LG | 55UF950T | LG 55UF950T Owner’s Manual

* LG LED TVs are LCD TVs with LED Backlight.
UF77**, UF85**, UF95**, UG87**
P/NO : MFL68062731 (1502 - REV01)
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)
ATTENTION:
This product is quali ed for the BEE Star rating in the Home Mode.
The Objectives of Star Labeling Program is designed to promote energy energy e cient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated energy
consumption.
To reset the television to Star rating quali ed settings, select Home mode from the initial set-up procedure in factory settings under the
Set-up menu.
Safety instructions
Please read these safety precautions carefully before using the product.
ENGLISH
WARNING
Make sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on
earth.) Otherwise possibility you may be electrocuted or injured.
Do not place the TV and/or remote control in the following
environments:
A location exposed to direct sunlight
An area with high humidity such as a bathroom
Near any heat source such as stoves and other devices that
produce heat
Near kitchen counters or humidi ers where they can easily be
exposed to steam or oil
An area exposed to rain or wind
Near containers of water such as vases
Otherwise, this may result in re, electric shock, malfunction or product
deformation.
Do not place the product where it might be exposed to dust. This may
cause a re hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains
electric supply.This plug must remain readily attached and operable
when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord
pin is wet or covered with dust, dry the power plug completely or wipe
dust o . You may be electrocuted due to excess moisture.
Insert power cable plug completely into wall socket otherwise if not
secured completely into socket, re ignition may break out.
Ensure the power cord does not come into contact with hot objects
such as a heater. This may cause a re or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in re or electric shock.
Bend antenna cable between inside and outside building to prevent
rain from owing in. This may cause water damaged inside the Product
and could give an electric shock.
When mounting TV onto wall make sure to neatly install and isolate
cabling from rear of TV as to not create possibility of electric shock /
re hazard.
Do not plug too many electrical devices into a single multiple electrical
outlet. Otherwise, this may result in re due to over-heating.
3
ENGLISH
Do not drop the product or let it fall over when connecting external
devices. Otherwise, this may result in injury or damage to the product.
Keep the anti-moisture packing material or vinyl packing out of the
reach of children. Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause su ocation. Keep it out
of the reach of children.
Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not
consume them. Please seek Doctor- Medical Attention immediately if
child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/
cutlery/screwdriver) between power cable plug and input Wall Socket
while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging into the wall input
terminal. You may be electrocuted. (Depending on model)
Do not put or store in ammable substances near the product. There is a
danger of combustion/explosion or re due to careless handling of the
in ammable substances.
4
Do not drop metallic objects such as coins, hair pins, chopsticks or wire
into the product, or in ammable objects such as paper and matches.
Children must pay particular attention. Electrical shock, re or injury
can occur. If a foreign object is dropped into the product, unplug the
power cord and contact the service centre.
Do not spray water on the product or scrub with an in ammable
substance (thinner or benzene). Fire or electric shock accident can
occur.
Do not allow any impact, shock or any objects to fall into the unit,
and do not drop anything onto the screen. You may be injured or the
product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the
windows and ventilate. It may cause a re or a burn by a spark.
Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
CAUTION
The product has been impacted by shock
The product has been damaged
Foreign objects have entered the product
The product produced smoke or a strange smell
This may result in re or electric shock.
ENGLISH
If any of the following occur, unplug the product immediately and
contact your local service centre.
Install the product where no radio wave occurs.
There should be enough distance between an outside antenna and
power lines to keep the former from touching the latter even when the
antenna falls. This may cause an electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the
TV for a long period of time. Accumulated dust can cause re hazard
and insulation deterioration can cause electric leakage/shock/ re.
Do not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the
product cannot be fully supported. Otherwise, the product may fall or
ip over, which may cause injury or damage to the product.
Apparatus shall not be exposed to dripping or splashing and no objects
lled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
If water or another substance enters the product (like a AC adapter,
power cord, TV), disconnect the power cord and contact the service
centre immediately. Otherwise, this may result in re or electric shock.
If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), x
it carefully so as not to drop.
Only use the attachments / accessories speci ed by the manufacturer.
Only use an authorized AC adapter and power cord approved by
LG Electronics. Otherwise, this may result in re, electric shock,
malfunction or product deformation.
When installing the antenna, consult with a quali ed service
technician. If not installed by a quali ed technician, this may create a
re hazard or an electric shock hazard.
Never Disassemble the AC adapter or power cord. This may result in re
or electric shock.
5
ENGLISH
We recommend that you maintain a distance of at least 2 to 7 times
the diagonal screen size when watching TV. If you watch TV for a long
period of time, this may cause blurred vision.
Do not turn the product On/O by plugging-in or unplugging the power
plug to the wall outlet. (Do not use the power plug for switch.) It may
cause mechanical failure or could give an electric shock.
Only use the speci ed type of battery. This could cause damage to the
remote control.
Please follow the installation instructions below to prevent the product
from overheating.
Do not mix new batteries with old batteries. This may cause the
batteries to overheat and leak.
The distance between the product and the wall should be more
than 10 cm.
Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
Do not install the product on a carpet or cushion.
Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in re.
Batteries should not be exposed to excessive heat. For example, keep
away from direct Sunlight , open replace and electric heaters.
Do not place non-rechargeable batteries in charging device.
Make sure there are no objects between the remote control and its
sensor.
Signal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting
or darken viewing area.
When connecting external devices such as video game consoles, make
sure the connecting cables are long enough. Otherwise, the product
may fall over, which may cause injury or damage the product.
6
Take care not to touch the ventilation openings when watching the TV
for long periods as the ventilation openings may become hot. This does
not a ect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet. This may cause
a re hazard.
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the cord
exits the appliance.
Avoid touching the screen or holding your nger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
When cleaning the product and its components, unplug the power
rst and wipe it with a soft cloth. Applying excessive force may cause
scratches or discolouration. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,
benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in re, electric shock or product damage
(deformation, corrosion or breakage).
ENGLISH
Do not press strongly upon the panel with a hand or sharp object such
as nail, pencil or pen, or make a scratch on it, as it may cause damage
to screen.
When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.
Contact the service centre once a year to clean the internal parts of the
product. Accumulated dust can cause mechanical failure.
Refer all servicing to quali ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn o this unit
by SWITCH.
If the product feels cold to the touch, there may be a small icker
when it is turned on. This is normal, there is nothing wrong with
product.
When unplugging the cable, grab the plug and unplug it, by pulling
at the plug. Don t pull at the cord to unplug the power cord from the
power board, as this could be hazardous.
The panel is a high technology display product with resolution of two
million to six million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does not a ect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
When moving the product, make sure you turn the power o rst. Then,
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a re
hazard or cause electric shock.
7
Viewing 3D imaging (Only 3D
models)
WARNING
ENGLISH
You may nd di erent brightness and color of the panel depending on
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
* Disclaimer
LG LED TVs are LCD TVs with LED backlighting.
Displaying a still image (e.g., broadcasting channel logo, on-screen
menu, scene from a video game) for a prolonged time may cause
damage to the screen, resulting in retention of the image, which is
known as image sticking. The warranty does not cover the product for
image sticking.
Avoid displaying a xed image on your televisions screen for a
prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking
may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
Viewing environment
Viewing Time
- When watching 3D contents, take 5 - 15 minute breaks every
hour. Viewing 3D contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
Some users may experience a seizure or other abnormal symptoms
when they are exposed to a ashing light or particular pattern
from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or
have a chronic illness such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
3D Contents are not recommended to those who su er from stereo
blindness or stereo anomaly. Double images or discomfort in
viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or
astigmatism, you may have trouble sensing depth and easily feel
fatigue due to double images. It is advised to take frequent breaks
than the average adult.
If your eyesight varies between your right and left eye, revise your
eyesight prior to watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
Generated Sound
Cracking noise: A cracking noise that occurs when watching or turning
o the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
This generated sound does not a ect the performance and reliability
of the product.
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
8
Do not watch 3D contents when you feel fatigue from lack of sleep,
overwork or drinking.
When these symptoms are experienced, stop using/watching 3D
contents and get enough rest until the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may
include headache, eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image, visual inconvenience or
fatigue.
CAUTION
NOTE
Viewing age
9
ENGLISH
Separate purchase
Lifting and moving the TV
Separate purchase items can be changed or modi ed for quality
improvement without any noti cation. Contact your dealer to buy
these items. These devices only work with certain models. The model
name or design may be changed depending on the upgrade of product
functions, manufacturer s circumstances or policies.
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
(Depending on model)
AG-F***
Cinema 3D Glasses
AN-MR600
Magic Remote
AN-VC550
Smart camera
LG Audio Device
AG-F***DP
Dual Play Glasses
Maintenance
It is recommended to move the TV in the box or packing material
that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and
all cables.
When holding the TV, the screen should face away from you to
avoid damage.
Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the
product lifespan.
Make sure to turn the power o and disconnect the power cord and
all other cables rst.
When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
When transporting a large TV, there should be at least 2 people.
When transporting the TV by hand, hold the TV as shown in the
following illustration.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
Avoid touching the screen at all times, as this may result in damage
to the screen.
Do not push, rub, or hit the screen surface with your ngernail or a
sharp object, as this may result in scratches and image distortions.
Do not use any chemicals as this may damage the product.
Do not spray liquid onto the surface. If water enters the TV, it may
result in re, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
10
When transporting the TV, do not expose the TV to jolts or
excessive vibration.
When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
Do not apply excessive pressure to cause exing /bending of frame
chassis as it may damage screen.
When handling the TV, be careful not to damage the protruding
joystick button.
CAUTION
Avoid touching the screen at all times, as this may result in damage
to the screen.
Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.
Using the joystick button
Basic Functions
(Depending on model)
1 Lift and tilt the TV into its upright position on a table.
ENGLISH
(Image shown may di er from your TV.)
You can simply operate the TV functions, pressing or moving the joystick
button up, down, left or right.
Intelligent sensor Adjusts the image quality and brightness based
on the surrounding environment.
Mounting on a table
Leave a 10 cm (minimum) space from the wall for proper
ventilation.
Remote Control
Intelligent sensor
power Indicator
When the TV is turned o , place your
nger on the joystick button and
press it once and release it.
When the TV is turned on, place your
nger on the joystick button and
Power O
press it once for a few seconds and
release it. (However, if the Menu
button is on the screen, pressing and
holding the joystick button will let
you exit the menu.)
If you place your nger over the
Volume
joystick button and move it left or
Control
right, you can adjust the volume level
you want.
If you place your nger over the
Programmes joystick button and move it Forward or
Control
Backward, you can scrolls through the
saved programmes you want.
Power On
NOTE
You can set the power indicator light to ON or OFF by selecting
GENERAL in the main menus
Adjusting the Menu
When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
right.
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat, as this may result in
re or other damage.
WARNING
If a television is not positioned in a su ciently stable location, it can
be potentially hazardous due to falling. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of
the television.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of the
supporting furniture.
Not placing the television on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the
television to a suitable support.
Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.
Educating children about the dangers of climbing on furniture to
reach the television or its controls.
Turns the power o .
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the Quick Settings.
NOTE
When your nger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button rst, you may not be able to adjust the
volume level and saved programmes.
Intelligent sensor Adjusts the image quality and brightness based on the surrounding environment.
NOTE: You can set the power indicator light to ON or OFF by selecting GENERAL in the main menus
11
Using the kensington security
system
Mounting on a wall
(Depending on model)
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the oor. When you attach the TV to other building materials, please
contact quali ed personnel. LG recommends that wall mounting be
performed by a quali ed professional installer. We recommend the
use of LGs wall mount bracket. When you do not use LGs wall mount
bracket, please use a wall mount bracket where the device is adequately
secured to the wall with enough space to allow connectivity to external
devices.
ENGLISH
Image shown may di er from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
Securing the TV to a wall
(Depending on model)
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
If there are bolts inserted at the eye-bolts position, remove the
bolts rst.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
Model
40/43UF77**
VESA (A x B)
Standard screw
Number of screws
200 x 200
M6
4
60/65UF77**
60/65UF85**
65UF86**
65UF95**
65UG87**
300 x 300
M6
4
Model
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the at surface.
CAUTION
Make sure that children do not climb on or hang on the TV.
VESA (A x B)
Standard screw
Number of screws
NOTE
Use a platform or cabinet that is strong and large enough to
support the TV securely.
Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
A
B
12
49/555UF77***
49/555UF85***
55UF86***
55UF95***
55UG87***
300 x 300
M6
4
70/79UF77**
79UF86**
600 x 400
M8
4
CAUTION
Connections (noti cations)
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external devices
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
NOTE
NOTE
Use the screws that are listed on the VESA standard screw
speci cations.
The wall mount kit includes an installation manual and necessary
parts.
The wall mount bracket is not provided along with the TV set.
The length of screws may di er depending on the wall mount.
Make sure to use the proper length.
For more information, refer to the manual supplied with the wall
mount.
When installing the wall mounting bracket, use the Adhesive
Label. The Adhesive Label will protect the opening from
accumulating dust and dirt. (Only when the item of the following
form is provided)
Provided item
ENGLISH
Disconnect the power rst, and then move or install the TV.
Otherwise electric shock may occur.
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
The Screw Cover will protect the opening from accumulating dust
and dirty.
If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or quali ed personnel.
Do not over tighten the screws as this may cause damage to the TV
and void your manufacturer s warranty.
Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer s warranty.
The external device connection may di er from the model.
Connect external devices to the TV regardless of the order of the
TV port.
If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
Refer to the external equipment s manual for operating
instructions.
If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
In PC mode, some resolution settings may not work properly
depending on the graphics card.
If Ultra HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC s
performance. (Depending on model)
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 ).
Adhesive label
When attaching a wall mounting bracket to the TV, insert the wall
mount spacers into the TV wall mount holes to adjust the vertical
angle of the TV. (Only when the item of the following form is
provided)
Provided Item
Use a signal splitter to use more than 2 TVs.
If the image quality is poor, install a signal ampli er properly to
improve the image quality.
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
An antenna cable and converter are not supplied.
Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
For a location that is not supported with Ultra HD broadcasting,
this TV cannot receive Ultra HD broadcasts directly. This TV cannot
receive Ultra HD (3840 x 2160 pixels) broadcasts directly because
the related standards have not been con rmed. (Depending on
model)
Satellite dish connection
Wall Mount Spacer
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 ).
13
A
Other connections
ENGLISH
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Picture HDMI ULTRA HD Deep
Colour
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- O : Support 4K @ 50/60 Hz (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer. However, if the device doesn t
support it, it may not work properly. In that case, connect the device
to a di erent HDMI port or change the TV s HDMI ULTRA HD Deep
Colour setting to O .
(This feature is available on certain models which are supported
ULTRA HD Deep Colour only.)
Remote control
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V
AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote
control.
In Analogue TV and some countries, some remote control buttons
may not work.
The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
INPU T Q.MENU
1
1
2
3
4
5
6
7
8
9
GUIDE
0
Q.VIEW
A
FAV
2
MUTE
14
P
A
G
E
B
(POWER) Turns the TV on or o .
Changes the input source.
/ (Q. Settings) Accesses the Quick Settings.
1
Views the information of the current programme and
screen. (Depending on model)
1
Resizes an image. (Depending on model)
(User Guide) Sees user- guide.
Number buttons Enters numbers.
Shows programme guide.
Returns to the previously viewed programme.
D
B
RECENT
OK
BACK
C
LIVE MENU
EXIT
T.OPT
SLEEP
Teletext buttons (
/
)These buttons are used for
teletext.
Sets the sleep timer.
Returns to LIVE TV.
(Control buttons
) Controls the Premium
contents, Time Machine or SmartShare menus or the SIMPLINK
compatible devices (USB or SIMPLINK or Time Machine).
Starts to record and displays record menu. (Only Time
Machine supported model)
Recalls your preferred subtitle in digital mode.
By pressing the AD button, audio descriptions function will be
enabled. (Depending on model)
Selects Radio, TV and DTV programme.
ENGLISH
Adjusts the volume level.
Accesses your favourite programme list.
2
Used for viewing 3D video. (Depending on model)
2
Views the information of the current programme and
screen. (Depending on model)
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
Magic remote functions
(Depending on model)
TEXT
LIVE TV
REC
SUBTITLE
AD/
D
TV/RAD
C
Shows the previous history.
(HOME) Accesses the Home menu.
Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and con rms your input.
Returns to the previous level.
Shows the list of Programme, Search and Recorded.
Clears on-screen displays and returns to TV viewing.
Coloured buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
When the message Magic remote battery is low. Change the battery. is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote
control.
In Analogue TV and some countries, some remote control buttons
may not work.
A
1. @
2 abc
3 def
4 ghi
5 jkl
6 mno
7pqrs
8 tuv
9wxyz
LIST
0
INFO
EXIT
B
15
A
D
ENGLISH
(POWER) Turns the TV on or o .
(INPUT) Changes the input source.
Number buttons Enters numbers.
Accesses the saved programmes list.
(Space) Opens an empty space on the screen keyboard.
Views the information of the current programmes and screen.
B
Adjusts the volume level.
Scrolls through the saved programmes.
(MUTE) Mutes all sounds.
By Pressing and holding the
button, video/audio descriptions function will be enabled. (Depending on model)
(HOME) Accesses the Home menu.
(BACK) Returns to the previous screen.
Clears on-screen displays and returns to Last Input viewing.
Used for viewing 3D video. (Only 3D models)
(Voice recognition)
Network connection is required to use the voice recognition function.
1 Press the voice recognition button.
2 Speak when the voice display window appears on the left of the
TV screen.
Use the Magic Remote no further than 10 cm from your face.
The voice recognition may fail when you speak too fast or too
slowly.
The recognition rate may vary depending on the user s
characteristics (voice, pronunciation, intonation, and speed) and
the environment (noise and TV volume).
(Q. Settings) Accesses the Quick Settings.
Coloured buttons These access special functions in some menus.
( : Red,
: Green,
: Yellow,
: Blue)
Teletext buttons (
,
) These buttons are used for teletext.
Recalls your preferred subtitle in digital mode.
Registering magic remote
How to register the magic remote
To use the Magic Remote, rst pair it with your TV.
C
GUIDE
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
the remote control.
on Wheel (OK)
* If the TV fails to register the Magic Remote, try again after turning
the TV o and back on.
TEXT
T.OPT
SUBT.
D
How to deregister the magic remote
(HOME) buttons at the same time, for
Press the (BACK) and
ve seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
ter Magic Remote at once.
C
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the wheel button.
(up/down/left/right) Press the up, down, left or
right button to scroll the menu. If you press
buttons
while the pointer is in use, the pointer will disappear from the screen
and Magic Remote will operate like a general remote control. To
display the pointer on the screen again, shake Magic Remote to the
left and right.
Shows programme guide.
(Screen Remote) Displays the Screen Remote.
* Accesses the Universal Control Menu. (Depending on model)
16
button will let you cancel and re-regis-
How to use magic remote
Use the remote control within the speci ed range (within 10 m).
You may experience communication failures when using the device
outside the coverage area or if there are obstacles within the
coverage area.
You may experience communication failures depending on the
accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may
cause communication failures.
The Magic Remote may not work properly if a wireless router (AP)
is within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
Do not disassemble or heat the battery.
Do not drop the battery. Avoid extreme shocks to the battery.
Inserting the battery in the wrong way may result in explosion.
Take care not to bump into nearby furniture or other people
when using the magic Remote
Usage of alkaline battery is recommended.
ENGLISH
Shake the Magic Remote slightly to the right and left or press
, (HOME) , (INPUT) buttons to make the pointer
appear on the screen.
(In some TV models, the pointer will appear when you turn the
Wheel (OK) button.)
If the pointer has not been used for a certain period of time or
Magic Remote is placed on a at surface, then the pointer will
disappear.
If the pointer is not responding smoothly, you can reset the pointer
by moving it to the edge of the screen.
The Magic Remote depletes batteries faster than a normal remote
due to the additional features
Precautions to take when using the
magic remote
Licenses
Supported licenses may di er by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an
o cial DivX Certi ed® device that has passed rigorous testing to verify that it plays DivX video. Visit divx com for
more information and software tools to convert your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi ed® device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete your registration.
17
Troubleshooting
Specifications
Cannot control the TV with the remote control.
Wireless module speci cation
ENGLISH
Check the remote control sensor on the product and try again.
Check if there is any obstacle between the product and the remote
control.
Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
Because band channel used by the country could be di erent, the
user can not change or adjust the operating frequency and this
product is set for the regional frequency table.
This device should be installed and operated with minimum
distance 20 cm between the device and your body. And this phrase
is for the general statement for consideration of user environment.
Check if the product is turned on.
Check if the power cord is connected to a wall outlet.
Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
0197
Check the power control settings. The power supply may be
interrupted.
Check if the Automatic standby (Depending on model) Sleep
Timer Power O is activated in the Timers settings.
If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI ), No signal or Invalid Format is
displayed.
Turn the TV o /on using the remote control.
Reconnect the HDMI cable.
Restart the PC with the TV on.
(Only UF77**, UF85**, UF86** etc)
Wireless module (LGSBW41) speci cation
Wireless LAN
Bluetooth
Standard
IEEE 802.11a/b/g/n
Standard
Bluetooth
Version 4.0
Frequency
Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for
Non EU)
Frequency
Range
2400 to
2483.5 MHz
Output
Power
(Max.)
10 dBm or
Lower
Output
Power
(Max.)
0197
802.11a: 13 dBm
802.11b: 15 dBm
802.11g: 14 dBm
802.11n - 2.4GHz: 16 dBm
802.11n - 5GHz: 16 dBm
(Only UF95**)
Wireless module (LGSBW51) speci cation
Wireless LAN
Standard
IEEE 802.11a/b/g/n/ac
Standard
Bluetooth
Version 4.0
Frequency
Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for
Non EU)
Frequency
Range
2400 to
2483.5 MHz
Output
Power
(Max.)
10 dBm or
Lower
Output
Power
(Max.)
18
Bluetooth
802.11a: 14.5 dBm
802.11b: 14 dBm
802.11g: 13 dBm
802.11n - 2.4GHz: 14 dBm
802.11n - 5GHz: 15.5 dBm
802.11ac - 5GHz : 16 dBm
CI Module1 (W x H x D)
Operating
Temperature
0 °C to 40 °C
Operating
Humidity
Less than 80 %
Storage
Temperature
-20 °C to 60 °C
Storage
Humidity
Less than 85 %
ENGLISH
Environment
condition
100.0 mm x 55.0 mm x 5.0 mm
1 Only Satellite models.
Digital TV
(Depending on
Country)
Analogue TV
(Depending on
Country)
Television
system
DVB-T/T21
DVB-T/T2/C/S/S22
PAL B/B, PAL B/G,
PAL D/K, PAL-I,
SECAM B/G,
SECAM D/K, NTSC-M
Programme
coverage
VHF, UHF
C-Band2, Ku-Band2
VHF, UHF, CATV
External
antenna
impedance
75
1 Only DVB-T2 support models. Despite DVB-T2 Model, DVB-T/T2 does
not apply in Philippines.
2 Only DVB-T2/C/S2 support models.
19
(Only DTV)
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
MODEL
SERIAL
IN020222
Download PDF

advertising