LG | MT-50PZ41 | LG MT-50PZ41 Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
MT-50PZ41
MZ-50PZ43
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0351A
cover
require
(RF00CA,
and quote this infor-
service.
067Y TX,
373-026H)
LG Plasma Monitor
What is
If
voltage
Plasma
a
is
inputted
Display
to gas in
?
glass panels,
ultraviolet rays is
moment, light is emitted. A Plasma Display is
160°
-
Wide
A Plasma
angle range
Display provides
a
outputted and fused with a fluorescent
generation flat Display using this phenomenon.
next
substance. At this
of vision
than 160°
more
angle
range of vision
so
that you
can
get
a
picture
without distortion from
any direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
The
screen
screen
of
a
Plasma
Display
Multimedia Plasma
A Plasma
and
Display
can
is 50"
so
that you
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
a
computer
so
that you
can use
it
as a screen
for
conference, game, internet
so on.
The
explanation
The PDP which is the
occur
about colored dots may be present
display
device of this
product
is
composed
in the manufacture of the PDP. Several colored dots visible
on
PDP
screen
of 0.9 to 2.2 million cells and
on
the
screen
would be
a
few cell defects
acceptable,
can
in line with other
PDP manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
responds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
which
cor-
WARNING
This is Class A
case
the
user
product. In a domestic environment this product
may be required to take adequate measures.
may
cause
radio interference in which
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Contents
SafetyInstructions................................................4
Equipment
Connections and
Setup
ControlsoftheMonitor.............................................6
WatchingExternalEquipments.......................................7
DisplayableMonitorSpecification....................................10
Controlsoftheremotecontrol.......................................11
Installationoftheattachmentstand...................................13
Monitorinstallation...............................................13
Basic Features Setup and Operation
TurningontheMonitor............................................14
Menulanguagesetup.............................................14
VIDEO Menu
PSM(PictureStatusMemory).......................................15
AdjustingAutoColorControl........................................15
ManualColorTemperatureControl...................................15
ManualpictureControl............................................15
AUDIO Menu
SSM(SoundStatusMemory)........................................16
AVL(AutoVolumeLeveler).........................................16
AdjustingSound.................................................16
TIME Menu
SettingtheClock................................................17
SettingtheOn/OffTimer...........................................17
AutoOff.......................................................17
SleepTimer....................................................17
SPECIAL Menu
Keylock.......................................................18
Orbiter........................................................18
WhiteWash....................................................18
SCREEN Menu
Autoadjustment.................................................19
SettingPictureFormat............................................19
SplitZoom.....................................................19
ScreenPosition.................................................20
ManualConfigure................................................20
ScreenAdjustments..............................................20
Initializing(Resettofactoryvalue)....................................20
PIP Function
WatchingPIP...................................................21
PIPAspectRatio.................................................21
MovingthePIP..................................................21
MainPictureSizeadjustment.......................................21
PIPSize.......................................................21
SwappingthePIP................................................21
SelectingasourceinputsignalforthePIP.............................21
MainPicturePositionAdjustment....................................21
TWIN Picture
MainPictureSizeAdjustment.......................................22
SubPictureSizeAdjustment........................................22
.22
SelectingasourceinputsignalfortheTwinPicture.
SwappingtheTwinPicture.........................................22
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ExternalControlDeviceSetup.....................................23
Others
Troubleshootingchecklist..........................................30
Productspecifications.............................................31
After
reading
this
manu-
al, keep it in the place
where the
always
user can
contact
easily.
3
Instructions
Safety
W
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
cause a
fire.
In
use
room or
any
This may
-
the Monitor in
place
cause a
damp place such as a bathit is likely to get wet.
where
fire
could
or
give
an
electric shock.
cable
antenna
building
to
and
or
This may
Do
not
outside
cause a
attempt
This may
shock.
wall outlet and contact
service center.
fire
to
Contact your dealer
damaged
inside the Monitor and could
cause
or
could
give
service
or
an
the
electric shock.
Monitor
yourself.
service center.
damaged
the Monitor
During
or
could
give
an
electric
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
-
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
strange smell from the Monitor,
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
or
your dealer
-
Bend
of smoke
,unplug it from the
-
Do not
case
switch it off
danger
a
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
of
electric shock caused
-
If
grounding
methods
breaker should be
are
possible,
not
employed
and installed
separate circuit
a
by
qualified
a
elec-
trician.
-
Do not connect
ground
to
rods
telephone wires, lightning
or
gas
pipe.
Power
supplier
Short-circuit
breaker
Do not
placing anything containing liquid
on
top of
the Monitor.
-
This may
cause a
Do not insert any
-
This may
Do not
-
or
could
cause
use
This may
shock.
give
an
or
could
serious
injury
give
on
to
a
an
the Monitor.
4
This set is
or
water the Monitor while
cause
damaged
vent.
electric shock.
child
the Monitor
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
Do not
-
cause a
fire
or
adult.
cleaning.
could
give
an
electric
only
supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
damage
or
death.
of the
product.
Take
care
of
under
danger that may happen
specific condition.
NOTE
This
plasma display is designed
zontally (wide viewing).
Never touch the power
-
This may
cause an
plug with
to be mounted hori-
-
a
This may
Do not
wet hand.
aged
electric shock.
like
objects
a
plug
the
or
heater.
cause a
fire
or an
electric shock.
when the power cord or the plug is damconnecting part of the power outlet is
loose.
Disconnect from the mains and
tions before
Do not
as a
-
all
connec-
-
This may
cause a
fire
or an
electric shock.
moving.
place the Monitor
bookcase
Ventilation
remove
in
a
built-in installation such
rack.
or
Dispose of used batteries carefully
eating them.
to
protect
a
child
from
-
In
case
that it eats them, take it to
see a
doctor
immediately.
required.
When
moving the Monitor assembled with speakers
holding the speakers.
do
not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
This may
shock.
cause
damaged
the Monitor
Contact the service center
When
to
-
installing the Monitor on
place the edge of its stand.
table,
a
be careful not
injury
to
could
a
year to clean the
give
an
electric
internal part of the Monitor.
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
once
or
Accumulated dust
can cause
mechanical failure.
a
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
Do not
place
an
outside antenna in the
head power lines
or
vicinity of overother electric light or power cir-
screen.
-
If not, eyes will strain.
cuits.
-
This may
cause an
Unplug the Monitor
electric shock.
from the wall outlet when it is left
unattended and unused for
-
Accumulated dust may
deterioration or electric
Only
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
antenna
touching
-
an
outside
power lines to keep the former from
the latter even when the antenna falls.
This may
Do not
-
enough distance between
and
cause an
pull the
This may
electric shock.
cord but the
cause a
plug
when
unplugging.
fire.
Ensure the power cord doesn't trail
across
any hot
5
Controls of the Monitor
<Front Panel Controls>
VOL.
MENU
ON/OFF
INPUTSELECT
INPUT SELECT button
Power
standby indicator
Illuminates red in standby
mode
Main power button
MENU button
Illuminates
green
when the Monitor is turned
VOLUME
(Φ,Γ) buttons
Remote control
sensor
Δ,Ε buttons
on
<Back Panel>
Y
R AUDIO L (MONO)
()R ()
EXTERNAL SPEAKER (8Ω)
AC INPUT
AUDIO
INPUT
AV INPUT
S-VIDEO
PB
PR
COMPONENT
(DVD/DTV INPUT)
R AUDIO L
()L ()
AUDIO
INPUT
RGB1 OUTPUT
(PC/DTV OUTPUT)
AUDIO
INPUT
RGB1 INPUT
(PC/DTV INPUT)
RGB2 INPUT
RGB INPUT)
(DIGITAL
RS-232C INPUT
(CONTROL/SERVICE)
EXTERNAL SPEAKER (8Ω)
AUDIO INPUT
AV INPUT
RS-232C
RGB2 INPUT
AUDIO INPUT
INPUT
COMPONENT
RGB1 INPUT
(DVD/DTV INPUT)
AUDIO INPUT
Connection to AV
equipment
INPUT
(PC/DTV INPUT)
D-Sub 15
6
(DIGITAL
RGB INPUT)
S-VIDEO
pin
cable included with the Monitor.
Connection to PC
External
Watching
Equipments
<Back Panel>
MT-50PZ41 series
()
AUDIO
()
1
Y
(MONO)
2
PB
PR
AUDIO
3
4
()
()
()
()
5
MZ-50PZ43 series
()
()
3
1.
EXTERNAL SPEAKER
(8
ohm
output)
optionally available speaker.
information, refer to 'Speaker & Speaker
4.
Connect this terminal to the
*For further
RGB1
OUTPUT(PC/DTV OUTPUT)/AUDIO IN SOCKETS
INPUT(PC/DTV INPUT)/RGB2 INPUT(DIGITAL
INPUT) IN SOCKETS
RGB1
RGB
stand' manual.
Connect the monitor
output socket of the PERSONAL
COMPUTER to this socket.
2.
POWER INPUT SOCKET
This Monitor
is
as
apply
3.
operates
indicated
as
on an
AC mains
inside back
cover
supply,
the
voltage
of this manual. Never
5.
RS-232C
INPUT(CONTROL/SERVICE)
Connect it to the RS-232C socket
on
SOCKET
the PC.
DC power to the Monitor.
AV/S-VIDEO/COMPONENT(DVD/DTV INPUT)/AUDIO
INPUT SOCKETS
EURO SCART SOCKET
Note
:
equipped
The
on
interface
board(AP-50EA40/41)
is
not
MT/MZ-50PZ41/43 series models. Contact
your dealer for
buying
this
optional item.
7
VCR (When the Interface board is installed.)
Watching
The interface
board(AP-50EA40/41)
is not
When
connecting the Plasma Monitor with
Audio(L) white, Audio(R) -red).
Connect the VIDEO INPUT socket(yellow)
equipped
external
MT/MZ-50PZ41/43 series models.
on
match the colors of
equipments,
connecting ports (Video
-
yellow,
-
with the BNC-RCA adapter to the AV INPUT socket of the set.
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Avoid having a fixed image remain on the screen for
4:3 picture format or if a CH label is present;
the fixed image may remain visible on the screen.
a
long period
of time.
Typically
a
frozen still
1. Press INPUT SELECT button on the remote control and select Video, AV1 or AV2.
(When connecting with S-Video, select the S-Video)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's
Watching
board(AP-50EA40/41)
subscribing
to
a
is not
equipped
cable TV service from
This monitor cannot
ming.
from
a
VCR,
manual)
Cable TV (When the Interface board is installed.)
The interface
After
picture
display
TV
a
local
programming
on
MT/MZ-50PZ41/43 series models.
and
provider
without
a
installing
can watch cable TV programcable TV converter box connected to the
converter, you
a
TV tuner device
or
monitor.
1. Press INPUT SELECT button on the remote control and select
2. Tune to cable sevice provided channels using the cable box.
Watching
Or,
or
AV2.
external AV
The interface
When
Video, AV1
source (When the Interface board is installed.)
board(AP-50EA40/41) is not equipped on MT/MZ-50PZ41/43
connecting
the Plasma Monitor with external
equipments,
series models.
match the colors of
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
connecting ports.
1. Press INPUT SELECT button on the remote control of the monitor to select Video, AV1 or AV2.
2. Operate the corresponding external equipment. (See external equipment operating guide.)
DVD (When the Interface board is installed.)
The interface board(AP-50EA40/41) is not equipped on MT/MZ50PZ41/43 series models.
Watching
?
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
How to connect
Connect DVD video
INPUT)
Or,
and audio
inputs
inputs
to
Y, PB, PR of COMPONENT (DVD/DTV
below.
Component ports
of the
Monitor
to Audio sockets of AV INPUT.
connect the Euro scart socket of the VCR to the Euro scart socket
of the set.
Video
How to
select
8
output ports
of DVD
use
1. Press INPUT SELECT button
2.
YPBPR
on
the remote control of the monitor to
Component, AV1 or AV2.
Try this after turning on the DVD player.
(Refer to the DVD player's manual for operating instructions.)
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
Connecting
You
PC
enjoy
can
vivid
picture
and sound with
connecting
a
PC with the Monitor.
to Connect a PC to your Monitor
If the resolution of PC is over UXGA, there will be no picture
Setup Instructions
-
Connect the
or
-
-
-
-
-
-
the Monitor.
cable from the monitor
cable not included with the
-
on
output port of the PC to the RGB1 INPUT(PC/DTV INPUT) port of the Monitor
the signal cable from the DVI output port of the PC to the RGB2 INPUT(DIGITAL RGB INPUT) port of the Monitor. (DVI
signal
Monitor)
Connect the audio cable from the PC to the Audio
ports of the Monitor. (Audio cables not included with the Monitor)
using a sound card, adjust PC sound properly.
This monitor apply a VESA Plug and Play Solution. When connecting plug and play compatible system (PC) with monitor,
other setting is unnecessary. This monitor notify EDID data to PC system by using DDC protocol with the consequence
that a PC can compose automatically to use this monitor.
DDC protocol preset in RGB1 (Analog RGB), RGB2 (DVI,Digital RGB) mode.
Do a monitor setting to this product for Plug and Play functionally.
If a graphic card don't output analog RGB and digital RGB simultaneously, connect RGB1 INPUT (PC/DTV INPUT) or
RGB2 INPUT (DIGITAL RGB INPUT) port of the Monitor to PC.
If a graphic card output analog RGB and digital RGB simultaneously, set the monitor in one of the RGB1 or RGB2 then
other mode is set Plug and Play monitor automatically.
The monitor misunderstand 640x480, 60Hz as DTV 480p based on graphic card. In this case, change the screen scanning rate of graphic card.
In
case
of
PC Setup
1. Turn on
2. Turn on
3. Use the
4. Set the
the PC and press the ON/OFF button on the Monitor to apply power to it.
the display by pressing the the POWER button on the Monitor's remote control.
INPUT SELECT button on the remote control to select the RGB1 or RGB2 input
resolution output of the PC to SXGA or under (1280 x 1024, 75Hz).
?
To
?
For further information
?
To avoid
?
To avoid
?
Connect
ing
prevent picture noise, place the VCR
more
source.
than 50cm away from the Monitor.
regarding cable TV service, contact your local cable TV service provider(s).
picture noise (interference), leave an adequate distance between the VCR and monitor.
burning an image on the Monitor screen, don't have a still picture on the screen for a long period time.
PC to the RGB1 INPUT(PC/DTV INPUT) or RGB2 INPUT(DIGITAL RGB INPUT) port of the Monitor after chang-
the resolution of PC.
9
Monitor
Displayable
<
RGB1 mode
Resolution
Specification
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
DDC
640x350
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
56.000
90.00
64.016
100.00
DDC
800x600
31.469
70.08
37.927
85.03
49.725
74.55
o
48.363
60.00
o
31.469
59.94
o
35.000
66.66
o
56.476
70.06
o
60.023
75.02
37.861
72.80
o
o
68.677
84.99
37.500
o
75.00
o
54.348
60.05
o
43.269
85.00
o
63.995
70.01
o
45.913
90.03
67.500
75.00
o
53.011
100.04
77.487
85.05
o
64.062
120.00
1152x870
68.681
75.06
o
35.156
56.25
o
1280x960
75.000
75.00
o
37.879
60.31
o
48.077
72.18
o
63.981
60.02
o
46.875
75.00
o
79.976
75.02
o
53.674
85.06
o
o
832x600
720x400
1024x768
640x480
1152x864
800x600
1280x1024
(Synchronization input
<
RGB2 mode
Resolution
form
:
separate)
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
DDC
Resolution
832x600
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
DDC
49.725
74.55
o
48.363
60.00
o
56.476
70.06
o
60.023
75.02
o
640x350
31.469
70.08
37.927
85.03
31.469
59.94
o
68.677
84.99
o
35.000
66.66
o
54.348
60.05
o
37.861
72.80
o
63.995
70.01
o
37.500
75.00
o
67.500
75.00
o
43.269
85.00
o
77.487
85.05
o
35.156
56.25
o
68.681
75.06
o
37.879
60.31
o
60.000
60.00
o
48.077
72.18
o
75.000
75.00
o
46.875
75.00
o
63.981
60.02
o
53.674
85.06
o
o
1024x768
720x400
640x480
1152x864
800x600
(Synchronization input
10
form
:
separate)
1152x870
1280x960
1280x1024
Controls of the remote control
-
When
using
the remote control aim it at the remote control
sensor
of the Monitor.
POWER
1.
switches the set
from
on
standby
or
off to
standby.
SLEEP
2.
sets the
PSM
3.
sleep
timer.
(Picture Status Memory)
preferred picture setting.
recalls your
POWER
ARC
(Aspect Ratio Control)
changes the picture format.
4.
1
SLEEP
INPUT SELECT
13
2
PSM
PIP
5.
SSM
3
14
ARC
switches the sub
PIP ARC
15
4
PIP
off.
alternates between main and sub
16
SWAP
on or
SWAP
6.
TWIN PICTURE
5
picture
picture.
SUB INPUT
6
17
MENU
7.
MENU Button
selects a menu.
8.
Δ/Ε
selects
MUTE
7
18
OK
VOL
Φ
VOL
8
/
Γ
a
programme
or a menu
item.
(Volume Down/Up)
adjusts
adjusts
the volume.
menu
settings.
OK
the current mode.
displays
NUMBER BUTTONS
9.
1
2
3
4
5
6
7
8
9
10. VCR BUTTONS
control
9
video cassette recorder.
a
11. WIN. SIZE
adjusts
0
the sub
picture
size.
12. ZOOM-/ZOOM+
13. INPUT SELECT BUTTON
POWER
10
STOP
P/STILL
PLAY
FF
14. SSM
REW
REC
WIN.SIZE
WIN.POSITION SPLIT ZOOM
11
12
ZOOM
-
ZOOM
+
(Sound Status Memory)
preferred sound setting.
recalls your
15. PIP ARC
changes
19
20
the
picture
format of PIP.
16. TWIN PICTURE
17. SUB INPUT
selects the
input
mode for the sub
picture.
18. MUTE Button
switches the sound
on or
off.
19. SPLIT ZOOM
enlarge
the
screen
with
regular
ration.
20. WIN.POSITION
relocates the sub
Installing
picture
in clockwise direction.
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
Apply
new
the back side and
polarity.
two 1.5V alkaline batteries of AAA
used batteries with
?
cover on
type. Don't mix the
batteries.
Install the batteries with the correct
polarities.
11
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
PIPARC
PIP
TWINPICTURE
SWAP
SUB INPUT
MENU
MUTE
VOL
1
OK
VOL
2
3
4
5
7
8
6
9
0
POWER
REW
STOP
P/STILL
PLAY
FF
LG TV
1.5V
REC
WN.SIZE
ZOOM
WIN.POSITION SPLITZOOM
-
1.5V
ZOOM+
ASmark
Owner's Manual
D-sub 15
Optional
-
pin
cable
BNC-RCA
Alkaline batteries
Remote control handset
Power cord
DVI cable
Simple
adapter
monitor stand
Extras
Optional
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
-
Contract your dealer for
Tilt wall
mounting
Desktop
buying
these items.
bracket
stand
mounting
bracket
Ceiling mounting
bracket
Desktop Speaker
Speakers
Video cables
12
Wall
PC audio cables
stand
Installation of the attachment stand
1. Make
sure
to
secure
the attachment stand to the dis-
play platform using M8 bolts (commercially available)
25mm longer than the thickness of the platform.
Front
Rear
665
mm
2. Match the holes of monitor and stand.
3. Use the two
the monitor.
(2) bolts provided to attach the stand to
Tighten each bolt securely in the clockwise
direction shown above.
The monitor
should be
weigh 45kg and its thinness makes
performed by two or more persons.
it unstable.
Therefore, unpacking and installation
Monitor Installation
?
The Monitor
?
Install this monitor
To install
a.
as
can
wall
be installed in various ways such as wall mounting type, desktop
only in a location where adequate ventilation is available.
To install
mounting type
Wall mount minimum allowable clearances for
adequate
as
type,
etc..
desktop type
b. Pedestal mount minimum allowable clearances for
ventilation
adequate
ventilation
10cm
10cm
3cm
3cm
10cm
10cm
10cm
10cm
10cm
6cm
13
Turning
When
-
Turning
1.
2.
using the
on
control,
remote
the Monitor
Connect power cord
Press the
the Monitor
on
just
aim it at its
after installation
ON/OFF button
the Monitor. At this moment, the Monitor is switched to
on
the Monitor
on
then the Monitor will be switched
1.
Press the
Press the
the
POWER,
1.
The
3.
ON/OFF button
on
14
the Monitor
the Monitor
on
the Monitor.
on
the level of sound and
volume(Φ)
be
displayed
on
the
screen
Δ
/
in desired
Ε
language.
First select your
button to select the
menu.
Press the
Γ
button and then
Press the
Γ
button and then
Δ
Δ
button to select
Ε
/
/
Ε
From this
point
language
of your choice.
on, the
on-screen
Language.
button to select your desired
Press the MENU button.
display
will be
presented
on
the Monitor
button decreases the level of sound.
language.
4.
on
connected)
the Monitor to turn
on
Press the MENU button and then
SPECIAL
2..
is still
language setup
menu can
mode. Press the
the remote control and
the Monitor and then press the INPUT SELECT button
INPUT SELECT button on the remote control to turn on the Monitor.
Adjusting volume level
Volume(Γ) button increases
Menu
-
ON/OFF button
standby
on
on.
(power cord
ON/OFF button
POWER, INPUT SELECT button
If the Monitor is turned off with the remote control and also the ON/OFF button
?
?
the Monitor
press the
or
If the Monitor is turned off with the
?
2.
on
the Monitor.
correctly.
INPUT SELECT button
Turning
sensor on
in the
language.
or
press
VIDEO Menu
PSM
-
1.
(Picture Status Memory)
This function
adjusts
the PDP to the best
Press the PSM button to select the
Each press PSM button
?
picture
picture
changes
the
You
?
The
-
1.
screen
display
setup.
shown below.
as
User
also select Dynamic, Mild or User in the VIDEO menu.
picture Dynamic and Mild are programmed for good picture reproduction
cannot be changed.
can
Adjusting
-
appearance
Mild
Dynamic
?
appearance.
at the
factory
Auto Color Control
Adjustments also affect the color temperature if other input sources. Readjust
(RGB) if necessary.
To initial values (reset to default settings), select the 'Normal'.
Press the MENU button and then
Δ
button to select the VIDEO
Ε
/
color
temperature for PC input
VIDEO
PSM
CSM
menu.
Γ
AUDIO
Color
2.
and
Press the
Γ
button and then
/
Δ
Ε
TIME
button to select CSM.
SPECIAL
3.
Press the
4.
Press the MENU button.
Δ
/
Ε
button to select the desired color
temperature.
100
Brightness
60
colour
50
Sharpness
50
Tint
Normal
Cool
Temp.
Contrast
Warm
User
0
SCREEN
TWIN
MENU
?
Each press of
Δ
/
Ε
button
changes
Normal
Manual Color
-
1.
You
can
the
screen
display
Cool
as
shown below.
Warm
User
Temperature Control(User option)
change red,
green and blue to
Press the MENU button and then
adjust
temperature you prefer.
button to select the VIDEO
Ε
/
Δ
color
3.
Press the
AUDIO
Γ
Press the
Γ
button and then
button and then
Δ
Δ
button to select the Color
Ε
/
/
Ε
button to select color
Temp..
tempera-
ture items.
4.
5.
Press the
The
Manual
-
1.
PSM
Color
SPECIAL
60
Colour
50
Sharpness
50
Tint
Φ
/
Γ
button to make
appropriate adjustments.
0
0
Blue
0
0
MENU
You
PIP
adjustment
Prev.
picture
range of Red, Green and Blue is -10~+10.
control
(User option)
can adjust picture contrast, brightness, color, sharpness
settings are not adjustable.
Press the MENU button and then
Δ
/
Ε
and tint to the levels you
button to select the VIDEO
prefer.
VIDEO
PSM
AUDIO
Press the
Γ
button and then
Δ
/
button to select the desired
Ε
pic-
ture item.
Press the
TIME
SPECIAL
Γ
button and then
adjustments.
4.
Red
Green
TWIN
CSM
Color
3.
100
Brughtness
SCREEN
menu.
2.
Γ
Temp.
Contrast
TIME
Press the MENU button.
?
-
VIDEO
CSM
menu.
2.
Prev.
Φ
/
Γ
button to make
appropriate
SCREEN
Temp.
Contrast
70Γ
Brightness
60
Colour
50
Sharpness
50
Tint
0
TWIN
MENU
Prev.
Press the MENU button.
15
AUDIO Menu
SSM
-
1.
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content.
Press the SSM button to select the
Flat
?
AVL
-
1.
You
(Auto
Volume
setup.
appearance
Movie
Speech
also select
can
picture
Flat, Speech, Movie, Music
or
Music
User in the AUDIO
User
menu.
Leveler)
This feature maintains
an
volume
equal
Press the MENU button and than
Δ
level;
Ε
/
even
if you
change
channels.
button to select the AUDIO
menu.
VIDEO
SSM
AUDIO
2.
Press the
Γ
3.
Press the
Γ
button and then
Δ
/
Ε
button to select AVL.
button and then
Δ
/
Ε
button to select On
TIME
AVL
Γ
Treble
50
Bass
50
Balance
0
SPECIAL
or
Off.
SCREEN
4.
Press the MENU button.
TWIN
MENU
Adjusting
1.
Sound
(Manual Setting)
Press the MENU button and then
Δ
/
Ε
button to select the AUDIO
Press the
AUDIO
Γ
button and then
Δ
/
Ε
button to select the desired
Press the
Γ
16
Treble
50Γ
Bass
50
0
SPECIAL
button and then
adjustments.
4.
TIME
AVL
Balance
sound item.
3.
VIDEO
SSM
menu.
2.
Prev.
Press the MENU button.
Φ
/
Γ
button to make
appropriate
SCREEN
TWIN
MENU
Prev.
On
Off
TIME Menu
the Clock
Setting
If current time
-
setting
is erased
by
Press the MENU button and then
1.
power failure
a
/
Δ
Ε
or
if TV is
unplugged,
reset the clock.
button to select the TIME
VIDEO
menu.
AUDIO
Clock
Γ
:
--
--
Off Timer
On Timer
2.
Press the
Γ
button and then
Δ
/
Ε
button to select Clock.
3.
Press the
Γ
button and then
Δ
/
Ε
button to
adjust
the hour.
4.
Press the
Γ
button and then
Δ
/
Ε
button to
adjust
the minute.
5.
Press the MENU button.
TIME
Auto. Off
SPECIAL
SCREEN
TWIN
Timer function
operates only if
current time has been
Off-timer function overrides on-timer function if
-
The monitor must be in
-
they
already
are
set.
set to the
same
time.
mode for the On timer to work.
standby
Press the MENU button and then
1.
/
Δ
Ε
button to select the TIME
VIDEO
Clock
menu.
Press the
Timer.
2.
Prev.
the On/Off Timer
Setting
-
MENU
button and then
Γ
Off Timer
TIME
Auto. Off
On Timer
button to select Off Timer or On
Ε
/
Δ
AUDIO
Γ
Off
On
12
:
00
SPECIAL
Press the
3.
button and then
Γ
/
Δ
button to select On.
Ε
Vol.
30
SCREEN
4.
Press the
Γ
button and then
Δ
/
Ε
button to
adjust
the hour.
5.
Press the
Γ
button and then
Δ
/
Ε
button to
adjust
the minute.
Only On Timer function;
adjust volume level.
6.
Press the
TWIN
button and then
Γ
Δ
/
Ε
MENU
Prev.
button
to
Press the MENU button.
7.
To cancel Off/On Timer function
-
Press the
Ε
/
Δ
button to select Off in
step
3.
Auto Off
If there is
-
1.
no
input signal,
the monitor turn off
Press the MENU button and then
Δ
/
Ε
automatically
after 10 minutes.
button to select the TIME
VIDEO
Clock
menu.
AUDIO
Off Timer
TIME
Auto. Off
On Timer
2.
Press the
Γ
button and then
Δ
3.
Press the
Γ
button and then
Δ
4.
Press the MENU button.
/
Ε
button to select Auto. Off.
/
Ε
button to select On or Off.
Γ
Off
On
SPECIAL
SCREEN
TWIN
Sleep
timer turns the monitor off at the
preset time.
Press the SLEEP button to select the number of minutes. The
-
Prev.
Timer
Sleep
-
MENU
followed
by 10, 20, 30, 60, 90, 120,
180 and 240. The timer
zz
display
begins to count
---
Min will appear on the screen,
down from the number of min-
utes selected.
When the
-
screen
sleep time you want is displayed on the
display disappears and sleep time is set.
a.
To check the
b.
To cancel the
c.
If you turn
screen, don't press the
sleep
button. After 20
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
seconds, the
Min appears.
17
SPECIAL Menu
Key
-
-
lock
The monitor
can
This feature
can
be set up so that it can only be used with the remote control.
be used to prevent unauthorized viewing.
Press the MENU button and then
1.
CIAL
/
Δ
button to select the SPE-
Ε
VIDEO
Language
menu.
AUDIO
Key
lock
On
Γ
Orbiter
Press the
2.
Press the
3.
button and then
Γ
Γ
button and then
Key lock.
button to select On
Ε
/
Δ
button to select
Ε
/
Δ
or
TIME
Set ID
Off.
SPECIAL
SCREEN
Press the MENU button.
4.
TWIN
-
-
-
The
MENU
Prev.
display Key lock will not appear on the screen if any button on the front panel is pressed.
programmed to remember which option it was last set to event if you turn the monitor
This monitor
In
Key lock 'On',
tor
-
Off
White Wash
if the monitor is turned off with the remote
POWER and INPUT SELECT
or
With the
while
Key lock On, the display
viewing the monitor.
the moni-
on
the remote control.
on
'
off.
control, press the INPUT SELECT button
Key
lock' appears
the
on
screen
if any button
the front
on
panel
is
pressed
Orbiter
-
Avoid
keeping
a
fixed
image
remain
PC/video game set displayed
when you change the image.
-
To avoid
:Right
-
1.
a
permanent image
Right
on
This is the function to
prolong
screen
screen
hour till
Δ
having
/
Ε
a
for
long period
a
prolonged periods
Downside
Press the MENU button and then
CIAL
for
the screen, the screen will
Left
Left
on
Downside
the Monitor's
on
the
fixed
image
move
of time. A frozen still
will result in
an
picture from
image ghost remaining even
every 2 minutes.
Upside
Upside
but it doesn't avoid
button to select the SPE-
permanent image perfectly.
VIDEO
Language
menu.
AUDIO
Key
lock
Orbiter
2.
Press the
Γ
button and then
button to select Orbiter.
Ε
/
Δ
TIME
Γ
On
Off
White Wash
Set ID
3.
Press the
4.
Press the MENU button.
Γ
button and then
Ε
/
Δ
button to select On
or
Off.
SPECIAL
SCREEN
TWIN
MENU
Prev.
White Wash
-
-
1.
This is the function to
remove
permanent image
Set White Wash 'On' until fixed
Press the MENU button and then
CIAL
on
the
screen.
image disappears.
Δ
/
Ε
button to select the SPE-
VIDEO
Language
menu.
AUDIO
Key
lock
Orbiter
2.
Press the
3.
Press the
4.
Press the MENU button.
Γ
button and then
/
Δ
Ε
button to select White Wash.
TIME
White Wash
Set ID
Γ
button and then
Δ
/
Ε
button to select On
or
Off.
SCREEN
TWIN
18
MENU
Γ
On
Off
SPECIAL
Prev.
a
SCREEN Menu
Auto
-
adjustment (RGB1[PC]
mode
Automatically adjusts picture position
Press the MENU button and then
1.
SCREEN
only)
and minimizes
/
Δ
image shaking.
button to select the
Ε
VIDEO
menu.
Auto
configure
Γ
To set
ARC
AUDIO
Zoom In/Out
2.
Press the
3.
Press the
Γ
button and then
Γ
button.
Δ
/
Ε
button to select Auto
configure.
Position
TIME
Manual
Screen
SPECIAL
configure has finished, OK will be shown on screen.
position of the image is still not correct, try Auto adjustment
When Auto
?
If the
?
SCREEN
TWIN
MENU
again.
If
picture needs to be adjusted more after Auto adjustment
RGB1(PC), you can adjust the Manual config..
4.
-
-
Although
Setting
-
-
-
image is still not correct, your Monitor is functioning properly but needs
configure and the Manual config. isn't available for RGB2 mode.
are
You
are
available to 4:3 and 16:9 in
Press the ARC button to select
?
RGB1,RGB2.and COMPONENT(DTV).
a
desired
picture
format.
Each press of ARC button changes the screen display as shown below.
can also select 4:3, 16:9 or Zoom in the SCREEN menu.
You
4:3
Split
-
-
1.
adjustment.
available to 16:9, 4:3 and ZOOM in VIDEO (AV1 or AV2) and S-VIDEO.
If 4:3 is on the screen for a long time, that fixed image may remain visible.
?
-
further
Picture Format
You
1.
-
Prev.
in
the
The Auto
config.
adj.
Reset
Zoom
16:9
Zoom
This is the function to
It's available to
use
enlarge
With 2-SPLIT
ZOOM, you
If
enlarged,
a screen
is
the
with
screen
this function in every
can
only
move
the
a screen can move
ration.
regular
input
source.
into upside
setting Split
screen
without
or
downside.
Zoom.
Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
changes
2-SPLIT ZOOM
the
screen
1
2
In
case
shown below.
9-SPLIT ZOOM
123
¡ª
4
¢'¢"
5
¡ª
¡
¡
¡
4
as
4-SPLIT ZOOM
¡ª
1
display
456
789
¢'¢"
¢'¢"
of 9-SPLIT ZOOM:
Press the number button to select the section you enlarge.
If you choose No.5, the 5 section is enlarged and also can
usingtheΔ/Ε
In
9-SPLIT ZOOM
123
move
the
enlarged
screen
with
orΦ/Γbutton.
case
of
choosing
the No.5
¡ª
¡
456
789
¢'¢"
The 5 section is
changed
to
a
full
screen.
19
Screen Position
-
This function works in the
mode:
following
RGB1-PC, RGB1-DTV 480p,720p,1080i, COMPONENT 480p,720p,1080i.
1.
Press the MENU button and then
SCREEN
menu.
Press the
Γ
/
Δ
Ε
button to select the
VIDEO
Auto
AUDIO
configure
ARC
Zoom In/Out
2.
button and then
Δ
/
¡ª
button to select Position.
Ε
TIME
Position
Manual
3.
Press the
button and then
4.
Press the MENU button.
Γ
Ε
/
Δ
button to
adjust
the
SPECIAL
position.
Manual
1.
mode
Configure (RGB1[PC]
If the
isn't clear after auto
picture
phase manually.
menu.
2.
Press the
Γ
3.
Press the
Reset
/
Δ
and
Ε
that characters
especially
are
still
button to select the
Auto
Δ
/
button and then
Δ
button to select Manual
Ε
5.
Press the
?
The
?
The
1.
TIME
configure
ARC
Position
Manual
config.
Screen
adj.
SPECIAL
or
Γ
Φ
/
Γ
button to make
adjustment
adjustment
appropriate adjustments.
TWIN
MENU
Prev.
31.
range of Phase is 0
+50.
range of Clock is -50
~
Adjustments (VIDEO (AV1
This is the function to correct
or
trembling
Press the MENU button and then
Press the
Γ
button and then
3.
Press the
Γ
button and then
or
Δ
AV2),
S-VIDEO and COMPONENT 480i mode
picture instability
/
Ε
while
viewing
button to select the
a
video
tape.
VIDEO
Auto
AUDIO
Δ
Δ
/
/
Ε
Ε
button to select Screen
adj..
button to to select TV or VCR.
only)
configure.
ARC
Zoom In/Out
TIME
SPECIAL
Position
Manual
config.
Screen
adj.
Γ
?
Select the VCR
option if watching a VCR.
TV option for other equipment.(Except VCR)
?
Select the
SCREEN
TWIN
MENU
Prev.
Press the MENU button.
Initializing (Reset
This function
to
factory value)
operates in every mode.
To initialize the
adjusted
value
Press the MENU button and then
SCREEN
Press the
Δ
/
Ε
button to select the
Γ
VIDEO
Auto
configure.
ARC
menu.
AUDIO
button and then
Δ
/
Ε
button to select Reset.
Zoom In/Out
Position
TIME
Manual
Screen
Press the
?
You
PIP
20
TV
VCR
Reset
3.
0
~
2.
2.
0
Reset
menu.
1.
Phase
Clock
SCREEN
SCREEN
4.
picture
Press the MENU button.
Screen
-
the
Zoom In/Out
config..
button to to select Phase
Ε
/
Prev.
VIDEO
Clock.
4.
MENU
trembling, adjust
AUDIO
button and then
Γ
can
Γ
SPECIAL
button.
initialize ZOOM
position
and sub
¢"
¡
only)
adjustment
Press the MENU button and then
SCREEN
¢'
SCREEN
TWIN
-
Screen
Γ
config.
adj.
In/Out, Position, SPLIT ZOOM, PIP size,
picture
size of twin
picture.
config.
adj.
Reset
Γ
SCREEN
TWIN
MENU
Prev.
To Set
PIP Function
-
-
PIP lets you view 2 different inputs (sources) on your monitor
and the other source will show a smaller inset image.
When you select PC
sub picture.
or
DTV for main
in
PIP, you
can
watch
at the
same
time. One
source
video, AV1, AV2, S-Video
or
will be
large,
for
Component
PIP Size
PIP
Watching
Press the PIP button to switch
?
picture
screen
Press this button
again
on
the sub
pictures.
Press the WIN.SIZE button and then
sub
to switch it off.
picture
Φ
/
Γ
button to
the
adjust
size.
COMPONENT
VIDEO
10:30
WIN.SIZE
¢"
¢'
PIP
Aspect
Ratio
Swapping
Press the PIP ARC button.
?
The sub
picture
appears
the PIP
Press the SWAP button to
below.
as
the main and sub
pic-
COMPONENT
VIDEO
VIDEO
COMPONENT
10:30
10:30
16:9
4:3
Main Picture
Moving
exchange
tures.
Selecting
the PIP
Sub Picture
a source
input signal
for the PIP
Press the WIN.POSITION button.
Press the SUB INPUT button to select the
Repeatedly press the Δ / Ε or Φ / Γ button until desired
position is achieved. The sub picture moves up/down or
sub
mode for the
input
picture.
left/right.
COMPONENT
VIDEO
10:30
WIN.POSITION
?
¡ª
¢"
¢'
¡
?
?
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO and S-VIDEO for sub picture.
In VIDEO and S-VIDEO for main picture, you can select COMPONENT 480p/720p/1080i, RGB1 and RGB2 for sub picture.
In COMPONENT
480p/720p/1080i
for main
picture,
can
you
select VIDEO and S-VIDEO for sub
?
In COMPONENT 480i for main
and RGB2 for sub
Main Picture Size
main
picture
size when
ZOOM
100
enlarge
the PIP.
viewing
%
or
reduce the
Adjust
tons in
the main
enlarged
picture position
main picture.
with the
Δ
/
Ε
or Φ
/
Γ
but-
ZOOM
100
%
¡ª
¢"
¡
select RGB1
Adjustment
¡ª
¢'
can
picture.
Main Picture Position
Adjustment
Press the ZOOM+/ZOOM- button to
picture.
picture, you
¢"
¢'
¡
21
TWIN Picture
Main Picture Size
Adjustment
Press the TWIN PICTURE button.
?
Each press of TWIN PICTURE button
changes
the
screen
DW1
Sub Picture Size
display
as
OFF
DW2
Adjustment
Selecting
sub
?
Press the
?
WIN.POSITION function doesn't
/
Γ
button to
a source
for the Twin
picture
Press the SUB INPUT button to select the
Press the WIN.SIZE button.
Φ
shown below.
adjust
the sub
picture
size.
input
mode for the
picture.
operate in twin picture
COMPONENT
VIDEO
mode.
10:30
WIN.SIZE
¢'
?
¢"
?
?
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO and S-VIDEO for sub picture.
In VIDEO and S-VIDEO for main picture, you can select COMPONENT 480p/720p/1080i, RGB1 and RGB2 for sub picture.
In COMPONENT
480p/720p/1080i
for main
picture,
you
can
select VIDEO and S-VIDEO for sub
?
In COMPONENT 480i for main
and RGB2 for sub
Swapping
the Twin Picture
Press the SWAP button to
ture in twin
22
picture
exchange
the main and sub
pic-
mode.
COMPONENT
VIDEO
VIDEO
COMPONENT
10:30
10:30
picture.
picture.
picture, you
can
select RGB1
External Control Device
Connect the RS-232C
-
input jack
to
an
and control the Monitor 's functions
Connect the serial
-
Type
(such
as a
computer
or an
A/V control
The Monitor remote control and
to the RS-232C jack on the Monitor back panel.
supplied with the Monitor.
front panel controls (except main power) will not be functional
controlled
other external device.
by
PC
a
No.
Pin
1
No connection
are
computer
of connector; D-Sub
or
not
if the Monitor is
male
9-pin
1
name
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
5
(Receive data)
(Transmit data)
(DTE side ready)
9
(DCE side ready)
(Ready to send)
(Clear to send)
7
RTS
8
CTS
9
No Connection
RS-232C
system)
externally.
port of the control device
RS-232C connection cables
-
-
Setup
external control device
6
configurations
3-wire
configuration
(Not standard)
7-wire
configuration
(Standard RS-232C cable)
PC
PDP
RXD
2
3
TXD
TXD
3
2
RXD
PC
PDP
RXD
2
3
TXD
3
2
RXD
GND
TXD
GND
5
5
GND
GND
5
5
DTR
4
6
DSR
DTR
4
4
DTR
DSR
6
4
DTR
DSR
6
6
DSR
RTS
7
8
CTS
RTS
7
7
RTS
CTS
8
7
RTS
CTS
8
8
CTS
DB9
DB9
DB9
DB9
Control line
Set ID
-
Use this function to
specify
a
monitor ID number.
1.
Press the MENU button and then
Δ
/
2.
Press the
Ε
button to select Set ID.
Γ
button and then
Δ
/
Ε
button to select the SPECIAL
menu.
VIDEO
AUDIO
Language
Key
lock
Orbiter
TIME
Press the
3.
Γ
button and then Φ / Γ button to
adjust
Set ID to choose the
White Wash
Sst ID
Γ
SPECIAL
1
desired monitor ID number.
SCREEN
4.
?
The
adjustment
range of Set ID is 1
99.
~
TWIN
MENU
Prev.
Communication Parameters
?
Baud rate
?
Data
?
:
115200
length : 8
Parity : None
bits
bps (UART)
?Stopbit:1bit
?
Communication code
:
ASCII code
23
OK Acknowledgement
Command Reference List
COMMAND 1 COMMAND 2
DATA
[Command2][ ][Set ID][ ][OK][Data][x]
*
01. Power
k
0~1
a
Input Select
Aspect Ratio
k
b
0~4
k
c
0~2
04. Screen mute
k
d
0~1
05. Volume mute
k
e
0~1
06. Volume control
k
f
0~64
07. Contrast
k
g
0~64
08.
k
h
0~64
02.
03.
Brightness
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
*
k
i
0~64
The Monitor transmits ACK
(acknowledgement)
10. Tint
k
j
0~64
this format when
abnormal data from
non-viable functions
k
k
0~64
12. OSD select
k
l
0~1
13. Remote control lock mode
k
m
0~1
14. PIP/DW
k
n
0~3
15. PIP size
k
o
0~1
Sharpness
16. PIP
01. Power
receiving
or
communication
q
0~3
k
r
0~64
18. Bass
k
s
0~64
19. Balance
k
t
0~64
20. Color
temperature
k
u
0~3
21. R
k
v
0~64
22.
adjustment
Green adjustment
Blue adjustment
PIP input source
k
w
0~64
[a][ ][Set ID][ ][OK][Data][x]
k
$
0~64
Data
k
y
0~4
j
j
j
j
p
0~1
Γ To show Power On/Off.
q
0~1
Transmission
r
1~FE
s
0~9
24.
25. Orbiter
26. White Wash
27. Orbiter Time
28. Orbiter Pixel
*
When
setting
Setting
Setting
the 25
28,
a menu
~
does't
display
on
screen.
errors.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
0
Power Off
:
1
:PowerOn
1
:PowerOn
Acknowledgement
0
Power Off
:
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data
*
0
Power Off
:
1:PowerOn
In like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feed back presents
status about each function.
Transmission /
Protocol
Receiving
Transmission
02.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]
[Command 2]
[Set ID]
You
:
To control PDP set.
SELECT button
:
You
can
adjust
the set ID to choose
monitor ID number in
special
See
previous page.
Adjustment range is 1 99.
When selecting Set ID '0', every
ed
*[]
24
on
an
for the Monitor.
input
source
using
the INPUT
the Monitor's remote control.
connect-
0
:RGB1
1
:
Component
2
:
Video
S-Video
3
:
4
:RGB2
3
:
4
:RGB2
PDP set is controlled.
:
:
:
Acknowledgement
To transmit command data.
mand.
[Cr]
also select
[k][b][ ][Set ID][ ][Data][Cr]
Data
Transmit 'FF' data to read status of
*
can
Transmission
~
[DATA]
(Command:i)
source
k
menu.
*
select
Input
Γ To select input
:
desired
com-
[b][ ][Set ID][ ][OK][Data][x]
0
:RGB1
ASCII code '0x0D'
1
:
Component
ASCII code
2
:
Video
Carriage
Return
'space (0x20)'
on
(Command:a)
k
23.
based
Γ To control Power On/Off of the Monitor.
17. Treble
position
on
the data is data write
09. Color
11.
based
time, if the
Data
S-Video
03.
Ratio
Aspect
Γ To adjust the
You
(Command:c) (Main picture format)
Γ To adjust
format.
screen
also
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Special menu.
can
Transmission
:
1
:
2
:
Wide
(16:9)
Normal screen (4:3)
Full screen (Zoom)
*
1
:
2
:
Using
Wide
Min:0~Max:64
08.
screen
You
you select either 16:9
input,
or
4:3
screen
in the video
menu.
Min:0~Max:64
Refer to 'Real data
mapping1'.
mute on/off.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
1
:
Screen mute
0
:
Screen mute off
Data
(Picture off)
(Picture on)
on
(Command:i)
Γ To adjust the
You
[d][ ][Set ID][ ][OK][Data][x]
1
:
Screen mute
0
:
Screen mute off
mute
using
the MUTE button
on
Transmission
1
:
Volume mute off
Refer to 'Real data
(Volume off)
(Volume on)
on
menu.
mapping1'.
Min:0~Max:64
10. Tint
[k][e][ ][Set ID][ ][Data][Cr]
Volume mute
color.
color in the video
[i][ ][Set ID][ ][OK][Data][x]
Data
:
adjust
Acknowledgement
remote control.
0
screen
Min:0~Max:64
*
mute on/off.
adjust
also
[k][i][ ][Set ID][ ][Data][Cr]
(Command:e)
Γ To control volume
can
Transmission
(Picture off)
(Picture on)
on
Data
05. Volume mute
Min:0~Max:64
09. Color
Acknowledgement
Data
brightness.
adjust brightness
screen
also
[k][h][ ][Set ID][ ][Data][Cr]
screen
also
can
Transmission
Data
(Command:d)
[k][d][ ][Set ID][ ][Data][Cr]
can
mapping1'.
Brightness (Command:h)
Γ To adjust
Transmission
You
Refer to 'Real data
Min:0~Max:64
*
Data
menu.
[k][g][ ][Set ID][ ][Data][Cr]
Data
04. Screen mute
Data
contrast in the Picture
[g][ ][Set ID][ ][OK][Data][x]
aspect ratio.
Γ To select
contrast.
adjust
Acknowledgement
(16:9)
Normal screen (4:3)
Full screen (Zoom)
the PC
also
screen
[c][ ][Set ID][ ][OK][Data][x]
:
can
(Command:g)
screen
Transmission
*
Acknowledgement
Data 0
You
Data
[k][c][ ][Set ID][ ][Data][Cr]
Data 0
07. Contrast
(Command:j)
Γ To adjust the
You
can
also
screen
adjust
tint.
tint in the video
menu
Transmission
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
[k][j][ ][Set ID][ ][Data][Cr]
Data
Data
0
:
Volume mute
1
:
Volume mute off
06. Volume control
(Volume off)
(Volume on)
on
(Command:f)
Γ To adjust volume.
You
on
can
also
adjust
Red:0~Green:64
*
Refer to 'Real data
mapping1'.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red:0~Green:64
volume with the volume buttons
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1'.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
25
11.
Sharpness (Command:k)
Γ To adjust the
You
can
also
15. PIP Size
sharpness.
adjust sharpness in
the video
You
menu
Data0:
mapping1'.
picture
format
4:3
[k][ ][Set ID][ ][OK][Data][x]
[o][ ][Set ID][ ][OK][Data][x]
Data
Data0:
Min:0~Max:64
16. PIP
(Command:l)
1:
16:9
4:3
1:
16:9
position (Command:q)
You
also
can
adjust
WIN.POSITION
on
the sub
picture position using the
or in the Special menu.
the remote control
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
:OSDoff
[k][q][ ][Set ID][ ][Data][Cr]
1:OSDon
Data
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0
:OSDoff
1:OSDon
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
on screen
on screen
on screen
up
on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
13. Remote control lock mode
Γ To lock the front panel controls
Data
(Command:m)
on
the monitor and remote
control.
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
on screen
on screen
on screen
up
on screen
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
17. Treble
Acknowledgement
Γ To adjust treble.
You
[m][ ][Set ID][ ][OK][Data][x]
Data
*
If
0
:Lockof
you're
not
use
the remote
on/off,
control,
You
can
also control the PIP/DW
on
the remote control
using
or
Transmission
Data
1
:
PIP/DW off
:PIP
2:DW1
3:DW2
1
PIP/DW off
:PIP
Refer to 'Real data
mapping1'.
[r][ ][Set ID][ ][OK][Data][x]
the PIP
in the
or
Twin
Special
pic-
Data
Min:0~Max:64
menu.
(Command:s)
You
can
also
adjust
bass in the audio
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
[n][ ][Set ID][ ][OK][Data][x]
:
Data
2:DW1
3:DW2
Min:0~Max:64
*
Refer to 'Real data
mapping1'.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data
26
menu
Γ To adjust bass.
Acknowledgement
Data 0
treble in the audio
Min:0~Max:64
18. Bass
[k][n][ ][Set ID][ ][Data][Cr]
Data 0
adjust
Acknowledgement
(Command:n)
Γ To control the PIP (Picture In picture).
ture button
also
[k][r][ ][Set ID][ ][Data][Cr]
set this mode.
remote control lock is released.
*
14. PIP / Twin
can
(Command:r)
Transmission
1:Lockon
When main power is
the
Γ To select sub picture position for PIP.
Γ To select OSD (On Screen Display) on/off.
Data0
using
Acknowledgement
Acknowledgement
12. OSD select
PIP
[k][o][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
Refer to 'Real data
select the
the remote control.
on
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
*
also
can
WIN.SIZE
Transmission
Data
(Command:o)
Γ To select the PIP picture format.
screen
Min:0~Max:64
menu
19. Balance
24. PIP
(Command:t)
Γ To adjust balance.
You
can
also
adjust
balance in the audio
menu
Refer to 'Real data
Data
mapping1'.
for sub
picture
in PIP mode.
0
:
RGB1
1
:
COMPONENT
2
:
VIDEO
3
:
S-VIDEO
4:RGB2
Acknowledgement
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
[t][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
20. Color
source
Transmission
Min:0~Max:64
Data
(Command:y)
[k][y][ ][Set ID][ ][Data][Cr]
[k][t][ ][Set ID][ ][Data][Cr]
*
select
Γ To select input
Transmission
Data
input
temperature (Command:u)
0
:
RGB1
1
:
COMPONENT
2
:
VIDEO
3
:
S-VIDEO
25. Orbiter
4:RGB2
(Command:p)
Γ To adjust color temperature.
You
can
also
adjust
ACC in the video
menu.
Transmission
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data
o:
Normal
Γ To control the orbiter function on/off.
[j][p][ ][Set ID][ ][Data][Cr]
1: Cold
2: Warm
3: User
Data
Acknowledgement
o:
Normal
1: Cold
2: Warm
3: User
Adjustment (Command:v)
Γ To adjust red in color temperature.
Transmission
Refer to 'Real data
mapping
2'.
[v][ ][Set ID][ ][OK][Data][x]
:
Orbiter off
1
:
Orbiter
on
(Command:q)
[j][q][ ][Set ID][ ][Data][Cr]
0
:
White Wash off
1
:
White Wash
on
Acknowledgement
Min:0~Max:64
22. Green
0
26. White Wash
Data
Acknowledgement
Data
on
Transmission
Min:0~Max:64
*
Orbiter
Γ To control the white wash function on/off.
[k][v][ ][Set ID][ ][Data][Cr]
Data
Orbiter off
:
[p][ ][Set ID][ ][OK][Data][x]
Data
21. Red
:
1
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data
0
[q][ ][Set ID][ ][OK][Data][x]
Adjustment (Command:w)
Data
Γ To adjust green in color temperature.
0
:
White Wash off
1
:
White Wash
on
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
27. Orbiter Time
Data
Γ To adjust orbiter operation time
Min:0~Max:64
*
Refer to 'Real data
mapping
2'.
Acknowledgement
Data
Min:0~Max:64
23. Blue
term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
[w][ ][Set ID][ ][OK][Data][x]
Data
Setting (Command:r)
Min:1~Max:FE
*
Adjustment (Command:$)
Refer to 'Real data
mapping1'.
Acknowledgement
Γ To adjust blue in color temperature.
[r][ ][Set ID][ ][OK][Data][x]
Transmission
Data
Min:1~Max:FE
[k][$][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
2'.
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
27
28. Orbiter Pixel
Setting (Command:s)
Γ To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:9
*
Refer to 'Real data
mapping1'.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data
*
Min:0~Max:9
Real data
0
mapping
:Step0
1
*
Real data
0:-10
5:-9
A:Step10
A:-8
F:Step15
10:Step16
2D: -1
32: 0
37: +1
64
:
Step
100
5F: +9
64: +10
28
mapping
2
NOTE
29
check list
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
on.
No sound
?
Plug
another
power cord
product's
was
power cord into the wall outlet where the Monitor's
plugged
in.
?
Press the VOLUME
?
Sound muted? Press MUTE button.
?
Check to
(Γ)
button.
Picture OK &
No sound
see
if there is any
remote control
The remote control
?
doesn't work
Check to
?
Install
or
Poor color
Poor
are
between the Plasma
Display
installed with the correct
new
batteries.
(Refer
to
and the
polarities. (Refer
menu
and press the VOLUME
(Γ)
button.
certain distance between the Monitor and the VCR.
Keep
?
Activate any function to restore the
a
one
of the
the
?
Adjust
?
Typical
screen
for
more
than 5
Balance in the AUDIO
brightness
minutes,
menu.
the
(Refer
of the
screen
to
picture. (If
still
gets dark.)
p.16)
speakers
sound from the
Monitor
30
(Refer
p.15)
picture
output from
Strange
to
p.11)
?
on
No
if the batteries
Select Color in the VIDEO
to
or
object
obstruction.
p.11)
?
No
see
causing
sound due to normal Monitor
operation,
Monitor is not
faulty.
picture
is
Product
specifications
MODEL
MT-50PZ41 / MZ-50PZ43
(inches
/
mm)
48.2 / 1223
Height (inches
/
mm)
28.9 / 734
Depth (inches
/
mm)
4.1 / 105
/
99.2 / 45
Width
Weight (pounds
Power
kg)
AC100-240V
requirement
1280
Resolution
under 80%
Humidity (In operation)
specifications
(Dot)
0~40°C
Temperature (In operation)
The
720
16,770,000 (256 steps of each R, G and B)
Color
?
x
50/60Hz
~
shown above may be
changed
without notice for
quality improvement.
31
Download PDF