LG | 65LA9700 | LG 55LA9700 Owner’s Manual

OWNER’S MANUAL
*
LED TV
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LA79**
LA86**
LA96**
LA97**
LA98**
P/NO : MFL67706412 (131 0 -REV1 0 )
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
Safety Instructions
37
MAINTENANCE
8
Viewing 3D Imaging (Only 3D models)
9
Installation Procedure
37
37
37
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
9
ASSEMBLING AND PREPARING
37
TROUBLESHOOTING
9
13
14
16
17
17
20
21
23
24
24
25
25
25
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
Using Sliding Speaker
Using Built-in Camera
- Preparing Built-in Camera
- Name of Parts of Built-in Camera
- Checking the Camera’s Shooting
Range
38
Environmental Information
38
WEEE
39
SPECIFICATIONS
46
Licenses
46
OPEN SOURCE SOFTWARE
NOTICE
46
26
MAKING CONNECTIONS
EXTERNAl CONTROL DEVICE
SETUP
26
27
27
28
28
29
29
29
30
30
Antenna connection
HDMI connection
Headphone connection
DVI to HDMI connection
Component connection
Composite connection
Audio connection
- Digital optical audio connection
USB connection
MHL connection
31REMOTE CONTROL
33
Magic Remote Control
Functions
35
35
35
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the
Magic Remote Control
36Using the User guide
WARNING
y y If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
y y If you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
y y The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y yDo not place the TV and/or remote control
in the following environments:
- -A location exposed to direct sunlight
- -An area with high humidity such as a
bathroom
- -Near any heat source such as stoves
and other devices that produce heat
- -Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
- -An area exposed to rain or wind
- -Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
y yDo not place the product where it might be
exposed to dust.
This may cause a fire hazard.
y yMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
y yDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
y yMake sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which
are not grounded on earth.) Otherwise
possibility you may be electrocuted or
injured.
y yInsert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
y yEnsure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
y yDo not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or electric
shock.
y yBend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside the
Product and could give an electric shock.
y yWhen mounting TV onto wall make sure to
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.
y yDo not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
ENGLISH
ENG
Safety Instructions
3
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
y yDo not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
y yKeep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
y yDo not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service centre.
y yDo not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric shock
accident can occur.
Desic
cant
y yDo not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
y yDispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
y yDo not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
electrocuted. (Depending on model)
y yDo not put or store inflammable
substances near the product. There is a
danger of combustion/explosion or fire due
to careless handling of the inflammable
substances.
y yDo not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
y yNever touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.
y yNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
y yDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
SAFETY INSTRUCTIONS
y yUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
y yApparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
CAUTION
y yInstall the product where no radio wave
occurs.
y yThere should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
y yDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
y yIf you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.
y yIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
y yOnly use the attachments / accessories
specified by the manufacturer.
y yWhen installing the antenna, consult with a
qualified service technician. If not installed
by a qualified technician, this may create
a fire hazard or an electric shock hazard.
y yWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
y yOnly use the specified type of battery.
This could cause damage to the remote
control.
y yDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
y yBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
y yDo not place non-rechargeable batteries
in charging device.
y yMake sure there are no objects between
the remote control and its sensor.
ENGLISH
ENG
y yIf any of the following occur, unplug the
product immediately and contact your
local service centre.
- -The product has been impacted by
shock
- -The product has been damaged
- -Foreign objects have entered the
product
- -The product produced smoke or a
strange smell
This may result in fire or electric shock.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
y ySignal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.
y yWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
y yDo not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
y yPlease follow the installation instructions
below to prevent the product from
overheating.
- -The distance between the product and
the wall should be more than 10 cm.
- -Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
- -Do not install the product on a carpet or
cushion.
- -Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
y yTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
y yPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
y yPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
y yProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
y yDo not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
y yAvoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
y yWhen cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
y yAs long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
SAFETY INSTRUCTIONS
y yWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
y yWhen moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
y yContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
y yRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
y yIf the product feels cold to the touch, there
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.
y yThe panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
y yYou may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
y yDisplaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting
in retention of the image, which is known
as image sticking. The warranty does not
cover the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours
for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
y yGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
ENGLISH
ENG
y yWhen unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D
models)
WARNING
Viewing Environment
y y Viewing Time
- - When watching 3D contents, take 5 15 minute breaks every hour. Viewing
3D contents for a long period of time
may cause headache, dizziness,
fatigue or eye strain.
Those that have a photosensitive
seizure or chronic illness
y y Some users may experience a seizure or
other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
y y Do not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or
blood pressure disease, etc.
y y 3D Contents are not recommended to
those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.
y y If you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
y y If your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation
or refraining from watching 3D contents
y y Do not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
y y When these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- - Consult your doctor when the
symptoms persist. Symptoms may
include headache, eyeball pain,
dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience or fatigue.
CAUTION
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching
3D contents. If you feel discomfort in
viewing 3D contents, move further away
from the TV.
Viewing Age
y y Infants/Children
- - Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- - Children under the age of 10 may
overreact and become overly excited
because their vision is in development
(for example: trying to touch the
screen or trying to jump into it. Special
monitoring and extra attention is
required for children watching 3D
contents.
- - Children have greater binocular
disparity of 3D presentations than adults
because the distance between the eyes
is shorter than one of adults. Therefore
they will perceive more stereoscopic
depth compared to adults for the same
3D image.
y y Teenagers
- - Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them
to refrain from watching 3D contens for
a long time when they are tired.
y y Elderly
- - The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise,
you may not be able to view 3D videos
properly.
� Do not use 3D glasses instead of your
normal glasses, sunglasses or protective
goggles.
� Using modified 3D glasses may cause eye
strain or image distortion.
� Do not keep your 3D glasses in extremely
high or low temperatures. It will cause
deformation.
� The 3D glasses are fragile and are easy
to be scratched. Always use a soft, clean
piece of cloth when wiping the lenses. Do
not scratch the lenses of the 3D glasses
with sharp objects or clean/wipe them with
chemicals.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
9
y y Image shown may differ from your TV.
y y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y y The available menus and options may differ from the input source or product model that you
are using.
y y New features may be added to this TV in the future.
y y The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
y y The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
Installation Procedure
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y y Do not use any unapproved items to ensure the safety and product life span.
y y Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
y y Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y y The items supplied with your product may vary depending on the model.
y y Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
y y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ENGLISH
ENG
NOTE
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENERGY AV MODE INPUT
ENERGY AV MODE INPUT
TV
TV
SAVING
SAVING
1
2
3
4
5
6
7
8
9
0
FLASHBK
LIST
1
9
0
FLASHBK
3D
CH
P
A
G
E
VOL
MARK
3D
CH
P
A
G
E
MUTE
Q.MENU
MENU INFO
Q.MENU
P
ENTER
BACK
6
FAV
FAV
MUTE
MENU INFO
3
5
8
LIST
MARK
VOL
2
4
7
ENTER
EXIT
or
L/R SELECT
FREEZE
RATIO
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control,
batteries (AAA)
The remote control
will not be included
for all sales market.
(Depending on model)
(See p. 31, 32)
Magic remote
control, batteries
(AA)
(Depending on model)
(See p. 33, 34)
Owner’s manual
Power Cord
(Depending on model)
Dual play glasses
(Depending on model)
Cinema 3D Glasses
The number of 3D
glasses may differ
depending on the
model or country.
Component video
cable
(See p. 28)
Composite video
cable
(See p. 28, 29)
Cable holder
(Depending on
model)
(See p. 23)
Cable Management
2EA
(Only LA79**)
(See p. 23)
Tag On
Tag on
(Depending on model)
or
Isolator
(Depending on model)
(See p. 12)
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Stand Screws
8EA, M4 x L14
(Only LA79**)
4EA, M4 x L14
(Only LA965*,
55LA97**)
(See p. 17, 18)
Stand Screws
4EA, M4 x L16
(Only LA86**)
(See p. 17)
Stand Screws
4EA, M4 x L20
(Only LA960*,
LA98**)
(See p. 17, 19)
Stand Screws
6EA, M5 x L16
(Only LA98**)
(See p. 19)
Stand Base/ Stand
Body
(Only LA79**)
(See p. 17)
Stand Base
(Only LA86**,
LA960*)
(See p. 17)
Stand Base
(Only LA97**)
(See p. 18)
Stand Base/ Stand
Body
(Only LA98**)
(See p. 19)
Stand Base
(Only LA965*)
(See p. 18)
Wall mount inner
spacers
4EA
(Only LA97**)
(See p. 22)
Wall mount screws
4EA, M6 x L54
(Only 55LA97**)
(See p. 22)
Wall mount screws
4EA, M8 x L44
(Only 65LA97**)
(See p. 22)
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
Video call camera
(Only 70LA86**)
NOTE
y y Antenna Isolator Installation Guide
- - Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.
» » If there is a voltage difference between TV Set and GND of antenna signal, the antenna
contact might be heated and excessive heat might cause an accident.
- - You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- - Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a
cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
13
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
P
AG-F***DP
Dual play glasses
AG-F***
Cinema 3D glasses
AN-MR400
Magic remote
Tag On
AN-VC5**
Video call camera
Compatibility
LG Audio device
Tag on
LA79**, LA965*, LA98**
LA86**
LA960*, LA97**
AG-F***DP
Dual play glasses
•
•
•
AG-F***
Cinema 3D glasses
•
•
•
AN-MR400
Magic remote
•
•
•
AN-VC5**
Video call camera
•
•
(Depending on
model)
LG Audio device
•
•
•
Tag on
•
•
•
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ENGLISH
ENG
Separate purchase
14
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
Buttons
Screen
A type : LA79**
OK
SETTINGS
INPUT
Speakers
Remote control sensor
LG Logo light
Screen
Built-in Camera
(Only 42/47/55/60LA86**, Buttons
LA960*)
B type : LA86**, LA960*
OK
SETTINGS
INPUT
Speakers
Remote control sensor
LG Logo light
Buttons
Screen
C type : LA965*
OK
SETTINGS
Speakers
INPUT
Remote control sensor
Power Indicator
ASSEMBLING AND PREPARING
Buttons
Built-in Camera
ENGLISH
ENG
Screen
15
D type : LA97**
OK
SETTINGS
INPUT
Speakers
Remote control sensor
Power Indicator
Buttons
Screen
E type : LA98**
OK
SETTINGS
INPUT
Speakers
LG Logo light
Remote control and
Intelligent1 sensors
Button
Description
Scrolls through
the saved programmes.
H
Adjusts
the volume level.
H
H
S
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
H
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
CAUTION
y y To avoid possible SPEAKER damage or
degradation in performance please keep
contact of TV/Speaker out of reach of
Children. (Only LA965*)
NOTE
y y You can set the LG Logo light to on or off
by selecting OPTION in the main menus.
(Depending on model)
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
y y When transporting a large TV, there should
be at least 2 people.
y y When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
y y Avoid touching the screen at all times, as
this may result in damage to the screen.
y y It is recommended to move the TV in the
box or packing material that the TV originally
came in.
y y Before moving or lifting the TV, disconnect
the power cord and all cables.
y y When holding the TV, the screen should face
away from you to avoid damage.
y y Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
y y When transporting the TV, do not expose the
TV to jolts or excessive vibration.
y y When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
y y Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ASSEMBLING AND PREPARING
Setting up the TV
17
LA86**, LA960*
ENGLISH
ENG
Image shown may differ from your TV.
1
Attaching the stand
LA79**
1
M4 x L14
4EA
Stand Base
Stand Body
2
Front
Stand Base
2
3
3
M4 x L14
M4 x L16, 4EA
(Only LA86**)
4EA
M4 x L20, 4EA
(Only LA960*)
18
ASSEMBLING AND PREPARING
LA965*
LA97**
ENGLISH
ENG
1
1
Stand Base
Stand Base
2
2
1
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
3
NOTE
yy Be sure to attach the upper mounting
hole first, and then attach the lower
connection second.
3
M4 x L14
4EA
NOTE
M4 x L14
4EA
yy The stand screws are already attached
at the back of the TV. Please use these
attached screws to assemble the TV and
stand. (Only 65LA97**)
ASSEMBLING AND PREPARING
LA98**
19
ENGLISH
ENG
4
1
Stand Body
Front
Stand Base
M4 x L20
4EA
2
CAUTION
M5 x L16
6EA
3
Front
y y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y y Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with excessive
force otherwise they may be worn out
and become loose.
NOTE
y y Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
20
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- - Leave a 10 cm (minimum) space from
the wall for proper ventilation.
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
(Only 42/47LA86**)
10
10
10 cm
m
10 c
10 cm
10 cm
Swivel 8 degrees to the left or right and adjust
the angle of the TV to suit your view.
(Only 55/60LA86**)
10 cm
2 Connect the power cord to a wall outlet.
8
8
CAUTION
y y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Swivel 7 degrees to the left or right and adjust
the angle of the TV to suit your view.
(Only LA98**)
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
7
7
Swivel 15 degrees to the left or right and adjust
the angle of the TV to suit your view.
(Only LA79**)
CAUTION
15
15
y y When adjusting the angle of the product,
watch out for your fingers.
» »Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
<Rear>
<Front>
ASSEMBLING AND PREPARING
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
WARNING
yy If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
»» Using cabinets or stands
recommended by the manufacturer
of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not
overhanging the edge of the
supporting furniture.
»» Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»» Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
yy Make sure that children do not climb on
or hang on the TV.
10 cm
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
10 cm
10 cm
10 cm
CAUTION
(Only LA97**)
yy When TV Wall Mount installation is applied
please consider adequate spacing around
perimeter of TV and at bottom for proper
operation of Sliding Speaker compartment.
Inadequate space may interfere with
normal operation of Sliding Speaker
compartment.
»»Sliding Speaker OPEN state lowers/
extends to (25-35mm) below TV.
ENGLISH
ENG
Securing the TV to a wall
21
22
ASSEMBLING AND PREPARING
ENGLISH
ENG
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
47/55LA79**
42/47/55LA86**
47/55LA96**
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws 4
Wall mount bracket LSW430B
MSW240
Model
65LA97**
84LA98**
VESA (A x B)
600 x 400
Standard screw
M8
Number of screws 4
Wall mount bracket LSW630B
Wall mount bracket
LSW430B
LSW430BX
LSW630B
MSW240
65LA965*
55LA97**
60LA86**
400 x 400
M6
4
LSW430B
70LA86**
400 x 400
M8
4
LSW430BX
CAUTION
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
NOTE
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching the LG wall mount
bracket to the TV, do not use wall mount
spacers and wall mount screws provided
with the LG wall mount bracket. Please
use wall mount inner spacers and wall
mount screws provided with the TV
accessory. (Only LA97**)
A
B
Wall Mount Inner Spacer
ASSEMBLING AND PREPARING
Cable Holder
yy Be sure to use the existing Components
provided with the TV. Do NOT use
components supplied with Wall Bracket to
install Wall Bracket to TV. (Only LA97**)
Wall mount inner Wall mount screws
spacers
4EA, M6 x L54
4EA
(Only 55LA97**)
4EA, M8 x L44
(Only 65LA97**)
Cable Management
(Only LA98**)
Cable Holder
Tidying cables
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
(Only LA79**)
⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ
Cable Management
Cable Holder
Gather and bind the cables with the Cable
Holder.
(Only LA97**)
Cable Holder
Cable Management
(Only LA86**, LA960*)
Cable Holder
CAUTION
Cable Management
yy Do not move the TV by holding the cable
holders, as the cable holders may break,
and injuries and damage to the TV may
occur.
ENGLISH
ENG
(Only LA965*)
CAUTION
23
24
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using Sliding Speaker
Using Built-in Camera
(Only LA97**)
(Only 42/47/55/60LA86**, LA960*, LA97**)
This TV does not support the use of an
external camera.
NOTE
Sliding Speaker
1 W
hen TV is turned ON – the hidden
Speaker slides out from inside the TV.
Settings
SOUND
2 Go to More
Sliding Speaker to set Sliding Speaker.
» »If you are mounting TV on entertainment
table/unit please make sure there is enough
clearance between yourself and foreign
objects to allow operation of internal sliding
speaker otherwise injury to yourself or
damage to TV could occur.
» »Please Do NOT use excessive force during
operation of internal sliding Speaker as it
may cause it to malfunction.
» »Make sure Speaker is in OPEN position
when viewing TV as sound will be abnormal
or distorted.
3 When transporting the TV, make sure that
the Sliding Speaker is closed. If the Sliding
Speaker is open when being transported,
it may become damaged, resulting in
malfunction.
» »To close the Sliding Speaker, go to SOUND
Sliding Speaker, select ‘Open when
TV is turned on’ and press the POWER
button.
y y Before using the built-in camera, you
must recognize the fact that you are
legally responsible for the use or misuse
of the camera by the relevant national
laws including the criminal law.
y y The relevant laws include the Personal
Information Protection law which
regulates the processing and transferring
of personal information and the law which
regulates the monitoring by camera in a
workplace and other places.
y y When using the built-in camera,
avoid questionable, illegal, or immoral
situations. Other than at public places or
events, consent to be photographed may
be required. We suggest avoiding the
following situations:
(1) Using the camera in areas where the
use of camera is generally prohibited
such as restroom, locker room, fitting
room and security area.
(2) Using the camera while causing the
infringement of privacy.
(3) Using the camera while causing the
violation of the relevant regulations or
laws.
ASSEMBLING AND PREPARING
3 Push down the built-in camera when you are
not using it.
1 Pull up the slide at the back of the TV.
Slide
Name of Parts of Built-in Camera
Microphone
Indicator
Camera Lens
NOTE
y y Remove the protective film before using
the built-in camera.
2 You can adjust the angle of the camera with
the angle adjustment lever on the back of the
built-in camera (within 5 degrees vertically).
Angle
Adjustment
Lever
Checking the Camera’s Shooting
Range
1 Press the SMART button on the remote
control to display the More menu.
2 Select Settings from the More menu and
then press the Wheel(OK) button.
3 Go to OPTION
Camera Setting Help
and press the Wheel(OK) button.
NOTE
y y The optimal distance from the camera
to use the motion recognition function is
between 1.5 and 4.5 m.
ENGLISH
ENG
Preparing Built-in Camera
25
26
MAKING CONNECTIONS
ENGLISH
ENG
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the LA86** models.
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
NOTE
y y The external device connection may differ
from the model.
(LA965*, LA97**, LA98** : HDMI/DVI IN
1/2/3)
y y Connect external devices to the TV
regardless of the order of the TV port.
y y If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
y y Refer to the external equipment’s manual
for operating instructions.
y y If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
y y In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
y y In PC mode, some resolution settings
may not work properly depending on the
graphics card.
NOTE
y y Use a signal splitter to use more than 2
TVs.
y y If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y y If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
y y An antenna cable and converter are not
supplied.
y y Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC.
y y Display of Ultra HD(3840 x 2160 pixels)
content compatible; additional device
capable of processing Ultra HD source
content (in 2D or 3D) may be required
and will be sold separately.
MAKING CONNECTIONS
Transmits the digital video and audio signals
from an external device to the TV. Connect the
external device and the TV with the HDMI cable
as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
ARC (Audio Return Channel)
yyAn external audio device that supports
SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
yyWhen connected with a high-speed
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
Headphone connection
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown on the
following illustration.
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
(*Not Provided)
(*Not Provided)
HDMI
NOTE
yy It is recommended to use the TV with
the HDMI connection for the best image
quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested
to carry an HD signal up to 1080p and
higher.
yy Supported HDMI Audio format : Dolby
Digital, DTS, PCM (Up to 192 KHz,
32 KHz/44.1 KHz/48 KHz/88 KHz/96
KHz/176 KHz/192 KHz).
NOTE
yy AUDIO menu items are disabled when
connecting a headphone.
yy When changing AV MODE with a
headphone connected, the change
is applied to video but not to audio.
(Depending on model)
yy Optical Digital Audio Out is not available
when connecting a headphone.
yy Headphone impedance: 16 Ω
yy Max audio output of headphone: 0.624
mW to 1.04 mW
yy Headphone jack size: 0.35 cm
ENGLISH
ENG
HDMI connection
27
28
MAKING CONNECTIONS
ENGLISH
ENG
DVI to HDMI connection
Component connection
Transmits the digital video signal from an
external device to the TV. Connect the external
device and the TV with the DVI-HDMI cable as
shown. To transmit an audio signal, connect an
audio cable.
Transmits analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with a component
gender cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
IN
AV
VIDEO
COMPONENT
AUDIO
PR
YELLOW
(Use the composite
video cable provided.)
YELLOW
Y
GREEN
(Use the
component video
cable provided.)
RED
BLUE
GREEN
RED
RED
BLUE
GREEN
RED
RED
BLUE
GREEN
WHITE
RED
WHITE
YELLOW
(*Not Provided)
PB
(*Not Provided)
AUDIO OUT
DVI OUT
WHITE
DVD / Blu-Ray /
HD Cable Box
L
R
DVD/ Blu-Ray / HD Cable Box / PC
AUDIO
VIDEO
NOTE
y y Depending on the graphics card, DOS
mode may not work if a HDMI to DVI
Cable is in use.
y y When using the HDMI/DVI cable, Single
link is only supported.
NOTE
y y If cables are not installed correctly, it
could cause this image to display in black
and white or with distorted colours.
MAKING CONNECTIONS
29
Audio connection
Transmits analog video and audio signals
from an external device to the TV. Connect the
external device and the TV with the composite
gender cable as shown.
You may use an optional external audio system
instead of the built-in speaker.
Digital optical audio connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
AV
VIDEO
IN
COMPONENT
COMPONENT
AUDIO
PR
Y
PB
PB
Y
OPTICAL
DIGITAL
AUDIO
YELLOW
(Use the composite video
cable provided.)
WHITE
RED
WHITE
RED
YELLOW YELLOW
(*Not Provided)
Digital Audio System
RED
WHITE
YELLOW
VIDEO
(*Not Provided)
L (MONO) AUDIO R
VCR / DVD / Blu-Ray /
HD Cable Box
OPTICAL AUDIO IN
NOTE
y y Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
y y Audio with ACP (Audio Copy Protection)
function may block digital audio output.
y y If you are using Built-in Sound bar
(NB7530), please set the Settings
SOUND
Sound Out
Built-in
Sound bar. (Only LA9800-TC)
ENGLISH
ENG
Composite connection
30
MAKING CONNECTIONS
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia
files.
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
USB IN
3
MHL connection
HDD IN
USB IN
2
1(USB 3.0 IN)
ENGLISH
ENG
USB connection
HDD
(*Not Provided)
MHL passive cable
(*Not Provided)
HUB
(*Not Provided)
USB
(*Not Provided)
Mobile phone
NOTE
NOTE
yy Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on
the TV directly.
yy Connect the external power source if your
USB is needed.
yyConnect the mobile phone to the HDMI/
DVI IN 4 (MHL) port to view the phone
screen on the TV.
(LA965*, LA97**, LA98** : HDMI/DVI IN 3
(MHL))
yyThe MHL passive cable is needed to
connect the TV and a mobile phone.
yyThis only works for the MHL-enabled
phone.
yySome applications can be operated by the
remote control.
yyFor some mobile phones supporting MHL,
you can control with the magic remote
control.
yyRemove the MHL passive cable from the
TV when:
»» the MHL function is disabled
»» your mobile device is fully charged
in standby mode
REMOTE CONTROL
31
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To replace batteries,
open the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
or
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
yyThe remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor on the TV.
(Depending on model)
RATIO
(POWER) Turns the TV on or off.
(User Guide) Sees user- guide.
RATIO Resizes an image.
INPUT Changes the input source.
TV/RAD Selects Radio, TV and DTV programme.
INPUT
TV/
RAD
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
Adjusts the volume level.
FAV Accesses your favourite programme list.
3D Used for viewing 3D video.
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
FAV
P
A
G
E
MUTE
INFO
MY APPS
OK
BACK
Colour buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
GUIDE
EXIT
T.OPT
Q.MENU
SUBTITLE
TEXT
LIVE TV
REC
SETTINGS
AV MODE
INFO
Views the information of the current programme and screen.
SMART
Accesses the Smart Home menus.
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
GUIDE Shows programme guide.
EXIT Clears on-screen displays and return to TV viewing.
TELETEXT BUTTONS ( TEXT, T.OPT) These buttons are used for teletext.
SUBTITLE Recalls your preferred subtitle in digital mode.
Q. MENU Accesses the quick menus.
LIVE TV Return to LIVE TV.
Control buttons (
) Controls the Premium contents, Time
MachineⅡor Smart Share menus or the SIMPLINK compatible devices
(USB or SIMPLINK or Time MachineⅡ).
REC
Start to record and display record menu.
SETTINGS Accesses the main menus.
AV MODE Selects an AV mode.
Accesses the AV devices connected with the HDMI cable
through HDMI-CEC. Opens the SIMPLINK menu.
ENGLISH
ENG
REMOTE CONTROL
32
REMOTE CONTROL
ENGLISH
ENG
(Depending on model)
(POWER) Turns the TV on or off.
TV/RAD Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
Q. MENU Accesses the quick menus.
GUIDE Shows programme guide.
RATIO Resizes an image.
INPUT Changes the input source.
GUIDE
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV
SMART
MY APPS
LIVE TV
REC
Adjusts the volume level.
FAV Accesses your favourite programme list.
3D Used for viewing 3D video.
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
TELETEXT BUTTONS ( TEXT, T.OPT) These buttons are used for teletext.
INFO
Views the information of the current programme and screen.
SMART
Accesses the Smart Home menus.
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and return to TV viewing.
SETTINGS Accesses the main menus.
REC
Start to record and display record menu.
LIVE TV Return to LIVE TV.
Control buttons (
) Controls the Premium contents, Time
MachineⅡor Smart Share menus or the SIMPLINK compatible devices
(USB or SIMPLINK or Time MachineⅡ).
Colour buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
T
(
Retur
Adj
MAGIC REMOTE CONTROL FUNCTIONS
33
This item is not included for all models.
When the message “Magic Remote Control battery is low. Change the battery.”
is displayed, replace the battery. To replace batteries, open the battery cover,
replace batteries (1.5 V AA) matching
and
ends to the label inside the
compartment, and close the battery cover. Be sure to point the remote control
toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
(Only LA79**, LA86**, LA960*, LA98**)
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
(Voice recognition)
(Depending on model)
BACK
Returns to the previous level.
Navigation buttons
(up/down/left/right)
Scrolls through menus or
options.
Adjusts the volume level.
/Q.MENU
Accesses the quick menus.
Accesses the Screen
Remote including number
button and colour button.
3D
Used for viewing 3D video.
(MUTE)
Mutes all sounds.
SMART
Accesses the Smart Home menu.
Lighting on/off
Turns the light on and off.
If you set it to ON, the light
automatically turns off in 5 seconds.
Wheel(OK)
Selects menus or options and
confirms your input. Scrolls
through the saved programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears,
and the magic remote control
works as a regular remote control.
To display the pointer again,
shake the magic remote control
from side to side.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
ENGLISH
ENG
Magic Remote Control Functions
34
MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
(Only LA965*, LA97**)
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
SMART
Accesses the Smart Home
menu.
BACK
Returns to the
previous level.
Navigation buttons (up/down/
left/right)
Scrolls through menus or
options.
(Voice recognition)
(Depending on model)
3D
Used for viewing 3D
video.
Adjusts the volume
level.
ꕌPꕍ
Scrolls through the
saved programmes or
channels.
(MUTE)
Mutes all sounds.
P
Wheel(OK)
Selects menus or options and
confirms your input. Scrolls
through the saved programmes.
If you press the navigation
button while moving the
pointer on the screen, the
pointer disappears, and the
magic remote control works
as a regular remote control. To
display the pointer again, shake
the magic remote control from
side to side.
/Q.MENU
Accesses the quick menus.
Accesses the Screen Remote
including number button and
colour button.
Voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation,
intonation and speed) and the environment (noise and TV volume).
1 Press the Voice recognition button.
2 Speak when the voice display window appears on the left of the TV screen.
• The voice recognition may fail when you speak too fast or too slow.
• Use the Magic remote control no further than 10 cm from your face.
35
Registering Magic Remote Control
ENGLISH
ENG
ote
d
MAGIC REMOTE CONTROL FUNCTIONS
It is necessary to ‘pair’ (register) the magic
remote control to your TV before it will work.
BACK to register
HOME
How
the Magic Remote Control
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK
and SMART buttons together
for 5 seconds to reset, then
register it by following “How
to register the Magic Remote
Control” above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic Remote
Control
1 If the pointer disappears,
move the Magic Remote
Control slightly to left or right.
Then, it will automatically
appear on the screen.
»»If the pointer has not been
used for a certain period
of time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver
of the Magic Remote Control
at your TV then move it left,
right, up or down.
»»If the pointer does not
work properly, leave the
Magic Remote Control for
10 seconds then use it
again.
More
If you press Wheel(OK) on the Magic
Control, the following screen
1 Remote
appears. Shows information about the
current programme and screen.
2 You can select More Menu.
Precautions to Take when Using
the Magic Remote Control
yyUse the Magic Remote Control within the
maximum communication distance (10 m).
Using the Magic Remote Control beyond
this distance, or with an object obstructing
it, may cause a communication failure.
yyA communication failure may occur due
to nearby devices. Electrical devices such
as a microwave oven or wireless LAN
product may cause interference, as these
use the same bandwidth (2.4 GHz) as the
Magic Remote Control.
yyThe Magic Remote Control may be
damaged or may malfunction if it is
dropped or receives a heavy impact.
yyTake care not to bump into nearby
furniture or other people when using the
Magic Remote Control.
yyManufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility
of electric wave interference.
yyIt is recommended that an Access Point
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than
1 m, the Magic Remote Control may not
perform as expected due to frequency
interference.
36
USING THE USER GUIDE
ENGLISH
ENG
Using the User guide
User Guide allows you to more easily access the detailed TV information.
1 Press the SMART button to access the
Smart Home menu.
2 Select User Guide and press Wheel(OK).
User Guide
3
1
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
OPTION
To set country
LG SMART Function
Disabled Assistance
Advanced Function
Information
To set language
2
To set Magic remote control
Online User Guide
Index
4
5
User Guide

User Guide
NOTE
y y You can also access the User Guide by
pressing (User Guide) in the remote
control. (Depending on model)
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍ(Navigation buttons) to
move between pages.
4
Allows to browse the description of the
function you want from the index.
5
Provides the detailed information on
the functions of LG Smart TV when the
Internet is connected.
(It may not be available depending on the
country/language.)
1
OPTION > To set language
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
Try Now
2
Close
Index
Online User Guide
1
Shows the description of the selected
menu. You can use ꕌ/ꕍ(Navigation
buttons) to move between pages.
2
Moves to the selected menu directly from
the User Guide.
MAINTENANCE / TROUBLESHOOTING
37
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y y Make sure to turn the power off and disconnect the power cord and all other cables first.
y y When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
y y Avoid touching the screen at all times, as this may result in damage to the screen.
y y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
y y Do not use any chemicals as this may damage the product.
y y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
y y Check the remote control sensor on the product and try again.
y y Check if there is any obstacle between the product and the remote control.
y y Check if the batteries are still working and properly installed ( to ,
to ).
No image display
and no sound is
produced.
y y Check if the product is turned on.
y y Check if the power cord is connected to a wall outlet.
y y Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off
suddenly.
y y Check the power control settings. The power supply may be interrupted.
y y Check if the Auto sleep feature is activated in the Time settings.
y y If there is no signal while the TV is on, the TV will turn off automatically
after 15 minutes of inactivity.
When connecting
to the PC (HDMI
DVI), ‘No signal’ or
‘Invalid Format’ is
displayed.
y y Turn the TV off/on using the remote control.
y y Reconnect the HDMI cable.
y y Restart the PC with the TV on.
ENGLISH
ENG
MAINTENANCE
38
ENVIRONMENTAL INFORMATION
ENGLISH
ENG
Environmental Information
(India only)
WEEE
Disposal of your old appliance
1. W
hen this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the e-waste (Management and Handling) Rules, 2011.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. F
or more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased
the product.
5. This product does not contain any of the hazardous substances as specified in the rule 13 (1) and (2)
of the e-waste (Management and Handling) Rules, 2011.
SPECIFICATIONS
39
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
Output Power (Max.)
802.11a: 11 dBm
802.11b: 14 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth module (BM-LDS401) specification
Standard
Bluetooth Version 3.0
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.)
10 dBm or lower
y yBecause band channel used by the country could be different, the user can not change or adjust
the operating frequency and this product is set for the regional frequency table.
ENGLISH
ENG
SPECIFICATIONS
40
SPECIFICATIONS
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
47LA79**
55LA79**
47LA7900-TA
47LA790Y-TA
55LA7900-TA
55LA790Y-TA
1077.0 x 690.0 x 285.0 1247.0 x 789.0 x 326.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
18.5
25.3
Without stand (kg)
16.8
23.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Without stand(mm) 1077.0 x 625.0 x 34.1
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
Without stand (kg)
42LA86**
47LA86**
55LA86**
42LA8610-TA
42LA8600-TA
42LA861Y-TA
42LA860Y-TA
47LA8610-TA
47LA8600-TA
47LA861Y-TA
47LA860Y-TA
55LA8610-TA
55LA8600-TA
55LA861Y-TA
55LA860Y-TA
948.0 x 631.0 x 269.0
1059.0 x 694.0 x 269.0 1229.0 x 788.0 x 316.0
Without stand(mm) 948.0 x 562.0 x 35.1
Power requirement
MODELS
1247.0 x 722.0 x 34.1
1059.0 x 625.0 x 35.1
1229.0 x 721.0 x 35.1
15.6
19.3
26.2
13.5
17.2
23.4
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
60LA86**
70LA86**
60LA8610-TA
60LA8600-TA
60LA861Y-TA
60LA860Y-TA
70LA8610-TA
70LA8600-TA
70LA861Y-TA
70LA860Y-TA
1338.0 x 850.0 x 316.0 1582.0 x 997.0 x 401.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
30.5
46.1
Without stand (kg)
27.7
42.1
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
47LA960*
55LA960*
47LA9600-TA
47LA960Y-TA
55LA9600-TA
55LA960Y-TA
Without stand(mm) 1338.0 x 782.0 x 35.1
Power requirement
MODELS
1582.0 x 922.0 x 57.9
1050.0 x 684.0 x 266.0 1220.0 x 781.0 x 305.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
15.5
Without stand (kg)
13.6
18.4
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Without stand(mm) 1050.0 x 616.0 x 31.2
Power requirement
1220.0 x 712.0 x 31.5
21.0
35.1
0 Hz
MODELS
55LA965*
65LA965*
55LA9650-TA
55LA965Y-TA
65LA9650-TA
65LA965Y-TA
41
ENGLISH
ENG
16.0
SPECIFICATIONS
1234.0 x 790.0 x 261.0 1455.0 x 912.0 x 294.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
26.1
36.8
Without stand (kg)
24.6
35.0
Without stand(mm) 1234.0 x 755.0 x 41.9
1455.0 x 881.0 x 43.5
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power requirement
MODELS
55LA97**
65LA97**
84LA98**
55LA9700-TA
55LA970Y-TA
65LA9700-TA
65LA970Y-TA
84LA9800-TA
84LA9800-TC
84LA980Y-TA
84LA980Y-TC
1230.0 x 781.0 x 274.0 1451.0 x 910.0 x 325.0 1916.0 x 1214.0 x 399.0
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
31.0
44.2
81.7
Without stand (kg)
27.9
40.6
70.4
Without stand(mm) 1230.0 x 714.0(*743.0) 1451.0 x 838.0(*868.0) 1916.0 x 1120.0 x 39.9
x 40.2
x 40.8
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
Power requirement
AC 100-240 V~ 50 / 60 Hz
* : Sliding Speaker open state
Environment condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
(Depending on Country)
Analogue TV
(Depending on Country)
Television System
DVB-T
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
Programme Coverage
VHF, UHF
VHF, UHF, CATV
Maximum number of
storable programmes
DVB-T & Analogue TV : 1,500
External Antenna Impedance
75 Ω
42
SPECIFICATIONS
ENGLISH
ENG
HDMI/DVI-DTV supported mode
HDMI/DVI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640x480
31.469
31.5
59.94
60
640x350
31.468
70.09
31.469
31.5
59.94
60
720x400
31.469
70.08
640x480
31.469
59.94
720x576
31.25
50
800x600
37.879
60.31
1280x720
37.5
44.96
45
50
59.94
60
1024x768
48.363
60.00
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
53.95
54
56.25
61.43
67.5
23.976
24.00
25.00
29.970
30.00
720x480
1920x1080
3840x2160
(Only LA965*
LA97**, LA98**)
Component port connecting information
Component ports
on the TV
Y
PB
PR
Video output ports on
DVD player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
1152x864
54.348
60.053
1360x768
47.712
60.015
1280x1024
63.981
60.020
1920x1080
67.50
60.00
3840x2160
(Only LA965*
LA97**, LA98**)
54
56.25
67.5
24.00
25.00
30.00
yyYou may experience video/sound lag when
playing the ultra HD content (resolution:
3840 x 2160) on your computer, depending
on your computer specifications.
SPECIFICATIONS
43
y yVideo, which is input as below media contents is switched into the 3D screen automatically.
3D supported mode automatically
Input
Signal
640 X 480
480p
576p
720p
HDMI
1080i
1080p
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
59.94 / 60
62.938 / 63
31.25
62.5
50
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.432 / 67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.716 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Field Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo),
JPS(Photo)
ENGLISH
ENG
3D supported mode (Only 3D models)
44
SPECIFICATIONS
ENGLISH
ENG
3D supported mode manually
Signal
Input
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Playable 3D video format
DTV
HD / SD
-
-
ATV(CVBS)
SD
-
-
Component
HD / SD
-
-
1024X768
48.36
1360X768
47.71
1920X1080
67.5
3840x2160
54
56.25
67.5
24.00
25.00
30.00
2D to 3D, Top-and-Bottom(Half),
Side-by-side(Half)
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
60
HDMI-PC
480P
31.5
60
576P
31.25
50
37.5
50
45
60
28.12
50
33.75
60
720p
1080i
HDMI-DTV
1080p
2160p
27
24
28.12
25
33.75
30
56.25
50
67.5
60
53.95
54
56.25
61.43
67.5
23.976
24.00
25.00
29.970
30.00
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row Interleaving,
Column Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row Interleaving,
Column Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Row Interleaving, Column Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row Interleaving,
Column Interleaving
2D to 3D, Top-and-Bottom(Half),
Side-by-Side(Half)
SPECIFICATIONS
45
Signal
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Under 704x480
-
-
2D to 3D
Input
Over 704x480
interlaced
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
Over 704x480
progressive
-
50 / 60
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row Interleaving,
Column Interleaving
Over 704x480
progressive
-
others
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Row Interleaving, Column Interleaving
Under 320x240
-
-
2D to 3D
-
2D to 3D, Side by Side(Half),
Top & Bottom
USB ,DLNA
(Movie)
USB, DLNA
(Photo)
Playable 3D video format
Miracast/
Widi
Over 320x240
-
1024X768p
-
30 / 60
1280x720p
-
30 / 60
1920X1080p
-
30 / 60
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
[ULTRA HD] Video Supported Codec
yyMaximum : 3840 X 2160 @30p
yyMaximum data transfer rate
3840 X 2160(H.264 L5.1) :
50 Mbps (megabits per second)
3840 X 2160(H.265 L5.0) :
25 Mbps (megabits per second)
Extension
.mkv / .mp4 / .ts
.ts
Codec
Video
H.264/AVC
Audio
Dolby Digital, Dolby Digital
Plus, AAC, HE-AAC
Video
H.265(HEVC)
Audio
Dolby Digital, Dolby Digital
Plus, AAC, HE-AAC
NOTE
yy
yy
yy
yy
yy
yy
yy
yy
yy
TV software update may enable new type of H.265(HEVC) codec.
Video files created by some encoders may not be played back.
LG ULTRA HD TV may not be compatible with certain types of HEVC codec contents.
Video files in formats other than the ones specified here may not be played back.
Playback of video files stored on the USB device that do not support High Speed, may not work
properly.
Some subtitles created by users may not work properly.
The video and subtitle files should be placed in the same folder. For subtitles to display
correctly, the video and subtitle files must have the same name.
It supports the playback through USB only.
“ULTRA HD Upgrade Kit” may require for certain LG ULTRA HD TV to access HEVC codec
contents.
ENGLISH
ENG
3D supported mode manually
46
LICENSES / OPEN SOURCE SOFTWARE NOTICE
/ EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Licenses
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
EXTERNAl CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
(Only DTV)
Download PDF