
1
2
RGB OUTPUT
AUDIO
R
Turn on the PC and the TV.
Select the R G B - P C input source on the TV using the
I N P U T button on the remote control.
PR
L
RS-232C IN
1
HDMI/DVI IN
AUDIO
RGB (PC)
IN1
HDMI IN
1
R
2
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
L
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
1. How to connect
VIDEO
AV
AUDIO IN
(RGB/DVI)
1
PB
DVI to HDMI Connection
R
■
L
(CONTROL&SERVICE)
2. How to use
■
R AUDIO L(MONO)
VARIABLE AUDIO OUT
RS-232C IN
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I) jack on the TV.
HDMI/DVI IN
1
2
RGB (PC)
1
R
Connect the VGA output of the PC to the R G B I N
( P C ) jack on the TV.
HDMI IN
IN1
1
2
EXTERNAL EQUIPMENT SETUP
1. How to connect
AV
AUDIO IN
(RGB/DVI)
VGA (D-Sub 15 pin) Connection
P
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
(CONTROL&SERVICE)
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
1
2
DVI OUTPUT
AUDIO
2. How to use
■
■
Turn on the PC and the TV.
Select the HDMI 1 input source on the TV using the
I N P U T button on the remote control.
29
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 30
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
G To get the best picture quality, adjust the PC graphics card to 1024x768(42PJ250R/260R/350R),
13 6 5 x 7 6 8 ( 5 0 P J 2 5 0 R / 2 6 0 R / 3 5 0 R ) ,
1920x1080(50/60PK550R).
G Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
G In PC mode, there may be noise associated with the
resolution, vertical pattern, contrast or brightness.
If noise is present, change the PC output to another resolution, change the refresh rate to another
rate or adjust the brightness and contrast on the
PICTURE menu until the picture is clear.
Supported Display Specifications
(RGB-PC, HDMI-PC)
30
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x400
31.469
70.09
640x480
31.469
59.94
800x600
37.879
60.317
1024x768
48.363
60.004
1280x768
47.776
59.87
1360x768
47.720
59.799
1280x1024
63.668
59.895
1920x1080
66.587
59.934
G Avoid keeping a fixed image on the screen for a long
period of time. The fixed image could become permanently imprinted on the screen.
G The synchronization input form for Horizontal and
Vertical frequencies is separate.
G Depending on the graphics card, some resolution
settings may not allow the image to be positioned
on the screen properly.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 31
Screen Setup for PC mode
Selecting Resolution
You can choose the resolution in RGB mode.
The P o s i t i o n, P h a s e, and S i z e can also be adjusted.
Move
Resolution
E
• Brightness
50
• Sharpness
70
• Color
70
• Tint
0
• Color Temperature
0
Move
Enter
Auto config.
Position
W
C
Size
• Advanced Control
• Picture Reset
Phase
Screen
Reset
G
1024 x 768
1280 x 768
1360 x 768
Prev.
EXTERNAL EQUIPMENT SETUP
Screen
PICTURE
1
MENU
2
ENTER
3ENTER
4
ENTER
Select P I C T U R E.
Select S c r e e n.
Select R e s o l u t i o n.
Select the desired resolution.
5 ENTER
31
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 32
EXTERNAL EQUIPMENT SETUP
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
EXTERNAL EQUIPMENT SETUP
Screen
PICTURE
Move
Prev.
Resolution
E
• Brightness
50
• Sharpness
70
• Color
70
• Tint
0
• Color Temperature
0
Auto config. G
To Set
Position
W
C
Size
Yes
No
• Advanced Control
• Picture Reset
Phase
Screen
Reset
1
MENU
2
Select P I C T U R E.
ENTER
Select S c r e e n.
ENTER
Select A u t o c o n f i g ..
ENTER
Select Y e s.
3
4
5
ENTER
32
Move
Enter
Start Auto Configuration.
• If the position of the image is still not
correct, try Auto adjustment again.
• If picture needs to be adjusted again
after Auto adjustment in RGB, you can
adjust the P o s i t i o n, S i z e or P h a s e.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 33
Adjustment for screen Position, Size, and Phase
PICTURE
Move
Screen
Enter
Move
Prev.
E
Resolution
• Brightness
50
• Sharpness
70
• Color
70
• Tint
0
• Color Temperature
0
D
Auto config.
Position
W
G
F
G
C
Size
• Advanced Control
E
• Picture Reset
Phase
Screen
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
Position: This feature operates only in Component(except 480i, 576i) and RGB mode.
Size, Phase: This feature operates only in RGB mode.
Reset
1
MENU
2
ENTER
3
ENTER
Select P I C T U R E.
■
Select S c r e e n.
■
Select P o s i t i o n, S i z e, or P h a s e.
■
4
ENTER
Make appropriate adjustments.
P o s i t i o n: This function is to adjust picture to left/right and up/down as you
prefer.
S i z e: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal
screen size will also change.
P h a s e : This function allows you to
remove any horizontal noise and clear or
sharpen the image of characters.
5
ENTER
33
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 34
EXTERNAL EQUIPMENT SETUP
Screen Reset (Reset to original factory values)
Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings.
This feature operates only in Component(except 480i, 576i) and RGB mode.
EXTERNAL EQUIPMENT SETUP
Screen
PICTURE
Move
Move
Prev.
Resolution
E
• Brightness
50
• Sharpness
70
• Color
70
• Tint
0
• Color Temperature
0
• Advanced Control
• Picture Reset
Screen
1
MENU
2
Select P I C T U R E.
Select S c r e e n.
ENTER
Select R e s e t.
4
ENTER
5
ENTER
Auto config.
Select Y e s.
To Set
Position
W
C
Yes
Size
Phase
Reset
ENTER
3
34
Enter
G
No
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 35
VARIABLE AUDIO OUT
PR
L
AUDIO
R
R
ANTENNA
IN
2
Set up your speakers through your analog stereo amplifier, according to the instructions provided with the
amplifier.
1
2
C IN
L
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
IN1
PC)
1
RVICE)
! NOTE
G
When connecting with external audio equipments, such as
amplifiers or speakers, you can turn the TV speakers off in
the menu. (G p . 9 5)
L
R
AUDIO
EXTERNAL EQUIPMENT SETUP
Connect audio outputs to the TV’s VARIABLE AUDIO
O U T jacks.
VIDEO
AV
DIO IN
B/DVI)
1
PB
1. How to connect
COMPON
Send the TV’s audio to external audio equipment via the Audio Output port.
35
MFL62883001-Edit1-en 5/14/10 11:06 AM Page 36
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
42/50PJ260R, 42/50PJ350R, 50/60PK550R
WATCHING TV / CHANNEL CONTROL
POWER Turns the TV on from standby or off to standby.
ENERGY SAVING Adjusts the Energy Saving.
AV MODE Toggles through preset Video and Audio modes. G p.54
INPUT
Rotates through inputs.
Also switches the TV on from standby. G p.49
TV Select the remote operating mode: TV
Select a Channel.
NUMBER button Selects numbered items in a menu.
ENERGY
AV MODE
INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
0
Q.VIEW
LIST
MARK
FAV
LIST Displays the channel list.
VOL
Q.VIEW Tunes to the last channel viewed.
RATIO
CH
MUTE
Q.MENU
MENU
Colored Program edit.
buttons
ENTER
SIMPLINK
Control buttons
(Fast Forward), G (Playback), l l (Pause)
Controls the SIMPLINK compatible devices.
FF (Rewind), GG
FREEZE Freezes the current frame.
BACK
EXIT
FREEZE
36
P
A
G
E
MFL62883001-Edit1-en 5/14/10 11:06 AM Page 37
VOLUME UP
/DOWN Adjusts the volume.
FAV Scroll through the programmed Favorite channels. G p.52
RATIO Changes the aspect ratio.
MUTE Switches the sound on or off. G p.41
CHANNEL Changes the channel.
UP/DOWN
PAGE Moves from one full set of screen information to the next one.
UP/DOWN
THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference.
(Up/Down/Left
Right/ENTER)
MENU Displays the main menu or clears all on-screen displays and returns to TV viewing.
WATCHING TV / CHANNEL CONTROL
MARK Select the input to apply the Picture Wizard settings.
Use to mark or unmark a photo/music/movie.
X STUDIO Select the Photo/Music/Movie list.
Q.MENU Opens the list of Quick Menu options.
BACK Allows the user to move return one step in an interactive application or other user interaction
function.
EXIT Clears all on-screen displays and return to TV viewing from any menu.
SIMPLINK Displays channel information at the top of the screen.
Installing Batteries
■
Open the battery compartment cover on the back side and install
the batteries matching correct polarity.
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
37
MFL62883001-Edit1-en 5/14/10 11:06 AM Page 38
WATCHING TV / CHANNEL CONTROL
42/50PJ250R
POWER Turns the TV on from standby or off to standby.
WATCHING TV / CHANNEL CONTROL
ENERGY SAVING Adjusts the Energy Saving.
AV MODE Toggles through preset Video and Audio modes. G p.54
INPUT
Rotates through inputs.
Also switches the TV on from standby. G p.49
TV Select the remote operating mode: TV
NUMBER button Select a Channel.
Selects numbered items in a menu.
ENERGY
AV MODE
TV
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
LIST Displays the channel list.
Q.VIEW Tunes to the last channel viewed.
INPUT
FAV
VOL
RATIO
CH
MUTE
MENU
CLEAR
VOICE ll Q.MENU
Colored Program edit.
buttons
SIMPLINK
Control buttons
ENTER
(Fast Forward), G (Playback), l l (Pause)
Controls the SIMPLINK compatible devices.
FF (Rewind), GG
FREEZE Freezes the current frame.
BACK
EXIT
FREEZE
38
P
A
G
E
MFL62883001-Edit1-en 5/14/10 11:06 AM Page 39
VOLUME UP
/DOWN Adjusts the volume.
FAV Scroll through the programmed Favorite channels. G p.52
RATIO Changes the aspect ratio.
CHANNEL
UP/DOWN Changes the channel.
PAGE
UP/DOWN Moves from one full set of screen information to the next one.
THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference.
(Up/Down/Left
Right/ENTER)
MENU Displays the main menu or clears all on-screen displays and returns to TV viewing.
CLEAR VOICE ll It helps users listen to human voices better.
Q.MENU Opens the list of Quick Menu options.
WATCHING TV / CHANNEL CONTROL
MUTE Switches the sound on or off. G p.41
BACK Allows the user to move return one step in an interactive application or other user interaction
function.
EXIT Clears all on-screen displays and return to TV viewing from any menu.
SIMPLINK Displays channel information at the top of the screen.
Installing Batteries
■
Open the battery compartment cover on the back side and install
the batteries matching correct polarity.
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
39
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 40
TURNING ON TV
Turning on TV just after installation
WATCHING TV / CHANNEL CONTROL
40
1
First, connect the power cord correctly.
At this moment, the TV is in standby mode.
■ In standby mode to turn TV on, press the
, I N P U T, C H (
or ) button on the TV or press the
P O W E R, I N P U T, C H (
9 ) button on the remote control.
or ) , N u m b e r ( 0~9
2
Select the viewing source by using the I N P U T button on the remote control.
■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
! NOTE
G
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 41
CHANNEL SELECTION
1
Press the C H (
or
) or NUMBER buttons to select a channel number.
Adjust the volume to suit your personal preference.
1
Press the V O L ( + or - ) button to adjust the volume.
2
If you want to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the MUTE, V O L ( + or - ) or AV MODE button.
WATCHING TV / CHANNEL CONTROL
VOLUME ADJUSTMENT
41
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 42
WATCHING TV / CHANNEL CONTROL
INITIALIZING SETUP (MODE SETTING)
This Function guides the user to easily set the essential items for viewing the TV for the first time when
purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be
activated from the user menus.
H o m e U s e”. We recommend setting the TV to “H
H o m e U s e” mode for the best picDefault selection is “H
ture in your home environment.
■ “S
S t o r e D e m o” Mode is only intended for use in retail environments. Customers can adjust the “P
Picture
menu - P i c t u r e m o d e” manually while inspecting the TV, but the TV will automatically return to preset instore mode after 5 minutes.
■ “S
S t o r e D e m o” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV
to set the image quality.
■ You can also adjust M o d e S e t t i n g in the O P T I O N menu.
■ Factory defaults are set when you choose “H
H o m e U s e”.
■
WATCHING TV / CHANNEL CONTROL
Step1. Welcome
Step3. Mode Setting
Select Mode
Selecting the environment.
Choose the setting mode you want.
WELCOME !
Store Demo
Thank you for choosing LG
Home Use
Select [Home Use] to use this TV at Home. To
use this TV at store, select [Store Demo].
Next
Next
Previous
1
1
ENTER
Select H o m e U s e Mode.
2
ENTER
Step2. Selecting Language
Step4. Auto Tuning
Language
English
Auto Tuning
Español
Portugués
Before starting,
be sure that the
TV antenna is connected.
Previous
Previous
Next
1
ENTER
1
2
ENTER
42
Select L a n g u a g e.
Next
Start A u t o T u n i n g.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 43
For 42/50PJ250R
ON-SCREEN MENUS SELECTION AND ADJUSTMENT
■
Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL
Move
Enter
Auto Tuning
PICTURE
Move
Aspect Ratio
Manual Tuning
Energy Saving
Channel Edit
Picture Mode
AUDIO
Enter
Move
: 16:9
Auto Volume
: Off
: On
Clear Voice ll
: Off
: Standard
• Level
90
Balance
• Brightness
50
Sound Mode
• Sharpness
60
• Colour
60
• Tint
Move
Enter
0
+
R
: Standard
R
G
• Treble
50
• Bass
50
E
CHANNEL
PICTURE
AUDIO
TIME
OPTION
INPUT
OPTION
Move
Menu Language
Clock
L
• Infinite Sound : Off
E
TIME
3
0
: English
Enter
INPUT
Move
WATCHING TV / CHANNEL CONTROL
• Contrast
Enter
Enter
TV
Off Time
: Off
Input Label
On Time
: Off
SIMPLINK
: On
AV2
Sleep Timer
: Off
Key Lock
: Off
Component 1
Caption
: Off
Component 2
Set ID
:1
HDMI1
ISM Method
: Normal
HDMI2
Demo Mode
: Off
AV1
E
1
MENU
Display each menu.
ENTER
Select a menu item.
2
3
ENTER
Accept the current selection.
EXIT
Return to TV viewing.
4
43
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 44
WATCHING TV / CHANNEL CONTROL
For 42/50PJ260R, 42/50PJ350R, 50/60PK550R
ON-SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL
Move
Enter
Auto Tuning
PICTURE
Move
Manual Tuning
Aspect Ratio
: 16:9
Energy Saving
: Off
Channel Edit
Picture Mode
WATCHING TV / CHANNEL CONTROL
: Standard
• Contrast 90
• Brightness 50
• Tint
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
• Sharpness 60
• Color
60
Move
Enter
0
R
G
50
• Bass
50
CHANNEL
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Move
Enter
USB
Photo List
: Off
Input Label
SIMPLINK
: On
Movie List
Sleep Timer
: Off
Key Lock
: Off
DivX Reg. Code
Caption
: Off
Deactivation
Set ID
:1
Music List
ISM Method
: Normal
Demo Mode
: Off
E
ENTER
Select a menu item.
2
3
ENTER
Accept the current selection.
4
EXIT
: English
: Off
Display each menu.
Return to TV viewing.
+
R
• Treble
On Time
MENU
L
: Standard
Off Time
1
3
0
E
Menu Language
Clock
Enter
• Infinite Sound : Off
E
TIME
44
AUDIO
Enter
Move
Enter
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 45
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
■
■
■
■
■
■
■
S l e e p T i m e r: Select the amount of time before
your TV turns off automatically.
D e l / A d d / F a v: Select channel you want to add/delete
or add the channel to the Favorite List.
U S B E j e c t: Select “Eject” in order to eject a USB
device.
Q.Menu
Aspect Ratio
16:9
Vivid
Sound Mode
Standard
Caption
Off
SAP
CH
F
Picture Mode
STEREO
Sleep Timer
Off
Del/Add/Fav
Delete
USB Eject
Eject
Close
G
WATCHING TV / CHANNEL CONTROL
■
A s p e c t R a t i o: Selects your desired picture format.
P i c t u r e M o d e: Selects the factory preset picture
depending on the viewing environment.
S o u n d M o d e: Selects the factory preset sound for
type of program.
C a p t i o n: Select on or off.
S A P: Selects MTS sound.
Except 42/50PJ250R
1
Q.MENU
Display each menu.
2
Make appropriate adjustments.
3
EXIT
Return to TV viewing.
45
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 46
WATCHING TV / CHANNEL CONTROL
CHANNEL SETUP
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the
channel list.
WATCHING TV / CHANNEL CONTROL
CHANNEL
Move
Enter
CHANNEL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Channel Edit
Channel Edit
Enter
Check your antenna
connection.
The previous channel
information will be updated
during Auto Tuning.
Start
Close
1
MENU
Select C H A N N E L.
2
ENTER
Select A u t o T u n i n g.
■
3
ENTER
Select S t a r t.
■
4
ENTER
Run A u t o T u n i n g.
5
BACK
EXIT
46
Move
Return to the previous menu.
Return to TV viewing.
■
The TV will ask for a password if parental
control has been activated (LOCK
Menu). Use the password you set up in
the LOCK Menu to allow a channel
search.
When setting the Auto tuning or Manual
tuning, the number of maximum channel
you can store is 200.
It is subject to change depending on the
broadcasting signal environment.
Memorizes all the available channels in
the order of DTV, TV, CADTV and CATV.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 47
Add/Delete Channel (Manual Tuning)
CHANNEL
Move
Enter
CHANNEL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Channel Edit
Channel Edit
Move
Enter
F
TV
G
Channel
2
TV 2
Add
Close
1
Select C H A N N E L.
MENU
2
Select M a n u a l T u n i n g.
ENTER
3
■
ENTER
Select T V or C A T V.
4
Select channel you want to add
or delete.
■
5
ENTER
Select A d d or D e l e t e.
6
BACK
EXIT
WATCHING TV / CHANNEL CONTROL
Select channel type and
RF-channel number.
Return to the previous menu.
■
The TV will ask for a password if parental
control has been activated (LOCK
Menu). Use the password you set up in
the LOCK Menu to allow a channel
search.
When setting the Auto tuning or Manual
tuning, the number of maximum channel
you can store is 900.
It is subject to change depending on the
broadcasting signal environment.
Memorizes all the available channels in
the order of DTV, TV, CADTV and CATV.
Return to TV viewing.
47
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 48
WATCHING TV / CHANNEL CONTROL
Channel Editing
The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in blue.
When a channel number is deleted, it means that you will be unable to select it using CH or button during
TV viewing.
If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select
it in the Channel Edit menu.
WATCHING TV / CHANNEL CONTROL
CHANNEL
Move
Enter
9
Auto Tuning
Manual Tuning
Channel Edit
Ch.Change
CATV
TV
S11
0
1 ARD
2 BBC1
4 C 01
5 S 46
6 C 05
8 C 10
4 S 11
4 C 52
4 ARD
7 C 06
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Move
CH
Page Change
Previous
Add/Delete
1
MENU
Select C H A N N E L.
■
2
ENTER
Select C h a n n e l E d i t.
■
3
ENTER
Select a channel.
4
Add or delete the channel.
5
BACK
EXIT
48
Return to the previous menu.
Return to TV viewing.
Keep pressing the
button and use the
or
buttons to move between DTV,
TV, CADTV and CATV.
If the channel list is too long, use the C H
or
button to move between pages.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 49
INPUT LIST
TV
1
AV1
TV
Select the desired input source.
AV1
42/50PJ350R,
50/60PK550R
TV
HDMI3
■
■
AV2
Component1
HDMI1
HDMI2
■
Component2
AV2
AV1
HDMI2
Component2
AV3
HDMI1
Component
RGB
WATCHING TV / CHANNEL CONTROL
42/50PJ250R
■
Component1
INPUT
ENTER
■
AV2
T V: Select it to watch over-the-air and digital cable
broadcasts.
A V: Select them to watch a VCR or other external
equipment.
C o m p o n e n t: Select them to watch DVD or a Digital
set-top box.
R G B - P C: Select it to view PC input.
H D M I: Select them to watch high definition devices.
49
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 50
WATCHING TV / CHANNEL CONTROL
INPUT LABEL
You can set a label for each input source when it's not in use.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Input Label
SIMPLINK
F
G
F
WATCHING TV / CHANNEL CONTROL
AV2
AV2
Key Lock
: Off
Component1
AV3
Caption
: Off
Component2
Component
:1
Set ID
:1
: Normal
ISM Method
: Off
Demo Mode
SIMPLINK
Key Lock
: Off
Caption
: Off
Set ID
ISM Method
RGB
HDMI1
: Normal
HDMI2
: Off
E
HDMI1
HDMI2
E
Close
HDMI3
42/50PJ250R
Close
50/60PK550R
With using OPTION menu
With using INPUT button
1
1
MENU
2
ENTER
3
ENTER
Select O P T I O N.
Select I n p u t L a b e l.
Select the source.
INPUT
2
Select the
source(except T V).
Select the label.
3
BACK
4
Return to the previous menu.
Select the label.
EXIT
5
BACK
EXIT
50
AV1
: Off
: On
Demo Mode
Enter
: English
AV1
Return to the previous menu.
Return to TV viewing.
Return to TV viewing.
G
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 51
CHANNEL LIST
You can check channels which are stored in the memory by displaying the channel list.
Channel List
TV2
TV5
TV6
Displaying Channel List
1
LIST
Display the C h a n n e l L i s t.
Selecting a channel in the channel list
1
WATCHING TV / CHANNEL CONTROL
Exit
Select a channel.
2
ENTER
Switch to the chosen channel number.
Paging through a channel list
1
CH
P
A
G
E
Turn the pages.
2
EXIT
51
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 52
WATCHING TV / CHANNEL CONTROL
FAVORITE CHANNEL SETUP
Favorite Channels are a convenient feature that lets you quickly select channels to channels of your choice without
waiting for the TV to select through all the in-between channels.
To tune to a favorite channel, press the F A V (favorite) button repeatedly.
Q.Menu
Aspect Ratio
WATCHING TV / CHANNEL CONTROL
Standard
Off
STEREO
Sleep Timer
Off
Del/Add/Fav
Delete
USB Eject
Eject
Close
Except 42/50PJ250R
CH
P
A
G
E
or
1
2
3
4
5
6
7
8
9
Select your desired channel.
0
2
Q.MENU
3
Select D e l / A d d / F a v.
Select F a v o r i t e.
4
EXIT
52
Sound Mode
SAP
1
Return to TV viewing.
16:9
Vivid
Caption
CH
F
Picture Mode
G
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 53
FAVORITE CHANNEL LIST
Favorite List
TV2
TV5
TV6
Displaying the favorite channel list
1
MARK
Display the Favorite channel list.
FAV
WATCHING TV / CHANNEL CONTROL
Exit
Selecting a channel in the favorite channel list
1
Select a channel.
2
ENTER
Switch to the chosen channel number.
Paging through a favorite channel list
1
CH
2
EXIT
P
A
G
E
Turn the pages.
Return to TV viewing.
53
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 54
WATCHING TV / CHANNEL CONTROL
AV MODE
AV Mode toggles through preset Video and Audio settings.
WATCHING TV / CHANNEL CONTROL
1AV MODE
Off
Cinema
Game
Sport
Press the A V M O D E button repeatedly to select the desired source.
■
■
■
■
■
■
54
C i n e m a” in AV mode,
If you select “C
C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO
menu - Sound Mode” respectively.
O f f” in AV mode, the
If you select “O
P i c t u r e M o d e” and “S
S o u n d M o d e”
“P
return to previous selected value.
O f f: Disables the AV MODE.
C i n e m a: Optimizes video and audio for
watching movies.
S p o r t: Optimizes video and audio for
watching sports events.
G a m e: Optimizes video and audio for
playing games.
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 55
KEY LOCK
The TV can be set up so that it can only be used with the remote control.
This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Move
: English
Input Label
Enter
OPTION
Move
Menu Language
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Off
Caption
: Off
Caption
: Off
On
Set ID
:1
Set ID
:1
: Normal
ISM Method
: Off
Demo Mode
ISM Method
Demo Mode
: Normal
: Off
E
E
1
MENU
Select O P T I O N.
ENTER
Select Key Lock.
2
■
3
ENTER
Select O n or O f f.
4
■
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
WATCHING TV / CHANNEL CONTROL
Menu Language
O n’, if the TV is turned
In K e y L o c k ‘O
off, to turn on the TV, press the INPUT,
CH
button on the TV or POWER,
INPUT, CH
or NUMBER buttons
on the remote control.
With the K e y L o c k O n, the display
‘ X K e y L o c k’ appears on the screen if
any button on the front panel is pressed
while viewing the TV (Except
(power)
botton).
55
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 56
WATCHING TV / CHANNEL CONTROL
Simplink allows you to control and play other AV devices connected with HDMI cable without additional cables
and settings. This TV may work with devices with HDMI-CEC support, but only devices with the
logo
are fully supported.
SIMPLINK can be turned on and off in the user menus.
WATCHING TV / CHANNEL CONTROL
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Off
Key Lock
: Off
Key Lock
: Off
On
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Off
Demo Mode
Demo Mode
E
: Normal
: Off
E
1
MENU
Select O P T I O N.
2
ENTER
Select S I M P L I N K.
ENTER
Select O n or O f f.
3
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.
G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will
stop.
G When you select a device with home theater functionality, the sound output automatically switches to the
home theater speakers and the TV speakers are turned off.
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker
to operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is
set to the TV volume.
G
56
MFL62883001-Edit1-en 5/3/10 11:55 AM Page 57
SIMPLINK Functions
D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV.
■ D i s c p l a y b a c k : Control connected AV devices by pressing the
, ENTER, G, A, l l, FF and GG buttons.
■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
■ S w i t c h a u d i o - o u t : Offers an easy way to switch audio-out.
■ S y n c P o w e r o n : When you play the connected AV device, TV will automatically turn on.
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this function)
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer
Electronics Control).
■
Display S I M P L I N K menu.
2
ENTER
Select the desired device.
WATCHING TV / CHANNEL CONTROL
1
3
ENTER
Control connected AV devices.
SIMPLINK Menu
1
2
3
4
5
T V v i e w i n g: Switch to the previous TV
channel regardless of the current mode.
D I S C p l a y b a c k: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.
V C R p l a y b a c k: Control the connected
VCR.
H D D R e c o r d i n g s p l a y b a c k: Control
recordings stored in HDD.
A u d i o O u t t o H o m e T h e a t e r s p e a ke r / A u d i o O u t t o T V: Select Home
Theater speaker or TV speaker for Audio
Out.
1
2
G
3
4
5
G
G
When no device is connected
(displayed in gray)
Selected Device
When a device is connected
(displayed in bright color)
57
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 58
USB - Except 42/50PJ250R
■
Image shown may differ from your TV.
ENTRY MODE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu is activated.
In USB device, you can not add a new folder or delete the existing folder.
■ Here shown may be somewhat different from your TV.
1 Connect the USB device to the U S B
IN
• This TV Supports on JPEG and MP3.
USB IN
jacks on the side of TV.
IN
USB memory stick
When removing the USB device
USB
R
Select the USB Eject menu before removing the USB
device.
2
Select P H O T O L I S T, M U S I C L I S T or
MOVIE LIST
1
Q.MENU
2
PHOTO LIST
MUSIC LIST
MOVIE LIST
3
ENTER
! NOTE
G
In order to avoid losing the USB memory stick, use
the USB connector(sold separately) to fix the USB
memory stick to the USB connector holder of the TV.
USB connector holder
USB Input
Port
USB Connector (sold separately)
- Fix the one end of the USB connector to
the USB memory stick and the other end
to the USB connector holder.
58
ENTER
Select Eject.
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 59
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition program may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may
be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which
has normal music files or image files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided
with the Windows operating system. In case of a storage device formatted as a different utility program
which is not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device
may not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not
offered by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Maximum of 200 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
Up to 128 English characters can be recognized as a file name.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G TV need more time to detect if the storage size is bigger.
If the USB memory is connected in Standby Mode, power on time would be longer than without memory.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
G When using a USB HDD via the USB extension cable, connect a support electric power source.
G
G
USB
59
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 60
USB
PHOTO LIST
You can view .JPG files from USB storage devices.
The On Screen Display on your model may be slightly different.
Supported photo file: *.JPG
Baseline: Max 4800 x no limit
■
■
■
You can play JPG files only.
Only baseline scan is supported among JPG. (SOF0, SOF1 only)
Non-supported files are displayed in the form of bitmap.
USB
Screen Components
2
1
MENU
Select U S B.
ENTER
ENTER
Select Photo List.
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
Photo List
Page 2/3
Drive1
JMJ001
Corresponding buttons on the
remote control
3
No Marked
KY103
09/10/2008
KY101
09/10/2008
KY104
09/10/2008
KY102
09/10/2008
KY105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Up Folder
1366x768, 125KB
1
Up Folder
E
Navigation
Popup Menu
4
60
CH
Page Change
MARK
Mark
Exit
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 61
Photo Selection and PopUp Menu
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
No Marked
E
Photo List
Up Folder
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
E
Navigation
Popup Menu
Page Change
CH
Mark
MARK
Exit
USB
Page 2/3
Drive1
JMJ001
No Marked
E
Photo List
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
JMJ001
09/10/2008
JMJ005
View09/10/2008
JMJ002
09/10/2008
JMJ006
Mark09/10/2008
All
JMJ003
09/10/2008
Delete
JMJ007
09/10/2008
JMJ004
09/10/2008
1366x768, 125KB
Up Folder
G
Up Folder
09/10/2008
E
Navigation
1
Popup Menu
CH
Page Change
MARK
Mark
Mark All : Mark all photos on the screen.
Unmark All : Deselect all marked photos.
G D e l e t e or Delete Marked : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
09/10/2008
1366x768,
125KB
Close
JMJ008
View : Display the selected item.
G
Exit
Select the target folder or drive.
• Use the C H
2
3
4
Select the desired photos.
ENTER
ENTER
Show the PopUp menu.
ENTER
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show of
the marked photos. If no photos are marked, you
can view all photos individually or all photos in
the folder in a slide show.
Select the desired PopUp menu.
61
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 62
USB
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
Photo List
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
No Marked
Up Folder
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
E
Navigation
Popup Menu
Page Change
CH
MARK
Mark
Exit
USB
Photo List
Page 2/3
Drive1
JMJ001
No Marked
Up Folder
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
1366x768, 125KB
Up Folder
1/17
Q.MENU
Slideshow
E
Navigation
Popup Menu
CH
Page Change
MARK
Mark
BGM
Delete
OPTION
Hide
Exit
The aspect ratio of a photo may change the size of the photo
displayed on the screen in full size.
Press the B A C K button to move to the previous menu screen.
1
2
3
Select the target folder or drive.
ENTER
ENTER
4
5
62
Select the desired photos.
Show the PopUp menu.
Select V i e w
ENTER
The selected photo is displayed in full size.
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 63
6
ENTER
Select the Slideshow , B G M,
D e l e t e or H i d e
(Rotate),
• Use
1/17
Q.MENU
Slideshow
BGM
Delete
OPTION
Hide
button to select the previous or next
photo.
• Use
button to select and control the
menu on the full-sized screen.
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. When selected, the selected photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n .
G
■
USB
G
( R o t a t e ) : Rotate photos.
Rotates the photo 90°, 180°, 270°, 360° clockwise.
G
D e l e t e : Delete photos.
G
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button to display.
63
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 64
USB
Using the Photo List function
Choose Options
1/17
Q.MENU
Slideshow
BGM
Delete
OPTION
Hide
Set Photo View.
Set Video.
Set Audio.
Prev.
USB
! NOTE
G
1
If you select “Off” for TV speaker, S e t A u d i o features in Choose Options will not work.
Q.MENU
Show the PopUp menu.
2
ENTER
When you select the S e t P h o t o V i e w ,
G
■
Select S e t P h o t o V i e w, S e t V i d e o or S e t A u d i o.
You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval between slides.
Slide Speed
Fast
Music Album
Prev.
1
2
64
ENTER
Show the S l i d e S p e e d or M u s i c A l b u m.
ENTER
Make appropriate adjustments.
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 65
G
When you select the S e t V i d e o ,
Set Video.
Picture Mode
Vivid
Contrast
100
Brightness
50
Sharpness
70
Color
70
Tint
0
R
G
Color Temperature
0
W
C
Noise Reduction
Medium
USB
Picture Reset
Prev.
1
ENTER
Show the P i c t u r e M o d e.
ENTER
Make appropriate adjustments.
2
G
When you select the S e t A u d i o ,
Set Audio
Sound Mode
Cinema
Auto Volume
Off
Clear Voice ll
Off
Balance
0
L
R
Prev.
1
2
ENTER
ENTER
Show the S o u n d M o d e, A u t o V o l u m e, C l e a r V o i c e I I and B a l a n c e.
Make appropriate adjustments.
65
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 66
USB
MUSIC LIST
You can use the Music List menu to play MP3 files from a USB storage device.
This TV cannot play back copy-protected files.
The On Screen Display on your model may be slightly different.
Supported music file: *.MP3
Bit rate range 32 kbps ~ 320 kbps
• Sampling rate
MPEG1 layer 3: 32 KHz ~ 48 KHz
USB
Screen Components
2
MENU
Select U S B.
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
ENTER
Select Music List.
ENTER
Music List
2
3
Page 2/3
No Marked
E
1
Title
Music
S003
Duration
Up Folder
Corresponding buttons on
the remote control
001. S001
03:33
003. S002
04:45
004. S003
01:30
006. S004
02:37
00:00/01:34
1
Up Folder
01:58
007. S005
E
Navigation
Popup Menu
4
66
CH
Page Change
Q.MENU
Option
MARK
Mark
Exit
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 67
Music Selection and PopUp Menu
As shown , up to 6 music titles are listed per page.
Music List
Page 2/3
No Marked
Title
Music
S003
Duration
Up Folder
00:00/01:34
001. S001
03:33
003. S002
04:45
004. S003
01:30
006. S004
02:37
01:58
007. S005
Up Folder
E
Navigation
Popup Menu
Page 2/3
Page Change
Q.MENU
Option
MARK
No Marked
Title
Music
S003
Duration
Up Folder
1366x768
125KB
001. S001
00:00/01:34
Up Folder
Exit
Mark
03:33
Play
003. S002
04:45
Play with Photo
004. S003
Mark All 01:30
006. S004
Delete
02:37
007. S005
Close
01:58
E
Navigation
1
2
3
4
Popup Menu
CH
Page Change
Q.MENU
Option
MARK
Mark
Exit
Select the target folder or drive.
Select the desired music title
ENTER
ENTER
Show the PopUp menu.
ENTER
USB
Music List
CH
P l a y (During stop) : Play the selected music
titles.
Once a music finishes playing, the next selected
one will be played. When there are no selected
music titles to play, the next one in the current
folder will be played.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected
one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
• Use the C H
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in the
folder will be played in sequence.
Select the desired PopUp menu.
67
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 68
USB
Using the Music List function, play
Music List
Page 2/3
No Marked
Title
Music
S003
Set Audio
Duration
Up Folder
00:00/01:34
Up Folder
001. S001
03:33
003. S002
04:45
004. S003
01:30
006. S004
02:37
007. S005
01:58
1
Q.MENU
USB
2
Popup Menu
CH
Page Change
Q.MENU
Option
Cinema
Auto Volume
Off
Clear Voice ll
Off
Balance
E
Navigation
Sound Mode
MARK
Mark
0
L
R
Exit
Prev.
Show the S o u n d M o d e.
Make appropriate adjustments.
■
If you don't press any button for a while during the playing,
the play information box (as shown in the below) will float as
a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period of
time.
! NOTE
When music is playing,
is displayed in back of the music title.
A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
If
G you press O K, A buttons, screen saver is stopped.
G This TV can not play music files less than 32 Kbytes.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G If you select “Off” for TV speaker, S e t A u d i o features in Choose Options will not work.
G
G
68
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 69
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
Supports up to four drives.
Extension name
Video Codec
Audio Codec
mpg, mpeg, mpe, vob, dat
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx,
Divx 5.xx, Divx 6.xx(Playback),
AC3,MPEG,MP3,PCM
Avi, divx, m4v
USB
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1 , MPEG2, MPEG4 (Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.xx , DivX
4.xx, DivX 5.xx , DivX VOD ( DRM ) , XviD, DivX 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital.
Sampling frequency : 32k ~ 48kHz
Bit rate : 32k ~ 320kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• Some user-created subtitles may not work properly.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• The video file and the subtitle file must be located in the same folder.
• The name of the video file and the subtitle file must be the same to view the subtitles normally.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Playing a video via a USB connection that does not support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Max bitrate of playable DivX is 4Mbps.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30 FPS
(720*480) depending on Resolution.
• Files of 25 FPS or 30 FPS of higher may not be played properly.
• Files encoded with GMC(Global Motion Compensation) may not be played.
• Certain video files created with an encoder may not be played.
• Some of subtitle files that are not ordered in sequence may not be display.
Resolution
720x576@25p
720x480@30p
Xvid
69
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 70
USB
Screen Components
1
2
Select U S B.
ENTER
ENTER
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked movie
title
Movie List
3
Page 2/3
No Marked
Title
Movie
H003
Duration
Up Folder
Corresponding buttons on the
remote control
4
Select Movie List.
E
MENU
H001
00:03:33
H002
00:04:45
H003
00:01:30
H004
00:03:13
640x480, 720KB
USB
1
Up Folder
00:02:51
H005
E
Navigation
Popup Menu
CH
Page Change
MARK
Mark
Exit
4
! NOTE
G
G
G
70
A DivX movie file and its subtitle file must be located in the same folder.
A video file name and its subtitle file name must be identical for it to be displayed.
Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly for some files while playing a movie.)
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 71
Movie Selection and PopUp Menu
As shown , up to 6 movie titles are listed per page.
Page 2/3
No Marked
Movie
E
Movie List
Duration
Title
H003
Up Folder
640x480, 720KB
Up Folder
H001
00:03:33
H002
00:04:45
H003
00:01:30
H004
00:03:13
00:02:51
H005
Popup Menu
Page 2/3
Page Change
No Marked
Movie
MARK
Mark
Duration
Title
H003
Exit
Up Folder
00:03:33
1366x768,
125KB
H001
640x480, 720KB
Up Folder
00:04:45
H002
Play
H003
Mark All00:01:30
H004
Delete 00:03:13
Close
H005
USB
Movie List
CH
E
Navigation
P l a y : Play the selected movie titles. Divx Play
is executed while screen changes.
G P l a y M a r k e d : Play the selected movie titles.
Once a movie finishes playing, the next selected one will be played automatically.
G M a r k A l l : Mark all movie titles in the folder.
G U n m a r k A l l : Deselect all marked movie titles.
G D e l e t e : Delete the selected movie titles.
G C l o s e : Close the pop-up menu.
G
E
00:02:51
E
Navigation
1
Page Change
MARK
Mark
Exit
• In the case of files not supported, a message
regarding non-supported file is displayed.
This file is invalid.
Select the desired movie titles.
ENTER
4
CH
Select the target folder or drive.
2
3
Popup Menu
ENTER
Show the PopUp menu.
ENTER
Select the desired PopUp menu.
71
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 72
USB
Using the Movie List function, play
Choose Options
Set Video Play.
Set Video.
Set Audio.
Prev.
Q. MENU Option
1
Q.MENU
Show the PopUp menu.
2
USB
ENTER
Select S e t V i d e o P l a y, S e t V i d e o or S e t A u d i o.
DivX Audio Language & Subtitle Language
Audio Language
P i c t u r e S i z e : Selects your desired picture format during movie play.
G A u d i o L a n g u a g e & S u b t i t l e L a n g u a g e : Changes the Language
Group of the audio/subtitle during movie play.
G S y n c : Adjusts the time synchronisation of the subtitle from -10 secs
~ +10 secs by steps of 0.5 secs during movie play.
G P o s i t i o n : Changes the position of the subtitle either up or down
during movie play.
G
Set Video Play.
Picture Size
F
Full Screen
1/8(AC3)
Subtitle Language
1/8
. Language
---
. Sync
---
. Position
---
G
Prev.
1
ENTER
2
ENTER
72
Show the P i c t u r e S i z e, A u d i o L a n g u a g e, or S u b t i t l e L a n g u a g e.
Make appropriate adjustments.
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 73
Subtitle Language
Support Language
Latin1
French, Spanish, Catalan Basque, Portuguese, Italian, Albanian, Rhaeto-Romanic, Dutch,
German, Danish, Swedish, Norwegian, Finnish, Faroese, Icelandic, Irish, Scottish, English
Latin2
Czech, Hungarian, Ploish, Romanian, Croatian, Slovak, Slovenian, Sorvian
Latin4
Estonian, the Baltic languages Latvian(Lettish) and Lithuanian, Greenlandic
and Lappish
Latin5
English, Trukish
Cyrillic
Bulgarian, Byelorussian, Macedonian, Russian, Serbian and pre-1990 (no ghe
with upturn) Ukrainian
Greek
English, modern Greek
Hebrew
English, modern Hebrew
Chinese
Chinese
Thai
Thai
Arabic
English, Arabic
! NOTE
G
G
USB
Some special characters are not supported in subtitles.
HTML tags are not supported in subtitles.
G Subtitles in languages other than the supported languages are not available.
G
When you select the S e t V i d e o ,
Set Video.
Picture Mode
Vivid
Contrast
100
Brightness
50
Sharpness
70
Color
70
Tint
0
R
G
Color Temperature
0
W
C
! NOTE
G
Noise Reduction
Auto Power Save
mode is not supported in Set Video function.
Medium
Picture Reset
Prev.
1
2
ENTER
Show the P i c t u r e M o d e.
ENTER
Make appropriate adjustments.
73
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 74
USB
G
When you select the S e t A u d i o ,
Set Audio
Sound Mode
Standard
Auto Volume
Off
Clear Voice ll
Off
Balance
0
L
R
Prev.
USB
1
Show the S o u n d M o d e, A u t o V o l u m e, C l e a r V o i c e I I and B a l a n c e.
ENTER
2
Make appropriate adjustments.
ENTER
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG > GGGGGG.
■
II
During playback, press the P a u s e( I I) button.
■ Still screen is displayed.
■
P L A Y ( G)
74
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y ( G) button to return to normal playback.
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 75
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
ENTER
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivX Reg.
Reg. Code
Code
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Deactivation
Move
i
ENTER
DivX(R) Video On Demand
Your registration code is : xxx xxxxxxx
To learn more visit www.divx.com/vod
Close
MENU
USB
1
Select U S B.
2
ENTER
Select Divx Reg. Code.
3
ENTER
Display D i v x R e g . C o d e.
• Press the M E N U / E X I T button to return to normal TV viewing.
• Press the B A C K button to move to the previous menu screen.
75
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 76
USB
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
USB
ABOUT DIVX VIDEO:DivX is a digital video format created by DivX,Inc.This is an official DivX Certified device that plays DivX video.Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:This DivX Certified device must be registered in
order to play DivX Video-on-Demand (VOD)content.To generate the registration
code, locate the DivX VOD section in the device setup menu.Go to vod.divx.com with
this
code to complete the registration process and learn more about DivX VOD.
DivX Certified to play DivX video,including premium content
“Pat.7,295,673;7,460,688;7,519,274 ”
! NOTE
Supported movie file
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx,
DivX5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback)
G When loading, some buttons may not work.
G If you use the DivX registration code of another device, the rented or purchased DivX file cannot be
played. Therefore always use the DivX registration code assigned to this product.
G
76
MFL62883001-Edit2-usb-ta 5/3/10 11:56 AM Page 77
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
OK
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
Deactivation
Deactivation
DivX Reg. Code
Deactivation
Deactivation
Move
OK
DivX(R) Video On Demand
i Do you want to deactivate your device?
Yes
No
USB
1
MENU
Select U S B.
2
ENTER
Select Deactivation.
3
ENTER
Select Y e s or N o.
4
ENTER
• Press the M E N U / E X I T button to return to normal TV viewing.
• Press the B A C K button to move to the previous menu screen.
77
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 78
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
■ RGB input source use 4:3 or 16:9 aspect ratio.
PICTURE
Move
Aspect Ratio
PICTURE
Enter
Picture Mode
: Vivid
• Contrast
Just Scan
70
• Sharpness
70
4:3
• Color
70
• Color
70
0
R
• Tint
G
PICTURE CONTROL
Select A s p e c t R a t i o.
Select the desired picture format.
4
EXIT
78
Zoom
R
G
Cinema
Zoom 1
Select P I C T U R E.
3
BACK
0
E
2
ENTER
16:9
• Sharpness
■
ENTER
100
• Brightness 50
E
MENU
: Vivid
• Contrast
100
• Brightness 50
• Tint
1
Enter
: 16:9
Energy Saving : Intelligent Sensor
Energy Saving : Intelligent Sensor
Picture Mode
Move
Aspect Ratio
: 16:9
Return to the previous menu.
Return to TV viewing.
■
You can also adjust A s p e c t R a t i o in
the Q . M E N U.
Press the R A T I O button repeatedly to
select the desired picture format.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 79
16:9
Zoom
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Choose Zoom when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Just Scan
Cinema Zoom1
Choose Cinema Zoom when you want to enlarge
the picture in correct proportion.
Note: When enlarging or reducing the pictrue,
the image may become distorted.
■
or button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1-16.
PICTURE CONTROL
Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.
Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.
J u s t S c a n operates only in
Component/HDMI/DVI(720p/1080i/1080p)
input source.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
79
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 80
PICTURE CONTROL
PRESET PICTURE SETTINGS (PICTURE MODE)
There are factory presets for picture settings available in the user menus. You can use a preset, change each
setting manually.
PICTURE
Aspect Ratio
Move
PICTURE
Enter
: 16:9
Picture Mode
: Vivid
• Contrast
: Vivid
• Contrast
100
PICTURE CONTROL
2
ENTER
• Sharpness
70
• Sharpness
70
• Color
70
• Color
70 Cinema
0
R
• Tint
G
E
Select P I C T U R E.
■
Select P i c t u r e M o d e.
■
3
ENTER
Select V i v i d, S t a n d a r d,
S p o r t, or G a m e.
Auto Power Save
, C i n e m a,
■
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
■
■
■
■
■
80
Standard
• Brightness 50
E
MENU
Vivid
100
• Brightness 50
• Tint
1
Enter
: 16:9
Energy Saving : Intelligent Sensor
Energy Saving : Intelligent Sensor
Picture Mode
Move
Aspect Ratio
Auto Power Save
0 RSport
G
Game
V i v i d, S t a n d a r d,
, C i n e m a,
S p o r t, and G a m e Settings are preset for
the optimum picture quality at the factory.
You can also adjust P i c t u r e M o d e in
the Q . M e n u.
V i v i d: This is the mode to maximize the
effect of the video in the retail store.
Strengthen the contrast, brightness,
sharpness and color for vivid picture.
S t a n d a r d: This is the mode to realize
optimum viewing condition for the general user.
: This mode maximizes reducting
the power consumption without hurting
the picture quality.
C i n e m a: This mode optimizes video for
watching movies.
S p o r t: This is the video mode to emphasize dynamic video and primary color (Ex,
white, uniform, grass, sky blue etc.) by
realizing the optimal screen for sports.
G a m e: This is the mode to realize fast
response speed in a fast gaming screen.
Auto Power Save
Auto Power Save
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 81
MANUAL PICTURE ADJUSTMENT (USER MODE)
Adjust the picture appearance to suit your preference and viewing situations.
PICTURE
Aspect Ratio
Move
Enter
: 16:9
Energy Saving : Intelligent Sensor
: Vivid
• Contrast
100
• Sharpness
70
• Color
70
• Tint
0
80
E
R
E
• Contrast
• Brightness 50
E
E
Picture Mode
Enter
G
E
1
MENU
Select P I C T U R E.
■
ENTER
Select P i c t u r e M o d e.
3
■
ENTER
Select V i v i d, S t a n d a r d,
S p o r t or G a m e.
4
ENTER
Auto Power Save
, C i n e m a,
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s,
C o l o r, T i n t or C o l o r T e m p e r a t u r e.
■
5
ENTER
Make appropriate adjustments.
■
6
■
BACK
Return to the previous menu.
■
EXIT
Return to TV viewing.
C o n t r a s t: Increase or decrease the gradient of the vidoe signal. You may use
Contrast when the bright part of picture
is saturated.
B r i g h t n e s s: Increases or decreases the
black level of video signal. You may use
Brightness when the black level of the
picture is not visible.
S h a r p n e s s: Adjusts the level of crispness in the edges between the light and
dark areas of the picture. The lower the
level, the softer the image.
C o l o r: Adjusts intensity of all colors.
T i n t: Adjusts the balance between red
and green levels.
C o l o r T e m p e r a t u r e: Set to warm to
enhance hotter colors such as red, or set
to cool to make picture bluish.
PICTURE CONTROL
2
81
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 82
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video seeing differently for each input.
To reset to the factory default after making adjustments to each input source, execute the P i c t u r e R e s e t
function for each Picture Mode.
PICTURE
Move
PICTURE
Enter
Move
Enter
E
E
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Color
70
• Color
• Tint
0
• Tint
• Color Temperature
0
W
70
Dynamic Contrast
0
Dynamic Color0
• Color Temperature
C
• Advanced Control
• Advanced
Control
Noise
Reduction
• Picture Reset
• Picture Reset
Gamma
Screen
Screen
F
W
Off
G
OffC
Off
Medium
Black Level
Low
Film Mode
Off
Close
PICTURE CONTROL
42/50PJ250R
1
MENU
Select P I C T U R E.
2
ENTER
Select A d v a n c e d C o n t r o l.
ENTER
Select your desired options.
3
4
Select your desired options.
5
BACK
EXIT
82
Return to the previous menu.
Return to TV viewing.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 83
Color Temperature
(Except 42/50PJ250R)
Dynamic Contrast
■
Set to warm to enhance hotter colors such as red, or set to cool to make picture
bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colors so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look
more vivid.
■
Reduces screen noise without compromising video quality.
Dynamic Color
Noise Reduction
Gamma
Low : Make dark and middle gray level area of the picture brighter.
Medium: Express original picture levels.
High: Make dark and middle gray level area of the picture darker.
■ You can adjust brightness of dark area and middle gray level area of the picture.
Film Mode
■
■
Makes video clips recorded in film look more natural.
DVD and Blu-ray movies are filmed at 24 frames per second.
PICTURE CONTROL
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Auto: Realizing the black level of the screen and set it to High or Low automatically.
■ Set black level of the screen to proper level.
■ This function enables to select 'Low' or 'High' in the following mode: TV, AV, HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
83
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 84
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g level or by setting the P i c t u r e
M o d e.
PICTURE
Aspect Ratio
Move
PICTURE
Enter
: 16:9
Aspect Ratio
Energy Saving : Intelligent Sensor
Picture Mode
Picture Mode
100
70
• Color
70
• Tint
0
R
G
E
1
MENU
2
ENTER
: Vivid
Intelligent Sensor
Off
100
Minimum
• Brightness 50
Medium
• Sharpness 70
Maximum
• Color
70
Screen Off
• Tint
0R
• Contrast
• Brightness 50
• Sharpness
Enter
Energy Saving : Intelligent Sensor
: Vivid
• Contrast
Move
: 16:9
G
E
Select P I C T U R E.
Select
E n e r g y S a v i n g.
PICTURE CONTROL
3
ENTER
Select I n t e l l i g e n t S e n s o r , O f f, M i n i m u m, M e d i u m, M a x i m u m or
Screen off .
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
Intelligent sensor?
This function automatically adjusts the brightness
of screen to the most suitable picture according to
the surrounding conditions.
■ You can also press the E N E R G Y S A V I N G botton on the remote control.
■ When selecting S c r e e n o f f, TV turned off
after 3 seconds.
■
84
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 85
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
Enter
Move
E
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Color
70
• Color
70
• Tint
0
• Tint
0
• Color Temperature
0
• Color Temperature
0
W
C
• Advanced Control
MENU
Select P i c t u r e R e s e t.
3
ENTER
Initialize the adjusted value.
C
i
Resetting video configuration...
PICTURE CONTROL
2
ENTER
• Picture Reset
Screen
Select P I C T U R E.
W
• Advanced Control
• Picture Reset
Screen
1
Enter
E
• Brightness
4
EXIT
Return to TV viewing.
85
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 86
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use
Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
E
PICTURE CONTROL
1
MENU
2
ENTER
3
ENTER
E
Select O P T I O N.
■
Select I S M M e t h o d.
■
Select N o r m a l, O r b i t e r, C o l o r
W a s h or W h i t e W a s h.
4
BACK
EXIT
Enter
: English
■
Return to the previous menu.
Return to TV viewing.
■
Normal
Orbiter
Color Wash
White Wash
N o r m a l: If image sticking is never a
problem, ISM is not necessary - set to
Normal.
O r b i t e r : Orbiter may help prevent
ghost images. However, it is best not to
allow any fixed image to remain on the
screen. To avoid a ghost image on the
screen, the image will move every 2 minutes.
C o l o r W a s h: The color block with the
screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred
while the temporary afterimage is
removed and the color pattern is operating.
W h i t e W a s h : White Wash removes
ghost images from the screen. Use sparingly. Watch the TV normally for a while
before using this feature to see if the
ghost image disappears on its own.
! NOTE
G
86
An excessive ghosted image may be impossible to
clear entirely with Color Wash and White Wash.
To return to normal viewing, press any button.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 87
DEMO MODE
Use it to see the difference between XD Demo on and XD Demo off.
M o d e S e t t i n g - H o m e U s e”.
This feature is disabled in “M
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off Off
E
E
Off
On
On
PICTURE CONTROL
1
MENU
2
ENTER
3
ENTER
Select O P T I O N.
Select D e m o M o d e.
Select O n .
D e m o M o d e starts.
4
EXIT
Return to TV viewing.
If you want to stop the demo, press any button.
87
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 88
PICTURE CONTROL
INITIAL SETTING (FACTORY RESET)
Use to quickly reset all the menu options to their original factory preset values.
All user settings and channel settings will be reset.
OPTION
Move
Enter
OPTION
E
PICTURE CONTROL
MENU
2
SIMPLINK
Key Lock
: Off
Key Lock
Caption
: Off
Caption
Set ID
:1
Set ID
: 1reset.
ISM Method
: Normal
ISM Method
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
: Normal
Still continue?
: Off
YesUse
: Home
Select O P T I O N.
ENTER
Select I n i t i a l S e t t i n g.
ENTER
Select Y e s or N o.
3
4
BACK
EXIT
88
Enter
: On
Initial Setting
1
Move
E
SIMPLINK
Return to the previous menu.
Return to TV viewing.
Initial Setting
: On
: Off
!
: Off
All user settings and channel settings will be
No
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 89
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (AUTO VOLUME)
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every
time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic
adjustments for each program.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
3
-
+
0
L
R
: Standard
MENU
: Off
Enter
Off
On
• Level
Balance
3
-
+
0
L
R
: Standard
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Select A U D I O.
Select A u t o V o l u m e.
ENTER
Select O n or O f f.
3
Return to the previous menu.
BACK
Return to TV viewing.
EXIT
Clear Voice ll
Sound Mode
ENTER
4
: Off
SOUND & LANGUAGE CONTROL
2
Move
Auto Volume
• Infinite Sound : Off
E
1
AUDIO
Enter
89
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 90
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
AUDIO
Enter
3
-
+
0
L
R
: Standard
: Off
Clear Voice ll
: Off
Balance
Sound Mode
MENU
2
Enter
Off
• Level
3
-
0
L
On
+
R
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1
Move
Auto Volume
E
Select A U D I O.
Select C l e a r V o i c e I I.
ENTER
SOUND & LANGUAGE CONTROL
3
ENTER
Select O n or O f f.
■
Adjustment for Clear Voice ll Level
With selecting On
This feature adjusts the voice level.
4
ENTER
Select L e v e l.
ENTER
Make appropriate adjustments.
5
6
BACK
EXIT
90
■
Return to the previous menu.
Return to TV viewing.
C l e a r V o i c e I I - O n”,
If you select “C
I n f i n i t e S o u n d feature will not work.
The adjustment range is -6 ~ 6.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 91
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the program content.
S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
AUDIO
Enter
3
-
+
0
L
R
: Standard
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
50
• Bass
50
MENU
Select S o u n d M o d e.
■
■
3
ENTER
4
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
Return to the previous menu.
■
■
BACK
■
Return to TV viewing.
EXIT
R
You can also adjust S o u n d M o d e in
the Q . M E N U.
S t a n d a r d: Offers standard-quality
sound.
M u s i c: Optimizes sound for listening
to music.
C i n e m a: Optimizes sound for watching
movies.
S p o r t: Optimizes sound for watching sports
events.
G a m e: Optimizes sound for playing
games.
SOUND & LANGUAGE CONTROL
ENTER
+
Select A U D I O.
■
2
-
0 L
Standard
• Treble
E
1
: Standard
3
Enter
Music
• Infinite Sound : Off
Cinema
50
Sport
• Bass
50
Game
E
• Infinite Sound : Off
• Treble
Move
Auto Volume
91
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 92
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
Enter
3
-
+
0
L
R
AUDIO
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
: Standard
• Infinite Sound : Off
50
• Bass
50
E
Enter
3
-
+
0
L
R
: Standard
• Infinite Sound : Off
•Infinite Sound
50
•Treble
50
• Bass
50
•Bass
50
E
• Treble
Off
E
• Treble
Move
Auto Volume
Close
1
MENU
Select A U D I O.
2
ENTER
Select S o u n d M o d e.
ENTER
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
ENTER
Select T r e b l e or B a s s.
ENTER
Make appropriate adjustments.
3
SOUND & LANGUAGE CONTROL
4
5
6
BACK
EXIT
92
Return to the previous menu.
Return to TV viewing.
E
AUDIO
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 93
INFINITE SOUND
Select this option to sound realistic.
Adjust the sound to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
Enter
3
-
+
0
L
R
AUDIO
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
: Standard
• Bass
50
3
-
+
0
L
R
: Standard
E
50
Enter
• Infinite Sound : Off
•Infinite Sound
50
•Treble
50
• Bass
50
•Bass
50
E
• Infinite Sound : Off
• Treble
Move
Auto Volume
Off
E
AUDIO
• Treble
E
Close
MENU
Select A U D I O.
2
ENTER
Select I n f i n i t e S o u n d.
ENTER
Select O n or O f f.
3
4
■
BACK
EXIT
Return to the previous menu.
If sound quality or volume is not at the level
you want, it is recommended to use a separate
home theater system or amp to cope with different user environments.
SOUND & LANGUAGE CONTROL
1
Return to TV viewing.
93
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 94
SOUND & LANGUAGE CONTROL
BALANCE
Adjust the left/right sound of speaker to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Sound Mode
3
-
+
0
L
R
: Standard
MENU
2
SOUND & LANGUAGE CONTROL
94
Clear Voice ll
: Off
• Level
Balance
-
+
0
L
BalanceR
• Infinite Sound : Off
• Treble
50
• Bass
50
• Bass
50
ENTER
Make appropriate adjustments.
3
4
Return to the previous menu.
Return to TV viewing.
0
: Standard
50
Select A U D I O.
Enter
3
• Infinite Sound : Off
Select B a l a n c e.
EXIT
: Off
• Treble
ENTER
BACK
Move
Auto Volume
Sound Mode
E
1
AUDIO
E
Balance
Enter
E
Close
L
R
E
AUDIO
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 95
TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.
In A V, C o m p o n e n t, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even
when there is no video signal.
AUDIO
Move
Enter
AUDIO
Move
E
E
Balance
0
Sound Mode
L
: Standard
R
Balance
Sound Mode
0
L
• Infinite Sound : Off
• Infinite Sound : Off
50
• Treble
50
• Bass
50
• Bass
50
: On
R
: Standard
• Treble
• Reset
TV Speaker
Enter
• Reset
TV Speaker
: On
Off
On
1
Select A U D I O.
MENU
Select T V S p e a k e r.
ENTER
3
Select O n or O f f.
ENTER
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
SOUND & LANGUAGE CONTROL
2
! NOTE
G
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the home theater speaker, but when the TV speaker is turned on, the sound outputs
to the TV speaker.
95
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 96
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
Enter
AUDIO
Move
E
E
Balance
Sound Mode
0
L
R
Balance
Sound Mode
: Standard
• Bass
50
• Bass
: On
SOUND & LANGUAGE CONTROL
96
Select A U D I O.
2
Select R e s e t.
3
ENTER
Initialize the adjusted value.
4
EXIT
R
• Infinite Sound : Off
Resetting sound configuration...
• Treble
50
1
ENTER
L
50
i
• Reset
• Reset
MENU
0
: Standard
• Treble
• Infinite Sound : Off
TV Speaker
Enter
Return to TV viewing.
TV Speaker
: On
50
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 97
STEREO/SAP BROADCAST SETUP
For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used
if the broadcast is only in Mono.
Q.Menu
Aspect Ratio
16:9
Vivid
Sound Mode
Standard
Caption
G
Off
SAP
CH
F
Picture Mode
STEREO
Sleep Timer
Off
Del/Add/Fav
Delete
USB Eject
Eject
Close
Except 42/50PJ250R
Q.MENU
2
Select S A P.
Select M O N O, S T E R E O, or S A P.
3
EXIT
Return to TV viewing.
SOUND & LANGUAGE CONTROL
1
97
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 98
SOUND & LANGUAGE CONTROL
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Input Label
English
SIMPLINK
: On
SIMPLINK
: Off
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
Demo Mode
: Off
Demo Mode
E
Enter
: English
Menu Language
Español
Portugués
: Normal
: Off
E
Confirm
1
MENU
SOUND & LANGUAGE CONTROL
2
ENTER
3
ENTER
4
Select O P T I O N.
Select M e n u L a n g u a g e.
Select your desired language.
From this point on, the on-screen menus will
be shown in the selected language.
Return to the previous menu.
BACK
Return to TV viewing.
EXIT
98
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 99
CLOSED CAPTIONS
Closed captioning is a process which converts the audio portion of a television program into written words which then
appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs,
program dialogue can be arranged into captions in advance. Its possible to caption a live
program by using a process called real-time captioning, which creates
captions instantly. Real-time captioning is normally done by professional reporters using
a machine shorthand system and computer for translation into English.
FOLLOW ME
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching
language skills.
• The picture at left shows a typical caption.
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast four different caption signals on the same channel. By selecting Mode1 to Mode2,
you can choose which signal you view. Mode1 is usually the signal with the captions, while another mode might show
demonstration or programming information.
• Your TV might not receive caption signals normally in the following situations.
OPTION
Menu Language
Move
Enter
: English
Move
Menu Language
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: On
Caption
: on
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal Mode
Demo Mode
: Off
Demo Mode
1
MENU
Select O P T I O N.
ENTER
Select C a p t i o n.
ENTER
Select O n or O f f.
F
On
Mode1
: Off
E
2
Enter
: English
Close
G
SOUND & LANGUAGE CONTROL
Input Label
OPTION
3
4
2 or T e x t 1 -2
2.
Select M o d e1 -2
5
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
99
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 100
TIME SETTING
CLOCK SETTING
Clock Setup
You must set the time correctly before using on/off timer function.
TIME
Move
TIME
Enter
Clock
1
: Off
Off Time
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Select T I M E.
ENTER
Select C l o c k.
ENTER
Select and set H o u r or M i n u t e.
TIME SETTING
3
4
Return to the previous menu.
BACK
Return to TV viewing.
EXIT
100
■
Enter
Hour
Off Time
MENU
2
Move
Clock
: Off
F
2AM
G
--
Minute
Close
If this TV is unplugged once or turn off with the
(power) button on the TV, reset the Clock function.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 101
ON/OFF TIME SETTING
This function operates only if the current time has been set.
The O f f T i m e function overrides the O n T i m e function if they are both set to the same time.
The TV must be in standby mode for the O n T i m e to work.
If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will
automatically revert to standby mode.
TIME
Move
Enter
TIME
Clock
Move
Enter
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: 2:10 AM
Sleep Timer
: Off
Sleep Timer
2:10 AM
F
: Off
Hour
On
G
2 AM
Minute
10
Channel
TV 2
Volume
30
Close
1
MENU
Select T I M E.
■
ENTER
Select O f f t i m e or O n t i m e.
3
ENTER
■
Select and set H o u r or
M i n u t e.
To cancel O n / O f f T i m e function, select O f f.
TIME SETTING
2
Only for On Time function
4
ENTER
Select and set C h a n n e l or V o l u m e.
5
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
101
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 102
TIME SETTING
SLEEP TIMER SETTING
The Sleep Time turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME
Move
Enter
Clock
TIME
Move
Enter
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Off
10 min.
20 min.
30 min.
60 min.
90 min.
120 min.
180 min.
240 min.
1
MENU
2
ENTER
TIME SETTING
3
ENTER
Select T I M E.
Select S l e e p T i m e r.
Make appropriate adjustments.
■
4
Return to the previous menu.
BACK
Return to TV viewing.
EXIT
102
■
You can also adjust S l e e p T i m e r in
the Q . M E N U .
Press the S L E E P button repeatedly to
select the number of minutes. (Except
42/50PJ250R)
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 103
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
*This feature is not available for all models.
■
The remote control
doesn’t work
Power is suddenly
turned off
Is the sleep timer set?
Check the power control settings. Power interrupted.
■ TV will be automatically turned off, in case of no signal for 15 minutes.
■
■
The video does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
Picture appears slowly
after switching on
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and a VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
■
Horizontal/vertical bars
or picture shaking
■
APPENDIX
No or poor color
or poor picture
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
■
■
Check antenna (Change the direction of the antenna).
■
Check HDMI cable over version 1.3.
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen
display. In this case use the latest cables that support HDMI version 1.3.
103
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 104
APPENDIX
The audio does not work.
Press the VOL or VOLUME button.
Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
■
Picture OK & No sound
No output from one
of the speakers
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
Unusual sound from
inside the product
No sound
when connecting HDMI
or USB
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
■ Use normal MP3 file.
■
■
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
APPENDIX
104
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable
or single color
■
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
■
Work the Auto configure or adjust size, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
■
■
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 105
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
105
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 106
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
50PJ250R
(50PJ250R-MA)
Dimensions
(Width x Height
x Depth)
With stand
988 x 688.5 x 260 mm
38.8 x 27.1 x 10.2 inches
1171.4 x 781.8 x 309.7 mm
46.1 x 30.7 x 12.1inches
Without stand
988 x 617.8 x 55.3 mm
38.8 x 24.3 x 2.1inches
1171.4 x 720.9 x 55.3 mm
46.1 x 28.3 x 2.1inches
Weight
With stand
Without stand
21.6 kg / 47.6 lbs
20.0 kg / 44.0 lbs
30.0 kg / 66.1 lbs
27.6 kg / 60.8lbs
42PJ350R
50PJ350R
(42PJ350R-MA)
(50PJ350R-MA)
988 x 688.5 x 260 mm
38.9 x 27.1 x 10.2 inches
1171.4 x 781.8 x 309.7 mm
46.1 x 30.7 x 12.2inches
988 x 617.8 x 55.3 mm
38.8 x 24.3 x 2.2inches
1171.4 x 720.9 x 55.3 mm
46.1 x 28.4 x 2.2inches
21.6 kg / 47.6 lbs
20.0 kg / 44.0 lbs
30.0 kg / 66.1 lbs
27.6 kg / 60.8 lbs
MODELS
Dimensions
(Width x Height
x Depth)
With stand
Weight
With stand
Without stand
Without stand
Power requirement
Television System
Program Coverage
External Antenna Impedance
Environment
condition
APPENDIX
106
42PJ250R
(42PJ250R-MA)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
AC100-240V ~ 50/60Hz
NTSC, PAL-M/N
VHF 2-13, UHF 14-69, CATV 1-125
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 107
MODELS
50PJ260R
(42PJ260R-MA)
(50PJ260R-MA)
1171.4 x 781.8 x 309.7 mm
46.1 x 30.7 x 12.1inches
Dimensions
(Width x Height
x Depth)
With stand
988 x 688.5 x 260 mm
38.8 x 27.1 x 10.2 inches
Without stand
988 x 617.8 x 55.3 mm
38.8 x 24.3 x 2.1inches
1171.4 x 720.9 x 55.3 mm
46.1 x 28.3 x 2.1inches
Weight
With stand
Without stand
21.6 kg / 47.6 lbs
20.0 kg / 44.0 lbs
30.0 kg / 66.1 lbs
27.6 kg / 60.8lbs
MODELS
Dimensions
(Width x Height
x Depth)
With stand
Weight
With stand
Without stand
Without stand
Power requirement
Television System
Program Coverage
External Antenna Impedance
Environment
condition
Operating Temperature
Operating Humidity
50PK550R
60PK550R
(50PK550R-MA)
(60PK550R-MA)
1171.4 x 786.2 x 309.7 mm
46.1 x 30.9 x 12.1 inches
1392 x 915 x 367 mm
54.8 x 36 x 14.4 inches
1171.4 x 724.4 x 55.3 mm
46.1 x 28.5 x 2.1 inches
1392 x 852 x 55.3 mm
54.8 x 33.5 x 2.1 inches
31kg / 68.3 lbs
28.6 kg / 63.0 lbs
49.5 kg / 109.1 lbs
45.0 kg / 99.2 lbs
AC100-240V ~ 50/60Hz
NTSC, PAL-M/N
VHF 2-13, UHF 14-69, CATV 1-125
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
Storage Temperature
Storage Humidity
■
42PJ260R
107
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 108
APPENDIX
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
9 ms
4.5 ms
APPENDIX
■
Repeat code
0.55 ms
9 ms
■
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
■
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
108
MFL62883001-Edit3-en 5/14/10 11:06 AM Page 109
Code
(Hexa)
Function
Note
08
POWER
Remote control Button (Power On/Off)
45
Q.MENU
Remote control Button
43
MENU
Remote control Button
0B
INPUT
Remote control Button
10-19
Number Key 0-9
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL -
Remote control Button
00
CH
Remote control Button
01
CH
Remote control Button
1E
FAV/MARK
Remote control Button
40
Remote control Button
41
Remote control Button
07
Remote control Button
06
Remote control Button
X STUDIO
Remote control Button
44
ENTER
Remote control Button
28
BACK
Remote control Button
7E
SIMPLINK
Remote control Button
30
AV MODE
Remote control Button
79
RATIO
Remote control Button
95
ENERGY SAVING
Remote control Button
53
LIST
Remote control Button
1A
Q.VIEW
Remote control Button
BA
FREEZE
Remote control Button
72
RED
Remote control Button
63
YELLOW(PLAY)
Remote control Button
61
BLUE (PAUSE)
Remote control Button
71
GREEN (STOP)
Remote control Button
8F
Rew FF
Remote control Button
8E
FF GG
Remote control Button
5E
CLEAR VOICE ll
Remote control Button
B1
Stop A
Remote control Button
B0
Play G
Remote control Button
0F
TV
Remote control Button
5B
EXIT
Remote control Button
Except 42/50PJ250R
APPENDIX
7C
For 42/50PJ250R
109
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 110
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the TV’s functions externally.
■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.
The instructions below are provided to help with programming software or to test functionality using telenet
software.
■ In USB and Bluetooth mode, it doesn’t support RS-232C function.
■
Image shown may differ from your TV.
APPENDIX
110
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
PR
L
AUDIO
R
2
(CONTROL&SERVICE)
Type of Connector; D-Sub 9-Pin Male
No.
1
PC
ANTENNA
IN
R
RS-232C IN
IN1
HDMI/DVI IN
1
L
VIDEO
R AUDIO L(MONO)
VARIABLE AUDIO OUT
2
RGB (PC)
VIDEO
AV
AUDIO IN
(RGB/DVI)
HDMI IN
PB
Y
COMPONENT IN
RS-232C Setup
Communication Parameters
Baud rate : 9600 bps (UART)
■ Data length : 8 bits
■ Parity : None
■ Stop bit : 1 bit
■ Communication code : ASCII code
■ Use a crossed (reverse) cable.
■
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 111
RS-232C Configurations
Either cable below can be used.
7-Wire Configuration
(Serial female-female NULL modem cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
Set ID
F
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
E
E
1
G
APPENDIX
ISM Method
Close
1
MENU
Select O P T I O N.
2
ENTER
3
ENTER
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is
1~99.
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
* Real data mapping 1
00 : Step 0
A : Step 10
F : Step 15
10 : Step 16
* Real data mapping 2
00: -30
01: -29
02: -28
1E:
0
28: +10
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
3A : +28
3B : +29
3C : +30
4E: N/A
4F : N/A
50: N/A
FE : Step 254
FF : Step 255
111
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 112
APPENDIX
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 ~ 01
02. Aspect Ratio
k
c
Refer to p.113
COMMAND1 COMMAND2
DATA
(Hexadecimal)
14. Colour Temperature
x
u
00 ~ 64
15. Treble
k
r
00 ~ 64
00 ~ 64
03. Screen Mute
k
d
00 ~ 01, 10
16. Bass
k
s
04. Volume Mute
k
e
00 ~ 01
17. Abnormal Status
k
z
FF
05. Volume Control
k
f
00 ~ 64
18. ISM Method
j
p
Refer to p.115
06. Contrast
k
g
00 ~ 64
19. Auto Configure
j
u
01
07. Brightness
k
h
00 ~ 64
20. Energy Saving
j
q
00 ~ 04
08. Colour
k
i
00 ~ 64
21. Tune Command
m
a
Refer to p.116
09. Tint
k
j
00 ~ 64
22. Channel Add/Del
m
b
00 ~ 01
10. Sharpness
k
k
00 ~ 64
23. Key
m
c
Refer to p.116
11. OSD Select
k
k
l
m
00 ~ 01
24. Input select (Main)
x
b
Refer to p.117
k
t
00 ~ 64
12. Remote Control Lock
/Key Lock Mode
13. Balance
00 ~ 01
Transmission / Receiving Protocol
Transmission
OK Acknowledgement
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK/NG][Data][x]
[Command 1] : First command to control the set.(z)
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
[Command 2] : Second command to control the set.
APPENDIX
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected TV is
controlled. Set ID is indicated as decimal (1~ 99)
on menu and as Hexadecimal (0x0~ 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
112
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this format
when receiving abnormal data form non-viable functions or
communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will send the ‘a’, ‘b’.
[NG]: use the large character.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 113
0 5 . Volume Control (Command: k f)
0 1 . Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.”
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom
Data 10~1F: Cinema Zoom1~ 16
Data 09: Just Scan
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p)mode, Just Scan
is available.
0 3 . Screen Mute (Command: k d)
To select screen mute on/off.
Data 00 : Screen mute off (Picture/Panel on)
Data 01 : Screen mute on (Panel off)
Data 10 : Video mute on (Picture Off)
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Color (Command: k i)
To adjust the screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
APPENDIX
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’.
Refer to ‘Real data mapping 1’.
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
In case of Video-Out mute on only, TV will display On
Screen Display(OSD) But, In case of Screen Mute On, TV
will not display OSD.
04. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Refer to ‘Real data mapping 1’.
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
113
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 114
APPENDIX
10. Sharpness (Command: k k)
15. Treble (Command: k r)
To adjust the screen sharpness.
To adjust treble.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’.
Refer to ‘Real data mapping 1’.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
To adjust bass.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
17. Abnormal State (Command: k z)
12. Remote Control Lock/Key Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
(If you’re not using the remote control and front
panel controls on the TV, use this mode. When main
power is on/off, remote control lock is released.)
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
13. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
APPENDIX
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
14. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust Color Temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data W50 : 00 ~ C50 : 64
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
114
To recognize an abnormal state.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
* This function is “read only”.
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 115
18. ISM Method (Command: j p)
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
MSB
0
LSB
0
0
0
0
0
0
0
Orbiter
White Wash
Normal
Color Wash
7
6 5
1
4
0
3
2
1
0
Function
0
0
1
0
Orbiter
0
1
0
0 White Wash
1
0
0
0
Normal
0
0
0
0
Color Wash
Data 02: Orbiter
Data 04: White Wash
Data 08: Normal
Data 20: Color Wash
* More two kinds of function can not be set at a time.
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
1 9 . A u t o C o n f i g u r e ( C o m m a n d : j u ) -Except 42/50PJ250R
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
20. Energy Saving (Command: j q)
* Real data mapping 1
00 : Step 0
A : Step 10
To reduce the power consumption of the TV.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
F : Step 15
10 : Step 16
* Real data mapping 2
00: -30
01: -29
02: -28
1E:
APPENDIX
Transmission [j][u][ ][Set ID][ ][Data][Cr]
0
28: +10
Data 00: Off
Data 01: Energy Saving Minimum
Data 02: Energy Saving Medium
Data 03: Energy Saving Maximum
Data 05: Screen Off
Data 10: Intelligent Sensor
64 : Step 100
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
FE : Step 254
FF : Step 255
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
3A : +28
3B : +29
3C : +30
4E: N/A
4F : N/A
50: N/A
115
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 116
APPENDIX
21 . Channel Tuning (Command: m a)
Tune Channel to following Physical/ major/ minor number.
Transmission Data0 :[m ][a ][ ][Set ID ][][Data0] [ ]
[Data1][ ][Data2 ][Cr ]
Data0 :Physical Channel Number(Transmit by Hexadecimal code)
NTSC air:02-45
NTSC cable:01,0e~7d
Data1,Data2 :Major Channel(two part)or Channel
Number(one part)
Data1 :High byte
Data2 :Low Byte
Two part channel number: Major number-Minor number One
part channel number:
In case of using one part channel number, minor channel does
not need.
Data3,Data4 :Minor Channel Number
Not needed for NTSC
Data3 :High byte
Data4 :Low Byte
Data5 :Attribute
7
Main/Sub
Picture
6
Two/One
Part Channel
5
Using Physical Channel
0
Main
0
Two
0
1
Sub
1
One
1
4
Reserved
3
2
1
0
7
Use
X
0
0
0
0
NTSC air
No Use
X
0
0
0
1
NTSC cable
APPENDIX
Example)
1. Analog channel:NTSC cable,channel number(35),main picture
Command:ma oo 23 xx xx xx xx 01
attribute(0x01):main picture,two part(it's not mandatory),
using physical channel, NTSC cable xx' data: don't care major
and minor channel number in case analog channel tuning.
Acknowledgement [a ][][Set ID ][][OK ][Data0][Data1]
[Data2 ][Data3 ][Data4 ][Data5 ][x ][a]
[ ][Set ID ][ ][NG ][Data0 ][x ]
22. Channel Add/Del(Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Channel Delete
01 : Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
23. K e y (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 109.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
116
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 117
24. Input select (Command: x b)
(Main Picture Input)
To select input source for TV
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data: Structure
MSB
0
LSB
0
0
0
External Input
0
0
0
0
Input Number
External Input
Data
Analog
0
0
0
1
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Input Number
Except 42/50PJ250R
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
117
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 118
MFL62883001-Edit3-en 5/3/10 11:57 AM Page 119
OWNER’S MANUAL
PLASMA TV
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
SERIAL
42PJ250R
50PJ250R
42PJ350R
50PJ350R
42PJ260R
50PJ260R
50PK550R
60PK550R
P/NO : MFL62883002 (1005-REV00)
www.lg.com
Download PDF