LG | MT-42PZ43V | LG MT-42PZ43V Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
MT-42PZ40V/B/R/S
MT-42PZ41V/B/R/S
MT-42PZ41M/B/R/S
MT-42PZ42V/B/R/S
MT-42PZ43V/B/R/S
MZ-42PZ42V/B/R/S
MZ-42PZ43V/B/R/S
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0398A
cover
require
(RF02RA,
and quote this infor-
service.
092K TX,
373-026H)
a
LG Plasma Monitor
What is
a
Plasma
Display
?
If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent
light is emitted. A Plasma Display is a next generation flat Display using this phenomenon.
160°
Wide
-
A Plasma
angle
substance. At this moment,
range of vision
Display provides
than 160°
more
angle
range of vision
so
that you
can
get
a
without distortion from any
picture
direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
screen
The
screen
of
a
Plasma
Multimedia Plasma
A Plasma
and
The
Display
can
Display
is 42"
that you
so
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
a
computer
so
that you
can
it
use
as a screen
for
conference, game, internet
so on.
explanation
about coloured dots may be present
The PDP which is the
display
device of this
is
product
composed
in the manufacture of the PDP. Several coloured dots visible
on
PDP
screen
of 0.9 to 2.2 million cells and
on
the
screen
would be
a
few cell defects
acceptable,
manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
sponds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
The
explanation
In the
same
way that
a
fan is used in
a
a
PC to
keep
the CPU
corre-
cool, the PDP is equipped with cooling fans
certain level of noise could
occur
to improve the
operated. This noise doesn't have
difficulty while using this product. The
when the fan is
and
liability and it's also determined to have no
operation of this product. We hope you will understand
changeable nor refundable.
noise from the fans is normal in the
It
which
about noise of 42" PDP
reliability of this product. Therefore,
any negative effect on its efficiency
acceptable.
can occur
in line with other PDP
means
that it is not
that
a
certain level of noise is
WARNING
MT-42PZ41/43 / MZ-42PZ43 series
cause
radio interference in which
:
This is Class A
case
the
user
product. In a domestic environment this product
required to take adequate measures.
may
may be
WARNING
MT-42PZ40/42 / MZ-42PZ42 series
may
cause
:
This is Class B
radio interference in which
case
the
product.
user
may be
In
a
domestic environment this
required
to take
adequate
product
measures.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Contents
Safety
Step
Instructions .....................................................................................................4
1. Monitor Installation &
Controls and Connection
Setup
Options
..............................................................6
External
Equipment Connections ...............................................................7
External Equipment Viewing Setups ..........................................................8
Remote Control Key Functions.................................................................11
Monitor Installation/Mounting Options ......................................................13
Step
2. Customize your Monitor's Features
Basic Features Setup and Operation
Turning on the Monitor .............................................................................13
Menu Language Selection (option) ..........................................................15
Picture Menu Options
PSM (Picture Status Memory)..................................................................15
Manual Picture Control .............................................................................15
Sound Menu
Options
(Sound Status Memory)...................................................................16
AVL (Auto Volume Leveler) ......................................................................16
Adjusting Sound Control...........................................................................16
Special Menu Options
Menu Rotation For Vertical Viewing .........................................................17
SSM
Orbiter.......................................................................................................17
White Wash ..............................................................................................17
Sleep Timer ..............................................................................................17
Adjusting Auto Colour Control ..................................................................18
Manual Colour Temperature Control .......................................................18
Child Lock .................................................................................................18
Screen Menu
Options
Adjustment .......................................................................................19
Adjusting Horizontal/Vertical Position .......................................................19
Picture Phase Adjustments ......................................................................19
Initializing ..................................................................................................19
Selecting Wide VGA mode .......................................................................20
Screen Adjustments..................................................................................20
Auto
Luminance Noise Reduction ....................................................................20
Setting Picture Format..............................................................................21
Split Zoom ................................................................................................21
Picture Size Zoom ....................................................................................21
PIP
(Picture In Picture) Feature
Watching PIP ............................................................................................22
Selecting a Input Signal Source for PIP ...................................................22
Using Sub picture Still Function ...............................................................22
Moving the PIP .........................................................................................22
Selecting PIP Sound Options ...................................................................22
Twin Picture Setup Options
Watching Twin Picture ..............................................................................23
Selecting a Input Signal Source for Twin Picture .........................................23
Selecting Twin Picture Sound Options .....................................................23
Using Sub picture Still Function ...............................................................23
Step.3
Miscellaneous
External Control Device
Setup .................................................................24
(NEC format) ..............................................................................29
Troubleshooting Checklist ........................................................................31
Product Specifications ..............................................................................35
IR Code
After
reading
this
manu-
al, keep it in the place
where the
always
user can
contact
easily.
3
Instructions
Safety
Use the Monitor at the
-
lower than the altitude of 6562 feet
place
(2000m)
to
get the best quality of picture
and sound.
W
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
Do not
use
room or
fire.
the Monitor in
any
This may
-
cause a
place
cause a
Do not
-
damp place such as a bathlikely to get wet.
where it is
fire
could
or
give
an
electric shock.
In
cable
antenna
building
to
and
damaged
damaged
of smoke
or
the Monitor
could
give
an
electric
strange smell from the Monitor,
,unplug it from the
your dealer
or
This may
cleaning.
or
wall outlet and contact
service center.
cause a
fire
or
could
give
an
electric shock.
outside
Do
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
case
water the Monitor while
cause
switch it off
-
Bend
use
This may
shock.
inside the Monitor and could
not
attempt
to
Contact your dealer
-
This may
shock.
cause
service
or
the
Monitor
yourself.
service center.
damaged
the Monitor
or
could
give
an
electric
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
a
danger
of
electric shock caused
-
If
er
grounding
should be
methods
are
employed
not
During
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
possible, a separate circuit breakby a qualified electrician.
and installed
-
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
Power
supplier
Short-circuit
breaker
-
Do not connect
ground
to
telephone wires, lightning
rods
or
gas
pipe.
Do not
placing anything containing liquid
on
top of
the Monitor.
-
This may
cause a
Do not insert any
-
This may
Do not
-
cause a
fire
or
could
cause
an
or
could
serious
injury
give
on
to
a
an
4
This set is
vent.
electric shock.
the Monitor.
child
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
give
or
adult.
only
supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
damage
or
death.
of the
product.
Take
care
of
under
danger that may happen
specific condition.
NOTES
Never touch the power
-
This may
cause an
plug with
a
wet hand.
Do not
electric shock.
aged
plug
the
or
when the power cord or the plug is damconnecting part of the power outlet is
loose.
Disconnect from the mains and
tions before
Do not
as a
-
all
connec-
-
This may
cause a
fire
or an
electric shock.
moving.
place the Monitor
bookcase
Ventilation
remove
in
a
built-in installation such
rack.
or
Dispose of used batteries carefully
eating them.
to
protect
a
child
from
-
In
case
that it eats them, take it to
see a
doctor
immediately.
required.
When
moving the Monitor assembled with speakers
holding the speakers.
do
not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
This may
shock.
cause
damaged
the Monitor
Contact the service center
When
to
-
installing the Monitor on
place the edge of its stand.
table,
a
be careful not
injury
to
could
a
year to clean the
give
an
electric
internal part of the Monitor.
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
once
or
Accumulated dust
can cause
mechanical failure.
a
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
Do not
place
an
outside antenna in the
head power lines
or
vicinity of overother electric light or power cir-
screen.
-
If not, eyes will strain.
cuits.
-
This may
cause an
electric shock.
Unplug the Monitor
from the wall outlet when it is left
unattended and unused for
-
Accumulated dust may
deterioration or electric
Only
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
antenna
touching
-
an
outside
power lines to keep the former from
the latter even when the antenna falls.
This may
Do not
-
enough distance between
and
cause an
pull the
This may
electric shock.
cord but the
cause a
plug
when
unplugging.
fire.
Ensure the power cord doesn't trail
like a heater.
across
any hot
objects
-
This may
cause a
fire
or an
electric shock.
5
Controls of the Monitor
<Front Panel Controls>
INPUT
SELECT
ON/OFF
Main Power Button
MENU
VOL.
Δ,Ε Buttons
INPUT SELECT Button
VOLUME
Remote Control Sensor
MENU Button
(Φ,Γ) Buttons
Power
Standby Indicator
standby mode,
Illuminates red in
Illuminates green when the
Monitor is turned on
<Back Panel>
ON/
()R ()
R AUDIO L
RS-232C INPUT
(CONTROL/SERVICE)
RS-232C
INPUT
RGB2 INPUT
(DIGITAL
RGB
RGB1 INPUT
INPUT)
(PC INPUT)
RGB2 INPUT
(DIGITAL
RGB INPUT)
RGB1
INPUT
AUDIO INPUT
RGB1 OUTPUT
(PC OUTPUT)
RGB AUDIO
INPUT
REMOTE
CONTROL
CONTROL
LOCK
cable and
a
PB
PR
R AUDIO L (MONO)
S-VIDEO
VIDEO INPUT
AC INPUT
AUDIO
INPUT
VIDEO INPUT
Connection to AV
DVI cable
AUDIO INPUT
S-VIDEO
INPUT
NENT(480i/480p)
(DVD INPUT)
Note: The connection cables shown above to the
15-pin
Y
COMPONENT(480i/480p)
(DVD INPUT)
COMPO-
Connection to PC
A D-sub
AUDIO INPUT
COMPONENT
AUDIO INPUT
(PC
INPUT)
6
OFF
()L ()
EXTERNAL SPEAKER
are
right
provided
are
equipment
not included with the Monitor.
to connect the Monitor to
a
PC.
External
Watching
Equipments
<Back Panel>
RCA
Type
ON/
()R ()
1
Scart
OFF
Y
AUDIO
()L ()
2
3
PB
PR
4
AUDIO
(MONO)
5
6
Type
ON/
()R ()
OFF
()L ()
5
1.
EXTERNAL SPEAKER
Connect to
*
For further
(8
ohm
output)
speaker(s).
information, refer to 'Speaker
optional
4.
external
REMOTE CONTROL
&
Speaker
Stand'
When "CONTROL LOCK" is set
manual.
2.
RS-232C
INPUT(CONTROL/SERVICE)
port
on a
PORT
5.
PC.
Connect the monitor
Note
output socket of the PERSONAL COM-
OUTPUT(PC OUTPUT) SOCKET
watch the RGB1 signal on another monitor, connect
RGB1 OUTPUT (PC OUTPUT) to another monitor's PC
input port. When the monitor is in standby mode, you can not
watch the RGB1 signal on another monitor.
can
COMPONENT(480i/480p)(DVD INPUT)
/ S-VIDEO
EURO SCART SOCKET
:
The interface
board(AP-42EA40/41)
is not
equipped
MT/MZ-42PZ42/43 series models. Contact your dealer
for buying this optional item.
on
PUTER to this socket.
RGB1
AUDIO /
/ VIDEO INPUT / AUDIO INPUT SOCKETS
RGB2 INPUT(DIGITAL RGB INPUT)/RGB1 INPUT(PC
INPUT)/AUDIO INPUT SOCKET
You
"ON", Monitor is operated by
the external control device.
Connect to the RS-232C
3.
CONTROL LOCK Switch
6.
POWER CORD SOCKET
This Monitor
operates
cated
Specifications page.
on
the
the Monitor
on
on an
AC power. The voltage is indiNever attempt to operate
DC power.
7
External
VCR (When the Interface board is installed.)
Watching
The interface
-
When
Audio
-
-
-
the Monitor to external
connecting
(R) -red).
Connect the VIDEO INPUT socket
with the BNC-RCA
adaptor
connecting ports (Video
to the VIDEO INPUT
having
a
fixed
image
remain
on
the
for
screen
a
on
long period
from
If
picture format is used; the fixed image may remain visible on the screen.
picture noise (interference), leave an adequate distance between the VCR
a
4:3
a
-
yellow,
Audio
(L)
-
the Monitor.
a
regular
of time.
Typically
a
frozen still
on
the remote control to select Video
or
(AV1
or
and Monitor
AV2).
connected to
S-VIDEO, select the S-Video external input source.)
video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's manual)
a
Cable TV (When the Interface board is installed.)
The interface
is not
board(AP-42EA40/41)
equipped
on
MT/MZ-42PZ42/43 series models.
After
subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.
For further information regarding cable TV service, contact your local cable TV service provider(s).
1. Use the INPUT SELECT button
2. Tune to cable service
The interface
When
the
Or,
provided
on
the remote control and select Video
channels
using
or
(AV1
or
AV2).
the cable box.
external AV
Watching
source (When the Interface board is installed.)
board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43
the monitor to
connecting
an
series models.
external source, match the colours of AUDIO/VIDEO
the audio/video equipment: Video
yellow, Audio (Left) white, Audio
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
output jacks
on
=
1. Use the INPUT SELECT button
the
Operate
corresponding
on
external
=
input jacks on
(Right) red.
the monitor with
=
the remote control to select Video
equipment.
See external
or (AV1 or AV2).
equipment operating guide.
DVD (When the Interface board is installed.)
The interface board(AP-42EA40/41) is not equipped on MT/MZ42PZ42/43 series models.
Watching
?
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
below.
How to connect
Connect DVD video
INPUT)
Or,
and audio
inputs to Y, PB, PR of COMPONENT (DVD
inputs to Audio sockets of AUDIO INPUT.
Component ports
of the
Monitor
connect the Euro scart socket of the VCR to the Euro scart socket
YPBPR
of the set.
How to
1. Turn
Video
use
on
the DVD
player,
and insert
2. Use INPUT SELECT button
on
Component or (AV1 or AV2).
operating instructions.
8
white,
VCR.
To avoid
Watching
2.
match the colours of
picture
2. Insert
-
(yellow)
MT/MZ-42PZ42/43 series models.
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Use the orbiter function to Avoid
(If
-
equipment,
on
input.
1. Use the INPUT SELECT button
-
equipped
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting
Or,
-
is not
board(AP-42EA40/41)
VCR to the Video
-
Equipment Viewing Setups
a
of DVD
DVD.
the remote control to select
Refer to the DVD
output ports
player's
manual for
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
PC
Connecting
-
-
-
-
-
To
enjoy vivid picture and sound, connect a PC to the Monitor.
Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Connect PC to the RGB1 INPUT(PC INPUT) or RGB2 INPUT(DIGITAL RGB INPUT) port of the Monitor; change the resolution output of PC accordingly.
There might be a noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Then change
the PC mode into other resolution or change the refresh rate into other rate or adjust the brightness and contrast on the
menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card
or consult it to the manufacturer of the PC graphic card.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Setup Instructions to Connect a
We recommend using 640x480,
-
-
-
-
-
-
If the resolution of PC is
PC to your Monitor
60Hz for the PC mode,
they provide
the best
picture quality.
UXGA, there will be no picture on the Monitor.
Connect the signal cable from the monitor output port of the PC to the RGB1 INPUT(PC INPUT) port of the Monitor
the signal cable from the DVI output port of the PC to the RGB2 INPUT(DIGITAL RGB INPUT) port on the Monitor.
over
Connect the audio cable from the PC to the Audio
If
using
a
sound
card, adjust PC sound
as
input
required.
on
the Monitor.
(Audio
cables
are
not included with the
or
Monitor).
This monitor
apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC proadjusts automatically to use this monitor.
DDC protocol is preset for RGB1 (Analog RGB), RGB2 (DVI, Digital RGB) mode.
If required, adjust the monitor settings for Plug and Play functionally.
If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB1 INPUT
(PC INPUT) or RGB2 INPUT (DIGITAL RGB INPUT) to display the PC on the monitor.
If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB1 or RGB2;
(the other mode is set to Plug and Play automatically by the monitor.)
DOS mode may not work depending on video card if using a DVI-I cable.
To see a normal picture, match the VGA mode and DVI signal (640x480, 852x480, 848x480). (See page 19)
tocol. The PC
-
-
-
-
-
PC
Setup
1. Turn
on
the PC and
2. Turn
on
the
apply power to
display by pressing the
3. Use the INPUT SELECT button
4. Set the resolution
on
output of the PC
the Monitor.
POWER button
on
the Monitor's remote control.
the remote control to select the RGB1
to SXGA
or
under
(1280
x
or
RGB2
input
source.
1024, 60Hz).
9
Displayable
Monitor
Specification
<RGB1 Mode>
Resolution
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
DDC
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
31.468
70.09
800x600
64.016
100.00
37.861
85.08
832x624
49.725
74.55
DDC
640x350
o
31.469
70.08
o
848x480
31.469
59.94
37.927
85.03
o
or
35.000
70.06
31.469
59.94
o
852x480
37.500
75.00
35.000
66.66
o
48.363
60.00
o
37.861
72.80
o
56.476
70.06
o
37.500
75.00
o
60.023
75.02
o
43.269
85.00
68.677
84.99
45.913
90.03
54.348
60.05
o
63.995
70.01
o
67.500
75.00
o
77.487
85.05
68.681
75.06
o
60.000
60.000
o
75.000
75.00
o
63.981
60.02
o
640x400
1024x768
640x480
53.011
100.04
64.062
120.00
35.156
56.25
o
37.879
60.31
o
48.077
72.18
o
46.875
75.00
o
53.674
85.06
56.000
90.00
Horizontal
Vertical
1152x864
800x600
1152x870
1280x960
1280x1024
<RGB2 Mode>
Resolution
Frequency(KHz) Frequency(Hz)
DDC
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
31.468
70.09
800x600
64.016
100.00
37.861
85.08
832x624
49.725
74.55
DDC
640x350
31.469
70.08
o
848x480
31.469
59.94
37.927
85.03
o
or
35.000
70.06
31.469
59.94
o
852x480
37.500
75.00
35.000
66.66
48.363
60.00
37.861
72.80
56.476
70.06
37.500
75.00
60.023
75.02
43.269
85.00
68.677
84.99
45.913
90.03
54.348
60.05
63.995
70.01
o
640x400
o
1024x768
640x480
o
53.011
100.04
64.062
120.00
67.500
75.00
35.156
56.25
77.487
85.05
37.879
60.31
68.681
75.06
o
48.077
72.18
60.000
60.000
o
46.875
75.00
75.000
75.00
53.674
85.06
63.981
60.02
56.000
90.00
1152x864
800x600
10
o
1152x870
1280x960
1280x1024
o
Remote Control
When
-
Functions
Key
using the remote control aim it at the remote control sensor of the Monitor.
maybe a defect in consecutive operation of remote control in specified brightness according
There's
-
to this monitor
feature.
POWER
Switches the Monitor
by
on
or
from stand-
off to
standby.
INPUT SELECT
SLEEP
Sets the
sleep
POWER
timer.
SSM
SLEEP
PSM
Adjusts
INPUT SELECT
PSM
the
factory preset picture
according to the room.
ARC
ZOOM
ARC
the
Changes
picture
ZOOM
SPLIT ZOOM
+
CHILD LOCK
MENU
MUTE
picture
ZOOM+
size.
OK
VOL
Enlarge
with
Enlarges
To
regular
by
Exits the current
Memorizes
menu
one.
menu.
1
2
3
4
5
6
7
8
9
PIP
POWER
STOP
P/STILL
REW
PLAY
FF
PIP INPUT
Φ / Γ
(Volume button)
option.
menu
settings.
REC
VCR BUTTONS
PIP
picture.
SOUND SELECT
a menu
Adjusts
mode for the
sub
Selects
Increases/decreases sound level.
on
TWIN PICTURE
input
off.
Δ/Ε
0
Selects the
on or
OK
changes.
picture
remote
only.
Switches the sound
NUMBER buttons
Switches the sub
size.
MUTE
MENU
on screen menus one
picture
operate the monitor with
control
Displays
the main
CHILD LOCK
SPLIT ZOOM
screen
AUTO CONFIG.
format.
VOL
the
appropriate to
viewing program character:
Flat, Speech, Movie, Music, or User
AUTO CONFIG.
-
ZOOMReduces the main
To select the sound
your
SSM
TWIN PICTURE
PIP INPUT
Controls
a
LG video cassette
recorder.
SOUND SELECT PIP POSITION
PIP STILL
Select main
sub
picture sound or
picture sound for PIP.
PIP POSITION
change
the sub
picture position.
PIP STILL
Freeze sub
Installing
picture
motion.
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
cover on
Install two 1.5V alkaline batteries of AAA
batteries with
new
the back side and
polarity.
type. Don't mix used
batteries.
11
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
ZOOM
AUTOCONFIG.
ZOOM
-
SPLIT ZOOM
+
CHILDLOCK
MENU
MUTE
OK
VOL
1
VOL
2
4
5
7
8
3
6
9
0
LG TV
1.5V
POWER
REW
STOP
P/STILL
PLAY
FF
REC
1.5V
ASmark
Owner's Manual
D-sub 15
Optional
Alkaline batteries
cable
TWINPICTURE
BNC-RCA
adaptor
(optional)
Power Cord
PP INPUT
PIPSTILL
Remote Control handset
Phone scart cable
DVI-D Cable
(Optional)
Extras
Optional
-
pin
PIP
SOUNDSELECT PIPPOSTION
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
Contract your dealer for
-
Tilt wall
Vertical Wall
buying
mounting
mounting
these items.
bracket
bracket
Wall
Desktop
Video cables
12
mounting
stand
bracket
Ceiling mounting
Speakers
Audio cables
bracket
Desktop Speaker
stand
Monitor Installation
?
The Monitor
?
Install this monitor
?
This monitor is
can
Options
be installed in different ways such as on a wall, or on a desktop etc.
only in a location where adequate ventilation is available.
designed
so
that it
be mounted either
can
Wall Mount: Horizontal Installation
horizontally
or
vertically.
Wall Mount: Vertical Installation
yyyyyy
yyyyyy
yyyyyy
yyyyyy
yy
?
The monitor
yy
can
be installed
on a
wall
as
shown
?
above.
?
(For further information, refer to the optional
'Wall Mounting Bracket Installation and Setup Guide'.)
Speakers are optional, and are shown for illustration
only.
The monitor
can be installed vertically on the wall as
above.(For further information, refer to the
optional 'Wall Mounting Bracket Installation and Setup
Guide'.)
Caution: When installing the monitor vertically, the
front panel controls must be in the left-down side posi-
shown
tion
?
?
as
shown above.
Speakers
only.
Note: To
source's
Desktop
?
are
use
optional,
and
the Monitor in
image
are
a
shown for illustration
vertical
must also be in
a
orientation, the
vertical format.
Pedestal Installation
The Monitor
can
be mounted
on a
desk
as
shown
above.
?
(For further information, refer to the optional
'Desktop Stand Installation and Setup Guide'.)
Speakers and speaker stands shown are optional, and
are shown for example only.
13
Caution
?
?
When
installing the monitor vertically, you have to change the menu display
correctly and also to protect the monitor from overheating (Refer to p. 17).
Install this monitor only in a location where adequate ventilation is available.
To Mount
on a
Wall
To Install
Wall mount minimum allowable clearances for
so
that the
adequate
Desktop
ventilation.
2 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
2.36 inches
Turning
When
using
Turning
the remote
the Monitor
on
1. Connect power cord
2. Press the
control, aim it
just
on
Press the
the Monitor
Press the
14
or
was
on
the Monitor.
on
the Monitor. At this moment, the Monitor is switched to
was
cord is still
turned off with the
on
connected)
ON/OFF button
on
the Monitor to turn the Monitor
the Monitor
on.
turned off with the remote control and the ON/OFF button
ON/OFF button
press the
on the Monitor or press the POWER,
the remote control and then the Monitor will switch on.
(power
ON/OFF button
2. If the Monitor
Monitor
sensor on
after installation
ON/OFF button
1. If the Monitor
?
at its
correctly.
INPUT SELECT button
Turning
the Monitor
on
mode. Press the INPUT SELECT button
standby
?
will appear
2 inches
4 inches
-
menus
Pedestal mount minimum allowable clearances for
ventilation.
adequate
on a
mode
on
on
the Monitor
the Monitor and then press the INPUT SELECT button on the
on the remote control to turn the Monitor
POWER, INPUT SELECT button
on.
Language Selection (option)
Menu
The
-
menus can
be shown
on
the
screen
1. Press the MENU button and then
use Δ
in the selected
language.
/ Ε button to select the
First select your
Special
language.
menu.
2. Press the Γ button and then
use Δ
/ Ε button to select
3. Press the
use Δ
/ Ε button to select your desired language.
will be shown in the language of your choice.
From this
Γ
button and then
point
on, the
Language.
on-screen menus
4. Press the MENU button.
Picture Menu
PSM
-
-
Options
(Picture Status Memory)
This function
RGB1/2
When
adjusts the Monitor to the best picture appearance. (This function doesn't work in
adjusting picture options (contrast, brightness, color, sharpness and tint) manually, PSM
changed to User.
is
mode.)
automatically
1. Press the PSM button
?
Each press of the PSM button
or Φ / Γ
You
?
Picture
and
-
-
You
In
In
the
screen
display
as
shown below.
User
also select Dynamic, Mild or User in the Picture menu.
options Dynamic and Mild are preset and programmed for good picture quality
cannot be changed.
can
Manual Picture Control
-
changes
Mild
Dynamic
?
button
factory
(User option)
adjust picture contrast, brightness, colour, sharpness and tint to the levels
PIP and Twin picture mode, settings are not adjustable.
the broadcasting system PAL/SECAM, the picture item TINT doesn't work.
can
1. Press the MENU button and then
2. Press the Γ
at the
button and then
3. Press the Γ button and then
4. Press the MENU button.
use Δ / Ε
use Δ /
button to select the Picture
Ε button to select the desired
use Φ / Γ
button to make
you
menu.
picture option.
prefer.
Picture
PSM
Contrast
Γ
100
Brightness
appropriate adjustments.
Colour
Sharpness
Tint
15
Sound Menu
SSM
-
-
Options
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically
selects the appropriate sound option based on the program content.
When adjusting sound options (treble, bass, and balance) manually, SSM is automatically changed to User.
1. Press the SSM button.
2. Press the SSM button
or Φ / Γ
Flat
?
AVL
-
You
can
(Auto
button to select your desired sound.
Movie
Speech
also select
Volume
Flat, Speech, Movie, Music,
or
Music
User in the Sound
User
menu.
Leveler)
This feature maintains
an
equal
volume
level;
even
if you
change
1. Press the MENU button and then
use
2. Press the Γ
Δ / Ε button to select AVL.
button and then
use
Δ / Ε
channels.
button to select the Sound
menu.
Sound
SSM
AVL
Γ
Treble
3. Press the Γ
button and then
use
Δ / Ε button to select On or Off.
On
Off
Bass
Balance
4. Press the MENU button.
Adjusting
Sound Control
(User option)
1. Press the MENU button and then
2. Press the Γ button and then
use Δ / Ε
use Δ / Ε
button to select the Sound
Sound
menu.
button to select the desired sound item.
SSM
AVL
Treble
3. Press the Γ button and then
4. Press the MENU button.
16
use Φ /
Γ button to make
appropriate adjustments.
Bass
Balance
Γ
50
Special
Menu
Menu Rotation for Vertical
Viewing
1. Press the MENU button and then
2. Press the Γ button and then
3. Press the Γ button and then
?
Select Normal
?
Select Rotate
use Δ / Ε
the Δ
button to select the
Special
Special
menu.
button to select OSD Rotate.
use Δ / Ε
use
/ Ε
if the monitor is installed
Language
OSD Rotate
Normal
Γ
Rotate
Orbiter
button to select Normal or Rotate.
if the monitor is installed
:
:
Options
White Wash
Colour
horizontally.
vertically.
Temp.
Set ID
4. Press the MENU button.
Orbiter
-
Avoid
allowing
a
fixed
image
PC/video game displayed
you change the image.
a
-
To avoid
Left
-
→
a
permanent image
Downside
the
on
on
screen
the Monitor's
for
screen
for
prolonged periods
the screen, the
screen
will
a
long period
will result in
move
an
of time. A frozen still picture from
ghost image remaining even when
every 2 minutes:
Right → Upside → Upside → Right → Downside → Left
may help prevent ghost images. However, it is best not to
→
The Orbiter feature
the
to remain
on
allow any fixed
image
to remain
on
screen.
1. Press the MENU button and then
2. Press the
Γ
button and then
3. Press the Γ button and then
use Δ / Ε
use Δ / Ε
use Δ / Ε
button to select the
Special
Special
menu.
button to select Orbiter.
button to select On
or
Language
OSD Rotate
Orbiter
Off.
Γ
Colour
4. Press the MENU button.
On
Off
White Wash
Temp.
Set ID
White Wash
-
-
-
White Wash
removes
permanent images from the
screen.
Set White Wash 'On' until fixed image disappears. To return the viewing screen, set White Wash 'On'.
A excessive permanent image is impossible to clear with using this function perfectly.
1. Press the MENU button and then
2. Press the Γ button and then
3. Press the Γ button and then
?
When you select
On, the
use Δ / Ε
use Δ / Ε
use Δ / Ε
screen
button to select the
Special
Special
menu.
button to select White Wash.
button to select On
changes
or
Language
OSD Rotate
Orbiter
Off.
White Wash
Colour
to white.
Temp.
Γ
On
Off
Set ID
4. Press the MENU button.
Sleep
-
-
Timer
Sleep
timer turns the Monitor off at the
preset time.
zz
Press the SLEEP button to select the number of minutes. The
lowed
by 10, 20, 30, 60, 90, 120,
a.
To check the
b.
To cancel the
c.
If you turn
180 and 240. The timer
display
begins to count
min. will appear on the screen, foldown from the number of minutes selected.
---
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
min. appears.
17
Adjusting
Auto Colour Control
To initialize values (reset to default settings), select the Normal option.
When adjusting color temperature options (red, green, or blue) manually, CSM is
-
-
1. Press the MENU button and then
2. Press the
Γ
button and then
button to select the
use Δ / Ε
use Δ / Ε
button to select Colour
Special
automatically changed
to User.
Special
menu.
Language
Temp..
OSD Rotate
Orbiter
3. Press the Γ button and then
use Δ / Ε
button to select CSM.
4. Press the Γ button and then
use Δ / Ε
button to select the desired colour
White Wash
Colour
Temp.
To Set
Γ
Set ID
tempera-
ture.
?
Each press of Δ
/ Ε
button
Normal
changes
the
screen
Cool
display
as
shown.
Warm
User
Colour
Temp.
CSM
Manual Colour
You
-
can
Temperature
adjust red,
green,
or
Control
Normal
Γ
Red
Cool
Green
Warm
Blue
User
(User option)
blue to any colour
temperature you prefer.
Special
1. Press the MENU button and then
use Δ / Ε
button to select the SPECIAL
menu.
Language
2. Press the Γ
button and then
use Δ / Ε
button to select Colour
3. Press the Γ button and then
use Δ / Ε
button to select
OSD Rotate
Temp..
Orbiter
White Wash
a
colour.
Colour
Temp.
Γ
Set ID
4. Use the Φ
/ Γ
button to make
appropriate adjustments.
5. Press the MENU button.
The
?
adjustment
range of Red, Green and Blue is -10~+10.
Child lock
-
-
The monitor
can
This feature
can
be set up so that it can only be used with the remote control.
be used to prevent unauthorized viewing.
1. Press the CHILD LOCK button.
?
Each press of the CHILD LOCK button
On
?
-
-
You
can
or
programmed
Off in the
screen
display
as
shown below.
menu.
to remember which
option
it
was
last set to
even
if you turn the monitor off.
'On', if the monitor is turned off with the remote control, press the INPUT SELECT button on the
monitor or POWER, INPUT SELECT on the remote control.
With the Child lock 'On', the display
Child lock appears on the screen if any button on the front panel is
pressed.
18
Special
In Child lock
'
-
the
Off
also select On
This Monitor is
changes
'
To Set
Screen Menu
Auto
-
-
mode
Adjustment (RGB1 (PC)
Options
only)
Automatically adjusts picture position and minimizes image shaking.
Although the image is still not correct, your Monitor is functioning properly
1. Press the AUTO CONFIG. button to
?
If the
position
of the
image
Auto
run
configure.
try Auto adjustment again.
picture needs to be adjusted more after Auto adjustment
manually adjust the image position and Phase.
-
You
can
adjustment.
is still not correct,
2. If
Adjusting
but needs further
in RGB1
mode, you
(480p)
RGB1(PC).
can
Horizontal/ Vertical Position
only adjust V-Position/H-Position
1. Press the MENU button and then
2. Press the Γ button and then
3. Press the Γ button and then
in COMPONENT
button to select the SCREEN
use Δ / Ε
button to select Screen
use Δ / Ε
or
adj..
button to select V-Position
use Δ / Ε
Screen
menu.
or
Screen
Γ
adj.
To Set
VGA Mode
ARC
H-Position.
PIP/DW
Zoom
4. Press the Γ button and then
zontal
?
The
?
The
or
vertical
adjustment
adjustment
on
Φ / Γ
button to
adjust
until you
get
desired hori-
range of V-Position is -50~+50.
range of H-Position is -100~+100.
If you install the monitor
Position may change.
Based
the
position.
?
?
use
the PC
vertically
resolution,
the
the
on
wall, the adjustment range of V-Position/H-
adjustment
range of V-Position/H-Position may
adj.
configure
[V-Position]
0
Γ
Phase
Based
have
Auto
[H-Position]
change.
?
Screen
on input signal, the position of the picture may not change
adjusted the horizontal or vertical position with this function.
even
though
you
Reset
5. Press the MENU button.
Picture Phase
-
If the picture
manually.
mode
Adjustments (RGB1 (PC)
isn't clear after auto
adjustment
1. Press the MENU button and then
and
use Δ / Ε
only)
especially
if characters
are
button to select the SCREEN
still
jittery, adjust
the
picture phase
menu.
Screen
2. Press the Γ button and then
use Δ / Ε
3. Press the Γ button and then
use Δ / Ε
4. Press the Γ button and then
use
button to select Screen
adj..
button to select Phase.
Auto
[H-Position]
Phase
?
The
adjustment
the Φ
range of Phase is 0
/ Γ
~
button to
adjust phase.
adj.
configure
[V-Position]
Γ
30
Reset
63.
5. Press the MENU button.
19
Initializing (Reset
To initialize the
-
Selecting
-
-
To
see a
When
At this
to
original factory value)
adjusted value,
Wide VGA mode
normal
picture,
select Reset with the Δ
(RGB1,
RGB2
button and then press the Γ button.
mode
only)
match the resolution of RGB mode and selection of VGA mode.
or 848x480, the
time, Twin picture doesn't work.
selecting
[PC]
/ Ε
852x480
1. Press the MENU button and then
2. Press the Γ button and then
3. Press the Γ button and then
screen
use Δ / Ε
use Δ / Ε
use Δ / Ε
is
to 16:9
changed
aspect ratio automatically.
button to select the SCREEN
Screen
menu.
button to select VGA Mode.
Screen
adj.
VGA Mode
button to select the desired VGA resolution.
Γ
640x480
ARC
848x480
PIP/DW
852x480
Zoom
4. Press the MENU button.
Screen
-
Adjustments (Video (or AV1, AV2)
Use this function to correct
jittering
or
1. Press the MENU button and then
2. Press the Γ button and then
3. Press the
Γ
button and then
?
Select the VCR
?
Select the
and S-Video mode
picture instability
use
use Δ / Ε
use Δ / Ε
Δ / Ε
while
viewing
only)
a
video
button to select the SCREEN
button to select Screen
tape.
Screen
menu.
Screen
adj..
adj.
Γ
TV
VCR
YNR
ARC
button to select TV or VCR.
PIP/DW
Zoom
option if watching a VCR.
TV option for other equipment.(Except VCR)
4. Press the MENU button.
Luminance Noise Reduction
-
To reduce the
picture
(Video (or AV1, AV2),
noise which may appear
1. Press the MENU button and then
2. Press the Γ button and then
use Δ / Ε
use Δ / Ε
on
the
S-Video and
screen
Component
during watching
button to select the SCREEN
button to select YNR.
480i/576i mode
the TV in
menu.
a
weak
signal
only)
area.
Screen
Screen
YNR
ARC
3. Press the Γ button and then
use Δ / Ε
button to select On
or
Off.
PIP/DW
Zoom
4. Press the MENU button.
20
adj.
Γ
On
Off
Screen Menu
Setting
-
-
-
Picture Format
You
are
You
are
available to 4:3 and 16:9 in RGB1 and RGB2
1. Press the ARC button to select
a
desired
picture
ARC
Split
Φ
ARC
Γ
16:9
Component.
format.
Each press of ARC button or Φ / Γ button changes the screen
You can also select 16:9, 4:3 or Zoom in the Screen menu.
?
-
(PC).
available to 16:9, 4:3 and Zoom in Video (or AV1, AV2), S-Video and
If 4:3 is on the screen for a long time, that fixed image may remain visible.
?
-
Options
Φ
display
as
shown below.
ARC
Γ
4:3
Φ
Zoom
Γ
Zoom
This is the function to
It's available to
use
enlarge
the
screen
this function in every
with
ration.
regular
input
source.
1. Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
1
2
4
5
changes
the
screen
display
as
shown below.
123
456
?
789
Press the number button to select the section you
In
case
of
If you choose
enlarge.
choosing
No.5, the
5 section is
the No.5
enlarged.
The 5 section is
a
full
changed
to
screen.
123
456
789
Picture Size Zoom
When
?
enlarging
(Component,
or
reducing
the
Video
picture,
1. Press the ZOOM+/ZOOM- button to
?The
2.
adjustment
Adjust
the main
S-Video mode
(or AV1, AV2),
the
enlarge
screen
or
may be
reduce the
display
picture
unnatural
only)
picture.
size.
range of Zoom is 0~20.
picture position
Zoom:
with the
Δ / Ε / Φ / Γ
buttons in
enlarged picture
mode.
0
Δ
Φ
Γ
Ε
21
PIP
-
(Picture-in-Picture) Feature
PIP lets you view 2 different inputs (sources)
source will show a smaller inset image.
on
your monitor
screen
at the
same
time. One
will be
source
large,
and the
other
-
-
When you select PC for main picture in PIP, you can watch Video (or AV1, AV2), S-Video or
If you turn on PIP while viewing Component, Video (or AV1, AV2) or S-Video, these sources
source
-
and main
If PIP doesn't
picture
is
source
changed
to PC
Component 480i for sub picture.
are changed to sub picture input
(RGB1, RGB2).
work, select PC (RGB1, RGB2) for main picture in PIP and then check it whether PC signal input into the
monitor.
Watching
PIP
(RGB1,
RGB2 mode
Press the PIP button to show the sub
?
Each press of PIP button
PIP
Φ
PIP
Main Picture
Selecting
a
(S)
or Φ / Γ
only)
picture.
button
?
the
screen
PIP
Γ
Φ
display
PIP
(L)
as
shown below.
PIP
Γ
Φ
Off
Γ
Sub Picture
Input Signal
Source for the PIP
Press the PIP INPUT button to select the
the sub
changes
input
Using
source
for
picture.
picture
Still Function
1. Press the PIP STILL button in the PIP mode.
?
Each press of PIP INPUT button or Φ / Γ button
changes the screen display as shown below.
Sub
In PIP
or
TWIN PICTURE
modes, the sub (inset) pic-
ture is frozen.
?
Frozen
picture
is released
automatically
after about 10
minutes.
Video
or
S-Video
(AV1)
?
If still
picture is on the screen for more than 5 minutes,
image becomes dark. If another function is activated, normal screen brightness is restored.
the
Component or (AV2)
2. To return to normal
ton
Selecting
PIP Sound
Moving
Options
Press the SOUND SELECT button to select main
image
sound
sound
(Sound(M))
(Sound(S)).
?
or
PIP
(inset
image)
Each press of SOUND SELECT button or Φ / Γ button
the screen display as shown below.
Sound(M)
22
Sound(S)
press the PIP STILL but-
the PIP
Press the PIP POSITION button in the PIP mode.
?
Each press of the PIP POSITION button will
sub
changes
viewing,
again.
picture
to
a
different
clockwise direction.
position
on
the
move
screen
in
the
a
Twin Picture
-
As the
same
-
-
name
suggests,
time. Each
Setup Options
this mode
source
When you select PC for
sub picture.
splits the screen into 2, allowing 2 sources to be shown on the
given half the screen.
main picture in twin picture, you can watch Video (or AV1, AV2), S-Video
monitor
screen
at the
is
or
Component
480i for
If you turn
on twin picture while viewing Component, Video (or AV1, AV2) or S-Video, these sources are changed to sub picinput source and main picture source is changed to PC (RGB1, RGB2).
If twin picture doesn't work, select PC (RGB1, RGB2) for main picture in twin picture and then check it whether PC signal
input into the monitor.
In wide VGA (848x480, 852x480), twin picture mode is not available.
ture
-
-
Watching
Twin Picture
Use the TWIN PICTURE button.
?
Each press of the TWIN PICTURE button
DWΦ
Selecting
a
DW1
Input Signal
or
cycles through
DW2
the
screen
displays
DWΦ
Γ
shown below.
Γ
Off
Source for the Twin Picture
Each press of PIP INPUT button
Video
button
DWΦ
Γ
Press the PIP INPUT button to select the
?
or Φ / Γ
input
or Φ / Γ
source
button
for the sub
changes
the
picture.
screen
display
as
shown below.
S-Video
(AV1)
Component or (AV2)
Selecting
Twin Picture Sound
Options
Using
Press the SOUND SELECT button to select main
image
sound
sound
(Sound(M))
(Sound(S)).
?
or
PIP
(inset
image)
picture
Still Function
?
In PIP
or
TWIN PICTURE
modes, the sub (inset) pic-
ture is frozen.
Each press of SOUND SELECT button or Φ / Γ button
changes the screen display as shown below.
?
Sound(S)
Frozen
picture
is released
automatically
after about 10
minutes.
?
Sound(M)
Sub
1. Press the PIP STILL button in the PIP mode.
If still
picture is on the screen for more than 5 minutes,
image becomes dark. If another function is activated, normal screen brightness is restored.
the
2. To return to normal
ton
viewing,
press the PIP STILL but-
again.
23
External Control Device
Connect the RS-232C
-
to
input jack
and control the Monitor's functions
Connect the serial
-
Type
of connector; D-Sub
No.
Pin
1
No connection
are
9-pin
(such
as a
computer
or an
A/V control
system)
not
to the RS-232C
supplied
jack
on
the Monitor back
panel.
with the Monitor.
male
1
name
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
5
(Receive data)
(Transmit data)
(DTE side ready)
9
(DCE side ready)
(Ready to send)
(Clear to send)
7
RTS
8
CTS
9
No Connection
RS-232C
external control device
externally.
port of the control device
RS-232C connection cables
-
an
Setup
6
configurations
7-wire
(Standard
3-wire
configuration
(Not standard)
configuration
RS-232C cable)
PC
PDP
PC
PDP
TXD
RXD
3
TXD
RXD
2
3
TXD
2
RXD
TXD
3
2
RXD
5
GND
GND
5
5
GND
2354678
GND
DTR
DSR
RTS
CTS
D-Sub 9
6
DSR
DTR
4
4
DTR
4
DTR
DSR
6
6
DSR
8
CTS
RTS
7
7
RTS
7
RTS
CTS
8
8
CTS
D-Sub 9
D-Sub 9
D-Sub 9
Set ID
-
-
Use this function to
specify a monitor ID number.
Mapping 1'. See page 28.
Refer to 'Real Data
1. Press the MENU button and then
2. Press the Γ button and then
use
the Δ
use Δ / Ε
/ Ε
button to select the SPECIAL
menu.
button to select Set ID.
Special
Language
OSD Rotate
Orbiter
3. Press the Γ button and then
use
Φ / Γ button to
adjust
Set ID to choose the desired
The
adjustment
range of Set ID is 1
99.
~
Communication Parameters
?
Baud rate
?
Data
?
*
24
:
115200
bps (UART)
length : 8
Parity : None
bits
Use
(reverse)
a
crossed
Colour
Set ID
monitor ID number.
?
White Wash
?Stopbit:1bit
?
cable.
Communication code
:
ASCII code
Temp.
Γ
1
OK Acknowledgement
Command Reference List
COMMAND 1
COMMAND 2
DATA
(Hexadecimal)
01. Power
k
a
0~1
Input Select
Aspect Ratio
k
b
0~4
k
c
0~2
04. Screen Mute
k
d
0~1
02.
03.
05. Volume Mute
k
e
0~1
06. Volume Control
k
f
0~64
07. Contrast
k
g
0~64
08.
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
k
h
0~64
The Monitor transmits ACK
(acknowledgement)
k
i
0~64
this format when
abnormal data from
10. Tint
k
j
0~64
non-viable functions
11.
k
k
0~64
12. OSD select
k
l
0~1
13. External control mode
k
m
0~1
14. PIP/Twin
k
n
0~4
Sharpness
picture (DW)
15. PIP sound select
k
p
0~1
16. PIP
k
q
0~3
17. Treble
k
r
0~64
18. Bass
k
s
0~64
position
*
Data
1:
Illegal
2: not
or
communication
Code
more
time
(Command2:a)
19. Balance
k
t
0~64
k
u
0~3
Transmission
k
v
0~64
[k][a][ ][Set ID][ ][Data][Cr]
k
w
0~64
k
$
0~64
adjustment
22. Green
adjustment
23. Blue
adjustment
input source
Data
0
Power Off
:
1:PowerOn
k
y
0~3
Acknowledgement
25. Abnormal State
k
z
0~7
[a][ ][Set ID][ ][OK][Data][x]
26. Orbiter
j
j
p
0~1
q
0~1
24. PIP
27. White Wash
*
on
errors.
20. Colour
21. Red
based
support function
3: Wait
01. Power
receiving
Γ To control Power On/Off of the Monitor.
temperature (CSM)
on
the data is data write
09. Colour
Brightness
based
time, if the
Γ To show Power On/Off.
Transmission
When
setting
the 26 and 27,
a menu
doesn't
display
on screen.
[k][a][ ][Set ID][ ][FF][Cr]
Data
0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Transmission /
Receiving
Protocol
*
Transmission
In like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feed back presents
status about each function.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
[Command 1]
:
First command to control PDP set.
(jork)
*
*
[Command 2]
[Set ID]
:
Second command to control PDP set.
:
You
can
adjust
the set ID to choose
desired monitor ID number in
menu.
See
special
previous page.
Adjustment range is 1
When selecting Set ID
99.
~
'0', every
connected PDP set is controlled.
Set ID is indicated
on
*
[DATA]
:
decimal
(1~99)on
(0x0~0x63)
transmission/receiving protocol.
menu
and
as
as
Hexa decimal
To transmit command data.
Transmit 'FF' data to read status of
command.
*
[Cr]
:
Carriage
Return
02.
Input
Select
Γ To select input
You
can
(Command2:b)
source
also select
SELECT button
on
an
for the Monitor.
input
using
source
the INPUT
the Monitor's remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data
0
:RGB1
1
:
2
:
Component (or AV1)
Video (or AV2)
S-Video
3
:
4
:RGB2
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
ASCII code '0x0D'
*[]
:
ASCII code
'space (0x20)'
25
03.
Aspect
Ratio
Γ To adjust the
07. Contrast
(Command2:c)
format. (Main picture format)
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
You
screen
Γ To adjust
You
also
can
screen menu.
Data
:
1
:
2
:
Wide
contrast.
adjust
contrast in the
picture
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
0
also
can
[k][g][ ][Set ID][ ][Data][Cr]
Transmission
Data
(Command2:g)
screen
Min:0~Max:64
*
(16:9)
Normal screen (4:3)
Full screen (Zoom)
Refer to 'Real data
mapping1'.
See page 28.
screen
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Acknowledgement
08.
[c][ ][Set ID][ ][OK][Data][x]
*
Using
the PC
aspect
input,
you select either 16:9
or
4:3
screen
Brightness (Command2:h)
Γ To adjust
You
can
brightness.
adjust brightness
screen
also
ratio.
in the
picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
04. Screen Mute
(Command2:d)
Γ To select
mute on/off.
screen
Data
Transmission
Refer to 'Real data
mapping1'.
See page 28.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
[k][d][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
0
:
Screen mute off
1
:
Screen mute
(Picture on)
(Picture off)
on
09. Colour
(Command2:i)
Γ To adjust the
Acknowledgement
You
[d][ ][Set ID][ ][OK][Data][x]
can
also
screen
adjust
colour.
colour in the
picture
menu.
Transmission
05. Volume Mute
[k][i][ ][Set ID][ ][Data][Cr]
(Command2:e)
Data
Γ To control volume
You
can
also
mute on/off.
adjust
mute
using
Min:0~Max:64
*
the MUTE button
Refer to 'Real data
on
remote control.
Transmission
mapping1'.
See page 28.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
[k][e][ ][Set ID][ ][Data][Cr]
Data
0
1
Volume mute
:
(Volume off)
(Volume on)
on
Volume mute off
:
10. Tint
(Command2:j)
Γ To adjust the
You
can
also
Acknowledgement
screen
adjust
tint.
tint in the
picture
menu.
Transmission
[e][ ][Set ID][ ][OK][Data][x]
[k][j][ ][Set ID][ ][Data][Cr]
Data
06. Volume Control
(Command2:f)
Γ To adjust volume.
You
on
can
also
adjust
Red:0~Green:64
*
Refer to 'Real data
remote control.
[j][ ][Set ID][ ][OK][Data][x]
11.
[k][f][ ][Set ID][ ][Data][Cr]
Γ To adjust the
Refer to 'Real data
Sharpness (Command2:k)
You
Min:0~Max:64
*
mapping1'.
Acknowledgement
See page 28.
[f][ ][Set ID][ ][OK][Data][x]
can
also
sharpness.
adjust sharpness in
screen
the
picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1'.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
26
See page 28.
Acknowledgement
volume with the volume buttons
Transmission
Data
mapping1'.
See page 28.
12. OSD Select
16. PIP Position
(Command2:l)
Γ To select OSD (On Screen Display) on/off when
(Command2:q)
Γ To select sub picture position for PIP.
con-
You
trolling remotely.
also
can
adjust
POSITION button
Transmission
the sub
picture position using
the remote control
or
in the
PIP
screen
menu.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0
on
:OSDoff
[k][q][ ][Set ID][ ][Data][Cr]
1:OSDon
Data
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
on screen
on screen
on screen
up
on screen
Acknowledgement
13. External Control Mode
[q][ ][Set ID][ ][OK][Data][x]
(Command2:m)
Γ To lock the front panel controls on the monitor and remote
control. When setting this mode, only control the monitor
with RS-232C.
17. Treble
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
You
Lock off
1:Lockon
you're
not
using
also
adjust
treble in the sound
menu.
[k][r][ ][Set ID][ ][Data][Cr]
[m][ ][Set ID][ ][OK][Data][x]
If
can
Transmission
Acknowledgement
*
(Command2:r)
Γ To adjust treble.
Data
the remote
When main power is
released.
Min:0~Max:64
*
this mode.
control,
on/off, external control lock is
use
Refer to 'Real data
mapping1'.
See page 28.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
14. PIP / Twin
(DW) (Command2:n)
18. Bass
Γ To control the PIP (Picture In picture)/Twin picture.
You
can
Twin
also control the PIP/TWIN
picture
button
on
picture using
the remote control
or
the PIP
in the
or
screen
menu.
(Command2:s)
Γ To adjust bass.
You
can
also
adjust
bass in the sound
menu.
Transmission
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
[k][n][ ][Set ID][ ][Data][Cr]
Data
Data
0: PIP/DW off
3: DW2
1: PIP
4: PIP
(S)
Min:0~Max:64
*
(L)
Refer to 'Real data
mapping1'.
See page 28.
Acknowledgement
2: DW1
[s][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
19. Balance
15. PIP Sound Select
Γ To select main
You
can
ture
using
the
also
or
Γ To adjust balance.
(Command2:p)
sub sound for PIP/Twin
adjust
main
or
on
You
picture.
sub sound for PIP/Twin
PIP SOUND button
screen menu.
the remote control
picor
Data
0: Main
1: Sub
image sound
image sound
also
adjust
balance in the sound
menu.
in
[k][t][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
*
[k][p][ ][Set ID][ ][Data][Cr]
can
Transmission
Data
Transmission
(Command2:t)
Refer to 'Real data
mapping1'.
See page 28.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
27
20. Colour
25. Abnormal State
Temperature (Command2:u)
Γ To recognize
Γ To adjust colour temperature.
You
can
also
adjust
CSM in the
special
menu.
abnormal state.
an
Transmission
Transmission
[k][z][ ][Set ID][ ][FF][Cr]
[k][u][ ][Set ID][ ][Data][Cr]
Data
(Command2:z)
0: Normal
Data
1: Cool
2: Warm
0: Normal
(Power on and signal)
signal (Power on)
Turn the monitor off by remote control
Turn the monitor off by sleep time function
Turn the monitor off by RS-232C function
1: No
3: User
2:
Acknowledgement
3:
[u][ ][Set ID][ ][OK][Data][x]
4:
5: 5V down
6: AC down
21. Red
Adjustment (Command2:v)
7: Fan Alam
Γ To adjust red in colour temperature.
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Transmission
*
[k][v][ ][Set ID][ ][Data][Cr]
Data
This function is "read
only".
Min:0~Max:64
*
Refer to 'Real data
mapping
26. Orbiter
2'. See page 28.
Acknowledgement
(Command2:p)
Γ To control the orbiter function on/off. You
[v][ ][Set ID][ ][OK][Data][x]
orbiter in
adjust
special
can
also
menu.
Transmission
22. Green
Adjustment (Command2:w)
[j][p][ ][Set ID][ ][Data][Cr]
Γ To adjust green in colour temperature.
Data
Transmission
Refer to 'Real data
Orbiter off
:
Orbiter
on
[p][ ][Set ID][ ][OK][Data][x]
Min:0~Max:64
*
:
1
Acknowledgement
[k][w][ ][Set ID][ ][Data][Cr]
Data
0
mapping
2'. See page 28.
Acknowledgement
27. White Wash
[w][ ][Set ID][ ][OK][Data][x]
Γ To control the white wash function on/off. You
White Wash in
adjust
23. Blue
Adjustment (Command2:$)
(Command2:q)
special
[j][q][ ][Set ID][ ][Data][Cr]
Transmission
Data 0
:
White Wash off
1
:
White Wash
[k][$][ ][Set ID][ ][Data][Cr]
Refer to 'Real data
on
Acknowledgement
Min:0~Max:64
*
also
Transmission
Γ To adjust blue in colour temperature.
Data
can
menu.
mapping
2'.
See page 28.
[q][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
24. PIP
Input
Select
Γ To select input
source
ture mode. You
picture using
(Command2:y)
can
for sub
also
picture
adjust input
PIP INPUT button
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data
in PIP/Twin
source
pic-
Real data
mapping
2: VIDEO
1
remote control.
*
Real data
0
:Step0
A
:Step10(SetID10)
0:-10
A:-8
F :Step15(SetID15)
10:Step16(SetID16)
2D: -1
5:-9
for sub
32: 0
37: +1
0: RGB1
1: COMPONENT
(or AV1)
(or AV2)
3: S-VIDEO
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
28
on
*
64
:
Step
100
5F: +9
64: +10
mapping
2
IR Code
(NEC Format)
How to connect
Γ
Connect your wired remote control to the Remote port
Set the CONTROL LOCK to 'ON' on the Monitor back
Remote Control IR Code
on
the Monitor.
panel
to
operate Monitor with wired
remote control.
(NEC Format)
Γ Output waveform
Single pulse,
modulated with 37.917KHz
at 455KHz
signal
TC
Carrier
frequency
FCAR
1/TC
Duty
T1
=
ratio
=
fOSC/12
=
T1/TC
1/3
=
Γ Configuration of frame
?
1st frame
Lead
Low
High
code
custom code
custom code
Data code
Data code
C0 C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?
Repeat
frame
Repeat
code
Tf
Γ Lead code
9ms
4.5
ms
0.55
Γ Repeat code
ms
9ms
2.25
ms
Γ Bit description
?
Bit "0"
?
0.56
0.56
1.12
Γ Frame interval
:
Bit "1"
ms
ms
2.24
ms
ms
Tf
The waveform is transmitted
Tf
as
long
as a
key
is
depressed.
Tf
Tf=108ms @455KHz
29
Code
Note
00H
UP
(Δ)
R/C Button
01H
DOWN
R/C Button
03H
(Ε)
VOL+ (Γ)
VOL- (Φ)
08H
POWER
R/C Button
C4H
POWER ON
Discrete IR Code
C5H
POWER OFF
Discrete IR
09H
MUTE
R/C Button
10H
Number
11H
Number
12H
Number
13H
Number
14H
Number
15H
Number
16H
Number
17H
Number
18H
Number
19H
Number
0BH
INPUT SELECT
R/C Button
98H
RGB 1
Discrete IR Code
C6H
RGB 2
5AH
VIDEO
Discrete
51H
S-VIDEO
Discrete
BFH
COMPONENT
Discrete
0EH
SLEEP
R/C Button
3EH
CHILD LOCK
R/C Button
40H
ZOOM
R/C Button
41H
ZOOM
43H
MENU
R/C Button
44H
OK
R/C Button
4DH
PSM
R/C Button
52H
SSM
R/C Button
60H
PIP
R/C Button
61H
PIP INPUT
R/C Button
62H
PIP POSITION
R/C Button
65H
PIP STILL
R/C Button
6BH
TWIN PICTURE
R/C Button
6CH
SOUND SELECT
R/C Button
7BH
Split
79H
ARC
76H
ARC
02H
30
Function
(Hexa)
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
R/C Button
R/C Button
0
R/C Button
1
R/C Button
2
R/C Button
3
R/C Button
4
R/C Button
5
R/C Button
6
R/C Button
7
R/C Button
8
R/C Button
9
R/C Button
(DVI input)
+
-
( )
Zoom
Discrete
(Input
(Input
(Input
(Input
77H
ARC
AFH
ARC
92H
AUTO CONFIG.
(Input RGB1 Selection)
Selection)
VIDEO Selection)
S-VIDEO Selection)
COMPONENT Selection)
RGB2
R/C Button
R/C Button
R/C
(4:3)
(16:9)
(ZOOM)
(Power On/Off)
(Only Power On)
Code (Only Power Off)
Button(4:3/16:9/Zoom Mode Selection)
IR Code (Only 4:3 mode)
Discrete IR Code (Only 16:9 mode)
Discrete IR Code (Only ZOOM mode)
Discrete
R/C Button
Troubleshooting Checklist
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
?
Plug
on.
No sound
another
power cord
Sound muted? Press MUTE button.
?
Check to
?
?
?
Picture appears slowly,
after switching on
Check to
if there is any
see
to
Install
new
No
batteries.
as
the
(Refer
to
image
is muted
Select Colour in the Picture
one
of the
to
during
the
inside the monitor
startup process of the moni-
menu
still
(Γ)
button.
certain distance between the Monitor and the VCR.
Activate any function to restore the
a
and press the VOLUME
p.15)
?
picture
is
on
the
screen
for
?
Check for local interference such
?
Adjust
?
A
speakers
Unusual sound from
polarities.
centre, if the picture has not appeared after
brightness
more
as an
than 5
Balance in the Sound
change
in ambient
at the time of
humidity
switching
off
menu.
or
or on
of the
(Refer
to
picture.
minutes, the
electrical
picture shaking
output from
and the
p.11)
Keep
(If
or
installed with the correct
are
?
picture
Horizontal/vertical bars
Display
five minutes.
Poor colour
Poor
between the Plasma
object
obstruction.
p.11)
This is normal
(Refer
or
causing
if the batteries
see
(Refer
button.
(Γ)
tor. Please contact your service
?
or
in.
?
doesn't work
No
plugged
Press the VOLUME
remote control
The remote control
power cord into the wall outlet where the Monitor's
?
Picture OK &
No sound
product's
was
appliance
screen
or
gets dark.)
power tool.
p.16)
temperature may result in
an
unusual noise
of the monitor and does not indicate
a
fault
with the monitor.
31
NOTES
32
NOTES
33
NOTES
34
Product
Specifications
MODEL
MT-42PZ40V/B/R/S
MT-42PZ43V/B/R/S
MT-42PZ41V/B/R/S
MZ-42PZ42V/B/R/S
MT-42PZ41M/B/R/S
MZ-42PZ43V/B/R/S
MT-42PZ42V/B/R/S
Width
(inches
/
mm)
40.7 / 1033
Height (inches
/
mm)
24.5 / 622
Depth (inches
/
mm)
3.2/81
/
75/34
Weight (pounds
Power
kg)
AC100-240V, 50/60Hz
requirement
Resolution
852
Colour
32
specifications
shown above may be
(Dot)
~
104°F
(0
40°C)
~
Less than 80%
Operating Humidity Range
The
480
16,770,000 (256 steps of each R, G and B)
Operating Temperature Range
?
x
changed
without notice for
quality improvement.
35
Download PDF