LG | 32LH200C | LG 32LH200C Owner’s Manual

OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO: MFL59868613 (1003-REV06)
Printed in Korea
www.lg.com
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
ACCESSORIES
This item is not included for all models.
ACCESSORIES
Ensure that the following accessories are included with your TV.
If an accessory is missing, please contact the dealer where you purchased the TV.
■ Here shown may be somewhat different from your TV.
Polishing Cloth
Polishing cloth for use on the screen.
Owner’s Manual
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Batteries
Do not use excessive force. This may
cause scratching or discolouration.
RATIO
RA
TIO
POWER
AV
V MODE
LIST
ENERGY SA
SAVING
VING
AV MODE
Q.VIEW
LIST
MUTE
MENU
ENERGY SAVING
Q.VIEW
MUTE
RETURN
MARK
FAV
Q.MENU
Power Cord
Remote Control
Dual Lock™
(This item is not included
for all models.)
(Refer to P.7)
x4
Bolts for stand assembly
(Refer to p.6)
Protection cover
(Refer to p.7)
1-screw for stand fixing
(Refer to p.6)
Protective Bracket and
Bolt for Power Cord
(Refer to p.6)
Wall Mounting Bracket(Separate purchase)
RW230
AW-47LG30M
(26/32LH2***)
(32/37/42LH2***)
1
CONTENTS
ACCESSORIES
............................................
1
PREPARATION
CONTENTS
Front Panel Controls..................................................... 4
Back Panel Information ................................................ 5
Stand Installation........................................................... 6
Not Using the desk-type stand...................................6
Attaching the TV to a desk...........................................6
How to secure the power cable................................. 6
Back Cover for Wire Arrangement ............................ 7
Swivel Stand ................................................................... 7
How to use Dual Lock™.............................................. 7
Careful Installation Advice........................................... 8
Desktop Pedestal Installation ..................................... 8
Wall Mount: Horizontal Installation .......................... 9
Kensington Security System ....................................... 9
Antenna Connection................................................... 10
................................................................. 40
Key Lock......................................................................... 43
Initializing(Reset to original factory settings) ..... 44
AV Mode........................................................................ 45
TO USB A USB DEVICE
When connecting the USB device.......................... 46
Photo List ...................................................................... 48
Music List....................................................................... 52
Movie List ...................................................................... 55
Divx Registration Code.............................................. 58
Deactivation.................................................................. 59
EXTERNAL EQUIPMENT SETUP
PICTURE CONTROL
HD Receiver Setup ...................................................... 11
DVD Setup......................................................................14
VCR Setup.......................................................................16
Other A/V Source Setup........................................... 18
USB In Setup ................................................................ 19
Speaker Output Setup............................................... 19
PC Setup........................................................................ 20
- Screen Setup for PC Mode .............................. 22
Picture Size (Aspect Ratio) Control ...................... 60
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ............................... 26
Turning on the TV....................................................... 28
Programme Selection ................................................ 28
Volume Adjustment .....................................................28
Quick Menu ................................................................. 29
On-Screen Menus Selection and Adjustment..... 30
Auto Programme Tuning ............................................ 31
Manual Programme Tuning ....................................... 32
Programme Edit ........................................................... 34
2
Selecting the Programme List .................................. 36
Favourite Programme Setup...................................... 37
Input List........................................................................ 38
Input Label .................................................................... 39
Energy Saving ............................................................... 62
Preset Picture Settings
- Picture Mode-Preset............................................ 63
Manual Picture Adjustment
- Picture Mode-User option................................. 64
Picture Improvement Technology........................... 65
Expert Picture Control ................................................66
Picture Reset................................................................. 69
Power Indicator .............................................................69
Demo Mode.................................................................. 70
SOUND & LANGUAGE CONTROL
Auto Volume Leveler................................................... 71
Preset Sound Settings - Sound Mode................... 72
Sound Setting Adjustment - User Mode.............. 73
SRS TruSurround XT .................................................. 73
Clear Voice ll................................................................. 74
Balance........................................................................... 75
CONTENTS
Audio Reset ....................................................................76
I/II
- Stereo/Dual Reception ....................................... 77
- NICAM Reception.............................................................. 78
- Speaker Sound Output Selection.................... 78
On-Screen Menu Language Selection......................... 79
TIME SETTING
Clock Setup .................................................................. 80
Auto On/ Off Timer Setting ..................................... 81
Sleep Timer Setting .................................................... 82
TELETEXT
Switch on/off................................................................ 83
SIMPLE Text .................................................................. 83
TOP Text........................................................................ 83
FASTEXT........................................................................ 84
Special Teletext Functions ........................................ 84
APPENDIX
Troubleshooting........................................................... 85
Maintenance ................................................................ 87
Product Specifications............................................... 88
IR Codes ........................................................................ 89
External Control Device Setup .................................90
3
PREPARATION
FRONT PANEL CONTROLS
This is a simplified representation of the front panel.
■ Here shown may be somewhat different from your TV.
Only 26LH2***
PREPARATION
MENU
INPUT
OK
VOLUME
PROGRAMME
POWER
INPUT MENU
OK
P
Only 32/37/42LH2***
P
PROGRAMME
VOLUME
OK
Remote Control Sensor
OK
MENU
MENU
INPUT
INPUT
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
4
BACK PANEL INFORMATION
Here shown may be somewhat different from your TV.
VIDEO
L(MONO) AUDIO
STEREO\
(8 )
ANTENNA
IN
12
1
3
2
4
5
RJP
INTERFACE
RS-232C IN
(CONTROL&SERVICE)
VIDEO
2
7
6
PREPARATION
VOLUME
CONTROL
R
USB IN
■
ANTENNA IN
L(MONO) AUDIO
R
AUDIO IN AUDIO
(RGB/DVI) OUT
VARIABLE AUDIO OUT
RGB IN (PC)
/DVI IN
1
AV IN
VIDEO
VIDEO
L(MONO)
L(
MONO) AUDIO
R
AUDIO
VIDEO
L(MONO) AUDIO
R
COMPONENT IN
VARIABLE AUDIO OUT
ANTENNA
IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
8
1
2
3
4
5
6
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
9
10
11
7
RJP INTERFACE
Connect control line (RJ45) for RJP(Remote Jack pack)
8
Component Input
Connect a component video/audio device to these
jacks.
9
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
10
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on this
jack
RGB Input
Connect the output from a PC.
11
Antenna Input
Connect RF antenna to this jack.
RGB/DVI Audio Input
Connect the audio from a PC.
12
USB IN Input
Connect USB storage device to this jack.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RS-232C IN PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio Output
Connect to the Home Theater.(or amp)
5
PREPARATION
STAND INSTALLATION
■ Here shown may be somewhat different from your TV.
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
PREPARATION
1
ATTACHING THE TV TO A
DESK
■ Here shown may be somewhat different from your TV.
The TV must be attached to desk so it cannot be pulled
in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached
screw.
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
1-Screw (provided as parts of the product)
2
Assemble the TV as shown.
Stand
Desk
3
Fix the 4 bolts securely using the holes in the
back of the TV.
NOT USING THE DESK-TYPE
STAND
■
Here shown may be somewhat different from your TV.
When installing the wall-mounted unit, use the protection cover.
! WARNING
G To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the
machine may cause injury.
HOW TO SECURE THE
POWER CABLE
Secure the power cable with the PROTECTIVE BRACKET and
the bolt as shown. It will help prevent the power cable from
being removed by accident.
Bolt
PROTECTIVE BRACKET
Insert the P R O T E C T I O N C O V E R into the TV until
clicking sound.
6
BACK COVER FOR WIRE
ARRANGEMENT
■
Here shown may be somewhat different from your TV.
SWIVEL STAND
■
This feature is not available for all models.
After installing the TV, you can adjust the TV manually
to the left or right direction by 20 degrees to suit your
viewing position.
■
Connect the cables as necessary.
To connect additional equipment, see the External
Equipment Setup section of the manual.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
PREPARATION
1
HOW TO USE DUAL LOCK™
(This feature is not available for all
models.)
Fix the set-top box to the TV and use it when you
want to.
1
After removing the protection paper from the
Dual Lock, stick it to the TV and the set-top
box as shown.
2
Attach the set-top box to the TV by pressing the
Velcro strips together.
CABLE MANAGEMENT CLIP
3
Fit the C A B L E M A N A G E M E N T C L I P as shown.
! NOTE
G
Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
7
PREPARATION
CAREFUL INSTALLATION ADVICE
A
A
You should purchase necessary components to fix the TV
safety and secure to the wall on the market.
A Position the TV close to the wall to avoid the possibility
of it falling when pushed.
A The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb or
hang from the TV.
The TV can be installed in various ways such as on
a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
A
EARTHING
PREPARATION
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
1
1
Circuit breaker
2
2
DESKTOP PEDESTALINSTALLATION
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on the
wall.
2
3
3
Use a sturdy rope to tie the product for alignment. It
is safer to tie the rope so it becomes horizontal
between the wall and the product.
! NOTE
G
G
G
8
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to
support the size and weight of the TV.
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
For adequate ventilation allow a clearance of 10cm
all around the TV.
10 cm
10 cm
10 cm
10 cm
WALL MOUNT: HORIZONTAL
INSTALLATION
! NOTE
Should Install wall mount on a solid wall perpendicular to
the floor.
G Should use a special wall mount, if you want to install it to
ceiling or slanted wall.
G The surface that wall mount is to be mounted on should be
of sufficient strength to support the weight of TV set; e.g.
concrete, natural rock, brick and hollow block.
G Installing screw type and length depends on the wall mount
used. Further information, refer to the instructions included
with the mount.
G LG is not liable for any accidents or damage to property or
TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause
TV to fall and cause personal injury.
- Not following the recommended Installation method.
G
■
This feature is not available for all models.
Here shown may be somewhat different from your TV.
The TV is equipped with a Kensington Security System
connector on the back panel. Connect the Kensington
Security System cable as shown below.
For the detailed installation and use of the Kensington
Security System, refer to the user’s guide provided
with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and
LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the TV feels cold to the touch, there may be a
small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time.
Doing so may produce some temporary distortion
effects on the screen.
10 cm
10 cm
10 cm
■
PREPARATION
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed
by a qualified professional installer.
A
KENSINGTON SECURITY SYSTEM
10 cm
10 cm
A
B
Model
42LH2***
37LH2***
32LH2***
26LH2***
VESA Standard Quantity
(A * B)
Screw
200 * 200 M6
4
200 * 200 M6
4
200 * 100 M4
4
200 * 100 M4
4
9
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■
■
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
PREPARATION
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
VIDEO
L(MONO) AUDIO
R
ANTENNA
IN
VIDEO
VARIABLE AUDIO OUT
L(MONO) AUDIO
ANTENNA IN
R
VARIABLE AUDIO OUT
RF Coaxial Wire (75 Ω)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
VIDEO
L(MONO) AUDIO
R
VARIABLE AUDIO OUT
Antenna
UHF
Signal
Amplifier
VHF
■
■
10
ANTENNA
IN
VIDEO
L(MONO) AUDIO
R
VARIABLE AUDIO OUT
ANTENNA
IN
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■
Here shown may be somewhat different from your TV.
HD RECEIVER SETUP
Connecting with a component cable
1
2
RGB IN (PC)
/DVI IN
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
1
AUDIO IN
(RGB/DVI)
A
VIDEO
VIDEO
AUDIO
COMPONENT IN
C
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t input source using the I N P U T
button on the remote control.
Signal
Component
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
1080p
S
1
2
EXTERNAL EQUIPMENT SETUP
2
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
HDMI
O
O
(50 / 60 Hz only)
(24 Hz / 30 Hz / 50 Hz / 60 Hz)
11
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
1
Connect the digital set-top box to H D M I / D V I I N 1
or H D M I 2 jack on the TV.
RS-232C IN
(CONTROL&SERVICE)
2
AUDIO I
(RGB/DV
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
12
/DVI IN
2
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
Select H D M I 1 or H D M I 2 input source using the
I N P U T button on the remote control.
1
Y
PB
PR
VIDEO
COMPONENT IN
1
! NOTE
G Check
that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
G We recommed less than 10m for HDMI cable, and recommend to use amplifier or repeater for more than that.
L
R
AUDIO
VIDEO
Connecting with an HDMI to DVI cable
Connect the digital set-top box to H D M I / D V I I N 1 jack on the TV.
2
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the
TV.
3
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4
Select H D M I 1 input source using the I N P U T button on the remote control.
RJP
INTERFACE
RS-232C IN
(CONTROL&SERVICE)
EXTERNAL EQUIPMENT SETUP
1
2
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
/DVI IN
1
AV IN
Y
PB
PR
VIDEO
L
R
VIDEO
L(MONO) AUDIO
R
AUDIO
COMPONENT IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
1
2
13
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a component cable
1
RS-232C IN
(CONTROL&SERVICE)
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
RGB IN (PC)
/DVI IN
EXTERNAL EQUIPMENT SETUP
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t input source using the I N P U T
button on the remote control.
5
Refer to the DVD player's manual for operating instructions.
1
A
VIDEO
VIDEO
AUDIO
COMPONENT IN
V
C
S
1
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
14
AUDIO IN
(RGB/DVI)
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Connecting the HDMI cable
1
RS-232C IN
(CONTROL&SERVICE)
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 or H D M I 2 jack on the TV.
2
/DVI IN
Select H D M I 1 or H D M I 2 input source using the
I N P U T button on the remote control.
Y
PB
PR
VIDEO
L
R
VIDEO
AUDIO
COMPONENT IN
3
Refer to the DVD player's manual for operating instructions.
1
EXTERNAL EQUIPMENT SETUP
2
AUDIO
(RGB/D
RGB IN (PC)
1
! NOTE
G The
TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the
latest cables that support at least HDMI version 1.3.
G We recommed less than 10m for HDMI cable, and recommend to use amplifier or repeater for more than
that.
15
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
RJP
INTERFACE
RS-232C IN
(CONTROL&SERVICE)
2
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
EXTERNAL EQUIPMENT SETUP
16
/DVI IN
1
AV IN
Y
PB
PR
VIDEO
L
R
VIDEO
L(MONO) AUDIO
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
R
1
AUDIO
COMPONENT IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
Wall Jack
2
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Connecting with a RCA cable
1
2
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
AV IN
L
R
VIDEO
/MONO
ENT IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
Select A V input source using the I N P U T button on the
remote control.
1
! NOTE
G
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
S-VIDEO
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
EXTERNAL EQUIPMENT SETUP
3
AUDIO
AUDIO
ANT OUT
17
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
RJP
INTERFACE
RS-232C IN
(CONTROL&SERVICE)
2
Video Game Set
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
1
/DVI IN
AV IN
IN
EXTERNAL EQUIPMENT SETUP
18
Y
PB
PR
VIDEO
L
COMPONENT IN
R
VIDEO
/MONO
AUDIO
AUDIO
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
VIDEO
L
R
1
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V input source with using the I N P U T button on the remote control.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
USB IN SETUP
Here shown may differ from your TV.
USB IN
■
1
Connect the USB device to the U S B I N jack on the TV.
2
After connecting the U S B I N jacks, you use the U S B function. (G p .46)
EXTERNAL EQUIPMENT SETUP
1
SPEAKER OUTPUT SETUP
/DVI IN
AV IN
VIDEO
L(MONO) AUDIO
R
COMPONENT IN
VOLUME STEREO
CONTROL (8 )
ANTENNA
IN
SPEAKER OUT
1
LEFT
UP
Control port for Speaker out
DOWN
RIGHT
1
Connect the external speaker to the SPEAKER OUTPUT(STEREO) jack on the TV.
19
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC
adjusts automatically to the TV's settings.
RJP
INTERFAC
RS-232C IN
(CONTROL&SERVICE)
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
Connecting with a D-sub 15 pin cable
AV IN
1
EXTERNAL EQUIPMENT SETUP
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
PB
PR
VIDEO
L
R
L(MONO) AUDIO
R
COMPONENT IN
VOLUME
CONTROL
STEREO\
(8 )
SPEAKER OU
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
Turn on the TV and the PC.
4
Select R G B input source using the I N P U T button on
the remote control.
1
RGB OUTPUT
20
VIDEO
AUDIO
2
AUDIO
Supported Display Resolution
HDMI-DTV mode
RGB-PC mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
720x400
640x480
800x600
1024x768
1280x768
1360x768
1280x1024
1920x1080
31.468
31.469
31.469
37.879
48.363
47.776
47.720
63.668
66.587
70.09
70.09
59.94
60.317
60.004
59.87
59.799
59.895
59.934
720x480
31.47
31.50
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.75
33.72
28.125
60.00
59.94
50.00
1920x1080p
67.432
67.5
56.250
27
33.75
59.94
60
50
24
30
Only 32/37LH220H, 42LH2***
EXTERNAL EQUIPMENT SETUP
Resolution
! NOTE
Avoid keeping a fixed image on the TV ’s screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate
or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G If the resolution of PC is over SXGA, there will
be no picture on the TV.(only HD Models)
G
Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
We
recommend using 1360x768, 60Hz (Only
G
32/37LH220H, 42LH2*** : 1920X1080) for
the PC mode, these should provide the best
picture quality.
HDMI
mode supports PCM audio format only.
G
G If the Audio setting is set to
Dolby/DTS/Bitstream in some DVDP/STB, make
sure to change the setting to PCM.
G
21
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still
not correct, your TV is functioning properly but needs further adjustment.
Screen
PICTURE
Move
• Contrast
Prev.
Resolution
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
Move
OK
E
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase.
The displayed image will be unstable for a few seconds while the auto configuration is in progress.
0
Auto Config. G
To Set
Position
Yes
R
G
No
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB(PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run A u t o C o n f i g ..
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
22
Screen Reset
Returns Position, Size and Phase to the factory default settings.
PICTURE
Move
Screen
OK
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
Prev.
Resolution
E
• Contrast
Move
0
Auto Config.
Position
To Set
R
G
Yes
Size
No
• Advanced Control
• Picture Reset
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC], Component(except 480i, 576i).
Phase
Screen
Screen
Reset
1 MENU
2
G
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
OK
Select Y e s.
3
4
5
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
23
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
Screen
PICTURE
Move
• Contrast
Prev.
Resolution
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
Move
OK
E
EXTERNAL EQUIPMENT SETUP
P o s i t i o n operates in Component(except 480i, 576i), RGB mode.
S i z e, P h a s e operate only in RGB mode.
0
Auto Config.
D
Position
G
F
G
E
R
Size
G
• Advanced Control
Phase
• Picture Reset
Screen
Screen
1 MENU
Reset
Select P I C T U R E.
2
OK
Select S c r e e n.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
24
Selecting Resolution
This function works in the following mode: RGB[PC]
Screen
PICTURE
Move
Resolution
E
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
0
Move
Prev.
OK
G
Auto Config.
1024 x 768
1280 x 768
1360 x 768
Position
R
G
EXTERNAL EQUIPMENT SETUP
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
25
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
RATIO Selects your desired picture format.
RATIO
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 4 5)
POWER
AV
V MODE
ENERGY SAVING
AV MODE
ENERGY SAVING
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
ENERGY Adjust the energy saving mode of the TV.
SAVING
WATCHING TV / PROGRAMME CONTROL
0 to 9 number Selects a programme.
button Selects numbered items in a menu.
Q.VIEW
LIST
Q.VIEW
LIST
viewed programme.
Q.VIEW Returns to the previously
table.
LIST Displays the programme MUTE
MUTE
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
MENU
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
RETURN
Coloured These buttons are used for teletext (on T E L E T E X T modbuttons els only) , P r o g r a m m e e d i t.
MARK
FAV
1
Q.MENU
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 8 3)
MARK/FAV Displays the selected favourite programme.
26
RATIO
POWER
AV
V MODE
ENERGY SAVING
VOLUME UP Adjusts the volume.
/DOWN
AV MODE
ENERGY SAVING
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
Q.VIEW
LIST
MUTE
LIST
Q.VIEW
SIMPLINK Controls SIMPLINK menu.MUTE
Menu
control buttons
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 4 0)
MENU
RETURN
WATCHING TV / PROGRAMME CONTROL
PAGE Move from one full set of screen information to the next
UP/DOWN one.
Q. MENU Select the desired quick menu source.(Aspect Ratio, Clear
Voice II, Picture Mode, Sound Mode, AUDIO, Sleep Timer,
Favourite, USB Device) (G p . 2 9)
MARK
FAV
Q.MENU
Installing Batteries
■
Loose the bolt on battery compartment cover.
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries with
new ones.
■
Close cover.
27
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly and check the main power on the TV.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the r / I, INPUT or P D E button on the TV or press the POWER,
INPUT, P
or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, A u t o T u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
PROGRAMME SELECTION
1
Press the P
or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
28
+ or - , AV Mode button.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• A s p e c t R a t i o: Selects your desired picture format.
• A U D I O : Selects the sound output.
• S l e e p T i m e r : Sets the sleep timer.
• F a v o u r i t e : Selects the favourite On or Off.
• U S B D e v i c e : Selects “Eject” in order to eject USB
For Zoom Setting, select 16:9, Original, 4:3, 14:9,
Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to
Q.Menu.
• C l e a r V o i c e l l : By differentiating the human sound
range from others, it helps users listen to human voices better.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set the
sound combination which it deems the best for the
images being watched. Selects your desired Sound
Mode.
device.
Aspect Ratio
F
16:9
G
Zoom Setting
Clear Voice ll
3
Picture Mode
Vivid
Sound Mode
Standard
AUDIO
PR
MONO
Sleep Timer
Off
Favourite
Off
USB Device
WATCHING TV / PROGRAMME CONTROL
Q.Menu
Eject
Close
1Q. MENU
Display each menu.
2
Select your desired Source.
3
OK
• Press the Q . M E N U button to return to normal TV viewing.
29
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
■
Here shown may be somewhat different from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
SETUP
Move
OK
Auto Tuning
PICTURE
Move
OK
Aspect Ratio : 16:9
AUDIO
Move
Auto Volume
Manual Tuning
Energy Saving
Programme Edit
Picture Mode : Vivid
: Off
Clear Voice ll
: Off
• Level
• Backlight
100
Balance
• Contrast
100
Sound Mode
WATCHING TV / PROGRAMME CONTROL
TIME
Move
OK
0
-
+
0
L
R
: Standard
• Brightness
50
• SRS TruSurround XT : Off
• Sharpness
70
• Treble
50
• Colour
70
• Bass
50
E
Clock
E
SETUP
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Menu Language
OK
: Off
Move
: English
OK
USB
Move
OK
Photo List
Music List
Off Time
: Off
Input Label
On Time
: Off
SIMPLINK
: On
Movie List
Sleep Timer
: Off
Key Lock
: Off
DivX Reg. Code
Set ID
:1
Deactivation
Power Indicator
Demo Mode
: Off
Factory Reset
1 MENU
2
OK
Display each menu.
Select a menu item.
3
OK
Move to the pop up menu.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
30
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
SETUP
Move
OK
SETUP
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
OK
Check your antenna connection. The previous channel
information will be updated during Auto Tuning.
Yes
1 MENU
Select S E T U P.
No
• If you wish to keep on auto tuning select Y e s
using the
button. Then, press the OK button. Otherwise select N o.
2
OK
Select A u t o T u n i n g.
OK
Select Y e s.
3
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Move
4
OK
Run A u t o T u n i n g.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
31
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
OK
SETUP
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Move
OK
Storage
F
System
1
G
BG
Band
V/UHF
WATCHING TV / PROGRAMME CONTROL
Channel
0
Fine
F G
Search
F G
Name
C 02
Store
Close
1 MENU
5
Select V / U H F or C a b l e.
Select S E T U P.
2
OK
Select M a n u a l T u n i n g.
6
or
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
3
OK
or
1
2
3
4
5
6
7
8
9
Select the desired programme number on.
0
4
7
Commence searching.
8
OK
Select a TV system.
Select S t o r e.
9
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• B G : PAL B/G, SECAM B/G (Asia / New Zealand / M.East / Africa)
I : PAL I/II (Hong Kong / South Africa)
D K : PAL D/K, SECAM D/K (China / Africa)
M : Philippines
• To store another channel, repeat steps 3 to 9.
32
SETUP
Move
SETUP
OK
Move
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
OK
Storage
F
System
1
G
BG
Band
V/UHF
Channel
0
Fine
F G
Search
F G
Name
C 02
Store
Close
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
2
OK
3
Select S E T U P.
4
OK
Select M a n u a l T u n i n g.
5
OK
OK
OK
Select the position and make
your choice of the second character, and so on.
You can use an the alphabet A
to Z , the number 0 to 9 , +/ , and blank.
Select S t o r e.
Select N a m e.
6
OK
A
WATCHING TV / PROGRAMME CONTROL
A
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1 MENU
2
OK
Select S E T U P.
Select M a n u a l T u n i n g.
4
Fine tune for the best picture and sound.
5
OK
Select S t o r e.
6
3
OK
OK
Select F i n e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
33
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
WATCHING TV / PROGRAMME CONTROL
1
SETUP
Move
C 01
OK
TV
0
1 C 01
Auto Tuning
2 C 05
3 BLN 2
Manual Tuning
4
5
Programme Edit
6
7
8
9
10
11
12
13
14
15
E
Pr. Change
Delete
1 MENU
Navigation
P
Page Change
Move
Previous
Skip
Select S E T U P.
2
OK
Select P r o g r a m m e E d i t.
3
OK
Enter the P r o g r a m m e E d i t.
4
Select a programme to be stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
34
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
Deleting a programme
A
1
Select a programme number to be deleted.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one position.
2
RED Turn the deleted programme number to RED.
RED Release the deleted programme.
Moving a programme
A
1
Select a programme number to be moved.
2
YELLOW
Turn the moved programme number to YELLOW.
3
YELLOW Release the moved programme.
A
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to BLUE.
3
Release the skipped programme.
WATCHING TV / PROGRAMME CONTROL
3
• When a programme number is skipped it means
that you will be unable to select it using the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER
buttons or select it in the programme edit.
35
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
1 C 01
2 C 05
3 BLN 2
WATCHING TV / PROGRAMME CONTROL
Exit
A
Displaying programme list
1
LIST
A
Display the Programme List.
• You may find some blue programmes. These
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
Select a programme.
2
A
OK
Paging through a programme list
1
P
36
Switch to the chosen programme number.
P
A
G
E
2
Turn the pages.
LIST
Return to normal TV viewing.
FAVOURITE PROGRAMME SETUP
A
Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without
having to wait for the TV to scan through all the in-between programmes.
To tune to a favorite programme, press the F A V(Favorite)button repeatedly.
Q.Menu
Aspect Ratio
1
16:9
P
Zoom Setting
Vivid
Sound Mode
Standard
AUDIO
Favourite
2
3
4
5
6
7
8
9
2 Q. MENU
Select your desired
programme.
Select F a v o u r i t e.
MONO
Sleep Timer
PR
1
Off
F
Favourite
3
G
Select F a v o u r i t e.
USB Device
Eject
4 Q. MENU
Close
Return to TV viewing.
• This will automatically include the selected programme into your favourite programme list.
A
Displaying the favourite programme list
1 MARK
Favorite List
1 C 01
FAV
WATCHING TV / PROGRAMME CONTROL
Picture Mode
or
0
3
Clear Voice ll
P
A
G
E
Display the Favourite Programme List.
2 C 05
3 BLN 2
Exit
37
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
■
Here shown may be somewhat different from your TV.
1
OK
INPUT
Select the input source.
WATCHING TV / PROGRAMME CONTROL
TV
AV
Component
HDMI2
HDMI1
RGB
• T V : Select it when watching the TV.
• A V : Select it when watching the VCR or external equipment.
• C o m p o n e n t : Select it when using DVD or Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD or Digital set-top box depend on connector.
38
INPUT LABEL
Selects a label for each input source.
OPTION
Menu Language
Move
: English
Input Label
Menu Language
Input Label
Move
OK
: English
AV
SIMPLINK
Component
: On
Key Lock
: Off
Key Lock
: Off
RGB
Set ID
:1
Set ID
:1
HDMI1
Power Indicator
Demo Mode
Power Indicator
: Off
Factory Reset
Demo Mode
Factory Reset
F
G
HDMI2
: Off
Close
WATCHING TV / PROGRAMME CONTROL
2
OPTION
: On
SIMPLINK
1 MENU
OK
Select OPTION.
OK
Select Input Label.
OK
Select the source.
3
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
39
WATCHING TV / PROGRAMME CONTROL
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
O f f”.
If you do not want SIMPLINK menu,select “O
OPTION
WATCHING TV / PROGRAMME CONTROL
Menu Language
Move
OPTION
OK
: English
Menu Language
Input Label
Move
Input Label
SIMPLINK
SIMPLINK
On
:: On
SIMPLINK
SIMPLINK
On
:: On
Off
Key Lock
: Off
Key Lock
: Off
On
On
Set ID
:1
Set ID
:1
Power Indicator
Demo Mode
OK
: English
Power Indicator
: Off
Demo Mode
Factory Reset
1 MENU
: Off
Factory Reset
3
Select O P T I O N.
OK
Select O n or O f f.
4
2
OK
Select S I M P L I N K.
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn
on mode.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics
Control).
40
Connecting to Home Theater with the SIMPLINK logo.
Connect the H D M I / D V I I N 1 or H D M I I N 2 terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
1
RJP
INTERFACE
RS-232C IN
(CONTROL)
2
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
/DVI IN
1
AV IN
Y
PB
PR
VIDEO
L
R
VIDEO
L(MONO) AUDIO
R
AUDIO
COMPONENT IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
Connect the Audio output terminal on the back of the
TV and the Audio input terminal of the Home Theater
using RCA cables.
2
G
2
Home Theater
When you select or operate a media device with home theater
function, the speaker automatically switches to home theater
speaker (HT speaker).
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMI
terminal) of the SIMPLINK device with the HDMI cable.
G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a
device controlled by SIMPLINK.
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker to
operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is set
to the TV volume.
G
WATCHING TV / PROGRAMME CONTROL
Select Home Theater in the Speaker menu by pushing the
S I M P L I N K button.
3
1
41
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Menu
Press the
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
3
WATCHING TV / PROGRAMME CONTROL
42
button and then OK button to select the desired SIMPLINK source.
V C R p l a y b a c k : Play and control the connected
VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
5
Audio Out to Home theater/Audio Out to TV:
Select Home theater or TV speaker for Audio Out.
1
2
Selected Device
3
When device is not connected (displayed in gray)
4
When a device is connected
(displayed in bright colour)
5
F G
Change Device
OK
KEY LOCK
The TV can be set so that the remote control is required to control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Menu Language
Move
: English
OPTION
Menu Language
Move
: On
SIMPLINK
Key Lock
: Off
Key Lock
Off: Off
: On
Set ID
:1
Set ID
On
On: 1
Power Indicator
Power Indicator
: Off
Factory Reset
Demo Mode
: Off
Factory Reset
Select O P T I O N.
O n’, if the TV is turned off, press the r / I,
• In K e y L o c k ‘O
OK
Select K e y L o c k.
INPUT, P D or E button on the TV or POWER, INPUT, P
or NUMBER buttons on the remote control then the
set will be turned on.
Key Lock On
• With the K e y L o c k O n, the display ‘
’ appears on the screen if any button on the front panel is
pressed while viewing the TV.
OK
Select O n or O f f.
2
3
4
OK
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
Demo Mode
OK
: English
Input Label
Input Label
1 MENU
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
Use to quickly reset all the menu options to their original factory preset values.
This function deletes all TV programmes.
When the F a c t o r y R e s e t is completed, you must restart the Initializing setup.
OPTION
Menu Language
Move
OK
: English
OK
WATCHING TV / PROGRAMME CONTROL
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
: 1 All user settings and channel
settings will be reset.
Still Continue?
: Off
Demo Mode
Power Indicator
: Off
Factory Reset
Reset
Factory
Demo Mode
Factory
Factory Reset
Reset
Yes
No
Select O P T I O N.
OK
Select F a c t o r y R e s e t.
OK
Select Y e s.
3
Move
: English
SIMPLINK
Power Indicator
2
Menu Language
Input Label
Input Label
1 MENU
OPTION
4
OK
Start F a c t o r y R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
44
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
2
OK
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to
select the desired source.
• If you select C i n e m a in AV mode, C i n e m a will be
selected both for P i c t u r e M o d e and S o u n d
M o d e in P I C T U R E menu and A U D I O menu
respectively.
O f f” in A V m o d e, the picture and
• If you select “O
image which you initially set will be selected.
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
• Press the R E T U R N button to return to normal TV viewing.
45
TO USE A USB DEVICE
WHEN CONNECTING THE USB DEVICE
When you connect a USB device, this pop up menu is displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
■ Here shown may be somewhat different from your TV.
1 Connect the USB device to the U S B
I N jack
on the TV.
USB IN
• This TV Supports on JPEG, MP3 and SD Divx.
USB memory stick
Select the USB device menu before removing the
USB device.
2
TO USE A USB DEVICE
46
When removing the USB device
Select P H O T O L I S T, M U S I C L I S T or
M O V I E L I S T.
PHOTO LIST
MUSIC LIST
MOVIE LIST
1Q. MENU
2
OK
3
OK
Select Eject.
Precautions when using the USB device
Only a USB storage device is recognizable.
G If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When
such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music files, image files or movie files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with the
Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may not
be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by
USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's
responsibility and in consequence the manufactures does not cover the product bearing data damage.
G Maximum of 999 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
G Up to 128 English characters can be recognized as a file name.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G TV need more time to detect if the storage size is bigger.
G If the USB memory is connected in Standby Mode, power on time would be longer than without memory.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to
make it work properly.
G When using a USB HDD via the USB extension cable, connect a support electric power source.
G
TO USE A USB DEVICE
47
TO USE A USB DEVICE
PHOTO LIST
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: Min : 64 x 64
MAX : 15360 x 8640
• Not support to progressive Jpeg
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
Screen Components
1 MENU
2
TO USE A USB DEVICE
Select U S B.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
PHOTO LIST
Corresponding buttons on the
remote control
1
No Marked
Up Folder
Up Folder
Navigation
3
Page 2/3
Drive1
JMJ001
1366x768, 125KB
OPTION
4
48
Select PHOTO LIST.
OK
KY103
12/10/2009
KY101
12/10/2009
KY104
12/10/2009
KY102
12/10/2009
KY105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
MARK
Mark
Exit
Photo Selection and PopUp Menu
PHOTO LIST
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
Navigation
OPTION
Page 2/3
Drive1
12/10/2009
12/10/2009
KR104
12/10/2009
KR102
12/10/2009
KR105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
MARK
KR101
1366x768, 125KB
Up Folder
OPTION
Mark
Exit
No Marked
Up Folder
JMJ001
1
KR103
KR101
12/10/2009
KR103
12/10/2009
KR104
12/10/2009
1366x768, 125KB
KR102
12/10/2009
JMJ001
12/10/2009
View
Mark All
KR105
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Delete
Close
Page Change
MARK
Mark
Exit
G
View : Display the selected item.
Mark All : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
TO USE A USB DEVICE
PHOTO LIST
Navigation
No Marked
Up Folder
Select the target folder or drive.
• Use the P
2
3
4
OK
OK
Select the desired photos.
Show the PopUp menu.
OK
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show of
the marked photos. If no photos are marked, you
can view all photos individually or all photos in
the folder in a slide show.
Select the desired PopUp menu.
49
TO USE A USB DEVICE
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
PHOTO LIST
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
Navigation
OPTION
TO USE A USB DEVICE
PHOTO LIST
Page 2/3
Drive1
JMJ001
KR103
12/10/2009
KR101
12/10/2009
KR104
12/10/2009
KR102
12/10/2009
KR105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
MARK
Up Folder
OPTION
Mark
Exit
No Marked
Up Folder
1366x768, 125KB
Navigation
No Marked
Up Folder
KR101
12/10/2009
KR102
12/10/2009
JMJ001
12/10/2009
JMJ002
12/10/2009
JMJ003
12/10/2009
JMJ004
12/10/2009
KR103
12/10/2009
KR104
12/10/2009
1366x768,KR105
125KB
12/10/2009
View
JMJ005
12/10/2009
Mark All
JMJ006
12/10/2009
JMJ007
12/10/2009
JMJ008
12/10/2009
Delete
Close
Page Change
MARK
Mark
1/17
Exit
BGM
Delete
Option
Hide
The aspect ratio of a photo may change the size of the
photo displayed on the screen in full size.
Press the R E T U R N button to move to the previou menu screen.
1
Select the target folder or drive.
2
OK
Select the desired photos.
3
OK
Show the PopUp menu.
4
Select V i e w.
5
OK
50
Slideshow
The selected photo is displayed in full size.
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e.
(Rotate),
• Use
1/17
Slideshow
BGM
Delete
Option
Hide
button to select the previous or
next photo.
• Use
button to select and control the
menu on the full-sized screen.
S l i d e s h o w : When no picture is selected, all photos in
the current folder are displayed during slide show. When selected,
the selected photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n.
G
■
TO USE A USB DEVICE
G
( R o t a t e ) : Rotate photos.
Rotates the photo 90°, 180°, 270°, 360° clockwise.
G
D e l e t e : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d and M u s i c F o l d e r.
■ Use
button and O K button to set values. Then go
to OK and press O K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval
between slides.
Slide Speed
Fast
Music Folder
Music
OK
G
Cancel
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button to display.
51
TO USE A USB DEVICE
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
MUSIC (*.MP3) supporting file
Bit rate : 32k to 320kbps
Sampling rate MPEG1 layer 3: 32k to 48kHz
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
MUSIC LIST
Select MUSIC LIST.
3
Page 2/3
No Marked
Music
Title
Duration
Up Folder
Corresponding buttons on the
remote control
00:00 / 1:34
1
Up Folder
Navigation
OPTION
4
52
Page Change
MARK
Mark
Exit
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
MUSIC LIST
Page 2/3
No Marked
Music
Duration
Title
00:00 / 1:34
Up Folder
Navigation
OPTION
Page 2/3
MARK
Mark
Exit
No Marked
Music
Duration
Title
Up Folder
4395KB, 1Kbps
Play
Play with Photo
Mark All
00:00 / 1:34
Delete
Close
Up Folder
Navigation
1
2
3
4
OPTION
Page Change
MARK
Mark
Exit
Select the target folder or drive.
Select the desired music title.
OK
OK
Show the PopUp menu.
OK
TO USE A USB DEVICE
MUSIC LIST
Page Change
P l a y (During stop) : Play the selected music
titles.
Once a music finished playing, the next selected
one will be played. When there are no selected
music titles to play, the next one in the current
folder will be played.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected
one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
Up Folder
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in the
folder will be played in sequence.
Select the desired PopUp menu.
53
TO USE A USB DEVICE
TO USE A USB DEVICE
54
■
If you don't press any button for a while during the playing, the play information box (as shown in
the below) will float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a
extended period of time.
! NOTE
When music is playing,
is displayed in back of the music title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G This TV can not play music files less than 32 Kbytes.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
Supports up to four drives.
TO USE A USB DEVICE
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1 , MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.xx , DivX 4.xx,
DivX 5.xx , DivX VOD ( DRM ), XviD, Divx 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital, AC3
Sampling frequency : 32k to 48kHz
Bit rate : 32k to 320kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Max bitrate of playable DivX file is 6Mbps.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30 FPS
(720*480) depending on Resolution.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• Files of 25 FPS or 30 FPS of higher may not be played properly.
• If the file is recorded with GMC, the unit supports only 1 point of recorded level.
(GMC is the acronym for Global Motion Compensation, a technique used to compensate MPEG Video files.)
• A video file name and its subtitle file name must be identical for it to be displayed.
• A DivX movie file and its subtitle file must be located in the same folder.
• Use the left/right (
/ ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly for some files while playing a movie.)
• Playing a video via a USB connection that does not support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
File
Extension name
mpg, mpeg, mpe, vob, dat
Avi, divx, m4v
Video Decodec
Audio Codec
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx,
Divx 5.xx, Divx 6.xx(Playback), Xvid
AC3,MPEG,MP3,PCM
Resolution
720x576@25p
720x480@30p
55
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
Select MOVIE LIST.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked
movies
4
MOVIE LIST
3
Page 2/3
Movie
SJS001
No Marked
Title
Duration
Up Folder
Corresponding buttons on
the remote control
KR1
KR2
1366x768, 125KB
1
Up Folder
Navigation
SJS001
00:00:00
SJS002
00:00:00
SJS003
00:00:00
OPTION
Page Change
MARK
Mark
Exit
4
Movie Selection and PopUp Menu
TO USE A USB DEVICE
As shown, up to 6 movie titles are listed per page.
MOVIE LIST
Page 2/3
No Marked
Movie
Duration
Title
SJS001
Up Folder
KR1
KR2
1366x768, 125KB
Up Folder
Navigation
SJS001
00:00:00
SJS002
00:00:00
OPTION
MOVIE LIST
Page 2/3
Page Change
Exit
Duration
Title
1366x768, 125KB
Up Folder
1366x768, 125KB
OPTION
KR2
Play
SJS001
Mark All
Delete
SJS002
00:00:00
00:00:00
Close
00:00:00
SJS003
Page Change
MARK
Mark
Exit
3
1
2
Mark
Up Folder
KR1
Navigation
MARK
No Marked
Movie
SJS001
P l a y : Play the selected movie titles. Divx Play
is executed while screen changes.
G P l a y M a r k e d : Play the selected movie titles.
Once a music finishes playing, the next selected
one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing movie titles.
G M a r k A l l : Mark all movie titles in the folder.
G U n m a r k A l l : Deselect all marked movie titles.
G D e l e t e : Delete the selected movie titles.
G C l o s e : Close the pop-up menu.
G
00:00:00
SJS003
Select the target folder or drive.
4
OK
Select the desired movie.
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
• In the case of files not supported, amessage
regarding non-supported file is displayed.
56
DivX Audio Language & Subtitle Language
Picture Size
F
Full Screen
Subtitle Language
---
Audio Language
1/1
Subtitle File
---
. Language
Latin 1
. Sync
0
. Position
---
G
language
OK
1
2
French, Spanish, Catalan Basque, portuguese, Italian, Albanian,
Rhaeto-Romanic, Dutch, German, Danish, Swedish, Norwegian,
Finnish, Faroese, Icelandic, Irish, Scottish, English
Latin2
Czech, Hungarian, Ploish, Romanian, Croatian, Slovak,
Slovenian, Sorvian
Latin4
Estonian, the Baltic languages Latvian(Lettish) and Lithuanian,
Greenlandic and Lappish
Latin5
English, Trukish
Cyrillic
Bulgarian, Byelorussian, Macedonian, Russian, Serbian and
pre-1990 (no ghe with upturn) Ukrainian
Greek
English, modern Greek
Hebrew
English, modern Hebrew
Chinese
Chinese
Thai
Thai
Arabic
English, Arabic
• When DivX is playing, if you press the
R E D button, this message is displayed.
Select P i c t u r e S i z e , S u b t i t l e
Language,
Audio
Language,
S u b t i t l e F i l e , L a n g u a g e , S y n c or
P o s i t i o n.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
TO USE A USB DEVICE
Select the desired option.
Latin1
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG > GGGGGG.
■
II
During playback, press the P a u s e ( I I) button.
■ Still screen is displayed.
■
P L A Y ( G)
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y( G) button to return to normal playback.
57
TO USE A USB DEVICE
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivX Reg.
Reg. Code
Code
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Deactivation
Move
OK
DivX(R) Video On Demand
Your registration code is : XXXXXXXXXX
To learn more visit www.divx.com/vod
Close
1 MENU
Select U S B.
TO USE A USB DEVICE
2
OK
Select D i v X R e g . C o d e.
• Press the M E N U button to return to normal TV viewing.
3
Display D i v X R e g . C o d e.
OK
• Press the R E T U R N button to move to the previous menu screen.
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
“DivX Certified to play DivX video, including premium content”
ABOUT DIVX VIDEO : DivX® is a digital video format created by DixX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information
and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified® device must be registered in
order to play DivX Video-on-Demand[VOD] content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
! NOTE
Supported movie file
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
G Video
58
Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx,
DivX5.xx, DivX VOD(DRM), XviD.
G When loading, some buttons may not work.
G If you use the DivX registration code of another device, the rented or purchased DivX file cannot be played.
Therefore always use the DivX registration code assigned to this product.
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
OK
USB
Move
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Deactivation
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
Select U S B.
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code : XXXXXXXX
TO learn more visit www.divx.com/vod.
Close
TO USE A USB DEVICE
1 MENU
No
OK
2
OK
Select D e a c t i v a t i o n.
OK
Select Y e s.
3
4
OK
59
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 1 6 : 9, J u s t S c a n, O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m and
Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the
screen and remain visible.
1Q. MENU
Select A s p e c t R a t i o.
2
T U R E menu.
• For Zoom Setting, select 1 4 : 9, Z o o m and
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
C i n e m a Z o o m in Q.Menu or select C i n e m a
Z o o m in PICTURE menu.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
60
• You can also adjust A s p e c t R a t i o in the P I C -
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, black bars will appear
on both the left and right of the screen.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed
in the same way as in 4:3, but is magnified to the left and
right.
• Cinema Zoom
Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended
and vertically cropped. The picture adopting a
compromise between alteration and screen
coverage.
The adjustment range is 1-16.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
PICTURE CONTROL
! NOTE
G
G
G
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m , C i n e m a Z o o m in Component, HDMI mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB mode only.
In HDMI/Component (over 720p) mode, J u s t S c a n is available.
61
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption by adjusting backlight level.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to
be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.
PICTURE
Move
OK
PICTURE
Move
Aspect Ratio : 16:9
Energy
Saving : :Off
Off
Energy
Saving
Aspect Ratio : 16:9
Picture Mode : Vivid
Picture Mode : Vivid
Energy
Saving
Energy
Saving
: Off
• Backlight
100
• Backlight
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
OK
Off
Off
Minimum
100
Medium
100
Maximum
50
Screen Off
70
70
E
E
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select
OK
Select O f f, M i n i m u m, M e d i u m, M a x i m u m or S c r e e n O f f.
E n e r g y S a v i n g.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• When selecting Screen Off, the screen will be turned off after 3 seconds. In this case, if you want turn the
screen on, press any key on the set or the remote control.
• If you adjust “EE n e r g y S a v i n g - M i n i m u m, M e d i u m, M a x i m u m”, B a c k l i g h t feature will not work.
• You can also adjust E n e r g y S a v i n g button.
62
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid
Standard
Natural
Cinema
Sport
Game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general and natural screen display status.
The most natural screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Move
PICTURE
OK
OK
Aspect Ratio : 16:9
Aspect Ratio : 16:9
Energy Saving
Energy Saving
: Off
: Off
Picture Mode : Standard
Vivid
Picture Mode : Standard
Vivid
• Backlight
100
• Backlight
• Contrast
100
• Contrast
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
E
Vivid
Vivid
Standard
100
Natural
100
Cinema
50
Sport
70
Game
70
Expert1
Expert2
Select P I C T U R E.
• P i c t u r e M o d e adjusts the TV for the best pic-
2
OK
Select P i c t u r e M o d e.
OK
Select V i v i d, S t a n d a r d, N a t u r a l,
C i n e m a, S p o r t or G a m e.
3
PICTURE CONTROL
• Brightness
E
1 MENU
Move
ture appearance. Select the preset value in the
P i c t u r e M o d e menu based on the programme
category.
• You can also adjust P i c t u r e M o d e in the
Q . M e n u.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
63
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
• Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
• Contrast
Adjusts the difference between light and dark levels in the picture. You may use Contrast when the bright part
of the picture is saturated.
• Brightness
Increases or decreases the amount of white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
• Colour
Adjusts intensity of all colours.
• Tint
Adjusts the balance between red and green levels.
PICTURE
Move
PICTURE
OK
Aspect Ratio : 16:9
Energy Saving
: Off
PICTURE CONTROL
Picture Mode : Standard
Vivid
• Backlight
100
• Backlight
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
Natural
Cinema
100
Sport
100
Game
50
Expert1
70
Expert2
70
E
E
1 MENU
• Benefits of using Backlight
- The electricity consumption is reduced by up to 60%.
- The black brightness is reduced. (As the black has
greater depth, you can enjoy a better quality definition.)
- You can adjust brightness with maintaining original
signal resolution.
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
OK
Select V i v i d, S t a n d a r d, N a t u r a l,
C i n e m a, S p o r t or G a m e.
4
OK
Standard
Energy Saving
: Off
Picture Mode : Standard
Vivid
3
Move
Vivid
Vivid
Aspect Ratio : 16:9
Select B a c k l i g h t, C o n t r a s t, B r i g h t n e s s,
S h a r p n e s s, C o l o u r or T i n t.
OK
5
Make appropriate adjustments.
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
64
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
you can set the video value differently for each input.
To reset to the factory default screen after making adjustment to each video mode, execute the “Reset” function for
each Picture Mode.
■
Here shown may be somewhat different from your TV.
PICTURE
Move
PICTURE
OK
Move
E
70
• Colour
70
• ColourNoise Reduction
70
• Contrast
OK
E
• Sharpness
Colour Temperature
• Contrast
100
Dynamic Contrast
• Brightness
50
Dynamic Colour
• Sharpness
70
100
• Brightness
• Tint
50
R
• Tint
G
Gamma
R
• Advanced Control
• Advanced
BlackControl
Level
• Picture Reset
• Picture Reset
Eye Care
Screen
Screen
F
Cool
G
High
High
Medium
G
Medium
Auto
Off
Film Mode
Off
Colour Gamut
Wide
Close
1 MENU
PICTURE CONTROL
E
Select P I C T U R E.
2
OK
3
OK
4
Select A d v a n c e d C o n t r o l.
Select C o l o u r T e m p e r a t u r e, D y n a m i c C o n t r a s t, D y n a m i c C o l o u r, N o i s e R e d u c t i o n,
G a m m a, B l a c k L e v e l, E y e C a r e, F i l m M o d e, C o l o u r G a m u t or E d g e E n h a n c e r . (Refer
to p.67 to 68)
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
65
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
As the detail item for video quality experts to adjust the video precisely using specific videos, this may not be
effective for general videos.
Move
OK
PICTURE
Energy Saving
: Off
Picture Mode
Mode :: Vivid
Expert1
Picture
Expert1
Expert1
F
Noise Reduction
• Brightness
50
Gamma
• H Sharpness 70
• V Sharpness 70Black Level
Aspect Ratio : 16:9
• Backlight
100
Vivid
• Contrast
100
Standard
• Brightness
50
Cinema
• Sharpness
70
Sport
• Colour
70
E Game
Dynamic Contrast
Move
OK
E
PICTURE
• Colour
Expert Control
Control
•• Expert
• Picture Reset
Screen
G
Low
Auto
70Film Mode
• Tint
Off
Low
Off
Colour Standard
SD
Colour Gamut
Standard
Edge Enhancer
High
Colour Gamut
Wide
E
Expert2
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
OK
Select E x p e r t 1 or E x p e r t 2.
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
3
4
5
6
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
66
*This feature is not available for all models.
Colour Temperature
(Warm/Medium/Cool)
■
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colours so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look more
vivid.
Noise Reduction
(Off/Low/Medium/High)
■
Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
■
You can adjust brightness of dark area and middle gray level area of the picture.
• L o w : Make dark and middle gray level area of the picture brighter.
• M e d i u m: Express original picture levels.
• H i g h: Make dark and middle gray level area of the picture darker.
Dynamic Contrast
(Off/Low/Medium/High)
Dynamic Colour
(Off/Low/High )
Black Level
(Low/High)
■
■
Eye Care
(On/Off)
Film Mode
(On/Off)
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
*This feature is not available for all models.
■ Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.
■ This feature is disable in “P
P i c t u r e M o d e-V
V i v i d, C i n e m a”.
■
■
■
PICTURE CONTROL
• L o w : The picture of the screen gets darker.
• H i g h : The picture of the screen gets brighter.
• A u t o : Realizing the black level of the screen and set it to High or Low automatically.
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
This function can work when TruMotion is off.
67
PICTURE CONTROL
• S t a n d a r d : Mode to reproduce original colour according to the standard of input
Colour Gamut
(Wide/Standard)
signal independent of the display characteristics.
• W i d e : Mode to use and set the rich colour area of the display.
■ Maximize the utilization for colour area that can be expressed.
■
Shows clearer and distinctive yet natural corners of the video.
■
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
This feature is enabled in “Picture Mode - Expert1/2”.
Edge Enhancer
(Off/Low/High)
Colour Standard
(SD/HD)
■
■
Colour Filter
(Off/Red/Green/Blue)
■
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
This feature is enabled in “Picture Mode - Expert1/2”.
This is the function to adjust the overall colour of the screen to the feeling you want.
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 to +50.
■ This feature is enabled in “Picture Mode - Expert1/2”.
■
White Balance
(Medium/Warm/Cool)
PICTURE CONTROL
68
Colour Management
System
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range is
-30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 to +30.
■ This feature is disable in RGB-PC mode.
■ This feature is enabled in “Picture Mode - Expert1/2”.
■
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
• Contrast
PICTURE
OK
Move
100
• Contrast
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
70
i
R
• Colour
70
Resetting
video configuration...
• Tint
G
• Advanced Control
G
• Picture Reset
• Picture Reset
Screen
Select P I C T U R E.
2
OK
R
• Advanced Control
Screen
1 MENU
100
• Brightness
• Tint
OK
Select P i c t u r e R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
POWER INDICATOR
OPTION
Menu Language
Move
OPTION
OK
: English
Move
Menu Language
Input Label
OK
: English
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
Indicator
Power
Demo Mode
PICTURE CONTROL
It helps you adjust the brightness of moving LED and sound when power is turned on.
Standby Light
Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode.
Power Light
Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on.
Power Indicator
Indicator
Power
: Off
Demo Mode
Factory Reset
Standby Light
: Off
F
Power Light
Off
G
On
Factory Reset
Close
1 MENU
3
Select O P T I O N.
2
OK
Select S t a n d b y L i g h t or P o w e r
L i g h t.
4
OK
Select P o w e r I n d i c a t o r.
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
69
PICTURE CONTROL
DEMO MODE
Display the slide show to explain the various logo of this TV.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Menu Language
Move
OPTION
OK
: English
Menu Language
Input Label
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Demo
DemoMode
Mode
OK
Input Label
SIMPLINK
Power Indicator
Power Indicator
:: Off
Off
DemoMode
Mode
Demo
Factory Reset
PICTURE CONTROL
1 MENU
Move
: English
Off
Off
:: Off
On
On
Factory Reset
Select OPTION.
2
OK
Select Demo Mode.
OK
Select O n to show the various logo of TV.
3
4
OK
Return to TV viewing.
If you want to stop the demo, press any button.
+ , - button)
(except MUTE,
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
70
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the
channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for
each programme.
AUDIO
Move
On
:: Off
AutoVolume
Volume
Auto
On
:: Off
Clear Voice ll
: Off
Clear Voice ll
: Off
• Level
Sound Mode
0
-
+
0
L
R
: Standard
• Level
Balance
Sound Mode
OK
Off
On
On
0
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
E
Select A U D I O.
OK
Select A u t o V o l u m e.
OK
Select O n or O f f.
SOUND & LANGUAGE CONTROL
2
Move
AutoVolume
Volume
Auto
Balance
1 MENU
AUDIO
OK
3
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
71
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the
frequency of the equalizer.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume
OK
AUDIO
: Off
Clear Voice ll
: Off
• Level
Balance
Sound
Sound Mode
Mode
-
+
0
L
R
: Standard
Standard
: Off
• Level
Balance
Sound
Sound Mode
Mode
0
-
0
L
: Standard
Standard
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
+
R
Standard
Standard
Music
• SRS TruSurround XT : Off
SOUND & LANGUAGE CONTROL
Select A U D I O.
OK
: Off
Clear Voice ll
0
E
1 MENU
Move
Auto Volume
Cinema
Sport
Game
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
3
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
72
SOUND SETTING ADJUSTMENT -USER MODE
Move
Clear Voice ll
Balance
-
+
0
L
R
Balance
Sound Mode
50
• Bass
50
OK
+
L
R
Off
Close
4
Select A U D I O.
OK
Select T r e b l e, B a s s.
OK
Make appropriate adjustments.
5
Select S o u n d M o d e.
3
OK
-
: Standard • SRS TruSurround XT
• SRS TruSurround XT : Off
50
Treble • Treble
50
••Treble
50
• Bass50
50
• Bass
E
E
2
0
0
E
• Treble
: Off
• Level
Standard (User)
: Standard
OK
: Off
Clear Voice ll
0
• SRS TruSurround XT : Off
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
Mode
Sound
AUDIO
OK
: Off
E
AUDIO
Auto Volume
Select S t a n d a r d , M u s i c , C i n e m a ,
S p o r t or G a m e.
6
OK
• Press the R E T U R N button to move to the previous menu screen.
SRS TRUSURROUND XT
Select this option to sound realistic.
1 MENU
2
• S R S T r u S u r r o u n d X T : TruSurround XT is a
Select A U D I O.
OK
Select S R S T r u S u r r o u n d X T.
OK
Select O n or O f f.
patented SRS technology that solves the problem of playing 5.1 multichannel content over
two speakers.
SOUND & LANGUAGE CONTROL
• Press the M E N U button to return to normal TV viewing.
3
4
OK
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
73
SOUND & LANGUAGE CONTROL
CLEAR VOICE ll
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Auto Volume
Clear Voice ll
Auto Volume
: Off
• Level
Balance
Sound Mode
AUDIO
OK
: Off
Clear Voice ll
0
-
+
0
L
R
: Standard
Move
: Off
Off
Off
: Off
• Level On
Balance
Sound Mode
0
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Select A U D I O.
OK
E
O n” for C l e a r V o i c e I I, S R S
• If you select “O
T r u S u r r o u n d X T feature will not work.
2
OK
Select C l e a r V o i c e I I.
OK
Select O n or O f f.
3
SOUND & LANGUAGE CONTROL
Adjustment for Clear Voice Level With selecting On
4
OK
Select L e v e l.
OK
Make appropriate adjustments.
• Select levels from ‘-6’ to ’+6’.
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
74
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
Clear Voice ll
Balance
-
+
0
L
R
: Off
• Level
0
Balance
Sound Mode
: Standard
OK
: Off
Clear Voice ll
0
-
0 L
• Balance
+
0 F RL
R
G
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
AUDIO
OK
: Off
Close
E
Select A U D I O.
2
OK
Select B a l a n c e.
OK
Make desired adjustment.
3
SOUND & LANGUAGE CONTROL
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
75
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
E
: Off
• Level
Balance
Sound Mode
E
Clear Voice II
Clear Voice II
0
-
+
0
L
R
: Standard
SOUND & LANGUAGE CONTROL
OK
• Level
0
0
i
-
+
L
R
: Standard
Resetting
soundXTmode
: Off configuration...
• SRS TruSurround
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
2
: Off
Balance
Sound Mode
• SRS TruSurround XT : Off
1 MENU
OK
• Reset
Select A U D I O.
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
76
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number and
station name.
1Q. MENU
Select A u d i o.
2
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
SOUND & LANGUAGE CONTROL
Stereo
77
SOUND & LANGUAGE CONTROL
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
SOUND & LANGUAGE CONTROL
78
1
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
2
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M
D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent
to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
ON-SCREEN MENU LANGUAGE SELECTION
The installation setup menu appears on the TV screen when it is switched on for the first time.
1
OK
Select your desired language.
* If you want to change Language selection
1
MENU
Select O P T I O N.
2
Select M e n u L a n g u a g e.
OK
Select your desired language.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
OK
! NOTE
G
If you do not finish the set-up I n s t a l l a t i o n S e t u p by pressing R E T U R N or if you time out on the OSD
(On Screen Display) the installation menu will continuously appear until the set up is completed whenever
the TV is switched on.
79
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset the clock.
TIME
Move
TIME
OK
Clock
Clock
1 MENU
Move
OK
Clock
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Hour
F
Minute
10
G
09
Close
Select T I M E.
2
OK
Select C l o c k.
OK
Select either the Hour or Minute option.
3
TIME SETTING
4
Set the Hour or Minute options.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
80
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
Clock
Off Time
11 : 23
Clock
F
: Off
Off Time
On Time
Time
On
Off
:: Off
On Time
Time
On
Off
:: Off
Sleep Timer
: Off
Sleep Timer
: Off
: Off
Off
Hour
00
Minute
00
Programme
1
Volume
30
G
Close
1 MENU
2
OK
Select T I M E.
Select O f f T i m e or O n T i m e.
TIME SETTING
When the O n T i m e is selected,
3
OK
Select H o u r, M i n u t e,
P r o g r a m m e or V o l u m e.
4
Set the Hour, Minute, Programme, Volume.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
81
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
Select S l e e p T i m e r.
2
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
TIME SETTING
82
TELETEXT
RATIO
This feature is not available in all countries.
SLEEP
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute
information on news, weather, television programmes, share prices and many other
topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
SIMPLE (standard teletext) consists of a number of pages which are selected by
directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
RATIO
POWER
AV
V MODE
ENERGY SAVING
A
Q.VIEW
LIST
MUTE
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page viewed appears
on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline.
The first page number indicates your selection, while the second shows the current page
displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
MENU
RETURN
FAV
Q.MENU
MARK
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press
a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes
the next group and the blue field indicates the next block.
A
Block / group / page selection
1
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
2
3
4
A
TELETEXT
TOP TEXT
Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
83
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
i
A Index
Select the each index page.
Text Option
Index
Time
A Time
TELETEXT
When viewing a TV programme, press this button to display the time at the top right
hand corner of the screen. Press this button again to remove the display. In the teletext
mode, press this button to select a sub page number. The sub page number is displayed
at the bottom of the screen. To hold or change the sub page, press the RED/GREEN,
P /
or NUMBER buttons.
Press again to exit this function.
Hold
Reveal
Update
Close
A Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive. To continue press this button again.
?
A Reveal
Press this button to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
A Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top
left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button again to view the updated teletext page.
84
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A
The remote control
does not work
Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A The TV goes into Standby mode automatically if no signal is received or no
operation is performed for 15 minutes.
A
Power is suddenly
turned off
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A
No picture & No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
A
Check for local interference such as an electrical appliance or power tool.
APPENDIX
Horizontal/vertical bars
or picture shaking
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display
can result. Please use the latest cables that support at least HDMI version 1.3.
85
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
Unusual sound from
inside the TV
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
A
Check HDMI cable over version 1.3.
No sound when
connecting HDMI
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
APPENDIX
86
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to
wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A Do not to use a wet cloth.
A
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord
to protect against possible damage from lightning or power surges.
APPENDIX
87
APPENDIX
PRODUCT SPECIFICATIONS
26LH2***
32LH2***
37LH2***
42LH2***
26LH200C - TA
26LH210C - TA
26LH220C - TA
32LH200C - TA
32LH210C - TA
32LH220C - TA
32LH220H - TA
37LH200C - TA
37LH210C - TA
37LH220C - TA
37LH220H - TA
42LH200C - TA
42LH210C - TA
42LH220C - TA
42LH220H - TA
with stand
667.0 mm x 504.0 mm x
224.0 mm
805.0 mm x 583.0 mm x
224.0 mm
922.0 mm x 659.0 mm x
297.0 mm
1028.0 mm x 715.4 mm x
297.0 mm
without stand
667.0 mm x 446.2 mm x
80.0 mm
805.0 mm x 528.0 mm x
79.9 mm
922.0 mm x 595 mm x
88.0 mm
1028.0 mm x 655.0 mm x
88.7 mm
8.9 kg
7.8 kg
11.5 kg
10.3 kg
14.8 kg
13.0 kg
18.0 kg
16.2 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Dimensions
(Width x Height x Depth)
Weight
with stand
without stand
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1 to E21, UHF: E21 to E69, CATV: S1 to S20, HYPER: S21 to S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
Supported movie files
■
APPENDIX
88
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
75 Ω
0 to 40 °C
Less than 80%
-20 to 60 °C
Less than 85%
Refer to p. 55
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
Code (Hexa)
08
0B
79
45
43
1E
07
06
40
41
44
28
95
30
02
03
00
01
09
10 to19
53
1A
72
71
63
61
20
21
7E
71
63
61
21
8E
Function
POWER
INPUT
RATIO
Q.MENU
MENU
MARK/FAV
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN
Energy Saving
AV MODE
+
P /PAGE
P /PAGE
MUTE
Number Key 0 to 9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.Option
SIMPLINK
A Stop
G Play
l l Pause
FF Rew
GG FF
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
APPENDIX
89
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V
control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the product back panel.
Note
■ RS-232C connection cables are not supplied with the product.
■ In USB mode, it doesn’t support RS-232C function.
RS-232C IN
(CONTROL&SERVICE)
RJP
INTERFACE
2
AUDIO IN AUDIO
(RGB/DVI) OUT
RGB IN (PC)
/DVI IN
1
AV IN
Y
L
R
VIDEO
L(MONO) AUDIO
R
AUDIO
APPENDIX
COMPONENT IN
VOLUME
CONTROL
STEREO\
(8 )
ANTENNA
IN
SPEAKER OUT
Type of Connector: D-Sub 9-Pin Male
1
6
90
PB
PR
VIDEO
5
9
No.
1
2
3
4
5
6, 8
7
9
Signal
VCC
RX RS232
TX RS232
IR from TV
GND
Not connected
+5V
+12V
Signal requirements
Standard RS232 specification
Standard RS232 specification
Power ground
1A 5VDC 10%, max 100mV ripple
1A 12VDC 10%, max 100mV ripple
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .95
OPTION
Menu Language
Move
OK
: English
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: OffF
Set ID
ID
Set
:1
:1
Set ID
ID
Set
:1
:1
Demo Mode
3
OK
OK
Demo Mode
1
G
Close
Power Indicator
Off
Factory Reset
OK
Move
: English
SIMPLINK
Power Indicator
2
Menu Language
Input Label
Input Label
1 MENU
OPTION
Off
Factory Reset
Select O P T I O N.
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1to 99.
APPENDIX
• Press R E T U R N to move to the previous menu screen.
91
APPENDIX
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
Stop bit : 1 bit
A Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 to 01
02. Aspect Ratio
k
c
Refer to p.93
03. Screen Mute
k
d
04. Volume Mute
k
e
05. Volume Control
k
f
COMMAND1 COMMAND2
DATA
(Hexadecimal)
13. Balance
k
t
00 to 64
14. Colour Temperature
k
u
00 to 02
Refer to p.93
15. Abnormal Status
k
z
FF
00 to 01
16. Auto Configure
j
u
01
00 to 64
17. Channel Add/Del
m
b
00 to 01
06. Contrast
k
g
00 to 64
18. Key
m
c
Key Code
07. Brightness
k
h
00 to 64
19. Input select (Main)
x
b
Refer to p.95
08. Colour
k
i
00 to 64
20. Control Back Light
m
g
00 to 64
09. Tint
k
j
00 to 64
21. Energy Saving
j
q
Refer to p.95
10. Sharpness
k
k
00 to 64
22. Tune Command
m
a
Refer to p.96
11. OSD Select
k
k
l
m
00 to 01
23. Treble
k
r
00 to 64
00 to 01
24. Bass
k
s
00 to 64
12. Remote Control Lock
/Key Lock Mode
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j,k,m or x)
[Command 2] : Second command to control the set.
APPENDIX
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected TV is
controlled. Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0x0 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
92
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data
read mode, it indicates present status data. If the data is data
write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this format
when receiving abnormal data form non-viable functions or
communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will send the ‘a’, ‘b’.
[NG]: use the large character.
0 5 . Volume Control (Command: k f)
0 1 . Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Refer to ‘Real data mapping 1 ’. See page 95.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and ack
message during power on sequence, It should be
described like “Note: In this model, TV will send the
Acknowledge after power on processing completion.
There might be a time delay between command and
acknowledge.”
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom
Data 06: Original
Data 07: 14:9
Data 09: Just Scan
Data 10 to 1f: Cinema Zoom
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p) mode, J u s t
S c a n is available.
0 3 . Screen Mute (Command: k d)
To select screen mute on/off.
Data 00 : Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Data 00 : Video Mute off
Data 10 : Video Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Refer to ‘Real data mapping 1’. See page 95.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Refer to ‘Real data mapping 1’. See page 95.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Refer to ‘Real data mapping 1’. See page 95.
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 95.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
93
APPENDIX
10. Sharpness (Command: k k)
15. Abnormal State (Command: k z)
To adjust the screen sharpness.
To recognize an abnormal state.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data FF: Read
Data Min: 00 to Max: 64
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Refer to ‘Real data mapping 1’. See page 95.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
12. Remote Control Lock/Key Lock Mode (Command: k m)
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
16 . Auto Configure (Command: j u)
To lock the remote control and the front panel
To adjust picture position and minimize image
controls on the set.
shaking automatically. It works only in RGB (PC)
mode.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
* When main power is on/off, remote control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
APPENDIX
To adjust balance.
You can also adjust balance in the AUDIO menu.
17. Channel Skip(Command: m b)
To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
Data Min: 00 to Max: 64
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
01 : Add
Refer to ‘Real data mapping 1’. See page 95.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: k u)
To adjust colour temperature.
You can also adjust Colour Temperature in the PICTURE
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
94
18. K e y (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 89.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
2 0 . C o n t r o l B a c k L i g h t (C o m m a n d : m g )
19. Input select (Command: x b)
(Main Picture Input)
To select input source for TV.
To Control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 to Max: 64
( * transmit by Hexadecimal code)
Data: Structure
MSB
0
LSB
0
0
0
External Input
0
0
0
0
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Input Number
External Input
Data
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
2 1 . E n e r g y S a v i n g (C o m m a n d : j q )
To reduce the power consumption of the TV. You can also
adjust Energy Saving in OPTION menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data Min: 00H to Max: 05H
Data 00 : Off
01 : Minimum
02 : Medium
03 : Maximum
05 : Screen Off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
A : Step 10
APPENDIX
* Real data mapping 1
00 : Step 0
F : Step 15
10 : Step 16
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
FE : Step 254
FF : Step 255
95
APPENDIX
22 . Tune Command / Channel Tuning (Command: m a)
Tune Channel to following Physical number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data0 : 00
Data1: Min: 00 to Max: C7
* Refer to ‘Real data mapping 1’ See page 95.
Data2: 00
Acknowledgement [a][ ][Set ID][OK][ ][Data0][Data1][x]
[a][ ][Set ID][NG][ ][Data0][x]
23. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’ See page 95.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
2 4 . Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping 1’ See page 95.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
96
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
Model :
Serial No. :
Download PDF