LG | 42PQ60R | LG 42PQ60R Owner’s Manual

MFL58486302-Edit1-en 9/2/09 11:44 AM Page 1
PLASMA TV
OWNER’S MANUAL
42PQ10R
50PQ10R
42PQ60R
50PQ60R
42PQ20R
50PS80BR
60PS80BR
42PQ30R
50PQ30R
Please read this manual carefully before operating
your set and retain it for future reference.
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
Model:
Serial:
P/NO : MFL58486302 (0907-REV03)
Printed in Korea
www.lge.com
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 2
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
1
2
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
7
Only use attachments/accessories specified by
the manufacturer.
8
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
9
Unplug this apparatus during lighting storms
or when unused for long periods of time.
10
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Do not use this apparatus near water.
Clean only with dry cloth.
3
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
4
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers)that produce
heat.
5
6
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
3
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 4
SAFETY INSTRUCTIONS
4
11
Never touch this apparatus or antenna during
a thunder or lighting storm.
12
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
13
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
14
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
Ow
ne
r
Ma
nu
al
15
WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product
near flammable objects such as gasoline or
candles or expose the TV to direct air
conditioning.
16
Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
17
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
Short-circuit
Breaker
18
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
19
As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 5
20
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
21
Moving
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
22
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
23
If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the power
cord contact an authorized service center.
24
Do not press strongly upon the panel with
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
25
Keep the product away from direct sunlight.
5
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 6
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Favorite Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Favorite Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cable Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Securing the TV to the wall to prevent falling when
the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bluetooth? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting the bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Set TV PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Bluetooth headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Managing Registered Bluetooth device . . . . . . . . . . . . . 57
My Bluetooth Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Viewing the photos with Bluetooth device . . . . . . . . 59
Listening the Musics with Bluetooth device . . . . . . . 59
EXTERNAL EQUIPMENT SETUP
USB
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Variable Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Monitor Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
BLUETOOTH
PICTURE CONTROL
WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Initializing Setup (Mode Setting) . . . . . . . . . . . . . . . . . . . . . . 36
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Channel Setup
- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
- Add / Delete Channel (Manual Tuning) . . . . . . 41
- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 72
Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 74
Manual Picture Adjustment (User Mode) . . . . . . . . . . 75
Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 76
Energy Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Power Saving Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Image Sticking Minimization (ISM) Method . . . . . . 80
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Initial Setting (Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 7
SOUND & LANGUAGE CONTROL
Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 83
Clear Voice ll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 85
Sound Setting Adjustment - User Mode
- SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Selecting Audio Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
On-Screen Menus Language Selection . . . . . . . . . . . . . 92
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
TIME SETTING
Clock Setting
- Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
External Control Through RS-232C . . . . . . . . . . . . . . . .104
7
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 8
FEATURE OF THIS TV
■
This feature is not available for all models.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
“DivX Certified to play DivX video, including premium
content”
Manufactured under license from Dolby Laboratories.
“Dolby “and the double-D symbol are trademarks of
Dolby Laboratories.
Listen to TV with wireless headset, or enjoy viewing
your mobile phone photos on your TV.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device
that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN
■
■
■
8
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV
for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma).
Image burn can also occur on the letterboxed
areas of your TV if you use the 4:3 aspect
ratio setting for an extended period.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 9
PREPARATION
ACCESSORIES
RA
TIO
A
Q.
SL
EE
ME P
NU
PO
W
ME
NU
ER
IN
PU
EN
ER
GY
T
SA
VIN
AV
G
RA
TI
MO O
DE
PO
W
ER
1
EN
TE
R
RET
4
UR
N
L
MU
TE
ZE
MO
6
9
Q.VIE
W
MU
TE
P
CH
3
E
EN
A
G
P
TE
6
R
1.5V 1.5V
ME
NU
9
Q.VIE
W
L
3
8
0
VO
A
G
5
LIS
T
DE
E
5
8
0
EE
AV
CH
2
7
LIS
T
FR
7
MA
R
FA K
V
VO
1
4
POWE INPU
R SA T
VIN
G
2
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
The accessories included may differ from the images below.
TE
Q.ME XT
NU
T.O
PT
RE
TU
FR
EE
ZE
RN
FA
V
or
Owner’s Manual
Remote Control
Batteries
(Some models)
Power Cord
or
x4
x2
Bolts for stand assembly
(Except 60PS80BR)
(Refer to P.13)
Protection Cover
(Refer to P.13)
Cable Management Clip
(For 50/60PS80BR)
(Refer to P.14 )
Ferrite core
(For 60PS80BR)
Cable Holder
(Refer to P.14)
RF Adapter
(Some models)
You must connect it to the antenna
wire after fixing in Antenna Input.
This adapter is only supplied in
A r g e n t i n a.
* Wipe spots on the exterior only with
the polishing cloth.
* Do not wipe roughly when removing
stain. Excessive pressure may cause
(Not included with all models.) scratch or discoloration.
Polishing Cloth
For 60PS80BR
Use of ferrite core
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
9
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 10
PREPARATION
FRONT PANEL INFORMATION
■
Image shown may differ from your TV.
42/50PQ10R
PREPARATION
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
ENTER
MENU
INPUT
ENTER
Button
MENU
Button
INPUT
Button
VOL
CH
VOLUME
(-, +) Buttons
MENU
INPUT
CHANNEL
(E,D)Buttons
ENTER
POWER
Button
VOL
CH
42PQ20R
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
INPUT
INPUT
Button
10
MENU
MENU
Button
ENTER
ENTER
Button
VOL
CH
INPUT
VOLUME
(-, +) Buttons
INPUT
MENU
MENU
OK
CHANNEL
(E,D)Buttons
ENTER
VOL
VOL
POWER
Button
CH
CH
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 11
42/50PQ30R
Remote Control Sensor/
Intelligent Sensor
Adjusts picture according to the
surrounding conditions.
INPUT
INPUT
Button
MENU
INPUT
ENTER
MENU
VOL
ENTER
MENU
Button
ENTER
Button
VOL
CH
VOLUME
(-, +) Buttons
PREPARATION
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
POWER
Button
CHANNEL
(E,D)Buttons
CH
42/50PQ60R
CH
CH
INPUT
INPUT
MENU
ENTER
ENTER
MENU
VOL
L
VO
CH
VOL
CH
Remote Control
Sensor/
Intelligent Sensor
Adjusts picture according to the
surrounding conditions.
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates white when the TV is switched on
and goes out slowly.
VOL
CHANNEL (E,D)
Buttons
VOLUME (+, -)
Buttons
ENTER Button
ENTER
MENU Button
MENU
INPUT Button
INPUT
POWER Button
50/60PS80BR
Intelligent Sensor
Adjusts picture
according to the surrounding conditions.
Remote Control
Sensor
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
CAUTION
G
G
G
When the TV cannot be turned on with the remote control, press the
(power) button on the TV.(The
remote control will not work when the
(power) button is switched off.)
(some models)
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. (For 50/60PS80BR)
Do not drag the TV. The floor or the product may be damaged. (For 50/60PS80BR)
11
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 12
PREPARATION
BACK PANEL INFORMATION
■
42/50PQ60R,
50/60PS80BR
42PQ20R,
42/50PQ30R
Image shown may differ from your TV.
USB IN
VIDEO L/MONO AUDIO R
B
R
COMPONENT IN
IN
IN
VIDEO
1
4
6
6
RS-232C IN
(CONTROL & SERVICE)
AUDIO
AV
USB IN
SERVICE ONLY
2
8
AV IN 2
ANTENNA
IN
4
VIDEO L/MONO AUDIO R
USB IN
8
For 42/50PQ10R
- AUDIO - ( MONO) VIDEO
PREPARATION
9
HDMI IN 3
8
1
4
AV IN 2
7
For 42PQ20R, 42/50PQ30R, 42/50PQ60R, 50/60PS80BR
6
B
AUDIO IN
(RGB/DVI)
2
12
R
OUT
IN1
3
1
HDMI
Digital Connection. Supports HD video and Digital
audio.
Accepts DVI video using an adapter or HDMI to
DVI cable (not included)
2
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
3
RGB (PC)
Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).
4
AV (Audio/Video) IN/OUT
Analog composite connection. Supports standard
definition video only (480i).
5
AUDIO IN (RGB/DVI)
1/8”(0.32cm) headphone jack for analog PC audio
input.
ANTENNA
IN
(
AUDIO
RGB(PC)
2
RS-232C IN
(CONTROL & SERVICE)
1
2
- AUDIO - (Mono)
1
VARIABLE AUDIO OUT
IN
VIDEO
AV
/DVI IN
)
5
VIDEO
4
COMPONENT IN
1
7
6
COMPONENT IN
Analog Connection. Supports SD/HD.
Uses a red, green, and blue cable for video & red
and white for audio.
7
ANTENNA IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
8
USB IN
Used for photo, music and movie.
USB IN SERVICE ONLY
(For 42/50PQ10R)
Used for software updates.
9
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 13
STAND INSTRUCTION
■
Image shown may differ from your TV.
Installation
(Except 60PS80)
Detachment
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
2
Loose the bolts from TV.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
3
Detach the stand from TV.
PREPARATION
1
! NOTE
PROTECTION COVER
FRONT
Except
50/60PS80BR
G
G
For
50/60PS80BR
After removing the stand, install the included
p r o t e c t i o n c o v e r over the hole for the stand.
Press the P R O T E C T I O N C O V E R into the TV
until you hear it click.
When assembling the stand, make sure to distinguish
and assemble the front and rear side of the stand
correctly.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the
product installation). If you tighten the bolt
with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
13
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 14
PREPARATION
CABLE ARRANGEMENT
■
Image shown may differ from your TV.
PREPARATION
After connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
50/60PS80BR
1
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE MANAGEMENT CLIP
CABLE HOLDER
How to remove the CABLE MANAGEMENT CLIP
G
Hold the CABLE MANAGEMENT CLIP with
both hands and pull it upward.
DESKTOP PEDESTAL INSTALLATION
■
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches
4 inches
4 inches
CAUTION
G
G
4 inches
Ensure adequate ventilation by following the clearance recommendations.
Do not mount near or above any type of heat source.
SWIVEL STAND
(This feature is not available for all models.)
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your
viewing position.
14
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 15
VESA WALL MOUNTING
A
PREPARATION
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact your nearest installer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
B
Product
PLASMA TV
Models
VESA
(A * B)
Standard Screw
Quantity
42/50PQ10R,
42PQ20R,
42/50PQ30R,
42/50PQ60R,
50PS80BR
400 * 400
M6
4
60PS80BR
600 * 400
Wall Mounting Bracket
(sold separately)
(AW-50PG60MS)
M8
4
(AW-60PG60MS)
! NOTE
G
G
G
G
G
Screw length needed depends on the wall mount
used. For further information, refer to the instructions included with the mount.
Standard dimensions for wall mount kits are shown
in the table.
When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
Do not use screws longer then the standard dimension, as they may cause damage to the inside to
the TV.
For wall mounts that do not comply with the VESA
G
G
standard screw specifications, the length of the
screws may differ depending on their specifications.
Do not use screws that do not comply with the
VESA standard screw specifications.
Do not fasten the screws too strongly. This may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.
LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installation instructions.
CAUTION
G
Do not install your Wall Mount Bracket while your TV is turned on. It may result in personal injury due to
electric shock.
15
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 16
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
PREPARATION
■
■
You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
■
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is
mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (sold separately) to tie the product. It is safer to tie
the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
16
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.
To use the TV safely, make sure that the height of the bracket on the wall and the one on the TV are
the same.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 17
■
To prevent damage do not connect to the power outlet until all connections are made between the devices.
ANTENNA OR CABLE CONNECTION
(
)
1. Antenna (Analog)
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
PREPARATION
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connection.
For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Copper Wire
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
(
)
Be careful not to bend the copper wire
when connecting the antenna.
■
2. Cable
ANTENNA
IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
17
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 18
EXTERNAL EQUIPMENT SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■
Image shown may differ from your TV.
HD RECEIVER SETUP
Component Connection
AUDIO
* C O M P O N E N T I N V I D E O/A
: For 42/50PQ10R
A U D I O 1,
* C O M P O N E N T I N V I D E O 1/A
C O M P O N E N T I N V I D E O 2/A
AUDIO 2
: Except 42/50PQ10R
PB
PR
L
VIDEO
COMPONENT IN
VARIABLE AUDIO OUT
2
2
1
RGB(PC)
Y
B
R
VIDEO
IN
2
N
VICE)
ANT
AV
1
IN
OUT
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O* or C O M P O N E N T I N
A U D I O 1* jacks on the TV.
AUDIO IN
(RGB/DVI)
- AUDIO - (Mono)
2
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O* or C O MP O N E N T I N V I D E O 1* jacks on the TV. Match the
jack colors (Y = green, PB = blue, and PR = red).
IN1
EXTERNAL EQUIPMENT SETUP
1
AUDIO
1. How to connect
R
2. How to use
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.
operation)
■
Select the C o m p o n e n t* or C o m p o n e n t 1*
input source on the TV using the I N P U T button
on the remote control.
If connected to C O M P O N E N T I N 2 input,
select the C o m p o n e n t 2 input source on the TV.
(Except 42/50PQ10R)
■
* C o m p o n e n t: For 42/50PQ10R
* C o m p o n e n t 1 : Except 42/50PQ10R
Supported Resolutions
Signal
18
Component
Y, CB/PB, CR/PR
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480i
15.73
15.75
59.94
60.00
720x480p
31.47
31.50
59.94
60.00
720x576i
15.62
50.00
720x576p
31.25
50.00
1280x720p
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.12
59.94
60.00
50.00
1920x1080p
56.25
67.43
67.50
50.00
59.94
60.00
HDMI
480i
Yes
No
480p
576i
576p
Yes
Yes
Yes
No
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
1080p
Yes
Yes
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 19
HDMI Connection
1. How to connect
IN
1
2
RS-232C IN
(CONTROL & SERVICE)
RGB(PC)
VIDEO
AV
/DVI IN
- AUDIO - (Mono)
2
Connect the digital set-top box to H D M I I N*, H D M I / D V I
I N 1*, H D M I I N 2* or H D M I I N 3* jack on the TV.
No separate audio connection is necessary.
HDMI supports both audio and video.
* H D M I I N: For 42/50PQ10R
* H D M I / D V I I N 1, H D M I I N 2: For 42PQ20R, 42/50PQ30R,
42/50PQ60R, 50/60PS80BR
* H D M I I N 3: For 42/50PQ60R, 50/60PS80BR
1
2. How to use
EXTERNAL EQUIPMENT SETUP
1
HDMI-DTV OUTPUT
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
■ Select the H D M I*, H D M I 1*, H D M I2* or H D M I 3* input
source on the TV using the INPUT button on the remote
control.
■
* H D M I: For 42/50PQ10R
* HDMI1, H D M I2: For 42PQ20R, 42/50PQ30R,
42/50PQ60R, 50/60PS80BR
* HDMI1, H D M I2, HDMI3: For 42/50PQ60R,
50/60PS80BR
! NOTE
G
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version
1.3, it can cause flickers or no screen display. In
this case use the latest cables that support
HDMI version 1.3.
G
HDMI mode supports PCM audio format only.
G
If the Audio setting is set to Dolby/DTS/Bitstream
in some DVDP/STB, make sure to change the setting to PCM.
HDMI-DTV
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
720x480p
31.47
31.50
59.94
60.00
720x576p
31.25
50.00
1280x720p
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.12
59.94
60.00
50.00
1920x1080p
67.43
67.50
56.25
27.00
33.75
59.94
60.00
50.00
24.00
30.00
19
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 20
EXTERNAL EQUIPMENT SETUP
DVI to HDMI Connection (Except 42/50PQ10R)
1. How to connect
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
■ Select the HDMI1 input source on the TV using the
I N P U T button on the remote control.
■
IN
2
1
RS-232C IN
(CONTROL & SERVICE)
RGB(PC)
1
2
! NOTE
20
G
A DVI to HDMI cable or adapter is required for this
connection. DVI doesn't support audio, so a separate
audio connection is necessary.
G
HDMI mode supports PCM audio format only.
G
If the Audio setting is set to Dolby/DTS/Bitstream in
some DVDP/STB, make sure to change the setting to
PCM.
VARIABLE AUDIO OUT
2. How to use
AV
/DVI IN
DVI-DTV OUTPUT
L
R
OUT
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
VIDEO
2
AUDIO IN
(RGB/DVI)
- AUDIO - (Mono)
Connect the DVI output of the digital set-top box to
the H D M I / D V I I N 1 jack on the TV.
IN1
EXTERNAL EQUIPMENT SETUP
1
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 21
DVD SETUP
Component Connection
B
AUDIO IN
(RGB/DVI)
VIDEO
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O* or C O M P O N E N T I N
V I D E O 1* jacks on the TV.
Match the jack colors (Y = green, PB = blue, and PR = red).
AV
R
VIDEO
Y
PB
PR
L
AUDIO
VARIABLE AUDIO OUT
2
2
RGB(PC)
OUT
1
VICE)
AUDIO
* C O M P O N E N T I N V I D E O/A
: For 42/50PQ10R
A U D I O 1,
* C O M P O N E N T I N V I D E O 1/A
C O M P O N E N T I N V I D E O 2/A
AUDIO 2
: Except 42/50PQ10R
- AUDIO - (Mono)
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O* or C O M P O N E N T I N A U D I O
1* jacks on the TV.
IN1
2
IN
1
IN
ANT
EXTERNAL EQUIPMENT SETUP
1
COMPONENT IN
1. How to connect
R
2. How to use
■
■
■
■
Turn on the DVD player, insert a DVD.
Select the C o m p o n e n t* or C o m p o n e n t 1* input source on
the TV using the I N P U T button on the remote control.
If connected to C O M P O N E N T I N 2 input, select the
C o m p o n e n t 2 input source on the TV. (Except 42/50PQ10R)
Refer to the DVD player's manual for operating instructions.
* C o m p o n e n t: For 42/50PQ10R
* C o m p o n e n t 1 : Except 42/50PQ10R
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
21
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 22
EXTERNAL EQUIPMENT SETUP
HDMI Connection
1. How to connect
2
A
/DVI IN
1
2
No separate audio connection is necessary.
HDMI supports both audio and video.
* H D M I I N: For 42/50PQ10R
* H D M I / D V I I N 1, H D M I I N 2: For 42PQ20R, 42/50PQ30R,
42/50PQ60R, 50/60PS80BR
* H D M I I N 3: For 42/50PQ60R, 50/60PS80BR
RS-232C IN
(CONTROL & SERVICE)
1
2. How to use
Select the H D M I*, HDMI1*, H D M I2* or HDMI3* input
source on the TV using the INPUT button on the remote
control.
■ Refer to the DVD player's manual for operating instructions.
■
* H D M I: For 42/50PQ10R
* HDMI1, H D M I2: For 42PQ20R, 42/50PQ30R,
42/50PQ60R, 50/60PS80BR
* HDMI1, H D M I2, HDMI3: For 42/50PQ60R,
50/60PS80BR
! NOTE
22
IN
G
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version
1.3, it can cause flickers or no screen display. In
this case use the latest cables that support
HDMI version 1.3.
G
HDMI mode supports PCM audio format only.
G
If the Audio setting is set to Dolby/DTS/Bitstream
in some DVDP/STB, make sure to change the setting to PCM.
VIDEO
Connect the HDMI output of the DVD to the H D M I I N*,
H D M I / D V I I N 1*, H D M I I N 2* or H D M I I N 3* jack
on the TV.
- AUDIO - (Mono)
EXTERNAL EQUIPMENT SETUP
1
HDMI-DVD OUTPUT
RGB(PC)
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 23
VCR SETUP
Antenna Connection
2
Connect the antenna cable to the RF
antenna in socket of the VCR.
ANTENNA
IN
2
Connect the RF antenna out socket of the
VCR to the A N T E N N A I N socket on the
TV.
1
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
2. How to use
VIDEO
L
R
Wall Jack
2
■
■
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Antenna
EXTERNAL EQUIPMENT SETUP
1
AUDIO
1. How to connect
Composite (RCA) Connection
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
L
R
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
ANTEN
IN
2
1
PC)
AUDIO
VARIABLE AUDIO OUT
R
VIDEO
AV
IN
- AUDIO - (Mono)
Select the A V* or A V 1* input source on the TV using the
I N P U T button on the remote control.
■ If connected to A V I N 2, select A V 2 input source on the TV.
(Except 42/50PQ10R)
* A V: For 42/50PQ10R
* A V 1 : Except 42/50PQ10R
■
B
AUDIO IN
(RGB/DVI)
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
IN1
■
VIDEO
1
2. How to use
OUT
1
COMPONENT IN
1. How to connect
! NOTE
G
If you have a mono VCR, connect the audio cable
from the VCR to the A U D I O - L ( M o n o ) jack of the
TV.
23
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 24
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
■
Image shown may differ from your TV.
Camcorder
1. How to connect
V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
L
■
■
Select the A V 2 input source on the TV using
the I N P U T button on the remote control.
(Except 42/50PQ10R)
If connected to A V I N* or A V I N 1* input,
select the A V* or A V 1* input source on the TV.
Operate the corresponding external equipment.
* A V I N: For 42/50PQ10R
* A V I N 1: Except 42/50PQ10R
* A V: For 42/50PQ10R
* A V 1: Except 42/50PQ10R
USB IN
2. How to use
■
24
VIDEO
1
VIDEO L/MONO AUDIO R
EXTERNAL EQUIPMENT SETUP
1
Video Game Set
AV IN 2
R
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 25
PC SETUP (Except 42/50PQ10R)
B
AUDIO IN
(RGB/DVI)
VGA (D-Sub 15 pin) Connection
VIDEO
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
R
2
1
AUDIO
VARIABLE AUDIO OUT
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
OUT
2
RGB(PC)
IN1
Connect the VGA output of the PC to the R G B( P C)
jack on the TV.
2
2. How to use
1
■
■
Turn on the TV and the PC.
Select the R G B input source on the TV using the I N P U T
button on the remote control.
Supported Display Specifications
(RGB-PC)
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x400
31.469
70.09
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.720
59.799
1280x1024
63.668
59.895
1920x1080
66.587
59.934
RGB OUTPUT
AUDIO
! NOTES
G
To get the the best picture quality, adjust the
PC graphics card to 1024x768(42PQ20R,
42PQ30R/60R), 1360x768(50PQ30R/60R),
1920x1080(50/60PS80BR).
G
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the
PC output to another resolution, change the
refresh rate to another rate or adjust the
brightness and contrast on the PICTURE menu
until the picture is clear.
G
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image could
become permanently imprinted on the screen.
G
The synchronization input form for Horizontal
and Vertical frequencies is separate.
G
Depending on the graphics card, some resolution settings may not allow the image to be
positioned on the screen properly.
* For FHD models
* Except 42PQ20R, 42PQ30R/60R
EXTERNAL EQUIPMENT SETUP
1
- AUDIO - (Mono)
2
VIDEO
AV
IN
1. How to connect
25
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 26
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode (Except 42/50PQ10R)
Selecting Resolution (For 50PQ30R/60R, 50/60PS80BR)
You can choose the resolution in RGB mode.
The P o s i t i o n, P h a s e, and S i z e can also be adjusted.
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
Move
E
• Contrast
70
• Brightness
40
• Sharpness
70
• Color
70
• Tint
0
Resolution
Auto config.
Position
R
• Advanced Control
• Picture Reset
Screen
G
Size
Phase
Reset
1 MENU
2
Select P I C T U R E.
ENTER
Select S c r e e n.
ENTER
Select R e s o l u t i o n.
3
4
ENTER
5
ENTER
26
Screen
Enter
Select the desired resolution.
G
1024 x 768
1280 x 768
1360 x 768
Prev.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 27
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Move
Screen
Enter
E
• Contrast
70
• Brightness
40
• Sharpness
70
• Color
70
• Tint
0
Move
Prev.
Resolution
Auto config. G
To Set
Position
R
• Advanced Control
• Picture Reset
Screen
G
Size
Yes
No
Phase
Reset
1 MENU
2
EXTERNAL EQUIPMENT SETUP
PICTURE
Select P I C T U R E.
ENTER
Select S c r e e n.
ENTER
Select A u t o c o n f i g ..
ENTER
Select Y e s.
3
• If the position of the image is still not
correct, try Auto adjustment again.
• If picture needs to be adjusted again
after Auto adjustment in RGB, you can
adjust the P o s i t i o n, S i z e or P h a s e.
4
5
ENTER
Start Auto Configuration.
27
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 28
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, and Phase
PICTURE
Move
Screen
Enter
Move
Prev.
E
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
Position: This feature operates only in Component(except 480i, 576i) and RGB mode.
Size, Phase: This feature operates only in RGB mode.
• Contrast
70
• Brightness
40
• Sharpness
70
• Color
70
• Tint
0
Resolution
Auto config.
D
R
Position
G
G
F
G
E
• Advanced Control
Size
• Picture Reset
Phase
Screen
Reset
1 MENU
Select P I C T U R E.
■
2
ENTER
Select S c r e e n.
■
3
ENTER
Select P o s i t i o n, S i z e, or P h a s e.
■
4
ENTER
5
ENTER
28
Make appropriate adjustments.
P o s i t i o n: This function is to adjust picture to left/right and up/down as you
prefer.
S i z e: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal
screen size will also change.
P h a s e : This function allows you to
remove any horizontal noise and clear or
sharpen the image of characters.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 29
Screen Reset (Reset to original factory values)
Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings.
This feature operates only in Component(except 480i, 576i) and RGB mode.
Move
Screen
Enter
Move
Prev.
E
• Contrast
70
• Brightness
40
• Sharpness
70
• Color
70
• Tint
0
• Advanced Control
Resolution
Auto config.
To Set
Position
R
G
Yes
Size
• Picture Reset
Screen
Phase
Reset
1 MENU
2
G
Select P I C T U R E.
ENTER
Select S c r e e n.
ENTER
Select R e s e t.
3
No
EXTERNAL EQUIPMENT SETUP
PICTURE
4
ENTER
Select Y e s.
5
ENTER
29
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 30
EXTERNAL EQUIPMENT SETUP
USB CONNECTION (Except 42/50PQ10R)
■
Image shown may differ from your TV.
i.e)
1
VIDEO L/MONO AUDIO R
USB IN
EXTERNAL EQUIPMENT SETUP
or
AV IN 2
1. How to connect
1
Connect the USB device to the U S B I N jack on the side
of TV.
2. How to use
■
After connecting the U S B I N jack, you use the USB func-
tion. (G p . 60)
30
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 31
VARIABLE OUT (Except 42/50PQ10R)
Send the TV’s audio to external audio equipment via the Audio Output port.
2
1
OUT
AUDIO
VARIABLE AUDIO OUT
- AUDIO - (Mono)
IN1
Set up your speakers through your analog stereo amplifier, according to the instructions provided with the
amplifier.
ANTENN
IN
1
! NOTE
L
G
G
R
AUDIO
When connecting with external audio equipments, such as
amplifiers or speakers, you can turn the TV speakers off in
the menu. (G p . 8 8)
Select V a r i a b l e O u t in Audio menu to connect the V A R IA B L E A U D I O O U T jacks. (G p . 8 9)
EXTERNAL EQUIPMENT SETUP
2
R
VIDEO
AV
Connect audio outputs to the TV’s VARIABLE AUDIO
O U T jacks.
1
COMP
V
1. How to connect
MONITOR OUT (Except 42/50PQ10R)
B
(RGB/DVI)
R
ANTENNA
IN
2
1
AUDIO
VARIABLE AUDIO OUT
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
OUT
VIDEO
2
IN1
Connect the second TV or monitor to the TV’s AV OUT
jacks.
- AUDIO - (Mono)
AV
1
COMPONE
1. How to connect
VIDEO
The TV has a special signal output capability which allows you to hook up the second TV or monitor.
1
! NOTE
G
Component, RGB, HDMI input sources cannot be used for
AV out.
G
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
L
R
31
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 32
WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
RATIO Changes the aspect ratio of the video.G p.72
Except 42/50PQ10R
RATIO POWER INPUT
ENERGY SAVING
SLEEP
Q. MENU MENU
INPUT Rotates through inputs.
Also switches the TV on from standby. G p.43
SLEEP Select the amount of time before your TV turns off automatically.G p.96
ENERGY SAVING Adjusts the Energy Saving. G p.78
WATCHING TV / CHANNEL CONTROL
POWER Turns the TV on from standby or off to standby.
Q.MENU Opens the list of Quick Menu options.G p.39
MENU Displays the main menu or clears all on-screen displays and
returns to TV viewing.
ENTER
RETURN
AV MODE
THUMBSTICK Navigates the on-screen menus and adjusts the system set(Up/Down/Left tings to your preference.
MARK
Right/ENTER)
FAV
CH
VOL
SIMPLINK See a list of AV devices connected to TV.
When you toggle this button, the SIMPLINK menu appears
at the screen. G p.50 - 51
P
A
G
E
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
X STUDIO Select the Photo/Music/Movie list.
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
AV MODE Toggles through preset Video and Audio modes. G p.48
VOLUME UP Adjusts the volume.
/DOWN
FAV Scroll through the programmed Favorite channels. G p.46
MARK Use to mark or unmark a photo/music/movie.
MUTE Switches the sound on or off. G p.35
CHANNEL Changes the channel.
UP/DOWN
FREEZE
PAGE Moves from one full set of screen information to the next one.
UP/DOWN
NUMBER button
LIST Displays the channel list. G p.45
Q.VIEW Tune to the last channel viewed.
USB, SIMPLINK
Control buttons
Controls the SIMPLINK compatible devices.
Controls the USB menu.
FREEZE Freezes the current frame.
The TV returns to normal viewing automatically if no signal
is received or no operation is performed for 5 minutes.
It doesn’t work at USB mode.
32
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 33
RATIO Changes the aspect ratio of the video.G p.72
For 42/50PQ10R
RATIO
INPUT Rotates through inputs.
Also switches the TV on from standby. G p.43
POWER
AV MODE Toggles through preset Video and Audio modes. G p.48
INPUT
POWER SAVING
AV MODE
POWER SAVING Adjusts the P o w e r S a v i n g. G p.78
1
2
POWER Turns the TV on from standby or off to standby.
3
5
6
7
8
9
LIST
0
Q.VIEW
LIST Displays the channel list. G p.45
Q.VIEW Tune to the last channel viewed.
VOLUME UP Adjusts the volume.
/DOWN
MUTE
CH
VOL
P
A
G
E
MUTE Switches the sound on or off. G p.35
CHANNEL Changes the channel.
UP/DOWN
PAGE Moves from one full set of screen information to the next one.
UP/DOWN
ENTER
THUMBSTICK Navigates the on-screen menus and adjusts the system set(Up/Down/Left tings to your preference.
Right/ENTER)
MENU
RETURN
WATCHING TV / CHANNEL CONTROL
4
NUMBER button
MENU Displays the main menu or clears all on-screen displays and
returns to TV viewing.
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
Q.MENU FREEZE SLEEP
FAV
Q.MENU Opens the list of Quick Menu options.G p.39
FREEZE Freezes the current frame.
The TV returns to normal viewing automatically if no signal
is received or no operation is performed for 5 minutes.
It doesn’t work at USB mode.
SLEEP Select the amount of time before your TV turns off automatically.G p.96
FAV Scroll through the programmed Favorite channels. G p.46
Installing Batteries
■
Open the battery compartment cover on the back side
and install the batteries matching correct polarity.
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones.
■
Close cover.
33
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 34
TURNING ON TV
Turning on TV just after installation
WATCHING TV / CHANNEL CONTROL
34
1
First, connect the power cord correctly.
At this moment, the TV is in standby mode.
■ In standby mode to turn TV on, press the I N P U T, C H (
E or D ) button on the TV or press the P O W E R,
I N P U T, C H (
9 ) button on the remote control.
or ) , N u m b e r ( 0~9
2
Select the viewing source by using the I N P U T button on the remote control.
■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
! NOTE
G
G
G
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
If you do not complete the Initial setting, it will appear whenever the TV is switched on
until the Initial setting procedure is completed.
If the TV is unplugged once or turn off with the
(power) button on the TV, reset the
C l o c k function. (some models)
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 35
CHANNEL SELECTION
1
Press the C H (
or
) or NUMBER buttons to select a channel number.
Adjust the volume to suit your personal preference.
1
Press the V O L ( + or - ) button to adjust the volume.
2
If you want to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the MUTE, V O L ( + or - ) or AV MODE button.
WATCHING TV / CHANNEL CONTROL
VOLUME ADJUSTMENT
35
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 36
WATCHING TV / CHANNEL CONTROL
INITIALIZING SETUP (MODE SETTING)
This Function guides the user to easily set the essential items for viewing the TV for the first time when
purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be
activated from the user menus.
H o m e U s e”. We recommend setting the TV to “H
H o m e U s e” mode for the best picDefault selection is “H
ture in your home environment.
■ “S
S t o r e D e m o” Mode is only intended for use in retail environments. Customers can adjust the “P
Picture
menu - P i c t u r e m o d e” manually while inspecting the TV, but the TV will automatically return to preset instore mode after 5 minutes.
■ “S
S t o r e D e m o” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV
to set the image quality.
■ You can also adjust M o d e S e t t i n g in the O P T I O N menu.
■ Factory defaults are set when you choose “H
H o m e U s e”.
■
WATCHING TV / CHANNEL CONTROL
Step1. Welcome
Step3. Mode Setting
Select Mode
WELCOME
Selecting the environment.
Choose the setting mode you want.
WELCOME!
Store Demo
Thank you for choosing LG
Home Use
Select [Home Use] to use this TV at Home. To
use this TV at store, select [Store Demo].
Next
Next
Previous
1
1
Select H o m e U s e Mode.
ENTER
2
ENTER
Step2. Selecting Language
Step4. Auto Tuning
Language
English
Auto Tuning
Español
Portugués
Before starting,
be sure that the
TV antenna is connected.
Previous
Previous
Next
1
ENTER
1
Select L a n g u a g e.
2
ENTER
36
Next
Start A u t o T u n i n g.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 37
ON-SCREEN MENUS SELECTION Except 50/60PS80BR
■
Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL
Move
PICTURE
Enter
Auto Tuning
Move
Aspect Ratio
Manual Tuning
Channel Edit
AUDIO
Enter
Move
: 16:9
Auto Volume
: Off
Energy Saving : Intelligent Sensor
Clear Voice ll
: Off
• Level
Power Saving
: Off
Picture Mode
: Standard
Balance
• Contrast
100
Sound Mode
70
-
+
0
L
R
: Standard
R
G
• Treble
50
• Bass
50
E
WATCHING TV / CHANNEL CONTROL
70
• Color
3
• SRS TruSurround XT : Off
• Brightness 50
• Sharpness
Enter
E
For 42/50PQ10R
TIME
Move
Enter
CHANNEL
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Move
Menu Language
Clock
: English
Enter
USB
Move
Enter
Photo List
Off Time
: Off
Input Label
On Time
: Off
SIMPLINK
: On
Movie List
Sleep Timer
: Off
Key Lock
: Off
DivX Reg. Code
Caption
: Off
Deactivation
Set ID
:1
Music List
ISM Method
: Normal
Demo Mode
: Off
E
1 MENU
2
ENTER
3
ENTER
4 MENU
Display each menu.
Select a menu item.
Accept the current selection.
Return to TV viewing.
37
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 38
WATCHING TV / CHANNEL CONTROL
For 50/60PS80BR
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL
Move
PICTURE
Enter
Auto Tuning
Aspect Ratio
Manual Tuning
AUDIO
Enter
: Off
Energy Saving : Intelligent Sensor
Clear Voice ll
: Off
: Standard
• Contrast
• Level
100
Balance
• Brightness 50
WATCHING TV / CHANNEL CONTROL
• Sharpness
70
• Color
70
• Tint
0
Sound Mode
OPTION
Move
Menu Language
R
G
: Off
: Off
Set ID
:1
ISM Method
: Normal
Demo Mode
: Off
+
L
R
• Treble
50
• Bass
50
Move
Enter
Move
Enter
Clock
CHANNEL
: On
Caption
-
0
: Standard
TIME
Enter
: English
Key Lock
3
E
Input Label
SIMPLINK
Enter
• SRS TruSurround XT : Off
E
OPTION
PICTURE
INPUT
AUDIO
TIME
BLUETOOTH
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
USB
E
INPUT
Move
Enter
3
ENTER
4 MENU
USB
Photo List
AV1
TV PIN
: 0000
Music List
AV2
Bluetooth Headset : Disconnected
Movie List
Component1
Registered Bluetooth Device
DivX Reg. Code
Component2
My Bluetooth Info.
Deactivation
E
ENTER
Enter
: Off
HDMI2
2
Move
BLUETOOTH
HDMI1
1 MENU
BLUETOOTH
TV
RGB
38
Move
Auto Volume
Picture Mode
Channel Edit
Move
: 16:9
Display each menu.
Select a menu item.
Accept the current selection.
Return to TV viewing.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 39
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
■
■
■
■
■
■
■
S l e e p T i m e r: Select the amount of time before
your TV turns off automatically.
D e l / A d d / F a v: Select channel you want to add/delete
or add the channel to the Favorite List.
U S B E j e c t: Select “Eject” in order to eject a USB
device.
Q.Menu
Aspect Ratio
16:9
Vivid
Sound Mode
Standard
Caption
Off
SAP
CH
F
Picture Mode
STEREO
Sleep Timer
Off
Del/Add/Fav
Delete
USB Eject
Eject
Close
G
WATCHING TV / CHANNEL CONTROL
■
A s p e c t R a t i o: Selects your desired picture format.
P i c t u r e M o d e: Selects the factory preset picture
depend on the viewing environment.
S o u n d M o d e: Selects the factory preset sound for
type of program.
C a p t i o n: Select on or off.
S A P: Selects MTS sound.
Except 42/50PQ10R
1Q. MENU
Display each menu.
2
Make appropriate adjustments.
3Q. MENU
Return to TV viewing.
39
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 40
WATCHING TV / CHANNEL CONTROL
CHANNEL SETUP
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the
channel list.
WATCHING TV / CHANNEL CONTROL
CHANNEL
Move
Enter
Auto Tuning
Manual Tuning
Manual Tuning
Channel Edit
Channel Edit
Move
Enter
Check your antenna
connection.
The previous channel
information will be updated
during Auto Tuning.
Start
Close
1 MENU
Select C H A N N E L.
2
ENTER
Select A u t o T u n i n g.
ENTER
Select S t a r t.
3
4
ENTER
Run A u t o T u n i n g.
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
40
CHANNEL
Auto Tuning
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 41
Add/Delete Channel (Manual Tuning)
CHANNEL
Move
Enter
CHANNEL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Channel Edit
Channel Edit
Move
Enter
F
TV
2
TV 2
Add
Close
Select C H A N N E L.
2
ENTER
Select M a n u a l T u n i n g.
ENTER
Select T V or C A T V.
WATCHING TV / CHANNEL CONTROL
Channel
1 MENU
G
Select channel type and
RF-channel number.
3
4
Select channel you want to add
or delete.
5
ENTER
Select A d d or D e l e t e.
6RETURN
Return to the previous menu.
MENU
Return to TV viewing.
41
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 42
WATCHING TV / CHANNEL CONTROL
Channel Editing
The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in blue.
When a channel number is deleted, it means that you will be unable to select it using CH or button during
TV viewing.
If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select
it in the Channel Edit menu.
WATCHING TV / CHANNEL CONTROL
CHANNEL
Move
Enter
4
Auto Tuning
6
9
Manual Tuning
11
13
Channel Edit
14
30
51
63
1 MENU
Select C H A N N E L.
ENTER
Select C h a n n e l E d i t.
ENTER
Select a channel.
3
4
Select channel you want to add or
delete.
5RETURN
MENU
42
CATV
2
Ch.Change
2
TV
2
Return to the previous menu.
Return to TV viewing.
Move
CH
Page Change
Previous
Add/Delete
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 43
INPUT LIST
TV
AV1
AV2
Component1
Component2
INPUT
42/50PQ10R
42PQ20R,
42/50PQ30R
42/50PQ60R,
50/60PS80BR
ENTER
Select the desired input source.
TV
AV
HDMI
Component
TV
AV1
AV2
Component1
HDMI2
HDMI1
RGB
Component2
TV
HDMI3
WATCHING TV / CHANNEL CONTROL
1
AV2
AV1
Component1
HDMI1
HDMI2
■
■
■
■
■
Component2
RGB
T V: Select it to watch over-the-air and
cable broadcasts.
A V: Select them to watch a VCR or other
external equipment.
C o m p o n e n t: Select them to watch DVD
or a Digital set-top box.
R G B: Select it to view PC input.
H D M I: Select them to watch high definition devices.
43
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 44
WATCHING TV / CHANNEL CONTROL
INPUT LABEL
You can set a label for each input source when it's not in use.
OPTION
Move
Menu Language
Enter
: English
Input Label
Move
Menu Language
Enter
: English
Input Label
WATCHING TV / CHANNEL CONTROL
SIMPLINK
: On
SIMPLINK
: Off
Key Lock
: Off
Key Lock
Caption
: Off
Caption
Set ID
:1
Set ID
ISM Method
: Normal
ISM Method
: Off
AV
: Off
Component
:1
:HDMI
Normal
: Off
Demo Mode
Demo Mode
E
: Off
F
G
Close
E
42/50PQ10R
AV1
F
2
ENTER
Select I n p u t L a b e l.
ENTER
Select the source.
3
4
Select the label.
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
F
AV2
Component1
Component1
Component2
Component2
RGB
RGB
HDMI1
HDMI1
HDMI2
HDMI2
HDMI3
Close
Select O P T I O N.
AV1
G
AV2
42PQ20R,
42/50PQ30R
1 MENU
44
OPTION
Close
42/50PQ60R,
50/60PS80BR
G
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 45
CHANNEL LIST
You can check channels which are stored in the memory by displaying the channel list.
Channel List
TV2
TV5
TV6
■
Displaying channel list
1
LIST
■
Selecting a channel in the channel list
1
Select a channel.
2
ENTER
■
Display the C h a n n e l L i s t.
WATCHING TV / CHANNEL CONTROL
Exit
Switch to the chosen channel number.
Paging through a channel list
1
CH
P
A
G
E
Turn the pages.
2
LIST
Return to TV viewing.
45
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 46
WATCHING TV / CHANNEL CONTROL
FAVORITE CHANNEL SETUP
Favorite Channels are a convenient feature that lets you quickly select channels to channels of your choice without
waiting for the TV to select through all the in-between channels.
To tune to a favorite channel, press the F A V (favorite) button repeatedly.
Q.Menu
WATCHING TV / CHANNEL CONTROL
16:9
Picture Mode
Vivid
Sound Mode
Standard
Caption
Off
SAP
STEREO
Sleep Timer
CH
Del/Add/Fav
Off
F
USB Eject
1
CH
P
A
G
E
or
1
2
3
4
5
6
7
8
9
Select your desired channel.
0
3
4Q. MENU
Select D e l / A d d / F a v.
Select F a v o r i t e.
Return to TV viewing.
Favorite
Eject
Close
2Q. MENU
46
Aspect Ratio
G
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 47
FAVORITE CHANNEL LIST
Favorite List
TV2
TV5
TV6
■
Displaying the favorite channel list
1 MARK
FAV
■
Selecting a channel in the favorite channel list
1
Select a channel.
2
ENTER
■
Display the Favorite Channel List.
WATCHING TV / CHANNEL CONTROL
Exit
Switch to the chosen channel number.
Paging through a favorite channel list
1
CH
P
A
G
E
2RETURN
Turn the pages.
Return to TV viewing.
47
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 48
WATCHING TV / CHANNEL CONTROL
AV MODE
AV Mode toggles through preset Video and Audio settings.
Off
Cinema
Sport
Game
WATCHING TV / CHANNEL CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
Off
Cinema
Game
Sport
Press the A V M O D E button repeatedly to select the desired source.
2RETURN
Return to TV viewing.
■
■
48
C i n e m a” in AV mode,
If you select “C
C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO
menu - Sound Mode” respectively.
O f f” in AV mode, the
If you select “O
P i c t u r e M o d e” and “S
S o u n d M o d e”
“P
return to previous selected value.
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 49
KEY LOCK
The TV can be set up so that it can only be used with the remote control.
This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Move
: English
Input Label
Enter
OPTION
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Off
Caption
: Off
Caption
: Off
On
Set ID
:1
Set ID
:1
: Normal
ISM Method
: Off
Demo Mode
ISM Method
Demo Mode
: Normal
: Off
E
E
1 MENU
Move
Menu Language
Select O P T I O N.
2
ENTER
Select Key Lock.
■
3
ENTER
WATCHING TV / CHANNEL CONTROL
Menu Language
Select O n or O f f.
4RETURN
■
Return to the previous menu.
MENU
Return to TV viewing.
O n’, if the TV is turned
In K e y L o c k ‘O
off, to turn on the TV, press the INPUT,
CH D E button on the TV or POWER,
INPUT, CH
or NUMBER buttons
on the remote control.
With the K e y L o c k O n, the display
‘ X K e y L o c k’ appears on the screen if
any button on the front panel is pressed
while viewing the TV (Except
(power)
botton).
49
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 50
WATCHING TV / CHANNEL CONTROL
Except 42/50PQ10R
Simplink allows you to control and play other AV devices connected with HDMI cable without additional cables
and settings. This TV may work with devices with HDMI-CEC support, but only devices with the
logo
are fully supported.
SIMPLINK can be turned on and off in the user menus.
WATCHING TV / CHANNEL CONTROL
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Off
Key Lock
: Off
Key Lock
: Off
On
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Off
Demo Mode
Demo Mode
E
: Normal
: Off
E
1 MENU
Select O P T I O N.
2
ENTER
Select S I M P L I N K.
ENTER
Select O n or O f f.
3
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.
G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will
stop.
G When you select a device with home theater functionality, the sound output automatically switches to the
home theater speakers and the TV speakers are turned off.
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker
to operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is
set to the TV volume.
G
50
MFL58486302-Edit1-en 9/2/09 11:44 AM Page 51
SIMPLINK Functions
D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV.
■ D i s c p l a y b a c k : Control connected AV devices by pressing the
, ENTER, G, A, l l, FF and GG buttons.
■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
■ S w i t c h a u d i o - o u t : Offers an easy way to switch audio-out.
■ S y n c P o w e r o n : When you play the connected AV device, TV will automatically turn on.
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide
this function)
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer
Electronics Control).
■
Display S I M P L I N K menu.
2
ENTER
Select the desired device.
WATCHING TV / CHANNEL CONTROL
1
3
ENTER
Control connected AV devices.
SIMPLINK Menu
1
2
3
4
5
T V v i e w i n g: Switch to the previous TV
channel regardless of the current mode.
D I S C p l a y b a c k: Select and play discs.
When multiple discs are available, the titles
of discs are conveniently displayed at the
bottom of the screen.
V C R p l a y b a c k: Control the connected
VCR.
H D D R e c o r d i n g s p l a y b a c k: Control
recordings stored in HDD.
A u d i o O u t t o H o m e T h e a t e r s p e a ke r / A u d i o O u t t o T V: Select Home
Theater speaker or TV speaker for Audio
Out.
1
2
G
3
4
5
G
G
When no device is connected
(displayed in gray)
Selected Device
When a device is connected
(displayed in bright color)
51
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 52
BLUETOOTH For 50/60PS80BR
Bluetooth?
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange.
With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset or receive
images(only JPG), listen to music from the Bluetooth enabled cell phone using this TV.
A
Communication Spec.: Bluetooth Specification version 2.0 + E D R ( E n h a n c e d D a t a R a t e )
A
Output: Bluetooth Specification Power Class 2
A
Maximum Communication Range: Line of open sight approx. 10 m (30 ft)
A
Frequency Band: 2.4 GHz band (2.4 GHz ~ 2.4835 GHz)
A
Bluetooth Module: RBFS-C921A
BLUETOOTH
A
Compatible Bluetooth Profile: A2DP (Advanced Audio Distribution Profile)
OPP (Object Push Profile)
GAVDP (Generic Audio/Video Distribution Profile)
HSP (Headset Profile)
0700
FCC ID: BEJRBFS-C921A
Precautions when using the Bluetooth
Use within 10m(-45° ~ 45°) range.
If you use the device out of the range or within the range with obstacles, it can result in communication
error.
G Communication error can occur depending on the surrounding devices.
G Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth.
G The device search time differs depending on the number of Bluetooth devices and the operating situation.
G The probability of search increases with less number of devices.
G Electromagnetic wave can be interfered with applicable wireless devices.
G Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot
provide services related to human life.
G You can only connect one Bluetooth device at a time.
G You cannot receive the photos(only JPG) or listen to music from other Bluetooth devices while using the
Bluetooth headset.
G For details of Bluetooth, refer to the user manual of the Bluetooth device.
G USB (Photo List, Music List, Movie List) and Bluetooth will not be supported at the same time.
G Operation is subject to the following two conditions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation (of the device).
G
QDID(Qualified Design Identity): B015112
52
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 53
SETTING THE BLUETOOTH
The Bluetooth feature on this TV allows you to listen to the wireless audio using Bluetooth headphones. It will
also connect with a Bluetooth equipped device to view phones.
BLUETOOTH
Move
BLUETOOTH
Enter
Bluetooth
: Off
Bluetooth
Bluetooth
TV PIN
: 0000
TV PIN
Move
Enter
:Off
: Off
Off
On
:On
0000
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered Bluetooth Device
My Bluetooth Info.
My Bluetooth Info.
BLUETOOTH
1 MENU
Select B L U E T O O T H.
2
ENTER
Select B L U E T O O T H.
ENTER
Select O n or O f f.
3
4
ENTER
Start Bluetooth.
!
Turning on bluetooth...
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
! NOTE
G
With Bluetooth set to ‘On’, if any registered devices are turned on, the TV will switch to Bluetooth mode
automatically even though you are watching in another input mode. In this case, set Bluetooth to Off.
53
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 54
BLUETOOTH
SET TV PIN
To accept a connection from an external Bluetooth device or to connect to an external Bluetooth device.
For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable
device.
The TV PIN must have more than 1 digit.
BLUETOOTH
Move
Enter
BLUETOOTH
Move
Bluetooth
: On
Bluetooth
: On
TVPIN
PIN
TV
0000
::0000
TVPIN
PIN
TV
0000
:: 0000
Enter
Set TV PIN
Registered Bluetooth Device
Registered Bluetooth Device
My Bluetooth Info.
My Bluetooth Info.
E
BLUETOOTH
Bluetooth Headset : Disconnected
0 0 0 0_
Bluetooth Headset : Disconnected
Delete
Enter
1 MENU
Select B L U E T O O T H.
2
■
ENTER
3
ENTER
Select T V P I N.
1
2
4
5
6
7
8
9
0
3
ENTER
Select the desired PIN number.
PIN number can support up to maximum of 10 digits.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
54
Press the
by one.
button to delete digits one
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 55
BLUETOOTH HEADSET
When you select the Bluetooth headset, you can listen to the TV audio in the Bluetooth headset through wireless communication.
You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device.
Maximum of 12 lists can be used.
When the unit is searching for the Bluetooth headset, other buttons except for the “Enter” button do not work.
Connecting a new Bluetooth headset
You can only search for the new Bluetooth headset only when no headset is already connected.
When you run the search, it will show the list of all Bluetooth headsets responding.
After a new Bluetooth device is searched, the PIN number is validated to connect the device. For details, refer to
the user manual of the applicable device.
4
ENTER
Select B L U E T O O T H.
5
2
ENTER
Select B l u e t o o t h H e a d s e t.
BLUETOOTH
1 MENU
1
2
3
4
5
6
7
8
9
Set the PIN number .
ENTER
Set Headset PIN
0
0000_
E
3
ENTER
Delete
Enter
Search the Bluetooth headset.
■
Connect the Bluetooth headset.
If you want to stop, press
the E N T E R button.
Headset is connected.
i
TV speaker will be turned off.
Connecting the Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top.
When connecting the Bluetooth device already registered, you can select and connect directly without any PIN validation.
1 MENU
4
Select B L U E T O O T H.
ENTER
2
Select Y e s.
?
ENTER
Do you want to connect your headset?
Select B l u e t o o t h H e a d s e t.
Yes
3
ENTER
Select the Bluetooth headset in
the list.
No
5
ENTER
Connect the Bluetooth headset.
After connecting/using the Bluetooth headset, the headset setting will be the D i s c o n n e c t e d condition automatically
when you turn off the power of the TV and then turn on.
G After connecting the Bluetooth headset, the TV speaker is switched to M u t e condition and the sound will only be
generated from the headset.
G
55
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 56
BLUETOOTH
Disconnecting the Bluetooth headset
1 MENU
Select B L U E T O O T H.
2
ENTER
3
Select B l u e t o o t h H e a d s e t.
ENTER
ENTER
Disconnect the Bluetooth headset.
BLUETOOTH
When requesting to connect to TV from the Bluetooth headset
Even if it is not in the registered device list, depending on a headset, it works if connected as shown below
when headset power off.
When the Bluetooth menu is "On" and there is a connection request from
the headset, this message is dispalyed.
Not all headsets support this feature.(Refer to the user manual of the
applicable Bluetooth headset.)
?
Do you want to use your headset?
Yes
No
1
ENTER
Select Y e s or N o.
! NOTE
LG recommends the following headset models.
- Only Stereo : Sony Ericsson: HBH-DS980,
Motorola: S9, Motorola: S605, Jabra: BT620S
There might be an audio delay, depending on the buffer
memory size of the headset.
G The stereo/mono headsets officially certified to be
Bluetooth compatible can be searched and connected.
G The stereo/mono headsets that support A2DP or HSP
functionality can be connected.
G If the surrounding environment of the TV is as follows, the device may not be searched or connected
properly.
-If there is strong electromagnetic interference.
-If there are many Bluetooth devices in the area.
-If the headset is turned off, not in place or has an
error.
-Because products such as microwave oven, wireless
LAN, plasma light, gas range etc., use the same frequency range, they can cause communication errors.
G Only one Bluetooth device can be connected at a
G
56
time.
G Connection that is lost due to the TV being turned
off etc. will not be automatically recovered. Try connecting the applicable device again.
G Some operations can be slower while operating the
headset.
G Even if you choose simplink Home Theater after using
the headset during Simplink operation, the unit will
not automatically switch to Home Theater speakers.
G When the headset connection continuously fails, pair
the device one more time.
G The audio quality of mono headsets will not
be as good as that for stereo headsets.
G Mono headsets may suffer from noise as the distance from the TV increases, because they use a
different transmission method compared with
stereo headsets.
G When a Bluetooth headset is in use, the
Volume +/- and Mute keys do not work, and
the Audio menu returns to the default value
and is disabled.
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 57
MANAGING REGISTERED BLUETOOTH DEVICE
If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used.
An additional device after registration of 12 devices deletes the existing list as stored order.
Bluetooth device names may be up to 14 characters long, the name will be truncated if more characters are used.
Move
Bluetooth
: On
TV PIN
: 0000
Enter
Bluetooth Headset : Disconnected
RegisteredBluetooth
BluetoothDevice
Device
Registered
My Bluetooth Info.
BLUETOOTH
Move
Enter
Bluetooth
: On
Registered
TV PIN
: 0000 Bluetooth Device
00:0d:44:84:14:62
Bluetooth Headset : Disconnected
E
BLUETOOTH
RegisteredBluetooth
BluetoothDevice
Device
Registered
FreePulse_Wireless
My Bluetooth Info.
LG L600V
E
E
1 MENU
Select B L U E T O O T H.
Delete
BLUETOOTH
Connect
2
ENTER
Select R e g i s t e r e d B l u e t o o t h D e v i c e.
3
ENTER
Check the registered Bluetooth device.
Connecting the registered Bluetooth device
1
Select the registered Bluetooth device you want.
2
Connect the bluetooth device.
3
ENTER
Select Y e s.
Deleting the registered Bluetooth device
A
Disconnecting the registered Bluetooth device
1
Select the connected Bluetooth device.
Registered Bluetooth Device
00:0e:b2:27:1e:d8
FreePulse_Wireless
2
Disconnect the bluetooth device.
Disconnect
A
Deleting the registered Bluetooth device
3
RED
ENTER
Select Y e s.
57
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 58
BLUETOOTH
MY BLUETOOTH INFORMATION
This function provides the My Bluetooth Information to the user.
"Edit" will be available when TV is not connected with any device.
BLUETOOTH
Move
Enter
BLUETOOTH
Move
Bluetooth
: On
Bluetooth
: On
TV PIN
: 0000
TV PIN
: 0000
Enter
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered BluetoothMy
Device
Device Name
My
MyBluetooth
BluetoothInfo.
Info.
My
MyBluetooth
BluetoothInfo.
Info.
5 0 P S 8 0 B R - M A
My Device Address
BLUETOOTH
0 0 : 0 5 : c 9 : f f : 0 0 f : 0 7
Edit
1 MENU
Select B L U E T O O T H.
2
ENTER
Select M y B l u e t o o t h I n f o ..
3
Edit the information.
ENTER
4
ENTER
Save.
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
58
Enter
MFL58486302-Edit2-en-blue 9/2/09 11:46 AM Page 59
VIEWING THE PHOTOS WITH BLUETOOTH DEVICE
You can view the photos(* . J P G) that were received from an external Bluetooth device to the TV.
To see the detailed informations about connecting the external Bluetooth device, refer to the user manual of the
applicable device.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Receiving
file(s)
( R o t a t e ): Rotate photos.
Every time you press E N T E R button on
(Rotate), rotates the photo 90° clockwise.
G C l o s e : Close the pop-up menu.
■ When you press the ENTER button, it will appear
again.
G
■
1/3
G
E
Close
■
ENTER
Select the each menu.
Use
button to select the previous or
next photo.
■ Use
button to select and control
the menu on the screen.
BLUETOOTH
1
F
! NOTE
When you send photos via Bluetooth, the memory capacity supports up to 4MB and 64 photos.
G You cannot receive the photos(only JPG) while using the Bluetooth headset or listening to music from
Bluetooth device.
G On receiving the photos, press the R E T U R N button to stop. At this time, all photos received will be
deleted.
G Some Bluetooth devices may not support sending the photos.
G
LISTENING THE MUSICS WITH BLUETOOTH DEVICE
A 2 D P) that were received from an external Bluetooth device to the TV.
You can listen to the musics(A
To see the detailed informations about connecting the external Bluetooth device, refer to the user manual of the
applicable device.
1
VOL
2
ENTER
Adjust the volume.
■ If you want to switch the sound off, press the M U T E button.
Return to TV viewing.
! NOTE
G
G
G
You cannot listen to the musics while using the Bluetooth headset or receiving the photos.
Some Bluetooth devices may not support listening the music via TV speaker system.
When listening to music with Bluetooth, variable/monitor out which is an audio out of TV does not work.
59
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 60
USB Except 42/50PQ10R
■
Image shown may differ from your TV.
ENTRY MODES
When you connect a USB device, this pop up menu is displayed automatically.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the U S B
I N jacks
2
Select P h o t o L i s t , M u s i c L i s t or M o v i e L i s t.
PHOTO LIST
or
3
MUSIC LIST
MOVIE LIST
ENTER
R
USB IN
on the side of TV.
■
This TV supports JPG, MP3 files and SD DivX.
! NOTE
G
When removing the USB device
Select the U S B E j e c t menu before removing
the USB device.
USB
1Q. MENU
In order to avoid losing the USB memory stick, use the
USB connector(sold separately) to fix the USB memory
stick to the USB connector holder of the TV.
USB connector holder
Select U S B E j e c t.
USB Input
Port
2
ENTER
Select E j e c t.
USB Connector (sold separately)
- Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder.
Precautions when using the USB device
G
G
G
G
G
G
G
G
G
G
60
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub,
the device is not recognizable.
A USB storage device using an automatic recognition program may not be recognized.
A USB storage device which uses its own driver may not
be recognized.
In case of a card reader, up to four memory cards are concurrently recognizable.
The recognition speed of a USB storage device may
depend on each device.
Please do not turn off the TV or unplug the USB device
when the connected USB storage device is working.
When such device is suddenly separated or unplugged,
the stored files or the USB storage device may be damaged.
Please do not connect the USB storage device which was
artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music, image or movie files.
Please connect power to a USB storage device which (over
0.5A) requires an external power supply. If not, the device
may not be recognized.
Please connect a USB storage device with cable is offered
by USB maker. If connected with cable is not offered by
USB maker or an excessively long cable, the device may
not be recognized.
G
G
G
G
G
G
G
G
G
G
G
Some USB storage devices may not be supported or
operate properly.
Please backup important files because data on the
USB device may be damaged. Data management is
the consumer's responsibility and as a result, the
manufacturer does not cover data damage.
Maximum of 999 files and folders can be recognized.
Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with
the Windows operating system. In case of a storage
device formatted as a different utility programme which
is not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the
NTFS file system.
Data in a USB storage device cannot be aligned.
The TV will display up to 128 characters of a file name.
If the USB is connected in Standby Mode, specific hard
disk will automatically be loaded when the TV is turned on.
The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
Any device with more than the recommended capacity
may not work properly.
If a USB external hard disk with a "Energy Saving" function
does not work, turn the hard disk off and on again to make
it work properly.
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 61
PHOTO LIST
You can view .JPG files from USB storage devices.
The On Screen Display on your model may be slightly different.
Supported photo file: *.JPG
Baseline: 64 x 64 ~ 15360 x 8640 (progressive spec out)
■
■
■
You can play JPG files only.
Only baseline scan is supported among JPG. (SOF0, SOF1 only)
Non-supported files are displayed in the form of bitmap.
USB
Screen Components
1 MENU
2
ENTER
Select U S B.
ENTER
2
1
Moves to upper level folder
2
Current page/Total pages
3
4
Select P h o t o L i s t.
3
PHOTO LIST
Page 1/1
Total number of marked photos
Drive 1
No Marked
0000.JPG
11/03/2008
0001.JPG
11/03/2008
0002.JPG
11/03/2008
0003.JPG
11/03/2008
0004.JPG
11/03/2008
0005.JPG
11/03/2008
0006.JPG
11/03/2008
Up Folder
0001.JPG
Corresponding buttons on
the remote control
640x480, 252KB
1
Up Folder
Move
Option
CH
Page Change
MARK Mark
Exit
4
61
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 62
USB
Photo Selection and Popup Menu
PHOTO LIST
Drive 1
No Marked
Page 1/1
Up Folder
0001.JPG
0000.JPG
11/03/2008
0001.JPG
11/03/2008
0002.JPG
11/03/2008
0003.JPG
11/03/2008
0004.JPG
11/03/2008
0005.JPG
11/03/2008
0006.JPG
11/03/2008
640x480, 252KB
Up Folder
Move
Option
Page Change
Page 1/1
No Marked
MARK Mark
Exit
USB
CH
PHOTO LIST
Drive 1
Up Folder
0001.JPG
0000.JPG
0001.JPG
11/03/2008
0003.JPG
11/03/2008
0005.JPG
11/03/2008
11/03/2008
11/03/2008
0002.JPG
640x480, 252KB
11/03/2008
View
Mark All
Delete
640x480, 252KB
Close
Up Folder
Move
1
Option
CH
Page Change
MARK Mark
Exit
When you select a file(not folder), this PopUp menu
is displayed.
G V i e w: Display the selected item.
G Mark All: Mark all photos on the screen.
G U n m a r k A l l: Deselect all marked photos.
G D e l e t e: Delete the selected photo item.
G C l o s e: Close the pop-up menu.
Select the target folder or drive.
■
2
3
ENTER
4
5RETURN
62
Select the desired photos.
ENTER
Show the Popup menu.
ENTER
Select the desired Popup menu.
Return to the previous menu.
Use the C H
button to navigate in the
photo page.
■ Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 63
Full Screen Menu
You can change the Photo List view so that it fills the screen. More operations are available in full
screen mode.
PHOTO LIST
Drive 1
Page 1/1
No Marked
Up Folder
0001.JPG
0000.JPG
11/03/2008
0001.JPG
11/03/2008
0002.JPG
11/03/2008
0003.JPG
11/03/2008
0004.JPG
11/03/2008
0005.JPG
11/03/2008
0006.JPG
11/03/2008
640x480, 252KB
Up Folder
Move
Option
Page Change
Page 1/1
No Marked
MARK Mark
Exit
USB
CH
PHOTO LIST
Drive 1
Up Folder
0001.JPG
0000.JPG
0001.JPG
11/03/2008
0003.JPG
11/03/2008
0005.JPG
11/03/2008
11/03/2008
11/03/2008
0002.JPG
640x480, 252KB
View
11/03/2008
Mark All
Delete
640x480, 252KB
Close
Up Folder
Move
Option
1/17
CH
Page Change
MARK Mark
Slideshow
Exit
BGM
Delete
Option
Hide
The aspect ratio of a photo may change the size of the photo displayed
on the screen in full size.
1
2
3
Select the target folder or drive.
■
ENTER
ENTER
4
5
Select the desired photos.
Use the C H
photo page.
button to navigate in the
Show the Popup menu.
Select V i e w.
ENTER
The selected photo is displayed in
full size.
63
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 64
USB
6
ENTER
Select the Slideshow, B G M,
D e l e t e, Option, or Hide.
(Rotate),
■
1/17
Slideshow
BGM
Delete
Option
Hide
Use
button to select the previous or
next photo.
■ Use
button to select and control
the menu on the full-sized screen.
USB
S l i d e s h o w: Selected photos are displayed during the
slide show. If no photo is selected, all photos in the current folder are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G B G M: Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n.
( R o t a t e ): Rotate photos.
G
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
G D e l e t e: Delete photos.
G O p t i o n: Set values for S l i d e S p e e d and M u s i c
A l b u m.
■ Use
button and E N T E R button to set values. Then go to
and press E N T E R to save the
settings.
■ You cannot change M u s i c A l b u m while BGM is
playing.
G H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press
E N T E R button to display.
G
Press F G to set the time interval between slides.
Slide Speed
Music Album
Enter
...
Cancel
! NOTE
G
64
Fast
This TV will not be able to decode
most JPG images saved using the
Progressive option.
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 65
MUSIC LIST
You can use the Music List menu to play MP3 files from a USB storage device.
This TV cannot play back copy-protected files.
The On Screen Display on your model may be slightly different.
Supported music file: *.MP3
Bit rate range 32 kbps ~ 320 kbps
• Sampling rate
MPEG1 layer 3: 32 KHz ~ 48 KHz
USB
Screen Components
1 MENU
2
ENTER
Select U S B.
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
3
MUSIC LIST
No Marked
Page 1/1
Title
Drive 1
Arirang
4
Select M u s i c L i s t.
ENTER
Duration
Up Folder
Corresponding buttons on
the remote control
Arirang
04:12
Good Bye
05:30
3945 KB, 128 Kbps
1
Up Folder
Move
Option
CH
Page Change
MARK Mark
Exit
4
65
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 66
USB
Music Selection and Popup Menu
Up to 6 music titles are listed per page.
MUSIC LIST
Page 1/1
No Marked
Drive 1
Title
Arirang
P l a y (During stop): Play the selected music.
Once a music finishes playing, the next selected
one will be played. When there are no selected
musics to play, the next one in the current folder will be played.
G P l a y M a r k e d: Play the selected musics. Once
a music finishes playing, the next selected one
will be played automatically.
G S t o p P l a y (During playback): Stop the playing musics.
G P l a y w i t h P h o t o: Start playing the selected
musics and then move to the Photo List.
G M a r k A l l: Mark all musics in the folder.
G U n m a r k A l l: Deselect all marked musics.
G D e l e t e: Delete the selected music.
G C l o s e: Close the pop-up menu.
G
Duration
Up Folder
Arirang
04:12
Good Bye
05:30
3945 KB, 128 Kbps
Up Folder
Move
Option
MUSIC LIST
CH
Page 1/1
Page Change
MARK Mark
No Marked
Drive 1
Title
Arirang
Exit
Duration
Up Folder
Arirang
3945 KB, 128 Kbps
Play
Good Bye
USB
Play with Photo
Mark All
3945 KB, 128 Kbps
Delete
Up Folder
Move
1
Close
Option
CH
Page Change
MARK Mark
Exit
■
Use the C H
button to navigate in the
music page.
■ Use the M A R K button to mark or unmark a
music file. If no music is marked, all the music
in the folder will be played in sequence. When
one or more music files are marked, the
marked music files will be played in sequence.
If you want to listen to only one song repeatedly, just mark that one file and play.
Select the target folder or drive.
2
Select the desired musics.
ENTER
3
ENTER
4
Show the Popup menu.
ENTER
5 RETURN
Select the desired Popup menu.
■
Return to the previous menu.
The play information box (as shown below) will automatically move across the screen when there is no user
input to prevent a fixed image remaining on the screen
for a extended period of time.
! NOTE
G
G
G
G
G
66
When music is playing,
is displayed in front of the music play time.
A damaged or corrupted music file that does not play displays 00:00 as the play time.
A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
Press E N T E R, A or R E T U R N button to stop the screen saver.
This TV can not play music files less than 32 Kbytes.
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 67
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1 , MPEG2, MPEG4(Doesn’t support Microsoft MPEG4 V2, V3), DivX 3.xx , DivX 4.xx,
DivX 5.xx , DivX 6.xx (Playback), DivX VOD ( DRM ) , XviD
Audio format : Mpeg, Mp3, PCM, Dolby D
Sampling frequency : within 32 KHz ~ 48 KHz(MP3)
Bit rate : within 32 kbps ~ 320 kbps(MP3)
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
mpg, mpeg, mpe, vob, dat
Avi, divx, m4v
Video Codec
Audio Codec
MPEG1, MPEG2
AC3, MPEG, MP3, PCM
MPEG4-SP, MPEG4-ASP, DivX 3.xx, DivX AC3, MPEG, MP3, PCM
4.xx, DivX 5.xx, DivX 6.xx(Playback), Xvid
Resolution
USB
Extension name
720x576@25p
720x480@30p
Precautions when playing the movie
G
G
G
G
G
G
G
G
G
Some user-created subtitles may not work properly.
Some special characters are not supported in subtitles.
HTML tags are not supported in subtitles.
Subtitles in languages other than the supported
languages are not available.
Time information in an external subtitle file should
be arranged in ascending order to be played.
The video file and the subtitle file must be located in the same folder.
The name of the video file and the subtitle file
must be the same to view the subtitles normally.
Some of subtitle files that are not ordered in
sequence may not be display.
DivX may not be played depending on its types
or recording methods.
G
G
G
G
G
G
G
The video file encoded by the GMC (Global
Motion Compensation) is not supported.
If the video and audio structure of recorded file
is not interleaved, either video or audio is outputted.
Max bitrate of playable movie file is 4 Mbps.
Maximum FPS (Frame Per Second) can be reached
only at SD level. FPS is 25 FPS (720*576) or 30
FPS (720*480) depending on Resolution.
Files of 25 FPS or 30 FPS of higher may not be
played properly.
Playing a video via a USB connection that does
not support high speed may not work properly.
USB storage devices below USB 2.0 are supported
as well. But they may not work properly in the
movie list.
67
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 68
USB
Screen Components
1 MENU
2
ENTER
Select U S B.
ENTER
2
MOVIE LIST
Select M o v i e L i s t.
3
Page 1/1
No Marked
Title
Drive 1
Z.Knight.Rider
Duration
1
Moves to upper level folder
2
Current page/Total pages
Z.Knight.Rider
01:19:24
3
Total number of marked movie
Good Bye
01:00:05
4
Corresponding buttons on the
remote control
Up Folder
624x352, 699MB
1
Up Folder
4
Move
Option
USB
Movie Selection and Popup Menu
MOVIE LIST
Page 1/1
G
No Marked
Drive 1
Title
Z.Knight.Rider
CH
Duration
Up Folder
Z.Knight.Rider
01:19:24
Good Bye
01:00:05
Page Change
MARK Mark
Exit
P l a y (During stop): Play the selected movie.
If you go to a different folder and press the
E N T E R button, the current movie in playback
will stop.
On movie playing, display the current movie status
progress bar in the bottom of the screen.
624x352, 699MB
00:13
01:19:24
Up Folder
Option
Move
Option
MOVIE LIST
CH
Page Change
Exit
MARK Mark
P l a y M a r k e d: Play the selected movie titles.
Once a movie finishes playing, the next selected one will be played automatically.
S
G t o p P l a y (During playback): Stop the playing movies.
M
a r k A l l: Mark all movies in the folder.
G
G U n m a r k A l l: Deselect all marked movies.
G D e l e t e: Delete the selected movie.
G C l o s e: Close the pop-up menu.
G
Page 1/1 No Marked
Drive 1
Title
Z.Knight.Rider
Duration
Up Folder
Z.Knight.Rider
624x352, 699MB
Play
Good Bye
Mark All
624x352, 699MB
Delete
Close
Up Folder
Move
1
2
3
Option
CH
Page Change
MARK Mark
Exit
■
Use the C H
button to navigate in the
movie page.
■ Use the M A R K button to mark or unmark a
movie file. When one or more movie files are
marked, the marked movie files will be played
in sequence. If you want to see only one movie
repeatedly, just mark that one file and play.
Select the target folder or drive.
Select the desired movies.
ENTER
ENTER
4
Show the Popup menu.
ENTER
Select the desired Popup menu.
! NOTE
G
5 RETURN
68
Return to the previous menu.
Use the left/right ( / ) keys to move to a specific
frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly
for some files while playing a movie.)
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 69
Using the remote control
You can adjust various method during movie play.
FF
When playing, repeatedly press the R E W( FF) button to speed up FF -> FFF ->
FFFF -> FFFFF ->FFFFFF .
Repeatedly press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG
-> GGGGGG.
■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
/ GG
During playback, press the P a u s e ( I I) button.
Still screen is displayed.
II
■
■
P L A Y ( G)
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y ( G) button to return to normal playback.
Picture Size
F
Full Screen
Subtitle Language
Audio Language
G
--1/1(MP3)
Subtitle
On
. Language
Latin 1
. Sync
0
. Position
1
Close
1
RED
G Picture
S i z e: Select the Full screen or Original size.
S
u
b
t
i
t
l
e
L a n g u a g e: The subtitle can be turned on or off.
G
If there are two or more subtitles, you can select one of
them.
G A u d i o L a n g u a g e: Select the language.
But, the file with only one audio can not be selected.
• S y n c: When the video is not synchronized with the caption, it can be adjusted by the unit of 0.5 second.
• P o s i t i o n: Move the location of the subtitle.
Subtitle Language
Support Language
Select the desired option.
Latin 1
French, Spanish, Catalan Basque,
Portuguese, Italian, Albanian, RhaetoRomanic, Dutch, German, Danish,
Swedish, Norwegian, Finnish, Faroese,
Icelandic, Irish, Scottish, English
Select P i c t u r e S i z e , S u b t i t l e
Language, Audio Language,
S u b t i t l e , L a n g u a g e , S y n c or
P o s i t i o n.
Latin 2
Czech, Hungarian, Polish, Romanian,
Croatian, Slovak, Slovenian, Sorvian
Return to the previous menu.
Latin 5
When DivX is playing, the above menu
is displayed.
2
3
4RETURN
Latin 4
Cyrillic
MENU
Return to TV viewing.
Greek
Hebrew
Chinese
Thai
Arabic
USB
DivX Audio Language & Subtitle Language
Estonian, the Baltic languages
Latvian(Lettish) and Lithuanian,
Greenlandic and Lappish
English, Trukish
Bulgarian, Byelorussian, Macedonian,
Russian, Serbian and pre-1990 (no ghe
with upturn) Ukrainian
English, Modern Greek
English, Modern Hebrew
Chinese
Thai
English, Arabic
69
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 70
USB
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
Enter
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Move
i
Enter
DivX(R) Video On Demand
Your registration code is : XXXXXXXXXX
To learn more visit www.divx.com/vod
Close
USB
1 MENU
Select U S B.
2
Select D i v X R e g . C o d e.
ENTER
3
ENTER
Display D i v X R e g . C o d e.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
! NOTE
When loading, some buttons may not be worked.
If you use the DivX registration code of another device, the rented or purchased DivX file cannot be
played. Therefore always use the DivX registration code assigned to this product.
70
MFL58486302-Edit3-usb 9/2/09 11:33 AM Page 71
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
Enter
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Move
i
Enter
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
i
No
USB
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is : XXXXXXXX
To learn more visit www.divx.com/vod
Close
1 MENU
2
Select U S B.
ENTER
Select Deactivation.
ENTER
Select Y e s or N o.
3
4
ENTER
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
71
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 72
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
■ RGB input source use 4:3 or 16:9 aspect ratio.
PICTURE
Move
Aspect Ratio
PICTURE
Enter
Picture Mode
: Vivid
• Contrast
Just Scan
70
• Sharpness
70
4:3
• Color
70
• Color
70
0
R
• Tint
G
0
Zoom
R
G
Cinema
Zoom 1
E
PICTURE CONTROL
Select P I C T U R E.
2
Select A s p e c t R a t i o.
3
Select the desired picture format.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
72
16:9
• Sharpness
■
ENTER
100
• Brightness 50
E
ENTER
: Vivid
• Contrast
100
• Brightness 50
• Tint
1 MENU
Enter
: 16:9
Energy Saving : Intelligent Sensor
Energy Saving : Intelligent Sensor
Picture Mode
Move
Aspect Ratio
: 16:9
■
You can also adjust A s p e c t R a t i o in
the Q . M e n u.
Press the R A T I O button repeatedly to
select the desired picture format.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 73
16:9
Zoom
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
Choose Zoom when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Just Scan
Cinema Zoom1
Choose Cinema Zoom when you want to enlarge
the picture in correct proportion.
Note: When enlarging or reducing the pictrue,
the image may become distorted.
■
or button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1-16.
PICTURE CONTROL
Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.
Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.
J u s t S c a n operates only in
Component/HDMI/DVI(720p/1080i/1080p)
input source.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
73
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 74
PICTURE CONTROL
PRESET PICTURE SETTINGS (PICTURE MODE)
There are factory presets for picture settings available in the user menus. You can use a preset, change each
setting manually.
PICTURE
Aspect Ratio
Move
PICTURE
Enter
: 16:9
Picture Mode
: Vivid
• Contrast
• Sharpness
70
• Sharpness
70
70
• Color
70
0
R
• Tint
G
PICTURE CONTROL
Select P I C T U R E.
■
ENTER
Select P i c t u r e M o d e.
■
ENTER
Select V i v i d, S t a n d a r d, C i n e m a,
S p o r t, or G a m e.
■
3
4RETURN
■
Return to the previous menu.
■
MENU
Return to TV viewing.
■
■
74
0
Standard
Cinema
Sport
Game
R
G
E
E
2
Vivid
100
• Brightness 50
• Tint
1 MENU
: Vivid
• Contrast
100
• Brightness 50
• Color
Enter
: 16:9
Energy Saving : Intelligent Sensor
Energy Saving : Intelligent Sensor
Picture Mode
Move
Aspect Ratio
V i v i d, S t a n d a r d, C i n e m a, S p o r t, and
G a m e Settings are preset for the optimum picture quality at the factory.
You can also adjust P i c t u r e M o d e in
the Q . M e n u.
V i v i d: This is the mode to maximize the
effect of the video in the retail store.
Strengthen the contrast, brightness,
sharpness and color for vivid picture.
S t a n d a r d: This is the mode to realize
optimum viewing condition for the general user.
C i n e m a: This mode optimizes video for
watching movies.
S p o r t: This is the video mode to emphasize dynamic video and primary color (Ex,
white, uniform, grass, sky blue etc.) by
realizing the optimal screen for sports.
G a m e: This is the mode to realize fast
response speed in a fast gaming screen.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 75
MANUAL PICTURE ADJUSTMENT (USER MODE)
Adjust the picture appearance to suit your preference and viewing situations.
PICTURE
Aspect Ratio
Move
Enter
: 16:9
Energy Saving : Intelligent Sensor
: Vivid
• Contrast
100
• Sharpness
70
• Color
70
• Tint
0
80
E
R
E
• Contrast
• Brightness 50
E
E
Picture Mode
Enter
G
E
1 MENU
Select P I C T U R E.
■
ENTER
Select P i c t u r e M o d e.
3
ENTER
4
ENTER
Select V i v i d, S t a n d a r d, C i n e m a, S p o r t
or G a m e.
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s,
C o l o r or T i n t.
■
■
5
ENTER
Make appropriate adjustments.
■
6RETURN
■
Return to the previous menu.
C o n t r a s t: Increase or decrease the gradient of the vidoe signal. You may use
Contrast when the bright part of picture
is saturated.
B r i g h t n e s s: Increases or decreases the
black level of video signal. You may use
Brightness when the black level of the
picture is not visible.
S h a r p n e s s: Adjusts the level of crispness in the edges between the light and
dark areas of the picture. The lower the
level, the softer the image.
C o l o r: Adjusts intensity of all colors.
T i n t: Adjusts the balance between red
and green levels.
PICTURE CONTROL
2
MENU
Return to TV viewing.
75
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 76
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video seeing differently for each input.
To reset to the factory default after making adjustments to each input source, execute the P i c t u r e R e s e t
function for each Picture Mode.
PICTURE
Move
PICTURE
Enter
Move
E
E
• Contrast
Enter
100
• Contrast
100
• Brightness
50
• Brightness
50
Color Temperature
• Sharpness
70
• Sharpness
70
Dynamic Contrast
• Color
70
• Color
70
Dynamic Color
• Tint
0
R
• Tint
G
• Advanced Control
• Picture Reset
Screen
0
• Advanced Control
• Picture reset
Screen
R
Medium
F
G
Noise Reduction
Off
Gamma
Medium
Black Level
Low
Film Mode
Off
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
ENTER
Select A d v a n c e d C o n t r o l.
ENTER
Select your desired options.
3
4
Select your desired options.
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
76
Off
Off
G
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 77
Color Temperature
Dynamic Contrast
■
Set to warm to enhance hotter colors such as red, or set to cool to make picture
bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colors so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look
more vivid.
■
Reduces screen noise without compromising video quality.
Dynamic Color
Noise Reduction
Gamma
Low : Make dark and middle gray level area of the picture brighter.
Medium: Express original picture levels.
High: Make dark and middle gray level area of the picture darker.
■ You can adjust brightness of dark area and middle gray level area of the picture.
Film Mode
■
■
Makes video clips recorded in film look more natural.
DVD and Blu-ray movies are filmed at 24 frames per second.
PICTURE CONTROL
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Auto: Realizing the black level of the screen and set it to High or Low automatically.
■ Set black level of the screen to proper level.
■ This function enables to select 'Low' or 'High' in the following mode: TV, AV, HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
77
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 78
PICTURE CONTROL
ENERGY SAVING Except 42/50PQ10R
It reduces the TV’s power consumption.
You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g level or by setting the P i c t u r e
M o d e.
PICTURE
Move
Aspect Ratio
PICTURE
Enter
: 16:9
Energy Saving : Intelligent Sensor
Picture Mode
Move
Aspect Ratio
Energy Saving : Intelligent Sensor
: Vivid
Picture Mode
: Vivid
Intelligent Sensor
• Brightness 50
Off
• Contrast
100
Minimum
• Brightness 50
• Sharpness
70
• Sharpness
Medium
70
• Color
70
• Color
70
Maximum
• Contrast
100
• Tint
0
Enter
: 16:9
R
• Tint
G
E
0R
High
F
G
G
E
1 MENU
Select P I C T U R E.
2
ENTER
E n e r g y S a v i n g.
Select
PICTURE CONTROL
3
ENTER
Select I n t e l l i g e n t S e n s o r (
Select L o w, M i d d l e or H i g h ),
O f f, M i n i m u m, M e d i u m or M a x i m u m.
4RETURN
Intelligent sensor?
This function automatically adjusts the brightness
of screen to the most suitable picture according to
the surrounding conditions.
■ You can also press the E N E R G Y S A V I N G botton on the remote control.
■
Return to the previous menu.
MENU
Return to TV viewing.
POWER SAVING PICTURE MODE For 42/50PQ10R
PICTURE
Aspect Ratio
Move
PICTURE
Enter
: 16:9
Aspect Ratio
Power Saving
: Off
Power Saving
: Off
Picture Mode
: Standard
Picture Mode
: Standard
• Contrast
100
• Brightness 50
• Sharpness
70
• Color
70
• Tint
0
G
2
ENTER
Select P o w e r S a v i n g.
ENTER
Select O f f, M i n i m u m, M e d i u m or
M a x i m u m.
3
Enter
Off
Minimum
• Contrast
100
Medium
• Brightness 50
Maximum
• Sharpness 70
• Color
R
E
78
Move
: 16:9
• Tint
E
70
0
R
G
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 79
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
Enter
PICTURE
Move
E
E
• Contrast
100
• Contrast
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Color
70
0
R
i
G
• Advanced Control
G
• Picture Reset
Screen
Select P i c t u r e R e s e t.
3
Initialize the adjusted value.
PICTURE CONTROL
Select P I C T U R E.
2
ENTER
• Color
70
Resetting video configuration...
• Tint
0 R
• Advanced Control
• Picture Reset
Screen
ENTER
100
• Brightness
• Tint
1 MENU
Enter
4 MENU
Return to TV viewing.
79
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 80
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use
Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
E
PICTURE CONTROL
1 MENU
E
Select O P T I O N.
■
2
ENTER
Select I S M M e t h o d.
■
3
ENTER
Enter
: English
Select N o r m a l, O r b i t e r, C o l o r
W a s h or W h i t e W a s h.
4RETURN
■
Return to the previous menu.
MENU
Return to TV viewing.
■
Normal
Orbiter
Color Wash
White Wash
N o r m a l: If image sticking is never a
problem, ISM is not necessary - set to
Normal.
O r b i t e r : Orbiter may help prevent
ghost images. However, it is best not to
allow any fixed image to remain on the
screen. To avoid a ghost image on the
screen, the image will move every 2 minutes.
C o l o r W a s h: The color block with the
screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred
while the temporary afterimage is
removed and the color pattern is operating.
W h i t e W a s h : White Wash removes
ghost images from the screen. Use sparingly. Watch the TV normally for a while
before using this feature to see if the
ghost image disappears on its own.
! NOTE
G
80
An excessive ghosted image may be impossible to
clear entirely with Color Wash and White Wash.
To return to normal viewing, press any button.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 81
DEMO MODE
Use it to see the difference between XD Demo on and XD Demo off.
M o d e S e t t i n g - H o m e U s e”.
This feature is disabled in “M
OPTION
Move
Menu Language
OPTION
Enter
: English
Move
Menu Language
Input Label
Enter
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off Off
E
E
XD ON
XD OFF
Off
On
On (LED On)
For 42/50PQ10R,
42PQ20R,
42/50PQ30R/60R
For 50/60PS80BR
On (LED Off)
PICTURE CONTROL
1 MENU
Select O P T I O N.
2
ENTER
3
ENTER
4
MENU
Select D e m o M o d e.
Select O n, O n ( L E D O n ), O n
( L E D O f f )(For 50/60PS80BR).
D e m o M o d e starts.
Return to TV viewing.
If you want to stop the demo, press any button.
81
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 82
PICTURE CONTROL
INITIAL SETTING (FACTORY RESET)
Use to quickly reset all the menu options to their original factory preset values.
All user settings and channel settings will be reset.
OPTION
Move
Enter
OPTION
E
SIMPLINK
Key Lock
: Off
Key Lock
Caption
: Off
Caption
Set ID
:1
Set ID
: 1settings will be reset.
ISM Method
: Normal
ISM Method
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
: Normal
Still continue?
: Off
YesUse
: Home
2
ENTER
Select I n i t i a l S e t t i n g.
ENTER
Select Y e s or N o.
3
Return to the previous menu.
MENU
Return to TV viewing.
Initial Setting
: On
: Off
i
E
PICTURE CONTROL
Select O P T I O N.
4RETURN
82
Enter
: On
Initial Setting
1 MENU
Move
E
SIMPLINK
: Off
All user settings and channel
No
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 83
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (AUTO VOLUME)
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every
time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic
adjustments for each program.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
3
-
+
0
L
R
: Standard
: Off
Clear Voice ll
: Off
On
• Level
Balance
Sound Mode
Enter
Off
3
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Select A U D I O.
ENTER
Select A u t o V o l u m e.
ENTER
Select O n or O f f.
3
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
SOUND & LANGUAGE CONTROL
2
Move
Auto Volume
• SRS TruSurround XT : Off
E
1 MENU
AUDIO
Enter
83
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 84
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
AUDIO
Enter
3
-
+
0
L
R
: Standard
: Off
Clear Voice ll
: Off
Balance
Sound Mode
2
3
-
0
L
On
+
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Select A U D I O.
ENTER
Select C l e a r V o i c e I I.
ENTER
Select O n or O f f.
3
■
SOUND & LANGUAGE CONTROL
■
Adjustment for Clear Voice Level
With selecting On
This feature adjusts the voice level.
4
ENTER
Select L e v e l.
ENTER
Make appropriate adjustments.
5
6RETURN
Return to the previous menu.
MENU
Return to TV viewing.
84
Enter
Off
• Level
E
1 MENU
Move
Auto Volume
C l e a r V o i c e I I - O n”, S R S
If you select “C
T r u S u r r o u n d X T feature will not work.
The adjustment range is -6 ~ 6.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 85
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the program content.
S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
AUDIO
Enter
3
-
+
0
L
R
: Standard
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
50
• Bass
50
E
1 MENU
Select S o u n d M o d e.
■
■
3
ENTER
+
R
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
4RETURN
Return to the previous menu.
■
■
■
MENU
Return to TV viewing.
You can also adjust S o u n d M o d e in
the Q . M E N U.
S t a n d a r d: Offers standard-quality
sound.
M u s i c: Optimizes sound for listening
to music.
C i n e m a: Optimizes sound for watching
movies.
S p o r t: Optimizes sound for watching sports
events.
G a m e: Optimizes sound for playing
games.
SOUND & LANGUAGE CONTROL
ENTER
-
0 L
Standard
Select A U D I O.
■
2
: Standard
3
Enter
Music
• SRS TruSurround XT : Off
Cinema
• Treble
50
Sport
• Bass
50
Game
E
• SRS TruSurround XT : Off
• Treble
Move
Auto Volume
85
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 86
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
Enter
3
-
+
0
L
R
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
: Standard
Enter
3
-
+
0
L
R
: Standard
XT : Off
• SRS TruSurround•SRS
TruSurround XT
• Treble
50
• Treble
• Bass
50
• Bass
E
E
50
•Treble
50
•Bass
50
E
• SRS TruSurround XT : Off
Off
E
AUDIO
50
Close
1 MENU
2
ENTER
Select A U D I O.
5
Select S o u n d M o d e.
6RETURN
ENTER
Make appropriate adjustments.
Return to the previous menu.
SOUND & LANGUAGE CONTROL
3
ENTER
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
ENTER
Select T r e b l e or B a s s.
Return to TV viewing.
4
SRS TRUSURROUND XT
Select this option to sound realistic.
1 MENU
2
ENTER
Select A U D I O.
Select S R S T r u S u r r o u n d X T.
■
3
ENTER
Select O n or O f f.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
86
MENU
■
C l e a r V o i c e I I - O n”, S R S
If you select “C
T r u S u r r o u n d X T feature will not work.
S R S T r u S u r r o u n d X T: TruSurround XT is a
patented SRS technology that solves the problem of playing 5.1 multichannel content over
two speakers.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 87
BALANCE
Adjust the left/right sound of speaker to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Sound Mode
3
-
+
0
L
R
: Standard
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
Enter
3
-
+
0
L
BalanceR
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
AUDIO
E
Balance
Enter
E
AUDIO
Close
E
Select A U D I O.
2
ENTER
Select B a l a n c e.
ENTER
Make appropriate adjustments.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
SOUND & LANGUAGE CONTROL
3
87
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 88
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.
In A V, C o m p o n e n t, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even
when there is no video signal.
If you wish to use an external Hi-Fi system or a SRS system, turn off the TV’s internal speakers.
AUDIO
Move
Enter
AUDIO
Move
E
E
Balance
0
Sound Mode
L
: Standard
R
Balance
Sound Mode
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
TV Speaker
: On
TV Speaker
: On
Off
Audio Out
: Monitor Out
Audio Out
: Monitor Out
On
1 MENU
Enter
Select A U D I O.
SOUND & LANGUAGE CONTROL
2
ENTER
Select T V S p e a k e r.
ENTER
Select O n or O f f.
3
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
! NOTE
G
88
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the home theater speaker, but when the TV speaker is turned on, the sound outputs
to the TV speaker.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 89
SELECTING AUDIO OUT Except 42/50PQ10R
Select M o n i t o r O u t or V a r i a b l e O u t to connect the audio outputs.
AUDIO
Move
Enter
AUDIO
Move
E
0
Sound Mode
L
R
: Standard
Balance
Sound Mode
2
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
1 MENU
Enter
E
Balance
• Reset
TV Speaker
: On
TV Speaker
: On
Monitor Out
Audio Out
: Monitor Out
Audio Out
: Monitor Out
Variable Out
Select A U D I O.
Select A u d i o O u t.
ENTER
Select M o n i t o r O u t or V a r i a b l e O u t.
G Refer to page 31.
3
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
SOUND & LANGUAGE CONTROL
ENTER
89
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 90
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
Enter
AUDIO
Move
E
E
Balance
Sound Mode
0
L
R
Balance
Sound Mode
: Standard
SOUND & LANGUAGE CONTROL
90
2
ENTER
L
R
• SRS TruSurround XT : Off
• Treble
50
• Bass
50
•i Treble
50 configuration...
Resetting audio
• Bass
50
• Reset
TV Speaker
: On
TV Speaker
: On
Audio Out
: Monitor Out
Audio Out
: Monitor Out
Select A U D I O.
Select R e s e t.
3
ENTER
0
: Standard
• SRS TruSurround XT : Off
• Reset
1 MENU
Enter
Initialize the adjusted value.
4 MENU
Return to TV viewing.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 91
STEREO/SAP BROADCAST SETUP
For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used
if the broadcast is only in Mono.
Q.Menu
Aspect Ratio
16:9
Picture Mode
Vivid
Sound Mode
Standard
Caption
Off
SAP
CH
F
STEREO
Sleep Timer
Off
Del/Add/Fav
Delete
G
Eject
USB Eject
Close
2
Select S A P.
Select M O N O, S T E R E O, or S A P.
3Q. MENU
Return to TV viewing.
SOUND & LANGUAGE CONTROL
1Q. MENU
91
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 92
SOUND & LANGUAGE CONTROL
ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Move
Menu Language
Input Label
English
SIMPLINK
: On
SIMPLINK
: Off
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
Demo Mode
: Off
Demo Mode
E
Enter
: English
Menu Language
Español
Portugués
: Normal
: Off
E
Confirm
1 MENU
SOUND & LANGUAGE CONTROL
2
Select O P T I O N.
ENTER
Select M e n u L a n g u a g e.
ENTER
Select your desired language.
From this point on, the on-screen menus will
be shown in the selected language.
3
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
92
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 93
CLOSED CAPTIONS
Closed captioning is a process which converts the audio portion of a television program into written words which then
appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs,
program dialogue can be arranged into captions in advance. Its possible to caption a live
program by using a process called real-time captioning, which creates
captions instantly. Real-time captioning is normally done by professional reporters using
a machine shorthand system and computer for translation into English.
FOLLOW ME
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching
language skills.
• The picture at left shows a typical caption.
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast four different caption signals on the same channel. By selecting Mode1 to Mode2,
you can choose which signal you view. Mode1 is usually the signal with the captions, while another mode might show
demonstration or programming information.
• Your TV might not receive caption signals normally in the following situations.
OPTION
Menu Language
Move
Enter
: English
Move
Menu Language
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Mode1
Set ID
:1
Set ID
:1
ISM Method
: Normal
ISM Method
: Normal Mode
Demo Mode
: Off
Demo Mode
2
Select O P T I O N.
ENTER
Select C a p t i o n.
ENTER
Select O n or O f f.
F
On
Mode1
: Off
E
1 MENU
Enter
: English
Close
G
SOUND & LANGUAGE CONTROL
Input Label
OPTION
3
4
2 or T e x t 1 -2
2.
Select M o d e1 -2
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
93
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 94
TIME SETTING
CLOCK SETTING
Clock Setup
You must set the time correctly before using on/off timer function.
TIME
Move
TIME
Enter
Clock
1 MENU
2
ENTER
Enter
Hour
Off Time
: Off
Off Time
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
: Off
F
2AM
G
--
Minute
Close
Select T I M E.
Select C l o c k.
TIME SETTING
3
Select and set H o u r or M i n u t e.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
94
Move
Clock
■
If this TV is unplugged once or turn off with the
(power) button on the TV, reset the Clock function.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 95
ON/OFF TIME SETTING
This function operates only if the current time has been set.
The O f f T i m e function overrides the O n T i m e function if they are both set to the same time.
The TV must be in standby mode for the O n T i m e to work.
If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will
automatically revert to standby mode.
TIME
Move
Enter
TIME
Clock
Move
Enter
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: 2:10 AM
Sleep Timer
: Off
Sleep Timer
2:10 AM
F
: Off
Hour
On
G
2 AM
Minute
10
Channel
TV 2
Volume
30
Close
1 MENU
■
ENTER
Select O f f t i m e or O n t i m e.
3
ENTER
■
Select and set H o u r or
M i n u t e.
To cancel O n / O f f T i m e function, select O f f.
TIME SETTING
2
Select T I M E.
Only for On Time function
4
ENTER
Select and set C h a n n e l or V o l u m e.
5RETURN
Return to the previous menu.
MENU
Return to TV viewing.
95
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 96
TIME SETTING
SLEEP TIMER SETTING
The Sleep Time turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME
Move
Enter
Clock
TIME
Move
Enter
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Off
10 min.
20 min.
30 min.
60 min.
90 min.
120 min.
180 min.
240 min.
1 MENU
2
ENTER
Select T I M E.
Select S l e e p T i m e r.
TIME SETTING
3
ENTER
Make appropriate adjustments.
4RETURN
■
Return to the previous menu.
MENU
Return to TV viewing.
96
■
You can also adjust S l e e p T i m e r in
the Q . M e n u .
Press the S L E E P button repeatedly to
select the number of minutes.
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 97
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
*This feature is not available for all models.
■
The remote control
doesn’t work
Is the sleep timer set?
Check the power control settings. Power interrupted.
■ TV will be automatically turned off, in case of no signal for 15 minutes.
■
Power is suddenly
turned off
■
The video does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
Picture appears slowly
after switching on
■
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and a VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
■
Horizontal/vertical bars
or picture shaking
■
APPENDIX
No or poor color
or poor picture
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
■
■
Check antenna (Change the direction of the antenna).
■
Check HDMI cable over version 1.3.
The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen
display. In this case use the latest cables that support HDMI version 1.3.
97
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 98
APPENDIX
The audio does not work.
Press the VOL or VOLUME button.
Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
■
Picture OK & No sound
No output from one
of the speakers
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
Unusual sound from
inside the product
No sound
when connecting HDMI
or USB
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
■ Use normal MP3 file.
■
■
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
APPENDIX
98
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable
or single color
■
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
■
Work the Auto configure or adjust size, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
■
■
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 99
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
99
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 100
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
42PQ20R
(42PQ20R-MA)
50PQ10R
(50PQ10R-MB)
40.5 x 28.3 x 12.1 inches
47.9 x 32.2 x 13.8 inches 40.5 x 28.3 x 12.1 inches
1031.2 x 720.9 x 308.0 mm 1216.7 x 818.1 x 353.0 mm 1031.2 x 720.9 x 308.0 mm
Dimensions
(Width x Height
x Depth)
With stand
Without stand
40.5 x 25.8 x 3.1 inches
1031.2 x 656.7 x 80.8mm
Weight
With stand
Without stand
53.5 lbs / 24.3 kg
48.9 lbs / 22.2 kg
MODELS
47.9 x 29.8 x 3.2 inches 40.5 x 25.8 x 3.1 inches
1216.7 x 759.0 x 83.0 mm 1031.2 x 656.7 x 80.8mm
54.6 lbs / 24.8 kg
50.0 lbs / 22.7 kg
74.2 lbs / 33.7 kg
68.7 lbs / 31.2 kg
42PQ30R
(42PQ30R-MA)
50PQ30R
(50PQ30R-MA)
Dimensions
(Width x Height
x Depth)
With stand
40.5 x 28.3 x 12.1 inches
1031.2 x 720.9 x 308.0 mm
47.9 x 32.2 x 13.8 inches
1216.7 x 818.1 x 353.0 mm
Without stand
40.5 x 25.8 x 3.1 inches
1031.2 x 656.7 x 80.8 mm
47.9 x 29.8 x 3.2 inches
1216.7 x 759.0 x 83.0 mm
Weight
With stand
Without stand
54.6 lbs / 24.8 kg
50.0 lbs / 22.7 kg
74.2 lbs / 33.7 kg
68.7 lbs / 31.2 kg
Power requirement
Television System
Program Coverage
External Antenna Impedance
Environment
condition
APPENDIX
100
42PQ10R
(42PQ10R-MB)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
MOVIE(*.avi/*.Divx) supporting file
AC100-240V ~ 50/60Hz
NTSC, PAL-M/N
VHF 2-13, UHF 14-69, CATV 1-125
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Refer to page 67
MFL58486302-Edit4-en 9/2/09 11:47 AM Page 101
MODELS
50PQ60R
(50PQ60R-MA)
Dimensions
(Width x Height
x Depth)
With stand
40.9 x 28.5 x 12.1 inches
1040.8 x 725.8 x 308.0 mm
48.3 x 32.4 x 13.8 inches
1228.8 x 824.6 x 353.0 mm
Without stand
40.9 x 26.3 x 3.0 inches
1040.8 x 669.2 x 76.8 mm
48.3 x 30.3 x 3.1 inches
1228.8 x 772.0 x 78.9 mm
Weight
With stand
Without stand
55.7 lbs / 25.3 kg
51.3 lbs / 23.3 kg
77.1 lbs / 35.0 kg
71.6 lbs / 32.5 kg
MODELS
50PS80BR
(50PS80BR-MA)
60PS80BR
(60PS80BR-MA)
Dimensions
(Width x Height
x Depth)
With stand
48.3 x 32.9x 12.2inches
1228.8 x 835.8 x 309 mm
57.7 x 38.9 x 14.6 inches
1465.4x 986.4 x 371 mm
Without stand
48.3 x 31.3 x 3.1 inches
1228.8x 795.1 x 78.9 mm
57.7 x 36.5 x 3.2 inches
1465.4 x 926.7 x 82.1 mm
Weight
With stand
Without stand
84.4 lbs / 38.3 kg
75.6 lbs / 34.3kg
118.1 lbs / 53.6kg
102.7 lbs / 46.6kg
Power requirement
Television System
Program Coverage
External Antenna Impedance
Environment
condition
Operating Temperature
Operating Humidity
MOVIE(*.avi/*.Divx) supporting file
AC100-240V ~ 50/60Hz
NTSC, PAL-M/N
VHF 2-13, UHF 14-69, CATV 1-125
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Refer to page 67
APPENDIX
Storage Temperature
Storage Humidity
■
42PQ60R
(42PQ60R-MA)
The specifications shown above may be changed without prior notice for quality improvement.
101
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 102
APPENDIX
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
9 ms
4.5 ms
APPENDIX
■
Repeat code
0.55 ms
9 ms
■
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
■
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
102
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 103
Code
(Hexa)
Function
Note
08
POWER
Remote control Button (Power On/Off)
45
Q.MENU
Remote control Button
43
MENU
Remote control Button
0B
INPUT
Remote control Button
10-19
Number Key 0-9
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL -
Remote control Button
00
CH
Remote control Button
01
CH
Remote control Button
1E
FAV
Remote control Button
40
Remote control Button
41
Remote control Button
07
Remote control Button
06
Remote control Button
X STUDIO
Remote control Button
44
ENTER
Remote control Button
5B
RETURN
Remote control Button
7E
SIMPLINK
Remote control Button
0E
SLEEP
Remote control Button
30
AV MODE
Remote control Button
79
RATIO
Remote control Button
95
ENERGY SAVING
Remote control Button
53
LIST
Remote control Button
1A
Q.VIEW
Remote control Button
65
FREEZE
Remote control Button
72
RED
Remote control Button
63
YELLOW(PLAY)
Remote control Button
61
BLUE (PAUSE)
Remote control Button
71
GREEN (STOP)
Remote control Button
8F
REW
Remote control Button
8E
FF
Remote control Button
APPENDIX
7C
Except 42/50PQ10R
103
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 104
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the TV’s functions externally.
■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.
The instructions below are provided to help with programming software or to test functionality using telenet
software.
RS-232C Setup
HDMI
HDMI/DVI IN
1
HDM
2
RS-232C IN
(CONTROL & SERVICE)
RGB
PC
Type of Connector; D-Sub 9-Pin Male
APPENDIX
104
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
Communication Parameters
Baud rate : 9600 bps (UART)
■ Data length : 8 bits
■ Parity : None
■ Stop bit : 1 bit
■ Communication code : ASCII code
■ Use a crossed (reverse) cable.
■
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 105
RS-232C Configurations
Either cable below can be used.
7-Wire Configuration
(Serial female-female NULL modem cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
OPTION
Move
Menu Language
Enter
: English
Input Label
OPTION
Input Label
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Caption
: Off
Caption
: Off
Set ID
ISM Method
: Normal
: Off
Demo Mode
: Off
Select O P T I O N.
ENTER
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is
1~99.
4RETURN
Return to the previous menu.
MENU
Return to TV viewing.
E
* Real data mapping 1
00 : Step 0
A : Step 10
F : Step 15
10 : Step 16
1
G
APPENDIX
: Normal
Demo Mode
2
3
F
ISM Method
E
ENTER
Enter
: English
SIMPLINK
Set ID
1 MENU
Move
Menu Language
Close
* Real data mapping 2
00: -30
01: -29
02: -28
1E:
0
28: +10
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
3A : +28
3B : +29
3C : +30
4E: N/A
4F : N/A
50: N/A
FE : Step 254
FF : Step 255
105
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 106
APPENDIX
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 ~ 01
14. Color Temperature
k
u
00 ~ 02
02. Aspect Ratio
k
c
Refer to p.107
15. Treble
k
r
00 ~ 64
03. Screen Mute
k
d
Refer to p.107
16. Bass
k
s
00 ~ 64
04. Volume Mute
k
e
00 ~ 01
17. Abnormal State
k
z
FF
05. Volume Control
k
f
00 ~ 64
18. ISM Method
j
p
Refer to p.109
06. Contrast
k
g
00 ~ 64
19. Auto Configure
j
u
01
07. Brightness
k
h
00 ~ 64
20. Low Power(Power/Energy Saving)j
q
Refer to p.109
08. Color
k
i
00 ~ 64
21. Channel Tuning
m
a
Refer to p.110
09. Tint
k
j
00 ~ 64
22. Channel Add/Del
m
b
00 ~ 01
10. Sharpness
k
k
00 ~ 64
23. Key
m
c
Refer to p.111
11. OSD Select
k
k
l
m
00 ~ 01
24. Input select (Main)
x
b
Refer to p.111
k
t
00 ~ 64
12. Remote Control Lock
/Key Lock Mode
13. Balance
00 ~ 01
Except 42/50PQ10R
Transmission / Receiving Protocol
Transmission
APPENDIX
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected the TV is
controlled. Set ID is indicated as decimal (1~ 99) on
menu and as Hexa decimal (0x0~ 0x63) on transmission
/receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
106
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions
or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 107
0 1 . Power (Command: k a)
04. Volume Mute (Command: k e)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.”
0 5 . Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
02: 16:9
09: Just Scan
04: Zoom
10: Cinema Zoom1
1F: Cinema Zoom16
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][g][ ][Set ID][ ][Data][Cr]
* Using the RGB input, you select either 16:9 or 4:3
screen aspect ratio.
* Just Scanoperates only in Component/HDMI(720p/1080i/1080p)
input source.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’.
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
To select screen mute on/off.
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data 00 :
Data 01 :
Data 00 :
Data 10 :
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’.
Screen mute off (Picture on)
Screen mute on (Picture off)
Video mute off
Video mute on
APPENDIX
0 7 . Brightness (Command: k h)
0 3 . Screen Mute (Command: k d)
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video mute on only, TV will display
On Screen Display(OSD). But, in case of Screen
mute on, TV will not display OSD.
107
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 108
APPENDIX
08. Color (Command: k i)
13. Balance (Command: k t)
To adjust the screen color.
You can also adjust color in the Picture menu.
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’.
Refer to ‘Real data mapping 1’.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
14. Color Temperature (Command: k u)
09. Tint (Command: k j)
Transmission [k][j][ ][Set ID][ ][Data][Cr]
To adjust color temperature.
You can also adjust Color Temperature in the Picture
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
Data 00: Medium 01: Cool 02: Warm
Refer to ‘Real data mapping 1’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
15. Treble (Command: k r)
To adjust treble.
10. Sharpness (Command: k k)
You can also adjust sharpness in the Picture menu.
You can also adjust treble in the Audio menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’.
Data Min: 00 ~ Max: 64
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen sharpness.
Refer to ‘Real data mapping 1’.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
To adjust bass.
APPENDIX
11. OSD Select (Command: k l)
You can also adjust bass in the Audio menu.
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Refer to ‘Real data mapping 1’.
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
12. Remote Control Lock/Key Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
(If you’re not using the remote control and front
panel controls on the TV, use this mode. When main
power is on/off, remote control lock is released.)
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
108
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 109
17. Abnormal State (Command: k z)
1 9 . A u t o C o n f i g u r e ( C o m m a n d : j u ) Except 42/50PQ10R
To recognize an abnormal state.
To adjust picture position and minimize image
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
MSB
LSB
0
0
0
0
0
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
2 0 . Low Power(Power/Energy Saving) ( C o m m a n d : j q )
To reduce the power consumption of the TV.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 00: Power/Energy Saving off
Data 01: Power/Energy Saving: Minimum
Data 02: Power/Energy Saving: Medium
Data 03: Power/Energy Saving: Maximum
Data 10: Intelligent Sensor: Low (Except 42/50PQ10R)
Data 11: Intelligent Sensor: Middle (Except 42/50PQ10R)
Data 12: Intelligent Sensor: High (Except 42/50PQ10R)
18. ISM Method (Command: j p)
0
shaking automatically. It works only in RGB (PC)
mode.
0
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
* Power saving: For 42/50PQ10R
* Energy Saving: Except 42/50PQ10R
0
Orbiter
White Wash
Normal
7
6 5
1
4
0
3
2
1
0
Function
0
0
1
0
Orbiter
0
1
0
0 White Wash
1
0
0
0
Normal
0
0
0
0
Color Wash
APPENDIX
Color Wash
Data 02: Orbiter
Data 04: White Wash
Data 08: Normal
Data 20: Color Wash
* More two kinds of function can not be set at a time.
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
109
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 110
APPENDIX
21 . Channel Tuning (Command: m a)
Tune Channel to following Physical/major/minor number
Example)
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
1. Analog channel: NTSC cable, channel number(35), main picture
Command: ma 00 23 xx xx xx xx 01
Data 0: Physical Channel Number(Transmit by Hexadecimal
code)
NTSC air: 02~45
attribute(0x01): main picture, two part(it’s not mandatory),
using physical channel, NTSC cabl xx’ data: don’t care major
and minor channel number in case analog channel tuning
NTSC cable: 01, 0e~7d
Acknowledgement[a][ ][Set ID][][OK][Data0][Data1]
[Data2][Data3][Data4][Data5][x][a][ ][Set ID]
Data1, Data2: Major Channel Number(two part) or
Channel Number(one part)
[ ][NG][Data0][x]
Data1: High byte
Data2: Low byte
Two part channel number: Major number-Minor number
One part channel number:
In case of using one part channel number, minor channel does not need.
Data3, Data4: Minor Channel Number
Not needed for NTSC.
Data3: High byte
Data4: Low byte
Data5:
Attribute
7
Main/Sub
Picture
6
Two/One
Part Channel
5
Using Physical
Channel
4
3
2
1
0
Step
NTSC air
NTSC cable
Reserved
0 Main
0 Two
0 Use
x
0
0
0
0
1 Sub
1 One
1 No Use
x
0
0
0
1
APPENDIX
* T w o / O n e p a r t C h a n n e l : 6t h b i t
This bit is used in a cable-ready system.
* U s i n g p h y s i c a l c h a n n e l : 5t h b i t
If the channel band is NTSC air or NTSC cable, channel tuning
can be done by only physical channel. In this case, using physical
channel bit must be low(0).
110
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 111
22. Channel Add/Del(Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Channel Delete
01 : Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b)
(Main Picture Input)
To select input source for TV
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data: Structure
MSB
0
LSB
0
0
0
External Input
23. K e y (Command: m c)
0
0
0
Input Number
External Input
To send IR remote key code.
0
Data
Analog
Transmission [m][c][ ][Set ID][ ][Data][Cr]
0
0
0
1
Data: Key code - Refer to page 103.
0
0
1
0
AV
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
0
1
0
0
Component
0
1
1
0
RGB
1
0
0
1
HDMI
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
111
MFL58486302-Edit4-en 9/2/09 11:48 AM Page 112
Download PDF

advertising