LG | MT-50PZ41V | LG MT-50PZ41V Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
MT-50PZ40V/A/B/K/R/S
MT-50PZ41V/A/B/K/R/S
MT-50PZ43V/A/B/K/R/S
MZ-50PZ42V/A/B/K/R/S
MZ-50PZ43V/A/B/K/R/S
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
tion to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0385A
cover
require
(RF02CA,
and quote this informa-
service.
067Y TX,
373-026H)
LG Plasma Monitor
What is
If
is
voltage
Plasma
a
inputted
Display
to gas in
?
glass panels,
ultraviolet rays is
moment, light is emitted. A Plasma Display is
160°
-
Wide
A Plasma
angle range
Display provides
a
outputted and fused with a fluorescent
generation flat Display using this phenomenon.
next
substance. At this
of vision
than 160°
more
angle
range of vision
so
that you
can
get
a
without distortion from
picture
any direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
The
screen
screen
of
a
Plasma
Display
Multimedia Plasma
A Plasma
and
Display
can
is 50"
so
that you
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
a
computer
so
that you
can use
it
as a screen
for
conference, game, internet
so on.
The
explanation
The PDP which is the
about coloured dots may be present
display
device of this
product
is
composed
on
PDP
screen
of 0.9 to 2.2 million cells and
in the manufacture of the PDP. Several coloured dots visible
on
the
a
few cell defects
acceptable, in line
PDP manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
responds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
occur
screen
would be
can
with other
which
cor-
WARNING
This is Class A
case
the
user
product. In a domestic environment this product
required to take adequate measures.
may
cause
radio interference in which
may be
WARNING
MT-50PZ40 / MZ-50PZ42 series
cause
:
This is Class B
radio interference in which
case
the
user
product.
may be
In
a
domestic environment this
required
to take
adequate
product
may
measures.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Contents
SafetyInstructions................................................4
Equipment
Connections and
Setup
ControlsoftheMonitor.............................................6
WatchingExternalEquipments.......................................7
DisplayableMonitorSpecification....................................10
ControlsoftheRemotecontrol......................................11
InstallationoftheSimplemonitorstand...............................13
Monitorinstallation...............................................13
Basic Features Setup and Operation
TurningontheMonitor............................................14
Menulanguagesetup.............................................14
VIDEO Menu
PSM(PictureStatusMemory).......................................15
AdjustingAutoColourControl.......................................15
ManualColourTemperatureControl..................................15
ManualpictureControl............................................15
AUDIO Menu
SSM(SoundStatusMemory).......................................16
AVL(AutoVolumeLeveler).........................................16
AdjustingSound.................................................16
TIME Menu
SettingtheClock................................................17
SettingtheOn/OffTime...........................................17
AutoSleep.....................................................17
SleepTimer....................................................17
SPECIAL Menu
Childlock......................................................18
Orbiter........................................................18
WhiteWash....................................................18
MenuRotationForVerticalViewing..................................18
SCREEN Menu
Autoadjustment.................................................19
SettingPictureFormat............................................19
SplitZoom.....................................................19
ScreenPosition.................................................20
ManualConfigure................................................20
ScreenAdjustments..............................................20
Initializing(Resettofactoryvalue)...................................21
SelectingWideXGAMode.........................................21
PIP Function
WatchingPIP...................................................22
PIPAspectRatio................................................22
MovingthePIP.................................................22
MainPictureSizeAdjustment.......................................22
PIPSize.......................................................22
SwappingthePIP...............................................22
SelectingasourceinputsignalforthePIP.............................22
MainPicturePositionAdjustment....................................22
TWIN Picture
MainPictureSizeAdjustment.......................................23
SubPictureSizeAdjustment.......................................23
SelectingasourcefortheTwinPicture................................23
SwappingtheTwinPicture.........................................23
ExternalControlDeviceSetup....................................24
Others
After
reading this manual, keep it in the place
where the
always
Troubleshootingchecklist.........................................30
Productspecifications............................................31
user can
contact
easily.
3
Instructions
Safety
Use the Monitor at the
-
lower than the altitude of 6562 feet
place
(2000m)
to
get the best quality of picture
and sound.
W
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
Do not
use
room or
fire.
the Monitor in
any
This may
-
cause a
place
cause a
Do not
-
damp place such as a bathlikely to get wet.
where it is
fire
could
or
give
an
electric shock.
In
cable
antenna
building
to
and
damaged
damaged
of smoke
or
the Monitor
could
give
an
electric
strange smell from the Monitor,
,unplug it from the
your dealer
or
This may
cleaning.
or
wall outlet and contact
service center.
cause a
fire
or
could
give
an
electric shock.
outside
Do
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
case
water the Monitor while
cause
switch it off
-
Bend
use
This may
shock.
inside the Monitor and could
not
attempt
to
Contact your dealer
-
This may
shock.
cause
service
or
the
Monitor
yourself.
service center.
damaged
the Monitor
or
could
give
an
electric
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
a
danger
of
electric shock caused
-
If
er
grounding
should be
methods
are
employed
not
During
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
possible, a separate circuit breakby a qualified electrician.
and installed
-
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
Power
supplier
Short-circuit
breaker
-
Do not connect
ground
to
telephone wires, lightning
rods
or
gas
pipe.
Do not
placing anything containing liquid
on
top of
the Monitor.
-
This may
cause a
Do not insert any
-
This may
Do not
-
cause a
fire
or
could
cause
an
or
could
serious
injury
give
on
to
a
an
4
This set is
vent.
electric shock.
the Monitor.
child
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
give
or
adult.
only
supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
damage
or
death.
of the
product.
Take
care
of
under
danger that may happen
specific condition.
NOTE
This
plasma display is designed
zontally (wide viewing).
Never touch the power
-
This may
cause an
plug with
to be mounted hori-
-
a
This may
Do not
wet hand.
aged
electric shock.
like
objects
a
plug
the
or
heater.
cause a
fire
or an
electric shock.
when the power cord or the plug is damconnecting part of the power outlet is
loose.
Disconnect from the mains and
tions before
Do not
as a
-
all
connec-
-
This may
cause a
fire
or an
electric shock.
moving.
place the Monitor
bookcase
Ventilation
remove
in
a
built-in installation such
rack.
or
Dispose of used batteries carefully
eating them.
to
protect
a
child
from
-
In
case
that it eats them, take it to
see a
doctor
immediately.
required.
When
moving the Monitor assembled with speakers
holding the speakers.
do
not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
This may
shock.
cause
damaged
the Monitor
Contact the service center
When
to
-
installing the Monitor on
place the edge of its stand.
table,
a
be careful not
injury
to
could
a
year to clean the
give
an
electric
internal part of the Monitor.
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
once
or
Accumulated dust
can cause
mechanical failure.
a
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
Do not
place
an
outside antenna in the
head power lines
or
vicinity of overother electric light or power cir-
screen.
-
If not, eyes will strain.
cuits.
-
This may
cause an
Unplug the Monitor
electric shock.
from the wall outlet when it is left
unattended and unused for
-
Accumulated dust may
deterioration or electric
Only
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
antenna
touching
-
an
outside
power lines to keep the former from
the latter even when the antenna falls.
This may
Do not
-
enough distance between
and
cause an
pull the
This may
electric shock.
cord but the
cause a
plug
when
unplugging.
fire.
Ensure the power cord doesn't trail
across
any hot
5
Controls of the Monitor
<Front Panel Controls>
VOL
Power
ON/OFF
INPUTSELECT
INPUT SELECT button
standby indicator
red in standby
Main power button
MENU button
Illuminates
mode.
MENU
Illuminates
green
when the Monitor is turned
VOLUME
(Φ,Γ) buttons
Remote control
sensor
Δ,Ε buttons
on
<Back Panel>
Y
R AUDIO L (MONO)
()R ()
EXTERNAL SPEAKER (8Ω)
AUDIO
INPUT
AC INPUT
VIDEO
INPUT
S-VIDEO
PB
PR
COMPONENT(480i/480p)
(DVD INPUT)
R AUDIO L
()L ()
AUDIO
INPUT
RGB1 OUTPUT
(PC OUTPUT)
AUDIO
INPUT
RGB1 INPUT
(PC INPUT)
RGB2 INPUT
RGB INPUT)
(DIGITAL
RS-232C INPUT
(CONTROL/SERVICE)
EXTERNAL SPEAKER (8Ω)
AUDIO INPUT
VIDEO
INPUT
RS-232C
COMPONENT
INPUT
RGB1 INPUT
(DVD INPUT)
AUDIO INPUT
Connection to AV
Note
6
:
RGB2 INPUT
AUDIO INPUT
S-VIDEO
All cables shown
are
except : A D-sub
15
not
provided
(PC INPUT)
Connection to PC
equipment
pin
(DIGITAL
RGB INPUT)
with the Monitor,
cable and DVI cable is
supplied
to connect the Monitor to
a
PC.
INPUT
External
Watching
Equipments
<Back Panel>
RCA
Type
()
AUDIO
()
1
Scart
()
Y
(MONO)
2
PB
PR
AUDIO
3
4
()
()
()
()
5
Type
()
3
1.
EXTERNAL SPEAKER
(8
ohm
output)
optionally available speaker.
information, refer to 'Speaker & Speaker
4.
Connect this terminal to the
*For further
stand' manual.
2.
POWER INPUT SOCKET
This Monitor
is
as
indicated
as
OUTPUT(PC OUTPUT)/AUDIO IN SOCKETS
watch the RGB1 signal in other monitor by connecting RGB1 OUTPUT(PC OUTPUT) to other monitor's
PC input jack.
Note : When you watch after connecting with other moncan
itor,
on an
AC mains
inside back
cover
supply,
the
voltage
a.
of this manual. Never
When you select RGB1 or RGB2 for main picture, you
watch AV1, AV2 or S-Video for sub picture.
can
b. When you select AV1, AV2 or S-Video for main
ture, You can watch main picture's viewing.
pic-
INPUT SOCKETS
RGB1 INPUT(PC INPUT)/RGB2 INPUT(DIGITAL
INPUT) IN SOCKETS
RGB
EURO SCART SOCKET
Connect the monitor
apply
3.
operates
RGB1
You
DC power to the Monitor.
VIDEO/S-VIDEO/COMPONENT(DVD INPUT)/AUDIO
output socket of the PERSONAL
COMPUTER to this socket.
Note
:
equipped
The
on
interface
board(AP-50EA40/41)
is
not
MT/MZ-50PZ42/43 series models. Contact
your dealer for
buying
this
optional item.
5.
RS-232C
INPUT(CONTROL/SERVICE)
Connect it to the RS-232C socket
on
SOCKET
the PC.
7
VCR (When the Interface board is installed.)
Watching
The interface
board(AP-50EA40/41)
is not
When
connecting the Plasma Monitor with
Audio(L) white, Audio(R) -red).
Connect the VIDEO INPUT socket(yellow)
equipped
external
on
MT/MZ-50PZ42/43 series models.
equipments,
match the colours of
connecting ports (Video
-
yellow,
-
with the BNC-RCA adapter to the VIDEO INPUT socket of the set.
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
4:3 picture format or if a CH label is present; the fixed image may remain visible on the screen.
Use the orbiter function to avoid having a fixed image. (Refer to p.18)
1. Press INPUT SELECT button on the remote control and select Video or (AV1 or AV2).
(When connecting with S-Video, select the S-Video)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's
Watching
board(AP-50EA40/41)
subscribing
to
a
is not
equipped
cable TV service from
This monitor cannot
ming.
from
a
VCR,
manual)
Cable TV (When the Interface board is installed.)
The interface
After
picture
display
TV
a
local
programming
on
MT/MZ-50PZ42/43 series models.
and
provider
without
a
installing
can watch cable TV programcable TV converter box connected to the
converter, you
a
TV tuner device
or
monitor.
1. Press INPUT SELECT button on the remote control and select Video
2. Tune to cable service provided channels using the cable box.
Watching
Or,
(AV1
or
AV2).
external AV
The interface
When
or
source (When the Interface board is installed.)
board(AP-50EA40/41) is not equipped on MT/MZ-50PZ42/43
connecting
the Plasma Monitor with external
equipments,
series models.
match the colours of
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
connecting ports.
1. Press INPUT SELECT button on the remote control of the monitor to select Video or (AV1
2. Operate the corresponding external equipment. (See external equipment operating guide.)
DVD (When the Interface board is installed.)
The interface board(AP-50EA40/41) is not equipped on MT/MZ50PZ42/43 series models.
Watching
?
INPUT)
Or,
and audio
inputs
inputs
to
Y, PB, PR of COMPONENT (DVD
AV2).
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
How to connect
Connect DVD video
or
below.
Component ports
of the
Monitor
to Audio sockets of AUDIO INPUT.
connect the Euro scart socket of the VCR to the Euro scart socket
of the set.
Video
How to
select
8
output ports
of DVD
use
1. Press INPUT SELECT button
2.
YPBPR
on
the remote control of the monitor to
Component or (AV1 or AV2).
Try this after turning on the DVD player.
(Refer to the DVD player's manual for operating instructions.)
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
Connecting
-
-
-
PC
To
enjoy vivid picture and sound, connect a PC to the Monitor.
Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Connect PC to the RGB1 INPUT(PC INPUT) or RGB2 INPUT(DIGITAL RGB INPUT) ports of the Monitor after changing
the resolution of PC.
-
There
some
change
might
until the
a
picture
-
-
-
-
-
-
graphic
graphic
card
or brightness in PC mode. Then change
adjust the brightness and contrast on the
not be changed, change the PC graphic card
contrast
the refresh rate into other rate
is clean. If the refresh rate of the PC
consult it to the manufacturer of the PC
can
or
card.
Synchronization input form; Separate
Setup Instructions
-
resolution, vertical pattern,
to
or
menu
-
noise
according
or
-
be
the PC mode into other resolution
to Connect
a
We recommend 1024x768 60Hz
PC to your Monitor
or 1366x768 75Hz as the PC mode
providing the best picture quality.
INPUT(PC INPUT) port of the Monitor or the
signal cable from the DVI output port of the PC to the RGB2 INPUT(DIGITAL RGB INPUT) port on the Monitor.
Connect the audio cable from the PC to the Audio input on the Monitor. (Audio cables are not included with the Monitor).
If using a sound card, adjust PC sound as required.
This monitor apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically to use this monitor.
DDC protocol is preset for RGB1 (Analog RGB), RGB2 (DVI, Digital RGB) mode.
If required, adjust the monitor settings for Plug and Play functionally.
If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB1 and
RGB2 to display the PC on the monitor.
If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB1 or RGB2;
(the other mode is set to Plug and Play automatically by the monitor.)
Connect the
signal
cable from the monitor
PC Setup
1. Turn on the PC and
2. Turn
on
the
apply power to
display by pressing the
3. Use the INPUT SELECT button
4. Set the resolution
on
output of the PC
?
For further information
?
To avoid
?
To avoid
output port of the PC
to the RGB1
the Monitor.
POWER button
on
the Monitor's remote control.
the remote control to select the RGB1
to WXGA
or
under
or
RGB2
input
source.
(1366x768, 84.99Hz).
regarding cable TV service, contact your local cable TV service provider(s).
picture noise (interference), leave an adequate distance between the VCR and monitor.
burning an image on the Monitor screen, don't have a still picture on the screen for a long period
time.
9
Monitor
Displayable
RGB1 mode
<
Resolution
Specification
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
31.469
70.08
DDC
Resolution
832x624
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
DDC
49.725
74.55
o
48.363
60.00
o
56.476
70.06
o
640x350
o
1024x768
720x400
37.927
85.03
60.023
75.02
o
31.469
59.94
o
68.677
84.99
o
35.000
66.66
o
54.348
60.05
o
37.861
72.80
o
63.995
70.01
o
1152x864
37.500
75.00
o
67.500
75.00
o
43.269
85.00
o
77.487
85.05
o
45.913
90.03
75.000
75.00
o
53.011
100.04
63.981
60.02
o
64.062
120.00
35.156
56.25
o
37.879
60.31
o
46.875
75.00
o
53.674
85.06
o
56.000
90.00
64.016
100.00
640x480
1280x960
1280x1024
1360x768
79.976
75.02
o
47.700
60.00
o
59.625
75.02
o
67.575
84.99
o
47.700
60.00
800x600
(Synchronization input
RGB2 mode
<
Resolution
form
:
1366x768
59.625
75.02
67.575
84.99
separate)
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
DDC
Resolution
640x350
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
DDC
60.023
75.02
o
68.677
84.99
o
54.348
60.05
o
63.995
70.01
o
1024x768
31.469
70.08
37.927
85.03
31.469
59.94
o
67.500
75.00
o
35.000
66.66
o
77.487
85.05
o
37.861
72.80
o
68.681
75.06
o
37.500
75.00
o
60.000
60.00
o
43.269
85.00
o
75.000
75.00
o
35.156
56.25
o
63.981
60.02
o
37.879
60.31
o
47.700
60.00
o
48.077
72.18
o
59.625
75.02
o
46.875
75.00
o
67.575
84.99
o
53.674
85.06
o
47.700
60.00
49.725
74.55
o
48.363
60.00
o
56.476
70.06
o
o
720x400
1152x864
640x480
800x600
832x624
1152x870
1280x960
1280x1024
1360x768
1366x768
1024x768
(Synchronization input
?
10
form
DOS mode may not work
:
separate)
depending
on
video card if
using
a
DVI-I cable.
59.625
75.02
67.575
84.99
Controls of the remote control
-
-
When
using the remote control aim it at the remote control sensor of the Monitor.
maybe defect in consecutive operation of remote control in specified brightness according
There's
to this monitor fea-
ture.
POWER
1.
switches the set
from
on
standby
off to
or
standby.
SLEEP
2.
sets the
PSM
3.
timer.
sleep
(Picture Status Memory)
preferred picture setting.
recalls your
POWER
1
SLEEP
ARC
(Aspect Ratio Control)
changes the picture format.
4.
INPUT SELECT
13
2
PSM
SSM
3
14
ARC
PIP
5.
PIP ARC
switches the sub
15
4
PIP
TWIN PICTURE
5
16
SWAP
on or
off.
SWAP
6.
alternates between main and sub
SUB INPUT
6
picture
17
MENU
MUTE
7
18
selects
8.
OK
VOL
picture.
MENU Button
7.
a menu.
Δ/Ε
selects
VOL
8
Φ
/ Γ
item.
a menu
(Volume Down/Up)
the volume.
adjusts
adjusts
menu
settings.
OK
the current mode.
displays
1
2
3
9.
4
5
6
10. VCR BUTTONS
7
8
9
9
NUMBER BUTTONS
control
LG video cassette recorder.
a
11. WIN. SIZE
0
the sub
adjusts
size.
picture
12. ZOOM-/ZOOM+
10
POWER
STOP
P/STILL
REW
PLAY
FF
13. INPUT SELECT BUTTON
selects
14. SSM
REC
WIN.SIZE
WIN.POSITION SPLIT ZOOM
11
12
ZOOM
-
ZOOM
+
or
PC monitor mode.
(Sound Status Memory)
preferred sound setting.
recalls your
19
20
TV, AV
15. PIP ARC
changes
the
picture
format of PIP.
16. TWIN PICTURE
17. SUB INPUT
selects the
input
mode for the sub
picture.
18. MUTE Button
switches the sound
on or
off.
19. SPLIT ZOOM
enlarge
the
screen
with
regular
ration.
20. WIN.POSITION
moves
Installing
the sub
picture
to Δ / Ε
or Φ
/ Γ direction.
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
Apply
new
the back side and
polarity.
two 1.5V alkaline batteries of AAA
used batteries with
?
cover on
type. Don't mix the
batteries.
Install the batteries with the correct
polarities.
11
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
PIPARC
PIP
TWINPICTURE
SWAP
SUB INPUT
MENU
MUTE
OK
VOL
1
2
4
5
7
8
VOL
3
6
9
0
POWER
REW
STOP
P/STILL
PLAY
FF
LG TV
1.5V
REC
WN.SIZE
ZOOM
WIN.POSITION SPLITZOOM
-
1.5V
ZOOM+
ASmark
Owner's Manual
D-sub 15
Optional
-
pin
cable
BNC-RCA
Alkaline batteries
Remote control handset
Power cord
DVI cable
adapter (optional)
Phone scart cable
(Optional)
Extras
Optional
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
-
Contract your dealer for
Tilt wall
mounting
Desktop
buying
bracket
stand
Ceiling mounting
12
these items.
bracket
Wall
mounting
bracket
Speakers
Video cables
Vertical Wall
mounting
Desktop Speaker
bracket
stand
PC audio cables
Monitor Installation
?
The Monitor
?
Install this monitor
be installed in various ways such such as on a wall, or on
only in a location where adequate ventilation is available.
?
This monitor is
can
designed
to be mounted
horizontally
or
Wall Mount: Horizontal installation
?
The monitor
can
be installed
on
the wall
as
shown
?
The monitor
can be installed vertically on the wall as
above.(For further information, refer to the
optional 'Wall Mounting Bracket Installation and Setup
Guide'.)
Caution: When installing the monitor vertically, the
front panel controls must be in the left-down side posi-
shown
tion
?
?
etc.
Wall Mount: Vertical installation
(For further information, refer to the optional
'Wall Mounting Bracket Installation and Setup Guide'.)
Speakers are optional, and shown for illustration only.
Desktop
desktop
vertically.
above.
?
a
as
shown above.
Speakers
are
optional,
and shown for illustration
only.
Pedestal Installation
The Monitor
can
be mounted
on a
desk
as
shown
above.
?
(For further information, refer to the optional
Desktop Stand Installation and Setup Guide.)
Speakers and speaker stands shown are optional, and
shown for example only.
13
Caution
?
?
When
installing the monitor vertically, you have to change the OSD display
correctly and also to protect the monitor from overheating (Refer to P. 18).
Install this monitor only in a location where adequate ventilation is available.
To Mount
on a
Wall
To Install
Wall mount minimum allowable clearances for
adequate
on a
mode
that the
so
menus
will appear
Desktop
Pedestal mount minimum allowable clearances for
ventilation
adequate
ventilation
10cm
10cm
3cm
10cm
3cm
10cm
10cm
10cm
10cm
Turning
When
-
Turning
1.
2.
using the
on
the Monitor
Connect power cord
Press the
the Monitor
on
remote
6cm
control,
just
aim it at its
after installation
ON/OFF button
on
on
the Monitor. At this moment, the Monitor is switched to
the Monitor
then the Monitor will be switched
1.
Press the
Press the
the
ON/OFF button
POWER,
The
is still
ON/OFF button
the Monitor to turn
on
the Monitor
on
the level of sound and
volume(Φ)
be
displayed
on
the
screen
in desired
language.
First select your
2..
Press the
Γ
button and then Δ / Ε button to select
3.
Press the
Γ
From this
point
button and then Δ / Ε button to select your desired language.
on, the on-screen display will be presented in the language of
your choice.
Press the MENU button.
Ε
on
the Monitor
button decreases the level of sound.
Press the MENU button and then Δ /
14
on
the Monitor
on
the Monitor.
language setup
menu can
mode. Press the
the remote control and
connected)
1.
4.
standby
on
the Monitor and then press the INPUT SELECT button
INPUT SELECT button on the remote control to turn on the Monitor.
Adjusting volume level
Volume(Γ) button increases
Menu
-
on
POWER, INPUT SELECT button
on.
(power cord
ON/OFF button
press the
If the Monitor is turned off with the remote control and also the ON/OFF button
?
?
the Monitor
or
If the Monitor is turned off with the
?
2.
on
the Monitor.
correctly.
INPUT SELECT button
Turning
sensor on
button to select the SPECIAL
menu.
Language.
language.
or
press
VIDEO Menu
-
Adjustment doesn't effect other input source. Readjust Video menu for each following mode.
:RGB1 (PC)/RGB2 (PC), COMPONENT (480p), VIDEO(AV1 or AV2)/S-VIDEO/COMPONENT (480i)
PSM
-
1.
(Picture Status Memory)
This function
adjusts
the PDP to the best
Press the PSM button to select the
Each press PSM button
?
changes
picture
the
You
?
The
1.
appearance
screen
display
setup.
shown below.
as
User
also select Dynamic, Mild or User in the VIDEO menu.
picture Dynamic and Mild are programmed for good picture reproduction
cannot be changed.
can
Adjusting
-
appearance.
Mild
Dynamic
?
picture
at the
and
factory
Auto Colour Control
To initial values
(reset
to default
settings),
select the 'Normal'.
Press the MENU button and then Δ / Ε button to select the VIDEO
menu.
VIDEO
PSM
CSM
2.
Press the
Γ
button and then Δ /
Ε
button to select CSM.
Colour
TIME
3.
Press the Δ / Ε button to select the desired colour
temperature.
SPECIAL
4.
Γ
AUDIO
Press the MENU button.
Contrast
100
Brightness
60
colour
50
Sharpness
50
Tint
Normal
Cool
Temp.
Warm
User
0
SCREEN
TWIN
MENU
?
Each press of Δ / Ε button
changes
Normal
Manual Colour
-
You
can
the
screen
display
Cool
as
Prev.
shown below.
Warm
User
Temperature Control(User option)
change red,
green and blue to
adjust
colour
temperature you prefer.
1.
Press the MENU button and then Δ / Ε button to select the VIDEO
2.
Press the
menu.
VIDEO
PSM
CSM
Γ
button and then Δ
/ Ε
button to select the Colour
AUDIO
Temp..
TIME
3.
Press the Γ button and then Δ /
Ε
button to select colour
temperature
items.
SPECIAL
4.
Press the Φ /
5.
Press the MENU button.
Γ
button to make
appropriate adjustments.
Colour
The
Manual
-
-
You
PIP
adjustment
picture
100
Brightness
60
Colour
50
Sharpness
50
Tint
Red
0
Green
0
Blue
0
0
SCREEN
TWIN
MENU
?
Γ
Temp.
Contrast
Prev.
range of Red, Green and Blue is -10~+10.
control
(User option)
can adjust picture contrast, brightness, colour, sharpness
settings are not adjustable.
and tint to the levels you
1.
Press the MENU button and then Δ / Ε button to select the VIDEO
2.
Press the
Γ
button and then Δ / Ε button to select the desired
3.
Press the
Γ
button and then Φ / Γ button to make
menu.
prefer.
VIDEO
PSM
picture
item.
AUDIO
Colour
TIME
appropriate adjustments.
SPECIAL
4.
CSM
Press the MENU button.
SCREEN
Temp.
Contrast
70Γ
Brightness
60
Colour
50
Sharpness
50
Tint
0
TWIN
MENU
Prev.
15
AUDIO Menu
SSM
-
1.
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content.
Press the SSM button to select the
Flat
?
AVL
-
1.
2.
You
can
(Auto
picture
Movie
Speech
also select
Volume
Flat, Speech, Movie, Music
an
equal
volume
Press the MENU button and than Δ /
Press the
or
Music
User in the AUDIO
User
menu.
Leveler)
This feature maintains
Γ
setup.
appearance
button and then Δ
/ Ε
level;
Ε
even
if you
change
channels.
button to select the AUDIO
menu.
VIDEO
SSM
AUDIO
button to select AVL.
TIME
3.
Press the Γ button and then Δ /
4.
Press the MENU button.
Ε
button to select On
or
AVL
Γ
Treble
50
Bass
50
Balance
Off.
0
SPECIAL
SCREEN
TWIN
MENU
Adjusting
1.
Sound
(Manual Setting)
Press the MENU button and then Δ /
Ε
button to select the AUDIO
menu.
VIDEO
SSM
2.
Press the Γ button and then Δ / Ε button to select the desired sound item.
3.
Press the Γ button and then Φ / Γ button to make
AUDIO
TIME
4.
Prev.
appropriate adjustments.
AVL
Treble
50Γ
Bass
50
Balance
0
SPECIAL
Press the MENU button.
SCREEN
TWIN
16
MENU
Prev.
On
Off
TIME Menu
Setting
the Clock
If current time
-
button
on
the
setting
is erased
by
a
power
failure, if TV is unplugged
Press the MENU button and then Δ / Ε button to select the TIME
1.
or
if the monitor is turned off with the
2.
Press the Γ button and then Δ / Ε button to select Clock.
3.
Press the Γ button and then Δ / Ε button to
menu.
VIDEO
AUDIO
4.
Press the Γ button and then Δ / Ε button to
5.
Press the MENU button.
operates only if
The monitor must be in
-
the hour.
adjust
the minute.
current time has been
standby
--
:
--
Auto
Sleep
SPECIAL
SCREEN
MENU
Prev.
they
already
are
set.
set to the
same
time.
mode for the On timer to work.
Press the MENU button and then
1.
adjust
TWIN
Off-timer function overrides on-timer function if
-
Γ
Off Time
the On/Off Time
Timer function
-
Clock
On Time
TIME
Setting
ON/OFF
reset the clock.
monitor,
/ Ε button to select the TIME
Δ
menu.
VIDEO
On Time.
AUDIO
Off Time
TIME
Auto
Clock
Press the Γ button and then Δ / Ε button to select Off Time
2.
or
On Time
Press the Γ button and then Δ / Ε button to select On.
3.
Γ
Off
On
Sleep
12
:
00
SPECIAL
Press the Γ button and then
4.
Δ
/ Ε button to
5.
Press the Γ button and then Δ / Ε button to
6.
Only
7.
Press the MENU button.
On Time
volume level.
function; Press the
adjust
the hour.
adjust
the minute.
Vol.
TWIN
button and then Δ / Ε button to
Γ
30
SCREEN
MENU
Prev.
adjust
To cancel Off/On Time function
-
Press the Δ / Ε button to select Off in
Auto
3.
Sleep
If there is
-
step
no
input signal,
the monitor turn off
automatically
after 10 minutes.
1.
Press the MENU button and then Δ / Ε button to select the TIME
2.
Press the Γ button and then Δ /
menu.
VIDEO
Clock
3.
Press the
Γ
button and then Δ /
Ε
Ε
button to select Auto
Sleep.
AUDIO
Off Time
TIME
Auto
On Time
button to select On or Off.
Sleep
Γ
Off
On
SPECIAL
4.
Press the MENU button.
SCREEN
TWIN
Sleep
timer turns the monitor off at the
preset time.
Press the SLEEP button to select the number of minutes. The
-
Prev.
Timer
Sleep
-
MENU
followed
zz
Min will appear on the screen,
to count down from the number of min-
display
by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins
---
utes selected.
When the
-
sleep
a.
To check the
b.
To cancel the
c.
If you turn
time you want is
displayed
on
the screen, press the OK button.
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
Min appears.
17
SPECIAL Menu
Child lock
-
The monitor
can
be set up
that it
so
can
only
be used with the remote control.
1.
Press the MENU button and then
2.
Press the Γ button and then Δ / Ε button to select Child lock.
Δ
/ Ε button to select the SPECIAL
3.
Press the Γ button and then Δ / Ε button to select On
4.
Press the MENU button.
or
menu.
VIDEO
Language
AUDIO
Child lock
TIME
White Wash
Γ
Orbiter
Off.
On
Off
Set ID
SPECIAL
OSD Rotate
SCREEN
TWIN
-
-
This monitor
programmed
In Child lock
on
while
it
last set to event if you turn the monitor off.
on the monitor or POWER and
was
the remote control.
With the Child lock
pressed
option
Prev.
'On', if the monitor is turned off, press the INPUT SELECT button
INPUT SELECT
-
to remember which
MENU
'
On, the display
viewing
Child lock' appears
on
the
screen
if any button
on
the front
panel
is
the monitor.
Orbiter
-
-
Avoid
:Right
-
keeping
a
fixed
image
remain
on
the Monitor's
PC/video game set displayed on the screen for
when you change the image.
To avoid a permanent image on the screen, the
→
Right
→
Downside
This is the function to
→
prolong
Downside
hour till
→
having
screen
Left
a
screen
for
long period
a
prolonged periods
→
fixed
will
Left
→
image
move
an
picture from
image ghost remaining even
a
every 2 minutes.
Upside
→
Upside
but it doesn't avoid
Press the MENU button and then Δ / Ε button to select the SPECIAL
1.
of time. A frozen still
will result in
menu.
permanent image perfectly.
VIDEO
Language
2.
Press the Γ button and then Δ / Ε button to select Orbiter.
3.
Press the Γ button and then Δ / Ε button to select On
or
AUDIO
Child lock
Orbiter
TIME
Off.
Γ
On
Off
White Wash
Set ID
SPECIAL
OSD Rotate
Press the MENU button.
4.
SCREEN
TWIN
MENU
Prev.
White Wash
-
-
This is the function to
remove
permanent image
Set White Wash 'On' until fixed
on
the
screen.
image disappears.
Press the MENU button and then Δ / Ε button to select the SPECIAL
1.
menu.
VIDEO
Language
2.
Press the Γ button and then Δ / Ε button to select White Wash.
3.
Press the Γ button and then Δ / Ε button to select On
AUDIO
Orbiter
TIME
or
Child lock
Off.
White Wash
Γ
Set ID
SPECIAL
On
Off
OSD Rotate
Press the MENU button.
4.
SCREEN
TWIN
Menu Rotation for Vertical
Δ
/ Ε button to select the SPECIAL
Press the Γ button and then Δ / Ε button to select OSD Rotate.
2.
menu.
VIDEO
AUDIO
Press the Γ button and then Δ / Ε button to select Normal or Rotate.
?
Normal, if the monitor was installed horizontally.
Select Rotate, if the monitor was installed vertically.
18
Press the MENU button.
Set ID
OSD Rotate
Select
Γ
Normal
Rotate
SCREEN
TWIN
4.
Orbiter
White Wash
SPECIAL
?
Language
Child lock
TIME
3.
Prev.
Viewing
Press the MENU button and then
1.
MENU
MENU
Prev.
SCREEN Menu
Auto
-
adjustment (RGB1[PC]
mode
Automatically adjusts picture position
Press the MENU button and then
1.
only)
and minimizes
Δ
image shaking.
/ Ε button to select the SCREEN
2.
Press the Γ button and then Δ / Ε button to select Auto
3.
Press the Γ button to start Auto
VIDEO
When Auto
?
If the
Auto
configure.
Manual
Screen
in
adjustment
To set
Position
TIME
after Auto
Γ
Zoom In/Out
configure.
picture needs to be adjusted more
adjust the Manual config..
configure
ARC
AUDIO
SPECIAL
configure has finished, OK will be shown on screen.
position of the image is still not correct, try Auto adjustment again.
?
If
4.
menu.
config.
adj.
Reset
XGA Mode
SCREEN
RGB1(PC),
TWIN
you
MENU
Prev.
can
-
-
-
image is still not correct, your Monitor is functioning properly but needs further adjustment.
configure and the Manual config. functions don't need to be run for RGB2 mode.
function doesn't work in RGB-Digital broadcast.
Although
This
Setting
-
You
Picture Format
are
(Except
-
-
the
The Auto
You
available to 4:3 and 16:9 in RGB1 and RGB2.
RGB1
RGB2
(480p),
(480p)
and COMPONENT
available to 16:9, 4:3 and ZOOM in VIDEO
COMPONENT (480p).
are
If 4:3 is
the
on
screen
for
a
long time,
Press the ARC button to select
1.
?
?
a
that fixed
desired
(AV1
image
picture
(480p))
or AV2), S-VIDEO,
-
-
-
-
1.
RGB2
(480p),
(480p)
and
may remain visible.
format.
Each press of ARC button changes the screen display as shown below.
can also select 16:9, 4:3 or Zoom in the SCREEN menu.
You
4:3
16:9
Split
RGB1
Zoom
Zoom
This is the function to
It's available to
enlarge
With 2-SPLIT
ZOOM, you
If
enlarged,
a screen
is
the
with
screen
this function in every
use
can
only
move
the
a screen can move
ration.
regular
input
source.
into upside or downside.
selecting a section of screen.
screen
without
Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
2-Split
changes
Zoom
the
screen
4-Split
Δ
1
1
Ε
display
as
shown below.
Zoom
9-Split
Zoom
123
Δ
Ε
2
Δ
Ε
456
2
In
case
of
4
ΦΓ
9-Split
5
ΦΓ
usingtheΔ/Ε
move
the
enlarged
screen
with
orΦ/Γbutton.
In
Zoom
123
ΦΓ
Zoom:
Press the number button to select the section you enlarge.
If you choose No.5, the 5 section is enlarged and also can
9-Split
789
case
of
choosing
the No.5
Δ
Ε
456
789
ΦΓ
The 5 section is
changed
to
a
full
screen.
19
Screen Position
-
This function works in the
RGB1-PC
following mode:
480p,720p,1080i.
COMPONENT
or
1.
Press the MENU button and then Δ /
2.
Press the Γ button and then Δ / Ε button to select Position.
3.
Press the Γ button and then Δ / Ε
button to select the SCREEN
Ε
menu.
VIDEO
Auto
AUDIO
configure
ARC
Zoom In/Out
¡ª
4.
/ Γ button to
or Φ
the
adjust
TIME
Position
position.
Manual
SPECIAL
Screen
SCREEN
XGA Mode
Press the MENU button.
Manual
-
1.
Configure (RGB1[PC]
If the
isn't clear after auto
picture
phase manually.
To correct the
screen
mode
MENU
3.
Prev.
adjustment
and
that characters
especially
are
still
the
trembling, adjust
Press the Γ button and then
button to select the SCREEN
Ε
Δ
/ Ε button to select Manual
menu.
VIDEO
AUDIO
config..
Press the Γ button and then Δ / Ε button to to select Phase
5.
Press the Φ / Γ button to make
?
The
?
The
or
configure
ARC
Zoom In/Out
TIME
Clock.
Position
Manual
config.
Screen
adj.
appropriate adjustments.
SCREEN
31.
range of Phase is 0
+50.
range of Clock is -50
Adjustments (VIDEO (AV1
This is the function to correct
or
trembling
Press the MENU button and then Δ /
Press the Γ button and then
0
XGA Mode
TWIN
MENU
AV2),
S-VIDEO and COMPONENT 480i mode
Prev.
while
or
picture instability
Ε
button to select the SCREEN
viewing
a
video
menu.
only)
tape.
VIDEO
Auto
Press the
Γ
Δ
/ Ε button to select Screen
adj..
button and then Δ / Ε button to to select TV or VCR.
AUDIO
?
?
Select the VCR
Select the
if
VCR.
option watching
TV option for other equipment.(Except VCR)
a
Position
Manual
config.
Screen
adj.
XGA Mode
MENU
Γ
TV
VCR
Reset
SCREEN
TWIN
Press the MENU button.
configure.
ARC
Zoom In/Out
TIME
SPECIAL
20
0
~
1.
4.
Phase
Clock
~
2.
3.
Γ
Reset
Press the MENU button.
Screen
-
adjustment
adjustment
picture
size, adjust Clock.
Press the MENU button and then Δ /
SPECIAL
4.
¡
only)
Auto
2.
¢"
¢'
Reset
TWIN
-
Γ
config.
adj.
Prev.
Initializing (Reset
This function
to
factory value)
operates in every mode.
To initialize the
adjusted
value
1.
Press the MENU button and then
2.
Press the
Δ
/ Ε button to select the SCREEN
menu.
VIDEO
Auto
configure.
ARC
Γ
button and then
Δ
AUDIO
/ Ε button to select Reset.
Zoom In/Out
Position
TIME
3.
Press the Γ button.
?
You
can
initialize ZOOM
tion and sub
picture
In/Out, Position, SPLIT ZOOM, PIP size, PIP posi-
size of twin
-
To
see a
Wide XGA mode
normal
picture,
tion of XGA mode
on
Γ
To Set
Γ
1024x768
XGA Mode
picture.
RGB2
(RGB1,
[PC]
match the resolution of RGB
the SCREEN
1. Press the MENU button and then
mode
MENU
Prev.
only)
(1024x768,
1360x768
or
1366x768)
mode and selec-
menu.
use
Δ
/ Ε
button to select the SCREEN
Auto
VIDEO
configure.
ARC
Zoom In/Out
menu.
2. Press the Γ button and then
config.
adj.
Reset
SCREEN
TWIN
Selecting
Manual
Screen
SPECIAL
AUDIO
use Δ / Ε
button to select XGA Mode.
Position
Manual
TIME
Screen
config.
adj.
Reset
3. Press the Γ button and then
tion.
4. Press the MENU button.
use Δ / Ε
button to select the desired XGA resolu-
SPECIAL
XGA Mode
1360x768
SCREEN
TWIN
1366x768
MENU
Prev.
21
PIP Function
-
-
PIP lets you view 2 different inputs (sources) on your monitor
and the other source will show a smaller inset image.
When you select RGB1 or RGB2 for main
Component 480i for sub picture.
Watching
picture
in
PIP, you
PIP
screen
can
on
the sub
Aspect
pictures.
The sub
to switch it off.
again
time. One
(AV1
or
AV2),
source
will be
S-Video
large,
or
Ratio
Press the PIP ARC button.
?
Press this button
same
watch video
PIP
Press the PIP button to switch
?
at the
picture
appears
as
below.
Component
Video
10:30
4:3
Swapping
the PIP
Moving
16:9
the PIP
Press the SWAP button to
Press the WIN.POSITION button.
Repeatedly press the
position is achieved.
left/right.
the main and sub
exchange
pic-
tures.
Δ / Ε or Φ / Γ button until desired
The sub picture moves up/down or
Video
Component
Component
Video
10:30
10:30
Win. Position
Main Picture
Δ
ΦΓ
Ε
Main Picture Size
Press the ZOOM+/ZOOM- button to
main
picture
Selecting
Adjustment
size when
viewing
enlarge
or
reduce the
the PIP.
Sub Picture
a source
input signal
for the PIP
Press the SUB INPUT button to select the
sub
mode for the
input
picture.
Component
Video
10:30
Zoom In
100
%
Δ
ΦΓ
Ε
?
?
select COMPONENT
PIP Size
sub
?
Press the WIN.SIZE button and then Φ / Γ button to
the sub
picture
PIP
adjust
?
picture mode, main
adjusted simultaneously. With WIN.SIZE
mode, sub picture is adjusted.
is
and sub
480p/720p/1080i,
480p/720p/1080i for main picture, you can
or AV2) and S-VIDEO for sub picture.
In COMPONENT 480i for main picture, you can select RGB1
and RGB2 for sub picture.
(AV1
button in
Main Picture Position
tion with the Δ / Ε
Adjustment
or
Adjust the
Φ / Γ buttons in
Win. Size
Γ
Zoom In
100
Δ
ΦΓ
Ε
22
and RGB2 for
In COMPONENT
Press the ZOOM+/ZOOM- button.
Φ
RGB1
picture.
select VIDEO
size.
With WIN.SIZE button in twin
picture
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO (AV1 or AV2) and S-VIDEO for sub picture.
In VIDEO (AV1 or AV2) and S-VIDEO for main picture, you can
%
main
enlarged
picture posimain
picture.
TWIN Picture
Main Picture Size
Adjustment
Press the TWIN PICTURE button.
?
Each press of TWIN PICTURE button
changes
the
screen
DW1
Sub Picture Size
display
as
DW2
Adjustment
Off
Selecting
sub
button to
a source
for the Twin
picture
Press the SUB INPUT button to select the
Press the WIN.SIZE button.
?
Press the Φ /
?
WIN.POSITION function doesn't
Γ
shown below.
adjust
the sub
picture
size.
input
mode for the
picture.
operate in twin picture
Component
mode.
Video
10:30
?
Win. Size
Φ
Γ
?
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO (AV1 or AV2) and S-VIDEO for sub picture.
In VIDEO (AV1 or AV2) and S-VIDEO for main picture, you can
select COMPONENT
sub
?
Swapping
and RGB2 for
480p/720p/1080i for main picture, you can
or AV2) and S-VIDEO for sub picture.
In COMPONENT 480i for main picture, you can select RGB1
and RGB2 for sub picture.
(AV1
the Twin Picture
Press the SWAP button to
ture in twin
RGB1
In COMPONENT
select VIDEO
?
480p/720p/1080i,
picture.
picture
exchange
the main and sub
pic-
mode.
Component
Component
Video
Video
10:30
10:30
23
External Control Device
-
Connect the RS-232C
control the Monitor 's
-
-
Connect the serial
input jack to an external
functions externally.
port of the control device
RS-232C connection cables
Type
are
of connector; D-Sub
9-pin
to the RS-232C
supplied
(such
jack
on
as a
computer
or an
the Monitor back
A/V control
system)
Pin
1
No connection
panel.
with the Monitor.
male
name
2
RXD
3
TXD
and
1
No.
5
(Receive data)
(Transmit data)
(DTE side ready)
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
RS-232C
not
Setup
control device
(DCE side ready)
(Ready to send)
(Clear to send)
9
6
configurations
7-wire
(Standard
3-wire
configuration
(Not standard)
configuration
RS-232C cable)
PC
PDP
RXD
2
3
TXD
TXD
3
2
RXD
PC
PDP
RXD
2
3
TXD
3
2
RXD
GND
TXD
GND
5
5
GND
GND
5
5
DTR
4
6
DSR
DTR
4
4
DTR
DSR
DSR
6
4
DTR
DSR
6
6
RTS
7
8
CTS
RTS
7
7
RTS
8
CTS
CTS
8
RTS
7
D-Sub 9
CTS
8
D-Sub 9
D-Sub 9
D-Sub 9
Control line
Set ID
-
Use this function to
specify
a
monitor ID number.
1.
Press the MENU button and then Δ / Ε button to select the SPECIAL
2.
Press the Γ button and then Δ /
Ε
menu.
VIDEO
button to select Set ID.
AUDIO
Language
Child lock
Orbiter
TIME
Press the Γ button and then Φ / Γ button to
3.
adjust
Set ID to choose the
White Wash
Set ID
Γ
SPECIAL
OSD Rotate
desired monitor ID number.
SCREEN
4.
?
The
range of Set ID is 1
Refer to 'Real data mapping1' (See
adjustment
~
99.
TWIN
p.29).
Communication Parameters
?
Baud rate
?
Data
?
24
:
115200
length : 8
Parity : None
bits
bps (UART)
?Stopbit:1bit
?
Communication code
:
ASCII code
MENU
Prev.
1
OK Acknowledgement
Command Reference List
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
01. Power
k
a
0~1
Input Select
Aspect Ratio
k
b
0~4
k
c
0~2
04. Screen mute
k
d
0~1
05. Volume mute
k
e
0~1
06. Volume control
k
f
0~64
07. Contrast
k
g
0~64
02.
03.
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
*
k
h
0~64
The Monitor transmits ACK
(acknowledgement)
k
i
0~64
this format when
abnormal data from
10. Tint
k
j
0~64
non-viable functions
11.
k
k
0~64
12. OSD select
k
l
0~1
13. Remote control lock mode
k
m
0~1
14. PIP/Twin
k
n
0~3
Γ To control Power On/Off of the Monitor.
15. PIP size
k
o
0~1
Transmission
16. PIP
k
q
0~3
17. Treble
k
r
0~64
18. Bass
k
s
0~64
19. Balance
k
t
0~64
20. Colour
k
u
0~3
k
v
0~64
Brightness
Sharpness
position
temperature
21. Red
22.
23.
24.
adjustment
Green adjustment
Blue adjustment
PIP input source
25. Orbiter
26. White Wash
27. Orbiter Time
28. Orbiter Pixel
Setting
Setting
01. Power
receiving
or
communication
on
errors.
[k][a][ ][Set ID][ ][Data][Cr]
Data
0
Power Off
:
1
:PowerOn
1
:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data
0
Power Off
:
w
0~64
k
$
0~64
Γ To show Power On/Off.
k
y
0~4
Transmission
j
j
j
j
p
0~1
q
0~1
r
1~FE
0~9
based
(Command:a)
k
s
on
the data is data write
09. Colour
08.
based
time, if the
[k][a][ ][Set ID][ ][FF][Cr]
Data
0
Power Off
:
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
When
setting
the 25
28,
a menu
~
doesn't
display
on
screen.
Data
*
0
Power Off
:
1:PowerOn
In like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feed back presents
status about each function.
Transmission /
Receiving
Protocol
Transmission
02.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]
[Command 2]
[Set ID]
Input
select
Γ To select input
(Command:b) (Main picture input)
source
:
k
You
:
To control PDP set.
SELECT button
:
You
can
adjust
the set ID to choose
desired monitor ID number in
special
can
also select
on
an
for the Monitor.
input
[k][b][ ][Set ID][ ][Data][Cr]
See
Data 0
~
the INPUT
Transmission
menu.
previous page.
Adjustment range is 1 99.
When selecting Set ID '0', every
using
source
the Monitor's remote control.
:RGB1
1
:
2
:
Component (or AV1)
Video (or AV2)
S-Video
3
:
4
:RGB2
3
:
4
:RGB2
connected PDP set is controlled.
*
[DATA]
:
To transmit command data.
Transmit 'FF' data to read status of
command.
*
[Cr]
*[]
:
:
Carriage
Return
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 0
:RGB1
ASCII code '0x0D'
1
:
ASCII code
2
:
'space (0x20)'
Component (or AV1)
Video (or AV2)
S-Video
25
03.
Ratio
Aspect
Γ To adjust the
You
screen
also
can
Ratio
(Aspect
Special
(Command:c) (Main picture format)
06. Volume control
(Command:f)
Γ To adjust volume.
format.
adjust the screen format using the ARC
Control) button on remote control or in the
menu.
You
on
can
also
adjust
volume with the volume buttons
remote control.
Transmission
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
[k][c][ ][Set ID][ ][Data][Cr]
Data
0
:
1
:
2
:
Wide
Data
(16:9)
Normal screen (4:3)
Full screen (Zoom)
screen
:
1
:
2
*
Using
Wide
Data
(16:9)
Normal screen (4:3)
Full screen (Zoom)
:
the PC
mapping1' (See p.29).
[f][ ][Set ID][ ][OK][Data][x]
[c][ ][Set ID][ ][OK][Data][x]
0
Refer to 'Real data
Acknowledgement
Acknowledgement
Data
Min:0~Max:64
*
Min:0~Max:64
screen
input,
07. Contrast
you select either 16:9
or
4:3
screen
aspect ratio.
Γ To adjust
You
can
(Command:g)
screen
also
contrast.
adjust
contrast in the Picture
menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
04. Screen mute
(Command:d)
Γ To select
mute on/off.
screen
Data
Refer to 'Real data
[g][ ][Set ID][ ][OK][Data][x]
[k][d][ ][Set ID][ ][Data][Cr]
1
:
Screen mute
0
:
Screen mute off
on
Data
Min:0~Max:64
(Picture off)
(Picture on)
Acknowledgement
08.
[d][ ][Set ID][ ][OK][Data][x]
Γ To adjust
Data
mapping1' (See p.29).
Acknowledgement
Transmission
Data
Min:0~Max:64
*
1
:
Screen mute
0
:
Screen mute off
on
Brightness (Command:h)
You
(Picture off)
(Picture on)
can
brightness.
adjust brightness
screen
also
in the video
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
05. Volume mute
Γ To control volume
You
also
can
(Command:e)
mute
using
mapping1' (See p.29).
Acknowledgement
mute on/off.
adjust
Refer to 'Real data
the MUTE button
remote control.
on
[h][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
0
:
Volume mute
1
:
Volume mute off
on
09. Colour
(Volume off)
(Volume on)
Acknowledgement
0
1
:
:
Volume mute
You
can
also
screen
adjust
colour.
colour in the video
on
Volume mute off
(Volume off)
(Volume on)
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1' (See p.29).
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
26
menu.
Transmission
[e][ ][Set ID][ ][OK][Data][x]
Data
(Command:i)
Γ To adjust the
Min:0~Max:64
10. Tint
Γ To adjust the
You
14. PIP / Twin
(Command:j)
can
also
screen
adjust
(Command:n)
Γ To control the PIP (Picture In picture).
tint.
tint in the video
You
menu.
can
also control the PIP/DW
ture button
Transmission
on
the remote control
using
or
the PIP
in the
or
Twin
Special
pic-
menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
[k][n][ ][Set ID][ ][Data][Cr]
Red:0~Green:64
*
Refer to 'Real data
mapping1' (See p.29).
Acknowledgement
11.
Data
Sharpness (Command:k)
You
can
also
the video
menu.
mapping1' (See p.29).
:PIP
(Command:o)
Γ To select the PIP picture format.
also select the
can
PIP
picture
format
using
the
the remote control.
on
[k][o][ ][Set ID][ ][Data][Cr]
Data0:
4:3
Data0:
16. PIP
(Command:l)
Γ To select OSD (On Screen Display) on/off.
Transmission
1:16:9
4:3
1:16:9
position (Command:q)
Γ To select sub picture position for PIP.
You
also
can
adjust
WIN.POSITION
[k][l][ ][Set ID][ ][Data][Cr]
:OSDoff
the sub
picture position using the
or in the Special menu.
the remote control
[k][q][ ][Set ID][ ][Data][Cr]
Data
[l][ ][Set ID][ ][OK][Data][x]
:OSDoff
on
Transmission
1:OSDon
Acknowledgement
Data0
3:DW2
[o][ ][Set ID][ ][OK][Data][x]
Min:0~Max:64
Data0
2:DW1
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD select
3:DW2
Transmission
Min:0~Max:64
Acknowledgement
Data
:
1
WIN.SIZE
Refer to 'Real data
2:DW1
PIP/DW off
0
You
[k][k][ ][Set ID][ ][Data][Cr]
*
:PIP
15. PIP Size
sharpness.
adjust sharpness in
screen
Transmission
Data
:
1
[n][ ][Set ID][ ][OK][Data][x]
Red:0~Green:64
Γ To adjust the
PIP/DW off
0
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Data
1:OSDon
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
on screen
on screen
on screen
up
on screen
Acknowledgement
13. Remote control lock mode
Γ To lock the front panel controls
on
(Command:m)
[q][ ][Set ID][ ][OK][Data][x]
Data 0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
the monitor and remote
control.
Transmission
down
on screen
on screen
on screen
up
on screen
[k][m][ ][Set ID][ ][Data][Cr]
Data
0
:
Lock off
1:Lockon
You
[m][ ][Set ID][ ][OK][Data][x]
Data
If
0
:
you're
Lock off
not
use
1:Lockon
the remote
When main power is
(Command:r)
Γ To adjust treble.
Acknowledgement
*
17. Treble
on/off,
control,
set this mode.
remote control lock is released.
can
also
adjust
treble in the audio
menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1' (See p.29).
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
27
18. Bass
22. Green
(Command:s)
Γ To adjust bass.
You
can
also
Adjustment (Command:w)
Γ To adjust green in colour temperature.
adjust
bass in the audio
menu.
Transmission
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
[k][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1' (See p.29).
Refer to 'Real data
mapping
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
[s][ ][Set ID][ ][OK][Data][x]
Data
Data
2'
(See p.29).
Acknowledgement
Min:0~Max:64
Min:0~Max:64
23. Blue
19. Balance
(Command:t)
Transmission
Γ To adjust balance.
You
can
also
adjust
balance in the audio
menu.
[k][$][ ][Set ID][ ][Data][Cr]
Data
Transmission
Min:0~Max:64
*
[k][t][ ][Set ID][ ][Data][Cr]
Data
Refer to 'Real data
Refer to 'Real data
mapping
2'
(See p.29).
Acknowledgement
Min:0~Max:64
*
Adjustment (Command:$)
Γ To adjust blue in colour temperature.
[$][ ][Set ID][ ][OK][Data][x]
mapping1' (See p.29).
Data
Min:0~Max:64
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
24. PIP
Min:0~Max:64
input
select
Γ To select input
(Command:y)
for sub
source
picture
in PIP mode.
Transmission
20. Colour
temperature (Command:u)
Γ To adjust colour temperature.
You
can
also
adjust
[k][y][ ][Set ID][ ][Data][Cr]
Data
CSM in the video
menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data
0: Normal
1: Cool
2: Warm
3: User
21. Red
RGB1
:
Video
4
:RGB2
(or AV2)
1
:
Component (or AV1)
3
:
S-Video
Acknowledgement
Data
[u][ ][Set ID][ ][OK][Data][x]
0: Normal
:
2
[y][ ][Set ID][ ][OK][Data][x]
Acknowledgement
Data
0
1: Cool
2: Warm
3: User
Adjustment (Command:v)
0
:
RGB1
2
:
Video
4
:RGB2
25. Orbiter
(or AV2)
1
:
Component (or AV1)
3
:
S-Video
(Command:p)
Γ To adjust red in colour temperature.
Transmission
Γ To control the orbiter function on/off.
[k][v][ ][Set ID][ ][Data][Cr]
Transmission
Data
[j][p][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
*
Refer to 'Real data
mapping
2'
(See p.29).
Data
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
:
Orbiter off
1
:
Orbiter
on
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
Data
28
0
0
:
Orbiter off
1
:
Orbiter
on
26. White Wash
(Command:q)
Γ To control the white wash function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
0
:
White Wash off
1
:
White Wash
on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data
0
:
White Wash off
1
:
White Wash
27. Orbiter Time
on
Setting (Command:r)
Γ To adjust orbiter operation time
term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data
Min:1~Max:FE
*
Refer to 'Real data
mapping1'
as
shown below.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Data
Min:1~Max:FE
28. Orbiter Pixel
Setting (Command:s)
Γ To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:9
*
Refer to 'Real data
mapping1'
as
shown below.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data
*
Min:0~Max:9
Real data
mapping
1
*
Real data
0
:Step0
A
:Step10(SetID10)
A:-8
F :Step15(SetID15)
10:Step16(SetID16)
2D: -1
mapping
2
0:-10
5:-9
32: 0
37: +1
64
:
Step
100
5F: +9
64: +10
29
check list
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
on.
No sound
?
Plug
another
power cord
product's
was
power cord into the wall outlet where the Monitor's
plugged
in.
?
Press the VOLUME
?
Sound muted? Press MUTE button.
?
Check to
(Γ)
button.
Picture OK &
No sound
see
if there is any
remote control
The remote control
?
doesn't work
Check to
?
Install
or
Poor colour
Poor
are
between the Plasma
Display
installed with the correct
new
batteries.
(Refer
to
and the
polarities. (Refer
menu
and press the VOLUME
(Γ)
button.
certain distance between the Monitor and the VCR.
Keep
?
Activate any function to restore the
a
one
of the
the
?
Adjust
?
Typical
screen
for
more
than 5
Balance in the AUDIO
brightness
minutes,
menu.
the
(Refer
of the
screen
to
picture. (If
still
gets dark.)
p.16)
speakers
sound from the
Monitor
30
(Refer
p.15)
picture
output from
Strange
to
p.11)
?
on
No
if the batteries
Select Colour in the VIDEO
to
or
object
obstruction.
p.11)
?
No
see
causing
sound due to normal Monitor
operation,
Monitor is not
faulty.
picture
is
Product
specifications
MODEL
MT-50PZ40V/A/B/K/R/S
MZ-50PZ42V/A/B/K/R/S
MT-50PZ41V/A/B/K/R/S
MZ-50PZ43V/A/B/K/R/S
MT-50PZ43V/A/B/K/R/S
Width
(inches
/
mm)
48.2 / 1223
Height (inches
/
mm)
28.9 / 734
Depth (inches
/
mm)
4.1 / 105
/
99.2 / 45
Weight (pounds
Power
kg)
requirement
AC100-240V
Resolution
1366
Colour
specifications
shown above may be
(Dot)
0~40°C
Humidity (In operation)
The
768
16,770,000 (256 steps of each R, G and B)
Temperature (In operation)
?
x
50/60Hz
~
under 80%
changed
without notice for
quality improvement.
31
Download PDF