LG | CF-14F30 | LG CF-14F30 Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
Model number:
Serial number:
P/NO : 3828VA0117L
and
quote this
require service.
(MC64A, 004M/230M TX)
Installation
Power
This set
Never
operates
AC mains
on an
supply,
the
is
voltage
as
indicated
DC power to the set. In the event of thunderstorms
aerial and mains plugs.
apply
or
on
the label
on
the back
powercuts, please pull
cover.
out the
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
of the set
cover
hazards. If the set does not
as
this
can
expose you to very
high voltage
and other
operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked
+75§U on
the back
cover.
For the best
reception
an
outdoor aerial should be used.
Location
Position your set
so
that
bright light
no
or
sunlight
falls
not to expose the set to any unnecessary vibration,
placed in a position to allow a free flow of air. Do not
Battery
directly
cover
or
screen.
heat. Also
the ventilation
Care should be taken
ensure
openings
on
thatthe set is
the back
cover.
installation
The remote control handset is
powered by two AA type batteries. Gently pull down the
battery compartment is exposed. Install two batteries as
remote control handset until the
the
onto the
moisture, dust
polarity symbols(
+
and
-
)
marked inside the
cover
of the
indicated
by
compartment.
Note : To avoid damage from possible battery leakage, remove the batteries if you do not
the remote control handset for an extended period of time.
plan
to
use
Location and function of controls
Remote control handset
All the functions
can
be controlled with the remote control
handset. Some functions
buttons
on
the front
panel
can
also be
Before you use the remote control
the batteries.
1.
1
2
PSM
2.
456
3.PSM
TV/AV
4.
PR
0
MENU
VOL
OK
5.
off to
standby.
on or
off.
(Picture Status Memory)
preferred picture setting.
QUICK VIEW
returns to the previously viewed programme.
NUMBER BUTTONS
switch the set
SYSTEM UBBSLEEP
on
from
standby
or
directly
select
number.
11
6. TV/AV
12
13
or
VOL
TEXT
PR
9
10
standby
recalls your
789
8
from
Q.VIEW
6
7
handset, please install
MUTE
switches the sound
123
4
5
on
MUTE
3
with the
POWER
switches the set
POWER
adjusted
of the set.
selects TV
MIX
TIME
7.
EXPANDHOLDUPDATE
STARTLENGTHSP/LP
a menu.
ON/OFF
REW
PLAY
FF
P/STILL
STOP
REC
8.
14
CH
AV mode.
MENU
selects
QSR
or
REVEALINDEX
¡a/¡a (Programme Up/Down)
switches the set on from standby.
selects
a
programme
or a menu
item.
¢¸/¢º(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection
9.
UBB
or
displays
the current mode.
(option)
switches the UBB sound
on or
off.
10.SYSTEM
(With TELETEXT)
displays the system
selection mode.
a
Location and function of controls
Remote control handset
11. SLEEP
sets the
sleep timer.
12. UNIT
selects
1
POWER
single
or
double
13.TELETEXT BUTTONS
These buttons
2
5
digit.
MUTE
1
23
4
56
For further
details,
14.VCR BUTTONS
(option)
used for teletext.
are
see
the 'Teletext' section.
(option)
control the video cassette recorder of
7
15. MAIN POWER
SYSTE M
-/--
12
our
brand.
standby
mode.
89
0
(
switches the set
)
on or
off.
10
16.STANDBY INDICATOR
PR
illuminates red when the set is in
8
flashes when
OK
VOL
VOL
is
a
button
on
the remote control handset
pressed.
PR
17.REMOTE CONTROL SENSOR
37
TV/AV
6
MENU
SLEEP Q.VIE W
PSM
18.KARAOKE(option)
These controls
UBB
9
(Without TELETEXT)
S
Front
panel
Shown is a simplified representation of
front panel. Here shown may be somewhat
different from your set.
POWER
r
MENU OK
1516177
POWER
r
MENU
¢¸VOL¢º ¡aPR¡a
8
OK
are
used for karaoke function.
See the 'Karaoke' section.
11
4
M.VOL ECHO
MIC
18
-VOL+-PR+M.VOL ECHO
MIC
Basic
operation
On and off
1.Press the main power button to switch the set on.
If the set is in standby mode, press the POWER,¡a/¡a, TV/AV
2.
3.
or
NUMBER buttons
on
fully.
on
the remote control handset to switch it
Press the POWERbutton
The set reverts to
standby
the remote control handset.
on
mode.
4.Press the main power button
again
to switch the set off.
POWER
MUTE
Note
PSM
:
If, while the
replaced in
123
set is switched on, the mains
nected the set will switch to
standby
is discon-
plug
when the mains
plug
is
the mains power socket.
Q.VIEW
456
TV/AV
789
selection
You
a
can
Before
MENU
VOL
select
programme number with the
¡a/¡a
or
NUMBER
buttons.
PR
0
Programme
VOL
OK
entering double digit programme numbers,
display __appears on the screen.
press the -/--
button until the
TEXT
PR
UBBSLEEP
MIX
TIME
REVEALINDEX
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
Volume
adjustment
Press the
¢¸/¢º
button to
adjust
the volume.
Mute function
Press the MUTEbutton. The sound is switched off and the
appears. You
button.
can
cancel it
by pressing
the MUTE
display
¢¸/¢º
or
REC
Quick view
Press the Q.VIEWbutton to view the last programme you
were
watching.
On
screen
This is
an
language
optional
selection
(option)
function. In the models which have
language function, the menu can be displayed
desired language. First select your language.
on
the
on
screen
screen
in the
Repeatedly press the MENUbutton to select MENU 3.
¡a/¡a button to select LANGUAGE.
3.Press the OKbutton to display the sub menu.
4.Press the ¡a/¡a button to select the desired language.
All the on screen displays will appear in the selected language.
5.Press the MENUbutton repeatedly or TV/AVbutton once to
return to normal TV viewing.
1.
2.Press the
On
The
screen menus
between you and your set takes place on screen with an
The buttons required for the operating steps are also displayed.
dialogue
menu.
operator
Menu selection
Repeatedly press the MENUbutton to display each menu.
Press the ¡a/¡a button to select a menu item.
The selected menu item changes from green to purple.
3.Press the ¢¸/¢º button to change the setting of a menu item or OK
button to display the sub menu.
Note :
a.
The menus automatically disappear in about 12 seconds if you do not
press a button.
b. In the AV mode, MENU 1 is not displayed.
c. In the teletext mode, MENUs are not displayed.
d. I n some models, the menu item LANGUAGE is also displayed on the
screen in MENU 3.
e.
In some models, the menu item TETRIS is also displayed on the
screen in MENU 3.
1.
2.
POWER
MUTE
PSM
Q.VIEW
TV/AV
PR
MANUALOPROGRAM
PROGRAMOOOOOOOO1
AUTOOPROGRAM
FINEOOOOOOOOO{{{
PROGRAMOEDIT
SEARCHOOOOOOO{{{
()OOKOMENU
()O}{O0_9OOKOMENU
BANDOOOOOOOVHF_L
MENU
VOL
OK
VOL
¥..............
TEXT
PR
MENU 1
UBBSLEEP
'O80OCONTRAST
'O60OBRIGHTNESS
・O50OCOLOROOOOOOOO
≥O50OSHARPNESS
VHF_LOOOOOOOOOOO1
O
MIX
TIME
REVEALINDEX
¥¥¥¥¥¥¥¥¥¥¥¥....
¥...............
()O}{OOKOMENU
MENU
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
QSR
REW
PLAY
MENU 2
ON/OFF
FF
<
OOOOOOOOOO
PR.OOO1OOOPR.OO__
>
INPUTOOOOOOTV
CH-
P/STILLSTOP
REC
SKIPOOOOOOOOOOOFF
CHILDOLOCKOOFF
AUTOOSLEEPOOFF
SYSTEMOOOOOOOOOO
()OOKOMENU
()O}{O0_9OOKOMENU
MENU 3
CLOCKOOOOOO__:__OO
FAVORITEO1
OFFOTIMEOOO__:__O
FAVORITEO2
ONOOTIMEOOO__:__OO
ONOOPR.OOOOO1
()O}{O0_9OOKOMENU
()OOKOMENU
MENU 4
AUTO
PAL
SECAM
NTSC4.43
NTSC3.58
()OOKOMENU
TV programme
Setting up
MENU 1
MANUALOPROGRAM
AUTOOPROGRAM
PROGRAMOEDIT
TV stations
Up to 80 or 100 TV stations can be stored in this set by programme numbers
(0 to 79 or 99). Once you have preset the stations, you will be able to use the
¡a/¡a or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using an automatic or a manual mode.
Auto programme
All stations that
POWER
MUTE
PSM
123
Q.VIEW
456
789
MENU
OK
be received
When auto programming is completed, the station stored into pro-gramme
number 1 will appear on the screen.
To stop auto programming, press the MENUbutton. The active station at
that time will be displayed.
:
Some undesired stations may be stored, such as noisy or unclear
You can easily skip these stations by
signals from distant transmitters.
entering PROGRAM EDIT mode.
Manual programme
PR
VOL
can
The band automatically changes
VHF-L ¡æ VHF-H ¡æ UHF.
Note
TV/AV
0
tuning
are stored by this method. It is recommended that
you use auto programme during installation of this set.
1. Press the MENU button to select MENU 1.
2. Press the ¡a/¡a button to select AUTO PROGRAM.
3. Press the OKbutton to begin auto programming.
()OOKOMENU
VOL
TEXT
tuning
Manual programme lets you
whatever order you desire.
manually
tune and arrange the stations in
1. Press the MENU button to select MENU 1.
2.Press the ¡a/¡a button to select MANUAL PROGRAM.
3. Press the OKbutton to display the MANUAL PROGRAMmode.
PR
UBBSLEEP
PROGRAMOOOOOOOO1
FINEOOOOOOOOO{{{
SEARCHOOOOOOO{{{
BANDOOOOOOOVHF_L
MIX
TIME
REVEALINDEX
¥..............
()O}{O0_9OOKOMENU
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
REC
4.Press the
¡a/¡a button to select PROGRAM. Select the desired
programme number with the ¢¸/¢º or NUMBER buttons.
5.Press the ¡a/¡a button to select BAND. Press the ¢¸/¢º button to
select VHF-L, VHF-Hor UHFas required.
6.Press the ¡a/¡a button to select SEARCH. Press the ¢¸/¢º button to
commence searching. To stop the search at any time press the MENU
or ¡a/¡a button.
7.If this station is the one required store it with the OKbutton, if not press
the ¢¸/¢º button again.
8.To store another station repeat steps 4 to 7.
9.Press the MENUbutton repeatedly or TV/AVbutton once to return to
normal TV viewing.
Fine
tuning
Normally fine tuning is only necessary if reception is poor.
1. Repeat steps 1 to 3 above.
2. Press the ¡a/¡a button to select FINE.
3. Press the ¢¸/¢º button to fine tune for the best picture and sound. If
the ¢"button is pressed, the display {{{will appear. And if the ¢'
button is pressed, the display }}}will appear.
4. Press the OKbutton to store the new setting. The display STOREDwill
appear.
5.Press the MENUbutton repeatedly or TV/AVbutton once to return to
normal TV viewing.
The finely tuned programme will be indicated by yellow number during
programme selection.
TV stations
Setting up
Programme
MENU 1
MANUALOPROGRAM
AUTOOPROGRAM
PROGRAMOEDIT
edit
This function enables you to rearrange the programmes stored by
auto programming in whatever order you desire. Also you can skip
particular
programme numbers stored
by
auto
programming.
()OOKOMENU
1.
Press the MENU button to select MENU 1.
2.
Press the
¡a/¡a
3.Press the
button to select PROGRAM EDIT.
OKbutton, and the PROGRAM EDITmode will
appear.
POWER
MUTE
<
PR.OOO1OOOPR.OO__
>
SKIPOOOOOOOOOOOFF
PSM
123
Q.VIEW
456
()O}{O0_9OOKOMENU
TV/AV
789
Exchanging
PR
0
programmes
1.Press the
MENU
VOL
OK
VOL
¢¸/¢º button to change the left hand programme
viewing station corresponding to the new pro-
number. The
TEXT
gramme number is shown
PR
the
on
screen.
2.Press the NUMBER buttons to enter the desired
UBBSLEEP
programme number.
numeric '0' in front of
it, i.e.
MIX
TIME
STARTLENGTHSP/LP
CH+
QSR
programme number will
programme number.
REVEALINDEX
4.
Repeat steps
ON/OFF
Skipping
REW
PLAY
P/STILLSTOP
a
now
exchange
appear
as
right
hand
the left hand
other programmes.
the stored programme
FF
1.Press the
CH-
1 to 3 to
hand
'05' for 5.
3.Press the OKbutton. The station stored in the
EXPANDHOLDUPDATEMODE
right
number under 10 is entered with
Any
REC
skip.
The
¢¸/¢º button to select the programme you want to
viewing station corresponding to the selected
programme number is shown
on
the
screen.
Press the
¡a/¡a
button to select SKIP.
3.Press the
¢¸/¢º
button to select ON
2.
If you select
4.Press the OKbutton. The
5.
Press the
steps
1 to
NUMBER buttons is still
Note
:
during
display
STORED will appear.
skipped
possible
item then
repeat
programme numbers with the
and they will be indicated by cyan
programme selection.
You cannot
skip
Press the MENUbutton
to normal TV
OFF.
¡a/¡a button to select first menu
4 to skip another programme.
The selection of the
numbers
or
ON, the selected station is skipped.
viewing.
the programme number 1.
repeatedly
or
TV/AVbutton
once
to return
Picture
adjustment
You
MENU 2
'O80OCONTRAST
'O60OBRIGHTNESS
can adjust picture contrast, brightness, colour intensity,
sharpness and tint (NTSC input only) to the levels you prefer.
・O50OCOLOROOOOOOOO
≥O50OSHARPNESS
1.
¥¥¥¥¥¥¥¥¥¥¥¥....
2.
O
()O}{OOKOMENU
3.
Repeatedly press the MENUbutton to select MENU 2.
Press the ¡a/¡a button to select the desired picture item.
Press the ¢¸/¢º button to make appropriate adjustments.
At this
setting
4.
point you can complete your adjustments
for immediate recall by following steps 4 to 6.
or
store your
Press the OKbutton.
POWER
MUTE
FAVORITEO1
PSM
FAVORITEO2
Q.VIEW
()OOKOMENU
5.
PR
OK
or
FAVORITE2with the
¡a/¡a button.
2options allow you to
picture settings for various
night.
The FAVORITE 1or FAVORITE
MENU
VOL
Select FAVORITE1
programme two entirely different
lighting conditions such as day and
VOL
TEXT
6.
PR
Press the OKbutton. The
display
STORED will appear.
SLEEP
To recall your preferred setting, press the PSMbutton until the
desired picture (STANDARD, FAVORITE 1or FAVORITE 2)
MIX
TIME
REVEALINDEX
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
REC
appears.The STANDARDpicture is programmed for good picture
reproduction at the factory and cannot be changed.
Other functions
TETRIS game
MENU 3
OOOOOOOOO
INPUTOOOOOOTV
CHILDOLOCKOOFF
AUTOOSLEEPOOFF
SYSTEMOOOOOOOOOO
spaces.
()OOKOMENU
POWER
MUTE
PSM
Q.VIEW
TV/AV
PR
MENU
VOL
OK
(option)
In the set with TETRIS function, the set can be used TETRIS
game. You can enjoy the TETRIS game with this set. To make a
good score, try to pile up bricks neatly without leaving empty
VOL
1.Repeatedly press the MENUbutton to select MENU 3.
2.Press the ¡a/¡a button to select TETRIS.
3.Press the OKbutton to display the TETRISmode.
4.Select and adjust SPEED (1 to 9), LEVEL (1 to 5)or MODE(0to
1) with the ¡a/¡a and ¢¸/¢º button. As the background of
TETRIS game mode, the TV reception mode in MODE0and
the muted picture in MODE1will appear.
5.Select START with the ¡a/¡a button then press the OKbutton
to start the game.
6.Rotate bricks with the OKbutton, move them to left or right
direction with the ¢¸/¢º button, and set them down straightly
with the ¡a button when playing the game. The game score will
automatically be displayed.
If you want to exit this mode while the game is being played
press the TV/AVbutton.
7.When the game is finished, select EXIT with the ¡a/¡a button if
you want to exit the TETRIS game. If not, select START.
8. Press the OKbutton.
TEXT
TV and AV modes
PR
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
UBBSLEEP
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
MIX
TIME
REVEALINDEX
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
1.Repeatedly press the MENUbutton to select MENU 3.
2.Press the ¡a/¡a button to select INPUT.
3.Press the ¢¸/¢º button to select TVorAV.
4.Press the OKbutton.
Alternatively you
TV/AVbutton.
can
select the TV
or
AV mode
by pressing
the
REC
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorised viewing.
1.Repeatedly press the MENUbutton to select MENU 3.
2.Press the ¡a/¡a button to select CHILD LOCK.
3.Press the ¢¸/¢º button on the remote control handset to select ON.
4.Press the OKbutton to return to normal TV viewing.
With the lock on, the display CHILD LOCK ONappears on the
if any button on the front panel is pressed while viewing the TV.
Auto
screen
sleep
If you select AUTO SLEEP ONthe set will automatically switch
itself to standby mode approximately ten minutes after a TV station
stops broadcasting.
1.Repeatedly press the MENUbutton to select MENU 3.
2.Press the ¡a/¡a button to select AUTO SLEEP.
3.Press the ¢¸/¢º button to select ON.
4.Press the OKbutton to return to normal TV viewing.
Other functions
Colour
M.VOL
MIC
ECHO
system setting
This set is adjusted for the main TV system in your area. Under
normal circumstances, select AUTO. If necessary (if input signal is
weak, colour and sound are poor), change the colour system by
using the instructions below.
1.Repeatedly press the MENUbutton to select MENU 3.
2.Press the ¡a/¡a button to select SYSTEM
3.Press the OKbutton to display the sub menu.
4.Press the ¡a/¡a button to select the correct colour system.
5.Press the OKbutton to store the setting. The display STORED
will appear.
.
POWER
MUTE
You can directly display the system selection mode by
SYSTEMbutton. And then repeat steps 4 to 5 above.
Q.VIEW
b.
adjusted the system as shown steps above, the colour
system appears in cyan when the current mode is displayed by
the OK button.
The colour system which the set cannot receive could be
selected but not operated.
pressing
Sleep
PR
MENU
VOL
OK
VOL
PR
MIX
TIME
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
For selecting your desired number of minutes, press the SLEEP
button several times or continuously. ---will appear on the screen,
followed by 120, 90, 60, 30, 20and 10.
TEXT
SYSTEM UBB
SLEEP
The timer
REVEALINDEX
EXPANDHOLDUPDATEMODE
begins to
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
REC
count down from the number of minutes selected.
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display SLEEP--- appears.
c.
When you switch the set off, the set releases the preset sleep time.
Karaoke
STARTLENGTHSP/LP
the
Note :
If you
a.
PSM
pressing
(option)
In the set with karaoke
monitor by connecting
VCR or VDP etc.
function, the
a
be used
as a
microphone (not supplied)
and
set
can
karaoke
using
a
Connect a microphone (¥O6.3 mm) to the MICsocket on the
front panel.
2. Switch the microphone on.
3. Turn the M.VOLknob clockwise to increase the microphone
volume or counterclockwise to decrease.
4. Press the ECHObutton to switch on (
) or off (
) the echo
effect function.
1.
Note : When a microphone connected to the set is moved too close to
the set, high-pitched feedback may be heard. Then, move the
microphone further from the set or decrease the microphone volume.
UBB sound
(option)
In the set with UBB function, the set can be used UBB sound. Only
a set with UBB sound option can perform this function. UBB (Ultra
Bass Booster) sound stresses and emphasizes heavy sound.
Press the UBBbutton to switch on or off the UBB sound. The disUBB ONor UBB OFF will appear.
play
Time
setting
Clock
MENU 4
CLOCKOOOOOO__:__OO
OFFOTIMEOOO__:__O
ONOOTIMEOOO__:__OO
ONOOPR.OOOOO1
The clock
uses
the 24 hour
system, and
time before
operating
before
on/off time functions.
using
must be set to the correct
the set. You must set the clock
correctly
()O}{O0_9OOKOMENU
1.
2.
Repeatedly press the MENUbutton to select
Press the ¡a/¡a button to select CLOCK.
hour and minute with
3.Adjust
the¢¸/¢ºbutton
or
NUMBER
buttons.
POWER
4.Press the OKbutton to return to normal TV
MUTE
MENU 4.
viewing.
PSM
Off time
123
Q.VIEW
456
The set
1.
789
2.
PR
0
automatically
VOL
VOL
hour and minute with the
¢¸/¢º
button
4.Press the OKbutton to return to normal TV
PR
MENU 4.
.
or
NUMBER
buttons.
OK
TEXT
preset time.
Repeatedly press the MENUbutton to select
Press the ¡a/¡a button to select OFF TIME
3.Adjust
MENU
switches off at the
viewing.
UBBSLEEP
On time
The set
MIX
TIME
REVEALINDEX
EXPANDHOLDUPDATEMODE
STARTLENGTHSP/LP
CH+
QSR
ON/OFF
1.
2.
switches
on
at the
Repeatedly press the MENUbutton
Press the ¡a/¡a button to select ON
hour and minute with the
3.Adjust
preset time and station.
to select MENU 4.
TIME.
¢¸/¢º
button
or
NUMBER
buttons.
REW
PLAY
FF
4.
CH-
automatically
P/STILLSTOP
Press the
¡a/¡a
button
NUMBER buttons to select the desired programme
button to select ON PR.then press the
REC
or
¢¸/¢º
number.
5.Press the OKbutton to return to normal TV
Note
viewing.
:
a.
In the event of power interruption (disconnection
failure), the clock, on time and off time must be reset.
b.
If the
same
off time
time is set for the
on
or
time and the off time,
power
only
the
operates.
put into standby mode with the POWER button
operate the on time function.
d. If the on time function activates, the TV will automatically switch
to the on time programme number, even during viewing.
c.
This set must be
on
e.
the remote control handset to
Two hours after the set is turned
will
automatically switch
has been pressed.
f.
Once the
the
on or
preset time.
back to
on by the on time function it
standby mode unless a button
off time is set, these functions
operate daily
at
Teletext
Teletext is an
teletext system
(option)
therefore only
receive the teletext broadcast.
optional function,
can
a
set with the
Teletext is
a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV can support the Simple, TOP and
FASTEXT systems. Simple mode consists of a number of pages which
are selected by directly entering the corresponding page number. TOP
and FASTEXT are more modern methods allowing quick and easy
POWER
MUTE
Switch on/off
PSM
123
Q.VIEW
456
TV/AV
789
PR
0
selection of teletext information.
Press the TEXTbutton to switch to teletext. The initial page or last
selected page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXTor TV/AVbutton to switch off teletext. The previous
mode reappears.
Simple
MENU
mode
selection
1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then reenter the correct page number.
2. The ¡a/¡a button can be used to select the preceding or
Page
TEXT
PR
UBBSLEEP
following
page.
TOP mode
MIX
TIME
REVEALINDEX
EXPANDHOLDUPDATE
STARTLENGTHSP/LP
CH+
CH-
QSR
REW
PLAY
P/STILLSTOP
ON/OFF
FF
REC
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block/group/page
selection
1. With theBLUEbutton you can progress from block to block.
2. Use the YELLOWbutton to proceed to the next group with
automatic overflow to the next block.
3. With the GREENbutton you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
¡a button can be used.
4.TheREDbutton permits to return to previous selection. Alternatively
the ¡a button can be used.
Direct page selection
to the Simple mode, you can select a page by
three digit number using the NUMBER buttons in
TOP mode.
Corresponding
entering it as a
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
selection
1. Press the INDEXbutton to select the index page.
2. You can select the pages which are colour coded along the
bottom line with the same coloured buttons.
3. Corresponding to the Simple mode, you can select a page by
entering its three digit page number with the NUMBERbuttons
in FASTEXT mode.
4. The ¡a/¡a button can be used to select the preceding or
following
page.
Teletext
(option)
teletext functions
Special
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the display.
solutions of riddles
Press this button
or
EXPAND
Selects double
height text.
enlarge the top half of the page.
button again to enlarge the bottom half of the
button again to return to the normal display.
Press this button to
Press this
Press this
page.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
will
display
change
to the page number.
Press this button to view the
updated
teletext page.
HOLD
Stops
the automatic page change which will occur if a teletext page
or more sub pages. The number of sub pages and the
consists of 2
sub page displayed is, usually, shown on the screen below the
time. When this button is pressed the stop symbol is displayed at
MIX
TIME
REVEAL
EXPANDHOLDUPDATE
the
top left-hand
change
corner
of the
screen
and the automatic page
is inhibited.
To continue press this button
again.
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
time at the
a
TV programme, press this button to display the
corner of the screen. Press this button
top right hand
the display. In the teletext mode, press this button
sub page number. The sub page number is displayed at
the bottom of the screen. To hold or change the sub page, press
the RED/GREEN, ¡a/¡a, or NUMBER buttons. Press again to exit
again
to
to select
remove
a
this function.
Connection of external
You
equipment
connect additional
can
equipment,
such
as
VCRs, camcorders
etc. to your set. Here shown may be somewhat different from your
set.
Aerial socket
1.
OUT
OUT
AUDIO
VIDEO
IN
IN
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
75Ω
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is stored.
3.
VCR
5.
Press the PLAY button
on
the VCR.
Audio/Video in/out sockets
1.
75Ω
OUT
OUT
AUDIO
VIDEO
IN
IN
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets of
the set.
2.
3.
Press the TV/AV button to select AV.
Press the PLAY button
The VCR
VCR
You
can
on
playback picture
the VCR.
appears
on
the
screen.
also record programmes received
out sockets.
by
the TV
on
video
tape via audio/video
Euro scart socket
If your set has the Euro scart
socket,
75Ω
1.
Connect the
euro
scart socket of the VCR to the Euro scart
socket of the set.
2.
VCR
Press the PLAY button
If your VCR outputs
mode automatically.
a
on
the VCR.
switching voltage
Otherwise, press the TV/AV button
handset to select AV. The VCR
the
screen.
the set will switch to AV
on
the remote control
playback picture
appears
on
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
channels
on some
No colour
Poor colour
Remote control does not work
Check these items and
adjust
try
to
these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF