LG | 32FS2RMB | LG 32FS2RMB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0573A
(MC035E,
136V/007B
TX)
c
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
9
Setting
Picture adjustment
PSM (Picture Status Memory)
DRP (Digital Reality Picture)
XD / Picture adjustment / Eye (option)
Turbo picture selection (option)
Picture format
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
X-WAVE (Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
18
Time
21
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option)
Tilt / Degaussing (option) / Sleep timer
22
PIP
24
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
Connection of PC
RGB PC mode
25
28
(option)
/ PC in socket
(option)
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart sockets (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets
DTV in sockets / Monitor out sockets
Audio out sockets (AUDIO OUT) (option)
Headphone socket (option)
Troubleshooting
2
check list
29
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
You
can
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
install the set to the rack.
Manufactured under license from Dolby Laboratories. "Dolby"
and
the double-D symbol are trademarks of
Dolby
Laboratories.
3
Location and function of controls
All the functions
Some functions
panel of the set.
can
can
be controlled with the remote control handset.
also be adjusted with the buttons on the front
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
1
EYE/
TV/AV
13
2
1.
TURBO
SOUND
14 2.
PIP
TEXT
15
4
PR-
PR+
SWAP
INPUT
PR
OK
6.
D / E
9
PSM
0
SSM
9
10
I/II
SLEEP
LIST
MAIN STILL
INDEX/
FAVOURITE
REC
STOP
18
19
20
adjusts
REW
SIZE
PLAY
22
TIME
MIX
REVEAL
?
MODE
M
or
7.
NUMBER BUTTONS
switches the set on from
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
ARC
POSITION
settings.
accepts your selection
FF
STILL
menu
OK
Q.VIEW
21
12
a menu.
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
17
11
off.
MENU
selects
123
8
standby.
5.
PR
8
off to
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
VOL
7
on or
or
4.
6
456
standby
TURBO SOUND BUTTON
selects Turbo sound.
16
7
from
EYE/ * (option)
switches the eye function
3.
MUTE
5
VOL
on
PICTURE
3
MENU
POWER
switches the set
handset, please install the bat-
sleep
displays
standby
the current mode.
or
directly
select
a
number.
Memory)
picture setting.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. MAIN STILL
freezes motion of the
picture.
12. VCR BUTTONS
control a LG video cassette recorder.
( With TELETEXT)
4
Location and function of controls
13. TV/AV
selects TV or AV mode.
switches the set on from
standby.
14. TURBO PICTURE BUTTON
selects Turbo
picture.
POWER
15. TELETEXT BUTTONS
1
(option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
EYE/
TV/AV
13
2
TURBO
SOUND
PICTURE
14
3
16. MUTE
switches the sound
on or
PIP
off.
4
PR-
17. SSM
(Sound Status Memory)
recalls your preferred sound setting.
PR+
SWAP
18. LIST
MENU
displays
on or
off.
16
VOL
OK
VOL
6
20. FAVOURITE
a
MUTE
(option)
switches LED DISPLAY
selects
PR
5
the programme table.
19. INDEX/ *
INPUT
favourite programme.
21. Q.VIEW
returns to the
previously
viewed programme.
PR
22. ARC
(Aspect Ratio Control)
changes the picture format.
*
:
No function
Battery
models)
2
3
5
6
7
COLOURED BUTTONS
TELETEXT
1
4
or
:
These buttons
are
used for teletext
7
8
9
PSM
0
SSM
I/II
SLEEP
LIST
(only
programme edit.
17
8
9
10
installation
MAIN STILL
The remote control handset is
To load the
batteries,
powered by
two AAA
type batteries.
turn the remote control handset
over
INDEX/
FAVOURITE
11
and
open the battery compartment. Install two batteries as indicated by 12
the polarity symbols ( + and
) marked inside the compartment.
REC
STOP
18
19
20
Q.VIEW
21
REW
PLAY
FF
-
SIZE
STILL
ARC
22
POSITION
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
( Without TELETEXT)
5
Location and function of controls
Front
panel
29/32FS1 series
S-VIDEOL/MN
1
ON/OFF
6
AUDIO
R
AV3
52
3
4
8
S-VIDEOL/MN
29/32FS2 series
6
3
AUDIO
R
AV3
4
PCINUT
9
1
2 5
1.
MAIN POWER
6.
(ON/OFF)
switches the set
on or
Side
7
off.
AUDIO/VIDEO IN SOCKETS
POWER/STANDBY INDICATOR
illuminates
brightly
(AV3)
Connect the audio/video out sockets of external
2.
panel
when the set is in
mode.
dims when the set is switched
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
(S-AV)
Connect the video out socket of
standby
on.
VIDEO VCR to the audio sockets
3.
7.
a menu.
OK
accepts your selection
or
displays
EYE (option)
adjusts picture according
to the
surrounding
the current
8.
F / G
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
HEADPHONE SOCKET
Connect the
9.
REMOTE CONTROL SENSOR
headphone plug
PC INPUT SOCKET
to this socket.
(option)
Connect the monitor output socket of the
PERSONAL COMPUTER to this socket.
Note
:
640x480
6
S-
in AV3.
conditions.
mode.
5.
of the
as
MENU
selects
4.
S-VIDEO
an
VCR to the S-VIDEO socket.
Connect the audio out sockets
Set the
(60 Hz)
PC monitor.
resolution
of PC to
video mode to
use
VGA
this set
as
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
,
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
POWER
selection
TV/AV
TURBO
You can select
buttons.
Volume
a
programme number with the D / E
or
NUMBER
SOUND
adjustment
Press the F / G button to
adjust
the volume.
MENU
PR
MUTE
Quick view
Press the Q.VIEW button to view the last programme you
were
watching.
VOL
OK
VOL
Mute function
Press the MUTE button. The sound is switched off and the
display
PR
W
appears.
You can cancel it
by pressing
the
MUTE,
F /
G, SSM, I/II, TURBO
SOUND button.
Auto Demonstration
menus programmed in the set, press the OK butcontrol for about 10 seconds. To stop auto demonstration, press any button of the panel control or POWER button of
the remote control.
1
2
3
4
5
6
7
8
9
0
SSM
To review all the
ton of the
panel
I/II
Q.VIEW
On
screen
language
selection
The menu can be displayed
First select your language.
1.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
3.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
language.
viewing.
7
On
screen menus
The
an
dialogue between you and your set takes place on screen with
operator menu. The buttons required for the operating steps are
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
F / G or D / E
of
an
item in the sub
or
pull-down
menu
with
.
You can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
On some models, the Language, X-WAVE will not display.
Station
MENU
VOL
PR
OK
VOL
Auto programme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
Storage
System
{
2
Channel
{
Fine
{
Search
{
Name
{
Booster
{
()O}{OOKOMENU
()O}{OOKOMENU
Station
menu
Manual programme
Picture
PR
PSM
{
DRP
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{O OKOMENU
{
()O}{OOKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
AVL
{
O1OOCO03OOO6OOSO17
DBS
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
{
O4OOSO67OOO9OOCO11
§Volume
X-WAVE
{
DeleteOOOCopy
MoveOOOOOSkip
()}{O OKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{O OKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
()O}{O OKOMENU
Special
TV programme
8
BG
AutoOprogramme
ManualOprogramme
menu
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
2.
tuning
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
AutoOprogramme
ManualOprogramme
be stored.
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
Station
Press the G button to
display
the Auto programme
menu.
Auto programme
System
StorageOfrom
{
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
BG
MENU
PR
()O}{OOKOMENU
4.
Press the G button. Select a TV system with the D / E button
the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
on
5.
6.
7.
8.
9.
Option:
In
some
models, you
can
only
select Start.
VOL
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
()O}{O OKOMENU
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
3.
Press the G
button to
display
the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
4.
MENU
VOL
PR
OK
5.
VOL
6.
7.
8.
PR
1
2
3
4
5
6
7
8
9
9.
10.
0
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the F button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another
17.
10
Repeatedly
viewing.
station, repeat steps 4 to 15.
press the MENU button to return to normal TV
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
Press the D / E button to select Name.
Press the G button on the Name pull-down
Press the D button. You
and the alphabet A to Z.
can use a
blank,
Station
1 to 3.
menu.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
+, -, the numeric 0 to 9
5.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
6.
Press the OK button.
7.
Repeatedly
viewing.
()O}{OOKOMENU
press the MENU button to return to normal TV
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
MENU
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
4.
Press the D / E button to select On
down menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
1
Fine
or
Off
the Booster
pull-
VOL
OK
VOL
press the MENU button to return to normal TV
PR
fine
tuning
is
only
necessary if
reception
2.
the 'Manual programme tuning'
Press the D / E button to select Fine.
3.
Press the G button.
4.
on
tuning
Normally
1
PR
Repeat
Repeat
Press the F / G
sound
on
steps
is poor.
1 to 3.
button to fine tune for the best
the Fine
pull-down
picture
and
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
O}{O OKOMENU
5.
Press the OK button.
6.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
11
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()O}{O OKOMENU
2.
Press the MENU button and then D / E button to select the
Station menu.
Press
the
G
button
and
then
D
E
/
button
to
select
Programme edit.
3.
Press the G button to
display
Programme
the
Programme edit
menu.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{O OKOMENU
Deleting
MENU
1.
PR
2.
VOL
a
Select
programme to be deleted with the D / E orF/Gbutton.
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
VOL
Copying
1.
2.
a
Select
1
2
3
5
6
7
8
9
1.
2.
3.
0
4.
following
pro-
programme
programme to be copied with the D / E orF/Gbutton.
Press the GREEN button.
Moving
4
all the
a
All the
PR
programme
a
following
programmes
are
shifted down
one
position.
a
programme
Select a programme to be moved with the D / E orF/Gbutton.
Press the YELLOW button.
Move the programme to the desired programme number with
the D / E orF/Gbutton.
Press the YELLOW button again to release this function.
Programme
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Select
a
programme number
programme number to be
Skipping
a
1.
skipped with
the D / E orF/G
button.
2.
3.
Press the BLUE button. The
skipped programme turns to blue.
again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER butPress the BLUE button
tons
or
Repeatedly
12
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
Setting up
TV stations
Station
Favourite programme
This function lets you select your favorite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
programme.
3.
Press the G button to
display
the Favourite programme
menu.
()O}{O OKOMENU
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
56n Ca 05
{
{
}{O0_9O()OOKOMENU
4.
5.
6.
7.
8.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
MENU
PR
viewing.
press the FAVOURITE button to select stored favourite
programmes.
Repeatedly
Calling
VOL
OK
VOL
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
PR
1
2
3
4
5
6
7
8
9
0
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
LIST
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
FAVOURITE
()}{O OKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E orF/Gbutton.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV viewing.
There
13
Picture
Picture
PSM
{
DRP
XD
{
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
adjustment
PSM (Picture Status
Memory)
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
3.
Press the G button and then D / E button to select
1.
()O}{O OKOMENU
a
picture
Picture
PSM
{
Dynamic
DRP
XD
Contrast
{
{
{
Standard
Brightness
{
Colour
{
Sharpness
{
Mild
Game
User
()O}OOKOMENU
the PSM pull-down menu.
setting
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
on
4.
5.
viewing.
MENU
VOL
You
can also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
PR
OK
VOL
for
good picture reproduction
DRP
PR
at the
factory
and cannot be
changed.
(Digital Reality Picture)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button and then D / E button to select DRP.
Press the G button and then D / E button to select Pro
on the DRP pull-down menu.
3.
or
100
Picture
PSM
PSM
{
DRP
XD
{
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
0Pro
0100
()O}OOKOMENU
4.
Press the OK
or
F button.
Repeatedly press the MENU
viewing.
Note : DRP is always set to Pro in
5.
dow mode.
14
button to return to normal TV
case
of NTSC
input,
double win-
Picture
adjustment
Picture
XD
You
enjoy the vivid and hi-definition picture
Digital Reality processor technology.
1.
2.
3.
can
with LG's excellent
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select XD.
Press the G button and then D / E button to select On
the XD pull-down menu.
Press the OK or F button.
or
PSM
{
DRP
XD
{
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
Off
on
4.
5.
Repeatedly
viewing.
Picture
You
can
ness
press the MENU button to return to normal TV
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
MENU
1.
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour
or
Sharpness.
VOL
PR
OK
VOL
Picture
PSM
{
DRP
XD
Contrast
{
{
{
Brightness
{
Colour
{
Sharpness
{
100
PR
()O}OOKOMENU
3.
Press the G button and then F / G button to make
adjustments
on
the each sub
appropriate
menu.
Contrast
80
}{O()OOKOMENU
4.
Press the OK button to store it for the
5.
Repeatedly
viewing.
picture
user.
press the MENU button to return to normal TV
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
perform
can
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/ * button to switch the eye function
on or
off.
EYE/
TURBO
PICTURE
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
condition
Note
eye
display
display
changes.
but the
:
in
If you press the PSM
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
Turbo
picture
selection
When this function is on, the
tinct than normal
PSM
in green does not appear continuappears each time the picture
yellow
Repeatedly
(option)
picture
will be
more
brilliant and dis-
picture.
press the TURBO PICTURE button to switch
(Turbo Picture off)
16
off.
(Turbo Picture on)
: If you press the PSM button with the Turbo picture
the Turbo picture function is automatically switched off.
Note
on or
function,
Picture
adjustment
Picture format
You
can
watch TV in various
picture formats; 4:3,
16:9
(Wide)
or
Zoom.
In
models, you can watch TV in various picture formats; 4:3,
(Wide), 14:9, Zoom or Auto.
Repeatedly press the ARC button to select your desired picture format.
some
16:9
4:3
This
format is 4 to 3 of
picture
general
TV.
16:9
You
can
enjoy the cinema (the picture
through the 16:9 mode.
format of
16:9)
or
general
TV
programme
14:9
You
(option)
can
through
screen
move
the
enjoy
picture
format of 14:9
the 14:9 mode. The
4:3 is
the
magnified
screen
up
or
screen
or
general
TV programme
14:9 is viewed
to the upper / lower and
just like that the
left / right. You can
PR
down with D / E button.
Zoom
You
can
The
screen
so
enjoy the
that the
cinema in
4:3 is
screen
may be lost. In
a
magnified
16:9 is full.
some
through the Zoom mode.
upper/lower and left/right sides
The bottom and top of the picture
vast
screen
to the
models, you
can move
the
screen
up
or
down
PR
with D / E button.
Auto (option)
When your TV receives the wide
cally changed
Note
to the
picture
screen
signal,
it will be automati-
format to be sent.
:
a.
In the PC and 1/2 PIP
b.
In
some
modes, ARC function isn't available.
models, ARC function isn't available in Component
modes.
ARC
17
Sound
SSM
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
X-WAVE
{
()O}{OOKOMENU
You
adjustment
(Sound Status Memory)
can
select your
preferred sound setting; Dolby Virtual, Flat,
Speech and you can also adjust the sound freequalizer.
Music, Movie
quency of
1.
Press the MENU button and then D / E button to select the
Sound
2.
3.
or
menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select
ting
on
the SSM
pull-down
sound set-
a
menu.
Sound
SSM
{
DolbyOVirtual
AVL
{
Flat
DBS
{
Balance
{
Music
Movie
§Volume
{
Speech
X-WAVE
{
User
{
()O}OOKOMENU
MENU
PR
Dolby Virtual
Dolby Virtual lets you
VOL
OK
experience panoramic
effects of sound.
VOL
Sound
Frequency Adjustment
Press the G button in User to
a.
display
the User sub
menu.
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
b. Select
Make
c.
SSM
a
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly
press the MENU button to return to normal TV
viewing.
You
can also recall a desired sound (Dolby Virtual, Flat, Music,
Movie, Speech or User) with SSM button on the remote control.
The sound Dolby Virtual, Flat, Music, Movie and Speech are
programmed
be changed.
Note
ment
:
for
good
sound
reproduction
If you press the SSM button after making
on
appears
the
even
factory
and cannot
appropriate adjust-
User sub menu, the display User automatically
though you have already set a factory preset setting;
Dolby Virtual, Flat, Music, Movie
18
at the
or
Speech.
Sound
Sound
You
adjustment
Sound
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
1.
2.
3.
can
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL, DBS, Balance or §Volume.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
X-WAVE
{
()O}{O OKOMENU
Sound
SSM
{
AVL
{
DBS
Balance
{
TURBO
SOUND
{
§Volume
{
X-WAVE
{
OOO0
}{OOKOMENU
4.
Repeatedly
viewing.
Note
:
In
Dolby
X-WAVE
You
1.
2.
3.
can
MENU
PR
press the MENU button to return to normal TV
Virtual
mode, AVL
or
DBS is not available.
VOL
OK
VOL
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency
on the X-WAVE pull-down menu.
PR
Sound
SSM
{
87.7OMHz
AVL
{
DBS
{
Balance
{
§Volume
{
X-WAVE
{
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
106.7OMHz
or
106.9OMHz
107.1OMHz
107.3OMHz
107.5OMHz
107.7OMHz
107.9OMHz
Off
()O}{O OKOMENU
4.
Match the TV's
frequency
Turbo sound selection
and the FM receiver's.
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo
Sound
off)
(Turbo
Sound
on)
19
Sound
adjustment
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
:
Stereo/Dual
When
reception
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo
signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
mono
for dual language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
If
a
ton
I/II
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
Time
Setting the
1.
2.
3.
4.
Setting
Time
clock
Press the MENU button and
Time menu.
Press the G button and then
Press the G button and then
Press the G button and then
then D / E
button to select the
D / E button to select Clock.
D / E button to adjust the hour.
D / E button to
adjust
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
the minute.
()O}{O OKOMENU
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
{
()O}{OOKOMENU
5.
6.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Setting
viewing.
the On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
MENU
PR
function.
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
OK
VOL
Time
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
PR
Vol.30
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset and
the On/Off time is off.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
21
Other functions
TV and AV modes
Special
Language
Input
{
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when a video
other equipment is connected to the set.
or
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
()O}{O OKOMENU
Press the MENU button and then D / E
Special
2.
3.
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4 (option), COMPONENT1 or COMPONENT2
or RGB PC (option) on the Input pull-down menu.
Special
TV/AV
Language
Input
{
{
TV
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
AV1
AV2
AV3
AV4
COMPONENT1
COMPONENT2
()O}OOKOMENU
MENU
PR
VOL
4.
PR
AV1 : VCR connected to the AV1 sockets on the set.
AV2 : VCR connected to the AV2 sockets on the set.
AV3 : VCR connected to the AV3 sockets on the set.
AV4 : VCR connected to the Euro scart socket on the set (option)
COMPONENT 1/2 : DVD or SET-TOP Box connected to the
COMPONENT 1/2 sockets on the set
RGB PC : PERSONAL COMPUTER connected to the PC
INPUT socket on the set (option)
Repeatedly press the MENU button to return to normal TV
viewing.
Alternatively
1
2
3
you
TV/AV button.
4
5
6
In AV
7
8
9
Auto AV
0
can
select the TV
to return to TV
mode,
or
AV mode
mode, press the
by pressing
the
D / E or NUMBER buttons.
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV4 mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
: The
any button
Note
menus.
22
Child lock on will not appear
the front panel is pressed while
display
on
on
the
if
the
screen
displaying
Other functions
Blue back
Special
4.
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
2.
3.
Special
(option)
If you select On
ground appears
button to select the
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Repeatedly press the MENU button to return to normal TV
()O}{OOKOMENU
viewing.
Note : The blue
when there is no
background automatically
signal in AV mode.
appears
on
the
screen
Tilt
The TV
another
1.
picture may tilt to the left
position. This function can
Press the MENU button and then D / E
Special
2.
3.
4.
right if the TV set moves to
be used to compensate the tilt.
or
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on the
Tilt pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
VOL
VOL
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
PR
button to select the
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Repeatedly press the MENU button to return to normal TV
SLEEP
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
timer
Sleep
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
-
-
-
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
-
-
-
23
PIP
operation (option)
Option
PIP is
optional function,
so
that
only
the set with PIP function
operate.
can
PIP
:
an
(Picture
in
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch
press this button
Input
on
the sub
picture.
to switch it off.
again
mode selection for sub
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
PIP
Each time this button is pressed, each
displayed as shown below.
input
ture is
PR-
PR+
SWAP
Programme
INPUT
number
AV4
AV2
AV1
(option)
AV3
Note Yon can select the input mode for the sub picture, after
necting the external equipment.
:
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
con-
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
: When the sub picture
quality might get poor.
Note
SIZE
STILL
ture
picture
1/9 size
size is 1/2 of the main
picture
1/2 size
the
picture,
pic-
POSITION
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
24
position
is
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
TEXT
PR
reappears.
SIMPLE text
OK
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
PR
1
2
3
4
5
6
7
8
9
page.
colour button in LIST mode (option)
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
a
0
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
coloured button.
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in the
M
can
4.
same
way.
25
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1.
2.
PR
1
2
3
4
5
6
7
8
9
0
26
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays the
TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
PR
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
PR
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
?
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
change
the sub page, press the RED /
GREEN,
D / E but-
ton.
Press this button
again
to exit this function.
27
Connection of PC
RGB PC mode
You
as
1.
TV/AV
2.
adjust
prefer.
can
you
position,
horizontal/vertical size
Repeatedly press the TV/AV button to select the RGB PC
mode.
Press the MENU button and then D / E button to select the
Special
3.
(option)
horizontal/vertical
menu.
Press the G button and then D / E button to select PC
Setup.
Special
MENU
VOL
PR
OK
VOL
Input
Language
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
{
Tooset
()O}{OOKOMENU
4.
Press the G button and then D / E button to select V-Position,
V-Size, H-Position or H-Size on the PC Setup pull-down
menu.
5.
PR
Press the G button and then F / G button to make
appropriate
adjustments.
PC
Setup
V-Position
{
V-Size
H-Position
H-Size
{
0
{
{
()O}{OOKOMENU
6.
7.
V-Position
This function is to
adjust picture
V-Size
This function is to
change
H-Position
This function is to
adjust picture
H-Size
This function is to
change
to up
the vertical
to left
down
or
screen
or
the horizontal
you
prefer.
you
prefer.
as
size.
right
as
screen
size.
Press the OK button to store it for the PC monitor picture.
Repeatedly press the MENU button to return to normal PC
viewing.
PC in socket
1.
2.
S-VIDEOL/MN
3.
4.
AUDIO
R
AV3
PCINUT
PERSONAL COMPUTER
28
(option)
Connect the monitor output socket of the PERSONAL COMPUTER to the PC INPUT socket on the set.
Connect the audio cable from the PC to the AUDIO sockets on
the set.
Press the TV/AV button to select RGB PC.
Turn the PC on, and the PC picture appears on the screen.
The set can be operated as the PC monitor.
Note : Set the resolution of PC to VGA 640x480
mode to use this set as PC monitor.
(60 Hz)
video
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
VDEO
Y
PB
PR
L- AUDIO -R
Y
PB
PR
L- AUDO -R
COMPONENT1
(480i/480p/576i
/576p/1080i(60Hz))
DVD
/DTV
INPUT
COMPONENT2
Here shown may be somewhat different from your set.
VIDEO
(480p/576p
/1080i(60Hz))
L
AUDIO
OUT
4
R
VDEO
L
-AUDIO-
R
MONTOR
OUT
AV2
ANT IN
IN
LL 75‰
Aerial socket
AV1
IN
(MONO)
1.
Connect the RF out socket of the VCR to the aerial socket
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number
the 'Manual programme tuning' section.
4.
Select the programme number where the VCR channel
stored.
Press the PLAY button on the VCR.
5.
on
VCR
using
is
Y
PB
PR
L- AUDIO -R
Y
PB
PR
L- AUDO -R
VDEO
COMPONENT1
(480i/480p/576i
/576p/1080i(60Hz))
DVD
/DTV
INPUT
COMPONENT2
VIDEO
VDEO
L-AUDIO-
(480p/576p
/1080i(60Hz))
R
MONTOR
OUT
AV2
ANT IN
IN
LL 75‰
AV1
IN
(MONO)
Audio/Video in/out sockets
(option)
VCR
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sockets of the set.
2.
3.
If the VCR is connected to the AV sockets
TV/AV button to select AV1, AV2 or AV3.
Press the PLAY button
on
on
the set, press the
Y
PB
PR
L- AUDIO -R
PR
L- AUDIO -R
VIDEO
COMPONENT1
(480i/480p/576i
/576p/1080i(60Hz))
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
PB
the VCR.
(480p/576p
/1080i(60Hz))
L
AUDIO
OUT
4
The VCR
playback picture
appears
on
the
R
screen.
VIDEO
L-AUDIO-R
MONITOR
OUT
AV2
IN
ANT IN
L L75‰
AV1
IN
(MONO)
You
also record programmes received
via audio/video out sockets.
can
tape
by
the TV
on
video
VCR
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
S-VIDEOL/MN
(option)
1.
Connect the Euro scart socket of the VCR to the Euro scart
2.
socket of the set.
Press the PLAY button
AUDIO
R
If your VCR
socket, the
want to
AV3
on
the VCR.
switching voltage connect to Euro scart
automatically. But if you
watching TV mode, press the D / E or NUM-
outputs
a
set will switch to AV4 mode
keep
on
VCR
BER buttons.
Otherwise press the TV/AV button on the remote control handset to select AV4. The VCR playback picture appears on the
VIDEO
Y
PB
PR
COMPONENT1
(480i/480p/576i
/576p/1080i(60Hz))
DVD
/DTV
INPUT
screen.
COMPONENT2
(480p/576p
/1080(60Hz))
VIDEO
Y
PB
PR
L
AUDIO
OUT
4
R
You
can
tape.
also record programmes received
by
the TV
on
VIDEO
video
L-AUDIO-
R
MONITOR
OUT
ANT IN
AV2
IN
L L75‰
AV1
IN
(MONO)
VCR
29
Connection of external
equipment
S-Video/Audio in sockets
S-VIDEOL/MN
When
connecting
picture quality will
an
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
be further
socket, the
improved.
AUDIO
R
AV3
1.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
VCR
3.
4.
Select AV3 by pressing the TV/AV button
Press the PLAY button on the VCR.
The VCR
Y
VIDEO
PB
L- AUDIO -R
PR
COMPONENT2
(480p/576p
/1080i(60Hz))
VIDEO
PB
PR
L- AUDIO -R
L
AUDIO
OUT
4
R
VIDEO
appears
on
the
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
/DTV
INPUT
Y
playback picture
COMPONENT1
(480i/480p/576i
/576p/1080i(60Hz))
DVD
repeatedly.
L-AUDIO-R
MON TOR
OUT
AV2
IN
ANT IN
L L75‰
AV1
IN
(MONO)
Component
COMPONENT
(DVD)
1.
in sockets
Connect the COMPONENT video
output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT1 to the COMPONENT INPUT sockets (Y PB PR) on the set.
2.
Y
PB
PR
L- AUDIO -R
Y
PB
PR
L- AUDIO -R
VIDEO
Connect the audio cable from the COMPONENT to AUDIO IN sock-
COMPONENT1
(480i/480p/576i
576p/1080(60Hz))
DVD
/DTV
INPUT
ets of COMPONENT1.
COMPONENT2
(480p/576p
/1080(60Hz))
VIDEO
3.
L
AUDIO
OUT
Press the TV/AV button to select COMPONENT1.
4
4.
R
VIDEO
L-AUDIO-
R
MONTOR
OUT
Press the PLAY button
The COMPONENT
AV2
IN
ANT IN
LL 75‰
AV1
IN
COMPONENT
on
the COMPONENT.
playback picture
(MONO)
1.
Connect the HD-SET TOP
inputs
(Y
COMPONENT INPUT sockets
Y
PB
PR
L- AUDIO -R
COMPONENT2
(480p/576p
/1080i(60Hz))
VDEO
Y
PB
PR
L- AUDIO -R
the
screen.
of the COMPONENT2 to the
PB
PR)
on
the set.
2.
Connect audio
3.
Press the TV/AV button to select COMPONENT2.
COMPONENT1
(480/480p/576i
/576p/1080i(60Hz))
DVD
/DTV
INPUT
on
DTV in sockets
(DTV)
VIDEO
appears
to Audio sockets of COMPONENT2.
inputs
L
AUDIO
OUT
4
R
VIDEO
L-AUDIO-
R
MONITOR
OUT
ANT IN
Monitor out sockets
AV2
N
LL 75‰
AV1
N
(MONO
Connect the audio/video in sockets of the other TV
Audio out sockets
Y
PB
PR
L- AUDIO -R
VDEO
The
/DTV
INPUT
COMPONENT2
VIDEO
Y
PB
PR
L- AUDO -R
(480p/576p
/1080i(60Hz))
L
AUDIO
OUT
4
R
VDEO
L-AUDIO-
MONTOR
OUT
ANT IN
AV2
IN
LL 75‰
AV1
IN
(MONO)
VCR
30
R
monitor to
(AUDIO OUT) (option)
COMPON ENT1
(480i/480p/576i
576p/1080(60Hz))
DVD
or
MONITOR OUT sockets of the set.
Second TV
phono
sockets for
a
Hi-Fi
amplifier system
are on
the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
through
the stereo
amplifier system.
Connection of external
Headphone
socket
equipment
(option)
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the F / G button
on the
§Volume pull-down menu. See the 'Sound adjustment'
section.
Sound
S-VIDEOL/MN
AUDIO
R
SSM
{
Balance
{
AVL
{
DBS
{
SuperOwoofer
{
§Volume
{
AV3
PCINUT
3303(3I)
}{O I/IIO OKOMENU
If you press the MUTE button, only the sound from the TV's speakers
are switched off.
When a programme is received in dual language, you can select
a language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
31
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF

advertising