LG | GF-29V10K | LG GF-29V10KN Owner’s Manual

Video CD Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
Model number
:
Serial number
:
P/NO : 3828VA0036B
(MD66A,
229W TX,
and
require
quote this
service.
3840VA0012B/C)
Contents
Installation
3
Location and function of controls
Remote control handset /
4
installation
Battery
panel
Basic operation
On and off / Programme selection
Volume adjustment / Mute function
On screen language selection
Front
On
7
8
screen menus
Menu selection
up TV stations
Auto programme tuning / Manual programme
Fine tuning / Programme edit
9
Setting
tuning
Picture
adjustment
adjustment / Noise reduction
Sound adjustment
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
13
Other functions
16
Picture
TV and AV modes /
Child lock / Auto
Output
sleep
14
source
Off timer / On timer
Calling
a
Basic VCD
programme table
(Video Compact Disc) operation
19
Disc type / Disc playback / VCD ver 2.0 playback
Re-play / Current CD mode / Selecting a track
Searching a particular point rapidly
Pause playback / Slow playback
Advanced VCD operation
Random playback / Digest playback / Repeat playback
Time search / PBC (Play Back Control)
KARAOKE operation (option)
22
24
KARAOKE function
Key
Disc
control / Voice cancel
care
and maintenance
Unloading the disc
Loading the disc on the disc compartment
When the disc is warped / Cleaning the disc
Notice / Storing the disc
Teletext (option)
26
27
Switch on/off
LIST mode / TOP mode / FASTEXT mode
Special
teletext functions
Connection of external
equipment
29
Aerial socket / Audio/Video in/out sockets
S-video/Audio in sockets
Euro scart socket
Troubleshooting
2
(S-AV)
(option)
check list
30
Installation
Contents
Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC power to
the set. In the event of thunderstorms
the aerial and mains
or
powercuts, please pull
out
plugs.
Warning
To prevent fire
moisture.
shock hazard, do not expose the set to rain
or
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked
cover.
For the best
reception
an
+75§Uon
the bac
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary vibration, moisture, dust or heat. Also ensure thatthe
placed in a position to allow a free flow of air. Do not cover
set is
the ventilation
openings
on
the back
cover.
3
Location and function of controls
Contents
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
Before you use the remote control handset,
batteries. See the next page.
1
POWER
1.
MUTE
2
TV/AV
2.
123
TEXT
3.
456
3
MENU
789
4.
PR
0
VOL
OK
C
MUTE
switches the sound
DUALPR.LIST
5
A-BRANDOMDIGEST
T
6
V PAUSE TIME-SCH
C
D
PBC
RE-PLAY X
T
M
REW
FF
KEY
SLO W
VOICECANCEL
7
KARAOKE
standby.
off.
standby
or
directly
select
a
number.
Memory)
picture setting.
Compact Disc)
(Open/close)
4
off to
or
install the
SSM (Sound Status Memory)
recalls your preferred sound setting.
opens
REPEAT
standby
6.VCD (Video
PR
SSM
on or
NUMBER BUTTONS
switch the set on from
D
PSM
from
on
5.PSM (Picture Status
recalls your preferred
VOL
V
6
POWER
switches the set
please
closes
or
a
BUTTONS
compact disc tray.
(Play)
plays a compact disc.
(Stop)
stops playing a compact disc.
(Previous selection)
selects a previous track.
selects a previous digest page.
selects a previous menu page in
(Next selection)
selects
selects
selects
the PBC mode.
a
next track.
a
next
a
next menu page in the PBC mode.
digest page.
(Previous menu)
selects a previous
REPEAT
repeats the
menu
current
in
playing
PBC(Play
track
or
Back
Control)
all tracks
on
mode.
the disc.
A-B
locates the points on a track or a disc you want to repeat them.
RANDOM
plays the track regardless of the disc's track number.
DIGEST
switches on the digest mode.
PAUSE
momentarily stops playback.
TIME-SCH
switches on or off the time search mode.
PBC (Play Back Control)
switches on or off the PBC mode in VCD
RE-PLAY
re-plays
4
a
disc at the
stopped point.
ver
2.0.
Location and function of controls
REW(
)
plays a disc in reverse rapidly.
FF(
)
plays a disc rapidly.
SLOW -/+
plays a slow
picture.
7.KARAOKE BUTTONS (option)
KEY -/+
adjusts the key when you sing.
VOICE CANCEL
attenuates the vocal sound with stereo from the disc for you to
sing a song easily.
8. TV/AV
selects TV or AV mode.
clears the menu from the screen.
POWER
MUTE
11.
TEXT
9
MENU
10
VOL
11
789
PR
0
a menu.
VOL
¡a/¡a(Programme Up/Down)
switches the set on from standby.
selects
8
456
9.TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
10. MENU
selects
TV/AV
123
a
programme
or a menu
OK
V
item.
¢¸/¢º(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
C
PR
D
9
OK
accepts your selection
or
displays
12.DUAL
selects the language during dual language broadcast.
selects mono sound during stereo broadcast.
13.PR.LIST
displays
Note
:
the programme table.
In teletext mode, the
(Stop),
(Previous selection),
(Previous menu), REPEAT, A-B,
RANDOM, DIGEST, PAUSE, TIME-SCH, PBC and RE-PLAY
are
Battery
PSM
SSM
REPEAT
13
DUALPR.LIST
A-BRANDOMDIGEST
T
V PAUSE TIME-SCH
C
(Next selection),
buttons
12
the current mode.
D
PBC
RE-PLAY X
T
9
M
REW
FF
KEY
SLO W
VOICECANCEL
KARAOKE
used for teletext function.
installation
The remote control handset is powered by two AA type batteries.
Gently pull down the cover of the remote control handset until the
battery compartment is exposed. Install two batteries as indicated
by the polarity symbols(§]and §^) marked inside the compartment.
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
3
1
4
5
6
12
7891011
OK
MENU
TV/AV
(MONO)
L
PBC
KEY
SLOW
A-B
REPEAT
MIC
MIC VOL
1
OPEN/CLOSE
PLAY
POWER
RE-PLAY
STOP
PR
2
1.
2.
2
off.
SLOW -/+
plays
slow
picture.
adjusts
the
key
a
compact disc tray.
when you
sing.
4. STANDBY INDICATOR
standby
mode.
points
on a
track
or a
disc you
repeat them.
REPEAT
want to
repeats the
current
playing
switches the set
track
or
all tracks
the disc.
re-plays a disc at the stopped point.
STOP(
)
stops playing a compact disc.
PLAY(
)
plays a compact disc.
Two PLAY buttons
6. REMOTE CONTROL SENSOR
7. PROGRAMME UP/DOWN
RE-PLAY
the front
a
adjusts
adjusts
the volume.
menu
standby.
or a menu
item.
settings.
9. OK
accepts your selection
displays
or
the current
mode.
10. MENU
selects
11. TV/AV
)
momentarily stops playback.
from
programme
8. VOLUME UP/DOWN
have same function. You can use either.
PREVIOUS SELECTION (
)
selects a previous track.
selects a previous digest page.
selects a previous menu page in the PBC
mode.
NEXT SELECTION (
)
selects a next track.
selects a next digest page.
selects a next menu page in the PBC mode.
on
on
selects
panel
:
PAUSE (
6
opens or closes
3. KEY -/+
5. COMPACT DISC TRAY
locates the
Note
14
illuminates in red when the set is in
A-B
on
13
2
OPEN/CLOSE
on or
VCD (Video Compact Disc) BUTTONS
PBC (Play Back Control)
switches on or off the PBC mode in VCD ver 2.0.
a
1
MIN MAX MIN MAX
VOL
2
MAIN POWER
switches the set
R
PAUSE
PLAY
AV3
AUDIO VIDEO
2
a menu.
selects TV
clears the
or
AV mode.
menu
from the
screen.
12. AUDIO/VIDEO IN SOCKETS
(AV3)
Connect the audio/video out sockets of
external
equipment
to these sockets.
13. MICROPHONE VOLUME CONTROL
adjusts
a
microphone
volume.
14. MICROPHONE SOCKETS
Insert
a
microphone
to these sockets.
Basic
operation
Contents
On and off
1.Press the main power button
on
the front
panel
to switch the set
on.
2.
If the set is in
standby mode, press
NUMBER buttons
on
the POWER,
¡a/¡aor
the remote control handset to switch it
on
fully.
3.
Press the POWERbutton
The set reverts to
on
standby
4.Press the main power button
Note
the remote control handset.
mode.
again
POWER
to switch the set off.
MUTE
set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug
is
TV/AV
If, while the
:
replaced in
the mains power socket.
123
456
MENU
789
Programme
selection
You
a
can
select
programme number with the
¡a/¡a
or
NUMBER
buttons.
PR
0
VOL
OK
VOL
PR
Volume
Press
adjustment
the¢¸/¢º
button to
adjust
the volume.
SSM
Mute function
Press the MUTEbutton. The sound is switched off and the
appears. You
can
cancel it
by pressing
the MUTE,
DUAL
display
¢¸/¢º, SSM,
orDUALbutton.
On
The
screen
language
menu can
French, Russian
1.
be
selection
displayed
or
on
the
screen
Chinese. First select your
Repeatedly press
in English, German,
language.
the MENUbutton to select the
Special
menu.
2.Press
the¡a/¡a button
3.Press the
All the
¢¸/¢º
to select
Language.
button to select the desired
language.
displays will appear in the selected language.
TV/AVor MENUbutton to return to normal TV
on screen
4.Press the OK,
viewing.
7
On
screen menus
The
an
also
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
Contents
menu.
displayed.
Menu selection
1.
2.
MENU
the MENUbutton to display each menu.
Press the ¡a/¡a button to select a menu item.
The selected menu item changes from green to purple.
3.Press the ¢¸/¢º button to change the setting of a menu item or
OKbutton to display the sub menu.
Note :
a. The menus automatically disappear in about 10 seconds if you
do not press a button.
b. In the AV and CD modes, the Station menu is not displayed.
c. In the teletext mode, MENUs are not displayed.
d. The display Tint in the Picture menu and Echo in the Sound
menu may appear in cyan and not be selected with the ¡a/¡a
button. The tint functions in NTSC only and Echo when a
microphone is inserted in a microphone socket on the front panel.
Repeatedly press
PR
Station
VOL
OK
AutoOprogramme
VOL
AutoOprogramme
StorageOfromOOOOOO01O
ManualOprogramme
PR
SystemOOOOOOOOOOAUTO
ProgrammeOedit
Start
()O}{OOKOMENUOTV
()OOKOMENUOTV
AVO0~9
AV
Station
menu
ManualOprogramme
SystemOOOOOOOOOOOOBG
Picture
ChannelOOOOOV
'Contrast
'Brightness
・Colour
OO≥Sharpness
?Tint
100
50
50
50
00
Off
OOYNR
UHFO01
SearchOOOOOOOOOOO{{{
FineOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOCHO01
StorageOOOOOOOOOOO01O
()O}{OOKOMENUOTV
AV
μμμμμμμμμμμμμμμμμμ
()O}{OOKOMENUOTV
AV
ProgrammeOedit
{00O_____OOOO05OCCO01
Picture
menu
01OCHO01OOOO06OCCO02
02OCHO02OOOO07O_____
03OCHO03OOOO08O_____
Sound
04OCHO30OOOO09O_____
50
50
Treble
Bass
¢ Balance
OO
Echo
º
Surround
OOUBB
∞¶
? Delete
?OCopy
00
? Move
?OSkip
50
()O}{OOKOMENUOTV
Off
Off
μμμμμμμμμμμμμμμμμ
()O}{OOKOMENUOTV
Sound
AV
menu
PictureOstore
FavoriteO1O
FavoriteO2
Special
Language
Input
Output
English
()OOKOMENUOTV
AV
TV
Monitor
OOChildOlock
Off
Off
AutoOsleep
OffOtimerOOOO__:__
OnOOtimerOOOO__:__
()O}{OOKOMENUOTV
AV
SoundOstore
FavoriteO1O
Special
menu
TV programme
8
FavoriteO2
()OOKOMENUOTV
AV
AV
Setting up
Up
TV stations
Contents
to 100 TV stations can be stored in this set
numbers
able to
use
by programme
have preset the stations, you will be
NUMBER buttons to scan the stations you
99). Once you
to
(0
the
¡a/¡a
or
programmed.
Stations
can
Station
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
be tuned
using
automatic
or
manual modes.
()OOKOMENUOTV
Auto programme
All stations that
can
recommended that you
1.
Repeatedly press
2.
Press the
3.
AV
tuning
be received
use
are
stored
auto programme
by this method. It is
during installation of this set.
the MENU button to select the Stationmenu.
¡a/¡a button to select Auto programme.
Press the OKbutton to display the Auto programmemode.
TV/AV
123
456
AutoOprogramme
MENU
StorageOfromOOOOOO01O
SystemOOOOOOOOOOAUTO
789
Start
PR
0
()O}{OOKOMENUOTV
AVO0~9
VOL
4.
Press the
¡a/¡a
button to select
beginning programme
NUMBER buttons. Any
5.
Storage from. Select
¢¸/¢º button
number with the
the
OK
VOL
PR
or
number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the ¡a/¡a button to select System.Select a TV system
¢¸/¢º button; AUTO, M, BG, I or DK.
¡a/¡a button to select Start.
the OKbutton to begin auto programming.
with the
6.
7.
Press the
Press
The stored programme number and station
name
appear
on
the
screen.
AutoOprogramme
StorageOfromOOOOOO01O
SystemOOOOOOOOOOAUTO
PR.O03OOOOCHO05OO{{{
OKOTV
The channel number is
To stop auto
When auto
AV
assigned
and stored with CHor CC.
programming, press
programming
is
the OKor TV/AVbutton.
completed,
the
Programme
edit
mode appears on the screen with the station name or the
channel number. See the 'Programme edit' section to edit the
stored programme.
8.
Press the TV/AVbutton to return to normal TV
viewing.
9. To store another TV system repeat above steps. If all systems
BG, I, DK) are receivable, these systems can be stored.
(M,
9
TV stations
Setting up
Station
Manual programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a
station
()OOKOMENUOTV
tuning
with five characters to each programme number.
name
AV
the MENU button to select the Stationmenu.
1.Repeatedly press
2.Press the
¡a/¡a button
to select Manual programme.
display the Manual programme
3.Press the OKbutton to
mode.
ManualOprogramme
SystemOOOOOOOOOOOOBG
ChannelOOOOOV
UHFO01
SearchOOOOOOOOOOO{{{
FineOOOOOOOOOOOOO{{{
123
NameOOOOOOOOOOOCHO01
StorageOOOOOOOOOOO01O
456
()O}{OOKOMENUOTV
MENU
AV
789
¡a/¡a button to select System.Select a TV system
¢¸/¢º button; BG, I, DKor M.
5.Press the ¡a/¡a button to select Channel. Press the ¢¸/¢º
button to select V/UHFor CATVas required.
If possible, select the channel number directly with the
4.Press the
PR
0
with the
VOL
OK
PR
VOL
NUMBER buttons.
6.Press the
button to
will
button to select Search. Press the
¡a/¡a
commence
If
searching.
a
¢¸/¢º
station is found the search
stop.
7.If this station is the
¢¸/¢º
required, press the ¡a/¡a button to
the desired programme number with the
NUMBER buttons. Any number under 10 is
one
Storage. Select
select
button
or
numeric '0' in front of it, i.e. '05' for 5.
display Stored will appear.
9.To store another station repeat steps 4 to 8.
entered with
a
8.Press theOKbutton to store it. The
Assigning
a
1.Press the
2.Select
station
¡a/¡a
name
button to select Name.
first character
a
position
with the ¢¸ button. To select
use the
your desired character, press the ¡a button. You can
and the numeric 0to 9.
alphabet Ato Z, a blank, ., +,
_
With the
¡a
button you
3.Select the next
can
select in the
position by pressing
the
opposite
¡a
direction.
button and then take
your choice of the second character, and so on.
4.Press the OKbutton to select Storage. Select the desired
programme number with the ¢¸/¢º button
5.Press theOKbutton to store it.
6.To
10
assign
another station
name
or
NUMBER buttons.
repeat steps 1
to 5.
TV stations
Setting up
Fine
tuning
Normally
fine
Station
Station
tuning
is
only necessary
if
reception
menu
is poor.
AutoOprogramme
ManualOprogramme
1.Repeat
'Manual programme
tuning' steps
ProgrammeOedit
1 to 3.
()OOKOMENUOTV
ManualOprogramme
AV
SystemOOOOOOOOOOOOBG
ChannelOOOOOV
UHFO01
SearchOOOOOOOOOOO{{{
FineOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOCHO01
StorageOOOOOOOOOOO01O
()O}{OOKOMENUOTV
2.Press the
¡a/¡a
button to select Fine. Press the
fine tune for the best
3.Press the
¡a/¡a
AV
picture
¢¸/¢º
button to
button to select
Storage. Select
the desired
programme number with the ¢¸/¢º button or NUMBER buttons.
4.Press theOKbutton to store the new setting.
5.Press the TV/AVbutton to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
TV/AV
123
and sound.
viewing.
by yellow
456
MENU
789
PR
0
number
VOL
OK
VOL
PR
11
Setting up
Station
Programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
()OOKOMENUOTV
AV
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy to the next programme numbers.
1.
Repeatedly press
2.
Press the
the MENU button to select the Stationmenu.
¡a/¡a button
to select
3.Press the OKbutton to
display
Programme edit.
Programme editmode.
the
ProgrammeOedit
{00O_____OOOO05OCCO01
01OCHO01OOOO06OCCO02
02OCHO02OOOO07O_____
03OCHO03OOOO08O_____
04OCHO30OOOO09O_____
TV/AV
123
? Delete
?OCopy
? Move
?OSkip
()O}{OOKOMENUOTV
AV
456
MENU
789
PR
0
VOL
OK
PR
VOL
Deleting
a programme
1.Select a programme to be deleted with the ¡a/¡a or ¢¸/¢º
button.
2.Press the RED button.
The selected programme is deleted and all the following programmes are shifted forward one position.
Copying
a programme
1.Select a programme to be copied with the ¡a/¡a or ¢¸/¢º button.
2.Press the GREEN button.
All the following programmes are shifted forward one position to
the next highest programme number.
Moving
a programme
1.Select a programme to be moved with the ¡a/¡a or ¢¸/¢º
button.
2.Press the YELLOW button. The selected programme is in yellow.
3.Move the programme to the desired programme number with
the
¡a/¡a
button.
The selected programme
the direction selected.
4.Press the YELLOW button
moves
again
through
the programme list in
to release this function.
Skipping
a programme
1.Select a programme to be skipped with the
button.
2.Press the BLUE button.
The skipped programme turns to blue.
¡a/¡a
or
¢¸/¢º
3.Press the BLUE button
again to release the skipped programme.
The programme returns to green and the skip is cancelled.
With the ¡a/¡a button the skipped programme can not be found.
If you want to find the skipped programme directly enter the
programme number with the NUMBER buttons or select it in the
programme edit or table mode.
Press theTV/AVbutton to return to normal TV
12
viewing.
Picture
adjustment
Picture
adjustment
You
adjust picture contrast, brightness, colour intensity,
can
sharpness
and tint
Contents
Picture
Picture
(NTSC
AV
only)
to the levels you
prefer.
'Contrast
'Brightness
・Colour
OO≥Sharpness
?Tint
00
Off
OOYNR
1.
Repeatedly
2.
Press the
¡a/¡a
button to select the desired
3.
Press the
¢¸/¢º
button to make
At this
setting
4.
press the MENUbutton to select the Picturemenu.
picture
display
μμμμμμμμμμμμμμμμμμ
()O}{OOKOMENUOTV
AV
appropriate adjustments.
point you can complete your adjustments
for immediate recall by following steps 4 to 6.
Press the OKbutton to
item.
menu
100
50
50
50
or
store your
the Picture store mode.
PictureOstore
MENU
FavoriteO1O
FavoriteO2
()OOKOMENUOTV
5. Select Favorite 1
The Favorite1or
PR
Favorite 2with the
Favorite2options
¡a/¡a button.
VOL
allow you to programme
OK
VOL
PR
picture settings for various lighting
conditions such as day and night.
Press the OKbutton. The display Storedwill appear.
two
6.
or
AV
To recall your
desired picture
The
different
entirely
preferred setting, press the PSMbutton until the
(Standard, Favorite1or Favorite2) appears.
Standardpicture
tion at the
factory
is
programmed
and cannot be
for
PSM
good picture reproduc-
changed.
Noise reduction
This function reduces
picture
noise
during viewing.
1.
Repeatedly press
2.
Press the
¡a/¡a
button to select YNR.
3.
Press the
¢¸/¢º
button to select On
4.
Repeat steps
the MENUbutton to select the Picturemenu.
or
Off.
4 to 6 above.
13
Sound
Sound
menu
Sound
Sound
50
50
Treble
Bass
¢ Balance
OO
Echo
º
Surround
OOUBB
∞¶
00
50
Off
Off
μμμμμμμμμμμμμμμμμ
()O}{OOKOMENUOTV
You
can
adjustment
Contents
adjustment
adjust
the sound treble, bass, balance, surround, echo
as you prefer. The surround sound
volume and UBB to the levels
creates an all around sound as in a concert hall and
Bass
AV
stresses and
Booster)
Press the
¡a/¡a
3.
Press the
¢¸/¢º
At this
setting
4.
UBB(Ultra
sound.
the MENUbutton to select the Soundmenu.
1.Repeatedly press
2.
emphasizes heavy
button to select the desired sound item.
button to make desired
adjustment.
point you can complete your adjustments
for immediate recall by following steps 4 to 6.
Press the OKbutton to
display
or
store your
the Sound store mode.
MENU
SoundOstore
PR
FavoriteO1O
FavoriteO2
VOL
OK
PR
VOL
()OOKOMENUOTV
5. Select Favorite 1
6.
DUA L
Favorite 2with the
Press the OKbutton. The
To recall your
desired sound
SSM
or
factory
Stereo/Dual
display
¡a/¡a
button.
Storedwill appear.
preferred setting, press the SSMbutton until the
(Standard, Favorite1or Favorite2) appears.
The Standardsound is
at the
AV
programmed
and cannot be
for
good
sound
reproduction
changed.
reception
When
a programme is selected, the sound information for the
station appears with the programme number and station name.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing theDUAL button. In mono reception the depth
of sound is improved. To switch back to stereo, press the DUAL
button again.
mono
Note
:
If the
mono
signal
button to switch between
of forced
14
mono
is distorted
mono
sound MONO is
or
noisy press
and forced
displayed
on
the
the DUAL
sounds. In
mono
screen.
case
Sound
Language selection
for dual
language broadcast
If a programme received in two languages
switch to DUAL I, DUAL II or DUAL I II by
repeatedly.
DUAL I sends the
DUAL II sends the
DUAL I II sends
NICAM
adjustment
(dual language), you can
pressing the DUAL button
primary broadcast language to the loudspeakers.
secondary broadcast language to the loudspeakers.
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the DUAL button repeatedly.
1. When NICAM
MONO
or
mono
is received, you
can
select NICAM
FM MONO.
2. When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM
mono.
3. When NICAM dual is received, you can select DUAL I, DUAL
II or DUAL I II or MONO. When FM mono is selected the
display
MONO appears
on
the
screen.
DUAL
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loudspeakers.
Repeatedly press
L+R
:
the DUAL button to select the sound output.
signal from audio L input is sent to left loudspeaker
signal from audio R input is sent to right loudspeaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right loudspeakers.
Audio
and audio
L+L
R+R
:
:
15
Other functions
Special
TV and AV modes
Special
menu
Language
Input
Output
Contents
English
TV
Monitor
Off
Off
AutoOsleep
OffOtimerOOOO__:__
OnOOtimerOOOO__:__
OOChildOlock
()O}{OOKOMENUOTV
AV
Inputs
can
be set for TV
video cassette recorder
or
AV mode. AV mode is used when
(VCR),
or
other
equipment
a
is connected to
the set.
Note
:
When
a
VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external
equipment'
section.
1.Repeatedly press
2.Press the
3.Press the
TV/AV
123
456
MENU
The four AV modes
PR
VOL
OK
PR
VOL
Specialmenu.
Input.
select TV,AV1,AV2 ,AV3 orS-AV.
to select
to
are :
AV 1
:
VCR connected to the AV1sockets
on
the back
AV 2
:
on
the back
AV 3
:
VCR connected to the AV2sockets
VCR connected to the AV3sockets
S-AV
789
0
the MENUbutton to select the
¡a/¡a button
¢¸/¢º button
:
the front panel
VCR connected to the AV2 AUDIOand S-VIDEOsockets
on the back
on
4.Press the OK, MENUor TV/AVbutton.
To return to TV mode from AV mode press the
buttons.
Alternatively you
can
select the TV
or
¡a/¡a
AV mode
or
NUMBER
by pressing
the
TV/AVbutton.
Output
source
This function lets you select an output source; TV
through the audio/video out sockets on the TV.
1.Repeatedly press
2.Press the
the MENUbutton to select the
¡a/¡a button
¢¸/¢º button
3.Press the
to select
or
Monitor
Specialmenu.
Output.
to select TV or Monitor.
4.Press the OK, MENUor TV/AVbutton.
Child lock
The TV
be set
can
so
that the remote control handset is needed to
control it.
This feature
can
be used to prevent unauthorised
1.Repeatedly press
2.Press the
3.Press the
viewing.
the MENUbutton to select the
¡a/¡a button
¢¸/¢ºbutton
Specialmenu.
to select Child lock.
on
the remote control handset to select
On.
4.Press the OK, MENUor TV/AVbutton to return to normal TV
viewing.
With the lock on, the display Child lock appears on the screen if
any button on the front panel is pressed while viewing the TV.
16
Other functions
Auto
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
1.Repeatedly press
2.Press the
3.Press the
Special
Special
¡a/¡a
¢¸/¢º
the MENUbutton to select the
button to select Auto
button
on
Specialmenu.
Language
Input
Output
menu
English
TV
Monitor
OOChildOlock
Off
Off
AutoOsleep
OffOtimerOOOO__:__
OnOOtimerOOOO__:__
()O}{OOKOMENUOTV
AV
sleep.
the remote control handset to select
On.
4.Press the OK, MENUor TV/AVbutton to return to normal TV
viewing.
TV/AV
Off timer
The off timer
preset time
automatically
elapses.
1.Repeatedly press
2.Press the
¡a/¡a
switches the set to
after the
standby
MENU
the MENUbutton to select the
Specialmenu.
button to select Off timer.
PR
3.Set the desired time period with the ¢¸/¢º button.
4.Press the OK, MENUor TV/AVbutton to return to normal TV
viewing.
VOL
OK
VOL
PR
On timer
The set
automatically
1.Repeatedly press
2.Press the
¡a/¡a
switches
on
after the preset time
the MENUbutton to select the
elapses.
Specialmenu.
button to select On timer.
3.Set the desired time period with the ¢¸/¢º button.
4.Press the OK, MENUor TV/AVbutton to return to normal TV
viewing.
You
can
set the on/off timer from 10 minutes up to 12 hours 50
begins to count down from
minutes in 10 minutes steps. The timer
the selected time period.
Note
a.
:
If the
same
time is set for the
time and off time,
on
only
the
time operates.
This set must be put into standby mode with the POWER button
previously set
b.
on
c.
the remote control to operate the
Two hours after the set is switched
will
switch back to
on
timer function.
by
standby
automatically
pressed.
view the remaining on/off time,
on
the
on
timer function it
mode unless
a
button
has been
d.
To
e.
To cancel the set on/off time, set the on/off timer to --:--.
When you switch the main power off of the set, the set releases
f.
select the
Special
menu.
the preset on/off time.
17
Other functions
Calling
You
programme table
a
can
displaying
check the programmes stored in the memory
the programme table.
Displaying programme
by
table
Press the PR.LISTbutton.
The programme table appears on the screen. One programme
table contains ten programmes as below.
ProgrammeOtable
TV/AV
{00O_____OOOO05OCCO01
01OCHO01OOOO06OCCO02
02OCHO02OOOO07O_____
03OCHO03OOOO08O_____
04OCHO30OOOO09O_____
123
456
()O}{OOKOMENUOTV
AV
789
PR
0
VOL
OK
Note
VOL
a.
:
You may find
auto
b.
PR
blue programmes. They are skipped
and in the Programme edit mode.
some
programming
Some programmes with the channel number shown in the
programme table indicate there is
Selecting
a
no
station
name
assigned.
programme in the programme table
Select upper
PR.LIST
during
or
lower programme with the
right programme
with the
¢¸/¢º
¡a/¡a
button and left
or
button. The colour of normal
programmes is green, skipped programme is blue and the chosen
programme in green is indicated as {.
Then press the OKbutton.
The set switches to the chosen programme number.
Paging through
There
are
a
programme table
ten programme table pages in which contain 100
programmes.
Pressing
the
¡a/¡a
or
¢¸/¢º
button
repeatedly
turns
the pages.
Switching
back to TV mode
Press the TV/AVor NUMBER buttons
mode.
18
during programme
table
Basic VCD
(Video Compact Disc) operation
Contents
In addition to a TV function, the Video-CD TV functions as a Hi-Fi
audio amplifier, VCR in playing a movie or KARAOKE machine
depending on the type of compact disc.
Disc
type
There
are
various types of the disc
CD-DA
as
shown below.
Disc Digital Audio)
the digital sound only.
CD-DA on the screen.
(Compact
Compact disc with
It is shown
as
CD-G
(Compact Disc Graphics)
Compact disc with the digital sound
It is shown
as
CD-G
on
the
and
graphics.
screen.
V-CD (Video Compact Disc) ver 1.1
Compact disc with the digital sound and
It is shown as V-CD on the screen.
123
digital image (Full motion).
V-CD (Video Compact Disc) ver 2.0
unlike V-CD 1.1, has a menu itself, therefore
are set up via menus.
It is shown as PBC V-CD on the screen.
456
789
recording
contents
PR
0
VOL
Disc
1.
2.
playback
disc tray with the
(Open/close)button.
Place your selected compact disc in the tray with the printed
side facing up.
3. Press the
(Play) button.
The disc tray is automatically closed, the disc information is
detected and then playback will start.
Open
OK
VOL
V
a
C
PR
D
Or close the disc tray by pressing the
(Open/close) button or
the tray slightly. The disc information will automatically
be detected and the stop mode appears. Then press the
(Play) button to start playback.
sliding
To stop
playback, press
the
(Stop)button.
Note : If, while the disc is open, the set is switched off and then on,
the disc tray is automatically inserted.
V-CD
ver
2.0
playback
Unlike other discs, the V-CD ver 2.0 has menus itself, the
recording contents of V-CD ver 2.0 are set up via menus.
1.
Repeat steps 1 to 3 above.
The display PBC V-CDthen menu mode appears on the screen.
2. Select the desired menu with the NUMBER button. If the
selected menu displays sub menus, you can use the NUMBER
button until the desired track starts playback.
To return to the
during playback
previous
menu, press the
or
button
mode.
When a menu has pages;
When a menu has next page, the display
appears.
To display the next menu page, press the
button.
When a menu has previous menu page, the display
appears.
To display the previous menu page, press the
button.
19
Basic VCD
(Video Compact Disc) operation
Re-play
If you press the
(Play) button in the stop mode, the compact disc
starting point of first track then play from the
will return to the
beginning.
But if you press the RE-PLAY button instead of the
button, the disc will play at the stopped point.
Note
:
This function can't work in the CD-G disc
or
(Play)
PBC ON mode.
Current CD mode
123
It's convenient to notice the current
operation
mode.
456
Press the OK button
789
The output sound, current track, running time within the current
playing track, type of disc, current operation mode and total
running
0
time appear
during playback.
on
OK
the
screen.
OL+ROOOOOOOOOOOOOOOOCD_G
O¡02TMOO00:00O¢"
V
OTotalO32:40
C
D
Press the OK button
again or wait for a second.
disappears on the screen.
The current CD mode
Note: In the current mode of V-CD
V
C
RE-PLAY
current
operation
ver
mode and type of disc
2.0, only the output sound,
are
displayed.
D
Selecting
a
track
Selecting the desired track directly
By using the track number on the disc,
select the desired track with
the NUMBER button.
For
example,
12,
press 1 and 2. The
Note
:
while
playing the track No. 3, to select the track
playback starts from the track No. 12.
In the PBC ON mode, it's not
NUMBER buttons
Selecting
a
track
during playback
by
one
Use to select the next
or
possible
or
No.
to select a track with
stop mode.
track
previous
track from the current
playing
track.
Press the
previous
(Previous selection) button twice
to select the
track.
If you press the button only once, the disc returns to the
of the current track.
starting
point
Press the
20
(Next selection) button
once
to select the next track.
Basic VCD
Searching
a
(Video Compact Disc) operation
particular point rapidly
Forward search
Press the FF button in the
The disc rotates
(Play)
mode.
rapidly.
To return to normal
or
playback
speed
in the desired
position, press
the
position, press
the
FF button.
Rewind search
Press the REW button in the
The disc rotates in
reverse
To return to normal
(Play)
Pause
or
playback
rapidly.
speed
mode.
in the desired
REW button.
playback
Press the PAUSE button to
Still video
momentarily stop playback.
playback appears on the screen and audio playback
V
C
stops.
D
To return to normal
Slow
speed, press
the PAUSE
or
(Play)
button.
playback
Press the SLOW -/+ button
Slow video
during playback.
playback appears on the screen
and audio
playback
stops.
V PAUSE
C
D REW
To return to normal
Note
:
speed, press
the
(Play)
FF
SLOW
button.
The slow playback can't work with CD-DA and CD-G discs.
21
Advanced VCD
Random
The set
operation
Contents
playback
plays
the track
regardless
of the disc's track number.
Press the RANDOMbutton.
The display Randomappears on the
next tracks are selected at random.
screen
and from this
point
To play back the normal track sequence on the disc, press the
RANDOMbutton again.
The display Randomdisappears and playback will start from the
current playing track.
Note
123
456
789
:
This function can't work in the PBC ON mode.
Digest playback
This function displays the first scenes of each track up to 9 on a
screen in the stop mode. In the playback mode, the first scenes
divided a current track by 9 are shown on a screen.
In case being more than nine tracks, the display
will appear on
the right lower screen. If the
(Next selection)button is pressed
at this time, the next digest page appears on the screen. To return
to the previous digest page, press the
(Previous selection)
button.
0
Press the DIGESTbutton to display the digest mode.
Input your favourite scene among nine scenes using the
corresponding number button (1 to 9). Also use the corresponding
number button (1 to 9) in the next digest page.
REPEAT
V
A-BRANDOMDIGEST
For example, if you want to view the third scene, press the number
button 3.
If you want to view the fourth scene in the next digest page, you
must not press the number button 1 3but the number 4.
C
D
The
playback
If you want to
will start at the
remove
Note : The Digest
CD ver 2.0 discs.
the
point.
digest mode, press
playback
the
(Stop)
button.
can't work with CD-DA, CD-G and V-
Repeat playback
You
repeat the current
this function.
can
using
playing
track
or
all tracks
on
the disc
by
Repeating one track
To repeat the current playing track, press the REPEATbutton until
1
the display
appears on the screen.
The current playing track will be played repeatedly.
Repeating all tracks
To repeat all tracks on the disc, press the REPEATbutton until the
display A appears on the screen.
After playing the entire tracks on a disc, the first track will start
playback.
To cancel the repeat function, press the REPEATbutton until the
1
A does not appear on the screen.
or
display
22
Advanced VCD
Repeating playback between particular points
can easily locate the points on a track or a
You
operation
disc you want to
repeat them.
1.
Press the A-B button at the
point you want to start playback.
appears on the screen.
Press the A-B button again at the point you want to stop
The
2.
display
A
The
playback.
AB
display
appears
To
play back the normal track sequence
(Play) or A-B button again.
Note
a.
on
on
the
screen.
the disc, press the
123
:
This function can't work with CD-G disc.
b. An interval pressed between start and stop
within three seconds.
456
points
should not be
789
0
Time search
Input any time within
playback will start from
1.
the disc's total
the
point
of the
recording
input time.
time and then
V
C
D
Press the TIME-SCH button.
The
2.
display --:-- appears on the screen.
Input time with the NUMBER button. The playback
from the point of the input time.
will start
A-B
Note
a.
:
If the shorter time than the
disc is
input,
the disc
starting point of the first track on the
will play from the starting point of the first
V
TIME-SCH
PBC
C
D
track.
b.
Confirm the
c.
input time. If
input, the
time is
recording
the
longer
time than the disc's total
time will not be recorded.
In the CD-G and PBC V-CD modes, the Time search function will
not
PBC
operate.
(Play
In V-CD
ver
Back
Control)
2.0, the PBC V-CD mode appears and you
the desired track via
menus.
During playing V-CD
ver
The PBC V-CD mode
can
select
2.0, press the PBC button.
disappears and the V-CD
playback will start in
to the V-CD ver 1.1. The
ver
2.0 will
change
order of the disc's
track number.
23
KARAOKE
operation (option)
Contents
KARAOKE function
The set is
equipped with the microphone
microphones simultaneously.
sockets for
using
two
microphone into a MIC 1or 2socket.
using the microphone, you can tune the echo, the sound
effect like rumbling of a mountain.
Adjust the echo volume. See the 'Sound adjustment' section.
To increase the microphone volume, turn the MIC volume
1.Insert the
2. When
3.
control clockwise and to decrease turn counterclockwise.
4.
Open
a
disc tray with the
(Open/close)button
and
place your
selected compact disc in the tray.
5. Press the
(Play)button.
6.
Sing
Key
song with
a
accompaniment using
a
MIC.
control
Press the KEY -/+button to
adjust
the
key
when you
sing.
V
C
D
Voice cancel
This function attenuates the vocal sound with stereo from the disc
for you to
sing
To switch
a
on or
song
easily.
off the voice cancel function press the VOICE
display Voice cancel OnorOffmode
CANCELbutton. The
appears.
Voice cancel may not work well in the following cases.
Monaural-recorded discs (The accompaniment is also
-
KEY
VOICECANCEL
-
KARAOKE
-
-
-
-
Only
few instruments
A duet is
are
playing
reduced).
in the stereo-recorded disc.
being played.
The disc has strong echoes or chorus.
The singer's voice on the disc deviates from the center.
Multiplex
Note
if the
24
a
discs.
: The Key control and Voice cancel functions
microphone is not inserted into a MIC socket.
do not operate
Disc
care
and maintenance
enjoy best picture and sound keep the disc in a clean
original case. A stain, scratch, dirt on the disc can cause
picture and sound. Never touch on the surface of disc.
To
Placing
the disc
on
the disc
Put the disc onto the circle surface
together
indicated in the disc.
a
disc
play.
When the disc is
warped
Place the disc in the
original case and insert
object with 4-5 kg weight
glasses
In a day
and
place
an
it between the flat
on
the flat
with this state, the warp is stretched.
Do not use the warped disc that cause the pick-up any
Cleaning
If
and
bad
compartment
Place the disc in the disc tray with the labels facing upward.
Note : Do not put more than one disc in the disc tray except
to
Contents
a
disc is
glasses.
damage.
the disc
dirty
or
lightly soiled,
a
soft cloth
disc. When the disc is very dirty, buy the
wipe the disc in a right manner. Never
cleaner for Record and anti-static
can
be used to
detergents
use
wipe
the
for CD and
benzene, thinner,
electricity.
Notice
In the
playback mode,
the disc rotates with
the disc which is
never use
repaired
high speed, therefore
deforming or
with any bend,
adhesives.
Do not attach paper
label side any letter
Storing
or
sticker
by using
on
ball
the disc and write down
point pen
or
on
the
pencil.
the disc
It is recommended that
during non-use periods, the disc should be
original case and in a vertical position. Vertical position
of the disc is important in order to avoid warpage. In fact, it is not
recommended that a warped or cracked disc be inserted into the
disc tray. Also never store or place the disc near a heat source or
in direct sunlight.
stored in its
25
Teletext
Teletext is
an
teletext system
(option)
Contents
optional function,
can
therefore
only
a
set with the
receive the teletext broadcast.
a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
Teletext is
The teletext decoder of this TV
can
support the LIST, TOP and
FASTEXT systems. LIST
pages which are selected
TV/AV
number. TOP and
(standard teletext) consists of a number of
by directly entering the corresponding page
FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXTbutton to switch to teletext. The initial page
PR
selected page appears on the screen.
Two page numbers, TV station name, date and time
are
last
displayed
headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXTor TV/AVbutton to switch off teletext. The previous
on
PR
the
or
screen
mode reappears.
LIST mode
T
X
T
M
If the TV is in TOP
or
FASTEXT mode, press the
4button
to
switch to LIST mode.
Page
1.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then reenter the correct page number. If the page is not available, the
page number, e.g. "> 300 <" will flash for a few seconds.
2. The
¡a/¡a button
following page.
26
can
be used to select the
preceding
or
Teletext
(option)
Programming a colour button
Four teletextpage numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Using
the NUMBER buttons, select the page you wish to
programme.
2. Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
3.
of the
screen
Press
a
can
change
to ">000?".
colour button to store the page number. From
select this page with the same coloured button.
you
4. The three other coloured buttons
are
programmed
in the
now
same
on,
way.
123
456
TOP mode
789
The
guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
user
and the blue field indicates the next block.
Group/block/page
0
PR
OK
selection
PR
1. With theBLUEbutton you can progress from block to block.
2. Use the YELLOWbutton to proceed to the next group with
automatic overflow to the next block.
3. With the GREENbutton you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
¡a
button
can
be used.
4.TheREDbutton
the
¡a button
can
permits
to return to
previous
selection.
Alternatively
be used.
T
X
T
Direct page selection
Corresponding to the LIST teletext mode, you can select a page by
entering it as a three digit number using the NUMBER buttons in
TOP mode. If the page is not available, the page number, e.g.
">300<" flashes for a few seconds.
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
1.
selection
Ebutton to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
Press the
2. You
3.
can
along
the
Corresponding to the LIST teletext mode, you can select a page
by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
4. The
¡a/¡a button
can
be used to select the
preceding
or
following page.
27
Teletext
Special
G
(option)
teletext functions
(REVEAL)
Press this button to
as
display concealed information,
or puzzles.
again to remove the information
Press this button
the
such
solutions of riddles
from
display.
EXPAND
6
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
page.
Press this button
D
again
to return to the normal
Displays
the TV
picture
on
the
screen
while
waiting
for
will appear at the
teletext page. The display
left
hand
corner
of
the
screen.
When
the updated
top
will
is
available
then
page
display
change to the
the
new
HOLD
updated
teletext page.
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
Stops
shown
usually,
T
X
T
display.
UPDATE
page number.
Press this button to view the
7
the
on
the
below the time. When this
screen
button is
pressed the stop symbol is displayed at the top
left-hand corner of the screen and the automatic page
change
is inhibited.
To continue press this button
F
MIX
Displays
picture.
the teletext pages
To switch the TV
H
again.
picture
superimposed
off press this button
on
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to remove the
display.
In
the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the
bottom of the
screen.
To hold
or
press the RED/GREEN, ¡a/¡a
Press again to exit this function.
28
the sub page,
NUMBER buttons.
change
or
Connection of external
You
connect additional
can
such
equipment,
as
equipment
Contents
VCRs, camcorders
etc. to your set.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
75Ω
(MONO)
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
AV1
AV2
S-VIDEO
R-AUDIO-L
VIDEO
OUTPUT
3.Store the VCR channel
desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is stored.
5.Press the PLAYbutton
VIDEO
on a
on
R-AUDIO-L
(MONO)
VCR
the VCR.
Audio/Video in/out sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets of
75Ω
(MONO)
the set.
AV1
AV2
S-VIDEO
R-AUDIO-L
VIDEO
OUTPUT
2.
If the VCR is connected to the AV1sockets, press the TV/AV
button to select AV1. You should select AV2 if AV2sockets
on
the back
sockets
3.
on
panel
are
the control
panel
Press the PLAYbutton
The VCR
connected to the VCR
on
are
or
AV3 if AV3
VIDEO
R-AUDIO-L
(MONO)
VCR
used.
the VCR.
playback picture appears
on
the
screen.
OK
MENU
TV/AV
(MONO)
L
MIC
MIC VOL
1
AV3
AUDIO VIDEO
2
R
PR
You
can
also record programmes received
out sockets.
by
the TV
on
VOL
MINMAX MINMAX
1
2
video
tape via audio/video
VCR
S-video/Audio in sockets
(S-AV)
connecting a S-VHS VCR to
picture quality will be further improved.
When
the S-VIDEOsocket, the
1.Connect the S-video socket of the VCR to the S-VIDEOsocket
on
the back
of the set.
panel
75Ω
(MONO)
AV1
2.Connect the audio cable from the S-VHS VCR to the AV2
AUDIO sockets
3.Select
4.
on
the back
S-AVby pressing
Press the PLAYbutton
The VCR
the TV/AVbutton
on
R-AUDIO-L
VIDEO
(MONO)
repeatedly.
the VCR.
on
AV2
R-AUDIO-L
VIDEO
of the set.
playback picture appears
Euro scart socket
1.
panel
S-VIDEO
OUTPUT
S-VHS VCR
the
screen.
(option)
Connect the Euro scart socket of the VCR to the Euro scart
75Ω
S-VIDEO
socket of the set.
AV2
R-AUDIO-L
VIDEO
(MONO)
the VCR.
2.
Press the PLAY button
3.
Press the TV/AV button to select AV1.
You
can
on
also record programmes received
by
the TV
on
video
VCR
tape.
29
Troubleshooting
check list
Contents
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
30
(VCR only)
Download PDF