LG | 47lx9500 | LG 47LX9500 Owner’s Manual

OWNER’S MANUAL
LED LCD TV / PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
(For LED LCD TV)
This product qualifies for ENERGY STAR in the
“factory default (Home Use)” setting.
Changing the factory default settings or enabling other
features may increase power consumption that could
exceed the limits necessary to quality for ENERGY STAR.
LED LCD TV MODELS
47LX9500
55LX9500
47LEX8
55LEX8
60LEX9
72LEX9
P/NO : MFL62882734 (1008-REV00)
PLASMA TV MODELS
50PK950
60PK950
50PX950
60PX950
www.lg.com
WARNING / CAUTION
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
2
SAFETY INSTRUCTIONs
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
9
Heed all warnings.
Follow all instructions.
1
Do not use this apparatus
near water.
2
Clean only with dry cloth.
3
Do not block any ventilation
openings. Install in accordance
with
the
manufacturer’s
instructions.
4
Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
5
Protect the power cord from
being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the
apparatus.
6
Only use attachments/accessories specified by the manufacturer.
7
Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.
8
Unplug this apparatus during
lighting storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
10
Never touch this apparatus or antenna during a thunder or lighting storm.
11
When mounting a TV on the wall, make sure
not to install the TV by the hanging power
and signal cables on the back of the TV.
12
Do not allow an impact shock or any objects
to fall into the product, and do not drop
onto the screen with something.
13
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or
damaged or cracked wire insulation are
dangerous . Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized
servicer. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where the
cord exits the appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug
when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
3
SAFETY INSTRUCTIONs
14
15
16
WARNING - To reduce the risk
of fire or electrical shock, do not
expose this product to rain,
moisture or other liquids. Do
not touch the TV with wet
hands. Do not install this product near flammable objects
such as gasoline or candles or
expose the TV to direct air
conditioning.
Do not expose to dripping or
splashing and do not place
objects filled with liquids, such
as vases, cups, etc. on or over
the apparatus (e.g. on shelves
above the unit).
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV with
a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If
grounding methods are not possible, have a
qualified electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
4
17
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
18
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
19
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may
occur. Do not clean with chemicals such as
alcohol, thinners or benzene.
20
Moving
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press against or put
stress on the front panel of the TV.
21
Ventilation
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
22
Take care not to touch the ventilation openings. When watching the TV for a long
period, the ventilation openings may
become hot.
23
If you smell smoke or other odors coming
from the TV, unplug the power cord contact
and authorized service center.
24
Do not press strongly upon the
panel with hand or sharp object
such as nail, pencil or pen, or
make a scratch on it.
25
Keep the product away from direct sunlight.
26
Dot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to
six million pixels. In a very few cases, you
could see fine dots on the screen while
you’reviewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
27
Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal deformation
is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies
depending on the product.
This generated sound does not affect the
performance and reliability of the product.
28
For LED LCD TV/LCD TV
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor’s performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
31
Viewing 3D Imaging (For 3D TV)
►When viewing 3D imaging, watch the
TV from an effective viewing angle and
within the appropriate distance. If you exceed this viewing angle or distance, you
may not be able to view the 3D imaging.
Furthermore, the 3D imaging may not
display if it is viewed while you are lying
down.
►If you watch the 3D imaging too closely
or for a long period of time, it may harm
your eyesight.
►Watching the TV or playing video games
that incorporate 3D imaging with the
3D glasses for a long period of time can
cause drowsiness, headaches or fatigue
to you and/or your eyes. If you have a
headache, or otherwise feel fatigued or
drowsy, stop watching the TV and take a
rest.
►Pregnant woman, seniors, persons with
heart problems or persons who experience frequent drowsiness should refrain
from watching 3D TV.
►Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.
► Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
►Warning for photosensitization seizure:
Some viewers may experience a seizure
or epilepsy when exposed to certain factors, including flashing lights or images
in TV or video games. If you or anybody
from your family has a history of epilepsy
or seizure, please consult with your doctor before watching 3D TV.
5
SAFETY INSTRUCTIONs
Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the
following symptoms, immediately stop
watching the 3D imaging and consult a
doctor: dizziness or lightheadedness, visual transition or altered vision, visual or
facial instability, such as eye or muscle
twitching, unconscious action, convulsion,
loss of conscience, confusion or disorientation, loss of directional sense, cramps,
or nausea. Parents should monitor their
children, including teenagers, for these
symptoms as they may be more sensitive
to the effects of watching 3D TV.
Risk of photosensitization seizure can be
reduced with the following actions.
- Take frequent breaks from watching 3D
TV.
-F
or those who have vision that is different in each eye, they should watch the
TV after taking vision correction measures.
- Watch the TV so that your eyes are on
the same level as the 3D screen and
refrain from sitting too closely to the TV
-D
o not watch the 3D imaging when
tired or sick, and avoid watching the 3D
imaging for a long period of time.
-D
o not wear the 3D glasses for any other purpose than viewing 3D imaging on
a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness of your situation before moving.
6
On Disposal
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not
dispose of this product with general household waste. Disposal of this product must be
carried out in accordance to the regulations of
your local authority.
contents
WARNING / CAUTION............................2
SAFETY INSTRUCTIONs........................3
contents.......................................................7
feature of this tv...............................9
preparation
Accessories............................................................10
Optional Extras...................................................... 11
Front Panel Information..................................... 12
Back Panel Information......................................15
Stand Instructions.......................................................18
VESA Wall Mounting.........................................22
Cable Management...........................................24
Desktop Pedestal Installation..........................26
Swivel Stand.........................................................26
Kensington Security System...........................26
Securing the TV to the wall to prevent falling
when the tv is used on a stand...................... 27
Antenna or Cable Connection........................28
external equipment setup
HD Receiver Setup.............................................29
DVD SETUP..........................................................33
VCR SETUP..........................................................36
Other A/V Source Setup..................................38
USB Connection.................................................38
Headphone Setup.....................................................39
Audio Out Connection......................................40
External Equipment WIreless Connection
(Optional Extras)................................................... 41
PC Setup...............................................................42
Network Setup..................................................... 47
watching tv / channel control
Remote Control Functions...............................55
Magic Motion Remote Control Functions...58
Turning on the TV................................................ 61
Channel Selection............................................... 61
Volume Adjustment............................................ 61
Initial Setting........................................................62
On-Screen Menus Selection...........................64
Quick Menu..........................................................66
Home Menu......................................................... 67
Customer Support
- Software Update..............................................68
- Picture Test/Sound Test................................. 69
- Product/Service Info....................................... 70
- Network Test....................................................... 71
Simple Manual..................................................... 72
Channel Setup
- Auto Scan (Auto Tuning)............................... 73
- Add/Delete Channel (Manual Tuning)...... 74
- Channel Editing................................................ 75
Channel List......................................................... 76
Favorite Channel Setup..................................... 77
Channel Information.......................................... 78
Channel Brief Information................................ 79
Input List.............................................................. 80
Input Label.............................................................81
Reset to Factory Default (Initial Setting)......82
Mode Setting.......................................................83
Demo Mode.........................................................84
AV Mode................................................................85
Game/Schedule..................................................86
SIMPLINK..............................................................90
3D VIDEO
3D Video................................................................92
Watching 3D Video............................................94
MY MEDIA
Entry Mode...........................................................96
Connection Method........................................... 97
Movie list.............................................................. 102
Photo list.............................................................. 109
Music list............................................................... 115
DivX Registration Code................................... 120
Deactivation......................................................... 121
Network
Legal Notice....................................................... 122
7
Netcast
Netcast Menu..................................................... 123
YOUTUBE............................................................ 124
PICASA................................................................ 126
picture CONTROL
Picture Size (Aspect Ratio) Control............. 128
Picture Wizard.................................................... 130
ꕊ Energy Saving............................................. 132
Preset Picture Settings (Picture Mode)...... 133
Manual Picture Adjustment - User Mode.134
Picture Improvement Technology (Advanced
Control)................................................................ 135
Expert Picture control...................................... 136
Picture Reset...................................................... 139
TruMotion ......................................................... 140
LED Local Dimming .........................................141
Power Indicator ................................................ 142
Image Sticking Minimization (ISM) Method . 143
SOUND & LANGUAGE CONTROL
Auto Volume....................................................... 144
Clear Voice II...................................................... 145
Balance................................................................ 146
Preset Sound Settings (Sound Mode)........147
Sound Setting Adjustment - User Mode.. 148
Audio Reset........................................................ 149
TV Speakers On/Off Setup........................... 150
Stereo/SAP Broadcast Setup........................ 151
Audio Language .............................................. 152
On-screen Menus Language Selection..... 153
Caption Mode
- Analog Broadcasting System Captions.. 154
- Digital Broadcasting System Captions.... 155
- Caption Option............................................... 156
8
TIME SETTING
Clock Setting
- Auto Clock Setup...........................................157
- Manual Clock Setup..................................... 158
Auto On/Off Time Setting............................. 159
Sleep Timer Setting......................................... 160
PARENTAL CONTROL / RATINGS
Set Password & Lock System
- Setting up Your Password.............................161
- Set Password.................................................. 162
Lock System....................................................... 163
Channel Blocking.............................................. 164
Movie & TV Rating........................................... 165
Downloadable Rating........................................170
External Input Blocking.....................................171
Key Lock...............................................................172
Appendix
Troubleshooting..................................................173
Maintenance........................................................176
Product Specifications.....................................177
IR Codes..............................................................180
External Control Through RS-232C........... 182
Open Source Software Notice...................... 188
feature of this tv
ꔛ
Some of these features are not available on all models.
High-definition
television.
Highresolution digital television broadcast
and playback system composed of
roughly a million or more pixels, 16:9
aspect-ratio screens, and AC3 digital
audio. A subset of digital television,
HDTV formats include 1080p, 1080i,
and 720p resolutions.
Manufactured under license from Dolby
Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that
plays DivX video. Visit www.divx.com for
more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Videoon-Demand (VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup
menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
“DivX Certified to play DivX video up to
HD 1080p, including premium content”
This TV contains the detailed calibrations necessary for professional certification by the Imaging Science
Foundation. The resulting ISF “day” and
“night” modes will then be accessible
by the user to experience the best their
LG HDTV has to offer.
Sophisticated and detailed calibrations
can be made through the ISFccc mode.
Detailed calibration requires a licensed
technician.
Please contact your local dealer to
inquire about an ISF certified technician.
THX (Thomlinson Holman’s Experiment)
is an audio and video certification standard established by George Lucas and
Thomlinson. A THX certified display
guarantees screen quality that exceeds
the display standard specification in
both hardware and software.
View videos and photos and listen to
music on your TV through USB 2.0
(‘videos’ dependent on model).
Displays HDTV programs in full 1920 x
1080p resolution for a more detailed
picture.
“Pat. 7,295,673; 7,460,668;7,515,710;7,519,274”
IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN
ꔛ
ꔛ
ꔛ
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
9
preparation
preparation
Accessories
preparation
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
1.5V 1.5V
1,5Vcc 1,5Vcc
1.5V 1.5V
Owner’s Manual
Nero MediaHome 4
Essentials CD
Not included with all models
Remote Control,
Batteries (AAA)
Polishing Cloth
1.5V 1.5V
Motion Remote Control,
Strap,
Batteries
(AA)
1.5V 1.5V
Option Extras
* Wipe spots on the exterior only with the
polishing cloth.
* Do not wipe roughly when removing
stains. Excessive pressure may cause
scratches or discoloration.
1,5Vcc 1,5Vcc
D-sub 15 pin Cable
When using the VGA (D-sub 15
pin cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain standards compliance.
Not included with all models
Ferrite Core
(Black)
Ferrite Core
(White)
10
Ferrite core can be used to reduce the electromagnetic
waves that may interfere with the TV. Install the Ferrite
core on the power cable close to the wall plug.
Ferrite core can be used to reduce the electromagnetic
wave when connecting the LAN cable. Place the ferrite
core far from TV and wind the LAN cable in the ferrite
core once.
Close to the wall plug.
1,5Vcc 1,5Vcc
x4
x4
(M4 x 12)
(M4 x 22)
Screws for stand assembly
(Refer to P.20)
x2
Cable Holder
(Refer to p.25)
Component gender cable,
AV gender cable
Stand Rear Cover
preparation
47/55LX9500, 47/55LEX8, 60/72LEX9
(For 47/55LX9500)
x2
3D Glasses
Plasma TV
(For 50PK950, 50PX950)
1.5V 1.5V
x4
1,5Vcc
x4
1,5Vcc
(M4 x 14) (M4 x 28)
Screws for stand assembly
(Refer to P.18)
x2
Cable Holder
(Refer to P.24)
Power Cord
(For 50/60PX950)
Wireless LAN for
Broadband/DLNA Adaptor
Cleansing Cloths
(mitt)
Cable
Protection Cover
Management Clip
(Refer to P.19)
(Refer to P.24)
(For 50/60PX950)
3D Glasses
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with compatible LG LED LCD TV and Plasma TV.
Wireless Media Box
(AN-WL100W)
Wireless LAN for Broadband/
DLNA Adaptor
(AN-WF100)
11
preparation
Front Panel Information
preparation
ꔛ
Image shown may differ from your TV.
50/60PK950, 50/60PX950
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
Remote Control Sensor
Speaker
VOL
ENTER
MENU
Emitter
(For
50/60PX950)
It is the part equipped with
the emitter exchanging signal with 3D glasses.
careful not to
ENTER
MENUPlease be
block the screen with
objects or people while
watching a 3D Video.
INPUT
INPUT
CH
Power/Standby Indicator
Illuminates red in standby mode.
The lighting is off while the TV remains on.
VOL
CH
Touch Button
You can operate the button just by touching the button lightly with your finger.
INPUT
MENU
ENTER
power INPUT MENU ENTER
Button Button Button Button
12
VOL
VOLUME
(+, -)
Buttons
CH
CHANNEL
(ꕌ,ꕍ)
Buttons
preparation
47/55LX9500
Speaker
Emitter
It is the part equipped with
the emitter exchanging signal with 3D glasses.
Please be careful not to
block the screen with objects
or people while watching a
3D Video.
CH
CHANNEL (ꕍ,ꕌ)
Buttons
VOL
VOLUME (-, +)
Buttons
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
power Button
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.►p.142)
13
preparation
preparation
ꔛ
Image shown may differ from your TV.
47/55LEX8, 60/72LEX9
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
(Can be adjusted using the Power Indicator in
the OPTION menu.►p.142)
Speaker
Emitter
CH
VOL
ENTER
MENU
INPUT
Touch Button
You can operate the button just by touching the button lightly with your finger.
CH
VOL
14
VOL
ENTER
CHANNEL VOLUME
(-, +)
(ꕍ,ꕌ)
Buttons
Buttons
ENTER
MENU
INPUT
MENU
INPUT
ENTER MENU INPUT power
Button Button Button Button
USB IN 2
VIDEO L(MONO) AUDIO R
RS-232C IN
(CONTROL & SERVICE)
DVI IN 4
AV IN 2
AV IN 2
or
3
/DVI IN
2
1
/DVI IN
REMOTE CONTROL IN
(SERVICE ONLY)
Y
PR
PB
L
VIDEO L(MONO) AUDIO R
ANTENNA
/CABLE
IN
R
1
AUDIO
VIDEO
6
2
Y
L
PR
PB
1
AUDIO
VIDEO
13
AV IN 2
ANTENNA
/CABLE
IN
R
6
8
7
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
LAN
AUDIO IN
(RGB/DVI)
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
3
2
1
REMOTE CONTROL IN
/DVI IN
AV IN 1
1
COMPONENT IN
REMOTE CONTROL IN
RS-232C IN
2
COMPONENT IN
LAN
1
2
R
VIDEO L(MONO) AUDIO R
OPTICAL
VIDEO L(MONO) AUDIO
DIGITAL
AUDIO OUT
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
2
WIRELESS
CONTROL
4
AV IN 1
3
5
AV IN 1
3
COMPONENT IN
LAN
2
10
DVI IN 4
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
WIRELESS
CONTROL
SERVICE ONLY
USB IN 2
12
USB IN 1
DVI IN 4
50/60PK950, 50/60PX950
VIDEO L(MONO) AUDIO R
USB IN 1
USB IN 1
Image shown may differ from your TV.
9
preparation
ꔛ
USB IN 2
Back Panel Information
2
Y
PB
PR
L
R
1
VIDEO
ANTENNA
/CABLE
IN
AUDIO
15
preparation
12
USB IN 2
preparation
47/55LX9500, 47/55LEX8, 60/72LEX9
LAN
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
8
/DVI IN
LAN
3
5
VIDEO L(MONO) AUDIO R
2
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
RGB IN (PC)
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
!
6
11
ANTENNA/
CABLE IN
?
LAN
AUDIO IN
ꔡ
WIRELESS
CONTROL
1
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
2
ANTENNA/
CABLE IN
For HDMI IN 4 and USB IN 1, 2
►For an optimal connection,
HDMI cables and USB
devices should have bezels
less than 10 mm (0.39
inches) thick.
*A
16
LAN
ꔡ
CAUTION
7
(RGB/DVI) OPTICAL DIGITAL
2
(SERVICE ONLY)
8
3
?
6
RS-232C IN
/DVI IN
9
!
ꔡ
WIRELESS
CONTROL
AV IN2
VIDEO / AUDIO
4
COMPONENT IN3
AUDIO / Y PB PR
3
H/P
2
IN 4
1
USB IN 1
10
10 mm (0.39 inches)
WIRELESS
CONTROL
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesn’t
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
2
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
0.32 cm (1/8 inch) headphone jack for analog
PC audio input.
Connect over-the-air or cable signals to this
jack.
preparation
LAN
Network connection for Netflix, Yahoo! TV
Widgets, etc (for USA).
Also used for video, photo and music files on
a local network.
1
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
8
WIRELESS CONTROL
Connect the Wireless Ready Dongle to the TV
to control the external input devices connected to Media Box wirelessly.
9
3
RS-232C IN (CONTROL & SERVICE) or
SERVICE ONLY
Used by third party devices.
This port is used for service or Hotel mode.
4
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesn’t work.
10 USB
INPUT
Used for viewing photos, watching movies
and listening to MP3s.
11 HEADPHONE
0.32 cm (1/8 inch) headphone jack
Impedance 16 Ω , Maximum audio out 15 mW
12 Power
5
Cord or Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.
13 REMOTE
CONTROL IN
For a wired remote control.
AV (Audio/Video) IN
Analog composite connection.
Supports standard definition video only (480i).
6
7
ANTENNA/CABLE IN
17
preparation
Stand Instructions (For 50/60PK950, 50/60PX950)
preparation
ꔛ
Image shown may differ from your TV.
Installation
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
STAND BODY
M4 x 14
STAND BASE
50PK950, 50PX950
(provided as parts of the product)
3
18
Assemble the parts of the Cable
Management Clip with the Stand
Body.
4
Assemble the TV as shown.
5
Install the 4 screws into the holes shown.
!
! NOTE
?
►When assembling the desk type stand,
make sure the screws are fully tightened (If
? not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
Cable
Management
Clip
M4 x 28
STAND BODY
preparation
detachment
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
50PK950, 50PX950
2
Remove the screws that
hold the stand on.
M4 x 28
3
60PK950, 60PX950
M4 x 30
Detach the stand from TV.
Protection cover
After removing the stand, install the included
protection cover over the hole for the
stand.
Press the Protection cover into the TV until
you hear it click.
When installing the wall mounting bracket, use
the Protection cover.
PROTECTION COVER
Fix a guide to the outside.
19
preparation
Stand instructions (For 47/55LX9500, 47/55LEX8)
preparation
ꔛ
Image shown may differ from your TV.
Installation
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND
BODY with the STAND BASE of the
TV.
At this time, tighten the screws that
hold the STAND BODY on.
STAND BODY
M4 x 22
STAND BASE
3
Install the 4 screws into the holes shown.
M4 x 12
4
20
Assemble the part of the STAND
REAR COVER with the TV.
!
! NOTE
?
►When assembling the desk type stand,
make sure the screws are fully tightened (If
? not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
STAND REAR
COVER
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Detach the STAND REAR COVER from TV.
3
Remove the screws that hold the stand on.
4
Detach the stand from TV.
preparation
detachment
21
preparation
VESA Wall Mounting
preparation
Install your wall mount onto wooden studs perpendicular to the floor. When attaching to other building
materials, please contact a professional.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
VESA (A * B)
A
Standard
Screw
Quantity
Wall Mounting Bracket
(sold separately)
47LX9500,
47LEX8
200 * 200
M6
4
LSW200B, LSW200BG,
LSW200BX, LSW200BXG
55LX9500,
55LEX8
400 * 400
M6
4
LSW400B, LSW400BG,
DSW400BG
50PK950,
50PX950
400 * 400
M6
4
PSW400B, PSW400BG
60PK950,
60PX950
600 * 400
M8
4
PSW600B, PSW600BG
Model
22
B
preparation
!
?
!
?
! NOTE
►Screw length needed depends on the wall
mount used. For further information, refer to
? the instructions included with the mount.
►Standard dimensions for wall mount kits are
shown in the table.
►When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
►Do not use screws longer than the standard
dimension, as they may cause damage to the
inside to the TV.
►For wall mounts that do not comply with the
VESA standard screw specifications, the length
! of the screws may differ depending on their
specifications.
►Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
►LG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
?
CAUTION
►Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
23
preparation
Cable Management
preparation
ꔛ
Image shown may differ from your TV.
Plasma TV
How to use the cable holder
1
After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the
cables.
In case of the LAN cable, install as shown to reduce the electromagnetic wave.
CABLE HOLDER
How to use the cable management clip
1
Connect the cables as necessary.
To connect additional equipment, see the
External equipment setup section.
2
Install the Cable Management Clip
into the TV until clicking sound.
H
OW TO REMOVE THE CABLE
MANAGEMENT CLIP
►Hold the Cable Management Clip with
both hands and pull it backward as shown.
24
Image shown may differ from your TV.
preparation
ꔛ
47/55LX9500, 47/55LEX8, 60/72LEX9
1
Secure the power cord with the CABLE
HOLDER on the TV back cover.
It will help prevent the power cable from
being removed by accident.
CABLE HOLDER
2
After connecting the cables as necessary,
install the CABLE HOLDER as shown
and bundle the cables.
CABLE HOLDER
25
preparation
Desktop Pedestal Installation
preparation
ꔛ
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
10.1 cm (4 inch)
!
!
?
?
10.1 cm (4 inch)
10.1 cm (4 inch)
CAUTION
►Ensure adequate ventilation by following the clearance recommendations.
►Do not mount near or above any type of heat source.
Swivel Stand
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit
your viewing position.
Kensington Security System
ꔛ
This feature is not available for all models.
-T
he TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
26
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
ꔛ Image shown may differ from your TV.
ꔛ
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
ꔛ
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
ꔛ
!
?
preparation
Securing the TV to the wall to prevent falling
when the tv is used on a stand
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
! NOTE
►Use a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
►
? To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
27
USB IN
IN 4
AC IN
CABLE MANAGEMENT
USB IN 1
AV IN 2
1. Antenna (Analog or Digital)
RS-232C IN
LAN
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
ꔡ
(Connect to wall antenna
socket)
WIRELESS
1
RGB/DVI OPTICAL DIGITAL
VIDEO L(MONO) AUDIO R
AUDIO IN AUDIO OUT
AC IN
2
/DVI IN
Y
CONTROL
CABLE MANAGEMENT
PB
PR
R
L
1
AUDIO
VIDEO
AV IN 1 COMPONENT IN
2
IN 4
(SERVICE ONLY)
IN (PC)
Wall Antenna Socket or Outdoor Antenna without a Cable RGB
Box
Connections.
For optimum picture quality, adjust antenna direction if3 needed.
ANTENNA/
CABLE IN
VIDEO L/MONO AUDIO R H/P
preparation
Antenna or Cable Connection
USB INVIDEO
2
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
ꔛ Image shown may differ from your TV.
ꔛ
L/MONO AUDIO R
H/P
preparation
AV IN 2
Outdoor
Antenna
(VHF, UHF)
RF Coaxial Wire (75 Ω)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
2. Cable
WIRELESS
CONTROL
1
(SERVICE ONLY)
RGB/DVI OPTICAL DIGITAL
VIDEO L(MONO) AUDIO R
AUDIO IN AUDIO OUT
2
/DVI IN
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
2
RS-232C IN
Be careful not to bend the copper wire
when connecting the antenna.
3
LAN
ꔡ
Copper Wire
RGB IN (PC)
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 Ω)
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
ꔛ For much more information about antennas visit our Knowledgebase at http://lgknowledgebase.
com. Search for antenna.
ꔛ
28
external equipment setup
ꔛ
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
ꔛ
Image shown may differ from your TV.
HD Receiver Setup
Component Connection
1. How to connect
Y
1
Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT IN
VIDEO 1, 2, or 3* jacks on the TV. Match the
jack colors (Y = green, PB = blue, and PR = red).
2
Connect the audio output of the digital set-top
box to the COMPONENT IN AUDIO 1, 2, or 3*
jacks on the TV.
L
R
2
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
/DVI IN
3
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
2
ꔛ
1
2
WIRELESS
CONTROL
Y
PB
PR
L
R
1
AUDIO
VIDEO
COMPONENT IN
ꔡ
VIDEO L(MONO) AUDIO R
AV IN 1
2. How to use
* Component3: For LED LCD TV
PR
1
LAN
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box operation.)
ꔛ Select the Component1, Component2, or
Component3 input source on the TV using the
INPUT button on the remote control.
PB
external equipment setup
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
Y, CB/PB, CR/PR
Resolution
LAN
ꔡ
WIRELESS
720x480p
CONTROL
1920x1080i
1920x1080p
Vertical
Frequency(Hz)
3
15.73
(RGB/DVI) OPTICAL DIGITAL
2
15.73
AUDIO IN
59.94
VIDEO L(MONO) AUDIO R
60.00
AUDIO OUT
31.47
2
59.94
1
31.50
Y
PB
1
1280x720p
RS-232C IN
(CONTROL&SERVICE)
44.96
AV IN 1 COMPONENT IN
720x480i
RGB IN (PC)
Horizontal
(KHz)
/DVI IN
Frequency
VIDEO
PR
R
60.00
L
59.94
AUDIO
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
HDMI OUTPUT
RGB IN (PC)
RS-232C IN
29
(CONTROL&SERVICE)
/DVI IN
LAN
3
VIDEO L(MONO) AUDIO R
AV
(RGB/DVI) OPTICAL DIGITAL
ANT IN
ANT OUT
S-VIDEO VIDEO
OUTPUT
SWITCH
IN 4
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
USB IN 2
R
L
AUDIO
R
L
PR
AV IN2
VIDEO / AUDIO
H/P
COMPONENT IN3
AUDIO / Y PB PR
AV IN2
VIDEO / AUDIO
H/P
USB IN 1
USB IN 2
external equipment setup
30
IN 4
external equipment setup
For LED LCD TV
1
2
PB
Y
/DVI IN
LAN
3
OPTICAL
DIGITAL
AUDIO IN
AUDIO OUT
1
COMPONENT IN
ꔡ
VIDEO L(MONO) AUDIO R
2
WIRELESS
CONTROL
Y
PB
PR
L
AV IN 1
(RGB/DVI)
2
R
1
VIDEO
AUDIO
RGB IN (PC)
(CONTROL&SERVICE)
HDMI Connection
1
2
RS-232C IN
/DVI IN
LAN
Connect the digital set-top box to HDMI/DVI IN
1, 2, 3, or 4 jack on the TV.
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔡ
No separate audio connection is necessary.
HDMI supports both audio and video.
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
1
2. How to use
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
ꔛ Select the HDMI1, HDMI2, HDMI3, or HDMI4 input
source on the TV using the INPUT button on the
remote control.
ꔛ ! NOTE
?
►If an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
? use the latest cables that support High Speed HDMI.
►HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1
KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)
HDMI OUTPUT
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
/DVI IN
LAN
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
HDMI-DTV
Resolution
720x480p
1280x720p
1920x1080i
1920x1080p
VIDEO
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.50
60.00
DVI OUTPUT
L
AUDIO
AUDIO
AV IN 1 COMPONENT IN
!
external
equipment setup
AV IN 1 COMPONENT IN
1. How to connect
R
31
external equipment setup
HDMI OUTPUT
DVI to HDMI Connection
1
2
/DVI IN
LAN
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
AUDIO OUT
2
Y
PB
VIDEO
1
2. How to use
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital settop box.)
ꔛ Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
ꔛ 32
!
! NOTE
?
►A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio
? connection is necessary.
VIDEO L(MONO) AUDIO R
PR
L
R
1
Connect the digital set-top box audio output to
the AUDIO IN (RGB/DVI) jack on the TV.
* HDMI4: For Plasma TV
(CONTROL&SERVICE)
DVI OUTPUT
L
AUDIO
R
AUDIO
AV IN 1 COMPONENT IN
external equipment setup
1. How to connect
Connect the DVI output of the digital set-top
box to the HDMI/DVI IN 1, 2, 3, or 4* jack on
the TV.
RS-232C IN
RGB IN (PC)
DVD Setup
Component Connection
1
Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT IN VIDEO 1, 2, or 3*
jacks on the TV.
Match the jack colors (Y = green, PB = blue, and
PR = red).
2
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO 1, 2, or 3* jacks on the
TV.
Y
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
3
AUDIO IN
ꔡ
1
AUDIO OUT
COMPONENT IN
Turn on the DVD player, insert a DVD.
Select the Component1, Component2, or
Component3 input source on the TV using the
INPUT button on the remote control.
ꔛ Refer to the DVD player’s manual for operating
instructions.
ꔛ
VIDEO L(MONO) AUDIO R
2
WIRELESS
CONTROL
Y
PB
PR
L
AV IN 1
2
ꔛ
R
1
VIDEO
AUDIO
RGB IN (PC)
(CONTROL&SERVICE)
For LED LCD TV
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
USB IN 2
USB IN 1
VIDEO L(MONO) AUDIO R
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
AUDIO OUT
2
Y
PB
PR
1
1
L
R
AUDIO
VIDEO
2
HDMI OUTPUT
R
RGB IN (PC)
L
PR
PB
Y
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
AUDIO IN
1
WIRELESS
CONTROL
2
Y
PB
PR
L
R
COMPONEN
ꔡ
VIDEO L(MONO) AUDIO R
AUDIO OUT
AV IN 1
(RGB/DVI) OPTICAL DIGITAL
2
USB IN 2
PB
(RGB/DVI) OPTICAL DIGITAL
AV IN2
VIDEO / AUDIO
Y
COMPONENT IN3
AUDIO / Y PB PR
PR
3
2
H/P
PB
/DVI IN
LAN
AV IN 1 COMPONENT IN
To get better picture quality, connect a DVD player
to the component input ports as shown below.
RS-232C IN
IN 4
Component Input ports
Video output ports
on DVD player
R
2
(RGB/DVI) OPTICAL DIGITAL
Y
L
/DVI IN
LAN
* Component3: For LED LCD TV
PR
1
2. How to use
Component ports on
the TV
PB
external equipment setup
1. How to connect
33
IN
AUDIO
USB IN 2
VIDEO
USB IN 1
external equipment setup
/DVI IN
LAN
ANT IN
S-VIDEO VIDEO
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔡ
L
1
WIRELESS
CONTROL
R
AUDIO
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
VIDEO
Turn on the DVD player, insert a DVD. ANT OUT OUTPUT
SWITCH
ꔛ Select the AV1 or AV2 input source on the TV
using the INPUT button on the remote control.
ꔛ Refer to the DVD player's manual for operating
instructions.
ꔛ
AUDIO
1
VIDEO
R
AUDIO
USB IN 2
L
IN 4
VIDEO
34
L
R
AUDIO
AV IN2
VIDEO / AUDIO
H/P
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
For LED LCD TV
R
1
COMPONENT IN
Connect the AUDIO/VIDEO jacks between TV
and DVD. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2. How to use
RS-232C IN
(CONTROL&SERVICE)
IN 4
1
RGB IN (PC)
AV IN 1
external equipment setup
1. How to connect
H/P
Composite (RCA) Connection
AV IN2
VIDEO / AUDIO
COMPONENT IN3
AUDIO / Y PB PR
HDMI OUTPUT
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
/DVI IN
LAN
3
AUDIO IN
1
AUDIO OUT
COMPONENT IN
ꔡ
VIDEO L(MONO) AUDIO R
2
WIRELESS
CONTROL
Y
PB
PR
L
AV IN 1
(RGB/DVI) OPTICAL DIGITAL
2
R
1
VIDEO
AUDIO
RGB IN (PC)
(CONTROL&SERVICE)
HDMI Connection
external equipment setup
1. How to connect
1
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1, 2, 3 or 4 jack on the TV.
/DVI IN
LAN
3
AUDIO IN
No separate audio connection is necessary.
HDMI supports both audio and video.
ꔡ
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
2. How to use
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
2
2
RS-232C IN
1
Select the HDMI1, HDMI2, HDMI3, or HDMI4 input
source on the TV using the INPUT button on the
remote control.
ꔛ Refer to the DVD player's manual for operating
instructions.
ꔛ
HDMI OUTPUT
! NOTE
?
►If an HDMI cable doesn’t support High Speed HDMI,
it can cause flickers or no screen display. In this case
? use the latest cables that support High Speed HDMI.
►HDMI Audio Supported Format: Dolby Digital (32 KHz, 44.1
KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
1
WIRELESS
CONTROL
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
VIDEO
L
COMPONENT IN
ꔡ
VIDEO L(MONO) AUDIO R
AUDIO OUT
AV IN 1
!
R
AUDIO
35
external equipment setup
VCR SETUP
Antenna Connection
1
RS-232C IN
Connect the RF antenna
out socket
RGB IN (PC) (CONTROL&SERVICE)
/DVIAntenna/Cable
IN
of the VCR to the
LAN
3
In socket
on the TV.
RGB/DVI OPTICAL DIGITAL
2
2
Y
PB
PR
L
R
1
2. How to use
1
VIDEO L(MONO) AUDIO R
IN AUDIO OUT
Connect the antennaAUDIOcable
to the RF
1
ꔡ
2the VCR.
antenna
in
socket
of
WIRELESS
CONTROL
ANTENNA/
CABLE IN
AUDIO
VIDEO
AV IN 1 COMPONENT IN
external equipment setup
1. How to connect
S-VIDEO
ANT IN
OUTPUT
SWITCH
2
Set VCR output switch to 3 or 4 and
then tune TV to the same channel number.
ꔛ Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
VIDEO
L
Wall Jack
ꔛ
Antenna
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
AUDIO IN
1
WIRELESS
CONTROL
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
L
R
AUDIO
COMPONENT IN
ꔡ
VIDEO L(MONO) AUDIO R
AUDIO OUT
AV IN 1
(RGB/DVI) OPTICAL DIGITAL
2
36
ANT OUT
AUDIO
R
Y
PB
PR
L
R
1
AUDIO
VIDEO
1. How to connect
COMPONENT IN3
AUDIO / Y PB PR
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
LAN
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
ꔛ Select the AV1 or AV2 input source on the TV
using the INPUT button on the remote control.
ꔛ (RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
VIDEO
1
R
! NOTE
►If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the TV.
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
AUDIO
L
VIDEO
L
PR
PB
Y
R
AUDIO
AV IN2
VIDEO / AUDIO
COMPONENT IN3
AUDIO / Y PB PR
USB IN 1
For LED LCD TV
USB IN 2
?
H/P
?
3
IN 4
!
/DVI IN
COMPONENT IN
ꔡ
IN 4
2. How to use
RS-232C IN
(CONTROL&SERVICE)
AV IN 1
AV IN2
VIDEO / AUDIO
RGB IN (PC)
H/P
1
external equipment setup
USB IN 1
USB IN 2
Composite (RCA) Connection
MPONENT IN
2
WIRELESS
CONTROL
ANT IN
ANT OUT
S-VIDEO VIDEO
L
R
AUDIO
OUTPUT
SWITCH
37
external equipment setup
Other A/V Source Setup
Camcorder
1. How to connect
Select the AV1 or AV2 input source on
the TV using the INPUT button on the
remote control.
ꔛ Operate
the corresponding external
equipment.
ꔛ
USB IN 2
L
R
USB IN 1
VIDEO
IN 4
2. How to use
Video Game Set
1
VIDEO L(MONO) AUDIO R H/P
external equipment setup
1
Connect the AUDIO/VIDEO jacks
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)
AV IN 2
USB Connection
onnect the USB device to the USB
C
IN 1 or 2 jack on the side of TV.
2. How to use
ꔛ
After connecting the USB IN jack, you
38
VIDEO L(MONO) AUDIO R H/P
IN 4
use the USB function. (►p.97)
USB IN 1
1
USB IN 2
1. How to connect
AV IN 2
or
Memory Key
Headphone Setup (For LED LCD TV)
You can listen to the sound through headphones.
!
?
Plug headphones into the headphone socket.
2
To adjust the headphone volume,
press the VOL +/- button. If you
press the MUTE button, the sound
from the headphone is switched off.
! NOTE
H/P
1
external equipment setup
1. How to connect
►AUDIO menu options are disabled when connecting
headphones.
►
W
? hen changing AV MODE with headphones connected, the change is applied to video but not to audio.
►Optical Digital Audio Out is not available with headphones connected.
39
external equipment setup
Audio Out Connection
1. How to connect
1
LAN
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
2
3
Connect the other end of the optical cable to
the digital audio input on the audio equipment.
Set the “TV Speaker option - Off” in the
AUDIO menu. (►p.150). See the external audio
equipment instruction manual for operation.
!! NOTE
►When connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
? off in the menu. (►p.150)
?? ?
CAUTION
►Do not look into the optical output port. Looking at
the laser beam may damage your vision.
►Audio with ACP (Audio Copy Protection) function may
block digital audio output.
RS-232C IN
(CONTROL&SERVICE)
3
(RGB/DVI) OPTICAL DIGITAL
2
AUDIO IN
ꔡ
!!
40
RGB IN (PC)
/DVI IN
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
1
2
Y
PB
PR
L
R
1
VIDEO
2
AUDIO
AV IN 1 COMPONENT IN
external equipment setup
Send the TV’s audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
External Equipment WIreless Connection
(Optional Extras)
WIRELESS
CONTROL
OUT
RGB IN (PC)
external equipment setup
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately.
When you connect the wireless ready dongle (included with the media box) to the TV, external devices
can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
2
1. How to connect
1
onnect the WIRELESS CONTROL jack of the Wireless Ready Dongle to the WIRELESS
C
CONTROL jack on the TV.
2
Connect HDMI OUT jack of the Wireless Ready Dongle to the HDMI IN jack on the TV.
2. How to use
ꔛ
ꔛ
!
?
Select the desired input source on the TV using the INPUT button on the remote control.
Refer to the Wireless Media Box manual for operating instructions.
! NOTE
►When using the external device connected to the Wireless Media Box, some functions of the TV
menu may not work.
?
41
external equipment setup
PC Setup
RS-232C IN
RGB IN (PC)
(CONTROL&SERVICE)
/DVI IN
(RGB/DVI) OPTICAL DIGITAL
2
VGA (D-Sub 15 Pin) Connection
1. How to connect
1
Connect the VGA output of the PC to the
RGB IN (PC) jack on the TV.
AUDIO OUT
AUDIO IN
1
WIRELESS
CONTROL
2
RS-232C IN
RGB IN (PC)
Y
/DVI IN
LAN
(CONTROL&SERVICE)
L R
PR
PB
1
3
VIDEO L(MONO) AUDIO R
2
ꔡ
AUDIO
VIDEO
(RGB/DVI) OPTICAL DIGITAL
AUDIO OUT
AUDIO IN
1
2
WIRELESS
CONTROL
Y
PB
PR
L
AUDIO
VIDEO
2
R
1
AV IN 1 COMPONENT IN
external equipment setup
ꔡ
AV IN 1 COMPONENT IN
LAN automatically
This TV provides Plug and Play capability, meaning that a PC adjusts
to the TV's set3
VIDEO L(MONO) AUDIO R
tings.
Connect PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
2. How to use
2
Turn on the PC and the TV.
ꔛ Select the RGB-PC input source on the TV using
the INPUT button on the remote control.
1
ꔛ
DVI to HDMI Connection
LAN
3
(RGB/DVI) OPTICAL DIGITAL
AUDIO OUT
AUDIO IN
1
WIRELESS
CONTROL
2
Y
/DVI IN
LAN
1
3
2
AUDIO OUT
2
Y
PB
PR
L
R
1
VIDEO
* HDMI4: For Plasma TV
DVI OUTPUT
42
VIDEO L(MONO) AUDIO R
AUDIO
AUDIO
AV IN 1 COMPONENT IN
WIRELESS
CONTROL
1
AUDIO
VIDEO
AUDIO IN
1
(CONTROL&SERVICE)
L R
PR
PB
(RGB/DVI) OPTICAL DIGITAL
ꔡ
RS-232C IN
RGB IN (PC)
2
Turn on the PC and the TV.
ꔛ Select the HDMI1, HDMI2, HDMI3, or HDMI4* input
source on the TV using the INPUT button on the
remote control.
VIDEO L(MONO) AUDIO R
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
ꔛ
(CONTROL&SERVICE)
AV IN 1 COMPONENT IN
Connect the DVI output of the PC to the HDMI/
DVI IN 1, 2, 3, or 4* jack on the TV.
2. How to use
RS-232C IN
RGB IN (PC)
/DVI IN
ꔡ
2
RGB OUTPUT
AUDIO
1. How to connect
1
RGB OUTPUT
AUDIO
!
! NOTE
?
►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
?
►In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
►Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
►The synchronization input form for Horizontal and Vertical frequencies is separate.
►Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
►If you experience overscan issues when using HDMI-PC 1920x1080, change aspect ratio to Just
scan.
external equipment setup
►To get the the best picture quality, adjust the PC graphics card to 1920x1080.
►When selecting HDMI-PC, set the “Input Label - PC” in the OPTION menu.
Supported Display Specifications (RGB-PC, HDMI-PC)
Resolution
Horizontal
Frequency (KHz)
Vertical
Frequency (Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x768
47.776
59.87
1360x768
47.712
60.015
1280x1024
63.981
60.02
1920x1080
RGB-PC
66.587
59.934
1920x1080
HDMI-PC
67.50
60.00
43
external equipment setup
Screen Setup for PC mode
external equipment setup
Selecting Resolution
You can choose the resolution in RGB-PC mode.
The Position, Phase, and Size can also be adjusted.
You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
PICTURE
ꔂ Move
ꔉ Enter
SCREEN
Resolution
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
• Picture Reset
Position
Size
• TruMotion
• Screen (RGB-PC)
Auto Config.
ꔉ
ꔀ
• LED Local Dimming: On
Phase
Reset
1
2
3
4
5
44
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Resolution.
ENTER
Select the desired resolution.
ENTER
ꔂ Move
ꔑ 1024 x 768
□ 1280 x 768
□ 1360 x 768
� Prev.
Auto Configure
Screen Reset (Reset to original initial values)
Returns Position, Size, and Phase to the default initial settings.
This feature operates only in RGB-PC mode.
PICTURE
ꔂ Move
ꔉ Enter
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
• Picture Reset
ꔉ
ꔀ
• LED Local Dimming: On
1
2
3
4
5
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Auto Config. or
Reset.
ENTER
Select Yes.
ꔂ Move
� Prev.
SCREEN
Resolution
Resolution
Auto Config.
Auto Config.
Position
• TruMotion
• Screen (RGB-PC)
SCREEN
Size
Auto Config.
Yes
No
ꔂ Move
Position
Size
Phase
Phase
Reset
Reset
� Prev.
external equipment setup
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
To Set
Yes
No
If the position of the image is still not
correct, try Auto adjustment again.
ꔛ If picture needs to be adjusted again
after Auto adjustment in RGB-PC,
you can adjust the Position, Size or
Phase.
ꔛ
ENTER
45
external equipment setup
Adjustment for screen Position, Size, and Phase
external equipment setup
If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually.
This feature operates only in RGB-PC mode.
PICTURE
ꔂ Move
SCREEN
ꔉ Enter
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
• Picture Reset
ꔂ Move
� Prev.
Resolution
▲
Auto Config.
Position
• TruMotion
• Screen (RGB-PC)
◀
▶
Size
ꔉ
ꔀ
▼
Phase
• LED Local Dimming: On
Reset
1
2
3
4
5
46
MENU
Select PICTURE.
ENTER
Select Screen (RGB-PC).
ENTER
Select Position, Size, or Phase.
ENTER
Make appropriate adjustments.
ENTER
Position: This function is to adjust
picture to left/right and up/down as
you prefer.
ꔛ Size: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
ꔛ Phase: This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
ꔛ
Network Setup
Wired Network Connection
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
1
3
ꔡ
AUDIO IN
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
VIDEO
Broadband modem
Broadband Service
AUDIO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
2
external equipment setup
This TV can be connected to a local area network (LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network communication.
Router
Broadband modem
Broadband Service
1. How to connect
1
Connect the LAN port of the Modem or Router to the LAN port on the TV.
2. How to use
Select “Network Setting” in the Network menu.
ꔛ After connecting the LAN port, use the NetCast menu.
ꔛ For more information about NETCAST setup and troubleshooting, visit http://lgknowledgebase.
com. Search for NETCAST.
ꔛ
!
!
?
?
CAUTION
►Do not connect a modular phone cable to the LAN port.
►Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider.
47
external equipment setup
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
external equipment setup
NETWORK
ꔂ Move
If you already set the
Network Setting
ꔉ Enter
• Network Setting
: Wired
• Network Status
Wired network is recommended
: Internet is connected
Wired
• Legal Notice
Previous setting value exists. Do
you want to connect with the
previous setting?
Network Type
• ESN
Enter
Wireless
Resetting
ꔉ Next
Appeared when wired and
wireless are simultaneously
connected.
IP Auto Setting
Network Setting
Network Status
IP Mode
Network connecting
Setting
Test
2
3
4
5
255 . 255 . 0 . 0
�IP Address
255 . 255 . 0 . 0
255 . 255 . 0 . 0
�Subnet Mask
255 . 255 . 0 . 0
�Gateway
255 . 255 . 0 . 0
�Gateway
255 . 255 . 0 . 0
�DNS Server
255 . 255 . 0 . 0
�DNS Server
255 . 255 . 0 . 0
Enter
Close
ENTER
Select Network Setting.
ENTER
Select Wired.
ENTER
If you already set Network Setting:
Select Resetting. The new connection
settings resets the current network
settings.
ENTER
Select IP Auto Setting or IP Manual
Setting.
2 ABC 3 DEF
7PQRS 8 TUV 9 WXYZ
0
6
48
ENTER
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
Select Enter.
◀ IP Manual Setting ▶
�Subnet Mask
Select NETWORK.
4 GHI 5 JKL 6 MNO
IP Mode
�IP Address
MENU
1
Insert the IP address.
◀ IP Auto Setting ▶
ꕉ Previous
1
IP Manual Setting
Network Setting
Select the IP setting mode.
TV
ꕯ Exit
Enter
ꕯ Exit
ꕉ Previous
ꕯ Exit
This feature requires an always-on
broadband internet connection.
ꔛ You do not need to connect to a PC
to use this function.
ꔛ If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
ꔛ If the Network Setting is not completed, network may not operate normally.
ꔛ IP Auto Setting: Select it if there is a
DHCP server on the local area network (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you are using a router,
it (normally) will have the DHCP
server activated by default.
ꔛ IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manually.
ꔛ
!
►For more information about NETCAST setup
and troubleshooting, visit http://lgknowledge? base.com. Search for NETCAST.
►Use a standard LAN cable with this TV. Cat5
or better with a RJ45 connector.
►Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the player to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
►Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact
your ISP.
►LG is not responsible for any malfunction of
the TV and/or the internet connection feature
due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
►LG is not responsible for problems within your
internet connection.
►Some content available through the network
connection may not be compatible with the
TV. If you have questions about such content,
please contact the producer of the content.
►You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
►Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
►Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
►A 10 Base-T or 100 Base-TX LAN port is
required for connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV.
►A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the internet connection feature contained in this TV or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits subscription to one device, this TV may
not be allowed to connect when a PC is
already connected.)
►The use of a “Router” may not be allowed or
its usage may be limited depending on the
policies and restrictions of your ISP. For details,
contact your ISP directly.
►The wireless network operates at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone, Bluetooth® devices, microwave oven,
and can be affected by interference from
them. It can be interrupted by the device
using 5Ghz radio frequencies. It is same
device with LG wireless media box, cordless
telephone, other Wi-Fi device.
►It may decrease the service speed using
Wireless network by surrounding wireless condition.
►Turn off all unused network equipment in your
local home network. Some devices may generate network traffic.
►In some instances, placing the access point or
wireless router higher up away from the floor
may improve the reception.
►The reception quality over wireless depends
on many factors such as type of the access
point, distance between the TV and access
point, and the location of the TV.
►When connecting internet through the wired/
wireless sharing machine, it may interrupt the
connection because of the use limitation and
confirmation of service company.
►To connect wireless AP, an AP that supports
the wireless connection is necessary, and the
wireless connection function of the AP needs
to be activated. Please enquire to the AP supplier for the possibility of AP wireless connections.
►Please verify the security settings of AP SSID
for wireless AP connection, and enquire to the
AP supplier for the AP SSID security settings.
►The TV can become slower or malfunction
with wrong settings of network equipments
(wired/wireless router, hub, etc). Please install
correctly by referring to the manual of the
equipment, and set the network.
►When AP is set to include 802.11 n, and if
Encryption is designated as WEP(64/128bit)
or WPA(TKIP/AES), the connection may not
be possible. There may be different connection methods according to the AP manufacturers.
external equipment setup
?
! NOTE
49
external equipment setup
Wireless Network Connection
VIDEO L(MONO) AUDIO R H/P
IN 4
USB IN 1
USB IN 2
external equipment setup
The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect
to a wireless lan network.
The network configuration and connection method may vary depending on the equipment in use and
the network environment. Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
AV IN 2
1. How to connect
1
Connect the “LG Wireless LAN for Broadband/DLNA Adaptor (LED LCD TV: sold separately)” to the USB IN 1 or 2 port on the TV.
2. How to use
ꔛ
ꔛ
!
?
50
Select “Network Setting” in the Network menu.
After connecting, you can use the NetCast menu.
! NOTE
►We recommend you use a wired network connection when available when viewing movies over the
network connection.
?
►When
the wireless port of the router is used, there may be restrictions for some functions.
Wireless Network Setup
Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the
network.
ꔂ Move
• Network Setting
: Wired
• Network Status
: Internet is connected
ꔉ Enter
Network Type
Wired network is recommended
• Legal Notice
• ESN
Selecting the wireless network setting type
Previous setting value exists. Do
you want to connect with the
previous setting?
Wired
Enter
Wireless
Resetting
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꔉ Next
ꕯ Exit
ꔉ Next
ꕉ Previous
ꕯ Exit
Appeared when wired and wireless
are simultaneously connected.
If your AP is locked
Network Setting
IP Mode
◀ IP Auto Setting ▶
�IP Address
255 . 255 . 0 . 0
�Subnet Mask
255 . 255 . 0 . 0
�Gateway
255 . 255 . 0 . 0
�DNS Server
255 . 255 . 0 . 0
1
2
3
Page 1/1
Input the new SSID
Insert 8~63 ASCII characters
◀
5
ꕯ Exit
Cancel
ꔉ Next
ꕉ Prev.
ENTER
Select Network Setting.
ENTER
Access Point
Search
� Connecting with PIN mode
Enter
Select NETWORK.
ENTER
iptime
Network1
Select Wireless.
If you already set Network
Setting: Select Resetting.
The new connection settings
resets the current network settings.
ꕉ Previous
ꕯ Exit
6
ENTER
7
8
1
4
▶
ASW
MENU
ENTER
Select AP you want to connect.
Insert the security key of AP.
Enter
ꕉ Previous
Selecting AP
Inserting the security key
Select the IP setting mode.
external equipment setup
NETWORK
If you already set the
Network Setting
Scan the all available AP (Access
Point) or wireless routers within range
and display them as a list.
ENTER
Select an AP (Access Point) or
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
ENTER
Input the security key of AP.
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ꕯ Exit
0
9
Repeat step 4-5 on P.48.
Select Setting from the AP list.
51
external equipment setup
When a security code is already set
PIN (Personal Identification Number)
external equipment setup
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecting AP
Connecting with PIN mode
Select AP you want to connect.
Page 1/1
Insert PIN number at the AP webpage and
press ‘Connect’ button.
Input the new SSID
PIN NUBMER : 12345670
iptime
Connect
ASW
Access Point
Search
Network1
For more information, check the AP manual.
ꔉ Next
� Connecting with PIN mode
ꕉ Previous
ꔉ Next
ꕉ Previous
1
2
3
ꕯ Exit
4
Repeat step 1-6 on P.51.
RED
ꕯ Exit
Connect the acccess point with PIN
mode.
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
Select Connect.
ENTER
5
Repeat step 4-5 on P.48.
ꔛ
PIN number is the unique 8 digit number
of the dongle.
Simple setting (WPS-button mode)
Use the simple setting if your access point or wireless router supports a PIN or WPS (Wi-Fi Protected
Setup)
Select the wireless network setting type.
Select the wireless network setting type.
Simple setting (WPS-button mode)
Press PBC Mode button of AP and press ‘Connect’ button.
Setting from the AP list
Connect
Simple setting (WPS-button mode)
Caution: Check if PBC mode button is available for your AP.
Setting Ad-hoc network
ꔉ Next
ꔉ Next
ꕉ Previous
1
2
52
ꕯ Exit
Repeat step 1-4 on P.51.
ENTER
Select Simple setting (WPSbutton mode).
ꕉ Previous
ꕯ Exit
3
4
ENTER
Select Connect.
Repeat step 4-5 on P.48.
AD-hoc Mode
The below settings are only for connecting directly to a PC.
This is the same as connecting two PCs with a cross-over cable.
Setting Ad-hoc network
Setting Ad-hoc network
Select the wireless network setting type.
Insert the setting information into the device.
Features using exiting network can be unavailable. Do you
Setting from the AP list
Network ID(SSID) : LGTV10
want to change network connection?
Security Key : 1111111111
Simple setting (WPS-button mode)
Enter
Setting Ad-hoc network
Cancel
ꕉ Previous
� Changing the setting information.
ꔉ Next
ꔉ Next
ꕉ Previous
ꕯ Exit
Connect
ꕯ Exit
ꕉ Previous
IP Mode
Signal Strength
Gateway
Setting
Mac Address: 00:00:13:64:23:01
IP Address : 10.19.152.115
Subnet Mask : 255.255.254.0
Gateway
: 10.19.152.1
Test
Insert the setting information into the device.
Insert the IP address.
Adhoc network is connected.
(LGTV10)
TV
Network ID(SSID) : LGTV10
IP Manual Setting
�IP Address
192 . 168 . 0 . 10
�Subnet Mask
255 . 255 . 255 . 0
�Gateway
192 . 168 . 0 . 1
�DNS Server
255 . 255 . 0 . 0
Security Key : 1111111111
Connecting the Ad-hoc network
Cancel
Enter
Close
ꕯ Exit
ꔛ
PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
ꔛ
TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
2
3
4
Repeat step 1-3 on P.51.
ENTER
ENTER
ENTER
Select Setting AD-hoc network.
ENTER
Example of the PC setting that
supports a wireless network
1. Find a wireless network device in
your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
ꔛ
ꕉ Previous
1
ꕯ Exit
Setting Ad-hoc network
Network Setting
Network Status
ꔉ Next
external equipment setup
Selecting the wireless network setting type
5
6
ENTER
Insert the IP address.
ENTER
Network setting is completed.
Select Close.
Select Enter.
Select Connect to connect Ad-hoc
network.
You can see the Network ID and
Security Key on your TV screen.
Enter this Network ID and Security
Key to your device.
If a network may not operate,
change the setting information
using the RED button.
53
external equipment setup
Network Status
external equipment setup
NETWORK
ꔂ Move
Network Status
ꔉ Enter
TV
• Network Setting
: Wired
• Network Status
: Internet is connected
Network connecting
• Legal Notice
• ESN
Setting
Test
Close
Select the wireless network setting type.
Network Setting
Select the wireless network setting type.
Select the IP setting mode.
IP Mode
◀ IP Auto Setting ▶
�IP Address
255 . 255 . 0 . 0
�Subnet Mask
255 . 255 . 0 . 0
�Gateway
255 . 255 . 0 . 0
�DNS Server
255 . 255 . 0 . 0
Setting Ad-hoc network
ꔉ Next
ꕉ Previous
ꕯ Exit
Wireless Connection
Enter
ꕉ Previous
Setting from the AP list
Simple setting (WPS-button mode)
ꕯ Exit
Wired Connection
1
2
3
54
MENU
Select NETWORK.
ENTER
Select Network Status.
ENTER
Check the newtwork status.
Setting: Return to the network setting menu or wireless network setting
type menu.
ꔛ Test: Test the current network status
after setting the network.
ꔛ Close: Return to the previous menu.
ꔛ
watching tv / channel control
Remote Control Functions
When using the remote control, aim it at the remote control sensor on the TV.
The remote control may differ from the images below.
Turns the TV on from standby or off to
standby.
LIGHT
Illuminates the remote control buttons.
ENERGY SAVING
Adjusts the Energy Saving setting.
►p.132
AV MODE
LIGHT
INPUT
ENERGY AV MODE INPUT
TV
SAVING
1
2 ABC 3 DEF
TV
4 GHI 5 JKL 6 MNO
0
— (DASH)
FLASHBK
MARK
FAV
VOL
CHAR/NUM
RATIO
DELETE
CH
MUTE
MENU
Q.MENU
P
A
G
E
LIST
FLASHBK
VOLUME UP/
DOWN
ENTER
BACK WIDGETS EXIT
Rotates through inputs.
Also switches the TV on from standby.
Returns to the last TV channel.
NUMBER button
7PQRS 8 TUV 9 WXYZ
LIST
Toggles through preset Video and
Audio modes. ►p.85
FAV
Used to enter a program number for
multiple program channels such as 2-1,
2-2, etc.
MUTE
DELETE
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
LIST
0
FLASHBK
MARK
FAV
CHAR/NUM
3D
DELETE
MENU
Adjusts the volume.
CH
P
A
G
E
Q.MENU
ENTER
Set up desired favorite channels list.
Changes the aspect ratio.
CHAR/NUM
1
MUTE
Tunes to the last channel viewed.
RATIO
3D
TV
SAVING
VOL
Displays the channel table.
Select the input to apply the Picture
Wizard settings. ►p.131
Use to mark or unmark a photo/music/
movie. ►p.105, 110, 116
INFO
ENERGY AV MODE INPUT
7PQRS 8 TUV 9 WXYZ
MARK
FREEZE
LIGHT
watching TV / channel control
POWER
BACK WIDGETS EXIT
L/R SELECT
INFO
RATIO
►p.128
Used for viewing 3D video.
►p.94
Shifts the Character or Number in
internet settings.
Switches the sound on or off.
Delete the character or number on the
screen.
CHANNEL
UP/DOWN
Changes the channel.
page
UP/DOWN
Moves from one full set of screen information to the next one.
55
LIGHT
LIGHT
WATCHING TV / CHANNEL CONTROL
ENERGY AV MODE INPUT
ENERGY AV MODE INPUT
TV
TV
SAVING
1
SAVING
2 ABC 3 DEF
1
4 GHI 5 JKL 6 MNO
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
7PQRS 8 TUV 9 WXYZ
LIST
0
FLASHBK
MARK
FAV
VOL
CHAR/NUM
CH
RATIO
DELETE
P
A
G
E
MENU
MUTE
watching TV / channel control
MENU
Q.MENU
ENTER
Select the desired NETCAST menu
source. ►p.123
Q.MENU
Opens the list of Quick Menu options.
►p.66
ENERGY AV MODE INPUT
TV
BACK WIDGETS EXIT
SAVING
1
2 ABC 3 DEF
FREEZE
4 GHI 5 JKL 6 MNO
Navigates the on-screen menus and
adjusts the system settings to your
preference.
BACK
Allows the user to move return one step
in an interactive application or other
user interaction function.
LIST
FLASHBK
WIDGETS
MARK
FAV
VOL
CHAR/NUM
RATIO
DELETE
CH
MUTE
MENU
P
A
G
E
BACK INFO
EXIT
FREEZE
WIDGETS for showing or hiding the
Yahoo! Dock and accessing the Yahoo!
TV Widgets user experience.
INFO
Displays channel information at the
bottom of the screen. ►p.78
EXIT
Clears all on-screen displays and return
to TV viewing.
COLOR
button
Access special functions in some
menus.
Q.MENU
L/R SELECT
Used for viewing 3D video.
LIST
0
FLASHBK
MARK
FAV
VOL
CHAR/NUM
CH
3D
DELETE
P
A
G
E
MUTE
MENU
Q.MENU
LIGHT
ENTER
ENERGY AV MODE INPUT
THUMBSTICK
(Up/Down/Left
Right/ENTER)
7INFO
PQRS 8 TUV 9 WXYZ
0
Displays the main menu or clears all
on-screen displays and return to TV
viewing.
Netcast
ENTER
TV
SAVING
BACK WIDGETS EXIT
1
2 ABC 3 DEF
L/R SELECT
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
INFO
LIST
0RATIO
FLASHBK
MARK
FAV
VOL
CHAR/NUM
3D
DELETE
CH
P
A
G
E
MUTE
MENU
Q.MENU
ENTER
BACK INFO
EXIT
L/R SELECT
►p.95
RATIO
56
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
7PQRS 8 TUV 9 WXYZ
LIST
0
FLASHBK
LIST
MARK
CHAR/NUM
INPUT
ENERGY AV MODE
RATIO
SAVING
DELETE
MUTE
CH
TV
VOL
SAVING
USB,
SIMPLINK
Control buttons
LIST WIDGETS EXIT
BACK
MARK
FAV
P
A
G
E
MUTE
MENU
INFO
FREEZE
Q.MENU
(For Plasma TV)
ENTER
BACK INFO
EXIT
FREEZE
SIMPLINK
•C
ontrols MY MEDIA menu (Movie List,
Photo List, Music List)
• Controls the SIMPLINK compatible
devices.
Pause the present picture at the screen.
(It doesn’t work at USB Mode and
Simplink.)
The TV returns to normal viewing automatically if no signal is received or no
operation is performed for 5 minutes.
If you keep the screen in Freeze condition, the residual image can exist.
See a list of AV devices connected to
TV.
When you toggle this button, the
SIMPLINK menu appears at the screen.
LIST
0
FLASHBK
EXIT
BACK WIDGETS
MARK
FAV
VOL
CHAR/NUM
3D
DELETE
L/R SELECT
CH
MUTE
MENU
INFO
Q.MENU
RATIO
ENTER
BACK INFO
EXIT
L/R SELECT
RATIO
►p.90
RATIO
Changes the aspect ratio.
P
A
G
E
►p.128
watching TV / channel control
DELETE
CH
TV
P
A
G
E
ENTER
FLASHBK
FREEZE
DELETE
MUTE
CH
7PQRS 8 TUV 9 WXYZ
7PQRS 8 TUV 9 WXYZ
RATIO
3D
4 GHI 5 JKL 6 MNO
ENTER
VOL
CHAR/NUM
1MENU 2 ABC Q.MENU
3 DEF
4 GHI 5 JKL 6 MNO
CHAR/NUM
LIGHT
MARK
ENERGY AV MODE INPUT
P
A
G
E
1MENU 2 ABC Q.MENU
3 DEF
0
FLASHBK
FAV
FAV
VOL
0
Installing Batteries
Open the battery compartment cover on the back side and install
the batteries matching correct polarity.
ꔛ Install two 1.5V AAA batteries. Don’t mix old or used batteries
with new ones.
ꔛ Close cover.
ꔛ
57
WATCHING TV / CHANNEL CONTROL
Magic Motion Remote Control Functions
Pointer Receiver
watching TV / channel control
POWER
ENTER
VOL
CH
Blinks the light when operating.
Turns the TV on from standby or off to standby.
ENTER/HOME
Menu Button
Activates the pointer.
VOLUME UP/
DOWN
Adjusts the volume.
CHANNEL
UP/DOWN
MUTE
Changes the channel.
Switches the sound on or off.
MUTE
Installing Batteries
When the message "Magic motion
remote control battery is low. Change
the battery." is displayed, replace the
battery.
ꔛ Open
the battery compartment
cover on the back side and install the
batteries matching correct polarity.
ꔛ Install two 1.5V AA batteries. Don’t
mix old or used batteries with new
ones.
ꔛ Close cover.
ꔛ
RF Specification of the Magic Motion Remote Control
The Magic Motion Remote Control communicates with your TV by using a 2.4 GHz bandwidth radio
frequency (RF).
ꔛ Output: 1 dBm or lower
ꔛ Maximum Communication Distance: 10 m (30 ft) in an open space
ꔛ Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
ꔛ Transfer Rate: 250 kbps
58
Magic Motion Remote Control Registration
The Magic Motion Remote Control operates by pairing with your TV.
Register the Magic Motion Remote Control after purchasing the TV.
ENTER
How to Re-register the Magic Motion Remote Control after
Registration Failure
Reset the remote control by pressing and holding both the
ENTER and Mute buttons for 5 seconds. (Once the reset is
complete, the light on the Pointer RF Receiver blinks.) Then
repeat the above procedure to register the remote control.
How to use Magic Motion Remote Control
1
Press this button if there is no pointer on your TV screen. The pointer will then appear on the
screen.
If the pointer has not been used for a certain period of time, it will disappear.
ENTER
2
You can move the pointer by aiming the Pointer Receiver of the remote
control at your TV then move it left, right, up or down.
If the pointer does not work properly after clicking the ENTER button, leave
the remote control for 10 seconds then use it again.
INPUT
MENU
ENTER
VOL
watching TV / channel control
MUTE
How to register the Magic Motion Remote Control
To register the Remote Control, press the ENTER button on the
Remote Control while aiming it at your TV.
CH
Precautions to Take when Using the Magic Motion Remote Control
Use the remote control within the maximum communication distance (10 m). Using the remote control
beyond this distance, or with an object obstructing it,
may cause a communication failure.
ꔛ A communication failure may occur due to nearby
devices. Electrical devices such as a microwave oven or
wireless LAN product may cause interference, as this
will use the same bandwidth (2.4 GHz) as the Magic
Motion Remote Control.
ꔛ The Magic Motion Remote Control may be damaged
or may malfunction if it is dropped or receives a heavy
impact.
ꔛ When playing a game using the Magic Motion Remote
Control, hold it securely by wrapping its strap around
your wrist and adjusting the length with the adjustable
ring.
ꔛ Take care not to bump into nearby furniture or other
people when using the Magic Motion Remote Control.
ꔛ Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
ꔛ
59
WATCHING TV / CHANNEL CONTROL
Pointer Menu Options
Simple Manual
Exit
watching TV / channel control
Today
Today
Today
Today
Quick Menu
30
30
30
Channel List
SIMPLINK
NETCAST
INPUT
MY MEDIA
GAME/SCHEDULE Quick Menu
Netcast
Screen Remote
•Speed
◀
Normal
▶
•Shape
◀
Type A
▶
•Size
◀
Medium
▶
•Alignment
◀
On
▶
� Exit
1
2
3
4
60
Pointer
Home Menu
Speed: Changed the pointer speed.
Shape: Select the pointer shape.
ꔛ Size: Changes the pointer size.
ꔛ Alignment: When Alignment is On,
you can easily align the remote control's direction with the pointer on
your TV screen by shaking the remote
control left and right. Then, the pointer automatically moves to the center
of the screen.
ꔛ
ENTER
ENTER
Select Home Menu.
ENTER
Select Pointer.
ENTER
Make appropriate adjustments.
ENTER
Select Exit.
ꔛ
Turning on the TV
1
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the / I, INPUT, CH (ꕌ or ꕍ) button on the TV or press
the , INPUT, CH (ꕌ or ꕍ), Number (0-9) button on the remote control.
ꔛ
Select the viewing source by using the INPUT button on the remote control.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts
to standby mode.
! NOTE
►If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
?
►If you do not complete the Initial setting, it will appear whenever the TV is switched on until the
? Initial setting procedure is completed.
watching TV / channel control
!
2
Channel Selection
1
Press the CH (ꕌor ꕍ) or NUMBER buttons to select a channel number.
Volume Adjustment
Adjust the volume to suit your personal preference.
1
Press the VOL (+ or -) button to adjust the volume.
2
If you want to switch the sound off, press the MUTE button.
3
You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
61
WATCHING TV / CHANNEL CONTROL
INITIAL SETTING
This Function guides the user to easily set the essential items for viewing the TV for the first time
when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It
can also be activated from the user menus.
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
ꔛ “Store Demo” Mode is only intended for use in retail environments. Customers can adjust the
“Picture menu - Picture mode” manually while inspecting the TV, but the TV will automatically
return to preset in-store mode after 5 minutes.
ꔛ “Store Demo” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes
the TV to set the image quality.
ꔛ
WATCHING TV / CHANNEL CONTROL
Step 1. Selecting Language
WELCOME!
Thank you for choosing LG
1
Step 1. Language
ENTER
Select Menu Language.
ENTER
Select Home Use.
English
Español
Français
한국어
ꔉ Next
Step 2. Mode setting
Step 2. Mode Setting
1
i Selecting the environment.
Choose the setting mode you want.
Select [Home Use] when setting TV up
in-home. You can adjust picture quality
accordingly through Picture Mode menu
option.
Home Use
• Demo Mode
ꕉ Previous
Store Demo
◀
Off
▶
ꔉ Next
Only LED LCD TV for USA/Canada
62
Step 3. Power Indicator (For LED LCD TV)
Step 3. Power Indicator
Standby Light
◀
▶
Off
ENTER
Select On or Off.
ꔉ Next
ꔛ
This function is disable in “Step2. Mode
Setting - Store Demo”.
Step 4. Time Zone
1
Step 4. Time Zone
Time Zone
◀
Eastern
▶
Daylight Saving
◀
Auto
▶
ꕉ Previous
2
ENTER
Select Time Zone option.
ENTER
Select Daylight Saving option.
ENTER
Check your antenna connection and start Auto Tuning.
watching TV / channel control
ꕉ Previous
1
ꔉ Next
Step 5. Auto Tuning
1
Step 5. Auto Tuning
Before starting,
be sure that the
TV antenna is connected.
ꕉ Previous
ꔉ Next
63
WATCHING TV / CHANNEL CONTROL
On-Screen Menus Selection
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
watching TV / channel control
2
3
MENU
Display each menu.
ENTER
Select a menu item.
Channel
channel
4
Accept the current selection.
Return to TV viewing.
EXIT
ꔂ Move
PICTURE
ꔉ Enter
• Auto Tuning
• Aspect Ratio
• Manual Tuning
• Picture Wizard
• Channel Edit
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off �3
ꔂ Move
ꔉ Enter
: 16:9
• ꕊ Energy Saving : Off
PICTURE
AUDIO
AUDIO
ENTER
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
TIME
ꔉ Enter
ꔂ Move
ꔉ Enter
ꔂ Move
ꔉ Enter
• Clock
• Balance
0
• Sound Mode
: Standard
• Infinite Sound: Off
• Treble
50
• Bass
50
• Reset
L
R
TIME
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
For USA
LOCK
ꔂ Move
OPTION
ꔉ Enter
• Set Password
LOCK
• Language
• Lock System
: On
• Caption
• Block Channel
• Power Indicator
• Movie Rating
• TV Rating-Children
• Set ID
:1
• TV Rating-General
• Mode Setting
: Home Use
• Downloadable Rating
• IR Blaster
: Off
• Input Block
ꔛ
• Set Password
64
• Lock System
: On
• Block Channel
• TV Rating-English
• TV Rating-French
• Downloadable Rating
• Input Block
• Key Lock
: Off
• Initial Setting
OPTION
For Canada, Philippines
: Off
For further information, refer to the
optional “Wireless Media Box”
manual for operating instructions.
!
! NOTE
?
►ISM Method: For Plasma TV.
►Backlight, TruMotion, LED Local Dimming,
? Power Indicator: For LED LCD TV.
NETWORK
• Network Setting
: None
• Network Status
: Not connected
ꔉ Enter
• Legal Notice
• ESN
Input List
ꔂ Move
TV
USB1
USB2
AV 1
AV 2
Component1
Component2
RGB-PC
HDMI1
HDMI2
HDMI3
HDMI4
INPUT
� Input Label
ꔉ Enter
watching TV / channel control
Network
ꔂ Move
ꕉ Exit
MY MEDIA
MY MEDIA
Today
Movie List
Photo List
Music List
GAME/SCHEDULE
30
GAME/SCHEDULE
WORLD TIME
SCHEDULE
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE
WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
ꕯ Exit
65
WATCHING TV / CHANNEL CONTROL
Quick Menu
our TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Y
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
watching TV / channel control
ꕁAspect Ratio: Selects your desired picture format.
ꕇPicture Mode: Selects the desired preset picture setting.
ꕈSound Mode: Selects the desired preset sound setting.
ꔴ Multi Audio: Changes the audio language (Digital signal).
ꔴ SAP: Selects MTS sound (Analog signal).
ꔤSleep Timer: Select the amount of time before your TV turns off automatically.
ꔳDel/Add: Select channel you want to add or delete.
ꕄCaption: Select on or off.
ꔢUSB Device: Select “Eject” in order to eject a USB device.
Aspect Ratio
Home Menu
Quick Menu
Channel List
16:9 �
A
Netcast
Screen Remote
ꕉ Close
1
2
3
66
ENTER
ENTER
Select Quick Menu.
ENTER
Select a menu item.
ENTER
Select Close.
ꔛ
Quick Menu can be selected either by
pressing the Q.MENU button on a
standard remote control, or by selecting on the Home Menu screen.
Home Menu
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
ENTER
ENTER
2
Select a menu item.
Home Menu
Simple Manual
Pointer
Exit
Quick Menu
Channel List
Today
Today
Today
Today
30
30
30
Netcast
SIMPLINK
INPUT
NETCAST
MY MEDIA
GAME/SCHEDULE Quick Menu
Screen Remote
SIMPLINK allows you to control and play other AV devices connected with HDMI
30
cable without additional cables and settings. This TV may work with devices with
HDMI-CEC support, but only devices with the
logo are fully supported.
Today
SIMPLINK
watching TV / channel control
ENTER
Select Home Menu.
Today
30
Select the desired input source.
INPUT
Today
30
Select NETCAST menu option and enjoy Online Service.
NETCAST
Today
30
Used for viewing photos, watching movies and listening to MP3s.
MY MEDIA
Today
30
Allows you to enjoy the games installed on the TV or set the schedule.
GAME/SCHEDULE
Today
30
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
Quick Menu
Simple Manual
Pointer
Exit
You can easily and effectively access the TV information by viewing a simple manual on the TV.
Set up the Magic Motion Remote Control setting.
Close the Home menu.
67
WATCHING TV / CHANNEL CONTROL
Customer Support
Software Update
watching TV / channel control
You can update the TV with the latest software to enhance the product operation and/or add new features.
You can update the software by connecting the TV directly to the software update server.
The Software Update function may not work properly depending on your internet environment. In this
case, you can obtain the latest software from the authorized LG Electronics Service Center then update
your TV.
ꔑ Software Update
□ Picture Test
01.00.09
□ Product/Service Info.
□ Network Test
Check Update Version
Close
1
2
MENU
RED
Select Customer Support.
ENTER
Select Software Update.
ENTER
Select Check Update Version to check
the newest version.
When selecting “Software Update-On”
- If the TV is connected to the internet
and it finds a software update on the
LG server, the update popup menu will
appear automatically.
- If the updated digital software information is transmitted, the update popup
menu will appear automatically.
On
• Current Version
□ Sound Test
3
68
Software Update
Close
The software downloading time will
vary depending on the software size
and network conditions.
ꔛ During the software update procedure, do not turn off the TV or disconnect AC power, or disconnect the
LAN cable.
ꔛ After software update, you can confirm the update software version at
software Update menu.
ꔛ When update is completed, the TV
will restart automatically in 5 seconds.
ꔛ The TV functions may be improved
or changed by software update.
ꔛ The available time or functionality of
NetCast menu may be depends on
your ISP network conditions.
ꔛ When an update is completed, some
CHANNEL, PICTURE, and AUDIO
menu settings may need resetting.
ꔛ This TV cannot be updated to previous software version.
ꔛ Use the “Check Update Version” button to update the latest software on
the Network server manually.
ꔛ You cannot open NetCast while the
software is being updated.
ꔛ
Picture Test/Sound Test
This function is a customer support function that can execute picture and sound tests.
ꔑ Picture Test
□ Sound Test
? Do you have a problem in this test
screen?
□ Product/Service Info.
□ Network Test
Yes
No
Close
□ Software Update
□ Picture Test
ꔑ Sound Test
? Do you have a sound problem in this
screen?
□ Product/Service Info.
□ Network Test
Close
1
MENU
2
3
4
BACK
EXIT
RED
Select Customer Support.
ENTER
Select Picture Test or Sound Test.
ENTER
Select Yes.
Yes
No
watching TV / channel control
□ Software Update
Return to the previous menu.
Return to TV viewing.
69
WATCHING TV / CHANNEL CONTROL
Product/Service Info.
This function shows support and product information.
Customer Service Center can differ by country.
watching TV / channel control
70
1
MENU
2
3
BACK
EXIT
RED
Select Customer Support.
ENTER
Select Product/Service Info..
You can check the various
product/Service infomation
based on your model.
Return to the previous menu.
Return to TV viewing.
Network Test
Check the newtwork status.
Network Status
□ Picture Test
TV
□ Sound Test
Network connecting
□ Product/Service Info.
ꔑ Network Test
Close
Setting
1
MENU
2
3
ENTER
RED
Select Customer Support.
ENTER
Select Network Test.
Test
Close
watching TV / channel control
□ Software Update
Check the newtwork status.
71
WATCHING TV / CHANNEL CONTROL
Simple Manual
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
watching TV / channel control
72
1
2
3
3
ENTER
ENTER
Select Home Menu.
ENTER
Select Simple Manual.
ENTER
Select the part of the manual you
would like to see.
ENTER
Select Exit.
RED: Go to the Index page.
ꔛ BLUE: Play the Simple Manual automatically or manually.
ꔛ
Channel Setup
* The Digital broadcasting (DTV, Cable DTV) is not available for Philippines.
Auto Scan (Auto Tuning)
Channel
ꔂ Move
ꔉ Enter
• Auto Tuning
• Manual Tuning
• Channel Edit
ꔉ
ꔡ
Channel
• Auto Tuning
• Manual Tuning
ꔂ Move
ꔉ Enter
Antenna
Cable
• Channel Edit
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Start
Close
1
2
3
4
MENU
Select Channel.
ENTER
Select Auto Tuning.
ENTER
Select Start.
ENTER
5
BACK
EXIT
Run Auto tuning.
watching TV / channel control
Automatically finds all channels available through antenna or cable inputs, and stores them in memory
on the channel list.
Run this function if you change your residence or move the TV.
Auto Tuning memorizes only the channels available at the time.
The TV will ask for a password if
parental control has been activated
(Lock Menu). Use the password you
set up in the Lock Menu to allow a
channel search.
ꔛ The maximum number of channels
the TV can store is 1000.
ꔛ Found channels are grouped in the
order of DTV, TV, Cable DTV and
Cable TV.
ꔛ
Return to the previous menu.
Return to TV viewing.
73
WATCHING TV / CHANNEL CONTROL
Add/Delete Channel (Manual Tuning)
When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal
strength monitor to see the quality of the signal being received.
watching TV / channel control
Channel
ꔉ Enter
• Auto Tuning
• Manual Tuning
• Channel Edit
Channel
• Auto Tuning
ꔉ
ꔀ
• Manual Tuning
• Channel Edit
ꔂ Move
◀
ꔉ Enter
▶
DTV
Select channel type and RF-channel
number.
2
Channel
DTV 2-1
• Signal Strength
• Signal Quality
88%
88%
Delete
Close
1
2
3
MENU
Select Channel.
ENTER
Select Manual Tuning.
ENTER
Select DTV, TV, Cable DTV,
or Cable TV.
4
Select channel you want to
add or delete.
5
ENTER
6
BACK
EXIT
74
ꔂ Move
Select Add or Delete.
Return to the previous menu.
Return to TV viewing.
The TV will ask for a password if
parental control has been activated
(Lock Menu). Use the password you
set up in the Lock Menu to allow a
channel search.
ꔛ The maximum number of channels
the TV can store is 1000.
ꔛ
Channel Editing
The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel
Edit List are displayed in blue.
Channel Edit
Channel
ꔂ Move
• Auto Tuning
• Channel Edit
2
3
Select Channel.
ENTER
Select Channel Edit.
ENTER
Select a channel.
BLUE
YELLOW
ENTER
CH
P
A
G
E
5
BACK
EXIT
A
TV
Page 1/1
Cable DTV
Cable TV
5-1
7-1
ꔠ
ꔉ
MENU
4
DTV
3-1
• Manual Tuning
1
Favorite Group :
ꔉ Enter
ꔉ CH.Change
ꘂ Favorite Ch.
ꔂ Navigation
ꘃ Page Change
ꔛ
� Favorite Ch. Group
ꕉ Previous
ꔅ Block/Unblock
ꔅ Add/Delete
Keep pressing the ꕌ button and use
the < or > buttons to move between
DTV, TV, Cable DTV and Cable TV.
watching TV / channel control
When a channel number is deleted, it means that you will be unable to select it using CH∧∨button
during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the
NUMBER buttons or select it in the Channel Edit menu.
Add or delete a channel.
Block or unblock the channel.
You can block/unblock channels even if
you select “Lock system-Off” in the LOCK
menu.
Switch to the chosen channel number.
Move the pages when the channel list is
too long.
Return to the previous menu.
Return to TV viewing.
75
WATCHING TV / CHANNEL CONTROL
Channel List
You can check which channels are stored in the memory by displaying the channel list.
Channel List
Home Menu
Quick Menu
watching TV / channel control
Channel List
3-1
DTV
4-1
ꔒꔉ
Netcast
Screen Remote
ꔅ Ch.Edit
ꘂ Favorite List
1
2
3
76
DTV
ENTER
ENTER
ꕉ Exit
Select Channel List.
ENTER
Select a channel you want to switch.
BLUE
Tune to the “CHANNEL menu Channel Edit”.
ENTER
Select Exit.
This padlock is displayed
when the channel is locked
with parental control.
Favorite Channel Setup
Favorite Channels are a convenient feature that lets you quickly select channels of your choice without
waiting for the TV to select all the in-between channels.
Quick Menu
Channel List
DTV
3-1
DTV
4-1
◀
ꔒꔉ
ꔊꔋFavorite Ch. Group
▶
Group A
DTV
3-1
DTV
4-1
ꔉ
Netcast
Screen Remote
ꔅ Ch.Edit
ꘂ Favorite List
1
2
3
4
5
6
ENTER
ENTER
ꕉ Exit
Select Channel List.
ENTER
Select Favorite List.
ENTER
Select your desired favorite channel
group from A to D.
ENTER
Select your desired channel.
ENTER
Select Ch.Reg to register or cancel
the current channel in favorite channel list.
ENTER
Select Exit.
ꔛ
ꔅ Ch.Reg.
ꔅ Ch.Edit
LIST Channel List
ꔅ
ꕉ Exit
watching TV / channel control
Favorite List
Channel List
Home Menu
You can also setup Favorite List in
the CHANNEL menu - Channel Edit.
77
WATCHING TV / CHANNEL CONTROL
Channel Information
ꔖ DTV 8-1 CNN
ꔀ Ch. Change
▶ Next
ꔉ Watch
ꕯ Exit
Brief Info Title Test...
watching TV / channel control
10:10 AM
No information
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
with regular and special guests.
Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking,
�
Displaying Channel Information
1
INFO
2
Show the current channel program Information on the screen.
Show a previous or next channel’s program information
3
EXIT
78
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V
Return to TV viewing.
ꔅ Up
ꔅ Down
Channel Brief Information
Brief Info shows the present screen information.
1
Shows the current channel’s brief info screen.
ENTER
Return to TV viewing.
6
3
8-1
ꔖ DTV
1
4
Brief Info Title Test...
10:10 AM
ꘋꔫ
CNN
5
Sun, Feb 21, 2010 10: 40 AM
11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V
Next - 11:40 AM
News
ꔥ
Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio.
ꔯ
Caption : The program contains one or more caption services.
Use the Q.MENU menu to select wanted Closed caption.
ꔨ
Dolby Digital: The program contains a Dolby Digital audio
signal in TV and HDMI input source.
ꔶ
The original aspect ratio of the video is 4:3
ꔷ
The original aspect ratio of the video is 16:9 (wide)
480i
480p
720p
1080i
1080p
ꔒ
The
The
The
The
The
video
video
video
video
video
resolution
resolution
resolution
resolution
resolution
2
is
is
is
is
is
1
Program title
2
Day, Month, Year,
watching TV / channel control
2
ENTER
Present time
3
Program start time
4
Program progress
bar
5
Program finish
time
6
Banner information
720x480i
720x480p
1280x720p
1920x1080i
1920x1080p
V-Chip: The program contains V-Chip information. Refer to
the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex),
V (Violence), FV (Fantasy Violence)
79
WATCHING TV / CHANNEL CONTROL
Input List
Only these input signals which are connected to a TV can be activated and selected.
Simple Manual
Home Menu
Quick Menu
Pointer
Exit
Today
Today
Today
watching TV / channel control
30
30
30
30
Today
Channel List
SIMPLINK
INPUT
Netcast
NETCAST
MY MEDIA
GAME/SCHEDULE Quick Menu
Screen Remote
i.e)
Input List
ꔂ Move
TV
USB1
USB2
AV 1
AV 2
Component1
Component2
RGB-PC
HDMI1
HDMI2
HDMI3
HDMI4
� Input Label
1
ENTER
2
3
4
ꔉ Enter
ENTER
Select Home Menu.
ENTER
Select INPUT.
ENTER
Select the desired input source.
ENTER
Select Exit.
When new external device is connected, this popup
menu is displayed automatically.
If selecting Yes, you can select input source that you
want to appreciate.
ꔛ But, when selecting “Simplink - On”, popup menu for
HDMI input will not be displayed.
Disconnected inputs are inactive
(grayed out)
ꕉ Exit
TV: Select it to watch over-the-air,
cable and digital cable broadcasts.
ꔛ USB: Select it to use movie, photo, or
music files.
ꔛ AV: Select them to watch a VCR or
other external equipment.
ꔛ Component: Select them to watch
DVD or a Digital set-top box.
ꔛ RGB-PC: Select it to view PC input.
ꔛ HDMI: Select them to watch high
definition devices.
ꔛ
ꔛ
80
AV1
New external input is connected.
Do you want to use this?
Yes
No
Input Label
This indicates which device is connected to which input port.
Simple Manual
Quick Menu
30
30
30
30
Today
SIMPLINK
Netcast
Screen Remote
INPUT
NETCAST
◀
AV2
◀
▶
Component1
◀
▶
Component2
◀
▶
RGB-PC
◀
▶
TV
USB1
USB2
AV 1
AV 2
Component1
Component2
RGB-PC
HDMI1
HDMI2
HDMI3
HDMI4
4
5
� Input Label
ENTER
ꔉ Enter
▶
AV1
VCR
ꔂ Move
Close
3
GAME/SCHEDULE Quick Menu
Input List
ꔍ
2
MY MEDIA
i.e)
Input Label
ENTER
Exit
Today
Today
Today
Channel List
1
Pointer
Select Home Menu.
ENTER
Select INPUT.
ENTER
Select Input Label.
ENTER
Select the desired input source and
then select ◀ ▶ to choose the input
label.
ENTER
Select Exit.
ꔛ
watching TV / channel control
Home Menu
ꕉ Exit
You can also select the Input label
using the BLUE button on the TV
remote control.
81
WATCHING TV / CHANNEL CONTROL
Reset to Factory Default (Initial Setting)
This function resets the TV to factory default and erases all stored channels.
watching TV / channel control
OPTION
ꔉ Enter
• Language
• Caption
2
4
• Caption
ꔉ Enter
: Off
ꔉ
ꔀ
!
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
MENU
Select Option.
ENTER
Select Initial Setting.
ENTER
Select Yes.
ENTER
ꔂ Move
• Power Indicator
• Initial Setting
1
OPTION
• Language
: Off
• Power Indicator
3
82
ꔂ Move
TV turns off automatically and starts
factory reset.
All user settings and channel settings will
be reset. Still continue?
Yes
No
When selecting “Lock System - On”
in the LOCK menu, the message to
enter the password appears.
ꔛ If you forget your password, press
“0-3-2-5” on the remote control.
ꔛ
MODE SETTING
Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
ꔂ Move
ꔉ Enter
• Language
• Caption
OPTION
ꔂ Move
• Language
: Off
• Caption
• Power Indicator
i Selecting the environment.
Choose the setting mode you want.
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
ꔉ Enter
• Set ID
:1
• Mode Setting
: Home Use
Select [Home Use] when setting TV up
in-home. You can adjust picture quality
accordingly through Picture Mode menu
option.
Home Use
Store Demo
• Demo Mode
Off
Close
Only LED LCD TV for USA/Canada
1
2
3
MENU
Select OPTION.
ENTER
Select Mode Setting.
ENTER
Select Home Use.
4
BACK
EXIT
Return to the previous menu.
“Store Demo” Mode is only intended
for use in retail environments.
Customers can adjust the “Picture
menu - Picture mode” manually while
inspecting the TV, but the TV will
automatically return to preset instore mode after 5 minutes.
ꔛ “Store Demo” Mode is an optimal
setting for displaying at stores. “Store
Demo” mode initializes the TV to set
the image quality.
ꔛ
WATCHING TV / CHANNEL CONTROL
OPTION
Return to TV viewing.
83
WATCHING TV / CHANNEL CONTROL
Demo Mode
Displays a slide show to explain the various feature of this TV.
OPTION
ꔉ Enter
watching TV / channel control
• Caption
OPTION
ꔂ Move
ꔉ Enter
• Language
• Language
• Caption
: Off
i Selecting the environment.
Choose the setting mode you want.
: Off
• Power Indicator
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔠ
ꔉ
Select [Store Demo] for in-store dsplay. For use
in-home, select [Home Use].
• Set ID
:1
• Mode Setting
: Store Demo
Home Use
Store Demo
• Demo Mode
Off
Close
1
2
3
MENU
Select Option.
ENTER
Select Mode Setting.
ENTER
Select Store Demo.
4
ENTER
5
EXIT
84
ꔂ Move
Select On.
Return to TV viewing.
After a while, Demo Mode. starts.
If you want to stop the demo, press any
button (Except VOL +, - and MUTE button).
ꔛ
This feature is disabled in “Home Use”.
AV Mode
AV Mode toggles through preset Video and Audio settings.
Press button to run the selected
function.
Home Menu
Quick Menu
Channel List
Netcast
Screen Remote
1
2
3
ENTER
ENTER
Select Screen Remote.
ENTER
Select AV MODE.
ENTER
Select AV MODE repeatedly to select
your desired menu option.
Energy
Saving
Mode
AVAVMODE
INPUT
FAV
Q.MENU
SIMPLINK
Close
Enter
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
If you select “Cinema / ꔧ Cinema”
in AV mode, Cinema / ꔧ Cinema
will be selected both for “PICTURE
menu - Picture Mode” and “AUDIO
menu - Sound Mode” respectively.
ꔛ If you select “Off” in AV mode, the
“Picture Mode” and “Sound Mode”
return to previous selected value.
ꔛ Off: Disables the AV MODE.
ꔛ Cinema / ꔧ Cinema: Optimizes
video and audio for watching movies.
ꔛ Sport: Optimizes video and audio for
watching sports events.
ꔛ Game: Optimizes video and audio for
playing games.
When playing a video game using
PlayStation or Xbox, it is recommended to use the Game mode.
When in Game mode, functions
related to picture quality will be optimized for playing games.
ꔛ Press the AV MODE button repeatedly to select your desired menu
option.
ꔛ
watching TV / channel control
Screen Remote
85
WATCHING TV / CHANNEL CONTROL
Game/Schedule
World Time
This function operates only if the current time has been set.
Simple Manual
Exit
watching TV / channel control
Today
Today
Today
Quick Menu
30
30
30
Today
Channel List
SIMPLINK
INPUT
NETCAST
MY MEDIA
GAME/SCHEDULE
Quick Menu
Netcast
Screen Remote
GAME/SCHEDULE
World Clock
USA
Eastern, USA
Washington D.C
2010/01/01(Fri.) 00:00
� Move
1
2
3
4
5
86
Pointer
Home Menu
� Select Region
ENTER
ꔅ City List
ENTER
2010/01/01(Fri.)
00:00
ꕉ Previous
WORLD TIME
SCHEDULE
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
ENTER
Select GAME/SCHEDULE.
ENTER
Select World Time.
ENTER
Select a desired city.
You can check the world time.
ENTER
Select Exit.
HOLE IN ONE
WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
ꕯ Exit
ꕯ Exit
Select Home Menu.
JUMP
ꔛ
The day light saving is not shown at
the world clock.
Schedule
This function operates only if the current time has been set.
Simple Manual
Pointer
Exit
Today
Today
Today
Quick Menu
30
30
30
Today
Channel List
SIMPLINK
INPUT
NETCAST
MY MEDIA
GAME/SCHEDULE
Quick Menu
Netcast
Screen Remote
GAME/SCHEDULE
Schedule
� Navigation
Sun.
Mon.
Tue.
Wed.
Thu.
� Add/Edit
Fri.
Sat.
WORLD TIME
SCHEDULE
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE
WHACK A MOLE
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
Jul. 4
watching TV / channel control
Home Menu
Lunar May 23
ꔅ List view
ꔅ Picture change
∧
CH
Previous Month
CH
∨
Next Month
ꕯ Exit
ꕯ Exit
1
2
3
4
ENTER
ENTER
Select Home Menu.
ENTER
Select GAME/SCHEDULE.
ENTER
Select Schedule.
ENTER
Select a desired date.
You can check the schedule.
87
WATCHING TV / CHANNEL CONTROL
Schedule Registration
i.e)
watching TV / channel control
Add Schedule
Sun, Jul. 4
Grandfather
No
repeat
∧
CH
5
6
8
Solar/Lunar
Solar
� Navigation
Birthday
Notice
D-day
The day
Add a
D-Day
Previous Step
Sun.
Grandmother
Mon.
Tue.
Wed.
Thu.
� Add/Edit
Fri.
Sat.
Father
Son
Daughter
Memorial
Anniversary
Custom
Event
Father Birthday
Repeat
SCHEDULE
Person
Lunar 5.23
Mother
7
88
1/2
CH
∨
Test
Next Step
Travel
Meeting
ꔅ Save
Jul. 4
Custom
ꕉ Cancel
ENTER
Select the desired menu option.
ENTER
The icon is displayed.
ENTER
Select List View to use schedule.
ENTER
Select Exit.
Lunar May 23
ꔅ List view
ꔅ Picture change
∧
CH
Previous Month
CH
∨
Next Month
ꕯ Exit
Game
Allows you to enjoy the games installed on the TV.
Simple Manual
Pointer
Exit
Today
Today
Today
Quick Menu
30
30
30
Today
Channel List
SIMPLINK
INPUT
NETCAST
MY MEDIA
GAME/SCHEDULE
Netcast
Screen Remote
GAME/SCHEDULE
WORLD TIME
SCHEDULE
SUDOKU
JIGSAW
INVADER
URGENT SURVIVAL
JUMP
HOLE IN ONE
WHACK A MOLE
Quick Menu
watching TV / channel control
Home Menu
COOKING BURGER BALLOON HUNTER SAVING CRYSTAL
ꕯ Exit
1
2
3
4
ENTER
ENTER
Select Home Menu.
ENTER
Select GAME/SCHEDULE.
ENTER
Enter the selected game mode.
ENTER
Select Exit.
89
WATCHING TV / CHANNEL CONTROL
SIMPLINK
SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices
with the
logo are fully supported.
SIMPLINK can be turned on and off in the user menus.
watching TV / channel control
Home Menu
Simple Manual
Channel List
Exit
Today
Today
Today
30
30
30
Today
Netcast
SIMPLINK
Screen Remote
NETCAST
INPUT
MY MEDIA
ꔉ Enter ꕉ Exit
◀ ◀
▶ ▶
On
Watch TV
◀ DISC 1
▶
◀ VCR 1
▶
HDD/DVD-R
HD HT
HDD Recorder
◀ Speaker
TV Speaker
ꕉ Exit
1
2
3
4
ENTER
ENTER
Select Home Menu.
ENTER
Select SIMPLINK.
ENTER
Select On.
ENTER
Select the desired device.
5
ENTER
90
Pointer
Quick Menu
Control connected AV devices.
▶
GAME/SCHEDULE Quick Menu
TV viewing: Switch to the previous TV
channel regardless of the current
mode.
2 DISC playback: Select and play discs.
When multiple discs are available, the
disc devices are conveniently displayed
at the bottom of the screen.
3 VCR playback: Control the connected
VCR.
4 HDD Recordings playback: Control
recordings stored in HDD.
5 Audio Out to Home Theater speaker/
Audio Out to TV: Select Home Theater
speaker or TV speaker for Audio Out.
1
ꔉ Enter ꕉ Exit
◀ ◀
Watch TV
2
◀ DISC 1
▶
►When no device is connected (displayed in gray)
3
◀ VCR 1
▶
►Selected Device
HDD/DVD-R
HD HT
4
HDD Recorder
5
◀ Speaker
TV Speaker
▶
►When a device is conected (displayed in bright
color)
ꕉ Exit
SIMPLINK Functions
Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media
without additional settings.
ꔛ Select AV device: Enables you to select one of the AV devices connected to the TV.
ꔛ
watching TV / channel control
1
▶ ▶
On
Disc playback: Control connected AV devices by pressing the ꕌꕍ< >, ENTER, ꕖ, ꕗ, ꕘ, ꕚ and ꕙ buttons.
ꔛ Power off all devices: When you power off the TV, all connected devices are turned off.
ꔛ Switch audio-out: Offers an easy way to switch audio-out.
ꔛ Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play,
The TV will automatically turn on.
Note: To operate SIMPLINK, an High Speed HDMI cable with *CEC function should be used. (*CEC:
Consumer Electronics Control).
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does
not provide this function)
ꔛ
!
?
! NOTE
►Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of
the SIMPLINK device with the HDMI cable
?
►When
you switch the Input source with the INPUT button on the remote control, the SIMPLINK
device will stop.
►When you select a device with home theater functionality, the sound output automatically switches
to the home theater speakers and the TV speakers are turned off.
►If a connected SIMPLINK home theater system doesn’t play the audio from the TV, connect the
DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the
back of the SIMPLINK device with an OPTICAL cable.
91
3D
3D Imaging
Imaging (For LED LCD TV, 50/60PX950)
3D TECHNOLOGY
!
This
! TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such
as a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate
pictures formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in
3D format.
?
?
Viewing
3D Imaging
Warning
3D Imaging
►When viewing 3D imaging, watch the TV from
an effective viewing angle and within the appropriate distance. The appropriate angel and
distance are provided on the next page of this
manual. If you exceed this viewing angle or distance, you may not be able to view the 3D imaging. Furthermore, the 3D imaging may not
display if it is viewed while you are lying down
(For LED LCD TV).
►If you watch the 3D imaging too closely or for a
long period of time, it may harm your eyesight.
►Watching the TV or playing video games that
incorporate 3D imaging with the 3D glasses
for a long period of time can cause drowsiness,
headaches or fatigue to you and/or your eyes. If
you have a headache, or otherwise feel fatigued
or drowsy, stop watching the TV and take a rest.
►Pregnant woman, seniors, persons with heart
problems or persons who experience frequent
drowsiness should refrain from watching 3D TV.
►Some 3D imaging may cause you to duck or
dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near
fragile objects or near any objects that can be
knocked over easily.
► Please prevent children under the age of 5 from
watching 3D TV. It may affect their vision development.
►Warning for photosensitization seizure:
Some viewers may experience a seizure or epilepsy when exposed to certain factors, including
flashing lights or images in TV or video games.
If you or anybody from your family has a history
of epilepsy or seizure, please consult with your
!
?
92
doctor before watching 3D TV.
Also certain symptoms can occur in unspecified conditions without any previous history. If
you experience any of the following symptoms,
immediately stop watching the 3D imaging and
consult a doctor: dizziness or lightheadedness,
visual transition or altered vision, visual or facial
instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience,
confusion or disorientation, loss of directional
sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these
symptoms as they may be more sensitive to the
effects of watching 3D TV.
Risk of photosensitization seizure can be reduced with the following actions.
- Take frequent breaks from watching 3D TV.
- For those who have vision that is different in
each eye, they should watch the TV after taking vision correction measures.
- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV
- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.
- Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV.
- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness of
your situation before moving.
! NOTE
►To watch the TV in 3D, you must put on your
3D glasses. For best results, you should wear
LG Brand 3D glasses. The 3D imaging may not
? display properly when using another brand of
3D glasses. Please see the 3D glasses manual
for instructions on how to use the 3D glasses.
►After powering on the TV, a few seconds may be
needed for your TV to calibrate.
►It may take a moment for you to see the 3D
imaging if you look away from the TV and then
revert your eyes back to the 3D program.
►The TV may flicker slightly if the 3D imaging is
displayed under 3 wavelength fluorescent light
(50 Hz - 60 Hz) or magnetic fluorescent lamp
(50Hz - 60 Hz). In such instances, it is recommended to turn the lights off.
►If there is an obstacle between the TV and the
3D glasses, the 3D imaging may not display
properly.
►Do not use the TV in close proximity to other
electronic equipments and IR equipments.
►In Analog TV, 3D Imaging does not work.
►When watching 2D images, it is recommended
to take off the 3D glasses. If you watch 2D images with the 3D glasses on, you may see distorted images.
!
!
?
?
When using 3D Glasses
CAUTION
3D Imaging
►Refer to the 3D glasses manual for operating instructions.
►Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.
►Do not store the 3D glasses in hot or cold locations.
►Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
►Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
Shake off any dust before using the cloth since the glasses are easily scratched.
3D Imaging viewing range
TV
TV size, viewing angle & other circumstances may change the
viewing distance and the angle of view.
Viewing
Distance
2m-7m
(6.5 ft - 22.9 ft)
Viewing
Angle
120º (When the viewing distance is 2 m (6.5 ft))
2m
60 ◦ 60 ◦
2m
7m
93
3D ImagIng
WaTCHIng 3D ImagIng
1 Play the video produced in 3D.
Refer to the following for the supported imaging.
Signal
Resolution
Horizontal
Frequency (kHz)
720p
1280x720
45.00
1080i
Vertical
Frequency (Hz)
Top & Bottom, Side by Side
HDMI (V. 1.4 with HDMI 3D) Frame Packing
60
33.75
Top & Bottom, Side by Side
Top & Bottom, Side by Side, Checker Board
Single Frame Sequential
67.50
3D ImagIng
HDMI Input
1080p
1920x1080
27.00
24
Top & Bottom, Side by Side, Checker Board
HDMI (V. 1.4 with HDMI 3D) Frame Packing
33.75
30
Top & Bottom, Side by Side
Checker Board
Top & Bottom, Side by Side
Checker Board, MPO (Photo)
USB Input
1080p
1920x1080
33.75
30
Component
(For Plasma
TV)
720p
1280x720
45.00
60
1080i
1920x1080
33.75
60
DTV
Playable 3D video format
Top & Bottom, Side by Side
Signal
Playable 3D video format
720p, 1080i
Top & Bottom, Side by Side
Media contents and a player need to support HDMI (V. 1.4 with HDMI 3D) Frame Packing to play in 3D.
Video, which is input as HDMI (V. 1.4 with HDMI 3D) Frame Packing format, is switched into the 3D screen
automatically.
2
After selecting the shape as shown in the screen on TV,
wear the 3D glasses.
ENTER
3D
To turn on 3D Mode, select this icon.
ꔁMove
�Enter
ꕯ Exit
Top & Bottom
or
Side by Side
ENTER
3D
Checker Board
Frame Sequential
Select 3D video or 2D video.
After selecting the shape as shown in the screen on TV, wear the 3D
glasses.
* For Plasma TV
3D video: Select it to view the
3D imaging.
ꔛ 2D video: Select it to view the
2D imaging.
To turn on 3D Mode, select this thumbnail.
3D video
ꔁMove
94
2D video
�Enter
Changed from
2D imaging to
3D imaging
ꔛ
ꕯ Exit
Top & Bottom
Side by Side
Checker Board
Frame Sequential
3
ENTER
or
Select Setting Left/right or Left/right image change.
L/R SELECT
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
or
Enter
End 3D Video
or
Enter
Cancel
ꔅ Left/Right image change
ENTER
Select Left/right or right/Left.
Select the screen with 3D video with better visibility.
ꔅ Setting Left/Right
� Left/Right
□ Right/Left
3D
3D effect
◀
10
or
End 3D Video
Enter
▶
3D mode setting
or
End 3D video
Enter
◀ Left/Right ▶
3D ImagIng
ENTER
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D
view.
* In case of this OSD (On Screen
Display), you can adjust the 3D effect
button.
setting with using
ꔅ Setting Left/Right
4
Cancel
ꔅ 3D effect setting : 10
� Enter
3D
or
End 3D video
ꕯ Exit
5
!
?
3D
The 3D imaging mode is changed to the 2D imaging mode.
! noTE
► Some menus may not work while watching the
TV in 3D.
► The 3D imaging mode is disabled automatiwhen switching DTV channels.
? cally
►
The screen may not be displayed properly if
you view 2D DTV images in 3D imaging
mode.
►3D effect can be seen when 3D Mode is
selected appropriately for the 3D input signal
supplied to the TV.
► For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
► To enable the 3D imaging mode, you can also
press the ENTER button on the Magic Motion
remote control.
* For LED LCD TV
► If you select 3D mode, "Power indicator" is
turned off automatically.
► While watching 3D imaging, you cannot adjust
video/audio settings using the menu.
► You can only choose "Standard → Cinema →
Game" with the aV moDE button on remote
control. aV mode is set as Standard while
playing in 3D.
► Energy Saving is disabled while playing in 3D.
► If you'd like to play the BGM using *.mpo
file(3D camera file), In advance, the contents
path for BGM should be set on full-sized
photo view screen which isn't *.mpo file(3D
camera file).
nOTES FOr VIEWIng 3D ImagE WITH 3D BrOaDCaSTIng (* In analog TV, 3D Imaging does not work.)
When switching the 2D image display to the
3D image display with the 3D button on the
remote control, the overlapped image may be
displayed.
ꔛ
ꔛ
Disable the 3D imaging mode with the 3D button.
The 3D imaging mode is disabled automatically
if you change the channel.
If the screen is divided into
left/right or top/bottom when
you change the channel
ꔛ
This channel supports the 3D imaging mode.
Select the 3D imaging type displayed on the
screen by pressing the 3D button on the remote
control.
If your eyes are soaring or the screen looks
blurry while viewing 3D images
ꔛ
Press the L/r SELECT button on the remote control and select L/R or R/L, which you find better
for viewing 3D images.
95
MY
MY Media
MEDIA
Entry Mode
The My Media menu will open automatically when you insert a USB drive. My Media can also be
accessed by choosing My Media in the user menu.
After choosing the desired type of media, choose a device to open files from. The options are: USB
device, or DLNA.
Home Menu
Simple Manual
Pointer
Exit
Quick Menu
My Media
Channel List
Today
Today
Today
Today
30
30
30
30
Today
Netcast
SIMPLINK
NETCAST
INPUT
MY MEDIA
Screen Remote
GAME/SCHEDULE Quick Menu
Please select the device.
USB Label
MY MEDIA
USB Label
DLNA
Movie List
Photo List
Music List
� Device Selection
ꔅ Search
1
2
3
4
ENTER
ENTER
Select Home Menu.
ENTER
Select MY MEDIA.
ENTER
Select Movie List, Photo List or
Music List.
ENTER
Select the desired device.
BLUE
Search other network device.
ꔛ
This TV can view JPG image files, HD DivX
files and play MP3 audio files.
When removing the USB device
Select the USB Device menu before
removing the USB device.
1
2
3
96
� Previous
ENTER
ENTER
Select Quick Menu.
ENTER
Select USB device.
ENTER
Select Eject.
Connection Method
USB Connection
Memory Key
Precautions when using the USB device
►Only a USB storage device is recognizable.
►Connecting a USB storage device through a USB hub is not supported.
►A USB storage
AV IN 2 device which uses its own driver may not be recognized.
►The recognition speed of a USB storage device may depend on each device.
►Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
►Only use a USB storage device which has normal music files, image files, or movie files.
►Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system provided with the Windows operating system. Others may not be recognized.
►Some USB storage devices require a power adapter. The power adapter must be connected in
order to be seen by the TV.
►If a device is not recognized by the TV, try a different cable. Excessively long cables are not supported.
►Some USB storage devices may not be supported or operate properly.
►Please backup important files because data on USB device could be damaged. Data management
is consumer's responsibility and as a result, the manufacturer does not cover data damage.
►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can
use up to 4 partitions or USB memory devices.
►File alignment method of USB storage device is similar to Window XP and file names can be up
to 100 English characters.
►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB
memory.
►If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and
on again to make it work properly. Refer to the user manual of the USB external hard disk.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►Maximum of 999 folders or files can be recognized under one folder.
►If there are too many folders and files in one folder, it may not operate properly.
My Media
VIDEO L(MONO) AUDIO R H/P
IN 4
USB IN 1
USB IN 2
1 Connect the USB device to the USB IN jack on the side of TV.
97
MY Media
DLNA
About DLNA
My Media
This TV can display and play many types of movie, photo and music files from your DLNA server and
has been certified by DLNA for photos.
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics,
computing industry and mobile device companies. Digital Living provides consumers with easy sharing
of digital media through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA
server software or other DLNA compatible device is connected to this TV, some setting changes of
software or other devices may be required. Please refer to the operating instructions for the software or
device for more information.
Please refer to pages 99 ~ 121 for additional information on supported file types and other instructions.
!
?
98
! NOTE
►The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for
sharing files and folders to this TV.
►The
supplied Nero MediaHome 4 Essentials software does not support following functions:
?
Transcoding, Remote UI, TV control, Internet services and Apple iTunes
►This manual explains operations with the English version of Nero MediaHome 4 Essentials as
examples. Follow the explanation referring to the actual operations of your language version.
►If there are too many folders and files in one folder, it may not operate properly.
►For the DLNA option, use the Nero MediaHome programme that is provided with the TV. However, we
cannot guarantee that third party program will work perfectly.
►You can select a channel while viewing the small preview channel list on your TV screen.
►Check your network settings when the DLNA option does not work properly.
►If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may
not work properly. In this case, exit Nero Media Home and restart the programme. You can download the latest version of Nero Media Home by clicking the question mark at the bottom-left of
the program.
►When the network is unstable, the device may be slower or may need to load during playback.
►When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported.
►When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the
original.
►When more than one TV is connected to a single server in DLNA mode, a file may not play properly,
depending on the server performance.
►If the play time information is not provided by the server, it is displayed as "--:--:--."
►When using Movie List, DRM/*.tp/*.trp files in the DLNA server cannot be played.
►When using Photo List, *.MPO files in the DLNA server cannot be played.
►DLNA operation may not work properly according to the AP manufacturers.
Installing Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.
1
Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
An installation wizard will walk you through the quick and uncomplicated installation process.
2
Close all Microsoft Windows programs and exit any anti-virus software that may be running.
3
Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
4
Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard appears.
5
Click the Next button to display the serial number input screen.
Click Next to go to the next step.
6
If you accept all conditions, click I accept the License Conditions check box and click Next.
Installation is not possible without this agreement.
7
Click Typical and click Next. The installation process is started.
8
If you want to take part in the anonymous collection of data, select the check box and click the
Next button.
9
Click the Exit button to complete the installation.
My Media
Requirement PC system before you install Nero MediaHome 4 Essentials
ꔛ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP
Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
ꔛ Windows Vista® 64-bit edition (application runs in 32-bit mode)
ꔛ Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone
ꔛ 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
ꔛ Memory: 256 MB RAM
ꔛ Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and
16-bit color settings
ꔛ Windows® Internet Explorer® 6.0 or higher
ꔛ DirectX® 9.0c revision 30 (August 2006) or higher
ꔛ Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)
99
MY Media
Sharing files and folders
After installing Nero MediaHome, you must add folders you wish to share.
My Media
100
1
Double-click the Nero MediaHome 4 Essentials icon on the desktop.
2
Click Network icon on the left and define your network name in the Network name field. The
Network name you enter will be recognized by your TV.
3
Click Shares icon on the left.
4
Click Local Folders tab on the Shared screen.
5
Click Add icon to open the Browse Folder window.
6
Select the folder containing the files you want to share. The selected folder is added to the list of
shared folders.
7
Click Start Server icon to start the server.
!
! NOTE
?
►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders
tab and click Rescan Folder at the More button.
?
►Visit
www.nero.com for more information and software tools.
Playing back shared contents
You can display and play movie, photo and music content stored on your computer or other DLNA
media servers.
1 Start the server on your computer or other device that connected on your home network.
2
3
!
?
Select MY MEDIA.
ENTER
Select Movie List, Photo List or Music List.
ENTER
Select the DLNA.
Depending on the media server, this TV may need to get the permission from
the server.
If you want to re-scan available media server, press blue color button.
My Media
4
MENU
! NOTE
►To play the file on the media server, the TV and the media server must be connected to the
same access point.
?
►Because
the compatibility and available playback functions on the My Media menu are tested
on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and
playback functions on the My Media may differ depending on media servers.
►The file requirements on this page are not always compatible. There may have some restrictions
by file features and media server’s ability.
►Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.
►Movie thumbnail is not supported in DLNA Movie.
►If there is an unplayable music file in the My Media menu, the TV will skip the file and play next
file.
►The file information indicated on the screen may not always correct for music and movie files in
My Media menu
►This TV only supports movie subtitle files supplied by Nero MediaHome 4.
►The subtitle file name and movie file name have to be the same and located at the same folder.
►If subtitle files have been added after a directory has been indexed already, the user has to
remove and re-add the folder to the list of shares.
►The playback and operating quality of the My Media function may be affected by your home
network condition.
►The files from removable media such as USB drive, DVD-drive etc. on your media server may
not share properly.
►When playing the Media through DLNA connection, it does not support the DivX file play which
is protected by DRM.
►Up to 200 folders in one folder and 999 including folders and files can be recognized.
►If there are too many folders and files in one folder, it may not operate properly.
101
MY Media
Movie list
It displays all of the video files it recognizes.
The On-Screen Display on your model may be slightly different.
Supported movie file
ꔛ Resolution: under 1920 pixel (width) x 1080 pixel (height)
ꔛ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720)
ꔛ Max bitrate of playable video file: 20 Mbps (Mega bit per second)
ꔛ Bit rate of audio format: within 32 kbps to 320 kbps (MP3)
ꔛ Supported external subtitle format: *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
ꔛ Supported Internal subtitle format: only XSUB (It is the subtitle format used in DivX6 files)
My Media
102
Precautions when playing the video files
►Some user-created subtitles may not work properly.
►Some special characters are not supported in subtitles.
►HTML tags are not supported in subtitles.
►Time information in an external subtitle file should be arranged in ascending order to be played.
►Changing font and color in subtitles is not supported.
►Subtitles in languages other than one specified are not supported.
►Video files with subtitle files of 1 MB or larger may not be played properly.
►The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the
audio language is changed.
►A damaged video file may not be played correctly, or some functions may not be usable.
►Video files produced with some encoders may not be played correctly.
►If the video and audio structure of recorded file is not interleaved, the file not playback properly.
►Video with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for smooth playback.
►Video files other than the specified types and formats may not work properly.
►The movie file encoded by the GMC (Global Motion Compensation) and Qpel (Quarterpel Motion
Estimation) is not supported.
►Only 10000 sync blocks are supported within the subtitle file.
►We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
►DTS Audio codec is not supported.
►A video file more than 30GB in file size is not supported for playback.
►Playing a video via a USB connection that doesn’t support high speed may not work properly.
►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►The video file and its subtitle file must be located in the same folder.
At this time, a video file name and its subtitle file name must be identical for it to be displayed.
►When you are watching a movie via the Movie List function, you can adjust the picture with the
ENERGY SAVING and AV MODE button on the remote control. User setup for each picture mode
is not supported.
►Trick Mode does not support other functions than ꕙ if video files do not have index information.
►When playing video file using network, the Trick mode is limited to 2-times speed.
►Video file names that contain special characters may not be playable.
Supported Video Formats
File
Extensions
.asf
.wmv
Audio/
Video
Codec
VC-1 Advanced Profile
Advanced Profile@Level 3
(e.g. 720p60, 1080i60, 1080p30)
VC-1 Simple and Main Profiles
Simple Profile@Medium Level (e.g. CIF, QVGA)
Main Profile@High Level (e.g. 1080p30)
Video
Audio
Profile/Level Support
Explanation
Only streams compliant
to SMPTE 421M VC-1
standard are supported.
WMA Standard
WMA 9 Professional
DivX3.11
Video
.divx
.avi
My Media
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Global motion compensation or quarterpel
motion estimation does
not supported. Streams
using this syntax are not
supported.
MPEG-1 Layer I, II
MPEG-1 Layer III (MP3)
Dolby Digital
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-4 Part 2
Advanced Simple Profile (e.g. 720p/1080i)
Audio
AAC
AAC-LC and HE-AAC
Global motion compensation or quarterpel
motion estimation does
not supported. Streams
using this syntax are not
supported.
Video
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Most of the MKV content available is encoded by the open source
x264 codec.
AAC
AAC-LC and HE-AAC
Video
.mkv
Audio
Dolby Digital
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-2
Main Profile@High Level(e.g. 720p60, 1080i60)
VC-1
Simple Profile@Medium Level
(e.g. CIF, QVGA)
Main Profile@High Level
(e.g. 1080p30)
Advanced Profile@Level3
(e.g. 720p60, 1080i60, 1080p30)
Video
.ts
.trp
.tp
Audio
Video
.vob
Only streams compliant
to SMPTE 421M VC-1
standard are supported.
MPEG-1 Layer I, II
MPEG-1 Layer III (MP3)
Dolby Digital
AAC
.mpg
Advanced Simple Profile
(e.g. 720p/1080i)
XViD
H.264 / AVC
Audio
.mp4
.m4v
DivX4
DivX5
DivX6
AAC-LC and HE-AAC
MPEG-1
MPEG-2
Audio
Dolby Digital
MPEG-1 Layer I, II
DVD-LPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
Main Profile@High Level (e.g. 720p60, 1080i60)
Main Profile@High Level (e.g. 720p60, 1080i60)
Only streams compliant
configured properly for
TS, PS or ES
103
MY Media
Screen Components
1
2
3
ENTER
ENTER
Select Home Menu.
ENTER
Select MY MEDIA.
ENTER
Select Movie List.
My Media
1
Moves to upper level folder
Current page/Total pages
3 Current page/ total pages of
contents
4 Contents under the folder
focused on 1
5 Change to a different input.
6 Move to Photo List or Music
List.
7 Changes the number or
thumbnails displayed at a time.
8 Allows you to mark certain files.
9 Return to TV viewing.
2
1
2
Page 1/1
Movie List
Drive1
USB 1 XTICK
M1
Page 1/1
M2
M3
4
� Play
5
ꔅ To Photo List
6
ꔅ Change Numbers
7
Abnormal files are
displayed using this
graphic.
Non-supported files
are displayed using
this graphic.
104
M4
Butterfly_...
01:34:33
ꔅ Change Device
3
ꔅ Mark Mode
8
� Page Change
ꕯ Exit
9
Movie Selection
Page 1/1
Movie List
Drive1
USB 1 XTICK
M1
M2
1
ENTER
Select the target folder
or drive.
2
ENTER
Select the desired
movie title.
Page 1/1
M3
M4
Butterfly_...
01:34:33
3
� Play
ꔅ To Photo List
ꔅ Change Numbers
Play the movie file.
� Page Change
ꔅ Mark Mode
ꕯ Exit
My Media
ꔅ Change Device
ENTER
Mark Mode
Page 1/1
Movie List
Mark Mode
Drive1
USB 1 XTICK
M1
M2
1
ENTER
Select the target folder
or drive.
2
ENTER
Select Mark Mode.
3
ENTER
Select the desired
movie title.
4
ENTER
Page 1/1
M3
M4
Butterfly_...
01:34:33
� Play
ꔅ Play Marked
ꔅ Mark All
ꔅ Unmark All
ꔅ Exit Mark Mode
� Page Change
ꕯ Exit
Play
Marked
Play the first selected file. Once a movie
finishes playing, the next selected one will
be played automatically.
Mark All
Mark all files in the folder.
Unmark
All
Deselect all marked files.
Exit Mark
Mode
Enter or exit the Mark Mode.
ꔛ
Select Play Marked.
Play the marked movie
file.
It displays the current
movie status progress
bar on the bottom of
the screen.
When one or more movie files are
marked, the marked movies will be
played in sequence.
105
MY Media
Playing the Movie
� Stop playback.
� Return to normal playback.
� Paused playback. If no buttons
are pressed on the remote control
for 10 minutes after pausing, the
TV returns to the playback state.
� � Select the required speed:
x2, x4, x8, x16, x32 (backward/forward).
2 Increase or decrease the brightness of your screen.
3 Hide the menu on screen. To see
the menu again, press ENTER
button.
4 Return to the previous menu.
1
��
�
�
�
�
My Media
1
01:02:30 / 02:30:25
�
�
�
� Option
� Hide
2
ꕯ Exit
3
4
Choose options.
Set Video Play.
Set Video.
Set Audio.
Set 3D video
� Previous
Close
For LED LCD TV,
50/60PX950
1
2
106
ENTER
ENTER
Show the Option menu.
Select the desired menu option.
!
?
! NOTE
►When replaying a video file after stopping, you can play from where it stopped
? automatically.
►If you select “Yes” when playing the
same file after the video file has been
stopped, it will restart where it stopped
previously.
►If continuous series files exist within the
folder, the next file will automatically be
played. But, this excludes cases when
the Repeat function of Movie List Option
is turned “On” (Refer to page 107) or
when set as Marked Play.
Set Video Play Menu Options
Set Video Play.
◀
Full
▶
Audio Language
◀
1
▶
Subtitle Language
◀
On
▶
•Language
◀
English
▶
•Code Page
◀
Default
▶
•Sync
◀
0
▶
•Position
◀
0
▶
•Size
◀
Normal
▶
Repeat
◀
Off
▶
� Previous
1
2
Picture Size: Selects your desired
picture format for videos.
Full Mode: Files are played in full
screen mode regardless of the aspect
ratio of video.
Original Mode: Files are played
according to the aspect ratio of
video.
ꔛ Audio
Language: Changes the
Language Group of the audio for
video files. Files with a single audio
track cannot be selected.
ꔛ Subtitle Language: The subtitles can
be turned on or off.
ꔛ Language: Activated for SMI subtitles
and can select the language within
the subtitle.
ꔛ Code Page: Subtitle font selection.
When set to default, contents are
displayed in the language set in
"Option - Language - Menu
Language."
ꔛ Sync: When the video is not synchronized with the captions, it can be
adjusted by 0.5 second.
ꔛ Position: Move the location of the
subtitles.
ꔛ Size: Changes the subtitle font size.
ꔛ Repeat: Turn on/off repeat function
of movie playback. When turned on,
the file within the folder will be played
back repeatedly. When turned off, if
the next file name is similar to the
previous file, it can be played sequentially.
ꔛ
Close
ENTER
Select the desired menu option.
ENTER
Make appropriate adjustments.
Code Page
Subtitle Language Group
Supported Language
Latin1
English, Spanish, French
Korean
English, Korean
My Media
Picture Size
107
MY Media
* Image shown may differ from your TV.
Set Video Menu Options
For LED LCD TV
For Plasma TV
Set Video.
Set Video.
◀
Picture Mode
Standard
▶
Picture Mode
•Backlight
70
◀
▶
•Contrast
•Contrast
◀
▶
Standard
100
◀
▶
100
◀
▶
•Brightness
50
◀
▶
•Brightness
50
◀
▶
•Sharpness
50
◀
▶
•Color
60
◀
▶
•Color
60
◀
0
◀ R
G
▶
0
◀ W
C
▶
•Edge Enhancer
◀
High
▶
•Tint
•Noise Reduction
◀
Medium
▶
•Color Temp.
My Media
◀
•Noise Reduction
Picture Reset
▶
Low
▶
▼
� Previous
1
Close
� Previous
Close
Make appropriate adjustments.
Then, select Close.
ENTER
Set 3D video Menu Options
(For LED LCD TV, 50/60PX950
Set Audio Menu Options
Set Audio.
i.e)
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
0 ◀ L
Balance
R
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
▶
ꔉ Enter
� Previous
Close
ꔅ Setting Left/Right
3D
1
108
ENTER
Make appropriate adjustments.
Then, select Close.
3D
End 3D Video
For more information, see the 3D
Imaging section in the Owner's
Manual.
Photo list
The On-Screen Display on your model may be slightly different.
Supported photo file: *.JPG
ꔛ Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)
ꔛ Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height)
ꔛ You can play JPEG files only.
ꔛ Non-supported files are displayed in the form of predefined icon.
ꔛ An error message occurs for corrupted files or file formats that cannot be played.
ꔛ Corrupted image files may not be displayed properly.
ꔛ It may take some time to view high-resolution images in full screen.
For 47/55LX9500, 50/60X950
File
Extensions
supproted file format
jpeg
jpg
jpe
photo size
supproted file format
3D
mpo
photo size
Profile
SOF0: baseline
SOF1: Extend Sequential
SOF2: Progressive
Min: 64 x 64
Max - Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
mpo
4:3 size: 3648 x 2736
2592 x 1944
2048 x 1536
3:2 size: 3648 x 2432
My Media
2D
Item
Screen Components
1
2
3
ENTER
ENTER
Select Home Menu.
1
2
Page 1/1
Photo List
ENTER
Select MY MEDIA.
ENTER
Select Photo List.
Moves to upper level folder
Current page/Total pages
3 Current page/total pages of
contents
4 Contents under the folder
focused on 1
5 Change to a different input.
6 Move to Music List or Movie
List.
7 Changes the number or
thumbnails displayed at a time.
8 Allows you to mark certain files.
9 Return to TV viewing.
USB 1 XTICK
Drive1
P1
P2
P3
P4
Page 1/1
P5
P6
P7
P8
3
P9
4
1
� View
2
ꔅ Change Device
5
ꔅ To Music List
6
ꔅ Change Numbers
7
ꔅ Mark Mode
8
� Page Change
ꕯ Exit
9
Abnormal files are
displayed using this
graphic.
Non-supported files
are displayed using
this graphic.
109
MY Media
Photo Selection
Page 1/1
Photo List
USB 1 XTICK
Drive1
1
ENTER
Select the target folder
or drive.
2
ENTER
Select the desired photos.
Page 1/1
3
� View
My Media
ꔅ Change Device
ꔅ To Music List
ꔅ Change Numbers
ꔅ Mark Mode
ENTER
Photo file is displayed.
� Page Change
ꕯ Exit
Mark Mode
Page 1/1
Photo List
Mark Mode
Drive1
USB 1 XTICK
� View
ꔅ View Marked
110
ꔅ Mark All
ꔅ Unmark All
1
ENTER
Select the target folder
or drive.
2
ENTER
Select Mark Mode.
3
ENTER
Select the desired
photo files.
4
ENTER
Page 1/1
ꔅ Exit Mark Mode
� Page Change
ꕯ Exit
ꔛ
View
Marked
Display the selected photo.
Mark All
Mark all photos on the screen.
Unmark
All
Deselect all marked photos.
Exit Mark
Mode
Enter or exit the Mark Mode.
Select View Marked.
View the marked photo
files.
When one or more photos are
marked, you can view individual photos or a slide show of the marked
photos. If no photos are marked, you
can view all photos individually or all
photos in the folder in a slide show.
Full Screen Menu
More operations are available in full screen mode.
Page 1/1
Photo List
USB 1 XTICK
Drive1
Page 1/1
� View
ꔅ To Music List
ꔅ Change Numbers
� Page Change
ꔅ Mark Mode
My Media
ꔅ Change Device
ꕯ Exit
01_a.jpg
2008/12/10
1920 x 1080
479 KB
◀
▶
◀
Slideshow �
1
2
3
BGM �
�
2/13
ꕲ
�
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
▶
� Option
� Hide
ꕯ Exit
Select the target folder or drive.
ENTER
ENTER
Select the desired photos.
The selected photo is displayed in full
size.
111
MY Media
4
01_a.jpg
2008/12/10
1920 x 1080
479 KB
ENTER
Select the Slideshow,
◀
▶
My Media
Slideshow �
BGM �
�
◀
2/13
ꕲ
�
BGM, � (Rotate), ꕲ / ꕳ, �
(Energy Saving), Option, or Hide.
▶
� Option
� Hide
ꕯ Exit
►Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos
in the current folder are displayed during slide show.
ꔛ Set
the time interval of the slide show in Option-Set Photo View. menu (Refer to p. 113).
ꔛ You
can adjust Option by using the Q.MENU button on the remote control.
►BGM (Background Music): Listen to music while viewing photos in full size.
the BGM device and album in Option-Set Photo View. menu (Refer to p. 113).
ꔛ You can adjust Option by using the Q.MENU button on the remote control.
ꔛ Set
►� (Rotate): Rotate photos.
ꔛ Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise.
ꔛ Photos
cannot be rotated if its width is greater than the available supported resolution height.
►ꕲ / ꕳ : View the photo in full mode or original mode.
►� (Energy Saving): Increase the brightness of your screen by using ENERGY SAVING button.
►Option: Set values for Slide Speed and BGM (Refer to p.113).
ꔛ You cannot change BGM while BGM is playing.
ꔛ You can only select the MP3 folder saved on the device that currently displays the photo.
► Hide: Hide the menu on the full-sized screen.
see the menu again on the full-sized screen, press ENTER button to display.
ꔛ To
► Exit: Move to the previous menu screen.
112
Using the Photo List Function
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Choose options.
Set Photo View.
◀
▶
Set Video.
Set Audio.
Set 3D video
Slideshow �
1
2
BGM �
�
2/13
ꕲ
�
� Previous
▶
� Option
ENTER
Show the Option menu.
ENTER
Select the desired menu option.
� Hide
!
?
Set Photo View Menu Options
ꕯ Exit
Close
For LED LCD TV,
50/60PX950
My Media
◀
! NOTE (For LED LCD TV)
►You cannot select the Option in 3D
imaging mode.
? If you want to listen to BGM (background
►
music) while viewing *mpo image files,
play a *jpg file and set the BGM folder in
"Option - Set Photo View." Then, you
can select and listen to BGM when viewing *mpo files.
Set Photo View.
◀
Slide Speed
BGM
2
▶
Drive1
•Repeat
◀
On
▶
•Random
◀
Off
▶
� Previous
1
Fast
Close
ENTER
Select Slide Speed or BGM.
ENTER
Make appropriate adjustments.
113
MY Media
* Image shown may differ from your TV.
Set Video Menu Options
For LED LCD TV
For Plasma TV
Set Video.
Set Video.
◀
Picture Mode
Standard
▶
Picture Mode
◀
▶
Standard
•Backlight
70
◀
▶
•Contrast
100
◀
▶
•Contrast
100
◀
▶
•Brightness
50
◀
▶
•Brightness
50
◀
▶
•Sharpness
50
◀
▶
•Color
60
◀
▶
•Color
60
◀
▶
My Media
•Edge Enhancer
◀
High
▶
•Tint
0
◀ R
G
▶
•Noise Reduction
◀
Medium
▶
•Color Temp.
0
◀ W
C
▶
◀
•Noise Reduction
Picture Reset
Low
▶
▼
� Previous
1
Close
� Previous
Close
Make appropriate adjustments. Then, select Close.
ENTER
Set 3D video Menu Options
(For LED LCD TV, 50/60PX950
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
0 ◀ L
Balance
R
i.e)
Put on 3D glasses.
Sit 2 meters from TV to enjoy the best 3D
view.
(To select more comfortable view for
you, change to left/right image of glasses
with ꔅ button.)
▶
ꔉ Enter
� Previous
Close
ꔅ Setting Left/Right
3D
1
114
ENTER
Make appropriate adjustments.
Then, select Close.
3D
End 3D Video
For more information, see the 3D
Imaging section in the Owner's
Manual.
Music list
This TV cannot play back copy-protected files.
The On-Screen Display on your model may be slightly different.
Supported Music File: *.MP3
Bit rate range: 32 Kbps - 320 Kbps
• Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz
Screen Components
2
3
ENTER
ENTER
My Media
1
Select Home Menu.
ENTER
Select MY MEDIA.
ENTER
Select Music List.
2
Page 1/1
Music List
Drive1
USB 1 XTICK
Preview: If any album jacket for
the file (Album Art Image)
exists, this picture is displayed.
2 Moves to upper level folder
3 Current page/Total pages
4 Current page/total pages of
contents
5 Contents under the folder
focused on 2
6 Change to a different input.
7 Move to Movie List or Photo
List.
8 Changes the number or
thumbnails displayed at a time.
9 Allows you to mark certain files.
10 Return to TV viewing.
1
1
3
001. - B01 .mp3
00:00
002. -B02.mp3
00:00
Page 1/1
003. B03.mp3
00:00
4
004. - B04.mp3
00:00
5
005. - B05.mp3
00:00
� Play
ꔅ Change Device
ꔅ To Movie List
ꔅ Change Numbers
6
7
8
ꔅ Mark Mode
9
� Page Change
ꕯ Exit
10
Abnormal files are
displayed using this
graphic.
Non-supported files
are displayed using
this graphic.
115
MY Media
Music Selection
Page 1/1
Music List
Drive1
USB 1 XTICK
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
ENTER
Select the target folder
or drive.
2
ENTER
Select the desired
music file.
3
� Play
ꔅ Change Device
1
Page 1/1
ꔅ To Movie List
ꔅ Change Numbers
ꔅ Mark Mode
ENTER
Music files are played.
� Page Change
ꕯ Exit
My Media
Mark Mode
Page 1/1
Music List
Mark Mode
Drive1
USB 1 XTICK
001. - B01.mp3
00:00
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
� Play
116
ꔅ Mark All
ꔅ Unmark All
ENTER
Select the target folder
or drive.
2
ENTER
Select Mark Mode.
3
ENTER
Select the desired
music file.
4
ENTER
Page 1/1
005. - B05.mp3
00:00
ꔅ Play Marked
1
ꔅ Exit Mark Mode
� Page Change
ꕯ Exit
Play
Marked
Play the selected songs. Once a song
finishes playing, the next selected one
will be played automatically.
Mark All
Mark all songs in the folder.
Unmark
All
Deselect all marked song.
Exit Mark
Mode
Enter or exit the Mark Mode.
Select Play Marked.
Play the marked music
file.
Using the Music List Function
Page 1/1
Music List
� Stop playback.
� Return to normal playback.
� Paused playback.
� � Select the previous or next
song.
2 Play with Photo: Start playing the
selected songs and then move to
the Photo List.
3 Increase or decrease the brightness of your screen
4 Hide the menu on screen.
5 Move to the previous menu
screen.
1
3 file(s) Marked
Drive1
Page 1/1
�
�
001. - B01.mp3
00:00
�
�
003. - B03.mp3
00:00
�
�
� Play with Photo
2
005. - B05.mp3
00:00
02:30 / 03:25
�
� Option
3
� Hide
ꕯ Exit
4
5
My Media
1
�
004. - B04.mp3
00:00
��
�
002. - B02.mp3
�
�
002. - B02.mp3
00:00
Choose options.
Set Audio Play.
Set Audio.
� Previous
1
2
ENTER
ENTER
Close
Show the Option menu.
Select Set Audio Play. or Set Audio..
!
?
! NOTE
►You can listen to the music only within
the device currently played.
?
117
MY Media
Set Audio Play Menu Options
Set Audio Play.
Repeat
◀
On
▶
Random
◀
Off
▶
� Previous
My Media
1
ENTER
Close
Make appropriate adjustments.
Then, select Close.
Set Audio Menu Options
Set Audio.
Sound Mode
◀
Standard
▶
Auto Volume
◀
Off
▶
Clear Voice II
◀
Off
▶
0 ◀ L
Balance
� Previous
1
118
ENTER
R
▶
Close
Make appropriate adjustments.
Then, select Close.
ꔛ
If you don't press any buttons for a while, the play information box
will float across the screen. This prevents screen pixel damage due
to a fixed image remaining on the screen for a extended period of
time.
002. B02.mp3
� 00:31 / 04:04
! NOTE
?
►A damaged or corrupted music does not play but displays 00:00 in playtime.
►Music files with copy-protection will not play.
? Press ENTER or � button to stop the screen saver.
►
My Media
!
119
MY Media
DivX Registration Code
Using the registration number, movies can be rented or purchased at www.divx.com/vod.
Only DivX files matched with the registration code of the purchased TV are playable.
DivX Reg.Code
MY MEDIA
Deactivation
Movie List
My Media
1
2
3
4
!
?
120
Music List
� Previous
You must register your device to
play DivX protected videos.
Registration code : xxxxxxxxxx
Register at http://vod.divx.com
Close
Select MY MEDIA.
MENU
ENTER
Photo List
i
BLUE
Select DivX Option.
Select DivX Reg. Code.
ENTER
Display DivX Reg. Code.
! NOTE
►When loading, some buttons may not work.
►If you use the DivX registration code of another device, the rented or purchased DivX file cannot
? be played. Therefore always use the DivX registration code assigned to this product.
►The video or audio of a file converted based on a standard other than the DivX codec standard
may be corrupted or unable to be played.
► The DRM/*.tp/*.trp file in DLNA server is not played when Movie List is in operation.
Deactivation
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web server and are blocked from activating more devices. DivX VOD
allows the consumer to activate up to 6 devices under one account.
Delete the existing authentication information to receive a new DivX user authentication for TV. Once
this function is executed, a DivX user authentication is required again to see DivX DRM files.
DivX Reg.Code
MY MEDIA
Deactivation
1
2
3
4
5
Music List
� Previous
Yes
No
Select MY MEDIA.
MENU
ENTER
Photo List
Deregistration code:
********
Deregister at http://vod.divx.com
Continue with registration?
My Media
Movie List
i
BLUE
Select DivX Option.
Select Deactivation.
ENTER
ENTER
Select Yes.
Display Deactivation.
121
Network
Network
Legal Notice
Legal Notice
NETWORK
ꔂ Move
• Network Setting
: Wired
• Network Status
: Internet is connected
• Legal Notice
page 1/3
ꔉ Enter
ꔉ
ꔀ
• ESN
IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services
accessible through this device belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such content and services are provided
solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without
limiting the foregoing, unless expressly authorized by the applicable content owner or service
provider, you may not copy, upload, post, transmit, translate, sell, modify, create
derivative works, or distribute in any manner or medium any content or services displayed
through this device.YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND
ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER
EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE
ꔍ
Close
network
1
2
MENU
Select NETWORK.
ENTER
Select Legal Notice.
3
ENTER
4
EXIT
Check Legal notice.
Return to TV viewing.
IMPORTANT NOTICE RELATING TO NETWORK SERVICE
All content and services accessible through this device belong
to third parties and are protected by copyright, patent, trademark
and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use.
You may not use any content or services in a manner that has
not been authorized by the content owner or service provider.
Without limiting the foregoing, unless expressly authorized by
the applicable content owner or service provider, you may not
copy, upload, post, transmit, translate, sell, modify, create derivative works, or distribute in any manner or medium any content
or services displayed through this device.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE
DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES
ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO ANY CONTENT AND SERVICES, EITHER
EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY RIGHTS. LG DOES
NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS,
LEGALITY, OR COMPLETENESS OF ANY CONTENT OR
SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND
DOES NOT WARRANT THAT THE DEVICE OR SERVICES WILL
MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE
122
DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERRORFREE. UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL LG BE LIABLE, WHETHER IN CONTRACT
OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES
ARISING OUT OF, ANY INFORMATION CONTAINED IN, OR
ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY
THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be changed, suspended, removed,
terminated or interrupted, or access may be disabled at any
time, without notice, and LG makes no representation or warranty that any content or service will remain available for any
period of time. Content and services are transmitted by third
parties by means of networks and transmission facilities over
which LG has no control. LG may impose limits on the use of or
access to certain services or content, in any case and without
notice or liability. LG expressly disclaims any responsibility or
liability for any change, interruption, disabling, removal of or
suspension of any content or service made available through
this device.
LG is neither responsible nor liable for customer service related
to the content and services. Any question or request for service
relating to the content or services should be made directly to the
respective content and service providers.
Netcast
Netcast Menu
These services are provided by separate Content Provider.
NetCast menu source can differ by country.
What is a NETCAST?
Stream movies, TV shows and video, or get up to the minute news, stock information or weather updates
directly to your TV.
Home Menu
Quick Menu
Channel List
Netcast
Screen Remote
1
ENTER
ENTER
To view the owner’s manual that provided by
the Content Provider, visit our website at
http://www.lg.com.
ꔛ You can also select the NETCAST using the
NETCAST button on the TV remote control.
ꔛ
Select NetCast.
Select NETCAST menu option.
Enjoy Online Service.
Yahoo! (For USA)
Yahoo! TV Widgets give you the best of the
Internet in perfect harmony with the simplicity
and reliability of your TV. TV Widgets deliver a
Cinematic internetTM experience by converting
your favorite web services for viewing on the TV.
ꔛ Netflix (For USA)
You can instantly watch movies (quite a few new
releases) & TV episodes from Netflix streamed
over the internet to your TV.
To become a Netflix member visit: www.netflix.
com/LG
Note that this service is provided by the Content
Provider, Netflix. It is dependent on Netflix to provide the data.
ꔛ Vudu (For USA)
In order to make rental/purchase transactions on
the Vudu service, a user must create an account
on vudu.com.
That account is linked to a specific device, via a
process called “activation”. It is possible to have
multiple devices associated with a single Vudu
account.
Note that this service is provided by the Content
Provider, Vudu. It is dependent on Vudu to provide the data.
ꔛ YouTube
YouTube is a video sharing website where users
can upload, view, and share video clips.
Netcast
2
ENTER
Picasa
Picasa is an application from Google that appreciates digital image files.
ꔛ
ꔛ
!
?
! NOTE
►The videos list searched from the TV may
different with the list searched from a web
browser on PC.
? The settings of this TV do not affect the
►
YouTube’s playback quality.
►The playback of videos may be paused,
stopped or buffering occurring often
depending on your broadband speed.
► For service that requires log in, join the
applicable service on the website using the
PC and log in through the TV to enjoy
various additional functionalities.
► When you set the city you want with Setup
by pressing the red button, the background
of NetCast will be set to the weather of the
selected city.
►For Plasma TV: If there is no user action 2
minutes following freezing image or video
on screen, the screensaver will activate
itself preventing fixed image remaining on
screen.
123
Netcast
YOUTUBE
YouTube is a video sharing website where users can upload, view, and share video clips.
Screen Components
1
2
YouTube menu
Videos list
1
2
RED
Set the option menu.
Netcast
Return to Netcast menu.
EXIT
Return to TV viewing.
NOTE
►When you press the Q.menu button while the Youtube video is playing in full mode, you can set
the video options.
124
YouTube menu
Home: You can watch the popular video in real time.
Featured: The featured videos list will be displayed.
Popular: The best rated videos list from YouTube server will be displayed.
Most Viewed: The most viewed videos list will be displayed.
Search: The keypad/keyboard menu will be displayed.
History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
Favorites: In sign-in status, this menu will be displayed the videos list that is arranged in the YouTube
server with your account (Some videos may not appear on the Favorites list, even if the videos are
arranged in the server).
Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
Stops the video and displays related videos list.
Netcast
Using the remote control
Pause the video while it is playing.
Play the selected video.
Skip the playback forward or backward.
RED
Set the option menu.
Return to Netcast menu.
EXIT
Return to TV viewing.
125
Netcast
PICASA
Picasa is a photo organizing or sharing website where users can upload, view, and share photos.
Screen Components
1
Picasa menu
2 Photo list
1
2
Netcast
Navigate the desired photos.
ENTER
The selected photo file is displayed.
Return to Netcast menu.
EXIT
126
Return to TV viewing.
Picasa menu
Home: The featured photos list will be displayed.
Friends: You can register users with the pictures you want as friends. You can add up to 10 friends.
Search: The keypad/keyboard menu will be displayed.
My Photos: You can view the pictures uploaded to the Web. This function can only be used when you sign
in.
Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
Netcast
127
picture
PICTURE CONTROL
CONTROL
Picture Size (Aspect Ratio) Control
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux).
PICTURE
• Aspect Ratio
� Move
� Enter
: 16:9
ꔉ
ꔡ
• Picture Wizard
• ꕊ Energy Saving : Off
PICTURE
ꔂ Move
• Aspect Ratio
ꔉ Enter
: 16:9
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
: Standard
• Picture Mode
: Standard
• Backlight
70
• Backlight
70
100
• Contrast
100
• Contrast
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
ꔑ 16:9
□ Just Scan
ꔉ
ꔡ
□ Set By Program
□ 4:3
□ Zoom
□ Cinema Zoom 1
1
2
picture control
3
MENU
Select PICTURE.
ENTER
Select Aspect Ratio.
ENTER
Select the desired picture format.
4
BACK
EXIT
You can also adjust Aspect Ratio in
the Q.Menu.
ꔛ Press the RATIO button repeatedly to
select the desired picture format.
ꔛ
Return to the previous menu.
Return to TV viewing.
When adjusting Zoom or Cinema Zoom in Q.MENU
1
2
3
4
128
Q.MENU
Select Aspect Ratio.
ENTER
Select Zoom or Cinema
Zoom.
ENTER
Adjust proportion of Zoom or
Cinema Zoom. The Cinema
Zoom adjustment range is
1-16.
ENTER
Move the image on the screen.
16:9
4:3
Adjust the picture horizontally, in a linear
proportion to fill the entire screen.
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Just Scan
Zoom
Cinema Zoom
Normally the edges of video signals are
cropped 1-2%. Just Scan turns off this
cropping and shows the complete video.
Notes: If there is noise on the edges of the
original signal, it will be visible when Just Scan
is activated.
Just Scan operates only in DTV/Cable DTV/
C o m p o n e n t / H D M I - DT V/ D V I - DT V
(720p/1080i/1080p) input source.
Set By Program
Selects the proper picture proportion to
match the source’s image.
(4:3
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
This enlarges an image with cinemascope
aspect ratio (2.35:1) without distortion.
Note: When enlarging or reducing the picture, the image may become distorted.
picture control
Just Scan
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will
be cropped.
4:3)
Set By Program
(16:9
16:9)
Set By Program
129
PICTURE CONTROL
Picture Wizard
This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen
quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to Low, Recommended or High, you can see the example of
the changes you made.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
Black Level
Set the screen above identical to the Recommended sample
below.
: 16:9
ꔉ
ꔀ
• Picture Wizard
• ꕊ Energy Saving : Off
1
2
• Picture Mode
: Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
Low
Recommended
• Brightness
High
50 ◀
▶
ꕉ Previous
Select PICTURE.
MENU
ENTER
ENTER
5
ꔉ Next
ENTER
Adjust Black Level.
Select Picture
Wizard.
White Level
Picture Wizard
With Picture Wizard, you can adjust the picture quality of the
original image.
Set the screen above identical to the Recommended sample
below.
picture control
ꕖ
Low
Recommended
• Contrast
ꕉ Previous
3
ENTER
ꔉ Next
Adjust Picture Wizard.
Picture Wizard
High
90 ◀
▶
ꕉ Previous
6
ꔉ Next
ENTER
Adjust White Level.
Tint
Set the screen above identical to the Recommended sample
below.
Standard
• Standard/Preferred
Preferred
Low
◀ Standard ▶
Recommended
• Tint
ꕉ Previous
4
ꔛ
130
0
◀
High
R
G
▶
ꔉ Next
ꕉ Previous
ENTER
Adjust Standard/
Preferred.
If you select Preferred, OSD (On Screen
Display) differ from that shown in this manual.
7
ꔉ Next
ENTER
Adjust Tint.
For LED LCD TV
Backlight
Color
Set the screen above identical to the Recommended sample
below.
Low
Recommended
• Color
50 ◀
ꕉ Previous
Set the Backlight to your Brightness preference.
Dark
High
• Backlight
▶
ꔉ Next
Recommended
30 ◀
ENTER
▶
ꕉ Previous
ꔉ Next
11
8
Bright
Adjust Color.
ENTER
Adjust Backlight.
i.e)
Complete
Horizontal Sharpness
Set the screen above identical to the Recommended sample
below.
� Move
ꘁ Mark
Select (an) input(s) to apply the settings.
ꔑ DTV
□ TV
□ AV1
□ AV2
Low
Recommended
• H Sharpness
50 ◀
ꕉ Previous
□ Component1
High
□ Component2
▶
□ RGB-PC
ꔑ HDMI1
ꔉ Next
ꔑ HDMI2
9
ENTER
Adjust Horizontal
Sharpness.
ꔑ HDMI4
Warning: The picture quality may vary according to the different types of
signal and inputs.
ꕉ Previous
Vertical Sharpness
Set the screen above identical to the Recommended sample
below.
Low
Recommended
• V Sharpness
ꕉ Previous
50 ◀
High
ENTER
MARK
FAV
CHAR/NUM
13
Adjust Vertical
Sharpness.
Select input source to
apply the settings.
i
ENTER
▶
ꔉ Next
10
12
ꔉ Confirm
Save.
picture control
ꔑ HDMI3
The current adjustment value is
saved to Expert1.
Close
14
ENTER
Finish the Picture Wizard.
If you stop the Picture Wizard before the
final step, the changes will not be saved to
the TV.
ꔛ Once the Picture Wizard sets the picture
quality, Energy Saving is changed to Off
automatically.
ꔛ To reset changes made by Picture Wizard,
operate Picture Reset when Picture Mode
is on Expert1.
ꔛ
131
PICTURE CONTROL
ꕊ Energy Saving
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the
Picture Mode.
Press button to run the selected
function.
Home Menu
Screen Remote
Quick Menu
ENERGY
Energy
Saving
SAVING
AV MODE
INPUT
FAV
Q.MENU
SIMPLINK
Channel List
Netcast
Screen Remote
picture control
132
1
2
3
ENTER
ENTER
Select Screen Remote.
ENTER
Select Energy Saving.
ENTER
Select Energy Saving repeatedly
to select your desired menu option.
Close
Enter
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
When selecting Screen off, the
screen will turn off after 3 seconds.
Pressing any button of the remote
controller will turn on the screen
again.
ꔛ If you adjust “Energy Saving-Auto,
Maximum”, Backlight option will not
work (For LED LCD TV).
ꔛ When selecting “Energy Saving Off, Minimum, or Medium, you can
adjust Backlight feature (For LED
LCD TV).
ꔛ If
you adjust “Energy SavingIntelligent Sensor”, Sharpness, Color,
Color Temperature feature will not
work (For Plasma TV).
ꔛ When selecting Auto, Backlight is
automatically adjusted through
Intelligent Sensor according to the
surrounding conditions. (For LED
LCD TV)
ꔛ When selecting Off, Energy Saving is
not used.
ꔛ Press the ENERGY SAVING button
repeatedly to select the appropriate
Energy Saving.
ꔛ You can also adjust Energy Saving in
the PICTURE menu.
ꔛ Intelligent Sensor: The most suitable
picture is automatically adjusted
according to the surrounding conditions (For Plasma TV).
ꔛ
Preset Picture Settings (Picture Mode)
There are factory presets for picture settings available in the user menus. You can use a preset,
change each setting manually, or use the Intelligent Sensor.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
• Picture Wizard
□ Intelligent Sensor
• ꕊ Energy Saving : Off
□ Vivid
• Picture Mode
: Standard
ꔑ Standard
• Backlight
70
• Contrast
100
• Brightness
50
• Sharpness
70
□ Vivid
ꔑ Standard
ꔉ
ꔉꔀ
ꔀ
□ ꔧ Cinema
□ ꔧ Cinema
□ ꔧ Bright Room
□ ꔧ Bright Room
□ Sport
□ Sport
□ Game
□ Game
□ ꕋExpert1
□ ꕋExpert1
□ ꕋExpert2
□ ꕋExpert2
Other models
1
2
3
MENU
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select your desired menu option.
BACK
EXIT
Plasma TV
Return to the previous menu.
Return to TV viewing.
ꔧ Bright Room: This is the specification to
optimize TV viewing in Bright Room.
When selecting ꔧ Bright Room, Aspect ratio
changes to Just scan.
ꔛ Sport: This is the video mode to emphasize
dynamic video and primary color (e.g, white,
uniform, grass, sky blue etc.) by realizing the
optimal screen for sports.
ꔛ Game: This is the mode to realize fast response
speed in a fast gaming screen.
ꔛ Expert: This is the mode to adjust the video in
detail for video quality expert and general user.
ꔛ You can also adjust Picture Mode in the
Q.Menu.
ꔛ When selecting Intelligent Sensor, Energy
Saving is changed to Auto automatically (For
LED LCD TV).
ꔛ When selecting Intelligent Sensor, it changes
Backlight, contrast, brightness, sharpness, color,
tint and color temperature automatically (For
LED LCD TV).
ꔛ Intelligent Sensor: The most suitable picture is
automatically adjusted according to the surrounding conditions.
ꔛ
picture control
Vivid, Standard, Cinema, Sport, and Game
Settings are preset for the optimum picture
quality at the factory.
ꔛ Vivid: This is the mode to maximize the effect
of the video in the retail store. Strengthen the
contrast, brightness, color and sharpness for
vivid picture.
ꔛ Standard: This is the mode to realize optimum
viewing condition for the general user.
ꔛ ꕭ (Auto Power Saving): This is the mode to
maximize reducing the power consumption
without hurting the picture quality. This features is available only on Plasma TV.
ꔛ Cinema: This mode optimizes video for watching movies.
ꔛ ꔧ Cinema: This is cinema quality mode to
provide you the experience of watching a movie
at home. The user will be able enjoy the best
level of satisfactory screen quality in any movie
without any separate adjustments. ꔧ Cinema
express the optimal screen quality when it is
darkest.
When selecting ꔧ Cinema, Aspect ratio
changes to Just scan.
ꔛ
4
ꔉ
ꔀ
□ꕭ
133
PICTURE CONTROL
Manual Picture Adjustment - User Mode
Adjust the picture appearance to suit your preference and viewing situations.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
ꔠ
• Picture Wizard
1
2
3
picture control
4
5
: Standard
• Backlight
70
100
• Contrast
• Brightness
50
• Sharpness
70
ꔉ
ꔀ
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select your desired menu option.
ENTER
Select Backlight (For LED LCD TV),
Contrast, Brightness, Sharpness, Color,
Tint, Color Temp., or Advanced Control.
ENTER
Make appropriate adjustments.
BACK
EXIT
134
ꔡ
• Picture Mode
MENU
6
Return to the previous menu.
Return to TV viewing.
70 ◀
• Backlight
• ꕊ Energy Saving : Off
▶
ꔉ Enter
Backlight (For LED LCD TV): This
function adjusts the brightness of the
backlight behind the LCD screen.
Adjusting the backlight is recommended when setting the brightness
of the TV. When decreasing the
backlight, the brightness of the black
becomes darker without any loss in
video signal and the power consumption is reduced.
ꔛ Backlight can only be adjusted in "
Energy Saving - Off, Minimum, or
Medium".
ꔛ Contrast: Increase or decrease the
gradient of the video signal. You may
use Contrast when the bright part of
the picture is saturated.
ꔛ Brightness: Adjusts the base level of
the signal in the picture. You may use
Brightness when the dark part of the
picture is saturated.
ꔛ Sharpness: Adjusts the level of crispness in the edges between the light
and dark areas of the picture. The
lower the level, the softer the image.
ꔛ Color: Adjusts intensity of all colors.
ꔛ Tint: Adjusts the balance between
red and green levels.
ꔛ Color Temp.: Set to warm to enhance
hotter colors such as red, or set to
cool to enhance cooler colors such
as blue.
ꔛ
Picture Improvement Technology
(Advanced Control)
Advanced Control allows you to adjust some of the advanced features of your LG display.
To reset to the factory default after making adjustments to each input source, execute the Picture
Reset function for each Picture Mode.
PICTURE
ꔂ Move
ꔉ Enter
PICTURE
ꔂ Move
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
ꔉ
ꔀ
• Tint
0 R
Dynamic Contrast
• Color Temp. 0 W
Dynamic Color
• Advanced Control
• Picture Reset
Clear
White
• Picture
Reset
• TruMotion
: Low
• TruMotion
: Low
Skin
Color
• Screen (RGB-PC)
• Screen (RGB-PC)
• LED Local Dimming: On
• Color
ꔉ Enter
60
◀
G
Low
C
Gamma
Dynamic Contrast
Dynamic Color
Off
Noise Reduction
0
Noise Reduction
• LED Local Dimming: On
Digital Noise Reduction
▶
Off
Black Level
Off
Film Mode
Off
Low
Off
Color Gamut
Wide
Low
ꔍ
Eye Care
Low
Close
ꔍ
▶
Medium
Black Level
Close
Low
Off
Gamma
Off
Medium
◀
Plasma TV
LED LCD TV
2
3
MENU
Select PICTURE.
ENTER
Select Advanced Control.
ENTER
Select your desired menu option.
4
picture control
1
Make appropriate adjustments.
5
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
135
PICTURE CONTROL
Expert Picture control
� Expert1 and � Expert2 provide even more advanced picture settings for users. Typical used by
professionals for calibrating the TV.
PICTURE
• Aspect Ratio
ꔂ Move
ꔉ Enter
: 16:9
PICTURE
• Picture Wizard
• ꕊ Energy Saving : Off
• Picture Mode
: ꕋ Expert1ꔉ
• Backlight
70
• Contrast
90
• TruMotion
• Brightness
50
• H Sharpness 70
ꔑ ꕋ Expert1
ꔉ
ꔀ
□ ꕋ Expert2
picture control
1
2
3
4
5
MENU
Select PICTURE.
ENTER
Select Picture Mode.
ENTER
Select � Expert1 or � Expert2.
ENTER
Select Expert Control.
ENTER
Select your desired menu option.
6
Make appropriate adjustments.
7
BACK
EXIT
136
Return to the previous menu.
Return to TV viewing.
• V Sharpness 70
Dynamic Contrast
◀
• Color
70
Noise Reduction
• Tint
70
Digital Noise
Reduction
• Expert
Control
• Picture Reset
Black Level
: Low
Real Cinema
• Screen (RGB-PC)
Color Gamut
• LED Local Dimming:
On
□ Sport
□ Game
ꔂ Move
ꔉ Enter
Off
R
W
Off
Off
▶
G
C
Dynamic Contrast
◀
Off
Noise Reduction
Off
Gamma
Low
Black Level
On
Film Mode
Medium
Low
On
Wide
Color Gamut
Edge Enhancer
High
Edge Enhancer
High
xvYcc
Auto
xvYcc
Auto
Expert Pattern
Off
Wide
Expert Pattern
Off
ꔍ
ꔍ
Close
Close
LED LCD TV
Plasma TV
▶
*This feature is not available for all models.
ꔛ
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The picture is improved by making bright parts brighter and
dark parts darker.
ꔛ
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, and green
look more vivid.
Skin Color
ꔛ
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
ꔛ
Reduces screen noise without compromising video quality.
Digital Noise
Reduction
ꔛ
Removes noise caused by compressing video.
Dynamic Contrast
Dynamic Color
Gamma
You can adjust brightness of dark areas and middle gray level areas of the
picture.
Low : Make brighter and middle gray level areas of the picture brighter.
Medium : Express original picture levels.
High: Make dark and middle gray level areas of the picture darker.
Black Level
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
ꔛ Set black level of the screen to proper level.
ꔛ This function is available in the following modes: TV, AV (NTSC-M), HDMI
or Component.
Clear White
ꔛ
ꔛ
Make the white area of screen brighter and more white.
Makes video clips recorded in film look more natural by eliminating judder
effect.
ꔛ DVD and Blu-ray movies are filmed at 24 frames per second (fps). With
LG Real Cinema, every frame is consistently processed 5 times in 1/24 of
a second producing 120 fps with TruMotion or 2 times in 1/24 of a second
producing 48 fps without TruMotion, thus totally eliminating the judder
effect.
ꔛ This function can also work when TruMotion is off.
ꔛ
Real Cinema
or
Film Mode
picture control
Adjust the brightness of the screen to prevent the screen from being too
bright. Dims extremely bright pictures.
ꔛ This feature is enabled in “Picture Mode-Standard, Sports, Game”.
ꔛ
Eye Care
LED LCD TV: Advanced Control
Plasma TV: Advanced Control, Expert Control
Standard/sRGB: Displays standard set of colors.
Wide: Increase number of colors used.
ꔛ Maximize the utilization of colors to increase color quality.
Color Gamut
LED LCD TV: Expert Control
Displays color domain of the signal.
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
EBU: Mode to display EBU standard color area.
SMPTE: Mode to display SMPTE standard color area.
BT709: Mode to display BT709 standard color area.
ꔛ
137
PICTURE CONTROL
Edge Enhancer
ꔛ
Show clearer and distinctive yet natural edges in the video.
This produces richer colors.
This feature represents rich color as much as conventional video signal.
ꔛ This function is enabled in "Picture mode - Cinema / ꔧ Cinema / ꔧ
Bright Room, ꕋ Expert" when a xvYCC signal is inputted through HDMI.
ꔛ
xvYCC
Color Filter
Expert Pattern
ꔛ
ꔛ
This function filters specific colors in the video.
You can use the RGB filter to set color saturation and hue accurately.
ꔛ
This is a pattern used for expert adjustment.
This function is enabled in "Picture mode - ꕋ Expert" when you watch
DTV.
ꔛ
Color Temperature
Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
c-1. Method : 10 Point IRE (LED LCD TV)
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
- Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, then the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
c-2. Method : 20 Point IRE (Plasma TV)
- IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 5, 10, 15 - 100. You can adjust Red, Green
or Blue according to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
Color Management
System
A tool used by the experts to make adjustments by using the test patterns,
this does not affect other colors but can be used to selectively adjust the
6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is
-30 - +30.
- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30
- +30.
- This feature is disabled in RGB-PC and HDMI-PC mode.
ꔛ
picture control
ꔛ
138
Picture Reset
Settings of the selected picture modes return to the default factory settings.
PICTURE
• Color
G
• Tint
0 R
? All picture settings will be reset.
C
• Color
Temp. 0 W
Continue?
• Advanced Control
3
4
60
• Picture Reset
• TruMotion
: Low
Yes
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
i
• Advanced Control
Resetting
video configuration...
• Picture
Reset
• TruMotion
: Low
• LED Local Dimming: On
• LED Local Dimming: On
ENTER
Select Picture Reset.
ENTER
Select Yes.
Initialize the adjusted value.
ꔉ Enter
• Screen (RGB-PC)
Select PICTURE.
EXIT
ꔉ
ꔂ Move
• Screen (RGB-PC)
MENU
ENTER
Noꔀ
PICTURE
picture control
2
ꔉ Enter
1
ꔂ Move
Return to TV viewing.
139
PICTURE CONTROL
TruMotion - For LED LCD TV
Advance video technology that provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture.
PICTURE
ꔂ Move
ꔉ Enter
• Color
60
• Tint
0
R
G
• Color Temp.
0
W
C
• Advanced Control
• Picture Reset
• TruMotion
: Low
TruMotion
◀
• Judder
3
• Blur
3
Low
▶
� Enter
ꔉ
ꔀ
• Screen (RGB-PC)
• LED Local Dimming: On
1
2
picture control
3
MENU
ENTER
Select TruMotion.
ENTER
Select Low, High, User, or Off.
Adjustment for TruMotion (Judder
and Blur) with selecting User
4
ENTER
5
Select Judder or Blur.
Make appropriate adjustments.
6
BACK
EXIT
140
Select PICTURE.
Return to the previous menu.
Return to TV viewing.
Off: Turn off TruMotion operation.
Low: Provides smooth picture movement. Use this setting for standard
use.
ꔛ High:
Provides smoother picture
movement.
ꔛ Judder: Adjusts noise of the screen.
ꔛ Blur: Adjusts after-image of the screen.
ꔛ TruMotion works with all inputs except
PC mode.
ꔛ If you enable "TruMotion", noise may
appear on the screen. If this occurs,
set "TruMotion" to "Off".
ꔛ If you select "Picture Mode-Game"
set "TruMotion" to "Off".
ꔛ
ꔛ
LED Local Dimming - For LED LCD TV
After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve
the contrast ratio. This feature is disabled in “Picture Mode-Game”.
PICTURE
ꔂ Move
ꔉ Enter
PICTURE
ꔂ Move
• Color
60
• Color
60
• Tint
0
R
G
• Tint
0
R
G
• Color Temp.
0
W
C
• Color Temp.
0
W
C
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
• TruMotion
: Low
• TruMotion
: Low
• Screen (RGB-PC)
• LED Local Dimming: On
ꔠ
ꔉ
• Screen (RGB-PC)
• LED Local Dimming: On
□ Off
ꔑ On
1
2
MENU
Select PICTURE.
ENTER
Select LED Local Dimming.
ENTER
Select On or Off.
4
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
ꔠ
ꔉ
picture control
3
ꔉ Enter
141
PICTURE CONTROL
Power Indicator - For LED LCD TV
Adjust the power/standby indicator light on the front of the TV.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
• Caption
ꔉ
ꔀ
• Initial Setting
picture control
2
3
142
:1
• Set ID
:1
: Home Use
• Mode Setting
: Home Use
Select Power Indicator.
ENTER
Select Standby Light or Power Light.
Select your desired options.
EXIT
◀
Power Light
• Mode Setting
ENTER
BACK
Standby Light
: Off
• Power Indicator
• Set ID
Select Option.
5
ꔉ Enter
On
▶
On
• Initial Setting
MENU
4
ꔂ Move
• Language
: Off
• Power Indicator
1
OPTION
Return to the previous menu.
Return to TV viewing.
Close
Standby Light: Determines whether
to set the indicator light on the front
of the TV to On or Off in standby
mode.
ꔛ Power Light: Determines whether to
set the indicator light on the front of
the TV to On or Off when the power
turns on.
ꔛ
Image Sticking Minimization (ISM) Method - For Plasma TV
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You
can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost
image.
OPTION
ꔂ Move
OPTION
ꔉ Enter
• Language
• Caption
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
ꔉ
ꔀ
• ISM Method
: Off
• ISM Method
• Initial Setting
• Initial Setting
• Set ID
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
ꔑ Normal
□ Orbiter
ꔉ
ꔡ
□ Color Wash
□ White Wash
1
2
Select Option.
ENTER
Select ISM Method.
ENTER
Select Normal, Orbiter, Color Wash,
or White Wash.
4
EXIT
Normal: If image sticking is never a
problem, ISM is not necessary - set
to Normal.
ꔛ Orbiter: To avoid a ghost image on
the screen, the image will move every
2 minutes to help prevent ghost
images. However, it is best not to
allow any fixed image to remain on
the screen.
ꔛ Color Wash: The color block with the
screen moved a little and the white
pattern are displayed. It is difficult to
see the after image on all colors.
Once it has been corrected it will not
be visible in any color.
ꔛ White Wash: White Wash removes
ghost images from the screen. Use
sparingly. Watch the TV normally for
a while before using this feature to
see if the ghost image disappears on
its own.
ꔛ
Return to TV viewing.
!
?
picture control
3
MENU
! NOTE
►An excessive ghosted image may be
impossible to clear entirely with White
? Wash. To return to normal viewing, press
the any button.
143
SOUND
SOUND &&LANGUAGE
LANGUAGE
CONTROL
CONTROL
Auto Volume
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each program.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off � 3
• Balance
1
2
SOUND & LANGUAGE CONTROL
144
3
ꔉ
ꔡ
0
• Auto Volume
: On
• Clear Voice II
: Off � 3
• Balance
ꔑ On
0 L
• Sound Mode
: Standard
• Infinite Sound:Off
• Infinite Sound:Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Select Auto Volume.
ENTER
Select On or Off.
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
□ Off
: Standard
ENTER
EXIT
R
ꔂ Move
Select Audio.
BACK
L
AUDIO
• Sound Mode
MENU
4
ꔉ Enter
ꔠ
ꔉ
R
Clear Voice II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
ꔂ Move
• Auto Volume
: Off
• Clear Voice II
: Off � 3
ꔉ
ꔀ
• Balance
1
2
3
• Sound Mode
: Standard
ꔉ Enter
0
L
R
• Infinite Sound:Off
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Select On or Off.
Select Level.
Make appropriate adjustments.
Return to the previous menu.
R
◀
�3
-
Off
▶
+
Close
SOUND & LANGUAGE CONTROL
Adjustment for Clear Voice Level
with selecting On
ꔉ Enter
• Clear Voice II
L
0• Level
50
ENTER
EXIT
: Off � 3
• Balance
• Treble
Select Clear Voice II.
BACK
: Off
• Clear Voice II
• Infinite Sound:Off
ENTER
6
• Auto Volume
: Standard
Select Audio.
5
ꔂ Move
• Sound Mode
MENU
4
AUDIO
Return to TV viewing.
145
SOUND & LANGUAGE CONTROL
Balance
Adjust the left/right sound of speaker to suit your taste and room situations.
AUDIO
ꔂ Move
2
SOUND & LANGUAGE CONTROL
146
3
: Off
• Auto Volume
: Off
: Off � 3
• Clear Voice II
: Off � 3
0
L
ꔀ
R ꔉ
: Standard
• Sound Mode
: Standard
• Infinite Sound:Off
• Infinite Sound:Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Select Balance.
ENTER
Make appropriate adjustments.
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
• Balance
0 ◀
L
R
0ꔉ
ENTER
EXIT
• Balance
• Sound Mode
Select Audio.
BACK
ꔂ Move
• Clear Voice II
MENU
4
AUDIO
• Auto Volume
• Balance
1
ꔉ Enter
Close
L
R
▶
Preset Sound Settings (Sound mode)
Sound Mode lets you enjoy the best sound without any special adjustment using factory presets.
AUDIO
ꔂ Move
2
: Off
• Auto Volume
: Off
• Clear Voice II
: Off � 3
• Clear Voice II
: Off � 3
0
L
R
ꔉ
ꔀ
• Balance
• Sound Mode
: Standard
• Infinite Sound:Off
• Treble
50
• Bass
50
• Reset
MENU
Select Audio.
ꔛ
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
4
BACK
EXIT
ꔂ Move
Return to the previous menu.
Return to TV viewing.
• Sound Mode
: Standard
ꔉ Enter
0 L
ꔑ Standard
□ Music
• Infinite Sound:Off
□ Cinema
• Treble
50
□ Sport
• Bass
50
□ Game
• Reset
R
ꔉ
ꔡ
Standard, Music, Cinema, Sport, and
Game are preset for optimum sound
quality at the factory.
ꔛ You can also adjust Sound Mode in
the Q.Menu.
ꔛ Standard:
Offers standard-quality
sound.
ꔛ Music: Optimizes sound for listening
to music.
ꔛ Cinema: Optimizes sound for watching movies.
ꔛ Sport: Optimizes sound for watching
sports events.
ꔛ Game: Optimizes sound for playing
games.
SOUND & LANGUAGE CONTROL
3
AUDIO
• Auto Volume
• Balance
1
ꔉ Enter
147
SOUND & LANGUAGE CONTROL
Sound Setting Adjustment - User Mode
Adjust the sound to suit your taste and room situations.
AUDIO
ꔂ Move
ꔉ Enter
AUDIO
ꔂ Move
• Auto Volume
: Off
• Auto Volume
: Off
• Clear Voice II
: Off � 3
• Clear Voice II
: Off � 3
• Balance
0
L
R
• Balance
• Sound Mode
: Standard
• Sound Mode
• Infinite Sound:Off
• Treble
50
• Bass
50
• Reset
ꔉ
ꔀ
0
ꔉ Enter
L
R
: Standard
• Infinite Sound
• Infinite Sound:Off
• Treble
• Bass
• Reset
50 • Treble
50 • Bass
Off
50
◀
▶
50
Close
1
2
3
4
SOUND & LANGUAGE CONTROL
148
5
MENU
Select Audio.
ENTER
Select Sound Mode.
ENTER
Select Standard, Music, Cinema,
Sport, or Game.
ENTER
Select Infinite Sound, Treble, or Bass.
ENTER
Make appropriate adjustments.
6
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
If sound quality or volume is not at
the level you want, it is recommended
to use a separate home theater system or amp to cope with different
user environments.
ꔛ If you select “Clear Voice II-On”, the
Infinite Sound feature will not operate.
ꔛ Infinite Sound: Infinite Sound is a
patented LG proprietary sound processing technology that strives
immersive 5.1 surround sound with
just two front speakers.
ꔛ
Audio Reset
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
ꔂ Move
• Clear Voice II
• Balance
• Sound Mode
• TV Speaker
3
4
Yes
: On
MENU
Select Audio.
ENTER
Select Reset.
ENTER
Select Yes.
ENTER
EXIT
L
R
No
Initialize the adjusted value.
Return to TV viewing.
ꔉ
ꔀ
ꔂ Move
ꔉ Enter
: Off � 3
• Balance
0
L
R
• Sound Mode
: Standard
• Infinite Sound:Off
i Resetting audio configuration...
• Treble
50
• Bass
• Reset
• TV Speaker
: On
50
SOUND & LANGUAGE CONTROL
2
0
: Standard
• Reset
AUDIO
• Clear Voice II
• Infinite Sound:Off
? All audio settings will be resetted.
• Treble
50
Continue?
• Bass
50
1
ꔉ Enter
: Off � 3
149
SOUND & LANGUAGE CONTROL
TV Speakers On/Off Setup
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
• Clear Voice II
ꔂ Move
• Balance
1
2
SOUND & LANGUAGE CONTROL
150
3
• Sound Mode
: Standard
0
R
• Balance
0
: Standard
• Infinite Sound:Off
• Infinite Sound:Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
• TV Speaker
: On
• TV Speaker
: On
ENTER
Select TV Speaker.
ENTER
Select On or Off.
EXIT
L
ꔂ Move
Return to the previous menu.
Return to TV viewing.
ꔠ
ꔉ
ꔉ Enter
: Off � 3
• Sound Mode
Select Audio.
BACK
AUDIO
• Clear Voice II
MENU
4
ꔉ Enter
: Off � 3
L
□ Off
ꔑ On
R
ꔠ
ꔉ
Stereo/SAP Broadcast Setup
On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio
Program) that accompanies the stereo program if the station transmits an additional sound signal.
Mono sound is automatically used if the broadcast is only in Mono.
Multi Audio
English �
A
ꕉ Exit
1
2
Digital TV
Q.MENU
Select SAP.
ENTER
Select Mono, Stereo, or
SAP.
3
EXIT
Return to TV viewing.
1
2
Q.MENU
Select Multi Audio.
ENTER
Select other languages.
3
EXIT
Return to TV viewing.
SOUND & LANGUAGE CONTROL
Analog TV
151
SOUND & LANGUAGE CONTROL
Audio Language
This feature operates only in DTV/Cable DTV mode.
OPTION
ꔂ Move
• Language
• Caption
ꔉ
: Off
• Power Indicator
SOUND & LANGUAGE CONTROL
152
2
3
: Off
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select Language.
ENTER
Select Audio Language.
Select your desired language.
EXIT
• Caption
• Initial Setting
ENTER
BACK
• Language
:1
Select Option.
5
ꔂ Move
• Set ID
MENU
4
ꔡ
OPTION
• Power Indicator
• Initial Setting
1
ꔉ Enter
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
Menu Language
English
Audio Language
◀ English ▶
Close
On-screen Menus Language Selection
The menus can be shown on the screen in the selected language.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
1
2
ꔡ
• Initial Setting
• Initial Setting
:1
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select Language.
ENTER
Select Menu Language.
Select your desired language.
From this point on, the on-screen menus
will be shown in the selected language.
EXIT
: Off
• Set ID
ENTER
BACK
• Caption
• Power Indicator
Select Option.
5
• Language
• Power Indicator
MENU
4
ꔂ Move
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
Menu Language
◀ English ▶
Audio Language
English
Close
SOUND & LANGUAGE CONTROL
3
ꔉ
: Off
OPTION
153
SOUND & LANGUAGE CONTROL
Caption Mode
Analog Broadcasting System Captions
Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying
captioning information if provided on a program. Analog caption displays information at any position
on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would
be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to
memorize the caption/text mode which was last set when you turned the power off. This function is
only available when Caption Mode is set On.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
SOUND & LANGUAGE CONTROL
154
3
• Set ID
:1
• Mode Setting
: Home Use
• Mode Setting
: Home Use
Select Caption.
ENTER
Select On.
Select CC1-4 or Text1-4.
EXIT
Return to the previous menu.
Return to TV viewing.
◀
ꔉ Enter
On
Mode
• Initial Setting
ENTER
BACK
: CC1
:1
Select Option.
5
• Caption
• Set ID
MENU
4
ꔉ
ꔀ
• Power Indicator
• Initial Setting
2
ꔂ Move
• Language
: Off
• Power Indicator
1
OPTION
▶
CC1
Digital Option
Close
When selecting Off, Sub-menus for
Analog, DTV, and Digital Option
become disabled.
ꔛ Caption
The term for the words that scroll
across the bottom of the TV screen;
usually the audio portion of the program provided for the hearing
impaired.
ꔛ Text
The term for the words that appear in
a large black frame and almost cover
the entire screen; usually messages
provided by the broadcaster.
ꔛ
Digital Broadcasting System Captions
Choose the language you want the DTV/Cable DTV Captions to appear in.
Other Languages can be chosen for digital sources only if they are included on the program.
This function in only available when Caption Mode is set On.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
1
3
ꔉ
ꔀ
• Power Indicator
• Initial Setting
• Initial Setting
:1
• Set ID
:1
: Home Use
• Mode Setting
: Home Use
ENTER
Select On.
Select CC1-4, Text1-4, or Service1 - 6.
Return to the previous menu.
Return to TV viewing.
◀
On
Mode
• Mode Setting
Select Caption.
EXIT
: CC1
• Set ID
ENTER
BACK
• Caption
• Power Indicator
Select Option.
5
ꔉ Enter
• Language
: Off
MENU
4
ꔂ Move
▶
CC1
Digital Option
Close
SOUND & LANGUAGE CONTROL
2
OPTION
155
SOUND & LANGUAGE CONTROL
Caption Option
Customize the DTV/Cable DTV captions that appear on your screen.
This function in only available when Caption Mode is set On.
◀
OPTION
• Language
• Caption
ꔂ Move
ꔉ Enter
Mode
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
Font 1
Text Color
▶
■ White
Text Opacity
CC1
Solid
Bg Color
Digital Option
Close
▶
A Standard
Font
◀
On
: CC1ꔉ
• Power Indicator
Custom
Size
■ Black
Bg Opacity
Solid
Edge Type
None
Edge Color
■ Black
Close
1
MENU
Select Option.
Size: Set the word size.
Font: Select a typeface for the text.
ꔛ Text Color: Choose a color for the
text.
ꔛ Text Opacity: Specify the opacity for
the text color.
ꔛ Bg (Background) Color: Select a
background color.
ꔛ Bg (Background) Opacity: Select the
opacity for the background color.
ꔛ Edge Type: Select an edge type.
ꔛ Edge Color: Select a color for the
edges.
ꔛ
ꔛ
2
SOUND & LANGUAGE CONTROL
3
ENTER
Select Caption.
ENTER
Select On.
4
5
Select Digital Option.
ENTER
Customize the Size, Font, etc., to your
preference. A preview icon is provided
at the bottom of the screen, use it to
see the caption language.
6
7
BACK
EXIT
156
Select Custom.
Return to the previous menu.
Return to TV viewing.
TIME SETTING
Clock Setting
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME
ꔂ Move
ꔉ Enter
• Clock
ꔉ
• Off Time
: Off
• On TIme
• Sleep Timer
ꔡ
TIME
ꔂ Move
ꔉ Enter
• Clockꔉ
◀
Auto
• Off Time
: Off
: Off
• On TIme
: Off
: Off
• Sleep Timer
: Off
Month
▶
02
Date
21
Year
2010
Hour
10 AM
Minute
10
Time Zone
Eastern
Daylight Saving
Auto
Close
1
2
Select Time.
ENTER
Select Clock.
ENTER
Select Auto.
4
Select your viewing area time zone.
USA: Eastern, Central, Mountain,
Pacific, Alaska, or Hawaii.
Canada, Philippines: Eastern,
Central, Mountain, Pacific, New
Foundland, or Atlantic.
5
Select Auto, Off, or On (depending
on whether or not your viewing area
observes Daylight Saving time).
6
BACK
EXIT
TIME SETTING
3
MENU
Return to the previous menu.
Return to TV viewing.
157
TIME SETTING
Manual Clock Setup
If the current time setting is wrong, reset the clock manually.
TIME
ꔂ Move
ꔉ Enter
• Clock
ꔉ
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
ꔡ
TIME
ꔂ Move
ꔉ Enter
• Clockꔉ
◀
Manual
• Off Time
: Off
Month
• On TIme
: Off
Date
• Sleep Timer
: Off
2010
Hour
10 AM
10
Time Zone
Eastern
Daylight Saving
Auto
Close
2
3
TIME SETTING
MENU
Select Time.
ENTER
Select Clock.
ENTER
Select Manual.
4
Select the Year, Month, Date, Hour, or Minute
option.
5
Set the Year, Month, Date, Hour, or Minute
option.
6
BACK
EXIT
158
Return to the previous menu.
Return to TV viewing.
21
Year
Minute
1
▶
02
Auto On/Off Time Setting
This function operates only if the current time has been set.
The Off Time function overrides the On Time function if they are both set to the same time.
The TV must be in standby mode for the On Time to work.
If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV
will automatically revert to standby mode.
TIME
ꔂ Move
ꔉ Enter
• Clock
TIME
ꔂ Move
ꔉ Enter
• Clock
• Off Time
: Off
• On TIme
: Off
• Sleep Timer
: Off
ꔉ
ꔀ
ꔎ Feb. 21, 2010 10:10 AM
• Off Time
: Off
• On TIme
: 6:30 AM (Once)ꔉ
Repeat
: Off
Hour
• Sleep Timer
◀ Once ▶
6 AM
Minute
30
Input
TV
Channel
TV 2-0
Volume
30
Close
1
2
Select Time.
ENTER
Select Off Time or On Time.
1
ENTER
Select Repeat.
2
4
Select Off, Once, Daily, Mon.~Fri.,
Mon.~Sat., Sat.~ Sun., or Sun..
5
Select and set Hour or Minute.
6
BACK
EXIT
3
4
Select Input.
Select the desired input source.
When Selecting TV:
set the channel at turn-on.
TIME SETTING
3
To cancel On/Off Time function, select
Off.
ꔛ Only for On Time function
ꔛ
MENU
Adjust to sound level at
turn-on.
Return to the previous menu.
Return to TV viewing.
159
TIME SETTING
Sleep Timer Setting
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.
TIME
ꔂ Move
ꔉ Enter
• Clock
TIME
ꔂ Move
ꔉ Enter
• Clock
• Off Time
: Off
• Off Time
: Off
• On TIme
: Off
• On TIme
: Off
• Sleep Timer
: Off
ꔠ
ꔉ
• Sleep Timer
ꔑ Off
□ 10 min.
: Offꔉ
□ 20 min.
ꔉ
ꔡ
□ 30 min.
□ 60 min.
□ 90 min.
□ 120 min.
□ 180 min.
□ 240 min.
1
2
3
MENU
ENTER
Select Sleep Timer.
ENTER
Make appropriate adjustments.
4
BACK
TIME SETTING
160
Select Time.
EXIT
Return to the previous menu.
Return to TV viewing.
ꔛ
ꔛ
To cancel the Sleep Timer, select Off.
You can also adjust Sleep Timer in
the Q.Menu.
PARENTAL CONTROL / RATINGS
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by
the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be
blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the
theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including made-for-TV movies:
TV-G (General audience)
TV-PG(Parental guidance suggested)
ꔛ TV-14 (Parents strongly cautioned)
ꔛ TV-MA (Mature audience only)
ꔛ TV-Y (All children)
ꔛ TV-Y7 (Children 7 years older)
ꔛ
ꔛ
Set Password & Lock System
Setting up Your Password
Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.
For Canada, Philippines
For USA
ꔂ Move
• Set Password
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
ꔉ Enter
ꔉ
• Lock System
: On
ꔡ
LOCK
ꔂ Move
• Set Password
ꔉ
ꔡ
• Lock System
: On
• Block Channel
• Block Channel
• Movie Rating
• TV Rating-English
• TV Rating-Children
• TV Rating-French
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
• Key Lock
: Off
ENTER
Select Lock.
Input the password.
ꔉ Enter
Enter Password
*
*
*
*
Close
Enter the password as requested.
The TV is set up with the initial
password “0-0-0-0”.
ꔛ If you forget your password, press
“0-3-2-5” on the remote control.
ꔛ
ꔛ
PARENTAL CONTROL / RATING
LOCK
161
PARENTAL CONTROL / RATINGS
Set Password
Change the password by inputting a new password twice.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
1
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
: On
ꔡ
4
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
PARENTAL CONTROL / RATING
162
5
BACK
EXIT
*
*
*
*
*
*
*
• Block Channel
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
Input the password.
1
*
Confirm
• Movie Rating
Select Lock.
Choose any 4 digits for your new
password.
As soon as the 4 digits are entered,
re-enter the same 4 digits on the
Confirm.
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
New
• Block Channel
Select Set Password.
ENTER
• Set Password
: On
0
3
ꔂ Move
• Lock System
ENTER
MENU
ꔉ
• Lock System
LOCK
Close
Lock System
Enables or disables the blocking scheme you set up previously.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
LOCK
ꔂ Move
• Set Password
ꔉ Enter
• Lock System
: On
• Block Channel
□ Off
: Onꔉ
ꔑ On
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
ENTER
Select Lock.
ꔉ
ꔀ
• Lock System
ꔛ
ꔠ
ꔉ
When you select On, the Lock
System is enable.
Input the password.
0
3
4
Select Lock System.
ENTER
5
BACK
Return to the previous menu.
Return to TV viewing.
PARENTAL CONTROL / RATING
EXIT
Select On or Off.
163
PARENTAL CONTROL / RATINGS
Channel Blocking
Blocks any channels that you do not want to watch or that you do not want your children to watch.
Block Channel
LOCK
ꔂ Move
ꔉ Enter
• Set Password
Favorite Group:
DTV
3-1
• Lock System
: On
• Block Channel
• Movie Rating
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
• Input Block
A
TV
page 1/1
Cable DTV
Cable TV
5-1
7-1
ꔉ
ꔀ
ꔉ CH.Change
ꔂ Navigation
ꘃ Page Change
ꕉ Previous
ꔅ Block/Unblock
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
Select Block Channel.
ENTER
5
YELLOW
6
BACK
PARENTAL CONTROL / RATING
164
EXIT
Select a channel to block or unblock.
Block or unblock a channel.
Return to the previous menu.
Return to TV viewing.
ꔛ
If a channel is locked, enter the
password to unlock it temporarily.
Movie & TV Rating
Movie Rating (MPAA)- For USA
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies.
You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such
as soap operas.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
: On
• Lock System
• Block Channel
Blocking off : Permits all
programs
• Block Channel
• Movie Rating
• Movie Ratingꔉ
G
• TV Rating-Children
• TV Rating-Children
PG
• TV Rating-General
• TV Rating-General
PG-13
• Downloadable Rating
• DownloadableRRating
• Input Block
• Input Block NC-17
ꔉ
ꔀ
: On
X
Blocking Off ꔓ
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
Select Movie Rating.
ENTER
5
EXIT
Return to the previous menu.
Return to TV viewing.
PARENTAL CONTROL / RATING
BACK
Select G, PG, PG-13, R, NC-17, X, or
Blocking Off.
If Movie Rating, TV Rating-Children
or TV Rating-General is locked, enter
the password to unlock it temporarily.
ꔛ G (General audience)
ꔛ PG (Parental guidance suggested)
ꔛ PG-13 (Parents strongly cautioned)
ꔛ R (Restricted)
ꔛ NC-17 (No one 17 and under admitted)
ꔛ X (Adult only)
ꔛ Blocking Off (Permits all programs)
ꔛ If you set PG-13: G and PG movies
will be available, PG-13, R, NC-17 and
X will be blocked.
ꔛ
165
PARENTAL CONTROL / RATINGS
TV Rating Children - For USA
revents children from watching certain children's TV programs, according to the ratings limit set. The
P
children rating does not apply to other TV programs. Unless you block certain TV programs intended
for mature audiences in the TV Rating - sub menu, your children can view those programs.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
1
MENU
2
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
3
• Set Password
: On
• Lock System
: On
• Block Channel
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-Children
Fantasy Violence
• TV Rating-Childrenꔉ
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
ENTER
ꔉ
ꔀ
Select Lock.
Input the password.
PARENTAL CONTROL / RATING
166
Select TV Rating-Children.
ENTER
Select Age or Fantasy Violence.
ENTER
Select block options.
6
BACK
EXIT
ꔉ Enter
• Lock System
0
5
ꔂ Move
ꔛ
ꔛ
1
4
LOCK
Return to the previous menu.
Return to TV viewing.
Age
ꔉ
Close
Age (applies to TV-Y, TV-Y7)
Fantasy Violence (applies to TV-Y7)
TV Rating General - For USA
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
: On
• Lock System
: On
• Block Channel
• Block Channel Age
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
Language
• TV Rating-General
ꔉ
ꔀ
ꔉ
Dialogue
• TV Rating-Generalꔉ
Sex
• Downloadable Rating
• Downloadable Rating
Violence
• Input Block
• Input Block
Close
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
5
Select TV Rating-General.
ENTER
Select Age, Dialogue, Language, Sex
or Violence.
ENTER
Select block options.
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
PARENTAL CONTROL / RATING
6
Age (applies to TV-G,T V-PG,T V14,TV-MA).
ꔛ Dialogue-sexual dialogue (applies to
TV-PG,TV-14).
ꔛ Language-adult language (applies to
TV-PG, TV-14, TV-MA).
ꔛ Sex-sexual
situations (applies to
TV-PG, TV-14, TV-MA).
ꔛ Violence (applies to TV-PG, TV-14,
TV-MA).
ꔛ
167
PARENTAL CONTROL / RATINGS
TV Rating English - For CANADA, Philippines
Selecting Canadian English rating system.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
LOCK
ꔂ Move
• Set Password
• Lock System
: On
• Block Channel
• TV Rating-English
• TV Rating-French
Blocking off : Permits all
programs
• Lock System
: On
• Block Channel
• TV Rating-English
• TV Rating-French
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
• Key Lock
: Off
• Key Lock
: Off
ꔉ
ꔀ
ꔉ Enter
E
C
C8+
G
PG
14+
18+
Blocking Off ꔓ
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
Select TV Rating-English.
ENTER
5
BACK
PARENTAL CONTROL / RATING
168
EXIT
Select E, C, C8+, G, PG, 14+, 18+, or
Blocking Off.
Return to the previous menu.
Return to TV viewing.
If TV Rating-English or TV RatingFrench is locked, enter the password
to unlocked it temporarily.
ꔛ E (Exempt)
ꔛ C (Children)
ꔛ C8+ (Children eight years and older)
ꔛ G (General programming, suitable
for all audiences)
ꔛ PG (Parental Guidance)
ꔛ 14+ (Viewers 14 years and older)
ꔛ 18+ (Adult programming)
ꔛ Blocking Off (Permits all programs)
ꔛ
TV Rating French - For CANADA, Philippines
Selecting Canadian French rating system.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
LOCK
ꔂ Move
• Set Password
ꔉ Enter
Blocking off : Permits all
programs
• Lock System
: On
• Lock System
: On
• Block Channel
• Block Channel
• TV Rating-English
• TV Rating-English E
• TV Rating-French
• Downloadable Rating
• TV Rating-French G
• Downloadable Rating8ans+
• Input Block
• Input Block
13ans+
• Key Lock
: Off
• Key Lock
: Off
16ans+
ꔉ
ꔀ
18ans+
Blocking Off ꔓ
1
MENU
ENTER
Select Lock.
E (Exempt)
G (General)
ꔛ 8ans+ (General-Not convenient for
little children)
ꔛ 13ans+ (Not convenient for children
of 13 years and younger)
ꔛ 16ans+ (Not convenient for children
of 16 years and younger)
ꔛ 18ans+ (This programs is only for
adults)
ꔛ Blocking Off (Permits all programs)
ꔛ
ꔛ
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
Input the password.
0
3
4
Select TV Rating-French.
ENTER
5
BACK
Return to the previous menu.
Return to TV viewing.
PARENTAL CONTROL / RATING
EXIT
Select E, G, 8ans+, 13ans+, 16ans+,
18ans+, or Blocking Off.
169
PARENTAL CONTROL / RATINGS
Downloadable Rating
This
function is available only for digital channels.
This function operates only when TV has received Region5 Rating data.
LOCK
ꔂ Move
ꔉ Enter
• Set Password
LOCK
ꔂ Move
ꔉ Enter
• Set Password
• Lock System
: On
• Lock System
: On
• Block Channel
• Block Channel
• Movie Rating
Humor
• Movie Rating
• TV Rating-Children
Sport
• TV Rating-Children
• TV Rating-General
• Downloadable Rating
Cruelty
• TV Rating-General
Language
• Downloadable
Ratingꔉ
• Input Block
ꔉ
ꔀ
ꔉ
• Input Block Sadness
Genre
Age
ꔍ
Close
ꔛ
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
PARENTAL CONTROL / RATING
170
4
5
Select Downloadable Rating.
ENTER
Select desired Downloadable Rating
option.
ENTER
Select desired option and block it.
6
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
ꔛ
Based on rating table, your TV's
OSD (On Screen Display) may differ slightly from what is shown in
this manual.
If a Downloadable rating is locked,
enter the password to unlock it temporarily.
External Input Blocking
Enables you to block an input.
LOCK
ꔂ Move
ꔉ Enter
LOCK
ꔂ Move
ꔉ Enter
• Lock System
: On
• Lock System
• Block Channel
• Movie Rating
• AV1
• Block Channel
•
AV2
• Movie
Rating
• TV Rating-Children
• TV •Rating-Children
Component1
• TV Rating-General
• Downloadable Rating
• Input Block
• TV Rating-General
• Component2
• Downloadable Rating
• RGB-PC
• Input Block
• Key Lock
: Off
• Key Lock
: Off • HDMI1
Off
• HDMI2
Off
ꔉ
ꔀ
: On
◀
Off
▶
Off
Off
Off
Off
• HDMI3
Off
• HDMI4
Off
Close
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
Select Input Block.
ENTER
5
Select input source.
6
BACK
EXIT
Return to the previous menu.
Return to TV viewing.
PARENTAL CONTROL / RATING
Select On or Off.
171
PARENTAL CONTROL / RATINGS
Key Lock
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
LOCK
ꔂ Move
ꔉ Enter
LOCK
ꔂ Move
• Lock System
: On
• Lock System
: On
• Block Channel
• Block Channel
• Movie Rating
• Movie Rating
• TV Rating-Children
• TV Rating-Children
• TV Rating-General
• TV Rating-General
• Downloadable Rating
• Downloadable Rating
• Input Block
• Input Block
• Key Lock
: Off
• Key Lock
: On
ꔠ
ꔉ
□ Off
ꔑ On
1
MENU
2
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
ENTER
Select Lock.
Input the password.
0
3
4
PARENTAL CONTROL / RATING
172
Select Key Lock.
ENTER
5
BACK
EXIT
Select On or Off.
Return to the previous menu.
Return to TV viewing.
ꔉ Enter
ꔠ
ꔉ
ꔠ
ꔉ
In Key Lock ‘On’, if the TV is turned
off, press the / I, INPUT, CH (ꔌꔍor
ꕌꕍ) button on the TV or POWER,
INPUT, CH (ꕌꕍ) or NUMBER buttons on the remote control.
ꔛ With the Key Lock On, the display
‘ ! Key Lock’ appears on the screen
if any button on the front panel is
pressed while viewing the TV.
ꔛ
Appendix
Troubleshooting
Abnormal Operation
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
ꔛ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
ꔛ Ensure that the correct remote operating mode is set: TV, VCR etc.
ꔛ Install new batteries.
*This feature is not available for all models.
ꔛ
The remote control
doesn’t work
Is the sleep timer set?
Check the power control settings. Power interrupted.
ꔛ If there is no signal, the TV turns off automatically in 15 minutes.
ꔛ
TV turns off suddenly
ꔛ
Video Problems
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
ꔛ Is the power cord inserted into wall power outlet?
ꔛ Check your antenna direction and/or location.
ꔛ Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
ꔛ
ꔛ
No picture &No sound
Picture appears slowly
after switching on
ꔛ
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
Adjust Color in menu option.
ꔛ Keep a sufficient distance between the product and the VCR.
ꔛ Try another channel. The problem may be with the broadcast.
ꔛ Are the video cables installed properly?
ꔛ Activate any function to restore the brightness of the picture.
ꔛ
No or poor color or
poor picture
Poor reception on
some channels
Lines or streaks in pictures
No picture when connecting HDMI
ꔛ
Check for local interference such as an electrical appliance or power
tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
ꔛ Check for sources of possible interference.
ꔛ
ꔛ
ꔛ
Check antenna (Change the direction of the antenna).
ꔛ
If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers
or no screen display. In this case use the latest cables that support High
Speed HDMI.
Appendix
Horizontal/vertical bars
or picture shaking
173
Appendix
Audio Problems
No output from one
of the speakers
Unusual sound from
inside the product
No sound
when connecting
HDMI/USB
ꔛ
Adjust Balance in menu option.
ꔛ
A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault
with the product.
Check High Speed HDMI cable.
Check USB cable over version 2.0.
ꔛ Use normal MP3 file.
*This feature is not available for all models.
ꔛ
ꔛ
PC Mode Problems
The signal is out of
range
Vertical bar or stripe
on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable or single color
When connecting the
HDMI cable to the PC,
there is no audio.
Appendix
174
ꔛ
ꔛ
Adjust resolution, horizontal frequency, or vertical frequency on the PC.
Check the input source.
ꔛ
Activate the Auto configure feature or adjust size, phase, or H/V position.
(Option)
ꔛ
Check the signal cable.
Reinstall the PC video card.
ꔛ
ꔛ
Check the manual for the video card in the PC to see if it supports
HDMI audio and how to set it up properly.
Movie List Problems
The file does not
appear on the Movie
List.
Message is displayed
saying “This file is
invalid” or the audio is
working normally but
the video is not working normally.
Message is displayed
saying “Unsupported
Audio” or the video is
working normally but
the audio is not working normally.
ꔛ
Check whether the file extension is supported.
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
ꔛ Check whether the resolution is supported.
ꔛ Check whether the video/audio codec is supported.
ꔛ Check whether the frame rate is supported.
ꔛ
Check whether the
file is damaged.)
ꔛ Check whether the
ꔛ Check whether the
ꔛ Check whether the
ꔛ
file is playing normally on a PC. (Check whether the
audio codec is supported.
bit rate is supported.
sample rate is supported.
Check whether the file is playing normally on a PC. (Check whether the
file is damaged.)
ꔛ Check whether the video file and subtitle file name are the same.
ꔛ Check whether the video file and subtitle file are located in the same
folder.
ꔛ Check whether the subtitle file is supported.
ꔛ Check whether the language is supported. (When you open the subtitle
file on a PC, you can check the language of the subtitle file.)
ꔛ
Subtitle is not working.
Appendix
175
Appendix
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you
can enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
2
ere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of
H
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s
almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
!
ꔛ
ꔛ
?
!
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
?
Extended Absence
CAUTION
►If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
Appendix
176
PRODUCT SPECIFICATIONS
47LX9500
(47LX9500-UA)
55LX9500
(55LX9500-UA)
1085.9 mm x 710.6 mm x 255.0 mm
(42.7 inch x 27.9 inch x 10.0 inch)
1255.8 mm x 805.0 mm x 255.0 mm
(49.4 inch x 31.6 inch x 10.0 inch)
1085.9 mm x 654.2 mm x 31.6 mm
(42.7 inch x 25.7 inch x 1.2 inch)
1255.8 mm x 749.6 mm x 31.6 mm
(49.4 inch x 29.5 inch x 1.2 inch)
With stand
26.7 kg (58.8 lbs)
32.7 kg (72.0 lbs)
Without stand
22.1 kg (48.7 lbs)
28.1 kg (61.9 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
Power requirement
AC 100 - 240 V~ 50/60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
ꔛ The
75 Ω
Less than 85 %
specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
177
Appendix
MODELS
55LEX8
(55LEX8-UA)
Dimensions
(Width x
Height
x Depth)
With stand
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
1306.0 mm x 867.0 mm x 345.0 mm
(51.4 inch x 34.1 inch x 13.5 inch)
Without stand
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
1306.0 mm x 797.0 mm x 30.7 mm
(51.4 inch x 31.3 inch x 1.2 inch)
Weight
With stand
22.9 kg (50.4 lbs)
34.5 kg (76.0 lbs)
Without stand
19.6 kg (43.2 lbs)
28.8 kg (63.4 lbs)
60LEX9
(60LEX9-UA)
72LEX9
(72LEX9-UA)
With stand
1126.6 mm x 757.9 mm x 284.4 mm
(44.3 inch x 29.8 inch x 11.1 inch)
1306.0 mm x 867.0 mm x 345.0 mm
(51.4 inch x 34.1 inch x 13.5 inch)
Without stand
1126.6 mm x 692.0 mm x 29.3 mm
(44.3 inch x 27.2 inch x 1.1 inch)
1306.0 mm x 797.0 mm x 30.7 mm
(51.4 inch x 31.3 inch x 1.2 inch)
With stand
22.9 kg (50.4 lbs)
34.5 kg (76.0 lbs)
Without stand
19.6 kg (43.2 lbs)
28.8 kg (63.4 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
Weight
Power requirement
AC 120 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
ꔛ The
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
Appendix
178
47LEX8
(47LEX8-UA)
Less than 85 %
specifications shown above may be changed without prior notice for quality improvement.
50PK950
(50PK950-UA, 50PK950-UF)
50PX950
(50PX950-UA, 50PX950-UF)
60PK950
(60PK950-UA, 60PK950-UF)
60PX950
(60PX950-UA, 60PX950-UF)
1190.0 mm x 804.5 mm x 294.5 mm
(46.8 inch x 31.6 inch x 11.5 inch)
1408.8 mm x 937.9 mm x 384.0 mm
(55.4 inch x 36.9 inch x 15.1 inch)
1190.0 mm x 737.0 mm x 52.4 mm
(46.1 inch x 29.0 inch x 2.0 inch)
1408.8 mm x 860.7 mm x 52.4 mm
(55.4 inch x 33.8 inch x 2.0 inch)
With stand
34.8 kg (76.7 lbs)
50.9 kg (112.2 lbs)
Without stand
30.2 kg (66.5 lbs)
43.3 kg (95.4 lbs)
MODELS
Dimensions
(Width x
Height
x Depth)
With stand
Without stand
Weight
Power requirement
AC 100-240 V ~ 50 / 60 Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance
Environment
condition
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
ꔛ The
75 Ω
Less than 85 %
specifications shown above may be changed without prior notice for quality improvement.
Appendix
179
Appendix
IR Codes
*This feature is not available for all models.
1. How to Connect
Lead code
ꔛ
High custom code
Lead code
Lead code
Lead code
Lead
Leadcode
code
Lead code
code Low
custom Low
code
Lead
Data code
Data code
Data code
High custom High
code custom code
Data code
Data code
High custom code
Data code
Data code
High
Data
Data
Highcustom
customcode
code
Datacode
code
Datacode
code
High custom
Data code
Data code
High code
2.Remote
IR Codes
Lead Control
Low
ꔛ
Data code
Connect your wired remote control to the Remote Control port on the TV.
Data code
custom code
Data code
High
High
Data code
Data code
Data code
Data code
Low
High code custom code
code code custom code custom
custom
Low
High
code
code
Low
High
C0
C1
C2
C3 C4 C5 C6 C7Data
D0 D1
D2 D3 D4 D5 D6 Data
D7
D0
D1 D2 D3 D4 D5 D6 D7
Data
code
Data
code
custom
code
custom
code
Data
code
Data
code
Low
High
custom
custom
code
customcode
code
custom
code
C0
D1
D1
Data
code
Data
code
C0 C1
C2 C3
C4C1
C5C2
C6C3
C7C4
D0C5
D1C6
D2C7
D3D0
D4
D5D2
D6D3
D7D4
D0D5
D1D6
D2D7
D3D0
D4
D5D2
D6D3
D7D4 D5 D6 D7
custom code
code
C0 custom
C1 C2 C3
C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
C0
D3
D4
D5
D6
D7
D0
D1
D2
D3
D4
D5
D6
D7
C0C1
C1 C2
C2C3
C3C4
C4C5
C5C6
C6C7
C7D0
D0D1
D1 D2
D2
D3
D4
D5
D6
D7
D0
D1
D2
D3
D4
D5
D6
D7
Lead
code
Low
code
High
custom
code
Data code
C0 C1 C2 C3 C4 C5 C6 C7
D0code
D1 D2
D3
D4
D5
D6custom
D7
D0custom
D1
D2 High
D3
D4
D5 code
D6code
D7
Lead
code
Low
custom
code
custom
Data code
Lead
Low
custom
code
High
code
Data
Tc
Tc
Tc
Lead code Lead
Low
custom
code
High
custom
code
Data
code
code
Low
custom
code
High
custom
code
Data
code
Lead
code
Low
custom
code
High
custom
code
Data
code
Lead
code
Low
custom
code
High
custom
code
Data
code
Tc
Lead code Low custom code High custom code Data code
Tc
Tc
Lead
Leadcode
codeLow
Lowcustom
customcode
code High
Highcustom
customcode
codeData
Datacode
code
Lead
Tc
Leadcode
codeLow
Lowcustom
customcode
code High
Highcustom
customcode
codeData
Datacode
code
Lead code Low custom code High custom code Data code
T1
T1
T1 T1
T1
T1
T1
Lead
Lead
code
Lead
Lead
code
Lead
code
code
code
Output waveform
Single pulse, modulated with 37.917 KHz signal at 455 KHz
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
ꔛ
Configuration of frame
Data code
Data code
Lead
code
Low custom code
High custom High
code custom code
Data code
Data code
Low
custom code
High custom code
Data code
Data code
Low custom code
High
code
Data
Data
Low
custom
code
Highcustom
custom
code
Datacode
code Data code
Datacode
code
Lead
code
LowLow
custom
code code
High
custom
code
Data
code
Lead
code
custom
C2
C0
C2
C5
D0
D1D5D2
D1D5D2
D4 D5
D6 D7
C2 custom
C3C0
C4C1C5
C6C3
C7C4
C0C5
C1C6
C2C7
C3
C4C1C5
C6C3
C7C4
D0
D1C6
D2C7
D3
D4code
D6D3
D7D4
D0D5
D1D6
D2D7
D3D0
D4
D6D3
D7
High
custom
code
Data
Data
code
Lead code C0 C1 Low
code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
C0
C0C1
C1 C2
C2C3
C3C4
C4C5
C5C6
C6C7
C7C0
C0C1
C1 C2
C2C3
C3C4
C4C5
C5C6
C6C7
C7D0
D0D1
D1 D2
D2D3
D3D4
D4D5
D5D6
D6D7
D7D0
D0D1
D1 D2
D2D3
D3D4
D4D5
D5D6
D6D7
D7
C0 C1
C6C5
C7C6
C0 C7
C1 C0
C2 C3
D0C6
D1 C7
D2 D0
D3 D1
D4 D5
D2D7
D3D0
D4 D1
D5 D2
D6 D7
C1 C3
C2C4
C3C5C4
C1 C4
C2C5
C3C6
C4C7C5
D2D6
D3D7
D4D0
D5D1D6
D3 D4 D5 D6
C0 C2
Lead code
1st
frame
Lead
code
Lead code
Repeat frame
Repeat code Repeat code
Repeat code
Repeat
Repeat code
code
Repeat code
Tf
Tf
Tf
Tf
Tf
Tf
Repeat code
ꔛ
9 ms
9 ms
9 ms
99ms
ms
9 ms
ꔛ
9 ms
Repeat code
Appendix
ꔛ
4.5 ms
4.5 ms
4.5 ms
4.5
4.5ms
ms
4.5 ms
4.5 ms
0.55 ms
0.55 ms
0.55
0.55ms
ms
0.55 ms
9 ms
9 ms
9 ms
99ms
ms
9 ms
2.25 ms
2.25 ms
2.25
2.25ms
ms
2.25 ms
Frame
0.55 ms
2.25 ms
0.55 ms
Bit description: Tf
Bit ”0”
ꔛ
Tf
Lead code
Bit ”1”
0.56 ms
0.56 ms
9 ms
0.56 ms
0.56
0.56ms
ms
0.56 ms
1.12 ms
1.12 ms
1.12 ms
1.12
1.12ms
ms
1.12 ms
2.25 ms
0.56 ms
0.56 ms
0.56
0.56ms
ms
0.56 ms
interval: Tf
0.56 ms
2.24 ms
2.24 ms
2.24
2.24ms
ms
2.24 ms
2.24 ms
The waveform is transmitted
asTf long as a key Tf
is depressed.
Tf
Tf
Tf
Tf
Tf
Tf
Tf
Tf
Tf
Tf
0.56 ms
180
1.12 ms
0.56 ms
Tf=108
Tf=108 ms @455
KHzms @455 KHz
Tf=108 ms @455 KHz
Tf=108
Tf=108ms
ms@455
@455KHz
KHz
Tf=108 ms @455 KHz
2.24 ms
D7
Code Function
Note
Function
Note
00
CH ꕌ
Remote Control Button
B0
ꕖ
Remote Control Button
01
CH ꕍ
Remote Control Button
B1
ꕗ
Remote Control Button
02
VOL +
Remote Control Button
BA
ꕘ
Remote Control Button
03
VOL -
Remote Control Button
D6
TV
Discrete IR Code
06
>
Remote Control Button
07
<
Remote Control Button
(Hexa)
(TV Input Selection)
C4
POWER ON
Remote Control Button
08
(Power On/Off)
MUTE/DELETE
Remote Control Button
0B
INPUT
Remote Control Button
0F
TV
Remote Control Button
10-19
Number 0-9
Remote Control Button
1A
FLASHBK
Remote Control Button
1E
FAV/MARK
Remote Control Button
28
BACK
Remote Control Button
30
AV MODE
Remote Control Button
40
ꕌ
Remote Control Button
41
ꕍ
Remote Control Button
43
MENU
Remote Control Button
44
ENTER
Remote Control Button
45
Q.MENU
Remote Control Button
4C
- (Dash)/LIST
Remote Control Button
5B
EXIT
Remote Control Button
58
WIDGETS
Remote Control Button
59
NETCAST
Remote Control Button
61
BLUE/(L/R SELECT) Remote Control Button
63
YELLOW
Remote Control Button
71
GREEN
Remote Control Button
72
RED
Remote Control Button
79
RATIO
Remote Control Button
7E
SIMPLINK
Remote Control Button
8E
ꕙ
Remote Control Button
8F
ꕚ
Remote Control Button
95
ENERGY SAVING Remote Control Button
AA
INFO
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
(Only Power Off)
5A
AV1
Discrete IR Code
(AV1 Input Selection)
D0
AV2
BF
COMPONENT1
Discrete IR Code
(AV2 Input Selection)
Discrete IR Code
(Component1 Input Selection)
D4
COMPONENT2
Discrete IR Code
(Component2 Input Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
CE
HDMI1
Discrete IR Code
(HDMI1 Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
E9
HDMI3
Discrete IR Code
(HDMI3 Input Selection)
DA
HDMI4
76
Ratio 4:3
Discrete IR Code
(HDMI4 Input Selection)
Discrete IR Code
(Only 4:3 Mode)
77
Ratio 16:9
Discrete IR Code
AF
Ratio Zoom
Discrete IR Code
(Only 16:9 Mode)
Appendix
09
ꔛ Use
Code
(Hexa)
(Only Zoom Mode)
DC
3D
Remote Control Button
Remote Control Button
this feature depending on your models.
181
Appendix
External Control through RS-232C
The RS-232C port allows you connect the RS-232C input jack to an external control device (such as
a computer or an A/V control system) to control the TV’s functions externally.
ꔛ Note:
RS-232C on this unit is intended to be used with third party RS-232C control hardware and
software.
The instructions below are provided to help with programming software or to test functionality using
telenet software.
RS-232C Setup
i.e)
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/DVI IN
LAN
3
AUDIO IN
ꔡ
1
WIRELESS
CONTROL
VIDEO L(MONO) AUDIO R
AUDIO OUT
2
Y
PB
PR
L
R
1
AUDIO
VIDEO
AV IN 1 COMPONENT IN
(RGB/DVI) OPTICAL DIGITAL
2
Communication Parameters
Type of Connector; D-Sub 9-Pin Male
No.
Appendix
182
1
2
3
4
5
6
7
8
9
PC
Baud rate : 9600 bps (UART)
ꔛ Data
length : 8 bits
ꔛ Parity
: None
ꔛ Stop
bit : 1 bit
ꔛ Communication
code : ASCII code
ꔛ Use
a crossed (reverse) cable.
Pin Name
ꔛ
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
!
No Connection
1
5
6
9
?
! NOTE
►This product has command echo back in
the RS-232C Command.
?
RS-232C Configurations
7-Wire Configuration
(Serial female-female NULL modem cable)
PC
TV
RXD TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
PC
TV
RXD TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping’.
OPTION
ꔂ Move
ꔉ Enter
• Language
• Caption
OPTION
ꔂ Move
ꔉ Enter
• Language
: Off
• Caption
• Power Indicator
: Off
• Power Indicator
• Initial Setting
• Initial Setting
• Set ID
:1
• Mode Setting
: Home Use
ꔉ
ꔀ
• Set ID
:1
• Mode Setting
: Home Use
◀
1
▶
Close
1
2
ENTER
ENTER
4
BACK
EXIT
Select Option.
Select Set ID.
Choose the desired TV ID number.
The adjustment range of Set ID is
1~ 99.
Real data mapping
ꔛ
0
Step 0
A
Step 10 (Set ID 10)
F
Step 15 (Set ID 15)
10
Step 16 (Set ID 16)
63
Step 99 (Set ID 99)
64
Step 100
Appendix
3
MENU
Return to the previous menu.
Return to TV viewing.
183
Appendix
Command Reference List
Transmission / Receiving Protocol
COMMAND1
COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 - 01
02. Input Select
x
b
► P.185
03. Aspect Ratio
k
c
► P.185
04. Screen Mute
k
d
00 - 01
05. Volume Mute
k
e
00 - 01
06. Volume
Control
k
f
00 - 64
07. Contrast
k
g
00 - 64
08. Brightness
k
h
00 - 64
09. Color
k
i
00 - 64
10. Tint
k
j
00 - 64
11. Sharpness
k
k
00 - 64
12. OSD Select
k
l
00 - 01
13. R
emote
Control Lock
Mode
k
m
00 - 01
14. Treble
k
r
00 - 64
15. Bass
k
s
00 - 64
16. Balance
k
t
00 - 64
17. C
olor
Temperature
x
u
00 - 64
18. ISM Method
j
p
► P.186
19. Energy Saving
j
q
► P.186
20. A
uto
j
Configuration
u
► P.186
22. C
hannel Add/
Del
m
b
00 - 01
23. Key
m
c
► P.187
24. Backlight
m
g
00 - 64
For Plasma TV
For LED LCD TV
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set. (j,
k, m or x)
[Command 2] : Second command to control the
set.
[Set ID] : You can adjust the set ID to choose
desired TV ID number in Setup menu.
Adjustment range is 1-99. When selecting
Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal
(1-99) on menu and as Hexa decimal (0x0
- 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the ‘FF’ data to read status of
command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
* In this model, TV will not send the status during the
standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
Appendix
184
21.
Channel
Tuning
COMMAND1
COMMAND2
DATA00
(Hexadecimal)
DATA01
(Hexadecimal)
m
a
physical
program
high
major
program
low
DATA02
(Hexadecimal)
DATA03
(Hexadecimal)
DATA04
(Hexadecimal)
DATA05
(Hexadecimal)
major low
minor
high
minor low
attribute
he TV transmits ACK (acknowledgement) based
T
on this format when receiving abnormal data from
non-viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, TV will not send the status during the
standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send
the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will
send the ‘a’, ‘b’.
[NG] : Use the large character
01.Power (Command: k a)
05. Volume Mute (Command: k e)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
Data 01: Power On
02. Input Select (Command: x b)
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
To select input source for TV.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna)Data 01: DTV (Cable)
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Data 20: AV1
07. Contrast (Command: k g)
Data 40: Component1 Data 41: Component 2
Data 42: Component 3 Data 60: RGB-PC
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Data 90: HDMI1
Data 91: HDMI2
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data 92: HDMI3
Data 93: HDMI4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
* Use the feature depending on your model.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Data 21: AV 2
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data 02: 16:9 Data 04: Zoom Data 06: Set by program Data 1F: Cinema Zoom16
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Data 09: Just scan
Data 10: Cinema Zoom1
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust screen color.
You can also adjust color in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Data 00: Screen mute off (Picture on), Video-out Mute off
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Data 01: Screen mute on (Picture off)
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On
Screen Display (OSD). But, in case of screen mute
on, TV will not display On Screen Display (OSD).
04. Screen Mute (Command: k d)
To select screen mute on/off.
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 - Green: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
Appendix
185
Appendix
11. Sharpness (Command: k k)
17. Color Temperature (Command: x u)
To adjust screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
To adjust color temperature.
You can also adjust color temperature in the Picture
menu.
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Warm: 00 - Cool: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
18. ISM Method (Command: j p) (For Plasma TV)
To avoid having a fixed image remain on screen.
Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
Data 08: Normal
13. Remote Control Lock Mode (Command: k m)
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
To lock the remote control and the front panel controls on the set.
19. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Off Data 01: Minimum
Data 02: Medium
Data 03: Maximum
Data 04: Auto/Intelligent Sensor (depending on model)
Data 05: Screen off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
Data 01: OSD on
Data 01: Lock on
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power
is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn
on by POWER button of remote control and on the TV.
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the Audio menu.
04: White Wash
20: Color Wash
20. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in
RGB-PC mode.
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data 01: To set
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
To tune channel to following physical/major/minor number.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the Audio menu.
Appendix
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
21. Channel Tuning (Command: m a)
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel to the Major number, the Physical
number is not required when sending a command.
Data 00: Physical Channel Number
NTSC air: 02 - 45, NTSC cable: 01, 0E - 7D
ATSC air: 01 - 45, ATSC cable: 01 - 87
Data 01 & 02: Major Channel Number
Data 01: High byte
Data 02: Low byte
T
wo bytes are available for the Major and Minor,
normally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
186
Data5: 7
6
5
Main/Sub
Picture
Two/One Part
Channel
Using Physical
Channel
0 Main
0 Two
1 Sub
1 One
Step
4
Reserved
3
2
1
0
0 Use
x
0
0
0
0
NTSC Air
1 No Use
x
0
0
0
1
NTSC Cable
x
0
0
1
0
ATSC Air
x
0
0
1
1
ATSC Cable_std
x
0
1
0
0
ATSC Cable_hrc
x
0
1
0
1
ATSC Cable_irc
x
0
1
1
0
ATSC cable_auto
x
0
1
1
1
Reserved
x
x
x
x
x
...
x
1
1
1
1
Reserved
The table above lists the binary code which must be
converted to Hexadecimal before sending. For example: The binary code to tune the sub source to an
NTSC cable channel is “1000 0001”, which translates
to “81” in Hex.
22. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
* 7th bit : For which source do you want to change the
channel.
Data 00: Channel DeleteData 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
*6
th bit: Use a two part or one part channel. Most
cases just use 0 since it’s ignored when using
NTSC.
23. Key (Command: m c)
*5
th bit: Use 0 with NTSC since it can only use the
physical channel number. Normally use 1 for ATSC
since most times it doesn’t matter what the physical
number is.
To send IR remote control code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
See page 181.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
24. Backlight (Command: m g) (For LED LCD TV)
To adjust screen backlight.
*Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
Data 00 = Physical of 35 = 23
*Refer to ‘Real data mapping’.
Data 01 & 02 = No Major = 00 00
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Data 03 & 04 = No Minor = 00 00
Data 05 = 0000 0001 in binary = 01
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
Appendix
Acknowledgement[a][ ][Set ID][ ][OK][Data00]
[Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ]
[NG][Data00][x]
187
Appendix
Open Source Software Notice
The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/
LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, jfsutils, lzo, msdl-1.1, mtd-utils, ntpclient, procps
LGPL LIBRARIES:
Atk, cairo, directFB, ffmpeg, glib, GnuTLS, gtk+, iconv, libintl, libgcrypt, libgpg-error, libsoup, libusb, pango,
uClibc, webkit
MPL LIBRARIES:
Nanox, spidermonkey
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics :
opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by LG
Electronics
You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
Also you can obtain the translation of GPL, LGPL licenses from
http://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html,
http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
Appendix
188
This product includes other open source software.
► boost C++: software developed by http://www.boost.org distributed under the Boost Software License,
Version 1.0
► c-ares : copyright © 1998 by the Massachusetts Institute of Technology
► expat:
- copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
- copyright © 2001-2007 Expat maintainers.
► fontconfig: copyright © 2001, 2003 Keith Packard
► freetype: copyright © 2003 The FreeType Project (www.freetype.org).
► ICU: copyright © 1995-2008 International Business Machines Corporation and others.
► libcurl: copyright © 1996 - 2008, Daniel Stenberg.
► libjpeg: This software is based in part on the work of the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
► libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
► libpng: copyright © 1998-2008 Glenn Randers-Pehrson
► libupnp: copyright © 2000-2003 Intel Corporation
► libxml2 : copyright © 1998-2003 Daniel Veillard
► libxslt: copyright © 2001-2002 Daniel Veillard
► lua interpreter: copyright © 1994–2008 Lua.org, PUC-Rio
► md5: copyright © 1991-2, RSA Data Security, Inc
►o
penSSL:
- cryptographic software written by Eric Young.
- software written by Tim Hudson.
- software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
► pixman:
- copyright © 1987, 1988, 1989, 1998 The Open Group
- copyright © 1987, 1988, 1989 Digital Equipment Corporation
- copyright © 1999, 2004, 2008 Keith Packard
- copyright © 2000 SuSE, Inc.
- copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
- copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
- copyright © 2004 Nicholas Miell
- copyright © 2005 Lars Knoll & Zack Rusin, Trolltech
- copyright © 2005 Trolltech AS
- copyright © 2007 Luca Barbato
- copyright © 2008 Aaron Plattner, NVIDIA Corporation
- copyright © 2008 Rodrigo Kumpera
- copyright © 2008 André Tupinambá
- copyright © 2008 Mozilla Corporation
- copyright © 2008 Frederic Plourde
► portmap: copyright © 1983,1991 The Regents of the University of California.
► tiff: copyright © 1987, 1993, 1994 The Regents of the University of California.
► tinyxml: copyright © 2000-2006 Lee Thomason
► xyssl:
- Copyright © 2006-2008 Christophe Devine
- Copyright © 2009 Paul Bakker
► zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Appendix
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the "Software"), to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and
to permit persons to whom the Software is furnished to do so, subject to the following conditions:
189
Appendix
Note
Appendix
190
Note
Appendix
191
Download PDF