LG | CT-29Q26EN | LG CT-29Q26EN Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0240A
(MC007A,
cover
require
026C/F/H/J/042E
TX)
and quote this
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
9
Setting up
Picture adjustment
Picture adjustment / Eye (option) / Picture format
Turbo picture selection (option)
14
Sound adjustment
Sound adjustment / Turbo sound selection
Stereo / Dual reception (option)
NICAM reception (option)
Sound output selection
16
Other functions
TV and AV modes / Auto AV switching
Child lock / Auto sleep / Blue back
Tilt (option) / Game (option)
Degaussing (option) / Sleep timer
18
(option)
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture (option)
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
21
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
22
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video / Audio in sockets (S-AV) (option)
Headphone socket (option)
25
Troubleshooting
2
(option)
check list
27
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
1
POWER
MUTE
2
10
3
TV/AV
ARC
I/II
PICTURE
5
T
U
R
B
O
11
12
EYE/
13
SOUND
Remote control handset
LIST
4
TEXT
MENU
Before you use the remote control
teries. See the next page.
1.
14
2.
POWER
switches the set
on
MUTE
switches the sound
from
on or
handset, please install the bat-
standby
or
off to
standby.
off.
i
PR
6
ARC
4.
TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
5.
TURBO PICTURE / SOUND BUTTON
selects Turbo picture / sound.
6.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
VOL
OK
VOL
3.
PR
Q.VIEW
15
MIX
123
TIME
7
456
REVEAL
789
PSM
SSM
8
SLEEP
0
M
PLAY
9
REC
STOP
REW
P/STILL
16
17
(Aspect Ratio Control)
changes the picture format.
adjusts
FF
menu
OK
settings.
accepts your selection
7.
(With teletext)
(Without PIP)
PICTURE
PIP
EYE/
18
T
U
R
B
O
SOUND
POSITION
STILL
9/4PIP
SIZE
PR
15
(With teletext
4
9.
VCR BUTTONS (option)
control a LG video cassette recorder.
13. MENU
selects
INPUT
SWAP
/
PIP)
directly
PSM (Picture Status
recalls your preferred
language
the programme table.
a menu.
select
a
number.
Memory)
picture setting.
12. EYE/* (option)
switches the eye function
VOL
PR
PR
or
8.
displays
OK
standby
the current mode.
11. LIST
i
PR
VOL
NUMBER BUTTONS
switches the set on from
displays
10. I/II
selects the language during dual
selects the sound output.
TEXT
MENU
or
on or
off.
broadcast
(option).
Location and function of controls
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PICTURE
5
SOUND
/
PIP)
timer.
PICTURE
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
5
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
EYE/
SOUND
MENU
TURBO
18. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
Battery
POSITION
STILL
(With teletext
sleep
TEXT
MENU
TURBO
15. SWAP or Q.VIEW
returns to the previously viewed programme.
16. SLEEP
sets the
PIP
EYE/
TEXT
(With teletext)
(Without PIP)
POWER
PICTURE
1
10
I/II
MUTE
SOUND
T
U
R
B
O
5
2
2
13
7
5
46
8
79
(only
TELETEXT
models)
or
TV/AV
MENU
0
13
4
installation
PR
The remote control handset is powered by two AAA or AA type batteries. To load the batteries, turn the remote control handset over
and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and
) marked inside the compart-
6
VOL
OK
VOL
PR
-
ment.
17
SSM
8
EYE
ARC
PSM
3
12
Q.VIEW
LIST
SLEEP
AAA
(With teletext)
AA
(Without teletext)
11
15
16
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without teletext
/
PIP)
5
Location and function of controls
Front
panel
CT-29Q26/27 series
CT-25Q26/27 series
11
POWER
STAND BY
POWER
MENU
10
S-VIDEOL/MN
1
OK
VOL
MENU
PR
46823
12
1
OK
VOL
PR
468
23
12
AUDIO
R
AV3
CT-25/29H46/47 series
CT-29K36/37 series
VIDEO L/MONO AUDIO R
TV/AV
S-VIDEO
POWER
POWER
MENU OK
10
VOL
PR
VOL
PR
AV3
VIDEO
L
AV3
(L/MONO)
R
1
23
468
12
12357
9
10 11
12
AUDIO
11
CT-25/29H36/37 series
Side
Panel
AV3
MENU
VOL
PR
VIDEO (L/MONO) AUDIO (R)
STAND-BY
1
1.
OK
POWER
23468
1012
MAIN POWER
switches the set
8.
on or
off.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set
2.
on from standby.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
POWER/STANDBY INDICATOR
illuminates
mode.
brightly
Φ
when the set is in
dims when the set is switched
standby
Γ
on.
9.
3.
/
REMOTE CONTROL SENSOR
+/- (Δ/Ε)
adjusts the
function
switches the set
4.
MENU
selects
on
or
selects
from
10.AUDIO/VIDEO IN SOCKETS
a menu.
a
programme.
standby.
(AV3)
Connect the audio/video out sockets of external equipment to these sockets.
5. TV/AV
selects TV
clears the
or
AV mode.
menu
switches the set
S-VIDEO/AUDIO IN SOCKETS
from the
on
from
(S-AV) (option)
Connect the video out socket of
screen.
standby.
an
S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
6.
OK
VCR to the audio sockets
accepts your selection
or
displays
mode.
(option)
headphone plug to this
socket.
(Function)
selects
volume, EYE (option), picture items
brief auto programme while the
play.
6
in AV3.
11. HEADPHONE SOCKET
Connect the
7.
as
the current
menus
or
not dis-
12.EYE
(option)
adjusts picture according
conditions.
to the
surrounding
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
Press the
TV/AV
programme number with the
Δ
/
Ε
or
POWER
MUTE
ARC
I/II
LIST
NUMBER
EYE
TU
R VOLUME
B SOUND
O
adjustment
Φ
Γ
/
button to
adjust
TEXT
MENU
the volume.
Quick view
i
PR
Press the SWAP
were
or
Q.VIEW button to view the last programme you
watching.
Mute function
PR
PR
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
the
MUTE,
Φ
/
VOL
OK
VOL
display
PR
INPUT
SWAP
Γ, SSM, I/II, TURBO
123
456
Auto Demonstration
To review all the
or
menus
button of the front
programmed in the set,
panel control for about
press the OK
5 seconds. To
demonstration, press any button of the front
stop
control and POWER button of the remote control.
auto
On
screen
language
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
SSM
0
selection
The menu can be displayed
First select your language.
1.
2.
3.
4.
5.
panel
789
PSM
on
the
screen
in desired
language.
MENU button to select the Station menu.
Δ / Ε button to select Language.
OK button.
Δ / Ε button to select your desired language.
OK button.
screen displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
d.
In some models, Tilt, Game or Degauss will not display.
1.
2.
POWER
MUTE
TV/AV
I/II
VOLUME
TEXT
MENU
Repeatedly
BG
AutoOprogramme
ManualOprogramme
System
StorageOfrom
ProgrammeOedit
NormalOsearch
Language
TurboOsearch
1
i
PR
()OOKOMENUOTV
AV
Station
OK
VOL
()O}{OMENUOTV
VOL
Contrast
PR
AV
menu
100
BG
System
Brightness
55
ChannelOOOOV
Colour
60
Fine
Sharpness
50
Search
Tint
0
UHF
20
{{{
NameOOOOOOOOOOOC
20
1
Storage
()O}{OOKOMENUOTV
123
Picture
AV
()O}{OOKOMENUOTV
AV
menu
456
O0OOCO03 OOO5OOSO69
Equalizer
Balance
789
AVL
§Volume
0
O1OOCO03OOO6OOSO17
Off
O2OOCO12OOO7OOSO22
30
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
0
DeleteOOOCopy
MoveOOOOOSkip
()OOKOMENUOTV
AV
Sound
()O}{OOKOMENUOTV
TV
Input
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
AV
menu
0
Flat
Music
Movie
Speech
User
Game
Off
Degauss
()O}{OMENUOTV
AV
Special
TV programme
8
0.1O0.5O1.5O5.0O10OkHz
()OMENUOTV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
()OOKOMENUOTV
AV
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
POWER
MUTE
BG
System
StorageOfrom
1
NormalOsearch
TV/AV
TurboOsearch
()O}{O MENUOTV
4.
5.
6.
7.
AV
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, Only
can
I/II
VOLUME
TEXT
MENU
i
PR
OK
VOL
VOL
select Start.
PR
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
8.
Press the OK button to begin auto programming.
123
456
BG
System
StorageOfrom
NormalOsearch
1
CO15
TurboOsearch
BG
System
StorageOfrom
1
789
NormalOsearch
TurboOsearch
CO38
0
2
MENU
(Normal search)
2%
2
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
TV stations
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
()OOKOMENUOTV
AV
tuning
with five characters to each programme number.
1.
Repeatedly
2.
Press the
3.
Δ
press the MENU button to select the Station menu.
/ Ε button to select Manual programme.
Press the OK button to
the Manual programme
display
menu.
POWER
MUTE
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
TV/AV
I/II
NameOOOOOOOOOOOC
20
1
Storage
()O}{O OKOMENUOTV
VOLUME
TEXT
MENU
4.
Press the
with the
i
PR
5.
OK
VOL
PR
VOL
6.
Φ
Δ
/
/ Ε button to select
Γ
AV
System.
Select
a
TV
system
button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
123
If this station is the one required, press the Δ / Ε button to
select Storage. Select the desired programme number (0 to
99)
789
with the
Φ
/
Γ
button
under 10 is entered with
5.
456
8.
a
or
NUMBER buttons.
numeric '0' in front of
Press the OK button to store it. The
display Stored will
0
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
NameOOOOOOOOOOOC
Storage
20
1
Stored
9.
10
To store another
Any
station, repeat steps
4 to 8.
number
it, i.e. '05' for
appear.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +,
and the alphabet A to Z.
Station
Menu
AutoOprogramme
ManualOprogramme
1 to 3.
ProgrammeOedit
Press the
Language
-,
the numeric 0 to 9
4.
Φ button
you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
5.
Repeat
With the
the 'Manual programme
Fine
fine
tuning
Repeat
Press the
Press the
POWER
MUTE
TV/AV
is
only
necessary if
reception
I/II
is poor.
the 'Manual programme tuning' steps 1 to 3.
Δ / Ε button to select Fine.
Φ / Γ button to fine tune for the best
picture and
1.
2.
3.
viewing.
tuning
Normally
AV
7 to 8.
tuning' steps
Press the TV/AV button to return to normal TV
()OOKOMENUOTV
VOLUME
TEXT
MENU
sound.
BG
System
ChannelOOOOV
UHF
Fine
20
i
{{{
PR
Search
NameOOOOOOOOOOOC
()O}{O OKOMENUOTV
4.
5.
20
1
Storage
OK
VOL
AV
PR
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
Repeat
The
finely tuned programme will
during programme selection.
be indicated
by yellow
VOL
number
123
456
789
0
11
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
POWER
MUTE
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
TV/AV
MoveOOOOOSkip
I/II
()O}{OOKOMENUOTV
AV
Deleting
VOLUME
TEXT
MENU
i
PR
VOL
OK
VOL
PR
PR
PR
INPUT
1.
2.
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/
Γ
button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
SWAP
4.
Press the YELLOW button
again
to release this function.
O0OOCO03 OOO5OOSO69
123
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
456
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
789
Move0off
()O}{OMENUOTV
0
AV
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
POWER
MUTE
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()O}{O OKOMENUOTV
Note
TV/AV
I/II
LIST
AV
:
VOLUME
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
TEXT
MENU
i
PR
Selecting
Select
a
programme in the programme table
Δ / Ε or Φ / Γ button.
programme with the
Then press the OK button.
a
VOL
OK
VOL
The set switches to the chosen programme number.
PR
PR
programme table
10 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the
Δ
/
a
Ε
or Φ
/
Γ
button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
PR
INPUT
SWAP
123
456
789
0
13
Picture
Picture
Menu
Contrast
100
Brightness
55
Colour
60
Sharpness
50
Tint
0
()O}{O OKOMENUOTV
AV
Picture
You
can
ness
1.
2.
3.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
/ Ε button to select the desired picture item.
Φ / Γ button to make
appropriate adjustments.
Repeatedly
Press the
Press the
Δ
Contrast
TV/AV
PICTURE
I/II
LIST
EYE/
T
U
R
B
O
4.
Press the OK button to store it for the picture User.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
TEXT
MENU
Eye (option)
i
PR
VOL
OK
VOL
PR
PR
PR
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
INPUT
SWAP
Off
123
456
789
PSM
0
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the display
in green does not appear continuously
but the display
in yellow appears each time the picture condition changes.
Note
eye
14
80
POWER
MUTE
:
If you press the PSM
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
Picture
adjustment
Picture format
You
can
watch TV in
Contrast
various
(Wide), Zoom 1 or Zoom 2.
Repeatedly press the ARC button
picture formats; Standard,
16:9
55
Colour
60
Sharpness
50
Tint
to select your desired
picture
Picture
Menu
100
Brightness
0
for-
mat.
()O}{O OKOMENUOTV
Standard
This picture format is 4 to 3 of
general
AV
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
POWER
MUTE
TV/AV
PICTURE
ARC
I/II
EYE/
TU
R VOLUME
B
O
i
PR
Note :
When you switch the set to standby or off, the 16:9 or Zoom picture format is reset to the Standard (4:3).
b. In the 1/2 size sub picture and vertical four sub pictures of PIP
mode the picture format is not available.
a.
PR
PR
selection
VOL
OK
VOL
PR
picture
TEXT
MENU
Zoom 2
You can enjoy more magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified to
the upper and lower so that the screen Zoom 2 is full.
Turbo
LIST
INPUT
SWAP
(option)
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
123
456
789
PSM
0
(Turbo Picture off)
Note
:
If you press the PSM
(Turbo Picture on)
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
Sound
Equalizer
Balance
0
AVL
Off
30
§Volume
()OOKOMENUOTV
AV
You
POWER
3.
TV/AV
ARC
I/II
adjustment
select your preferred sound setting; Flat, Music, Movie or
Speech and you can also adjust the sound frequency of equalizer,
balance, headphone volume/sound (option). If you switch AVL to on,
the set automatically keeps on an equal volume level even if you
change programmes. The Turbo sound creates an all around sound
as in a concert hall.
1.
2.
MUTE
adjustment
can
press the MENU button to select the Sound menu.
/ Ε button to select the desired sound item; Equalizer,
Balance, AVL or §Volume (option).
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
Repeatedly
Press the
Δ
LIST
Flat
Music
Movie
EYE
Speech
User
TU
0.1O0.5O1.5O5.0O10OkHz
R VOLUME
B SOUND
O
TEXT
MENU
()O}{O OKOMENUOTV
AV
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
a.
i
PR
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
123
Press the TV/AV button to return to normal TV
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (Flat, Music, Movie, Speech or User) appears.
The sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustdisplay User automatically appears even
though you have already set a factory preset setting; Flat, Music,
Movie or Speech.
Note
:
ment in Sound menu, the
456
789
PSM
SSM
0
Turbo sound selection
(option)
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo Sound off)
16
(Turbo Sound on)
Sound
Stereo/Dual
adjustment
reception (option)
Stereo/dual is an optional function.
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
I/II
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
1.
2.
3.
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
17
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
TV and AV modes
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when a video
other equipment is connected to the set.
or
Game
Off
Degauss
()O}{O MENUOTV
AV
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
POWER
MUTE
TV/AV
I/II
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Input.
PresstheΦ /Γbuttonto selectTV,AV1,AV2,AV3(orS-AV).
The AV modes are :
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the phone jack of the set
AV3 : VCR connected to the AV3 sockets of the set
S-AV : S-VIDEO VCR connected to the S-VIDEO sockets of the
Repeatedly
set
(option)
To return to TV
VOLUME
TEXT
MENU
mode, press the
Alternatively you
TV/AV button.
Auto AV
can
Δ
/
select the TV
Ε or
or
NUMBER buttons.
AV mode
by pressing
the
switching (option)
i
PR
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
123
456
789
0
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode when an AV signal is input.
But if you want to keep on watching TV mode, press the Δ / Ε or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
4.
18
press the MENU button to select the Special
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
menu.
Other functions
Blue back
If you select Blue back On, the blue background appears
screen when there is no or poor signal.
1.
2.
3.
4.
Tilt
press the MENU button to select the Special
Press the Δ/Ε button to select Blue back.
Press the Φ / Γ button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
the
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
Off
Degauss
menu.
()O}{O MENUOTV
AV
POWER
MUTE
picture may tilt to the left
position. This function can
Menu
Game
(option)
The TV
another
1.
2.
3.
4.
on
Special
TV
Input
ChildOlock
right if the TV set moves to
be used to compensate the tilt.
or
Repeatedly press the MENU button to select the Special
Press the Δ/Ε button to select Tilt.
Press the Φ / Γ button to adjust the tilt.
Press the TV/AV button to return to normal TV viewing.
TV/AV
I/II
menu.
VOLUME
TEXT
MENU
Game
1.
2.
3.
4.
5.
6.
7.
(option)
press the MENU button to select the Special menu.
Press the Δ/Ε button to select Game.
Press the OK button to enter the game mode.
Press the Δ /Ε button to select the game 1 or 2, then press the
OK button.
Press the Φ/Γ button to select a level, then press the OK button.
Press the Δ/Ε button to select the music on or off.
Press the OK button to start the game.
Repeatedly
i
PR
PR
PR
1. PERFECT PUZZLE
8.
Press the Φ/Γ button to move the object to the left or right.
Press the Ε button to make the object fall down and press the
OK button to change the order of icons inside the object.
The game scores are displayed on the screen.
VOL
OK
VOL
PR
INPUT
SWAP
2. QUICK BRAIN
8. Select a pair of cards with same picture by pressing the Δ/Ε,
Φ/Γ and OK button.
If you find all the pairs of cards with same picture in a level, the
next level begins automatically.
Note :
Press the TV/AV
a.
b.
viewing.
If you want
a new
or
MENU button to return to the normal TV
game, press the RED button to start.
19
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
Game
Off
Degauss
()O}{O MENUOTV
AV
POWER
MUTE
Degaussing (option)
to the super large Braun Tube in the set the magnetic field
of the earth may influence on the colour purity of picture by neighbour magnetic substance or installation direction of the set. The
Owing
may appear on the screen or the colour may not be equal in
You can enjoy the programme in high colour quality by
operating the Degaussing.
stripes
the
corner.
1.
press the MENU button to select the Special menu.
Press the Δ/Ε button to select Degauss.
Press the Φ /Γ button to select On.
After the degauss function works, On mode switches to Off
2.
3.
TV/AV
Repeatedly
mode.
I/II
4.
Press the TV/AV button to return to normal TV
Note : If you cannot adjust the
it again after about 4 minutes.
VOLUME
screen
condition
viewing.
by degaussing, try
TEXT
MENU
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
i
PR
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The disOK
VOL
VOL
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
PR
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
123
456
789
SLEEP
0
20
M
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function
can
operate.
PIP
in
(Picture
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch
sub pictures.
Press this button
Input
again
on one
of the
1/16, 1/4 and 1/2 size
to switch it off.
mode selection for sub
Press the INPUT button to select the
picture
input
POWER
MUTE
mode for the sub
picture.
Each time this button is pressed, each input mode for the sub
ture is displayed as shown below at the left upper side of sub
picpic-
TV/AV
I/II
LIST
PIP
ture.
Main
AV3
Sub
picture
picture
TV
AV1
AV2
AV3
(or S-AV) (option)
AV1
TV
AV2
AV3
(or S-AV) (option)
AV2
TV
AV1
AV3
(or S-AV) (option)
TV
(or S-AV) (option)
Swapping
AV1
between main and sub
Press the SWAP button to
Programme
exchange
TEXT
9/4
PIP
i
pictures
pictures.
PR
picture (option)
picture programme
selection is available when the sub
ture is TV mode. Press the PR +/- buttons to select
INPUT
picture
pic-
1/4 size
picture
again
M
picture.
to restore motion.
picture position change
Press the POSITION button
repeatedly until
pictures move
achieved. The 1/16 and 1/4 sub
or
SLEEP
0
freeze
Press this button
9
picture
789
1/2 size
Press the STILL button to freeze motion of the sub
Sub
TIME
REVEAL
1/16 size of the main
picture
MIX
123
456
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
Sub
SWAP
a
programme
for the sub picture. The selected programme number is displayed
at the left upper side of sub picture.
Sub
VOL
OK
VOL
PR
The sub
POSITION
STILL
SIZE
AV2
the main and sub
selection for sub
VOLUME
4 sub
desired
position
is
clockwise.
picture
Press the 9/4 PIP button
repeatedly
to select 9
or
4 sub
pictures.
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
POWER
MUTE
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
TV/AV
I/II
LIST
VOLUME
TEXT
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page nimber indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
i
PR
SIMPLE text
VOL
OK
VOL
Page selection
1.
PR
PR
PR
INPUT
SWAP
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
123
Programming
456
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
789
SLEEP
0
page.
M
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
22
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
can
4.
coloured button.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
POWER
MUTE
TV/AV
I/II
LIST
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
VOLUME
TEXT
POSITION
STILL
FASTEXT
9/4PIP
SIZE
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
i
PR
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
page.
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
123
456
789
SLEEP
0
M
23
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
POWER
MUTE
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
TV/AV
I/II
LIST
Press this
page.
Press this button
VOLUME
TEXT
to return to the normal
the TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
POSITION
9/4PIP
SIZE
i
PR
display.
UPDATE
Displays
STILL
again
half of the page.
the bottom half of the
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
OK
VOL
VOL
the automatic page
Stops
text page consists of 2
which will
occur
if
tele-
a
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
PR
PR
change
PR
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
123
TIME
456
REVEAL
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
789
SLEEP
0
MIX
M
To switch the TV
Note
:
picture
off press this button
When TV and text
picture
are
again.
displayed half and
half
of the screen, MIX function is not available.
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
24
again
to exit this function.
RED/GREEN,
Δ
/
Ε
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
L L 75Ω
OUT
VIDEO
(LMONO)-AUDIO-(R)
IN
Aerial socket
1.
2.
3.
4.
5.
AV2
1
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
L L 75Ω
OUT
VIDEO
(LMONO)-AUDIO-(R)
IN
AV2
1
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
can
also record programmes received
out sockets.
by
the TV
on
video
VCR
ANT IN
L L 75Ω
OUT
Euro scart socket
1.
2.
OUT
VIDEO
VIDEO(L MONO) -AUDIO-(R)
tape via audio/video
IN
(option)
(LMONO)-AUDIO-(R)
IN
AV1
AV2
VCR
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 mode automatically. But if you
want to keep on watching TV mode, press the Δ / Ε or NUMBER buttons.
S-VIDEO
L/MON
AUDIO
R
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
VCR
screen.
You
can
also record programmes received
by
the TV
on
AV3
video
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a computer, pay TV decoder, game
machine or photo CD unit, etc.
ANT IN
L L 75Ω
OUT
VIDEO(L/MONO)
-AUDIO-(R)
IN
1
AV2
VCR
25
Connection of external
equipment
S-video / Audio in sockets
When
connecting
picture quality will
S-VIDEO
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO
be further improved.
socket, the
L/MON
AUDIO
R
1.
AV3
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
3.
sockets of the set.
Select S-AV by pressing the TV/AV button
4.
Press the PLAY button
S-VIDEO VCR
The VCR
on
repeatedly.
the VCR.
playback picture
appears
on
the
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEOL/MN
AUDIO
Headphone
R
AV3
Insert the
You
Equalizer
Flat
Balance
AVL
§Volume
0
can
socket
headphone socket of the set.
through the headphone and the TV's
headphone volume, press the Δ / Ε button
headphone plug
to the
listen to the sound
speakers.
To
to select
§Volume then press the
menu.
adjust
the
See the 'Sound
Off
adjustment'
Φ /
section.
Γ
button in the Sound
[0I]20
If you press the MUTE
are
()O}{O OKOMENUOTV
(option)
button, only the sound from the TV's speakers
switched off.
AV
In some models, when a programme is received in dual language, you can select a language (DUAL I, DUAL II or DUAL
I+II) for the sound from the headphone regardless of that from
the TV's speakers. In the Sound menu, press the Δ / Ε button
to select§Volume then I/II button to select the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
26
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF