LG | 32LH35FR | LG 32LF20FR Owner’s Manual

ENGLISH
LCD TV
LED LCD TV
OWNER’S MANUAL
LCD TV MODELS
19LH2***
37LH5***
22LH2***
42LH5***
26LH2***
47LH5***
32LH2***
55LH5***
37LH2***
32LH6***
42LH2***
42LH6***
32LF2***
32LH7***
42LF2***
37LH7***
32LH3***
42LH7***
37LH3***
47LH7***
42LH3***
32SL8***
47LH3***
42SL8***
19LU5***
47SL8***
22LU5***
55SL8***
26LU5***
LED LCD TV MODELS
42LH9***
47LH9***
42SL9***
47SL9***
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record the model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Only 32/42/47/55SL8***
(Only 26/32/37/42LH2***, 32/42LF2***,
26LU5***, 32/37/42LH3***, 37/42LH5***,
32/42LH6***, 32/37LH7***, 42LH9***)
(Except 55SL8***)
x8
Bolts for stand
assembly
(Refer to p.20)
Cable management
clip
(Refer to p.25)
Protection Cover
(Refer to p.22)
Cable Holder
(Refer to p.25)
1-screw for stand fixing
(Refer to p.23)
Only 42/47SL9***
PO
W
ER
EN
ON
/O
FF
ER
GY
1
4
x3
x4
EN
U
Cable management
clip
(Refer to p.25)
Bolts for stand assembly
(Refer to p.20)
OK
Cable Holder
(Refer to p.25)
PU
T
9
Q.V
UT
E
Q.M
EN
U
P
E
G
A
P
OK
RET
UR
N
Batteries
Remote Controls
Wall Mounting Bracket(Separate purchase)
RW120
RW230
AW-47LG30M
(19/22LH2***,
19/22LU5***)
(26/32LH2***, 32LF2***
26LU5***, 32LH3***,
32LH6***, 32LH7***,
32SL8***)
(32/37/42LH2***, 32/42LF2***,
32/37/42/47LH3***,
37/42/47LH5***, 32/42LH6***,
32/37/42/47LH7***, 42/47LH9***,
32/42/47SL8***, 42/47SL9***)
Use screws 12mm(+0.5/-0.5) long on the SET assembly side.(Separate purchase)
(Only 42/47LH7***, 42/47SL8***, 42/47SL9***)
Set assembly side
(with guide spacer)
Set assembly side
(without guide spacer)
12mm
12mm
Guide spacer
x2
TV
/IN
PU
T
IEW
M
RA
TIO
16mm
TV
IN
3
6
0
MA
FA RK
V /
M
20mm
5
8
T
MO AV
DE
2
7
LIS
SA
VING
AW-55LH40M
(55LH5***, 55SL8***)
ACCESSORIES
This item is not included for all models.
Batteries (Except 42/47SL9***)
ACCESSORIES
Ensure that the following accessories are included with your TV.
If an accessory is missing, please contact the dealer where you purchased the TV.
■ Here shown may be somewhat different from your TV.
RATIO
RA
ENERGY SAVING
SLEEP
POWER
POWER
ON/OFF
TV
TV
AV
V MODE
AV
V MODE
Owner’s Manual
RATIO
POWER
RATIO
RA
TIO
Polishing Cloth
Polishing cloth for use on the screen.
POWER
AV MODE
ENERGY SAVING
AV
V MODE
ENERGY SA
SAVING
VING
AV
V MODE
ENERGY SA
SAVING
VING
LIST
Q.VIEW
LIST
Q.VIEW
LIST
Q.VIEW
AV MODE
ENERGY SAVING
LIST
Q.VIEW
MARK
MARK
MUTE
MUTE
MENU
or
MUTE
MENU
RETURN
or
MUTE
or
or
RETURN
MARK
FAV
MARK
FAV
Q.MENU
Power Cord
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
FAV
FAV
Q.MENU
Do not use excessive force. This may cause
scratching or discolouration.
Remote Controls (Except 42/47SL9***)
Only 32/37/42/47LH7***
(Only 37/42/47LH7***)
Cable management clip
(Refer to p.25)
(32LH7*** only)
Protection cover
(Refer to p.22)
(37LH7*** only)
x7
(42LH7*** only)
x3
x8
M4x20
M4x20
Stand rear cover
(Refer to p.23)
(47LH7*** only)
x4
M4x20
Protective Bracket and Bolt for Power Cord
(Refer to P.27)
x8
M4x16
USB extension cable
Make sure to use the provided USB extension cable,
Which is specially designed for a slim fit.
M4x16
bolts for stand assembly (Refer to p. 19)
O n l y 1 9 / 2 2 / 2 6 L U 5* * *
Only 19/22LH2***
x2
(Only 19/22LU5***)
Cable Holder
(Refer to p.24)
x3
(Only 26LU5***,)
Bolts for stand assembly
(Refer to p.18)
Only 26/32/37/42LH2***, 32/37/42/47LH3***,
37/42/47/55LH5***, 32/42LH6***, 42/47LH9***
Cable management clip
(Refer to p.24)
Protection cover
(Refer to p.21)
Only 32/42LF2***
(Except 55LH5***)
or
x4
x4
or
x4
Bolts for stand assembly
(Refer to p.19)
Protection cover
(Refer to p.22)
Bolts for stand assembly
(Refer to p.18)
Protection Cover
(Refer to p.22)
1
CONTENTS
ACCESSORIES
............................................
1
PREPARATION
CONTENTS
Front Panel Controls..................................................... 4
Back Panel Information .............................................. 12
Stand Installation......................................................... 18
Not Using the desk-type stand ................................21
Attaching the TV to a desk ........................................23
Swivel Stand ................................................................. 23
To Use The Stand Rear Cover ..................................23
Positioning your display ........................................... 23
Back Cover for Wire Arrangement.......................... 24
Detaching Stand.......................................................... 26
Kensington Security System ......................................26
Careful Installation Advice .........................................27
How to Secure the Power Cable ............................. 27
Desktop Pedestal Installation................................... 27
Wall Mount: Horizontal Installation........................ 28
Antenna Connection .................................................. 29
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup...................................................... 30
DVD Setup......................................................................33
VCR Setup..................................................................... 35
Other A/V Source Setup............................................37
External Stereo Setup ................................................ 38
AV Output Setup ........................................................ 39
Usb in Setup..................................................................40
PC Setup........................................................................ 41
- Screen Setup for PC Mode .............................. 44
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions.................................48
Turning on the TV....................................................... 57
Programme Selection ................................................ 57
Volume Adjustment ................................................... 57
Quick Menu ................................................................. 58
On-Screen Menus Selection and Adjustment..... 59
Auto Programme Tuning............................................ 60
2
Manual Programme Tuning ....................................... 61
Programme Edit ........................................................... 63
Selecting the Programme List.................................. 65
Favourite Programme Setup...................................... 66
Input List........................................................................ 67
Input Label .....................................................................68
..................................................................69
Key Lock......................................................................... 71
Initializing(Reset to original factory settings) ..... 72
AV Mode........................................................................ 73
TO USE THE BLUETOOTH
Precautions when using the Bluetooth ................. 74
Setting the Bluetooth................................................. 75
Set TV PIN......................................................................76
Bluetooth headset
- Connecting a new Bluetooth headset .............77
- Connecting to Bluetooth headset already
registered................................................................... 77
- Disconnecting the Bluetooth headset during use....78
- When requesting to connect to TV from the
Bluetooth headset....................................................78
Managing Registered Bluetooth device ................ 79
My Bluetooth Information. ........................................80
Receiving photos from external Bluetooth device .........81
Listening to the musics from external Bluetooth device81
TO USE A USB DEVICE
When connecting the USB device.......................... 82
Photo List ...................................................................... 83
Music List........................................................................87
Movie List .......................................................................90
Divx Registration Code...............................................93
Deactivation...................................................................94
TIME SETTING
Picture Size (Aspect Ratio) Control....................... 95
Clock Setup................................................................. 121
Auto On/ Off Timer Setting ....................................122
Sleep Timer Setting .................................................. 122
Energy Saving.................................................... 97
Preset Picture Settings
- Picture Mode-Preset............................................ 98
Manual Picture Adjustment
- Picture Mode-User option................................. 99
Picture Improvement Technology......................... 100
Expert Picture Control............................................. 101
Picture Reset .............................................................. 104
LED Local Dimming................................................... 105
Power Indicator ...........................................................106
Demo Mode................................................................ 107
Mode Setting.............................................................. 108
SOUND & LANGUAGE CONTROL
Auto Volume Leveler..................................................109
Preset Sound Settings - Sound Mode ................. 110
Sound Setting Adjustment - User Mode ............. 111
SRS TruSurround XT ................................................. 111
Ultra Sound ................................................................. 112
Clear Voice ll................................................................ 113
Balance.......................................................................... 114
TV Speakers On/ Off Setup ................................... 115
Selecting Audio Out.................................................. 116
Audio Reset...................................................................117
I/II
- Stereo/Dual Reception...................................... 118
- NICAM Reception............................................................ 119
- Speaker Sound Output Selection .................. 119
On-Screen Menu Language Selection....................... 120
TELETEXT
CONTENTS
PICTURE CONTROL
Switch on/off.............................................................. 123
SIMPLE Text..................................................................123
TOP Text ...................................................................... 123
FASTEXT .......................................................................124
Special Teletext Functions....................................... 124
APPENDIX
Troubleshooting......................................................... 125
Maintenance ...............................................................127
Product Specifications............................................. 128
IR Codes ...................................................................... 133
External Control Device Setup .............................. 135
3
PREPARATION
FRONT PANEL CONTROLS
■
Here shown may be somewhat different from your TV.
CAUTION
G
PREPARATION
When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control.)
Only 19/22/26/32/37/42LH2***, 32/37/42/47LH3***
Only 19/22/26LH2***
MENU
INPUT
OK
VOLUME
PROGRAMME
POWER
INPUT MENU
OK
P
Only 32/37/42LH2***,
32/37/42/47LH3***
PROGRAMME
P
VOLUME
OK
OK
Remote Control Sensor
MENU
MENU
INPUT
INPUT
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
ON
OFF
Main Power Switch
Except 19/22LH2***
4
PREPARATION
P
■
Here shown may be somewhat different from your TV.
Only 19/22/26LU5***
Only 26LU5***
Only 19/22LU5***
POWER INPUT MENU
OK
VOLUME
PROGRAMME
PROGRAMME
P
INPUT MENU
OK
P
VOLUME
P
P
OK
OK
MENU
MENU
INPUT
INPUT
POWER
ON
OFF
Main
Power
Switch
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates white when the TV is switched on.
5
PREPARATION
■
Here shown may be somewhat different from your TV.
Only 32/42LF2***
PROGRAMME
P
PREPARATION
+
VOLUME
-
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
OK
OK
MENU
MENU
INPUT
INPUT
Remote Control Sensor
POWER Button
■
Here shown may be somewhat different from your TV.
Only 42/47SL9***
P
PROGRAMME
VOLUME
OK
OK
MENU
MENU
INPUT
INPUT
POWER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
OFF
ON
Main Power Switch
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates white when the TV is switched on.
6
■
Here shown may be somewhat different from your TV.
Only 37/42/47/55LH5***
VOLUME
PREPARATION
PROGRAMME
P
OK
OK
MENU
MENU
INPUT
INPUT
POWER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
OFF
ON
Main Power Switch
7
PREPARATION
■
Here shown may be somewhat different from your TV.
PREPARATION
Only 32/37/42/47LH7***
P
P
PROGRAMME
P
VOLUME
OK
OK
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
MENU
MENU
Moving LED
Remote Control Sensor
INPUT
INPUT
POWER(Touch Sensor)
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates Whitish when the TV is switched on.
Note: You can adjust P o w e r I n d i c a t o r in the
OPTION menu.
8
Main Power Switch
■
Here shown may be somewhat different from your TV.
PREPARATION
Only 42/47LH9***
P
PROGRAMME
VOLUME
OK
OK
MENU
MENU
INPUT
SPEAKER
INPUT
POWER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates white when the TV is switched on.
Main Power Switch
9
PREPARATION
■
Here shown may be somewhat different from your TV.
Only 32/42LH6***
PREPARATION
Power Indicator(Only 42LH6***)
• Illuminates blue when the TV is switched on.
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions.
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
Main Power Switch
POWER INPUT
10
MENU
OK
VOLUME
PROGRAMME
■
Here shown may be somewhat different from your TV.
Only 32/42/47/55SL8***
PREPARATION
Remote Control
Sensor
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions.
OFF
ON
Main Power Switch
(Only 42/47/55SL8***)
PROGRAMME
VOLUME
P
ON
OK
OK
MENU
INPUT
POWER
MENU INPUT
OFF
Main Power Switch
Power/Standby Indicator
(Only 32SL8***)
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
11
PREPARATION
ANTENNA IN
VIDEO
L(MONO) AUDIO
BACK PANEL INFORMATION
■
R
VARIABLE AUDIO OUT
Here shown may be somewhat different from your TV.
ANTENNA IN
VIDEO
L(MONO) AUDIO
R
Only 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***(Refer to p.13)
VARIABLE AUDIO OUT
Only 32/37/42/47LH3***, 32/37/42LH23**
Only 32/42LF2***
PREPARATION
2
IN 3
VIDEO
L(MONO) AUDIO
R
IN 2
11
1
VIDEO
VIDEO
ANTENNA
IN
VARIABLE AUDIO OUT
L(MONO) AUDIO
8
ANTENNA
IN
R
AV IN2
AV IN2
R
ANTENNA
IN
8
VARIABLE AUDIO OUT
ANTENNA IN
L(MONO) AUDIO
L(MONO) AUDIO
R
VARIABLE AUDIO OUT
VIDEO
2
VARIABLE AUDIO OUT
Only 19/22LH2***
Only 32/37/42/47LH3***, 32/37/42LH23**
3
2
VIDEO
L/MONO AUDIO
VIDEO
L(MONO) AUDIO
ANTENNA
IN
VARIABLE AUDIO OUT
RS-232C IN
(CONTROL)
R
ANTENNA
IN
USB IN
SERVICE ONLY
VARIABLE AUDIO OUT
HDMI
2
AUDIO IN
(RGB/DVI)
RGB IN (PC)
RGB IN (PC)
AUDIO IN
(RGB/DVI)
VIDEO
ANTENNA IN
L(MONO) AUDIO
L(MONO)
L(
MONO) AUDIO
R
HDMI 1
/DVI IN
R
VIDEO
IN
COMPONENT IN
COMPONENT IN
AV OUT
AV IN
7
8
10
9
7
HDMI
5
4
RS-232C IN
(CONTROL)
8
9
10
Only 32/42LF2***
Only 26/32/37/42LH20**
3
ANTENNA
IN
VARIABLE AUDIO OUT
OUT
VARIABLE AUDIO OUT
2
R
AUDIO
VIDEO
VARIABLE AUDIO OUT
AUDIO
L/MONO
L/
MONO AUDIO
ANTENNA IN
AV IN1
VIDEO
VIDEO
6
4
R
RS-232C IN
(CONTROL)
HDMI/DVI IN
3
2
6
5
4
3
2
6
USB IN
SERVICE ONLY
4
RS-232C IN
(CONTROL)
6
5
USB IN
SERVICE ONLY
2
RGB IN (PC)
HDMI/DVI IN
AUDIO IN
(RGB/DVI)
HDMI 1
/DVI IN
RGB IN (PC)
AUDIO IN
(RGB/DVI)
1
IN1
VIDEO
R
AUDIO
VIDEOL(MONO)
AUDIO
L(MONO)
L(
MONO)
VIDEO
R
IN
VIDEO
AUDIO
VIDEO
COMPONENT IN
12
8
R
AUDIO
OUT
COMPONENT IN
ANTENNA
ANTENNA
OUT IN IN
VARIABLE
AUDIO
OUT OUT
VARIABLE
AUDIO
ANTENNA
IN
VARIABLE AUDIO OUT
AV
AV
7
L(MONO)
L(
MONO) AUDIO
9
10
7
8
9
10
ANTENNA IN
VIDEO
L(MONO) AUDIO
R
VIDEO
VARIABLE AUDIO OUT
■
L/MONO AUDIO
R
11
Here shown may be somewhat different from your TV.
Only 19/22/26LU5***, 37/42/47/55LH5***, 42/47LH9***
VARIABLE AUDIO OUT
L(MONO) AUDIO
PREPARATION
IN 3
Only 26LU5***
VIDEO
2
IN 3
ANTENNA
IN
2
1
R
ON
ANTENNA
IN
OFF
VARIABLE AUDIO OUT
VIDEO
L(MONO) AUDIO
R
8
8
1
VARIABLE AUDIO OUT
ANTENNA
IN
AV IN2
VIDEO
Only 19/22/26LU5***
L/MONO AUDIO
ANTENNA IN
R
3
2
VIDEO
RS-232C IN
(CONTROL)
VARIABLE AUDIO OUT
HDMI/DVI IN
5
4
6
Only 26LU5*** 2
L(MONO) AUDIO
R
AV IN2
VARIABLE AUDIO OUT
3
USB IN
ANTENNA
SERVICE
ONLY
IN
/DVI IN
2
RS-232C IN
(CONTROL)
AUDIO IN
(RGB/DVI)
2
RGB IN (PC)
RGB IN (PC)
AUDIO IN
(RGB/DVI)
1(DVI)
VIDEO
L(MONO) AUDIO
R
1(DVI)
ANTENNA
IN
VARIABLE AUDIO OUT
AUDIO
VIDEO
VARIABLE
AUDIO OUT
VARIABLE
AUDIO OUT
ANTENNA
ANTENNA
IN
IN
AV OUT
1
2
8
9
VIDEO
L(MONO) AUDIO
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
VARIABLE AUDIO OUT
4
RGB IN Input
Connect the output from a PC.
6
7
AV OUT
8
ANTENNA
IN
9
10
7
Component Input
Connect a component video/audio device to
these jacks.
8
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
9
AV Output
VIDEO
L/MONO AUDIO R
Connect second TV or monitor
to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier VARIABLE
or add
a subwoofer
AUDIO OUT
ANTENNA
to your surround sound system.
IN
R
RS-232C IN PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
VARIABLE AUDIO OUT
AUDIO
COMPONENT IN
10
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
3
5
R
1
COMPONENT IN
7
L/MONO
L/
MONO AUDIO
2
AV IN1
AV IN
VIDEO
VIDEO
AV IN1
R
VIDEO VIDEO
R
AUDIO AUDIO
L(MONO)
L(
MONO) L(MONO)
6
4
ANTENNA
IN
10
Antenna Input
Connect RF antenna to this jack.
11
USB IN Input
Connect USB storage device to this jack.
SERVICE ONLY PORT
RGB/DVI Audio Input
Connect the audio from a PC.
13
PREPARATION
■
Here shown may be somewhat different from your TV.
Only 32/42LH6***
PREPARATION
IN 3
9
1
VIDEO
L/MONO AUDIO
2
2
R
3
VARIABLE AUDIO OUT
/DVI IN
4
ANTENNA
IN
AUDIO IN
(RGB/DVI)
2
RGB IN (PC)
1(DVI)
6
L/MONO
L/
MONO AUDIO
R
2
1
AV IN1
VIDEO
VIDEO
VIDEO
VARIABLE AUDIO OUT
AUDIO
COMPONENT IN
L/MONO AUDIO
R
AV OUT
VARIABLE AUDIO OUT
5
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
3
4
5
14
6
AV IN2
ANTENNA
IN
7
ANTENNA
IN
8
6
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
7
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
RGB IN Input
Connect the output from a PC.
8
Antenna Input
Connect RF antenna to this jack.
RGB/DVI Audio Input
Connect the audio from a PC.
9
USB IN Input
Connect USB storage device to this jack.
Component Input
Connect a component video/audio device to
these jacks.
■
Here shown may be somewhat different from your TV.
Only 32/37/42/47LH7***
8
3
2
1(DVI)
2
1
4
3
RGB IN
VARIABLE AUDIO OUT
3
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
4
RS-232C IN PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
5
Component Input
Connect a component video/audio device to
these jacks.
AV OUT
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
RS-232C IN
(CONTROL)
R
AUDIO
R
5
RGB IN Input
Connect the output from a PC.
RGB/DVI Audio Input
Connect the audio from a PC.
L/MONO
L/
MONO AUDIO
2
VARIABLE AUDIO OUT
2
VIDEO
AV IN1
COMPONENT IN
VIDEO
L/MONO AUDIO
VIDEO
AUDIO IN
(RGB/DVI)
AV IN2
RGB IN (PC)
1
PREPARATION
/DVI IN
9
6
ANTENNA IN
ANTENNA IN
7
6
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
7
Antenna Input
Connect RF antenna to this jack.
8
USB IN Input
Connect USB storage device to this jack.
9
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
15
PREPARATION
■
Here shown may be somewhat different from your TV.
3
2
IN
4
1
2
VIDEO
2
VIDEO L/MONO AUDIO R
AV IN 2
AV IN 2
5
AV IN 2
AUDIO IN
(RGB/DVI)
RGB IN (PC)
/DVI IN
AV IN 2
4
VIDEO L/MONO AUDIO R
1
9
IN 3
VIDEO L/MONO AUDIO R
PREPARATION
VIDEO L/MONO AUDIO R
Only 32/42/47/55SL8***
L/MONO AUDIO
R
AV IN 1
VIDEO
2
L/MONO AUDIO
VIDEO
R
VARIABLE AUDIO OUT
VARIABLE AUDIO OUT
L/MONO
L/
MONO AUDIO
VIDEO
R
1
VIDEO
AUDIO
VARIABLE AUDIO OUT
COMPONENT IN
AV OUT
6
16
R
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI IN Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
3
RGB IN Input
Connect the output from a PC.
4
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
RGB/DVI Audio Input
Connect the audio from a PC.
ANTENNA
IN
8
7
1
5
L/MONO AUDIO
VARIABLE AUDIO OUT
6
Component Input
Connect a component video/audio device to
these jacks.
7
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
8
Antenna Input
Connect RF antenna to this jack.
9
USB IN Input
Connect USB storage device to this jack.
■
Here shown may be somewhat different from your TV.
Only 42/47SL9***
CAUTION
IN 3
2
Use a product with the following thickness
for optimal connection to HDMI cable (only
HDMI IN 3) / USB device.
*A 10mm
1
2
4
3
5
PREPARATION
G
10
6
RS-232C IN
(CONTROL)
IN
RGB IN (PC)
/DVI IN
1
2
VIDEO
VIDEO
L/MONO AUDIO
L/MONO AUDIO
R
AUDIO IN
(RGB/DVI)
R
AV IN
VARIABLE AUDIO OUT
2
VARIABLE AUDIO OUT
VIDEO
L/MONO
L/
MONO AUDIO
R
1
VIDEO
AUDIO
VARIABLE AUDIO OUT
COMPONENT IN
AV OUT
7
8
ANTENNA
IN
9
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI IN Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
3
RGB IN Input
Connect the output from a PC.
4
RS-232C IN PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
5
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
6
RGB/DVI Audio Input
Connect the audio from a PC.
7
Component Input
Connect a component video/audio device to
these jacks.
8
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
9
Antenna Input
Connect RF antenna to this jack.
10
USB IN Input
Connect USB storage device to this jack.
17
PREPARATION
STAND INSTALLATION
■ Here shown may be somewhat different from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can
tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion
of the tightening part of the bolt.
Only 19/22LH2***
PREPARATION
1
2
Only 32/42LF2***
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
Assemble the TV as shown.
Stand Body
Stand Base
Cover Base
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
Only 19/22/26LU5***
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Fix the 2 or 3 bolts securely using the holes as
shown.
(Only 26LU5***)
18
■
Image shown may differ from your TV.
1
2
Only 32/37/42/47LH7***
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
PREPARATION
Only 26/32/37/42LH2***,
32/37/42/47LH3***,
37/42/47LH5***, 32/42LH6***,
42/47LH9***
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
Assemble the TV as shown.
47LH7***
32LH7***
Stand Body
M4x20
37LH7***
M4x16
M4x20
Stand Base
42LH7***
M4x20
3
Stand Body
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Base
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
32/37LH7***
M4x20
42/47LH7***
M4x16
19
PREPARATION
■
Image shown may differ from your TV.
Only 32/42/47SL8***
Only 42/47SL9***
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
PREPARATION
1
Stand Body
Stand Body
20mm
Stand Base
Stand Base
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
16mm
20
NOT USING THE DESK-TYPE STAND
■
Here shown may be somewhat different from your TV.
When installing the wall-mounted unit, use the protection cover.
Only 19/22LH2***
PREPARATION
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Loose the bolts from TV.
3
Detach the S t a n d B o d y from T V.
4
Insert the P r o t e c t i o n C o v e r into the TV.
Protection Cover
5
Fix the 4 bolts securely using the holes in the
back of the TV.
21
PREPARATION
Only 26/32/37/42LH2***,
32/37/42/47LH3***, 37/42/47/55LH5***,
32/42LH6***
Only 42/47LH9***
After removing the protection paper from the protection cover, adhere it to the TV as shown.
PREPARATION
Insert the P R O T E C T I O N C O V E R
into the TV until clicking sound.
Only 32/42/47/55SL8***
Only 32/42LF2***
Insert the
PROTECTION
C O V E R into the TV
until clicking sound.
Insert the P R O T E C T I O N
C O V E R into the TV until
clicking sound.
Only 32/37/42/47LH7***
PROTECTION COVER
After removing the protection paper
from the protection cover, adhere it
to the TV as shown.
22
PROTECTION COVER
ATTACHING THE TV TO A
DESK
■ Here shown may be somewhat different from your TV.
The TV must be attached to desk so it cannot be pulled
in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached
screw.
TO USE THE STAND REAR
COVER (37/42/47LH7*** only)
■
Here shown may be somewhat different from your TV.
Install the S T A N D R E A R C O V E R as shown.
PREPARATION
Only 26/32/37/42LH2***,
32/42LF2***, 32/37/42LH3***,
26LU5***, 37/42LH5***,
32/42LH6***, 32/37LH7***,
42LH9***
STAND REAR COVER
1-Screw (provided as parts of the product)
Grip the knob in your fingers and pull it.
Stand
Desk
! WARNING
To prevent TV from falling over, the TV should
be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the
machine may cause injury.
G
POSITIONING YOUR DISPLAY
(Only 19/22LH2***)
■
Here shown may be somewhat different from your TV.
Adjust the position of the panel in various ways for
maximum comfort.
■
SWIVEL STAND
• Tilt range
(Except 19/22/26LU5***, 19/22LH2***)
12
0
0
3
■
This feature is not available for all models.
After installing the TV, you can adjust the TV manually
to the left or right direction by 20 degrees to suit your
viewing position.
■
! NOTE
G
The following model is a fixed stand type
model without the Tilt and Swivel features so
excessive pressure may damage the set.
- 19/22/26LU5***
23
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■
Here shown may be somewhat different from your TV.
Only 19/22LH2***
PREPARATION
1
2
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Only 19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***,
37/42/47/55LH5***, 32/42LH6***,
42/47LH9***
1
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the manual.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
Install the CABLE MANAGEMENT CLIP as shown.
CABLE MANAGEMENT CLIP
CABLE MANAGEMENT CLIP
3
Fit the CABLE MANAGEMENT CLIP as shown.
How to remove the CABLE MANAGEMENT CLIP(Only 19/22LH2***)
G
24
Hold the CABLE MANAGEMENT CLIP with both hands
and pull it backward.
3
Fit the C A B L E M A N A G E M E N T C L I P as
shown.
Only 19/22/26LU5***
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
Only 32/37/42/47LH7***
1
FOR DESK-TYPE STAND
1
Install the CABLE MANAGEMENT CLIP as
shown.
PREPARATION
Align the hole with the tab on the C A B L E
M A N A G E M E N T C L I P.
Turn the C A B L E M A N A G E M E N T C L I P as
shown.
Note : that excessive force might cause damage to the product when using Cable
Management clip.
Only 32/42/47/55SL8***,
42/47SL9***
CABLE MANAGEMENT CLIP
2
CABLE MANAGEMENT CLIP
2
Connect the cables as necessary.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
Connect the cables as necessary. To connect
additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
FOR WALL MOUNT
1
After Connecting the cables as necessary,
install CABLE HOLDER as shown and bundle
the cables. To connect additional equipment,
see the E x t e r n a l e q u i p m e n t S e t u p section.
CABLE HOLDER
! NOTE
not use the CABLE MANAGEMENT CLIP to
lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
G Do
25
PREPARATION
DETACHING STAND
■
Here shown may be somewhat different from your TV.
Only 19/22/26LU5***
PREPARATION
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Loose the bolts and then detach the stand from
TV.
(Only 26LU5***)
3
Loose the bolts and then detach the C o v e r
B a s e from T V.
Cover Base
4
Detach the S t a n d B o d y from T V.
Stand Body
26
(Only 26LU5***)
KENSINGTON SECURITY SYSTEM
■
■
This feature is not available for all models.
Here shown may be somewhat different from your TV.
The TV is equipped with a Kensington Security
System connector on the back panel. Connect the
Kensington Security System cable as shown below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s guide
provided with the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for
expensive electronic equipment such as notebook
PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the TV feels cold to the touch, there may be a
small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time.
Doing so may produce some temporary distortion
effects on the screen.
CAREFUL INSTALLATION ADVICE How to secure the power cable
(Only 32/37/42/47LH7***)
Secure the power cable with the PROTECTIVE BRACKET
and the bolt as shown. It will help prevent the power cable
from being removed by accident.
Bolt
PREPARATION
You should purchase necessary components to fix the TV
safety and secure to the wall on the market.
A Position the TV close to the wall to avoid the possibility
of it falling when pushed.
A The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb
or hang from the TV.
A
1
1
PROTECTIVE BRACKET
2
2
A
1
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on
the wall.
2
A
The TV can be installed in various ways such as on
a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
3
Circuit breaker
DESKTOP PEDESTALINSTALLATION
3
Use a sturdy rope to tie the product for alignment. It
is safer to tie the rope so it becomes horizontal
between the wall and the product.
For adequate ventilation allow a clearance of 4”
(10cm) all around the TV.
4 inches
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough
to support the size and weight of the TV.
To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.
4 inches
4 inches
4 inches
27
PREPARATION
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed
by a qualified professional installer.
A First you connect the USB extension cable to the
USB IN terminal, and then hang it on the wall.(Only
32/37/42/47LH7***)
A
B
A
PREPARATION
! NOTE
Should Install wall mount on a solid wall perpendicular to
the floor.
G Should use a special wall mount, if you want to install it to
ceiling or slanted wall.
G The surface that wall mount is to be mounted on should
be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
G Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions
included with the mount.
G LG is not liable for any accidents or damage to property or
TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause
TV to fall and cause personal injury.
- Not following the recommended Installation method.
G
4 inches
4 inches
4 inches
55SL8***
47SL8***
42SL8***
32SL8***
400 * 400
200 * 200
200 * 200
200 * 100
M6
M6
M6
M4
4
4
4
4
47LH9***
42LH9***
200 * 200
200 * 200
M6
M6
4
4
47LH7***
42LH7***
37LH7***
32LH7***
200 * 200
200 * 200
200 * 200
200 * 100
M6
M6
M6
M4
4
4
4
4
42LH6***
32LH6***
200 * 200
200 * 100
M6
M4
4
4
55LH5***
47LH5***
42LH5***
37LH5***
400 * 400
200 * 200
200 * 200
200 * 200
M6
M6
M6
M6
4
4
4
4
26LU5***
22LU5***
19LU5***
200 * 100
100 * 100
100 * 100
M4
M4
M4
4
4
4
47LH3***
42LH3***
37LH3***
32LH3***
200 * 200
200 * 200
200 * 200
200 * 100
M6
M6
M6
M4
4
4
4
4
42LH2***
37LH2***
32LH2***
26LH2***
22LH2***
19LH2***
200 * 200
200 * 200
200 * 100
200 * 100
100 * 100
100 * 100
M6
M6
M4
M4
M4
M4
4
4
4
4
4
4
42LF2***
32LF2***
200 * 200
200 * 100
M6
M4
4
4
4 inches
4 inches
28
47SL9***
42SL9***
VESA Standard
(A * B)
Screw Quantity
200 * 200 M6
4
200 * 200 M6
4
Model
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■
■
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
PREPARATION
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
VIDEO
L/MONO AUDIO
R
ANTENNA IN
VIDEO
VARIABLE AUDIO OUT
L(MONO) AUDIO
R
ANTENNA
IN
VARIABLE AUDIO OUT
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
L(MONO) AUDIO
VARIABLE
AUDIO OUT
VARIABLE
AUDIO OUT
■
ANTENNA
IN
Signal
Amplifier
VHF
■
R
VARIABLE AUDIO OUT
VIDEO VIDEO
R
R
AUDIO AUDIO
L/MONO L/MONO
UHF
Antenna
VIDEO
ANTENNA
ANTENNA
IN
IN
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
29
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 37/42/47/55LH5*** models.
■
Here shown may be somewhat different from your TV.
■
HD RECEIVER SETUP
Connecting with a component cable
1
EXTERNAL EQUIPMENT SETUP
2
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
C o m p o n e n t 2 input source.
Signal
Component
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
1080p
30
O
O
(50/60Hz only)
(24Hz/30Hz/50Hz/60Hz)
2
1
VIDEO
AUDIO
COMPONENT IN
1
2
Connecting a set-top box with an HDMI cable
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2(Except 19/22LH2***) or H D M I I N
3 (Except 19/22/26/32/37/42LH20**, 32/42LF2***,
19/22LU5***) jack on the TV.
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
Select H D M I 1, H D M I 2(Except 19/22LH2***) or
H D M I 3(Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22LU5***)input source using the
I N P U T button on the remote control.
/DVI IN
2
1(DVI)
1
EXTERNAL EQUIPMENT SETUP
1
! NOTE
G Check
that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3,
flickering or no screen display can result. Please use the
latest cables that support at least HDMI version 1.3.
G We recommed less than 10m for HDMI cable, and recommend to use amplifier or repeater for more than that.
31
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to DVI cable
1
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
RS-232C IN
(CONTROL)
/DVI IN
AUDIO IN
(RGB/DVI)
2
RGB IN (PC)
1(DVI)
EXTERNAL EQUIPMENT SETUP
32
2
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
VIDEO
/MONO
AU
2
Y
PB
PR
R
L
1
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
VIDEO
1
4
Select H D M I 1 input source using the I N P U T button
on the remote control.
AUDIO
VARIABLE AUDI
COMPONENT IN
AV OUT
2
DVD SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
C o m p o n e n t 2 input source.
2
1
AUDIO
COMPONENT IN
1
2
Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP
5
VIDEO
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
33
EXTERNAL EQUIPMENT SETUP
Connecting the HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2(Except 19/22LH2***)
or H D M I I N 3(Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22LU5***) jack on the TV.
EXTERNAL EQUIPMENT SETUP
2
Select H D M I 1, H D M I 2(Except 19/22LH2***) or
H D M I 3(Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22LU5***) input source using the
I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating instructions.
/DVI IN
2
1(DVI)
1
! NOTE
G The
TV can receive video and audio signals simultaneously when using a HDMI cable.
If
the
DVD does not support Auto HDMI, you must set the output resolution appropriately.
G
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result.
Please use the latest cables that support at least HDMI version 1.3.
G We recommed less than 10m for HDMI cable, and recommend to use amplifier or repeater for
more than that.
34
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
AUDIO
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
VARIABLE AUDIO OUT
AV OUT
ANTENNA
IN
2
Wall Jack
EXTERNAL EQUIPMENT SETUP
/MONO
AV IN 1
VIDEO
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
VIDEO
L/MONO AUDIO
R
35
VIDEO
L(MONO) AUDIO
R
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
L
EXTERNAL EQUIPMENT SETUP
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
3
Select A V 1 input source using the I N P U T button on
the remote control.
If connected to A V I N 2, select A V 2 input source.
L/MONO
L/
MONO AUDIO
VARIABLE AUDIO OUT
ENT IN
! NOTE
AV OUT
1
S-VIDEO
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
R
R
AUDIO
2
G
VIDEO
AV IN1
1
VIDEO
L
ANT IN
R
OUTPUT
SWITCH
ANT OUT
or
1
AV IN2
S-VIDEO
VIDEO
OUTPUT
SWITCH
VIDEO
L(MONO) AUDIO
R
36
VARIABLE AUDIO OUT
L
R
ANT IN
ANT OUT
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
R
IN 3
L
1
Camcorder
or
RS 232C IN
(CONTROL)
AUDIO IN
(RGB/DVI)
Video Game Set
RGB IN (PC)
AV IN2
L
L/MONO
L/
MONO AUDIO
R
AV IN1
VIDEO
R
AUDIO
NT IN
VARIABLE AUDIO OUT
AV OUT
ANTENNA
IN
VIDEO
VIDEO
L/MONO AUDIO
L
EXTERNAL EQUIPMENT SETUP
VIDEO
R
R
1
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V 1 input source with using the I N P U T button on the remote control.
If connected to A V I N 2, select A V 2 input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
37
EXTERNAL EQUIPMENT SETUP
EXTERNAL STEREO SETUP
VIDEO
L
EXTERNAL EQUIPMENT SETUP
38
1
Connect the input jack of the stereo amplifier to the
V A R I A B L E A U D I O O U T jacks on the TV.
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
AUDIO
R
AUDIO
T IN
/MONO
VARIABLE AUDIO OUT
AV OUT
1
! NOTE
G
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
(G p . 1 1 5)
Select V a r i a b l e O u t in A U D I O menu to connect the
V A R I A B L E A U D I O O U T jacks.(G p . 1 1 6)
AV IN 1
Use to connected either an external amplifier, or add a sub-woofer
to your surround sound system.
ANTENNA
IN
AV OUTPUT SETUP
/MONO
AUDIO
R
to hook up the second TV or monitor.
VARIABLE AUDIO OUT
Connect the second TV or monitor to the TV’s AV OUT
jacks.
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
O
VARIABLE AUDIO OUT
AV OUT
ANTENNA
IN
1
! NOTE
G
G
Component, RGB, HDMI input sources cannot be used for
AV out.
We recommend to use the AV OUT jacks for VCR recording.
S-VIDEO
VIDEO
L
R
EXTERNAL EQUIPMENT SETUP
1
AV IN 1
VIDEO
The TV has a special signal output capability which allows you
39
EXTERNAL EQUIPMENT SETUP
USB IN SETUP
(except 19/22/26/32/37/42LH20**, 32/42LF2***, 19/22/26LU5***)
■
Here shown may differ from your TV.
EXTERNAL EQUIPMENT SETUP
40
IN 3
1
1
Connect the USB device to the U S B I N jack on the TV.
2
After connecting the U S B I N jacks, you use the U S B function. (G p .82)
PC SETUP
RS-232C IN
(CONTROL)
/DVI IN
AUDIO IN
(RGB/DVI)
RGB IN (PC)
This TV provides Plug and Play capability, meaning that the PC
adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
Turn on the TV and the PC.
4
Select R G B input source using the I N P U T button on
the remote control.
PB
PR
AUDIO
R
L
AUDIO
VIDEO
/MONO
VARIABLE AUDIO OUT
COMPONENT IN
AV OUT
1
RGB OUTPUT
2
EXTERNAL EQUIPMENT SETUP
1
VIDEO
AUDIO
41
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
HDMI-DTV mode
RGB-PC mode
EXTERNAL EQUIPMENT SETUP
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
720x400
640x480
800x600
1024x768
1280x768
1360x768
1280x1024
1920x1080
31.468
31.469
31.469
37.879
48.363
47.776
47.720
63.668
66.587
70.09
70.09
59.94
60.317
60.004
59.87
59.799
59.895
59.934
720x480
31.47
31.50
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.75
33.72
28.125
60.00
59.94
50.00
1920x1080p
67.432
67.5
56.250
27
33.75
59.94
60
50
24
30
Except 19LU5***, 19/22/26/32/37/42LH2***
42
! NOTE
Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
G We recommend using 1920x1080, 60Hz (Only
19LU5***, 19/22/26/32/37/42LH2***:
1360x768, 60Hz) for the PC mode, these
should provide the best picture quality.
G HDMI mode supports PCM audio format only.
G If the Audio setting is set to
Dolby/DTS/Bitstream in some DVDP/STB, make
sure to change the setting to PCM.
G
EXTERNAL EQUIPMENT SETUP
Avoid keeping a fixed image on the TV ’s screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
There
may be interference relating to resolution,
G
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate
or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G If the resolution of PC is over SXGA, there will
be no picture on the TV.(only HD Models)
G
43
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Screen Reset
Returns Position, Size and Phase to the factory default settings.
PICTURE
Move
Screen
OK
Move
Prev.
Resolution
E
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC], Component(except 480i, 576i).
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
0
Auto Config.
Position
To Set
R
G
Yes
Size
No
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
G
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
OK
Select Y e s.
3
4
5
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
44
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
PICTURE
Move
Screen
OK
Move
Prev.
E
Resolution
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
Auto Config.
D
Position
G
F
G
E
• Tint
0
R
G
Size
• Advanced Control
• Picture Reset
EXTERNAL EQUIPMENT SETUP
P o s i t i o n operates in Component(except 480i, 576i), RGB mode.
S i z e, P h a s e operate only in RGB mode.
Phase
Screen
Screen
Reset
1 MENU
Select P I C T U R E.
2
OK
Select S c r e e n.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
45
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
Screen
PICTURE
Move
• Contrast
Move
Resolution
G
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
0
Prev.
OK
E
EXTERNAL EQUIPMENT SETUP
This function works in the following mode: RGB[PC]
Auto Config.
1024 x 768
1280 x 768
1360 x 768
Position
R
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
46
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is
still not correct, your TV is functioning properly but needs further adjustment.
Screen
PICTURE
Move
Move
Prev.
OK
Resolution
E
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
0
Auto Config. G
To Set
Position
Yes
R
G
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase.
The displayed image will be unstable for a few seconds while the auto configuration is in progress.
No
Size
• Advanced Control
• Picture Reset
Screen
Screen
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
Phase
Reset
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB(PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run A u t o C o n f i g ..
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
47
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 42/47LH9***, 32/42/47/55SL8***)
When using the remote control, aim it at the remote control sensor on the TV.
POWER
TV
AV
V MODE
POWER Switches the TV on from standby or off to standby.
POWER
ON/OFF
ON/OFF Key lighting on or off.(Only 42/47LH9***)
TV
WATCHING TV / PROGRAMME CONTROL
TV Selects TV channel.
AV
V MODE
ENERGY SAVING Adjust the Energy Saving mode of the TV.
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 7 3)
INPUT External input mode rotate in regular sequence.
MARK
FAV
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme List.
Q.VIEW Returns to the previously viewed programme.
MARK
FAV
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
Q. MENU Select the desired quick menu source.(Aspect Ratio,
Clear Voice II, Picture Mode, Sound Mode, AUDIO,
Sleep Timer, Favourite, USB Device) (G p . 5 8)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
Enter to the
mode.
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only), P r o g r a m m e e d i t.
1
1
48
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 2 3)
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 6 9)
POWER
VOLUME UP Adjusts the volume.
/DOWN
ON/OFF
TV
FAV Displays the selected favourite programme.
AV
V MODE
MARK Check and un-check programmes in the USB menu.
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
MARK
FAV
SIMPLINK / Controls SIMPLINK or USB menu.
USB Menu
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
■
■
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
Close cover.
49
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 37/42/47/55LH5***, 32/42LH6***, 32/37/42/47LH7***)
When using the remote control, aim it at the remote control sensor on the TV.
RATIO Selects your desired picture format.
SLEEP Sets the sleep timer.
RATIO
ENERGY SAVING
SLEEP
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
ENERGY Adjust the energy saving mode of the TV.
SAVING
WATCHING TV / PROGRAMME CONTROL
Q. MENU Select the desired quick menu source.(Aspect Ratio,
Clear Voice II, Picture Mode, Sound Mode, AUDIO,
Sleep Timer, Favourite, USB Device) (G p . 5 8)
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(G p . 6 9)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
OK Accepts your selection or displays the current mode.
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
Enter to the
mode.
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 7 3)
1
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only), P r o g r a m m e e d i t.
1
50
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 2 3)
RATIO
ENERGY SAVING
VOLUME UP Adjusts the volume.
/DOWN
SLEEP
MARK Check and un-check programmes in the USB menu.
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
SIMPLINK / Controls SIMPLINK or USB menu.
USB Menu
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
51
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***, 19/22/26LU5***)
When using the remote control, aim it at the remote control sensor on the TV.
Enter to the
mode.
(Only 32/37/42LH23**, 32/37/42/47LH3***)
V MODE
AV MODE
ENERGY SAVING
RATIO Selects your desired picture format.
RATIO
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 7 3)
POWER
AV
V MODE
ENERGY SAVING
AV MODE
ENERGY SAVING
WATCHING TV / PROGRAMME CONTROL
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
ENERGY Adjust the energy saving mode of the TV.
SAVING
Q.VIEW
LIST
MUTE
0~9 number Selects a programme.
button Selects numbered items in a menu.
Q.VIEW
LIST
Q.VIEW
LIST
viewed programme.
Q.VIEW Returns to the previously
table.
LIST Displays the programme MUTE
MUTE
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
MENU
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
RETURN
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only), P r o g r a m m e e d i t.
MARK
FAV
1
Q.MENU
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 2 3)
FAV Displays the selected favourite programme.
MARK Check and un-check programmes in the USB menu.(Only
32/37/42LH23**, 32/37/42/47LH3***)
52
RATIO
POWER
AV
V MODE
ENERGY SAVING
VOLUME UP Adjusts the volume.
/DOWN
AV MODE
ENERGY SAVING
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
Q.VIEW
LIST
MUTE
LIST
Q.VIEW
MUTE
32/37/42LH23**,
SIMPLINK / Controls SIMPLINK or USB(Only
USB Menu 32/37/42/47LH3***) menu.
control buttons
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(G p . 6 9)
MENU
Q. MENU Select the desired quick menu source.(Aspect Ratio,
Clear Voice II, Picture Mode, Sound Mode, AUDIO, Sleep
Timer, Favourite, USB Device(Only 32/37/42LH23**,
32/37/42/47LH3***), Energy Saving(Except
32/37/42LH23**, 32/37/42/47LH3***)) (G p . 5 8)
RETURN
MARK
FAV
WATCHING TV / PROGRAMME CONTROL
PAGE Move from one full set of screen information to the next
UP/DOWN one.
Q.MENU
Installing Batteries
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
53
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 42/47SL9***)
When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the TV on from standby or off to standby.
POWER
ON/OFF
ON/OFF Key lighting on or off.
TV
TV Selects TV channel.
AV
MODE
INPUT
1
2
3
AV MODE It helps you select and set images and sounds when
connecting AV devices.(G p . 7 3)
4
5
6
INPUT External input mode rotate in regular sequence.
7
8
9
LIST
0
Q.VIEW
ENERGY SAVING Adjust the Energy Saving mode of the TV.
ENERGY SAVING
WATCHING TV / PROGRAMME CONTROL
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
MARK/
FAV
P
MUTE
MENU
RATIO
Q.MENU
P
A
G
E
Q.VIEW Returns to the previously viewed programme.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
RATIO Selects your desired Aspect Ratio of picture.
Q. MENU Select the desired quick menu source.(Aspect Ratio,
Clear Voice II, Picture Mode, Sound Mode, AUDIO,
Sleep Timer, Favourite, USB Device) (G p . 5 8)
OK
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
RETURN
OK Accepts your selection or displays the current mode.
Enter to the
mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.(G p . 6 9)
RETURN Allows the user to move return one step in an interactive
application or other user interaction function.
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only), P r o g r a m m e e d i t.
54
POWER
VOLUME UP Adjusts the volume.
/DOWN
ON/OFF
MARK Check and un-check programmes in the USB menu.
TV
AV
MODE
FAV Displays the selected favourite programme.
INPUT
ENERGY SAVING
MUTE Switches the sound on or off.
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the next
UP/DOWN one.
MARK/
FAV
P
P
A
G
E
SIMPLINK / Controls SIMPLINK or USB menu(Photo List and Music
USB Menu List or Movie List ).
control buttons
MUTE
MENU
RATIO
Q.MENU
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 2 3)
WATCHING TV / PROGRAMME CONTROL
1
OK
RETURN
Installing Batteries
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
55
WATCHING TV / PROGRAMME CONTROL
Simple Remote Control (Only 42/47SL9***)
When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the TV on from standby or off to standby.
TV/INPUT External input mode rotate in regular sequence.
TV/INPUT
VOLUME UP Adjusts the volume.
/DOWN
WATCHING TV / PROGRAMME CONTROL
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
0~9 number Selects a programme.
button Selects numbered items in a menu.
OK Accepts your selection or displays the current mode.
OK
Q.VIEW Returns to the previously viewed programme.
Installing Batteries
■
■
■
56
Open the battery compartment cover on
the back and install the batteries matching
correct polarity (+with +,-with -).
Install two 1.5V AAA batteries. Do not mix
old or used batteries with new ones.
Close cover.
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly and check the main power on the TV(Except 32/42LF2***).
At this stage, the TV switches to standby mode.
2
) button on the TV or
In standby mode to turn TV on, press the r / I, INPUT or P D E (or P
press the POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
Initializing setup
Note:
a.
b.
c.
d.
If you close without completing the initial setting, the Initial Setting menu can be displayed again.
“Store Demo” mode is only for shop display and not for general customer use.
"Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
"Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data,
“Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
e. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
WATCHING TV / PROGRAMME CONTROL
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, M o d e S e t t i n g, A u t o T u n i n g.
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ or - , AV Mode button.
57
WATCHING TV / PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• A s p e c t R a t i o: Selects your desired picture format.
• A U D I O : Selects the sound output.
• S l e e p T i m e r : Sets the sleep timer.
• F a v o u r i t e : Selects the favourite On or Off.
E n e r g y S a v i n g : Selects the Energy saving
•
WATCHING TV / PROGRAMME CONTROL
For Zoom Setting, select 16:9, Original, 4:3, 14:9,
Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to
Q.Menu.
• C l e a r V o i c e l l : By differentiating the human sound
range from others, it helps users listen to human voices better.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set
the sound combination which it deems the best for
the images being watched. Selects your desired
Sound Mode.
mode.
• U S B D e v i c e : Selects “Eject” in order to eject USB
device.
Only 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22/26LU5***
Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22/26LU5***
Q.Menu
Q.Menu
Aspect Ratio
F
16:9
Aspect Ratio
G
16:9
Clear Voice ll
3
Clear Voice ll
3
Picture Mode
Standard
Picture Mode
Standard
Sound Mode
Standard
Sound Mode
Standard
AUDIO
PR
F
AUDIO
MONO
Sleep Timer
Off
Favourite
Off
Energy Saving
G
Zoom Setting
Zoom Setting
PR
MONO
Sleep Timer
Off
Favourite
Off
Off
USB Device
Close
Eject
Close
1Q. MENU
Display each menu.
2
Select your desired Source.
3
OK
• Press the Q . M E N U button to return to normal TV viewing.
58
ON SCREEN MENUS SELECTION AND ADJUSTMENT
■ Here shown may be somewhat different from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
SETUP
Move
PICTURE
OK
Auto Tuning
Move
AUDIO
OK
Aspect Ratio : 16:9
Move
Auto Volume
Manual Tuning
Energy Saving
Programme Edit
Picture Mode : Vivid
: Off
Clear Voice ll
: Off
• Level
• Backlight
100
Balance
• Contrast
100
Sound Mode
50
• SRS TruSurround XT : Off
70
• Treble
50
• Colour
70
• Bass
50
E
TIME
OK
: Off
:1
Move
OK
Move
OK
Clock
SETUP
: On
Set ID
R
• Sharpness
: English
Key Lock
+
L
• Brightness
Input Label
SIMPLINK
-
PICTURE
AUDIO
TIME
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
Power Indicator
Demo Mode
: Off
Mode Setting
: Home Use
OPTION
INPUT
BLUETOOTH
USB
E
INPUT
Move
OK
BLUETOOTH
Move
OK
USB
TV
BLUETOOTH
: Off
Photo List
AV1
TV PIN
: 0000
Music List
AV2
Bluetooth Headset : Disconnected
Movie List
Component1
Registered Bluetooth Device
DivX Reg. Code
Component2
My Bluetooth Info.
Deactivation
WATCHING TV / PROGRAMME CONTROL
Move
Menu Language
0
0
: Standard
E
OPTION
OK
: Off
RGB
HDMI1
HDMI2
E
Except 32/37/42LH23**,
32/37/42/47LH3***,
37/42/47/55LH5***, 32/42LH6***
1 MENU
2
OK
Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22/26LU5***
Display each menu.
Select a menu item.
3
OK
Only 32/37/42/47LH7***, 42/47LH9***,
32/42/47/55SL8***, 42/47SL9***
Move to the pop up menu.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
59
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
SETUP
Move
OK
SETUP
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Move
OK
Check your antenna connection. The previous channel
information will be updated during Auto Tuning.
Yes
1 MENU
Select S E T U P.
No
• If you wish to keep on auto tuning select Y e s
using the
button. Then, press the OK button. Otherwise select N o.
2
OK
Select A u t o T u n i n g.
OK
Select Y e s.
OK
Run A u t o T u n i n g.
3
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
60
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Move
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
OK
Storage
1
F
System
G
BG
Band
V/UHF
0
Fine
F G
Search
F G
Name
C 02
Except
32/42/47/55SL8***,
42/47SL9***
Store
Close
1 MENU
Select S E T U P.
5
Select V / U H F or C a b l e.
6
2
OK
or
Select M a n u a l T u n i n g.
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
3
OK
or
1
2
3
4
5
6
7
8
9
Select the desired programme number on.
0
4
7
Commence searching.
WATCHING TV / PROGRAMME CONTROL
Channel
8
OK
Select a TV system.
Select S t o r e.
9
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• B G : PAL B/G, SECAM B/G (Asia / New Zealand / M.East / Africa)
I : PAL I/II (Hong Kong / South Africa)
D K : PAL D/K, SECAM D/K (China / Africa)
M : Philippines
• To store another channel, repeat steps 3 to 9.
61
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
OK
Auto Tuning
SETUP
Move
OK
Storage
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
F
System
1
G
BG
Band
V/UHF
Channel
0
Fine
F G
Search
F G
Name
Except
32/42/47/55SL8***,
42/47SL9***
C 02
Store
Close
WATCHING TV / PROGRAMME CONTROL
A
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
2
OK
3
OK
4
Select S E T U P.
OK
OK
Select M a n u a l T u n i n g.
5
Select N a m e.
OK
Select the position
and make your choice
of the second character, and so on.
You can use an the
alphabet A to Z , the
number 0 to 9 , +/ -,
and blank.
Select S t o r e.
6
OK
A
Fine Tuning (Except 32/42/47/55SL8***, 42/47SL9***)
Normally fine tuning is only necessary if reception is poor.
1 MENU
2
OK
Select S E T U P.
Select M a n u a l T u n i n g.
4
Fine tune for the best picture and
sound.
5
OK
Select S t o r e.
6
3
OK
OK
Select F i n e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
62
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
Move
C 01
OK
TV
0
1 C 01
Auto Tuning
2 C 05
3 BLN 2
Manual Tuning
4
5
Programme Edit
6
7
8
9
10
11
12
13
14
15
E
Pr. Change
Delete
1 MENU
Navigation
P
Page Change
Move
Previous
Skip
Select S E T U P.
WATCHING TV / PROGRAMME CONTROL
1
SETUP
2
OK
Select P r o g r a m m e E d i t.
3
OK
4
Enter the P r o g r a m m e E d i t.
Select a programme to be stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
63
WATCHING TV / PROGRAMME CONTROL
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
A
Deleting a programme
1
Select a programme number to be deleted.
2
• The selected programme is deleted, all the
following programmes are shifted up one
position.
RED Turn the deleted programme number to RED.
WATCHING TV / PROGRAMME CONTROL
3
RED Release the deleted programme.
A
Moving a programme
1
Select a programme number to be moved.
2
YELLOW
Turn the moved programme number to YELLOW.
3
YELLOW Release the moved programme.
A
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to BLUE.
3
64
Release the skipped programme.
• When a programme number is skipped it
means that you will be unable to select it using
the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER
buttons or select it in the programme edit.
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
1 C 01
2 C 05
3 BLN 2
A
Displaying programme list
1
Display the Programme List.
LIST
A
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
2
A
• You may find some blue programmes. These
WATCHING TV / PROGRAMME CONTROL
Exit
Select a programme.
OK
Switch to the chosen programme number.
Paging through a programme list
1
P
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
65
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME SETUP
A
Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without
having to wait for the TV to scan through all the in-between programmes.
To tune to a favorite programme, press the F A V(Favorite)button repeatedly.
Only 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22/26LU5***
Except 19/22/26/32/37/42LH20**,
32/42LF2***, 19/22/26LU5***
Q.Menu
Q.Menu
Aspect Ratio
16:9
1
Aspect Ratio
Zoom Setting
WATCHING TV / PROGRAMME CONTROL
3
Clear Voice ll
3
Picture Mode
Standard
Picture Mode
Standard
Sound Mode
Standard
Sound Mode
Standard
MONO
Sleep Timer
F
Energy Saving
Favourite
PR
Favourite
1
2
3
4
5
6
7
8
9
0
2Q. MENU
Off
F
Favourite
USB Device
Close
or
Select your desired
programme.
Select F a v o u r i t e.
MONO
Sleep Timer
G
P
A
G
E
G
3
Off
Eject
Close
4Q. MENU
Select F a v o u r i t e.
Return to TV viewing.
• This will automatically include the selected programme into your favourite programme list.
A
Displaying the favourite programme list
1 MARK
Favorite List
1 C 01
FAV
2 C 05
3 BLN 2
Exit
66
AUDIO
Off
Favourite
P
Zoom Setting
Clear Voice ll
AUDIO
PR
16:9
Display the Favourite Programme List.
INPUT LIST
■
Here shown may be somewhat different from your TV.
1
OK
INPUT
Select the input source.
Except 19/22/26/32/37/42LH2**, 32/42LF2***, 32/37/42/47LH3***, 19/22/26LU5***
TV
AV1
HDMI3
AV2
HDMI2
Component2
Component1
HDMI1
RGB
Except 19/22LH2***
Except 19/22/26/32/37/42LH20**, 32/42LF2***, 19/22LU5***
WATCHING TV / PROGRAMME CONTROL
Except 19/22/26/32/37/42LH20**, 19/22LU5***, 42/47SL9***
• T V : Select it when watching the TV.
• A V : Select it when watching the VCR or external equipment.
• C o m p o n e n t : Select it when using DVD or Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD or Digital set-top box depend on connector.
67
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
OPTION
Move
Menu Language
OK
: English
Input Label
OPTION
Move
Menu Language
OK
: English
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
: On
Power Indicator
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
E
E
WATCHING TV / PROGRAMME CONTROL
AV1
Except 19/22/26/32/37/42LH20**, 19/22LU5***, 42/47SL9***
F
G
AV2
Component1
Except 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***, 19/22/26LU5***
Component2
RGB
HDMI1
Except 19/22LH2***
Except 19/22/26/32/37/42LH20**, 32/42LF2***, 19/22LU5***
HDMI2
HDMI3
Close
1 MENU
Select OPTION.
2
OK
Select Input Label.
OK
Select the source.
3
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
68
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
O f f”.
If you do not want SIMPLINK menu,select “O
OPTION
Move
OPTION
OK
: English
Move
Menu Language
Input Label
OK
: English
Input Label
SIMPLINK
SIMPLINK
On
:: On
SIMPLINK
SIMPLINK
On
:: On
Off
Key Lock
: Off
Key Lock
Set ID
:1
Set ID
: Off
On
On
:1
Power Indicator
Power Indicator
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
E
1 MENU
E
3
Select O P T I O N.
OK
Select O n or O f f.
4
2
OK
Select S I M P L I N K.
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
WATCHING TV / PROGRAMME CONTROL
Menu Language
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn
on mode.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics
Control).
69
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
RS-232C IN
(CONTROL)
/DVI IN
AUDIO IN
(RGB/DVI)
2
RGB IN (PC)
1(DVI)
VIDEO
/MONO AUDIO
2
Y
PB
PR
AV IN 1
Connect the H D M I / D V I I N 1, H D M I I N 2(Except
19/22LH2***) or H D M I I N 3(Except
19/22/26/32/37/42LH20**, 32/42LF2***,
19/22LU5***) terminal on the back of the TV and the
HDMI output terminal of the Home Theater using
HDMI cables.
1
R
L
1
VIDEO
VARIABLE AUDIO OUT
AUDIO
AV OUT
COMPONENT IN
ANTENNA
IN
1
2
Connect the Audio output terminal on the back of the
TV and the Audio input terminal of the Home Theater
using RCA cables.
2
WATCHING TV / PROGRAMME CONTROL
Select Home Theater in the Speaker menu by pushing the
S I M P L I N K button.
3
G
Home Theater
When you select or operate a media device with home theater
function, the speaker automatically switches to home theater
speaker (HT speaker).
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMI
terminal) of the SIMPLINK device with the HDMI cable.
When
you switch the Input source using the INPUT button on the remote control, you can stop the
G
operation of a device controlled by SIMPLINK.
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker
to operate the Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is
set to the TV volume.
G
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
3
V C R p l a y b a c k : Play and control the connected
VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
5
Audio Out to Home theater/Audio Out to TV:
Select Home theater or TV speaker for Audio Out.
1
2
Selected Device
3
When device is not connected (displayed in gray)
4
When a device is connected
(displayed in bright colour)
5
F G
70
Change Device
OK
KEY LOCK
The TV can be set so that the remote control is required to control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was last set to even if you turn the TV off.
OPTION
Move
Menu Language
OK
: English
Move
Menu Language
OK
: English
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
Set ID
:1
Set ID
: On
Off
: Off
On
On: 1
Power Indicator
Power Indicator
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
E
: Off
: Home Use
E
Select O P T I O N.
O n’, if the TV is turned off, press the r / I,
• In K e y L o c k ‘O
OK
Select K e y L o c k.
) button on the TV or
INPUT, P D or E(or P
POWER, INPUT, P
or NUMBER buttons on the
remote control then the set will be turned on.
Key Lock On
• With the K e y L o c k O n, the display ‘
’ appears on the screen if any button on the front panel is
pressed while viewing the TV.
OK
Select O n or O f f.
2
3
4
OK
WATCHING TV / PROGRAMME CONTROL
Input Label
Input Label
1 MENU
OPTION
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
71
WATCHING TV / PROGRAMME CONTROL
INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
Use to quickly reset all the menu options to their original factory preset values.
This function deletes all TV programmes.
When the F a c t o r y R e s e t is completed, you must restart the Initializing setup.
OPTION
Move
OK
OPTION
E
E
WATCHING TV / PROGRAMME CONTROL
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
All user settings and channel
Off settings will be reset.
Still Continue?
: Home Use
Power Indicator
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
Factory Reset
Reset
Factory
2
OK
3
OK
4
OK
OK
Input Label
Input Label
1 MENU
Move
Factory
Factory Reset
Reset
: On
Yes
No
Select O P T I O N.
Select F a c t o r y R e s e t.
Select Y e s.
Start F a c t o r y R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
72
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
2
OK
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to
select the desired source.
• If you select C i n e m a in AV mode, C i n e m a will
be selected both for P i c t u r e M o d e and S o u n d
M o d e in P I C T U R E menu and A U D I O menu
respectively.
O f f” in A V m o d e, the picture and
• If you select “O
image which you initially set will be selected.
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
• Press the R E T U R N button to return to normal TV viewing.
73
TO USE THE BLUETOOTH
(Only 32/37/42/47LH7***, 42/47LH9***, 32/42/47/55SL8***, 42/47SL9***)
Bluetooth?
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange.
With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset or receive
images(only JPEG), listen to music from the Bluetooth enabled cell phone using this TV.
TO USE THE BLUETOOTH
• Communication Spec.: Bluetooth Specification Version 2.0 + EDR (Enhanced Data Rate)
• Output: Bluetooth Specification Power Class 2
• Maximum Communication Range: Line of open sight approx. 10m (30 ft)
• Frequency Band: 2.4 GHz band (2.4 GHz ~ 2.4835 GHz)
• Bluetooth Module: RBFS-C921A
• Compatible Bluetooth Profile: A2DP (Advanced Audio Distribution Profile)
OPP (Object Push Profile)
GAVDP (Generic Audio/Video Distribution Profile)
HSP (Headset Profile)
0700
FCC ID: BEJRBFS-C921A
Precautions when using the Bluetooth
Use within 10m(-45°~ 45°) range.
If you use the device out of the range or within the range with obstacles, it can result in communication
error.
G Communication error can occur depending on the surrounding devices.
G Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth.
G The device search time differs depending on the number of Bluetooth devices and the operating situation.
G The probability of search increases with less number of devices.
G Electromagnetic wave can be interfered with applicable wireless devices.
G Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot
provide services related to human life.
G You can only connect one Bluetooth device at a time.
G You cannot receive photos(only JPEG) or listen to music from other Bluetooth devices while using the
Bluetooth headset.
G For details of Bluetooth, refer to the user manual of the Bluetooth device.
G USB (Photo List, Music List, Movie List) and Bluetooth will not be supported at the same time.
G Operation is subject to the following two conditions : (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation (of the device).
G
QDID(Qualified Design Identity) : B015112
74
SETTING THE BLUETOOTH
If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an
external device and view them on the TV, listen to music from cell phone(Bluetooth device), you can use the
wireless communication without having to connect any cables.
O n”.
You can use the BLUETOOTH menu by selecting “O
O f f”.
If you do not want to use the Bluetooth function, select “O
If it is connected to the external Bluetooth device, you can select “Off” after disconnecting the device.
BLUETOOTH
Move
OK
BLUETOOTH
: Off
Bluetooth
TV PIN
: 0000
TV PIN
Move
OK
Off
: Off
On
On
: 0000
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth Device
Registered Bluetooth Device
My Bluetooth Info.
My Bluetooth Info.
1 MENU
Select B L U E T O O T H.
TO USE THE BLUETOOTH
Bluetooth
2
OK
Select B l u e t o o t h.
OK
Select O n or O f f.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
75
TO USE THE BLUETOOTH
SET TV PIN
To accept connection from an external Bluetooth device or to connect to an external Bluetooth device, the PIN
needs to be entered.
For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable
device.
The TV PIN is composed of numbers of up to 10 digits.
The TV PIN must have more than 1 digit.
BLUETOOTH
Move
OK
BLUETOOTH
Move
Bluetooth
: Off
Bluetooth
: Off
TV PIN
PIN
TV
0000
:: 0000
TV PIN
PIN
TV
0000
:: 0000
OK
Set TV PIN
Registered Bluetooth Device
Registered Bluetooth Device Delete
My Bluetooth Info.
My Bluetooth Info.
E
TO USE THE BLUETOOTH
Bluetooth Headset : Disconnected
0 0 0 0_
Bluetooth Headset : Disconnected
OK
1 MENU
Select B L U E T O O T H.
2
OK
3
OK
Select T V P I N.
1
2
3
4
5
6
7
8
9
• The default TV PIN number is ‘0,0,0,0’, and it
can be changed by the user.
• Press the
button to delete digits one by
one.
Select the desired PIN number.
0
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
76
BLUETOOTH HEADSET
When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset through wireless communication.
You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device.
A maximum of 12 devices can be paired.
When the unit is searching for the Bluetooth headset, other buttons except for the “Stop” (OK button) do not work.
Connecting a new Bluetooth headset
You can only search for the new Bluetooth headset only in the D i s c o n n e c t e d condition.
When you run the search, it will show you the list of all Bluetooth headsets responding.
After new Bluetooth device is searched, the PIN number is validated to connect the device. For details, refer to
the user manual of the applicable device.
4
Select B L U E T O O T H.
OK
1
2
3
4
5
6
7
8
9
0
2
OK
Select Bluetooth headset PIN number.
Refer to the user manual of the applicable
device for the PIN number.
5
OK
Select B l u e t o o t h H e a d s e t.
Connect the Bluetooth headset.
3
OK
GREEN Search the Bluetooth headset.
TO USE THE BLUETOOTH
1 MENU
Connecting to Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top.
When connecting to the Bluetooth device already registered, you can select and connect directly without any PIN validation.
1 MENU
Select B L U E T O O T H.
2
OK
Select B l u e t o o t h H e a d s e t.
4
OK
Message asking to connect the selected
Bluetooth headset will be displayed.
Select Y e s or N o.
5
OK
Connect the Bluetooth headset.
3
OK
Select the desired Bluetooth headset.
• After connecting/using the Bluetooth headset, the headset setting will be the D i s c o n n e c t e d condition automatically
when you turn off the power of the TV and then turn on.
• After connecting the Bluetooth headset, the TV speaker is switched to Mute condition and the sound will only be generated from the headset.
77
TO USE THE BLUETOOTH
Disconnecting the Bluetooth headset during use
1 MENU
3
Select B L U E T O O T H.
OK
Disconnect the Bluetooth headset.
2
OK
OK
Select B l u e t o o t h H e a d s e t.
When requesting to connect to TV from the Bluetooth headset
TO USE THE BLUETOOTH
78
When the Bluetooth menu is "On" and there is a connection request from the
headset, this message is dispalyed.
Not all headsets support the this feature.(Refer to the user manual of the applicable Bluetooth headset.)
Some headset types may make an attempt at connection when they are
turned on/off even though are not included in the Registered Device list.
1
OK
Do you want to use your headset?
Yes
No
Select Y e s or N o.
! NOTE
LG recommends the following headset models. (Model name : Sony Ericsson(HBH-DS980),
Motorola(S9), Motorola(S605), Jabra(BT620S))
G The stereo/mono headset officially certified to be Bluetooth compatible can be searched and connected.
G The stereo/mono headset that supports the A2DP or HSP function among the Bluetooth devices can be
connected.
G If the surrounding environment of the TV is as follows, the device may not be searched or connected
properly.
-If there is strong electromagnetic wave.
-If there are many Bluetooth devices.
-If the headset is turned off, not in place or has an error.
-Because products such as microwave oven, wireless LAN, plasma light, gas range etc., use the same frequency range, it can cause communication error.
G Only one Bluetooth headset can be connected at once.
G Connection that is lost due to the TV being turned off etc. will not be automatically recovered. Try connecting the applicable device again.
G Some operations can be slower while operating the headset.
G Even if you choose simplink Home Theater after using the headset during Simplink operation, the unit will
not automatically switch to Home Theater speakers.
G When the headset connection continuously fails, pair the device one more time.
G The audio quality of mono headsets will not be as good as that for stereo headsets.
G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different
transmission method compared with stereo headsets.
G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu
returns to the default value and is disabled.
G
MANAGING REGISTERED BLUETOOTH DEVICE
If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used.
An additional device after registration of 12 devices deletes the existing list as stored order.
Bluetooth device names may be up to 14 characters long; the name will be truncated if more characters are used.
BLUETOOTH
Move
BLUETOOTH
OK
Bluetooth
: Off
Bluetooth
TV PIN
: 0000
TV PIN
Move
OK
: Off
Registered Bluetooth Device
: 000000:0d:44:84:14:62
Bluetooth Headset : Disconnected
Bluetooth Headset : Disconnected
Registered Bluetooth
Bluetooth Device
Device
Registered
Registered Bluetooth
Bluetooth Device
Device
Registered
FreePulse_Wireless
My Bluetooth Info.
My Bluetooth Info.
LH L600V
Connect
Delete
TO USE THE BLUETOOTH
1 MENU
Select B L U E T O O T H.
2
OK
Select R e g i s t e r e d B l u e t o o t h D e v i c e.
3
OK
A
Check the registered Bluetooth device.
Connecting the registered Bluetooth headset
1
Select the registered Bluetooth headset you want to connect.
2
BLUE Message asking to connect the selected Bluetooth headset will be displayed.
3
OK
A
Select Y e s or N o.
Deleting registered Bluetooth device
"Delete" will be available when selecting the device
that is not connected to the TV.
1
2
Select the Bluetooth device you want to
remove.
Message asking to delete the selected
RED Bluetooth device will be displayed.
A
Disconnecting registered Bluetooth device
"Disconnect" will be available when selecting the
device that is connected to the TV.
1
2
Select the Bluetooth device that is currently
connected to the TV.
BLUE Disconnect the Bluetooth device.
3
OK
Select Y e s or N o.
79
TO USE THE BLUETOOTH
MY BLUETOOTH INFORMATION
This function provides the My Bluetooth Information to the user.
"Edit" will be available when TV is not connected with any device.
You can edit the My Device Name.
You can check the My Device Address.
BLUETOOTH
Move
OK
BLUETOOTH
Move
Bluetooth
: Off
Bluetooth
: Off
TV PIN
: 0000
TV PIN
: 0000
Bluetooth Headset : Disconnected
Registered Bluetooth Device
My Bluetooth Info.
OK
Bluetooth Headset : Disconnected
My Device Name
Registered Bluetooth Device
4 2 L H 7 0 Y R
My Bluetooth Info.
TO USE THE BLUETOOTH
My Device Address
0 0 : 0 5 : c 9 : f f : 0 0 f : 0 7
Edit
OK
1 MENU
Select B L U E T O O T H.
2
OK
Select M y B l u e t o o t h I n f o ..
3
OK
BLUE
You can use an the alphabet A to Z , the number 0 to
9 , +/ -, and blank.
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
80
RECEIVING PHOTOS FROM EXTERNAL BLUETOOTH DEVICE
For details on how to send photos(only JPEG) from the external Bluetooth device to TV, refer to the user manual
of the applicable device.
Receiving
file(s)
F
1/3
G
E
Close
• When you select C l o s e with the
button, the OSD will disappear.
And when you press the OK button again, it will appear again.
■
(Rotate) : Rotate photos.
Rotates the photo 90° clockwise upon O K button on
(Rotate).
• The maximum accumulated size of the image(s) that can be received is 8MBytes.
• You cannot receive the image(s) while using the Bluetooth headset.
• You cannot receive the image(s) while listening to music from Bluetooth device.
• When the external Bluetooth device is currently sending the photo, press the R E T U R N button to stop
receiving the photo. All photos already received will be deleted as a result.
TO USE THE BLUETOOTH
Select the desired photos.
• With some Bluetooth devices, you may not be able to transmit an image (JPEG) file to the TV set.
• When you send photos via Bluetooth, the memory capacity supports up to 8M and 64 photos.
LISTENING TO THE MUSICS FROM EXTERNAL BLUETOOTH DEVICE
For details on how to listen to the musics from the external Bluetooth device to TV, refer to the user manual of
the applicable device.
You should use the Bluetooth device supporting A2DP(as external device)
• With some Bluetooth devices, you may not be able to listen to music via the TV speaker system.
Back to TV
+ or - button to adjust the volume.
• Press the
• If you wish to switch the sound off, press the MUTE button.
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
G
G
G
You cannot listen to music while using the Bluetooth headset.
You cannot listen to music while receiving image(s).
If you use Bluetooth to listen to music, the Variable/Monitor out(the TV Audio out) does not work.
81
TO USE A USB DEVICE
(Except 19/22/26/32/37/42LH20**, 32/42LF2***, 19/22/26LU5***)
When connecting the USB device
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu is activated or while the Bluetooth
Headset is connected.
In USB device, you can not add a new folder or delete the existing folder.
■ Here shown may be somewhat different from your TV.
1 Connect the USB device to the U S B
I N jack
on the TV.
• This TV Supports on JPEG, MP3 and SD Divx.
When removing the USB device
USB memory stick
2
Select P H O T O L I S T, M U S I C L I S T or
M O V I E L I S T.
Select the USB device menu before removing the
USB device.
1Q. MENU
Select Eject.
2
3
OK
PHOTO LIST
MUSIC LIST
MOVIE LIST
OK
TO USE A USB DEVICE
82
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music files, image files or movie files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with the
Windows operating system. In case of a storage device formatted as a different utility programme which is not
supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may not
be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
G Maximum of 999 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
G Up to 128 English characters can be recognized as a file name.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G TV need more time to detect if the storage size is bigger. If the USB memory is connected in Standby Mode,
power on time would be longer than without memory.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to
make it work properly.
G When using a USB HDD via the USB extension cable, connect a support electric power source.
G
G
PHOTO LIST
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: Max 15360 x 8640
Min : 64x64
• Not support to progressive Jpeg
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
Screen Components
1 MENU
2
Select PHOTO LIST.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
PHOTO LIST
Corresponding buttons on the
remote control
Up Folder
Navigation
No Marked
Up Folder
1366x768, 125KB
1
3
Page 2/3
Drive1
JMJ001
OPTION
TO USE A USB DEVICE
OK
Select U S B.
KY103
12/10/2009
KY101
12/10/2009
KY104
12/10/2009
KY102
12/10/2009
KY105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
MARK
Mark
Exit
4
83
TO USE A USB DEVICE
Photo Selection and PopUp Menu
PHOTO LIST
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
Navigation
OPTION
TO USE A USB DEVICE
PHOTO LIST
Page 2/3
Drive1
KR103
12/10/2009
KR101
12/10/2009
KR104
12/10/2009
KR102
12/10/2009
KR105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
1366x768, 125KB
Up Folder
OPTION
Mark
Exit
No Marked
KR101
Navigation
MARK
Up Folder
JMJ001
1
No Marked
Up Folder
12/10/2009
KR103
12/10/2009
KR104
12/10/2009
1366x768, 125KB
KR102
12/10/2009
JMJ001
12/10/2009
View
Mark All
KR105
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Delete
Close
Page Change
MARK
Mark
Exit
G
View : Display the selected item.
Mark All : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
Select the target folder or drive.
• Use the P
2
3
4
84
Select the desired photos.
OK
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
PHOTO LIST
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
Navigation
OPTION
Page 2/3
Drive1
JMJ001
KR103
12/10/2009
KR101
12/10/2009
KR104
12/10/2009
KR102
12/10/2009
KR105
12/10/2009
JMJ001
12/10/2009
JMJ005
12/10/2009
JMJ002
12/10/2009
JMJ006
12/10/2009
JMJ003
12/10/2009
JMJ007
12/10/2009
JMJ004
12/10/2009
JMJ008
12/10/2009
Page Change
MARK
KR101
12/10/2009
KR102
12/10/2009
JMJ001
12/10/2009
JMJ002
12/10/2009
JMJ003
JMJ004
Up Folder
OPTION
Exit
No Marked
Up Folder
1366x768, 125KB
Mark
TO USE A USB DEVICE
PHOTO LIST
Navigation
No Marked
Up Folder
KR103
12/10/2009
KR104
12/10/2009
1366x768,KR105
125KB
12/10/2009
View
JMJ005
12/10/2009
Mark All
JMJ006
12/10/2009
JMJ007
12/10/2009
JMJ008
12/10/2009
Delete
12/10/2009
Close
12/10/2009
Page Change
MARK
Mark
1/17
Exit
Slideshow
BGM
Delete
Option
Hide
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press the R E T U R N button to move to the previous menu screen.
1
2
3
Select the target folder or drive.
OK
OK
4
5
Select the desired photos.
Show the PopUp menu.
Select V i e w.
OK
The selected photo is displayed in full size.
85
TO USE A USB DEVICE
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e.
• Use
BGM
button to select the previous or
next photo.
1/17
Slideshow
Delete
Option
Hide
• Use
button to select and control the
menu on the full-sized screen.
TO USE A USB DEVICE
G
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. When selected, the selected
photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n.
G
( R o t a t e ) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
G
D e l e t e : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d and M u s i c F o l d e r.
■ Use
button and O K button to set values. Then go to
OK
and press O K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval
between slides.
Slide Speed
Fast
Music Folder
Music
OK
G
86
(Rotate),
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
Cancel
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate : 32k ~ 320kbps
Sampling rate MPEG1 layer 3: 32k ~ 48kHz
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
MUSIC LIST
Select MUSIC LIST.
3
Page 2/3
No Marked
Music
Title
Duration
Up Folder
Corresponding buttons on
the remote control
00:00 / 1:34
1
Up Folder
Navigation
OPTION
Page Change
MARK
Mark
Exit
4
87
TO USE A USB DEVICE
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
MUSIC LIST
Page 2/3
No Marked
Music
Duration
Title
00:00 / 1:34
Up Folder
Navigation
TO USE A USB DEVICE
MUSIC LIST
Page 2/3
Page Change
MARK
Mark
Exit
No Marked
Music
Duration
Title
Up Folder
4395KB, 1Kbps
Play
Play with Photo
Mark All
00:00 / 1:34
Delete
Close
Up Folder
Navigation
1
2
3
4
88
OPTION
OPTION
Page Change
MARK
Mark
Select the target folder or drive.
Select the desired music title.
OK
OK
Show the PopUp menu.
OK
P l a y (During stop) : Play the selected music
titles.
Once a music finished playing, the next selected one will be played. When there are no
selected music titles to play, the next one in
the current folder will be played.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
Up Folder
Select the desired PopUp menu.
Exit
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
■
If you don't press any button for a while during the playing, the play information box (as shown in the below) will
float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
! NOTE
TO USE A USB DEVICE
When music is playing,
is displayed in back of the music title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G This TV can not play music files less than 32 Kbytes.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
89
TO USE A USB DEVICE
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
Supports up to four drives.
TO USE A USB DEVICE
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1 , MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.xx , DivX 4.xx,
DivX 5.xx , DivX VOD ( DRM ), XviD, Divx 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital, AC3
Sampling frequency : 32k ~ 48kHz
Bit rate : 32k ~ 320kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Max bitrate of playable DivX file is 6Mbps.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30 FPS
(720*480) depending on Resolution.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• Files of 25 FPS or 30 FPS of higher may not be played properly.
• If the file is recorded with GMC, the unit supports only 1 point of recorded level.
(GMC is the acronym for Global Motion Compensation, a technique used to compensate MPEG Video files.)
• A video file name and its subtitle file name must be identical for it to be displayed.
• A DivX movie file and its subtitle file must be located in the same folder.
• Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly for some files while playing a movie.)
• Playing a video via a USB connection that does not support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
File
Extension name
mpg, mpeg, mpe, vob, dat
Avi, divx, m4v
90
Video Decodec
Audio Codec
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
MPEG 4-SP, MPEG4-ASP, Divx 3.xx,Divx 4.xx,
Divx 5.xx, Divx 6.xx(Playback), Xvid
AC3,MPEG,MP3,PCM
Resolution
720x576@25p
720x480@30p
Screen Components
1 MENU
2
OK
Select U S B.
Select MOVIE LIST.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked
movies
4
MOVIE LIST
3
Page 2/3
Movie
SJS001
No Marked
Title
Duration
Up Folder
Corresponding buttons on
the remote control
KR1
KR2
1366x768, 125KB
1
Up Folder
Navigation
SJS001
00:00:00
SJS002
00:00:00
SJS003
00:00:00
OPTION
Page Change
MARK
Mark
Exit
4
TO USE A USB DEVICE
Movie Selection and PopUp Menu
As shown, up to 6 movie titles are listed per page.
MOVIE LIST
Page 2/3
No Marked
Movie
Duration
Title
SJS001
Up Folder
KR1
KR2
1366x768, 125KB
Up Folder
Navigation
SJS001
00:00:00
SJS002
00:00:00
OPTION
MOVIE LIST
Page 2/3
Page Change
Exit
Duration
Title
1366x768, 125KB
Up Folder
1366x768, 125KB
OPTION
KR2
Play
SJS001
Mark All
Delete
SJS002
00:00:00
00:00:00
Close
00:00:00
SJS003
Page Change
MARK
Mark
Exit
3
1
2
Mark
Up Folder
KR1
Navigation
MARK
No Marked
Movie
SJS001
P l a y : Play the selected movie titles. Divx Play
is executed while screen changes.
G P l a y M a r k e d : Play the selected movie titles.
Once a music finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing movie titles.
G M a r k A l l : Mark all movie titles in the folder.
G U n m a r k A l l : Deselect all marked movie titles.
G D e l e t e : Delete the selected movie titles.
G C l o s e : Close the pop-up menu.
G
00:00:00
SJS003
Select the target folder or drive.
4
OK
Select the desired movie.
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
• In the case of files not supported, amessage
regarding non-supported file is displayed.
91
TO USE A USB DEVICE
DivX Audio Language & Subtitle Language
Picture Size
F
Full Screen
Subtitle Language
---
Audio Language
1/1
Subtitle File
---
. Language
Latin 1
. Sync
0
. Position
---
G
language
OK
TO USE A USB DEVICE
1
Select the desired option.
2
Latin1
French, Spanish, Catalan Basque, portuguese, Italian, Albanian,
Rhaeto-Romanic, Dutch, German, Danish, Swedish, Norwegian,
Finnish, Faroese, Icelandic, Irish, Scottish, English
Latin2
Czech, Hungarian, Ploish, Romanian, Croatian, Slovak,
Slovenian, Sorvian
Latin4
Estonian, the Baltic languages Latvian(Lettish) and Lithuanian,
Greenlandic and Lappish
Latin5
English, Trukish
Cyrillic
Bulgarian, Byelorussian, Macedonian, Russian, Serbian and
pre-1990 (no ghe with upturn) Ukrainian
Greek
English, modern Greek
Hebrew
English, modern Hebrew
Chinese
Chinese
Thai
Thai
Arabic
English, Arabic
• When DivX is playing, if you press the
R E D button, this message is displayed.
Select P i c t u r e S i z e , S u b t i t l e
Language, Audio Language,
S u b t i t l e F i l e , L a n g u a g e , S y n c or
P o s i t i o n.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG
-> GGGGGG.
■
II
Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the P a u s e ( I I) button.
Still screen is displayed.
■
■
P L A Y ( G)
92
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y( G) button to return to normal playback.
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or
purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivX Reg.
Reg. Code
Code
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Deactivation
Move
OK
DivX(R) Video On Demand
Your registration code is : XXXXXXXXXX
To learn more visit www.divx.com/vod
Close
1 MENU
Select U S B.
OK
Select D i v X R e g . C o d e.
• Press the M E N U button to return to normal TV viewing.
3
OK
Display D i v X R e g . C o d e.
• Press the R E T U R N button to move to the previous menu screen.
Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.
TO USE A USB DEVICE
2
“DivX Certified to play DivX video, including premium content”
ABOUT DIVX VIDEO : DivX® is a digital video format created by DixX,Inc. This is an
official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified® device must be registered
in order to play DivX Video-on-Demand[VOD] content. To generate the registration
code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with
this code to complete the registration process and learn more about DivX VOD.
! NOTE
Supported movie file
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
G Video
Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx,
DivX5.xx, DivX VOD(DRM), XviD.
G When loading, some buttons may not work.
G If you use the DivX registration code of another device, the rented or purchased DivX file cannot be
played. Therefore always use the DivX registration code assigned to this product.
93
TO USE A USB DEVICE
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
OK
USB
Move
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Deactivation
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
No
OK
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code : XXXXXXXX
TO learn more visit www.divx.com/vod.
Close
TO USE A USB DEVICE
1 MENU
Select U S B.
2
OK
Select D e a c t i v a t i o n.
OK
Select Y e s.
3
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
94
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 1 6 : 9, J u s t S c a n,
O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m and C i n e m a Z o o m .
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
1Q. MENU
Select A s p e c t R a t i o.
2
• You can also adjust A s p e c t R a t i o in the P I C -
T U R E menu.
• For Zoom Setting, select 1 4 : 9, Z o o m and
Select the desired picture format.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
C i n e m a Z o o m in Q.Menu or select C i n e m a
Z o o m in PICTURE menu.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture,
You can see the noise at the edge.
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, black bars will appear
on both the left and right of the screen.
Just Scan
95
PICTURE CONTROL
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
• Cinema Zoom
Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended
and vertically cropped. The picture adopting a
compromise between alteration and screen
coverage.
The adjustment range is 1-16.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE CONTROL
! NOTE
G
G
G
96
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m , C i n e m a Z o o m in Component, HDMI
mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB mode only.
In HDMI/Component (over 720p) mode, J u s t S c a n is available.
ENERGY SAVING
It reduces the TV’s power consumption by adjusting backlight level.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level
to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture
Mode.
PICTURE
Move
OK
PICTURE
Move
Aspect Ratio : 16:9
Energy
Saving : :Off
Off
Energy
Saving
Aspect Ratio : 16:9
Picture Mode : Vivid
Picture Mode : Vivid
Energy
Saving
Energy
Saving
: Off
• Backlight
100
• Backlight
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
E
E
OK
100
Auto
100
Off
Off
50
Minimum
70
Medium
70
Maximum
Screen Off
(Except 19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***,
19/22/26LU5***)
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select
3
E n e r g y S a v i n g.
Select A u t o(Except 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***,
19/22/26LU5***),, O f f, M i n i m u m, M e d i u m, M a x i m u m or S c r e e n O f f.
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• When selecting Screen Off, the screen will be turned off after 3 seconds. In this case, if you want turn the
screen on, press any key on the set or the remote control or play the USB or Bluetooth device.
• If you adjust “EE n e r g y S a v i n g - A u t o(Except 19/22/26/32/37/42LH2***, 32/42LF2***,
32/37/42/47LH3***, 19/22/26LU5***), M i n i m u m, M e d i u m, M a x i m u m”, B a c k l i g h t feature will not work.
• You can also adjust E n e r g y S a v i n g button.
97
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
I n t e l l i g e n t S e n s o r Adjusts picture according to the surrounding conditions.
Vivid
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
Standard
The most general and natural screen display status.
Natural
The most natural screen display status.
Cinema
Optimizes video for watching movies.
Sport
Optimizes video for watching sports events.
(Except 19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***,
Game
Optimizes video for playing games.
19/22/26LU5***)
PICTURE
Move
PICTURE
OK
Move
OK
Aspect Ratio : 16:9
Aspect Ratio : 16:9
Energy Saving
Energy Saving
: Off
: Off
Picture Mode : Standard
Vivid
Picture Mode : Standard
Vivid
• Backlight
100
• Backlight
• Contrast
100
• Contrast
Intelligent Sensor
Vivid
Vivid
100
Standard
100
Natural
PICTURE CONTROL
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
50
Cinema
70
Sport
• Colour
70
• Colour
70
Game
E
E
Expert1
Expert2
1 MENU
Select P I C T U R E.
• P i c t u r e M o d e adjusts the TV for the best pic-
2
OK
3
OK
Select P i c t u r e M o d e.
Select I n t e l l i g e n t S e n s o r(Except
19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***,
19/22/26LU5***), V i v i d, S t a n d a r d,
N a t u r a l, C i n e m a, S p o r t or G a m e.
ture appearance. Select the preset value in the
P i c t u r e M o d e menu based on the programme
category.
• When the Intelligent sensor function is on, the
most suitable picture is automatically adjusted
according to the surrounding conditions.
• You can also adjust P i c t u r e M o d e in the Q .
M e n u.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
98
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
• Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
• Contrast
Adjusts the difference between light and dark levels in the picture. You may use Contrast when the bright part
of the picture is saturated.
• Brightness
Increases or decreases the amount of white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
• Colour
Adjusts intensity of all colours.
• Tint
Adjusts the balance between red and green levels.
It is not available to use this function in “II n t e l l i g e n t S e n s o r”.
PICTURE
Move
PICTURE
OK
Energy Saving
: Off
: Off
Picture Mode : Standard
Vivid
• Backlight
100
• Backlight
• Contrast
100
• Contrast
Standard
Natural
100
Cinema
100
Sport
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
50
Game
70
Expert1
• Colour
70
• Colour
70
Expert2
E
E
1 MENU
OK
Vivid
Vivid
• Benefits of using Backlight
- The electricity consumption is reduced by up to 60%.
- The black brightness is reduced. (As the black has
greater depth, you can enjoy a better quality definition.)
- You can adjust brightness with maintaining original
signal resolution.
Select P I C T U R E.
2
Select P i c t u r e M o d e.
PICTURE CONTROL
Energy Saving
Picture Mode : Standard
Vivid
OK
Move
Intelligent Sensor
Aspect Ratio : 16:9
Aspect Ratio : 16:9
3
OK
Select V i v i d, S t a n d a r d, N a t u r a l,
C i n e m a, S p o r t or G a m e.
OK
Select B a c k l i g h t, C o n t r a s t, B r i g h t n e s s,
S h a r p n e s s, C o l o u r or T i n t.
OK
Make appropriate adjustments.
4
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
99
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
you can set the video value differently for each input.
To reset to the factory default screen after making adjustment to each video mode, execute the “Reset” function
for each Picture Mode.
■
Here shown may be somewhat different from your TV.
PICTURE
Move
PICTURE
OK
Move
E
70
• Colour
70
• ColourNoise Reduction
70
• Contrast
OK
E
• Sharpness
Colour Temperature
• Contrast
100
Dynamic Contrast
• Brightness
50
Dynamic Colour
• Sharpness
70
100
• Brightness
50
• Tint
R
• Tint
G
Gamma
R
• Advanced Control
• Advanced
BlackControl
Level
• Picture Reset
• Picture Reset
Eye Care
Screen
Screen
F
Cool
G
High
High
Medium
G
Medium
Auto
Off
Film Mode
Off
Real Cinima
Off
TruMotion
High
E
Only 19/22/26/32/37/42LH2***, 32/42LF2***,
32/37/42/47LH3***, 19/22/26LU5***
Close
PICTURE CONTROL
Except 19/22/26/32/37/42LH2***, 32/42LF2***,
32/37/42/47LH3***, 19/22/26LU5***
1 MENU
Select P I C T U R E.
2
OK
3
OK
4
Select A d v a n c e d C o n t r o l.
Select C o l o u r T e m p e r a t u r e, D y n a m i c C o n t r a s t, D y n a m i c C o l o u r, N o i s e R e d u c t i o n,
G a m m a, B l a c k L e v e l, E y e C a r e, F i l m M o d e(Only 19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***, 19/22/26LU5***), R e a l C i n e m a(Except
19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***, 19/22/26LU5***),
T r u M o t i o n(Except 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***,
19/22/26LU5***), C o l o u r G a m u t, E d g e E n h a n c e r or O P C . (Refer to p.102~103)
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
100
EXPERT PICTURE CONTROL
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
As the detail item for video quality experts to adjust the video precisely using specific videos, this may not be
effective for general videos.
Move
OK
PICTURE
Energy Saving
: Off
Picture Mode
Mode :: Vivid
Expert1
Picture
Expert1
Expert1
Expert2
F
Noise Reduction
• Brightness
50
Gamma
• H Sharpness 70
• V Sharpness 70Black Level
Aspect Ratio : 16:9
• Backlight
100
Vivid
• Contrast
100
Standard
• Brightness
50
Cinema
• H Sharpness 70
Sport
• V Sharpness 70
E Game
Dynamic Contrast
Move
OK
E
PICTURE
• Colour
Expert Control
Control
•• Expert
• Picture Reset
Screen
G
Low
Auto
70Film Mode
• Tint
Off
Low
Off
Real Cinema
Off
TruMotion
High
Colour Standard
SD
Colour Gamut
Standard
Edge Enhancer
High
E
Close
1 MENU
Select P I C T U R E.
2
OK
PICTURE CONTROL
Except 19/22/26/32/37/42LH2***,
32/42LF2***, 32/37/42/47LH3***,
19/22/26LU5***
Select P i c t u r e M o d e.
3
OK
Select E x p e r t 1 or E x p e r t 2.
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
4
5
6
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
101
PICTURE CONTROL
*This feature is not available for all models.
Colour Temperature
(Warm/Medium/Cool)
■
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colours so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look more
vivid.
Noise Reduction
(Off/Low/Medium/High)
■
Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
■
You can adjust brightness of dark area and middle gray level area of the picture.
• L o w : Make dark and middle gray level area of the picture brighter.
• M e d i u m: Express original picture levels.
• H i g h: Make dark and middle gray level area of the picture darker.
Dynamic Contrast
(Off/Low/Medium/High)
Dynamic Colour
(Off/Low/High )
Black Level
(Low/High)
• L o w : The picture of the screen gets darker.
• H i g h : The picture of the screen gets brighter.
• A u t o : Realizing the black level of the screen and set it to High or Low automatically.
■
■
PICTURE CONTROL
Eye Care
(On/Off)
Real Cinema/Film Mode
(On/Off)
TruMotion
(Off/Low/High )
102
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
*This feature is not available for all models.
■ Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.
■ This feature is disable in “P
P i c t u r e M o d e-V
V i v i d, C i n e m a, I n t e l l i g e n t S e n s o r ”.
■
■
■
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
This function can work when TruMotion is off.
*This feature is not available for all models.
• H i g h : Provides smoother picture movement.
• L o w : Provides smooth picture movement. Use this setting for standard use.
• O f f : Use this setting when "High" and "Low" setting result in noise.
■ TruMotion 100Hz can reduce perception of blur on fast moving scenes by displaying one hundred images per second. (Only 32LH6***, 32/37/42/47LH7***,
42/47SL9***)
■ TruMotion 200Hz displays 200 scenes per second by combining advanced
100Hz technology with scanning backlight. This technology is verified from
intertek & TüV Rheinland.(Only 37/42/47/55LH5***, 42LH6***,
32/42/47/55SL8***, 42/47LH9***)
■ It is used for the best picture quality without any motion blur or judder when
you enter a quick image or Film Source.
■ This feature is disable in RGB-PC mode.
■ If you enable "TruMotion 100Hz or TruMotion 200Hz", noise may appear on the
screen. If this occurs, set "TruMotion 100Hz or TruMotion 200Hz" to "Off".
• S t a n d a r d : Mode to reproduce original colour according to the standard of
Colour Gamut
(Wide/Standard)
input signal independent of the display characteristics.
• W i d e : Mode to use and set the rich colour area of the display.
■ Maximize the utilization for colour area that can be expressed.
■
Edge Enhancer
(Off/Low/High)
*This feature is not available for all models.
■ As the technology to reduce the power consumption while keeping the same
brightness, this has the effect of reducing power consumption, improvement in
contrast.
OPC
(On/Off)
Colour Standard
(SD/HD)
Shows clearer and distinctive yet natural corners of the video.
■
■
■
Colour Filter
(Off/Red/Green/Blue)
■
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
This feature is enabled in “Picture Mode - Expert1/2”.
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
This feature is enabled in “Picture Mode - Expert1/2”.
Colour Management
System
PICTURE CONTROL
This is the function to adjust the overall colour of the screen to the feeling you want.
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 ~ +50.
■ This feature is enabled in “Picture Mode - Expert1/2”.
■
White Balance
(Medium/Warm/Cool)
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range
is -30 ~ +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 ~ +30.
■ This feature is disable in RGB-PC mode.
■ This feature is enabled in “Picture Mode - Expert1/2”.
■
103
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
E
100
• Contrast
100
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
70
• Tint
i
R
R
RG
G
• Advanced Control
• Picture Reset
Screen
• Colour
70
Resetting
video configuration...
• Tint
G
• Advanced Control
PICTURE CONTROL
1 MENU
OK
E
• Contrast
Move
• Picture Reset
Screen
Select P I C T U R E.
2
OK
Select P i c t u r e R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
104
LED LOCAL DIMMING(Only 42/47LH9***)
Use this feature to see the difference LED Local Dimming makes.
PICTURE
Move
PICTURE
OK
Move
E
E
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
60
• Colour
60
• Tint
0
R
G
• Tint
• Advanced Control
1 MENU
0
R
G
• Advanced Control
• Picture Reset
• Picture Reset
Screen
Screen
LED
LED Local
Local Dimming
Dimming
OK
Off
: :Off
LED
LED Local
Local Dimming
Dimming
Off
Off
: :Off
On
On
PICTURE CONTROL
Select P I C T U R E.
2
OK
Select L E D L o c a l D i m m i n g.
OK
Select O n or O f f.
3
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
105
PICTURE CONTROL
POWER INDICATOR
It helps you adjust the brightness of moving LED and sound when power is turned on.
S t a r t u p S o u n d(Only 32/37/42/47LH7***)
Determines whether to set the start up sound to O f f, L o w , M i d d l e or H i g h when the power turns on.
Standby Light
Determines whether to set the indicator light on the front of the TV to O f f, L o w or H i g h in standby mode.
(Only 32/37/42/47LH7***)
Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode.
(Except 32/37/42/47LH7***)
Power Light
Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on.
In case of 42LH60 model, indicator light of side and front is on/off controlled at once.
OPTION
Move
OK
OPTION
Move
OK
E
E
Input Label
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
PICTURE CONTROL
Power Indicator
:1
Power Indicator
Indicator
Power
Startup Sound
Demo Mode
: Off
Power Indicator
Mode Setting
: Home Use
Demo Mode
Power Light
: Off
Mode Setting
: Home Use
Factory Reset
F
Standby Light
Middle
G
Off
On
Close
Only 32/37/42/47LH7***
1 MENU
Select O P T I O N.
2
OK
Select P o w e r I n d i c a t o r.
3
OK
Select S t a r t u p S o u n d(Only 32/37/42/47LH7***), S t a n d b y L i g h t or
P o w e r L i g h t.
4
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
106
DEMO MODE
Display the slide show to explain the various logo of this TV.
It is not possible to use D e m o M o d e in H o m e U s e mode.
In S t o r e D e m o, D e m o M o d e is automatically set to O n.
Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
OK
E
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Demo
DemoMode
Mode
Off
:: Off
Demo
DemoMode
Mode
Off
::Off
Off
Mode Setting
: Home Use
Mode Setting
: On
Home Use
On
Power Indicator
: On
Power Indicator
Factory Reset
Factory Reset
PICTURE CONTROL
1 MENU
Move
E
Input Label
Select OPTION.
2
OK
Select Demo Mode.
OK
Select O n to show the various logo of TV.
3
4
OK
Return to TV viewing.
If you want to stop the demo, press any button.
+ , - button)
(except MUTE,
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
107
PICTURE CONTROL
MODE SETTING
H o m e U s e ” mode for the best picture in your home environment.
We recommend setting the TV to “H
S t o r e D e m o” mode is an optimal setting for displaying at stores.
“S
OPTION
Move
OK
E
SIMPLINK
: On
Key Lock
: Off
Set ID
:1
Power Indicator
Demo Mode
Mode Setting
Setting
Mode
Selecting the environment.
Choose the setting mode you want.
Selecting the environment.
Choose the setting mode you want.
Input Label
Home Use
Store Demo
Select [Store Demo] to use this TV in store. To use
this TV at home Select [Home Use]
or
Store Demo
Home Use
Select [Home Use] to use this TV at Home. To use
this TV at store, select [Store Demo]
Off
: :Home
HomeUse
Use
Factory Reset
PICTURE CONTROL
1 MENU
Select O P T I O N.
2
Select M o d e S e t t i n g.
OK
3
Select S t o r e D e m o or H o m e U s e .
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
108
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time
the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments
for each programme.
AUDIO
Move
On
:: Off
AutoVolume
Volume
Auto
On
:: Off
Clear Voice ll
: Off
Clear Voice ll
: Off
• Level
Sound Mode
0
-
+
0
L
R
: Standard
OK
Off
On
On
0
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Select A U D I O.
SOUND & LANGUAGE CONTROL
OK
• Level
Balance
Sound Mode
E
2
Move
AutoVolume
Volume
Auto
Balance
1 MENU
AUDIO
OK
Select A u t o V o l u m e.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
109
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust
the frequency of the equalizer.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume
Clear Voice ll
AUDIO
Balance
-
+
0
L
R
: Standard
Standard
: Off
• Level
Balance
Sound
Sound Mode
Mode
0
-
0
L
: Standard
Standard
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
+
R
Standard
Standard
Music
• SRS TruSurround XT : Off
SOUND & LANGUAGE CONTROL
Select A U D I O.
OK
: Off
Clear Voice ll
0
E
1 MENU
Move
Auto Volume
: Off
• Level
Sound
Sound Mode
Mode
OK
: Off
Cinema
Sport
Game
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
3
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
110
SOUND SETTING ADJUSTMENT -USER MODE
Move
Clear Voice ll
Balance
-
+
0
L
R
Balance
Sound Mode
50
• Bass
50
OK
Select A U D I O.
4
Select S o u n d M o d e.
5
OK
3
OK
-
+
L
R
: Standard • SRS TruSurround XT
• SRS TruSurround XT : Off
50
Treble • Treble
50
••Treble
50
• Bass50
50
• Bass
E
E
2
0
0
Off
E
• Treble
: Off
• Level
Standard (User)
: Standard
OK
: Off
Clear Voice ll
0
• SRS TruSurround XT : Off
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
Mode
Sound
AUDIO
OK
: Off
Select S t a n d a r d , M u s i c , C i n e m a ,
S p o r t or G a m e.
6
OK
E
AUDIO
Auto Volume
Close
Select T r e b l e, B a s s.
Make appropriate adjustments.
OK
• Press the R E T U R N button to move to the previous menu screen.
SRS TRUSURROUND XT(Except 32/42LH6***)
Select this option to sound realistic.
1 MENU
2
Select A U D I O.
OK
Select S R S T r u S u r r o u n d X T.
OK
Select O n or O f f.
• S R S T r u S u r r o u n d X T : TruSurround XT is a
patented SRS technology that solves the problem of playing 5.1 multichannel content over
two speakers.
SOUND & LANGUAGE CONTROL
• Press the M E N U button to return to normal TV viewing.
3
4
OK
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
111
SOUND & LANGUAGE CONTROL
ULTRA SOUND(Only 32/42LH6***)
Ultra Sound 3.1Channel
- Sound plays through TV speaker after converting 2 Channel(Left/Right) to 3.1
Channel(Left/Right/Center/Subwoofer) signal.
Ultra Sound 5.1Channel
- Sound plays through TV speaker after converting 2 Channel(Left/Right) to 5.1
Channel(Left/Right/Center/Rear Left/Rear Right/Subwoofer) signal.
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
: Off
Clear Voice ll
: Off
Clear Voice ll
: Off
• Level
Sound Mode
0
-
+
0
L
R
Sound Mode
Standard
UltraSound
Sound
••Ultra
3.1Ch
3.1Ch
0
-
+
0 L
R
• Ultra Sound
Standard
50
UltraSound
Sound• Treble3.1Ch
3.1Ch
••Ultra
• Treble
50
• Treble
• Bass
50
• Bass
E
SOUND & LANGUAGE CONTROL
2
• Level
Balance
OK
• Bass
50
50
E
E
Balance
1 MENU
Move
3.1Ch
E
AUDIO
50
Close
Select A U D I O.
OK
Select U l t r a S o u n d.
OK
Select 3 . 1 C h or 5 . 1 C h.
3
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
112
CLEAR VOICE ll
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Auto Volume
Clear Voice ll
Balance
Move
Auto Volume
: Off
• Level
Sound Mode
AUDIO
OK
: Off
Clear Voice ll
0
-
+
0
L
R
: Standard
: Off
• Level
0
Off
Off
-
L
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Select A U D I O.
+
On
R
: Standard
E
1 MENU
0
Balance
Sound Mode
OK
: Off
E
O n” for C l e a r V o i c e I I, S R S
• If you select “O
T r u S u r r o u n d X T or U l t r a S o u n d features
will not work.
2
OK
Select C l e a r V o i c e I I.
OK
Select O n or O f f.
3
4
OK
Select L e v e l.
OK
Make appropriate adjustments.
• Select levels from ‘-6’ to ’+6’.
5
SOUND & LANGUAGE CONTROL
Adjustment for Clear Voice Level With selecting On
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
113
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
: Off
Clear Voice ll
: Off
• Level
Balance
Sound Mode
AUDIO
OK
-
+
0
L
R
: Off
• Level
0
Balance
Sound Mode
: Standard
OK
: Off
Clear Voice ll
0
-
0 L
• Balance
+
0 F RL
R
G
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Move
Auto Volume
Close
E
Select A U D I O.
2
SOUND & LANGUAGE CONTROL
OK
Select B a l a n c e.
OK
Make desired adjustment.
3
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
114
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In A V, C O M P O N E N T, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even when
there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
Move
E
Balance
Sound Mode
0
L
: Standard
AUDIO
OK
R
Balance
Sound Mode
OK
R
: Standard
• SRS TruSurround XT : Off
50
• Treble
50
• Bass
50
• Bass
50
• Reset
: Monitor Out
Audio Out
TV Speaker
Speaker
TV
Off
: On
TV Speaker
Speaker
TV
Off
: Monitor
Out
On
On
: On
Off
SOUND & LANGUAGE CONTROL
OK
L
• Treble
Audio Out
2
0
• SRS TruSurround XT : Off
• Reset
1 MENU
Move
E
AUDIO
Select A U D I O.
Select T V S p e a k e r.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output
the TV speaker.
115
SOUND & LANGUAGE CONTROL
SELECTING AUDIO OUT
Select M o n i t o r O u t or V a r i a b l e o u t to connect the audio outputs.
Monitor Out
It sounds connected to AV eqiupment input including exterior amp.
The level of the sound is always regular, regardless of the volume setup of the set. Thus the level of the sound from
an exterior equpment can be controled by adjusting the volume of the exterior equipment.
Variable out
It sounds connected to AV eqiupment input including exterior amp.
Sound can be adjusted depending on the volume setup of the set. Thus the level of the sound from the exterior
equipment can be controled either by the exterior equipment or the volume setup of the set.
Move
E
Balance
Sound Mode
0
L
AUDIO
OK
Balance
R
: Standard
Sound Mode
SOUND & LANGUAGE CONTROL
2
OK
0
OK
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
1 MENU
Move
E
AUDIO
• Reset
Audio Out
Out
Audio
: Monitor Out
Audio Out
Out
Audio
TV Speaker
: On
TV Speaker
Monitor
Monitor
Out
: Monitor
Out Out
Variable Out
: On
Select A U D I O.
Select A u d i o O u t.
3
OK
Select M o n i t o r O u t or V a r i a b l e o u t .
4
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
116
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
Move
E
Sound Mode
0
L
: Standard
AUDIO
OK
R
Move
E
AUDIO
Balance
Balance
Sound Mode
• SRS TruSurround XT : Off
• Treble
50
• Treble
• Bass
50
i
OK
R
50
Resetting
• Bass sound mode
50 configuration...
• Reset
Audio Out
: Monitor Out
Audio Out
: Monitor Out
TV Speaker
: On
TV Speaker
: On
Select A U D I O.
SOUND & LANGUAGE CONTROL
2
L
: Standard
• SRS TruSurround XT : Off
• Reset
1 MENU
0
OK
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
117
SOUND & LANGUAGE CONTROL
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1Q. MENU
Select A u d i o.
2
SOUND & LANGUAGE CONTROL
118
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
2
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or F M M O N O.
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
SOUND & LANGUAGE CONTROL
Speaker Sound Output Selection
119
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE SELECTION
The installation setup menu appears on the TV screen when it is switched on for the first time.
1
OK
Select your desired language.
* If you want to change Language selection
1
MENU
Select O P T I O N.
2
Select M e n u L a n g u a g e.
OK
SOUND & LANGUAGE CONTROL
3
Select your desired language.
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
120
If you do not finish the set-up I n s t a l l a t i o n S e t u p by pressing R E T U R N or if you time out on the
OSD (On Screen Display) the installation menu will continuously appear until the set up is completed
whenever the TV is switched on.
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset the clock.
TIME
Move
TIME
OK
Clock
Clock
1 MENU
2
OK
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Hour
F
Minute
10
G
09
Close
Select T I M E.
Select C l o c k.
OK
Select either the Hour or Minute option.
Set the Hour or Minute options.
TIME SETTING
4
Off Time
OK
3
Move
Clock
Clock
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
121
TIME SETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
Clock
11 : 23
Clock
F
Off Time
: Off
Off Time
: Off
On Time
Time
On
Off
:: Off
On Time
Time
On
Off
:: Off
Sleep Timer
: Off
Sleep Timer
: Off
Off
Hour
00
Minute
00
Programme
1
Volume
30
G
Close
1 MENU
When the O n T i m e is selected,
Select T I M E.
3
Select H o u r, M i n u t e,
P r o g r a m m e or V o l u m e.
OK
2
OK
Select O f f T i m e or O n T i m e.
4
Set the Hour, Minute, Programme, Volume.
TIME SETTING
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
2
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
122
TELETEXT
This feature is not available in all countries.
RATIO
TV/RAD
SLEEP
Teletext is a free service broadcast by most TV
stations which gives up-to-the-minute information on news, weather, television programmes,
share prices and many other topics.
AV
MODE
INPUT
1
2
3
4
5
6
7
8
9
POWER
ENERGY SAVING
AV
V MODE
RATIO
POWER
AV MODE
The teletext decoder of this TV can support the
SIMPLE, TOP and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of pages
which are selected by directly entering the corresponding page number. TOP and FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
SWITCH ON/OFF
LIST
ENERGY SAVING
TV
AV
V MODE
A
0
POWER
Q.VIEW
AV
V MODE
TV
FAV
P
MUTE
MENU
RATIO
ON/OFF
ENERGY SAVING
SAVING
Q.VIEW
LIST
MARK/
Q.MENU
Q.VIEW
MUTE
ENERGY SAVINGAV MODE
SLEEP
POWER
ENERGY SAVING
LIST
POWER
POWER
RATIO
RA
ENERGY SA
SAVING
VING
TV
AV MODE
RATIO
SLEEP
POWER
RATIO
RA
TIO
ON/OFF
P
A
G
E
MUTE
AV
V MODE
Q.VIEW
LIST
MUTE
MARK
MARK
FAV
FAV
Q.VIEW
LIST
OK
MUTE
MARK
FAV
RETURN
MENU
RETURN
FAV
Q.MENU
MARK
Press the T E X T button to switch to teletext. The
initial page or last page viewed appears on the
screen.
Two page numbers, TV station name, date and time
are displayed on the screen headline. The first page
number indicates your selection, while the second
shows the current page displayed.
Press the T E X T button to switch off teletext. The
previous mode reappears.
SIMPLE TEXT
Page selection
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TOP TEXT
TELETEXT
A
1
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
2
3
4
A
Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
123
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured
buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the
NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
i
A Index
Select the each index page.
Text Option
Index
Time
A Time
TELETEXT
When viewing a TV programme, press this button to display the time at the top right hand
corner of the screen. Press this button again to remove the display. In the teletext mode,
press this button to select a sub page number. The sub page number is displayed at the
or
bottom of the screen. To hold or change the sub page, press the RED/GREEN, P /
NUMBER buttons.
Press again to exit this function.
Hold
Reveal
Update
Close
A Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive. To continue press this button again.
?
A Reveal
Press this button to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
A Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Press
this button again to view the updated teletext page.
124
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A
The remote control
does not work
Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A The TV goes into Standby mode automatically if no signal is received or no
operation is performed for 15 minutes.
A
Power is suddenly
turned off
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A
No picture & No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
A
Check for local interference such as an electrical appliance or power tool.
APPENDIX
Horizontal/vertical bars
or picture shaking
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display
can result. Please use the latest cables that support at least HDMI version 1.3.
125
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside the TV
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when
connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
APPENDIX
Screen colour is unstable
or single colour
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
There is a problem with PICTURE settings.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
126
A
A
It means that the TV is currently set to S t o r e D e m o mode.
To switch to H o m e u s e mode you should do the followings:
From the TV Menu, choose O P T I O N -> Choose M o d e S e t t i n g -> Choose
H o m e u s e.
Now, you have completed switching to the H o m e u s e mode.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
A
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Do not to use a wet cloth.
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
127
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
26LH2***
32LH2***
19LH20R-TA/LA
22LH20R-TA/LA
26LH20R-TA/LA
32LH20R-TA/LA
32LH23UR-TA/LA
462.4 x 353.0 x 171.0 mm
18.2 x 13.9 x 6.8 inches
533.4 x 397.0 x 171.0 mm 667.0 x 504.0 x 224.0 mm 805.0 x 583.0 x 224.0 mm
26.3 x 19.9 x 8.8 inches
21.0 x 15.7 x 6.8 inches
31.7 x 23.0 x 8.8 inches
462.4 x 308.0 x 65.0 mm
18.2 x 12.2 x 2.6 inches
533.4 x 351.7 x 65.0 mm
21.0 x 13.9 x 2.6 inches
667.0 x 446.2 x 80.0 mm
26.3 x 17.6 x 3.2 inches
805.0 x 528.0 x 79.9mm
31.7 x 20.8 x 3.2 inches
3.8 kg / 8.4 lbs
3.6 kg / 8.0 lbs
4.8 kg / 10.6 lbs
4.6 kg / 10.2 lbs
8.9 kg / 19.7 lbs
7.8 kg / 17.2 lbs
11.5 kg / 25.4 lbs
10.3 kg / 22.7 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
37LH2***
42LH2***
32LF2***
42LF2***
37LH20R-TA/LA
37LH23UR-TA/LA
42LH20R-TA/LA
42LH23UR-TA/LA
32LF20FR-TA/LA
42LF20FR-TA/LA
922.0 x 659.0x 297.0mm
36.3x 26.0 x 11.7 inches
1028.0 x 715.4 x 297.0mm
40.5x 28.2 x 11.7 inches
801.8 x 604.2 x 227.3 mm
31.5 x 23.7 x 8.9 inches
1032.8 x 742.3 x 293.8 mm
40.6 x 29.2 x 11.5 inches
without stand
922.0 x 595x 88.0mm
36.3x 23.4 x 3.5 inches
1028.0 x 655.0x 88.7mm
40.5 x 25.8 x 3.5 inches
801.8 x 544.1 x 79.0 mm
31.5 x 21.4 x 3.1 inches
1032.8 x 670.1 x 92.0 mm
40.6 x 26.3 x 3.6 inches
14.8 kg / 32.6 lbs
13.0 kg / 28.7 lbs
18.0 kg / 39.7 lbs
16.2 kg / 35.7 lbs
13.4 kg / 29.5 lbs
11.9 kg / 26.2 lbs
23.6 kg / 52.0 lbs
21.0 kg / 46.2 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
with stand
without stand
Power requirement
MODELS
Dimensions
22LH2***
with stand
(Width x Height x Depth)
Weight
19LH2***
with stand
32LH2***
37LH2***
42LH2***
32LH22R-TB/LB
37LH22R-TB/LB
42LH22R-TB/LB
805.0 x 586.0 x 211.0 mm
31.7 x 23.0 x 8.3 inches
922.0 x 660.0x 270.6mm
36.3x 26.0 x 10.7 inches
1028.0 x 716.4 x 270.6mm
40.5x 28.2 x 10,7 inches
805.0 x 528.0 x 79.9mm
31.7 x 20.8 x 3.2 inches
922.0 x 595x 88.0mm
36.3x 23.4 x 3.5 inches
1028.0 x 655.0x 88.7mm
40.5 x 25.8 x 3.5 inches
11.5 kg / 25.4 lbs
10.3 kg / 22.7 lbs
14.8 kg / 32.6 lbs
13.0 kg / 28.7 lbs
18.0 kg / 39.7 lbs
16.2 kg / 35.7 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
(Width x Height x Depth)
without stand
APPENDIX
Weight
with stand
without stand
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
Supported movie files
128
■
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
Refer to p. 90
The specifications shown above may be changed without prior notice for quality improvement.
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
Power requirement
37LH3***
32LH35FR-TE/LE
32LH33FR-TC/LC
32LH30FR-TC/LC
37LH35FR-TE/LE
37LH33FR-TC/LC
37LH30FR-TC/LC
42LH3***
47LH3***
42LH35FR-TE/LE
42LH33FR-TC/LC
42LH30FR-TC/LC
47LH35FR-TE/LE
47LH33FR-TC/LC
47LH30FR-TC/LC
805.0 x 586.0 x 211.0 mm
31.7 x 23.0 x 8.3 inches
922.0 x 660.0x 270.6mm
36.3x 26.0 x 10.7 inches
805.0x 531.0x 79.9mm
31.7 x 20.9 x 3.2 inches
922.0 x 595x 88.0mm
36.3x 23.4 x 3.5 inches
1028.0x 658.6x 88.7mm
40.5 x 25.9 x 3.5 inches
1140.6 x 722.9 x 99.0 mm
44.9 x 28.5 x 3.9 inches
12.1 kg / 26.6 lbs
11.0 kg / 24.2 lbs
14.9 kg / 32.8 lbs
13.1 kg / 28.9 lbs
18 kg / 39.7 lbs
16.2 kg / 35.7 lbs
22.5 kg / 49.6 lbs
19.9 kg / 43.9 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
1028.0 x 716.4 x 270.6mm 1140.6 x 788.3 x 318.9 mm
40.5x 28.2 x 10.7 inches 44.9 x 31.0 x 12.5 inches
19LU5***
22LU5***
26LU5***
19LU50R-TA/LA
19LU51R-TB/LB
22LU50FR-TA/LA
22LU51FR-TB/LB
26LU50FR-TA/LA
26LU51FR-TB/LB
462.0 x 373.0 x 182.0 mm
18.2 x 14.7 x 7.2 inches
529.1 x 416.6 x 196.0 mm
20.9 x 16.4 x 7.7 inches
668.0 x 538.3 x 236 mm
26.2 x 21.1 x 9.3 inches
462.0 x 305.0 x 65.0 mm
18.2 x 12.0 x 2.6 inches
529.1 x 342.3 x 65.0 mm
20.9 x 13.5 x 2.6 inches
668.0 x 456 x 81.0 mm
26.3 x 17.9 x 3.1 inches
4.4 kg / 9.7 lbs
3.7 kg / 8.2 lbs
5.4 kg / 11.9 lbs
4.6 kg / 10.2 lbs
8.9 kg / 19.6 lbs
7.7 kg / 17 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Humidity
Supported movie files
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
Refer to p. 90
APPENDIX
Storage Temperature
■
32LH3***
The specifications shown above may be changed without prior notice for quality improvement.
129
APPENDIX
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
APPENDIX
Weight
with stand
without stand
Power requirement
47LH5***
55LH5***
37LH50YR-TA/LA
42LH50YR-TA/LA
47LH50YR-TA/LA
55LH50YR-TA/LA
940.8 x 665.2x 296.2mm 1052.2 x 719.1 x 296.2mm
41.5x 28.3 x 11.7 inches
37.1x 26.2 x 11.7 inches
1173.4 x 789.7x 337.4mm 1357.0 x 901.0 x 423.0 mm
46.2x 31.1 x 13.3 inches 53.4 x 35.5 x 16.7 inches
940.8 x 603.5x 90.6mm
37.1x 23.8 x 3.6 inches
1052.2 x 657.3 x 90.8mm
41.5 x 25.9 x 3.6 inches
1173.4x 723.4x 100.8mm 1357.0 x 835.4 x 109.6 mm
46.2x 28.5 x 4.0 inches
53.4 x 32.9 x 4.3 inches
16.3 kg / 35.9 lbs
14.5 kg / 32.0lbs
19.0 kg / 41.9 lbs
17.2 kg / 37.9 lbs
23.4 kg / 51.6 lbs
20.8 kg / 45.9 lbs
36.4 kg / 80.2 lbs
32.9 kg / 72.5 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
32LH7***
37LH7***
42LH7***
47LH7***
32LH70YR-TA/LA
37LH70YR-TA/LA
42LH70YR-TA/LA
47LH70YR-TA/LA
803 x 632.9 x 284.8 mm
31.6 x 24.9 x 11.2 inches
903x 689.1x 299.5mm
35.5x 27.1 x 11.7inches
1009.7 x 753.6 x 334.4 mm
39.7 x 29.6x 13.1 inches
1123.5 x 823.4x 372.8 mm
44.2 x 32.4 x 14.7 inches
803 x 584.2 x 75mm
31.6 x 23 x 2.9 inches
903 x 639.4x 51.8mm
35.5 x 25.1 x 2.0inches
1009.7 x 695.4 x 39.7 mm
39.7 x 27.3 x 1.5inches
1123.5 x 765.4x 40.9 mm
44.2 x 30.1 x 1.6inches
13.5kg / 29.7 lbs
11.6kg /25.5 lbs
16.2kg / 35.7 lbs
14.1 kg / 31.0lbs
19.8 kg / 43.7 lbs
17.2 kg / 37.9lbs
26.4 kg / 58.2 lbs
22.8 kg / 50.2 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
42LH9***
47LH9***
42LH90QR-TA/LA
47LH90QR-TA/LA
1065.9 x 776 x 361.7 mm
42 x 30.5 x 14.2 inches
1179 x 851.4 x 398.8 mm
46.4x 33.5 x 15.7 inches
1065.9 x 716.4 x 94.4 mm
42 x 28.2 x 3.7 inches
1179 x 780.6 x 105.9 mm
46.4 x 30.7 x 4.2 inches
23.2 kg / 51.1 lbs
19.5 kg / 42.9 lbs
27.3 kg / 60.1 lbs
23.5 kg / 51.8 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
Supported movie files
■
42LH5***
Television System
External Antenna Impedance
130
37LH5***
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
Refer to p. 90
The specifications shown above may be changed without prior notice for quality improvement.
32SL8***
42SL8***
47SL8***
55SL8***
32SL80YR-TA/LA
42SL80YR-TA/LA
47SL80YR-TA/LA
55SL80YR-TA/LA
with stand
764.8 x 550.2x 224.8mm
30.1x 21.7 x 8.9 inches
1001.2 x 688.7x 261.0mm 1109.6 x 751.7 x 320.2 mm
39.4x 27.1 x 10.3 inches
43.7 x 29.6 x 12.6 inches
1279 x 853.3x 320.2mm
50.4 x 33.6 x 12.6 inches
without stand
764.8 x 490.4x 49.8mm
30.1x 19.3 x 2.0 inches
1001.2 x 623.2x 45.0mm
39.4x 24.5 x 1.8 inches
1109.6 x 685.3x 45.5mm
43.7x 27.0 x 1.8 inches
1279x 780.5 x 45.0mm
50.4x 30.7 x 1.8 inches
12.9 kg / 28.4 lbs
11.2 kg / 24.7 lbs
21 kg / 46.3 lbs
18.7 kg / 41.2 lbs
26.6kg / 58.6 lbs
23.7 kg / 52.2 lbs
39.9 kg / 88.0 lbs
34.7 kg / 76.5 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
MODELS
Dimensions
(Width x Height x Depth)
with stand
Weight
without stand
Power requirement
32SL8***
42SL8***
47SL8***
32SL80YR-TB/LB
42SL80YR-TB/LB
47SL80YR-TB/LB
764.8 x 550 x 230 mm
30.1 x 21.7 x 9.1 inches
1001.2 x 689.6x 286.5mm
39.4x 27.1 x 11.3 inches
1109.6 x 753.7 x 286.5 mm
43.7 x 29.7 x 11.3 inches
764.8 x 490.4 x 49.8 mm
30.1 x 19.3 x 2.0 inches
1001.2 x 623.2x 45.0mm
39.4x 24.5 x 1.8 inches
1109.6 x 685.3x 45.5mm
43.7x 27.0 x 1.8 inches
14.0 kg / 30.9 lbs
11.2 kg / 24.7 lbs
22.7 kg / 50.0 lbs
18.7 kg / 41.2 lbs
27.6 kg / 60.8 lbs
23.6 kg / 52.0 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Supported movie files
■
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
Refer to p. 90
APPENDIX
Storage Humidity
75 Ω
The specifications shown above may be changed without prior notice for quality improvement.
131
APPENDIX
MODELS
Dimensions
42LH60YR-TA/LA
42LH61YR-TB/LB
47SL9***
42SL90QR-TA/LA 47SL90QR-TA/LA
1105 x 720.3 x 270.6 mm
43.5x 28.4 x 10.7 inches
1009.2 x 694.5x 286.5mm 1119.6 x 757.1 x 286.5 mm
39.7 x 27.3 x 11.3 inches 44.1 x 29.8 x 11.3 inches
without stand
886.8 x 532.1 x 102.6mm
34.9 x 20.9 x 4.0 inches
1105x 652.7x 102.6mm
43.5 x 25.7 x 4.0 inches
1009.2 x 629.7x 29.3 mm 1119.6 x 691.3x 29.3 mm
39.7 x 24.8 x 1.2 inches 44.1x 27.2 x 1.2 inches
14.4 kg / 31.7 lbs
13.2 kg / 29.1 lbs
22.6 kg / 49.8 lbs
20.5 kg / 45.2 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
with stand
Power requirement
24.6 kg / 54.2 lbs
20.1 kg / 44.3 lbs
28.5 kg / 62.8 lbs
24.0 kg / 52.9 lbs
AC100-240V~ 50/60Hz AC100-240V~ 50/60Hz
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
Supported movie files
APPENDIX
132
32LH60YR-TA/LA
32LH61YR-TB/LB
42SL9***
886.8 x 592.6 x 210.8 mm
34.9 x 23.3 x 8.3 inches
without stand
■
42LH6***
with stand
(Width x Height x Depth)
Weight
32LH6***
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
Refer to p. 90
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
Except 32/42LH6***, 42/47LH9***, 32/42/47/55SL8***, 42/47SL9***
■
This feature is not available for all models.
Code (Hexa)
POWER
INPUT
RATIO
Q.MENU
MENU
MARK/FAV
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN
Energy Saving
AV MODE
+
P /PAGE
P /PAGE
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.Option
SLEEP
SIMPLINK
GG FF
A Stop
G Play
l l Pause
FF Rew
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
APPENDIX
08
0B
79
45
43
1E
07
06
40
41
44
28
95
30
02
03
00
01
09
10 ~19
53
1A
72
71
63
61
20
21
0E
7E
7C
8E
71
63
61
21
Function
133
APPENDIX
Only 42/47LH9***, 42/47SL9***
■
This feature is not available for all models.
Code (Hexa)
APPENDIX
134
08
0B
45
43
1E
07
06
40
41
44
28
95
30
02
03
00
01
09
10 ~19
53
1A
72
71
63
61
20
21
7E
7C
8E
0F
B1
B0
BA
8F
79
Function
POWER
INPUT
Q.MENU
MENU
MARK/FAV
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN
Energy Saving
AV MODE
+
P /PAGE
P /PAGE
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.Option
SIMPLINK
GG FF
TV
A Stop
G Play
l l Pause
FF Rew
RATIO
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
(Except 32/42LH6***, 32/42/47/55SL8***)
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note:
■ RS-232C connection cables are not supplied with
the product.
■ In USB and Bluetooth mode, it doesn’t support RS232C function.
RS-232C IN
(CONTROL)
AUDIO IN
(RGB/DVI)
RGB IN (PC)
/MONO
AUDIO
AV I
VIDEO
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
APPENDIX
RS-232C Configurations
TXD
RXD
GND
DTR
DSR
RTS
CTS
135
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .140
OPTION
Move
OK
OPTION
OK
E
E
Input Label
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set
Set ID
ID
:1
:1
Set
Set ID
ID
:1
:1
Power Indicator
: On
Power Indicator
F
1
Demo Mode
Off
Demo Mode
Off
Mode Setting
: Home Use
Mode Setting
: Home Use Close
Factory Reset
1 MENU
Move
G
Factory Reset
Select O P T I O N.
2
OK
3
OK
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
APPENDIX
• Press R E T U R N to move to the previous menu screen.
136
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
Stop bit : 1 bit
A Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 ~ 01
02. Aspect Ratio
k
c
Refer to p.138
03. Screen Mute
k
d
04. Volume Mute
k
e
05. Volume Control
k
f
COMMAND1 COMMAND2
DATA
(Hexadecimal)
13. Balance
k
t
00 ~ 64
14. Colour Temperature
k
u
00 ~ 02
Refer to p.138
15. Abnormal Status
k
z
FF
00 ~ 01
16. Auto Configure
j
u
01
00 ~ 64
17. Channel Add/Del
m
b
00 ~ 01
06. Contrast
k
g
00 ~ 64
18. Key
m
c
Key Code
07. Brightness
k
h
00 ~ 64
19. Input select (Main)
x
b
Refer to p.140
08. Colour
k
i
00 ~ 64
20. Control Back Light
m
g
00 ~ 64
09. Tint
k
j
00 ~ 64
21. Energy Saving
j
q
00 ~ 05
10. Sharpness
k
k
00 ~ 64
22. Tune Command
m
a
Refer to p.141
11. OSD Select
k
k
l
m
00 ~ 01
23. Treble
k
r
00 ~ 64
00 ~ 01
24. Bass
k
s
00 ~ 64
12. Remote Control Lock
/Key Lock Mode
Transmission / Receiving Protocol
OK Acknowledgement
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK][Data][x]
[Command 1] : First command to control the set.(j,k,m or x)
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected TV is
controlled. Set ID is indicated as decimal (1~ 99)
on menu and as Hexa decimal (0x0~ 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
Error Acknowledgement
APPENDIX
Transmission
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this format
when receiving abnormal data form non-viable functions or
communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will send the ‘a’, ‘b’.
[NG]: use the large character.
137
APPENDIX
0 5 . Volume Control (Command: k f)
0 1 . Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 140.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.”
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom
Data 06: Original
Data 07: 14:9
Data 09: Just Scan
Data 10~1f: Cinema Zoom
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p) mode, J u s t
S c a n is available.
0 3 . Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
APPENDIX
Data 00 : Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Data 00 : Video Mute off
Data 10 : Video Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 140.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 140.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Refer to ‘Real data mapping 1’. See page 140.
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
138
Refer to ‘Real data mapping 1’. See page 140.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
15. Abnormal State (Command: k z)
To adjust the screen sharpness.
To recognize an abnormal state.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data FF: Read
Data Min: 00 ~ Max: 64
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Refer to ‘Real data mapping 1’. See page 140.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
12. Remote Control Lock/Key Lock Mode (Command: k m)
To lock the remote control and the front panel
16 . Auto Configure (Command: j u)
controls on the set.
To adjust picture position and minimize image
Transmission [k][m][ ][Set ID][ ][Data][Cr]
shaking automatically. It works only in RGB (PC)
mode.
Data 00: Lock off
Data 01: Lock on
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
* When main power is on/off, remote control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
17. Channel Skip(Command: m b)
To set skip status for the current Programme.
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Data 00 : Skip
01 : Add
Data Min: 00 ~ Max: 64
APPENDIX
13. Balance (Command: k t)
Refer to ‘Real data mapping 1’. See page 140.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
18. K e y (Command: m c)
To send IR remote key code.
14. Colour Temperature (Command: k u)
To adjust colour temperature.
You can also adjust Colour Temperature in the PICTURE
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 133~134.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
139
APPENDIX
2 0 . C o n t r o l B a c k L i g h t (C o m m a n d : m g )
19. Input select (Command: x b)
(Main Picture Input)
To select input source for TV.
To Control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 ~ Max: 64
( * transmit by Hexadecimal code)
Data: Structure
MSB
0
LSB
0
0
0
External Input
0
0
0
0
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Input Number
External Input
Data
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
2 1 . E n e r g y S a v i n g (C o m m a n d : j q )
To reduce the power consumption of the TV. You can also
adjust Energy Saving in OPTION menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data Min: 00H ~ Max: 05H
Data 00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (Except 19/22/26/32/37/42LH2***, 32/42LF2***,
32/37/42/47LH3***, 19/22/26LU5***)
05 : Screen Off
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
* Real data mapping 1
00 : Step 0
A : Step 10
F : Step 15
10 : Step 16
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
FE : Step 254
FF : Step 255
140
22 . Tune Command / Channel Tuning (Command: m a)
Tune Channel to following Physical number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data0 : 00
Data1: Min: 00 ~ Max: C7
* Refer to ‘Real data mapping 1’ See page 140.
Data2: 00
Acknowledgement [a][ ][Set ID][OK][ ][Data0][Data1][x]
[a][ ][Set ID][NG][ ][Data0][x]
23. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 140.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
2 4 . Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 140.
141
Download PDF