LG | MT-40PA10 | LG MT-40PA10 Owner’s Manual

Please read this owner's manual
operating
carefully
before
the Monitor.
Retain it for future reference.
Record model number and serial number of the
Monitor.
See the label attached
on
the back of the Monitor
and quote this information to your dealer when you
require service.
Model number
Serial number
:
:
ON/OFF
PLASMONITR
MT-40PA10/A/B/G/K/S
MZ-40PA10/A/B/G/K/S
OWNER'S MANUAL
INPUT VOLUME
SELECT
What is
a
Plasma
Display
?
If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent
substance. At this moment, light is emitted. A Plasma Display is a next generation flat Display using
this phenomenon.
160°
-
Wide
angle range
of vision
A Plasma Display provides more than 160°
without distortion from any direction.
Easy
angle range
of vision
can
get
a
picture
same
class
products
so
that you
can
screen
The screen of
theater.
Plasma
a
Display
Multimedia Plasma
A Plasma
Display
can
explanation
is 40"
so
that you
can
get vivid experience
as
if you
are
in
a
Display
be connected with
ference, game, internet and
The
that you
installation
A Plasma Display is much lighter and smaller than other
install the Plasma Display at the desired place.
Big
so
a
computer
so
that you
can use
it
as a screen
for
con-
so on.
about colored dots may be
present
on
PDP
screen
The PDP which is the display device of this product is composed of 0.9 to 2.2 million cells and a
few cell defects can occur in the manufacture of the PDP. Several coloured dots visible on the
screen would be acceptable, in line with other PDP manufacturers and would not mean that the
PDP is faulty. We hope you will understand that the product which corresponds to this standard
is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
WARNING
This is Class B
in which
case
product.
the
user
In
a
domestic environment this
may be
required
to take
product may
adequate measures.
cause
radio interference
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
When connecting the PDP tuner with its
exclusive cable, most functions work with the
tuner and the PDP only functions as monitor.
(For further information, refer to the PDP Tuner
Guide)
ON/OFF
INPUT
SELECT
VOLUME
Contents
First step
Safety Instructions ....................................................4
Composition
Controls of the Monitor .............................................8
Controls of the remote control ................................12
Installation of the Monitor .......................................14
Connection
Watching VCR ........................................................16
Watching Cable TV.................................................17
Watching external AV source..................................18
Watching DVD ........................................................19
Connecting PC .......................................................20
Function checking in PC mode ..............................22
Adjusting in PC mode .............................................23
Using the remote control ........................................26
Basic function
Turning on the Monitor ...........................................27
Selecting the on screen language ..........................28
Function checking...................................................29
Picture
Picture adjustment..................................................30
Picture format .........................................................31
Sound
Sound adjustment...................................................32
function
Child lock ................................................................33
Auto sleep...............................................................34
Sleep timer .............................................................35
Special
Others
Troubleshooting check list ......................................36
Product specifications.............................................39
Safety
-
Instructions
Use the Monitor at the place lower than the altitude of 6562 feet
the best quality of picture and sound.
WARNING
Indorstali
This may
cause a
to
get
NOTES
Do not place the Monitor in
direct sunlight or near heat
sources such as heat registers,
stove and so on.
-
(2000m)
This plasma
be mounted
display is designed
horizontally (wide
to
viewing).
fire.
WARNING
Do not
the Monitor in
such as a bathany place where it
use
damp place
room or
OutdorInsali
is
-
likely
to
get
wet.
Bend antenna cable between
inside and outside building to prevent rain from flowing in.
-
This may cause a fire or could
give an electric shock.
WARNING
NOTES
Earth wire should be connected.
-
-
Power
-
If the earth wire is not connected,
there is possible a danger of electric
shock caused by the current leakage.
If grounding methods are not possible, a separate circuit breaker should
be employed and installed by a qualified electrician.
Do not connect ground to telephone
wires, lightning rods or gas pipe.
Short-circuit
breaker
4
This may cause water damaged inside
the Monitor and could give an electric
shock.
Never touch the power
with a wet hand
-
This may
cause an
plug
electric shock.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
below.
as
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
or
and
even
damage
First ep
death.
of the
product.
Take
care
of
danger that may happen
under
specific condition.
Compsiton
NOTES
Disconnect from the mains
and remove all connections
before moving.
Do not place the Monitor in a
built-in installation such as a
bookcase or rack.
Ventilation
-
required.
When
installing
the Monitor
on a
table, be careful not to place the
edge
of its stand.
This may cause the Monitor to fall,
causing serious injury to a child or
adult, and serious damage to the
Monitor.
-
ConectiBasfu
NOTES
Do not place an outside antenna in
the vicinity of overhead power lines
other electric light or power circuits.
-
This may
cause an
electric shock.
or
There should be enough distance between an
outside antenna and power lines to keep the former from touching the latter even when the
antenna falls.
-
Picture
This may cause
an electric shock.
Sound
NOTES
Do not pull the cord but the
when unplugging.
plug
-
This may
cause a
fire.
Ensure the power cord
doesn't trail across any hot
objects like a heater.
-
This may cause
tric shock.
a
fire
or an
elec-
Specialfunto
Do not plug when the power
cord or the plug is damaged
or the connecting part of the
power outlet is loose.
-
This may cause a fire
an electric shock.
or
Others
5
Safety
Instructions
WARNING
Do not placing anything containing liquid on top of the
Monitor.
-
Using
Do not insert any
the exhaust vent.
-
This may cause a fire or could
give an electric shock.
object
This may cause a fire
an electric shock.
or
into
could
give
WARNING
Do not use water the Monitor
while cleaning.
-
Cleanig
This may cause damaged the
Monitor or could give an electric
shock.
In case of smoke or strange
smell from the Monitor, switch it
off ,unplug it from the wall outlet
and contact your dealer or service center.
-
This may cause a fire
an electric shock.
or
could
give
WARNING
Do not attempt to service
the Monitor yourself.
Contact your dealer or service center.
Others
6
-
This may cause damaged the
Monitor or could give an electric
shock.
During
unplug
a
lightning thunder,
the Monitor from the
wall outlet and don't touch an
antenna cable.
-
This may cause damaged the
Monitor or could give an
electric shock.
WARNING in U.K.
*
This set is
only
with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is
not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
supplied
WARNING
Do not place heavy
the Monitor.
Compsiton
NOTES
Dispose of used batteries
carefully to protect a child
from eating them.
objects
on
-
First ep
This may cause serious
a child or adult.
injury
to
-
In
case
to
see a
that it eats them, take it
doctor immediately.
When moving the Monitor
assembled with the
Speakers do not carry holding the Speakers.
-
This may
cause
the Monitor to
fall, causing serious injury
child or adult, and
to
ConectiBasfu
a
serious
damage
to the
Monitor.
NOTES
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners.
-
This may cause damaged the Monitor
an electric shock.
or
could
Contact the service center once a year to
clean the internal part of the Monitor.
-
Accumulated dust
can cause
Picture
mechanical failure.
give
Sound
NOTES
The distance between eyes
and the screen should be
about5~7timesaslongas
diagonal length of the
screen.
-
If not, eyes will strain.
Unplug the Monitor from the
wall outlet when it is left
unattended and unused for
long periods of time.
-
Accumulated dust may cause
fire or an electric shock from
deterioration or
electric leakage.
a
Only
use
teries.
-
the
specified
bat-
This make cause damaged the
remote control or could give an
electric shock.
Specialfunto
Others
7
Controls of the Monitor
<Front Panel>
ON/OFF
INPUT
SELECT
ON/OFF
VOLUME
MAIN POWER BUTTON
REMOTE CONTROL SENSOR
INPUT
SELECT
VOLUME
INPUT SELECT BUTTON
POWER/STANDBY INDICATOR
Illuminates red in standby
Illuminates green when the Monitor is switched
8
POWER BUTTON
on
VOLUME (Φ,Γ) BUTTON
First ep
Compsiton
<Back Panel>
EXTERNAL SPEAKER
(+)
R
()
()
L
AV INPUT
(8Ω)
R AUDIO L (MONO) VIDEO
(+)
COMPONENT
(480i/480p)
(DVD INPUT)
Y
PB
RGB-PC
INPUT(VGA/SVGA)
PR
AUDIO INPUT
R
RGB INPUT/CONTROL
ConectiBasfu
AC INPUT
L
Picture
EXTERNAL SPEAKER
(+)
R
()
()
L
AV INPUT
(8Ω)
(+)
R
AUDIO
L
(MONO) VIDEO
COMPONENT
(480i/480p)
(DVD INPUT)
Y
PB
RGB-PC
PR
EXTERNAL
AV INPUT /
SPEAKER (8Ω)
KNOBS
COMPONENT (480i/480p)
DVD INPUT SOCKETS
INPUT(VGA/SVGA)
AUDIO INPUT
R
RGB INPUT/CONTROL
Sound
AC INPUT
L
RGB-PC INPUT (VGA/SVGA) /
AUDIO INPUT /
RGB INPUT/CONTROL SOCKETS
POWER INPUT
SOCKET
This Monitor operates
on an AC mains supply,
the voltage is as indicated as inside back cover
of this manual. Never
apply DC power to the
Monitor.
9
Specialfunto
Others
Accessories
POWER
MULTIMEDIA
TV/AV
ARC
I/II
PIP
TEXT
PR-
PR+
SWAP
MENU
VOL
INPUT
PR
MUTE
OK
VOL
PR
1
4
7
PSM
POSTION
cable
pin
Mains cord
SLEEP
TV/VIDEO
MENU
ENTER
RT/RZ-BA10
10
?
FF
Remote control
Alkaline batteries
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
MULTIMEDIA
PLAY
REC
Extras
Optional
ON/OFF
P/STILL
LIST
1.5V
Owner's Manual
-
SSM
STILL
REVEAL
M
1.5V
LG TV
AS
mark
-
9
0
TIME
MIX
REW
3
6
8
SIZE
STOP
D-sub 15
2
5
STROBE/
VOL
for
quality improvement
without any notification
new
CH
(PDP Tuner)
AP-40WA20M series
(Tilt
wall
mounting bracket)
AP-40WA10 series
(Wall mounting bracket)
Optional
-
-
First ep
Extras
Optional extras can be changed or modified
optional extras can be added.
Contract your dealer for buying these items.
for
quality improvement
without any notification
AP-40CA10 series
AP-40FA10 series
(Ceiling mounting bracket)
(Floor type stand)
AP-40DA10 series
AP-40SA10 series
(Desktop stand)
(Speakers)
new
Compsiton
ConectiBasfu
Picture
Sound
AP-40SA10D series
AP-40SA10F series
(Speaker stand)
(Floor type speaker stand)
Specialfunto
Others
Video cables
Audio cables
11
Controls of the remote control
-
-
Some buttons on this remote control does function only when the Monitor is
nected with RT/RZ-BA10 (the PDP tuner).
When using the remote control aim it at the remote control sensor of the Monitor.
con-
POWER
POWER button
MULTIMEDIA
TV/AV
ARC
I/II
PIP
TEXT
MULTIMEDIA button
ARC button (Refer to
p.31)
No function
PR-
PR+
SWAP
INPUT
No function
MENU
PR
MUTE
MENU button
OK button
VOL
OK
VOL
VOLUME (Φ, Γ) buttons
PR
1
2
3
4
5
6
7
8
9
PSM
0
SSM
No function
PSM button (Refer to
p.30)
POSITION
STROBE/
STILL
SIZE
TIME
REVEAL
MIX
STOP
VCR buttons
controls
a
LG video cassette
recorder.
12
REW
SLEEP
M
P/STILL
PLAY
LIST
REC
FF
?
First ep
TV/AV button
on
Compsiton
the remote control
Each press of this button
the mode as below.
changes
TV/AV button
AV
No function
No function
RGB-PC
MUTE button
switches the sound
on or
MULTIMEDIA button
on
the remote control
Each press of this button
the mode as below.
Ε
/
Δ
ConectiBasfu
COMPONENT
off.
buttons
changes
RGB-PC
Picture
COMPONENT
SSM button (Refer to
p.32)
Sound
No function
SLEEP button (Refer to
p.35)
Specialfunto
Others
13
Installation of the Monitor
-
The Monitor
can
be installed in various ways such
desktop type,
To install
as
wall
The monitor
can
be installed
on
further information, refer to
(For
wall
mounting type,
mounting type
NOFF
?
as
etc..
the wall
'(Tilt)
MULTMDA
V/AV
NTR
MNU
VOL
CH
the picture above.
mounting bracket owner's manual'.)
as
wall
Tips
?
Install this monitor
only
in
a
location where
a.
(Wall
adequate
ventilation is available.
4inch
mount minimum
1.18inch
allowable clearances
for adequate ventilation)
4inch
4inch
4inch
14
First ep
To install
as
Compsiton
desktop type
INPUT
SELECT
ON/OFF
ConectiBasfu
VOLUME
Picture
?
The monitor
(For
can
be installed
on
further information, refer to
the desk
as
'Desktop
stand owner's
the
picture
Sound
above.
manual'.)
Specialfunto
b.
(Pedestal
4inch
mount minimum
1.18inch
allowable clearances for
adequate ventilation)
4inch
4inch
Others
2.36inch
15
Watching VCR
-
When
-
-
-
the Monitor with external
connecting
yellow, Audio(L)
EXTERNAL SPEAKER
(+) R ()
(+)
R
()
()
L
R
(+)
AUDIO
L
L
(8Ω)
(+)
Y
PB
COMPONENT
(480i/480p)
(DVDINPUT)
AVINPUT
R AUDIO L
<MONO>
VIDEO
Y
PB
RGB-PCINPUT(VGA/SVGA)
PR
AUDOINPUT
R
(R)
AUDIO
(L)
RGB INPUT/CONTROL
AC INPUT
L
RGB-PC
INPUT(VGA/SVGA)
PR
AUDIO INPUT
R
<Back
OUT
of the
for a long period of time. Typically a frozen still picCH label is present; the fixed image may remain visible on
(480i/480p)
(DVD INPUT)
(MONO) VIDEO
AUDIO(L/MONO) input
screen
a
COMPONENT
AV INPUT
(8Ω)
()
cable from the VCR to the
Back
S-VIDEO
connecting ports (Video
-
If you have a
Monitor.
Avoid having a fixed image remain on the
ture from a VCR, 16:9 picture format or if
the screen.
EXTERNAL SPEAKER
match the colours of
equipments,
white, Audio(R) red).
mono VCR, connect the audio
-
RGB INPUT/CONTROL
L
of the Monitor
panel
panel
of VCR>
VIDEO
IN
To watch VCR
1
2
Press TV/AV button on the remote control to select AV.
(Select AV if AV INPUT is connected.)
TV/AV
Insert a video tape into the VCR and press the PLAY
button on the VCR.
Tips
?
16
To prevent
picture noise, place
the VCR
more
than 50cm away from the Monitor.
Watching Cable
-
After subscribing for
cable TV.
a
First ep
TV
local cable TV station and
installing
a
converter you can watch
Compsiton
EXTERNAL SPEAKER
(+)
EXTERNAL SPEAKER
(+)
R
()
()
L
AV INPUT
(8Ω)
R
(+)
AUDIO
L
R
COMPONENT
(480i/480p)
(DVD INPUT)
AVINPUT
(8Ω)
() L (+)
()
RAUDIO L
VIDEO
<MONO>
Y
PB
RGB-PC
INPUT(VGA/SVGA)
COMPONENT
(480i/480p)
(DVD INPUT)
(MONO) VIDEO
Y
PB
Back
AUDIO INPUT
R
PR
RGBINPUT/CONTROL
AC INPUT
L
RGB-PC
INPUT(VGA/SVGA)
AUDIO INPUT
R
PR
panel
ConectiBasfu
RGB INPUT/CONTROL
L
of the Monitor
(UDI)VO
Picture
<Cable box>
TV
VCR
RF
Cable
Sound
To watch cable TV
1
2
Press TV/AV button
on
the remote control
to select AV.
(Select AV if AV INPUT is
Specialfunto
TV/AV
connected.)
Select your desired programme with the
remote control for cable box.
Others
Tips
?
For further information of cable TV, contact the local cable TV station.
17
Watching
-
When
of
connecting the
connecting ports.
external AV
Monitor with external
AVINPUT
EXTERNAL SPEAKER(8Ω)
(+)
EXTERNAL SPEAKER
(+)
R
()
()
L
AV INPUT
(8Ω)
(+)
R
AUDIO
L
R
()
()
L
(+)
R AUDO L<MONO> VDEO
COMPONENT
(480i/480p)
(DVDINPUT)
Y
PB
RGB-PC
INPUT(VGA/SVGA)
PR
COMPONENT
(480i/480p)
(DVD INPUT)
Y
(MONO) VIDEO
PB
equipments,
AUDIO NPUT
R
RGBINPUTCONTROL
source
match the colours
AC INPUT
L
RGB-PC
AUDIO INPUT
INPUT(VGA/SVGA)
PR
R
RGB INPUT/CONTROL
L
Camcorder
R
AUDIO
VIDEO
Video game set
To watch external AV
1
2
18
Press TV/AV button
on
source
the remote control
to select AV.
Operate
ment.
the
corresponding
external
equip-
TV/AV
First ep
DVD
Watching
How to connect
?
?
DVD input is set as 480i/480p mode.
Connect DVD video inputs to Y, PB, PR of COMPONENT
audio inputs to Audio sockets of AV INPUT.
EXTERNAL SPEAKER(8Ω)
(+)
EXTERNAL SPEAKER
(+)
R
()
()
L
AV INPUT
(8Ω)
R
(+)
AUDIO
L
R()
()
L
(+)
COMPONENT
(480/480p)
(DVDINPUT)
AVINPUT
R AUDO L
<MONO>
VDEO
Y
PB
RGB-PCINPUT(VGA/SVGA)
PR
COMPONENT
(480i/480p)
(DVD INPUT)
(MONO) VIDEO
Y
PB
AUDIOINPUT
R
RGB INPUT/CONTROL
(480i/480p) (DVD INPUT)
Compsiton
and
ConectiBasfu
AC INPUT
L
RGB-PC
AUDIO INPUT
INPUT(VGA/SVGA)
R
PR
RGB INPUT/CONTROL
L
Picture
<
Back
panel
of the Monitor>
Sound
AUDIO
(R)
<
(L)
Back
panel
of
a
DVD
player>
?
How to
use
Component Input ports
can get better picture quality if you
connect DVD player with component input
You
ports
?
?
Press MULTIMEDIA or TV/AV button on the remote
control to select COMPONENT.
Try this after turning on the DVD player.
as
below.
Component ports
of the
Monitor
Video
output ports
of DVD
player
Specialfunto
YPBPR
Y
Y
Y
Pb
B-Y
Cb
Pr
R-Y
Cr
19
Others
PC
Connecting
-
You
can
enjoy
vivid
and sound with
picture
connecting
a
PC with the Monitor.
How to connect
?
?
?
?
?
Set the video mode of PC to VGA/SVGA to obtain the best picture quality for the Monitor.
If the resolution of PC is over SVGA, there will be no picture on the Monitor.
Connect the signal cable from the monitor output port of the PC to the RGB-PC INPUT(VGA/SVGA)
port of the Monitor.
Connect the audio cable from the PC to the Audio ports of the Monitor. (Audio cables not included with the Monitor)
In case of using a sound card adjust PC sound properly.
EXTERNAL SPEAKER(8Ω)
(+) R ()
EXTERNAL SPEAKER
(+)
R
()
Back
<
How to
()
L
AV INPUT
(8Ω)
(+)
panel
R
AUDIO L
()
L
(+)
COMPONENT
(480i/480p)
(DVD INPUT)
AV INPUT
R AUDIO L
<MONO>
VIDEO
Y
PB
RGB-PC
AUDOINPUT
INPUT(VGA/SVGA)
PR
R
COMPONENT
(MONO) VIDEO
(480i/480p)
(DVD INPUT)
Y
PB
RGBINPUTCONTROL
AC INPUT
L
RGB-PC
INPUT(VGA/SVGA)
PR
AUDIO INPUT
R
RGB INPUT/CONTROL
L
of the Monitor>
use
MULTIMEDIA
TV/AV
?
Press POWER button on the PC and press ON/OFF button
the Monitor. After this press
button on the Monitor or
press POWER button on the remote control.
Press MULTIMEDIA or TV/AV button on the remote control to select RGB-PC.
Set the resolution of PC under SVGA (800x600). (Refer to
on
?
<On the remote control>
?
page
21.)
Tips
?
?
?
20
If still picture is on the screen for a long period time, Screen Burn !
If the resolution of PC is over SVGA, connect to the RGB-PC INPUT(VGA/SVGA) port of
the Monitor after changing the resolution of PC under SVGA.
If picture isn't be displayed properly by connecting a non-standard PC, contact your dealer for more information.
First ep
Displayable
Resolution
Monitor
Horizontal
Specification
Vertical
Frequency (KHz) Frequency (Hz)
640x400
37.861
85.08
720x400
31.469
70.08
31.469
59.94
35.000
66.66
37.861
72.80
37.500
75.00
43.269
85.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
53.674
85.06
49.725
74.55
640x480
(VGA)
800x600
(SVGA)
832x624
Compsiton
ConectiBasfu
Picture
Sound
Specialfunto
Others
21
Function
-
Make
sure
to select RGB-PC before
1
MENU
in PC mode
checking
operating.
the MENU button.
Repeatedly press
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
ΔΕ
ΦΓ
0
OK
<Picture
Clock
MENU
TV/AV
menu>
0
Equalizer
0
Balance
Flat
0
15
phase
Auto-configure
Reset
ΔΕ
ΦΓ
OK
MENU
<Special
TV/AV
ΔΕ
ΦΓ
OK
MENU
<Sound
menu>
TV/AV
menu>
PR
2
PR
VOL
VOL
3
OK
Press the
?
Δ
The selected
/
button to select
menu
Press the Φ /
menu item.
?
Ε
Γ
item
changes
button to
a menu
item.
from white to
purple.
change
the
setting of
a
Press the TV/AV button to exit.
Tips
?
22
Only when Equalizer
be adjusted.
is set to User, Treble and Bass
are
displayed
and
can
Auto
-
configure
This function is for the automatic
1
First ep
in PC mode
Adjusting
adjustment
Repeatedly press the MENU
special menu.
of the
screen
position
and clock
Compsiton
phase.
button
to select the
0
0
Clock
15
phase
Auto-configure
ConectiBasfu
Reset
MENU
ΔΕ
2
Press the
ΦΓ
OK
MENU
TV/AV
/ Ε button to select Autoand then press the Φ / Γ
Δ
configure
button.
0
0
Clock
15
phase
Auto-configure
Picture
Reset
PR
VOL
VOL
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
Sound
3
Press the OK button.
Specialfunto
OK
?
If
picture
Monitor's
needs to be
position
adjusted more after auto adjustment, adjust your
phase manually.
and clock
Others
23
in PC mode
Adjusting
Adjusting
1
horizontal / vertical
Repeatedly press the MENU
special menu.
position
button
to select the
0
0
Clock
15
phase
Auto-configure
Reset
MENU
ΔΕ
2
PresstheΔ/Εbuttontoselect
or
MENU
TV/AV
0
0
Clock
VOL
VOL
?
?
Select
Select
15
phase
Auto-configure
Reset
ΔΕ
PR
ΦΓ
OK
MENU
TV/AV
for horizontal position adjustment.
for vertical position adjustment.
Press the Φ / Γ button to adjust until you get desired horizontal
vertical position and then press the OK button.
OK
VOL
24
OK
.
PR
3
ΦΓ
VOL
or
First ep
clock
Adjusting
?
1
In case that picture isn't
adjust phase manually.
phase
clear after auto
adjustment
Repeatedly press the MENU
special menu.
and
especially
that characters
are
Compsiton
trembling,
button
to select the
0
0
Clock
15
phase
Auto-configure
Reset
ConectiBasfu
MENU
ΔΕ
2
Press the
Δ
/
Ε
ΦΓ
OK
MENU
TV/AV
button to select Clock
phase.
0
0
Clock
15
phase
Auto-configure
Reset
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
Picture
PR
3
Press the
button.
Φ
/
Γ
button to
adjust phase
and then press the OK
Sound
OK
VOL
VOL
Specialfunto
Initializing
?
To initialize the adjusted value, select Reset with the
press the Φ / Γ button.
Δ
/
Ε
button and then
Others
25
Using
Inserting
the remote control
batteries
?
the
Open
battery compartment
cover on
side and insert the batteries with correct
?
Apply
two 1.5V alkaline batteries of AAA
Don't mix the used batteries with
?
Notes for
Make
sure
objects
26
using
these
are no
between the
new
Install the batteries with the correct
the back
polarity.
type.
batteries.
polarities.
the remote control
Don't
place
near a
the remote control
heater
remote control and its
Strong impact
sensor.
trol may
damp place.
or
cause
on
the remote
operation
con-
failure.
Signal
from the remote control
may be disturbed by sun light or
other strong light. In this case,
turn the set to other direction.
Turning
-
When
using
Turning
aim it at its
the Monitor
just
sensor on
First ep
the Monitor
the Monitor.
Compsiton
after installation
correctly.
ConectiBasfu
Press the ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
INPUT SELECT button on the
Monitor or press the TV/AV, MULTIMEDIA button on the remote control and
then the Monitor will be switched on.
2
,
Turning
2
on
control,
Connect power cord
1
1
the remote
on
on
the Monitor
(power
cord is still
If the Monitor is turned off with the
?
connected)
button
on
the Monitor
Press the
INPUT SELECT button on the Monitor or press the TV/AV,
MULTIMEDIA button on the remote control to turn on the Monitor.
,
If the Monitor is turned off with the ON/OFF button
?
Press the ON/OFF button
on
the Monitor to turn
on
on
Picture
the Monitor
the Monitor.
Sound
3
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
?
Press the ON/OFF button on the Monitor and then press the
INPUT
SELECT button on the Monitor or press the TV/AV, MULTIMEDIA button
the remote control to turn on the Monitor.
Specialfunto
,
Tips
Adjusting
Volume(Γ)
?
volume level
button increases the level of sound and
decreases the level of sound.
volume(Φ)
on
Others
button
27
the
Selecting
1
on screen
Repeatedly press the MENU
special menu.
language
button
to select the
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
2
Press the
/ Ε button to select
and
then press the OK butLanguage
ΦΓ
OK
MENU
TV/AV
Δ
ton.
PR
Child lock
Off
Auto
Off
sleep
Language
OK
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
3
Press the
Δ
/
Ε or Φ
/
Γ
button to select the desired
PR
VOL
VOL
PR
4
Press the TV/AV button to exit.
TV/AV
Tips
?
28
You
can
select your desired
language only
in AV mode.
language.
Function
1
MENU
First ep
checking
Repeatedly press
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
ΔΕ
ΦΓ
0
OK
MENU
<Picture
menu>
Off
Equalizer
Auto
Off
Balance
ΔΕ
ΦΓ
OK
<Special
MENU
ConectiBasfu
TV/AV
Child lock
sleep
Language
Compsiton
the MENU button.
TV/AV
ΔΕ
Flat
0
ΦΓ
OK
<Sound
menu>
MENU
TV/AV
Picture
menu>
PR
2
PR
VOL
VOL
3
Press the
?
Δ
The selected
/
button to select
menu
Press the Φ /
menu item.
?
Ε
Γ
item
changes
button to
a menu
item.
from white to
purple.
change
the
setting of
Sound
a
Specialfunto
Press the TV/AV button to exit.
Tips
?
?
Only when Equalizer is set to User, Treble
be adjusted.
Language is displayed only in AV mode.
and Bass
are
displayed
and
Others
can
29
Picture
-
You
can
adjustment
adjust picture contrast, brightness, colour intensity, sharpness
or NTSC input only) to the levels you prefer.
and tint
NENT, RGB-PC mode
1
Repeatedly press the MENU
picture menu.
button
to select the
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
0
MENU
ΔΕ
2
Press the Δ / Ε button to select the
desired picture item and then press the
Φ / Γ button to make
appropriate
adjustments.
OK
ΦΓ
MENU
TV/AV
' Contrast
100
Ω Brightness
55
・ Colour
50
≥
60
Sharpness
? Tint
Δ Ε
OK
0
MENU
TV/AV
PR
VOL
VOL
PR
3
Press the OK button to store it for the
picture User and then press the TV/AV
button.
' Contrast
Ω Brightness
100
55
・ Colour
50
≥
60
Sharpness
? Tint
0
OK
TV/AV
?
preferred setting, press the PSM button until the desired pic(Dynamic, Standard, Mild or User) appears. The picture
Dynamic, Standard and Mild are programmed for good picture reproduction at the factory and cannot be changed.
To recall your
ture
30
Stored
(COMPO-
First ep
Picture format
-
You
can
(Wide)
watch Plasma
Zoom.
Display
in various
picture formats;
4:3
(Standard),
16:9
or
ARC
(Aspect
Ratio
Repeatedly press the ARC button
your desired picture format.
ARC
?
Compsiton
Control)
to select
ConectiBasfu
4:3
This
picture format
Display.
is 4 to 3 of
general
Plasma
?
16:9
enjoy the cinema (the picture format
of 16:9) or general Plasma Display programme through the 16:9 mode.
The screen 16:9 is viewed just like that but
the screen 4:3 is magnified to the left and
right so that the screen 16:9 is full.
You
?
can
Picture
Zoom
You
can
enjoy
the cinema in
a
vast screen
through the Zoom mode. The screen 4:3 is
magnified to the upper/lower sides so that
16:9 is full. The bottom and
the
screen
the
picture may
Sound
top of
be lost.
Specialfunto
Tips
?
?
?
When you switch the Monitor to standby or off, the 16:9 or Zoom picture format
is reset to the 4:3.
In COMPONENT mode, this function doesn't work.
Only when receiving RGB-PC signal (over 800 x 600) in RGB-PC mode, you can
select Zoom.
31
Others
Sound
-
You
can
select your preferred sound
treble and bass.
adjustment
setting; Flat, Music,
Movie
or
Speech
and you
can
adjust balance,
1
Repeatedly press
the MENU button
to select the sound menu.
Flat
Equalizer
Balance
0
MENU
ΔΕ
2
Press the Δ / Ε button to select the
desired sound item and then press the
Φ / Γ button to make desired
adjust-
ΦΓ
OK
MENU
TV/AV
Flat
Equalizer
Balance
0
ments.
?
In
case
of
Equalizer User, you
can
adjust
ΔΕ
ΦΓ
OK
MENU
TV/AV
Treble and Bass.
PR
VOL
VOL
User
Equalizer
Balance
0
Treble
50
Bass
50
PR
ΔΕ
?
3
OK
MENU
TV/AV
preferred setting, press the SSM button until the desired sound
(Flat, Music, Movie, Speech or User) appears. The sound Flat, Music,
Movie and Speech are programmed for good sound reproduction at the
factory and cannot be changed.
To recall your
Press the TV/AV button to exit.
TV/AV
32
ΦΓ
also
First ep
Child lock
-
The Monitor can be set so that the remote control is needed to control it. This feature
used to prevent unauthorized viewing.
1
Repeatedly press the MENU
to select the special menu.
can
be
Compsiton
button
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
Press the
2
Δ
/
Ε
ΦΓ
OK
MENU
TV/AV
ConectiBasfu
button to select Child
lock.
Child lock
Off
Auto
Off
sleep
Language
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
Picture
Press the
Φ
/
Γ
button to select On.
3
Child lock
On
Auto
Off
sleep
Language
VOL
VOL
ΔΕ
?
ΦΓ
OK
MENU
Sound
TV/AV
With the lock on, the display Child lock on appears on the screen if any
button on the Monitor is pressed while viewing the Plasma Display.
Specialfunto
Press the TV/AV button to exit.
4
TV/AV
Others
33
Auto
-
sleep
If you select Auto sleep On, the Monitor will automatically switch itself to
ten minutes after no input signal.
standby
approximately
1
Repeatedly press the MENU
special menu.
button
to select the
Child lock
Off
Auto
Off
sleep
Language
MENU
ΔΕ
Press the
2
Δ
/
Ε
ΦΓ
OK
MENU
TV/AV
button to select Auto
sleep.
Child lock
Off
Auto
Off
sleep
Language
PR
ΔΕ
ΦΓ
OK
MENU
TV/AV
PR
Press the
Φ
/
Γ
button to select On.
3
Child lock
Off
Auto
On
sleep
Language
VOL
VOL
ΔΕ
Press the TV/AV button to exit.
4
TV/AV
34
ΦΓ
OK
MENU
TV/AV
mode
First ep
Sleep timer
-
You don't have to remember to switch the Monitor off before you go to sleep. The
automatically switches the Monitor to standby after the preset time elapses
sleep
timer
Compsiton
Press the SLEEP button to set sleep time.
Each time you press this button setting time
is changed as below.
SLEEP
---
10
20
30
120
90
60
ConectiBasfu
240
180
---
Picture
?
To release sleep time setting, press the SLEEP
---.
button repeatedly to select
Sound
Specialfunto
Tips
?
?
To view the remaining sleep time, press the SLEEP button once.
When you switch the Monitor off, the Monitor releases the preset
sleep
Others
time.
35
check list
Troubleshooting
?
No
picture
&
?
No sound
?
Check whether the Monitor is turned
on.
Check the power cord.
Plug another product's power cord into the wall outlet where
the Monitor's power cord was plugged in.
Picture OK &
?
No sound
?
Press the VOLUME
Check to
see
?
doesn't work
No
or
or
picture
No
output from
of the
one
object
if the batteries
to
between the Monitor and
obstruction.
are
installed with the correct
p.26)
batteries.
?
Adjust picture
?
Keep
?
Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
a
?
?
new
items in the
picture
p.26)
menu.
(Refer
to
p.30)
certain distance between the Monitor and the VCR.
gets dark.)
Check the kind of
Adjust
(Refer
to
Replace
input signal.
Balance in the sound
menu.
(Refer
to
p.32)
Speakers
?
Strange
sound
from the Monitor
The
ing
reason
strange sound
the Monitor
output
on or
faulty.
comes
from the Monitor when turn-
off is due to the
to the Monitor. This
the Monitor is
36
causing
?
screen
Poor stereo sound
see
polarities. (Refer
Poor colour
Poor
Check to
button.
if there is any
the remote control
The remote control
(Γ)
signals being input
strange noise does not
mean
or
that
First ep
Note
Compsiton
ConectiBasfu
Picture
Sound
Specialfunto
Others
37
Note
38
Product
First ep
specifications
Compsiton
MT-40PA10/A/B/G/K/S
MZ-40PA10/A/B/G/K/S
MODEL
Width
Height (inches)
28
Depth (inches)
3.1
Weight (pounds)
71.8
Power
AC110-240V
requirement
Resolution
Colour
?
This
ConectiBasfu
36.6
(inches)
640
x
50/60Hz
~
480
Picture
(Dot)
16,770,000 (256 steps of each R, G and B)
product specifications
improvement.
above
can
be
changed
without notice for
Sound
quality
Specialfunto
Others
39
P/NO
:
3828VA0233A d
(MP00MB, 067G TX)
Download PDF