LG | CF-29H90NM | LG CF-29H90NM Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
and
require
quote this
service.
Model number:
Serial number:
P/NO
:
3828VA0157B
(MC71B, 007A, T, Y/20Q, V,
W
TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off
Programme selection
Volume adjustment / Mute function
TV swivel function(option)
On screen language selection(option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning
Programme edit
Setting
Picture
9
adjustment
13
Sound adjustment
Sound adjustment
Stereo/Dual reception
NICAM reception(option)
Sound output selection
14
Other functions
TV and AV modes / Child lock
Auto sleep / Blue back (option)
Off timer / On timer
Tilt (option)
Auto demonstration
16
Degaussing(option)
Calling a programme
PIP
table
operation (option)
19
On and off / Programme selection for sub picture
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
LIST mode / TOP mode / FASTEXT mode
Special teletext functions
20
Connection of external equipment
Aerial socket
Euro scart socket(option)
Audio/Video in/out sockets
S-video/Audio in sockets (S-AV)
Woofer socket (option)
23
Troubleshooting
2
check list
25
Installation
Contents
Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC power to
the set. In the event of thunderstorms
out the aerial and mains
or
powercuts, please pull
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked
cover.
For the best
reception
an
+75§U on
the back
outdoor aerial should be used.
Location
Position your set
so
that
no
bright light
or
sunlight
falls
directly
onto the screen. Care should be taken not to expose the set to
any unnecessary vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow of air. Do not
cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
1
POWER
2
Contents
adjusted
with the buttons
on
the front
of the set.
MUTE
1
2
EYE
3
9
4
5
10
Before you use the remote control handset,
batteries. See the next page.
11
1.POWER
SRS
6
3
7
8
9
TV/AV
PIP
0
TEXT
MENU
Remote control handset
switches the set
on
from
standby
12
16
or
off to
please
install the
standby.
2.MUTE
switches the sound
on or
off.
3.NUMBER BUTTONS
PR
switch the set
VOL
OK
from
on
standby
select
directly
or
a
number.
13
VOL
4.PIP BUTTONS
PR
(option)
PIP
PR-
switches the sub
PR+SWAPINPUT
4
PSM
SSM
DUAL
LIST
15
5
SIZE
6
14
STILL POSITION9/4 PIP
on or
off.
PR+/selects
a
programme for the sub
picture.
SWAP
alternates between main and sub
T
X
T
PIP
16
M
(L)
(R)
CH+
8
picture
V
C
R CH
REW
SP/LPON/OFF
PLAY
FF
selects the
REC
mode for the sub
input
picture.
SIZE
adjusts
P/STILLSTOP
picture.
INPUT
the sub
picture
size.
STILL
freezes motion of the sub
picture.
POSITION
relocates the sub
picture
in clockwise direction.
9/4 PIP
switches
START LENGTHSP/LPON/OFF
8
V
C
R
CH+
CH
QSR
REW
PLAY
P/STILLSTOP
FF
REC
sub
on or
off the programme
scan
mode
through
pictures.
5.PSM (Picture Status
recalls your preferred
6.SSM
Memory)
picture setting.
(Sound Status Memory)
preferred sound setting.
recalls your
X
T
M
7
(L)SWING (R)
SP/LPON/OFF
(With TELETEXT)
7.SWING (L) (R)(option)
to turn the TV set at left
8.VCR BUTTONS
control
4
a
or
right
direction
(option)
LG video cassette recorder.
by
15
degrees.
9
or
4
Location and function of controls
9.
EYE
switches the
:
Eye
function
off.
on or
No Function.
10. SRS
(Sound
1
Retrieval
System)
switches the SRS function
on or
POWER
2
off.
MUTE
1
2
3
EYE
4
5
6
SRS
7
8
9
TV/AV
PIP
0
9
11. TV/AV
3
selects TV
clears the
or
10
AV mode.
menu
from the
11
screen.
MENU
12
12. MENU
calls
13.
or
clears the main
menu.
¡a/¡a (Programme Up/Down)
switches the set on from standby.
selects
a
programme
or a menu
PR
VOL
PR
¢¸/¢º (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
PR-
or
PSM
displays
SIZE
DUAL
LIST
14
STILL POSITION9/4 PIP
PIP
the current mode.
(L)
8
selects
SSM
15
56
14.DUAL
selects the
PR+SWAPINPUT
4
OK
accepts your selection
13
VOL
OK
item.
dual
broadcast.
language during
language
sound during stereo broadcast.
V
C
R CH
SP/LPON/OFF
(R)
CH+
REW
PLAY
FF
P/STILLSTOP
REC
mono
15.LIST
displays
the programme table.
16.TELETEXT BUTTONS
These buttons
are
For further details,
(option)
used for teletext.
see
PIP
the 'Teletext' section.
(L)SWING (R)
7
In teletext mode, the PR+/-, SWAP and INPUT buttons
used for teletext function.
Note
:
SP/LPON/OFF
are
PIP
LIST
0
MENU
12
15
Battery
installation
The remote control handset is
powered by
two AA
PR
type batteries.
VOL
To load the batteries, turn the handset over and slide open the
battery compartment. Install two batteries as indicated by the
polarity symbols(
+
and
-
)
marked inside the compartment.
13
VOL
OK
PR
PR-
PR+SWAPINPUT
4
PSM
56
SIZE
SSM
14
DUAL
STILL POSITION9/4 PIP
PIP
START LENGTHSP/LPON/OFF
8
V
C
R
CH+
CH
Note
:
To avoid
damage from possible battery leakage,
batteries if you do not plan to
extended period of time.
use
QSR
REW
PLAY
P/STILLSTOP
FF
REC
the
remove
the remote control handset for
an
(Without TELETEXT)
5
Location and function of controls
Front
*
panel
CF-29H90 series
POWER
IN3
STAND-BY
TV/AV
*
MENU
114
CF-29C84 series
OK
5
VOL
PR
6
7
1
S-INPUT
VIDEO
8
(MONO)(L)AVD O(R
32 910
EYE
MENU
VIDEOL / MONO
POWER
R
OK
VOL
PR
STAND BY
S-VIDEO
AUDIO
AV3
9
*
1
234567
810
CF-29H24, CF-29/25C64 series
NA TU RAL ALGORITHM EYE
AV3
VIDEO
(L/MONO)-AUDIO-(R)
S-VIDE O
MENU
OK
-VOL+
-PR+
POWER
*
STAND BY
12
CF-29H64 series
45678109
3
NA TURAL
AV3
VIDEO
POWER
?
MENUOK
VOL
PR
S-VIDEO
(L/MONO)-AUDIO-(R)
1
2
3
CF-29H74 series
456
7
L/MONO
810
9
VOL
PR
ALGORITHM
EYE
STAND BY
R
3
1
*
MENUOK
EY E
STAND BY
NATURAL
AV2
AUDIO
S-VIDEO VIDEO
POWER
ALGORITHM
2 12
4567
810
9
CF-34C60/61/62/63/64 series
AV3
VIDEO
POWER
AUDIO
L/MONO
R
STAND BY
S-VIDEO
NATURAL
EYE
ALGORITHM
MENUOK
12
MAIN POWER
switches the set on or off.
2. AUDIO/VIDEO IN SOCKETS (AV3 or AV2)
Connect the audio/video out sockets of
external equipment to these sockets.
3. S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket. Connect the
audio out sockets of the S-VIDEO VCR to the
audio sockets as in AV3.
4.MENU
calls or clears the main menu.
5. OK
accepts your selection or displays the current mode.
1.
6.VOLUME UP/DOWN
adjusts the volume.
6
3
VOL
PR
4567
adjusts
menu
10 8
settings.
9
7.PROGRAMME UP/DOWN
switches the set on from standby.
selects a programme or a menu item.
8.STANDBY INDICATOR
illuminates red when the set is in standby mode.
9. NATURAL ALGORITHM EYE(option)
adjusts picture according to the surrounding
conditions.
10.REMOTE CONTROL SENSOR
11. TV/AV (option)
select TV or AV mode.
clears the menu from the screen.
12. HEADPHONE SOCKET (option)
Connect the headphone plug to this socket.
Basic
operation
Contents
On and off
1.Press the main power button to switch the set on.
2.If the set is in standby mode, press the POWER, ¡a/¡a
NUMBER buttons on the remote control handset to switch it
or
on
fully.
3.Press the POWERbutton on the remote control handset.
The set reverts to standby mode.
4.Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
programme number with the
Volume
adjustment
Press the
¢¸/¢º
button to
adjust
¡a/¡a
or
POWER
MUTE
1
2
3
4
5
6
SRS
7
8
9
TV/AV
NUMBER
the volume.
MENU
0
Mute function
Press the MUTEbutton. The sound is switched off and the display
appears. You can cancel it by pressing the MUTE, ¢¸/¢º, SSM,
DUALor SRSbutton.
PR
TV swivel
function(option)
VOL
You can turn the TV set at left or right direction by 15 degrees
that the watching degree is suitable for your position.
1.Press the SWING(L)button.
The TV set is turned at left direction by 15 degrees.
2.Press the SWING(R)button.
The TV set is turned at right direction by 15 degrees.
OK
so
VOL
PR
SSM
DUAL
Note : If, while the Euro scart socket of the set is connected on the
additional equipment, this function is used,this socket can
disconnected.
On
screen
language
selection
The menu can be displayed
First select your language.
on
the
(option)
screen
in the desired
(L)
SWING
(R)
language.
1.Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º
button to select the Station menu icon
or
Function menu icon
3.Press the OK button to display the Stationmenu or Special
.
functionmenu.
4.Press the ¡a/¡a button to select Language.
5.Press the ¢¸/¢º button to select the desired language.
All the on screen displays will appear in the selected language.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
Contents
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select each menu icon.
The selected menu icon changes from green to purple.
3.Press the OKbutton to display the sub menu.
4.Press the ¡a/¡a button to select a menu item.
The selected menu item changes from green to purple.
5.Press the ¢¸/¢º button to change the setting of a menu item or
OKbutton to display the sub menu.
Note :
a.
The menus automatically disappear in about 1 minute if you do
not press a button.
b. In the AV mode, the Station menu icon is not selected.
In the teletext mode, menus are not displayed.
c.
d. In some models, the menu item Language is displayed on
the Special function menu.
In some models, the menu items Super Woofer, CCTV,
e.
Language,Degaussing,AVL,Tilt,Auto AV,YNR, ¡¡¡ª
¡ª
are not displayed on the screen.
or
EYE
Station
MENU
AutoOprogramme
ManualOprogramme
ProgrammeOedit
LanguageOOOOEnglish
¡a¡a
PR
VOL
OK
OK
Station
TV/AV
menu
(TV mode)
VOL
Picture
PR
Standard
Game
Mild
Cinema
User
Eye
¡a¡a
OK
Picture
TV/AV
menu
Sound
EqualizerOOOOOOCinema
Station
BalanceOOOOOOOOOOOO00
OK
¢¸¢º
SuperOwooferOOOOOOOOn
TV/AV
SRSOOOOOOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOff
Main
menu
¡a¡a ¢¸¢º
Sound
SpecialOfunction
AutoOsleepOOOOOOOOOff
BlueObackOOOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
TiltOOOOOOOOOOOOOOO00
DemonstrationO
CCTVOOOOOOOOOOOOOOOff
DegaussingOOOOOOOOOff
¡a¡a ¢¸¢º
OK
Function
8
TV/AV
menu
OK
TV/AV
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
BlueObackOOOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
TiltOOOOOOOOOOOOOOO00
DemonstrationOOOOOOOO
¡a¡a ¢¸¢º
OK
Function
TV/AV
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme
numbers (00 to 99). Once you have preset the stations, you will be
able to use the ¡a/¡a or NUMBER buttons to scan the stations you
programmed.
Stations
can
be tuned
Auto programme
using
automatic
or
manual modes.
Station
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
LanguageOOOOEnglish
tuning
All stations that can be received are stored by this method. It is
recommended that you use auto programme during installation of this set.
1. Press
2.Press
3.Press
4.Press
5.Press
Contents
¡a¡a
OK
TV/AV
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Station menu icon
the OK button to display the Stationmenu.
the ¡a/¡a button to select Auto programme.
the OK button to display the Auto programmemenu.
.
AutoOprogramme
StorageOfromOOOOOOOO01
SystemOOOOOOOOOOOOAUTO
NormalOsearchO
TurboOsearchO
¡a¡a ¢¸¢º
OK
8.
button to select Storage from. Select the
number with the ¢¸/¢º button or
number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the ¡a/¡a button to select System.Select a TV system
with the ¢¸/¢º button; AUTO, M, BG, Ior DK.
Press the ¡a/¡a button to select Normal search or Turbo search.
9.
Note:
a.TURBO SEARCH is further faster than NORMAL SEARCH
and NORMAL SEARCH will automatically store all receivable
stations. TURBO SEARCH is faster but will store them in the
system selected.
b.NORMAL SEARCH and TURBO SEARCH is optional
function. In some models, the menu item Start is displayed
instead of Normal search and Turbo search. If you select
this item by using ¡a/¡a button and then press OKbutton,
auto programming will start.
Press the OKbutton to begin auto programming.
6.
Press the
¡a/¡a
beginning programme
NUMBER buttons. Any
7.
1
2
3
4
5
6
7
8
9
TV/AV 0~9
TV/AV
MENU
0
PR
VOL
OK
VOL
PR
AutoOprogramme
StorageOfromOOOOOOOO04
SystemOOOOOOOOOOOOAUTO
PR.O27OOCHO30OOOOOO{{{
..................
OOK
All receivable stations are stored.
The programme number and channel number being searched
appear below the display System. The channel number is
assigned and stored with CHfor television or CC for cable
channels.
To stop auto
programming, press
the OKbutton.
When auto programming is completed, the Programme edit
mode appears on the screen with the channel number. See the
'Programme edit' section to edit the stored programme.
10. Press the TV/AVbutton to return to normal TV viewing.
Note: If there is a sound noise in some channels after auto
programming is completed, re-adjust System to M, BG, I or DK in
Manual programme tuning. Refer to 'Manual programme tuning.'
9
Setting up
Station
Manual programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
LanguageOOOOEnglish
¡a¡a
TV stations
OK
tuning
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a
station name with five characters to each programme number.
TV/AV
1.
Press the MENUbutton to
2.Press the
¢¸/¢º
display
the Main
button to select the Station
3.Press the OK button to
display
menu.
menu
icon
.
the Stationmenu.
to select Manual programme.
5.Press the OK button to display the Manual programme
4.Press the
¡a/¡a button
menu.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
1
2
3
4
5
6
7
8
9
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
¡a¡a ¢¸¢º
OK
TV/AV
¡a/¡a button to select System.Select a TV system
¢¸/¢º button; M, BG, Ior DK.
7.Press the ¡a/¡a button to select Channel. Press the ¢¸/¢º
button to select V/UHFor CATVas required. If possible, then
select the channel number directly with the NUMBER buttons.
8.Press the ¡a/¡a button to select Search.
9.Press the ¢¸/¢º button to commence searching. If a station is
6.Press the
with the
MENU
0
found the search will stop.
PR
10.If this station is the
VOL
OK
PR
VOL
one required, press the ¡a/¡a button to
Select
the desired programme number with
Storage.
the ¢¸/¢º button or NUMBER buttons. Any number under 10 is
select
numeric '0' in front of it, i.e. '05' for 5.
display Stored will appear.
12.To store another station repeat steps 6 to 11.
entered with
a
11.Press theOKbutton to store it. The
Assigning
station
a
1.Press the
¡a/¡a
name
button to select Name.
2.To select your desired first character, press the ¢º button then
¡a button. You can use the alphabet Ato Z, a blank, ., +, and
_
the numeric 0to 9.
With the
¡a button you can select in the opposite direction.
position by pressing the ¢º button and
3.Select the next
then
take your choice of the second character, and so on.
4.Press the OKbutton to select Storage. Select the desired
programme number with the
buttons.
¢¸/¢º
5.Press theOKbutton to store it. The
6.To
10
assign
another station
name
button
or
NUMBER
Stored will appear.
repeat steps 1 to 5.
display
TV stations
Setting up
Auto AV
setting (option)
optional function,
voltage
the VCR connected to Euro scart socket. The set is
switched to AV-1 mode when
to
keep
on
watching
Station
Station
if your VCR outputs a switching
when it is switched to playback, select Auto AV On with
Auto AV is
an
AV
signal
is
automatically
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
LanguageOOOOEnglish
But if you want
input.
TV mode, set Auto AV to Off.
¡a¡a
OK
TV/AV
¡a/¡a button to select Auto AV.
2.Press the ¢¸/¢º button to select Onor Off.
3.Press the ¡a/¡a button to select Storage. Select the desired
programme number with the ¢¸/¢º button or NUMBER
1.Press the
buttons.
4.Press theOKbutton. The
display Stored will appear.
5.To set another programme repeat steps 1 to 4.
Press the TV/AVbutton to return to normal TV
Option:
Auto AV is
displayed
Fine
function. In
optional
on
the
some
viewing.
models, this
menu
item is not
screen.
1
2
3
4
5
6
7
8
9
tuning
Normally
fine
1.Repeat
TV/AV
MENU
0
tuning
is
only
necessary if
'Manual programme
is poor.
reception
tuning' steps
1 to 5.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
PR
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
VOL
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
OK
VOL
StorageOOOOOOOOOOOOO12
PR
¡a¡a ¢¸¢º
2.Press the
¡a/¡a
TV/AV
button to select Fine. Press the
fine tune for the best
3.Press the
OK
¡a/¡a
picture
¢¸/¢º
button to
and sound.
button to select
Storage. Select
the desired
programme number with the ¢¸/¢º button or NUMBER
buttons.
4.Press theOKbutton. The display Stored will appear.
5.Press the TV/AVbutton to return to normal TV
finely tuned programme will
during programme selection.
The
be indicated
viewing.
by yellow
number
11
Setting up
Station
menu
Programme
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
LanguageOOOOEnglish
¡a¡a
OK
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy to the next programme numbers.
1. Press
2.Press
3.Press
4.Press
5.Press
TV/AV
TV stations
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Station menu icon
the OK button to display the Stationmenu.
the ¡a/¡a button to select Programme edit.
the OK button to display the Programme editmenu.
.
ProgrammeOedit
¢º 00OCHO05
OO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
? Delete
? Move
1
2
3
4
5
6
7
8
9
¡a¡a ¢¸¢º
OK
? Copy
? Skip
TV/AV
Deleting
TV/AV
MENU
0
a programme
1.Select a programme to be deleted with the ¡a/¡a or ¢¸/¢º button.
2.Press the RED button twice.
The selected programme is deleted and all the following
programmes are shifted up one position.
3.Press theTV/AVbutton to return to normal TV
Copying
a
1.Select
programme
programme to be
2.Press the GREEN button.
VOL
OK
PR+
copied
with the
¡a/¡a or ¢¸/¢º
button.
position.
viewing.
one
VOL
PR
PR-
a
All the following programmes are shifted down
3.Press theTV/AVbutton to return to normal TV
PR
viewing.
SWAPINPUT
Moving
a programme
1.Select a programme to be moved with the ¡a/¡a or ¢¸/¢º button.
2.Press the YELLOW button. The selected programme is in
yellow.
3.Move the programme to the desired programme number with
the ¡a/¡a button.
The selected programme
the direction selected.
4.Press the YELLOW button
moves
again
through
the programme list in
to release this function.
5.Press theTV/AVbutton to return to normal TV
viewing.
Skipping
a programme
1.Select a programme to be skipped with the ¡a/¡a or ¢¸/¢º button.
2.Press the BLUE button.
The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped
programme.
The programme returns to green and the skip is cancelled.
4.Press theTV/AVbutton to return to normal TV viewing.
During programme selection,
with the
¡a/¡a
button the
skipped
not be found. If you want to find the skipped
programme
programme directly enter the programme number with the
NUMBER buttons or select it in the programme edit or table mode.
can
12
Picture
You
adjustment
select your preferred picture setting; Standard, Game,
as you prefer. Also you can adjust picture contrast,
brightness, colour intensity, sharpness and tint (NTSC input only)
to the levels you prefer.
can
Mild, Cinema,
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Picture menu icon
3.Press the OK button to display the Picturemenu.
Contents
Picture
Picture
menu
Standard
Game
Mild
Cinema
User
Eye
.
¡a¡a
OK
TV/AV
Standard, Game, Mild, Cinema, User
1.Press the ¡a/¡a button to select Standard, Game, Mild,
Cinema or User.
2.Press the OK button.
Picture
ContrastOOOOOOOOOOO100
BrightnessOOOOOOOOOO50
ColourOOOOOOOOOOOOOO50
SharpnessOOOOOOOOOOO50
TintOOOOOOOOOOOOOOOO00
YNROOOOOOOOOOOOOOOOOff
EYE
...................
¡a¡a ¢¸¢º
OK
TV/AV
3.Press the ¡a/¡a button to select the desired picture item.
4.Press the ¢¸/¢º button to make appropriate adjustments.
5.Press the OK button. In User menu only, the display Stored
will appear.
TV/AV
MENU
These picture settings, except for User, are temporarily stored
and if the TV switches off and then on, the adjusted level
returns to the factory preset settings.
Note :
Tint can be selected for the NTSC only.
a.
b. The picture item YNR reduces picture noise if you select On
YNR is optional function. In some models, this menu item is
c.
not displayed and it is impossible to operate it.
PR
VOL
OK
VOL
PR
Eye(option)
This set will
automatically adjust the picture according to the
surrounding conditions. This will enable you to enjoy the most
suitable picture according to the surroundings.
1.Press the ¡a/¡a button to select Eye.
2.Press the OK button.
Or you can display the Eye mode by
PSM
pressing
the EYEbutton
once.
Eye
EyeOOOOOOOOOO
On
ContrastOOOOOOOOOOO100
BrightnessOOOOOOOOOO50
ColourOOOOOOOOOOOOOO50
SharpnessOOOOOOOOOOO50
RedOOOOOOOOOOOOOOOOO
Blue
¢¸¢º
OK
TV/AV
3.Press the ¢¸/¢º button to select On
4.Press the OK button.
or
Off.
To recall your preferred setting, press the PSMbutton until the
desired picture (Standard, Game, Mild, Cinema, User)
appears.Standard, Game, Mildand Cinema are programmed
at the factory for good picture reproduction appropriate to each
programme character.
13
Sound
Sound
menu
Sound
Sound
You
EqualizerOOOOOOCinema
BalanceOOOOOOOOOOOO00
SuperOwooferOOOOOOOOn
SRSOOOOOOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOff
OK
¡a¡a
can
adjustment
adjustment
select
your
Contents
sound
preferred
setting; Cinema, Sports,
as you prefer. Also you can adjust the sound frequency to the levels you prefer. The SRS (Sound Retrieval System) creates an all around sound as in a concert hall and super
woofer sound stresses and emphasizes bass.
Music, Speech,
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Sound menu icon
3.Press the OK button to display the Soundmenu.
TV/AV
Equalizer
1.Press the
2.Press the
.
¡a/¡a button to select Equalizer.
¢¸/¢º button to select Cinema, Sports, Music,
Speech or User.
3.Press the OK button.
In case of Cinema, Sports, Music, Speech, each corresponding equalizer is displayed on the screen. Cinema, Sports,
Musicand Speech are programmed at the factory for good
sound reproduction appropriate to each programme character.
In case of User, select the sound band with the ¢¸/¢º button and
make appropriate sound level with the ¡a/¡a button as you prefer.
Equalizer
Equalizer
+10
SRS
Cinema
Sports
Sports
0
Music
TV/AV
+10
Cinema
Speech
User
User
-10
0.1 0.3
MENU
¡a¡a
OK
VOL
OK
PR
SSM
VOL
-10
1.0 3.3 10K
0.1 0.3
TV/AV
¡a¡a ¢¸¢º
(Cinema, Sports, Music,
Speech)
PR
0
Music
Speech
OK
1.0 3.3 10K
TV/AV
(User)
4.Press the OK button. In case of User only, the display Stored
will appear.
Balance
1.Press the ¡a/¡a button to select Balance.
2.Press the ¢¸/¢º button to adjust the balance level.
3.Press the OKbutton. The display Stored will appear.
Super woofer(option)
1.Press the ¡a/¡a button to select Super woofer.
2.Press the ¢¸/¢º button to select On or Off.
3.Press the OKbutton. The display Stored will appear.
Option :Super Woofer is optional function. In some models, this
menu item is not displayed on the screen.
SRS
1.Press the ¡a/¡a button to select SRS.
2.Press the ¢¸/¢º button to select On or Off.
3.Press theTV/AVbutton once or OK button twice to return to
normal TV viewing.
Or directly select the SRS On or Offmode with the SRSbutton
alternately as shown below then press the OKbutton to return to
normal TV viewing.
On
SRS
AVL(option)
AVL (Auto Volume Leveler) automatically keeps
volume level even if you change programmes
on an
equal
1.Press the ¡a/¡a button to select AVL.
2.Press the ¢¸/¢º button to select On or Off.
3.Press the OKbutton. The display Stored will appear.
To recall your preferred setting, press the SSMbutton until the
desired sound (Cinema, Sports, Music, Speech, User)
appears.
14
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing theDUAL button. In mono reception the depth
of sound is improved. To switch back to stereo, press the DUAL
button again.
mono
Language selection for dual language broadcast
If a programme received in two languages
switch to DUAL I, DUALIIor DUALI IIby
repeatedly.
DUALI sends the
DUALIIsends the
DUALI IIsends
NICAM
(dual language), you can
pressing the DUALbutton
primary broadcast language to the loudspeakers.
secondary broadcast language to the loudspeakers.
a
separate language
to each
loudspeaker.
reception(option)
NICAM is optional function, if your set is equipped with the receiver
for NICAM reception, the high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the DUALbutton repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select DUAL I, DUAL
IIor DUALI IIor MONO. When FM mono is selected the
display MONOappears on the screen.
DUAL
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loudspeakers.
Repeatedly press
the DUALbutton to select the sound output.
L+R:Audio signal from audio L input is sent to left loudspeaker
and audio signal from audio R input is sent to right loud-
speaker.
signal
speakers.
Audio signal
speakers.
L+L: Audio
from audio L
input
is sent to left and
right
loud-
R+R:
from audio R
input
is sent to left and
right
loud-
15
Other functions
Special
TV and AV modes
SpecialOfunction
function
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
menu
AutoOsleepOOOOOOOOOff
BlueObackOOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
TiltOOOOOOOOOOOOOOO00
Demonstration
¡a¡a ¢¸¢º
OK
TV/AV
Contents
¡
¡
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Input.
5.Press the ¢¸/¢º button to select TV,AV-1,AV-2,AV-3 orS-AV.
The four AV modes are :
AV 1 :VCR connected to the Euro scart socket or phono jack
on the back
AV 2 :VCR connected to the AV2sockets on the back or on
the front panel
AV 3 :VCR connected to the AV3sockets on the front panel
or on the back
S-AV:VCR connected to the AUDIOand S-VIDEOsockets on
the front panel
6.Press the OKor TV/AVbutton.
To return to TV mode from AV mode press the ¡a/¡a or NUMBER buttons.
.
1
2
3
4
5
6
7
8
9
TV/AV
Alternatively you
can
select the TV
TV/AVbutton.
or
AV mode
by pressing
the
MENU
0
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorised viewing.
1.Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Child lock.
5.Press the ¢¸/¢º button on the remote control handset to select On.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
PR
VOL
OK
PR
VOL
With the lock on, the display Child lock appears on the screen if
any button on the front panel is pressed while viewing the TV.
Auto
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
1.Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Auto sleep.
5.Press the ¢¸/¢º button on the remote control handset to select On.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
Blue back
(option)
Blue back is an optional function.
If you have set Blue back to On, the blue background appears
the screen when there is no broadcasting signal.
on
1.Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Blue back.
5.Press the ¢¸/¢º button to select On.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
Note : This function does not operate while the sub picture is
displayed on the screen.
.
16
Other functions
Off timer
The off timer automatically switches the set to
preset time elapses.
standby
after the
SpecialOfunction
Special
InputOOOOOOOOOOOOOOTV
function
ChildOlockOOOOOOOOOff
menu
AutoOsleepOOOOOOOOOff
BlueObackOOOOOOOOOOff
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Off timer.
5.Set the desired time period with the ¢¸/¢º button.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
TiltOOOOOOOOOOOOOOO00
Demonstration
¡a¡a ¢¸¢º
OK
¡
¡
TV/AV
On timer
The set
automatically
switches
on
after the preset time
elapses.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select On timer.
5.Set the desired time period with the ¢¸/¢º button.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
POWER
You can set the on/off timer from 10 minutes up to 12 hours 50
minutes in 10 minutes steps. The timer begins to count down from
the selected time period.
Note :
a.
This set must be put into standby mode with the POWER
button on the remote control to operate the on timer function.
b. Two hours after the set is switched on by the on timer function
it will automatically switch back to standby mode unless a
button has been pressed.
c.
To view the remaining on/off time, select the Special function menu.
d. To cancel the set on/off time, set the on/off timer to --:--.
e.
When you switch the main power off, the on/off time is reset.
TV/AV
MENU
PR
VOL
OK
Tilt
(option)
VOL
PR
Tilt is an optional function.
The TV picture may tilt to the left or right if the TV set moves to
another position. This function can be used to compensate the tilt.
1. Press
2.Press
3.Press
4.Press
5.Press
6.Press
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Function menu icon
the OK button to display the Special functionmenu.
the ¡a/¡a button to select Tilt.
the ¢¸/¢º button to adjust the tilt.
the OKor TV/AVbutton to return to normal TV viewing.
.
Auto demonstration
Auto demonstration allows you to review all the
med in the set.
1. Press
2.Press
3.Press
4.Press
5.Press
menus
program-
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Function menu icon
the OK button to display the Special functionmenu.
the ¡a/¡a button to select Demonstration.
the OKbutton to start the demonstration.
When the demonstration reaches the last
from the beginning.
.
display,
it starts
again
To stop auto demonstration, press any button.
17
Other functions
Special
SpecialOfunction
function
AutoOsleepOOOOOOOOOff
menu
BlueObackOOOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
TiltOOOOOOOOOOOOOOO00
DemonstrationO
CCTVOOOOOOOOOOOOOOOff
DegaussingOOOOOOOOOff
¡a¡a ¢¸¢º
OK
TV/AV
Degaussing(option)
¡ª
¡ª
Owing to the super large Braun Tube in this TV set the magnetic
field of the earth may influence on the color purity of picture by
neighbor magnetic substance or installation direction of the TV set.
The stripes may appear on the screen or the color may not be
equal in the corner. You can enjoy the program in high color quality
by operating the Degaussing.
1. Press
2.Press
3.Press
4.Press
5.Press
6.Press
1
2
3
4
5
6
7
8
9
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Function menu icon
the OK button to display the Special functionmenu.
the ¡a/¡a button to select Degaussing.
the ¢¸/¢º button to select On.
the OKor TV/AVbutton to return to normal TV viewing.
.
Option :
Degaussing is optional function.
not displayed on the screen.
TV/AV
Calling
You
0
MENU
can
some
models, this
menu
item is
programme table
a
displaying
In
check the programmes stored in the memory
the programme table.
Displaying programme
by
table
Press the LISTbutton.
The programme table appears on the screen. One programme
table contains ten programmes as below.
ProgrammeOtable
PR
VOL
OK
¢"00OCHO05 OOO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
VOL
PR
¡a¡a ¢¸¢º
LIST
OK
TV/AV
Note :
a.
You may find some blue programmes. They are skipped in the
Programme edit mode.
b. Some programme numbers with the mark
shown in the
programme table indicate there is no station name assigned.
-----
Selecting
a
programme in the programme table
Select upper or lower programme with the ¡a/¡a button and left or
right programme with the ¢¸/¢º button. The colour of normal
programmes is green and skipped programme is blue.
Then press the OKbutton.
The set switches to the chosen programme number.
Paging through
a
programme table
There are ten programme table pages in which contain 100
programmes. Pressing the ¡a/¡a or ¢¸/¢º button repeatedly turns
the pages.
Switching
back to TV mode
Press the TV/AVor NUMBER buttons
mode.
18
during programme
table
PIP
Option:
PIP is optional function,
so
that
operation (option)
only
the set with PIP function
Contents
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Programme
selection for sub
picture.
picture
Press the PR +/-buttons. The selected programme number is
displayed at the left upper side of sub picture.
Input
mode selection for sub
picture
Press the INPUTbutton while the sub
main picture.
picture
remains within the
Each time this button is pressed, each input mode for the sub
as shown below at the left upper side of sub
picture is displayed
picture.
Programme
Swapping
number
AV-2
between main and sub
Press theSWAPbutton to
Sub
PIP
AV-1
picture
exchange
AV-3
S-AV
pictures
the main and sub
pictures.
size
Repeatedly press the SIZEbutton to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture,
followed by 1/9.
Sub
picture
PR-
PR+
SWAPINPUT
freeze
Press the STILLbutton to freeze motion of the sub
Press this button again to restore motion.
picture.
SIZE
STILLPOSITION 9/4 PIP
PIP
Sub
picture position change
Press the POSITIONbutton repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 9 or 4
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the 9/4 PIP button. 9 sub pictures appear and search all the
stored stations.
Press this button again. At this time 4 sub pictures search them.
Press the 9/4 PIPbutton once more. The 9 or 4 sub pictures switch
off.
If you press the SWAPbutton while the desired station is being
are exchanged so the station
being searched appears on the main picture.
searched, the main and sub picture
19
Teletext
Teletext is
an
teletext system
Teletext is
a
(option)
Contents
optional function,
can
therefore
only
a
set with the
receive the teletext broadcast.
free service broadcast
information
gives up-to-the-minute
programmes, share prices
by
on
most TV stations which
news,
and many other
The teletext decoder of this TV
can
weather, television
topics.
support the LIST, TOP and
FASTEXT systems. LIST
pages which are selected
number. TOP and
(standard teletext) consists of a number of
by directly entering the corresponding page
FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
Switch on/off
TV/AV
Press the TEXTbutton to switch to teletext. The initial page
selected page appears on the screen.
Two page numbers, TV station name, date and time
TEXT
are
last
displayed
headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXTor TV/AVbutton to switch off teletext. The previous
on
the
or
screen
mode reappears.
PR
LIST mode
PR
If the TV is in TOP
or
FASTEXT mode, press the
M
button to
switch to LIST mode.
Page
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then re-
2.
The
enter the correct page number.
M
20
selection
1.
¡a/¡a button
following page.
can
be used to select the
preceding
or
Teletext
(option)
Programming a colour button
Four teletextpage numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Using
2.
programme.
Wait until the page is displayed on the screen and press the
OKbutton. The page numbers in the colour boxes along the
the NUMBER buttons, select the page you wish to
bottom of the
screen
change
to "000?".
3.
Press
4.
you can
The three other coloured buttons
a
colour button to store the page number. From now on,
select this page with the same coloured button.
are
programmed
in the
same
way.
TOP mode
The
1
2
3
4
5
6
7
8
9
four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
user
guide displays
0
and the blue field indicates the next block.
Group/block/page
1.
2.
3.
selection
With theBLUEbutton you can progress from block to block.
Use the YELLOWbutton to proceed to the next group with
automatic overflow to the next block.
PR
With the GREENbutton you can proceed to the next existing
page with automatic overflow to the next group. Alternatively
the ¡ªbutton can be used.
OK
4.TheREDbutton
Alternatively the
permits to
¡button can be
return to
previous
PR
selection.
used.
PR-
PR+
SWAPINPUT
Direct page selection
Corresponding to the LIST teletext mode, you can select a page by
entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
1.
selection
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2.
You
3.
Corresponding to the LIST teletext mode,
page by entering its three digit page number
can
along
the
you can select a
with the NUMBER
buttons in FASTEXT mode.
4.
The
¡a/¡a
button
can
be used to select the
preceding
or
following page.
21
Teletext
Special
(option)
teletext functions
REVEAL
RPress this button to display concealed information, such
as
solutions of riddles
Press this button
the
puzzles.
or
to remove the information from
again
display.
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
page.
Press this button
again
to return to the normal
the
display.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for
will appear at the
teletext page. The display
top left hand corner of the screen. When the updated
will change to the
page is available then display
the
new
page number.
Press this button to view the
HOLD
updated
teletext page.
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
Stops
usually,
shown
button is
pressed
left-hand
corner
change
on
the
is inhibited.
To continue press this button
T
X
T
below the time. When this
screen
the stop symbol is displayed at the top
of the screen and the automatic page
again.
MIX
Displays
picture.
the teletext pages
To switch the TV
picture
superimposed
off press this button
on
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to remove the
display.
In
the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the
bottom of the
screen.
To hold
or
press the RED/GREEN, ¡a/¡a
Press again to exit this function.
22
the sub page,
NUMBER buttons.
change
or
Connection of external
You
can
connect additional
such
equipment,
equipment
as
Contents
VCRs, camcorders
etc. to your set. Here shown may be somewhat different from your
set.
VIDEO
Aerial socket
(MONO)
L
ANT IN
75Ω
1
AUDIO
R
OUTIN(AV2)
1.
2.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
5.Press the PLAYbutton on the VCR.
Euro scart
VCR
socket(option)
VIDEO
(MONO)
L
ANT IN
75Ω
1
AUDIO
R
OUTIN(AV2)
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching
AV-1 mode automatically.
voltage
the set will switch to
VCR
Otherwise press the TV/AVbutton on the remote control
handset to select AV-1. The VCR playback picture appears on
the
screen.
VIDEO
You
can
also record programmes received
by
the TV
on
video
(MONO)
L
ANT IN
75Ω
1
OUTIN(AV2)
models, signal type RGB input is optional function.
i.e. the signals red, green and blue can only be
RGB,
Signal type
selected for the Euro scart socket. These signals are transmitted,
for example, by a computer, pay TV decorder, game machine or
photo CD unit, etc.
Note
:
AUDIO
R
tape.
In
some
VCR
Audio/Video in/out sockets
VIDEO
(MONO)
L
AV1
ANT IN
75Ω
AUDIO
(L)AUDIO(R)
VIDEO
R
OUTIN(AV2)
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
2.
If the VCR is connected to the AV sockets on the back, press
the TV/AVbutton to select AV-2,AV-3 orAV-1 (phono jack).
You should select AV-3 or AV-2if AV3 or AV2sockets on the
front
3.
panel
are
VCR
connected to the VCR.
Press the PLAYbutton
on
POWER
the VCR.
N3
STANDBY
SINPUT
VID O (MON )(L)AV
O(R)
PR
The VCR
You
can
playback picture appears
on
the
screen.
also record programmes received
out sockets.
tape via audio/video
by
the TV
on
video
VCR
23
Connection of external
equipment
S-video/Audio in sockets
(S-AV)
POWER
IN3
STAND-BY
PR
SI
UT
VIDEO (MON
)L)AV
OR)
When
connecting
picture quality will
1.
2.
S-VIDEO VCR to the S-VIDEO socket, the
improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
on
VCR
an
be further
the control
panel
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets
on
the control
panel
by pressing the
3.
Select S-AV
4.
Press the PLAY button
The VCR
on
of the set.
TV/AV button
repeatedly.
the VCR.
playback picture appears
on
the
screen.
: If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket on the control panel of the set.
Note
Woofer socket
(option)
In some models you must connect the woofer connector on the
back to the WOOFER socket on the back of the set to hear the
woofer sound.
1.
OUT
ANT IN
75Ω
Connect the woofer connector
socket
IN(AV2)
VIDEO
on
on
the back to the WOOFER
the back of the set.
L
AUDO
R
WOOFER
2.
Adjust
section.
24
the woofer sound. Refer to the 'Sound
adjustment'
Troubleshooting
check list
Contents
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
25
Download PDF

advertising