LG | 42PW450 | LG 42PW450 Owner’s Manual

User’s Guide Specification
담 당
MJ JEON
10.12.11
1. Model Description
MODEL
50/60PV250-TA
BRAND
LG
Part No.
SUFFIX
2.
AU
관 리 자
EH Hong
10.12.16
JO Kim
10.12.16
MFL62864980
(1101-REV02)
Product Name 50/60PV250
Printing Specification
1. Trim Size (Format) : 185mm x 260 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Uncoated paper , 백상지 60 g/㎡
• Inside : Uncoated paper , 백상지 60 g/㎡
4. Printing Method : Off-set
5. Bindery : Saddle stitch
6. Language : English (1)
7. Number of pages : 20
N
O
T
E
S
3.
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Special Instructions
(1) Origin Notification
* LGEIN : Printed in Indonesia
* LGESP : Printed in Brazil
* LGEND : Printed in China
* LGEMA : Printed in Poland
4.
* LGEWA : Printed in U.K.
* LGEMX : Printed in Mexico
* LGEIL : Printed in India
Changes
10
9
8
7
6
5
4
3
2
01/24/11
Jeon.M.J.
S1-18366
Added the 3D glasses for PZ550 model .
1
01/03/11
Jeon.M.J.
S0-14627
Added the contents of PW350/PZ550 model .
REV.
NO.
MM/DD/YY
SIGNATURE
CHANGE NO.
CHANGE
CONTENTS
P/NO. MFL62864980
Total pages : 20 pages
Pagination sheet
Front
Cover
(EN)
P/NO.
Back
Cover
2
…
…
…
…
19
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
P/NO : MFL62864980 (1101-REV02)
Printed in Korea
www.lg.com
2
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
yy
In this manual, the illustration may be somewhat different from your product because it is
yy
just example to help the instruction.
warning yyIf you ignore the warning message, you may be seriously injured or there is a
possibility of accident or death.
caution yyIf you ignore the caution message, you may be slightly injured or the product may be damaged.
Precaution in Installing the Product
warning
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or
deformation may occur.
Do not use the product in damp place such
as a bathroom or any place where it is likely
to get wet.
- This may cause a fire or could give an
electric shock.
If you can smell smoke or other odours or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
CAUTION
ENGLISH
ENG
Install the product on a flat and stable place
that has no risk of the product dropping.
- If the product is dropped, you may be injured
or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in
installation such as bookcase or rack.
- Ventilation required.
Electrical Power Related
Precautions
warning
Make sure to connect the power cable to a
properly earthed outlet.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered
with dust, dry the power plug completely or wipe
dust off.
- You may be electrocuted due to excess
moisture.
During a thunder or lightning storm, unplug the
power cable or signal cable.
- You may be electrocuted or a fire can break
out.
CAUTION
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
As long as this unit is connected to the AC wall outlet, it is
not disconnected from the AC power source even if you
turn off this unit by SWITCH.
Precautions WHEN Moving the Product
warning
Make sure to turn off the product.
Make sure to remove all cables before
moving the product.
- You may be electrocuted or the product
can be damaged.
CAUTION
Do not impact the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
- If you drop the product, the damaged
product can cause electric shock or fire.
Contact your nearest service center for
repair.
Precautions WHEN Using the Product
warning
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check,
calibration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
efer all servicing to qualified service
R
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-W
hen a fixed image (e.g. logos, screen menus, video game,
computer display or teletext pages) is displayed on the
television for an extended period it can become permanently
imprinted on the screen. This phenomenon is known as “image
burn” or “burn-in”. Image burn is not covered under the
manufacturer’s warranty.
- In order to prevent image burn, avoid displaying a fixed
image on your television’s screen for a prolonged period (2 or
more hours for LCD, 1 or more hours for Plasma).
- Image burn can also occur on the letterboxed areas of
your television if you use the 4:3 aspect ratio setting for an
extended period.
ASSEMBLING AND PREPARING
3
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.
Owner’s manual
Polishing cloth1 (This item is not
included for all models.)
Ferrite core (Depending on model)
(This item is not included for all
models.)
x4
M4 x 26
x4
x3
M5 x 14.5
(Except for 60PV25**,
60PZ55**)
M4 x 28
x3
M5 x 24
(Only 60PV25**,
60PZ55**)
Screw for assembly
Protection cover
Power Cord(This item is not included
for all models.)
Protection cover
tape
Cable Holder
Power Cord holder
3D Glasses
(AG-S250 : Depending on model)
(This item is not included for all
models.)
1 Gently wipe the spots on the cabinet with the polishing cloth.
Caution
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
ENGLISH
ENG
Remote control and batteries(AAA)
4
ASSEMBLING AND PREPARING
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
Image shown may differ from your TV.
yy
How to use the ferrite core (Depending on model)
yy
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
10 mm(+ / - 5 mm)
[to an External device]
[to the TV]
[Cross Section of
Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[Figure 1]
[to a wall plug]
[to the TV]
[Cross Section of
Ferrite Core]
[Figure 2]
ENGLISH
ENG
3 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to the TV]
[to a wall plug]
[Figure 3]
-If there is one ferrite core, follow as shown in Figure 1.
-If there are two ferrite cores, follow as shown in Figures 1 and 2.
-If there are three ferrite cores, follow as shown in Figures 1 and 3.
[Cross Section of
Ferrite Core]
Separate purchase
Separate purchase items can be changed or modified for quality
improvement without any notification.
Contact your dealer for buying these items.
These devices only work with compatible LG Plasma TV.
Parts and buttons
3D Glasses
(AG-S230, AG-S250, AG-S270 :
Only 3D Models)
NOTE
yy
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
yy
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
Caution
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
yy
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
yy
ASSEMBLING AND PREPARING
5
Image shown may differ from your TV.
yy
Only 50/60PV25**, 42/50PT25**
Screen
IN 2 USB IN
USB input
Power indicator
Red – In Standby
mode
Off – TV turns on
VIDEO L/MONO AUDIO R
HDMI IN
AV (Audio and
Video) IN
Remote control and
intelligent1 sensors
AV IN 2
Speakers
HOME
INPUT
VIDEO
Y
R AUDIO L/MONO
1
RGB IN (PC)
2
VIDEO
PR PB
L
COMPONENT IN
1
AUDIO IN
(RGB/DVI)
R
AUDIO
OPTICAL
DIGITAL
AUDIO OUT
ANTENNA
IN
RS-232C IN
(CONTROL & SERVICE)
Connection panel
Description
Turns the power on or off
INPUT
Changes the input source
HOME
Accesses the main menus, or saves your input and exits the menus
OK
Selects the highlighted menu option or confirms an input
-
Touch buttons2
/DVI IN
Button
/I
P
ENGLISH
ENG
AV IN 1
OK
+
vP^
Adjusts the volume level
Scrolls through the saved programmes
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2 Touch Button - You can use the desired button function by touching.
6
ASSEMBLING AND PREPARING
Image shown may differ from your TV.
yy
Only 42/50PW35**, 42/50PW45**, 50/60PZ55**
Screen
IN 3 USB IN
USB input
VIDEO L/MONO AUDIO R
HDMI IN
AV (Audio and
Video) IN
Remote control and intelligent1 sensors
AV IN 2
Power indicator
Red – In Standby
mode
Off – TV turns on
Speakers
HOME
INPUT
VIDEO
OPTICAL
DIGITAL
AUDIO OUT
2
IN
PR PB
R AUDIO L/MONO
ANTENNA
IN
2
1
RGB IN (PC)
RS-232C IN
(CONTROL & SERVICE)
Button
/I
Connection panel
Description
Turns the power on or off
INPUT
Changes the input source
HOME
Accesses the main menus, or saves your input and exits the menus
OK
Selects the highlighted menu option or confirms an input
-
Touch buttons2
AUDIO IN
(RGB/DVI)
L
VIDEO
P
1
R
AUDIO
COMPONENT IN
Y
ENGLISH
ENG
AV IN 1
OK
+
vP^
Adjusts the volume level
Scrolls through the saved programmes
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
2Touch Button - You can use the desired button function by touching.
ASSEMBLING AND PREPARING
Additional information
Viewing the owner’s manual
The owner’s manual in PDF file format is supplied
on the enclosed CD. Install the Adobe Acrobat
Reader to view the owner’s manual on your PC.
1 Insert the supplied CD.
The web page appears automatically.
2Click Owner’s Manual on the web page.
3 View the owner’s manual.
NOTE
If the web page does not appear
automatically, access My computer and then
click LG and index.htm to view the owner’s
manual.
7
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
Caution
Avoid touching the screen at all times, as
yy
this may result in damage on the screen
or some of the pixels used to create
images.
It is recommended to move the TV in the box
yy
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
yy
power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
ENGLISH
ENG
Hold the top and bottom of the TV frame firmly.
yy
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When transporting a large TV, there should be
yy
at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
8
ASSEMBLING AND PREPARING
Setting up the TV
Not using the Desk Type Stand
Image shown may differ from your TV.
yy
Put your TV on a pedestal stand and mount the TV
on a table or wall.
Attaching the stand
1Lay the TV with the screen side down on a flat
surface.
Image shown may differ from your TV.
yy
Push the supplied protection cover into the
yy
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
yy
- This will protect the opening from
accumulating dust and dirt.
- When installing the wall mounting bracket,
use the Protection cover.
Caution
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
Protection
cover tape
2Assemble the parts of the Stand Body with the
Protection cover
Stand Base of the TV.
Mounting on a table
Stand Body
ENGLISH
ENG
Stand Base
Image shown may differ from your TV.
yy
1Lift and tilt the TV into its upright position on a
table.
3Secure the TV and the stand with the 4 screws.
-Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Make sure to assemble the front and rear side
of the stand.
Front
Rear
Caution
yy
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
2Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING
Caution
Caution
yy
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Make sure that children do not climb on
yy
or hang on the TV.
NOTE
NOTE
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your view.
20
9
20
Use a platform or cabinet that is strong
yy
and large enough to support the TV
securely.
Using the Kensington security system
Image shown may differ from your TV.
yy
This feature is not available for all models.
yy
Securing the TV to a wall
Image shown may differ from your TV.
yy
This feature is not available for all models.
yy
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
ENGLISH
ENG
Mounting on a wall
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly
10 cm
10 cm
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
10 cm
10 cm
10
ASSEMBLING AND PREPARING
Separate purchase(Wall Mounting Bracket)
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Model
42/50PT25**
50PV25**
42/50PW35**
42/50PW45**
50PZ55**
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws 4
Wall mount
PSW400B,
bracket
PSW400BG,
DSW400BG
60PV25**
60PZ55**
Tidying cables
Image shown may differ from your TV.
yy
1 Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
600 x 400
M8
4
PSW600B,
PSW600BG
Power Cord Holder
Caution
ENGLISH
ENG
Disconnect the power first, and then
yy
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
yy
may cause damage to the TV and void
your warranty.
Use the screws and wall mount bracket yy
that meet the VESA standard. Any
damages or injuries by misuse or using
an improper accessory are not covered
by the warranty.
NOTE
Use the screws that are listed on the
yy
VESA standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The length of screws may differ
yy
depending on the wall mount. Make sure
to use the proper length.
For more information, refer to the manual
yy
supplied with the wall mount bracket.
2 Gather and bind the cables with the Cable
Holder.
Cable Holder
Caution
Do not move the TV by holding the Cable
yy
Holder & Power Cord Holder, as the
Cable holders may break, and injuries
and damage to the TV may occur.
REMOTE CONTROL
11
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching and ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control toward the remote control sensor
on the TV.
To remove the batteries, perform the installation actions in reverse.
Caution
Do not mix old and new batteries, as this may damage the remote control.
yy
Image shown may differ from your TV.
yy
In Analogue TV and in some countries, some remote control keys may not work.
yy
AV MODE
ENERGY
INPUT
TV/
RAD
SAVING
(POWER)
ENERGY SAVING
Turns the TV on or off.
AV MODE
Selects an AV mode.
Adjusts the brightness of the screen to reduce energy consumption
2
3
INPUT
Changes the input source; Turns the TV on.
4
5
6
TV/RAD
Selects Radio, TV and DTV programme.
7
8
9
Enters numbers.
LIST
0
Number buttons
Q.VIEW
LIST
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
+MARK
Adjusts the volume level.
FAV
Accesses your favourite programme list
RATIO
Resizes an image.
MARK
FAV
P
RATIO
P
A
G
E
MUTE
GUIDE Home
Q.MENU
OK
BACK INFO
3D (Only 3D Models) Used for viewing 3D video.
EXIT
FREEZE
or
ENERGY
AV MODE
INPUT
TV/
RAD
SAVING
1
2
3
4
5
6
7
8
9
0
Q.VIEW
LIST
MARK
FAV
3D
P
MUTE
GUIDE Home
Q.MENU
OK
BACK INFO
EXIT
3D SETTING
P
A
G
E
MUTE
Mutes all sounds.
P
PAGE
Scrolls through the saved programmes.
GUIDE
Shows programme guide.
HOME
Accesses the main menus, or saves your input and exit the menus.
Q. MENU
Accesses the quick menus
Navigation buttons
(up/down/left/right)
OK
Scrolls through menus or options.
BACK
Returns to the previous level.
INFO
Views the information of the current programme the screen.
EXIT
Clears all on-screen displays and return to TV viewing.
Moves to the previous or next screen.
Selects menus or options and confirms your input.
Coloured buttons
These buttons are used for teletext (on TELETEXT models only),
Programme edit.
3D SETTING(Only 3D Use this to view 3D video.
Models)
TELETEXT BUTTONS These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SUBTITLE
Recalls your preferred subtitle in digital mode.
Control buttons
)
(
FREEZE
FREEZE
SIMPLINK
RATIO
Selects a menu or option.
Controls the MY MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
Freezes the current frame while using the TV, AV, Component, RGBPC, or HDMI input source.
Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.
ENGLISH
ENG
1
12
WATCHING TV
WATCHING TV
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language

Mode Setting

Country

Time Zone
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).

Auto Tuning
Selects a language to display.
(Except for Australia, New
Zealand, Singapore, South
Africa),
Selects Home Use for the
Home environment.
Selects a country to display.
(Only Australia, New Zealand)
Selects a Time Zone to
display.(Only Australia)
Scans and saves available
channels automatically.
NOTE
NOTE
ENGLISH
ENG
Use a signal splitter to use more than 2
yy
TVs.
If the image quality is poor, install a signal
yy
amplifier properly to improve the image
quality.
If the image quality is poor with an
yy
antenna connected, aim the antenna to
the correct direction.
An antenna cable and converter are not
yy
supplied.
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
DTV mode control buttons may not
yy
function based on country broadcasting
circumstances. (Only DTV)
In country that Digital broadcasting
yy
regulation isn’t fixed, some DTV function
may not work depending on digital
broadcasting circumstances. (Only DTV)
4When the basic settings are complete,
press OK.
NOTE
yy
If you do not complete the Initial setting, it
will appear whenever the TV turns on.
yy
Disconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
1Connect the power cord to a power outlet.
2 In Standby mode, press
(POWER) to turn the
TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
You can also access Factory Reset by
yy
accessing OPTION in the main menus.
5To turn the TV off, press
(POWER) .
MAKING CONNECTIONS
13
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
Connecting your Unit
yyImage shown may differ from your TV
To connect additional equipment, see the External equipment Setup section in CD Manual.
yy
2
R
1
VIDEO
R AUDIO L/MONO
L
VIDEO
PR PB
L
AUDIO
R
AV IN 2
OPTICAL
DIGITAL
AUDIO OUT
IN 3 USB IN
or
AV IN 2
2
IN
PR PB
1
R AUDIO L/MONO
1
ANTENNA
IN
RGB IN (PC)
ANTENNA
IN
2
L
AUDIO IN
(RGB/DVI)
R
VIDEO
AUDIO
Power Cord
COMPONENT IN
Y
VIDEO
AV IN 1
3
VCR back
ENGLISH
ENG
COMPONENT IN
Y
VIDEO
AV IN 1
VIDEO L/MONO AUDIO R
DVD/STB back
VCR Connection
VIDEO L/MONO AUDIO R
DVD/STB
2
2
RS-232C IN
(CONTROL & SERVICE)
1
Antenna
Connection
14
3D IMAGING
3D Imaging
(Only 42/50PW35**,42/50PW45**, 50/60PZ55**)
3D Technology
This TV can display in 3D via 3D broadcasting or
when the TV is connected to a compatible device,
such as a Blu-ray 3D Player. You need such a
device to watch the TV in 3D. The 3D TV displays
two separate pictures formatted for each eye. The
viewer needs to wear 3D glasses in order to see
these images in 3D format.
WARNING
ENGLISH
ENG
yy
When watching 3D images, you should
maintain a distance of at least twice the
screen width, and you should also be
able to see all of the screen at eye level.
yy
If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.
yy
Watching the TV or playing video games
that incorporate 3D imaging with the 3D glasses for a long period of time can
cause drowsiness, headaches or fatigue
to you and/or your eyes. If you have a
headache, or otherwise feel fatigued or
drowsy, stop watching the TV and have
a rest.
yy
Pregnant woman, seniors, persons with
heart problems or persons who experience frequent drowsiness should refrain
from watching 3D TV.
yy
Some 3D imaging may cause you to
duck or dodge the image displayed in the
video. Therefore, it is best if you do not
watch 3D TV near fragile objects or near
any objects that can be knocked over
easily.
yy
Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.
yy
Warning for photosensitization seizure:
Some viewers may experience a seizure
or epilepsy when exposed to certain factors, including flashing lights or images
in TV or video games. If you or anybody
from your family has a history of epilepsy
or seizure, please consult with your doctor before watching 3D TV.
Also certain symptoms can occur in
unspecified conditions without any previous history. If you experience any of the
following symptoms, immediately stop
watching the 3D imaging and consult a
doctor: dizziness or light-headedness ,
visual transition or altered vision, visual
or facial instability, such as eye or muscle
twitching, unconscious action, convulsion,
loss of conscience, confusion or disorientation, loss of directional sense, cramps,
or nausea. Parents should monitor their
children, including teenagers, for these
symptoms as they may be more sensitive
to the effects of watching 3D TV.
yy
Risk of photosensitization seizure can be
reduced with the following actions.
» Take frequent breaks from watching 3D TV.
» For those who have vision that is different in each eye, they should watch
the TV after taking vision correction
measures.
»W
atch the TV so that your eyes are on
the same level as the 3D screen and
refrain from sitting too closely to the TV.
»D
o not watch the 3D imaging when
tired or sick, and avoid watching the 3D imaging for a long period of time.
»D
o not wear the 3D glasses for any
other purpose than viewing 3D imaging
on a 3D TV. »S
ome viewers may feel disoriented
after watching 3D TV. Therefore, after
you watch 3D TV, take a moment to regain awareness of your situation before
moving.
3D IMAGING
NOTE
When Using 3D Glasses
CAUTION
yy
3D glasses are sold separately. Refer
to the 3D glasses manual for operating
instructions.
yy
Do not use the 3D glasses to replace
your corrective glasses, sunglasses or
protective goggles.
yy
Do not store the 3D glasses in hot or cold
locations.
yy
Do not drop objects onto the 3D glasses.
Do not drop or bend the glasses.
yy
Since the lenses of the 3D glasses are
easily scratched, make sure to clean
only with a soft cloth. Shake off any dust
before using the cloth since the glasses
are easily scratched.
3D Imaging Viewing Range
TV size, viewing angle & other circumstances may
change the viewing distance and the angle of view.
Viewing
Distance
Viewing
Angle
2 m - 10 m
120 º
(When the viewing distance is 2 m)
ENGLISH
ENG
yy
To watch the TV in 3D, you must put on
your 3D glasses. For best results, you
should wear LG Brand 3D glasses. The
3D imaging may not display properly
when using another brand of 3D glasses.
Please see the 3D glasses manual for instructions on how to use the 3D glasses.
yy
After powering on the TV, a few seconds
may be needed for your TV to calibrate.
yy
It may take a moment for you to see the
3D imaging if you look away from the TV
and then revert your eyes back to the 3D program.
yy
If there is an obstacle between the TV
and the 3D glasses, the 3D imaging may
not display properly.
yy
Do not use the TV in close proximity
to other electronic equipments and RF
equipments.
yy
In Analogue TV, 3D Imaging does not
work.
yy
When watching 2D images, it is recommended to take off the 3D glasses. If you
watch 2D images with the 3D glasses on,
you may see distorted images.
15
16
3D IMAGING
Watching 3D images
Image shown may differ from your TV.
yy
Using 3D quick menu option
1 Press 3D SETTING.
2Use the following options while viewing 3D View 3D mode for 3D images
imaging.
1 Play the 3D video or select 3D channel. (2D to 3D mode is available with all contents)
2 Press 3D and select same type in your displayed picture on the screen. (Select type on "3D Video" tab)
3D Video
2D Video
3D Setting
3D Picture Size ◀
▶
3D Viewpoint 0
◀
▶
3D Picture Balance
◀
Off
▶
3D Picture Correction
◀
Left/Right
▶
ENGLISH
ENG
Cancel
OK
ꔅ 3D Setting Turn off 3D Mode.
Cancel
ꔅ 3D setting
View 2D mode for 3D images
1 Play the 3D video or select 3D channel.
2 Press 3D and select same type in your
displayed picture on the screen. (Select type on "2D Video" tab)
3D Video
2D Video
3To turn off the 2D mode, press 3D and select
OK. Turn off 2D Mode.
3D video
OK
Cancel
Image View Mode
●
◀
3D Picture Correction ◀
3D
▶
Left/Right
▶
2D ● 3D Depth 15 ◀
▶
● 3D Viewpoint 0
◀
▶
End 3D video
(Depending on model)
Button
2D mode
OK
3D Setting
OK
4To turn off the 3D mode, press 3D and select
OK.
End 3D video
or
* Notice : Turn on the 3D mode automatically for
HDMI input playing the 3D blueray titles.
Power on your 3D glasses and put them on.
Sit 2 meters from TV to enjoy the best 3D view.
▶
3D Depth 15 ◀
OK
3 Press OK on displayed information window.
Just Scan
Description
Cuts off the outer edges of the
3D Picture Size picture and stretch it to fit the full
screen in 3D mode.
Adjusts the distance between the
object and the background in the
3D Depth
picture to enhance the 3D effect
in 2D to 3D mode.
Brings the picture (including both
the object and background im3D Viewpoint
ages) to the front or back to enhance the 3D effect in 3D mode.
Adjusts the colour and bright3D Picture
ness difference between the right
Balance
and left sides of the picture in 3D mode.
Changes the order of images
3D Picture
in the right and left sides of the
Correction
picture in 3D mode.
Image View
3D or 3D
2D.
Select 2D
Mode
3D IMAGING
17
CAUTION
yy
Some menus may not work while watching the TV in 3D.
yyIf used 3D effect on the 2D source, 3D may not work.
yy
The 3D imaging mode is disabled automatically when switching DTV channe ls, input source.
yy
The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.
yy
3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to
the TV.
yy
For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
yy
3D may not be displayed properly for some PC graphics cards.
ENGLISH
ENG
18
TROUBLESHOOTING
TROUBLESHOOTING
General
Problem
Resolution
Cannot control the TV with the
remote control.
yyCheck the remote control sensor on the product and try again.
yyCheck if there is any obstacle between the product and the remote control.
to ).
yyCheck if the batteries are still working and properly installed ( to ,
yyCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is
produced.
yyCheck if the product is turned on.
yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV
turns on.
yyThe image is muted during the product start up process. This is normal. If the
image does not appear in a few minutes, unplug the TV for 30 seconds and try
again. If the image still does not appear, contact the authorized service centre
in your local area.
Cannot connect external devices.
yyRefer to the “Connection overview” and connect an external device.
The TV turns off suddenly.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings. Refer to the “Sleep Timer”.
yyIf there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
Audio
Problem
Resolution
ENGLISH
ENG
No sound is produced while images yyPress
+ or - button.
are displaying.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
One of the speakers produce
noises or does not produce sound.
yyA change in ambient humidity or temperature may result in an unusual noise
when the product turns on or off.
yyThere is no problem with your product.
Video
Problem
Resolution
An image displays in black and
white or the colour quality is poor.
yyAdjust the colour setting in the Picture menu.
yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
yyCheck if there are local interferences such as an electrical appliance or power
tool.
Lines or streaks appear on images
yyCheck the antenna or aim the antenna to the proper direction.
Afterimages (ghosts) appear when
the product turns off
yyPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen appears extremely dark.
yyAdjust the brightness and contrast in the Picture menu.
“No Signal” appears on the screen.
yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
Black spots appear on the screen.
yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the LCD panel. This is normal.
The display offset is wrong.
yyAdjust the position setting in the Picture menu.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background yyCheck the video cable connections.
of the screen.
Horizontal noises appear or charac- yyAdjust the Phase setting in the Picture menu. ters blur.
Refer to the “SCREEN”.
The reception on some channels
is poor
yyScroll to other channels. There may a problem with the broadcast.
yyThe station signal may be weak. Aim the antenna to the proper direction.
yyCheck if there is local interference such as an electrical appliance or power tool.
OPEN SOURCE LICENSE
19
Open source software notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
ENGLISH
ENG
An extended Owner’s Manual that contains
information on the advanced features of these
LG TV sets is located on the CD- ROM provided
in an electronic version.
To read these files, you will need to use a
Personal Computer (PC) equipped with a CDROM drive.
Re co rd t h e m o d e l n u m b e r a n d s e r i a l
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer when
requiring any service.
(Only DTV)
Model :
Serial No. :
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
Download PDF

advertising