LG | 22LK230 | LG 22LK230 Owner’s Manual

OWNER’S MANUAL
LCD TV
Please read this manual carefully before operating the
set and retain it for future reference.
P/NO : MFL66100461 (1107-REV01)
Printed in Korea
www.lg.com
2
LICENSES
ENGLISH
ENG
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
NOTE
Image shown may differ from you TV.
yy
Your TV's OSD(On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
TABLE OF CONTENTS
2
LICENSES
23 MAKING CONNECTIONS
23
Connection Overview
Connecting to a HD receiver, DVD, or
4
ASSEMBLING AND PREPARING
24
4
Unpacking
24
- HDMI connection
4
Parts and buttons
24
- Composite Connection
6
Lifting and moving the TV
25
Connecting to an Audio System
6
Setting up the TV
25
- External Stereo Connection
6
- Attaching the stand
7
- Tidying cables
26 TELETEXT
8
- Mounting on a table
26
Switch On/Off
9
- Mounting on a wall
26
Simple Text
26
- Page selection
26
- Programming a colour button in LIST
27
Top Text
27
- Block / Group / Page Selection
10
REMOTE CONTROL
11
WATCHING TV
11
Connecting to an antenna
VCR player
mode
27
- Direct Page Selection
27
Fastext
11
- Connecting an antenna
11
Turning the TV on for the first time
11
Watching TV
12
Managing programmes
12
- Automatically setting up programme
28 MAINTENANCE
12
- Manually setting up programme
14
- Editing your programme list
28
Cleaning Your TV
14
- Using favourite programmes
28
- Screen and frame
15
Using additional options
28
- Cabinet and stand
15
- Adjusting aspect ratio
16
- Using the input list
17
CUSTOMIZING TV SETTINGS
17
The SETUP Menu
17
Customizing Settings
17
- SETUP Settings
18
- PICTURE Settings
20
- AUDIO Settings
22
- TIME Settings
22
- OPTION Settings
27
- Page selection
27
Special Teletext Function
28
- Power cord
28
Preventing “Image burn” or “Burn-in” on
your TV screen
29 TROUBLESHOOTING
31 SPECIFICATIONS
ENGLISH
ENG
TABLE OF CONTENTS
3
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.
Remote control and batteries
(AAA)
Owner’s manual
Power Cord
x2
M4 x 20
Screw for assembly
Cable holder
CAUTION
yy
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
Parts and buttons
Image shown may differ from your TV.
yy
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
yy
turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
yy
is reduced, and this will reduce the overall running cost.
CAUTION
yy
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from
fragments of glass, or the TV may fall.
yy
Do not drag the TV. The floor or the product may be damaged.
ASSEMBLING AND PREPARING
5
ENGLISH
ENG
Speakers
Remote control sensors
Power indicator
MODE
PR
SERVICE ONLY
IN
AV IN
Rear Connection panel
(See p.23)
AUDIO OUT
ANTENNA IN
L
VIDEO L/MONO AUDIO R
R
Button
/I
MODE
Description
Turns the power on or off.
Selects the Volume, Input, Picture Mode, Sound Mode, Aspect Ratio, Auto Tuning.
Scrolls through the saved programmes.
Sets the MODE selected Volume, Input, Picture Mode, Sound Mode, Aspect Ratio, Auto
Tuning.
Volume
Input
Picture Mode
Sound Mode
Aspect Ratio
Auto Tuning
PR
+ OK
-v
Menu
1
Press the - button to select the desired menu.
2
Press the + button to access the selected menu.
3
Press the MODE button to return to the nomal TV viewing.
* When you using the function, press the MODE button to return
to the previous menu.
Button
Volume
+ : Volume Up / - : Volume Down
Input
+ : Selects the mode / - : Scrolls the menu
Picture
Sound
+ : Scrolls the menu to the right / - : Scrolls the menu to the left
Aspect Ratio
Auto Tuning
+ : Searches the channel / - : Stops searching the channel
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
CAUTION
Avoid touching the screen at all times, as this
yy
may result in damage on the screen.
It is recommended to move the TV in the box
yy
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
yy
power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
Hold the top and bottom of the TV frame firmly.
yy
Make sure not to hold the transparent part,
speaker, or speaker grill area.
Setting up the TV
Put your TV on a pedestal stand and mount the TV
on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
CAUTION
yy
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
1 Lay the TV with the screen side down on a flat
surface.
CAUTION
Lay a foam mat or soft protective cloth on the
yy
surface to protect the screen from damage.
Make sure no objects press against the
screen.
2 Assemble the parts of the Stand Body with the
When transporting a large TV, there should be
yy
at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
Stand Base of the TV.
Stand Body
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
Stand Base
ASSEMBLING AND PREPARING
Tidying cables
Gather and bind the cables with the Cable
Holder on the TV back cover.
4 Secure the TV and the stand with the 2 screws.
Screw for assembly
Number of screws
M4 x 20
2
Cable Holder
CAUTION
yy
Do not move the TV by holding the Cable
Holder, as the Cable holders may break,
and injuries and damage to the TV may occur.
ENGLISH
ENG
3 Assemble the TV as shown.
7
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
Securing the TV to a wall
1 Lift and tilt the TV into its upright position on a
(This feature is not available for all models.)
table.
-Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
CAUTION
yy
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
Using the Kensington security system
(This feature is not available for all models.)
The Kensington security system connector is located at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit http://
www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
CAUTION
yy
Make sure that children do not climb on or
hang on the TV.
NOTE
yy
Use a platform or cabinet that is strong and
large enough to support the TV securely.
ASSEMBLING AND PREPARING
CAUTION
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
yy
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
yy
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
yy
Do not over tighten the screws as this may
cause damage to the TV and void your warranty.
yy
Use the screws and wall mount bracket that
meet the VESA standard. Any damages or
injuries by misuse or using an improper accessory are not covered by the warranty.
10 cm
NOTE
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard dimensions for the wall mount kits are described in the
following table.
Separate purchase(Wall Mounting Bracket)
Model
22LK2**
VESA (A x B)
Standard screw
Number of screws
Wall mount
bracket
100 x 100
M4
4
LSW100B, LSW100BG
A
B
yy
Use the screws that are listed on the VESA
standard screw specifications.
yy
The wall mount kit includes an installation
manual and necessary parts.
yy
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy
For more information, refer to the manual
supplied with the wall mount bracket.
ENGLISH
ENG
Mounting on a wall
9
10
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
(POWER)
Turns the TV on or off.
TV
Returns to the TV viewing from any mode.
INPUT (See p.16)
Changes the input source.
MUTE
Mutes all sounds.
PSM
Recalls your preferred picture setting.
SSM
Recalls your preferred sound setting.
I/II (See p.21)
Selects the sound output.
0 to 9 number buttons
Selects a programme.
Selects numbered items in a menu.
LIST (See p.14)
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
Adjusts the volume.
Selects a programme.
OK
Selects menus or options and confirms your input.
MENU (See p.17)
Selects a menu.
SLEEP
Sets the sleep timer.
RATIO (See p.15)
Selects your desired picture format.
Control buttons
These buttons are used for teletext (on TELETEXT
models only) or Programme edit.
TELETEXT buttons (See p.26)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
WATCHING TV
Connecting to an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connecting an antenna
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press
the TV on.
(POWER) to turn
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Factory Reset by
yy
accessing Option menu.
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language
Selects a language to display.

Auto Tuning
Scans and saves available
programmes automatically.
4 When the basic settings are complete,
press OK.
ANTENNA IN
NOTE
yy
If you do not complete the Initial setting, it
will appear whenever the TV turns on.
yy
Disconnect the power cord from the power
outlet when you do not use the TV for a long
period of time.
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
yy
If the image quality is poor, install a signal
yy
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
yy
connected, aim the antenna to the correct
direction.
An antenna cable and converter are not
yy
supplied.
5 To turn the TV off, press
(POWER).
Watching TV
1 In Standby mode, press
the TV on.
(POWER) to turn
2 Press INPUT and select TV.
3 To turn the TV off, press
(POWER).
The TV switches to Standby mode.
ENGLISH
ENG
WATCHING TV
11
12
WATCHING TV
ENGLISH
ENG
Managing programmes
Manually setting up programme
Automatically setting up programme
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
Use this to automatically find and store all available programmes.
When you start auto programming, all previously
stored service information will be deleted.
1 Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Auto Tuning.
3 Select To Set and press the Navigation buttons
to scroll to System. Select your desired
system.
4 Press the Navigation buttons to scroll to
Storage From and select the initial programme
number.
5 Press the Navigation buttons to scroll to
Search and select To Start to begin auto
tuning.
The TV scans and saves available programmes automatically.
6 When you return to the previous menu, press
MENU.
1 Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number but-
tons to select the desired programme number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System menu.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
Press the Navigation buttons and then select
the desired programme number with the Navigation buttons or Number buttons.
10 Press the Navigation buttons to scroll to
Search.
11Press the Navigation buttons to scroll and start
searching.
12Press the OK to store it.
13When you return to the previous menu, press
MENU.
NOTE
yy
To store another programme, repeat steps 3
to 11.
WATCHING TV
Fine Tuning
You can assign a station name with five characters
to each programme number.
Normally fine tuning is only necessary if reception
is poor.
1 Press MENU and the Navigation buttons to
1 Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to select
the position and make your choice of the second character, and so on. You can use an the
alphabet A to Z, the number 0 to 9, +/ -, and
blank and press OK.
5 Press the OK to store it.
6 When you return to the previous menu, press
MENU.
scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for
the best picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu, press
MENU.
ENGLISH
ENG
Assigning a station name
13
14
WATCHING TV
ENGLISH
ENG
Editing your programme list
Selecting a programme on the programme list
When a programme number is skipped, it means
that you will be unable to select it using P mvbutton during TV viewing.
If you wish to select the skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the Programme
edit menu.
This function enables you to skip the stored programmes.
1 Press LIST to access the programme list.
1 Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to Programme Edit.
2 Press the Navigation buttons to select to desired programme and press OK.
3 When you return to the previous menu, press
LIST.
NOTE
yy
You may find some blue programmes. They
have been set up to be skipped by auto programming or in the programme edit mode.
yy
Some programmes with the channel number
shown in the programme list indicate there is
no station name assigned.
3 Select To Set and edit programmes using the
following buttons.
Button
Description
Deletes a programme.
Press the Red button twice. The selected
Red button
programme is deleted, all the following
programmes are shifted up one position.
Moves a programme.
Green button Press the Green button again to release
this function.
Selects a programme number to be
Blue button skipped. Press the Blue button again to
release the skipped programme.
4 When you return to the previous menu, press
MENU.
Using favourite programmes
Add the programmes that you watch frequently to
the favourite list.
1 Press MENU and the Navigation buttons to
scroll to SETUP.
2 Press the Navigation buttons to scroll to Favourite Programme.
3 Press the Navigation buttons and the Number
buttons to select to the desired programme.
4 To store another programme, repeat steps 3.
You can store up to 8 programmes.
5 When you return to the previous menu, press
MENU.
NOTE
yy
Press Yellow button to access directly to the
stored Favourite Programme. Press the Yellow button again to shift the stored Favourite
Programme.
WATCHING TV
Adjusting aspect ratio
- 14:9 : You can view a picture format of 14:9
or a general TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way as
in 4:3, but is moved to the up and down.
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
yy
You can also change the image size by
accessing Aspect Ratio in the PICTURE
menus.
yy
You can adjust the enlarge proportion using
the Navigation buttons.
- Zoom 1 : The following selection will allow you
- 16:9: Resizes images to fit the screen width.
(This function works in RF/AV/HDMI Mode.)
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
(This function works in RF/AV Mode.)
- Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
- Zoom 2 : Choose Zoom 2 when you wish
the picture to be altered, both horizontally
extended and vertically cropped. The picture
adopting a compromise between alteration
and screen coverage.
(This function works in RF/AV Mode.)
- 4:3: Resizes images to the previous standard
4:3. (This function works in RF/AV/HDMI
Mode.)
NOTE
yy
If you enlarge or reduce an image, the image
may be distorted.
ENGLISH
ENG
Using additional options
15
16
WATCHING TV
ENGLISH
ENG
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
-The connected device displays on each input
source.
2 Press the Navigation buttons or input button
to scroll to one of the input sources and press
OK.
Image shown may differ from your TV.
yy
Input
TV
TV
AV
HDMI
mv OK
Input source
Description
TV
Watch TV over the air and digital cable
broadcast.
AV
Watch video from a VCR or other
external devices.
HDMI
Watch video from a HTS or other high
definition devices.
CUSTOMIZING SETTINGS
17
ENGLISH
ENG
CUSTOMIZING TV SETTINGS
The SETUP Menu
1 Press MENU and press the Navigation buttons to scroll to one of the following menus and press OK.
2 Press the Navigation buttons to scroll to the setting or option you want and press OK.
3 When you return to the previous menu, press MENU.
Menu
Description
SETUP
Sets up and edit programmes.
PICTURE
Adjusts the image size, quality, or effect.
AUDIO
Adjusts the sound quality, effect, or volume level.
TIME
Sets the time, date, or timer feature.
OPTION
Customizes the general settings.
??
Customizing
Settings
?
?
?
SETUP Settings
Image shown may differ from your TV.
yy
1 Press MENU and the Navigation buttons to scroll to Setup.
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3 When you return to the previous menu, press MENU.
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
mv◄s OK MENU
The available programme settings are described in the following:
Setting
Description
Auto Tuning
Tunes and stores all available programmes through antennas inputs (See p.12).
Manual Tuning
Tunes and stores the programmes you want manually (See p.12).
Programme Edit
Edits programmes (See p.14).
Favourite Programme
Selects your favourite programmes directly(See p.14).
18
CUSTOMIZING SETTINGS
ENGLISH
ENG
PICTURE Settings
Image shown may differ from your TV.
yy
1 Press MENU and the Navigation buttons to scroll to Picture.
Picture
2 Press the Navigation buttons to scroll to the setting or option
Aspect Ratio
Picture Mode
• Backlight
100
• Contrast
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
• Advanced
mv◄s OK MENU
• Picture Reset
you want and press OK.
3 When you return to the previous menu, press MENU.
The available picture settings are described in the following.
Setting
Description
Aspect Ratio
Changes the image size to view images at its optimal size (See p.15).
Picture Mode
Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode.
Mode
Vivid(user)
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, colour, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video images for a cinematic look to enjoy movies as if you are
in a movie theatre.
CUSTOMIZING SETTINGS
19
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Advanced
Customizes the advanced options.
Picture Reset
Restores the options of each mode to the factory default.
Advanced image options (Depending on model)
Setting
Description
Dynamic Contrast
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker.
Dynamic Colour
Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue and green white look more vivid.
Noise Reduction
Reduces screen noise without compromising video quality.
Black Level
ets black level of the screen to proper level. This function is available in the following
S
modes: RF, AV or HDMI.
»»Low: The reflection of the screen gets darker.
»»High: The reflection of the screen gets brighter.
Film Mode
Makes video clips recorded in film look more natural.
This feature operates only in RF or AV mode 480i/576i.
Colour Temperature
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours
such as red, or set to cool to see less intense colours with more blue.
You can control red, green, blue to adjust colour details.
ENGLISH
ENG
Basic image options
20
CUSTOMIZING SETTINGS
ENGLISH
ENG
AUDIO Settings
Image shown may differ from your TV.
yy
1 Press MENU and the Navigation buttons to scroll to Audio.
2 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3 When you return to the previous menu, press MENU.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
mv◄s OK MENU
The available audio settings are described in the following.
Setting
Sound Mode
Description
Selects one of the preset sound modes or customizes options in each mode.
Mode
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Option
Treble
Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will
increase the output to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Auto Volume
Activates the Auto Volume feature to keep the volume level consistent whenever you change
channels. The volume level may not be consistent due to different signal conditions of broadcasting
stations.
Balance
Adjust balance between the left and right speakers according to your room environment.
CUSTOMIZING SETTINGS
21
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1 Press I/II button to select the Multi Audio menu.
Broadcast
On Screen Display
Mono
Stereo
Dual
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
NICAM
yy
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
yy
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
DUAL I DUAL I I DUAL I+I I Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1 When NICAM mono is received, you can select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or
FM MONO.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
ENGLISH
ENG
This feature may not be applied based on country broadcasting circumstance.
22
CUSTOMIZING SETTINGS
ENGLISH
ENG
TIME Settings
Image shown may differ from your TV.
yy
Time
1 Press MENU and the Navigation buttons to scroll to Time.
Clock
Off Time
On Time
Sleep Timer
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3 When you return to the previous menu, press MENU.
mv◄s OK MENU
The available time settings are described in the following
Setting
Description
Clock
Sets the time.
Off Time/On Time
Sets the time to turn on or off the TV automatically. To use this function, you should set the
current time and date in advance.
NOTE
yyIf you do not press any button within 2 hours after the TV turns on by the On Time
feature, the TV enters the Standby mode automatically.
yyIf you set both Off time and On time features to the same time, the Off time feature
overrides the On time feature.
Sleep Timer
Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again,
the Sleep timer feature will be set to off.
OPTION Settings
Image shown may differ from your TV.
yy
1 Press MENU and the Navigation buttons to scroll to Option.
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Option
Language
Key Lock
Factory Reset
3 When you return to the previous menu, press MENU.
mv◄s OK MENU
The available general settings are described in the following:
Setting
Description
Language
Selects a language for the display or audio.
Key Lock
Activates or deactivates the lock system.
Factory Reset
Resets the TV to factory default and erases all stored programmes.
Customizes the TV settings to suit your preference. The factory reset screen will appear when you
turn on the TV for the first time.
MAKING CONNECTIONS
23
Connect various external devices to the TV and switch input modes to select an external device. For more
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, and other external
devices.
NOTE
If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV
yy
signal input cable to the TV through a DVD recorder or VCR. For more information on
recording, refer to the manual provided with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
Connection Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
Speaker
HDMI – See p.24
Composite – See p.24
Audio – See p.25
NOTE
Refer to the external equipment's manual for operating instructions.
yy
VCR
ENGLISH
ENG
MAKING CONNECTIONS
24
MAKING CONNECTIONS
ENGLISH
ENG
Composite Connection
Image shown may differ from your TV.
yy
Connecting to a HD receiver,
DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the
TV and select an appropriate input mode.
Transmits the analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with the composite
cable as shown in the following illustration.
SERVICE ONLY
HDMI connection
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown
in the following illustration.
AV IN
AV IN
A
AUDIO OUT
ANTENNA IN
VIDEO L/MONO AUDIO R
SERVICE ONLY
IN
L
R
IN
AUDIO OUT
ANTENNA IN
R
A
VIDEO L/MONO AUDIO
L
R
VIDEO
L/MONO R AUDIO
HDMI
NOTE
If you have a mono VCR, connect the audio
yy
cable from the VCR to the AUDIO L/MONO
jack of the TV.
MAKING CONNECTIONS
ENGLISH
ENG
Connecting to an Audio
System
Use an external audio system instead of the
built-in speaker.
External Stereo Connection
Use to connect to an external amplifier, or surround
sound system.
SERVICE ONLY
AV IN
A
R
A
VIDEO L/MONO AUDIO
IN
AUDIO OUT
L
R
L
R
AUDIO IN
External Stereo
25
ANTENNA IN
26
TELETEXT
ENGLISH
ENG
TELETEXT
Simple Text
yy
This feature is not available in all countries.
Teletext is a free service broadcast by most TV
stations which gives up-to-the-minute information
on news, weather, television programmes, share
prices and many other topics.
1 Enter the desired page number as a three digit
The teletext decoder of this TV can support the
SIMPLE, TOP and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of pages
which are selected by directly entering the corresponding page number. TOP and FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
2 The P mv button can be used to select the
Page selection
number with the Number buttons. If during
selection you press a wrong number, you must
complete the three digit number and then reenter the correct page number.
preceding or following page.
Programming a colour button in
LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
Switch On/Off
Press the TEXT button to switch to teletext. The
initial page or last page viewed appears on the
screen.
Two page numbers, TV station name, date and
time are displayed on the screen headline. The
first page number indicates your selection, while
the second shows the current page displayed.
Press the TEXT button to switch off teletext. The
previous mode reappears.
mode, press the ꔻ button to switch to LIST mode.
Four teletext page numbers of your choice can
be colour coded and easily selected by pressing
the corresponding coloured button on the remote
control handset.
1 Press a coloured button.
2 Using the Number buttons, select the page you
wish to programme.
3 Press the OK button. The selected page is
stored as the selected page number, blinking
once to confirm this. From now on, you can
select this page with the same coloured button.
4 The three other coloured buttons are programmed in this way.
TELETEXT
The user guide displays four fields-red, green,
yellow and blue at the bottom of the screen. The
yellow field denotes the next group and the blue
field indicates the next block.
Block / Group / Page Selection
1 With the Blue button you can progress from
block to block.
2 Use the Yellow button to proceed to the next
group with automatic overflow to the next
block.
3 With the Green button you can proceed to the
next existing page with automatic overflow to
the next group. Alternatively, the P m button
can be used.
4���������������������������������������������
The red button returns to the previous selection. Alternatively the P v button can be used.
Direct Page Selection
s with SIMPLE teletext mode, you can select a
A
page by entering it as a three digit number using
the Number buttons in TOP mode.
Fastext
Special Teletext Function
ꔾ Time
When viewing a TV programme, select this
menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to select
a sub page number. The sub page number is
displayed at the bottom of the screen. To hold
or change the sub page, press the Red button,
Green button, mv or Number buttons. Press
again to exit this function.
SIZE
Selects double height text.
Press this button to enlarge the top half of the
page.
Press this button again to enlarge the bottom
half of the page.
Press this button again to return to the normal
display.
ꔼ Update
Displays the TV picture on the screen while
waiting for a new teletext page. The display
will appear at the top left hand corner of the
screen. When the updated page is available
then display will change to the page number.
Select this menu again to view the updated
teletext page.
ꔽ Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
ꔻ Index
Select the each index page.
Page selection
ꕀ Hold
1 Press the ꔻ button to select the index page.
2 You can select the pages which are colour
coded along the bottom line with corresponding
coloured buttons.
3 AS with SIMPLE teletext mode, you can select
a page by entering its three digit page number
with the Number buttons in FASTEXT mode.
4 The P mv button can be used to select the
preceding or following page.
Stops the automatic page change which will
occur if a teletext page consists of 2 or more
sub pages. The number of sub pages and
the sub page displayed is, usually, shown on
the screen below the time. When this menu
is selected the stop symbol is displayed at
the top left-hand corner of the screen and the
automatic page change is inactive. To continue
press this button again.
MIX
Displays the teletext pages superimposed on
the TV picture.
To switch the TV picture off press this button
again.
ENGLISH
ENG
Top Text
27
28
MAINTENANCE
ENGLISH
ENG
MAINTENANCE
Cleaning Your TV
CAUTION
yy
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended and unused
for a long time, disconnect the power cord
from the wall outlet to prevent possible damage from lightning or power surges.
Power cord
Remove the accumulated dust or dirt on the power
cord regularly.
Preventing “Image burn”
or “Burn-in” on your TV
screen
Screen and frame
To remove dust or light dirt, wipe the surface with a
dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy
Do not push, rub, or hit the surface with
your fingernail or a sharp object, as this may
result in scratches on the screen and image
distortions.
yy
Do not use any chemicals, such as waxes,
benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage
the screen’s finish and cause discolourations.
Cabinet and stand
To remove dust or light dirt, wipe the cabinet with a
dry, clean, and soft cloth.
To remove major dirt, wipe the cabinet with a soft
cloth dampened in a clean water or water containing a small amount of mild detergent. Then wipe
immediately with a dry cloth.
CAUTION
yy
Do not spray liquid onto the surface. If water
enters the TV, it may result in fire, electric
shock, or malfunction.
yy
Do not use any chemicals as this may deteriorate the surface.
yy
If a fixed image displays on the TV screen for a
long period of time, it will be imprinted and become a permanent disfigurement on the screen.
This is “image burn” or “burn-in” and not covered
by the warranty.
yy
If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
yy
Avoid displaying a fixed image on the TV screen
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
TROUBLESHOOTING
29
ENGLISH
ENG
TROUBLESHOOTING
General
Problem
Resolution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
yyCheck if the batteries are still working and properly installed ( to ,
to ).
yyCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV
turns on.
yyThe image is muted during the product stat up process. This is normal. If the
image does not appear in a few minutes, unplug the TV for 30 seconds and
try again. If the image still does not appear, contact the authorized service
centre in your local area.
Cannot connect external devices.
yyRefer to the “Connection overview” and connect an external device.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the auto sleep feature is activated in the Time settings.
Refer to the “Sleep Timer”.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
Audio
Problem
Resolution
No sound is produced while images
are displaying.
yyPress VOL ◄ or s button.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
No output from one of the speakers
yyAdjust Balance in the menu option.
Unusual sound from inside the TV
is produced.
yyA change in ambient humidity or temperature may result in an unusual noise
when the product turns on or off. There is no problem with your product.
30
TROUBLESHOOTING
ENGLISH
ENG
Video
Problem
Resolution
An image displays in black and
white or the colour quality is poor.
y yAdjust the colour setting in the menu option.
y yKeep a sufficient distance between this product and other electronic products.
y yScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
y yCheck if there is local interference such as an electrical appliance or power
tool.
Lines or streaks appear on images
y yCheck the antenna or aim the antenna to the correct direction.
Afterimages (ghosts) appear when
the product turns off
y yPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen appears extremely dark.
y yAdjust the brightness and contrast in the menu option.
“No Signal” appears on the screen.
y yCheck if the signal cable is connected between the TV and products properly.
y yCheck the selected input source by pressing INPUT.
Black spots appear on the screen.
The display offset is wrong.
yySeveral pixels in red, green, white, or black may appear on the screen that
can attribute to the characteristics of the panel.
This is normal.
y yAdjust the position setting in the menu option.
y yCheck if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution using
the display settings on the external device.
Thin lines appear in the background y yCheck the video cable connections.
of the screen.
The reception on some channels
is poor
y yScroll to other channels. There may a problem with the broadcast.
y yThe station signal may be weak. Aim the antenna to the correct direction.
y yCheck if there is local interference such as an electrical appliance or power
tool.
SPECIFICATIONS
31
ENGLISH
ENG
SPECIFICATIONS
22LK2**
22LK230-TA
MODELS
Dimensions
(W x H x D)
Weight
With stand
640 mm x 391.4 mm x 168.1 mm
Without stand
640 mm x 334.5 mm x 56 mm
With stand
4.4 kg
Without stand
4.1 kg
Power requirement
AC 100-240 V~ 50 / 60 Hz
Television System
Programme Coverage
External Antenna Impedance
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
75Ω
Operating Temperature
Environment
condition
0 °C to 40 °C
Less than 80 %
Operating Humidity
Storage Temperature
-20 °C to 60 °C
Less than 85 %
Storage Humidity
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
For the power supply and power consumption, refer to the label attached to the product.
HDMI-DTV supported mode
Resolution
720x480
720x576
1280x720
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.47
31.5
31.25
44.96
45
37.5
59.94
60.00
50
59.94
60.00
50.00
NOTE
In some external device is connected, it may
yy
take some time to display the TV screen
when you change the resolution.
The model and serial numbers of the TV is
located on the back of the TV
Record it below should you ever need service.
MODEL
SERIAL
Download PDF

advertising