LG | 50PK760 | LG 60PK950R Owner’s Manual

OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
Separate purchase
Wall Mounting Bracket
PSW400B or PSW400BG
or DSW400BG
PSW600B or PSW600BG
(50PK7***, 50PK9***)
(60PK9***)
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG Plasma TV.
Wireless Media Box
(AN-WL100W)
Wireless LAN for
Broadband/
DLNA Adaptor
(AN-WF100)
IN 4
WIRELESS
CONTROL
OUT
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS
Accessories...................................................... A-1
Front Panel Controls........................................ A-2
Back Panel Information.................................... A-3
Stand Installation.............................................. A-4
Back Cover for Wire Arrangement................... A-5
How to Remove the Cable Management Clip..... A-5
Not Using the Desk-Type Stand ..................... A-6
Swivel Stand ................................................... A-6
Careful Installation Advice .............................. A-6
Desktop Pedestal Installation................................. A-7
Wall Mount: Horizontal Installation................... A-7
Remote Control Key Functions . ..................... A-8
EXTERNAL EQUIPMENT SETUP
Antenna Connection.............................................1
Connecting with a Component cable...................2
Connecting with an HDMI cable..........................3
Connecting with an HDMI to DVI cable...............4
Connecting with an RCA cable............................5
USB setup............................................................6
Connecting with an RF cable...............................6
Connecting with a D-sub 15 pin cable.................7
Digital Audio Out Setup........................................8
External Equipment Wireless Connection...........9
Supported Display Resolution............................10
Screen Setup for PC mode................................11
Network Setup....................................................15
ATCHING TV / PROGRAMME CONTROL
Turning on the TV..............................................25
Initializing Setup ................................................25
Programme Selection.........................................25
Volume Adjustment............................................25
Quick Menu........................................................26
On Screen Menus Selection and Adjustment....27
Auto Programme Tuning . .................................29
Manual Programme Tuning................................30
Programme Edit ................................................32
Software Update................................................35
Picture/Sound Test.............................................37
Product/Service Information...............................38
Network Test.......................................................38
Simple Manual...................................................39
Selecting the Programme List............................40
Input List.............................................................42
Input Label.........................................................43
SIMPLINK...........................................................44
AV Mode.............................................................48
Initializing(Reset to original factory settings).....49
CONTENTS
PREPARATION
NETCAST
Legal Notice.......................................................50
Netcast Menu.....................................................52
Movie Online......................................................53
Weather Info.......................................................55
Photo Album.......................................................56
TO USE THE BLUETOOTH
Bluetooth? .........................................................57
Setting the Bluetooth..........................................58
Bluetooth Headset ............................................59
Remove the Bluetooth Device...........................63
My Bluetooth Information...................................64
Receiving Photos from External Bluetooth Device....65
Listening to the Musics from External Bluetooth
Device................................................................66
TO USE A USB DEVICE
When Connecting a USB Device.......................67
DLNA..................................................................69
Movie List...........................................................74
Photo List...........................................................84
Music List...........................................................93
DivX Registration Code....................................102
Deactivation......................................................103
GAME
Game................................................................104
I
CONTENTS
PICTURE CONTROL
CONTENTS
Picture Size (Aspect Ratio) Control.................105
Picture Wizard..................................................107
Energy Saving..................................................108
Preset Picture Settings....................................109
Manual Picture Adjustment.............................. 111
Picture Improvement Technology.....................112
Expert Picture Control......................................113
Picture Reset ..................................................116
Image Sticking Minimization (ISM) Method.....117
Mode Setting....................................................118
Demo Mode......................................................119
SOUND & LANGUAGE CONTROL
Auto Volume Leveler........................................120
Clear Voice II....................................................121
Preset Sound Settings-Sound Mode...............122
Sound Setting Adjustment -User Mode...........123
Infinite Sound...................................................123
Balance............................................................124
TV Speakers On/ Off Setup.............................125
Audio Reset......................................................126
I/II....................................................................127
- Stereo/Dual Reception.................................127
- NICAM Reception.........................................128
- Speaker Sound Output Selection.................128
On-Screen Menu Language Selection............129
TIME SETTING
Clock Setup......................................................130
Auto On/ Off Time Setting................................131
Sleep Timer Setting..........................................132
PARENTAL CONTROL
Set Password & Lock System.........................133
Block Programme.............................................134
External Input Blocking....................................135
Key Lock..........................................................136
II
TELETEXT
Switch On/ Off .................................................137
SIMPLE Text....................................................137
TOP Text..........................................................138
FASTEXT.........................................................138
Special Teletext Functions...............................139
APPENDIX
Troubleshooting................................................140
Maintenance.....................................................142
Product Specifications ....................................143
IR Codes..........................................................144
External Control Device Setup.........................145
Open Source Software Notice.........................152
PREPARATION
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ ■ Image shown may differ from your TV.
LIGHT
ENERGY
AV MODE
INPUT
ENERGY
TV
1
1
7PQRS 8 TUV 9 WXYZ
Q.VIEW
LIST
MARK
FAV
CHAR/NUM
RATIO
MUTE
Q.MENU
P
A
G
E
Q.VIEW
or
FAV
CHAR/NUM
P
RATIO
P
A
G
E
DELETE
MUTE
MENU
OK
BACK
0
MARK
P
DELETE
MENU
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
0
INPUT
SAVING
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
LIST
AV MODE
TV
SAVING
PREPARATION
PLASMA TV MODELS : 50PK7***, 50/60PK9***
ACCESSORIES
Q.MENU
OK
EXIT
BACK
EXIT
FREEZE
FREEZE
Power Cord
Owner’s Manual
Batteries (AAA)
Remote Control
x2
Cable
Management Clip
Cable Holder
Protection
Cover
Nero MediaHome
4 Essentials CD
This item is not included for all models.
x4
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polishing cloth.
x4
M4x14
M4x28
(Only 50PK7***, 50PK9***)
Bolts for stand assembly
Ferrite core can be used to
reduce the electromagnetic
wave when connecting the
power plug.
Ferrite Core
The closer the location of the
(This item is not ferrite core to the power plug,
included for all the better it is.
models.)
Polishing Cloth Do not use excessive
Polishing cloth for force. This may cause
use on the screen. scratching or discolouration.
Ferrite Core
(This item is not
included for all
models.)
Ferrite core can be used to
reduce the electromagnetic wave
when connecting the LAN cable.
Place the ferrite core far from
TV and wind the LAN cable in
the ferrite core once.
Install the power
plug closely.
A-1
PREPARATION
FRONT PANEL CONTROLS
NOTE
PREPARATION
► ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
► ►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.
► ►Do not drag the TV. The floor or the product may be damaged.
■ ■ Image shown may differ from your TV.
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
Remote Control
Sensor
SPEAKER
Power/Standby Indicator
• Illuminates red in standby mode.
• The lighting is off while the TV remains on.
Touch Button
You can use the desired button function by touching.
POWER
A-2
INPUT
MENU
OK
VOLUME
PROGRAMME
BACK PANEL INFORMATION
3
4
5
6
OPTICAL
DIGITAL
AUDIO IN
(RGB/DVI)
LAN
1
/DVI IN /DVI IN
2
1
/DVI IN /DVI IN
USB IN 1
9
AV IN 1
2
VIDEO L/MONO AUDIO
R
AV IN 1
3
3
COMPONENT IN
WIRELESS
CONTROL
LAN
OPTICAL AUDIO OUT RS-232C IN
(CONTROL & SERVICE)
RGB
IN (PC)
DIGITAL
AUDIO IN
AUDIO OUT
RS-232C IN
(RGB/DVI)
(CONTROL
& SERVICE)
RGB IN (PC)
VIDEO L/MONO AUDIO R
COMPONENT IN
WIRELESS
CONTROL
/DVI ING[
2
/DVI ING[
USB IN 1
USB IN 2
12
PREPARATION
1
USB IN 2
■ ■ Image shown may differ from your TV.
2
1
VIDEO
ANTENNA
IN
AUDIO
2
h}GpuY
ANTENNA
IN
1
VIDEO
7
7
AUDIO
h}GpuY
8
1
2
9
Power Cord Socket
This TV operates on an AC power.
Caution: Never attempt to operate the TV on
DC power.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4
RGB IN Input
Connect the output from a PC.
6
11
7
Audio/Video Input (AV IN1/2)
Connect audio/video output from an external
device to these jacks.
8
LAN
Network connection for AccuWeather,
Picasa, YouTube, etc.
Also used for video, photo and music files on
a local network.
9
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
10
Component Input
Connect a component video/audio device to
these jacks.
11
Antenna Input
Connect antenna to this jack.
12
USB Input
Connect USB storage device to this jack.
WIRELESS Control
Connect the Wireless Ready Dongle to the
TV to control the external input devices connected to Wireless Media Box wirelessly.
3
5
10
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
A-3
PREPARATION
STAND INSTALLATION
(Only 50PK7***, 50PK9***)
PREPARATION
■ ■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
1
2
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Set the Stand Base on even floor.
Assemble the parts of the Stand Body
with the Stand Base of the TV.
4
Assemble the TV as shown.
5
Fix the 4 bolts securely using the holes in
the back of the TV.
Stand Body
M4x14
M4x28
Stand Base
3
Assemble the parts of the Cable
Management Clip with the Stand Body.
Cable
Management
Clip
A-4
Stand Body
BACK COVER FOR
WIRE ARRANGEMENT
1
■ ■ Image shown may differ from your TV.
Hold the Cable Management Clip with both
hands and pull it backward as shown.
PREPARATION
■ ■ Image shown may differ from your TV.
After connecting the cables as necessary,
install Cable Holder as shown and bundle the cables.
In case of the LAN cable, install as shown
to reduce the electromagnetic wave.
HOW TO REMOVE THE
CABLE MANAGEMENT
CLIP
Cable Holder
2
Connect the cables as necessary. To connect additional equipment, see the
External Equipment Setup section.
3
Install the Cable Management Clip into
the TV until clicking sound.
NOTE
► ►Do not use the Cable Management Clip to
lift the TV.
-If the TV is dropped, you may be injured or
the TV may be damaged.
A-5
PREPARATION
NOT USING THE DESKTYPE STAND
PREPARATION
■ ■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection
Cover into the TV until
clicking sound.
CAREFUL INSTALLATION
ADVICE
■ ■ You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■ ■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ ■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
SWIVEL STAND
■ ■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
1
1
Protection Cover
(Fix a Guide to the Outsides.)
2
1
2
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
3
3
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
NOTE
► ►When moving the TV undo the cords first.
► ►Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
► ►To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
A-6
■ ■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ ■ The TV is designed to be mounted horizontally.
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL
INSTALLATION
■ ■ Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10
cm all around the TV.
► ►Should Install wall mount on a solid wall perpendicular to the floor.
► ►Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
► ►The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
► ►Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
► ►LG is not liable for any accidents or damage
to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
PREPARATION
EARTHING
NOTE
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
WALL MOUNT:
HORIZONTAL INSTALLATION
■ ■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■ ■ We recommend that you purchase a wall mounting bracket which supports VESA standard.
■ ■ LG recommends that wall mounting be performed by a qualified professional installer.
Model
50PK7***
50PK9***
60PK9***
VESA Standard Quantity
(A * B) Screw
4
400 * 400 M6
4
400 * 400 M6
4
600 * 400 M8
A-7
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
In some countries, some remote control keys may not work.
PREPARATION
(POWER) Switches the TV on from standby or off to standby.
ENERGY
AV MODE
LIGHT You can turn the light of the remote control button
on or off. (Only 50/60PK9***)
INPUT
ENERGY Adjust the Energy Saving mode of the TV.(►
SAVING p.108)
TV
LIGHT
SAVING
1
ENERGY
AV MODE It helps you select and set images and sounds
when connecting AV devices.(► p.48)
2 ABCINPUT3 DEF
AV MODE
INPUT External input mode rotate in regular sequence.
(► p.42)
TV
4 GHI 5 JKL 6 MNO
SAVING
71PQRS 82TUV
ABC 9
3WXYZ
DEF
4LIST
GHI 0
5 JKL Q.VIEW
6 MNO
TV Selects TV channel.
0 to 9 number Selects a programme.
button Selects numbered items in a menu.
MARK
7PQRS 8FAVTUV 9 WXYZ
CHAR/NUM
LIST
0
RATIO
DELETE
MARK
MUTE
P
Q.VIEW
P
A
G
E
FAV
MENU
CHAR/NUM
RATIO
Q.MENU
P
DELETE
MUTE
MENU
OK
Q.MENU
P
A
G
E
LIST Displays the programme table. (► p.40)
Q.VIEW Returns to the previously viewed programme.
VOLUME UP Adjusts the volume. /DOWN
MARK Select the input to apply the Picture Wizard
settings.
Mark and un-mark programmes in the USB menu.
FAV Displays the selected favourite programme.
CHAR/NUM Shifts the Character or Number for NetCast menu.
BACK
OK
EXIT
RATIO Selects your desired Aspect Ratio of picture.
(► p.105)
DELETE Deletes the entered character when entering the
character on the screen keyboard.
FREEZE
BACK
EXIT
FREEZE
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
PAGE UP/ Move from one full set of screen information to the
DOWN next one.
A-8
FREEZE Pause the present picture at the screen. (It doesn't
work at USB Mode and Simplink.)
The TV returns to normal viewing automatically if
no signal is received or no operation is performed
for 5 minutes.
If you keep the screen in Freeze condition, the
residual image can exist.
ENERGY
AV MODE
NetCast Select the desired NetCast menu source. (► p.50)
(Weather info, Photo Album, Movie Online)
NetCast menu source can differ by country.
INPUT
TV
1
ENERGY
Q. MENU Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio Language, Sleep Timer, Skip Off/On, USB
Device).(► p.26)
LIGHT
SAVING
2
3 DEF
AV MODE ABC
INPUT
TV
4 GHI 5 JKL 6 MNO
SAVING
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/Right) adjust the system settings to your preference.
71PQRS 82TUV
ABC 9
3WXYZ
DEF
4LIST
GHI 0
5 JKL Q.VIEW
6 MNO
OK Accepts your selection or displays the current
mode.
BACK Allows the user to move return one step in an interactive application, EPG or other user interaction
function.
MARK
7PQRS 8FAVTUV 9 WXYZ
CHAR/NUM
LIST
0
RATIO
DELETE
MARK
MUTE
P
Q.VIEW
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(► p.44)
EXIT Clears all on-screen displays and returns to TV
viewing from any menu.
P
A
G
E
FAV
MENU
CHAR/NUM
RATIO
Q.MENU
P
P
A
G
E
Coloured These buttons are used for teletext (on TELETEXT
buttons models only), Programme edit.
DELETE
MUTE
MENU
BACK
OK
OK
Q.MENU
EXIT
FREEZE
BACK
EXIT
PREPARATION
MENU Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.(► p.27)
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(►
p.137)
SIMPLINK / Controls SIMPLINK or MY MEDIA menu (Photo List,
MY MEDIA Music List and Movie List).
Menu
control buttons
Installing Batteries
FREEZE
1
■ ■ Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■ ■ Install two 1.5 V AAA batteries. Do not mix old or used batteries
with new ones.
■ ■ Close cover.
■ ■ To remove the batteries, perform the installation actions in
reverse.
A-9
EXTERNAL EQUIPMENT SETUP
■■ To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
ANTENNA CONNECTION
■■ For optimum picture quality, adjust antenna direction.
■■ An antenna cable and converter are not supplied.
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA
IN
RF Coaxial Wire (75 Ω)
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
ANTENNA
IN
VHF
■■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
1
EXTERNAL EQUIPMENT SETUP
■■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50PK7*** model.
■■ Image shown may differ from your TV.
CONNECTING WITH A COMPONENT CABLE
OPTICAL
L/MONO
AUDIO
R
3
Connect the video outputs (Y, PB, PR) of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks
LANon
the TV.
2
1
/DVI IN
2
Connect the audio output of the external equipment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
4
Select the Component1 input source using the
INPUT button on the remote control.
If connected to COMPONENT IN 2, select
Component2 input source.
AV IN 1
1
VIDEO
WIRELESS
CONTROL
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
AUDIO INset-top box.
DIGITAL However, if you do
This TV can receive Digital RF/Cable signals without an external digital
AUDIO OUT
(RGB/DVI)
RS-232C IN
(CONTROL
SERVICE)
RGB IN (PC)refer to
receive Digital signals from a digital set-top box or other digital external device,
the &diagram
as
shown below.
2
1
Y
VIDEO
AUDIO
1
2
PB
PR
L
ANTENNA
IN
R
►►HDMI Audio Supported format : Dolby Digital, PCM.
DTS Audio format is not supported.
Signal
Component
HDMI
480i/576i
480p/576p
720p/1080i
O
O
O
O
X
O
O
1080p
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz / 50 Hz / 60 Hz)
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Y
PB
PR
Video output ports
on DVD player
2
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
CONNECTING WITH AN HDMI CABLE
3
Turn on the external equipment.
(Refer to the external equipment's manual for operating
instructions.)
WIRELESS
CONTROL
LAN
OPTICAL
DIGITAL
AUDIO OUT
(CON
RGB IN (PC)
VIDEO
3
2
1
/DVI IN
Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using
the INPUT button on the remote control.
1
EXTERNAL EQUIPMENT SETUP
2
Connect the HDMI output of the external equipment (digital settop box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/
DVI IN 3 or HDMI/DVI IN 4 jack on the TV.
COMPONENT IN
1
AUDIO IN
(RGB/DVI)
VIDEO
HDMI-DTV OUTPUT
NOTE
►►The TV can receive video and audio signals simultaneously when using an HDMI cable.
►►If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
►►Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI
Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
3
L/M
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
3
4
Turn on the digital set-top box or the PC and
the TV.
(Refer to the digital set-top box or the PC
manual for operating instructions.)
VIDEO
L/MONO
AUDIO
3
2
1
/DVI IN
R
2
1
VIDEO
ANTENNA
IN
AUDIO
2
1
Select HDMI1, HDMI2, HDMI3 or HDMI4 input
source using the INPUT button on the remote
control.
or
DVI-DTV OUTPUT
4
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
AV IN 1
EXTERNAL EQUIPMENT SETUP
2
LAN
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
AUDIO IN
(RGB/DVI)
COMPONENT IN
1
Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1, HDMI/DVI IN
2, HDMI/DVI IN 3 or HDMI/DVI IN 4 jack on
WIRELESS
CONTROL
the TV.
L
R
DVI-PC OUTPUT
AUDIO
CONNECTING WITH AN RCA CABLE
2
LAN
1
/DVI IN
Select AV1 input source using the INPUT button on the remote control.
If connected to AV IN2, select AV2 input
source.
R
2
1
VIDEO
ANTENNA
IN
AUDIO
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Or, Operate the corresponding external equipment.
(Refer to external equipment operating guide.)
3
VIDEO L/MONO AUDIO
3
1
ANT IN
S-VIDEO
ANT OUT
OUTPUT
SWITCH
VIDEO
L
R
or
VIDEO
L
EXTERNAL EQUIPMENT SETUP
2
WIRELESS
CONTROL
COMPONENT IN
1
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the
jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
AV IN 1
AUDIO IN
(RGB/DVI)
R
NOTE
►►If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
Camcorder
Video Game Set
5
EXTERNAL EQUIPMENT SETUP
2
After connecting the USB IN 1 or USB IN 2
jack, you use the USB function. (► p.67)
or
1
USB IN 1
Connect the USB device to the USB IN 1 or
USB IN 2 jack on the TV.
Vk}pGpuG[
EXTERNAL EQUIPMENT SETUP
1
USB IN 2
USB SETUP
CONNECTING WITH AN RF CABLE
h}GpuY
AUDIO IN
(RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
WIRELESS
CONTROL
L(MONO)
AUDIO
Connect the ANT 2OUT socket of the VCR to
LAN
the ANTENNA
IN 1socket on the TV.
/DVI IN
COMPONENT IN
1
VIDEO
3
VIDEO
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
R
AV IN 1
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
2
1
ANTENNA
IN
AUDIO
1
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
2
VIDEO
Wall Jack
Antenna
6
L
R
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
3
Turn on the PC and the TV.
4
Select RGB input source using the INPUT button on the remote control.
VIDEO
2
LAN
L(MONO)
AUDIO
3
1
/DVI IN
R
AV IN 1
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
COMPONENT IN
2
AUDIO IN
(RGB/DVI)
Connect the RGB output of the PC to the RGB
IN (PC) jack on the TV.
2
1
VIDEO
2
1
AUDIO
RGB OUTPUT
AUDIO
EXTERNAL EQUIPMENT SETUP
1
ANTENNA
IN
7
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL
DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
2
onnect the other end of the optical cable to
C
WIRELESS
the digital audio (Optical) input on the audio
CONTROL
equipment.
3
Set the “TV Speaker option - Off ” in the
LAN
AUDIO menu.(►p.125). Refer to the external
audio equipment instruction manual for operation.
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
VIDEO
CAUTION
L(MONO)
AUDIO
3
2
1
/DVI IN
R
2
1
AN
1
VIDEO
2
►►Do not look into the optical output port. Looking at the laser
beam may damage your vision.
8
AUDIO IN
(RGB/DVI)
AV IN 1
Connect one end of an optical cable to the TV
Digital Audio (Optical) Output port.
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
1
AUDIO
EXTERNAL EQUIPMENT WIRELESS CONNECTION
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold
separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the
TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to
the TV wirelessly.
1
2
EXTERNAL EQUIPMENT SETUP
After the wireless is connected, press the INPUT button to view the wireless input screen.
Refer to the Wireless Media Box manual for operating instructions.
Connect the WIRELESS CONTROL jack of the
Wireless Ready Dongle to the WIRELESS
CONTROL jack on the TV.
Connect HDMI OUT jack of the Wireless
Ready Dongle to the HDMI/DVI IN 1, HDMI/
DVI IN 2, HDMI/DVI IN 3 or HDMI/DVI IN 4
jack on the TV.
LG Wireless Ready Dongle
AV1
AV2
COM
RGB
HDMI 1
HDMI 2
HDMI 3
HDMI 4
WIRELESS
WIRELESS
CONTROL
OUT
LG Wireless Media Box
AUDIO IN
(RGB/DVI)
LAN
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
VIDEO
3
2
1
/DVI IN
COMPONENT IN
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
L(MONO)
AUDIO
R
2
1
VIDEO
AUDIO
NOTE
►WIRELESS
►
CONTROL : Wireless Ready Dongle power supply and control usage.
►HDMI
►
: Video/Audio signal is connected in Wireless Ready Dongle.
►When
►
you connect to the Wireless Media Box (Separately sold product), you can watch the
external device connected to the Wireless Media Box through wireless connection.
9
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPLAY RESOLUTION
RGB-PC, HDMI/DVI-PC mode
HDMI/DVI mode
EXTERNAL EQUIPMENT SETUP
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
720x400
31.469
70.08
Resolution
720x480
Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
31.47
59.94
31.47
60
31.25
50
37.5
50
640x480
31.469
59.94
800x600
35.156
56.25
800x600
37.879
60.31
1024x768
48.363
60.00
44.96
59.94
1280x768
47.693
59.992
45
60
1360x768
47.712
60.015
33.72
59.94
1280x1024
63.981
60.020
33.75
60
59.934
28.125
50
26.97
23.94
27
24
33.71
29.97
33.75
30.00
56.25
50
67.432
59.939
67.5
60
1920x1080
66.587
720x576
1280x720
1920x1080
NOTE
10
►►Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
►►There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
►►The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
►►We recommend using 1920x1080, 60 Hz for the
PC mode, this should provide the best picture
quality.
►►Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
►►Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
►►If using a sound card, adjust PC sound as required.
►►If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
►►If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
►►DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
►►If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
SCREEN SETUP FOR PC MODE
Screen Reset
Returns Position, Size and Phase to the factory default settings.
PICTURE
Move
• Brightness
50
• Sharpness
70
• Colour
60
SCREEN
OK
Prev.
Resolution
Auto Config.
• Tint
0
R
G
• Colour Temp. 0
W
C
• Advanced Control
• Picture Reset
Position
Size
►
Screen
•• Screen
Move
To Set
Yes
No
Phase
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
Run Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
11
EXTERNAL EQUIPMENT SETUP
Auto Configure (RGB [PC] mode only)
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
PICTURE
Move
SCREEN
OK
Prev.
Move
Resolution
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
0
R
G
• Colour Temp. 0
W
C
• Advanced Control
• Picture Reset
Auto Config.
Screen
•• Screen
Position
Size
►
EXTERNAL EQUIPMENT SETUP
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto Config.
Yes
No
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
Select Auto Config..
Select Yes.
Run Auto Config..
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
12
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
PICTURE
Move
SCREEN
OK
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
0
R
G
• Colour Temp. 0
W
C
• Advanced Control
• Picture Reset
Resolution
Auto Config.
Prev.
1024 x 768
1280 x 768
1360 x 768
Size
►
Screen
•• Screen
Position
Move
Phase
Reset
1
2
3
4
EXTERNAL EQUIPMENT SETUP
This function works in the following mode: RGB[PC]
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
13
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, Phase
EXTERNAL EQUIPMENT SETUP
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust
the picture position manually.
This function works in the following mode : RGB[PC].
PICTURE
Move
SCREEN
OK
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
0
R
G
• Colour Temp. 0
W
C
• Advanced Control
• Picture Reset
Prev.
Resolution
Auto Config.
Position
Size
►
Screen
•• Screen
Move
Phase
Reset
1
2
3
4
Select PICTURE.
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
5
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
14
NETWORK SETUP
This feature is not available in all countries.
Wired Network Connection
1
/DVI IN
COMPONENT IN
LAN
AUDIO
L(MONO)
R
AV IN 1
VIDEO
WIRELESS
CONTROL
2
1
VIDEO
ANTENNA
IN
AUDIO
Broadband Modem
Broadband Service
Router
EXTERNAL EQUIPMENT SETUP
This TV can be connected to a local area network
(LAN)OPTICAL
via the LAN port. After making the physical
AUDIO IN
DIGITAL
(RGB/DVI)
RS-232C IN
AUDIO OUT
connection, the TV needs to be set up for network
communication.
(CONTROL & SERVICE)
RGB IN (PC)
Broadband Modem
Broadband Service
1
Connect the LAN port of the Modem or Router to the LAN
port on the TV.
2
Select “Network Setting” in the NETWORK menu.
3
After connecting the LAN port, use the NetCast menu.
For more information about NETCAST setup and troubleshooting, visit http://lgknowledgebase.com. Search for
NetCast.
CAUTION
►Do
► not connect a modular phone cable to the LAN port.
►Since
►
there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service provider.
15
EXTERNAL EQUIPMENT SETUP
Wired Network Setup
NETWORK
Move
•Network
•Network Setting
Setting :: Wired
Wired
• Network Status
OK
Previous setting value exists. Do
you want to connect with the
previous setting?
Network Type
►
EXTERNAL EQUIPMENT SETUP
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
If you already set
the Network Setting
: Internet is connected
Wired network is recommended
•Legal Notice
wired
OK
wireless
Resetting
Next
Appeared when
wired and wireless
are simultaneously
connected.
IP Auto Setting
Network Setting
IP Manual Setting
Network Setting
Network Status
Select the IP setting mode.
IP Mode
Network connecting...
Setting
Test
●
IP Address
● Subnet
Mask
1
2
3
4
5
0.0.0.0
255 . 255 . 0 . 0
IP Mode
●
◄ IP Manual Setting ►
IP Address
● Subnet
Mask
0.0.0.0
255 . 255 . 0 . 0
●
Gateway
0.0.0.0
●
Gateway
0.0.0.0
●
DNS Server
0.0.0.0
●
DNS Server
0.0.0.0
OK
Close
OK
Exit
Previous
Exit
Select NETWORK.
Select Network Setting.
Select Wired.
If you already set Network Setting: Select Resetting. The new connection settings
resets the current network settings.
Select IP Auto Setting or IP Manual Setting.
When Selecting IP Manual Setting:
IP addresses will need to be input manually.
6
Insert the IP address.
◄ IP Auto Setting ►
Previous
16
Exit
Select OK.
■■ This feature requires an always-on broadband internet connection.
■■ You do not need to connect to a PC to use this function.
■■ If Network Setting is not working, check your network conditions. Check the LAN cable and
make sure your router has DHCP turned on if you wish to use the Auto Setting.
■■ If the Network Setting is not completed, network may not operate normally.
■■ IP Manual Setting: Select it if there is no DHCP server on the network and you want to set the IP
address manually.
EXTERNAL EQUIPMENT SETUP
■■ IP Auto Setting: Select it if there is a DHCP server on the local area network (LAN) via wired
connection, the TV will automatically be allocated an IP address. If you’re using a broadband
router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server
function. The IP address will automatically be determined.
17
EXTERNAL EQUIPMENT SETUP
NOTE
EXTERNAL EQUIPMENT SETUP
18
►For more information about NetCast setup and troubleshooting, visit http://lgknowledgebase.com.
Search for NetCast.
►Use a standard LAN cable with this TV. Cat5
or better with a RJ45 connector.
►Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the player to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
►Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
►LG is not responsible for any malfunction of
the TV and/or the internet connection feature
due to communication errors/malfunctions
associated with your broadband internet connection, or other connected equipment.
►LG is not responsible for problems within your
internet connection.
►Some content available through the network
connection may not be compatible with the TV.
If you have questions about such content,
please contact the producer of the content.
►You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
►Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
►Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
►A 10 Base-T or 100 Base-TX LAN port is
required for connection to this TV. If your internet
service does not allow for such a connection,
you will not be able to connect the TV.
►A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this TV or you
may be limited to the number of devices you
can connect at the same time. (If your ISP limits sub-scription to one device, this TV may not
be allowed to connect when a PC is already
connected.)
►The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
►The wireless network operates at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone, Bluetooth® devices, microwave oven,
and can be affected by interference from them.
It can be interrupted by the device using 5 GHz
radio frequencies. It is same device with LG
wireless media box, cordless telephone, other
Wi-Fi device.
►It may decrease the service speed using
Wireless network by surrounding wireless condition.
►Turn off all unused network equipment in your
local home network. Some devices may generate network traffic.
►In some instances, placing the access point or
wireless router higher up away from the floor
may improve the reception.
►The reception quality over wireless depends
on many factors such as type of the access
point, distance between the TV and access
point, and the location of the TV.
►When connecting internet through the wired/
wireless sharing machine, it may interrupt the
connection because of the use limitation and
confirmation of service company.
►To connect wireless AP, an AP that supports
the wireless connection is necessary, and the
wireless connection function of the AP needs
to be activated. Please enquire to the AP supplier for the possibility of AP wireless connections.
►Please verify the security settings of AP SSID
for wireless AP connection, and enquire to the
AP supplier for the AP SSID security settings.
►The TV can become slower or malfunction with
wrong settings of network equipments (wired/
wireless router, hub, etc). Please install correctly by referring to the manual of the equipment, and set the network.
►When AP is set to include 802.11n, and if
Encryption is designated as WEP(64/128bit) or
WPA(TKIP/AES), the connection may not be
possible.
►There may be different connection methods
according to the AP manufacturers.
Wireless Network Connection
USB IN 1
puG[
EXTERNAL EQUIPMENT SETUP
USB IN 2
The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan
network.
The network configuration and connection method may vary depending on the equipment in use and
the network environment. Refer to the setup instructions supplied with your access point or wireless
router for detailed connection steps and network settings.
h}GpuY
1
Connect the “LG Wireless LAN for Broadband/DLNA
Adaptor” to the USB IN 1 or USB IN 2 jack on the TV.
2
Select “Network Setting” in the NETWORK menu.
After connecting, you can use the NetCast menu.
NOTE
►►For enjoying pictures, music, or video stored in the PC using the router, the use of wired port in the router is
recommended.
►►When the wireless port of the router is used, there may be restrictions for some functions.
19
EXTERNAL EQUIPMENT SETUP
Wireless Network Setup
Move
•Network
•Network Setting
Setting :: Wired
Wired
• Network Status
If you already set the
Network Setting
OK
Network Type
: Internet is connected
Wired network is recommended
•Legal Notice
Wired
Select the wireless network setting type
Setting from the AP list
Simple setting (WPS-button mode)
OK
Wireless
Setting Ad-hoc network
Resetting
Next
Exit
Next
Previous
Exit
Appeared when wired and wireless
are simultaneously connected.
If your AP is locked
Network Setting
●
IP Address
Mask
◄ IP Auto Setting ►
255 . 255 . 0 . 0
●
DNS Server
255 . 255 . 0 . 0
3
4
5
@./
1
abc
2
def
3
ghi
4
jkl
5
mno
6
pqrs
7
tuv
8
wxyz 9
aA1
^
#+-
Cancel
<
IPTIME
iptime
ASW
Network1
0
OK
OK
2
◄ ►
255 . 255 . 0 . 0
Gateway
1
Page 1/1
Insert 1~32 ASCII characters.
255 . 255 . 0 . 0
●
Previous
Select AP you want to connect.
Insert the SSID of AP.
^
IP Mode
Selecting AP
Inserting SSID
Select the IP setting mode.
● Subnet
20
Select the wireless network setting type.
Previous setting value exists. Do
you want to connect with the
previous setting?
►
EXTERNAL EQUIPMENT SETUP
NETWORK
Access Point
Search
Connecting with PIN mode
Next
Exit
Exit
Prev.
Select NETWORK.
Select Network Setting.
Select Wireless.
If you already set Network Setting:
Select Resetting.
The new connection settings resets
the current network settings.
Select Setting from the AP list.
Previous
Exit
6
Scan the all available AP (Access
Point) or wireless routers within range
and display them as a list.
7
Select an AP (Access Point) or
wireless router on the list.
(If your AP is locked, insert the
security key of AP).
8
9
Input the security key of AP.
Repeat step 4-5 on P.16.
When a security code is already set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecting AP
Connecting with PIN mode
Select AP you want to connect.
Insert PIN number at the AP webpage and
press ‘Connect’ button.
IPTIME
PIN NUMBER : 12345670
iptime
ASW
Network1
Connect
Access Point
Search
For more information, check the AP manual.
Next
Connecting with PIN mode
Next
Previous
1
2
4
5
Exit
Exit
Repeat step 1-6 on P.20.
RED
3
Previous
Connect the access point with PIN
mode.
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
■■ PIN number is the unique 8 digit number
of the dongle.
EXTERNAL EQUIPMENT SETUP
Page 1/1
Select Connect.
Repeat step 4-5 on P.16.
21
EXTERNAL EQUIPMENT SETUP
Simple setting (WPS-button mode)
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
EXTERNAL EQUIPMENT SETUP
Select the wireless network setting type.
Select the wireless network setting type.
Press WPS mode button of AP and press ‘Connect’ button.
Setting from the AP list
Connect
Simple setting(WPS-button mode)
Caution: Check if WPS mode button is available for your AP.
Setting Ad-hoc network
Next
Next
Previous
1
2
3
4
22
Simple setting (WPS-button mode)
Exit
Previous
Repeat step 1-4 on P.20.
Select Simple setting (WPS-button mode).
Select Connect.
Repeat step 4-5 on P.16.
Exit
Ad-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two PCs with a cross cable.
Select the wireless network setting type.
Setting Ad-hoc network
Setting Ad-hoc network
Select the wireless network setting type.
Features using exiting network can be unavailable. Do you
Setting from the AP list
Network ID(SSID) : LGTV10
want to change network connection?
Security Key : 1111111111
OK
Setting Ad-hoc network
Cancel
Changing the setting information.
Next
Next
Previous
Exit
Connect
Exit
Previous
Signal Strength
TV
Gateway
Setting
●
Mac Address: 00:00:13:64:23:01
IP Address : 10.19.152.115
Subnet Mask: 255.255.254.0
Gateway
: 10.19.152.1
Test
Insert the setting information into the device.
Insert the IP address.
Ad-hoc network is connected.
(LGTV10)
TV
TV
TV
IP Mode
IP Manual Setting
IP Address
192 . 168 . 0 . 10
● Subnet
Mask
Gateway
192 . 168 . 0 . 1
●
DNS Server
255 . 255 . 0 . 0
Cancel
● Example of the PC setting that
Exit
● PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
● TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select OK.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
1
2
3
4
Security Key : 1111111111
Connecting the Ad-hoc network
OK
Previous
Network ID(SSID) : LGTV10
255 . 255 . 255 . 0
●
Close
Exit
Setting Ad-hoc network
Network Setting
Network Status
Next
EXTERNAL EQUIPMENT SETUP
Simple setting (WPS-button mode)
Previous
Insert the setting information into the device.
supports a wireless network
1. Find a wireless network device
in your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
Repeat step 1-3 on P.20.
Select Setting Ad-hoc network.
Select OK.
5
6
Insert the IP address.
Network setting is
completed.
Select Close.
Select Connect to connect Ad-hoc network.
You can see the Network ID and Security Key on your
TV screen.
Enter this Network ID and Security Key to your device.
If a network may not operate, change the setting
information using the RED button.
23
EXTERNAL EQUIPMENT SETUP
Network Status
Network Status
NETWORK
Move
OK
: Not connected
: Internet
is connected
►
•• Network
Network Status
Status
Network connecting
►
EXTERNAL EQUIPMENT SETUP
•Network Setting : Wired
•Legal Notice
Setting
Test
Close
Select the wireless network setting type.
Network Setting
Select the wireless network setting type.
Select the IP setting mode.
IP Mode
●
◄ IP Auto Setting ►
IP Address
● Subnet
Mask
0.0.0.0
255 . 255 . 0 . 0
●
Gateway
0.0.0.0
●
DNS Server
0.0.0.0
Setting Ad-hoc network
Next
Previous
Exit
Wireless Connection
OK
Previous
Setting from the AP list
Simple setting (WPS-button mode)
Exit
Wired Connection
1
2
3
24
Select NETWORK.
Select Network Status.
Check the Network Status.
■■ Setting: Return to the network setting
menu or wireless network setting type
menu.
■■ Test: Test the current network status
after setting the network.
■■ Close: Return to the previous menu.
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
button on the TV or press
the POWER, INPUT, P
or NUMBER button on the remote control and the TV will
switch on.
INITIALIZING SETUP
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust
the Language, Mode Setting or Auto Tuning.
Note:
a.If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b.Press the BACK button to change the current OSD to the previous OSD.
c."Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
d."Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data,
“Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
e.The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the
OPTION menu.
EXTERNAL EQUIPMENT SETUP
1
PROGRAMME SELECTION
1
Press the P
or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
+ or - button to adjust the volume.
1
Press the
2
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV Mode button.
25
WATCHING TV / PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
WATCHING TV / PROGRAMME CONTROL
Aspect Ratio: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to
Q.Menu.
Clear Voice II : By differentiating the human
sound range from others, it helps users listen to human voices better.
Picture Mode : Selects your desired Picture
Mode.
Sound Mode : It is a feature to automatically set the sound combination which it deems
the best for the images being watched.
Selects your desired Sound Mode.
◄
Aspect Ratio
Audio : Selects the sound output.
Sleep Timer : Sets the sleep timer.
Skip Off/On : Selects the Skip Off/On.
USB Device : Selects “Eject” in order to eject
USB device.
►
16:9
Exit
1
2
3
26
Display each menu.
Select your desired Source.
• Press the Q.MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
2
Select a menu item.
3
Move to the pop up menu.
SETUP
● Auto
SETUP
Move
PICTURE
OK
Tuning
● Manual
PICTURE
Tuning
● Programme
Edit
● Aspect
Ratio
● Picture
Wizard
●
● Auto
AUDIO
Move
Volume
● Clear
Voice II
: Off
● Balance
● Sound
Mode
Mode
: Standard
• Contrast
• Brightness
50
• Sharpness
70
• Colour
70
TIME
OK
: Off
: 16:9
Energy Saving : Off
● Picture
AUDIO
Move
Move
100
OK
WATCHING TV / PROGRAMME CONTROL
• Press the RED button, you can check the
Customer Support menu.
• Press the GREEN button, you can check
the Simple Manual menu.
• Press the MENU/EXIT button to return to
normal TV viewing.
• Press the BACK button to move to the
previous menu screen.
Display each menu.
OK
● Clock
TIME
3
0
: Standard
L
R
● Off
Time
: Off
● On
Time
: Off
● Sleep
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Timer
: Off
27
WATCHING TV / PROGRAMME CONTROL
LOCK
● Set
LOCK
Move
Password
● Lock
System
● Key
OPTION
OK
Lock
Move
OK
● Language(Language)
: Off
● ISM
OPTION
Method
● Block
Programme
● Factory
● Input
Block
● Set
: Off
ID
● Mode
● IR
: Normal
Reset
:1
Setting
Blaster : Home Use
: Off
WATCHING TV / PROGRAMME CONTROL
● For further information, refer to the
optional “Wireless Media Box”
manual for operating instructions.
NETWORK
Move
•Network Setting : Wired
NETWORK
• Network Status
Exit
Bluetooth
OK
: Internet is connected
Bluetooth on
BLUETOOTH
Move
OK
Bluetooth is off.
Select 'Bluetooth On' on the left to turn on Bluetooth.
•Legal Notice
My Info
GAME
MY MEDIA
GAME
MY MEDIA
Movie List
Photo List
JUMP
HOLE IN ONE
Music List
SAVING CRYSTAL INVADER
Press OK(
) to view the list of photos in the USB or PC.
URGENT SURVIVAL
Exit
Option
28
WHACK A MOLE SUDOKU COOKING BURGER
Exit
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 200. But the number may differ slightly
depending on broadcasting signals.
Move
● Manual
SETUP
OK
►
● Auto
Auto Tuning
Tuning
●
Tuning
● Programme
Edit
MoveAntennaOK
● Auto Tuning
● Manual
Antenna
Tuning
● Programme
Edit
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Start
Close
1
2
3
4
Select SETUP.
Select Auto Tuning.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
• If you wish to keep on auto tuning select
Start using the
button. Then, press
the OK button. Otherwise select Close.
WATCHING TV / PROGRAMME CONTROL
SETUP
Select Start.
Run Auto tuning.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
29
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
SETUP
OK
Tuning
● Auto
● Programme
Move
OK
Tuning
TV
● Manual Tuning
►
● Manual Tuning
►
WATCHING TV / PROGRAMME CONTROL
● Auto
Move
Edit
● Programme
Edit
● Storage
1
● System
BG
● Band
V/UHF
● Channel
0
● Fine
◄►
● Search
◄►
● Name
C 01
Store
Close
1
2
3
4
5
Select SETUP.
Select Manual Tuning.
or
Make appropriate
adjustments.
Select TV system.
6
7
8
Select V/UHF or Cable.
or
Select the desired
channel number.
Commence searching.
Select Store.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•U
se NUMBER buttons to input a 4-digit password in Lock System ‘On’.
• BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa)
I : PAL I (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : NTSC-M (USA / Korea / Philippines)
• To store another channel, repeat steps 3 to 8.
30
SETUP
Move
SETUP
OK
Tuning
● Auto
● Programme
Move
OK
Tuning
TV
● Manual Tuning
►
● Manual Tuning
►
● Auto
Edit
● Programme
Edit
● Storage
1
● System
BG
● Band
V/UHF
● Channel
0
● Fine
◄►
● Search
◄►
C 01
Store
Close
■■Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
3
Select SETUP.
4
Select Manual Tuning.
Select Name.
Select the position and
make your choice of the
second character, and
so on.
You can use an the
alphabet A to Z, the
number 0 to 9, +/ -, and
blank.
5
Select Close.
6
Select Store.
WATCHING TV / PROGRAMME CONTROL
● Name
■■Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1
2
3
4
Select SETUP.
Select Manual Tuning.
5
Fine tune for the best picture
and sound.
Select Store.
Select Fine.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
31
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
during TV viewing.
button
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
SETUP
● Auto
Move
Page 1/10
A
OK
Tuning
● Manual
Favourite Group :
TV
Tuning
Programme
Edit
●●Manual
Tuning
Programme
Edit
►
WATCHING TV / PROGRAMME CONTROL
Programme Edit
0 -----
1 ARD
2 BBC1
3 ARD
4 C 01
5 S 46
6 C 05
7 C 06
8 C 10
9 S 11
10 C 52
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 ----▼
Pr. Change
Delete
1
2
3
4
FAV
Favourite Pr.
Move
Q.MENU
Favourite Pr. Group
Previous
Block/Unblock
Skip
Select SETUP.
Select Programme Edit.
Enter the Programme Edit.
Select a programme to be stored or
skipped.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
32
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■■Deleting a programme
1
RED
Turn the programme number to red.
•T
he selected programme is deleted, all the
following programmes are shifted up one
■■Moving a programme
1
2
GREEN
Select a programme number to be moved.
3
GREEN Release.
Turn the programme number to
green.
■■Locking a programme number
1
Select a programme number to be locked.
2
WATCHING TV / PROGRAMME CONTROL
2
Select a programme number to be deleted.
• It can be registered as Lock
programme even when Lock
System is turned Off.
YELLOW Lock up the programme.
3
YELLOW Release.
■■Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
• When programmes are to be skipped, the
skipped programme shows in blue and
these programmes will not be selected by
the P
buttons during TV viewing.
• If you wish to select a skipped programme,
directly enter the programme number with
the NUMBER buttons or select it in the
programme edit.
33
WATCHING TV / PROGRAMME CONTROL
■■Selecting favourite programme
Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
1
2
WATCHING TV / PROGRAMME CONTROL
34
3
Select your desired programme.
Add corresponding programme to Favourite
list of current Favourite group.
Release.
■■Selecting favourite programme group
1
2
3
Select your desired programme.
Display a pop-up window where
Favourite group can be changed.
Select a Favourite group.
SOFTWARE UPDATE
You can update the TV with the latest software to enhance the product operation and/or add new features.
You can update the software by connecting the TV directly to the software update server.
The Software Update function may not work properly depending on your internet environment. In this case, you
can obtain the latest software from the authorized LG Electronics Service Center then update your TV.
Software Update
SETUP
PICTURE
AUDIO
TIME
LOCK
◄ On ►
Picture Test
● Current version
Sound Test
00.00.01
Product/Service Info.
Network Test
OPTION
NETWORK
Press OK(
BLUETOOTH
2
Simple Manual
Close
Close
Exit
RED Select Customer Support.
•U
se the Check Update Version to update the
latest software on the Network server manually.
Select Software Update.
Select On or Off.
• If you select On, a user confirm message box will
be displayed to notify that new software is found.
3
4
GAME
) to set programme settings.
Customer Support
1
MY MEDIA
Check Update Version
WATCHING TV / PROGRAMME CONTROL
Software Update
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
■■When setting “Software Update”
When new Software is available
when connected to Internet, the
following message will be displayed.
? New software version is ready. Do you
want to update it?
WATCHING TV / PROGRAMME CONTROL
36
Download starts when "Yes" is
selected. At this time, progressing pop-up window does
display.
Download progress status can
be checked from Software
Update menu.
TV is restarted when download is completed.
Update is completed.
Rebooting now.
Starting Update
Remind me later
Software Update
◄ On ►
Software downloading progress.
Ver. 00.00.01 ► Ver.00.00.02
4%
Check Update Version
Close
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• After Software Update, you can confirm the updated software version in Software Update menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
<Network Update>
• You cannot open NetCast while the software is being updated.
• Do not release the Network connection during Update.
PICTURE/SOUND TEST
This function is a customer support function that can execute picture and sound tests.
PICTURE
AUDIO
TIME
LOCK
Picture Test
Sound Test
?
Do you have a problem in this test
screen?
Product/Service Info.
Network Test
OPTION
NETWORK
Press OK(
BLUETOOTH
2
3
GAME
Yes
No
Close
) to set programme settings.
Customer Support
1
MY MEDIA
Simple Manual
Exit
RED Select Customer Support.
Select Picture Test or Sound Test.
WATCHING TV / PROGRAMME CONTROL
Software Update
SETUP
Select Yes or No.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
PRODUCT/SERVICE INFORMATION
This function is a customer support function that can see product/service information and customer service center
information.
Software Update
Picture Test
PICTURE
SETUP
AUDIO
TIME
LOCK
Sound Test
Product/Service Info.
Network Test
WATCHING TV / PROGRAMME CONTROL
NETWORK
OPTION
Press OK(
BLUETOOTH
MY MEDIA
) to set programme settings.
Customer Support
1
Close
GAME
Simple Manual
Exit
RED Select Customer Support.
2
Select Product/Service Info..
3
Display Model/Type, Software version, Serial Number,
Used time, Customer service center and Homepage.
• Press the MENU/EXIT button to
return to normal TV viewing.
• Press the BACK button to move
to the previous menu screen.
NETWORK TEST
Check the network status.
Software Update
Network Status
Picture Test
Sound Test
SETUP
PICTURE
AUDIO
TIME
LOCK
Product/Service Info.
Network connecting...
Network Test
Test
Network
Close
OPTION
NETWORK
Press OK(
BLUETOOTH
2
3
38
GAME
Setting
Test
) to set programme settings.
Customer Support
1
MY MEDIA
Simple Manual
Exit
RED Select Customer Support.
Select Network Test.
Check the network status.
• Press the MENU/EXIT button to
return to normal TV viewing.
• Press the BACK button to move
to the previous menu screen.
Close
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
■■ Image shown may differ from your TV.
OPTION
PICTURE
AUDIO
TIME
LOCK
NETWORK
BLUETOOTH
MY MEDIA
GAME
Press OK(
) to set programme settings.
Customer Support
1
2
Simple Manual
Exit
•U
se the RED button to go to the Index
page.
GREEN Select Simple Manual.
Select the part of the manual you want to see.
•U
se the BLUE button to play the Simple
Manual automatically or manually.
WATCHING TV / PROGRAMME CONTROL
SETUP
• Press the EXIT button to return to normal TV viewing.
39
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Mini Glossary
WATCHING TV / PROGRAMME CONTROL
8:
1 BBC
8:
8:
2 BBC
8:
8:
3 BBC
8:
8:
4 BBC
8:
5 BBC
Exit
►
Displayed when the
Locked Programme.
Programme List
A
Pr.Edit
■■Displaying programme LIST
1
Display the Programme List.
•Y
ou may find some blue programmes.
These have been set up to be skipped by
auto programming or in the programme
edit mode.
•S
ome programmes with the channel number shown in the programme LIST indicate
there is no station name assigned.
BLUE
■■Selecting a programme in the programme list
1
2
40
Select a programme.
Switch to the chosen programme number.
Turn the programme edit.
■■Paging through a programme list
1
Turn the pages.
2
Return to normal TV viewing.
WATCHING TV / PROGRAMME CONTROL
■■ Displaying the favourite programme list
Exit
Favourite List
◄ ►Favourite Pr. Group
Group
1 BBC
TV
2 BBC
TV
3 BBC
Pr.Reg.
1
►
►
TV
B
►
◄
Pr.Edit
BLUE
Turn the programme edit.
YELLOW
Current channel is registered/
cancelled as preferred channel on
currently selected Group.
Display the Favourite Programme List.
Favourite group is changed.
41
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
HDMI can be recognized by a detect pin and thus enabled only when an external device approves
voltage.
By using TV button, you can move from External Input to RF Input and to the last watched programme
in TV mode.
WATCHING TV / PROGRAMME CONTROL
42
■■ Image shown may differ from your TV.
Input List
Move
Antenna
USB1
USB2
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Input Label
1
OK
Select the input source.
Exit
•A
ntenna : Select it when watching the
TV.
• USB : Select it when using USB depends
on connector.
• AV : Select it when watching the VCR or
external equipment.
•C
omponent : Select it when using the
DVD or the Digital set-top box depends on
connector.
•R
GB :Select it when using PC depends on
connector.
•H
DMI : Select it when using DVD, PC or
Digital set-top box depend on connector.
INPUT LABEL
Selects a label for each input source.
■■ Image shown may differ from your TV.
Input Label
Move
OK
Antenna
USB1
USB2
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Input Label
Exit
AV1
◄
►
AV2
◄
►
Component1 ◄
►
Component2 ◄
►
RGB
►
◄
▼
Close
1
2
3
BLUE Select Input Label.
Select the source.
WATCHING TV / PROGRAMME CONTROL
Input List
Select the label.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable
without additional cables and settings.
WATCHING TV / PROGRAMME CONTROL
If you do not want SIMPLINK menu, select “Off”.
In wireless external output, SIMPLINK function is not supported.
OK
◄
On
Exit
►
Watch TV
DISC
VCR
VCR Recorder
HDD
◄ Speaker
TV Speaker
1
2
3
►
Display the SIMPLINK.
Select On or Off.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
44
Connecting to Home Theater with the SIMPLINK logo.
WIRELESS
CONTROL
LAN
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
VIDEO
3
2
1
/DVI IN /DVI IN
►► When you select or operate a media device with
home theater function, the speaker automatically
switches to home theater speaker (HT speaker).
OPTICAL
DIGITAL
AUDIO OUT
1
L/MONO
AUDIO
R
2
1
VIDEO
AUDIO
2
Home Theater
WATCHING TV / PROGRAMME CONTROL
Select Home Theater in the Speaker menu by
pushing the SIMPLINK button.
AUDIO IN
(RGB/DVI)
AV IN 1
2
Connect the HDMI/DVI IN 1, HDMI/DVI IN 2,
HDMI/DVI IN 3 or HDMI/DVI IN 4 terminal on
the back of the TV and the HDMI output terminal
of the Home Theater using HDMI cables.
COMPONENT IN
1
ANTENNA
IN
NOTE
►►Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK
device with the HDMI cable.
►►When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK.
45
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
WATCHING TV / PROGRAMME CONTROL
46
Disc playback
Control connected AV devices by pressing the
, OK, ►, ▀, l l, ◄◄ and ►► buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK,
does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used.
(*CEC: Consumer Electronics Control).
SIMPLINK Menu
Press the
1
2
4
5
TV viewing : Switch to the previous TV programme regardless of the current mode.
DISC playback : Select and play connected
discs.
When multiple discs are available, the device
type of discs are conveniently displayed at
the bottom of the screen.
VCR playback : Play and control the connected VCR.
DD Recordings playback : Play and conH
trol recordings stored in HDD.
udio Out to Home theater/Audio Out to
A
TV: Select Home theater or TV speaker for
Audio Out.
• Home theater: Only one supported at a time
• DVD, Recorder: Up to four supported at a time.
• VCR: Only one supported at a time
OK
◄
On
Exit
►
1
Watch TV
Selected Device
2
DISC
3
VCR
When a device is connected (displayed in
bright colour)
4
VCR Recorder
HDD
5
◄ Speaker
TV Speaker
►
When device is not connected (displayed in
gray)
WATCHING TV / PROGRAMME CONTROL
3
button and then OK button to select the desired SIMPLINK source.
47
WATCHING TV / PROGRAMME CONTROL
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
WATCHING TV / PROGRAMME CONTROL
Off
Game
1
Cinema
Sport
Press the AV MODE button repeatedly to select the desired source.
2
Cinema in AV mode,
Cinema will be selected both
for Picture Mode and Sound Mode in PICTURE menu and AUDIO
menu respectively.
• If you select “Off” in AV mode, the picture and image which you initially
set will be selected.
• If you select
NOTE
►►
48
Cinema : Operate to Cinema at the Movie, Photo which used an USB device.
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
But the settings of
Day and
Night of the Picture Mode cannot be initialized.
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
When the Lock System menu is "On", the message to enter the password appears.
Move
● ISM
● ISM
: Normal
►
Method
ID
● Mode
● IR
3
4
Setting
Blaster ►
● Set
2
Move
● Language(Language)
● Factory Reset
1
OPTION
OK
● Language(Language)
Method
● Factory Reset
:1
● Set
: Home Use
● Mode
: Off
● IR
Select OPTION.
ID
Setting
Blaster OK
All user
settings and channel settings will
: Normal
be reset. Still Continue?
:1
Yes
: Home Use
No
: Off
WATCHING TV / PROGRAMME CONTROL
OPTION
• In Lock System "On", if you forget your
password, press '0', '3', '2', '5' on the
remote control handset.
Select Factory Reset.
Select Yes.
Start Factory Reset.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
49
NETCAST
This feature is not available in all countries.
LEGAL NOTICE
Legal Notice
Page 1/3
NETWORK
Move
OK
• Network Status
: Internet is connected
•Legal Notice
Notice
•Legal
►
•Network Setting : Wired
NETCAST
IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services
accessible through this device belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such content and services are provided
solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without
limiting the foregoing, unless expressly authorized by the applicable content owner or service
provider, you may not copy, upload, post, transmit, translate, sell, modify, create
derivative works, or distribute in any manner or medium any content or services displayed
through this device.YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND
ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER
EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE
▼
Close
1
2
3
Select NETWORK.
Select Legal Notice.
Check Legal notice.
• Press the MENU/EXIT button to return to normal TV viewing.
50
IMPORTANT NOTICE RELATING TO NETWORK SERVICES
SERVICE
NETCAST
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not copy, upload, post, transmit, translate, sell, modify, create derivative works, or distribute in any
manner or medium any content or services displayed through this device.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND ALL THIRD PARTY
CONTENT AND SERVICES ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER EXPRESS OR,
IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
OF THIRD PARTY RIGHTS. LG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE OR
SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR
SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL LG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR ANY
OTHER DAMAGES ARISING OUT OF, ANY INFORMATION CONTAINED IN, OR ANY CONTENT
OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be changed, suspended, removed, terminated or interrupted, or access
may be disabled at any time, without notice, and LG makes no representation or warranty that any
content or service will remain available for any period of time. Content and services are transmitted
by third parties by means of networks and transmission facilities over which LG has no control. LG
may impose limits on the use of or access to certain services or content, in any case and without
notice or liability. LG expressly disclaims any responsibility or liability for any change, interruption,
disabling, removal of or suspension of any content or service made available through this device.
LG is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the
respective content and service providers.
51
NETCAST
This feature is not available in all countries.
NETCAST MENU
These services are provided by separate Content Provider.
Content can be changed or deleted depending on Content Provider.
All content furnished by the service provider are subject to change at any time including, but not limited
to the removal of content. Should you have any inquiry or problem related to the content, you may refer
to the service provider’s website for the most up-to-date information. Please note that LGE is not responsible for any content provided by the service provider or any changes concerning such content.
Please visit the content providers web site for specific information on their services. (But, some content
manual maybe not provide depending on Content Provider).
NetCast menu source can differ by country.
NETCAST
Weather
info
1
2
Movie
Online
Photo
Album
Select NETCAST menu option.
Enjoy the Weather info, Movie Online or Photo Album.
NOTE
►The videos list searched from the TV may different with the list searched from a web browser on PC.
►The settings of this TV do not affect the Movie Online’s playback quality.
►The playback videos may be paused, stopped or buffering occurring often depending on your broadband
speed.
We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a connection
speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on your ISP’s network
conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you
want to increase your connection speed. Many ISPs offer a variety of broadband speed options.
►►To view the owner’s manual that provided by the Content Provider, visit our website at http://www.lg.com.
►►For service that requires log in, join the applicable service on the website using the PC and log in through the TV to
enjoy various additional functionalities.
►►When you set the city you want with Setup by pressing the red button, the background of NetCast will be set to the
weather of the selected city.
►►If there is no user action 2 minutes following freezing image or video on screen, the screensaver will activate itself
preventing fixed image remaining on screen.
52
• Press the RED button to select Weather of area.
• Press the EXIT button to return to normal TV viewing.
MOVIE ONLINE
Movie Online is a video sharing website where users can upload, view, and share video clips.
Movie Online Screen Components
1
Movie Online menu
Videos list
1
2
RED
NETCAST
2
Set the option menu.
Return to NetCast menu.
Return to TV viewing.
NOTE
►►When you press the Q.Menu button while the Movie Online video is playing in full mode, you can set the
video options.
53
NETCAST
Movie Online Service menu
NETCAST
● Home: You can watch the popular video in real time.
● Featured: The featured videos list will be displayed.
● Popular: The best rated videos list from Movie Online server will be displayed.
● Most Viewed: The most viewed videos list will be displayed.
● Search: The keypad/keyboard menu will be displayed.
● History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
● Favorites: In sign-in status, this menu will be displayed the videos list that is arranged in the Movie
Online server with your account (Some videos may not appear on the Favorites list, even if the videos are arranged in the server).
● Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
Using the remote control
■
Stops the video and displays related videos list.
II
Pause the video while it is playing.
►
Play the selected video.
Skip the playback forward or backward.
RED
Set the option menu.
Return to NetCast menu.
Return to TV viewing.
54
WEATHER INFO
Weather info is the programme to view the weather of the city the user wants.
Weather info Screen Components
1
2
1
2
NETCAST
3
Weather info menu
Weather list by city
Corresponding buttons on the
remote control
3
RED
Change between Celsius and Fahrenheit.
Move the focus to the menu you want.
Select the focused menu.
Return to NetCast menu.
Return to TV viewing.
Weather info Service menu
● Home: The weather of selected city is displayed.
● Favorite City: Frequently checked cities can be registered to check the weather.
NOTE
►By
► default, New York, London and Paris are registered and the user can add/delete cities from
Favorite City.
►LG
► is not responsible for the accuracy of the weather forecast.
►Applicable
►
weather information can differ from the actual weather depending on the information
provided by Weather info.
55
NETCAST
PHOTO ALBUM
Photo Album is an application that appreciates digital image files.
Photo Album Screen Components
1
NETCAST
2
3
Photo Album menu
Photos list
Corresponding buttons on the
remote control
1
2
3
Select the desired photo.
The selected photo file is displayed.
Return to NetCast menu.
Return to TV viewing.
Photo Album Service menu
● Home: The featured photos list will be displayed.
● Friends: You can register users with the pictures you want as friends. You can add up to 10 friends.
● Search: The keypad/keyboard menu will be displayed.
● My Photos: You can view the pictures uploaded to the Web. This function can only be used when
you sign in.
● Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
56
TO USE THE BLUETOOTH
BLUETOOTH?
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types
of information devices such as computers, cell phones and PDAs, as well as digital appliances
through wireless connection, without having to connect any cable, to enable data exchange.
With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset
or receive images(only JPEG), listen to music from the Bluetooth enabled cell phone using this TV.
Precautions when using the Bluetooth
►►Use within 7 m (-45° to 45°) range.
►►If you use the device out of the range or within the range with obstacles, it can result in communication
error.
►►Communication error can occur depending on the surrounding devices.
►►Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth.
►►The device search time differs depending on the number of Bluetooth devices and the operating situation.
►►The probability of search increases with less number of devices.
►►Electromagnetic wave can be interfered with applicable wireless devices.
►►Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot
provide services related to human life.
►►You can only connect one Bluetooth device at a time.
►►You cannot receive photos(only JPEG) or listen to music from other Bluetooth devices while using the
Bluetooth headset.
►►For details of Bluetooth, refer to the user manual of the Bluetooth device.
►►Operation is subject to the following two conditions : (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
►►Bluetooth can be used about 30 seconds after the power is turned on.
TO USE A BLUETOOTH
• Communication Spec.: Bluetooth Specification Version 2.0 + EDR (Enhanced Data Rate)
• Output: Bluetooth Specification Power Class 2
• Maximum Communication Range: Line of open sight approx. 10 m (30 ft)
• Frequency Band: 2.4 GHz band (2.4 GHz to 2.4835 GHz)
• Bluetooth Module: RBFS-B921A (LG Electronics)
• Compatible Bluetooth Profile : GAVDP(Generic Audio/Video Distribution Profile)
A2DP(Advanced Audio Distribution Profile)
HSP(Headset Profile)
OPP(Object Push Profile)
BIP(Basic Imaging Profile)
FTP(File Transfer Profile)
QDID(Qualified Design Identity) : B015199
57
TO USE A BLUETOOTH
SETTING THE BLUETOOTH
If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images
from an external device and view them on the TV, listen to music from cell phone(Bluetooth device),
you can use the wireless communication without having to connect any cables.
You can use the BLUETOOTH menu by selecting “Bluetooth on”.
If you do not want to use the Bluetooth function, select “Bluetooth off”.
If it is connected to the external Bluetooth device, you can select “Bluetooth off” after disconnecting
the device.
TO USE A BLUETOOTH
Exit
Bluetooth
SETUP
PICTURE
AUDIO
TIME
LOCK
Bluetooth on
Move
OK
Bluetooth is off.
Select 'Bluetooth On' on the left to turn on Bluetooth.
OPTION
NETWORK
Press OK(
BLUETOOTH
2
GAME
) to set bluetooth settings.
Customer Support
1
MY MEDIA
Simple Manual
Exit
Select BLUETOOTH.
Select Bluetooth on.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
58
BLUETOOTH HEADSET
When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset
through wireless communication.
You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device.
A maximum of 12 devices can be paired.
When the unit is searching for the Bluetooth headset, other buttons except for the “Stop” (OK button)
do not work.
Connecting a new Bluetooth headset
Bluetooth off
Searching Bluetooth headset
Exit
Bluetooth
Move
OK
1/1
50PK760R-TA
No Bluetooth device.
New
Search headset
My Info
1
2
3
4
5
Stop searching
TO USE A BLUETOOTH
You can only search for the new Bluetooth headset only in the Disconnected condition.
When you run the search, it will show you the list of all Bluetooth headsets responding.
After new Bluetooth device is searched, the PIN number is validated to connect the device. For
details, refer to the user manual of the applicable device.
Select BLUETOOTH.
Select Search headset.
Select the desired Bluetooth
headset.
Select the desired Bluetooth headset
PIN number. Refer to the user manual
of the applicable device for the PIN
number.
Connect the Bluetooth headset.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
59
TO USE A BLUETOOTH
Connecting to Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed
at the top.
When connecting to the Bluetooth device already registered, you can select and connect directly
without any PIN validation.
Exit
Bluetooth
Move
1/1
Bluetooth off
Exit
Bluetooth
OK
Move
OK
Bluetooth off
Bluetooth headset is connected.
DR-BT140Q
PLT 510
sgh-e760
No device
Search headset
Disconnect
TO USE A BLUETOOTH
Remove device
1
2
3
My Info
PLT 510
00:19:7f:ff:4a:1a
My Info
Select BLUETOOTH.
Select the desired Bluetooth headset.
Connect the Bluetooth headset.
• After connecting/using the Bluetooth headset, the headset setting will be the Disconnected condition automatically when you turn off the power of the TV and then turn on.
• After connecting the Bluetooth headset, the TV speaker is switched to Mute condition and the
sound will only be generated from the headset.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
60
Disconnecting the Bluetooth headset during use
Exit
Bluetooth
Move
OK
Bluetooth off
Exit
Bluetooth
Move
Bluetooth off
Bluetooth headset is connected.
Disconnect
Disconnect
3
4
PLT 510
00:19:7f:ff:4a:1a
Disconnect
Cancel
My Info
Select BLUETOOTH.
Select Disconnect.
Select Disconnect.
TO USE A BLUETOOTH
2
Do you want to disconnect headset?
PLT 510
00:19:7f:ff:4a:1a
My Info
1
OK
Disconnect the Bluetooth headset.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
61
TO USE A BLUETOOTH
When requesting to connect to TV from the Bluetooth headset
When the Bluetooth menu is "On" and there is a connection request
from the headset, this message is dispalyed.
Not all headsets support the this feature.(Refer to the user manual of
the applicable Bluetooth headset.)
Some headset types may make an attempt at connection when they
are turned off/on even though they are not included in the
Registered Device list.
1
TO USE A BLUETOOTH
62
Do you want to use your headset?
Yes
No
Select Yes or No.
NOTE
►►LG recommends the following headset models.
-Plantronics VOYAGER-855 / SONY HBHDS970, HBH-DS980 / Motorola S605 /
Logitech Freepulse-wireless
There might be an audio delay, depending on
the buffer memory size of the headset.
►The
►
stereo/mono headset officially certified
to be Bluetooth compatible can be searched
and connected.
►The
►
stereo/mono headset that supports the
A2DP or HSP function among the Bluetooth
devices can be connected.
►If
► the surrounding environment of the TV is
as follows, the device may not be searched
or connected properly.
-If there is strong electromagnetic wave.
-If there are many Bluetooth devices.
-If the headset is turned off, not in place or
has an error.
-Because products such as microwave oven,
wireless LAN, plasma light, gas range etc.,
use the same frequency range, it can cause
communication error.
►Only
►
one Bluetooth headset can be connected at once.
►Connection
►
that is lost due to the TV being
turned off etc. will not be automatically recovered. Try connecting the applicable device
again.
►Some
►
operations can be slower while operating the headset.
►Even
►
if you choose simplink Home Theater
after using the headset during Simplink operation, the unit will not automatically switch to
Home Theater speakers.
►When
►
the headset connection continuously
fails, pair the device one more time.
►The
►
audio quality of mono headsets will not be
as good as that for stereo headsets.
►Mono
►
headsets may suffer from noise as the
distance from the TV increases, because they
use a different transmission method compared
with stereo headsets.
►►When a Bluetooth headset is in use, the
Volume +/- and Mute keys do not work, and
the Audio menu returns to the default value
and is disabled.
►With
►
Bluetooth set to On, if any registered
devices are turned on, the TV will switch to
Bluetooth mode automatically even though you
are watching in another input mode. In this
case, set Bluetooth to Off.
REMOVE THE BLUETOOTH DEVICE
When 12 devices are registered, you cannot register any more devices, and the external device will no
longer be able to pair up with the TV. In this case, you should delete one (disconnect first if a device is
connected to the TV) and then you can register another device.
"Remove device" will be available when selecting the device that is not connected to the TV.
Exit
Bluetooth
Move
Bluetooth off
DR-BT140Q
PLT 510
sgh-e760
No device
Search headset
Search headset
1
4
OK
Do you want to delete the selected Bluetooth
device?
PLT 510
00:19:7f:ff:4a:1a
Delete
Cancel
My Info
My Info
TO USE A BLUETOOTH
Remove device
3
Move
1/1
Bluetooth off
2
Exit
Bluetooth
OK
Select BLUETOOTH.
RED Select Remove device.
Select Delete.
Remove the Bluetooth device.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
63
TO USE A BLUETOOTH
MY BLUETOOTH INFORMATION
This function provides the My Bluetooth Information to the user.
"Edit" will be available when TV is not connected with any device.
You can edit the Setup TV PIN or Setup TV name.
You can check the TV address.
To accept connection from an external Bluetooth device or to connect to an external Bluetooth device,
the PIN needs to be entered.
For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the
applicable device.
TO USE A BLUETOOTH
The TV PIN is composed of numbers of up to 16 digits.
The TV PIN must have more than 1 digit.
Exit
Bluetooth
Move
Bluetooth
OK
1/1
Bluetooth off
Bluetooth off
Exit
Move
My Info
1/1
Setup TV PIN.
0000
Setup TV name.
DR-BT140Q
PLT 510
sgh-e760
DR-BT140Q
No device
Search headset
Search headset
Remove device
1
TV address
GLOBAL-PLAT2
PLT 510
sgh-e760
Close
Remove device
My Info
Select BLUETOOTH.
OK
No device
00:05:c9:51:06:f3
My Info
• Press the DELETE button to delete digits
one by one.
2
BLUE Select My Info.
3
Select Setup TV PIN or Setup TV name.
4
5
You can use an the alphabet A to Z,
the number 0 to 9, +/ -, and blank.
Save.
• Press the EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
64
RECEIVING PHOTOS FROM EXTERNAL BLUETOOTH
DEVICE
For details on how to send photos(only JPEG) from the external Bluetooth device to TV, refer to the
user manual of the applicable device.
Receiving picture(s)
Cancel
F
◄
Rotate
1/2
G
Hide
►
Exit
Select the desired photos.
(Rotate) : Rotate photos.
■■ Rotates the photo 90° clockwise upon OK button on
(Rotate).
TO USE A BLUETOOTH
< > button, the OSD will disappear.
• When you select Hide with the
And when you press the OK button again, it will appear again.
• The maximum accumulated size of the image(s) that can be received is 10MBytes.
• You cannot receive the image(s) while using the Bluetooth headset.
• You cannot receive the image(s) while listening to music from Bluetooth device.
• When the external Bluetooth device is currently sending the photo, press the RETURN button to
stop receiving the photo. All photos already received will be deleted as a result.
• With some Bluetooth devices, you may not be able to transmit an image (JPEG) file to the TV set.
65
TO USE A BLUETOOTH
LISTENING TO THE MUSICS FROM EXTERNAL
BLUETOOTH DEVICE
For details on how to listen to the musics from the external Bluetooth device to TV, refer to the user
manual of the applicable device.
You should use the Bluetooth device supporting A2DP(as external device).
•W
ith some Bluetooth devices, you may not be able to listen to music via the TV speaker system.
• With some Bluetooth device, the sound can be slow or discontinued from time to time.
Listening to bluetooth music...
Press any key to finish.
TO USE A BLUETOOTH
66
• Press the
+ or - button to adjust the volume.
• If you wish to switch the sound off, press the MUTE button.
• Press the RETURN button to return to normal TV viewing.
NOTE
►►You cannot listen to music while using the Bluetooth headset.
►►You cannot listen to music while receiving image(s).
TO USE A USB OR PC DEVICE
WHEN CONNECTING A USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected.
When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu.
In USB device, you can not add a new folder or delete the existing folder.
After choosing the desired type of media, choose a device to open files from. The options are: USB
device or DLNA.
1 Connect the USB device to the USB IN 1
USB IN 2
or USB IN 2 jack on the TV.
USB IN 1
or
Vk}pGpuG[
When removing the USB device
Select the USB Device menu before removing
the USB device.
1
Select Movie List, Photo List or
Music List.
2
h}GpuY
MY MEDIA
Movie List
Press OK(
Photo List
4BLUE
Select Eject.
Music List
NOTE
) to view the list of photos in the USB or PC.
Option
3
Select USB Device.
Exit
Select the desired device.
■■ Image shown may differ from your TV.
►In
► order to avoid losing the USB memory stick,
use the USB connector(sold separately) to fix
the USB memory stick to the USB connector
holder of the TV.
TO USE A USB OR PC DEVICE
2
• Only photo(JPEG), music (MP3) and movie(DAT,
MPG, MPEG, VOB, AVI, DIVX, MP4, MKV, TS,
TRP, TP, ASF, WMV) are supported.
USB connector holder
Search other network device.
Please select the device.
USB Label
USB
Input Port
USB Label
DLNA
USB Connector (sold separately)
- Fix the one end of the USB connector to
the USB memory stick and the other end
to the USB connector holder.
Device Selection
Search
Previous
• Press the BACK button to move to the previous
menu screen.
67
TO USE A USB OR PC DEVICE
Precautions when using the USB device
TO USE A USB DEVICE
OR PC DEVICE
68
►►Only a USB storage device is recognizable.
►►If the USB storage device is connected through a USB hub, the device is not recognizable.
►►A USB storage device using an automatic recognition programme may not be recognized.
►►A USB storage device which uses its own driver may not be recognized.
►►The recognition speed of a USB storage device may depend on each device.
►►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
►►Please do not connect the USB storage device which was artificially maneuvered on the PC. The
device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files.
►►Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different utility
programme which is not supported by Windows, it may not be recognized.
►►Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If
not, the device may not be recognized.
►►Please connect a USB storage device with the cable offered by the device maker.
►►Some USB storage devices may not be supported or operated smoothly.
►►File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.
►►Be sure to back up important files since data stored in a USB memory device may be damaged. We
will not be responsible for any data loss.
►►If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
►►If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use
up to 4 partitions or USB memory devices.
►►If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
►►If the USB memory device does not work properly, disconnect and reconnect it.
►►How fast a USB memory device is detected differs from device to device.
►►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is
turned on.
►►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB
memory.
►►Any device with more than the recommended capacity may not work properly.
►►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on
again to make it work properly.
►►USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
►►Maximum of 999 folders or files can be recognized under one folder.
►►The file arrangement of the USB storage device is similar to that of Windows XP and supports up to
100 alphabetical characters.
►►If there are a lot of folders or files all within one folder, the device may not be able to access these properly.
DLNA
About DLNA
This TV can display and play many types of movie, photo and music files from your DLNA server and
has been certified by DLNA for photos.
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics,
computing industry and mobile device companies. Digital Living provides consumers with easy sharing
of digital media through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA
server software or other DLNA compatible device is connected to this TV, some setting changes of
software or other devices may be required. Please refer to the operating instructions for the software
or device for more information.
Please refer to pages 70 ~ 103 for additional information on supported file types and other instructions.
NOTE
TO USE A USB OR PC DEVICE
►The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for
sharing files and folders to this TV.
►The supplied Nero MediaHome 4 Essentials software does not support following functions:
Transcoding, Remote UI, TV control, Internet services and Apple iTunes
►This manual explains operations with the English version of Nero MediaHome 4 Essentials as
examples. Follow the explanation referring to the actual operations of your language version.
►If there are too many folders and files in one folder, it may not operate properly.
►For the DLNA option, use the Nero MediaHome program that is provided with the TV. However,
we cannot guarantee that third party programmes will work perfectly.
►You can select a channel while viewing the small preview channel list on your TV screen.
►Check your network settings when the DLNA option does not work properly.
►To use the DLNA option, at least one or more network interfaces should be checked.
►And the number of network interfaces installed may differ depending on the PC being used. (This
example illustrates a PC with 2 network interfaces installed, and only one of them is checked for
using DLNA.)
►Do not check the option for a virtual network interface if a virtual PC (e.g. Vmware) is installed in
your PC. It may result in the DLNA option not working properly.
►If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may
not work properly. In this case, exit Nero Media Home and restart the programme. You can download the latest version of Nero Media Home by clicking the question mark at the bottom-left of the
programme.
►When the network is unstable, the device may be slower or may need to load during playback.
►When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported.
►When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the
original.
►When more than one TV is connected to a single server in DLNA mode, a file may not play properly, depending on the server performance.
►If the play time information is not provided by the server, it is displayed as "--:--:--."
►When using Movie List, DRM files in the DLNA server cannot be played.
69
TO USE A USB OR PC DEVICE
Installing Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.
TO USE A USB OR PC DEVICE
70
Requirement PC system before you install Nero MediaHome 4 Essentials
■■ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required),
Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
■■ Windows Vista® 64-bit edition (application runs in 32-bit mode)
■■ Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone
■■ 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
■■ Memory: 256 MB RAM
■■ Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and
16-bit color settings
■■ Windows® Internet Explorer® 6.0 or higher
■■ DirectX® 9.0c revision 30 (August 2006) or higher
■■ Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11 b/g/n) (IEEE 802.11 n: Except for
Russia)
1
Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
An installation wizard will walk you through the quick and uncomplicated installation process.
2
Close all Microsoft Windows programmes and exit any anti-virus software that may be running.
3
Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
4
Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard
appears.
5
Click the Next button to display the serial number input screen.
Click Next to go to the next step.
6
If you accept all conditions, click I accept the License Conditions check box and click Next.
Installation is not possible without this agreement.
7
Click Typical and click Next. The installation process is started.
8
If you want to take part in the anonymous collection of data, select the check box and click the Next
button.
9
Click the Exit button to complete the installation.
Sharing files and folders
After installing Nero MediaHome, you must add folders you wish to share.
Double-click the Nero MediaHome 4 Essentials icon on the desktop.
2
Click Network icon on the left and define your network name in the Network name field. The
Network name you enter will be recognized by your TV.
3
Click Shares icon on the left.
4
Click Local Folders tab on the Shared screen.
5
Click Add icon to open the Browse Folder window.
6
Select the folder containing the files you want to share. The selected folder is added to the list of
shared folders.
7
Click Start Server icon to start the server.
NOTE
►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders
tab and click Rescan Folder at the More button.
►Visit www.nero.com for more information and software tools.
TO USE A USB OR PC DEVICE
1
71
TO USE A USB OR PC DEVICE
Playing back shared contents
You can display and play movie, photo and music content stored on your computer or other DLNA
media servers.
1
2
3
TO USE A USB OR PC DEVICE
72
4
Start the server on your computer or other device that connected on your home network.
Select MY MEDIA.
Select Movie List, Photo List or Music List.
Select the DLNA.
Depending on the media server, this TV may need to get the permission from
the server.
If you want to re-scan available media server, press blue colour button.
NOTE
TO USE A USB OR PC DEVICE
►To play the file on the media server, the TV and the media server must be connected to the same
network.
►Because the compatibility and available playback functions on the MY MEDIA menu are tested
on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and
playback functions on the MY MEDIA may differ depending on media servers.
►The file requirements on this page are not always compatible. There may have some restrictions
by file features and media server’s ability.
►►Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.
►Movie thumbnail is not supported in DLNA Movie.
►If there is an unplayable music file in the MY MEDIA menu, the TV will skip the file and play next
file.
►The file information indicated on the screen may not always correct for music and movie files in
MY MEDIA menu.
►This TV only supports movie subtitle files supplied by Nero MediaHome 4.
►The subtitle file name and movie file name have to be the same and located at the same folder.
►If subtitle files have been added after a directory has been indexed already, the user has to
remove and re-add the folder to the list of shares.
►The playback and operating quality of the MY MEDIA function may be affected by your home network condition.
►The files from removable media such as USB drive, DVD-drive etc. on your media server may not
share properly.
►When
►
playing the Media through DLNA connection, it does not support the DivX file play which is
protected by DRM.
►►Up to 200 folders in one folder and 999 including folders and files can be recognized.
►►If there are a lot of folders or files all within one folder, the device may not be able to access these
properly.
73
TO USE A USB OR PC DEVICE
MOVIE LIST
You can play movie files on a USB or PC storage device.
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
TO USE A USB OR PC DEVICE
74
Movie(*.mpg/*.mpeg/*.dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.dvix/*.avi/*.asf/*.wmv/*.avi(motion-jpeg)/*.mp4(motionjpeg)/*.mkv(motion-jpeg))supporting file
Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivX)
Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)
• Some user-created subtitles may not work properly.
• Some special characters are not supported in subtitles.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• Changing font and colour in subtitles is not supported.
• Subtitles in languages other than one specified are not supported.
• Video files with subtitle files of 1 MB or larger may not be played properly.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is
changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame.
• Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly depending on
the frame.
• Movie files other than the specified types and formats may not work properly.
• Max bitrate of playable movie file is 20 Mbps.
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
• DTS Audio codec is not supported.
• A movie file more than 30 GB in file size is not supported for playback.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly.
• The movie file encoded by the GMC (Global Motion Compensation) and Qpel (Quarterpel Motion Estimation) is not
supported.
• When you are watching the movie by Movie List function, you can adjust an image by Energy Saving and AV Mode
key on the remote control. User setup for each image mode does not operate.
• Trick Mode does not support other functions than ►► if video files do not have index information.
• When playing video file using network, the Trick mode is limited to 2-times speed.
• Video file names that contain special characters may not be playable.
Supported DivX file
File Extensions
.asf
.wmv
A/V
Video
Audio
Codec
Profile/Level Support
VC-1 Advanced Profile
Advanced Profile@Level 3
(e.g. 720p60, 1080i60, 1080p30)
Only streams compliant
to SMPTE 421M VC-1
VC-1 Simple and Main Simple Profile@Medium Level (e.g. CIF, QVGA)
standard
are supported.
Profiles
Main Profile@High Level (e.g. 1080p30)
WMA Standard
WMA 9 Professional
DivX3.11
DivX4
DivX5
DivX6
.divx
.avi
Video
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
Dolby Digital
Audio
AAC
AAC-LC and HE-AAC
Video
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Most of the MKV
content available is
encoded by the open
source x264 codec.
Audio
AAC
Dolby Digital
Video
H.264 / AVC
MPEG-4 Part 2
H.264 / AVC
MPEG-2
Video
VC-1
Audio
Video
.vob
.mpg
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Global motion compensation or quarterpel motion estimation does not
supported. Streams
using this syntax are
not supported.
Global motion
compensation or
quarterpel motion
estimation does
not supported.
Streams using this
syntax are not supported.
.mkv
.ts
.trp
.tp
Advanced Simple Profile
(e.g. 720p/1080i)
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
Advanced Simple Profile (e.g.
720p/1080i)
AAC-LC and HE-AAC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
TO USE A USB OR PC DEVICE
.mp4
.m4v
XViD
H.264 / AVC
Audio
Explanation
Main Profile@High Level(e.g. 720p60, 1080i60)
Simple Profile@Medium Level
Only streams com(e.g. CIF, QVGA)
Main Profile@High Level
pliant to SMPTE
(e.g. 1080p30)
421M VC-1 standAdvanced Profile@Level3
ard are supported.
(e.g. 720p60, 1080i60, 1080p30)
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
Dolby Digital
AAC-LC and HE-AAC
AAC
MPEG-1
MPEG-2
Main Profile@High Level (e.g. 720p60, 1080i60)
Audio
Dolby Digital
MPEG-1Layer I, II
DVD-LPCM
Video
MPEG-1
Audio
MPEG-1Layer I, II
Main Profile@High Level
(e.g. 720p60, 1080i60)
Only streams compliant
configured properly for
TS, PS or ES
75
TO USE A USB OR PC DEVICE
Screen Components
You can also adjust USB in the INPUT menu.
1
Select MY MEDIA.
2
Select Movie List.
2
1
1
2
3
4
5
TO USE A USB OR PC DEVICE
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/ total pages of
contents under the folder
focused on 1
Drive1
USB1 External
001
002
005
006
Page 1/1
003
5
004
4
Move
Change Device
To Photo List
Change Numbers
Play
P
Page Change
Mark Mode
MARK
Mark
Exit
3
•S
ome files may be displayed
the preview image by icon
only.
76
Page 1/1
Movie List
•N
on-supported files are
diplayed the preview image
by icon only.
• Abnormal files are displayed
in the form of bitmap.
Movie Selection
■■When playing movie files
Page 1/1
Movie List
Drive1
USB1 External
001
005
Page 1/1
002
003
006
051. Apple_ ......
02:30:25
Move
Change Device
Select the target folder or drive.
2
Change Numbers
Play
P
Page Change
Mark Mode
• Use the P
movie page.
MARK
Mark
Exit
button to navigation in the
Select the desired movie title.
3
Movie files are played.
Using the remote control
RED
TO USE A USB OR PC DEVICE
1
To Photo List
004
Change device.
GREEN
Repeatedly, press the GREEN button to converted to Photo List->Music List.
YELLOW
A method to view in 5 Large thumbnail or simple list.
BLUE
Convert to Mark Mode.
Return to normal TV viewing.
EXIT
►
Press the PLAY(►) button to return to normal playback.
77
TO USE A USB OR PC DEVICE
■■When selected movie files are played
Page 1/1
Movie List
Mark Mode
Drive1
USB1 External
Page 1/1
001
002
003
005
006
051. Apple_ ......
02:30:25
004
Move
Change Device
TO USE A USB OR PC DEVICE
1
Page Change
Mark Mode
MARK
Mark
Exit
• When one or more movie files are
marked, the marked movies will
be played in sequence.
Select the desired movie title.
BLUE or
4
5
Change Numbers
P
Select the target folder or drive.
2
3
To Photo List
Mark
Convert to Mark Mode.
Mark desired Movie file.
RED
Marked movie file is played.
NOTE
►►In the case of files not supported, a message regarding non-supported file is displayed.
78
Using the remote control
RED
Play the selected movie file.
Once a movie file finishes playing, the next selected one will be played automatically.
GREEN
Mark all movie files on the screen.
YELLOW
Deselect all marked movie files.
BLUE
Exit the Mark Mode.
EXIT
Return to normal TV viewing.
►If
► you select “Yes” from OSD when playing the same file after the movie file has been stopped, it
will restart where it stopped previously.
►If
► continuous series files exist within the folder, the next file will automatically be played.
But, this excludes cases when the Repeat function of Movie List Option is turned “On” (Refer to
p. 82) or when set as Marked Play.
TO USE A USB OR PC DEVICE
NOTE
79
TO USE A USB OR PC DEVICE
Using the Movie List function, play
Choose options.
Set Video Play.
Set Video.
Set Audio.
■
TO USE A USB OR PC DEVICE
1
2
Close
◄►
►
II
►
or
01:02:30 / 02:30:25
◄◄ ►►
Q.MENU
Option
Hide
Exit
Show the Option menu.
Select Set Video Play., Set Video. or Set
Audio..
NOTE
►►Option values changed in Movie List does not affect Photo List and Music List.
►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
►►When replaying the video file after stopping, you can play from where it stopped previously.
80
Using the remote control
■
►
Stop the playing movie file.
Press the PLAY(►) button to return to normal playback.
During playback, press the Pause(II) button.
■■ Still screen is displayed.
■■ If no buttons are pressed on the remote control for 10 minutes after pausing, the
TV returns to the playback state.
■■ Press the Pause(II) button and then use the FF(►►) button for slow motion.
II
◄◄ / ►►
When playing,
repeatedly, press the REW(◄◄) button to speed up ◄◄(x2) -> ◄◄◄(x4) ->
◄◄◄◄(x8) ->◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32) .
repeatedly, press the FF(►►) button to speed up ►►(x2)-> ►►►(x4) ->
►►►►(x8) ->►►►►►(x16) -> ►►►►►►(x32).
■■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
or
BACK
Q.MENU
Show the Option menu.
Hide the menu on the full-sized screen.
■■ To see the menu again on the full-sized screen, press OK button to display.
EXIT
Return to normal TV viewing.
<>
■■ When using the < or > button during playback a cursor indicating the position can
be viewed on the screen.
Press the ENERGY SAVING button repeatedly to change the brightness of your
screen.(Refer to p. 108)
TO USE A USB OR PC DEVICE
MENU
Press the AV MODE button repeatedly to select the desired source.(Refer to p. 48)
81
TO USE A USB OR PC DEVICE
■■When you select the Set Video Play,
Set Video Play.
Picture Size
◄
Full
►
Audio Language
◄
1
►
Subtitle Language
◄
On
►
● Language
◄
English
►
● Code page
◄
Default
►
● Sync
◄
0
►
● Position
◄
0
►
● Size
◄
Normal
►
Repeat
◄
On
►
Previous
1
TO USE A USB OR PC DEVICE
2
Select Picture Size, Audio Language,
Subtitle Language or Repeat.
Make appropriate adjustments.
Subtitle Language
Support Language
Latin1
English, French, Spanish, Portuguese, Malaysia,
Indonesia
Cyrillic
Russian
Thai
Thai
Hebrew
Hebrew
Arabic
Arab, Parsi, Krudish
►Picture
►
Size : Selects your desired picture
format during movie play.
►Audio
►
Language : Changes the Language
Group of the audio during movie play.
Files with a single audio track cannot be
selected.
►Subtitle
►
Language: Turn on/off the external subtitle.
►Language
►
: Activated for SMI subtitle and
can select the language within the subtitle.
►Code
►
page : Can select the font for subtitle. When set to default, same font as general menu will be used.
►Sync
►
: Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs by
steps of 0.5 secs during movie play.
►Position
►
: Changes the position of the
subtitle either up or down during movie
play.
►Size
►
: Selects your desired Subtitle size
during movie play.
►Repeat
►
: Turn on/off repeat function of
movie playback. When turned on, the file
within the folder will be played back
repeatedly. Even when the repeated playback is turned off, it can run the playback if
the file name is similar to the previous file.
NOTE
82
►►Only 10,000 of sync blocks can be supported within the subtitle file.
►►When playing a video, you can adjust the Picture Size by pressing the RATIO button.
■■When you select the Set Video,
■■ Image shown may differ from your TV.
Set Video.
Picture Mode
Standard
◄
►
● Contrast
100
◄
● Brightness
50
◄
►
● Sharpness
65
◄
►
● Colour
60
◄
►
● Tint
0
R
G
● Colour Temp.
0
W
C
● Noise Reduction
Low
◄
Picture Reset
►
Previous
Select Picture Mode.
2
Make appropriate adjustments. (Refer to p. 109 to 116)
■■When you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
0
◄
L
TO USE A USB OR PC DEVICE
1
R ►
Previous
1
2
Select Sound Mode, Auto
Volume, Clear Voice II or
Balance.
Make appropriate adjustments. (Refer
to p. 120 to 124)
83
TO USE A USB OR PC DEVICE
PHOTO LIST
You can view photo files on USB or PC storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
• You can play JPEG files only.
• Non-supported files are displayed in the form of predefined icon.
• An error message occurs for corrupted files or file formats that cannot be
played.
• Corrupted image files may not be displayed properly.
• It may take some time to view high-resolution images in full screen.
TO USE A USB OR PC DEVICE
Screen Components
You can also adjust USB in the INPUT menu.
1
Select MY MEDIA.
2
Select Photo List.
2
1
1
2
3
4
5
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 1
Current page/ total pages of
contents under the folder
focused on 1
Page 1/1
Photo List
Drive1
USB1 External
P01
P10
P02
P11
Page 1/1
P03
P04
P05
P06
P12
P13
P14
P15
Move
Change Device
To Music List
Change Numbers
3
84
P07
P08
5
P09
4
View
P
Mark Mode
Page Change
MARK
Exit
Mark
Photo Selection
■■When playing photo files
Page 1/1
Photo List
Drive1
USB1 External
P01
P10
P02
P11
Page 1/1
P03
P04
P05
P06
P12
P13
P14
P15
Move
Change Device
Change Numbers
Select the target folder or drive.
2
View
P
Page Change
Mark Mode
• Use the P
photo page.
P09
MARK
Mark
Exit
button to navigation in the
Select the desired photos.
3
Photo files are displayed.
Using the remote control
RED
Change device.
GREEN
Repeatedly, press the GREEN button to converted to Music List->Movie List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
EXIT
TO USE A USB OR PC DEVICE
1
To Music List
P08
P07
Return to normal TV viewing.
85
TO USE A USB OR PC DEVICE
■■When selected photo files are displayed
Page 1/1
Photo List
Mark Mode
Drive1
USB1 External
P01
P02
P10
P11
Page 1/1
P03
P04
P05
P06
P12
P13
P14
P15
Move
View Marked
1
P
Page Change
Exit Mark Mode
TO USE A USB OR PC DEVICE
Select the desired photos.
BLUE or
4
5
Unmark All
Mark
Select the target folder or drive.
2
3
Mark All
P08
P07
Convert to Mark Mode.
Mark desired photo file.
RED
Marked photo file is displayed.
Using the remote control
RED
GREEN
Mark all photo files on the screen.
YELLOW
Deselect all marked photo files.
BLUE
Exit the Mark Mode.
EXIT
86
Display the selected photo file.
Return to normal TV viewing.
P09
MARK
Mark
Exit
• When one or more photos are marked, you
can view each marked photo or a slide show
of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in
the folder.
How to view photo
Detailed operations are available on full-sized photo view screen.
Page 1/1
Photo List
Drive1
USB1 External
P01
P02
P10
P11
Page 1/1
P03
P04
P05
P06
P12
P13
P14
P15
Move
Change Device
To Music List
P08
P07
View
P
Page Change
Mark Mode
Change Numbers
P09
MARK
Mark
Exit
◄
►
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
Press the EXIT button to move to the previous
menu screen.
◄
Slideshow
1
2
3
►
BGM
■
2/13
►
Q.MENU
Option
Select the target folder or drive.
Hide
Exit
• Use the P
photo page.
TO USE A USB OR PC DEVICE
01_a.jpg
2008/12/10
1920 x 1080
479 KB
button to navigation in the
Select the desired photos.
The selected photo is displayed in full
size.
• Press the EXIT button to go back to Photo List.
• Press the BACK button to make Help OSD disappear.
87
TO USE A USB OR PC DEVICE
01_a.jpg
2008/12/10
1920 x 1080
479 KB
4
◄
Slideshow
►
BGM
■
2/13
• Use
►
Q.MENU
Option
Hide
Exit
TO USE A USB OR PC DEVICE
►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are
selected, those photos are displayed in a slide show.
■ Set the time interval of the slide show in Option.
►►BGM (Background Music) : Listen to music while viewing photos
in full size.
■ Set the BGM device and album in Options before using
this function.
■ You can adjust Option by Q.MENU or MENU button on
the remote control.
►► � (Rotate) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
■ It can not be rotate when the width of a picture is bigger
than supported height.
►► /
: You can view the photo in Full or Original mode.
►►
: Press the ENERGY SAVING button repeatedly to
increase the brightness of your screen.(Refer to p. 108)
►►Option : Set values for Slide Speed and BGM.
■ Use
button and OK button to set values. Press
OK to save the settings.
■ You cannot change BGM while BGM is playing.
■ You can only select the MP3 folder saved on the device
that currently displays the photo.
►►Hide : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press
OK button to display.
Press the EXIT button to go back to Photo List.
88
BGM, � (Rotate),
/ ,
,
Option, Hide or
Exit.
►
◄
Select the
Slideshow,
button to select the previous
or next photo.
• Use
button to select and control
the menu on the full-sized screen.
Using the Photo List function
01_a.jpg
2008/12/10
1920 x 1080
479 KB
Choose options.
◄
►
Set Photo View.
Set Video.
Set Audio.
Close
◄
Slideshow
2
or
BGM
■
2/13
►
Q.MENU
Option
Hide
Exit
Show the Option menu.
Select Set Photo View., Set Video. or Set
Audio..
NOTE
►►Option values changed in Movie List does not affect Photo List and Music List.
►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
TO USE A USB OR PC DEVICE
1
►
89
TO USE A USB OR PC DEVICE
■■When you select the Set Photo View,
Set Photo View.
Slide Speed
◄
BGM
Fast
►
Drive1
● Repeat
◄
On
►
● Random
◄
Off
►
Previous
1
2
TO USE A USB OR PC DEVICE
90
Select Slide Speed or BGM.
Make appropriate adjustments.
■■When you select the Set Video,
■■ Image shown may differ from your TV.
Set Video.
Picture Mode
◄
● Brightness
50
◄
►
● Sharpness
50
◄
►
● Colour
50
◄
►
● Tint
0
R
G
W30
W
C
● Noise Reduction
Picture Reset
◄
Low
►
Previous
Select Picture Mode.
Make appropriate adjustments. (Refer to p. 109 to 116)
TO USE A USB OR PC DEVICE
2
►
100
● Colour Temp.
1
Photo
◄
● Contrast
91
TO USE A USB OR PC DEVICE
■■When you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
0
◄
L
R ►
Previous
TO USE A USB OR PC DEVICE
92
1
2
Select Sound Mode, Auto Volume, Clear Voice II or
Balance.
Make appropriate adjustments. (Refer to p. 120 to 124)
MUSIC LIST
You can play music files on USB or PC storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32 to 320
• Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz
• Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz
You can also adjust USB in the INPUT menu.
1
Select MY MEDIA.
2
Select Music List.
3
2
1
2
3
4
5
6
Preview: If any album jacket
for the file(Album Art Image)
exists, this jacket is displayed.
Moves to upper level folder
Current page/Total pages
Corresponding buttons on the
remote control
Contents under the folder
focused on 2
Current page/ total pages of
contents under the folder
focused on 2
Page 1/1
Music List
USB1 External
1
Drive1
001. - B01.mp3
00:00
002. - B02.mp3
00:00
Page 1/1
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
5
Move
Change Device
6
TO USE A USB OR PC DEVICE
Screen Components
To Movie List
Change Numbers
Mark Mode
Play
P
Q.MENU
Page Change
Option
MARK
Mark
Exit
4
93
TO USE A USB OR PC DEVICE
Music Selection
Page 1/1
Music List
Drive1
USB1 External
001. - B01.mp3
00:00
Page 1/1
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Change Device
To Movie List
Change Numbers
■■When playing music files
TO USE A USB OR PC DEVICE
1
Mark Mode
P
Q.MENU
Page Change
MARK
Option
Mark
Exit
• Use the P
button to navigate up/down in
the music page.
Select the target folder or drive.
2
Select the desired music title.
3
Music files are played.
Using the remote control
RED
Change device.
GREEN
Repeatedly, press the GREEN button to converted to Movie List->Photo List.
YELLOW
A method to view in 5 large thumbnail or simple list.
BLUE
Convert to Mark Mode.
EXIT
94
Play
Return to normal TV viewing.
■■When selected music files are played
Page 1/1
Music List
Mark Mode
Drive1
USB1 External
001. - B01.mp3
00:00
Page 1/1
002. - B02.mp3
00:00
003. - B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Change Device
Select the target folder or drive.
2
3
Select the desired music title.
BLUE or
4
5
Change Numbers
Convert to Mark Mode.
Mark desired music file.
RED
Marked music file is played.
Mark Mode
P
Q.MENU
Page Change
Option
MARK
Mark
Exit
• When one or more music files are marked,
the marked music title will be played in
sequence. For example, if you want to listen
to only one music repeatedly, just mark the
music only and play it. If no music is marked,
all the music in the folder will be played in
sequence.
• If you want to activate Random playback, you
must set Option->Set audio play.->Random
to On.
TO USE A USB OR PC DEVICE
1
To Movie List
Mark
95
TO USE A USB OR PC DEVICE
Using the remote control
RED
GREEN
Mark all music files on the screen.
YELLOW
Deselect all marked music files.
BLUE
Exit the Mark Mode.
EXIT
TO USE A USB OR PC DEVICE
96
Play the selected music file.
Return to normal TV viewing.
Using the Music List function, play
Page 1/1
Music List
3 file(s) Marked
Drive1
USB1 External
Page 1/1
Set Audio Play.
►
004. - B01.mp3
00:00
005. - B02.mp3
00:00
005. - B002.mp3
■
1
II ◄◄ ►►
or
Set Audio.
006. - B03.mp3
00:00
◄►
Play with Photo
007. - B04.mp3
00:00
008. - B05.mp3
00:00
Close
02:30 / 03:25
Q.MENU
Option
Hide
Exit
Show the Option menu.
Select Set Audio Play. or Set Audio.
NOTE
►►Option values changed in Movie List does not affect Photo List and Music List.
►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List
excluding Movie List.
►►You can listen to the music only within the device currently played.
TO USE A USB OR PC DEVICE
2
►
►
Choose options.
97
TO USE A USB OR PC DEVICE
Using the remote control
■
►
II
◄◄ / ►►
Start playing the selected music files and then move to the Photo List.
GREEN
TO USE A USB OR PC DEVICE
98
Stop the playing music file.
Press the PLAY(►) button to return to normal playback.
When you press the Pause(II) button while playing the file, the playback will be
paused.
When you press the Pause(II) button again while the playback is paused, it will
resume the playback.
When playing,
When you press the REW(◄◄) button, the previous music file will be played.
When you press the FF(►►) button, the next music file will be played.
Press the ENERGY SAVING button repeatedly to increase the brightness of your
screen.(Refer to p. 108)
MENU
or
BACK
EXIT
<>
Q.MENU
Show the Option menu.
■■ When you press the Back button while the music is playing, the music player
currently playing will be hidden and only the music list will be displayed.
■■ When you press the Exit button while the Music player is displayed, only the
music will be stopped and the player will not return to normal TV viewing.
■■ When you press the Exit button while the music is stopped or while the music
player is hidden, the player will return to normal TV viewing.
■■ When using the < or > button during playback a cursor indicating the position can
be played.
■■When you select the Set Audio Play,
Set Audio Play.
Repeat
◄
On
►
Random
◄
Off
►
Previous
1
2
Select Repeat or Random.
Make appropriate adjustments.
TO USE A USB OR PC DEVICE
99
TO USE A USB OR PC DEVICE
■■When you select the Set Audio,
Set Audio.
Sound Mode
◄
Standard
►
Auto Volume
◄
Off
►
Clear Voice II
◄
Off
►
Balance
0
◄
L
R ►
Previous
TO USE A USB OR PC DEVICE
100
1
2
Select Sound Mode, Auto Volume, Clear Voice II or Balance.
Make appropriate adjustments. (Refer to p. 120 to 124)
■■ If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
■■ The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period of
time.
002. B02.mp3
► 00:31 / 04:04
NOTE
TO USE A USB OR PC DEVICE
►►A damaged or corrupted music does not play but displays 00:00 in playtime.
►►A music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
►►If you press OK, ■ buttons, screen saver is stopped.
►►The PLAY(►), Pause(II), ■ , ►►, ◄◄ buttons on the remote control are also available in this mode.
►►You can use the ►► button to select the next music and the ◄◄ button to select the previous music.
101
TO USE A USB OR PC DEVICE
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
MY MEDIA
DivX Reg. Code
Deactivation
Movie List
Press OK(
Photo List
Music List
TO USE A USB OR PC DEVICE
1
3
Close
) to view the list of photos in the USB or PC.
Option
2
Previous
You must register your device to
play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Exit
Select MY MEDIA.
BLUE
Select DivX Reg. Code.
Display DivX Reg. Code.
• Press the MENU/EXIT button to return to normal TV viewing.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This
is an official DivX Certified® device that plays DivX video. Visit www.divx.com
for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and
are used under license.
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274
NOTE
102
►►Movie files are supported as follows. Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
►►Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00,
Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264
►►The DRM file in DLNA server is not played when Movie List is in operation.
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the
available devices through the web-server and are blocked from activating more devices. DivX VOD
allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any
of those devices, the consumer had to contact DivX Support and request deletion. Now with this
added feature, consumers will be able to deactivate the device themselves and hence better manage
their DivX VOD devices.
MY MEDIA
DivX Reg. Code
Deactivation
Movie List
Press OK(
Photo List
Music List
4
No
Exit
Select MY MEDIA.
BLUE
Select Deactivation.
Select Yes.
TO USE A USB OR PC DEVICE
1
3
Yes
) to view the list of photos in the USB or PC.
Option
2
Previous
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Display Deactivation.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
103
GAME
GAME
Allows you to enjoy the games installed on the TV.
GAME
SETUP
PICTURE
AUDIO
TIME
LOCK
JUMP
OPTION
NETWORK
BLUETOOTH
MY MEDIA
GAME
HOLE IN ONE
SAVING CRYSTAL INVADER
WHACK A MOLE SUDOKU COOKING BURGER
URGENT SURVIVAL
Exit
Press OK(
) to play the game.
GAME
Customer Support
1
2
3
Simple Manual
Exit
Select GAME.
Select the desired game.
Enter the selected game mode.
• Press the EXIT button to return to normal TV viewing.
104
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1
2
Select Aspect Ratio.
•Y
ou can also adjust Aspect Ratio in the
PICTURE menu.
•F
or Zoom Setting, select 14:9, Zoom and
Select the desired picture format.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
or
Original
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes
back to Q.Menu.
Just Scan
105
PICTURE CONTROL
• 4:3
The following selection will allow you to view a picture with an original 4:3 aspect ratio.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note : When enlarging or reducing the picture,
the image may become distorted.
PICTURE CONTROL
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1 to 16.
▼ or ▲ button: Move the screen.
NOTE
►►You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in Component mode.
►►You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom in HDMI mode.
►►You can only select 4:3, 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
►►In DTV/HDMI/Component (over 720p) mode, Just Scan is available.
106
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
PICTURE
● Aspect
Ratio
Move
With Picture Wizard, you can adjust the picture quality of the
original image.
: 16:9
3
4
5
Mode
: Standard
• Contrast
• Brightness
100
50
• Sharpness
70
• Colour
70
Previous
Select PICTURE.
Select Picture Wizard.
Adjust Standard(Black Level, White Level,
Tint, Colour, Horizontal Sharpness, Vertical
Sharpness) or Preferred(Black Level, White
Level, Tint, Colour, Sharpness, Dynamic
Contrast, Colour Temperature.)
Select input source to apply the settings.
Next
• If you stop the setting before
the final stage, the changes
will not be applied
• The adjustment value is
saved to Expert1.
• Once the Picture Wizard sets
the image quality, the Energy
Saving is changed into Off.
• If the picture quality setting
of Expert1 is changed, use
the Picture Reset before
entering the Picture Wizard
to reset the picture quality
setting.
• Standard : mode to set standard picture quality.
• Preferred : mode to set user
preferred picture quality rather than standard picture.
PICTURE CONTROL
2
►
Energy Saving : Off
● Picture
1
►
Picture Wizard
Wizard
●● Picture
●
Picture Wizard
OK
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
107
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting
the Picture Mode.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
● Aspect
Ratio
● Picture
Wizard
PICTURE CONTROL
2
3
Mode
Ratio
● Picture
Wizard
●
●
: Off
Mode
Intelligent Sensor
: Off
Off
Off
Minimum
: Standard
100
Medium
100
• Contrast
• Brightness
50
Maximum
Screen Off
• Brightness
50
• Sharpness
70
• Sharpness
70
70
• Colour
70
• Colour
OK
: 16:9
Energy
Saving
Energy
Saving
: Off
● Picture
: Standard
• Contrast
● Aspect
Move
1
: 16:9
Energy
Saving
Energy
Saving
: Off
● Picture
PICTURE
OK
►
●
●
Move
►
PICTURE
Select PICTURE.
Select
Energy Saving.
Select Intelligent Sensor, Off, Minimum , Medium,
Maximum or Screen Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
• If you adjust “Energy Saving-Intelligent Sensor”, Sharpness, Colour, Colour Temperature feature
will not work.
• You can also adjust this feature by selecting Energy Saving button on the remote control.
108
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid Standard
Cinema
Bright Room
Sport
Game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes power consumption.
Optimizes video for watching movies.
This is the specification to optimize TV viewing in Bright Room.
Optimizes video for watching sports events.
Optimizes video for playing games.
● Aspect
Ratio
● Picture
Wizard
PICTURE
OK
: 16:9
● Aspect
Ratio
● Picture
Wizard
Move
: 16:9
OK
Vivid
►
●
• Contrast
• Brightness
50
• Sharpness
70
• Colour
70
►
:: Standard
►
Picture Mode
Mode
●●Picture
►
Standard
Energy Saving : Intelligent Sensor
PictureMode
Mode
●●Picture
::Vivid
Cinema
• Contrast
100
Bright Room
• Brightness 50
Sport
• Sharpness 70
Game
• Colour
70
ꔳExpert1
Energy Saving : Off
►
●
Move
►
PICTURE
100
ꔳExpert2
2
3
PICTURE CONTROL
1
Select PICTURE.
Select Picture Mode.
Select Vivid, Standard,
Sport or Game.
,
Cinema,
Bright Room,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
109
PICTURE CONTROL
• Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the
Picture Mode menu based on the programme category.
• When the Intelligent sensor function is on, the most suitable picture is automatically adjusted
according to the surrounding conditions.
• You can also adjust Picture Mode in the Q. Menu.
• Intelligent Sensor : Adjusts picture according to the surrounding conditions.
•
(Auto Power Saving) : Maximize reducting the power consumption without hurting the picture quality.
• If you adjust “Picture ModeCinema,
Bright Room”, “Energy Saving-Intelligent Sensor,
Minimum, Medium, Maximum” feature will not work.
”, “Energy Saving-Off, Minimum, Medium, Maximum” feature will
• If you adjust “Picture Modenot work.
Cinema :This is cinema quality mode to provide you the experience of watching a movie at
home. The user will be able enjoy the best level of satisfactory screen quality in any movie without any separate adjustments. Cinema expresses the optimal screen quality when it is darkest.
When selecting
Cinema,
Bright Room Aspect ratio changes to Just scan.
•
Cinema(Thomlinson Holman ’s Experiment)is the audio and video certification standard of
THX established by George Lucas, who directed the movie Star Wars, and Thomlinson.
This is the product to be certified in THX display area and guarantees screen quality that exceeds
the display standard specification in both hardware and software.
•
PICTURE CONTROL
110
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temp.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
It is not availab le to use this function in "
PICTURE
Ratio
● Picture
Wizard
Bright Room".
PICTURE
OK
● Aspect
: 16:9
Ratio
Move
OK
: 16:9
● Picture
Wizard
Vivid
Energy Saving : Intelligent Sensor
Standard
PictureMode
Mode
●●Picture
::Vivid
●
Energy Saving : Off
►
●
Cinema,
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
100
50
►
:: Standard
►
Picture Mode
Mode
●●Picture
►
● Aspect
Move
,
Cinema
Bright Room
70
Sport
70
Game
ꔳExpert1
ꔳExpert2
Select PICTURE.
2
Select Picture Mode.
3
Select Vivid, Standard, Sport or Game.
4
PICTURE CONTROL
1
Select Contrast, Brightness, Sharpness, Colour, Tint or Colour Temp..
5
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
►You
►
cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
►►When the
Cinema,
Bright Room or Expert1/2 are selected, you can select Contrast,
Brightness, H Sharpness, V Sharpness, Colour or Tint.
111
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special
video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the
“Picture Reset” function for each Picture Mode.
Image shown may differ from your TV.
PICTURE
Move
PICTURE
OK
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
R
G
• Colour Temp. 0
W
C
•• Advanced
Advanced Control
Control
• Picture Reset
►
OK
►
• Brightness
• Sharpness
70Contrast
Dynamic
• Colour Dynamic
70Colour
R 0
• Tint
Noise Reduction
• Colour
Temp.
0
Advanced
Control
Gamma
• Advanced Control
Black Level
• Picture Reset
Film Mode
• Screen
Move
• Screen
50
◄ High
►
High
G
Medium
Medium
Auto
Off
Colour Gamut
Wide
▼
Close
1
PICTURE CONTROL
2
3
4
Select PICTURE.
Select Advanced Control.
Select your desired Source :
Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level,
Film Mode, Colour Gamut, Edge Enhancer or xvYCC. (Refer to p. 114 to 115)
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
112
EXPERT PICTURE CONTROL
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
Image shown may differ from your TV.
● Aspect
Ratio
● Picture
Wizard
Move
PICTURE
OK
: 16:9
Vivid
Energy Saving : Intelligent Sensor
Standard
PictureMode
Mode
●●Picture
::Vivid
●
• Contrast
• Brightness
50
• Sharpness
• Colour
70
Sport
70
Game
• Sharpness
70Contrast
Dynamic
• Colour Noise Reduction
70
• Tint
0 R
Gamma
• Colour Temp. 0 W
Black Level
•• Advanced
Advanced Control
Control
Film Mode
• Picture Reset
Colour Gamut
Cinema
Bright Room
• Screen
►
100
►
ꔳExpert1
ꔳ
Expert1
ꔳ Expert2
OK
• Brightness
50
◄ Off
►
Off
G
Medium
C
Auto
►
Move
►
PICTURE
Off
Standard
Edge Enhancer
Off
xvYCC
Auto
Expert Pattern
Off
▼
Close
1
3
4
5
6
Select Picture Mode.
Select
Expert1 or
Expert2.
Select Expert Control.
PICTURE CONTROL
2
Select PICTURE.
Select your desired Source.
Make appropriate adjustments.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
113
PICTURE CONTROL
*This feature is not available for all models.
■■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.
■■ Adjusts screen colours so that they look livelier, richer and clearer. This feaDynamic Colour
ture enhances hue, saturation and luminance so that red, blue, green and
(Off/Low/Medium/High )
white look more vivid.
Noise Reduction
(Off/Low/Medium/High/ ■■ Reduces screen noise without compromising video quality.
Auto)
Dynamic Contrast
(Off/Low/High)
Gamma
(Low/Medium/High)
Black Level
(Low/High/Auto)
PICTURE CONTROL
Film Mode
(On/Off)
Colour Gamut
(Advanced Control/
Expert Control)
(Wide/Standard)
Edge Enhancer
(On/Off)
xvYCC
(Auto/off/on)
Expert Pattern
114
■■ You can adjust brightness of dark area and middle gray level area of the picture.
• Low : Makes dark and middle gray level area of the picture brighter.
• Medium : Expresses original picture levels.
• High : Makes dark and middle gray level area of the picture darker.
■■ Set up to Medium in TV modes. it's set up to disable.
• Low : The picture of the screen gets darker.
• High : The picture of the screen gets brighter.
• Auto : Sets black level of the screen to High or Low automatically according to
the input signal level.
■■ This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
■■ You can watch a cinema-like video by eliminating judder effect.
■■ Uses this function when you watch film-originated movie contents.
• Standard : Mode to use original colour area regardless of the display
characteristics.
• Wide: Mode to use maximum colour area of the TV display.
• On the photo using a USB DEVICE, In case of picture mode is photo, The
Details become Wide/sRGB
■■ Makes the edge of the picture clearer and distinctive.
*This feature is not available for all models.
■■ This is the function to express richer colour.
■■ This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted through HDMI
■■ This function is disabled When a Off
Colour Filter
(Off/Red/Green/Blue)
Colour Temperature
(Medium/Warm/Cool)
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 to +50.
b. • Method : 20 Point IRE
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 to 100. You can adjust Red, Green or Blue
according to each setting.
• Red/Green/Blue: The adjustment range is -50 to +50.
■■ As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colours but can be used to selectively
adjust the 6 colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the general video.
■■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment
range is -30 to +30.
■■ This feature is disable in RGB-PC and HDMI (PC) mode.
PICTURE CONTROL
Colour Management
System
■■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
115
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
70
• Tint
0
R
G
• Colour
70
All picture settings
G
•?
Tint
0 R will be reset.
• Colour Temp. 0
W
C
Continue?
• Colour
Temp. 0
• Advanced Control
• Picture Reset
• Advanced Control
• Picture Reset Yes
4
C
►
3
W
►
►
50
►
PICTURE CONTROL
2
OK
• Brightness
• Screen
1
Move
No
• Screen
Select PICTURE.
Select Picture Reset.
Select Yes.
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
116
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for
prolonged periods.
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pattern are alternately displayed. It is
difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour
pattern is operating.
►
● Factory
Reset
ID
Setting
Blaster :1
● Set
: Home Use
● Mode
: Off
● IR
:: Normal
Normal
Reset
ID
Setting
Blaster :1
Normal
Standard
►
►
● IR
:: Normal
Normal
OK
Orbiter
►
● ISM Method
● Mode
Colour Wash
White Wash
: Home Use
: Off
PICTURE CONTROL
• If you do not need this function, set Normal.
Select OPTION.
2
Move
● ISM Method
●
● Set
Select ISM Method.
3
4
OPTION
OK
● Language(Language)
● Factory
1
Move
● Language(Language)
►
OPTION
Select Normal, Orbiter, Colour
Wash or White Wash.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
117
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to “Home Use ” mode for the best picture in your home environment.
“Store Demo ” mode is an optimal setting for displaying at stores.
OPTION
Move
OPTION
OK
Move
● Language(Language)
● Language(Language)
● ISM
● ISM
Method
● Factory
ID
Method
● Factory
: Normal
Reset
● Set
:: Home
Home Use
Use
● Mode Setting
Choose the setting mode you want.
:: Home Use Use
● IR
: Off
● IR
: Off
►
Blaster ID
Blaster :1
Selecting the environment.
:1
● Mode Setting
►
● Set
: Normal
Reset
OK
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
Store Demo
Home Use
● Demo
Mode
Off
Close
PICTURE CONTROL
1
Select OPTION.
2
Select Mode Setting.
3
4
Select Store Demo or Home Use.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
118
DEMO MODE
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is
reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
Move
● Language(Language)
● Language(Language)
● ISM
● ISM
Method
● Set
: Normal
Reset
ID
:1
● Set
:: Home
Home Use
Use
● IR
: Off
►
● Mode Setting
Blaster Method
● Factory
►
● Factory
: Normal
Reset
ID
OK
:1
Selecting the environment.
● Mode Setting
Choose the setting mode you want.
:: Home
Home Use Use
● IR
: Off
Blaster Select [Store Demo] to use this TV in store. To use
this TV at home, select [Home Use].
Store Demo
Home Use
● Demo
Mode
On
Close
1
3
4
5
PICTURE CONTROL
2
Select OPTION.
Select Mode Setting.
Select Store Demo.
Select On .
Move to the previous menu screen.
If you want to stop the demo, press any button. (except
+ , - button)
for MUTE,
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
119
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each programme.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
AUDIO
Move
● Clear
Voice II
: Off
3
● Balance
● Sound
1
2
3
Mode
AUDIO
OK
: Off
● Auto
● Clear
0
L
: Standard
R
Move
Volume
Voice II
: Off
● Balance
● Sound
Mode
OK
MHEG
Off
: Off
3
►
Volume
►
● Auto
On
0
L
R
: Standard
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Select AUDIO.
Select Auto Volume.
SOUND & LANGUAGE CONTROL
Select On or Off.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
120
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Volume
: Off
Off
:: Off
● Balance
● Sound
1
2
33
0
L
R
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Select AUDIO.
Move
Volume
Clear Voice
Voice II
II
●●Clear
: Off
Off
:: Off
● Sound
Mode
● Clear
33
● Balance
OK
L
0 ● Level
Voice II
R
◄
3
Off
-
5
+
: Standard
• Infinite Sound : Off
• Treble
50
• Bass
50
• Reset
Close
• If you select “On” for Clear Voice II,
Infinite Sound feature will not work.
• Select levels from ‘-6’ to ’+6’.
Select Clear Voice II.
Select On or Off.
Adjustment for Clear Voice Level With selecting On
4
►
Select Level.
Make desired adjustment.
SOUND & LANGUAGE CONTROL
3
Mode
● Auto
►
Clear Voice
Voice II
II
●●Clear
AUDIO
OK
►
● Auto
Move
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
121
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Volume
● Clear
Voice II
: Off
3
Standard
:: Standard
3
Volume
● Clear
0
L
R
Voice II
Move
OK
: Off
: Off
● Balance
3
L
Standard
0 Standard
Standard
:: Standard
• Infinite Sound : Off
• Treble
50
• Infinite Sound : OffCinema
• Treble
50 Sport
• Bass
50
• Bass
• Reset
• Reset
Select AUDIO.
R
Music
Sound Mode
Mode
●●Sound
►
SOUND & LANGUAGE CONTROL
2
Sound Mode
Mode
●●Sound
● Auto
►
● Balance
1
AUDIO
OK
: Off
►
● Auto
50 Game
• You can also adjust Sound Mode in the Q.
Menu.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or
Game.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
122
SOUND SETTING ADJUSTMENT -USER MODE
AUDIO
Move
Volume
● Clear
Voice II
: Off
● Auto
3
4
5
Sound Mode
Mode
●●Sound
Standard(User)
:: Standard
L
R
Voice II
Move
OK
: Off
: Off
3
L
R
Standard(User)
0 Standard
● Balance
►
3
0
Music
Sound Mode
Mode
●●Sound
Standard(User)
:: Standard
• Infinite Sound : Off
• Treble
50
• Infinite Sound : OffCinema
• Treble
50 Sport
• Bass
50
• Bass
• Reset
• Reset
►
2
Volume
● Clear
● Balance
1
AUDIO
OK
: Off
►
● Auto
50 Game
Select AUDIO.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or
Game.
Select Treble or Bass.
Set the desired sound level.
INFINITE SOUND
Select this option to sound realistic.
1
2
3
Select AUDIO.
Select Infinite Sound.
Infinite Sound : Infinite Sound is a patented
LG proprietary sound processing technology
that strives immersive 5.1 surround sound
impression with front two loudspeakers.
Select On or Off.
SOUND & LANGUAGE CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
123
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Volume
● Clear
Voice II
: Off
: Off
1
2
SOUND & LANGUAGE CONTROL
3
Mode
● Auto
3
00
L
R
Move
Volume
● Clear
Voice II
Mode
OK
: Off
: Off
●● Balance
Balance
►
●● Balance
Balance
● Sound
AUDIO
OK
►
● Auto
Move
3
0●0LBalance
: Standard
● Sound
• Infinite Sound : Off
: Standard
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
R
0◄
L
R
Close
Select AUDIO.
Select Balance.
Make desired adjustment.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
124
►
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI1, HDMI2, HDMI3 or HDMI4 with HDMI to DVI cable, the TV
speaker can be operational even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
Move
: Off
AUDIO
OK
3
● Balance
: Off
OK
3
● Balance
: Standard
● Sound
• Infinite Sound : Off
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
●●TV
TVSpeaker
Speaker
: :On
On
TVSpeaker
Speaker
●●TV
On
: :On
1
Mode
►
● Sound
Move
● Clear Voice II
Mode
: Standard
Off
On
PCM
►
● Clear Voice II
Select AUDIO.
2
Select TV Speaker.
3
Select On or Off.
NOTE
►►When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
►►Some menus in AUDIO are disabled when TV Speaker is set to Off.
SOUND & LANGUAGE CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
125
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
● Clear Voice II
: Off
AUDIO
OK
3
● Clear Voice II
● Balance
SOUND & LANGUAGE CONTROL
3
4
: Off
3
• Infinite Sound : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
● TV Speaker
: On
● TV Speaker
: On
: Standard
● Sound
►
Mode
►
2
● Balance
OK
? All audio settings will be resetted.
: Standard
Continue?
• Infinite Sound : Off
● Sound
1
Move
Mode
Yes
No
Select AUDIO.
Select Reset.
Select Yes.
Initialize the adjusted value.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
126
I/II
STEREO/DUAL RECEPTION
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1
Select Audio.
2
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
■■ Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
DUAL ISends the primary broadcast language to the loudspeakers.
DUAL IISends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
SOUND & LANGUAGE CONTROL
■■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the
clarity of sound is improved.
127
SOUND & LANGUAGE CONTROL
NICAM RECEPTION
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
SPEAKER SOUND OUTPUT SELECTION
SOUND & LANGUAGE CONTROL
128
In AV, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
ON-SCREEN MENU LANGUAGE SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
Select your desired language.
* If you want to change Language selection
1
Select OPTION.
2
Select Language(Language).
3
Select Menu Language.
4
Select your desired language.
Save.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
5
! NOTE
►►If you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On Screen
Display) the installation menu will continuously appear until the set up is completed whenever the TV is
switched on.
?
129
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset the clock.
TIME
Move
TIME
OK
Move
● Clock
►
● Clock
● Off
Time
: Off
● Off
Time
● On
Time
: Off
● On
Time
: Off
● Sleep
● Sleep
Timer
Timer
Move
Date
: Off
Month
: Off
Year
: Off
OK
OK
◄
3
►
Mar.
2008
Hour
16
Minute
09
Close
1
2
TIME SETTING
3
Select TIME.
Select Clock.
Set the year, month, date, time.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
130
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
● Clock
Time
: Off
● Off
● On Time
: Off
● On Time
● Sleep
: Off
►
Timer
►
● Off
Move
● Clock
Time
● Sleep
Timer
OK
1 Mar 2007 16:09
: Off
Repeat
◄
Off
: Off
Hour
00
: Off
Minute
00
Input
►
Antenna
Programme
TV1
Volume
30
Close
1
2
3
5
6
•F
or On Time function only
Select Off Time or On Time.
2
Select Repeat.
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
Set the hour.
1
3
4
Select Input.
Select the input source.
Set the programme.
Adjust volume level at switch-on.
TIME SETTING
4
•T
o cancel On/Off Time function, select Off.
Select TIME.
Set the minutes.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
131
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1
2
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min.
•W
hen you switch the TV off, the preset sleep timer is cancelled.
•Y
ou can also adjust Sleep Timer in the TIME menu.
TIME SETTING
132
PARENTAL CONTROL
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
If a channel is locked, enter the password to unlock it temporarily.
LOCK
● Set
5
Off
Off
● Lock System
: :Off
Off
● Block
Programme
● Block
Programme
● Input
Block
● Input
Block
►
: :Off
Off
Lock
: Off
● Key
Select LOCK.
OK
Lock
On
: Off
• If you forget your password, press ‘0’, ‘3’,
‘2’, ‘5’ on the remote control handset.
Select Lock System.
Select On.
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
PARENTAL CONTROL
4
Move
Password
►
3
LOCK
● Set
►
2
OK
● Lock System
● Key
1
Move
Password
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
133
PARENTAL CONTROL
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
It is available to use this function in Lock System ”On”.
Enter a password to watch a blocked programme.
Programme Edit
Favourite Group :
C
TV
LOCK
● Set
Move
Password
● Lock
System
: On
● Block
Programme
● Input
Block
● Key
OK
Lock
1 ARD
2 BBC1
3 ARD
4 C 01
5 S 46
6 C 05
7 C 06
8 C 10
9 S 11
▲
▼
: Off
Pr. Change
Navigation
P
Page Change
Previous
Block/Unblock
1
Select LOCK.
2
3
4
PARENTAL CONTROL
5
Select Lock System.
Select Block Programme.
Enter the Block Programme.
YELLOW
Select a programme to be locked.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
134
EXTERNAL INPUT BLOCKING
Enables you to block an input.
It is available to use this function in Lock System ”On”.
■■ Image shown may differ from your TV.
LOCK
● Set
Move
Password
● Lock
System
● Set
: On
Programme
● Input Block
●
Lock
● AV1Move
System
▲
● Key
◄
: On
Lock
Off
►
Off
● Component1
Programme
● Component2
● Input Block
●
● RGB
: Off
● HDMI1
Off
● Block
▼
: Off
OK
● AV2
Password
● Lock
● Block
● Key
LOCK
OK
▲
▼
Off
Off
Off
● HDMI2
Off
● HDMI3
Off
● HDMI4
Off
Close
1
2
3
5
Select Lock System.
Select Input Block.
Select input source.
PARENTAL CONTROL
4
Select LOCK.
Select On or Off.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
135
PARENTAL CONTROL
KEY LOCK
This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so
that it can only be used with the remote control.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
LOCK
● Set
● Lock
2
3
LOCK
OK
System
● Set
: Off
Move
● Lock
System
: Off
● Block
Programme
● Block
Programme
● Input
Block
● Input
Block
● Key Lock
: Off
: Off
● Key Lock
: Off
: Off
Select Key Lock.
Select On or Off.
►
Select LOCK.
OK
Password
Off
Off
►
1
Move
Password
On
• In Key Lock ‘On’, if the TV is turned off, press the
/ I, INPUT, P
button on the TV or POWER
or NUMBER buttons on the remote
INPUT, P
control then the set will be turned on.
• With the Key Lock On, the display ‘
Key
Lock On ’ appears on the screen if any button on
the front panel is pressed while viewing the TV.
• When another OSD is displayed, ‘
Key Lock
On ’ will not operate.
PARENTAL CONTROL
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
136
TELETEXT
ENERGY
Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and
many other topics.
AV MODE
INPUT
TV
SAVING
1
2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages which are
selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of
teletext information.
LIST
0
Q.VIEW
MARK
FAV
CHAR/NUM
RATIO
P
P
A
G
E
DELETE
MUTE
MENU
Q.MENU
OK
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode reappears.
BACK
EXIT
FREEZE
SIMPLE TEXT
■■ Page selection
Enter
1
the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the
correct page number.
2 The P
button can be used to select the preceding or following page.
TELETEXT
137
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
■■ Block / group / page selection
1 With the blue button you can progress from block to block.
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the next
group.
button can be used.
4 Alternatively the P
The red button returns to the previous selection. Alternatively the P button can be used.
■■ Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
■■Page selection
1
2
3
TELETEXT
138
4
Press the T.OPT button and then use
button to select
menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding
coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with
the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■■ Press the T. OPT button and then use
button to select the Text Option menu.
Text Option
■■Index
Select the each index page.
Index
Time
Hold
Reveal
■■Time
Update
Close
When viewing a TV programme, select this menu to display the time at the top right
hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is displayed at
the bottom of the screen. To hold or change the sub page, press the RED/GREEN,< > or NUMBER buttons.
■■ Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below the
time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the
screen and the automatic page change is inactive.
■■Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
■■Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at
the top left hand corner of the screen. When the updated page is available then display will change to
the page number. Select this menu again to view the updated teletext page.
TELETEXT
139
APPENDIX
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
The remote control
does not work
■■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control
directly at the TV.
■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■■ Install new batteries.
■■ Is the sleep timer set?
Power is suddenly
■■ Check the power control settings. Has the Power supply been interrupted.
turned off
■■ If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The video function does not work.
■■ Check whether the TV is switched on.
■■ Try another channel. The problem may be with the broadcast.
No picture & No sound ■■ Is the power cord inserted correctly into the mains?
■■ Check your antenna direction and/or location.
■■ Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly ■■ This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
after switching on
■■ Adjust Colour in menu option.
No or poor colour
or poor picture
■■ Allow a sufficient distance between the TV and the VCR.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the video cables installed properly?
■■ Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
No picture
APPENDIX
140
when connecting
HDMI
■■ Check for local interference such as an electrical appliance or power tool.
■■ Station or cable channel experiencing problems, tune to another station.
■■ Station signal is weak, reposition the antenna to receive weaker stations.
■■ Check for sources of possible interference.
■■ Check antenna (Change the position of the antenna).
■■ Check that your HDMI cable is High Speed HDMI Cable.
If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display
can result. Please use the High Speed HDMI Cable.
The audio function does not work.
Picture OK & No
sound
No output from one
of the speakers
Unusual sound from
inside the TV
No sound when connecting HDMI or USB
■■ Press the
+ or - button.
■■ Sound muted? Press MUTE button.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the audio cables installed properly?
■■ Adjust Balance in menu option.
■■ A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
■■ Check HDMI cable is High Speed HDMI Cable.
■■ Check USB cable over version 2.0.
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
■■ Adjust resolution, horizontal frequency, or vertical frequency.
■■ Check the input source.
■■ Use Auto configure or adjust clock, phase, or H/V position. (Option)
■■ Check the signal cable.
■■ Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user changes the picture settings, ■■ It means that the TV is currently set to Store Demo mode.
To switch to Home use mode you should do the followings:
the TV automatically
From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose
converts back to the
Home use. Now, you have completed switching to the Home use mode.
initial settings after a
certain period of time.
APPENDIX
141
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is
almost dry, and then use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate
before switching on.
Cleaning the Cabinet
■■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■■ Do not to use a wet cloth.
Extended Absence
CAUTION
►►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
APPENDIX
142
PRODUCT SPECIFICATIONS
50PK7***
50PK9***
50PK760R-TA
50PK950R-TA
with stand
1184.0 mm x 801.0 mm x 294.5 mm
1190.0 mm x 804.5 mm x 294.5 mm
without stand
1184.0 mm x 738.5 mm x 52.4 mm
1190.0 mm x 737.0 mm x 52.4 mm
with stand
without stand
34.5 kg
29.9 kg
34.8 kg
30.2 kg
MODELS
Dimensions
(Width x Height x
Depth)
Weight
MODELS
Dimensions
(Width x Height x
Depth)
Weight
1408.8 mm x 937.9 mm x 384.0 mm
without stand
1408.8 mm x 860.7 mm x 52.4 mm
with stand
without stand
50.9 kg
43.3 kg
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
VHF: NZ1 to E20, UHF: E21 to E69, CATV: S1 to S20, HYPER: S21 to S47
External Antenna Impedance
Operating
Temperature
Supported movie files
60PK950R-TA
with stand
Television System
Environment condition
60PK9***
Operating Humidity
75 Ω
0 °C to 40 °C
Less than 80 %
Storage Temperature
-20 °C to 60° C
Storage Humidity
Less than 85 %
Refer to p. 74 to 75
■■ The specifications shown above may be changed without prior notice for quality improvement.
■■ For the power supply and power consumption, refer to the label attached to the product.
APPENDIX
143
APPENDIX
IR CODES
*This feature is not available for all models.
Code (Hexa)
95
Function
Energy Saving
POWER
08
R/C BUTTON
R/C BUTTON(POWER ON/OFF)
0B
INPUT
R/C BUTTON
79
RATIO
R/C BUTTON
0F
TV
R/C BUTTON
45
Q.MENU
R/C BUTTON
43
MENU
R/C BUTTON
40
Up (
41
Down (
07
Left (
06
Right (
44
OK( )
R/C BUTTON
R/C BUTTON
)
)
R/C BUTTON
R/C BUTTON
)
)
R/C BUTTON
28
BACK
R/C BUTTON
5B
EXIT
R/C BUTTON
30
AV MODE
R/C BUTTON
02
+
R/C BUTTON
03
-
R/C BUTTON
1E
FAV (MARK) (CHAR/NUM)
R/C BUTTON
09
MUTE (DELETE)
R/C BUTTON
00
P
R/C BUTTON
01
P
R/C BUTTON
Number Key 0 to 9
R/C BUTTON
LIST
R/C BUTTON
1A
Q.VIEW
R/C BUTTON
72
RED Key
R/C BUTTON
71
GREEN Key
R/C BUTTON
10 to 19
53
63
YELLOW Key
R/C BUTTON
61
BLUE Key
R/C BUTTON
20
TEXT
R/C BUTTON
21
T.OPT(T.Option)
R/C BUTTON
7E
APPENDIX
144
Note
R/C BUTTON
B1
▀
R/C BUTTON
B0
►
R/C BUTTON
BA
l l (FREEZE)
R/C BUTTON
8F
◄◄
R/C BUTTON
8E
►►
R/C BUTTON
59
NetCast
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
AUDIO IN
(RGB/DVI)
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s funcLAN
tions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
RS-232C IN
(CONTROL & SERVICE)
VIDEO
L(MONO)
AUDIO
R
3
2
1
/DVI IN
COMPONENT IN
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
RGB IN (PC)
AV IN 1
RS-232C Setup
2
1
VIDEO
ANTENNA
IN
AUDIO
Type of Connector; D-Sub 9-Pin Male
No.
1
2
3
4
5
6
7
8
9
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
3-Wire Configurations(Not standard)
7-Wire Configurations (Standard RS-232C cable)
RXD TXD
GND
DTR
DSR
RTS
CTS
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
APPENDIX
PC
145
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.150
OPTION
● Country
APPENDIX
146
: UK
● Disability Assistance
● Disability Assistance
● Power
● Power
Indicator
Reset
::11
● Mode
Setting
Blaster
: UK
Reset
◄
● Set ID
::11
: Home Use
● Mode
: Home Use
: Off
● IR
►
● Set ID
OK
Indicator
● Factory
►
3
Move
● Country
● IR
2
OPTION
OK
● Language(Language)
● Factory
1
Move
● Language(Language)
Setting
Blaster
: Off
1
►
Close
Select OPTION.
Select Set ID.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to 99.
• Press the BACK button to move to the previous menu screen.
Communication Parameters
■■ Baud rate : 9600 bps (UART)
■■ Data length : 8 bits
■■ Parity : None
■■ Stop bit : 1 bit
■■ Communication code : ASCII code
■■ Use a crossed (reverse) cable.
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
1
2
01. Power
k
DATA
(Hexadecimal)
a
00 to 01
02. Aspect Ratio
k
c
Refer to p. 148
03. Screen Mute
k
d
Refer to p. 148
04. Volume Mute
k
e
00 to 01
05. Volume Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Remote control lock mode
k
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
15. Balance
k
t
00 to 64
16. Colour Temperature
x
u
00 to 64
17. ISM Method
j
p
Refer to p. 150
18. Energy Saving
j
q
00 to 05
19. Auto Configuration
j
u
01
20. Tune Command
m
a
Refer to p. 150
21. Programme Add/Skip
m
b
00 to 01
22. Key
m
c
Key Code
23. Input select (Main)
x
b
Refer to p. 151
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0x0 to
0x63) on transmission/receiving protocol.
: To transmit command data.
* [DATA] Transmit ‘FF’ data to read status of command.
: Carriage Return
* [Cr] ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates
present status data. If the data is data write mode,
it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
APPENDIX
* The set transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
* Note : During USB operations such as Dvix or EMF, all
non-viable
functions or communication errors.
commands except Power(ka) and Key(mc) are not executed and treated as NG.
Data00: Illegal Code
147
APPENDIX
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data00 : Power Off
Ack
01 : Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
05. Volume Control (Command: k f)
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data feed
back presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when TV is power On.
►► To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
02. Aspect Ratio (Command: k c) (Main Picture Size)
[f][ ][Set ID][ ][OK/NG][Data][x]
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
Ack
07 : 14:9
09 : Just Scan
10 to 1F : Cinema Zoom 1 to 16
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60
Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz)
mode, Just Scan is available.
03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission
APPENDIX
148
04. Volume Mute (Command: k e)
[k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
[k][g][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
►► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
13. Treble (Command: k r)
►► To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
14. Bass (Command: k s)
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data00 : Lock off
Ack
01 : Lock on
* If you are not using the remote control, use this
mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
[x][u][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
[m][ ][Set ID][ ][OK/NG][Data][x]
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
149
APPENDIX
17. ISM Method (Command: j p)
20. Tune Command (Command: m a)
►► To control the ISM method. You can also adjust ISM
Method in OPTION menu.
Transmission
►► Select channel to following physical number.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data02:
04:
08:
20:
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data00 :High channel data
Data01 :Low channel data
ex. No. 47 -> 00 2F (2FH)
Data02 :0x00 : Analogue Main
Orbiter
White wash
Normal
Colour Wash
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Ack
Ack
[p][ ][Set ID][ ][OK/NG][Data][x]
[a][ ][Set ID][ ][OK/NG][Data][x]
18. Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You can
also adjust Energy Saving in OPTION menu.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Power Saving
Function
7
6
5
4
0
0
0
0
0
0
0
0
0
0
0
0
Level
Description
3
2
1
0
Low Power
0
0
0
0
Off
0
Low Power
0
0
0
1
Minimum
0
0
Low Power
0
0
1
0
Medium
0
0
0
Low Power
0
0
1
1
Maximum
0
0
0
Low Power
0
1
0
1
Screen Off
0
0
0
Low Power
0
1
0
0
Intelligent
Sensor
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
21. Programme Add/Skip(Command: m b)
►► To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 : Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 :
Step 100
6E : Step 110
73 :
74 :
APPENDIX
150
Step 115
Step 116
19. Auto Configure(Command: j u)
CF : Step 199
►► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
FE : Step 254
FF : Step 255
[j][u][ ][Set ID][ ][Data][Cr]
Data01: To set
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
22. Key(Command: m c)
►► To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
DataKey code - Refer to page 144.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
DataStructure
MSB
0
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
1
0
0
0
HDMI
Input Number
0
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
151
APPENDIX
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL, MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
Linux kernel 2.6, busybox, e2fsprogs, jfsutils, lzo, msdl-1.1, mtd-utils, ntpclient, procps, udhcpc
LGPL LIBRARIES:
Atk, cairo, directFB, ffmpeg, glib, GnuTLS, gtk+, iconv, libintl, libgcrypt, libgpg-error, libsoup, libusb,
pango, uClibc, webkit
MPL LIBRARIES:
Nanox, spidermonkey
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of media, shipping and handling upon e-mail request
to LG Electronics : opensource@lge.com
This offer is valid for a period of three (3) years from the date of the distribution of this product by
LG Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/oldlicenses/gpl-2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
APPENDIX
152
This product includes other open source software.
■■ boost C++: software developed by http://www.boost.org distributed under the Boost Software
License, Version 1.0
■■ c-ares : copyright © 1998 by the Massachusetts Institute of Technology
■■ expat:
• copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper
• copyright © 2001-2007 Expat maintainers.
■■ fontconfig: copyright © 2001, 2003 Keith Packard
■■ freetype: copyright © 2003 The FreeType Project (www.freetype.org).
■■ ICU: copyright © 1995-2008 International Business Machines Corporation and others.
■■ libcurl: copyright © 1996 - 2008, Daniel Stenberg.
■■ libjpeg: This software is based in part on the work of the Independent JPEG Group copyright
© 1991 – 1998, Thomas G. Lane.
■■ libmng: copyright © 2000-2007 Gerard Juyn, Glenn Randers-Pehrson
■■ libpng: copyright © 1998-2008 Glenn Randers-Pehrson
■■ libupnp: copyright © 2000-2003 Intel Corporation
■■ libxml2 : copyright © 1998-2003 Daniel Veillard
■■ libxslt: copyright © 2001-2002 Daniel Veillard
■■ lua interpreter: copyright © 1994–2008 Lua.org, PUC-Rio
■■ md5: copyright © 1991-2, RSA Data Security, Inc
■■ openSSL:
• cryptographic software written by Eric Young.
• software written by Tim Hudson.
• software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)
■■ p
ixman:
copyright © 1987, 1988, 1989, 1998 The Open Group
copyright © 1987, 1988, 1989 Digital Equipment Corporation
copyright © 1999, 2004, 2008 Keith Packard
copyright © 2000 SuSE, Inc.
copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
copyright © 2004 Nicholas Miell
copyright © 2005 Lars Knoll & Zack Rusin, Trolltech
copyright © 2005 Trolltech AS
copyright © 2007 Luca Barbato
copyright © 2008 Aaron Plattner, NVIDIA Corporation
copyright © 2008 Rodrigo Kumpera
copyright © 2008 André Tupinambá
copyright © 2008 Mozilla Corporation
copyright © 2008 Frederic Plourde
■■ portmap: copyright © 1983,1991 The Regents of the University of California.
■■ tiff: copyright © 1987, 1993, 1994 The Regents of the University of California.
■■ tinyxml: copyright © 2000-2006 Lee Thomason
■■ xyssl:
• Copyright © 2006-2008 Christophe Devine
• Copyright © 2009 Paul Bakker
■■ zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
APPENDIX
153
APPENDIX
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
APPENDIX
154
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
APPENDIX
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
155
APPENDIX
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software Foundation.
APPENDIX
156
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve
this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain
conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
APPENDIX
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
157
APPENDIX
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is
legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore
permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits
more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special circumstances.
APPENDIX
158
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from
the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates,
and performs whatever part of its purpose remains meaningful.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
APPENDIX
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
159
APPENDIX
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
APPENDIX
160
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
APPENDIX
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
161
APPENDIX
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer
to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any
later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
APPENDIX
162
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
MOZILLA PUBLIC LICENSE
Version 1.1
--------------1. Definitions.
1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. "Executable" means Covered Code in any form other than Source Code.
1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8. "License" means this document.
1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or
any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and installation
of an Executable, or source code differential comparisons against either the Original Code or another well known,
available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You.
For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
APPENDIX
2. Source Code License.
163
APPENDIX
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the
Original Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a
Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use,
sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i)
third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor
with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims
infringed by Covered Code in the absence of Modifications made by that Contributor.
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of
this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under
the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the
Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to
create that Covered Code and the date of any change. You must include a prominent statement that the Modification
is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in
which You describe the origin or ownership of the Covered Code.
APPENDIX
164
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is
made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has
been obtained.
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface and Contributor has knowledge of
patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant
the rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s)
You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License
in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations
to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of
the Initial
Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor
for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for
that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of
Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the
Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms
different from this License, provided that You are in compliance with the terms of this License and that the license
for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from
the rights set forth in this
License. If You distribute the Executable version under a different license You must make it absolutely clear that any
terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements
of this License are fulfilled for the Covered Code.
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in
the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to
the
extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary
skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use
it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
APPENDIX
6.1. New Versions.
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
165
APPENDIX
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is
not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling
in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of
themselves be deemed to be modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE
COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NONINFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH
YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL
DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR
OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE.
NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted
by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by
the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or
2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall
survive termination.
9. LIMITATION OF LIABILITY.
APPENDIX
166
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING
NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES,
BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR
LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH
LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] License and not to allow others to use your version of this file
under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of
this file under either the MPL or the [___] License."
APPENDIX
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the
Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for
Your Modifications.]
167
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
Download PDF

advertising