LG | FLATRON-LCD-295LM-LM295B-RA | LG FLATRON LCD 295LM(LM295B-RA) Owner’s Manual

The FLATRON LCD 295LM Flat Panel Monitor has
an
active matrix TFT
(Thin-Film Transistor) LCD (Liquid Crystal Display).
Features
The FLATRON LCD 295LM is
a
22-inch (55.8cm viewable)
intelligent micro-
processor based monitor.
This monitor
can
be connected to
a
VCR
or
DVD. The monitor has two
signal
(D-sub and DVI-D) so that it can support both an existing analog
input (D-sub) and an advanced standard digital input (DVI-D). Two computers
connectors
can
be
simultaneously used while connected
picture-in-picture function
using a computer.
This monitor has
VCR/DVD while
a
to this monitor.
so
that you
can
watch from
The aspect ratio of the monitor is 16:10 so that you can feel as if you are
watching a film in a theater. You can also simultaneously display two pages of
document set to
an
A4 size
on
the monitor,
so
that
working efficiency
can
a
be
improved.
This monitor
provides
an
audio function.
detachable and attachable.
They
can
Speakers that are included are easily
placed in desired positions.
also be
Digitally controlled auto-scanning is done with the micro-processor for horizontal
frequencies between 30 and 94kHz, and vertical scan frequencies
scan
between 56
-
85Hz.
USB (Universal Serial Bus) ports at the back of the monitor are prepared for the
USB cable and hub. You can easily and flexibly connect USB-designed devicessuch
as a mouse,
keyboard
or
printer- to the monitor for true Plug and Play
function.
We
accomplished to adapt the advanced design and technology to the monitor.
on the front panel are simple and allow you to conveniently
a
of
adjust variety image controls.
Soft touch buttons
This monitor has DDC 2B function.*
Compliant with
-
-
the
following regulated specifications
:*
EPA ENERGY STAR
Swedish TCO' 95
*For detailed information, please refer to
the Reference Guide provided
.
Description
of Controls
Front Panel Controls
Remote Control Sensor
SET Button
MENU Button
MENU
SOURCE
DOWN/UP
VOLUME
Power Button
SET
SOURCE Selection
DOWN/UP
Button
(
)
VOLUME
Control
SOURCE
(
)
Power Indicator
Buttons
Buttons
Function
SOURCE Selection
Button
Use this button to select
SOURCE
input signal.
an
DOWN/UP
SET
INPUT SELECT
?
DVI
DSUB
V1
V2
DIGITAL
ANALOG
?
(AV)
(S)
?
?
MENU
DOWN/UP
VOLUME
MENU Button
DOWN/UP
Buttons
VOLUME
Buttons
)
SET Button
:
or
exit the
Use these buttons to choose
or
on screen
adjust items
display.
in the
on screen
display.
)
?
Use these buttons to choose
screen
?
SET
DVI
digital signal
15-pin D-sub analog signal
V1(AV): Composite video
V2(S): S video
:
D-SUB ANALOG
Use this button to enter
(
(
DVI DIGITAL
or
adjust items in the on
display.
Use these buttons to decrease
or
increase volume level.
Use this button to enter a selection in the
on screen
display.
Power Indicator
The power indicator light is shown in the power button.
This indicator lights up green when the monitor operates
normally. If the monitor is in DPM (Energy Saving)
(stand-by/ suspend/power off), this indicator color
changes to amber.
Power Button
Use this button to turn the monitor
A2
on or
off.
mode
Description
of Controls
Rear Panel Controls
Connected to another
object
(stand type and wall-mounted
type optional)
--
USB
DC15V
upstream port
ANT
D
USB downstream
Locking
slot
connected to
can
Rear Cover
most
Composite
Input
DC Power Connector
be
Video
D-sub Connector
a locking cable that
purchased separately at
computer
Output
Jack
Headphone/Earphone
Output Jack
DC15V
D
S-Video
Video
Sound
IN
LR
PC Audio Audio
IN
LR
PC Sound
S-Video
Input
Jack
DVI-D Connector
Sound(L/R) Input
A3
stores.
Speaker(L/R)
Jack
Input
Jack
Jack
ports(2)
Description
of Controls
For the detailed instruction for each button of the remote
control, refer to the
appropriate pages in this manual.
Remote Controller
Power Button
AUTO Button
PAGE A2
This function is suitable for
analog signal input only. This
The buttons cannot be
button is for the automatic
set in this model.
adjustment of the screen
position, clock and phase.
Note: Some signal from some
graphics boards may not function
properly. If the results are
unsatisfactory, adjust your monitor's
APC
Position, Clock and Phase
manually.
(Auto Picture Control)
Button
MENU Button
MUTE Button
PAGE A2
VOLUME(
To select mute
PAGE A2
off.
DOWN/UP (
)
Buttons PAGE A2
SET Button
PAGE A2
SOURCE Selection
Button
on or
) Buttons
PIP Button
PAGE A2
The sub-screen is changed
in the order shown below.
:
SMALL -> MEDIUM
LARGE
day/night video
adjustment: The brightness
and the contrast of an image
are automatically adjusted
depending on the environment
such that they are increased
during the day and decreased
during the night.
This function is only applicable
to the Video Mode( V1, V2 ).
->
->
OFF
To select
:
OFF
->
VCR Buttons
These
are
the buttons for
VCR control.
Refer to the owner's manual
of your VCR
CLEAR -> NIGHT
A4
as
well.
Description
of Controls
Insert the batteries into the remote
control to operate the monitor.
This section shows you how to
the remote control.
Preparing the
Operating with the
Remote
Control
Make
sure to
match the
+
Point the remote control at the remote
sensor
and
and press the buttons.
-
the batteries to the marks
SOURCE
3.
Remote
Control
1. Open the battery cover.
2. Insert batteries (AAA size).
on
use
inside the
battery compartment.
Close the
cover.
30°
DOWN/UP
VOLUME
30°
Within about 23ft
POWER
MENU
(about 7m)
*
AAA AAA
Distance : About 23 ft (7 m) from the
front of the remote
Angle
of the front of the remote
Note
sensor.
Do not insert the batteries into the remote
control in the wrong direction.
Do not charge, heat, open, or short-circuit the
Do not expose the sensor of remote
control in the monitor to a strong light
batteries. Also do not throw the batteries into
source
the fire.
different types of batteries
mix old and new batteries.
Do not
nor
sensor.
About 30° in each direction
:
use
such
as
direct
sunlight
or
illumination. If so, may not be able to
operate the monitor with the remote
together,
control.
Note
Do not
drop the
remote control
or
handle it
roughly.
Do not leave the remote control in
or
extremely hot
humid conditions.
Do not expose the remote control to water
anything wet.
A5
or
the Monitor
Connecting
To set up the
monitor, ensure that the power is turned off to the monitor,
computer system, and other attached devices. Remove the rear cover of the
monitor to connect the cables and connect the cables to the monitor with it
lying on a cushion or a cloth.
Rear Cover
Follow these steps:
Connecting the Speakers
Attach the
speakers to the monitor as shown
positions.
desired
When
attaching the speakers to the
monitor
in the
When
picture
or
install them at
installing the speakers beside the monitor
Attach the
and
speakers to the monitor
tighten the screws.
DC15V
SOURCE
MENU
DOWN/UP
VOLUME
D
S-Video
Video Sound
IN
L
R
PC Audio Audio
IN
LRANT
SET
Connect the audio cables.
(Audio L/R)
Using the Computer
1. Connect the signal cable.
When
connecting the
Connect
one
DVI-D
signal
end of the monitor
.....Figure 1
cable
signal cable to the input connector on the
rear
panel of the monitor. 1 Connect the other end to the DVI-D connector on the
rear panel of the computer and tighten the screws. 2 Be sure the signal cable
aligns with the DVI-D connector.
When
connecting the
Connect
one
D-Sub
signal
end of the monitor
.....Figure 2
cable
signal
cable to the
input connector on the
rear
panel of the monitor. 1 Connect the other end to the D-Sub connector on the
rear panel of the computer and tighten the screws. 2 Be sure the signal cable
aligns with the D-Sub
connector.
MAC
end of the monitor
Connect
one
signal cable to the input connector on
panel of the monitor. 1 Connect the other end of the monitor signal
cable to the rear panel of Macintosh computer through a Macintosh adapter and
the
rear
then
tighten
screws. 2'
2. Connect the plug from the AC adapter into the back of the monitor. 3
3. Connect one end of the AC power cord to the AC adapter 4 and the other end
to a
properly grounded AC outlet that is easily accessible and close to the
monitor 5
.
A6
Connecting
the Monitor
1
Figure
DC Power
DVI-D connector
connector
PC Audio IN
DC15V
S-Video
D
3
Video Sound
IN
LR
There should be
DVI-Dporton
PC Audio Audio
IN
LRANT
the
1
computer
5
2
Audio Cable
4
AC
Power Cord
adapter
DC Power
Figure
Signal
Cable
D-sub connector
connector
2
DVI-D
PC Audio IN
DC15V
D
S-Video
Video
Sound
IN
LR
PC Audio Audio
N
LRANT
1
3
5
Power Cord
D-sub 2
Audio Cable
4
AC
adapter
Signal
Cable
MAC6
MAC
Adapter
2'
Cable
Signal
4. Connect the audio cable from
on
your
computer's
the PC AUDIO IN port to the audio output port
sound card.
5. After connecting cables, put the rear cover correctly into the holes.
Note : The figure 2'
purchased adapter.
shows the connection to
For
authorized dealer, reseller,
more
or
information
service
provider.
A7
Apple Macintosh, using a separately
adapter requirements, contact your
an
on
a
Making
use
of USB
(Universal Serial Bus)
(Universal Serial Bus) is an innovation in connecting your different
desktop peripherals conveniently to your computer. By using the USB, you will
be able to connect your mouse, keyboard, printer, and other peripherals to your
monitor instead of having to connect them to your computer. This will give you
greater flexibility in setting up your system. USB allows you to connect chain up
to 120 devices on a single USB port, and you can "hot" plug (attach them while
the computer is running) or unplug them while maintaining Plug and Plug auto
detection and configuration.
USB
USB connection
1. Connect the upstream port of the monitor to the downstream port of the USB
compliant PC
USB port).
2. Connect
or
another hub
the USB
using the USB cable (Computer
must have a
to the downstream
ports of the
compliant peripherals
monitor.
USB
upstream
Port
To USB downstream
of the USB
or
port
compliant PC
another hub cable
USB downstream Ports
connect the cables from USB
compliant peripherals such
keyboard, mouse, printer,
as
printer
mouse etc.
keyboard
scanner, etc
NOTE
To activate the USB hub function, the monitor must be connected to
PC(OS) or another hub with the USB cable(enclosed).
When connecting the USB cable, check that the
side matches the shape at the connecting side.
shape
a
USB
compliant
of the connector at the cable
When the monitor is not plugged into an electric socket, the
the downstream ports will not operate.
peripherals
connected to
Even if the monitor is in a power saving mode, USB compliant devices will function
when they are connected the USB ports(both the upstream and downstream) of the
monitor.
A8
Connection of external
equipment
Connecting the VCR/DVD
1. Connect
the audio/video output
input ports of the
jacks of the VCR/DVD
to the
corresponding
set.
If you connect the S-Video
input port
to external
equipment,
you
can
enjoy
high definition display.
?
Monitor
RCA cable
S-Video
(optional)
Sound
Video
IN
LR
YWR
SCART Cable
?
VCR/DVD
W
AUDIO
OUT
AUDIO
G
L
L
AUDIO/
R
VIDEO
DR
R
Y
S-VIDEO
OUT
S-Video cable
<When
(optional)
connecting
VIDEO
OUT
the RCA cable>
<When
connecting the
SCART cable>
2. Select an input signal.
SOURCE
DOWN/UP
SET
Press the SOURCE button
monitor to select
INPUT SELECT
DVI
DSUB
DIGITAL
V1
(AV)
(S)
input.
V1(AV): Composite video,
V2(S): S-video
ANALOG
V2
an
A9
on
the front
panel
of the
On Screen
Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system.
A quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
adjustments
in the On Screen
MENU
MENU
12
access a
control,
use
6
menu
DOWN/UP
of the OSD will appear.
the DOWN/UP (
) Buttons. When the desired
press the SET Button.
highlighted,
Press the DOWN/UP (
345
SET
VOLUME
SET
control icon is
Display, follow these steps:
DOWN/UP
Press the MENU Button, the main
To
Use the VOLUME (
) Buttons
) Buttons
to
to select the desired item.
adjust the item
Accept the changes by pressing the SET Button.
Exit the OSD
making image adjustment.
by Pressing the MENU Button.
A10
to the desired level.
On Screen
You
were
Display(OSD)
introduced to the
Selection and
Adjustment
procedure of selection and adjusting an item
using the OSD system.
Listed below
are
shown
are
icons, icon names, and icon descriptions of the items that
the
the Menu.
on
Adjusting the Screen when Using a Computer
Note
:
When
PIP items
can
OSD
input is set as a digital signal, only the BRIGHTNESS, SETUP,
be adjusted. You do not need to adjust the other items.
Adjust
Description
Brightness
CONTRAST/BRIGHTNESS
Image
and
Used to
RGB
adjust
the
brightness
of the
Color
screen.
Position
Contrast
Tracking
Setup
BRIGHTNESS
100
CONTRAST
100
Adjust
RGB
USER
COLOR ADJUSTMENT
Image
USER
9300K
the
display
to the contrast
desired.
PIP
RED / GREEN / BLUE
To set your
6500K
own
color levels.
Color
RED
50
GREEN
50
BLUE
60
Position
Tracking
9300K
To appear the
6500K
temperature.
?
Setup
?
PIP
Image
displays
9300K:Slightly
6500K:Slightly
color
bluish white.
reddish white.
Horizontal Position
IMAGE POSITION
RGB
To
Color
move
picture image left
and
Position
Vertical Position
Tracking
Setup
To
HORIZONTAL
50
VERTICAL
50
PIP
A11
move
image
up and down.
right.
On Screen
Display(OSD)
OSD
Selection and
Adjust
Description
AUTO
RGB
This function is suitable for analog
signal input only. This button is for the
TRACKING
Image
AUTO
OFF
automatic
Color
Position
Adjustment
CLOCK
50
PHASE
50
position,
CLOCK
Tracking
adjustment of the
phase.
screen
clock and
To minimize any vertical bars
stripes visible on the screen
Setup
background.The horizontal
change.
or
screen
size will also
PIP
PHASE
adjust the focus of the display.
This item allows you to remove any
To
horizontal noise and clear or sharpen
the image of characters.
Phase adjustment should be done
after adjusting the Clock.
LANGUAGE To choose the
SETUP
Image
RGB
Color
LANGUAGE
ENGLISH
IMAGE SIZE
FULL
control
OSD POSITION
Position
TRANSPARENCY
Tracking
BEEP
50
the
IMAGE SIZE This function displays the image in its
original size or enlarged size so as to
fit in the full
ON
ZOOM
language in which
displayed.
names are
screen
of the LCD
panel.
adjust position of the OSD window
on the screen. Press the SET button
to display the submenu for OSD
POSITION.
OSD POSITION To
Setup
1024
x
768 48.3 kHz / 60Hz
ELAPSED TIME 00000H
PIP
OSD POSITION
Image
RGB
Color
Position
Tracking
Setup
HORIZONTAL
50
VERTICAL
50
PIP
TRANSPARENCY To
adjust
OSD
the transparency of the
menu screen.
off.
BEEP
To select
beep
ZOOM
To
horizontal and vertical
on or
adjust
image size simultaneously.
If you want to move the zooming
point, use the H/V POSITION function
in the sub-menu. However, if the
monitor turns off when zooming in
and out the screen, the monitor will
be returned to original screen.
ELAPSED
It show how
TIME
been used.
A12
long
the monitor has
On Screen
Display(OSD)
OSD
RGB
Adjust
PIP
Image
PIP ON/OFF
OFF
Color
Position
PIP SOURCE
V1(AV)
PIP SIZE
LARGE
PIP POSITION
Tracking
PIP SOUND
Setup
PIP
Selection and
OFF
Adjustment
Description
This PIP (Picture-in-Picture) function allows the
image from the VCR or DVD to be displayed on
sub-screen while you are using a computer.
PIP
ON/OFF
To select the sub-screen on/off.
PIP
SOURCE
To select an input
:V1 (AV) / V2 (S)
PIP SIZE
To
a
PIP IMAGE
signal
for PIP.
adjust the size of the PIP
:SMALL/MEDIUM/LARGE
screen.
PIP
To adjust the position of PIP screen.
POSITION Press the SET button to display the
submenu for PIP POSITION.
PIP POSITION
Image
RGB
Color
Position
Tracking
Setup
HORIZONTAL
50
VERTICAL
50
PIP
PIP
SOUND
To turn the PIP sound on/off.
PIP
IMAGE
To adjust the image of the PIP screen;
Press the SET button to display the
submenu for PIP IMAGE.
Use the VOLUME (
) buttons to
adjust the item to the desired level.
PIP IMAGE
Image
RGB
PIP CONTRAST
53
PIP BRIGHTNESS
70
PIP SHARPNESS
50
PIP COLOR
50
PIP TINT
50
Color
Position
Tracking
Setup
PIP
PIP CONTRAST
Adjust the display to the contrast desired.
PIP BRIGHTNESS
Used to adjust the brightness of the
PIP SHARPNESS
To adjust the clearness of the
screen.
screen.
PIP COLOR
To adjust the color to desired level.
PIP TINT
To adjust the tint to desired level. This function is
available only in NTSC broadcasting mode.
A13
On Screen
Display(OSD)
Selection and
Adjustment
Adjusting the Screen when Using VCR/DVD ( V1 / V2 )
Adjust
OSD
Description
CONTRAST
ADJUSTMENT
Adjustment
Audio
Setup
CONTRAST
53
BRIGHTNESS
70
SHARPNESS
50
COLOR
50
TINT
50
the
desired.
display to
Adjust
BRIGHTNESS Used to
adjust
the
the contrast
brightness
of the
screen.
SHARPNESS
To
adjust
the clearness of the
COLOR
To
adjust
the color to desired level.
TINT
To adjust the tint to desired level.
This function is available only in
NTSC broadcasting mode.
VOLUME
Raises
or
lowers audio level.
BASS
Raises
or
lowers Bass level.
TREBLE
Raises
or
lowers treble level.
MUTE
Used to select mute on
sound off) and mute off
sound on).
SOUND
To select the audio mode.
: MONO/STEREO
screen.
AUDIO
Adjustment
VOLUME
50
BASS
50
Audio
TREBLE
50
Setup
MUTE
OFF
SOUND
STEREO
LANGUAGE To choose the
control names
SETUP
Adjustment
LANGUAGE
ENGLISH
IMAGE SIZE
FULL
Audio
Setup
OSD POSITION
TRANSPARENCY
BEEP
0
(means
(means
language in which
displayed.
the
are
IMAGE SIZE This function displays the image in
its original size or enlarged size so
as to fit in the full screen of the LCD
ON
panel.
OSD POSITION
To adjust position of the OSD
window on the screen. Press the
SET button to display the submenu
for OSD POSITION.
OSD POSITION
Adjustment
Audio
Setup
HORIZONTAL
50
VERTICAL
50
TRANSPARENCY To
adjust the transparency of the
OSD menu screen.
BEEP
To select
A14
beep
on or
off.
display modes listed below are the most commonly used modes and are
set as factory defaults. The monitor automatically recognizes most input data
modes, and displays centered images with the proper sizing.
The
If the
to
screen size is inappropriately set or the display is not centered, you need
readjust the parameters of the monitor using the OSD (on-screen display).
Display Modes (Resolution)
123456789
10
11
12
13
14
15
*16
VESA, IBM
640
x
350
31.469
70
VESA
VESA
VESA
VESA
640
x
480
31.469
60
640
x
480
37.500
75
640
x
480
43.269
85
720
x
400
31.468
70
VESA
VESA
800
x
600
37.879
60
800
x
600
46.875
75
VESA
MAC
VESA
800
x
600
53.674
85
832
x
624
VESA
VESA
MAC
SUN
VESA
VESA
*17
*18
*19
*
VESA
VESA
Analog only
49.725
75
1024
x
768
48.363
60
1024
x
768
60.020
75
1024
x
768
68.677
85
1152
x
870
68.681
75
1152
x
900
61.805
65
1280
x
1024
63.981
60
1280
x
1024
79.976
75
1600
x
1024
62.110
60
1600
x
1200
75.000
60
1600
x
1200
93.750
75
Troubleshooting
Check the
following before calling for service.
Display Position is incorrect.
Select AUTO in the OSD menu.
If the results are unsatisfactory, adjust the image position using the position icon in
the on screen display.
On the
screen
background, vertical
bars
or
stripes
are
visible.
Select AUTO in the OSD menu.
If the results are unsatisfactory, decrease the vertical bars
CLOCK icon in the on screen display.
in any
Any horizontal noise appearing
portraid.
image
or
or
characters
stripes using the
are
not
clearly
Select AUTO in the OSD menu.
If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon
in the on screen display.
Check
The
signal Cable
signal cable is
message.
connected,
not
or
is loose. Check and
secure
the connection.
OUT OF RANGE message appears.
Picture is blank.
The frequency of the
the monitor.
signal from the video card is outside the operating
range of
Horizontal Frequency: 30kHz-94kHz
Vertical Frequency: 56Hz-85Hz
*Use the graphics board's utility software to change the frequency setting (Refer to the
manual for graphics board).
*You can change the setup to the supported resolution using the Safe Mode (Press the F8
key during booting
the
system).
The power LED is illuminated amber.
The monitor is in its display power management mode.
There is no active signal coming from the PC.
The signal cable is not fastened securely.
Check the computer power and graphics adapter
The monitor doesn't enter the power
configuration.
saving off
mode (Amber).
video signal is not VESA DPMS standard. Either the PC or the video
controller card is not using the VESA DPMS power management function.
Computer
NOTE
If the power indicator(LED)
the monitor.
light
is
blinking amber,
Then press a power ON/OFF button
technician for more information.
on
the front
A16
may result in abnomal condition of
panel
control and call your service
Specifications
Display
Sync Input
Video
Input
Type
22inch (55.8cm) Wide SXGA TFT LCD
Viewable Size
Anti-Glare coating
22inch (55.8cm)
Viewing Angle(max.)
Pixel pitch
70˚
True color
16.7 million color
Horizontal
Freq.
Vertical Freq.
Input form
30kHz
Signal input
Input Form
pin D-Sub connector/DVI-D connector
Separate, RGB Analog, 0.7Vp-p/75ohm, Positive
Digital
Analog : 1600 x 900, 1600 x 1024, 1600 x 1200 @ 75Hz
Digital : 1280x 1024 @ 60Hz
56Hz
Signal
-
-
Input
PC
:
700mVrms, Video : 400mVrms
Audio output and its ratio
PC
:
1.5W
+
2W
+
:
Speaker Impedance
8Ω
Power
Normal
≤ 80W
Consumption
Stand-by/Suspend
≤
Power Off
≤8W
Power
Input
94kHz (Automatic)
85Hz (Automatic)
15
VCR
Dimensions
0.294mm
x
Separate, TTL, Positive/Negative
Digital
Resolution (max.)
Audio
(Left/Right/Up/Down)
0.294
(left+right)/3%
(left+right)/3%
8W
Width
58.2
Height
Depth
46.75
7.3
1.5W
2W
cm
/ 22.9 inches
/ 18.4 inches
cm
cm
/ 2.87 inches
DC 15V 5.0A
Input
Output
AC 100-240V, 50 /60Hz, ~1.5A
+
DC 15V
5.33A
Weight
Net
14.8
Tilt
10˚~30˚
AC
Adapter
Range
Environment
Conditions
-
kg / 32.6 lbs
Operating condition
10˚C to 35˚C
Temperature
10% to 80% non-condensing
Humidity
condition
Storage
-20˚C to 60˚C
Temperature
5% to 95% non-condensing
Humidity
NOTE
Information in this document is subject to
change without notice.
A17
Download PDF