LG | 22LK311 | LG 22LK311 Owner’s Manual

User’s Guide Specification
담 당
CM Yang
11.01.03
1. Model Description
MODEL
22/26/32LK310-TA
BRAND
LG
Part No.
SUFFIX
2.
TR
Product Name 22/26/32LK310
관 리 자
EH Hong
11.01.03
JO Kim
11.01.03
MFL66100430
(1101-REV01)
Printing Specification
1. Trim Size (Format) : 185mm x 260 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Uncoated paper , 백상지 60 g/㎡
• Inside : Uncoated paper , 백상지 60 g/㎡
4. Printing Method : Off-set
5. Bindery : Saddle stitch
6. Language : English (1)
7. Number of pages : 24
N
O
T
E
S
3.
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Special Instructions
(1) Origin Notification
* LGEIN : Printed in Indonesia
* LGESP : Printed in Brazil
* LGEND : Printed in China
* LGEMA : Printed in Poland
4.
* LGEWA : Printed in U.K.
* LGEMX : Printed in Mexico
* LGEIL : Printed in India
Changes
10
9
8
7
6
5
4
3
2
1
REV.
NO.
Jan/13/11
MM/DD/YY
CM YANG
SIGNATURE
S0-16722
CHANGE NO.
Update the accessories and apparatus of LV2130-TD ser.
CHANGE
CONTENTS
P/NO. MFL66100430
Total pages : 24 pages
Pagination sheet
Front
Cover
(EN)
P/NO.
Back
Cover
2
…
…
…
…
23
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO: MFL66100430(1101-REV01)
Printed in Korea
www.lg.com
Safety Instructions
• Please read these safety precautions carefully before using the product.
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
ENGLISH
warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
caution
If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precaution in Installing the Product
warning
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Do not use the product in damp place such as
a bathroom or any place where it is likely to get
wet.
- This may cause a fire or could give an electric
shock.
If you can smell smoke or other odors or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
caution
Install the product on a flat and stable place
that has no risk of dropping the product.
- If the product is dropped, you may be
injured or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.
- Ventilation required.
Electrical Power Related Precautions
warning
Make sure to connect the power cable to the
grounded current.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered
with dust, dry the power plug completely or
wipe dust off.
- You may be electrocuted due to excess
moisture.
During a thunder or lightning storm, unplug
the power cable or signal cable.
- You may be electrocuted or a fire can break
out.
caution
2
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off
this unit by SWITCH.
Precautions in Moving the Product
warning
Make sure to turn off the product.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product
can be damaged.
caution
Do not shock the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
- If you drop the product, the damaged
product can cause electric shock or fire.
Contact with the service center for repair.
Precautions in Using the Product
warning
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-W
hen a fixed image (e.g. logos, screen menus, video game,
computer display and teletext pages) is displayed on the television for an extended period it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or
“burn-in”. Image burn is not covered under the manufacturer’s
warranty.
- In order to prevent image burn, avoid displaying a fixed image on
your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
- Image burn can also occur on the letterboxed areas of your
television if you use the 4:3 aspect ratio setting for an extended
period.
Preparation
■ Image shown may differ from your TV.
2
AV IN1
VIDEO L(MONO) AUDIO R
ENGLISH
Connecting your Unit
VCR CONNECTION
RS-232C IN
(CONTROL)
RGB IN (PC)
2
VIDEO L(MONO) AUDIO R
/DVI IN
3 Power Cord
VIDEO
AUDIO
COMPONENT IN
1
VIDEO
AV IN1
L - AUDIO OUT - R
1
AUDIO IN
(RGB/DVI)
ANTENNA
IN
Antenna Connection
AUDIO
COMPONENT IN
2
DVD/STB
* To connect an additional equipment, see the External Equipment Setup section in CD
Manual.
3
Preparation
ENGLISH
Accessories
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
This item is not included for all models.
Owner’s Manual
Power Cord
(Except 32LV2***)
Polishing Cloth
Polishing cloth for use on the screen.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Batteries
(AAA)
Remote Control
Do not use excessive force. This may
cause scratching or discolouration.
Only 26/32LK3**, 32/42LK4**
x8
1-screw for stand fixing
(Only 26/32LK3**, 32/42LK4**,
32LV2***)
Only 22LK3**
Cable Holder
(Only 22LK3**,
19/22/26/32LV2***)
M4 x 20
Bolts for stand
assembly
Only 19/22/26LV2***
x8
M4 x 16
Bolts for stand
assembly
AC/DC Adaptor
Wall Mounting Bracket (Separate purchase)
4
Protection cover
Only 32LV2***
x2
Protection cover
or
LSW100B or LSW100BG
LSW200B or LSW200BG
(19/22/26/32LV2***,
22/26/32LK3**, 32LK4**)
(42LK4**)
M4 x 14
Bolts for stand
assembly
ENGLISH
!
Front
panel controls
! NOTE
?►►The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
?
CAUTION
►►Do not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
►►Do not drag the TV. The floor or the product may be damaged.
P
■ Image shown may differ from your TV.
Only 22/26/32LK3**
Only 22LK3**
POWER
INPUT
INPUT
INPUT
HOME
HOME
HOME
OK
OK
OK
VOLUME
PROGRAMME
P
P
Only 26/32LK3**
P
INPUT
HOME
OK
P
PROGRAMME
P
IN
INPUT
HOME
OK
VOLUME
SPEAKER
OK
OK
OK
HOME
HOME
Remote Control Sensor
Power/Standby Indicator
HOME
INPUT
INPUT
INPUT
POWER
(Can be adjusted using the Power Indicator
in the OPTION menu.)
5
Preparation
ENGLISH
Front panel controls
■ Image shown may differ from your TV.
Only 32/42LK4**
P
P
PROGRAMME
OK
HOME
P
VOLUME
INPUT
OK
OK
SPEAKER
HOME
OK
HOME
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
6
INPUT
HOME
INPUT
INPUT
POWER
ENGLISH
■ Image shown may differ from your TV.
Only 19/22/26/32LV2***
PROGRAMME
VOLUME
OK
HOME
INPUT
POWER
Touch Sensor
• You can use the desired
button function by
touching.
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
7
IN
/DVI IN
ANTENNA
IN
AUDIO
VIDEO
COMPONENT IN
Preparation
ENGLISH
Back panel information
■ Image shown may differ from your TV.
Only 22LK3**
Only 26/32LK3**
26/32LD340
RS-232C IN
(CONTROL)
AUDIO IN
(RGB/DVI)
2
10
RGB IN (PC)
VIDEO
L/MONO AUDIO
R
/DVI IN
1
1
AV IN1
1
ANTENNA
IN
AUDIO
VIDEO
COMPONENT IN
2
3
4
5
8
1
2
3
8
6
7
2
9
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
4
RGB Input
Connect the output from a PC.
5
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
3
4
AV IN2
5
6
8
7
9
6
RGB/DVI Audio Input
Connect the audio from a PC.
7
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
8
Component Input
Connect a component video/audio device to these
jacks.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Connect USB storage device to this jack.
USB IN
ENGLISH
■ Image shown may differ from your TV.
Only 32/42LK4**
H/P HDMI IN 3
10
2
4
6
3
8
7
2
VIDEO L/MONO AUDIO R
1
AV IN 2
OUT
2
(RGB)
(DVI)
9
5
1
2
3
4
5
Power Cord Socket
This TV operates on an AC1 power. The voltage is
indicated on the Specifications page. Never
HDMI / DVI IN
attempt to operate the TV on DC
power.
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB Input
Connect the output from a PC.
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
6
RGB/DVI Audio Input
Connect the audio from a PC.
7
Audio/Video Input
ANTENNA IN
Connect audio/video output from an external
device to these jacks.
8
Component Input
Connect a component video/audio device to these
jacks.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Connect USB storage device to this jack.
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
9
Preparation
ENGLISH
Back panel information
■ Image shown may differ from your TV.
Only 19/22/26LV2***
Only 32LV2***
9
9
1
1
10
2
5
6
3
7
1
2
5
6
3
7
DC-IN
2
(DVI)
2
4
1
RGB Input
Connect the output from a PC.
3
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
5
10
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
2
4
8
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
RGB/DVI Audio Input
Connect the audio from a PC.
(DVI)
4
8
6
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
7
Component Input
Connect a component video/audio device to these
jacks.
8
Antenna Input
Connect RF antenna to this jack.
9
USB Input
Connect USB storage device to this jack.
10
DC ADAPTER PORT
Connect to the power cord socket.
■■ Image shown may differ from your TV.
■■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the
bolt can deviate from abrasion of the tightening part of the bolt.
Only 22LK3**
1
2
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
ENGLISH
Stand installation
Only 26/32LK3**, 32/42LK4**
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
Assemble the TV as shown.
Stand Body
M4 x 20
Stand Base
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
M4 x 20
11
Preparation
ENGLISH
Stand installation
Only 19/22/26LV2***
Only 32LV2***
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
Stand Body
M4 x 14
Stand Body
Stand Base
3
Assemble the TV as shown.
3
Assemble the TV as shown.
4
Fix the 2 bolts securely using the holes in the
back of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
M4 x 16
12
Stand Base
M4 x 14
■ Image shown may differ from your TV.
Only 22LK3**
Only 26/32LK3**, 32/42LK4**
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
1
Connect the cables as necessary.
2
Open the Cable Management Clip as
shown and manage the cables.
ENGLISH
Back Cover for Wire Arrangement
To connect additional equipment, see the
External Equipment Setup section.
Cable Holder
Only 19/22/26/32LV2***
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
Cable Management Clip
Cable Holder
3
Fit the Cable Management Clip as shown.
NOTE
►►Do not use the Cable Management Clip to lift the TV.
-If the TV is dropped, you may be injured or the
TV may be damaged.
13
Preparation
ENGLISH
Not using the desktype stand
■■ Image shown may differ from your TV.
Only 26/32LK3**, 32/42LK4**
Insert the Protection Cover into the TV until
clicking sound.
When installing the wall-mounted unit,use the protection cover.
Only 22LK3**
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Protection Cover
Swivel stand
(Only 26/32LK3**, 32/42LK4**)
■ Image shown may differ from your TV.
■ This feature is not available for all models.
2
Loose the bolts from TV.
3
Detach the Stand from TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.
POSITIONING YOUR
DISPLAY (Only 22LK3**)
4
After removing the protection paper from
the protection cover, adhere it to the TV as
shown.
Protection Cover
14
■ Image shown may differ from your TV.
Adjust the position of the panel in various ways
for maximum comfort.
• Tilt range
■ Image shown may differ from your TV.
■ This feature is not available for all models.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product. Use only
an attached screw.
Careful installation
advice
■ You should purchase necessary components to fix
the TV safety and secure to the wall from the market.
■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
ENGLISH
ATTACHING THE TV TO A
DESK (Only 26/32LK3**, 32/42LK4**, 32LV2***)
■ The instructions shown below are a safer way to set
up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent
the TV from falling forward and causing injury. This
will also prevent the TV from damage. Ensure that
children do not climb or hang from the TV.
1
1-Screw (provided as parts of the product)
Stand
1
1
2
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Desk
2
WARNING
Secure the wall brackets with the bolts on the wall. Match
the height of the bracket that is mounted on the wall.
►►To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the
machine may cause injury.
3
Connection of TV
(Only 19/22/26LV2***)
■■ Image shown may differ from your TV.
3
DC IN
AC/DC Adaptor
1
Connect the antenna cable to the antenna
input port on the TV.
2
Connect the AC/DC adapter plug to the
power input jack on the TV.
3
Connect the power cord to the AC/DC
adapter first, then plug the power cord into
the wall power outlet.
Use a sturdy rope to tie the product for alignment.
It is safer to tie the rope so it becomes horizontal
between the wall and the product.
! NOTE
►►When moving the TV undo the cords first.
►►Use a platform or cabinet strong and large enough
? to support the size and weight of the TV.
►►To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the same.
15
Preparation
ENGLISH
Earthing
10 cm
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
10 cm
10 cm
10 cm
10 cm
NOTE
Power Supply
Circuit breaker
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
Desktop Pedestal
Installation
For adequate ventilation allow a clearande of 10 cm
(4 Inches) all around the TV.
►►Should Install wall mount on a solid wall perpendicular to the floor.
►►Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
►►The surface that wall mount is to be mounted on
should be of sufficient strength to support the weight
of TV set; e.g. concrete, natural rock, brick and hollow block.
►►Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions included with the mount.
►►LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount
is used.
- I Incorrect fastening of screws to surface
which may cause TV to fall and cause
personal injury
- Not following the recommended Installation
method.
10 cm
A
B
10 cm
10 cm
10 cm
Model
Wall Mount :
Horizontal installation
■■ We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
■■ We recommend that you purchase a wall mounting
bracket which supports VESA standard.
■■ LG recommends that wall mounting be performed
by a qualified professional installer.
16
22LK3**
26LK3**
32LK3**
32LK4**
42LK4**
19LV2***
22LV2***
26LV2***
32LV2***
VESA
(A * B)
100 * 100
200 * 100
200 * 100
200 * 100
200 * 200
100 * 100
100 * 100
100 * 100
200 * 100
Standard Quantity
Screw
M4
M4
M4
M4
M6
M4
M4
M4
M4
4
4
4
4
4
4
4
4
4
■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
■■ For optimum picture quality, adjust antenna direction.
■■ An antenna cable and converter are not supplied.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
ENGLISH
Antenna Connection
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 Ω)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
VHF
■■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
17
Watching TV / Programme control
Remote control key function
ENGLISH
■ Image shown may differ from your TV.
When using the remote control, aim it at the remote control sensor on the TV.
1
5
1
POWER
Switches the TV on from standby or off to standby.
2 volume up / down
Adjusts the volume.
3 Home
Select a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
6
7
2
3
4
Home
8
4 thumbstick(Up / Down / Left / Right)
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
ok
Accepts your selection or displays the current mode.
5 input
External input mode rotate in regular sequence.
Switches the TV on from standby.
6 q. view
Returns to the previously viewed programme.
7 programme up/down
Selects a programme.
8 q. menu
Select the desired quick menu source.
Installing Batteries
■ Open the battery compartment cover on the back and
install the batteries matching correct polarity (+with
+,-with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used
batteries with new ones.
■ Close cover.
■ To remove the batteries, perform the installation a
actions in reverse
18
ENGLISH
Turning on the TV
-When your TV is turned on, you will be able to use its features.
connect
the power cord correctly.
S-VIDEO
VIDEO
1ANT OUTFirstly,
L
R
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
button on the TV or press the
POWER,
INPUT, P
or NUMBER button on the remote control
OUTPUT
26/32LD330and the TV will switch on.
ANT IN
SWITCH
RS-232C IN
(CONTROL)
Initializing Setup
AUDIO IN
(RGB/DVI)
2
If the OSD (On Screen Display) is displayed on the screen after turning on theRGBTV,
can
IN (PC)you
VIDEO
L(MONO)
1
adjust the Language, Mode Setting, Auto Tuning.
AUDIO
R
/DVI IN
Note:
a.If you close without completing the initial setting, the Initial Setting menu can be displayed again.
AUDIO
b.“Store Demo” mode is only for shop display and not for general customer use. VIDEO
COMPONENT IN
c."Home Use” mode is the optimal setting for home environments, and is the TV's default
mode.
d."Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store Demo” mode initializes the product to the image quality set by us after a certain
RS-232C IN
period of time.
USB IN
(CONTROL)
ONLY
e.The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION SERVICE
menu.
1 Connect
the USB device to the USB IN
jack on the TV.
USB memory stick
2
Select PHOTO LIST, MUSIC LIST or
MOVIE LIST.
PHOTO LIST
3
MUSIC LIST
MOVIE LIST
RGB IN (PC)
VIDEO
/MONO
AUDIO
/DVI IN
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
R
AV IN1
1
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu is activated.
In USB device, you can not add a new folder or delete the existing folder.
■ Image shown may differ from your TV.
ANTENNA
IN
AUDIO IN
(RGB/DVI)
2
When connecting a USB device
AV IN1
1
USB IN
SERVICE ONLY
ANTENNA
IN
• This TV Supports on JPEG and MP3 and SD
DivX.
When removing the USB device
Select the USB Device menu before removing
the USB device.
1
Select Eject.
2
19
AV IN2
Watching TV / Programme control
ENGLISH
On Screen Menus Selection and adjustment
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
■ Image shown may differ from your TV.
SETUP
Move
OK
Auto Tuning
PICTURE
Move
Aspect Ratio
Manual Tuning
Energy Saving
Programme Edit
OK
: 16:9
AUDIO
Move
Auto Volume
: Off
Clear Voice II
: Off
Picture Mode
: Vivid
• Level
• Backlight
100
Balance
• Contrast
100
Sound Mode
: Standard
• Brightness
50
• Infinite Surround : Off
• Sharpness
70
• Treble
50
• Colour
70
• Bass
50
▼
TIME
Move
OK
3
-
+
0
L
R
▼
SETUP
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Move
Menu Language
Clock
OK
: Off
: English
OK
USB
Move
Photo List
Off Time
: Off
Input Label
On Time
: Off
SIMPLINK
: On
Movie List
Sleep Timer
: Off
Key Lock
: Off
DivX Reg. Code
Set ID
:1
Deactivation
Music List
Power Indicator
Demo Mode
: Off
Mode Setting
: Home Use
▼
1
2
3
Display each menu.
Select a menu item.
Move to the pop up menu.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
20
OK
Auto programme tuning
SETUP
Move
OK
SETUP
Auto Tuning
Tuning
Auto
Manual Tuning
Auto Tuning
Programme Edit
Programme Edit
Move
Select SETUP.
2
Select Auto Tuning.
3
OK
Manual Tuning
Check your antenna connection. The
previous channel information will be
updated during Auto Tuning.
Yes
1
ENGLISH
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
No
• If you wish to keep on auto tuning select Yes
using the < >button. Then, press the OK button. Otherwise select No.
Select Yes.
4
Run Auto tuning.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost
dry, and then use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before
switching on.
!
Cleaning
the Cabinet
■■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■■ Do not to use a wet cloth.
?
Extended Absence
CAUTION
►►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
21
appendix
ENGLISH
Troubleshooting
The TV does not operate properly.
The remote control
does not work
■■ Check to see if there is any object between the TV and the remote control
causing an obstruction. Ensure you are pointing the remote control directly
at the TV.
■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■■ Install new batteries.
■■ Is the sleep timer set?
Power is suddenly
■■ Check the power control settings. Has the Power supply been interrupted.
turned off
■■ If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The video function does not work.
■■ Check whether the TV is switched on.
■■ Try another channel. The problem may be with the broadcast.
No picture & No sound ■■ Is the power cord inserted correctly into the mains?
■■ Check your antenna direction and/or location.
■■ Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly ■■ This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
after switching on
■■ Adjust Colour in menu option.
No or poor colour
or poor picture
■■ Allow a sufficient distance between the TV and the VCR.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the video cables installed properly?
■■ Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting
HDMI
22
■■ Check for local interference such as an electrical appliance or power tool.
■■ Station or cable channel experiencing problems, tune to another station.
■■ Station signal is weak, reposition the antenna to receive weaker stations.
■■ Check for sources of possible interference.
■■ Check antenna (Change the position of the antenna).
■■ Check that your HDMI cable is High Speed HDMI Cable.
If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display
can result. Please use the High Speed HDMI Cable.
The audio function does not work.
Picture OK & No
sound
No output from one
of the speakers
Unusual sound from
inside the TV
No sound when connecting HDMI or USB
■■ Press the
+ or - button.
■■ Sound muted? Press MUTE button.
■■ Try another channel. The problem may be with the broadcast.
■■ Are the audio cables installed properly?
ENGLISH
■■ Check whether the TV is switched on.
■■ Adjust Balance in menu option.
■■ A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
■■ Check HDMI cable is High Speed HDMI Cable.
■■ Check USB cable over version 2.0.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
■■ Adjust resolution, horizontal frequency, or vertical frequency.
■■ Check the input source.
■■ Use Auto configure or adjust size, phase, or H/V position. (Option)
■■ Check the signal cable.
■■ Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user changes the picture settings, ■■ It means that the TV is currently set to Store Demo mode.
the TV automatically
To switch to Home use mode you should do the followings:
converts back to the
From the TV Menu, choose OPTION -> Choose Mode Setting -> Choose
Home use. Now, you have completed switching to the Home use mode.
initial settings after a
certain period of time.
tO view the user's guide on the cd-rom
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.
If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD"
double-click your language.
To view the User 's guide
The User's guide files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically.(Windows users only)
If the web page does not appear automatically, open the User's guide file directly.
Open "My computer" Open the folder "LG" Double click the "index.htm" file.
23
An extended Owner ’s Manual that contains
information on the advanced features of these LG
TV sets is located on the CD- ROM provided in an
electronic version.
To read these files, you will need to use a Personal
Computer (PC) equipped with a CD- ROM drive.
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
Model :
Serial No. :
Download PDF