LG | 55LA6200 | LG 47LA6200 Owner’s Manual

Printing specification
Signature
MMM/DD/YYYY
Drawn
Checked
Approved
Sanghee.park
Gowoon.lee
Jongok.kim
Jan/04/2013
Jan/04/2013
Jan/04/2013
1. Model Description
Model name
:
LA6400-TA
Brand name
:
LG
Part number
2nd, 3rd Suffix
:
AU/TR
Product name
:
LA6400-TA
(Revision number)
:
MFL67706422
(1301-REV00)
2. Printing Specification
:
182 mm x 257 mm (B5)
• Cover
:
1 Color (Black)
• Inside
:
1 Color (Black)
• Cover
:
Uncoated, wood-free paper 60 g/㎡
• Inside
:
Uncoated, wood-free paper 60 g/㎡
4. Printing method
:
Off set
5. Bindery
:
Saddle stitching
6. Language
:
Eng (1)
7. Number of pages
:
48
1. Trim size (Format)
2. Printing colors
3. Stock (Paper)
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
O
T
E
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK :
Printed in Kazakhstan
LGEKR :
Printed in Korea
LGERS :
Printed in Mexico
LGEAZ
:
Printed in Brazil
LGEMA :
Printed in Poland
LGESY :
Printed in China
LGEEG :
Printed in Egypt
LGEMX :
Printed in Mexico
LGETH :
Printed in Thailand
LGEIL
:
Printed in India
LGEND :
Printed in China
LGEVN :
Printed in Vietnam
LGEIN
:
Printed in Indonesia
LGERA :
Printed in Russia
LGEWR :
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number
MMM/DD/YYYY Signature
ECO Number
Change Contents
Part number
Pagination sheet
Total pages
Front
MFL67706422
:
48 pages
(1301-REV00)
Back
(Eng)
P/No.
:
(Revision number)
2
…
44
Blank
Blank
Blank
OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LA62**
LA64**
LA66**
LA69**
LA74**
LN57**
P/NO : MFL67706422 (1301-REV00)
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
SAFETY INSTRUCTIONS
8
Viewing 3D Imaging (Only 3D models)
9
INSTALLATION PROCEDURE
9
ASSEMBLING AND PREPARING
9
13
14
15
16
16
18
21
22
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
23
MAKING CONNECTIONS
23
24
24
25
25
26
26
26
27
27
Antenna connection
HDMI connection
DVI to HDMI connection
Component connection
Composite connection
Audio connection
- Digital optical audio connection
Headphone connection
USB connection
MHL connection
28
REMOTE CONTROL
30
MAGIC REMOTE CONTROL
FUNCTIONS
31
31
31
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
32
USING THE USER GUIDE
33
MAINTENANCE
33
33
33
Cleaning your TV
- Screen, frame, cabinet and stand
Power cord
34
TROUBLESHOOTING
35
ENVIRONMENTAL INFORMATION
35
WEEE
36
SPECIFICATIONS
45
LICENSES
45
OPEN SOURCE SOFTWARE NOTICE
45
EXTERNAL CONTROL DEVICE
SETUP
WARNING
y If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
y If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
y The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y Do not place the TV and
remote control in the following
environments:
- A location exposed to
direct sunlight
- An area with high humidity
such as a bathroom
- Near any heat source
such as stoves and other
devices that produce heat
- Near kitchen counters or
humidifiers where they can
easily be exposed to steam
or oil
- An area exposed to rain or
wind
- Near containers of water
such as vases
Otherwise, this may result in
fire, electric shock, malfunction
or product deformation.
y Do not place the product
where it might be exposed to
dust.
This may cause a fire hazard.
y Mains plug is the
disconnecting device. The
plug must remain readily
operable.
y Do not touch the power plug
with wet hands. Additionally, if
the cord pin is wet or covered
with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due
to excess moisture.
y Make sure to connect the
power cable to the grounded
current. (Except for devices
which are not grounded.)
You may be electrocuted or
injured.
3
y Insert the power cable
completely into wall socket.
If the power cable is not
inserted completely into wall
socket, a fire could break out.
y Ensure the power cord does
not come into contact with
hot objects such as a heater.
This may cause a fire or an
electric shock hazard.
y Do not place a heavy object,
or the product itself, on power
cables.
Otherwise, this may result in
fire or electric shock.
y Bend antenna cable between
inside and outside building to
prevent rain from flowing in.
This may cause water
damaged inside the Product
and could give an electric
shock.
y When mounting a TV on the
wall, make sure not to install
TV by hanging power and
signal cables on the back of
the TV.
It may cause fire, electric
shock.
y Do not plug too many
electrical devices into a single
multiple electrical outlet.
Otherwise, this may result in
fire due to over-heating.
y Do not drop the product or let
it fall over when connecting
external devices.
Otherwise, this may result
in injury or damage to the
product.
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
Des
icca
nt
y Keep the packing antimoisture material or vinyl
packing out of the reach of
children.
Anti-moisture material is
harmful if swallowed. If
swallowed by mistake, force
the patient to vomit and
visit the nearest hospital.
Additionally, vinyl packing
can cause suffocation. Keep
it out of the reach of children.
y Do not spray water on the
product or scrub with an
inflammable substance
(thinner or benzene). Fire or
electric shock accident can
occur.
y Do not let your children climb
or cling onto the TV.
Otherwise, the TV may
fall over, which may cause
serious injury.
y Never touch this product or
antenna during a thunder or
lighting storm.
You may be electrocuted.
y Dispose of used batteries
carefully to protect a child
from eating them.
Please seek Doctor- Medical
Attention immediately if child
consumes batteries.
y Do not insert any metal
objects/conductors (like
a metal chopstick/cutlery/
screwdriver) between power
cable plug and input Wall
Socket while it is connected
to the input terminal on the
wall. Additionally, do not
touch the power cable right
after plugging into the wall
input terminal.
You may be electrocuted.
(Depending on model)
y Do not put or store
inflammable substances near
the product.
There is a danger of
combustion/explosion or fire
due to careless handling of
the inflammable substances.
y Do not drop metallic objects
such as coins, hair pins,
chopsticks or wire into the
product, or inflammable
objects such as paper and
matches. Children must pay
particular attention.
Electrical shock, fire or injury
can occur. If a foreign object
is dropped into the product,
unplug the power cord and
contact the service centre.
y Do not allow any impact,
shock or any objects to fall
into the unit, and do not drop
anything onto the screen.
You may be injured or the
product can be damaged.
y Never touch the wall outlet
when there is leakage of
gas, open the windows and
ventilate.
It may cause a fire or a burn
by a spark.
y Do not disassemble, repair
or modify the product at your
own discretion.
Fire or electric shock accident
can occur.
Contact the service centre for
check, calibration or repair.
y If any of the following
occur, unplug the product
immediately and contact your
local service centre.
- The product has been
impacted by shock
- The product has been
damaged
- Foreign objects have
entered the product
- The product produced
smoke or a strange smell
This may result in fire or
electric shock.
SAFETY INSTRUCTIONS
y Apparatus shall not be
exposed to dripping or
splashing and no objects
filled with liquids, such as
vases, shall be placed on the
apparatus.
CAUTION
y Install the product where no
radio wave occurs.
y There should be enough
distance between an outside
antenna and power lines
to keep the former from
touching the latter even when
the antenna falls.
This may cause an electric
shock.
y Do not install the product
on places such as unstable
shelves or inclined surfaces.
Also avoid places where
there is vibration or where
the product cannot be fully
supported.
Otherwise, the product may
fall or flip over, which may
cause injury or damage to the
product.
y If you install the TV on a
stand, you need to take
actions to prevent the product
from overturning. Otherwise,
the product may fall over,
which may cause injury.
y If you intend to mount the product to a wall,
attach VESA standard mounting interface
(optional parts) to the back of the product. When
you install the set to use the wall mounting
bracket (optional parts), fix it carefully so as not
to drop.
y Only use the attachments / accessories specified
by the manufacturer.
y When installing the antenna,
consult with a qualified
service technician.
If not installed by a qualified
technician, this may create
a fire hazard or an electric
shock hazard.
y We recommend that you
maintain a distance of at least
2 to 7 times the diagonal
screen size when watching
TV.
If you watch TV for a long
period of time, this may
cause blurred vision.
y Only use the specified type of
battery.
This could cause damage to
the remote control.
y Do not mix new batteries with
old batteries.
This may cause the batteries
to overheat and leak.
y Batteries should not be exposed to excessive
heat.eg keep away from direct Sunlight , open
fireplace and electric heaters.
y Do not place non-rechargeable batteries in
charging device.
y Make sure there are no
objects between the remote
control and its sensor.
y Signal from the remote
control may be disturbed by
sun light or other strong light.
In this case, darken the room.
y When connecting external
devices such as video game
consoles, make sure the
connecting cables are long
enough.
Otherwise, the product may
fall over, which may cause
injury or damage the product.
y Do not turn the product
On/Off by plugging-in or
unplugging the power plug to
the wall outlet. (Do not use
the power plug for switch.)
It may cause mechanical
failure or could give an
electric shock.
ENGLISH
ENG
y If you don’t intend to use
the product for a long time,
unplug the power cable from
the product.
Covering dust can cause a
fire, or insulation deterioration
can cause electric leakage,
electric shock or fire.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
y Please follow the installation
instructions below to prevent
the product from overheating.
- The distance between the
product and the wall should
be more than 10 cm.
- Do not install the product in
a place with no ventilation
(e.g., on a bookshelf or in
a cupboard).
- Do not install the product
on a carpet or cushion.
- Make sure the air vent is
not blocked by a tablecloth
or curtain.
Otherwise, this may result in
fire.
y Take care not to touch the
ventilation openings when
watching the TV for long
periods as the ventilation
openings may become hot.
This does not affect the
operation or performance of
the product.
y Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
y Prevent dust collecting on the
power plug pins or outlet.
This may cause a fire hazard.
y Protect the power cord from
physical or mechanical
abuse, such as being twisted,
kinked, pinched, closed in a
door, or walked upon. Pay
particular attention to plugs,
wall outlets, and the point
where the cord exits the
appliance.
y Do not press strongly upon
the panel with a hand or
sharp object such as nail,
pencil or pen, or make a
scratch on it.
y Avoid touching the screen or
holding your finger(s) against
it for long periods of time.
Doing so may produce some
temporary distortion effects
on the screen.
y When cleaning the product
and its components, unplug
the power first and wipe it
with a soft cloth. Applying
excessive force may cause
scratches or discolouration.
Do not spray with water or
wipe with a wet cloth. Never
use glass cleaner, car or
industrial shiner, abrasives
or wax, benzene, alcohol
etc., which can damage the
product and its panel.
Otherwise, this may result in
fire, electric shock or product
damage (deformation,
corrosion or breakage).
y As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
y When unplugging the cable,
grab the plug and unplug it,
by pulling at the plug.
Don’t pull at the cord to
unplug the power cord from
the power board, as this
could be hazardous.
y When moving the product,
make sure you turn the
power off first. Then, unplug
the power cables, antenna
cables and all connecting
cables.
The TV set or power cord
may be damaged, which may
create a fire hazard or cause
electric shock.
y When moving or unpacking
the product, work in pairs
because the product is heavy.
Otherwise, this may result in
injury.
SAFETY INSTRUCTIONS
y Refer all servicing to
qualified service personnel.
Servicing is required when
the apparatus has been
damaged in any way, such
as power supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed
to rain or moisture, does not
operate normally, or has been
dropped.
y If the product feels cold to the
touch, there may be a small
“flicker” when it is turned
on. This is normal, there is
nothing wrong with product.
y The panel is a high
technology display product
with resolution of two million
to six million pixels. You
may see tiny black dots and/
or brightly coloured dots
(red, blue or green) at a
size of 1 ppm on the panel.
This does not indicate a
malfunction and does not
affect the performance and
reliability of the product.
This phenomenon also
occurs in third-party products
and is not subject to
exchange or refund.
y You may find different
brightness and colour of the
panel depending on your
viewing position(left/right/top/
down).
This phenomenon occurs due
to the characteristic of the
panel. It is not related with
the product performance, and
it is not malfunction.
ENGLISH
ENG
y Contact the service center
once a year to clean the
internal parts of the product.
Accumulated dust can cause
mechanical failure.
7
y Displaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from a
video game) for a prolonged time may cause
damage to the screen, resulting in retention of
the image, which is known as image sticking. The
warranty does not cover the product for image
sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period (2
or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for
a long time, image sticking may occur on the
borders of the panel.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
y Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated
by plastic thermal contraction due to temperature and humidity. This noise is common for
products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed
switching circuit, which supplies a large amount
of current to operate a product. It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D
models)
WARNING
Viewing Environment
y Viewing Time
- When watching 3D contents, take 5 - 15 minute
breaks every hour. Viewing 3D contents for
a long period of time may cause headache,
dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
y Some users may experience a seizure or other
abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
y Do not watch 3D videos if you feel nausea, are
pregnant and/ or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure disease,
etc.
y 3D Contents are not recommended to those who
suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be
experienced.
y If you have strabismus (cross-eyed), amblyopia (weak
eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double
images. It is advised to take frequent breaks than the
average adult.
y If your eyesight varies between your right and left
eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
y Do not watch 3D contents when you feel fatigue from
lack of sleep, overwork or drinking.
y When these symptoms are experienced, stop using/
watching 3D contents and get enough rest until the
symptom subsides.
- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness,
discomfort, double image, visual inconvenience
or fatigue.
CAUTION
Viewing Environment
y Viewing Distance
- Maintain a distance of at least twice the screen
diagonal length when watching 3D contents.
If you feel discomfort in viewing 3D contents,
move further away from the TV.
Viewing Age
y Infants/Children
- Usage/ Viewing 3D contents for children under
the age of 5 are prohibited.
- Children under the age of 10 may overreact
and become overly excited because their vision
is in development (for example: trying to touch
the screen or trying to jump into it. Special
monitoring and extra attention is required for
children watching 3D contents.
- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D
image.
y Teenagers
- Teenagers under the age of 19 may react with
sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching
3D contens for a long time when they are tired.
y Elderly
- The elderly may perceive less 3D effect
compared to the youth. Do not sit closer to the
TV than the recommended distance.
Cautions when using the 3D glasses
y Make sure to use LG 3D glasses. Otherwise, you
may not be able to view 3D videos properly.
y Do not use 3D glasses instead of your normal
glasses, sunglasses or protective goggles.
y Using modified 3D glasses may cause eye strain or
image distortion.
y Do not keep your 3D glasses in extremely high or low
temperatures. It will cause deformation.
y The 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of cloth
when wiping the lenses. Do not scratch the lenses of
the 3D glasses with sharp objects or clean/wipe them
with chemicals.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are using.
New features may be added to this TV in the future.
The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned
off if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,
and this will reduce the overall running cost.
y
y
y
y
y
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
y Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y The items supplied with your product may vary depending on the model.
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product
functions.
y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm
width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your
TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ENGLISH
ENG
NOTE
9
10 ASSEMBLING AND PREPARING
ENGLISH
ENG
ENERGY AV MODE INPUT
TV
ENERGY AV MODE INPUT
SAVING
TV
1
2
3
4
5
7
8
9
0
FLASHBK
SAVING
1
2
4
5
6
7
8
9
3
6
LIST
0
MARK
FLASHBK
FAV
LIST
VOL
MARK
3D
CH
P
A
G
E
FAV
VOL
3D
CH
MUTE
P
A
G
E
MENU INFO
MUTE
MENU INFO
Q.MENU
Tag On
Q.MENU
ENTER
P
ENTER
BACK
EXIT
L/R SELECT
BACK
EXIT
FREEZE
L/R SELECT
RATIO
FREEZE
RATIO
Remote control,
batteries (AAA)
(Depending on model)
(See p. 28, 29)
Magic remote control,
batteries (AA)
(Only LA620*, LA621*,
LA64**, LA66**, LA69**,
LA74**, LN570*, LN572*)
(Depending on model)
(See p. 30)
Owner’s manual
Tag on
(Depending on model)
Cinema 3D Glasses
The number of 3D glasses
may differ depending on
the model or country.
Dual play glasses
(Depending on model)
Cable holder
(Depending on model)
(See p. 22)
Power Cord
(Depending on model)
Desk-mount Screw
(1EA : Only
32/42/47/50/60LN570*,
32/42/47/50/60LN572*)
(2EA : Only
32/42/47/50LA62**,
32/42/47/50LA64**,
32/42/47/50LA66**,
32/42/47/50LN571*)
(See p. 18)
Desk-mount Cable
2EA
(Only 32/42/47/50LA62**,
32/42/47/50LA64**,
32/42/47/50LA66**,
32/42/47/50LN571*)
(See p. 18)
Bracket Screw
2EA, M4 x 8
(Only 32/42LA62**,
32/42LA64**,
32/42LA66**,
32/42LN571*)
(See p. 18)
Bracket Screw
2EA, P4 x 8
(Only 47/50LA62**,
47/50LA64**,
47/50LA66**,
47/50LN571*)
(See p. 18)
or
Stand Screws
8EA, M4 x 14
(Only LA62**, LA64**,
LA66**, LN571*)
(See p. 16)
Stand Screws
4EA, M4 x 20
(Only LA69**, LA74**)
(See p. 17)
Stand Screws
3EA, P5 x 25
4EA, M4 x 14
(Only LN570*, LN572*)
(See p. 17)
Isolator
(Only LA66**, LA69**, LA74**)
(See p. 12)
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Wall mount inner
spacers
4EA
(Only LA64**)
(See p. 22)
Stand Body / Stand
Base
(Only LN570*, LN572*)
(See p. 17)
Blu-Ray
(Only LA6980)
Stand Body / Stand
Base
(Only LA62**, LA64**,
LA66**, LN571*)
(See p. 16)
Stand Base
(Only LA69**, LA74**)
(See p. 17)
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y Antenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be
heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is
recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid
disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through
other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable,
may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be
provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN
60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
**(Only for LA66**, LA69**, LA74** Series)
ASSEMBLING AND PREPARING
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
P
AG-F2**DP, AG-F3**DP
Dual play glasses
AG-F2**, AG-F3**, AG-F4**
Cinema 3D glasses
AN-MR400
Magic remote
AN-VC***
Video call camera
LG Audio device
Tag On
Tag on
Compatibility
LN57**
LA62**, LA64**, LA66**, LA69**, LA74**
AG-F2**DP, AG-F3**DP
Dual play glasses
•
AG-F2**, AG-F3**, AG-F4**
Cinema 3D glasses
•
AN-MR400
Magic remote
•
•
AN-VC***
Video call camera
•
•
LG Audio device
•
•
Tag on
•
•
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ENGLISH
ENG
Separate purchase
13
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
B type : LA69**, 42/47/55LA74**
A type : LA62**, LA64**, LA66**, LN571*
Buttons
Screen
Buttons
Screen
OK
OK
SETTINGS
SETTINGS
INPUT
INPUT
Speakers
Speakers
Remote control sensor
LG Logo light (Only LA64**, LA66**)
Power Indicator (Only LA62**)
C type : 60LA74**
Remote control sensor
LG Logo light
D type : LN570*, LN572*
Buttons
Screen
Screen
Buttons
OK
OK
SETTINGS
SETTINGS
INPUT
INPUT
Speakers
Speakers
USB IN
Remote control sensor
Power Indicator
3 USB Appps
Remote control sensor
LG Logo light
Button
Description
H
Scrolls through
the saved programmes.
HAdjusts
OK
Selects the highlighted menu option or confirms an input.
H
INPUT
4(PC) 1 HDD IN 2 USB Hub
Accesses the main menu, or saves your input and exits the menus.
SETTINGS
S
H
the volume level.
Changes the input source.
USB IN
IN
NOTE
3
Turns the power on or off.
Logo light to on or off by selecting OPTION in the main menus.
y You can set theAVLG COMPONENT
IN
LAN
(PC)
RGB IN
(RGB/HDMI-PC)
AUDIO
IN/OUT
(RGB)
AV1
AUDIO
PR
PB
1(ARC) 2
IN
VIDEO
Y
IN
13/18V
700mA MAx
LNB IN
Satellite
ANTENNA
/CABLE
OUT
OPTICAL
DIGITAL
AUDIO
H/P
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
y When transporting a large TV, there should be at
least 2 people.
y When transporting the TV by hand, hold the TV as
shown in the following illustration.
CAUTION
y Avoid touching the screen at all times, as this may
result in damage to the screen.
y It is recommended to move the TV in the box or
packing material that the TV originally came in.
y Before moving or lifting the TV, disconnect the power
cord and all cables.
y When holding the TV, the screen should face away
from you to avoid damage.
y Hold the top and bottom of the TV frame firmly. Make
sure not to hold the transparent part, speaker, or
speaker grill area.
y When transporting the TV, do not expose the TV to
jolts or excessive vibration.
y When transporting the TV, keep the TV upright, never
turn the TV on its side or tilt towards the left or right.
ENGLISH
ENG
Lifting and moving the TV
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
LA62**, LA64**, LA66**, LN571*
1
3
M4 x 14
4 EA
(Only LA62**, LN571*)
Stand Body
Front
Stand Base
2
(Only LA62**, LN571*)
M4 x 14
4 EA
(Only LA64**, LA66**)
(Only LA64**, LA66**)
M4 x 14
4 EA
ASSEMBLING AND PREPARING
P5 x 25
1
1
3EA
Stand Body
Front
Stand Base
2
Stand Base
2
3
3
M4 x 20
4EA
M4 x 14
4EA
ENGLISH
ENG
LN570*, LN572*
LA69**, LA74**
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a table
CAUTION
y When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
y Make sure that the screws are fastened
completely. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
Do not fasten the screws with too much force;
otherwise they may be worn out and get loosened.
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
(Only 32/42/47/50/60LN570*, 32/42/47/50/60LN572*)
NOTE
y Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
(Only 32/42/47/50LA62**, 32/42/47/50LA64**,
32/42/47/50LA66**, 32/42/47/50LN571*)
Mounting on a table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.

10 cm
m
10 c
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
M4 x 8, 2EA
(Only 32/42LA62**, 32/42LA64**,
32/42LA66**, 32/42LN571*)
P4 x 8, 2EA
(Only 47/50LA62**, 47/50LA64**,
47/50LA66**, 47/50LN571*)
ASSEMBLING AND PREPARING
(Only 32/42/47/50LA62**, 32/42/47/50LA64**,
32/42/47/50LA66**, 32/42/47/50LN571*)
How to fix the TV to a table
1 Connect the Desk-mount Cables to the Stand Base
using the Bracket Screws.
2 Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3 Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Swivel 15 degrees to the left or right and adjust the angle
of the TV to suit your view.
(Only LA62**, LA64**, LA66**, LN571*)
15
15
WARNING
y To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
Swivel 10 degrees to the left or right and adjust the angle
of the TV to suit your view.
(Only 42/47LA69**, 42/47LA74**)
10
10
Swivel 8 degrees to the left or right and adjust the angle
of the TV to suit your view.
(Only 55LA69**, 55/60LA74**)
8
8
CAUTION
y When adjusting the angle adof the product, watch
out for your fingers.
» Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
(Only LA62**, LA64**, LA66**, LN571*)
<Rear>
<Front>
ENGLISH
ENG
NOTE
19
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
1
2
3
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
Connect the eye-bolts and wall brackets tightly with a
sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
y Make sure that children do not climb on or hang
on the TV.
NOTE
y Use a platform or cabinet that is strong and large
enough to support the TV securely.
y Brackets, bolts and ropes are not provided. You
can obtain additional accessories from your local
dealer.
WARNING
y If a television is not positioned in a sufficiently
stable location, it can be potentially hazardous
due to falling. Many injuries, particularly to
children, can be avoided by taking simple
precautions such as:
» Using cabinets or stands recommended by the
manufacturer of the television.
» Only using furniture that can safely support the
television.
» Ensuring the television is not overhanging the
edge of the supporting furniture.
» Not placing the television on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television
to a suitable support.
» Not standing the televisions on cloth or other
materials placed between the television and
supporting furniture.
» Educating children about the dangers of
climbing on furniture to reach the television or
its controls.
ASSEMBLING AND PREPARING
(This feature is not available for all models.)
The Kensington security system connector is located at
the rear of the TV. For more information of installation and
using, refer to the manual provided with the Kensington
security system or visit http://www.kensington.com.
Make sure to use screws and wall mount bracket that
meet the VESA standard. Standard dimensions for the
wall mount kits are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
32LA62**
32LN57**
VESA (A x B)
Standard screw
Number of screws
200 x 100
M4
4
Model
47/50/55/60LA62**
42/47/50/55LA64**
42/47/50/55LA66**
42/47/55LA69**
42/47/55/60LA74**
47/50/55/60LN57**
400 x 400
M6
4
Connect the Kensington security system cable between
the TV and a table.
VESA (A x B)
Standard screw
Number of screws
Mounting on a wall
Attach an optional wall mount bracket at the rear of the
TV carefully and install the wall mount bracket on a solid
wall perpendicular to the floor. When you attach the
TV to other building materials, please contact qualified
personnel.
LG recommends that wall mounting be performed by a
qualified professional installer.
10 cm
10 cm
10 cm
10 cm
42LA62**
32LA64**
32LA66**
42LN57**
200 x 200
M6
4
ENGLISH
ENG
Using the Kensington security system
21
22 ASSEMBLING AND PREPARING
ENGLISH
ENG
CAUTION
y Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorised LG wall mount and contact the
local dealer or qualified personnel.
y Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer’s warranty.
Tidying cables
1 Gather and bind the cables with the Cable Holder
and the Cable Management.
2 Attach the cable management to TV.
⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ
(Only LA62**, LA64**, LA66**, LN571*)
Cable Holder
NOTE
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation manual
and necessary parts.
y The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied
with the wall mount.
y When attaching a third-party wall mounting
bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to move
your TV in vertical angle. Please make sure not
to use the spacers for LG wall mounting bracket.
(Only LA64**)
Cable Management
(Only LA69**, LA74**)
Cable Holder
Cable Management
Gather and bind the cables with the Cable Holder.
(Only LN570*, LN572*)
Cable Holder
Wall Mount Inner Spacer
CAUTION
y Do not move the TV by holding the cable holders,
as the cable holders may break, and injuries and
damage to the TV may occur.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the LA64** models.
Antenna connection
Connect the TV to a wall antenna socket with an RF
cable (75 Ω).
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
ANTENNA/
CABLE IN
NOTE
y The external device connection may differ from
the model.
y Connect external devices to the TV regardless of
the order of the TV port.
y If you record a TV programme on a DVD recorder
or VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
y Refer to the external equipment’s manual for
operating instructions.
y If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
y In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture is
clear.
y In PC mode, some resolution settings may not
work properly depending on the graphics card.
NOTE
y Use a signal splitter to use more than 2 TVs.
y If the image quality is poor, install a signal
amplifier properly to improve the image quality.
y If the image quality is poor with an antenna
connected, try to realign the antenna in the correct
direction.
y An antenna cable and converter are not supplied.
y Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
ENGLISH
ENG
MAKING CONNECTIONS
23
24 MAKING CONNECTIONS
DVI to HDMI connection
Transmits the digital video and audio signals from an
external device to the TV. Connect the external device
and the TV with the HDMI cable as shown.
Transmits the digital video signal from an external device
to the TV. Connect the external device and the TV with
the DVI-HDMI cable as shown. To transmit an audio
signal, connect an audio cable.
Choose any HDMI input port to connect. It does not
matter which port you use.
RED
WHITE
(*Not Provided)
1 (ARC)
L / MONO
2
/DVI IN
/DVI IN
2
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
3 (MHL)
3 (MHL)
Choose any HDMI input port to connect. It does not
matter which port you use.
1 (ARC)
ENGLISH
ENG
HDMI connection
(*Not Provided)
HDMI
NOTE
y It is recommended to use the TV with the HDMI
connection for the best image quality.
y Use the latest High Speed HDMI™ Cable with
CEC (Customer Electronics Control) function.
y High Speed HDMI™ Cables are tested to carry an
HD signal up to 1080p and higher.
y Supported HDMI Audio format : Dolby Digital,
PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176
k/192k, DTS supported.)
ARC (Audio Return Channel)
y An external audio device that supports SIMPLINK
and ARC must be connected using HDMI/DVI IN
1 (ARC) port.
y When connected with a high-speed HDMI cable,
the external audio device that supports ARC
outputs optical SPDIF without additional optical
audio cable and supports the SIMPLINK function.
AUDIO OUT
DVI OUT
DVD/ Blu-Ray / HD Cable Box / PC
NOTE
y Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
MAKING CONNECTIONS
25
Composite connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external device
and the TV with a component cable as shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external device
and the TV with the composite cable as shown.
/ AV IN
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
AUDIO
VIDEO
L (MONO) AUDIO R
DVD/ Blu-Ray / HD Cable Box
DVD/ Blu-Ray / HD Cable Box / VCR
NOTE
y If cables are not installed correctly, it could cause
this image to display in black and white or with
distorted colours.
RED
WHITE
YELLOW
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
L / MONO
COMPONENT IN
/ AV IN
COMPONENT IN
L / MONO
ENGLISH
ENG
Component connection
26 MAKING CONNECTIONS
ENGLISH
ENG
Audio connection
Headphone connection
You may use an optional external audio system instead
of the built-in speaker.
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown on the
following illustration.
Digital optical audio connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and the TV
with the optical audio cable as shown.
OUT
(*Not Provided)
OUT
OPTICAL
DIGITAL
AUDIO
NOTE
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
NOTE
y Do not look into the optical output port. Looking at
the laser beam may damage your vision.
y Audio with ACP (Audio Copy Protection) function
may block digital audio output.
y AUDIO menu items are disabled when connecting
a headphone.
y When changing AV MODE with a headphone
connected, the change is applied to video but not
to audio.
y Optical Digital Audio Out is not available when
connecting a headphone.
y Headphone impedance: 16 Ω
y Max audio output of headphone: 9 mW to 15 mW
y Headphone jack size: 0.35 cm
MAKING CONNECTIONS
Connect a USB storage device such as a USB flash
memory, external hard drive, or a USB memory card
reader to the TV and access the Smart Share menu to
use various multimedia files.
Mobile High-definition Link (MHL) is an interface for
transmitting digital audiovisual signals from mobile
phones to television sets.
3
3 (MHL)
MHL connection
/DVI IN
2
USB
1
HDD IN
USB IN
HUB
HDD
(*Not Provided)
MHL passive cable
(*Not Provided)
NOTE
y Some USB Hubs may not work. If a USB device
connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
y Connect the external power source if your USB is
needed.
Mobile phone
NOTE
y Connect the mobile phone to the HDMI/DVI IN 3
(MHL) port to view the phone screen on the TV.
y The MHL passive cable is needed to connect the
TV and a mobile phone.
y This only works for the MHL-enabled phone.
y Some applications can be operated by the remote
control.
y For some mobile phones supporting MHL, you can
control with the magic remote control.
y Remove the MHL passive cable from the TV when:
» the MHL function is disabled.
» your mobile device is fully charged in standby
mode.
ENGLISH
ENG
USB connection
27
28 REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
(Depending on model)
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
and
CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
y In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(Only LA62**, LA64**, LA66**, LA69**, LA74**)
(POWER)
Turns the TV on or off.
OK
Selects menus or options and confirms your input.
(User Guide)
Sees user- guide.
BACK
Returns to the previous level.
RATIO
Resizes an image.
RATIO
GUIDE
Shows programme guide.
INPUT
TV/
RAD
INPUT
Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
Number buttons
Enters numbers.
LIST
Accesses the saved programme list.
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Q.VIEW
Returns to the previously viewed programme.
EXIT
Clears on-screen displays and return to TV viewing.
1 Colour buttons
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
2 TELETEXT BUTTONS
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital mode.
FAV
P
A
G
E
Adjusts the volume level.
MUTE
FAV
Accesses your favourite programme list.
INFO
3D
Used for viewing 3D video.
MY APPS
OK
MUTE
Mutes all sounds.
ꕍPꕌ
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
INFO
Views the information of the current
programme and screen.
SMART
Accesses the Smart Home menus.
MY APPS
Shows the list of Apps.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
BACK
GUIDE
EXIT
1
2
Q. MENU
Accesses the quick menus.
LIVE TV
Return to LIVE TV.
)
Control buttons (
Controls the Premium contents, Time Machine or
Smart Share menus or the SIMPLINK compatible
devices (USB or SIMPLINK or Time Machine).
REC
Start to record and display record menu.
SETTINGS
Accesses the main menus.
SUBTITLE
TEXT
T.OPT
Q.MENU
AV MODE
Selects an AV mode.
REC
SIMPLINK
Accesses the AV devices connected with the HDMI
cable through HDMI-CEC.
Opens the SIMPLINK menu.
LIVE TV
SETTINGS
AV MODE
REMOTE CONTROL
29
ENGLISH
ENG
(Only LN57**)
(POWER)
Turns the TV on or off.
OK
Selects menus or options and confirms your input.
(User Guide)
Sees user- guide.
BACK
Returns to the previous level.
RATIO
Resizes an image.
RATIO
GUIDE
Shows programme guide.
INPUT
INPUT
Changes the input source.
TV/
RAD
TV/RAD
Selects Radio, TV and DTV programme.
1
2
3
Number buttons
Enters numbers.
4
5
6
7
8
9
LIST
0
Q.VIEW
LIST
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
P
A
G
E
MUTE
INFO
SETTINGS
Accesses the main menus.
MUTE
Mutes all sounds.
MY APPS
OK
MY APPS
Shows the list of Apps.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
BACK
GUIDE
EXIT
)
Control buttons (
Controls the Premium contents, Time Machine or
Smart Share menus or the SIMPLINK compatible
devices (USB or SIMPLINK or Time Machine).
REC
Start to record and display record menu.
AV MODE
Selects an AV mode.
1
2
Q. MENU
Accesses the quick menus.
LIVE TV
Return to LIVE TV.
ꕍPꕌ
Scrolls through the saved programmes.
SMART
Accesses the Smart Home menus.
2 TELETEXT BUTTONS
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital mode.
SETTINGS
FAV
Accesses your favourite programme list.
INFO
Views the information of the current
programme and screen.
1 Colour buttons
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
FAV
Adjusts the volume level.
PAGE
Moves to the previous or next screen.
EXIT
Clears on-screen displays and return to TV viewing.
SUBTITLE
TEXT
T.OPT
Q.MENU
LIVE TV
REC
AV MODE
SIMPLINK
Accesses the AV devices connected with the HDMI
cable through HDMI-CEC.
Opens the SIMPLINK menu.
30 MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
MAGIC REMOTE CONTROL FUNCTIONS
This item is not included for all models.
When the message “Magic Remote Control battery is low. Change the battery.” is displayed,
replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and
ends to the label inside the compartment, and close the battery cover. Be sure to point
the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
y In Analogue TV and some countries, some remote control buttons may not work.
(Only LA620*, LA621*, LA64**, LA66**, LA69**, LA74**, LN570*, LN572*)
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
SMART
Accesses the Smart Home menu.
BACK
Returns to the previous level.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
Voice recognition
(Depending on model)
3D
Used for viewing 3D video.
(Depending on model)
P
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
MUTE
Mutes all sounds.
Wheel(OK)
Selects menus or options and
confirms your input. Scrolls through
the saved programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the magic remote control works as
a regular remote control. To display
the pointer again, shake the magic
remote control from side to side.
/Q.MENU
Accesses the quick menus.
Accesses the Universal Control.
Voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed)
and the environment (noise and TV volume).
1 Press the Voice recognition button.
2 Speak when the voice display window appears on the left of the TV screen.
• The voice recognition may fail when you speak too fast or too slow.
• Use the Magic remote control no further than 10 cm from your face.
MAGIC REMOTE CONTROL FUNCTIONS
11-1 Brief Info Title Test...
Info.
It is necessary to ‘pair’ (register) the magic remote control
to your TV before it will work.
BACK
HOME
How
to register
the Magic Remote Control
P
MY APPS
1 To register automatically, turn the
TV on and press the Wheel(OK)
button. When registration is
completed, the completion
message appears on the screen.
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK and
SMART buttons together for 5
seconds to reset, then register it
by following “How to register the
Magic Remote Control” above.
2 To re-register the Magic Remote
Control, press and hold the
BACK button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the Magic Remote Control
slightly to left or right. Then, it
will automatically appear on the
screen.
» If the pointer has not been used
for a certain period of time, it will
disappear.
2 You can move the pointer by
aiming the Pointer Receiver of the
Magic Remote Control at your TV
then move it left, right, up or down.
» If the pointer does not work
properly, leave the Magic
Remote Control for 10 seconds
then use it again.
More
1
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Shows information about the current programme
and screen.
2
You can select More Menu.
Precautions to Take when Using
the Magic Remote Control
y Use the Magic Remote Control within the maximum
communication distance (10 m). Using the Magic
Remote Control beyond this distance, or with an
object obstructing it, may cause a communication
failure.
y A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth (2.4
GHz) as the Magic Remote Control.
y The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavy impact.
y Take care not to bump into nearby furniture or
other people when using the Magic Remote
Control.
y Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
y It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic Remote
Control may not perform as expected due to
frequency interference.
ENGLISH
ENG
Registering Magic Remote
Control
31
32 USING THE USER GUIDE
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the SMART button to access the Smart home
menu.
2 Select User Guide and press Wheel(OK).
OPTION > To set language
1
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
Try Now
2
Close
Index
Online User Guide
User Guide

User Guide
NOTE
y You can also access the User Guide by pressing
(User Guide) in the remote control.
User Guide
3
1
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
OPTION
To set country
LG SMART Function
Disabled Assistance
Advanced Function
Information
To set language
2
To set Magic remote control
Online User Guide
Index
4
5
1
Shows the current watching programme or input
source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
4
Allows to browse the description of the function
you want from the index.
5
Provides the detailed information on the functions
of LG Smart TV when the Internet is connected.
(It may not be available depending on the country/
language.)
1
Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2
Moves to the selected menu directly from the User
Guide.
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to
prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then
wipe immediately with a dry cloth.
CAUTION
y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches
and image distortions.
y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
ENGLISH
ENG
MAINTENANCE
33
TROUBLESHOOTING 34
TROUBLESHOOTING
ENGLISH
Problem
Solution
Cannot control
the TV with the
remote control.
y Check the remote control sensor on the product and try again.
y Check if there is any obstacle between the product and the remote control.
to , to ).
y Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
y Check if the product is turned on.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
y Check the power control settings. The power supply may be interrupted.
y Check if the Auto sleep feature is activated in the Time settings.
y If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting
to the PC (RGB/
HDMI DVI),
‘No signal’ or
‘Invalid Format’ is
displayed.
y
y
y
y
Turn the TV off/on using the remote control.
Reconnect the RGB/HDMI cable.
Restart the PC with the TV on.
Try to change the PC resolution.
Audio
Problem
Resolution
No sound is produced while images yyPress
+ or - button.
are displaying.
yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
yyCheck if the TV Speaker feature is activated in the menu option.
No output from one of the speakers
yyAdjust Balance in the menu option.
Unusual sound from inside the TV
is produced.
yyA change in ambient humidity or temperature may result in an unusual noise
when the product turns on or off. There is no problem with your product.
Video
Problem
Resolution
An image displays in black and
white or the colour quality is poor.
yyAdjust the colour setting in the menu option.
yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears
or images blur
yyCheck if there is local interference such as an electrical appliance or power
tool.
Lines or streaks appear on images
yyCheck the antenna or aim the antenna to the correct direction.
Afterimages (ghosts) appear when
the product turns off
yyPixels may have been damaged from a fixed image displayed for a long time
(image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen appears extremely dark.
yyAdjust the brightness and contrast in the menu option.
“No Signal” appears on the screen.
yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
Black spots appear on the screen.
yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the panel.
This is normal.
The display offset is wrong.
yyAdjust the position setting in the menu option.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background yyCheck the video cable connections.
of the screen.
Horizontal noises appear or charac- yyAdjust the Phase setting in the menu option.
ters blur.
Refer to the “SCREEN”.
The reception on some channels
is poor
yyScroll to other channels. There may a problem with the broadcast.
yyThe station signal may be weak. Aim the antenna to the correct direction.
yyCheck if there is local interference such as an electrical appliance or power
tool.
35 ENVIRONMENTAL INFORMATION
ENGLISH
ENG
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
(Only LA620*, LA621*, LA64**, LA66**, LA69**, LA74**, LN570*, LN572*)
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
Output Power
(Max.)
802.11a: 11 dBm
802.11b: 14 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth module (BM-LDS401) specification
Standard
Bluetooth Version 3.0
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.)
10 dBm or lower
y Because band channel used by the country could be different, the user can not change or adjust the operating
frequency and this product is set for the regional frequency table.
(Only LA623*, LN571*)
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
Output Power
(Max.)
802.11a: 11 dBm
802.11b: 14 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
y Because band channel used by the country could be different, the user can not change or adjust the operating
frequency and this product is set for the regional frequency table.
36
37 SPECIFICATIONS
Dimensions
(W x H x D)
Weight
With stand (mm)
47LA6200-TA
47LA6210-TD
47LA6230-TB
47LA620Y-TA
47LA621Y-TD
47LA623Y-TB
733.0 x 499.0 x 242.0
964.0 x 631.0 x 294.0
1076.0 x 695.0 x 327.0
733.0 x 444.0 x 78.0
964.0 x 573.0 x 78.0
1076.0 x 637.0 x 79.4
With stand (kg)
7.9
11.8
15.6
Without stand (kg)
6.7
10.0
13.1
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Weight
47LA62**
Without stand(mm)
Power requirement
Dimensions
(W x H x D)
42LA62**
42LA6200-TA
42LA6210-TD
42LA6230-TB
42LA620Y-TA
42LA621Y-TD
42LA623Y-TB
With stand (mm)
50LA62**
55LA62**
60LA62**
50LA6200-TA
50LA6210-TD
50LA6230-TB
50LA620Y-TA
50LA621Y-TD
50LA623Y-TB
55LA6200-TA
55LA6210-TD
55LA6230-TB
55LA620Y-TA
55LA621Y-TD
55LA623Y-TB
60LA6200-TA
60LA6210-TD
60LA6230-TB
60LA620Y-TA
60LA621Y-TD
60LA623Y-TB
1131.0 x 725.0 x 327.0
1246.0 x 803.0 x 343.0
1355.0 x 865.0 x 343.0
Without stand(mm)
1131.0 x 667.0 x 80.9
1246.0 x 732.0 x 77.2
1355.0 x 793.0 x 65.3
With stand (kg)
17.0
21.5
25.9
Without stand (kg)
14.5
18.7
23.1
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LA64**
42LA64**
47LA64**
MODELS
32LA6400-TA
32LA640Y-TA
42LA6400-TA
42LA640Y-TA
47LA6400-TA
47LA640Y-TA
743.0 x 518.0 x 241.0
973.0 x 652.0 x 294.0
1086.0 x 711.0 x 327.0
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand(mm)
743.0 x 461.0 x 36.4
973.0 x 591.0 x 36.3
1086.0 x 654.0 x 36.3
With stand (kg)
9.2
14.2
17.5
Without stand (kg)
8.0
12.4
15.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
50LA64**
55LA64**
50LA6400-TA
50LA640Y-TA
55LA6400-TA
55LA640Y-TA
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
1137.0 x 732.0 x 327.0
1260.0 x 821.0 x 343.0
Without stand(mm)
1137.0 x 677.0 x 37.2
1260.0 x 753.0 x 36.3
With stand (kg)
19.2
24.2
Without stand (kg)
16.7
21.5
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
ENG
MODELS
32LA62**
32LA6200-TA
32LA6210-TD
32LA6230-TB
32LA620Y-TA
32LA621Y-TD
32LA623Y-TB
ENGLISH
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
SPECIFICATIONS
ENGLISH
ENG
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
725.0 x 501.0 x 241.0
957.0 x 635.0 x 294.0
1069.0 x 695.0 x 327.0
725.0 x 443.0 x 37.1
957.0 x 574.0 x 35.0
1069.0 x 637.0 x 35.0
14.3
17.2
Without stand (kg)
7.5
12.4
14.7
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
50LA66**
55LA66**
50LA6600-TA
50LA6610-TB
50LA6620-TD
50LA660Y-TA
50LA661Y-TB
50LA662Y-TD
55LA6600-TA
55LA6610-TB
55LA6620-TD
55LA660Y-TA
55LA661Y-TB
55LA662Y-TD
With stand (mm)
1129.0 x 730.0 x 326.0
1238.0 x 802.0 x 343.0
Without stand(mm)
1129.0 x 672.0 x 37.2
1238.0 x 733.0 x 35.2
With stand (kg)
19.8
22.7
Without stand (kg)
17.3
20.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
42LA69**
47LA69**
55LA69**
42LA6980-TA
42LA6910-TB
42LA698Y-TA
42LA691Y-TB
47LA6980-TA
47LA6910-TB
47LA698Y-TA
47LA691Y-TB
55LA6980-TA
55LA6910-TB
55LA698Y-TA
55LA691Y-TB
With stand (mm)
951.0 x 634.0 x 269.0
1063.0 x 697.0 x 269.0
1233.0 x 793.0 x 316.0
Without stand(mm)
951.0 x 564.0 x 34.5
1063.0 x 627.0 x 34.5
1233.0 x 723.0 x 34.7
With stand (kg)
14.3
16.7
22.8
Without stand (kg)
12.2
14.6
20.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Weight
47LA6600-TA
47LA6610-TB
47LA6620-TD
47LA660Y-TA
47LA661Y-TB
47LA662Y-TD
8.7
Power requirement
Dimensions
(W x H x D)
47LA66**
42LA6600-TA
42LA6610-TB
42LA6620-TD
42LA660Y-TA
42LA661Y-TB
42LA662Y-TD
With stand (kg)
MODELS
Weight
42LA66**
32LA6600-TA
32LA6610-TB
32LA6620-TD
32LA660Y-TA
32LA661Y-TB
32LA662Y-TD
Without stand(mm)
Power requirement
Dimensions
(W x H x D)
32LA66**
Power requirement
38
39 SPECIFICATIONS
55LA74**
55LA7400-TC
55LA740Y-TC
Dimensions
(W x H x D)
With stand (mm)
951.0 x 634.0 x 269.0
1063.0 x 697.0 x 269.0
1233.0 x 793.0 x 316.0
Without stand(mm)
951.0 x 564.0 x 34.5
1063.0 x 627.0 x 34.5
1233.0 x 723.0 x 34.7
Weight
With stand (kg)
14.3
16.7
22.8
Without stand (kg)
12.2
14.6
20.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
32LN570*
32LN572*
42LN570*
42LN572*
47LN570*
47LN572*
32LN5700-TB
32LN570B-TB
32LN5720-TH
32LN572B-TH
32LN570Y-TB
32LN570Z-TB
32LN572Y-TH
32LN572Z-TH
42LN5700-TB
42LN570B-TB
42LN5720-TH
42LN572B-TH
42LN570Y-TB
42LN570Z-TB
42LN572Y-TH
42LN572Z-TH
47LN5700-TB
47LN570B-TB
47LN5720-TH
47LN572B-TH
47LN570Y-TB
47LN570Z-TB
47LN572Y-TH
47LN572Z-TH
Power requirement
60LA74**
60LA7400-TA
60LA740Y-TA
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
1352.0 x 848.0 x 316.0
Without stand(mm)
1352.0 x 794.0 x 59.9
With stand (kg)
27.6
Without stand (kg)
24.8
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
738.0 x 497.0 x 207.0
968.0 x 629.0 x 236.0
1080.0 x 694.0 x 264.0
Without stand(mm)
738.0 x 449.0 x 79.0
968.0 x 579.0 x 79.0
1080.0 x 642.0 x 80.5
With stand (kg)
7.0
10.7
14.5
Without stand (kg)
6.4
9.6
13.1
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
50LN570*
50LN572*
55LN570*
55LN572*
60LN570*
60LN572*
50LN5700-TB
50LN570B-TB
50LN5720-TH
50LN572B-TH
50LN570Y-TB
50LN570Z-TB
50LN572Y-TH
50LN572Z-TH
55LN5700-TB
55LN570B-TB
55LN5720-TH
55LN572B-TH
55LN570Y-TB
55LN570Z-TB
55LN572Y-TH
55LN572Z-TH
60LN5700-TB
60LN570B-TB
60LN5720-TH
60LN572B-TH
60LN570Y-TB
60LN570Z-TB
60LN572Y-TH
60LN572Z-TH
With stand (mm)
1136.0 x 727.0 x 264.0
1250.0 x 790.0 x 297.0
1359.0 x 852.0 x 297.0
Without stand(mm)
1136.0 x 673.0 x 82.1
1250.0 x 737.0 x 79.1
1359.0 x 799.0 x 67.2
With stand (kg)
15.6
21.2
26.3
Without stand (kg)
14.2
19.1
24.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
ENG
47LA74**
47LA7400-TC
47LA740Y-TC
ENGLISH
42LA74**
42LA7400-TC
42LA740Y-TC
MODELS
SPECIFICATIONS
ENGLISH
ENG
MODELS
Dimensions
(W x H x D)
Weight
47LN571*
47LN5710-TE
47LN571B-TE
47LN571Y-TE
With stand (mm)
738.0 x 502.0 x 242.0
968.0 x 637.0 x 294.0
1080.0 x 701.0 x 327.0
738.0 x 449.0 x 79.0
968.0 x 579.0 x 79.0
1080.0 x 642.0 x 80.5
With stand (kg)
7.6
11.4
15.6
Without stand (kg)
7.0
9.6
13.1
MODELS
Weight
42LN571*
42LN5710-TE
42LN571B-TE
42LN571Y-TE
Without stand(mm)
Power requirement
Dimensions
(W x H x D)
32LN571*
32LN5710-TE
32LN571B-TE
32LN571Y-TE
With stand (mm)
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
50LN571*
55LN571*
60LN571*
50LN5710-TE
50LN571B-TE
50LN571Y-TE
55LN5710-TE
55LN571B-TE
55LN571Y-TE
60LN5710-TE
60LN571B-TE
60LN571Y-TE
1136.0 x 745.0 x 327.0
1250.0 x 804.0 x 343.0
1359.0 x 865.0 x 343.0
Without stand(mm)
1136.0 x 673.0 x 82.1
1250.0 x 737.0 x 79.1
1359.0 x 799.0 x 67.2
With stand (kg)
16.8
21.9
27.0
Without stand (kg)
14.2
19.1
24.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
40
41 SPECIFICATIONS
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
New Zealand,
Singapore
Australia
Indonesia, Israel,
Myanmar, Sri Lanka
Vietnam, Malaysia
Iran, Algeria,
Tunisia, Digital
model
Analogue model,
India, Thailand,
South Africa --
Digital TV
Analogue TV
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
Programme Coverage
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
Television System
DVB-T
PAL B/B
Programme Coverage
VHF 06 to 12,
UHF 27 to 69
B/B : VHF/UHF 0 to 75, CATV : 2 to 44
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
VHF 6 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
DVB-T
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
External Antenna
Impedance
75 Ω
75 Ω
ENG
Operating Temperature
ENGLISH
Environment
condition
SPECIFICATIONS
ENG
ENGLISH
HDMI/DVI-DTV supported mode
Resolution
Component port connecting information
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
640x480
31.469
31.5
59.94
60
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
1920x1080
42
Component ports on the TV
Y
PB
PR
Video output ports on DVD
player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
HDMI/DVI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
60.053
1152x864
54.348
1360x768
47.712
60.015
1280x1024
63.981
60.020
1920x1080
67.50
60.00
(Except for 32LN57**)
NOTE
y To use the TV as secondary monitor with PC/Laptop connected
through HDMI cable, it is recommended to select input label as PC.
43 SPECIFICATIONS
3D supported mode automatically
Input
Signal
640 X 480
480p
576p
720p
HDMI
1080i
1080p
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
59.94 / 60
62.938 / 63
31.25
62.5
50
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Field Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo), JPS(Photo)
NOTE
y For Auto-Detection of 3D, HDMI Cable Version should be above 1.4
ENG
y Video, which is input as below media contents is switched into the 3D screen automatically.
ENGLISH
3D supported mode
SPECIFICATIONS
44
ENG
ENGLISH
3D supported mode manually
Signal
Input
Resolution
Horizontal
Frequency
(kHz)
Verticla
Frequency (Hz)
DTV
HD / SD
-
-
ATV(CVBS/SCART)
SD
-
-
Component
HD / SD
-
-
1024X768
48.36
1360X768
47.71
60
HDMI-PC
1920X1080
67.5
Others
-
480P
31.5
60
576P
31.25
50
37.5
50
720p
1080i
HDMI-DTV
USB, DLNA
(Photo)
Miracast/Widi
45
60
28.12
50
33.75
60
2D to 3D, Side by Side(Half), Top &
Bottom
2D to 3D, Side by Side(Half), Top &
Bottom, Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
2D to 3D, Side by Side(Half), Top &
Bottom
2D to 3D, Side by Side(Half), Top &
Bottom, Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
2D to 3D, Side by Sied(Half), Top &
Bottom
27
24
28.12
25
33.75
30
56.25
50
67.5
60
Under 704x480
-
-
2D to 3D
Over 704x480
interlaced
-
-
2D to 3D, Side by Side(Half), Top &
Bottom
1080p
USB ,DLNA
(Movie)
-
Playable 3D video format
2D to 3D, Side by Side(Half), Top &
Bottom,Checker Board, Row
Interleaving, Column Interleaving
2D to 3D, Side by Side(Half), Top &
Bottom, Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
Over 704x480
progressive
-
50 / 60
2D to 3D, Side by Side(Half), Top &
Bottom,Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
Over 704x480
progressive
-
others
2D to 3D, Side by Side(Half), Top &
Bottom,Checker Board, Row
Interleaving, Column Interleaving
Under 320x240
-
-
2D to 3D
2D to 3D, Side by Side(Half), Top &
Bottom
Over 320x240
-
-
1024X768p
-
30 / 60
1280x720p
-
30 / 60
1920X1080p
-
30 / 60
Others
-
-
2D to 3D, Side by Side(Half), Top &
Bottom
2D to 3D
45
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol
together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is
valid for three (3) years from the date on which you purchased the product.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
ENG
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
ENGLISH
LICENSES
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
(Only DTV)
Download PDF