LG | 42PM4700 | LG 42PM4700 Owner’s Manual

User’s Guide Specification
In charger
Creator
Adviser
Approver
Woo Mi-ra
Yang Chul-Min
Kim Jong-ok
22/02/12
22/02/12
DD/MM/YY 22/02/12
1. Model Description
Model
PM97-T
Brand
LG
Part number
Suffix
MP(AU)
Product name
42/50PM47, 50/60PM67,
50/60PM97
MFL67500901
(1202-REV01)
2. Printing Specification
1. Trim Size (Format) : 182 mm x 257 mm
2. Printing Colors
Cover : 1 COLOR (BLACK)
Inside : 1 COLOR (BLACK)
3. Stock (Paper)
2
y y Cover : Uncoated paper , 백상지 60 g/m
2
y y Inside : Uncoated paper , 백상지 60 g/m
4. Printing Method : Off-set
5. Bindery : Saddle Stitch
6. Language : ENG (1)
7. Number of pages : 40
N
O
T
E
S
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Special Instructions
(1) Origin Notification
* LGEIN : Printed in Indonesia
* LGESP : Printed in Brazil
* LGEND : Printed in China
* LGEMA : Printed in Poland
* LGEWA : Printed in U.K.
* LGEMX : Printed in Mexico
* LGEIL : Printed in India
4. Changes
13
12
11
10
9
8
7
6
5
4
3
2
1
Rev.
No.
22/02/12
Mira Woo
DD/MM/YY Creator
EKPC200318
Manual drawing update (Add model name(PM67**) in Magic
Remote Control of Accessories unpacking part)
ECO Number Change description
Pagination sheet
Total pages : 40 pages
Front
Cover
(ENG)
P/No.
Back
Cover
(ENG)
2
...
...
...
...
39
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
PM47**
PM67**
PM97**
P/NO : MFL67500901 (1202-REV01)
www.lg.com
Isolator Usage (Safety Caution)
Isolator QRG
2. Isolator Connection Method.
*Above Pictures may differ from the actual.
 Note:
“Equipment connected to the protective earthing of mains connection of the building, or through other
protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some
circumstances. Connection to a cable distribution system has therefore to be provided through a device
providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
ENGLISH
ENGLISH
 Antenna Isolator Installation Guide:
1. Always use isolator with RF signal port (In wall RF port or in set RF Port).
2. Isolator will protect if there is any voltage difference between GND of power Board and
GND of Antenna Signal, the Antenna contact might be heated and excessive heat might
cause anaccident, therefore Isolator installation is highly recommended.
3. Avoid disconnecting the antenna isolator after installation.
4. When applying RF isolator, a slight loss of signal sensitivity can occur.
5. You can improve safety of TV by efficiently removing power voltage from TV
antenna.
 Antenna Isolator Installation Method:
1. Exterior of Antenna Isolator:
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
3
OPEN SOURCE SOFTWARE NOTICE
4
SAFETY INSTRUCTIONS
10
Viewing 3D Imaging (Only 3D models)
12
INSTALLATION PROCEDURE
12
ASSEMBLING AND PREPARING
12
15
16
17
18
20
21
22
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
23
MAKING CONNECTIONS
23
24
25
25
26
26
27
27
Antenna Connection
HDMI Connection
DVI to HDMI Connection
RGB-PC Connection
Component Connection
Composite Connection
Audio Connection
- Digital optical audio connection
USB Connection
28
REMOTE CONTROL
29
MAGIC REMOTE CONTROL
FUNCTIONS
30
30
30
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
31
USING THE USER GUIDE
32
MAINTENANCE
32
32
Cleaning your TV
- Screen, frame, cabinet and stand
32
- Power cord
32
EXTERNAL CONTROL DEVICE SETUP
33
TROUBLESHOOTING
34
ENVIRONMENTAL INFORMATION
35
SPECIFICATIONS
WARNING
y y If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
y y If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
y y The note helps you to understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
- -A location exposed to direct sunlight
- -An area with high humidity such as a bathroom
- -Near any heat source such as stoves and other devices that produce heat
- -Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
- -An area exposed to rain or wind
- -Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely.
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV.
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
yy
In case if they eat it, take them to consult a doctor immediately.
Do not insert a conductor (like a metal chopstick) into one end of the power cable
yy
while the other end is connected to the input terminal on the wall. Additionally, do
not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)
Do not put or store inflammable substances near the product.
yy
There is a danger of explosion or fire due careless handling of the inflammable
substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
- -The product has been impacted by shock
- -The product has been damaged
- -Foreign objects have entered the product
- -The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man.
yy
This may create a fire hazard or an electric shock hazard.
5~7 times
We recommend that you maintain a distance of at least 5 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
- -The distance between the product and the wall should be more than 10 cm.
- -Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
- -Do not install the product on a carpet or cushion.
- -Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and color of the panel depending on your viewing
yy
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
y y Viewing Time
- - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
y y Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
y y Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
y y 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double
images or discomfort in viewing may be experienced.
y y If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
y y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
y y Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
y y When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the
symptom subsides.
- - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
� Viewing Position
- - Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may
not be able to view 3D contents properly.
Viewing Age
y y Infants/Children
- - Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
- - Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
- - Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
y y Teenagers
- - Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
y y Elderly
- - The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
� Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
� Using modified 3D glasses may cause eye strain or image distortion.
� Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
� The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
y
When
watching 3D videos under fluorescent lights or with three wave length lamps, you may experience
y
the screen blinking. When this occurs, turn the light off or turn it down.
y y Other electronic or communication devices should be turned off or put away from the TV because it can
cause interference and prevent the 3D function from working properly.
y
y When you watch TV lying down, 3D images may look darker or invisible.
ENGLISH
ENG
CAUTION
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y y Image shown may differ from your TV.
y y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yYour TV’s features may vary slightly from country to country depending on channel broadcast system.
y y The available menus and options may differ from the input source or product model that you are
using.
y y New features may be added to this TV in the future.
y y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
y y The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y y Do not use any unapproved items to ensure the safety and product life span.
y y Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s
warranty.
y
y Some models have a thin film attached on to the screen and this must not be removed.
ASSEMBLING AND PREPARING
13
ENERGY AV MODE INPUT
TV
TV
1
4
7
2
5
3
6
8
9
0
FLASHBK
2
3
4
5
6
7
SAVING
LIST
1
LIST
3D
CH
P
A
G
E
Remote Control,
Batteries (AAA)
(See p. 29)
Q.MENU
ENTER
BACK
FLASHBK
MENU INFO
MUTE
MENU INFO
9
0
3D
CH
Magic Remote Control,
Batteries (AA)
(Only 50/60PM97**-TA,
50/60PM67**-TD/TK)
(See p. 30)
P
A
G
E
MUTE
FAV
VOL
8
MARK
FAV
VOL
MARK
EXIT
L/R SELECT
FREEZE
RATIO
P
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Owner’s manual
Power Cord
x4
M4 x 30
x3
M5 x 16
Power Cord Holder
(See p. 23)
Protection Cover
(See p. 20)
Ferrite core
(Depending on model)
(See p. 14)
Cable Holder
(Depending on model)
(See p. 23)
3D Glasses
(AG-350)
(Depending on model)
Screw for assembly
(Only 42/50PM47**-TA/TD,
50/60PM67**-TD, 50PM67**-TK,
50PM97**-TA)
(See p. 19)
x4
M4 x 30
M5 x 16
Screw for assembly
(Only 60PM67**-TK,
60PM97**-TA)
(See p. 19)
Stand Body / Stand Base
(Only 50/60PM67**-TK,
50/60PM97**-TA)
(See p. 19)
Stand Body / Stand Base
(Only 42/50PM47**-TA/TD,
50/60PM67**-TD)
(See p. 19)
Cable management
(Only 50/60PM67**-TK,
50/60PM97**-TA)
(See p. 19)
x5
or
Isolator
(Depending on model)
(See p. 15)
ENGLISH
ENG
SAVING
ENERGY AV MODE INPUT
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to upgrade
yy
of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
(Gray)
10 mm(+ / - 5 mm)
[to an External device]
[to the TV]
[Figure 1]
[Cross Section of
Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
(Black)
[to the TV]
[to a wall plug]
[Figure 2]
[Cross Section of
Ferrite Core]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device.
A (Gray)
[to an External
device]
B (Gray)
[to the TV]
A
A
B
[Cross Section of
Ferrite Core]
[Figure 3]
4 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L, R
cable. Wind the component Y, Pb, Pr, L, R cable on the ferrite core once. Place the ferrite core close
to the TV.
(Black)
[to an External device]
[to the TV]
10 mm(+ / - 5 mm)
[Figure 4]
[Cross Section of
Ferrite Core]
- If there are six ferrite cores, follow as shown in Figure 1,2 and 3.
- If there are seven ferrite cores, follow as shown in Figure 1,2,3 and 4..
For an optimal connection, HDMI cables and USB
yy
devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that
supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
*A
*B
10 mm
18 mm
15 ASSEMBLING AND PREPARING
P
AG-S3**
3D Glasses
AN-WF100
Wireless LAN
Compatibility
AN-MR300
Magic Remote Control
PM47**
PM67**
PM97**
•
•
•
•
AG-S3**
3D Glasses
•
AN-WF100
Wireless LAN
•
AN-MR300
Magic Remote Control
•
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ENG
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
ENGLISH
Separate purchase
ASSEMBLING AND PREPARING
16
ENGLISH
ENG
Parts and buttons
Screen
Remote control and
intelligent sensors1
Power indicator
Speakers
INPUT
SETTINGS
OK
Buttons
Except for
PM47**
AV IN
COMPONENT
IN
VIDEO
Y
PB
Button
/I
SETTINGS
OK ꔉ
H
H
PR
L
R
1
VIDEO
INPUT
L/MONO AUDIO R
2
Connection
panel
AUDIO
Description
Turns the power on or off.
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input.
Adjusts the volume level.
Scrolls through the saved programmes.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
17 ASSEMBLING AND PREPARING
CAUTION
y y Avoid touching the screen at all times, as
this may result in damage to the screen.
y y It is recommended to move the TV in the box
or packing material that the TV originally came
in.
y y Before moving or lifting the TV, disconnect the
power cord and all cables.
y y When holding the TV, the screen should face
away from you to avoid damage.
y y Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
y y When transporting the TV, do not expose the
TV to jolts or excessive vibration.
y y When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ENG
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
y y When transporting a large TV, there should be
at least 2 people.
y y When transporting the TV by hand, hold the TV
as shown in the following illustration.
ENGLISH
Lifting and moving the TV
ASSEMBLING AND PREPARING
18
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Only 42/50PM47**-TA/TD, 50/60PM67**-TD
1
M5 x 16
3EA
Only 50/60PM67**-TK, 50/60PM97**-TA
1
Stand Body
Front
Stand Body
Front
Only 50PM67**-TK, 50PM97**-TA
M5 x 16
3EA
Only 60PM67**-TK, 60PM97**-TA
Stand Base
M5 x 16
5EA
Stand Base
2
2
3
3
M4 x 30
4EA
4
M4 x 30
4EA
Cable management
19 ASSEMBLING AND PREPARING
Only 42/50PM47**-TA/TD, 50/60PM67**-TD
M4 x 30
4EA
Only 50/60PM67**-TK, 50/60PM97**-TA
M4 x 30
4EA
2
Protection Cover
3
M4 x 30
2EA
y y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y y Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
NOTE
y y When installing the wall mounting bracket,
use the Protection Cover.
y y This will protect the opening from
accumulating dust and dirt.
y y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ENG
1
CAUTION
ENGLISH
To detach the stand,
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
20
Securing the TV to a wall
1 Lift and tilt the TV into its upright position on a
table.
- - Leave a 10 cm (minimum) space from the
wall for proper ventilation.
(This feature is not available for all models.)
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20
20
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- - If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
y y Make sure that children do not climb on or
hang on the TV.
NOTE
y y Use a platform or cabinet that is strong and
large enough to support the TV securely.
y y Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
CAUTION
When adjusting the angle of the product,
watch out for your fingers.
» »Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
21 ASSEMBLING AND PREPARING
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
y y Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
y y If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
y y Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y y Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
42/50PM47**
50PM67**
50PM97**
VESA (A x B)
400 x 400
Standard screw M6
60PM67**
60PM97**
600 x 400
M8
y y Use the screws that are listed on the VESA
standard screw specifications.
y y The wall mount kit includes an installation
manual and necessary parts.
y y The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
y y The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
y y For more information, refer to the manual
supplied with the wall mount.
ENG
CAUTION
ENGLISH
Mounting on a wall
ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
Power Cord Holder
2 Gather and bind the cables with the Cable
Holder.
Cable Holder
CAUTION
Do not move the TV by holding the cable
holder and power cable holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
22
23 MAKING CONNECTIONS
Antenna Connection
This section on MAKING CONNECTIONS mainly
uses diagrams for the PM97** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
Wall Antenna
Socket
Add Isolator
NOTE
y y The external device connection may differ
from the model.
y y Connect external devices to the TV
regardless of the order of the TV port.
y y If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
y y Refer to the external equipment’s manual for
operating instructions.
y y If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
y y In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
y y In PC mode, some resolution settings may
not work properly depending on the graphics
card.
NOTE
y y Use a signal splitter to use more than 2 TVs.
y y If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y Use a isolator protector when connecting
antenna/cable.
y y If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y y An antenna cable and converter are not
supplied.
ENG
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
ENGLISH
MAKING
CONNECTIONS
MAKING CONNECTIONS
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
DVD / Blu-Ray / PC
HD Cable Box / HD STB
USB
SB IN 1/ USBApps
A
/ DVI IN 2 U
Choose any HDMI input port to connect. It does
not matter which port you use.
IN 1(ARC)
ENGLISH
ENG
HDMI Connection
HDMI
(*Not Provided)
NOTE
y y It is recommended to use the TV with the
HDMI connection for the best image quality.
y y Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
y y High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
y y Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
y y Supported HDMI Audio format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI input 1 (ARC) port.
When connected with a high-speed
yy
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
24
25 MAKING CONNECTIONS
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Transmits the video signal from PC to the TV. To
transmit an audio signal, connect an audio cable.
AUDIO IN
(RGB/DVI)
RGB IN
(PC)
IN 1(ARC)
( C)
USB
SB IN 1/ USBApps
A
/ DVI IN 2 U
Choose any HDMI input port to connect. It does
not matter which port you use.
(*Not Provided)
PC
(*Not Provided)
RGB OUT (PC) AUDIO OUT
AUDIO OUT
DVI OUT
DVD / Blu-Ray / PC / HD Cable Box / HD STB
NOTE
y y Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in
use.
ENG
RGB-PC Connection
ENGLISH
DVI to HDMI Connection
MAKING CONNECTIONS
26
Composite Connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
L/MONO AUDIO R
2
PR
L
R
Y
1
AUDIO
VIDEO
PB
L
R
AUDIO
VIDEO
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
(*Not Provided)
RED
L(MONO) R
RED
WHITE
YELLOW
WHITE
RED
BLUE
GREEN
VIDEO
VIDEO
PR
YELLOW
1
2
RED
PB
L/MONO AUDIO R
WHITE
Y
AV IN
VIDEO
COMPONENT
IN
AV IN
VIDEO
COMPONENT
IN
ENGLISH
ENG
Component Connection
AUDIO
AUDIO
DVD / Blu-Ray / HD Cable Box
VCR / DVD / Blu-Ray / HD Cable Box
NOTE
y y If cables are installed incorrectly, it could
case the image to display in black and white
or with distorted colour.
27 MAKING CONNECTIONS
You may use an optional external audio system
instead of the built-in speaker.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
NOTE
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
HDD
HUB
HDD IN
USB Hub
Digital optical audio connection
/ DVI IN 2 USB IN 1/ USB Apps USB IN 2
y y If you use an optional external audio device
instead of the built-in speaker, set the TV
speaker feature to off.
USB
(*Not Provided)
(*Not Provided)
NOTE
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
NOTE
y y Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
y y Audio with ACP (Audio Copy Protection)
function may block digital audio output.
y y To use a USB Hub device, make sure that it
is connected to the USB Hub port.
y y Connect the external power source if your
USB is needed.
y y Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on the
TV directly.
ENG
USB Connection
ENGLISH
Audio Connection
REMOTE CONTROL
28
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y y Do not mix old and new batteries, as this may damage the remote control.
y y In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(User Guide)
Sees user-guide.
RATIO
Resizes an image.
EXIT
Clears all on-screen displays and return to TV
viewing.
RATIO
1 Colour buttons
These access special functions in some
menus.
( : Red,
: Green,
: Yellow,
: Blue)
TV /
RAD
INPUT
Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
LIST
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
FAV
Accesses your favourite programme.
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
2 TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SUBTITLE
Recalls your preferred subtitle in digital
mode.
FAV
P
MUTE
Used for viewing 3D video.
PAGE
Moves to the previous or next screen.
SETTINGS
Accesses the main menus.
SETTINGS
HOME
MY APPS
OK
HOME
Accesses the Home menus.
MY APPS
Shows the list of Apps.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your
input.
(Back)
Returns to the previous level.
GUIDE
Shows programme guide.
INPUT
GUIDE
1
2
EXIT
SUBTITLE
TEXT
T.OPT
Q.MENU
LIVE TV
REC
ENERGY
INFO
SAVING
or
2
SUBTITLE
TEXT
ENERGY
SAVING
T.OPT
Q.MENU
P
A
G
E
Q. MENU
Accesses the quick menus.
LIVE TV
Return to LIVE TV. (Depending on model)
Control buttons (
)
Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK or
DVR).
REC
Uses to adjust DVR menu. (Depending on model)
ENERGY SAVING
Adjusts the brightness of the screen to reduce
energy consumption.
INFO
Views the information of the current programme
and screen. (Depending on model)
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the
SIMPLINK menu.
29 MAGIC REMOTE CONTROL FUNCTIONS
This item is not included for all models.
When the message “Magic Remote Control battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure
to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y y Do not mix old and new batteries, as this may damage the remote control.
y y Do not need Magic remote Dongle to operate the magic remote control. The Receiver is built into the TV.
Pointer (RF transmitter)
Blinks the light when operating.
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
BACK
HOME
HOME
Accesses the Home menu.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation
button while moving the pointer
on the screen, the pointer
disappears, and the Magic
Remote Control works as a
regular remote control.
To display the pointer again,
shake the Magic Remote
Control from side to side.
P
MY APPS
+
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
MUTE
Mutes all sounds.
MY APPS
Shows the list of Apps.
Used for viewing 3D video.
11-1 Brief Info Title Test...
1
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Shows information about the current
programme and screen.
2
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Set the programme you want.
You can press the ꕌPꕍ button on the remote
control to set the programme.
Info.
My Apps
3 You can select Quick Menu.
3
ENG
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
Registering Magic Remote
Control
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
BACKto register
HOME
How
the Magic Remote Control
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
complete registration.
How to re-register the Magic Remote Control
BACK
HOME
1 Press and hold the BACK
and HOME buttons together
for 5 seconds to reset, then
register it by following “How
to register the Magic Remote
Control” above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
30
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly
to left or right. Then, it will
automatically appear on the
screen.
» »If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
» »If the pointer does not work
properly, leave the remote
control for 10 seconds then
use it again.
Precautions to Take when
Using the Magic Remote
Control
Use the remote control within the maximum
yy
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
The Magic Remote Control may be damaged
yy
or may malfunction if it is dropped or receives
a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
31 USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the HOME button to access the HOME
menu.
2 Select User Guide and press Wheel(OK).
1
User Guide
OPTION > To set language
HOME  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
PROGRAMME Setting
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several
audio languages, you can select the language you want.
PICTURE, SOUND Setting
Subtitle
Language
OPTION
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle
languages are broadcast.
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
LG SMART Function
Advanced Function
2
Information
My Apps
Input List
Settings
Live TV
Search
Internet
3D
LG Smart W
TV Guide
User Guide

y y You can also access the User Guide by
pressing (User Guide) in the remote
control.
4
3
To use input device
To use Energy Saving feature
PROGRAMME Setting
To set time options
PICTURE, SOUND Setting
OPTION
Disabled Assistance
Advanced Function
Information
To set TV lock options
To set language
LG SMART Function
2
Zoom In
Close
HOME  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several
audio languages, you can select the language you want.
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
NOTE
1
3
Recent List
User Guide
User Guide
Try Now
To set Magic Remote Control
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
4
Allows to browse the description of the
function you want from the index.
Try Now
3
Zoom Out
Close
1
Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2
Moves to the selected menu directly from the
User Guide.
3
Zooms in or out the screen.
ENG
ENGLISH
USING THE USER GUIDE
MAINTENANCE
32
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y y Make sure to turn the power off and disconnect the power cord and all other cables first.
y y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
y y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
y y Avoid touching the screen at all times, as this may result in damage to the screen.
y y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
y y Do not use any chemicals as this may damage the product.
y y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
TROUBLESHOOTING 33
TROUBLESHOOTING
Solution
Cannot control
the TV with the
remote control.
y Check the remote control sensor on the product and try again.
y Check if there is any obstacle between the product and the remote control.
to , to ).
y Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
y Check if the product is turned on.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
y Check the power control settings. The power supply may be interrupted.
y Check if the Auto sleep feature is activated in the Time settings.
y If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting
to the PC (RGB/
HDMI DVI),
‘No signal’ or
‘Invalid Format’ is
displayed.
y
y
y
y
Turn the TV off/on using the remote control.
Reconnect the RGB/HDMI cable.
Restart the PC with the TV on.
Try to change the PC resolution.
Audio
Problem
Resolution
No sound is produced while images yyPress
+ or - button.
are displaying.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
yyCheck if the TV Speaker feature is activated in the menu option.
No output from one of the speakers
yyAdjust Balance in the menu option.
Unusual sound from inside the TV
is produced.
yyA change in ambient humidity or temperature may result in an unusual noise
when the product turns on or off. There is no problem with your product.
Video
Problem
Resolution
An image displays in black and
white or the colour quality is poor.
yyAdjust the colour setting in the menu option.
yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
yyCheck if there is local interference such as an electrical appliance or power
tool.
Lines or streaks appear on images
yyCheck the antenna or aim the antenna to the correct direction.
Afterimages (ghosts) appear when
the product turns off
yyPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen appears extremely dark.
yyAdjust the brightness and contrast in the menu option.
“No Signal” appears on the screen.
yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
Black spots appear on the screen.
yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the panel.
This is normal.
The display offset is wrong.
yyAdjust the position setting in the menu option.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background yyCheck the video cable connections.
of the screen.
Horizontal noises appear or charac- yyAdjust the Phase setting in the menu option.
ters blur.
Refer to the “SCREEN”.
The reception on some channels
is poor
yyScroll to other channels. There may a problem with the broadcast.
yyThe station signal may be weak. Aim the antenna to the correct direction.
yyCheck if there is local interference such as an electrical appliance or power
tool.
ENGLISH
Problem
34 ENVIRONMENTAL INFORMATION
Disposal of your old appliance
ENGLISH
1. When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the e-waste (Management and Handling) Rules, 2011.
2. All electrical & electronic products should be disposed of separately from the municipal
waste steam via designated collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.
5. This product does not contain any of the hazardous substances as specified in the rule 13 (1) and
(2) of the e-waste (Management and Handling Rules, 2011.
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Wireless LAN module(WN8122E) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz
Modulation
CCK / OFDM / MIMO
802.11a: 14 dBm
Output Power
(Typical)
802.11b: 17 dBm
802.11g: 15 dBm
802.11n - 2.4GHz: 13.5 dBm
802.11n - 5GHz: 12 dBm
802.11a/g: 54 Mbps
Data rate
802.11b: 11 Mbps
802.11n: 300 Mbps
Antenna Gain
(Typical)
Occupied bandwidth
2400 to 2483.5 MHz: -0.79dBi
5150 to 5250 MHz: 0.62dBi
5725 to 5850 MHz: 0.52dBi
802.11a/b/g: HT20
802.11n: HT20/40
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
Bluetooth module (BM-LDS302) specification
Standard
Frequency Range
Output Power (Max.)
Data rate (Max.)
Communication Distance
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
3 Mbps
Line of Open Sight approx. 10 m
ENGLISH
ENG
SPECIFICATIONS
35
36 SPECIFICATIONS
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
42PM47**
50PM47**
42PM4700-TA
42PM4710-TD
50PM4700-TA
50PM4710-TD
983.6 x 655.0 x 246.7
1168.0 x 758.0 x 297.0
983.6 x 601.3 x 58
1168.0 x 704.0 x 53.0
With stand (kg)
20.6
28.2
Without stand (kg)
19.0
25.8
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
Power requirement
AC 100-240 V~ 50 / 60 Hz
50PM67**
MODELS
Dimensions
(W x H x D)
Weight
50PM6700-TD
50PM6700-TK
With stand (mm)
1168.0 x 758.0 x 297.0
1168.0 x 768.0 x 297.0
Without stand (mm)
1168.0 x 704.0 x 53.0
1168.0 x 704.0 x 53.0
With stand (kg)
28.8
28.1
Without stand (kg)
26.4
26.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
60PM67**
MODELS
Dimensions
(W x H x D)
Weight
60PM6700-TD
60PM6700-TK
With stand (mm)
1386.8 x 883.2 x 354.7
1386.8 x 906.0 x 346.0
Without stand (mm)
1386.8 x 818.2 x 53.0
1386.8 x 818.2 x 53.0
With stand (kg)
40.6
39.8
Without stand (kg)
36.4
36.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
50PM97**
60PM97**
50PM9700-TA
60PM9700-TA
With stand (mm)
1168.0 x 765.0 x 297.0
1386.8 x 897.0 x 346.0
Without stand (mm)
MODELS
Dimensions
(W x H x D)
Weight
1168.0 x 701.0 x 53.4
1386.8 x 827.2 x 53.4
With stand (kg)
28.2
40.2
Without stand (kg)
26.5
36.8
Power requirement
Environment condition
AC 100-240 V~ 50 / 60 Hz
Operating temperature
0 °C to 40 °C
Operating humidity
Less than 80 %
Storage temperature
-20 °C to 60 °C
Storage humidity
Less than 85 %
SPECIFICATIONS
Television System
Programme
Coverage
Australia
Television System
Programme
Coverage
Indonesia,
Israel, Myanmar,
Sri Lanka
Television System
Programme
Coverage
South Africa
Television System
Programme
Coverage
Vietnam,
Malaysia
Television System
Programme
Coverage
Iran, Algeria,
Tunisia, Digital
model
Television System
Programme
Coverage
Analogue model,
India, Thailand,
--
Television System
Programme
Coverage
External Antenna
Impedance
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
UHF 21 to 69
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
UHF 21 to 69
DVB-T
VHF 4 to 11, 13
UHF 21 to 68
DVB-T
VHF 6 to 12,
UHF 21 to 69
DVB-T
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to
44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
75 Ω
75 Ω
ENGLISH
ENG
New Zealand,
Singapore
Digital TV
37
38 SPECIFICATIONS
ENGLISH
ENG
HDMI/DVI-DTV supported mode
Component port connecting information
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component ports
on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
Y
Y
Y
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
SPECIFICATIONS
39
y yMedia contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D
Top & Bottom to play in 3D.
y yVideo, which is input as HDMI,USB,DLNA, is switched into the 3D screen automatically. (This funtion does
not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically. )
y y2D->3D mode is available to watch for all signals.
y yFor models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.
Input
Signal
Resolution
640X480
480p
720X480
640X480
720X480
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
62.938 / 63
Frame packing, Line alternative
59.94/ 60
31.469 / 31.5
62.5
576p
720p
720X576
1280*720
HDMI
31.25
1080p
RGB
1080p
720p
1920X1080
1920X1080
1920X1080
1280X720
Component
1080i
USB
DLNA
DTV
1080p
1080p
1920X1080
1920X1080
1920X1080
Side-by-side(Full), Top-and-Bottom,
Side-by-side(half)
Frame packing, Line alternative
50
75
50
89.91/90
59.94 / 60
Side-by-side(Full), Top-and-Bottom,
Side-by-side(half)
Frame packing, Line alternative
37.5
50
44.96 / 45
59.94 / 60
Side-by-side(Full), Top-and-Bottom
Side-by-side(half), Single Frame Sequential
67.432 / 67.5
59.94 / 60
Frame packing, Field alternative
56.25
1080i
Playable 3D video format
62.5
50
33.72 / 33.75
59.94 / 60
28.125
50
53.946 / 54
23.97 / 24
67.432/67.5
29.976 / 30
Field alternative
Frame packing
Side-by-side(Full), Top-and-Bottom,
Side-by-side(half)
Frame packing, Line alternative
26.97 / 27
23.97 / 24
33.716 / 33.75
29.976 / 30.00
56.250
50
67.43 / 67.5
59.94 / 60
Top-and-Bottom, Side-by-side(half),
Checkerboard, Single Frame Sequential,
Row Interleaving, Column Interleaving
Side by Side, Top & Bottom
67.5
60
37.5
50
45
60
28.125
50
33.75
60
33.75
33.75
Side-by-side(Full), Top-and-Bottom,
Side-by-side(half), Checkerboard
Side by Side, Top & Bottom
30
Side by Side, Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving,
MPO(Photo)
(Photo : Side by Side(half), Top & Bottom)
30
Side by Side, Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving
(Photo : Side by Side(half), Top & Bottom)
Signal
Playable 3D video format
720p, 1080i
Side by Side, Top & Bottom
ENGLISH
ENG
3D supported mode
:$55$17<&$5'
7KLV/*/('/&'/&'/PDPTVFRPHVZLWKPRQWKVRQVLWH&RPSUHKHQVLYHZDUUDQW\IURPWKHGDWHRISXUFKDVHRIWKHSURGXFWDJDLQVW
GHIHFWLYHPDWHULDOZRUNPDQVKLS,QFDVHRIGHIHFW/*(OHFWURQLFV,QGLD3YW/WG/*(,/XQGHUWDNHVWRJHWWKHVHWUHSDLUHGIUHHRIFKDUJHGXULQJ
ZDUUDQW\SHULRG
7HUPV&RQGLWLRQ
7KHZDUUDQW\LVFRQILQHGWRWKHILUVWSXUFKDVHURIWKH/*SURGXFWRQO\LVQRQWUDQVIHUDEOH
3URRIRISXUFKDVHLHELOORIVDOHLQYRLFHRUSXUFKDVHUHFHLSWPXVWEHSUHVHQWHGZKHQUHTXHVWLQJVHUYLFHXQGHUZDUUDQW\
5HSDLUVUHSODFHPHQWVZLOOEHFDUULHGRXWE\WKH$XWKRUL]HG6HUYLFH&HQWHUVRI/*(,/,QFDVHWKHFXVWRPHUVKLIWVWKHSODFHRIUHVLGHQFH
GXULQJZDUUDQW\SHULRGLWLVDGYLVHGWRFRQWDFW$XWKRUL]HG6HUYLFH&HQWUHGLUHFWO\RUFDOORXUKHOSOLQHQR
VWROOIUHH
5HSDLUVXQGHUZDUUDQW\VKDOOEHFDUULHGRXWE\DQDXWKRUL]HGVHUYLFHSHUVRQQHORQO\7KHGHWDLOVRIFHQWUDOL]HGKHOSOLQHVDUHDVRYHUOHDI
)RUXQLWVLQVWDOOHGEH\RQGPXQLFLSDOOLPLWVRIWKHMXULVGLFWLRQRIFRPSDQ\
V$XWKRUL]HG6HUYLFH&HQWHURQVLWHZDUUDQW\LVQRWDSSOLFDEOHDQG
LWLVWKHUHVSRQVLELOLW\RIWKHSXUFKDVHUWRFRQWDFWWKHQHDUHVWDXWKRUL]HGVHUYLFHFHQWHUDQGEULQJWKHXQLWWRWKHDXWKRUL]HGVHUYLFHFHQWHUDW
LWVRZQFRVWDQGULVN$OOH[SHQVHVLQFXUUHGLQFROOHFWLQJWKHXQLWVRUSDUWVWKHUHRIIURPWKHFRPSDQ\
VDXWKRUL]HGVHUYLFHFHQWHUDVZHOODV
H[SHQVHVLQFXUUHGZLWKGHSXWL]LQJRIVHUYLFHSHUVRQQHOWHFKQLFLDQVWRZDUGVFRQYH\DQFHDQGRWKHULQFLGHQWDOVHWFZLOOEHERUQHE\WKH
FXVWRPHU/RFDO&KDUJHVIRUWUDQVSRUWDWLRQDQGKDQGOLQJFKDUJHVPD\YDU\IURPORFDWLRQWRORFDWLRQ&XVWRPHUVDUHDGYLVHGWRYHULI\
EHIRUH
7KHFRQFHUQHGDXWKRUL]HGVHUYLFHFHQWHUZLOODGYLVHWKHFXVWRPHUZKHWKHUWRHIIHFWWKHUHSDLUVDWVLWHRUDWWKHDXWKRUL]HGVHUYLFHFHQWHU
&DOOUHJLVWHUHGZLWKWKHFHQWUDOL]HGKHOSOLQH$XWKRUL]HGVHUYLFHFHQWHUZKHUHLQRQO\VRIWZDUHXSGDWLRQFKDUJHDEOHWRFXVWRPHUFOHDQLQJ
RIWKHXQLWSDUWVDGMXVWPHQWVJHQHUDOH[SODQDWLRQVDUHQRWWREHFRQVLGHUHGDVGHIHFWV
,QFDVHRIUHSDLUVRUUHSODFHPHQWRIDQ\SDUWVRIWKHXQLWWKLVZDUUDQW\ZLOOWKHUHDIWHUFRQWLQXHDQGUHPDLQLQIRUFHRQO\IRUWKHXQH[SLUHGSHULRG
RIWKHZDUUDQW\:KHUHDUHSODFHPHQWLVSURYLGHGWKH3URGXFWRUSDUWUHSODFHGEHFRPHVWKHSURSHUW\RI/*(,//*(,/PD\UHSODFHSDUWVZLWK
UHIXUELVKHGSDUWV5HSODFHPHQWRISDUWVZRXOGEHSXUHO\DWWKHGLVFUHWLRQRI/*(,/DORQH,QFDVHWKHUHSODFHPHQWRIWKHHQWLUHXQLWLVEHLQJ
PDGHWKHVDPHPRGHOVKDOOEHUHSODFHGDQGLQWKHHYHQWVXFKPRGHOKDVEHHQGLVFRQWLQXHGLWVKDOOEHUHSODFHGZLWKWKHPRGHOHTXLYDOHQWDV
GHHPHGE\/*(,/7KHZDUUDQW\RQUHSODFHPHQWPRGHOVKDOOUHPDLQLQIRUFHRQO\IRUWKHXQH[SLUHGSHULRGRIWKHZDUUDQW\EDVHGRQRULJLQDO
SXUFKDVH
,QFDVHRIDQ\GDPDJHWRWKHSURGXFWFXVWRPHUDEXVHUHSDLUVE\XQDXWKRUL]HGSHUVRQQHOPLVXVHGHWHFWHGE\WKH$XWKRUL]HG6HUYLFH
&HQWHUSHUVRQQHOWKHZDUUDQW\ZLOOEHFRQVLGHUHGYRLGDQGVKDOODOVRQRWEHDSSOLFDEOHWRZDUUDQW\WHUPVFRQGLWLRQV$OVRUHSDLUVZLOOEH
GRQHRQFKDUJHDEOHEDVLVRQO\VXEMHFWWRDYDLODELOLW\RISDUWV
7KLVZDUUDQW\VKDOOQRWFRYHUDQ\FRQVHTXHQWLDORUUHVXOWLQJOLDELOLW\GDPDJHRUORVVWRSURSHUW\RUOLIHDULVLQJGLUHFWO\RULQGLUHFWO\RXWRIDQ\
GHIHFWLQWKH/*SURGXFW7KHFRPSDQ\
VREOLJDWLRQXQGHUWKLVZDUUDQW\VKDOOEHOLPLWHGWRUHSDLURUSURYLGLQJUHSODFHPHQWRIGHIHFWLYHSDUWV
RQO\XQGHUWKHZDUUDQW\SHULRG
7KHFRPSDQ\RULWV$XWKRUL]HG6HUYLFH&HQWHUUHVHUYHVWKHULJKWWRUHWDLQDQ\SDUWVRUFRPSRQHQWUHSODFHGDWLWVGLVFUHWLRQLQWKHHYHQWRID
GHIHFWEHLQJQRWLFHGLQWKHHTXLSPHQWGXULQJZDUUDQW\SHULRG
:KLOHWKHFRPSDQ\ZLOOPDNHHYHU\HIIRUWWRFDUU\RXWUHSDLUVDWWKHHDUOLHVWLWKRZHYHULVPDGHH[SUHVVO\FOHDUWKDWWKHFRPSDQ\LVXQGHUQR
REOLJDWLRQWRGRVRLQDVSHFLILHGSHULRGRIWLPH
:DUUDQW\GRHVQRWFRYHUDFFHVVRULHVH[WHUQDOWRWKHHTXLSPHQWVXSSOLHGE\WKHGHDOHU/*DVSURPRWLRQDOVFKHPH
,QHYHQWRIDQ\XQIRUHVHHQFLUFXPVWDQFHVSDUHVQRWEHLQJDYDLODEOHWKHQWKHFRPSDQ\
VSUHYDLOLQJGHSUHFLDWLRQUXOHVZLOOEHELQGLQJRQWKH
SXUFKDVHUWRDFFHSWDVDFRPPHUFLDOVROXWLRQLQOLHXRIUHSDLUV
,IDQ\FRORUHGLQWHUQDORUH[WHUQDOFRPSRQHQWVDUHUHSODFHGWKHUHZLOOEHFRPPLWPHQWWRHQVXUHWKDWWKHVKDGHVPDWFKZLWKWKHRULJLQDORU
RWKHUFRPSRQHQWV7KHUHSODFHGVKDGHVSDWWHUQVWLQWVPD\YDU\IURPWKHFXVWRPHU
VXQLWGXHWRFRQWLQXRXVXVDJHRIWKHXQLW$Q\PDWFKLQJ
FRPSRQHQWVFKDQJHGDWFXVWRPHU
VUHTXHVWZLOOEHRQFKDUJHDEOHEDVLVH[FHSWWKHFRPSRQHQWZKLFKDFWXDOO\QHHGHG
%ULJKWGRWV'DUNGRWVKHUHLQDIWHUUHIHUUHGDV3L[HOVZLWKLQWKHSHUPLVVLEOHOLPLWVKDOOQRWEHWUHDWHGDVGHIHFWDQGZLOOQRWEHFRYHUHGXQGHU
ZDUUDQW\7KHUDQJHRISHUPLVVLEOHOLPLWRI3L[HOVDQ\ZKHUHRQWKHVFUHHQLVEHWZHHQWRGRWVFRXQWHGVHSDUDWHO\IRU%ULJKWDQG'DUNGRWV
HDFKGHSHQGLQJXSRQWKHVFUHHQUHVROXWLRQRIWKHUHVSHFWLYH0RQLWRU
7KHXQLWVKDOOEHRSHUDWHGZLWKYDULDWLRQRIRIUDWHGYROWDJHDW+]$Q\IDLOXUHGXHWRYROWDJHIOXFWXDWLRQEH\RQGVSHFLILHG
WROHUDQFHZLOOQRWEHFRYHUHGXQGHUZDUUDQW\
7KLV:DUUDQW\LVQRWDSSOLFDEOHLQDQ\RIWKHIROORZLQJFDVHV
7KHZDUUDQW\FDUGLVQRWFRPSOHWHGSURSHUO\DWWKHWLPHRISXUFKDVH
7KHFRPSOHWHGZDUUDQW\FDUGLVQRWSUHVHQWHGWRDXWKRUL]HGVHUYLFHSHUVRQQHODWWKHWLPHRIVHUYLFHRIWKHSURGXFW
7KHSURGXFWLVQRWRSHUDWHGDFFRUGLQJWRLQVWUXFWLRQVJLYHQLQWKH2SHUDWLQJ,QVWUXFWLRQ%RRNOHW
'HIHFWVDUHFDXVHGE\LPSURSHURUUHFNOHVVXVHZKLFKVKDOOEHGHWHUPLQHGE\WKHFRPSDQ\SHUVRQQHO
$Q\UHSDLUZRUNLVFDUULHGRXWE\SHUVRQVRWKHUWKDQDXWKRUL]HGVHUYLFHSHUVRQQHO
'HIHFWVDUHFDXVHGE\GXHWRFDXVHVEH\RQGFRQWUROOLNHOLJKWHQLQJDEQRUPDOYROWDJHDFWVRI*RGRUZKLOHLQWUDQVLWWRVHUYLFHFHQWHURU
SXUFKDVHU
VUHVLGHQFH
7KHZDUUDQW\LVQRWYDOLGLQFDVHWKHVHULDOQXPEHULVGHOHWHGGHIHFWHGRUDOWHUHG
7RDQ\GHIHFWVGDPDJHPDOIXQFWLRQRUIDLOXUHUHVXOWLQJIURPDOWHUDWLRQVDFFLGHQWPLVXVHDEXVHILUHOLTXLGVSLOODJHPLVDGMXVWPHQWRI
FXVWRPHUFRQWUROVXVHRQDQLQFRUUHFWYROWDJHSRZHUVXUJHVDQGGLSVWKXQGHUVWRUPDFWLYLW\DFWVRI*RGYROWDJHVXSSO\SUREOHPV
WDPSHULQJRUXQDXWKRUL]HGUHSDLUVE\DQ\SHUVRQVXVHRIGHIHFWLYHRULQFRPSDWLEOHDFFHVVRULHVWKHRSHUDWLRQRIDFRPSXWHUYLUXVRIDQ\NLQG
H[SRVXUHWRDEQRUPDOO\FRUURVLYHFRQGLWLRQVRUHQWU\E\DQ\LQVHFWYHUPLQRUIRUHLJQREMHFWLQWKH3URGXFW
'DPDJHWRWKHSURGXFWRUDQ\SDUWVGXHWRWUDQVSRUWDWLRQRUVKLIWLQJLVQRWFRYHUHGE\ZDUUDQW\
7KLVZDUUDQW\ZLOODXWRPDWLFDOO\WHUPLQDWHRQWKHH[SLU\RIWKHZDUUDQW\SHULRGDVVSHFLILHGDERYHHYHQLI/*SURGXFWPD\QRWEHLQXVHIRUDQ\
WLPHGXULQJWKHZDUUDQW\SHULRGIRUDQ\UHDVRQ
2QO\FRXUWVLQVWDWHRI'HOKLVKDOOKDYHWKHMXULVGLFWLRQIRUVHWWOLQJDQ\FODLPVGLVSXWHVDULVLQJXQGHUWKHZDUUDQW\
&86720(56&23<
02'(/12
6(5,$/12
'$7(2)385&+$6(
&86720(51$0($''5(66
7(/
'($/(51$0($''5(66
7(/
&XVWRPHU¶V6LJQDWXUH
'HDOHU¶V6LJQDWXUH
7KLV&DUGLVYDOLGRQO\LILWLVILOOHGLQDQGVWDPSHGE\RXU$XWKRULVHGGHDOHURQWKHGDWHRISXUFKDVH
&XVWRPHU,QIRUPDWLRQ&HQWHU
)RUDQ\TXHU\UHODWHGWRWKHDIWHUVDOHVVHUYLFH\RXPD\SOHDVHFRQWDFWXVRQWKHQXPEHUVOLVWHGEHORZ
%UDQFK
Ahmedabad
Asansol
$GGUHVV
LGEIL,233-234,Platinum Plaza,Nr. Judges Bunglow cross Road, Bodakdev,
Ahmedabad - 54,
LGEIL,Block-E,Ist Floor, P C Chattarjee Market,Rambandhu Tala,
Aurangabad
GT Road (E) Asansol-713303,
LGEIL,302 CIDCO No 3, Opp Hotel Ramgiri, Jalna Road,Aurangabad - 431003,
Bangalore
LGEIL, No. 914, 2nd Floor, Shri Venkateshwara Complex, Opp. IBP Petrol Bunk,
80ft Road, 6th Block, Koramangala - Banglore - 560095,
Bhopal
LG Electronics India Private Limited,2nd Floor, Alankar Complex, Plot No.10,
M.P. Nagar Zone - II, BHOPAL -PIN 462011,
Bhubaneshwar LGEIL, Plot No.02,1st Flr.,Bapuji Nagar, Bhubaneshwar- 751009,
Calcutta
LGEIL, 1,Ho-Chi-Min-Sarani, 6th Floor, Metro Towers, Calcutta-700071,
Chandigarh
LGEIL, SCO No. 142-143, 3rd Floor, Sector-34A Chandigarh.-160002
Chennai
LGEIL,AA11,2nd Avenue, Fatima Tower, Anna Nagar West, Chennai-600040
Cochin
LGEIL,40/1270, Vasudeva Buildings, T.D. Road ,Ernakulam Cochin-682011
Coimbatore
Delhi
Dehradun
Gurgaon
LGEIL, 250a, Sanganur Main Road, Kannappa Nagar, Coimbatore-641027
LGEIL, A-27,Mohan Co-operative,Industrial Estate,New Delhi
LGEIL, M - 22, Commercial Motors Compound,Mohabewala Indl. Area,
Delhi-Saharanpur Road, Dehradun (Uttarakhand)
LGEIL,II nd Flr, A Block, Centre Point Bldg, Sushant Lok , PH-I, Gurgaon-122001
Ghaziabad
Guwahati
LGEIL, ,J-10, RDC Rajnagar Ghaziabad - 201001
LGEIL, Shantineer Bhawan, C K Aggarwal Path, Chenikurthi, Guwahati-781003
Hyderabad
Hubli
Indore
Jaipur
LGEIL, 1st Floor, Survey No.54, Pulla Reddy Building,
Vikarampuri Main Road Kharkhana,
LGEIL,1 Floor, Above Bellad & Co., Near Bannigida Busstop,
Gokul Road Hubli-580030
LGEIL, 3rdflr.,304 Bansi Trade Centre,581/5 M.G.Road,Indore-452003
LGEIL,B-71,Sahakar Marg, Lal Kothi Scheme, Jaipur-302015
%UDQFK1R
40040013-14
3292009/3292010
Fax No:- 2215170
5625705/ (Fax) 2474055/
32095436/32095437/32095438
41145145/41144750/41144751
4262847/4229861(Fax) 4262848
2531430, 2534280
22883254 (51) Fax
5087389\90 (Fax) 5089107
65510501~04 (Fax) 26203506
2369765,2369743 ,2370744,
4027444,4027555, 2360977(Fax)
2332197 ,2332195
26991412/11/13 (Fax)26991410
2644213/283
4047461- 62 - 63/4272867
4047460 (Fax)
9811354152/3/64/65/266
2663895/2666958/2665983/
2668984- Telefax
27207504,05,06/27204094
27201462(Fax)
4250251/52
4065523~24, 4082157(Fax)
5111118/5113028/5105392
5111540 (Fax)
Jammu
LGEIL, Plot No.-52,Yard No. 6,Transport Nagar, Narwal, Jammu-180006
2477420, 2477419, 2474396,
2474384
Jodhpur
LGEIL,22(1-A)/21(2-B)/2, RIICO Heavy Industrial area, Jodhpur - 342003
2742384,392, 5120030 (Fax)
Karnal
LG ELECTRONICS INDIA PVT LTD,Super Tyre Building, Near New Anaj Mandi, Opp , 2219201, 2219202 (Fax)
New World Restauarnt, G.T road Karnal, Haryana
Lucknow
LGEIL, B- 537,Hari Kunj, Keshav Nagar, Sitapur Road Lukhnow -226020
2757538,39, 2759121 (Fax) 2757559
Ludhiana
LGEIL, Village Jhande, Near Badowal Railway Station, Opp ferozpur Road Ludhiana. 2804412 - 19
Mumbai(N & S) LGEIL, Trade Star, 4th Floor, A Wing, J.B Nagar, Andheri Kurla Road,
28352882-2887, 28352889 (Fax)
Andheri (E) Mumbai-400059
Nagpur
LGEIL, 5a,Road No.13,Behind Msrtc Workshop, MIDC Hinga,Nagpur-440016
235120, 235122,(Fax) 234401
Patna
LGEIL, 2nd Floor, Ankit Chandra Deep Complex, Bander Bageecha,
3298714, 2541845(Fax)
Near Samrat Hotel, Patna- 800001.
Pune
LGEIL, 105/106, Premium Point,GM Road, Opp Modern High School, IIIrd Floor,
Shivaji Marg. Pune -411005
66030100,732/733/734/735
66030740 (Fax)
Rajkot
LGEIL, Sanskruti Apartment, Opp. Dr. Ambedkar Bhawan , Near Atithi Chowk ,
2481499, 2467692(FAX)
Akshar Road , Rajkot - 360004
Raipur
613 to 616 ,6th Floor, Offizo, Magneto - The Mall, GE Road, Raipur-PIn - 492001
4053171/4037470
(Fax) 4038426/10/11
Ranchi
LGEILl,402,Commerce Tower, Opp. Gel Church Complex, Main Road, Ranchi
3294026, 2331815
Surat
LGEIL1001-1004,Ascon Plaza, IInd Flr, Anand Mahal Road, Behind Bhulka Bhavan
2730982/83, 2730984 (Fax)
School, Adajan, Surat-395009
Thane
LGEIL,Gall Shop No - 206,207 , 2nd Floor , Sai Plaza , Above Vijay Sales
25472633/2637, 25472602 (Fax)
Opp. Cine Wonder Mall , Ghodbunder Road , Thane(West)-400607
Varanasi
LGEIL, Pama Complex ,DLW, Lahartara Road, Shivdaspur,
2373432/36/37
Manduadih, Varanasi UP-221002
Vijaywada
LGEIL, Door No 32-2/1-7, Ratnamamba Street, Prajasakti Nagar,
2497283/87, (Fax) 2497284
Vijaywada - 520010, Andhra Pradesh
Warangal
LGEIL, House No. 1-8-598/1 First Floor, Beside Hdfc Bank Nakkalgutta,
2551453
Hanamakonda-506001 (warangal)
Kozhikode
LGEIL, 3/568, Thripuri Building, Wayanadu Road, First Floor, Near K.S.F.E,
2366755, 2366756, 2366678
East Nadakkavu, Calicut-11, Pin-673011
(Fax) 2766678
1RWH$GGUHVVDQGFRQWDFWQR
VDUHVXEMHFWWRFKDQJHZLWKRXWSULRUQRWLFH
(PDLOVHUYLFHLQGLD#OJHFRP
(Toll Free)
SMS
(Send SMS)
www.lg.com
serviceindia@lge.com
5HJG2IILFH$0RKDQ&RRSHUDWLYH,QGXVWULDO(VWDWH
0DWKXUD5RDG1HZ'HOKL
(Only DTV)
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
Download PDF

advertising