LG | E2281VR-BN | LG E2381VR-BN Owner’s Manual

ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODEL
E2281TR
E2281VR
E2381VR
www.lg.com
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is
connected and that the outlet is easily accessible.
Operate the display only from a power source indicated in the specifications of this
manual or listed on the display. If you are not sure what type of power supply you
have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your
service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal (Only , Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Owner's Manual/Cards
15-pin D-Sub Signal Cable
Power Cord
(Depending on the country)
AC-DC adapter
DVI-D Signal Cable
(This feature is not available in
all countries.)
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
-After installation, adjust the angle as shown below.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚ to 15˚
-5˚
15˚
IMPORTANT
It is recommended that in order to maintain an ergonomic and
comfortable viewing position, the forward tilt angle of the monitor should
not exceed 5 degrees.
Do not touch or press the screen when adjusting the angle of the monitor.
5
Connecting the Display
E2281TR
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
and power cord
of the signal cable.
A Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
2. Connect signal input cable 1
2
in order, then tighten the screw
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
Wall-outlet type
DVI-D (This feature is not
available in all countries.)
When using a D-Sub signal input cable
connector for Macintosh
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) Dsub VGA connector on the supplied cable
to a 15 pin 2 row connector.
6
Connecting the Display
E2281TR
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
7
Connecting the Display
E2281VR/E2381VR
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
and power cord 2 in order, then tighten the screw
of the signal cable.
A Connect DVI-D(Digital signal) Cable
C Connect HDMI Cable
B Connect D-sub(Analog signal) Cable
2. Connect signal input cable 1
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
Wall-outlet type
DVI-D (This feature is not
available in all countries.)
Headphone/Speaker
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
When using a D-Sub signal input cable
connector for Macintosh
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) Dsub VGA connector on the supplied cable
to a 15 pin 2 row connector.
8
Connecting the Display
E2281VR/E2381VR
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
9
Control Panel Functions
Front Panel Controls
E2281TR/E2281VR/E2381VR
E2281VR/E2381VR (Only for HDMI input)
10
Control Panel Functions
MENU Button
Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
SUPER+
RESOLUTION
Button
For more information, refer to page 22 to 23.
SUPER ENERGY Use this button to enter SUPER ENERGY SAVING
SAVING Button menu.For more information, refer to page 24 to 26.
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO button on the MONITOR SETUP OSD. (Only
Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1920 x 1080
VOLUME Button To adjust the volume of headphone/speaker.
(Only for HDMI input)
11
Control Panel Functions
INPUT Button
Use this button to select source from input.
(SOURCE Hot key)
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.
EXIT Button
Exit the OSD(On Screen Display).
Power Button &
Power Indicator
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is red.
12
On Screen Display (OSD) Control Adjustment
E2281TR
Screen Adjustment
Making adjustments to the image size and operating parameters of
the display is quick and easy with the On Screen Display Control
system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
1
Press the discretionary Button, then the main menu of the OSD appears.
2
To access a control, use the corresponding Buttons.
3
Use the
Use the
4
Press the EXIT Button to exit from the OSD.
/ /
Buttons to adjust the image to the desired level.
Button to select other upper menu items.
13
On Screen Display (OSD) Control Adjustment
E2281VR/E2381VR
Screen Adjustment
Making adjustments to the image size and operating parameters of
the display is quick and easy with the On Screen Display Control
system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
HIGH
1
Press the discretionary Button, then the main menu of the OSD appears.
2
To access a control, use the corresponding Buttons.
3
Use the
Use the
4
Press the EXIT Button to exit from the OSD.
/ /
Buttons to adjust the image to the desired level.
Button to select other upper menu items.
14
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
DSUB : D-SUB(Analog signal) input
DVI-D : DVI-D(Digital signal) input
HDMI : HDMI signal
Main menu
MENU
Sub-menu
Supported input
BRIGHTNESS
DVI-D
To adjust the brightness of the
screen
HDMI
To adjust the image size
DSUB
ORIGINAL RATIO
To customize the color of the
screen
COLOR PRESET
(WARM/MEDIUM/COOL)
BLACK LEVEL
HDMI
To adjust the black level of the
screen
LANGUAGE
SOUND
DSUB
To customize the screen status
for a user's operating
environment
DVI-D
HDMI
FACTORY RESET
SUPER+
RESOLUTION
SUPER
ENERGY
SAVING
Description
NORMAL
LOW
MEDIUM
HIGH
D-SUB
DVI-D
HDMI
DSUB
ON
DVI-D
The image is inevitably damaged
during the date processing to
enlarge the image. SUPER+
RESOLUTION can maintain the
resolution to show the clear video
image even with the enlargement
with the picture quality
improvement technology that
adjusts the blurred focus and
rough outline due to the
enlargement.
Turn on the SUPER ENERGY
SAVING function.
HDMI
OFF
Turn off the SUPER ENERGY
SAVING function.
RESET
Initialize the SUPER ENERGY
SAVING and set to "OFF" mode.
VOLUME
HDMI
To adjust the volume
NOTE
The order of icons may differ depending on the model (15 to 26).
15
On Screen Display(OSD) Selection and Adjustment
E2281TR
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu
Name
Submenus
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
16
On Screen Display(OSD) Selection and Adjustment
E2281VR/E2381VR
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu
Name
Submenus
HIGH
Move to the upper menu
Adjust (Decrease/Increase)
Select another sub-menu
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
17
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
E2281TR
To adjust the brightness of the screen.
E2281VR/E2381VR
HIGH
E2281TR
WIDE
Switch to full screen mode according to
input image signal.
ORIGINAL
Change the input image signal ratio to
original.
* This function works only if input
resolution is lower than monitor ratio
(16:9).
E2281VR/E2381VR
HIGH
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit : Exit
18
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PRESET
E2281TR
WARM
Set the screen to warm color
temperature .
MEDIUM
Set the screen to medium
color temperature.
COOL
Set the screen to cool color
temperature.
3
E2281VR/E2381VR
3
HIGH
(Only HDMI input)
You can set the offset level. If you
select 'HIGH', the screen will be bright
and if you select ‘LOW’, the screen
will be dark. (only for HDMI input)
* Offset? As the criteria for video
signal, it is the darkest screen the
monitor can show.
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit : Exit
19
On Screen Display(OSD) Selection and Adjustment
Main menu
Description
E2281TR
To choose the language in which the
control names are displayed.
7
E2281VR/E2381VR
HIGH
7
SOUND
E2281TR
To select or turn off the Buzzer sound.
The Buzzer sound operates in below
cases:
• DC power On/Off
• AC power On
• Monitor Setup OSD On/Off
• Menu OSD On/Off
• Super Energy Saving OSD On/Off
• Super+ Resolution OSD On/Off
E2281VR/E2381VR
HIGH
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit : Exit
20
On Screen Display(OSD) Selection and Adjustment
Main menu
Description
E2281TR
Restore all factory default settings except
"LANGUAGE."
Press the ,
buttons to reset
immediately.
E2281VR/E2381VR
HIGH
: Move to the upper menu
: Decrease
: Increase
: Select another sub-menu
Exit : Exit
21
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SUPER+ RESOLUTION Button, then the main menu of the OSD appears.
Menu
Name
Submenus
Move to the upper menu
Move
Exit
Button
Tip
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
22
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
NORMAL
Select this when you want to use the
product in the most general using
environment. In the General mode, the
SUPER+ RESOLUTION is turned off.
LOW
When the user wants a natural video
screen with soft image, it helps to get the
optimized screen. It is effective for video
with small movement or still image.
MEDIUM
When the user wants a comfortable
video screen at the medium level
between low and high mode, it helps to
get the optimized screen. It is effective
for UCC and SD level videos.
HIGH
When the user wants a sharp video
screen with clear images, it helps to get
the optimized screen. It is effective for
high resolution video screens and
games.
: Move to the upper menu
: Move
EXIT : Exit
,
* Noise may exist according to SR(SUPER+ RESOLUTION) Mode, so enjoy the clear image by selecting
SR(SUPER+ RESOLUTION) Mode according to the Contents.
23
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the
OSD system. Listed below are the icons, icon names, and icon descriptions of the
all items shown on the Menu.
Press the SUPER ENERGY SAVING Button, then the main menu of the OSD appears.
Menu
Name
Submenus
Icons
Restart to select sub-menu
Move
Button
Tip
Exit
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
24
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
ON
Turn on the SUPER ENERGY
SAVING fuction.
When current setting value is
ON,the SUPER SAVING color is
green.
OFF
Turn off the SUPER ENERGY
SAVING function.Now the monitor
is LED SAVING function.
When current setting value is
OFF,the SUPER SAVING color is
gray.
RESET
Clear the TOTAL POWER
REDUCTION and TOTAL CO2
REDUCTION values.
: Move to the upper menu
: Move
EXIT : Exit
OK : Select
TOTAL POWER REDUCTION : How much power is saved during using the monitor.
TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2.
,
25
On Screen Display(OSD) Selection and Adjustment
NOTE
SAVING DATA(W/h):
22 inch 23 inch
SUPER SAVING
LED SAVING
4
5
15
12
Saving Data depends on the Panel. So,those values should be different from
each panel and panel vendor.
LG accumulate those values using integrated function with 10 minutes
broadcast video signal.
LED Saving means that how much power can be saved using WLED Panel
instead of CCFL panel.
SUPER Saving means that how much power can be more saved using
SUPER ENERGY SAVING function.
26
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power indicator
red?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
27
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO button to automatically adjust
your display image to the ideal setting.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the resolution
were changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred
and the screen may be dimmed, truncated or biased. Make sure to select the recommend
resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
28
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
The Audio function is not working
● Picture OK & No sound.
• Check whether volume is "0".
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
29
Specifications
E2281TR
Display
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 54.6 cm
0.248 mm x 0.248 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
30 kHz to 83 kHz (Automatic)
56 Hz to 75 Hz (Automatic)
Separate Sync.
Digital
Video Input
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution
Max
Recommend
VESA 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Plug&Play
DDC 2B(Analog,Digital)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
26 W (Typ.)
0.5 W
0.5 W
:
≤
≤
Width 51.4 cm (20.24 inch)
Height 38.83 cm (15.29 inch)
Depth 15.81 cm (6.22 inch)
Weight(excl. packing)
2.8 kg (6.17 lb)
Range
Tilt : -5˚ to 15˚
Power Input
19 V
AC-DC Adapter
Type EADP-40LB B, manufactured by Delta Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached ( O ), Detached (
Power cord
Wall-outlet type
2.1 A
)
NOTE
Information in this document is subject to change without notice.
30
Specifications
E2281VR
Display
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 54.6 cm
0.248 mm x 0.248 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
HDMI(TYPE-A) Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Plug&Play
DDC 2B(Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Video Input
Signal Input
30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync.
Digital
:
≤
≤
26 W (Typ.)
0.5 W
0.5 W
Width 51.4 cm (20.24 inch)
Height 38.83 cm (15.29 inch)
Depth 15.81 cm (6.22 inch)
Weight(excl. packing)
2.8 kg (6.17 lb)
Range
Tilt : -5˚ to 15˚
Power Input
19 V
AC-DC Adapter
Type EADP-40LB B, manufactured by Delta Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached ( O ), Detached (
Power cord
Wall-outlet type
2.1 A
)
NOTE
Information in this document is subject to change without notice.
31
Specifications
E2381VR
Display
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 58.4 cm
0.265 mm x 0.265 mm (Pixel pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
HDMI(TYPE-A) Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution
Max
Recommend
VESA 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Plug&Play
DDC 2B(Analog, Digital, HDMI)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Video Input
Signal Input
30 kHz to 83 kHz (Automatic)
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync.
Digital
30 W (Typ.)
0.5 W
0.5 W
:
≤
≤
Width 54.86 cm (21.60 inch)
Height 40.81 cm (16.07 inch)
Depth 15.81 cm (6.22 inch)
Weight(excl. packing)
3.1 kg (6.83 lb)
Range
Tilt : -5˚ to 15˚
Power Input
19 V
AC-DC Adapter
Type EADP-40LB B, manufactured by Delta Electronics
Environment
al Conditions
Operating Conditions
Temperature
10 ˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20 ˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached ( O ), Detached (
Power cord
Wall-outlet type
2.1 A
)
NOTE
Information in this document is subject to change without notice.
32
Specifications
Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT
E2281TR/E2281VR/E2381VR
Display Modes (Resolution) Horizontal Freq. (kHz)
1
2
3
4
5
6
7
8
9
10
11
*12
Vertical Freq. (Hz) Polarity(H/V)
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
70
60
75
60
75
60
75
75
60
75
60
60
-/+
-/-/+/+
+/+
-/+/+
+/+
+/+
+/+
-/+
+/+
*Recommend Mode
HDMI Video Input
E2281VR/E2381VR
Display Modes (Resolution)
1
2
3
4
5
6
7
8
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60
50
50
60
50
60
50
60
480P
576P
720P
720P
1080i
1080i
1080P
1080P
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Blue
Red
Off
33
Make sure to read the Important Precautions
before using the product.
Ke e p t h e O w n e r ’ s M a n u a l (C D ) i n a n
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S. Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc.
has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Download PDF