LG | 55LM7600 | LG 47LM6700 Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set
and retain it for future reference.
32LM6200
42LM6200
47LM6200
55LM6200
47LM6210
55LM6210
47LM6250
55LM6250
P/NO : MFL67468130 (1205-REV01)
47LM6400
55LM6400
60LM6450
42LM6700
47LM6700
55LM6700
47LM7600
55LM7600
www.lg.com
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
ENGLISH
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol
& DTS and the Symbol together are registered trademarks & DTS 2.0+Digital
Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
IMPORTANT SAFETY INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
yy
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
Clean only with a dry cloth.
yy
The lightning flash with arrowhead
WARNING/CAUTION
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
Do not block any ventilation openings. Install
yy
in accordance with the manufacturer’s
instructions.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
Do not install near any heat sources such
yy
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Do not defeat the safety purpose of the
yy
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).
ENGLISH
WARNING/CAUTION
4
IMPORTANT SAFETY INSTRUCTIONS
Protect the power cord from being walked on
yy
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
yy
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
yy
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
ENGLISH
Unplug this apparatus during lightning
yy
storms or when unused for long periods of
time.
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Short-circuit
Breaker
Refer all servicing to qualified service
yy
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Do not stick metal objects or any other
yy
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
Short-circuit
Breaker
Keep the packing anti-moisture material or
yy
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
CAUTION concerning the Power Cord
yy
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
Power
Supply
wall
outlets, extension cords, frayed power
Power Supply
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
Power
if Supply
its appearance indicates damage or
deterioration,
unplug it, discontinue use of
Power Supply
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
Power
Supply
the
cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
IMPORTANT SAFETY INSTRUCTIONS
Warning - To reduce the risk of fire or
yy
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
Do not expose to dripping or splashing and
yy
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
As long as this unit is connected to the AC
yy
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in any
yy
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
yy
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Power Supply
DISCONNECTING DEVICE FROM THE MAIN
yy
POWER
Mains plug is the disconnecting device. The
plug must remain readily operable.
Antenna Lead in Wire
Ground Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamp
NEC: National Electrical Code
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
ENGLISH
Grounding
yy
(Except for devices which are not grounded.)
Ensure that you connect the earth
Power ground
Supply
Short-circuit
wire to prevent possible
electric shock
Breaker
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
5
6
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Cleaning
yy
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
yy
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
yy
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
yy
from the TV, unplug the power cord and
contact an authorized service center.
Do not press strongly upon the panel with a
yy
Supply
hand or a sharp objectShort-circuit
such as aPower
nail,
pencil
Breaker
or pen, or make a scratch on it.
Keep the product away from direct sunlight.
yy
Never touch this apparatus or antenna during
yy
a thunder or lightning storm.
When mounting a TV on the wall, make sure
yy
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
yy
to fall into the product, and do not drop
anything onto the screen.
Dot Defect
yy
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
yy
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation
yy
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
If the TV feels cold to the touch, there may
yy
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
IMPORTANT SAFETY INSTRUCTIONS
7
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of this
product with general household waste. Disposal of
this product must be carried out in accordance to
the regulations of your local authority.
Preventing “Image burn” or “Burn-in” on your TV screen
For USA and Canada
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.
ENGLISH
If a fixed image displays on the TV screen
yy
for a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is “image burn” or “burn-in”
and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for
yy
a long period of time, image burn may occur
on the letterboxed area of the screen.
Avoid displaying a fixed image on the TV
yy
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
8
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging
WARNING
Viewing Environment
Viewing Time
yy
- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
ENGLISH
Some users may experience a seizure or other abnormal symptoms when they are exposed to a
yy
flashing light or particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as
yy
epilepsy, cardiac disorder, or blood pressure disease, etc.
3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
yy
Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
yy
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
yy
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy
When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
yy
the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
IMPORTANT SAFETY INSTRUCTIONS
9
CAUTION
Viewing Environment
Viewing Distance
yy
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yy
Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yy
Using modified 3D glasses may cause eye strain or image distortion.
yy
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yy
The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when
yy
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
ENGLISH
Infants / Children
yy
- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring and
extra attention is required for children watching 3D contents.
- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth
compared to adults for the same 3D image.
Teenagers
yy
- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to
watch 3D videos for a long time when they are tired.
Elderly
yy
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the
recommended distance.
10
TABLE OF CONTENTS
TABLE OF CONTENTS
2
LICENSES
2
OPEN SOURCE SOFTWARE NOTICE
3
IMPORTANT SAFETY INSTRUCTIONS
8
Viewing 3D Imaging
10
TABLE OF CONTENTS
11
30 REMOTE CONTROL
32
33
33
33
Magic Remote Control Functions
-Registering Magic Remote Control
-How to use Magic Remote Control
-Precautions to Take when Using the
Magic Remote Control
34 WATCHING TV
ENGLISH
34
Turning the TV on for the first time
Installation Procedure
35
Using the User guide
11
ASSEMBLING AND PREPARING
36
SPECIFICATIONS
11
13
14
16
17
17
18
19
20
Unpacking
Optional Extras
Parts and buttons
Lifting and moving the TV
Setting up the TV
-Attaching the stand
-Mounting on a table
-Tidying cables
-Mounting on a wall
21
MAKING CONNECTIONS
21
22
Connecting to an antenna or cable
Connecting to a HD receiver, DVD, or VCR
player
-HDMI Connection
-DVI to HDMI Connection
-Component Connection
-Composite Connection
Connecting to a PC
-HDMI Connection, DVI to HDMI
Connection or RGB Connection
Connecting to an Audio System
-Digital Optical Audio Connection
Connecting to a USB
22
23
24
25
26
26
28
28
29
42 MAINTENANCE
42
42
42
Cleaning Your TV
-Screen, frame, cabinet and stand
-Power cord
42 TROUBLESHOOTING
NOTE
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may
yy
differ slightly from that shown in this
manual.
The available menus and options may differ
yy
from the input source or product model that
you are using.
New features may be added to this TV in
yy
the future.
ASSEMBLING AND PREPARING
11
Installation Procedure
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
yy
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39
yy
inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit
yy
into your TV's USB port.
B
A
*A
*B
B
A
10 mm (0.39 inches)
18 mm (0.7 inches)
ENGLISH
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
12
ASSEMBLING AND PREPARING
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control and batteries
(AAA) (Depending on model)
(See p.30)
Cable holder
(Depending on model)
(See p.19)
Stand Screws
8 EA, M4 x 20
(See p.17)
Component video cable
(See p.24)
Composite video cable
(See p.24, 25)
Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
Owner’s manual
Stand Body & Base
(See p.17)
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Power Cord
(Depending on model)
Wall mount inner spacers
4 EA
(Depending on model)
(See p.20)
Desk-mount Screw
2 EA
(Depending on model)
(See p.18)
Bracket Screw
M4 x 8, 2 EA
(Depending on model)
(See p.18)
Desk-mount Cable
2 EA
(Depending on model)
(See p.18)
ENGLISH
Magic Remote Control,
Batteries (AA)
(See p.32)
ASSEMBLING AND PREPARING
13
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
AN-MR300
Magic remote control
AG-F2**, AG-F3**
Cinema 3D glasses
The model name or design may be changed manufacturer’s circumstances or policies.
ENGLISH
14
ASSEMBLING AND PREPARING
Parts and buttons
For LM6400/6450/6700/7600 series
Screen
Buttons
OK
SETTINGS
INPUT
ENGLISH
Speakers
Remote control and
intelligent sensors1
Power indicator
Button
Description
Scrolls through the saved channels.
^v
+ -
Adjusts the volume level.
✔ OK
Selects the highlighted menu option or confirms an input.
S SETTINGS
Accesses the main menu, or saves your input and exits the menus.
m INPUT
Changes the input source.
(
/ I)
Turns the power on or off.
USB IN
3 USB Appps
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING
15
For LM6200/6210/6250 series
Screen
Remote control and
intelligent sensors1
Power indicator
OK
SETTINGS
Touch Button
INPUT
Touch buttons2
Description
Scrolls through the saved channels.
Adjusts the volume level.
H
OK ⊙
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menu, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ENGLISH
Speakers
16
ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
CAUTION
When transporting a large TV, there should
yy
be at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
Avoid touching the screen at all times, as
yy
this may result in damage to the screen.
It is recommended to move the TV in the
yy
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
yy
the power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
ENGLISH
Hold the top and bottom of the TV frame
yy
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
ASSEMBLING AND PREPARING
17
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
1
4
4 EA
M4 x 20
Stand Body
Front
Stand Base
Top View
2
4 EA
Wrapping bag (Depending on model)
5
Protection pad
(Depending on model)
3
Caution
When attaching the stand to the TV
yy
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Tighten the screws firmly to prevent the
yy
TV from tilting forward.
ENGLISH
M4 x 20
18
ASSEMBLING AND PREPARING
Mounting on a table
Securing the TV to a table
1 Lift and tilt the TV into its upright position on a
table.
-Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
(Depending on model)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
1 Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2 Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3 Once the TV is fixed, move the table close to
10 cm (4 inches)
the wall. Children may go in, causing injuries.
10 cm
10 cm
10 cm

2 Connect the power cord to a wall outlet.
Caution
ENGLISH
Do not place the TV near or on sources
yy
of heat, as this may result in fire or other
damage.
M4 x 8
2 EA
warning
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
10˚
10˚
Note
When adjusting the angle of the TV, watch
yy
out for your fingers.
»»Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
To prevent TV from falling over, the TV
yy
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
19
Tidying cables
1 Gather and bind the cables with the cable
holder.
1 Insert and tighten the eye-bolts, or TV brackets
Cable holder
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Fix the cable management clip firmly to the TV.
ENGLISH
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
Caution
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
yy
can obtain additional accessories from your
local dealer.
Cable management clip
CAUTION
Do not move the TV by holding the cable
yy
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
20
ASSEMBLING AND PREPARING
Mounting on a wall
Caution
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm (4 inches)
10 cm
Disconnect the power first, and then move
yy
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
yy
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
10 cm
Note
10 cm
ENGLISH
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Model
32LM6200
42/47/55LM6200
47/55LM6210
47/55LM6250
47/55LM6400
60LM6450
42/47/55LM6700
47/55LM7600
VESA
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 200
M6
4
LSW200BX
400 x 400
M6
4
LSW400BX
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
yy
supplied with the wall mount.
When attaching a third-party wall mounting
yy
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG wall
mounting bracket.
Wall Mount Inner Spacer
MAKING CONNECTIONS
21
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
yy
to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual
provided with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy
Refer to the external equipment’s manual for operating instructions.
yy
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may
differ from the actual items and a RF cable is optional.
UHF Antenna
Antenna
ANTENNA / CABLE
Coaxial (75Ω)
PRECAUCIÓN
Asegúrese de no doblar el alambre de cobre
yy
del cable de RF.
Alambre de cobre
Primero conecte todos los dispositivos entre
yy
sí y luego conecte el cable de alimentación
al tomacorriente, para que el televisor no
resulte dañado.
Terminal
NOTA
Utilice un divisor de señal para más de 2
yy
televisores.
Visite http://lgknowledgebase.com para
yy
obtener más información sobre la conexión
de la antena y el cable. Busque la antena.
ENGLISH
VHF Antenna
22
MAKING CONNECTIONS
Connecting to a HD receiver, DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device
and the TV with the HDMI cable as shown in the following illustration.
NOTE
Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
yy
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.
yy
4 (PC)
Choose any HDMI input port to connect.
It does not matter which port you use.
HDMI
(*Not Provided)
1(ARC)
2
IN
3
ENGLISH
DVD/ Blu-Ray / HD Cable Box / HD STB
NOTE
DTV Audio Supported Codec: MPEG, Dolby
yy
Digital
HDMI Audio Supporeted Format: Dolby
yy
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/
88k/96k/176k/192k) -> Not supported DTS.
ARC (Audio Return Channel)
When connected with a high-speed
yy
HDMI cable, digital audio can be sent to a
compactible device without an additional
optical audio cable.
ARC is only supported on the HDMI input
yy
1 (ARC) port. An external audio device that
supports ARC should be connected to
HDMI 1 if you wish to use ARC.
MAKING CONNECTIONS
23
DVI to HDMI Connection
4 (PC)
Transmits the digital video signal from an external device to the TV. Connect the external device and the
TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an
audio cable.
DVI OUT
IN
(*Not Provided)
(*Not Provided)
AUDIO OUT
DVD/ Blu-Ray / HD Cable Box
AUDIO
AUDIO
ENGLISH
(RGB/HDMI-PC)
(RGB/HDMI-PC)
24
MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device
and the TV with a component cable as shown in the following illustration.
NOTE
If cables are installed incorrectly, it could cause the image to display in black and white or with
yy
distorted color.
Check to ensure each cable is matched with the corresponding color connection.
yy
IN
COMPONENT
AV
VIDEO
AUDIO
PR
PB
Y
ENGLISH
YELLOW
GREEN
(Use the component video cable provided.)
(Use the composite video cable provided.)
GREEN
BLUE
RED
GREEN
BLUE
RED
RED
WHITE
RED
WHITE
YELLOW
(*Not Provided)
(*Not Provided)
RED
BLUE
GREEN
RED
WHITE
L
R
AUDIO
VIDEO
DVD/ Blu-Ray / HD Cable Box
MAKING CONNECTIONS
25
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device
and the TV with the composite cable as shown in the following illustration.
NOTE
Check to ensure each cable is matched with the corresponding color connection.
yy
AV
VIDEO
AUDIO
IN
COMPONENT
PR
PB
Y
ENGLISH
YELLOW
(Use the composite video cable provided.)
RED
WHITE
YELLOW
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
VCR / DVD/ Blu-Ray / HD Cable Box
26
MAKING CONNECTIONS
Connecting to a PC
NOTE
It is recommended to use the HDMI connection for the best image quality.
yy
Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
yy
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
yy
brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
yy
Depending on the graphics card, some resolution settings may not allow the image to be positioned
yy
on the screen properly.
HDMI Connection, DVI to HDMI Connection or RGB Connection
Choose method A, B, or C to make connection.
Method A: HDMI Connection
4 (PC)
HDMI
IN
3
(*Not Provided)
2
PC
IN
4 (PC)
1(ARC)
ENGLISH
Choose any HDMI input port to connect.
It is recommended to connect the DVI-HDMI
to HDMI IN 4.
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
1
2
27
4 (PC)
1(ARC)
MAKING CONNECTIONS
IN
4 (PC)
Method B: DVI to HDMI Connection
(*Not Provided)
(RGB/HDMI-PC)
(RGB/HDMI-PC)
IN
AUDIO
AUDIO
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
AUDIO OUT
(*Not Provided)
AUDIO OUT
DVI OUT
ENGLISH
PC
Method C: RGB Connection
(PC)
(PC)
RGB
RGB
(PC)
(PC)
RGB
RGB
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
(RGB/HDMI-PC)
(RGB/HDMI-PC)
AUDIO
AUDIO
AUDIO OUT
(*Not Provided)
(*Not Provided)
RGB OUT (PC)
RGB OUT (PC)
AUDIO OUT
DVI OUT
PC
28
MAKING CONNECTIONS
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
NOTE
If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature
yy
to off.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV
with the optical audio cable as shown in the following illustration.
NOTE
Do not look into the optical output port. Looking at the laser beam may damage your vision.
yy
Audio with ACP (Audio Copy Protection) function may block digital audio output.
yy
ENGLISH
OUT
OPTICAL
DIGITAL
AUDIO
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
MAKING CONNECTIONS
29
Connecting to a USB
Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card
reader to the TV and access the Smart Share menu to use various multimedia files.
NOTE
To store apps on a USB storage device, make sure that it is connected to the USB IN 3 USB Apps
yy
port.
To use a USB Hub device, make sure that it is connected to the USB IN 2 USB port.
yy
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect
yy
it to the USB port on the TV directly.
Choose any USB input port to connect.
It does not matter which port you use.
USB IN
1
USB
ENGLISH
HDD IN 2 USB Hub
3 USB Apps
(*Not Provided)
30
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the and ends to the label inside the compartment, and close the battery cover. To
remove the batteries, perform the installation actions in reverse.
Caution
Do not mix old and new batteries, as this may damage the remote control.
yy
BACK
HOME
Make sure to point the remote control toward at the remote control sensor on the TV.
VOL
RATIO
INPUT
(User-Guide)
My APPS
Sees
User-Guide.
TV
ENGLISH
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
RATIO
Resizes an image.
INPUT
Changes the input source; Turns the TV on.
TV
CH
MUTE
Q.MENU
SETTINGS
HOME
MY APPS
OK
AV MODE EXIT
ENERGY
SAVING
INFO
REC
Returns to the last TV channel.
REC
FAV
VOL
CH
(POWER)
Turns the TV on or off.
P
A
G
E
Number button
Enters numbers.
LIST, - (Dash)
LIST: Accesses the saved channel list.
- (Dash): Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Alternates between the two last channels selected (pressing
repeatedly).
REMOTE CONTROL
31
+ VOL Adjusts the volume level.
FAV
Accesses your favorite channel list.
RATIO
INPUT
3D
TV
Used for viewing 3D video.
1
2
3
MUTE
Mutes all sounds.
4
5
6
7
8
9
^ CH v, PAGE
CH: Scrolls through the saved channels.
RECMoves
REC to the previous or next screen.
PAGE:
REC
0
FLASHBK
LIST
SETTINGS
Accesses the main menu.
FAV
VOL
CH
MUTE
Q.MENU
HOME
MY APPS
OK
MY
REC APPS
Shows the list of Apps.
Q. MENU
Accesses the quick menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
(BACK)
Returns to the previous level.
AV MODE EXIT
AV MODEREC
Selects an AV mode.
REC
EXIT
Clears all on-screen displays and returns to TV viewing.
ENERGY
SAVING
INFO
REC
Color buttons
These access special functions in some menus.
Control buttons
Controls the Premium contents, Smart Share menus, or the
SIMPLINK compatible devices (USB,SIMPLINK).
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
REC
ENERGY SAVING
Adjusts the brightness of the screen to reduce energy
consumption.
INFO
Views the information of the current program and screen.
REC
REC
ENGLISH
SETTINGS
HOME REC
Accesses the HOME menu.
P
A
G
E
32
REMOTE CONTROL
Magic Remote Control Functions
When the message “Magic remote control battery is low. Change the battery.” is
displayed, replace the battery. To replace batteries, open the battery cover, replace
batteries (1.5 V AA) matching and ends to the label inside the compartment,
and close the battery cover. Be sure to point the remote control at the remote control
sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
Make sure to point the remote control at the remote control sensor on the TV.
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
ENGLISH
Wheel (OK)
Selects menus or options and confirms
your input.
Scrolls through the saved channels.
If you press the navigation button while
moving the pointer on the screen, the
pointer disappears, and the Magic remote
control works as a regular remote control.
To display the pointer again, shake the
Magic remote control from side to side.
Used for viewing 3D video.
HOME
Accesses the Home menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.
MY APPS
Shows the list of Apps.
Q.MENU
Accesses the quick menu.
REMOTE CONTROL
Registering Magic Remote Control
1
33
2
i
The Magic Remote Control operates by pairing
with your TV.
Once you purchased the TV, please register the
Magic remote control as follows;
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the TV
on and press the
Wheel (OK). When
registration is completed, the completion
message appears on the screen.
If registration fails, turn the TV off and
back on, then press the
Wheel (OK) to
complete registration.
How to Re-register the Magic Remote Control
BACK
How to use Magic Remote Control
1 You can move the pointer by aiming the
Pointer Receiver of the remote control
at your TV then move it left, right, up or
down.
»»If the pointer does not work properly
leave the remote control for 10 seconds
then use it again.
2 If the pointer disappears, move the
remote control slightly to left or right.
Then, it will automatically appear on the
screen.
»»If the pointer has not been used for a
certain period of time, it will disappear.
1
If you press
Wheel (OK) on the Magic
remote control, the screen appears.
Shows information about the current program
and screen.
2
Pressing this button will display number
keypad which you can select channel number.
3
You can select My Apps Menu.
Precautions to Take when Using
the Magic Remote Control
Use the Magic remote control within the
yy
maximum communication distance (10 m,
32.8ft). Using the remote control beyond
this distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
remote control.
The Magic remote control may be damaged
yy
or may malfunction if it is dropped or
receives a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
remote control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the Magic remote control may
not perform as expected due to frequency
interference.
ENGLISH
HOME
1 Press and hold the
BACK and
HOME buttons together for 5 seconds
to reset, then register it by following
“How to register the Magic remote
control” above.
2 To re-register the Magic remote control,
press and hold the
BACK button for 5
seconds toward the TV.
3
34
WATCHING TV
WATCHING TV
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press the power button on
the remote control to turn the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Initial Setting by
yy
accessing OPTION in the main menu.
3 Follow the on-screen instructions to customize
ENGLISH
your TV settings according to your preferences.
Language Selection*
Selects a language to
display.

Using the Magic remote Sets the Magic remote
contol.
control

Enviroment Selection
Select Home* for the
home environment.

Time Zone Setting

Network Connection

Auto Tuning
Selects the time zone
and daylight saving.
(Depending on country)
Sets your network to
enable network-related
features on the TV.
Scans and saves available
channels automatically.

Auto Energy Saving
mode Setting
Selects Auto Energy
Saving mode.
(Depending on model)

Setting is completed.
Confirms the setting
options.
NOTE
Select Home when prompted. Store
yy
mode puts the TV in demo mode.
If you select Store, the any customized
yy
settings will switch back to the default
settings of Store in 5 minutes.
4 When the basic settings are complete,
press
(Wheel).
NOTE
If you do not complete the Initial setting,
yy
it will appear whenever the TV turns on.
Disconnect the power cord from the
yy
power outlet when you do not use the TV
for a long period of time.
5 To turn the TV off, press the power button on
the remote control.
Using the User guide
35
Using the User guide
User Guide allows you to more easily access the
detailed TV information.
1 Press
HOME button to access the HOME
1
User Guide
OPTION > To set language
HOME  Settings  OPTION  Language
menu.
Selects Menu Language and Audio Language displayed on the screen.
2 Select User Guide and press the
Wheel (OK).
CHANNEL Setting
PICTURE, SOUND Setting
Menu
Language
Selects a screen menu language.
Audio
Language
[In Digital Mode Only]
Selects the desired language when watching digital
broadcasting containing several audio languages.
Voice Search
Language
OPTION
Select the language to make voice search.
✎ Only the voice search adopted model can support this
setting.
LG SMART Function
Advabced Function
Information
Try Now
Zoom In
2
Close
3

HOME  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu
Language
Selects a screen menu language.
[In Digital Mode Only]
Selects the desired language when watching digital
broadcasting containing several audio languages.
Voice Search Select the language to make voice search.
✎O
nly the voice search adopted model can support this
Language
setting.
Audio
Language
User Guide
4
Try Now
Zoom Out
Close
3
To use input device
To use Energy Saving feature
CHANNEL Setting
To set time options
PICTURE, SOUND Setting
To set TV lock options
OPTION
To set language
LG SMART Function
Disabled Assistance
Advabced Function
To set Magic Remote Control
Information
2
1
2
3
Shows the current channel.
Allows to select the category you want.
3
Allows to select the item you want.
You can use
/
button to move between
pages.
4
Allows to browse the description of the
function you want from the index.
1
Shows the description of the selected menu.
You can use
/
to move between pages.
2
Moves to the selected menu directly from the
User Guide.
3
Zooms in or out the screen.
ENGLISH
1
User Guide
36
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
USA, Canada, Mexico: AC 120 V ~ 50 / 60 Hz
Other Country: AC 100 - 240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
75 Ω
Environment
condition
Operating
Temperature
0 - 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 - 60 °C
Storage Humidity
Less than 85 %
32LM6200
(32LM6200-UE)
MODELS
Dimensions
(Width x Height x
Depth)
ENGLISH
Weight
With stand
746.0 x 528.0 x 225.0 mm
(29.3 x 20.7 x 8.8 inch)
Without stand
746.0 x 462.0 x 35.5 mm
(29.3 x 18.1 x 1.3 inch)
With stand
10.0 kg (22.0 lbs)
Without stand
8.5 kg (18.7 lbs)
Current Value / Power consumption
0.8 A / 80 W
47LM6200
(47LM6200-UE)
MODELS
42LM6200
(42LM6200-UE)
47LM6210
(47LM6210-UD)
47LM6250
(47LM6250-UD)
Dimensions
(Width x Height x
Depth)
Weight
With stand
979.0 x 670.0 x 263.0 mm
(38.5 x 26.3 x 10.3 inch)
1089.0 x 730.0 x 263.0 mm
(42.8 x 28.7 x 10.3 inch)
Without stand
979.0 x 594.0 x 35.5 mm
(38.5 x 23.3 x 1.3 inch)
1089.0 x 655.0 x 35.5 mm
(42.8 x 25.7 x 1.3 inch)
With stand
15.3 kg (33.7 lbs)
17.8 kg (39.2 lbs)
Without stand
13.1 kg (28.8 lbs)
15.6 kg (34.3 lbs)
1.0 A / 100 W
1.2 A / 120 W
Current Value / Power consumption
SPECIFICATIONS
37
55LM6200
(55LM6200-UE)
55LM6210
(55LM6210-UD)
MODELS
55LM6250
(55LM6250-UD)
Dimensions
(Width x Height x
Depth)
Weight
With stand
1263.0 x 830.0 x 331.0 mm
(49.7 x 32.6 x 13.0 inch)
Without stand
1263.0 x 754.0 x 35.5 mm
(49.7 x 29.6 x 1.3 inch)
With stand
25.3 kg (55.7 lbs)
Without stand
21.9 kg (48.2 lbs)
Current Value / Power consumption
55LM6400
(55LM6400-UA)
With stand
1073.0 x 705.0 x 263.0 mm
(42.2 x 27.7 x 10.3 inch)
1243.2 x 799.5 x 331.0 mm
(48.9 x 31.4 x 13.0 inch)
Without stand
1073.0 x 639.0 x 35.7 mm
(42.2 x 25.1 x 1.4 inch)
1243.2 x 735.0 x 35.5 mm
(48.9 x 28.9 x 1.3 inch)
Weight
With stand
16.9 kg (37.2 lbs)
24.7 kg (54.4 lbs)
Without stand
14.7 kg (32.4 lbs)
21.0 kg (46.2 lbs)
1.1 A / 110 W
1.2 A / 120 W
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
Weight
60LM6450
(60LM6450-UA)
With stand
1391.0 x 889.0 x 315.0 mm
(54.7 x 35.0 x 12.4 inch)
Without stand
1391.0 x 821.0 x 43.2 mm
(54.7 x 32.3 x 1.7 inch)
With stand
32.0 kg (70.5 lbs)
Without stand
28.2 kg (46.9 lbs)
Current Value / Power consumption
1.6 A / 160 W
ENGLISH
47LM6400
(47LM6400-UA)
MODELS
Dimensions
(Width x Height x
Depth)
1.5 A / 150 W
38
SPECIFICATIONS
42LM6700
(42LM6700-UA)
47LM6700
(47LM6700-UA)
With stand
953.0 x 636.0 x 263.0 mm
(37.5 x 25.0 x 10.3 inch)
1063.0 x 701.0 x 263.0 mm
(41.8 x 27.5 x 10.3 inch)
Without stand
953.0 x 566.0 x 33.4 mm
(37.5 x 22.2 x 1.3 inch)
1063.0 x 628.0 x 33.4 mm
(41.8 x 24.7 x 1.3 inch)
With stand
14.8 kg (32.6 lbs)
17.5 kg (38.5 lbs)
Without stand
12.6 kg (27.7 lbs)
15.3 kg (33.7 lbs)
1.0 A / 100 W
1.1 A / 110 W
MODELS
Dimensions
(Width x Height x
Depth)
Weight
Current Value / Power consumption
55LM6700
(55LM6700-UA)
MODELS
Dimensions
(Width x Height x
Depth)
Weight
With stand
1232.0 x 795.0 x 331.0 mm
(48.5 x 31.2 x 13.0 inch)
Without stand
1232.0 x 723.0 x 33.6 mm
(48.5 x 28.4 x 1.3 inch)
With stand
25.0 kg (55.1 lbs)
Without stand
21.3 kg (46.9 lbs)
ENGLISH
Current Value / Power consumption
47LM7600
(47LM7600-UA)
55LM7600
(55LM7600-UA)
With stand
1063.0 x 701.0 x 263.0 mm
(41.8 x 27.5 x 10.3 inch)
1232.0 x 795.0 x 331.0 mm
(48.5 x 31.2 x 13.0 inch)
Without stand
1063.0 x 628.0 x 33.4 mm
(41.8 x 24.7 x 1.3 inch)
1232.0 x 723.0 x 33.6 mm
(48.5 x 28.4 x 1.3 inch)
With stand
17.5 kg (38.5 lbs)
25.0 kg (55.1 lbs)
Without stand
15.3 kg (33.7 lbs)
21.3 kg (46.9 lbs)
1.3 A / 130 W
1.6 A / 160 W
MODELS
Dimensions
(Width x Height x
Depth)
Weight
1.2 A / 120 W
Current Value / Power consumption
SPECIFICATIONS
39
3D supported mode
Video, which is input as below media contents is switched into the 3D screen automatically.
yy
The method for 3D digital broadcast may differ depending on the signal environment. If video is not
yy
switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640 X 480
Horizontal
Frequency (kHz)
576p
59.94 / 60
Top & Bottom,
Side by Side(Half), Side by Side(Full)
62.938 / 63
Frame Packing, Line Alternative
31.25
50
1080i
1080p
Frame Packing, Line Alternative
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo)
Signal
Playable 3D video format
Frame Compatible
Side by Side(Half), Top & Bottom
ENGLISH
HDMI
Frame Packing, Line Alternative
31.469 / 31.5
62.5
720p
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
31.469 / 31.5
62.938 / 63
480p
Vertical
Frequency (Hz)
40
SPECIFICATIONS
For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.
yy
3D supported mode manually
Input
Signal
720p
1080i
HDMI-DTV
1080p
HDMI-PC
ENGLISH
RGB-PC
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
37.50
50
45.00
60
28.12
50
33.75
60
27.00
24
28.12
25
33.75
30
56.25
50
67.50
60
1024x768
48.36
1360x768
47.71
1920x1080
67.50
Others
-
1024x768
48.36
1360x768
47.71
1920x1080
67.50
Others
720p
1080i
Component
1080p
Playable 3D video format
2D to 3D, Side by Side(Half), Top & Bottom,
Single Frame Sequential
2D to 3D, Side by Side(Half), Top & Bottom
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board, Single Frame Sequential, Row
Interleaving, Column Interleaving
2D to 3D, Side by Side(Half), Top & Bottom
60
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board, Single Frame Sequential, Row
Interleaving, Column Interleaving
-
2D to 3D
60
2D to 3D, Side by Side(Half), Top & Bottom
-
-
2D to 3D
37.50
50
45.00
60
28.12
50
33.75
60
27.00
24
28.12
25
33.75
30
56.25
50
2D to 3D, Side by Side(Half), Top & Bottom
67.50
60
Others
-
-
2D to 3D
USB
1080p
33.75
30
DLNA
1080p
33.75
30
2D to 3D, Side by Side(Half),Top & Bottom,
Checker Board, Row Interleaving, Column
Interleaving(Photo : Side by Side(Half),
Top & Bottom)
DTV
Signal
Playable 3D video format
HD
2D to 3D, Side by Side(Half), Top & Bottom
SD
2D to 3D
SPECIFICATIONS
HDMI/DVI-DTV supported mode
Wireless LAN module(WN8122E) specification
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
720X480
31.469
31.5
59.94
60
720X576
31.25
50
Resolution
1280X720
37.5
44.96
45
50
59.94
60
1920X1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
PB
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Modulation
CCK / OFDM / MIMO
Output Power
(Typical)
802.11a: 14 dBm
802.11b: 17 dBm
802.11g: 15 dBm
802.11n - 2.4GHz: 13.5 dBm
802.11n - 5GHz: 12 dBm
Data rate
802.11a/g: 54 Mbps
802.11b: 11 Mbps
802.11n: 300 Mbps
Antenna Gain
(Typical)
2400 to 2483.5 MHz: -0.79 dBi
5150 to 5250 MHz: 0.62 dBi
5725 to 5850 MHz: 0.52 dBi
Occupied bandwidth
802.11a/b/g: HT20
802.11n: HT20/40
PR
Y
Signal
IEEE802.11a/b/g/n
ENGLISH
Video output ports
on DVD player
Y
Standard
Because band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
Component port connecting information
Component ports on the
TV
41
Bluetooth module (BM-LDS302) specification
Standard
Bluetooth Version 3.0
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.) 10 dBm or lower
Data rate (Max.)
3 Mbps
Communication
Line of Open Sight approx. 10 m
Distance
42
MAINTENANCE & TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
yy
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
ENGLISH
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
yy
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
yy
lubricants, as these may damage the screen’s finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
yy
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to
yyCheck if the batteries are still working and properly installed ( to ,
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings.
yyIf there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
).
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising