LG | 14SA2RB | LG 14SA2RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Chassis : CP-079C
P/No. : MFL61997502 (02)
Important Precautions
2
Important Precautions
3
Location and function of controls
1
POWER
MUTE
TV/AV
9
10
EYE/*
ARC/*
Q-VIEW
LIST
4
13
11
6
1
2
3
4
5
6
8
9
2
7
0
3
15
MENU
MM/*
PR
5
OK
VOL
VOL
PR
16
FAVOURITE
I/II/*
XDP/*
SLEEP
SSM/*
14
8
PSM
7
17
12
(option-1)
POWER
MUTE
9
1
2
3
1
5
2
6
4
8
9
7
PSM
0
TV/AV
7
10
MENU
3
PR
5
VOL
OK
VOL
PR
13
EYE/*
ARC/*
Q-VIEW
LIST
6
11
4
14
12
15
SLEEP FAVOURITE XDP/*
MM/*
8
All the functions can be controlled with the remote control
handset. Some functions can also be adjusted with the
buttons on the front panel of the set.
Remote control handset
Before you use the remote control handset, please install
the batteries. See the previous page.
1. POWER
switches the set from On to standby or standby to On.
2. NUMBER BUTTONS
switches the set On from standby or directly select a
Programme number.
3. MENU
selects a menu.
4. EYE / * (option)
switches the eye function On or Off.
5.
/ (Programme Up/Down)
selects a programme or a menu item.
switches the set On from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK accepts your selection or displays the current
mode.
6. Q. VIEW
returns to the previously viewed programme.
7. PSM (Picture Status Memory)
recalls your preferred picture setting.
8. XDP/*
Select excellent Digital picture.
9. MUTE
switches the sound On or Off.
10. TV/AV
selects TV or AV mode.
switches the set On from Standby.
11. LIST
displays the programme table. press LIST key again
to clear the LIST table from the screen.
12. SLEEP
sets the sleep timer.
13. ARC/* (option)
change picture format (Normal/Zoom).
14. FAVOURITE
pressing each time this button will select a stored
favourite programme.
15. MM / * (option)
select music mode.
COLOURED BUTTONS : When Menu is On some of these
buttons are used for programme edit in programme edit
window
Remarks : 1. Some keys in remote can be non-functional,
these keys are used in other models.
# Remote Design / Aesthetic may vary from model
to model.
(option-2)
4
Location and function of controls
Shown below is a simplified representation of front panel, here shown may be
somewhat different from your set.
MENU OK /
ON/OFF
1
2 3
4
5A
PR
VOL
5B
1. MAIN POWER (ON/OFF)
switches the set On or Off.
2. REMOTE CONTROL SENSOR
3. POWER/STANDBY INDICATOR
Illuminates brightly when the set is in standby mode
dims when the set is switched On
4. MENU
selects a menu.
5A. OK /
It accepts your selection when it is in menu.
Otherwise it selects input (TV or AV)
5B.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
(Programme Up/Down)
selects a programme or a menu item.
switches On the set from standby.
5
Basic operation
On and Off
1. Press the main power button to switch the set On.
2. If the set is in standby mode, press the POWER,
TV/AV or NUMBER buttons on the remote control
handset to switch it On fully.
3. Press the POWER button on the remote control
handset.
The set reverts to standby mode.
4. Press the main power button again to switch the set
Off.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
Note : while the set is switched On and mains plug is
disconnected, if mains plugged again then set will switch
to standby or power On.
I/II/*
XDP/*
SLEEP
SSM/*
Programme selection
You can select a programme number with the
or NUMBER Buttons.
Volume adjustment
Press the
button to adjust the volume.
Quick view
Press the Q.VIEW button to view the last programme
Mute function
Press the MUTE button. The sound is switched Off and
the display
appears.
You can cancel it by pressing the MUTE,
button.
On screen language selection (option)
The menu can be displayed on the screen in desired
language.
First select your language.
1. Press the MENU button and then
button to select the
special menu.
2. Press the button after selecting language by pressing
button.
3. Press the
button to selects the desired language.
All the On screen display will appear in the selected
language.
4. Repeatedly press the MENU button to return to normal TV
viewing.
6
On screen menus
The dialogue between you and your set takes place on
screen with an operator menu. The buttons required
for the operating steps are also displayed.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
Menu selection
1. Press the MENU button and then
button to display
each menu.
2. Press the
button and then
button to select a
menu item.
3. Press the button to display the sub menu or the pulldown menu.
4 Change the setting of an item in the sub or pull-down
menu with
or
.
You can move to the higher level menu with OK button
and to move to the lower level menu press the button.
Note :
a. In the AV mode the Programme Menu is not displayed.
b. In sound menu woofer is optional (In some models)
Programme
Auto programme
22
0
MENU
MM/*
PR
VOL
OK
VOL
Manual programme
Picture
CSM
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
Sound
Programme edit
or
Time
Special
7
Setting up TV stations
Programme
Up to 200 programmes can be stored by programme
numbers (0 to199). Once you have preset the
stations you will be able to use the
or NUMBER
buttons to scan the stations you programmed.
Programmes can be tuned using automatic or
manual modes.
Note : In some models up to 100 TV stations can be
stored.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
Auto programme tuning
All channel that can be received are stored by this
method.It is recommended that you use auto programme
during installation of this set.
LIST
1
2
3
4
5
6
7
8
9
1 . Press the MENU button and then
button to select
the Programme menu.
2. Press the button and then
button to select Auto
programme.
3. Press the
button to display the Auto programme
menu.
Auto Programme
0
MENU
22
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
4. Press the
button to select Storage from.
5. Select the beginning programme number with the
button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is
entered with a numeric '00' in front of it, i.e. '005' for5.
6. Press the
button to select the start.
7. Press the
button to begin auto programming. All
receivable stations are stored. To stop auto
programming, press the MENU button.
When auto programming is completed the Programme
edit menu appears on the screen. See the 'Programme
edit' section to edit the stored programme.
8. Press the MENU button to return to normal TV viewing.
8
Setting up TV stations
Programme
Manual programme tuning
Manual programme offer you to manually tune and
arrange the programme in whatever order you desire.
Also you can assign a programme name with five
characters to each.
POWER
MUTE
TV/AV
POWER
MUTE
1. Press the MENU button and select the Programme
menu.
2. Press the
button and then
button to select
Manual programme.
3. Press the
button to display the Manual programme
menu.
Manual programme
EYE/*
ARC/*
2Q-VIEW
LIST
3
1
5
4
1
63
2
8
47
5
96
PSM
0
TV/AV
9
8
7
MENU
0
PR
MENU
PR
OK
VOL
ARC/*
FAVOURITE
PSM
VOL
OK
PR
VOL
EYE/*
MM/*
PR
VOL
Q-VIEW
LIST
I/II/*
XDP/*
SLEEP
SSM/*
SLEEP FAVOURITE XDP/*
MM/*
4. Press the
button to select Search. Press the
button to commence searching on the Search
pull-down menu. If a programme is found the search
will stop. Press OK button to store the programme. If
programme reception is poor go for fine tunning.
5. If this station is the one required, press the
button
to select Storage. Select the desired programme
number (0 to 199) with the
button or NUMBER
buttons on the Storage. pull-down menu. Any number
under 10 is entered with a numeric '00' in front of it, i.e.
'005' for 5. Press OK button to store the programme.
6. Press the
button to select System. Select a TV
system with the
button on the System pull-down
menu;
BG : (India/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
7. Press the
button to select Channel. Press the
button to select V/UHF or Cable on the Channel
pull-down menu.
If possible, select the channel number 1 to 69 (V/UHF)
and 1 to 47 (cable) directly with the number buttons,
Any number under 10 is entered with a numeric '0' in
front of it i.e. '05 'for5.
8. Press the OK button to store it. The display Stored will
appear.
9. To store another station, repeat steps 4 & 5.
9
Setting up TV stations
Programme
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
Assigning a programme name
1. Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the
button to select Name.
3. Press the button on the Name pull-down menu. You
can use a blank, +, -, the numeric 0 to 9 and the
alphabet A to Z.
With the button you can select in the opposite
direction.
4. Select the next position by pressing the button and
then take your choice of the second character, then
press OK button.
5. Repeat the 'Manual programme tuning' steps 5 to 8.
6. Repeatedly press the MENU to return to normal TV
viewing.
Fine tuning
Normally fine tuning is only necessary if reception is poor.
1. Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the
button to select Fine.
3. Press the
button to fine tune for the best picture
and sound on the Fine pull-down menu, then press OK
button to store the setting.
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
4. Repeatedly press the MENU button to return to normal
TV viewing.
5. Change of “
” from Yellow to red indicates tuning
is proper.
10
Setting up TV stations
Programme
Programme edit
This function enables you to delete, skip or copy the
stored programmes. Also you can move some stations to
other programme numbers.
G
1. Press the MENU button and then
button to select
the Programme menu.
2. Press the button and then
button to select
programme edit.
3. Press the
button to display the Programme edit
menu.
Programme edit
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
Deleting a programme
1. Select a programme to be deleted with the
or
button.
2. Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
Copying a programme
1 . Select a programme to be copied with the
or
button.
2. Press the GREEN button.
All the following programmes are shifted down one
position.
Moving a programme
1. Select a programme to be moved with the
or
button.
2. Press the YELLOW button.
3. Move the programme to the desired programme
number with the
or
button.
4. Press the YELLOW button again to release this
function.
Programme edit
Skipping a programme number
1. Select a programme number to be skipped with the
or
button.
2. Press the BLUE button. The skipped programme turns
to blue.
3. Press the BLUE button again to release the skipped
programme.
When a programme number is skipped it means that
you will be unable to select it using the
button
during normal TV viewing. If you want to select the
skipped programme, directly enter the programme
number with the NUMBER buttons or select it in the
programme edit or table menu. Skipped prog. No.
appears BLUE.
Repeatedly press the MENU to return to normal TV
viewing.
11
Setting up TV stations
Favourite Prog.
This function lets you select your favourite programmes
directly.
1. Press the MENU button and then
button to select
the Programme menu
2. Press the
button and then
button to select
Favourite Prog.
3. Press the OK button to display the Favourite Prog.
menu.
Programme
POWER
MUTE
EYE/*
ARC/*
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
4. Press the
button to select Favourite Prog.
5. Select a desired programme with the
button
or NUMBER buttons. Any number under 10 is entered
with a numeric '00' in front of it i.e '005' for 5.
6. To store another programme repeat steps 5 to 6.
You can store up to 8 programmes.
7. Repeatedly press the MENU or
button to return to
normal TV viewing.
MM/*
Repeatedly press the FAVOURITE KEY button to select
stored favourite programmes.
PR
VOL
G
TV/AV
OK
list
VOL
list.
PR
list
FAVOURITE
I/II/*
XDP/*
SLEEP
SSM/*
list
list
PSM
list
list
list
list
list
12
Picture adjustment
PSM (Picture Status Memory)
1. Press the PSM button on the remote to change
for desired PSM setting.
Note: PSM status change to user automatically when
contrast, brightness, colour and sharpness set manually.
You can also recall a desired picture (Dynamic, Standard,
Mild Game, or User) with PSM button on the remote
control. The picture Dynamic, Standard, Mild and Game
are programed for good picture reproduction at the factory
and cannot be changed.
CSM (Colour Status Memory)
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
CSM.
LIST
CSM
1
2
3
4
5
6
7
8
9
Reddish
Greenish
Bluish
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
Picture adjustment
You can adjust picture contrast, brightness, colour
intensity, sharpness and Tint (NTSC input only) to the
levels you prefer.
1. Press the MENU button and then
button to select
the Picture menu.
2. Press the
button and then
button to select
Contrast, Brightness, Colour, Sharpness or Tint.
Picture
CSM
3. Press the
button to make appropriateadjustments
on each sub menu.
CONTRAST
You can also select User or standard PSM setting by
directly pressing PSM button.
4. Press the OK button to store it for the picture User.
5. Repeatedly press the MENU button to return to normal
TV viewing.
Excellent digital picture selection (option)
When this function is On, picture quality will be enhanced.
Repeatedly press the XDP/* button to switch On or Off.
Note : If you press the PSM or EYE/ * button with the XDP/*
function, the excellent digital picture function is automatically
switched Off.
13
Sound adjustment
Sound
AVL (Auto Volume Leveler)
If you select AVL On, the set automatically keeps On an
equal volume level even if you change programmes.
1. Press the MENU button and then
button to select
the Sound menu.
2. Press the button and then
button to select AVL.
3. Press the
button to select On or Off on the AVL.
Pull-down menu.
4. Repeatedly press the MENU button to return to normal
TV viewing.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
Music Mode (option)
0
MENU
MM/*
PR
VOL
OK
Volume adjustment
You can adjust Volume.
1. Press the MENU button and select the Sound menu.
2. Press the button and then
button to select
volume.
3. Make desired adjustment with the
on the volume
OSD.
4. After adjustment the volume OSD will Disappear.
VOL
You can hear music while the TV screen is Off using the
function.
1. Press the MM/* button to start the music mode.
2. Press any key to exit from Music Mode except MM/*
key & Vol. keys
PR
Music Mode On
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
3. Volume level can be changed (Vol+/Vol-) in music
mode.
14
Time functions
Time
1
2
3
Time functions
The time uses 24 hrs. system and must be set to the
correct time before operating the set.
1. Press MENU to select Time menu .
2.
and
key select time function.
3. After selecting ‘Time Function’ press key to enter ‘Time’.
4. Set Time using
and
keys.
5. Press OK to store.
6. Repeatedly press MENU to return to normal TV
viewing.
Note :
a. In the event of power interruption, time must be reset.
b. Time resets if mains is unplugged.
c. Timer accuracy is ± 15 sec.
On/Off Time
By using this function in On mode the set automatically
switches On or Off at a preset time. You must set the time
correctly before using On/Off time function.
4
5
6
Off Time
7
8
9
1. Press the MENU button and then
,
button to
select the Time menu.
2. Press the button and then
button to select Off
Time.
3. Press OK
4. Press the
button to select Off Time On or Off.
5. Press the
button.
6. Select and adjust hour and minute by pressing the
,
button.
7. Repeatedly press the MENU or button to return to
normal viewing.
On Time
1. Press the MENU button and then
button to select
the Time menu.
2. Press the button and then
button to select On Time.
3. Press OK
4. Press the
button to select On Time On or Off
5. Press the button.
6. Select and adjust hour and minute by pressing the
,
button.
Auto sleep
If you select Auto Sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV station stops Broadcasting.
1. Press the MENU button and then
button. to select
the Time menu.
2. Press the
button and then
button to select
Auto Sleep.
3. Press the
and
button to select On.
4. Repeatedly press the MENU or button to return to
normal TV viewing.
Note :
a. ON Time function works only in standby mode.
b. To cancel the set On/Off time, set the On/Off timer to --:--.
c To view the remaining On/Off time select the Time menu.
d. When you switch the main power Off, the Time is reset
and the On/Off time is Off.
e. Timer accuracy is 15 sec.
15
--:--
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
Special functions
On screen language selection (option)
The menu can be displayed on the screen in desired
language. First select your language.
Special
1. Press the MENU button and then
button to select
the Special menu.
2. Press the button and then the
button to select
language
3. Press OK button.
All the On screen displayed will appear in the selected
language.
4. Repeatedly press the MENU or
Button to return
normal TV viewing.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
I/II/*
XDP/*
SLEEP
SSM/*
TV and AV modes / Input (option)
Input can be set to TV or AV mode. AV mode is used when a
DVD, or other equipment connected to the set.
Note: When a VCR is connected via the aerial socket; the
set is used in TV mode. See the connection of external
equipment’ section.
1. Press the menu button and then
button to select
the special menu.
2. Press the
button and then
button to select
Input.
3. Press the
and
button select TV, AV
Note: Avoid giving input at Lout or R out socket on the back
of the set.
To return TV mode, press the
or NUMBER button.
Alternatively you can select th TV or AV mode by pressing
the TV/AV button
Child lock
When Child lock is ON, Remote control handset is needed to
control the functions. This feature can be used to prevent
unauthorized viewing.
1. Press the MENU button and the
button to select
the special menu.
2. Press the button and then
button to select the
child lock.
3. Press the
and
button on the remote control
handset to select On.
4. Repeatedly press the MENU or
button to return to
normal TV viewing.
With the lock On, the display Child Lock On appears on the
screen if any button on the front panel is pressed while
viewing the TV.
16
Other functions
Special
Blue back
If you select On in the Blue back pull-down menu, the blue
background appears on the screen when there is no
signal or poor signal.
POWER
MUTE
EYE/*
ARC/*
TV/AV
Q-VIEW
LIST
1
2
3
4
5
6
7
8
9
0
MENU
MM/*
PR
VOL
OK
VOL
PR
FAVOURITE
PSM
1. Press the MENU button and then
button to select
the Special menu.
2. Press the
button and then
button to select
Blueback.
3. Press the
button to select On or Off on the Blue
back pull-down menu.
4. Repeatedly press the MENU button to return to
normal TV viewing.
I/II/*
XDP/*
SLEEP
SSM/*
Note : a. The blue background automatically appears on
the screen when there is no signal in TV mode.
b. If any OSD appears on screen, blue back will go Off.
Sleep timer
You don't have to remember to switch the set Off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
Press the SLEEP button to select the number of minutes.
The display - - - will appear on the screen, followed by
10, 20, 30, 60, 90 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
Note :
a. To view the remaining sleep time, press the SLEEP
button once.
b. To cancel the sleep time repeatedly press the SLEEP
button until the display - - - appears.
c. When you switch the set off, the set releases the
preset sleep time.
Picture format (ARC) (option)
You can watch TV in various picture formats; Normal,
Zoom.
Repeatedly press the ARC button to select your desired
picture format.
Normal (4:3)
This picture format is 4 : 3 of general TV.
Zoom (14:9)
You can enjoy the cinema in a vast screen through the
Zoom mode. The screen 4:3 is magnified to the
upper/lower sides so that the screen 16:9 is full. The
bottom and top of the picture may be lost.
Note :
a. When you switch the set to Off, Zoom picture format
is reset to the Normal (4:3).
b. In the 1/2 size sub picture and vertical four sub
picture of PlP mode the picture format is not
available.
c.This menu will appear only in English.
17
Connection of external equipment
You can connect additional equipment, such as VCRs,
camcorders etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial
socket on the back of the set.
2. Connect the aerial cable to the RF aerial in socket of
the VCR.
3. Store the VCR channel on a desired programme
number using the 'Manual programme tuning' section.
4. Select the programme number where the VCR
channel is stored.
5. Press the PLAY button on the VCR.
Audio Video in/out sockets
1. Connect the audio/video out sockets of the VCR to
audio/video in sockets of the set and in sockets of the
VCR to out sockets of the set.
2. If the VCR is connected to the AV sockets on the set,
press the TV/AV button to select AV.
3. Press the PLAY button on the VCR. The VCR
playback picture appears on the screen.
You can also record programmes received by the TV
on video tape via audio/video out sockets.
18
Troubleshooting check list
Symptoms
No picture, no sound
Sound OK, poor picture
Picture OK, poor sound
Picture blurred
Lines or streaks in picture
Poor reception on some channels
No colour
Poor colour
Remote control does not work
Check following items and try
to adjust these
The mains plug-(plugged in and
switched On)
Is the TV switched On
Try another channel (weak signal)
Check aerial (plugged into TV?)
Check aerial (broken lead?)
Check aerial
Check for local interference
Adjust contrast
Adjust brightness
Adjust colour
Adjust volume
Check the batteries in remote control
Check Audio/Video sockets (VCR only)
NOTE :
i) Colour patch might appear in your TV set if you rotate or shift the position of the set
while it is On or in standby mode. If patch appears in your TV set try the following
before calling your service centre or dealer. Place the TV set in desired position and
switch it Off by the main power switch. Allow the set tocool down for at least 30
minutes and then switch it On. The degaussing circuit (inbuilt) in your set will
remove the patch automatically. Please call service only in case this operation does
not help.
ii) In case of no sound on all channels, check for system.
19
LG Electronics
Download PDF

advertising