LG | HSNH1865NA0 | LG HSN24SN2 Owner’s Manual

ENGLISH
ENG
OWNER’S MANUAL
AIR
CONDITIONER
Please read this manual carefully before
operating your set and retain it for future reference.
TYPE : WALL MOUNTED
*MFL68587201*
Rev : 04 (01T15)
www.lg.com
2
TIPS FOR SAVING ENERGY
ENGLISH
ENG
TIPs FOR SAVING ENERGY
Here are some tips that will help you to minimize the power consumption when you use the air conditioner.
You can use your air conditioner more efficiently by referring to the instructions below :
• Do not cool the indoor excessively. This may ENG
be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner
is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the Air filter may block the
air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
3
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situation and ensure peak performance of you product.
! WARNING
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Air conditioner shall be installed in accordance with national wiring regulations.
• The information contained in the manual is intended for use qualified service technician familiar
with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
• This appliance is not intend for use by persons (including children) with reduced physical, senary or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for theirs safety.
• Children should be supervised to ensure that they do not play with the appliance.
• When the power cord is to be replaced,replacement work shall be performed by authorized
personnel only genuine replacement parts.
Installation
• Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure
to do so may result in electric shock or product failure.
• Contact an authorized service center when you install or relocate the air conditioner. Failure to
do so may result in serious injury or product failure.
• Always use a power plug and socket with a ground terminal. Failure to do so may result in electric
shock or product failure.
• Install the panel and the cover of the control box safely. Failure to do so may result in explosion or fire.
• Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to
do so may result in electric shock or product failure.
• Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled
off or deteriorated then it must be replaced. It may result in fire or electric shock.
• Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious
injury or product failure.
• Do not install the air conditioner on an unstable surface or where there may be a danger of it
falling. It may result in death, serious injury, or product failure.
ENGLISH
ENG
IMPORTANT SAFETY INSTRUCTIONS
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
ENG
Operation
• Do not let the air conditioner run for a long time when the humidity is very high or when a door or
window has been left open. Failure to do so may result in product failure.
• Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure
to do so may result in fire, electric shock, or product failure.
• Do not place any objects on the power cord. It may result in electric shock or product failure.
• Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in
fire or electric shock.
• Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or
product failure.
• Do not place a heater or other heating appliances near the power cable. It may result in fire, electric
shock, or product failure.
• Do not allow water to run into the air conditioner. It may result in explosion or fire.
• Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It
may result in explosion or fire.
• Do not use the air conditioner for an extended period of time in a small place without ventilation.
Ventilate the place regularly. Failure to do so may result in explosion or fire.
• When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so
may result in explosion or fire.
• Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do
so may result in explosion or fire.
• Stop operating and close the window in storm or hurricane. If possible remove the product from the
window before hurricane arrives.
• Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric
shock or product failure.
• Contact an authorized service center when the air conditioner is submerged into water due to flooding.
Failure to do so may result in explosion or fire.
• Be cautious water could not enter the product.
• Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater
are used simultaneously. Failure to do so may result in explosion or fire, serious injury, or product failure.
• Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure
to do so may result in death, serious injury, or product failure.
• Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to
do so may result in product failure.
• For inner cleaning, contact an Authorized Service Center or a dealer.
• Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also
cause failure of product, fire, or electric shock.
IMPORTANT SAFETY INSTRUCTIONS
5
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner.
Failure to do so may result in product failure.
• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may
result in product failure.
• Keep level even when installing the product.
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not
inconvenience the neighbors. Failure to do so may result in conflict between neighbors.
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It
may result in serious injury.
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may
result in product failure.
• Do not turn on power under disassembling the equiment for installation, service, repair.
Operation
• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may
result in serious injury.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is
a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or
electric shock.
• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.
Use a smooth cloth. It may result in serious injury or product failure.
• Never touch the metal parts of the air conditioner when you remove the air filter. It may result
serious injury or product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often
if necessary.
• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is
operating. It may result in electric shock.
• Do not drink the water drained from the air conditioner. It may result in serious health complications.
• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height.
Failure to do so may result in serious injury or product failure.
• Do not mix the batteries for the remote control with other types of batteries or mix new batteries
with used batteries. Failure to do so may result in product failure.
• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or
serious injury.
• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is explosion to the
battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
• If you swallow the battery fluid from a leak. Wash out the inside of your mouth thoroughly and
then consult a doctor. Failure to do so may result in serious health complications.
ENGLISH
ENG
! CAUTION
6
CONTENTS
ENGLISH
ENG
Contents
2
TIPs FOR SAVING ENERGY
3
IMPORTANT SAFETY INSTRUCTIONS
7
BEFORE USE
13
ADVANCED FUNCTIONS
13
7Components
7 - Indoor unit TYPE 1
7 - Indoor unit Type 2
8 - OUTdoor unit
9
Inserting batteries
9
Installing the remote control holder
9
Operating method
Changing room temperature quickly
(Jet Cool)
14
Operating the air conditioner
without the remote control
14
Restarting the air conditioner
automatically
14 - Disabling auto restart
15
Functions of AVS
15
Advantage of LG AVS
15 - Compressor Protection
15 - Continuous Airflow & auto
restart
15
How to Cancel and Reset AVS
Function
10
USING THE REMOTE CONTROL
10
Wireless remote control
16MAINTENANCE
11
BASIC FUNCTIONS
11
Cooling your room (Cooling
operation)
HEATing your room (HEATing
operation)
Removing humidity (Dehumidifying
operation)
Adjusting the fan speed
Adjusting the air flow direction
Setting the timer
Cancel the timer setting
17
17
17
11
11
12
12
12
12
Cleaning the air filter
Cleaning Triple filter (optional)
Cleaning 3M filter (optional)
18TROUBLESHOOTING
18
18
Self-diagnosis function
Before requesting service
BEFORE USE
7
ENGLISH
ENG
BEFORE USE
Components
Indoor unit
TYPE 1
Air inlet
Front cover
Air filter
On/Off button
Triple filter(Optional)
3M filter (Optional)
Air outlet
Signal receiver
LED display
Horizontal
vane
Vertical louver
*The feature can be changed according a type of model.
Indoor unit
Type 2
Air inlet
Front cover
Air filter
On/Off button
Triple filter(Optional)
3M filter (Optional)
Signal receiver
Air outlet
LED display
Horizontal vane
Vertical louver
*The feature can be changed according a type of model.
!
NOTE
• The number of operation lamps and their locations may vary, depending on the model of the
air conditioner.
Rev : 04 (01T15)
8
BEFORE USE
ENGLISH
ENG
OUTdoor unit
Air inlet
Air outlet
Connecting wires
Piping
Drain hose
Base plate
*The feature can be changed according a type of model.
Rev : 04 (01T15)
BEFORE USE
Insert batteries before using the remote control.
The battery type used is AAA (1.5 V).
1. Remove the battery cover.
2. Insert the new batteries and make sure that the
(+) and (-) terminals of the batteries are installed
correctly.
2. Fix the holder by fastening the 2 screws firmly
with a screwdriver.
3. Slide the remote control into the holder.
Operating method
3. Reattach the battery cover.
!
NOTE
Point the remote control towards the signal receiver
at the bottom of the air conditioner to operate it.
• If the display screen of the remote control
starts to fade, replace the batteries.
Installing the remote control
holder
Install the holder where there is no direct sunlight to protect the remote control.
1. Choose a safe and easily-accessible place.
*The feature can be changed according a type
of model.
!
NOTE
• The remote control may operate other electronic
devices if pointed towards them. Make sure to
point the remote control towards the signal
receiver of the air conditioner.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
ENGLISH
ENG
Inserting batteries
9
10
USING THE REMOTE CONTROL
ENGLISH
ENG
USING THE REMOTE CONTROL
You can operate the air conditioner more conveniently with the remote control.
Wireless remote control
Control Display
panel
screen
On/Off button : Turn the power On/Off.
C
Display
screen
Description
Temperature adjustment buttons :
Adjust the room temperature when
cooling.
Operation mode selection button :
Select the operation mode.
Cooling operation ( )
Dehumidifying operation ( )
Heating operation ( )
Control
panel
Jet cool button : Cools down the
indoor temperature within a short
period of time.
Indoor fan speed button : Adjust
the fan speed.
-
Air flow direction button : Adjust
the air flow direction vertically.
Off timer button : Set up automatic off
-
Timer clear button : Cancel timer
setting
*Some functions may not be supported, depending on the model.
Rev : 04 (01T15)
BASIC FUNCTIONS
11
Cooling your room
(Cooling operation)
1. Press
to turn on the power.
2. Press
repeatedly to select the cooling
operation.
is displayed on the display screen.
Removing humidity
(Dehumidifying operation)
This mode removes excess moisture from an environment with high humidity or in the rainy season,
in order to prevent mold. This mode adjusts the
room temperature and the fan speed automatically
to maintain the optimal level of humidity.
1. Press
to turn on the power.
2. Press
repeatedly to select the dehumidifying operation.
is displayed on the display screen.
3. Press or
to set the desired temperature.
- The temperature range is 18°C - 30°C.
HEATing your room
(HEATing operation)
1. Press
to turn on the power.
2. Press
repeatedly to select the heating
operation.
is displayed on the display screen.
3. Press or
to set the desired temperature.
- The temperature range is 16°C - 30°C.
!
NOTE
• This function may not be supported, depending
on the model.
!
NOTE
• In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also,
the room temperature is not displayed on the
display screen.
ENGLISH
ENG
BASIC FUNCTIONS
12
BASIC FUNCTIONS
ENGLISH
ENG
Adjusting the fan speed
Setting the timer
1. Press
Use the off timer mode to turn off the air conditioner automatically.
1. Press
to turn on the power.
2. Press
repeatedly to select the hour you
want to turn air conditioner off (Up to 7 hours).
The hour increases automatically with long press.
is displayed on the display screen.
to adjust the fan speed.
Remark
Speed
High
Medium
Low
Natural wind
.
Adjusting the air flow direction
Cancel the timer setting
1. To adjust the direction of the air flow vertically, press
change the air flow direction
automatically.
1. Press
!
NOTE
• Adjusting the air deflector arbitrarily may cause
product failure.
• If you restart the air conditioner, it starts to operate with the previously set direction of air flow.
to cancel all timer setting.
ADVANCED FUNCTIONS
The air conditioner offers some additional advanced
functions.
Changing room temperature
quickly (Jet Cool)
This mode allows you to cool indoor air quickly
in summer.
1. Press
to turn on the power.
2. Press
- In jet cooling mode, strong air blows out at a
temperature of 18°C for 30 minutes.
ENGLISH
ENG
ADVANCED FUNCTIONS
13
14
ADVANCED FUNCTIONS
ENGLISH
ENG
Operating the air conditioner
without the remote control
Restarting the air conditioner
automatically
You can use the On/Off button of the indoor unit
to operation the air conditioner when the remote
control is unavailable. However, the fan speed is
set to high.
1. Open the front cover.
- Lift up both side of the cover slightly.
Type 1
Type 2
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings. This function is a factory default setting.
*The feature can be changed according a type
of model.
2. Press the On/Off button.
Disabling auto restart
1. Open the front cover.
- Lift up both side of the cover slightly.
Type 1
Type 2
*The feature can be changed according a type
of model.
2. Press the On/Off button and hold it for 6 seconds.
- The unit will beep twice and the lamp will blink
twice 4 times.
Type 1
Type 2
Type 1
Type 2
On/off
button
On/Off
button
*The feature can be changed according
a type
of model.
- For cooling and heating model, the operation mode
changes, depending on the room temperature.
Room Temp.
Set Temp.
Operation mode
Below 21°C
24°C
Heating operation
Above 21°C
and below
24°C
23°C
Dehumidifying
operation
Above 24°C
22°C
Cooling operation
- For cooling only model, the temperature is set
to 22°C.
On/Off
button
On/Off
button
*The feature can be changed according a type
of model.
- To re-enable the function, press the On/Off button
and hold it for 6 seconds. The unit will beep twice
and the lamp will blink 4 times.
!
NOTE
• If you press and hold the On/Off button for 3-5
seconds, the unit will switch to the test operation.
In the test operation, the unit blows out strong
air for cooling for 18 minutes and then returns
to the factory default setting.
ADVANCED FUNCTIONS
15
*The feature can be changed according a type of model.
AVS : Automatic Voltage Switcher automatically monitors voltage supply and protects the Product
in case of unstable electricity
Advantage of LG AVS
Voltage (V)
260 255
295
292
290V
245
241
260
238
172
145
195
235
181
Super AVS
When the voltage of the electric current is either
below 170V or above 290V, the AVS kicks in and
shuts down the exterior unit to protect the compressor from breaking down.
175
Highest Voltage
170V
Lowest Voltage
Compressor Protection
Compressor is the most expensive and important
component of an air conditioner, and LG Super AVS
prevents the compressor from damage caused by
voltage fluctuation.
Continuous Airflow & auto restart
After turning off the compressor due to a surge or
drop in voltage, LG’s AVS will automatically check
the voltage continuously, and will automatically.
turn your AC on when the voltage fall back within
the safe range.
(Compressor restart by delay of 3 minutes)
How to Cancel and Reset AVS Function
TYPE 1
TYPE 2
On/Off button
On/Off button
1) AVS Function Cancel
Press the ON/OFF Button about 13 seconds during which Buzzer will sound for 4 times. Then Release
the ON/OFF Button.
At this moment, Operation LED or Backlight will flash 2 times for 4 Buzzer Sounds and then the Voltage
Tripper will be Cancelled.
2) AVS Function Reset
Press the ON/OFF Button about 13 seconds during which Buzzer will sound for 4 times. Then Release
the ON/OFF Button.
At this moment, Operation LED or Backlight will flash 1 times for 4 Buzzer Sounds and then the Voltage Tripper will be Set.
ENGLISH
ENG
Functions of AVS
16
MAINTENANCE
ENGLISH
ENG
MAINTENANCE
Clean the product regularly to maintain optimal performance and to prevent possible breakdown.
Type 2
Type 1
Air filter
Triple filter
(Optional)
3M filter
(Optional)
Air filter
Triple filter
(Optional)
3M filter
(Optional)
* The feature can be changed according a type of model.
Item
Cleaning interval
Cleaning method
Air filter
2 weeks
See “Cleaning Air filter”
Triple filter
3 months
See “Cleaning the Triple filter”
3M filter
1 month
See “Cleaning 3M filter”
Indoor unit surface
Regularly
Use a soft, dry cloth. Do not use bleach
or abrasives.
Outdoor unit
Regularly
Use steam to clean the heat exchanger
coils and the panel vents (consult with
technician).
! CAUTION
• Turn off the power and unplug the power cord before you perform any maintenance; otherwise
it may cause electric shock.
• Never use water that is hotter than 40°C when you clean the filters. It may cause deformation or discoloration.
• Never use volatile substances when you clean the filters. They may damage the surface of
the product.
• Do not washed the 3M filter with water, because the filter can be damaged.
!
NOTE
• The location and shape of the filter may differ, depending on the model.
• Make sure to clean the heat exchanger coils of the outdoor unit regularly, as dirt collected in
the coil may decrease the operational efficiency or increase energy costs.
Rev : 04 (01T15)
MAINTENANCE
17
Cleaning Triple filter (optional)
Cleaning the Air filter once every 2 weeks or more
if necessary.
1. Turn off the power and unplug the power cord.
2. Open the front cover.
- Lift up both sides of the cover slightly.
1. Turn off the power and unplug the power cord.
2. Open the front cover and remove Air filter (See
“Cleaning Air filter").
3. Pull out the Triple filter.
Type 1
Type 1
Type 2
Type 2
* The feature can be changed according a type
of model.
3. Hold the knob of the Air filter, lift it up slightly
and remove it from the unit.
Type 1
Type 2
4. Dry the filer in direct sunlight for 2 hours.
!
NOTE
• The location and shape of the filters may differ,
depend on the model.
Cleaning 3M filter (optional)
Clean the filter once every 1 months and change
the new filter once every 6 months.
1. Turn off the power and unplug the power cord.
2. Open the front cover and remove Air filter. (See
“Cleaning Air filter”).
3. Pull out 3M filter.
* The feature can be changed according a type
of model.
4. Clean the filter with a vacuum cleaner or with
warm water.
- If dirt is difficult to remove, wash the filter in
lukewarm water with detergent.
5. Dry the filter in the shade.
!
NOTE
• For inner cleaning, contact an Authorized Service
center or a dealer. Do not use harsh detergent that
causes corrosion or damage on the unit. Harsh
detergent may also cause failure of product, fire,
or electric shock.
Type 1,2
* The feature can be changed according a type
of model.
4. Use a vacuum cleaner to remove any dirt. Do not
wash the filter with water may be makes damage
to the filter.
!
NOTE
• The location and shape of the filters may differ,
depend on the model.
Rev : 04 (01T15)
ENGLISH
ENG
Cleaning the air filter
18
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
Self-diagnosis function
This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit will blink
in 2 seconds intervals. If this occurs, contact your local dealer or service center.
Before requesting service
Please check the following before you contact the service center. If the problem persists, contact your
local service center.
Problem
Possible causes
Corrective action
-
Turn off the air conditioner, unplug
the power cord and contact the
service center.
The air conditioner is unplugged.
Check whether the power cord
is plugged into the outlet.
There is a burning smell and a
strange sound coming from the unit.
Water leaks from the indoor unit
even when the humidity level is low.
The power cord is damaged or
generating excessive heat.
A switch, a circuit breaker (safety,
ground) or a fuse is not operated
properly.
A fuse is blown or the power Replace the fuse or check if the
supply is blocked.
circuit breaker has tripped.
The air conditioner does not works. A power failure has occurred.
The voltage is too high or too low.
Turn off the air conditioner when
a power failure occurs. When the
power is restored, wait 3 minutes,
and then on the air conditioner.
Check if the circuit breaker has
tripped.
The air conditioner turned off
Press the power button again.
automatically at a preset time.
TROUBLESHOOTING
Possible causes
Corrective action
Air is not circulating properly.
Make sure that there are no curtains, blinds or furniture blocking
the front of the air conditioner.
The Air filter is dirty.
Clean the Air filter once every 2
weeks. See “Cleaning Air filter”
for more information.
In summer, it may take some time
to cool indoor air. In this case,
The room temperature is too high.
select the jet cool operation to
cool indoor air quickly.
Make sure that no cold air is
Cold air is escaping from the room. escaping through ventilation
The air conditioner does not
points in the room.
generate cool air.
Set the desired temperature to
The desired temperature is higher
a level lower than the current
than the set temperature.
temperature.
Avoid using a heat generator
such as an electric oven or a gas
There is a heating source nearby.
burner while the air conditioner
is in operation.
In the air circulation operation,
air blows from the air conditioner
Air circulation operation is selected. without cooling or heating the
indoor air. Switch the operation
mode to the cooling operation.
In some operation modes, such as
the jet or dehumidifying operation
The auto operation, jet operaIt is not possible to adjust the
modes, you cannot adjust the
tion or dehumidifying operation
fan speed.
fan speed. Select an operation
is selected.
mode in which you can adjust
the fan speed.
In some operation modes, such
as the air circulation or jet operaIt is not possible to adjust the The air circulation operation or tion mode, you cannot adjust the
temperature.
jet operation is selected.
temperature. Select an operation
mode in which you can adjust the
temperature.
ENGLISH
ENG
Problem
19
Rev : 04 (01T15)
Download PDF

advertising