LG | PWFMDD201.ENCXLAP | LG PWFMDD201.ENCXLAP Owner’s Manual

LG Smart AC
Smart Inverter
Remote Control System
User’s Manual
Wi-Fi Module for
LG Smart Air Conditioning Application
Model: PWFMDD201
P/NO: MFL67891020
TABLE OF CONTENTS
3 SAFETY INSTRUCTIONS
4 INTRODUCTION
5 INSTALLATION
5
Wi-Fi MODULE INSTALL
6
MOBILE APP INSTALL
6
SIGNING UP FOR A MEMBERSHIP
8
Wi-Fi CONNECTION
15
FINDING PASSWORD
16 REFERENCE FOR EACH FUNCTION
16 DATA GUIDE
17 A CHECK LIST BEFORE CALLING TO A
CUSTOMER SERVICE TO REPORT A
PROBLEM
Thank you for using LG Smart AC.
If you read the user manual before using the product, you can will have a
better and longer use of the product.
* Please read this manual to use LG Smart AC safely and correctly.
User Manual
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure
peak performance of your product.
! WARNING
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and
others.
• Appliance shall be installed in accordance with national wiring regulations.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• The information contained in the manual is intended for use by a qualified service
technician familiar with safety procedures and equipped with the proper tools and
test instruments.
• Failure to carefully read and follow all instructions in this manual can result in
equipment malfunction, property damage, personal injury and/or death.
• When the power cord is to be replaced, replacement work shall be performed by
authorized personnel only using genuine replacement parts only.
! CAUTION
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.
• Install the drain hose properly for smooth drainage of condensed water. Failure to do
so may result in product failure.
• Keep level even when installing the product.
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas
will not inconvenience the neighbors. Failure to do so may result in conflict between
neighbors.
• When transporting the equipment, there should be at least 2 or more people, or a
forklift.
It may result in serious injury.
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly.
It may result in product failure.
• I.T.E.(Information Technology Equipment) regulation is not applied as the USB port in
Wi-Fi module is only applicable to specific products(Air conditioner).
0197
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
3
LG Smart AC
INTRODUCTION
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
!
This symbol alerts you to hazards that may cause harm to the air conditioner.
!
This symbol indicates special notes.
Installation Parts
Name
Quantity
Wi-Fi
Module
1EA
Installation Tools
Shape
Figure
Name
Screw Driver
Installation Map
USB
Harness
1EA
USB Wire
Wi-Fi
Module
Manual
1EA
LG ThinQ Server
Wi-Fi
Module
Wi-Fi
Module
Support web page
If you want more information, Please visit to support web page.
http://au.smartthinq.com(Australia)
4
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
INSTALLATION
Wi-Fi Module Install
1. Verify that indoor unit is turned off and power is cut off at the outdoor unit’s
input power circuit breaker.
2. Open the control panel of the indoor unit.
3. Connect USB connector to Indoor PCB (CN_WF).
Put a cable tie connected with the harness core in the control panel hole.
4. Connect USB harness to Wi-Fi module.
5. Attach the Wi-Fi Module on the wall with the tape.
Indoor PCB
USB Harness
Control box
Wi-Fi Module
CN_WF
Harness core
Control Panel
Example of the installation
1
Direct
Sun ray contact area
Roof
yes
no
H = 200mm or more
Ceiling
no
1.5 m
no
1 Installation example on the wall beside wired remote controller
!
NOTE
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
• Installations must comply with the applicable local/national or international standards.
• If the product is not attached flat , it may fall.
• Wi-Fi module should be installed under the ceiling.
• Avoid to install Wi-Fi module in a place blocked by the wall.
• When installing the Wi-Fi module , do not bury it in the wall.
• Do not install the USB wire harness to be 21m or more. (It can cause communication error)
• Wi-Fi module should be installed within 10m from wireless router.
• If there is the wall or a barrier between Wi-Fi module and wireless router, communication will be not smooth. (It depends on wall construction or a barrier)
• Do not install Wi-Fi module around high humidity and temperature place.
※Other details, please refer to the Products manual.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
5
LG Smart AC
Mobile app install
The mobile app can be downloaded from the Google play/App Store through Wi-Fi
or 3G/4G. (LG Smart AC)
The pictures of mobile app can be different from latest version.
Signing up for a membership
After signing up for a membership on the mobile app or Your own country web
page.(Please refer to the 4 page.)
Selected your country.
If you select a country,
it will change to that language. After that, touch
the “Sign Up”
6
After checking and agreeing to each user agreement,
touch “Apply”.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
Enter the user registration information to sign up for the service,
and touch "NEXT"
A confirmation email has been sent to
your email address that you provided.
Please touch the “Apply” button.
Once you touch the “Confirm Email” button
on your email, signing up will be completed
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
7
LG Smart AC
Wi-Fi Connection
Turn on the indoor unit, wait 1 minute and then start Wi-Fi connection step.
A function to register an air conditioner on the server before using the mobile app.
Selected your country. If you select a country, it will change to that language.
After that, Entering the E-mail and the
password. Then touch the “Sign In” button
When registering the product for the first
time, a pop-up will be activated. Once the
“OK” button is touched, it will change to
the air conditioner registration screen.
Before touch the “Continue” button,
you have to set registration mode and
setting Wi-Fi. (Please refer to the
9~10 page.)
8
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
Reference
* Remote Controller may appear slightly different, depending on your model.
• Duct Setting – Wi-Fi Module Access Point mode
It is the function to operate Wi-Fi module connected to the product in access
point mode.
PQRCVSL0 / PQRCVSL0QW
Push the
button repeatedly until
1 the term of 'AP' is displayed on the
screen.
2
Press the
button.
❈ After setup, it automatically gets
out of setup mode.
While Wi-Fi module is operating in
3 access point mode, the term of 'AP'
blinks on the screen of cable remote
control.
- It will take approx. five (5) seconds
before Wi-Fi module operates in
access point mode.
- In the case Wi-Fi module is not
installed, the access point mode
does not work.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
9
LG Smart AC
PDRCUDC0
1 Press
button to appear
button on the screen.
2 Press the
button.
3 Push the position of the button at the
third row of the fifth column on the
left figure for three(3) seconds.
4 While Wi-Fi module is operating in access
point mode, the term of 'AP' blinks on the
screen of cable remote control.
- It will take approx. five (5) seconds before
Wi-Fi module operates in access point
mode.
- In the case Wi-Fi module is not installed,
the access point mode does not work.
! CAUTION
• The Wi-Fi on smartphone must be turned on to start registering the product.
• If there is a problem with a connection, the ‘prevention of connection failing’ function in the advanced menu of the Wi-Fi setting in the smartphone
needs to be cancelled for some devices.
10
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
Reference
Registering the product for iPhone
• When the network is not stable or using an app for iPhone
- The app on an iPhone does not support the automatic connection of Wi-Fi.
- So, setting Wi-Fi by hand power. The way setting is as follows:
• How to set Wi-Fi
Press the home button
of iPhone.
Touch the “Settings”
icon.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
11
LG Smart AC
Touch the “Wi-Fi” menu.
After “Wi-Fi” on, select the
AP named
“LGE_AC-xx-xx-xx”
‘x’ represents hexadecimal
numbers, and they may be
different from the numbers
on the example screen.
Input the password
“lge12345”
and press the home
button of iPhone twice
12
Touch the
“LG Smart AC” icon
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
After complete setting registration mode and Wi-Fi
connection, touch the
“Continue” button
Once the product search
is complete, a pop-up to
ask initialization of the
product appears.
Touch the “OK” button
Please select a router that
you want to connect to.
Enter the password for the
router correctly, and then
touch the “OK” button.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
13
LG Smart AC
Please check the Mac Address and Wi-Fi password.
Enter a nickname for the air conditioner, and then touch the
“Complete” button.
(Appropriate product name must
be selected correctly)
! WARNING
If the router is WEP-open security method, you may fail to set up the network. After you
have changed to other security method of router, please register of product again.
Reference
In case of more than two Product APs, turn on
only one
A/C that you want to register.
Check the “Reset product” pop-up
1. It must be initialized for exhibition air-conditioning, because it has the information.
2. When you first register, you must initialize.
3. Information that has been initialized:
- Specific ID of the Product
- Accumulated filter use
14
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
Finding password
The mobile app can be used after logging in.
Enter the E-mail ID on the
log in screen.
Touch the “Forgot Password?” button.
Temporary password will be
sent to the email address
that you provided when you
signed up.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
15
LG Smart AC
REFERENCE FOR EACH FUNCTION
Main Function
Function Details
Main Function Remark
A frequently used
• As basic favorite, it provides type of
function can be set as favorite as follows.
Favorite to execute
Desired air types can be saved
the function
additionally.
conveniently at any
- Quick cool wind can quickly cool the
time.
indoor
Favorite
h Supported functions can be different depending on the models.
DATA GUIDE
• Open source
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers
and copyright notices are available for download. LG Electronics will also provide
open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This offer is valid for three (3) years from
the date on which you purchased the product.
• Router Minimal Specification
Model Type : CISCO, APPLE, ASUS, D-LINK ,TP LINK, TRENDNET, ACTIONTEC, NETGEAR, 2WIRE
* Specified model is optimized. A normal operation is not possible in the environment that does not satisfy the minimal specifications.
* If using a sharing device having less coverage or egg (dongle type), you may
not connect the air conditioner smoothly.
! WARNING
This device is not available for laptop or similar portable system.
16
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
A CHECK LIST BEFORE CALLING TO A CUSTOMER SERVICE TO REPORT A PROBLEM
Main Function
Function Details
Remark
• Did you connect to a • Each common carrier has a router to give
Wi-Fi that is set with services to only applicable members.
Can’t Sign in to the
password?
Use a different wireless router.
LG Smart AC App.
• Did you confirm
• Check your email and confirm the LG
from your email?
Smart AC App.
Can’t sign up for
the
membership.
Can’t connect the
LG Smart AC App.
to the indoor unit.
The indoor unit is
not
connecting to the
Wi-Fi.
• Did you provide your
• You should provide email address in
email address
xxx@xxxx.xxx format correctly.
correctly?
• Is the indoor unit
turned off?
• Is the Wi-Fi signal
weak?
• Is the wireless router
that is connected to
the indoor unit turned
off?
• Is the LG Smart AC
App. not operating at
all?
• Is it disconnected
with the indoor unit
suddenly?
• Isn’t the wireless
router turned off?
• Isn’t the internet
cable unplugged
from the wireless
router?
• Isn’t the wireless
router placed
distantly?
• Turn the indoor unit on.
• Move to a place where the Wi-Fi signal is
strong.
• Turn the router on.
• Turn off the Wi-Fi on smartphone and
turn it back on.
• Sign in the LG Smart AC App. again.
• Turn the wireless router on.
• Plug in the internet cable to the wireless
router.
• Install the wireless router near by the air
conditioner.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
17
LG Smart AC
Main Function
A device is not
registering on the
indoor unit.
Function Details
• Isn’t the wireless
router turned off?
• Isn’t the internet
cable unplugged
from the wireless
router?
• Isn’t the wireless
router placed
distantly?
• Did you sign up for
the membership
first?
Remark
• Turn the wireless router on.
• Plug in the internet cable to the wireless
router.
• Install the wireless router near by the air
conditioner.
• Sign up for the LG Smart AC App.
It is connected to
the Wi-Fi but not
operating.
• Is Wi-Fi indicator light • When the Wi-Fi connection is not stable,
turned on the indoor
it may not operate properly.
unit?
• If the password of the wireless router is
• Did you provide the
not provided correctly when registering
password of the
the device, the Wi-Fi connection may not
wireless router
operate properly. Provide the password
correctly when
registering the device? of the wireless router correctly
Can’t delete the
registered air
conditioner.
After signing in, more
than 2 selection list
of air conditioner
displays.
Previously
Check whether the
registered account
product is registered
and information are
with a new account.
disappeared.
18
• 2 or more air conditioners can be registered
in one account, and the registered air
conditioners can be deleted on the web
site. (http://us.smartthinq.com)
- After logging in the mobile app, set the
applicable guide>able to confirm on page
39 of the LG Smart AC App. guide.
• When the same product is registered
again with a new account, the previous
account and information will be all
initialized.
- The new account with the registered
product becomes a master.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
User Manual
Main Function
Function Details
Remark
• The membership sign up is managed by
LG Electronics enterprise wide. Thus, if
you have signed up already before, log in
When signed up for
with your account information and
Can’t sign up due to
LG Electronics one or register the product. When trying to sign
duplicate IDs.
more times.
up with the same ID, a message stating
that the ID is used already will pop up.
- A service change is available on the web
page with the applicable ID.
Currently, another
user is controlling.
Check the indicator.
Can’t control
• The air conditioner controlling right is
given to the smartphone(account) which
logs in first. The air conditioner cannot be
controlled by multiple users at the same
time. After the user who has the
controlling right currently logs out, the
controlling is available to other accounts.
Network connection
• Check the Wi-Fi connection status of the
is not smooth. Check
smartphone.
the indicator.
Others
The App. shut down
suddenly.
• The app may shut down once in a while
according to the memory maintenance of
the smartphone.
Due to our policy of continuous product innovation, some specifications may change without notification.
“LG” is a registered trademark of LG Corp.
19
Download PDF

advertising