LG | 60PG60UR | LG 60PG60UR Owner’s Manual

ENGLISH
LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS
32LG6***
37LG6***
42LG6***
47LG6***
42LG7***
47LG7***
52LG7***
32LG8***
42LG8***
PLASMA TV MODELS
50PG3***
42PG6***
50PG6***
60PG6***
50PG7***
60PG7***
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
ACCESSORIES
ACCESSORIES
Ensure that the following accessories are included with your TV.
If an accessory is missing, please contact the dealer where you purchased the product.
■ Image shown may differ from your TV.
Owner's
Manual
Owner’s manual
TV
IN
ME
NU
Power Cord
1
T
MU
TE
MO
DE
*Lightly wipe any stains or fingerprints on the
surface of the TV with the polishing cloth.
P
2
4
3
5
7
6
8
9
0
TI
M
E
PU
OK
AV
FA
V
IN
DE
X
DV
D
RE
TU
RN
Owner’s Manual
LIS
T
Q.VIE
W
SI
ZE
UP
DA
TE
HO
LD
RE
VE
AL
TE
XT
Do not use excessive force. This may
cause scratching or discolouration.
PI
P
Batteries
Polishing Cloth
Polishing cloth for use on the screen
This feature is not available for all models.
PO
W
ER
S
Q. TB
ME
NU
Remote Control
PLASMA TV models
Cable management clip
(except
(only 50/60PG6***, (only 50PG3***)
50PG3***)
50/60PG7***)
(only 42PG6***)
Cable Holder
42PG6***: 1EA
50PG3***: 2EA only
4-bolts for stand assembly
Refer to p. 10
Only 50PG3***,
50/60PG7***
protection cover
(Refer to p.10)
or
Ferrite Core
Only 50PG3***, 50/60PG7***
Use of ferrite core
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
LCD TV models
Only 32/37/42/47/52LG6***
Cable management clip
(Refer to p.15)
(only 42LG6***)
(only 32/37LG6***)
Protection cover
(Refer to p.12)
32LG6***: 3EA
37LG6***: 4EA
4EA
2EA
1EA
4EA
bolts for stand assembly (Refer to p. 11)
Only 42/47/52LG7***, 32/42LG8***
(32LG8*** only)
(42LG7***, 32/42LG8*** only)
or
x4
x4
Bolts for stand assembly
(Refer to p.12)
Protection cover
(Refer to p.12)
1-screw for stand fixing
(Refer to p.9)
1
CONTENTS
A C C E S S O R I E S .....................................................1
CONTENTS
PREPARATION
Front Panel Controls................................................. 4
Back Panel Information ............................................ 7
Attaching the TV to a desk ..................................... 9
Stand Installation..................................................... 10
Back Cover for Wire Arrangement ....................... 13
Please set it up carefully so the product
does not fall over. .....................................................16
Desktop Pedestal Installation ............................... 17
Wall Mount: Horizontal installation..................... 17
Antenna Connection............................................... 18
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .......................................................19
DVD Setup .................................................................... 22
VCR Setup..................................................................... 25
Other A/V Source Setup .......................................... 28
External Stereo............................................................. 29
AV Output Setup ........................................................ 30
PC Setup .........................................................................31
- Screen Setup for PC Mode................................34
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ..................................38
Turning on the TV....................................................... 40
Programme Selection ................................................. 40
Volume Adjustment......................................................40
Quick Menu................................................................... 41
On Screen Menus Selection and Adjustment ......42
Auto Programme Tuning............................................ 43
Manual Programme Tuning....................................... 44
Fine Tuning .....................................................................45
Assigning a Station Name..........................................46
Booster............................................................................47
Programme Edit ........................................................... 48
2
Favourite Programme .................................................. 49
Selecting the Programme List.................................. 50
.................................................................. 51
Key lock.......................................................................... 53
AV Mode.........................................................................54
TO USE THE USB DEVICE
When connecting the USB device ...........................55
Photo List........................................................................56
Music List........................................................................58
Movie List .........................................................................60
Divx Registration Code ...................................................62
PICTURE CONTROL
Watching PIP(Picture-in-Picture) .............................63
Picture Size (Aspect Ratio)Control.........................64
Preset Picture Settings
- Picture Mode-Preset............................................66
- Auto Colour Tone Control(Cool/Medium/Warm)67
Manual Picture Adjustment
- Picture Mode-User Option................................68
- Colour Tone - User Option...............................69
- Picture Improvement Technology...................70
Advanced - Gamma......................................................71
Advanced - Film Mode/Real Cinema.......................72
Advanced - Black(Darkness) Level...........................73
Eye Care ..........................................................................74
Advanced-TruMotion ...................................................75
Picture Reset ..................................................................76
TruMotion Demo ..........................................................77
Power Indicator..............................................................78
Image Sticking Minimization(ISM) Method...........79
Power Saving Picture Mode .......................................80
Factory Reset .................................................................81
SOUND & LANGUAGE CONTROL
CONTENTS
Auto Volume Leveler ....................................................82
Preset Sound Settings - Sound Mode ....................83
Sound Setting Adjustment - User Mode ...............84
Balance ............................................................................85
TV Speakers On/Off Setup .......................................86
Selecting Audio Out ....................................................87
I/II
- Stereo/Dual Reception....................................... 88
- NICAM Reception ....................................................... 89
- Speaker Sound Output Selection.................... 89
On-Screen Menu Language Selection ...................... 90
TIME SETTING
Clock Setup....................................................................91
Auto On/Off Timer Setting .......................................92
Sleep Timer Setting......................................................93
Auto Shut-off Setting ..................................................94
TELETEXT
Switch On/Off .............................................................95
SIMPLE Text....................................................................95
TOP Text .........................................................................96
FASTEXT .........................................................................96
Special Teletext Functions..........................................97
APPENDIX
Troubleshooting............................................................98
Maintenance ...............................................................100
Product Specifications ..............................................101
Programming the Remote Control ...................... 103
IR Codes ..................................................................... 105
External Control Through RS-232C ................... 107
3
PREPARATION
FRONT PANEL CONTROLS
■
■
This is a simplified representation of the front panel. Image shown may differ from your TV.
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
PREPARATION
Plasma TV Models
Remote Control Sensor
POWER
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
MENU
INPUT
INPUT
P
OK
MENU
INPUT
P
OK
MENU
INPUT
P
OK
MENU
OK
VOLUME
PROGRAMME
Swivel Stand
This feature is not available for all models.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
4
LCD TV Models
32/37/42/47LG6***
P
PROGRAMME
PREPARATION
VOLUME
OK
OK
MENU
Intelligent Sensor
MENU
Adjusts picture according to the
surrounding conditions
INPUT
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates White when the TV is switched on.
Note: You can adjust Power Indicator in the Option menu.
42/47/52LG7***
P
VOLUME
Intelligent Sensor
Adjusts picture according to the
surrounding conditions.
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the
Option menu.
Remote Control Sensor
POWER
PROGRAMME
OK
MENU
INPUT
OK
MENU
INPUT
5
32/42LG8***
PREPARATION
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the
Option menu.
INPUT
POWER
6
INPUT
MENU
MENU
P
OK
OK
VOLUME
PROGRAMME
BACK PANEL INFORMATION
■
This is a simplified representation of the back panel. Image shown may differ from your TV.
Plasma TV Models
3
PREPARATION
USB Input
HDMI Input
Connect a HDMI signal to
HDMI IN.
S-Video Input
Connect S-Video out
from an S-VIDEO device.
7
Audio/Video Input
Connect audio/video
output from an external
device to these jacks.
AV IN 2
50PG3***, 50/60PG7***
42/50/60PG6***
2
8
RS-232C IN
(CONTROL)
HDMI/DVI IN
1
HDMI IN
RS-232C IN
L/MONO
L/
MONO
2
L/MONO AUDIO
AUDIO
R
AUDIO
VIDEO
AV
VARIABLE AUDIO OUT
COMPONENT IN
ANTENNA
IN
5
1
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
2
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
3
4
R
1
OUT
4
AUDIO
(RGB/DVI)
Audio/Video Input (AV IN 1)
Connect audio/video output from an external
device to these jacks.
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
AV IN 1
6
RGB IN (PC)
VIDEO
AUDIO
(RGB/DVI)
3
IN 1
HDMI IN
2
AV IN 2
RGB(PC)
2
VIDEO
1
RGB IN
HDMI/DVI IN
2
3
8
(CONTROL)
VARIABLE AUDIO OUT
1
1
2
1
VIDEO
AV OUT
4
AV INAUDIO
2
COMPONENT IN
5
ANTENNA
IN
6
5
Component Input
Connect a component video/audio device to
these jacks.
6
Antenna Input
Connect RF antenna to this jack.
7
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
8
RS-232C Input (CONTROL) Port
Connect the serial port of the control devices to
the RS-232C jack.
(This feature is not available for all models.)
7
PREPARATION
42/47LG6***, 42/47/52LG7***
32/37LG6***
LCD TV Models
3
USB Input
HDMI Input
Connect a HDMI signal
to HDMI IN.
PREPARATION
S-Video Input
Connect S-Video out
from an S-VIDEO device.
Audio/Video Input
Connect
AV IN 2audio/video
output from an external
device to these jacks.
AV IN
7 2
7
AV IN 2
AV IN 2
AV IN 2
A
AV IN 2
AV IN 2
42/47/52LG7***
1
2
1
HDMI IN
1
2
(RGB/DVI)
VIDEO
VIDEO
L/MONO AUDIO
R
L/MONO
L/
MONO AUDIO
R
AV
OUT
4
VARIABLE AUDIO OUT
VARIABLE AUDIO OUT
L/MONO AUDIO
AUDIO
RGB (PC)
2
1
2
IN
2
VIDEO
VIDEO
L/MONO
L/
MONO AUDIO
R
L/MONO AUDIO
ANTENNA
IN
VARIABLE
AUDIO OUT
OUT
1
AUDIO
4
5
VARIABLE
AUDIO OUT
VIDEO
VARIABLE
AUDIO OUT
6
R
COMPONENT IN
5
USB
SERVICE ONLY
L(MONO) AUDIO
USB Input
(Service only)
R
7
VARIABLE AUDIO OUT
5
1
COMPONENT
IN
HDMI IN
2
AUDIO
2
RGB IN
HDMI/DVI IN
1
(RGB/DVI)
AV IN 2
AUDIO
RGB(PC)
3
AV
VIDEO
L(MONO)
L(
MONO) AUDIO
VIDEO
IN
R
8
1
VARIABLE AUDIO OUT
2
OUT
4
S-Video Input
Connect S-Video out
from an S-VIDEO device.
6
ANTENNA
IN
VIDEO
L/MONO AUD
1
AUDIO
32/42LG8***
VIDEO
1
R
IN 1
2 ANTENNA
VIDEO
HDMI IN
(RGB/DVI)
3
AV
IN 1
2
1
VIDEO
COMPONENT IN
3
HDMI/DVI
IN
2
1
AUDIO
RGB (PC)
2
RGB IN
HDMI/DVI IN
1
RGB IN
32/37/42/47LG6***
Audio/Video Input
Connect audio/video
output from an external
device to these jacks.
ANTENNA
IN
6
VARIABL
AUDIO O
1
2
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
3
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
4
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
5
Component Input
Connect a component video/audio device to
these jacks.
6
Antenna Input
Connect RF antenna to this jack.
7
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
PREPARATION
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
(HDMI IN 3 is available for 42/47LG6***,
42/47/52LG7***)
ATTACHING THE TV TO A DESK (Only 32LG8***)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached screw.
Stand
1-Screw
(provided as parts of the product)
Desk
! WARNING
G
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
9
PREPARATION
STAND INSTALLATION
■
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened.
(If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with
excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
PREPARATION
only 42PG6***
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
Not Using the Desk-type Stand
■
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover for desk-type stand installation.
Insert the PROTECTION COVER into the TV until
clicking sound.
10
Plasma TV models
only 32/37/42LG6***
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the S t a n d B o d y with
C o v e r B a s e of the TV.
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
PREPARATION
1
32LG6***
Stand Body
Cover Base
37LG6***
Stand Body
Cover Base
42LG6***
Stand Body
Cover Base
11
only 42LG7***, 32/42LG8***
PREPARATION
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
3
Assemble the TV as shown.
2
Assemble the parts of the S t a n d B o d y with
the C o v e r B a s e of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Cover Base
Not Using the Desk-type Stand
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
Image shown may differ from your TV.
■
32/37/42/47LG6***
After removing the protection paper from the
protection cover, adhere it to the TV as shown.
12
42/47/52LG7***, 32/42LG8***
Insert the P R O T E C T I O N C O V E R into the TV
until clicking sound.
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
42PG6***
1
Connect the cables as necessary.
To connect additional equipment, see the
E x t e r n a l E q u i p m e n t S e t u p section.
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE MANAGEMENT CLIP
Connect the cables as necessary.
To connect additional equipment, see the
E x t e r n a l E q u i p m e n t S e t u p section.
2
PREPARATION
1
50/60PG6***, 50/60PG7***
Install the C A B L E M A N A G E M E N T C L I P as shown.
Fix the C a b l e H o l d e r
as shown and bundle
the cables.
CABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
42PG6***
50/60PG6***, 50/60PG7***
Separate CABLE MANAGEMENT from TV by
pressing two latches.
* For the 42PG6*** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it.
! NOTE
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
G
13
PREPARATION
■
Image shown may differ from your TV.
50PG3***
PREPARATION
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
2
Install the CABLE MANAGEMENT CLIP as
shown.
If your TV has the CABLE HOLDER, install it
as shown and bundle the cables.
CABLE HOLDER
CABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
! NOTE
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
14
32/37/42/47LG6***
Align the hole with the tab on the C A B L E
M A N A G E M E N T C L I P.
Turn the C A B L E M A N A G E M E N T C L I P as
shown.
Note: This cable management can be broken
by excessive pressure.
1
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the manual.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
PREPARATION
1
42/47/52LG7***, 32/42LG8***
CABLE MANAGEMENT CLIP
2
Connect the cables as necessary.
To connect additional equipment, see the E x t e r n a l
E q u i p m e n t S e t u p section.
3
Fit the C A B L E M A N A G E M E N T C L I P as
shown.
15
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT
FALL OVER.
You should purchase necessary components to fix the TV to the wall on the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
PREPARATION
A
1
1
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with bolts to the wall.
Ensure that both brackets are even.
3
3
Use a strong cord to secure the TV.
Secure the cord in such a way that it becomes taught when the TV is in position.
! NOTE
G
G
G
16
When moving the TV undo the cords first.
Use a platform or cabinet string and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
■
■
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Power Supply
Circuit breaker
PREPARATION
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible,
have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV .
4 inches
4 inches
4 inches
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you
use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
17
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
■
PREPARATION
AV 1
Wall
Antenna
Socket
AV 2
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA
IN
AV 1
RF Coaxial Wire (75 ohm)
ANTENNA
IN
AV 2
ANTENNA
IN
Outdoor
Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
ANTENNA
IN
VHF
■
■
18
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
■
■
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42/50/60PG6*** models.
Image shown may differ from your TV.
HD RECEIVER SETUP
Connecting with a component cable
2
1
Connect the video outputs (Y, PB, PR) of the digital TV
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
C o m p o n e n t 2 input source.
1
COMPONENT IN
1
2
HDMI/DVI
HDMI
DVI ININ
1
HDMI IN
IN
HDMI
2
EXTERNAL EQUIPMENT SETUP
2
AUDIO
VIDEO
HDMI1/DVI, HDMI2, HDMI3(except
32/37LG6***, 32/42LG8***)
No
Signal
Component
480i/576i
Yes
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
1080p
Yes
(50Hz, 60Hz only)
Yes
(24Hz, 30Hz, 50Hz, 60Hz)
19
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
HDMI/DVI
HDMI
DVI ININ
1
1
Connect the HDMI output of the digital set-top box to
the H D M I / D V I I N 1 , H D M I I N 2 or H D M I I N
3 (except 32/37LG6***, 32/42LG8***) jack on the TV.
HDMI IN
IN
HDMI
2
IN 1
EXTERNAL EQUIPMENT SETUP
VIDEO
L/MONO AUDIO
R
AV
OUT
2
Select H D M I 1 / D V I , H D M I 2 or H D M I 3(except
32/37LG6***, 32/42LG8***) input source using the
I N P U T button on the remote control.
VARIABLE AUDIO OUT
1
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
! NOTE
TV can receive the video and audio signal simultaneously with using a HDMI cable.
G If the digital set-top box supports Auto HDMI function, the output resolution of the source device will
be automatically TV to 1280x720p.
G If the digital set-top box player does not support Auto HDMI, you need to TV the output resolution
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
(42/47LG6***, 42/47/52LG7***, 50PG3***, 50/60PG7*** : 1920x1080i/1080p)
G
20
Connecting with a HDMI to DVI cable
RS-232C IN
(CONTROL)
HDMI/DVI
HDMI
DVI ININ
RGB(PC)
AUDIO
(RGB/DVI)
RGB IN
HDMI IN
1
AV
VIDEO L/MONO AUDIO
R
OUT
VARIABLE AUDIO OUT
1
2
1
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the TV.
2
Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the TV.
3
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4
Select H D M I 1 / D V I input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP
IN 1
! NOTE
G
G
G
HDMI2, HDMI3(except 32/37LG6***, 32/42LG8***) source does not support DVI source.
If the set-top box has a DVI output and no HDMI output, a separated audio connection is necessary.
If the set-top box does not support Auto DVI, you need to set the output resolution appropriately.
21
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
AUDIO
VIDEO
EXTERNAL EQUIPMENT SETUP
1
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
COMPONENT IN
1
4
Select C o m p o n e n t 1 input source using the I N P U T button on
the remote control.
If connected to C O M P O N E N T I N 2, select C o m p o n e n t 2
input source.
5
Refer to the DVD player's manual for operating instructions.
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
22
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
HDMI/DVI
HDMI
DVI ININ
1
HDMI IN
IN
HDMI
2
1
Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the TV.
2
Connect the audio outputs of the DVD to the A U D I O
input jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select A V 2 input source using the I N P U T button on
the remote control.
5
Refer to the DVD player's manual for operating
instructions.
S-VIDEO
L
R
ANT IN
3
VIDEO
OUTPUT
SWITCH
1
ANT OUT
2
EXTERNAL EQUIPMENT SETUP
DVI
VI ININ
Connecting with a S-Video cable
AV IN 2
HDMI IN
IN
HDMI
2
HDMI DVI IN
HDMI IN
23
EXTERNAL EQUIPMENT SETUP
Connecting with a HDMI cable
1
EXTERNAL EQUIPMENT SETUP
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 , H D M I I N 2 or H D M I I N
3 (except 32/37LG6***, 32/42LG8***) jack on the TV.
HDMI IN
IN
HDMI
2
IN 1
2
Select H D M I 1 / D V I , H D M I 2 or H D M I 3(except
32/37LG6***, 32/42LG8***) input source using the
I N P U T button on the remote control.
AV
VIDEO L/MONO AUDIO
R
OUT
VARIABLE AUDIO OUT
3
Refer to the DVD player's manual for operating
instructions.
! NOTE
The TV can receive video and audio signals simultaneously when
using a HDMI cable.
G If the DVD player supports Auto HDMI function, the output resolution of the source device will be automatically TV to 1280x720p.
G If the DVD player does not support Auto HDMI, you must TV the
output resolution appropriately.
To get the best picture quality, adjust the output resolution of the
source device to 1280x720p.
(42/47LG6***, 42/47/52LG7***, 50PG3***, 50/60PG7*** :
1920x1080i/1080p)
G
24
HDMI/DVI
HDMI
DVI ININ
1
1
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed
images on the sides of the screen may remain visible.
■
DVI IN
HDMI IN
Connecting with a RF cable
R
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
L
AUDIO
ANTENNA
IN
R
2
Wall Jack
EXTERNAL EQUIPMENT SETUP
L/MONO AUDIO
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for
viewing.
25
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
HDMI DVI IN
HDMI IN
IN 1
EXTERNAL EQUIPMENT SETUP
VIDEO L/MONO AUDIO
AV
R
OUT
VARIABLE AUDIO OUT
1
S-VIDEO
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
ANT OUT
1
V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow,
Connect the A U D I O/V
Audio Left = white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3
Select A V 1 input source using the I N P U T button on the remote control.
If connected to A V I N 2, select A V 2 input source.
! NOTE
G
26
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack
of the TV.
Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the TV. The picture quality is
improved; compared to normal composite (RCA cable)
input.
Connect the audio outputs of the VCR to the A U D I O
input jacks on the TV.
3
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
4
Select A V 2 input source using the I N P U T button on
the remote control.
S-VIDEO
L
R
ANT IN
OUTPUT
SWITCH
1
ANT OUT
2
EXTERNAL EQUIPMENT SETUP
2
VIDEO
3
1
AV IN 2
! NOTE
G
If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can
be received.
27
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
EXTERNAL EQUIPMENT SETUP
L
R
3
VIDEO
1
AV IN 2
28
1
V I D E O jacks between TV and external equipment. Match the jack colours.
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V 2 input source using the I N P U T button on the remote control.
If connected to A V I N 1, select A V 1 input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
HDMI DVI IN
HDMI IN
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a sub-woofer
to your surround sound system.
AV
VIDEO L/MONO AUDIO
R
OUT
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
VARIABLE AUDIO OUT
1
! NOTE
G
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
(G p . 8 6)
Select V a r i a b l e O u t in A u d i o menu to connect the
V A R I A B L E A U D I O O U T jacks.(G p . 8 7)
EXTERNAL EQUIPMENT SETUP
1
Connect the input jack of the stereo amplifier to the
V A R I A B L E A U D I O O U T jacks on the TV.
29
EXTERNAL EQUIPMENT SETUP
HDMI DVI IN
HDMI DVI IN
HDMI IN
HDMI IN
AV OUTPUT SETUP
The TV has a special signal output capability which allows you
to hook up the second TV or monitor.
AV
VIDEO L/MONO AUDIO
R
OUT
VARIABLE AUDIO OUT
EXTERNAL EQUIPMENT SETUP
30
1
Connect the second TV or monitor to the TV’s AV OUT
jacks.
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
1
! NOTE
G
G
Component, RGB, HDMI input sources cannot be used for
AV out.
We recommend to use the AV OUT jacks for VCR recording.
S-VIDEO
VIDEO
L
R
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
HDMI IN
RGB(PC)
AUDIO
(RGB/DVI)
IN 1
AV
VIDEO L/MONO AUDIO
R
OUT
VARIABLE AUDIO OUT
1
RGB OUTPUT
2
HDMI/DVI
HDMI
DVI ININ
1
HDMI IN
EXTERNAL EQUIPMENT SETUP
RGB IN
HDMI DVI IN
AUDIO
1
Connect the RGB output of the PC to the R G B( P C) jack on the TV.
2
Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV.
4
Select R G B P C input source using the I N P U T button on the remote control.
31
EXTERNAL EQUIPMENT SETUP
! NOTE
To enjoy vivid picture and sound, connect the PC
to the TV.
G Avoid keeping a fixed image on the TV ’s screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
G Connect the PC to the RGB (PC) port of the TV;
change the resolution output of PC accordingly.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate
or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
G
EXTERNAL EQUIPMENT SETUP
32
The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G If the resolution of PC is over SXGA, there will
be no picture on the TV.(only HD Models)
G Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
G
Supported Display Resolution
Plasma TV models
HDMI-DTV mode
RGB-PC mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
720x400
640x480
800x600
1024x768
1280x768
1360x768
1366x768
1280x1024
1920x1080
31.468
31.469
31.469
37.879
48.363
47.776
47.720
47.7
63.668
66.587
70.09
70.09
59.94
60.317
60.004
59.87
59.799
60
59.895
59.934
720x480
31.47
31.50
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.125
59.94
60.00
50.00
1920x1080p
67.432
67.5
56.250
27
33.75
59.94
60
50
24
30
Only 50/60PG7***, 50PG3***
Only 50/60PG6***
EXTERNAL EQUIPMENT SETUP
Resolution
LCD TV models
HDMI-DTV mode
RGB-PC mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
720x400
640x480
800x600
1024x768
1280x768
1360x768
1366x768
1280x1024
1920x1080
31.468
31.469
31.469
37.879
48.363
47.776
47.720
47.7
63.668
66.587
70.09
70.09
59.94
60.317
60.004
59.87
59.799
60
59.895
59.934
720x480
31.47
31.50
59.94
60.00
720x576
31.25
50.00
1280x720
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.125
59.94
60.00
50.00
1920x1080p
67.432
67.5
56.250
27
33.75
59.94
60
50
24
30
Only 42/47LG6***, 42/47/52LG7***
33
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image
instability. After adjustment, if the image is still not correct, your
TV is functioning properly but needs further adjustment.
OK
RETURN
EXTERNAL EQUIPMENT SETUP
Auto configure
AV MODE
FAV
P
This function is for automatic adjustment of the screen position,
clock, and phase. The displayed image will be unstable for a few
seconds while the auto configuration is in progress.
MUTE
Picture
1
2
Press the M E N U button and then use
select the P i c t u r e menu.
Press the
S c r e e n.
button and then use
/
/
Picture Mode
Colour Temperature
button to
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DE F G
OK RETURN
1
3
4
Press the
button and then use
A u t o C o n f i g ..
Press the
/
button to select
button to start A u t o C o n f i g..
• When Auto config. has finished, OK will be shown on
screen.
• If the position of the image is still not correct, try Auto
adjustment again.
Picture
Picture Mode
Colour Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
G
To Set
OK RETURN
2
Screen
Auto config.
Config.
Auto
Manual Config.
XGA Mode
Reset
G
To Set
• If picture needs to be adjusted again after Auto adjustment
in RGB (PC), you can adjust the M a n u a l C o n f i g ..
DE F G
5
34
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
OK RETURN
3 4
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Manual Config. (RGB [PC] mode only)
- Adjustment for screen Phase, Clock, Position
OK
If the picture is not clear after auto adjustment and especially if
characters are still trembling, adjust the picture phase manually.
RETURN
EXTERNAL EQUIPMENT SETUP
It’s not available to use Phase, Clock function in
COMPONENT (480i/480p/576i/576p/720p/1080i/1080p),
HDMI (480p/576p/720p/1080i/1080p).
AV MODE
FAV
P
MUTE
C l o c k This function is to minimize any vertical bars or stripes
visible on the screen background the horizontal screen
size will also change.
P h a s e This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Picture
Picture Mode
Colour Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
1
Press the M E N U button and then use
select the P i c t u r e menu.
/
button to
DE F G
OK RETURN
1
2
3
Press the
S c r e e n.
button and then use
/
button to select
Picture
Picture Mode
Colour Temperature
Press the
button and then use
M a n u a l C o n f i g ..
/
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
Screen
DE F G
4
G
To Set
OK RETURN
Press the button and then use / button to select
P h a s e, C l o c k, H - P o s i t i o n or V - P o s i t i o n.
2
Screen
5
Press the
6
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu
screen.
/
button to make appropriate adjustments.
Auto config.
ManualConfig.
Config.
Manual
XGA Mode
Reset
DE F G
G
Phase
Clock
H-Position
V-Position
51
50
50
50
OK RETURN
3 4 5
35
EXTERNAL EQUIPMENT SETUP
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Selecting XGA mode (except 42PG6***)
To view a normal picture, match the resolution of RGB mode
and selection of XGA mode.
OK
RETURN
This function works in the following mode: RGB[PC] mode.
AV MODE
EXTERNAL EQUIPMENT SETUP
FAV
P
MUTE
Picture
1
Press the M E N U button and then use
select the P i c t u r e menu.
/
Picture Mode
Colour Temperature
button to
Advanced
Aspect Ratio
Picture Reset
Screen
2
Press the
S c r e e n.
button and then use
/
button to select
DE F G
OK RETURN
1
3
4
Press the
button and then use
X G A M o d e.
Press the
button and then use
the desired XGA resolution.
/
button to select
Picture
Picture Mode
Colour Temperature
/
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
Screen
DE F G
To Set
G
OK RETURN
2
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu
screen.
Screen
Auto config.
Manual Config.
XGA Mode
Mode
XGA
Reset
G
1024x768
1280x768
1360x768
1366x768
* except 50/60PG6***
DE F G
OK RETURN
3 4
36
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Initializing
(Reset to original factory settings)
OK
This function operates in current mode.
To initialize the adjusted value
RETURN
AV MODE
EXTERNAL EQUIPMENT SETUP
FAV
P
MUTE
Picture
1
2
Press the MENU button and then use
select the P i c t u r e menu.
Press the
S c r e e n.
button and then use
/
/
Picture Mode
Colour Temperature
button to
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DE F G
OK RETURN
1
3
Press the
R e s e t.
button and then use
/
button to select
Picture
Picture Mode
Colour Temperature
4
Press the
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
button.
Advanced
Aspect Ratio
Picture Reset
Screen
Screen
DE F G
To Set
G
OK RETURN
2
Screen
Auto config.
Manual Config.
XGA Mode
Reset
Reset
DE F G
G
To Set
OK RETURN
3 4
37
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
1
TV
POWER INPUT
1
DVD
STB
Q. MENU MENU
MODE Selects the remote operating modes.
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
WATCHING TV / PROGRAMME CONTROL
Q. MENU Select the desired quick menu source.
OK
RETURN
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
AV MODE
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.
FAV
P
MUTE
1
2
RETURN Allows the user to move return one step in an interactive application or other user interaction function.
Enter to the
mode.
3
4
5
6
7
8
9
LIST
0
Q.VIEW
AV MODE It helps you select and set images and sounds when
connecting AV devices.
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
TIME
SIZE
UPDATE REVEAL
INDEX
HOLD
TEXT
PIP Switches the sub picture PIP, DW mode.
38
PIP
TV
POWER INPUT
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
Right)
DVD
STB
OK Accepts your selection or displays the current mode.
Q. MENU MENU
VOLUME UP Adjusts the volume.
/DOWN
OK
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
RETURN
AV MODE
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme list.
FAV
Q.VIEW Returns to the previously viewed programme.
P
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
TIME
SIZE
UPDATE REVEAL
INDEX
HOLD
TEXT
VCR/DVD Controls some video cassette recorders or DVD players.
control buttons Control connected AV devices by pressing the / /
/ , OK buttons and buttons for G, A, l l, FF and GG.
(The Ô button does not provide such functions.)
WATCHING TV / PROGRAMME CONTROL
FAV Displays the selected favourite programme.
Installing Batteries
PIP
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
39
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
■
In standby mode to turn TV on, press the
, I N P U T, P D / E( or
P / ) button on the TV or press the P O W E R, T V, I N P U T, P
9 ) buttons on the remote control and the TV will
/ , N U M B E R ( 0~9
switch on.
WATCHING TV / PROGRAMME CONTROL
Installation Guide
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, L o c a t i o n, A u t o T u n i n g.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. “In-Store” mode is only for shop display and not for general customer use.
c. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
d. "In-Store" mode is the optimal setting for store environments. If a user modifies image quality data,
“In-Store” mode initializes the product to the image quality set by us after a certain period of time.
e. The mode (Home, In-Store) can be changed by executing Factory Reset in the Option menu.
PROGRAMME SELECTION
1
Press the P
/
or N U M B E R buttons to select a programme number.
VOLUME ADJUSTMENT
40
+ / - button to adjust the volume.
1
Press the
2
If you wish to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the M U T E or
button.
+/-
QUICK MENU
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this
manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
OK
• A s p e c t R a t i o: Selects your desired picture format.
Q. MENU
Aspect Ratio
F
Power Saving
Backlight
Picture Mode
Sound Mode
Multi Audio
Programme Edit
Sleep Timer
4:3
Zoom Setting
0
0
Sport
Sport
L+R
To Set
Off
G
* Only PLASMA TV models
* Only LCD TV models
RETURN
AV MODE
FAV
P
MUTE
WATCHING TV / PROGRAMME CONTROL
For Zoom Setting, select 14:9, Zoom1 and Zoom2 in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
• P o w e r S a v i n g (only Plasma TV Models): Adjusts screen brightness to reduce the power
consumption of the set.
• B a c k l i g h t (only LCD TV Models):Adjusts screen brightness. It returns to the default
settings brightness by changing mode source.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set the sound combination which it deems the
best for the images being watched. Selects your desired Sound Mode.
• M u l t i A u d i o : Selects the sound output.
• P r o g r a m m e E d i t : Adjusts the stored programmes by delete, copy, move or skip.
• S l e e p T i m e r : Selects the sleep timer.
DEF G RETURN
1
Press the Q . M E N U button and then
display each menu.
2
Press the
3
Press the Q . M E N U button to return to normal TV viewing.
/
/
button to
button to select your desired Source.
41
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then
/
2
Press the
button to select a menu item.
3
Change the setting of an item in the sub or pull-down menu with / button.
You can move to a higher level menu by pressing the O K or M E N U button.
button and then
/
button to display each menu.
Setup
Picture
Audio
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Picture Mode
Colour Temperature
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
DE F G
OK RETURN
Setup MENU
Advanced
Aspect Ratio
Picture Reset
Screen
TruMotion Demo
DE F G
* Only 42/47/52LG7***
OK RETURN
DE F G
Audio MENU
Picture MENU
USB
Option
Time
Music List
Photo List
Movie List
DivX Reg. Code
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
DE F G
OK RETURN
USB MENU
DE F G
* Only PLASMA TV models
OK RETURN
* Only LCD TV models
OK RETURN
Option MENU
DE F G
OK RETURN
Time MENU
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it
provides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example
to help the TV operation.
c. In the teletext mode and USB mode, menus are not displayed.
42
0
AUTO PROGRAMME TUNING
POWER INPUT
TV
DVD
STB
Q. MENU MENU
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the P /
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
OK
All stations which can be received are stored by this method. It is
recommended that you use Auto tuning during installation of this TV.
RETURN
AV MODE
FAV
/
2
Press the
T u n i n g.
button and then
/
button to select A u t o
3
Press the
button and then
/
button to select S y s t e m.
4
button to select a TV system menu;
Press the /
BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
1
button to select the
MUTE
Press the
6
button or NUMBER buttons to select the iniPress the /
tial programme number. If you use NUMBER buttons, any
number under 10 is entered with a numeric ‘0’ in front of it,
0 5’ for 5.
i.e.‘0
7
Press the
8
Press the
button to begin auto tuning.
All receivable stations are stored.
/
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DE F G
OK RETURN
1
Setup
Auto
AutoTuning
Tuning
Manual Tuning
Programme Edit
Favourite Programme
To Set
G
button to select S t o r a g e F r o m.
5
/
P
button to select S e a r c h.
DE F G
OK RETURN
2
Auto Tuning
System
Storage From
Search
DE F G
To stop auto tuning, press the R E T U R N button.
When auto tuning is complete, the Programme edit menu
appears on the screen. See the Programme edit section to edit
the stored programme.
G
BG
I
DK
M
OK RETURN
3 4 5 6 7
Auto Tuning
C 05
BG
5
9
WATCHING TV / PROGRAMME CONTROL
Press the M E N U button and then
S e t u p menu.
35%
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
RETURN
Stop
8
43
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
POWER INPUT
TV
DVD
STB
Q. MENU MENU
Manual programme lets you manually tune and arrange the
stations in whatever order you desire.
OK
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then
S e t u p menu.
/
2
Press the
button to select
3
Press the
4
button or NUMBER buttons to select the
Press the /
desired programme number (0 to 99). If you use NUMBER
buttons, any number under 10 is entered with a numeric ‘0’ in
0 5’ for 5.
front of it, i.e. ‘0
button and then
M a n u a l T u n i n g.
button and then
/
button to select the
6
Press the /
button to select a TV system menu;
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
7
Press the
8
Press the
button and then
V / U H F or C a b l e.
9
Press the
10
You can select the desired programme number with the /
button or NUMBER buttons. If possible, select the programme
number directly with the number buttons. Any number under
0 5’ for 5.
10 is entered with a numeric ‘0’ in front of it, i.e. ‘0
/
FAV
MUTE
button to select S t o r a g e.
/
Press the
/
Press the
/
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
button to select S y s t e m.
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select B a n d.
/
DE F G
OK RETURN
1
button to select
button to select C h a n n e l.
Setup
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
DE F G
11
AV MODE
P
5
/
RETURN
G
To Set
OK RETURN
button to select S e a r c h.
12
Press the /
button to commence searching. If a station is
found the search will stop.
13
Press the O K button to store it.
14
To store another station, repeat steps 3 to 1 3.
15
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
99
DE
DE FFGG OK
OK RETURN
MENU
3 4 5 6 7
8 9 10 11 12
44
FINE TUNING
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Normally fine tuning is only necessary if reception is poor.
OK
RETURN
AV MODE
FAV
MUTE
Setup
1
Press the M E N U button and then
the S e t u p menu.
/
2
Press the
button and then
M a n u a l T u n i n g.
button to select
/
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DE F G
OK RETURN
1
3
Press the
button and then
4
Press the
button and then
the best picture and sound.
5
Press the O K button to store it.
/
/
button to select F i n e.
WATCHING TV / PROGRAMME CONTROL
P
Setup
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
To Set
G
button to fine tune for
DE F G
OK RETURN
2
Manual Tuning
6
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Storage
System
Band
Channel
Fine
G
F /G
Search
Name
Booster
DE
DE FFGG OK
OK RETURN
MENU
3 4 5
45
WATCHING TV / PROGRAMME CONTROL
ASSIGNING A STATION NAME
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can assign a station name up to five characters to each programme number.
OK
RETURN
AV MODE
FAV
WATCHING TV / PROGRAMME CONTROL
P
MUTE
Setup
1
Press the M E N U button and then
the S e t u p menu.
/
2
Press the
button and then
M a n u a l T u n i n g.
button to select
/
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DE F G
OK RETURN
1
Setup
button and then
button to select
3
Press the
N a m e.
4
Press the
button and then / button. You can use a
blank, + , - , the number 0 to 9 and the alphabet A to Z .
/
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
DE F G
G
To Set
OK RETURN
2
46
5
Press the / button to select the position and make
your choice of the second character, and so on.
6
Press the O K button to store it.
7
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
C 05
DE
DE FFGG OK
OK RETURN
MENU
3 4 5 6
BOOSTER
TV
POWER INPUT
DVD
STB
Q. MENU MENU
In some models, B o o s t e r is an optional function. Only a set
with B o o s t e r can perform this function.
OK
If reception is poor, select B o o s t e r to On.
When the signal is strong, select “OFF”.
RETURN
AV MODE
FAV
MUTE
1
2
3
4
5
6
Setup
1
Press the M E N U button and then
the S E T U P menu.
/
2
Press the
button and then
M a n u a l T u n i n g.
button to select
/
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DE F G
OK RETURN
1
WATCHING TV / PROGRAMME CONTROL
P
Setup
3
Press the
button and then use
4
Press the
button and then use
O n or O f f.
/
button to select
B o o s t e r.
/
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
G
To Set
button to select
DE F G
OK RETURN
2
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
Off
On
DE
DE FFGG OK
OK RETURN
MENU
3 4
47
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
POWER INPUT
TV
DVD
STB
Q. MENU MENU
This function enables you to delete or skip stored programmes.
Also you can move some stations to other programme numbers
or copy a blank station data into the selected programme number.
1
Press the M E N U button and then
the S e t u p menu.
2
Press the
button and then
P r o g r a m m e E d i t.
/
OK
RETURN
button to select
AV MODE
FAV
WATCHING TV / PROGRAMME CONTROL
/
button to select
P
MUTE
3
Press the
button to display the Programme edit menu.
Deleting a programme
1.Select a programme to be deleted with the / /
button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
A
/
Copying a programme
1.Select a programme to be copied with the / / /
button.
2.Press the GREEN button.
All the following programmes are shifted down one position.
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
TIME
SIZE
UPDATE REVEAL
INDEX
HOLD
TEXT
PIP
A
Moving a programme
1.Select a programme to be moved with the / / /
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number with
the / / / button.
4.Press the YELLOW button again to release this function.
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
A
Skipping a programme number
1.Select a programme number to be skipped with the /
button.
/ /
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped
programme.
When a programme number is skipped it means that you will
be unable to select it using the /
button during normal
TV viewing. If you wish to select the skipped programme,
directly enter the programme number with the NUMBER
buttons or select it in the programme edit or table menu.
A
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
1
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DE F G
G
To Set
OK RETURN
2
Programme Edit
0 C 03
1 BLN 03
2 C 12
3 S 66
4 S 67
5
6
7
8
9
Delete
Move
Copy
Skip
DE F G
48
1
S
S
S
C
C
69
17
22
09
11
OK RETURN
3
FAVOURITE PROGRAMME
POWER INPUT
TV
DVD
STB
Q. MENU MENU
This function lets you select your favourite programmes directly.
Repeatedly press the FAV button to select stored favourite
programmes.
OK
RETURN
AV MODE
FAV
WATCHING TV / PROGRAMME CONTROL
P
MUTE
1
Press the M E N U button and then
S e t u p menu.
/
2
Press the
button and then
F a v o u r i t e P r o g r a m m e.
button to select
3
Press the
/
button to select the
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DE F G
OK RETURN
button.
1
Setup
4
5
Press the
/
button to select - - - - - - -.
Select a desired programme with the / button or
NUMBER buttons. Any number under 10 is entered with a
0 5’ for 5.
numeric ‘0’in front of it, i.e.‘0
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DE F G
G
---------
---------------------------------
OK RETURN
2 3 4 5
6
To store another programme, repeat steps 4 to 5 .
You can store up to 8 programmes.
7
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
49
WATCHING TV / PROGRAMME CONTROL
SELECTING THE PROGRAMME LIST
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can check which programmes are stored in the memory by
displaying the programme list.
OK
RETURN
A
Displaying programme list
AV MODE
FAV
WATCHING TV / PROGRAMME CONTROL
Press the L I S T button to display the Programme list menu.
P
The programme list appears on the screen.
MUTE
One programme list contains ten programmes as shown.
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
! NOTE
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the
programme list indicate there is no station name assigned.
A
TIME
SIZE
INDEX
HOLD
UPDATE REVEAL
TEXT
PIP
Selecting a programme in the programme list
Select a programme with the / / /
button.
Then press the O K button. The TV switches to the chosen
programme number.
A
Paging through a programme list
There are 10 programme table pages in which contain 100 pro
grammes. Pressing the / / /
button repeatedly turns the
pages.
Press the L I S T button to return to normal TV viewing.
Programme List
0
C 03
5
S 69
1 BLN 03
6
S 17
2
C 12
7
S 22
3
S
66
8
C 09
4
S
67
9
C 11
F G DE
50
OK
POWER INPUT
TV
DVD
STB
Q. MENU MENU
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
OK
The product might not function properly when using it with other
products with HDMI-CEC function.
RETURN
AV MODE
This allows you to control and play other AV devices connected
to the display through HDMI cable without additional cables and
settings.
FAV
WATCHING TV / PROGRAMME CONTROL
P
MUTE
If you do not require the SIMPLINK menu, select “Off”.
1
2
Press the M E N U button and then
the O p t i o n menu.
Press the
button and then
S I M P L I N K.
/
/
button to select
button to select
3
Press the
O f f.
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
button and then
/
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
TIME
SIZE
INDEX
HOLD
UPDATE REVEAL
TEXT
PIP
Option
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
button to select O n or
DE F G
OK RETURN
1
Option
Language
SIMPLINK
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
DE F G
G
Off
On
OK RETURN
2 3
51
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
/
(The Ô button does not provide such functions)
/
, OK, G, A, l l, FF and GG buttons.
/
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
WATCHING TV / PROGRAMME CONTROL
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power On
The television set will change automatically to turn on mode, after the Player with Simplink function start to
reproduce through connection HDMI.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not
provide this function.
SIMPLINK Menu
Press the
/
/
/
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play discs. When
multiple discs are available, the titles of the discs are
conveniently displayed at the bottom of the screen.
1
3
V C R p l a y b a c k : Control the connected VCR.
3
4
H D D R e c o r d i n g s p l a y b a c k : Control recordings
stored in HDD.
4
5
Audio Out to Home theater/Audio Out to TV
: Select Home theater or TV speaker for Audio Out.
TV
2
DISC
Selected Device
VCR
When device is not
connected (displayed
in gray)
HDD Recorder
SPEAKER
TV SPEAKER
5
DE
OK
When a device is
connected (displayed
in bright colour)
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMI
terminal) of the SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with SIMPLINK function using the above
method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN
terminal on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE button on the
remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the
operation of a device controlled by SIMPLINK.
G When you select or operate a media device with home theatre function, the speaker automatically
switches to home theatre speaker (HT speaker).
G
52
KEY LOCK
TV
POWER INPUT
DVD
STB
Q. MENU MENU
The TV can be set so that the remote control is needed to
control it.
This feature can be used to prevent unauthorized viewing.
OK
This TV is programmed to remember which option it was last
set to even if you turn the TV off.
RETURN
AV MODE
FAV
MUTE
1
2
3
4
5
6
Option
1
Press the M E N U button and then
the O p t i o n menu.
/
2
Press the
L o c k.
button to select K e y
button and then
/
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
button to select
DE F G
OK RETURN
1
3
Press the
or O f f.
button and then
/
button to select O n
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
4
WATCHING TV / PROGRAMME CONTROL
P
Option
Language
SIMPLINK
Key
Key Lock
Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
DE F G
G
Off
On
OK RETURN
2 3
! NOTE
G
G
In K e y L o c k ‘O n’, if the TV is turned off, press the r / I, I N P U T, P D / E( or P / ) button on
the TV or P O W E R, I N P U T, T V, P
/ or NUMBER buttons on the remote control.
With the K e y L o c k O n, the display ‘K e y L o c k O n’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
53
WATCHING TV / PROGRAMME CONTROL
AV MODE
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can select the optimal images and sounds when connecting AV devices
to external input.
OK
RETURN
AV MODE
FAV
WATCHING TV / PROGRAMME CONTROL
Off
Cinema
MUTE
Game
1
Sport
Press the AV MODE button repeatedly to select the desired
source.
• If you select Cinema Mode in AV mode, Cinema mode will
be selected both for Picture Mode and Sound Mode in
PICTURE menu and AUDIO menu respectively.
• If you select “Off” in AV mode, the picture and image
which you initially set will be selected.
2
54
P
Press the R E T U R N button to return to normal TV viewing.
TO USE THE USB DEVICE
When connecting the USB device
When you connect a USB device, this screen is displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
1
Connect the USB device to the U S B I N jacks on
the side of TV.
2
Press the
3
Press the
4
Press the O K button.
3
button.
/
USB memory stick
button to select the desired item.
PHOTO
MUSIC
MOVIE
2 3
! NOTE
G
+ / - buttons on the TV
In USB mode, P D / E( or P / ),
are used to navigate (up/down/left/right).
AV IN 2
Precautions when using the USB device
TO USE THE USB DEVICE
Manufactured under license from Dolby
Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby
Laboratories.
1
Only a USB storage device is recognizable. Digital camera and mobile phone are not supported.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G In case of a card reader, up to one memory cards are concurrently recognizable.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music files or image files.
G Please use only a USB storage device which was formatted as a FAT32 file system provided with the Windows
operating system. In case of a storage device formatted as a different utility programme which is not supported
by Windows, it may not be recognized.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may
not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G If the name of a folder or file is too long, it will not be displayed or recognized.
G File alignment method is based on storage order in USB storage device.
G Please backup the important file because a data of USB device may be damaged. Data management is consumer's
responsibility and in consequence the manufactures does not cover the product bearing data damage.
G If the quantity of folders and files is over 1,000, it will not be displayed or recognized about exceeded files and
folders.
G It is supported for only primary partition. If there is an extended partition, it is not displayed or recognized.
G
G
55
TO USE THE USB DEVICE
PHOTO LIST
It is available to playback only the photo file(*.jpg) in the USB device.
The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Screen Components
1
1
Slide show the selected item.
2
Set the time interval of the slide
show.
3
Listen to music while viewing
photos in full size.
TO USE THE USB DEVICE
4
5
4
2 3
Photo List
List
Preview
JMJ003
Up Folder
KY102
JMJ001
JMJ002
Moves to upper level file
JMJ003
Corresponding buttons on the
remote control
1366x768
5
Move
1/1
OK
P
Move Page
RETURN
Exit
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a
USB device, on a full-sized screen. Detailed operations are
available on full-sized photo view screen.
1
Use the
2
Press the O K or
3
The selected photo is displayed in full size and show
up the menu.
/
button to select the desired photos.
button.
(Rotate) : Rotate photos.
: Display the previous photo viewing.
Next
: Display the next photo viewing.
Stop
: Stop the viewing the photos.
Hide
: Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen,
press OK button.
90°
90°
Prev
1/17
90°
4
56
Press R E T U R N button to return to TV viewing or press
button to return to the X-STUDIO menu.
■ If JPEG Viewing is operated, it should be pressed the
button after pressing the STOP button.
90° Prev
Next
Stop
Hide
The aspect ratio of a photo may change the size of
the photo displayed on the screen in full size.
* Viewing the Slide show
Photo List
Preview
1
Use the
2
Press the
3
Press the O K button.
/
button to select the desired photos.
List
Up Folder
JMJ003
KY102
JMJ001
JMJ002
JMJ003
button to select
1366x768
1/1
Move
OK
Move Page
P
RETURN
Exit
1 2
: Stop the viewing the slide show.
: Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen,
press OK button.
Stop
Hide
1/17
Stop
4
Press the
5
Use /
button to control the time interval of the
slide show.
Hide
button to select
3
Photo List
Preview
List
Up Folder
JMJ003
KY102
6
Press the O K button to store it.
TO USE THE USB DEVICE
Showing..
JMJ001
JMJ002
JMJ003
7
Press the
button to select
1366x768
8
Press the O K button to listen to music(BGM) while
viewing photos in full size.
Set the music device and album in Option.
■ You should memorize FAV list to operate this
function in MUSIC LIST.
Move
1/1
OK
P
Move Page
RETURN
Exit
4 5 6
Photo List
Preview
List
Up Folder
JMJ003
KY102
JMJ001
9
Press R E T U R N button to return to TV viewing or
press
button to return to the X-STUDIO
menu.
■ If Slideshow/BMG function is operated, it should be
pressed the
button after pressing the
STOP button.
JMJ002
JMJ003
1366x768
Move
1/1
OK
P
Move Page
RETURN
Exit
7 8
! NOTE
If it is Progressive JPEG format, some photos may be not decoded.
If you do not press any button for 4 hours during the Slide show and BGM(Back Ground Music), it will be
stopped.
If the width of resolution is over 4800, it is not supported.
When loading, some buttons may not work.
57
TO USE THE USB DEVICE
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Screen Components
1
TO USE THE USB DEVICE
1
Moves to upper level file
2
Delete All : Delete all music in
music list.
■ It is not possible to delete
only one music in music list.
Music List
G 00:00:34
List
Programme
Up Folder
KY104
KY108
JMJ009
3
Corresponding buttons on
the remote control
JMJ0010
Delete All
2
3
1
FAV
Edit
a. If you want to listen to music, use the /
button
to select music.
b. Press the O K button to play the music.
c. All music in selected folder is played, repeatedly.
OK
P
Move Page
RETURN
Exit
Music List
Program
List
G 00:00:34
Up Folder
KY104
KY108
JMJ009
2
3
58
a. If you want to listen to several music in sequence,
button to select music.
use the /
b. Press FAV button and then use O K button to
make music list.
■ When FAV button is pressed,
is displayed and
then it is possible to edit music list.
c. To make music list, repeat steps a to b.
d. Press button and then use O K button to play
music in music list.
e. Up to 30 files are stored.
Press R E T U R N button to return to TV viewing or press
button to return to the X-STUDIO menu.
■ If MP3 playing is operated, it should be pressed the
button after pressing the STOP button.
JMJ0010
JMJ0011
Delete All
FAV
Edit
OK
P
Move Page
RETURN
Exit
■
If you don't press any button for a while during
the playing, the play information box (as shown in
the below) will float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due
to an fixed image remaining on the screen for a
extended period of time.
■
If you press O K, A, RETURN buttons, screen saver is
stopped.
When music is playing,
is displayed in Back of the music title.
A music downloaded from a paid service with copyright protection does not start but displays inappropriate
information in playtime.
TO USE THE USB DEVICE
! NOTE
The FF ,GG buttons on the remote control are not available in this mode.
Customer should note that permission is required in order to download MP3 files form the internet, Our
company has no right to quarantee such permission, Permission should always be sought from the copyright
owner.
When loading, some buttons may not work.
MP3 files are supported as follows.
Sampling Frequency : 32 ~ 48kHz
Bit rate : 32 ~ 320kbps
59
TO USE THE USB DEVICE
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and Divx file.
Screen Components
TO USE THE USB DEVICE
1
Moves to upper level file
2
Corresponding buttons on
the remote control
Movie List
List
1
SA500005
SA500006
2
60
Up Folder
SA500004
Move
OK
P
Move Page
RETURN
Exit
1
Use the
2
Press the O K button to play the movie and show up the menu.
Control
button to select the desired movie titles.
ON
Language
OFF
Sync
Position
ARC
Hide
D To Set
3
Press R E T U R N button to return to TV viewing or press
If movie playing is operated, it should be pressed the
■
button to return to the X-STUDIO menu.
button after pressing the STOP button.
TO USE THE USB DEVICE
C o n t r o l : Turns the subtitle display on and off during movie play.
L a n g u a g e : Changes the Language Group of the subtitle during movie play.
P o s i t i o n : Changes the position of the subtitle either up or down during movie play.
S y n c : Adjusts the time synchronisation of the subtitle from -5 secs ~ +5 secs by
steps of 1 secs during movie play.
A R C : Adjusts the picture formats ; 4:3 or 16:9
■ To see the menu again on the full-sized screen, press OK button.
! NOTE
If you do not press any button for 10 minutes during Pause state, it will be stopped.
When loading, some buttons may not work.
DivX Audio Language & Subtitle Language
G
When DivX is playing, if you press the O K button and then select language, this message is displayed.
Subtitle Language Group
Subtitle Language
F
Latin 1
G
F
O/O
G
Audio Language
F
O/O
G
Dolby D
Press the / / /
button to select the
desired option.
Supports up to Mpeg, Mp3, PCM, Dolby D file.
61
TO USE THE USB DEVICE
DIVX REGISTRATION CODE
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Confirm the DivX registration code number of the TV. Using the registration
number, movies can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased
DivX file is not allowed. (Only DivX files matched with the registration code of
the purchased TV are playable.)
OK
RETURN
1
TO USE THE USB DEVICE
2
3
Press the M E N U button and then use
select the U S B menu.
/
Press the button and then use
D i v X R e g . C o d e.
button to select
button to
FAV
P
MUTE
Press the
/
button to start D i v X R e g . C o d e.
DivX Registration Code
: xxxxxxxx
4
AV MODE
Press the R E T U R N button to return to normal TV viewing.
1
2
3
4
5
6
USB
Music List
Photo List
Movie List
Divx
Divx Reg.
Reg. Code
Code
DE F G
G
To Set
OK RETURN
1 2 3
• Official DivX® Certified Product
• “Plays all versions of DivX® video (including DivX® 6) with standard playback of
DivX® media files”
•“DivX Certified products: “DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.”
! NOTE
Movie files are supported as follows.
Resolution : under 720x480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
Video Codec : MP 43, DIVX_3_11, DIVX_4_12, DIVX_5_0, XVID, MP4S, RMP4, MP4V, _3IVX.
62
PICTURE CONTROL
WATCHING PIP(PICTURE-IN-PICTURE)
PIP lets you view 2 different inputs (sources) on
your TV screen at the same time.
One source will be large, and the other source
will show a smaller inset image.
PIP function is available in the Component, RGB,
HDMI mode.
(For FHD models, it can support TV, AV1, AV2
mode.)
PIP
PIP
PIP
PIP
PIP
PIP
F
Input
PR
Size
Position
DEF G
PIP
TV
C 07 7
Small
G
RETURN
Watching PIP/Double Window
Press the P I P button and then press the
/
/
button to change the PIP options as shown below.
DW1 Mode
DW2 Mode
PIP Off
PICTURE CONTROL
PIP Mode
/
Programme Selection for Sub Picture
Press the P I P button and then press the
button to select a programme for the sub picture.
/ / /
The selected programme number is displayed just below the programme number of main picture.
Input Source Selection for Sub Picture
Press the P I P button and then press the
/ / /
(Sub picture can be selected only TV, AV1, AV2)
button to select the PIP Input source for the sub picture.
Sub Picture Size Adjustment (PIP mode only)
Press the P I P button and then press the
/
/
/
button to adjust the sub picture size.
Moving the Sub Picture (PIP mode only)
Press the P I P button and then press the
/
/
/
button to adjust the sub picture position.
63
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO)CONTROL
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can watch the screen in various picture formats; 1 6 : 9 , O r i g i n a l, 4 : 3,
1 4 : 9, Z o o m 1 / 2 and J u s t S c a n.
Just Scan works in the following mode:
Component (720p/1080i/1080p), HDMI (720p/1080i/1080p)
OK
RETURN
If a fixed image is displayed on the screen for a long time, that fixed image may
become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
FAV
button.
P
This function works in the following signal.
PICTURE CONTROL
1
MUTE
You can adjust Aspect Ratio in the Picture menu.
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
16:9
• Original
When your TV receives a wide screen signal it
will automatically change to the picture format to be broadcast.
• 4:3
The following selection will allow you to view a
picture with an original 4:3 aspect ration, grey
bars will appear on both the left and right hand of
the screen.
4:3
• 14:9
You can view a picture format of 14:9 or a general
TV programme in the 14:9 mode. The 14:9 screen
is viewed in the same way as in 4:3, but is magnified to the left and right.
Original
14:9
64
AV MODE
DE
• Zoom1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and
bottom of the picture will be cropped.
Zoom1
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
DE
Zoom2
PICTURE CONTROL
• Zoom2
Choose Zoom 2 when you wish the picture to
be altered, both horizontally extended and
vertically cropped. The picture adopting a
compromise between alteration and screen
converage.
DE
! NOTE
G
G
You can only select 4 : 3, 1 6 : 9 (Wide) in Component, HDMI, RGB(PC) mode.
In HDMI/Component (over 720p) mode, J u s t S c a n is available.
65
PICTURE CONTROL
PRESET PICTURE SETTINGS
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Picture Mode-Preset
OK
Picture Mode adjusts the TV for the best picture appearance.
Select the preset value in the P i c t u r e M o d e menu based on the
programme category.
RETURN
Intelligent Sensor(Only LCD TV models), Vivid, Standard, Cinema,
Sport and Game are programmed for optimum picture reproduction at
the factory and cannot be changed.
AV MODE
FAV
P
MUTE
PICTURE CONTROL
When the Intelligent Sensor function is on, the most suitable
picture is automatically adjusted according to the
surrounding conditions.(Only LCD TV models)
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Press the
button and then
P i c t u r e M o d e.
button to select
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
OK RETURN
1
3
4
Press the
button and then / button to select
I n t e l l i g e n t S e n s o r(Only LCD TV models), V i v i d ,
S t a n d a r d , C i n e m a , S p o r t , G a m e , U s e r 1 or U s e r 2.
Picture
Picture Mode
Mode
Picture
Colour Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
G
Intelligent Sensor
Vivid
Standard
Cinema
Sport
Game
User1
User2
OK RETURN
2 3
66
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Auto Colour Tone Control(Cool/Medium/Warm)
OK
To initialize values (reset to default settings), select the Cool
option.
RETURN
AV MODE
FAV
Choose one of three automatic colour adjustments. Set to
warm to enhance hotter colours such as red, or set to cool to
see less intense colours with more blue.
P
MUTE
PICTURE CONTROL
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Press the
button and then
C o l o u r T e m p e r a t u r e.
button to select
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
OK RETURN
1
3
4
Press the
button and then / button to select
either C o o l, M e d i u m, W a r m or U s e r.
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Picture
Picture Mode
Colour
Colour Temperature
Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
G
Cool
Medium
Warm
User
OK RETURN
2 3
67
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Picture Mode-User Option
Backlight
Contrast
Brightness
Colour
Sharpness
PICTURE CONTROL
Tint
OK
To control the brightness of the screen, adjust
the brightness of LCD panel.
Adjusts the difference between light and dark
levels in the picture.
Increases or decreases the amount of white in
the picture.
Adjusts intensity of all colours.
Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts the balance between red and green
levels.
RETURN
AV MODE
FAV
P
MUTE
Picture
Picture Mode
Colour Temperature
1
Press the M E N U button and then
the P i c t u r e menu.
/
2
Press the
button and then
P i c t u r e M o d e.
/
button to select
3
Press the
button and then
U s e r 1 or U s e r 2.
/
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DE F G
OK RETURN
1
4
Press the
button and then / button to select the
B a c k l i g h t(Only LCD TV modes),
desired picture option (B
C o n t r a s t, B r i g h t n e s s, C o l o u r, S h a r p n e s s and T i n t).
5
Press the
/
button to make appropriate adjustments.
Picture
Picture Mode
Mode
Picture
Colour Temperature
G
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
Intelligent Sensor
Vivid
Standard
Cinema
Sport
Game
User1
User2
OK RETURN
2 3
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
6
User1
Backlight
Contrast
Contrast
Brightness
Colour
Sharpness
Tint
50
100 G
50
50
50
0
! NOTE
G
You cannot adjust colour, sharpness and tint in the
RGB-PC mode.
DE F G
OK RETURN
4
Contrast
100
F
G
E
5
68
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Colour Tone - User Option
OK
To adjust red, green, blue to any colour temperature you prefer.
RETURN
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
Press the
button and then
C o l o u r T e m p e r a t u r e.
/
button to select
DE F G
OK RETURN
1
3
Press the
button and then
4
Press the
button and then
G r e e n or B l u e.
5
Press the
/
/
button to select U s e r.
button to select R e d,
Picture
Picture Mode
Colour
Colour Temperature
Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
/
G
Cool
Medium
Warm
User
OK RETURN
button to make appropriate adjustments.
2 3
User
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
+30
0
0
G
OK RETURN
4
E
6
Red
Green
Blue
Red
E
+30 F
G
5
69
PICTURE CONTROL
- PICTURE IMPROVEMENT TECHNOLOGY
TV
POWER INPUT
DVD
STB
Q. MENU MENU
XD is LG electronic's unique picture improving technology to
display a real HD source through an advanced digital signal
processing algorithm.
OK
It is not possible to use this function in RGB-PC mode.
RETURN
1
Press the MENU button and then
the P i c t u r e menu.
/
button to select
Picture
Picture Mode
Colour Temperature
PICTURE CONTROL
2
Press the
button and then
/
button to select X D.
3
Press the
button and then
A u t o or M a n u a l.
/
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
* Manual Selection
This menu is activated after selecting the U s e r 1 or U s e r 2 of P i c t u r e
M o d e.
Press the
button and then / button to select X D
C o n t r a s t , X D C o l o u r or X D N R.
2
Press the
button and then / button to select O f f ,
L o w or H i g h.
Select O f f, L o w, H i g h, A d a p t i v e.(only X D N R)
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Auto
Manual
2 3
Manual
Contrast
Contrast
X D C o n t r a s t : Optimises the contract automatically
according to the brightness of the reflection.
A X D C o l o u r : Adjusts the colour of the reflection
automatically to reproduce as close as possible to
natural colours.
A X D N R : Removes interference up to the point where it
does not damage the original picture.
G
OK RETURN
Colour
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
OK RETURN
1
DE F G
1
3
AV MODE
NR
G
G
Off
Low
High
A
70
DE F G
OK RETURN
1 2
ADVANCED - GAMMA
TV
POWER INPUT
DVD
STB
Q. MENU MENU
High gamma values display whitish images and low gamma
values display high contrast images.
OK
It is not possible to use this function in RGB-PC mode.
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Press the
button and then
A d v a n c e d.
button to select
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
OK RETURN
1
Picture
3
4
Press the
G a m m a.
button and then
Press the
button and then
M e d i u m or H i g h .
/
button to select
Picture Mode
Colour Temperature
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
/
button to select L o w ,
DE F G
G
To Set
OK RETURN
2 3
Advanced
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Gamma
Gamma
Film Mode
Black Level
Eye Care
DE F G
G
Low
Medium
High
OK RETURN
4
71
PICTURE CONTROL
ADVANCED - FILM MODE/REAL CINEMA
TV
POWER INPUT
DVD
STB
Q. MENU MENU
To set the TV up for the best picture quality for viewing
films.
OK
This feature operates only in Analog TV, AV, S-video and
Component 480i/576i mode.(Film Mode only)
RETURN
In HDMI mode(1080p 24Hz). (42/47/52LG7*** only)
Screen
TruMotion
Real Cinema
5:5 Pull-Down
Off
On
Picture
Picture Mode
Colour Temperature
PICTURE CONTROL
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
1
Press the M E N U button and then
/
Press the
button and then
1
Picture
Picture Mode
Colour Temperature
button to select A d v a n c e d.
/
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
3
Press the
button and then
/
G
OK RETURN
2 3
Advanced
Gamma
Film Mode
Mode
Film
G
Black Level
Eye Care
4
Press the
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
/
To Set
button to select F i l m
M o d e or R e a l C i n e m a(42/47/52LG7*** only).
button and then
OK RETURN
button to select
the P i c t u r e menu.
2
AV MODE
Off
On
button to select O n or O f f .
DE F G
OK RETURN
4
(42/47/52LG7*** only)
Advanced
Gamma
Real Cinema
Cinema
Real
Black Level
Eye Care
TruMotion
DE F G
72
G
Off
On
OK RETURN
4
ADVANCED - BLACK(DARKNESS) LEVEL
TV
POWER INPUT
DVD
STB
Q. MENU MENU
When you view a film this function adjust the TV to best picture
quality. Adjusting the contrast and the brightness of the screen using
the black level of the screen.
OK
This function works in the following mode:
RF(NTSC-M), AV, S-Video(NTSC-M, NTSC 4.43),
COMPONENT or HDMI.
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Press the
button and then
A d v a n c e d.
button to select
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
OK RETURN
1
3
4
Press the
button and then
B l a c k L e v e l.
Press the
or H i g h .
button and then
/
/
button to select
button to select L o w
Picture
Picture Mode
Colour Temperature
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
A
A
G
To Set
OK RETURN
L o w : The reflection of the screen gets darker.
H i g h : The reflection of the screen gets brighter.
2 3
Advanced
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Gamma
Film Mode
Black Level
Level
Black
Eye Care
DE F G
G
Low
High
OK RETURN
4
73
PICTURE CONTROL
EYE CARE (ONLY LCD TV MODELS)
TV
POWER INPUT
DVD
STB
Q. MENU MENU
It helps you adjust brightness when the screen is too bright to
prevent dazzling.
When selecting Picture Mode(Standard, Sport, Game, User1
and User2), you can operate this function.
OK
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
/
Press the
button to select A d v a n c e d.
button and then
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
3
Press the
button and then
/
OK RETURN
1
button to select E y e C a r e.
Picture
Picture Mode
Colour Temperature
4
Press the
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
button and then
/
button to select O n or O f f .
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
G
To Set
OK RETURN
2 3
Advanced
Gamma
Film Mode
Black Level
Eye Care
Care
Eye
DE F G
G
Off
On
OK RETURN
4
74
ADVANCED - TRUMOTION
TV
(42/47/52LG7*** only)
POWER INPUT
DVD
STB
Q. MENU MENU
It is used for the best picture quality without any motion blur or
judder when you enter a quick image or Film Source.
This feature is disable in RGB-PC, HDMI-PC mode.
OK
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
1
2
Press the M E N U button and then
the P i c t u r e menu.
Press the
button and then
/
/
Picture Mode
Colour Temperature
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
button to select A d v a n c e d.
DE F G
3
Press the
button and then
/
OK RETURN
1
button to select T r u M o t i o n.
Picture
Picture Mode
Colour Temperature
4
Press the
A
A
A
/
button to select O f f , L o w or H i g h.
L o w : Provides smooth picture movement. Use this setting for standard use.
H i g h : Provides smoother picture movement.
O f f : Use this setting when “High” and “Low” setting
result in noise.
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
G
To Set
OK RETURN
2 3
Advanced
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
• If you enable “TruMotion”, noise may appear on the screen.
• If this occurs, set “TruMotion” to “Off ”.
Gamma
Real Cinema
Black Level
Eye Care
TruMotion
TurMotion
DE F G
G
Off
Low
High
OK RETURN
4
75
PICTURE CONTROL
PICTURE RESET
TV
POWER INPUT
DVD
STB
Q. MENU MENU
OK
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
Picture Mode
Colour Temperature
Returns to the default factory setting for Picture Mode, Colour
Temperature, XD, Advanced, Aspect Ratio.
1
Press the M E N U button and then
the P i c t u r e menu.
/
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DE F G
OK RETURN
1
2
Press the
button and then
P i c t u r e R e s e t.
/
button to select
Picture
Picture Mode
Colour Temperature
76
3
Press the
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
button to initialize the adjusted value.
Advanced
Aspect Ratio
Picture Reset
Reset
Picture
Screen
DE F G
G
To Set
OK RETURN
2 3
TRUMOTION DEMO (42/47/52LG7*** only)
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Use it to see the difference between TruMotion Demo on and
TruMotion Demo off.
It’s not available to use this function in RGB/HDMI-PC mode.
OK
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Picture
Picture Mode
Colour Temperature
1
2
Press the MENU button and then
the P i c t u r e menu.
Press the
button and then
TruMotion Demo.
/
/
button to select
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DE F G
OK RETURN
1
button to begin T r u M o t i o n D e m o.
3
Press the
4
To stop T r u M o t i o n D e m o, press the M E N U button.
Picture
Picture Mode
Colour Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
TruMotion Demo
Demo
TruMotion
DE F G
G
To Start
OK RETURN
2 3
• TruMotion Demo
TruMotion Demo On
TruMotion Demo Off
77
PICTURE CONTROL
POWER INDICATOR (ONLY LCD TV MODELS)
TV
POWER INPUT
DVD
STB
Q. MENU MENU
It helps you adjust the brightness of moving LED and sound when
power is turned on.
OK
RETURN
AV MODE
Option
Language
SIMPLINK
Key Lock
Power Indicator
Factory Reset
PICTURE CONTROL
DE F G
1
Press the M E N U button and then
the O p t i o n menu.
/
1
button to select
Option
2
Press the
button and then
P o w e r I n d i c a t o r.
3
button to select
Press the
button and then /
S t a r t u p S o u n d(Only 32/37/42/47LG6***, 32/42LG8***),
S t a n d b y L i g h t, P o w e r L i g h t or D e m o M o d e(Only
32/37/42/47LG6***, 32/42LG8***).
/
button to select
Language
SIMPLINK
Key Lock
Power
Power Indicator
Indicator
Factory Reset
DE F G
4
Press the
button and then
desired Source.
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
/
OK RETURN
button to select your
G
To Set
OK RETURN
2 3
(Only 32/37/42/47LG6***, 32/42LG8***)
Power Indicator
Startup Sound
Sound
Startup
Standby Light
Power Light
Demo Mode
DE F G
G
Off
Low
Middle
High
OK RETURN
4
(Only 42/47/52LG7***)
Power Indicator
Standby Light
Light
Standby
Power Light
DE F G
78
G
Off
On
OK RETURN
4
IMAGE STICKING MINIMIZATION(ISM)METHOD
TV
(ONLY PLASMA TV MODELS)
POWER INPUT
DVD
STB
Q. MENU MENU
A frozen or still picture from a PC/Video game displayed on the
screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a
fixed image to remain on the screen for prolonged periods.
OK
RETURN
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to
clear entirely with White Wash.
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Orbiter
Orbiter may help prevent ghost images. However, it is best
not to allow any fixed image to remain on the screen. To
avoid a permanent image on the screen, the screen will move
every 2 minutes.
Option
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Factory Reset
Inversion
This function inverts the panel colour of the screen.
The panel colour is automatically inverted every 30 minutes.
DE F G
OK RETURN
1
Option
1
2
Press the M E N U button and then
select the O p t i o n menu.
Press the
button and then
I S M M e t h o d.
/
/
button to
button to select
Language
SIMPLINK
Key Lock
ISM
ISM Method
Method
Power Saving
Set ID
Factory Reset
DE F G
G
Normal
White Wash
Orbiter
Inversion
OK RETURN
2 3
3
button to select
Press the
button and then /
either N o r m a l, W h i t e W a s h, O r b i t e r or I n v e r s i o n.
If you do not need this function, set N o r m a l.
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
79
PICTURE CONTROL
POWER SAVING PICTURE MODE
POWER INPUT
TV
(ONLY PLASMA TV MODELS)
DVD
STB
Q. MENU MENU
This function allows you to reduce the power consumption of the TV.
OK
RETURN
AV MODE
FAV
P
MUTE
PICTURE CONTROL
Option
1
Press the M E N U button and then
select the O p t i o n menu.
/
2
Press the
button and then
P o w e r S a v i n g.
button to select
/
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Factory Reset
button to
DE F G
OK RETURN
1
3
4
Press the
button and then
power levels.
/
button to select
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Option
Language
SIMPLINK
Key Lock
ISM Method
Power
Power Saving
Saving
Set ID
Factory Reset
DE F G
G
Level
Level
Level
Level
Level
0
1
2
3
4
OK RETURN
2 3
80
FACTORY RESET
POWER INPUT
TV
DVD
STB
Q. MENU MENU
Use to quickly reset all the menu options to their original
factory preset values.
This function deletes all TV programmes.
OK
RETURN
AV MODE
PICTURE CONTROL
Option
1
Press the M E N U button and then
select the O p t i o n menu.
/
2
Press the
button and then
F a c t o r y R e s e t.
/
button to select
3
Press the
button and then
Y E S or N O.
/
button to select
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
button to
DE F G
OK RETURN
1
Option
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Power Indicator
Factory Reset
DE F G
G
To set
OK RETURN
2
Factory Reset
YES
FG
NO
OK RETURN
3
81
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Auto Volume automatically remains on the same level of volume
if you change programmes.
OK
RETURN
AV MODE
FAV
P
MUTE
SOUND & LANGUAGE CONTROL
Audio
1
2
Press the M E N U button and then
the A u d i o menu.
/
Press the
button and then
A u t o V o l u m e.
button to select
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
DE F G
0
OK RETURN
1
3
4
Press the
or O f f.
button and then
/
button to select O n
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
G
0
Off
On
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3
82
PRESET SOUND SETTINGS-SOUND MODE
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can select your preferred sound setting; SRS TSXT, Clear
Voice, Standard, Music, Cinema, Sport or Game and you can also
adjust the frequency of the equalizer.
OK
Sound Mode lets you enjoy the best sound without any Special
adjustment as the TV sets the appropriate sound options based
on the programme content.
RETURN
AV MODE
FAV
S R S T S X T, C l e a r V o i c e, S t a n d a r d, M u s i c, C i n e m a, S p o r t
and G a m e are preset for optimum sound quality at the factory
and are not adjustable.
P
MUTE
1
Press the M E N U button and then
the A u d i o menu.
/
2
Press the
button and then
S o u n d M o d e.
button to select
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
DE F G
0
OK RETURN
1
Press the
button and then / button to select S R S
T S X T, C l e a r V o i c e , S t a n d a r d, M u s i c, C i n e m a,
S p o r t , G a m e or U s e r.
3
4
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
G
0
SRS TSXT
Clear Voice
Standard
Music
Cinema
Sport
Game
User
SOUND & LANGUAGE CONTROL
Audio
OK RETURN
2 3
R
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
TruSurround XT
83
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Adjusting the audio equalizer.
OK
RETURN
AV MODE
FAV
P
MUTE
SOUND & LANGUAGE CONTROL
Audio
1
Press the M E N U button and then
the A u d i o menu.
/
2
Press the
button and then
S o u n d M o d e.
button to select
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
DE F G
0
OK RETURN
1
3
Press the
button and then
/
button to select U s e r.
4
Press the
5
Select a frequency band by pressing the
Set the desired sound level with the /
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button.
button.
button.
/
DE F G
G
SRS TSXT
Clear Voice
Standard
Music
Cinema
Sport
Game
User
0
OK RETURN
2 3 4
User
6
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
0.1 0.5 1.5 5.0 10 kHz
DE F G
OK RETURN
5
84
BALANCE
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can adjust the sound balance of the speakers to the
preferred levels.
OK
RETURN
AV MODE
FAV
P
MUTE
1
Press the M E N U button and then
the A u d i o menu.
/
2
Press the
B a l a n c e.
button to select
button and then
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
DE F G
0
OK RETURN
1
3
Press the
button and then
desired adjustment.
/
button to make
Audio
Sound Mode
Auto Volume
Balance
Balance
R15
0
SOUND & LANGUAGE CONTROL
Audio
TV Speaker
Audio Out
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3
85
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/OFF SETUP
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You can adjust the internal speaker status.
In TV, AV, COMPONENT, RGB[PC] and HDMI mode, internal
speaker audio can be operational even though there is no video
signal.
OK
RETURN
If you wish to use an external hi-fi system, turn off the TV
internal speakers.
AV MODE
FAV
P
MUTE
SOUND & LANGUAGE CONTROL
Audio
1
2
Press the M E N U button and then
the A u d i o menu.
/
Press the
button to select T V
button and then
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
S p e a k e r.
DE F G
0
OK RETURN
1
3
Press the
button and then
O n or O f f.
/
button to select
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
4
0
G
Off
On
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3
86
SELECTING AUDIO OUT
TV
POWER INPUT
DVD
STB
Q. MENU MENU
Select M o n i t o r O u t or V a r i a b l e o u t to connect the audio outputs.
OK
RETURN
AV MODE
FAV
P
MUTE
1
Press the M E N U button and then
the A u d i o menu.
/
2
Press the
button to select
button and then
/
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
A u d i o O u t.
DE F G
0
OK RETURN
1
3
4
Press the
button and then /
M o n i t o r O u t or V a r i a b l e o u t.
button to select
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
0
G
SOUND & LANGUAGE CONTROL
Audio
Monitor Out
Variable Out
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3
87
SOUND & LANGUAGE CONTROL
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1
Press the Q . M E N U button and then
select the M u l t i A u d i o menu.
2
Press the
button to
button to select the sound output.
SOUND & LANGUAGE CONTROL
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved. To switch back to stereo.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
88
/
/
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
2
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
SOUND & LANGUAGE CONTROL
1
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
89
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE SELECTION
TV
POWER INPUT
DVD
STB
Q. MENU MENU
The menus can be shown on the screen in the selected language. First select your language.
OK
RETURN
AV MODE
FAV
P
MUTE
SOUND & LANGUAGE CONTROL
90
1
Press the M E N U button and then use
O p t i o n menu.
2
Press the
button and then use
/
3
Press the
button and then use
desired language.
/
4
Press the O K button
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
button to select the
/
button to select L a n g u a g e.
/
/
button to select your
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
TIME
SIZE
UPDATE REVEAL
INDEX
HOLD
TEXT
PIP
TIME SETTING
CLOCK SETUP
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is
unplugged, reset the clock.
OK
RETURN
AV MODE
FAV
P
MUTE
Time
Press the M E N U button and then
the T i m e menu.
/
2
Press the
C l o c k.
button to select
button and then
/
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
DE F G
TIME SETTING
1
OK RETURN
1
3
Press the
button and then
4
Press the
minute.
button and then
button to set the hour.
/
/
button to set the
Time
Clock
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
DE F G
5
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
G
-- : --
OK RETURN
2 3 4
91
TIME SETTING
AUTO ON/OFF TIMER SETTING
TV
POWER INPUT
DVD
STB
Q. MENU MENU
The Off time function automatically switches the TV to standby
at a preset time.
OK
Two hours after the TV is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
RETURN
Once the on time/off time is set, these functions operate daily at
the preset time.
AV MODE
FAV
P
The Off time function overrides the On timer function if both are
set to the same time.
MUTE
The TV must be in standby mode for the On timer to work.
Time
TIME SETTING
1
Press the M E N U button and then
the T i m e menu.
2
Press the
button and then / button to select
O n/O
O f f T i m e.
O f f T i m e function, select O f f.
• To cancel O n/O
/
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
DE F G
OK RETURN
1
3
Press the
button and then
button to set the hour.
/
4
Press the
minutes.
5
For On Time function only
• P r o g r a m m e : Press the
button and then /
button to select the programme.
• V o l u m e: Press the
button and then / button to
adjust volume level at switch-on.
button and then
/
button to set the
Time
Clock
Off Time
Time
Off
G
On Time
Sleep Timer
Auto Sleep
DE F G
OK RETURN
2 3 4
Time
Clock
Off Time
On Time
Time
On
G
Sleep Timer
Auto Sleep
6
-- : -Off
07:00
PR
Vol.
On
1
8
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3 4 5
92
SLEEP TIMER SETTING
TV
POWER INPUT
DVD
STB
Q. MENU MENU
You do not have to remember to switch the TV off before you
go to sleep. The sleep timer automatically switches the TV to
standby after the preset time has elapsed.
OK
RETURN
AV MODE
FAV
P
MUTE
Time
Press the M E N U button and then
the T i m e menu.
/
2
Press the
button and then
S l e e p T i m e r.
button to select
/
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
DE F G
TIME SETTING
1
OK RETURN
1
Press the
minute.
3
button and then
/
button to set the
Time
Clock
Off Time
On Time
Sleep Timer
Timer
Sleep
G
Off
Auto Sleep
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
4
DE F G
OK RETURN
2 3 4
! NOTE
G
When you switch the TV off, the TV releases the preset sleep time.
93
TIME SETTING
AUTO SHUT-OFF SETTING
TV
POWER INPUT
DVD
STB
Q. MENU MENU
If the TV set is switched on and there is no input signal, it will
switch off automatically after 10 minutes.
OK
RETURN
AV MODE
FAV
P
MUTE
Time
TIME SETTING
1
Press the M E N U button and then
the T i m e menu.
/
2
Press the
S l e e p.
button to select A u t o
button and then
/
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
DE F G
OK RETURN
11
Time
3
4
Press the
O f f.
button and then
/
button to select O n or
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Sleep
Auto
G
Off
On
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu screen.
DE F G
OK RETURN
2 3
94
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard
teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T or R E T U R N button to switch off teletext. The previous mode reappears.
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P /
button can be used to select the preceding or following page.
2
TELETEXT
SIMPLE TEXT
95
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button return to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A
1
2
3
4
96
Page selection
Press the i button to select the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
As with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The P / button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
A TIME
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press
the RED/GREEN, P / or NUMBER buttons.
Press again to exit this function.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Press
this button again to view the updated teletext page.
TELETEXT
A UPDATE
?
A REVEAL
Press this button to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
i
A INDEX
Select the each index page.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive. To continue press this button again.
97
APPENDIX
TROUBLESHOOTING
The TV does not operate properly
Check to see if there is any object between the TV and the remote control
causing an obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Correct remote operating mode set: TV, STB etc.?
■ Install new batteries.
■
The remote control
does not work
Power is suddenly
turned off
Is the sleep time set?
■ Check the power control settings. Has the Power supply been interrupted.
■ Is Auto sleep activated on this station.
■
The video function does not work.
Check whether the TV is switched on.
■ Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted correctly into the mains?
■ Check your antenna direction and/or location.
■ Test the mains outlet by plugging another TV into the same outlet.
■
No picture &
No sound
APPENDIX
P i c t u r e a p p e a r s s l o wly after switching on
■
This is normal, the image is muted during the TV startup process. Please contact your
service center, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
Allow a sufficient distance between the TV and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
No or poor colour
or poor picture
Horizontal/vertical
bars or picture shaking
■
■
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
■ Check for sources of possible interference.
■
Poor reception on
some channels
Lines or streaks in
pictures
No picture
when connecting
HDMI
98
■
■
■
Check antenna (Change the position of the antenna).
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no
screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
+ / - ( o r V o l u m e ) button.
Press the
Sound muted? Press M U T E button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK &
No sound
■
No output from one
of the speakers
■
Adjust Balance in menu option.
Unusual sound from
inside the TV
■
A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
No sound
when connecting
HDMI or USB
Check HDMI cable over version 1.3.
■ Check USB cable over version 2.0.
■
*This feature is not available for all models.
The signal is out of
range.
Vertical bar or stripe
on background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
Adjust resolution, horizontal frequency, or vertical frequency.
■ Check the input source.
■
■
Use Auto configure or adjust clock, phase, or H/V position.
■
Check the signal cable.
Reinstall the PC video card.
■
APPENDIX
There is a problem in PC mode. (Only PC mode applied)
99
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Do not to use a wet cloth.
■
APPENDIX
Extended Absence
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
100
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height x Depth)
50PG60UR-TA
50PG61UR-TA
60PG60UR-TA
60PG61UR-TA
without stand
1044.4 x 680.6 x 79.6 mm
41.1 x 26.7 x 3.1 inches
1235.6 x 792.8 x 79.6 mm
48.6x 31.2 x 3.1 inches
1455 x 924.8 x 84.1 mm
57.3x 36.4 x 3.3 inches
28 kg / 61.7 lbs
25 kg / 55.1 lbs
43.65 kg / 96.2 lbs
39.7kg / 87.5lbs
59.2 kg / 130.5 lbs
51.7 kg / 114 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
50PG3***
50PG7***
60PG7***
50PG30FR-TD
50PG70FR-TB
60PG70FR-TB
60PG70FR-TA
1232 x 850 x 363.6 mm
48.5 x 33.5x 14.3inches
1235.6 x 849.3 x 364.1 mm
48.6 x 33.4x 14.3inches
1455 x 985 x 414 mm
57.3 x 38.8 x 16.3 inches
1232 x 793 x 84 mm
48.5x 31.2 x 3.3 inches
1235.6 x 792.8 x 79.6 mm
48.6x 31.2 x 3.1 inches
1455 x 924.8 x 84.1 mm
57.3x 36.4 x 3.3 inches
42.3 kg / 93.3 lbs
38.3kg / 84.4lbs
45.65 kg / 100.6 lbs
41.7kg / 91.9lbs
62.4 kg / 137.6 lbs
54.9 kg / 121 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
with stand
(Width x Height x Depth)
without stand
with stand
without stand
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
APPENDIX
1455 x 985 x 414 mm
57.3 x 38.8 x 16.3 inches
MODELS
■
42PG60UR-TA
42PG61UR-TA
1235.6 x 849.3 x 364.1 mm
48.6 x 33.4x 14.3inches
Power requirement
Weight
60PG6***
1044.4 x 735.4 x 308.0 mm
41.1x 28.9 x 12.1 inches
without stand
Dimensions
50PG6***
with stand
with stand
Weight
42PG6***
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
101
APPENDIX
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
37LG60UR-TA
42LG60FR-TA
47LG60FR-TA
805.6 x 626 x 333 mm
31.7 x 24.6 x 13.1 inches
929 x 706.9x 374.7mm
36.6x 27.8 x 14.8 inches
805.6x 587.4x 96.2mm
31.7 x 23.1 x 3.7 inches
929 x 665x 98.7 mm
36.6x 26.2 x 3.9 inches
1037.8x 747x 80.8mm
40.9 x 29.4 x 3.2 inches
1152.8 x 820.8 x 79 mm
45.4 x 32.3x 3.1 inches
14.4 kg / 31.7 lbs
12.2 kg / 26.9 lbs
18.1 kg / 39.9 lbs
21.2 kg / 46.7 lbs
21.4 kg / 47.2 lbs
20.4 kg / 45 lbs
32.8 kg / 72.3 lbs
27.2 kg / 60 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
1037.8 x 794.6 x 379.5 mm 1152.8 x 868.6 x 434.5 mm
40.9x 31.3 x 14.9 inches
45.4 x 34.2 x 17.1 inches
42LG7***
47LG7***
52LG7***
42LG70YR-TA
47LG70YR-TA
52LG70YR-TA
without stand
1026.2 x 687.9 x 111.8 mm
40.4 x 27.0 x 4.4 inches
1140.4 x 764.8 x 129.0 mm
44.8 x 30.1 x 5.0 inches
1284.4 x 844.6 x 129.5 mm
50.5 x 33.2 x 5.0 inches
21.7 kg / 47.8 lbs
19.1 kg / 42.1 lbs
30.1 kg / 66.3 lbs
25.4 kg / 55.9 lbs
39.9 kg / 87.9 lbs
35.2kg / 77.6lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
APPENDIX
MODELS
with stand
(Width x Height x Depth)
without stand
with stand
without stand
Power requirement
32LG8***
42LG8***
47LG75**
32LG80UR-TA
42LG80UR-TA
47LG75QR-TA
830 x 648.9 x 232 mm
23.7 x 25.5 x 9.1 inches
1063 x 722.2 x 293.3 mm
41.9x 28.4 x 11.5 inches
1140.4 x 820.1 x 342.9 mm
44.8 x 32.2 x 13.5 inches
830x 581x 232mm
23.7 x 22.9 x 9.1 inches
1063x 649x 99mm
41.9 x 25.6 x 3.9 inches
1140.4 x 764.8 x 129.0 mm
44.8 x 30.1 x 5.0 inches
13.79 kg / 30.4 lbs
11 kg / 24.2 lbs
26.9 kg / 59.3 lbs
24.24 kg / 53.4 lbs
30.1 kg / 66.3 lbs
25.4 kg / 55.9 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
102
32LG60UR-TA
1284.4 x 898.6 x 342.9 mm
50.5 x 35.3 x 13.5 inches
Power requirement
■
47LG6***
1140.4 x 820.1 x 342.9 mm
44.8 x 32.2 x 13.5 inches
without stand
Weight
42LG6***
1026.2 x 734.0 x 293.4 mm
40.4 x 28.8 x 11.5 inches
with stand
Dimensions
37LG6***
with stand
(Width x Height x Depth)
Weight
32LG6***
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
PROGRAMMING THE REMOTE CONTROL
The remote control is a multi brand or universal remote. It can be programmed to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a S T B and press the corresponding mode button (such as a D V D or S T B) on the
remote control, while pointing at the component. Test the P O W E R and P / buttons to see if the
component responds correctly. If the component does not operate correctly, the remote control requires
programming to operate the device.
2
Switch on the component to be programmed, then press the corresponding mode button (such as a
D V D or S T B) on the remote control. The remote control button of the desired device is illumintated.
3
Press the M E N U and M U T E buttons simultaneously, the remote control is ready to be programmed with
the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for
the corresponding component can be found on the following pages. If the code is correct, the device will
turn off.
5
Press the M E N U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
APPENDIX
1
103
APPENDIX
Programming code
(This feature is not available for all models.)
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
Brand
Codes
Brand
Codes
017
009
026
006
015
006
008
018
016 025
006
HDSTB
Brand
APPENDIX
104
ALPHASTAR DSR
AMPLICA
Astro Philips(ML)
Astro Thompson(ML)
Astro Nokia(ML)
BIRDVIEW
CHANNEL MASTER
Codes
123
050
159
160
161
051
013
036
CHAPARRAL
008
CITOH
054
CURTIS MATHES
050
DRAKE
005
011
141
DX ANTENNA
024
ECHOSTAR
038
093
097
122
ELECTRO HOME
089
EUROPLUS
114
FUJITSU
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
134
004 016 029
059 101
140
HOUSTON TRACKER 033
057
HUGHES
068
Humax(SL)
158
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
PACE SKY SATELLITE 143
PANASONIC
060
PANSAT
121
PERSONAL CABLE
117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
PROSAT
072
PSI(TH)
157
RCA
066
037 039 051
104
147
144
059 063 064
124 125
070
142
102
110 111
106
REALISTIC
043 074
SAMSUNG
123
SATELLITE SERVICE CO 028 035
085
Samart(TH)
156
SCIENTIFIC ATLANTA 032 138
SONY
103
STARCAST
041
SUPER GUIDE
020 124
TEECOM
023 026
088 090
137
TOSHIBA
002 127
True Vision(TH)
155
UBC(TH)
153
UBC/SAMART(TH) 154
UNIDEN
016 025
044 045
078 079
10 135
VIEWSTAR
115
VTC(VN)
162
WINEGARD
128 146
ZENITH
081 082
091 120
047 057
125
075 087
107 130
042 043
048 049
080 086
136
083 084
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
APPENDIX
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
105
APPENDIX
APPENDIX
106
(Hexa)
Code
Function
Note
Code
Function
0B
INPUT
R/C Button
09
MUTE
R/C Button
08
POWER
R/C Button (Power On/Off)
53
LIST
R/C Button
60
PIP
R/C Button
10 ~ 19 Number Key 0 ~ 9 R/C Button
43
MENU
R/C Button
1E
FAV
R/C Button
5B
RETURN
R/C Button
1A
Q.VIEW
R/C Button
07
R/C Button
20
TEXT
R/C Button
06
R/C Button
B0
SIZE
R/C Button
40
R/C Button
8F
INDEX
R/C Button
41
R/C Button
B1
TIME
R/C Button
(Hexa)
Note
44
OK
R/C Button
BD
REVEAL
R/C Button
72
RED
R/C Button
8E
HOLD
R/C Button
71
GREEN
R/C Button
BA
UPDATE
R/C Button
63
YELLOW
R/C Button
7E
SIMPLINK
R/C Button
61
BLUE
R/C Button
B1
A Stop
R/C Button
02
+
R/C Button
B0
G Play
R/C Button
03
-
R/C Button
BA
l l Pause
R/C Button
00
P
R/C Button
8F
FF Rew
R/C Button
01
P
R/C Button
8E
GG FF
R/C Button
30
AV MODE
R/C Button
45
Q.MENU
R/C Button
R/C Button
BD
Ô(Record)
R/C Button
7C
EXTERNAL CONTROL THROUGH RS-232C
(ONLY PLASMA TV MODELS)
Connect the RS-232C input jack to an external control device (such as a computer or an A/V control
system) and control the TV’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the TV back panel.
RS-232C connection cables are not supplied with the TV.
RS-232C Setup
HDMI IN
RS-232C IN
(CONTROL)
HDMI IN
RGB(PC)
AUDIO
(RGB/DVI)
RGB IN
HDMI DVI IN
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
APPENDIX
Type of Connector; D-Sub 9-Pin Male
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
107
APPENDIX
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
3-Wire Configurations(Not standard)
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID (Only Plasma TV models)
Option
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set ID
Factory Reset
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’1. See page p .112.
APPENDIX
1
Press the M E N U button and then use
to select the O P T I O N menu.
/
button
DE F G
OK RETURN
1
/
2
Press the
button and then use
select Set ID.
button to
3
Press the
button and then use / button to
adjust Set ID to choose the desired TV ID number.
• The adjustment range of SET ID is 1~99.
Option
Language
SIMPLINK
Key Lock
ISM Method
Power Saving
Set
Set ID
ID
Factory Reset
DE F G
G
1
OK RETURN
2 3
4
Press the M E N U button to return to normal TV viewing.
Press the R E T U R N button to move to the previous menu
screen.
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
A
108
Stop bit : 1 bit
Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Command Reference List
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 ~ 01
02. Aspect Ratio
k
c
Refer to p.110
03. Screen Mute
k
d
04. Volume Mute
k
e
05. Volume Control
k
f
06. Contrast
k
g
07. Brightness
k
08. Colour
k
COMMAND1 COMMAND2
DATA
(Hexadecimal)
15. Balance
k
t
00 ~ 64
16. Colour Temperature
k
u
00 ~ 03
00 ~ 01
17. Red Adjustment
k
v
00 ~ 3C
00 ~ 01
18. Green Adjustment
k
w
00 ~ 3C
00 ~ 64
19. Blue Adjustment
k
$
00 ~ 3C
00 ~ 64
20. Abnormal Status
k
z
FF
h
00 ~ 64
21. ISM Method
j
p
Refer to p.112
i
00 ~ 64
22. Power Saving
j
q
00 ~ 04
09. Tint
k
j
00 ~ 64
23. Auto Configure
j
u
01
10. Sharpness
k
k
00 ~ 64
24. Equalize
j
v
Refer to p.112
11. OSD Select
k
k
l
m
00 ~ 01
25. Tune Command
m
a
Refer to p.113
00 ~ 01
26. Channel Skip
m
b
00 ~ 01
27. Key
m
c
Key Code
13. PIP/DW
k
n
00 ~ 03
28. Input select (Main)
x
b
Refer to p.113
14. PIP Position
k
q
00 ~ 03
29. Input select(PIP)
x
y
Refer to p.113
12. Remote Control Lock
/Key Lock Mode
Transmission
OK Acknowledgement
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK][Data][x]
[Command 1] : First command to control the set.(j,k,m or x)
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected TV is
controlled. Set ID is indicated as decimal (1~ 99)
on menu and as Hexa decimal (0x0~ 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
APPENDIX
Transmission / Receiving Protocol
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this format
when receiving abnormal data form non-viable functions or
communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will send the ‘a’, ‘b’.
[NG]: use the large character.
109
APPENDIX
0 5 . Volume Control (Command: k f)
0 1 . Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 112.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.”
0 6 . Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
02. Aspect Ratio (Command: k c) (Main picture size)
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the Picture menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: Normal screen (4:3)
Data 02: Wide screen (16:9)
Data 04: Zoom1
Data 05: Zoom2
Data 06: Original
Data 07: 14:9
Data 09: Just Scan
APPENDIX
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p) mode, J u s t
S c a n is available.
Refer to ‘Real data mapping 1’. See page 112.
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
0 7 . Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 112.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
0 3 . Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Data Min : 00 ~ Max : 64
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
Refer to ‘Real data mapping 1’. See page 112.
09. Tint (Command: k j)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Refer to ‘Real data mapping 1’. See page 112.
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
110
To adjust the screen colour.
You can also adjust colour in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
15. Balance (Command: k t)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64
Data Min: 00 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 112.
Refer to ‘Real data mapping 1’. See page 112.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: k u)
To adjust colour temperature.
You can also adjust Colour Temperature in the Picture
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm 03: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
12. Remote Control Lock/Key Lock Mode (Command: k m)
To lock the remote control and the front panel
controls on the set.
To adjust red in colour temperature.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
17. Red Adjustment (Command: k v)
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 112.
13. PIP / DW (Command: k n)
To control the PIP (Picture In picture)/DW.
You can also control the PIP/DW using the PIP button
on the remote control or in the PIP/DW menu.
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 00:PIP/DW off
Data 01: PIP
Data 02: DW1
Data 03: DW2
Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x]
1 8 . Green Adjustment (Command: k w)
APPENDIX
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
To adjust green in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 112.
Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
14. PIP Position (Command: k q)
To select sub picture position for PIP.
You can also adjust the sub picture position using
PIP button on the remote control or in the PIP/DW
menu.
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 00: Right down on screen
Data 01: Left down on screen
Data 02: Left up on screen
Data 03: Right up on screen
1 9 . Blue Adjustment (Command: k $)
To adjust blue in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 3C
Refer to ‘Real data mapping 2’. See page 112.
Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
111
APPENDIX
23 . Auto Configure (Command: j u)
20. Abnormal State (Command: k z)
To adjust picture position and minimize image
To recognize an abnormal state.
shaking automatically. It works only in RGB (PC)
mode.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF: Read
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
21. ISM Method (Command: j p)
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
MSB
0
LSB
0
0
0
0
APPENDIX
x
6
x
5
x
0
0
Inversion
Orbiter
White Wash
Normal
Reserved
7
0
4
3
2
1
0
Function
0
0
0
1
Inversion
0
0
1
0
Orbiter
0
1
0
0
White wash
1
0
0
0
Normal
x
Reserved
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
2 4 . E q u a l i z e (C o m m a n d : j v )
G To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
0
LSB
0
22. Low Power(Power Saving) (Command: j q)
To reduce the power consumption of the TV.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data Min: 00 ~ Max: 04
(*transmit by Hexadecimal code)
0
0
0
0
Data
7
6
5
Frequency
4
3
2
1
0
Step
0
0
0
1’st Band
0
0
0
0
0
0(decimal)
0
0
1
2’nd Band
0
0
0
0
1
1(decimal)
0
1
0
3’rd Band
0
0
0
1
0
2(decimal)
0
1
1
4’th Band
1
0
0
5’th Band
1
0
1
6’th Band
1
1
0
7’th Band
1
1
1
1
0 30(decimal)
1
1
1
8’th Band
1
1
1
1
1
...
31(decimal)
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 : Step 0
A : Step 10
F : Step 15
10 : Step 16
* Real data mapping 2
00: -30
01: -29
02: -28
1E:
0
28: +10
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
C7 : Step 199
FE : Step 254
FF : Step 255
112
0
Frequency
*More two kinds of function can not be set at a time.
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
0
3A : +28
3B : +29
3C : +30
4E: N/A
4F : N/A
50: N/A
25 . Tune Command (Command: m a)
Tune Channel to following Physical/major/minor number
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0: Min: 00H ~ Max: 63H
(* transmit by Hexadecimal code)
Data 1: Don’t care
Data 2: 0 : Main
1 : Sub
28. Input select (Command: x b)
(Main Picture Input)
To select input source for TV.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data: Structure
MSB
0
0
Data 00 : Skip
01 : Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
0
0
0
0
0
Input Number
External Input
Data
0
0
0
1
Analog
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
G To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
0
External Input
Acknowledgement [a][ ][Set ID][ ][OK][Data0][Data1][x]
[a][ ][Set ID][ ][NG][Data0][x]
26. Channel Skip(Command: m b)
LSB
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
27. K e y (Command: m c)
29. Input select (Command: x y)
To send IR remote key code.
To adjust input source for sub picture in PIP mode
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Transmission [x][y][ ][Set ID][ ][Data][Cr]
Data: Structure
Data: Key code - Refer to page 106.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
MSB
0
APPENDIX
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
LSB
0
0
0
External Input
0
0
0
0
Input Number
External Input
Data
0
0
0
1
Analog
0
0
1
0
AV
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x]
113
Download PDF

advertising