LG | PF-43A10 | LG PF-43A10 Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
before
operating your
carefully
set. Retain it
for future reference.
Record model number and serial
number of the set. See the label
attached
on
the back
cover
and quote
this information to your dealer when
you require service.
Model number
:
Serial number
:
P/NO
:
482-H75E
(MP55A,
229Y
TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off
Programme selection
Volume adjustment / Mute function
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning / Manual programme
Fine tuning / Programme edit
10
Setting up
tuning
Picture adjustment
Picture adjustment
14
Convergence
Sound adjustment
Sound adjustment
Stereo/Dual reception
NICAM reception (option)
Sound output selection
16
Other functions
TV and AV modes / Child lock
Sound system setting / Colour system
Noise reduction / Sleep timer
18
Time setting
Clock
On/off time
Auto sleep
20
PIP operation (option)
On and off
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture freeze
Sub picture position change
Sub picture minimization
Programme selection for sub picture
21
Teletext (option)
Switch on/off
List mode / TOP mode (option) / FASTEXT mode
Special teletext functions
22
Connection of external equipment
Aerial socket
Audio/Video in/out sockets
Euro scart socket
S-video/Audio in sockets (S-AV)
External speaker
25
Troubleshooting
2
setting
check list
27
Installation
Power
This set
supply, the voltage is as indicated
apply DC power to the set. To
protect your set from damage during thunderstorms, please pull
out the mains plug and aerial plug.
operates
the label
on
on
on a
AC mains
the back. Never
Warning
To
prevent fire
shock
or
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
cover of the set as this can expose you to
and other hazards. If the set does not operate
very
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
the
Do
on
or
heat. Also
position to allow a free flow
ventilation openings on the back cover.
not place the set on a sloping or unstable
placed
a
the bottom of the set may
cause
it to
move
ensure
that the
of air. Do not
cover
area as
the casters
and to be
damaged.
3
Location and function of controls
All the functions
Some functions
panel
be controlled with the remote control handset.
also be adjusted with the buttons on the front
can
can
of the set.
Remote control handset
Before you use the remote control
batteries. See the next page.
POWER
1
2
MUTE
1.
handset, please install the
POWER
switches the set
on
from
standby
or
off to
standby.
3
123
2.
TV/AV
4
MUTE
switches the sound
on or
off.
456
MENU
3.
789
UNIT
selects
5
single
or
double
digit.
PR
0
PIP
4.
VOL
OK
VOL
NUMBER BUTTONS
switch the set
from
on
TEXT
standby
directly
or
select
PR
PR-
PR+
SWAP INPUT
5.
PIP BUTTONS
PIP
switches the sub
6
7
5
picture
on or
off.
INPUT
PSM
SSM
DUAL
SIZE
STILL
POSITION
POWER
REW
PLAY
FF
CH-
CH+
STOP
REC
T
X
T
selects the
SLEEP
mode for the sub
input
picture.
SWAP
alternates between main and sub
PIP
pictures.
M
STILL
freezes motion of the sub
8
picture.
POSITION
relocates the sub
picture
in clockwise direction.
SIZE
adjusts
the sub
picture
size.
PR+/selects
6.
SSM
a
programme for the sub
picture.
(Sound Status Memory)
preferred sound setting.
recalls your
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
8.
VCR BUTTONS
control
4
an
LG video cassette recorder.
a
number.
Location and function of controls
9.
TV/AV
selects TV
or
AV mode.
10. MENU
selects
11. Δ / Ε
a menu.
(Programme Up/Down)
on from standby.
switches the set
selects
a
programme
or a menu
item.
POWER
MUTE
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
123
OK
TV/AV
9
MENU
10
VOL
11
456
accepts your selection
or
displays
the current mode.
789
12. TELETEXT BUTTONS
These buttons
For further
are
details,
(option)
see
PR
0
used for teletext.
PIP
the 'Teletext' section.
VOL
OK
TEXT
13. DUAL
PR
selects the
selects
language during dual language broadcast.
mono sound during stereo broadcasts.
PR-
PR+
SWAP INPUT
12
14. SLEEP
sets the
Note
:
13
sleep
In teletext
timer.
mode,
and POSITION buttons
the
are
PR+/-, SWAP, INPUT, SIZE,
STILL
used for teletext function.
PSM
SSM
DUAL
SIZE
STILL
POSITION
POWER
REW
PLAY
FF
CH-
CH+
STOP
REC
T
X
T
SLEEP
14
12
PIP
M
Battery
installation
The remote control handset is
powered by two AA type batteries.
Gently pull down the cover of the remote control handset until the
battery compartment is exposed. Install two batteries as indicated
by the polarity symbols( and ) marked inside the compartment.
damage from possible battery leakage, remove the
plan to use the remote control handset for an
extended period of time.
Note
:
To avoid
batteries if you do not
5
Location and function of controls
Front
panel
10
STAND-BY
VIDEO
TV/AV
MENU
OK
VOL
POWER
PR
(L)-AUDIO-(R)
S-VIDEO
AV2
(MONO)
AV 2
345
6
78
S-VIDEO
VIDEO
(L)-AUDIO-(R)
(MONO)
2
9
<Back
(
panel>
)
(R)
(L)
MAIN
1
POWER
EXT
SPEAKER
INT
1.
MAIN POWER
(on the back)
switches the set
2.
3.
TV/AV
or
AV mode.
MENU
selects
5.
a menu.
OK
accepts your selection
6.
7.
off.
AUDIO/VIDEO(or S-VIDEO) IN SOCKETS (AV 2)
Connect the audio/video(or S-video) out sockets
equipment to these sockets.
selects TV
4.
on or
or
displays
the current mode.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
Δ / Ε
(Programme Up/Down)
on from standby.
switches the set
selects
8.
a
programme
switches the set
9.
or a menu
on
from
standby
off to
standby
10. REMOTE CONTROL SENSOR
CASTERS
turn and
6
or
standby.
STANDBY INDICATOR
illuminates when the set is in
*
item.
POWER
(on the bottom)
the set easily.
move
mode.
of external
Basic
operation
On and off
1.
Press the main power button
the set
2.
on
the back of the set to switch
on.
If the set is in
press the POWER, Δ / Ε
the remote control handset to switch it
standby mode,
NUMBER buttons
on
or
on
fully.
3.
Press the POWER button
4.
on
the remote control handset
once
The set reverts to
more.
Press the main power
standby.
button again
POWER
to switch the set off.
MUTE
Note : If, while the set is switched on, the mains plug is disconnected the set will switch on when the mains plug is replaced in
123
the mains power socket.
456
MENU
Programme
selection
You
a
can
select
789
programme number with the Δ / Ε
or
NUMBER
buttons.
VOL
Before
for
entering a number, press the -/-single digit programme numbers
programme numbers appears
Volume
PR
0
on
the
button until the
or
__
for
display
double digit
OK
VOL
_
PR
screen.
adjustment
Press the Φ / Γ button to
adjust
the volume.
SSM
DUAL
Mute function
Press the MUTE button. The sound is switched off and the
MUTE appears. You can cancel it
SSM or DUAL button.
by pressing
the
MUTE,
display
Φ / Γ,
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
press the MENU button to display each
Press the Δ / Ε button to select a menu item.
Repeatedly
The selected
3.
menu
item
menu.
changes from green to purple.
change the setting of a menu
Press the Φ / Γ button to
OK button to
display
the sub
item
menu.
MENU
'100OCONTRASTOOOOOOOO
'O50OBRIGHTOOOOOOOO
PR
・O50OCOLOROOOOOOOO
CLOCKOOSET
__:__
≥O60OSHARPNESSOOOOOOO
VOL
OK
VOL
¡Φ, Γ TMOTOOSELECT
OOOOOO
¡Δ, Ε TM,TMTOOADJUST
¡Δ, Ε, Φ, Γ, OK, MENUTM
¡OKTM,OOTOOSTART
PR
MENU 1
¶O50OTREBLEOOOOOOOO
∞O50OBASSOOOOOOOO
¢O0OBALANCEOOOOOOO
PRESENTOO__:__
ONOOTIMEOSET
__:__OHOLDOPRO1
OOFFOSURROUNDOOOOOOO
OOFFOUBBOOOOO
¡Φ, Γ TMOTOOSELECT
¡Δ, Ε TM,TMTOOADJUST
¡OKTM,OOTOOSTART
¡Δ, Ε, Φ, Γ,OK, MENUTM
MENU 2
PRESENTOO__:__
INPUTOOOOOOOOOO:TV
CHILDOLOCKOOOOO:OFF
SOUNDOSYSTEMOOO:BG¡5.5TM
COLOROSYSTEMOOO:AUTO
NOISEOREDUCTION:OFF
¡Δ,
OFFOTIMEOSET
__:__OOOHOLDO
¡Φ, Γ TMOTOOSELECT
¡Δ, Ε TM,TMTOOADJUST
¡OKTM,OOTOOSTART
Ε TMOTOOSELECT
¡Φ, Γ TMTMTOOCHANGE
MENU 3
CLOCKOSSET
ONOOTIMEOSET
OFFOTIMEOSET
AUTOOSLEEPOOOFF
AUTOOSSLEEP
¡Φ, Γ TMOTOOSELECT
CONVERGENCE
¡Δ, Ε TMOTOOSELECT
¡OKTM,OOTOOSET
MENU 4
MENU 5
CONVERGENCE
ΦΔΕΓ
8
or
On
screen menus
FINEOOTUNING
AUTOOOPROGRAM
MANUALOSEARCH
FINEOTUNINGOOOO{{{
PROGRAMOOEDIT
¡Δ, Ε TMOTOOSELECT
¡Φ, Γ TMOTOOADJUST
¡OKTM,OOTOOSTART
¡OKTMOO,TOOSTORE
MENU 5
AUTO
PROGRAM
OOOOOOOOOOOO{{{
OOOOVHF_LOOOOOOOOOOPRO1
OOOOOO¡OKTMOOTOOSTOP
MENU
TV PROGRAMME
PR
PROGRAMO01
MENU 1
BANDOOOOVHF_L
SEARCH
VOL
OK
VOL
STORE
¡Δ, Ε TMOTOOSELECT
PR
¡Φ, Γ TMTMTOOCHANGE
<
PR.UU1UUUPR.U__
>
AUTOUAVUUUUUU:OFF
SKIPUUUUUUUUU:OFF
¡Δ, Ε TMOTOOSELECT
¡Φ, Γ TM,TMTOOCHANGE
¡OKTM,OOTOOEXCHANGE¡0..9TM
Note
a.
b.
:
The
menus automatically disappear in about 10 seconds if you
do not press a button. However if you press the MENU button
again, the last selected menu will appear with your selected
menu item.
In the AV
are
c.
not
mode, MENU
5 and SOUND SYSTEM of MENU 3
displayed.
In the teletext
mode, only MENU
SHARPNESS of MENU 1 is not
1 and 2
are
displayed.
displayed.
9
Setting up
Up
MENU 5
to 80 TV stations
numbers
FINEOOTUNING
able to
AUTOOOPROGRAM
TV stations
to
(0
use
79).
be stored in this set
can
Once you have
the Δ / Ε
or
by programme
preset the stations, you will be
NUMBER buttons to
MANUALOSEARCH
scan
the stations you
programmed.
PROGRAMOOEDIT
¡Δ, Ε TMOTOOSELECT
Stations
be tuned
can
using
an
automatic
or a
manual mode.
¡OKTM,OOTOOSTART
Auto programme
All stations that
can
recommended that you
MENU
be received
use
stored
are
auto programme
by this method. It is
during installation of this set.
press the MENU button to select MENU 5.
1.
Repeatedly
2.
Press the Δ / Ε button to select AUTO PROGRAM.
3.
Press the OK button to
The band
PR
tuning
begin
auto
programming.
automatically changes
VHF-L
VHF-H
When auto
programming
UHF.
OK
PR
is
To
auto
stop
programming,
number 1 at that time will be
Note
:
unclear
on
the
the station stored into
screen.
press the OK button. The programme
displayed.
Some undesired stations may be stored, such as noisy or
signals from distant transmitters. You can easily skip these
stations
10
completed,
programme number 1 will appear
by entering PROGRAM EDIT mode.
Setting up
Manual programme
TV stations
tuning
MENU 5
FINEOOTUNING
Manual programme lets you manually tune and arrange the
stations in whatever order you desire.
2.
Repeatedly press the MENU button to select MENU 5.
Press the Δ / Ε button to select MANUAL SEARCH.
3.
Press the OK button to
1.
display
AUTOOOPROGRAM
MANUALOSEARCH
PROGRAMOOEDIT
¡Δ, Ε TMOTOOSELECT
¡OKTM,OOTOOSTART
the MANUAL SEARCH mode.
PROGRAMO01
BANDOOOOVHF_L
SEARCH
STORE
123
¡Δ, Ε TMOTOOSELECT
¡Φ, Γ TM,TMTOOCHANGE
456
4.
Press the Δ / Ε button to select PROGRAM. Select the desired
programme number with the Φ / Γ
5.
7.
NUMBER buttons.
Press the Δ / Ε button to select BAND. Press the Φ / Γ button
to select
6.
or
VHF-L, VHF-H
Press the Δ / Ε
or
UHF
as
commence
To
stop the search
searching.
If
a
PR
0
VOL
required.
button to select SEARCH. Press the Γ
to
MENU
789
button
station is found the seach will
OK
VOL
PR
stop.
at any time press the OK button.
If this station is the
one
required
select the last
menu
item
STOREwiththeΔ/ΕbuttonandthenstoreitwiththeΦ/Γ
button, if
not press the Γ button
again.
8.
To store another station
9.
Press the OK button to return to normal TV
Fine
repeat steps
4 to 7.
viewing.
tuning
Normally
fine
tuning
is
only
necessary if
reception
is poor.
2.
press the MENU button to select MENU 5.
Press the Δ / Ε button to select FINE TUNING.
3.
Press the OK
4.
Press the Φ / Γ button to fine tune for the best
1.
Repeatedly
button, and the FINE TUNING mode will appear.
picture
and
sound.
5.
Press the OK button to store the
setting.
The
will appear.
The finely tuned programme will be indicated
during programme selection.
display STORED
by yellow
number
11
TV stations
Setting up
Programme
MENU 5
edit
FINEOOTUNING
PROGRAMOOEDIT
This function enables you to rearrange the programmes stored by
auto programming in whatever order you desire. Also you can skip
¡Δ, Ε TMOTOOSELECT
particular programme
AUTOOOPROGRAM
MANUALOSEARCH
numbers stored
by
auto
programming.
¡OKTM,OOTOOSTART
1.
2.
3.
press the MENU button to select MENU 5.
Press the Δ / Ε button to select PROGRAM EDIT.
Repeatedly
Press the OK
button, and the PROGRAM EDIT mode will
appear.
<
PR.UU1UUUPR.U__
>
123
AUTOUAVUUUUUU:OFF
SKIPUUUUUUUUU:OFF
456
¡Δ, Ε TMOTOOSELECT
MENU
¡Φ, Γ TM,TMTOOCHANGE
789
¡OKTM,OOTOOEXCHANGE¡0..9TM
PR
0
VOL
OK
Exchanging programmes
VOL
1.
Press the Φ / Γ button to
number.
PR
2.
The
viewing
change the left hand
corresponding
station
programme
to the
programme number is shown on the screen.
Press the NUMBER buttons to enter the desired
right
new
hand
programme number. At that time the station corresponding to
the right hand programme number is shown via the sub picture.
Any
number under 10 is entered with
a
numeric '0' in front of
it,
i.e. '05' for 5.
3.
Press the OK button. The station stored in the
programme number will
programme number.
4.
12
Repeat steps
1 to 3 to
now
exchange
appear
as
the
other programmes.
right
hand
left hand
Setting up
Auto AV
TV stations
setting
MENU 5
FINEOOTUNING
If your VCR outputs a switching voltage when it is switched to
select AUTO AV : ON with the VCR connected to Euro
playback,
AUTOOOPROGRAM
MANUALOSEARCH
PROGRAMOOEDIT
scart socket.
The set is
is
input.
automatically
switched to AV3 mode when
But if you want to
keep
on
watching
TV
an
mode,
AV
signal
¡Δ,
Ε TMOTOOSELECT
¡OKTM,OOTOOSTART
set AUTO
AV to OFF.
1.
Press the Φ / Γ button to select your desired programme
number.
2.
Press the Δ / Ε button to select AUTO AV.
3.
Press the Φ / Γ button to select ON
4.
Press the OK button.
5.
Repeat steps
or
OFF.
123
456
1 to 4 to set another programme.
MENU
789
Skipping
a
PR
0
stored programme
VOL
1.
Press the Φ / Γ button to select the programme you want to
skip. The viewing station corresponding to the selected
programme number is shown
on
the
Press the Δ / Ε button to select SKIP.
3.
Press the Φ / Γ button to select ON
4.
5.
VOL
PR
screen.
2.
If you select
OK
or
OFF.
ON, the selected station is skipped.
Press the OK button.
NUMBER buttons is
skip another programme.
skipped programme numbers with the
still possible and they will be indicated by
blue numbers
programme selection.
Repeat steps
1 to 4 to
The selection of the
during
Press the MENU button twice to return to normal TV
viewing.
13
Picture
MENU 1
Picture
adjustment
adjustment
'100OCONTRASTOOOOOOOO
'O50OBRIGHTOOOOOOOO
・O50OCOLOROOOOOOOO
≥O60OSHARPNESSOOOOOOO
¡Δ, Ε, Φ, Γ, OK, MENUTM
You
can adjust picture contrast, brightness, colour intensity,
sharpness and tint (NTSC input only) to the levels you prefer.
1. Repeatedly press the MENU button to select MENU 1.
2. Press the Δ / Ε button to select the desired picture item.
3.
Press the Φ / Γ button to make
At this
setting
4.
appropriate adjustments.
point you can complete your adjustments
for immediate recall by following steps 4 to 6.
or
store your
Press the OK button.
MENU
FAVORITEO1
FAVORITEO2
PR
¡Δ, Ε TMOTOOSELECT
¡OKTM,OOTOOSTORE
VOL
OK
VOL
5.
PR
Select FAVORITE 1
The FAVORITE 1
or
FAVORITE 2 with the Δ / Ε button.
FAVORITE 2
or
programme two entirely different
lighting conditions such as day and
6.
PSM
Press the OK button. The
allow you to
display STORED will
for various
appear.
To recall your preferred setting, press the PSM button until the
desired picture (STANDARD, FAVORITE 1 or FAVORITE 2)
appears. The STANDARD
reproduction
14
options
picture settings
night.
at the
factory
picture
is
programmed for good picture
changed.
and cannot be
Picture
adjustment
MENU 4
Convergence
CLOCKOSSET
ONOOTIMEOSET
This function enables you to adjust the colour convergence of
screen during receiving the signals. When the set is first installed
or
it is
relocated, the picture may be unstable with three colour
ghosts (red,
green,
This
blue).
problem
can
be solved
by adjusting
OFFOTIMEOSET
AUTOOSSLEEP
CONVERGENCE
¡Δ, Ε TMOTOOSELECT
¡OKTM,OOTOOSET
the colour convergence.
1.
Press the MENU button to select MENU 4.
2.
Press the Δ / Ε button to select CONVERGENCE.
3.
Press the OK button to
display
the CONVERGENCE mode.
display + and ΦΔΕΓ are unstable with three
ghosts, the colour convergence needs to be adjusted.
If the
colour
TV/AV
MENU
CONVERGENCE
PR
VOL
If the
display
is
white, colour convergence adjustment is
OK
VOL
PR
not
necessary.
CONVERGENCE
ΦΔΕΓ
4.
Press the TV/AV button to
The
display
Press it
5.
adjust
the colour convergence.
ΦΔΕΓ is selected in red.
again
to select the
display
ΦΔΕΓ in blue.
Press the Δ / Ε and Φ / Γ buttons to
+
(red
or
blue)
with the green
superimpose
the
display
one.
The
display + is moved to the left (ΦΦ), right (ΓΓ), up (ΔΔ) or
(ΕΕ) by pressing the Φ, Γ, Δ, Ε buttons.
If the red and blue display + are superimposed with the green
one, the display + will be changed to white.
Press the OK button to return to normal TV viewing.
down
6.
7.
15
Sound
Sound
MENU 2
¶O50OTREBLEOOOOOOOO
∞O50OBASSOOOOOOOO
¢O0OBALANCEOOOOOOO
OOFFOSURROUNDOOOOOOO
You
adjustment
adjustment
adjust the sound treble, bass, balance, surround and UBB
(Ultra Bass Booster) as you prefer. The surround sound creates an
can
all around sound effect
OOFFOUBBOOOOO
emphasizes heavy
as
in
a
concert hall and UBB stresses and
sound.
¡Δ, Ε, Φ, Γ, OK, MENUTM
2.
press the MENU button to select MENU 2.
Press the Δ / Ε button to select the desired sound item.
3.
Press the Φ / Γ button to make desired
4.
Press the OK button to store. The
1.
Repeatedly
adjustment.
adjusted sound
level is
stored in the FAVORITE SOUND mode.
To recall your preferred setting, press the SSM button until the
desired sound (STANDARD SOUND, MUSIC SOUND, or
FAVORITE
MENU
SOUND) display
and MUSIC SOUND
at the
factory
are
and cannot
appears. The STANDARD SOUND
programmed
be changed.
for
good
sound
reproduction
PR
VOL
OK
PR
SSM
DUAL
VOL
Stereo/Dual
When
reception
programme is selected, the sound information for the
station appears with the colour system and programme number.
a
Broadcast
On Screen
Mono
(None)
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo
signal is weak; you can switch to mono
by pressing the DUAL button. In mono reception the depth of sound is
improved. To switch back to stereo, press the DUAL button again.
Note : If the mono signal is distorted or noisy press the DUAL
button to switch between mono and forced mono sounds. In case
of forced mono sound MONO is displayed on the screen.
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I II by pressing the DUAL button
repeatedly.
DUAL I sends the
primary
DUAL II sends the
secondary
broadcast
language to the loudspeakers.
language to the loud-
broadcast
speakers.
DUAL I II sends
16
a
separate language
to each
loudspeaker.
Sound
NICAM
This set
adjustment
reception (option)
receive the
high quality NICAM (Near Instantaneous
Multiplex) digital sound.
Sound output can be selected according to the type of received
broadcast by pressing the DUAL button repeatedly.
can
Audio
Companding
1.
When NICAM
MONO
2.
or
received, you
can
select NICAM
received, you
can
select NICAM
When NICAM stereo is
STEREO
FM
3.
is
mono
FM MONO.
or
FM MONO. If the stereo
is
weak, switch
to
mono.
When NICAM dual is
II
signal
or
DUAL I II
display MONO
or
received, you
can
MONO. When FM
appears
on
the
select DUAL
mono
I, DUAL
is selected the
screen.
Sound output selection
In AV1 and 3
modes, you
can
select
output sound for the left and
right loudspeakers.
Repeatedly
press the DUAL button to select the sound
output.
DUAL
LR
:
LL
:
RR
Audio
:
signal from audio L input is sent to left loudspeaker and
audio signal from audio R input is sent to right loudspeaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right loudspeakers.
17
Other functions
TV and AV modes
MENU 3
INPUTOOOOOOOOOO:TV
be set for TV
CHILDOLOCKOOOOO:OFF
Inputs
SOUNDOSYSTEMOOO:BG¡5.5TM
video cassette recorder
COLOROSYSTEMOOO:AUTO
NOISEOREDUCTION:OFF
¡Δ, Ε TMOTOOSELECT
¡Φ, Γ TM,TMTOOCHANGE
can
or
AV mode. AV mode is used when
(VCR),
or
other
equipment
a
is connected to
the set.
Note
When
:
a
VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external
equipment'
section.
1.
2.
3.
press the MENU button to select MENU 3.
Press the Δ / Ε button to select INPUT.
Repeatedly
Press the Φ / Γ button to select
The three AV modes
MENU
OK
PR
or
AV3.
AV 1
:
VCR connected to the AV 1 sockets
on
the back
AV 2
:
VCR connected to the AV 2 sockets
on
the front
AV 3
:
VCR connected to the Euro scart socket
on
the back
Press the OK button.
To return to TV mode from AV mode press the Δ / Ε
buttons.
PR
VOL
4.
TV, AV1, AV2
are :
VOL
Alternatively you
TV/AV button.
can
select the TV
or
AV mode
or
NUMBER
by pressing
the
Child lock
The TV
can
be set
so
that the remote control handset is needed to
control it.
This feature
1.
2.
3.
be used to
prevent unauthorised viewing.
Repeatedly press the MENU button to select MENU 3.
Press the Δ / Ε button to select CHILD LOCK.
Press the Φ / Γ button
ON
4.
can
or
on
the remote control handset to select
OFF.
Press the OK button to return to normal TV
viewing.
With the child lock on, the display CHILD LOCK ON appears on
the screen if any button on the front panel is pressed while viewing
the TV.
Sound system
setting
If the sound is distorted
or
noisy,
reset TV
system using this
function.
1.
2.
3.
press the MENU button to select MENU 3.
Press the Δ / Ε button to select SOUND SYSTEM.
Repeatedly
Press the Φ / Γ button to select the correct sound
BG[5.5], I[6.0], DK[6.5]
4.
18
or
M[4.5].
Press the OK button to return to normal TV
viewing.
system,
Other functions
Colour system
The set is
normal
setting
adjusted
MENU 3
for the main TV
system in your
area.
circumstances, select AUTO. If necessary (if input signal is
the colour
1.
Repeatedly
press the MENU button to select MENU 3.
2.
Press the Δ / Ε button to select COLOR SYSTEM
system.
SOUNDOSYSTEMOOO:BG¡5.5TM
NOISEOREDUCTION:OFF
or
¡Δ, Ε TMOTOOSELECT
¡Φ, Γ TM,TMTOOCHANGE
.
Press the Φ / Γ button to select the correct colour
AUTO, PAL, SECAM, NTSC4.43
4.
INPUTOOOOOOOOOO:TV
CHILDOLOCKOOOOO:OFF
COLOROSYSTEMOOO:AUTO
weak), change
3.
Under
system,
NTSC3.58.
Press the OK button to return to normal TV
viewing.
Noise reduction
This function
during viewing
reduces
picture
noise.
2.
Repeatedly press the MENU button to select MENU 3.
Press the Δ / Ε button to select NOISE REDUCTION.
3.
Press the Φ / Γ button to select ON.
4.
Press the OK button to return to normal TV
1.
MENU
PR
viewing.
VOL
Sleep
timer
OK
VOL
PR
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The
display
40, 30,
will appear
20 and 10.
---
The timer
Note
a.
b.
c.
begins
on
the screen, followed
SLEEP
by 120, 90, 60, 50,
to count down from the number of minutes selected.
:
To view the
remaining sleep time, press the SLEEP button once.
sleep time, repeatedly press the SLEEP button
until the display SLEEP--- appears.
When you switch the set off, the set releases the preset sleep
To cancel the
time.
19
Time
setting
Clock
MENU 4
CLOCKOSSET
The clock
ONOOTIMEOSET
OFFOTIMEOSET
the 24 hour
uses
time before
AUTOOSSLEEP
operating
system, and
must be set to the correct
the set.
CONVERGENCE
1.
¡Δ, Ε TMOTOOSELECT
2.
¡OKTM,OOTOOSET
press the MENU button to select MENU 4.
Press the Δ / Ε button to select CLOCK SET.
Repeatedly
3.
Press the OK button to
4.
Select and adjust hour and minute
Φ / Γ buttons.
5.
Press the OK button to start.
display
the sub
menu.
by pressing
the Δ / Ε and
On/off time
By using this function, the set automatically switches on at the
preset time and programme. You must set the clock correctly
before
MENU
1.
2.
PR
using
press the MENU button to select MENU 4.
Press the Δ / Ε button to select ON TIME SET.
Repeatedly
3.
Press the OK button to
4.
Select and
number
VOL
OK
PR
VOL
on/off time functions.
5.
display the sub menu.
adjust hour, minute, RUN/HOLD, and
by pressing the Δ / Ε and Φ / Γ buttons.
programme
Press the OK button to start.
For OFF TIME
SET, repeat above steps. Please
note the absence
of programme number in this mode.
Note :
In the event of power interruption
failure), the clock must be reset.
a.
b. RUN/HOLD
option
(disconnection
is used to activate
or
deactivate
or
power
preset on/
off times.
c.
If the
same
off time
d.
f.
time and the off
time, only the
put into standby mode with the POWER button
operate the on time function.
If the on time function activates, the set will automatically switch
to the on time programme number, even during viewing.
the remote control handset to
Two hours after the set is switched
will
automatically switch
has been pressed.
g.
on
This set must be
on
e.
time is set for the
operates.
Once the
the
Auto
on or
back to
on by the on time function it
standby mode unless a button
off time is set, these functions
operate daily
at
preset time.
sleep
If you select AUTO SLEEP ON the set will automatically switch
itself to standby mode approximately ten minutes after a TV station
stops broadcasting.
2.
press the MENU button to select MENU 4.
Press the Δ / Ε button to select AUTO SLEEP.
3.
Press the OK button to
4.
Press the Φ / Γ button to select ON or OFF.
Press the OK button to return to normal TV viewing.
1.
5.
20
Repeatedly
display
the sub
menu.
PIP
PIP
the
(Picture
same
PIP is
an
in
Picture) displays
time you
optional
a
operation (option)
within
picture
a
picture. Thus,
at
watch two different programmes.
function. Only a set with the PIP can perform this
can
function.
On and off
Press the PIP button to switch
Press this button
Input
again
on a
sub
picture.
to switch it off.
mode selection for sub
picture
Press the INPUT button while the sub
main
picture
remains within the
picture.
Each time this button is
picture
is
displayed
each
pressed,
shown below
as
mode for the sub
input
the main
on
screen
beneath
the programme number.
PIP:
PIP:
(programme number)
PIP:
Swapping
between main and sub
Press the SWAP button to
Sub
AV1
picture
PIP:
AV2
PIP
AV3
exchange
pictures
the main and sub
PR-
PR+
SIZE
STILL
SWAP INPUT
pictures.
freeze
Press the STILL button to freeze the sub
Press this button
again
picture.
POSITION
PIP
to restore motion.
PIP
Sub
picture position change
Press the POSITION button
achieved. The sub
Sub
picture
picture
repeatedly
moves
position
is
minimization
Press the SIZE button to reduce the sub
Press this button
Programme
until desired
clockwise.
again
picture
size.
to restore normal size.
selection for sub
picture
Press the PR +/- buttons. The selected programme number is
displayed beneath the main picture programme number.
Note
:
In the PIP
mode, you
can
not
adjust
the sub
picture settings.
21
Teletext
Teletext is
system
an
(option)
optional function,
therefore
only
a
set with the teletext
receive the teletext broadcast.
can
Teletext is
a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV
can support the LIST, TOP and
systems. LIST (standard teletext) consists of a number
FASTEXT
of pages which are selected by directly entering the corresponding
page number. TOP and FASTEXT are more modern methods
allowing quick
123
and easy selection of teletext information.
TV/AV
456
Switch on/off
789
Press the TEXT button to switch to teletext. The initial page
PR
0
selected page appears on the screen.
Two page numbers, TV station name, date and time
TEXT
on
PR
PR-
PR+
the
last
displayed
headline. The first page number indicates your
while the second shows the current page displayed.
screen
selection,
SWAP INPUT
are
or
Press the TEXT button to switch off teletext. The
previous
mode
reappears.
LIST mode
If the TV is in TOP
M
or
FASTEXT
mode, press the
button to
switch to LIST mode.
Page selection
1.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then reenter the correct page number. If the page is not available, the
page number, e.g. "> 300 <" will flash for a few seconds.
2.
The Δ
/ Ε button
following
22
page.
can
be used to select the
preceding
or
Teletext
Programming
a
(option)
colour button
Four teletext page numbers of your choice can be colour coded
and easily selected by pressing the corresponding coloured button
on
the remote control handset.
1.
Using
the NUMBER
buttons, select the page you wish
to
programme.
2. Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
3.
of the
screen
Press
a
change
to ">000?".
colour button to store the page number. From
select this page with the same coloured button.
you can
4. The three other coloured buttons
are
programmed
now
in the
on,
same
123
way.
456
TOP mode
The
user
(option)
guide displays
the bottom of the
789
four
fields-red, green, yellow and blue
at
yellow field denotes the next group
and the blue field indicates the next block.
screen.
PR
0
The
OK
TEXT
PR
Group/block/page selection
1.
2.
PR-
PR+
SIZE
STILL
SWAP INPUT
With the BLUE button you can progress from block to block.
Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
3.
With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
4.
The RED button
Δ button
be used.
can
Alternatively
permits
the Ε button
to return to
can
previous
POSITION
PIP
selection.
be used.
Direct page selection
Corresponding to the LIST teletext mode,
entering it as a three digit number using
you can select a page by
the NUMBER buttons in
TOP mode. If the page is not available, the page
">300<" flashes for a few seconds.
number, e.g.
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1.
E
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2.
You
3.
Corresponding to the LIST teletext mode, you can select a page
by entering its three digit page number with the NUMBER
4.
The Δ
can
along
the
buttons in FASTEXT mode.
/ Ε button
following
can
be used to select the
preceding
or
page.
23
Teletext
Special
G
(option)
teletext functions
REVEAL
Press this button to
such
Press this button
the
6
to
again
Press
again
to return to the normal
STILL
the
display.
UPDATE
Displays
the
the TV
picture
on
the
screen
while
for
waiting
teletext page. The display
will appear at the
left hand corner of the screen. When the updated
new
HOLD
will
display
Press this button to view the
7
the information from
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
page is available then
page number.
SIZE
remove
EXPAND
top
SWAP INPUT
information,
puzzles.
Selects double
Press
PR+
the concealed
or
display.
page.
Press this button
D
display
solutions of riddles
as
updated
to the
change
teletext page.
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
Stops
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this
POSITION
T
X
T
button is
pressed
left-hand
corner
change
the
stop symbol is displayed
of the
again.
MIX
Displays
picture.
the teletext pages
To switch the TV
H
top
is inhibited.
To continue press this button
F
at the
and the automatic page
screen
picture
superimposed
off press this button
on
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to
remove
the
display.
In
teletext mode press this button to select and hold or
change a four digit sub page number. This is displayed
along
the bottom of the
to exit this function.
24
screen.
Press this button
again
Connection of external
You
connect additional
can
equipment,
such
equipment
VCRs, camcorders
as
etc. to your set.
75Ω
Aerial socket
(R)
(L)
OUT
1.
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
2.
IN
Connect the aerial cable to the RF aerial in socket of the VCR.
AUDIO
desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
3.
Store the VCR channel
on a
S-VIDEO
stored.
5.
Press the PLAY button
VIDEO
AV1
on
VCR
the VCR.
75Ω
(R)
Audio/Video in/out sockets
(L)
OUT
IN
1.
Connect the audio/video out sockets of the VCR to audio/video
AUDIO
in sockets of the set and in sockets of the VCR to out sockets of
the set.
2.
VIDEO
AV1
S-VIDEO
If the VCR is connected to the AV1 sockets
on
the back of the
set, press the TV/AV button to select AV1. You should select
AV2 if the VCR is connected to the AV2 sockets
on
VCR
the front of
the set.
3.
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
VIDEO
on
the
AV2
(MONO)
AV 2
You
tape
also record programmes received
via audio/video out sockets.
can
(L)-AUDIO-(R)
S-VIDEO
screen.
by
the TV
on
S-VIDEO
VIDEO
(L)-AUDIO-(R)
(MONO)
video
VCR
75Ω
Euro scart socket
(R)
1.
Connect the
socket
2.
on
euro
the back of the set.
Press the PLAY button
on
(L)
OUT
scart socket of the VCR to the Euro scart
IN
the VCR.
AUDIO
VIDEO
AV1
If your VCR outputs
socket. If AUTO AV
a
:
connect to Euro scart
switching voltage
ON is selected, the set will switch to AV3
mode
automatically. Otherwise, press the TV/AV button
remotecontrol handset to select AV3.
The VCR
playback picture
appears
on
the
on
S-VIDEO
AV3
EXT SP
(8Ω)
the
(R)
screen.
VCR
You
can
record programmes received
by
the TV
on
video
tape.
25
Connection of external
equipment
S-video/Audio in sockets
75Ω
(R)
(L)
(S-AV)
When
connecting a S-VHS VCR to
picture quality will be further improved.
OUT
the S-VIDEO
socket, the
IN
AUDIO
VIDEO
AV1
1.
Connect the S-video socket of the S-VHS VCR to the S-VIDEO
socket
S-VIDEO
2.
on
sockets
3.
S-VHS VCR
the front
or
back of the set.
Connect the audio cable from the S-VHS VCR to the AUDIO IN
the front
on
or
back of the set.
If the S-VHS VCR is connected to the AV 1 sockets
on
the back
of the set, press the TV/AV button to select AV1. You should
select AV2 if the S-VHS VCR is connected to the AV 2 sockets
on
VIDEO
(L)-AUDIO-(R)
4.
S-VIDEO
The VCR
AV2
(MONO)
AV 2
S-VIDEO
VIDEO
the back of the set.
Press the PLAY button
the VCR.
on
playback picture
appears
on
the
screen.
(L)-AUDIO-(R)
(MONO)
Note
a.
:
If you have
a mono
to the AUDIO L
S-VHS VCR
b.
VCR,
(MONO)
connect the audio cable from the VCR
socket
on
the front
panel of the
set.
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR
simultaneously, only
the S-VIDEO
can
be
received.
External
AV3
EXT SP
You
can
connect external Hi-Fi
effect. When
(8Ω)
connecting
speakers to get a wide stereo
speakers, these must be 8
the external
ohm.
(R)
1.
(L)
Connect two external
speakers to the EXTERNAL SPEAKER
by red (+) and black(-) knobs.
When connecting the external speakers, make sure that the
polarity is correct.
Note : When the EXT/INT switch is positioned to EXT, the
internal speakers do not operate.
Set the EXT/INT switch to EXT(external).
To use TV speakers set the switch to INT(internal).
sockets
MAIN
POWER
EXT
SPEAKER
INT
2.
26
speakers
as
indicated
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains
switched
plug-(plugged
on)
Is the TV switched
Try
in and
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF

advertising