LG | 60PN6500 | LG 50PN4500 Owner’s Manual

OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
PN45**
PN65**
*MFL67648603*
www.lg.com
P/NO : MFL67648603 (1404-REV08)
Printed in Korea
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
Safety Instructions
29
SPECIFICATIONS
8
Installation Procedure
31
LICENSES
8
ASSEMBLING AND PREPARING
31
8
12
13
14
15
15
16
17
19
20
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
- Detaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
OPEN SOURCE SOFTWARE
NOTICE
31
External control device
setup
20
MAKING CONNECTIONS
21
21
22
22
23
24
24
24
Antenna Connection
HDMI Connection
DVI to HDMI connection
Component Connection
Composite Connection
Audio Connection
- Digital optical audio connection
USB Connection
25
REMOTE CONTROL
27
Using the User guide
28
MAINTENANCE
28
28
28
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
28
TROUBLESHOOTING
WARNING
y y If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
y y If you ignore the caution message, you
may be slightly injured or the product
may be damaged.
NOTE
y y The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y yDo not place the TV and/or remote control
in the following environments:
- -A location exposed to direct sunlight
- -An area with high humidity such as a
bathroom
- -Near any heat source such as stoves
and other devices that produce heat
- -Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
- -An area exposed to rain or wind
- -Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
y yInsert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
y yEnsure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
y yDo not place the product where it might
be exposed to dust.
This may cause a fire hazard.
y yDo not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or electric
shock.
y yMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
y yBend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside the
Product and could give an electric shock.
y yDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
y yWhen mounting TV onto wall make sure
to neatly install and isolate cabling from
rear of TV as to not create possibility of
electric shock /fire hazard.
y yMake sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which
are not grounded on earth.) Otherwise
possibility you may be electrocuted or
injured.
y yDo not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
ENGLISH
ENG
Safety Instructions
3
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
y yDo not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
y yKeep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
y yDo not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service centre.
y yDo not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric shock
accident can occur.
Desic
cant
y yDo not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
y yDispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
y yDo not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
electrocuted. (Depending on model)
y yDo not put or store inflammable
substances near the product. There is a
danger of combustion/explosion or fire due
to careless handling of the inflammable
substances.
y yDo not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
y yNever touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.
y yNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
y yDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
SAFETY INSTRUCTIONS
y yUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
y yApparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
y yIf you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
y yIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
y yOnly use the attachments / accessories
specified by the manufacturer.
y yWhen installing the antenna, consult
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.
y yWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
CAUTION
y yInstall the product where no radio wave
occurs.
y yThere should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
y yDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
y yOnly use the specified type of battery.
This could cause damage to the remote
control.
y yDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
y yBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
y yDo not place non-rechargeable batteries
in charging device.
y yMake sure there are no objects between
the remote control and its sensor.
ENGLISH
ENG
y yIf any of the following occur, unplug the
product immediately and contact your
local service centre.
- -The product has been impacted by
shock
- -The product has been damaged
- -Foreign objects have entered the
product
- -The product produced smoke or a
strange smell
This may result in fire or electric shock.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
y ySignal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.
y yWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
y yDo not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
y yPlease follow the installation instructions
below to prevent the product from
overheating.
- -The distance between the product and
the wall should be more than 10 cm.
- -Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
- -Do not install the product on a carpet or
cushion.
- -Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
y yTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
y yPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
y yPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
y yProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
y yDo not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
y yAvoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
y yWhen cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
y yAs long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
SAFETY INSTRUCTIONS
y yWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
y yWhen moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
y yContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
y yRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
y yIf the product feels cold to the touch, there
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.
y yThe panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
y yYou may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
y yDisplaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene
from a video game) for a prolonged
time may cause damage to the screen,
resulting in retention of the image, which
is known as image sticking. The warranty
does not cover the product for image
sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours
for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
y yGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
ENGLISH
ENG
y yWhen unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.
7
8
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y y Image shown may differ from your TV.
y y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y y The available menus and options may differ from the input source or product model that you
are using.
y y New features may be added to this TV in the future.
y y The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
y y The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
Installation Procedure
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y y Do not use any unapproved items to ensure the safety and product life span.
y y Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
y y Some models have a thin film attached on to the screen and this must not be removed.
Remote control and
batteries (AAA)
(Depending on model)
(See p. 25, 26)
Owner’s manual
Ferrite core
(Depending on model)
(See p. 10)
ASSEMBLING AND PREPARING
9
ENGLISH
ENG
Desk-mount Screw
(Only 42PN45**)
(See p. 17)
Power Cord Holder
(Depending on model)
(See p. 20)
Power Cord
(Depending on model)
Screw for assembly
7 EA, M4 x 14
(Only 42PN45**)
(See p. 15)
Screw for assembly
7 EA, M5 x 16
(Only 50PN45**, 50/60PN65**)
(See p. 15)
Stand Body / Stand Base
(See p. 15)
or
Isolator
(Depending on model)
(See p. 11)
Protection Cover
(Only 50PN45**,50PN65**)
(See p. 16)
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y yThe items supplied with your product may vary depending on the model.
y yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
How to use the ferrite core
-If there are two ferrite cores, follow as shown in Figures 1-2 and 2-1(or 2-2).
-If there are three ferrite cores, follow as shown in Figures 1-1 and 2-1(or 2-2).
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once.
Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
[Figure 1-1]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
Place the ferrite core close to a wall plug.
[to a wall plug]
[Figure 1-2]
[to the TV]
2 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,
R cable & AV cable. Place the ferrite core close to the TV.
Wind the component Y, Pb, Pr, L, R cable & AV cable on the ferrite core once.
[to the TV]
[to an External
device]
10 mm(+ / - 5 mm)
[Figure 2-1]
Wind the PC audio cable on the ferrite core once.
[to an External
device]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
10 mm(+ / - 5 mm)
[Figure 2-2]
y yFor an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable
that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
*A
*B
10 mm
18 mm
ASSEMBLING AND PREPARING
11
y y Antenna Isolator Installation Guide
- - Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.
» » If there is a voltage difference between TV Set and GND of antenna signal, the antenna
contact might be heated and excessive heat might cause an accident.
- - You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- - Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a
cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ENGLISH
ENG
NOTE
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
LG Audio Device
Compatibility
LG Audio Device
PN45**
PN65**
•
•
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING
Screen
ENGLISH
ENG
Parts and buttons
13
LA
Buttons
Power indicator
Button
Description
Turns the power on or off.
Selects the highlighted menu option or confirms an input
S
Accesses the main menus, or saves your input and exits the menus.
Changes the input source
H
H
Adjusts the volume level.
Scrolls through the saved programmes.
AV IN 1
Remote control sensor
COMPONENT
IN
Speakers
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe
transportation regardless of its type and size.
y y When transporting a large TV, there should
be at least 2 people.
y y When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
y y Avoid touching the screen at all times, as
this may result in damage to the screen.
y y It is recommended to move the TV in the
box or packing material that the TV originally
came in.
y y Before moving or lifting the TV, disconnect
the power cord and all cables.
y y When holding the TV, the screen should face
away from you to avoid damage.
y y Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
y y When transporting the TV, do not expose the
TV to jolts or excessive vibration.
y y When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
y y Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
Stand
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Only 50PN45**,
50/60PN65**
1
3 EA
3
M5 x 16
Only 42PN45**
3 EA
M4 x 14
Stand Body
Front
Only 50PN45**,
50/60PN65**
4 EA
M5 x 16
Stand Base
Only 42PN45**
4 EA
M4 x 14
2
15
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Detaching the stand
(Only 50PN45**, 50PN65**)
1
CAUTION
y y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y y Make sure that the screws are inserted
correctly and fastened securely. If they
are not fastened securely enough, the
TV may tilt forward after being installed.
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
4 EA
M5 x 16
NOTE
y y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
y y When installing the wall mounting bracket,
use the Protection cover.
y y This will protect the opening from
accumulating dust and dirt.
2
Protection
cover
2
1 EA
M5 x 16
1
17
ASSEMBLING AND PREPARING
Adjusting the angle of the TV to suit view
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Securing the TV to a table
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
To secure the TV to a table, insert and tighten
the supplied screw on the rear of the stand.
(Only 42PN45**)
WARNING
y y To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
20˚
CAUTION
y y When adjusting the angle of the product,
watch out for your fingers.
» »Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
ENGLISH
ENG
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- - Leave a 10 cm (minimum) space from
the wall for proper ventilation.
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- - If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
y y Make sure that children do not climb on
or hang on the TV.
NOTE
y y Use a platform or cabinet that is strong
and large enough to support the TV
securely.
y y Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
WARNING
y y If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
» » Using cabinets or stands
recommended by the manufacturer
of the television.
» » Only using furniture that can safely
support the television.
» » Ensuring the television is not
overhanging the edge of the
supporting furniture.
» » Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
» » Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
» » Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
ASSEMBLING AND PREPARING
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
10 cm
10 cm
CAUTION
y y Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
y y If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
y y Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y y Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
42/50PN45**
50/60PN65**
400 x 400
M6
4
PSW420BX
VESA (A x B)
Standard screw
Number of screws
Wall mount
bracket
Wall mount bracket
PSW420BX
A
B
NOTE
y y Use the screws that are listed on the
VESA standard screw specifications.
y y The wall mount kit includes an installation
manual and necessary parts.
y y The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
y y The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
y y For more information, refer to the manual
supplied with the wall mount.
ENGLISH
ENG
Mounting on a wall
19
20
ASSEMBLING AND PREPARING / MAKING CONNECTIONS
ENGLISH
ENG
Tidying cables
1 Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the Cable
Holder.
(Only 42PN45**)
Cable holder
Power cord holder
(Depending on model)
(Only 50PN45**, 50/60PN65**)
Cable holder
Power cord holder
(Depending on model)
CAUTION
y y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and
damage to the TV may occur.
NOTE
y y If you install the TV on a Wall, detach the
cable holder from stand body and attach
on protection cover or back cover to
organize the cables.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the PN45** models.
Connect various external devices to the TV and
switch input modes to select an external device.
For more information of external device’s connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other
external devices.
NOTE
y y The external device connection may differ
from the model.
y y Connect external devices to the TV
regardless of the order of the TV port.
y y If you record a TV program on a DVD
recorder or VCR, make sure to connect
the TV signal input cable to the TV
through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
y y Refer to the external equipment’s manual
for operating instructions.
y y If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
y y In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
y y In PC mode, some resolution settings
may not work properly depending on the
graphics card.
MAKING CONNECTIONS
21
HDMI Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
IN 1(PC)
Choose any HDMI input port to connect. It does
not matter which port you use.
ANTENNA/
CABLE IN
IN
ANTENNA/CABLE
(Only 50/60PN65**)
Wall Antenna
Socket
IN 2
DVD / Blu-Ray / PC /
HD Cable Box /HD STB
NOTE
y y Use a signal splitter to use more than 2
TVs.
y y If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y y If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
y y An antenna cable and converter are not
supplied.
y y Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
(*Not Provided)
HDMI
(Only HDMI IN 1(PC))
NOTE
y y It is recommended to use the TV with the
HDMI connection for the best image quality.
y y Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
y y High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
y y Supported HDMI Audio format :
Dolby Digital, PCM (Up to 192 KHz, 32 KHz
/ 44.1 KHz / 48 KHz / 88 KHz / 96 KHz /
176 KHz / 192 KHz, DTS Not supported.)
ENGLISH
ENG
Antenna Connection
22
MAKING CONNECTIONS
Component Connection
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Transmits analog video and audio signals from
an external device to the TV. Connect the external device and the TV with a component cable
as shown.
IN 1(PC)
AUDIO IN (PC)
AUDIO IN (PC)
L/MONO
AV IN 2
L/MONO
COMPONENT
IN
ENGLISH
ENG
DVI to HDMI connection
RED
RED
RED
WHITE
RED
BLUE
VIDEO
WHITE
BLUE
DVI OUT
GREEN
AUDIO OUT
(*Not
Provided)
GREEN
RED
WHITE
(*Not Provided)
(*Not
Provided)
AUDIO
DVD / Blu-Ray /
HD Cable Box / PC
DVD / Blu-Ray / HD Cable Box
NOTE
y y Depending on the graphics card, DOS
mode may not work if a HDMI to DVI Cable
is in use.
y y When using the HDMI/DVI cable, Single link
is only supported.
NOTE
y y If cables are not installed correctly, it
could cause this image to display in black
and white or with distorted colours.
23
MAKING CONNECTIONS
ENGLISH
ENG
Composite Connection
Transmits analog video and audio signals from
an external device to the TV. Connect the external device and the TV with th e composite cable
as shown.
2
1
AUDIO IN (PC)
AV IN 2
AUDIO IN (PC)
AV IN 2
L/MONO
AV IN 1
AV IN 1
COMPONENT
IN
COMPONENT
IN
L/MONO
L/MONO
L/MONO
RED
WHITE
RED
WHITE
YELLOW
YELLOW
(*Not
Provided)
(*Not
Provided)
VIDEO
L(MONO) R
AUDIO
VCR / DVD / Blu-Ray / HD Cable Box
VIDEO
L(MONO) R
AUDIO
VCR / DVD / Blu-Ray / HD Cable Box
24
MAKING CONNECTIONS
USB Connection
You may use an optional external audio
system instead of the built-in speaker.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
My media menu to use various multimedia files.
Digital optical audio connection
Transmits a digital audio signal from the TV to
an external device. Connect the external device
and the TV with the optical audio cable as
shown.
USB IN
ENGLISH
ENG
Audio Connection
USB
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
NOTE
y y Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
y y Audio with ACP (Audio Copy Protection)
function may block digital audio output.
(*Not
Provided)
REMOTE CONTROL
25
The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the TV
correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
or
CAUTION
y yDo not mix old and new batteries, as this may damage the remote control.
y yIn Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(Depending on model)
TV/
RAD
POWER Turns the TV on or off.
RATIO
INPUT
SUBTITLE
Recalls your preferred subtitle in digital mode.
TV/
RAD an AV mode.
AV MODE Selects
RATIO Resizes an image.
INPUT Changes the input source.
.,;@
abc
def
TV/RAD
Selects Radio, TV and DTV programme.
1
2
3
Number buttons Enters numbers.
ghi
jkl
mno
programme list.
Q.VIEW Returns to the previously viewed programme.
4LIST Accesses
5 6 the saved
7+
8
pqrs
tuv
9
wxyz
- Adjusts the volume level.
FAV Accesses your favourite programme list.
Q.VIEW
LIST
GUIDE Shows programme guide.
MUTE Mutes all sounds.
FAV
ꕌPꕍ Scrolls
through the saved programmes.
P
A the previous or next screen.
ꕌPAGEꕍ Moves to
G
[
0
FAV
GUIDE
MUTE
SLEEP
P
E
TELETEXT BUTTONS ( TEXT, T.OPT) These buttons
MUTE
are used for teletext.
INFO
Views the information of the current programme
SETTINGS
and screen.
MY APPS
SETTINGS Accesses the main menus.
Q. MENU Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through
menus OK
or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and return to TV viewing.
EXIT
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.
SLEEP Sets the length of time until the TV to turns off.
Control buttons (
) Controls the MY
MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
(FREEZE) Freezes the current frame while using the TV, AV,
Component, orREC
HDMI input source.
SUBTITLE
LIVE TV
Colour
INFO
(
buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue)
ENGLISH
ENG
REMOTE CONTROL
26
REMOTE CONTROL
ENGLISH
ENG
(Depending on model)
RATIO
INPUT
AV MODE
TV/
RAD
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV
P
A
G
E
GUIDE
MUTE
SETTINGS INFO
Q.MENU
OK
POWER Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
RATIO Resizes an image.
INPUT Changes the input source.
AV MODE Selects an AV mode.
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
GUIDE Displays the program event according to time
scheduler.
MUTE Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
SETTINGS Accesses the main menus.
Views the information of the current
INFO
programme and screen.
Q. MENU Accesses the quick menu.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.
EXIT Clears all on-screen displays and returns to TV
viewing.
Colour buttons These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
EXIT
BACK
TEXT
T.OPT
SUBTITLE
TELETEXT BUTTONS ( TEXT, T.OPT) These buttons are
used for teletext.
(FREEZE) Freezes the current frame while using the
TV, AV, Component, or HDMI input source.
SUBTITLE Recalls your preferred subtitle in digital mode.
Control buttons (
) Controls the MY
MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
Using the User guide
User Guide allows you to more easily access the detailed TV information.
1 Press SETTINGS to access the main
menus.
2 Press the RED button to access the
Customer Support menus.
3 Press the Navigation buttons to scroll to
User Guide and press OK.
User Guide
1
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
e.
OPTION > To set language
SETTINGS  OPTION  Language
You can select the language of the menu displayed on the screen and the digital
sound broadcasting.
 Menu Language : Selects a language for the display text.
 Audio Language [In Digital mode Only] : Select the desired language when
watching digital broadcasting containg several voice languages.
 Subtitle Language [In Digital mode Only] : Use the Subtitle function when two
or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not broadcast, the default
language subtitle will be displayed.
Advanced Function
Information
PICTURE
AUDIO
SETUP
TIME
LOCK
OPTION
Input
MY MEDIA
Customer Support
2
Zoom In
Close
SETTINGS  OPTION  Language
You can select the language of the menu displayed on the screen and the digital
sound broadcasting.
 Menu Language : Selects a language for the display text.
 Audio Language [In Digital mode Only] : Select the desired language when
watching digital broadcasting containg several voice languages.
 Subtitle Language [In Digital mode Only] : Use the Subtitle function when two
or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not broadcast, the default
language subtitle will be displayed.
Press OK() to set picture settings.
Exit
Software Update
gh
Picture Test
put.
Signal Test
2
Sound Test
Product/Service Info.
e
nu.
ome
27
ENGLISH
ENG
me.
USING THE USER GUIDE
User Guide
3
2
To use input device
To set time options
e
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
e
OPTION
To set country
Advanced Function
de.
Information
To set language
To set subtitle
1
To set other options
1
Allows to select the category you want.
2
Allows to select the item you want.
You can use ꕌ/ꕍ to move between pages.
3
Allows to browse the description of the
function you want from the index.
Close
1
Shows the description of the selected
menu.
You can use ꕌ/ꕍ to move between
pages.
2
Zooms in or out the screen.
Close
User Guide
Zoom Out
28
MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y y Make sure to turn the power off and disconnect the power cord and all other cables first.
y y When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
y y Avoid touching the screen at all times, as this may result in damage to the screen.
y y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
y y Do not use any chemicals as this may damage the product.
y y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with the
remote control.
y y Check the remote control sensor on the product and try
again.
y y Check if there is any obstacle between the product and
the remote control.
y y Check if the batteries are still working and properly
installed (
to ,
to ).
No image display and no sound
is produced.
y y Check if the product is turned on.
y y Check if the power cord is connected to a wall outlet.
y y Check if there is a problem in the wall outlet by connecting
other products.
The TV turns off suddenly.
y y Check the power control settings. The power supply may
be interrupted.
y y Check if the Sleep Timer or Off Time feature is activated
in the TIME settings.
y y If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC
(HDMI (PC)), ‘No signal’ or ‘Invalid
Format’ is displayed.
y y Turn the TV off/on using the remote control.
y y Reconnect the HDMI cable.
y y Restart the PC with the TV on.
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
42PN45**
MODELS
Dimensions
(W x H x D)
42PN4500-TA
50PN4500-TA
With stand (mm)
983.6 x 650.3 x 250.0
1168.0 x 755.4 x 292.7
Without stand (mm)
983.6 x 595.6 x 57.0
1168.0 x 698.6 x 57.0
19.6
25.4
With stand (kg)
Weight
Without stand (kg)
Power requirement
18.4
24.0
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
50PN65**
60PN65**
50PN6500-TB
50PN6500-TC
60PN6500-TB
60PN6500-TC
With stand (mm)
1168.0 x 755.4 x 292.7
1386.8 x 874.0 x 340.0
Without stand (mm)
1168.0 x 698.6 x 57.0
1386.8 x 821.7 x 57.0
26.1
37.7
MODELS
Dimensions
(W x H x D)
Weight
With stand (kg)
Without stand (kg)
Power requirement
24.7
34.5
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
Operating Temperature
Environment
condition
50PN45**
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
Analogue TV
(Depending on Country)
(Depending on Country)
Television System
DVB-T
PAL B/B, PAL B/G, PAL D/K,
PAL-I
SECAM B/G, SECAM D/K
NTSC-M
Programme Coverage
VHF, UHF
VHF, UHF, CATV
Maximum number of storable
programmes
DVB-T & Analuge TV : 1,500
External Antenna Impedance
75 Ω
ENGLISH
ENG
SPECIFICATIONS
29
30
SPECIFICATIONS
ENGLISH
ENG
HDMI/DVI-DTV supported mode
Resolution
720 x 480
Component port connecting information
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.5
44.96
45
50
59.94
60
1920 x 1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
HDMI/DVI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
60.00
1360 x 768
47.712
60.01
1280 x 1024
63.981
60.02
1920 x 1080
67.5
60.02
(Only 50PN65**, 60PN65**)
Component ports on the
TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(50 Hz / 60 Hz only)
31
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the doubleD symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
External control device setup
To obtain the external control device setup information, please visit www.lg.com
ENGLISH
ENG
ation
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAl CONTROL DEVICE SETUP
(Only Jordan)
WEEE
Disposal of your appliance
The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.
For any Suggestion, Opinion,
Complaints, Please Call
800 54 in UAE
0800 54 54 54 in South Africa
080 100 5454 in Morocco
19960 in Egypt
021 36 54 54 in Algeria
Other countries, Please contact our
local dealer or log into
http://www.lg.com
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
(Only DTV)
Download PDF