LG | PF-43A20 | LG PF-43A20 Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
Model number
:
Serial number
:
P/NO
:
3828VA0160A
(MP87A/B,
and quote this
require service.
cover
information to your dealer when you
007W
TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off
Programme selection
Volume adjustment / Mute function
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine tuning
Programme edit
Setting up
Picture adjustment
Picture adjustment
9
13
Convergence
Sound adjustment
Sound adjustment
Stereo/Dual reception
NICAM reception (option)
Sound output selection
15
Other functions
TV and AV modes / Child lock
Auto sleep
Off timer / On timer
Auto demonstration
Calling a programme table
17
PIP operation (option)
On and off / Programme selection for sub picture
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
20
Teletext (option)
Switch on/off
LIST mode / TOP mode / FASTEXT mode
Special teletext functions
21
Connection of external equipment
Aerial socket
Audio/Video in/out sockets
Euro scart socket
24
S-video/Audio in sockets
Troubleshooting
2
check list
(S-AV)
26
Installation
Power
This set
operates
indicated
on
on
the label
an
on
AC mains
the back
the set. In the event of thunderstorms
out the aerial and mains
the voltage is as
apply DC power to
powercuts, please pull
supply,
Never
cover.
or
plugs.
Warning
To
prevent fire
shock
or
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75Ω
For the best
cover.
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set
onto the
so
that
no
bright light
or
sunlight
falls
directly
Care should be taken not to expose the set to
any unnecessary vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow of air. Do not
cover
the ventilation
Do not
on
screen.
place
the set
openings on the
on a sloping or
the bottom of the set may
back
cover.
unstable
cause
area as
it to
move
the casters
and to be
damaged.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
Before you use the remote control
batteries. See the next page.
1
POWER
MUTE
1.
2
handset, please install the
1
2
3
I/II
4
5
6
PSM
POWER
switches the set
2.
3
on
8
9
TV/AV
PIP
0
TEXT
MENU
3.
or
off to
standby.
on or
off.
NUMBER BUTTONS
switch the set
4.
standby
MUTE
switches the sound
7
from
from
on
PIP BUTTONS
standby
directly
or
select
a
number.
(option)
PIP
switches the sub
picture
on or
off.
PR+/-
PR
selects
VOL
VOL
OK
a
programme for the sub
picture.
SWAP
alternates between main and sub
PR
picture.
INPUT
PR-
PR+
SWAP
INPUT
selects the
4
mode for the sub
input
picture.
SIZE
PSM
SSM
DUAL
adjusts
LIST
5
SIZE
the sub
picture
size.
STILL
STILL POSITION 9/4 PIP
freezes motion of the sub
6
TX
PIP
picture.
POSITION
T
M
relocates the sub
START LENGTH SP/LP ON/OFF
picture
in clockwise direction.
9/4 PIP
7
V
C
R
CH
QSR
REW
PLAY
switches
FF
sub
CH
P/STILL
STOP
REC
5.
on
or
off the programme
scan
pictures.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
6.
SSM
(Sound Status Memory)
preferred sound setting.
recalls your
7.
VCR BUTTONS
control
4
a
(option)
LG video cassette recorder.
mode
through
9
or
4
Location and function of controls
8.
DUAL
selects the
selects
9.
language during dual language broadcast.
sound during stereo broadcasts.
mono
TV/AV
selects TV
or
AV mode.
10. MENU
selects
a menu.
POWER
11. Δ / Ε
(Programme Up/Down)
on from standby.
switches the set
selects
a
programme
or a menu
MUTE
1
2
3
I/II
4
5
6
PSM
7
8
9
TV/AV
PIP
0
TEXT
MENU
8
item.
5
Φ / Γ (Volume Down/Up)
adjusts
adjusts
the volume.
menu
9
settings.
OK
10
accepts your selection
or
displays
the current mode.
12. LIST
display
the programme table.
PR
13. TELETEXT BUTTONS
These buttons
For further
are
details,
(option)
used for teletext.
see
VOL
11
VOL
OK
the 'Teletext' section.
PR
Note
:
In teletext
mode, the PR+/-, SWAP and INPUT buttons
are
used for teletext function.
PR-
PR+
SWAP
INPUT
PSM
SSM
DUAL
LIST
8
Battery
installation
12
The remote control handset is
To load the
batteries,
powered by
turn the handset
battery compartment.
and
polarity symbols(
two AA
)
marked inside the
SIZE
type batteries.
and slide open the
Install two batteries as indicated by the
over
M
compartment.
START LENGTH SP/LP ON/OFF
CH
CH
Note
:
To avoid
damage
from
possible battery leakage,
use
13
PIP
XT
V
C
R
batteries if you do not plan to
extended period of time.
STILL POSITION 9/4 PIP
T
QSR
REW
PLAY
FF
P/STILL
STOP
REC
the
remove
the remote control handset for
an
5
Location and function of controls
Front
?
panel
PF-60A30 series
TV/AV
SSM
PSM
MENU
OK
VOL
/I
PR
10
1
STAND BY
AV
R
ONO
O
3
5
4
11
7
6
O
9
8
O
2
MAIN
POWER
<SIDE OF TV>
?
PF-52A70 series
TV/AV
SSM PSM
4
5
6
MENU
OK
VOL
/
PR
STAND BY
10
1
(L/MONO)
(R)
AUDIO
VIDEO
S-VIDEO
AV2
3
11
2
79
8
MAIN
POWER
<SIDE OF TV>
?
PF-43A20 series
STAND BY
TV/AV
MENU
OK
VOL
AV2
PR
S-VIDEO
1
1.
2.
3.
4.
5.
MAIN POWER
switches the set
off.
IN SOCKETS (AV 2)
Connect the audio/video (or S-video) out
sockets of external equipment to these
sockets.
TV/AV
selects TV
MENU
selects
8.
58 9
Δ / Ε
6
7
AV mode.
OK
or
Φ / Γ (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
displays
the current
R
2
(Programme Up/Down)
POWER
switches the set
on
from
standby
or
off to
POWER / STANDBY INDICATOR
illuminates when the set is in standby mode.
dims when the set is switched on.
10. REMOTE CONTROL SENSOR
a menu.
AUD O
standby.
9.
or
4
L/MONO
switches the set on from standby.
selects a programme or a menu item.
AUDIO/VIDEO(or S-VIDEO)
mode.
6
3
7.
on or
accepts your selection
6.
10
VIDEO
11. PSM (Picture Status Memory)
recalls your preferred picture setting.
SSM (Sound Status Memory)
recalls your preferred sound setting.
*
CASTERS
turn and
(on the bottom)
the set easily.
move
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
4.
on
the remote control handset
once
The set reverts to
more.
Press the main power
standby.
button again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch on when the mains plug is replaced in
the mains power socket.
Programme
selection
You
a
can
select
programme number with the Δ / Ε
or
POWER
MUTE
1
2
3
4
5
6
7
8
9
MENU
0
buttons.
Volume
TV/AV
NUMBER
adjustment
Press the Φ / Γ button to
adjust
the volume.
PR
Mute function
VOL
VOL
OK
Press the MUTE button. The sound is switched off and the
MUTE appears. You can cancel it
SSM or DUAL button.
by pressing
the
display
MUTE, Φ / Γ,
PR
SSM
On
screen
The
menu can
language
be
selection
displayed
on
the
screen
in the desired
language.
First select your language.
1.
Press the MENU button to display the Main menu.
2.
Press the Φ / Γ button to select the Function menu icon
3.
Press the OK button to
display
Press the Δ / Ε button to select
5.
Set the desired
6.
Press the OK button.
language
Special function
Language.
the
4.
DUAL
(option)
.
menu.
with the Φ / Γ button.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select each menu icon.
The selected menu icon changes from green to purple.
3.
Press the OK button to display the sub menu.
4.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from green to purple.
5.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
The menus automatically disappear in about 1 minute if you do
not press a button.
b. In the AV mode, the Station menu icon is not selected.
c.
In the teletext mode, menus are not displayed.
1.
2.
MENU
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
PR
VOL
OK
VOL
Δ ΕOOKOTV
AV
PR
Station
menu
(TV mode)
Picture
Standard
Game
Mild
Cinema
User
Convergence
Δ ΕOOKOTV
Picture
AV
menu
Sound
EqualizerOOOOOOCinema
Station
BalanceOOOOOOOOOOOO00
Φ ΓOOKOTV
AV
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
Main
menu
Δ ΕOΦ ΓOOKOTV
Sound
AV
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ ΕOΦ ΓOOKOTV
Function
8
AV
menu
TV stations
Setting up
Up to 100 TV stations can be stored in this set by programme numbers
(00 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
All stations that
can
recommended that you
tuning
Δ
be received
use
stored
are
auto programme
by
during
Press the MENU button to
Press the Φ / Γ button to select the Station menu icon
Press the OK button to display the Station menu.
4.
5.
ΕOOKOTV
AV
installation of this set.
1.
3.
the Main
menu
this method. It is
2.
display
Station
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme
.
1
2
3
4
5
6
7
8
9
menu.
AutoOprogramme
StorageOfromOOOOOOOO01
SystemOOOOOOOOOOOOAUTO
TV/AV
Start
MENU
0
Δ ΕOΦ
6.
ΓOOKOTV
AVO0~9
Storage from. Select the
programme number with the Φ / Γ button or
NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select System. Select a TV system
Press the Δ / Ε button to select
beginning
7.
withtheΦ/Γbutton;AUTO,M,BG,IorDK.
8.
9.
PR
VOL
OK
VOL
PR
Press the Δ / Ε button to select Start.
Press the OK button to begin auto programming.
AutoOprogramme
StorageOfromOOOOOOOO04
SystemOOOOOOOOOOOOAUTO
PR.O27OOCHO30OOOOOO{{{
..................
OK
All receivable stations
are
stored.
The programme number and channel number being searched
appear below the display System. The channel number is assigned
and stored with CH for television
To
stop
auto
programming,
or
CC for cable channels.
press the OK button.
When auto programming is completed, the Programme edit
mode appears on the screen with the channel number. See the
'Programme edit' section to edit the stored programme.
10. Press the TV/AV button to return to normal TV
Note:
a.
If there is
viewing.
sound noise in some channels after auto
is completed, re-adjust System to M, BG, I or
DK in Manual programme tuning. Refer to 'Manual programme
a
programming
b.
tuning.
During
auto
programming is performing, pictures
through the sub picture.
of scanned
programmes appears
9
Setting up
Station
Manual programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
tuning
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a
station
Δ ΕOOKOTV
TV stations
name
with five characters to each programme number.
AV
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Station
3.
Press the OK button to
4.
Press the Δ / Ε button to select Manual programme.
Press the OK button to display the Manual programme
5.
display
display
the Main
the Station
menu.
icon
menu
.
menu.
menu.
ManualOprogramme
1
2
3
4
5
6
7
8
9
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
Δ ΕOΦ ΓOOKOTV
AV
MENU
0
6.
Press the Δ / Ε button to select
with
7.
System.
theΦ/Γbutton;BG, I,DKorM.
8.
VOL
OK
PR
VOL
9.
a
TV
system
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select
PR
Select
If
then
or
CATV
as
select the channel number
directly
with the NUMBER buttons.
V/UHF
required.
possible,
Press the Δ / Ε button to select Search.
Press the Φ / Γ button to
found the search will
commence
searching.
If
a
station is
stop.
10. If this station is the
one required, press the Δ / Ε button to
Select the desired programme number with
the Φ / Γ button or NUMBER buttons. Any number under 10 is
select
Storage.
entered with
a
numeric '0' in front of
11. Press the OK button to store it. The
12. To store another station
Assigning
a
station
it, i.e.
'05' for 5.
display Stored will
repeat steps
appear.
6 to 11.
name
1.
Press the Δ / Ε button to select Name.
2.
To select your desired first character, press the Γ button then
Δ button. You can use the alphabet A to Z, a blank, ., +,
and
_
the numeric 0 to 9.
10
3.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
4.
your choice of the second character, and so on.
Press the Γ button to finish assigning a station name.
5.
Press the OK button to store it. The
6.
To
assign
another station
name
display Stored will
repeat steps
1 to 5.
appear.
TV stations
Setting up
Auto AV
setting
scart socket. The set is
an
AV
mode,
is
signal
input.
automatically
switched to AV-3 mode when
But if you want to
keep
on
watching
Δ ΕOOKOTV
Press the Δ / Ε button to select Auto AV.
2.
Press the Φ / Γ button to select On
3.
Press the Δ / Ε button to select
4.
programme number with the Φ / Γ button or NUMBER buttons.
Press the OK button. The display Stored will appear.
5.
To set another programme
or
AV
Off.
Storage.
repeat steps
Select the desired
1 to 4.
Press the TV/AV button to return to normal TV
viewing.
1
2
3
4
5
6
7
8
9
tuning
Normally
1.
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
TV
set Auto AV to Off.
1.
Fine
Station
Station
If your VCR outputs a switching voltage when it is switched to
playback, select Auto AV On with the VCR connected to Euro
fine
Repeat
tuning
is
only
necessary if
'Manual programme
is poor.
reception
tuning' steps
TV/AV
MENU
0
1 to 5.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
PR
StorageOOOOOOOOOOOOO12
Δ ΕOΦ ΓOOKOTV
AV
VOL
OK
2.
Press the Δ / Ε button to select Fine. Press the Φ / Γ button to
fine tune for the best
picture
and sound.
3.
Press the Δ / Ε button to select
4.
programme number with the Φ / Γ button or NUMBER buttons.
Press the OK button. The display Stored will appear.
5.
VOL
PR
Storage.
Select the desired
Press the TV/AV button to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
viewing.
by yellow
number
11
TV stations
Setting up
Station
menu
Programme
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy to the next programme numbers.
Δ ΕOOKOTV
1.
2.
AV
3.
4.
5.
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to display the Main menu.
Φ / Γ button to select the Station menu icon
OK button to display the Station menu.
Δ / Ε button to select Programme edit.
OK button to display the Programme edit
.
menu.
ProgrammeOedit
Γ 00OCHO05
OO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
1
2
3
4
5
6
7
8
9
?Delete
?Move
Δ ΕOΦ ΓOOKOTV
TV/AV
Deleting
1.
MENU
0
2.
a
Select
?Copy
?Skip
AV
programme
programme to be deleted with the Δ / Ε
Press the RED button twice.
a
or
Φ / Γ button.
The selected programme is deleted and all the
programmes are shifted up one position.
3.
Press the TV/AV button to return to normal TV
Copying
1.
PR
VOL
OK
PR
VOL
2.
a
Select
programme to be
Press the GREEN button.
copied
with the Δ / Ε
following programmes are shifted down
Press the TV/AV button to return to normal TV
Moving
1.
2.
3.
a
Φ / Γ button.
position.
viewing.
one
programme
a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button. The selected programme is in yellow.
Move the programme to the desired programme number with
the Δ / Ε button.
moves
through
the programme list in
4.
Press the YELLOW button
5.
Press the TV/AV button to return to normal TV
Skipping
2.
or
Select
The selected programme
the direction selected.
1.
viewing.
programme
a
All the
3.
following
Select
a
to release this function.
viewing.
programme
programme to be
Press the BLUE button.
The
again
a
skipped programme
BLUE
skipped with
the Δ / Ε
or
Φ / Γ button.
turns to blue.
3.
Press the
button
4.
programme.
The programme returns to green and the skip is cancelled.
Press the TV/AV button to return to normal TV viewing.
again
to
release the
skipped
programme selection, with the Δ / Ε button the skipped
can not be found. If you want to find the skipped
programme directly enter the programme number with the
During
programme
NUMBER buttons
12
or
select it in the programme edit
or
table mode.
Picture
You
adjustment
select your preferred picture setting; Standard, Game,
as you prefer. Also you can adjust picture contrast,
brightness, colour intensity, sharpness and tint (NTSC input only)
to the levels you prefer.
can
Mild, Cinema,
1.
2.
3.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Picture menu icon
Press the OK button to display the Picture menu.
Picture
Picture
menu
Standard
Game
Mild
Cinema
User
Convergence
.
Δ ΕOOKOTV
AV
Standard, Game, Mild, Cinema, User
1.
Press the Δ / Ε button to select Standard, Game, Mild,
2.
Cinema or User.
Press the OK button.
Picture
ContrastOOOOOOOOOOO100
BrightnessOOOOOOOOOO75
ColourOOOOOOOOOOOOOO50
SharpnessOOOOOOOOOOO50
TintOOOOOOOOOOOOOOOO00
YNROOOOOOOOOOOOOOOOOff
...................
Δ ΕOΦ ΓOOKOTV
3.
4.
5.
1
2
3
4
5
6
7
8
9
PSM
AV
Press the Δ / Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
Press the OK button. These picture setting is stored in User
MENU
0
menu.
These picture settings, except for User, are temporarily stored
and if the TV switches off and then on, the adjusted level
returns to the factory preset settings.
Note :
Tint can be selected for the NTSC only.
b. The picture item YNR reduces picture noise if you select On.
PR
a.
To recall your preferred setting, press the PSM button until the
desired picture (Standard, Game, Mild, Cinema, User)
appears. Standard, Game, Mild and Cinema are programmed
at the factory for good picture reproduction appropriate to each
programme chacracter.
VOL
OK
VOL
PR
PSM
13
Picture
Picture
menu
adjustment
Convergence
Picture
This function enables you to adjust the colour convergence of
screen during receiving the signals. When the set is first installed
Standard
Game
Mild
Cinema
or
User
Convergence
Δ ΕOOKOTV
it is
relocated, the picture may be unstable with three colour
ghosts (red,
AV
This
blue).
green,
problem
can
be solved
by adjusting
the colour convergence.
1.
Press the Δ / Ε button to select
2.
Press the OK button to
If the
display
+
are
display
Convergence.
the
Convergence mode.
ghosts, the
unstable with three colour
convergence needs to be
colour
adjusted.
Convergence
TV/AV
MENU
OKOTV
If the
display
is
AVO
white, colour convergence adjustment is
not
necessary.
PR
3.
VOL
OK
VOL
Press the OK button to
The
PR
adjust the colour convergence.
display OK TV/AV ΔΕΦΓ is selected in red.
Press it
4.
again
to select the
display OK TV/AV ΔΕΦΓ
Press the Δ / Ε and Φ / Γ buttons to
+
(red
or
blue)
with the green
superimpose
the
The
6.
14
display
one.
display + is moved to the left, right, up or down by pressing
Φ, Γ, Δ, Ε buttons.
If the red and blue display + are superimposed with the green
one, the display + will be changed to yellow or cyan.
the
5.
in blue.
Press the TV/AV button to return to normal TV
viewing.
Sound
Sound
You
adjustment
adjustment
1.
2.
3.
Sound
Sound
select your preferred sound setting; Cinema, Sports,
Music, Speech, as you prefer. Also you can adjust the sound frequency to the levels you prefer. The surround sound creates an all
around sound as in a concert hall and UBB(Ultra Bass Booster)
stress and emphasizes heavy sound and AVL(Auto Volume
Leveller) automatically keeps on an equal volume level even if you
change programmes.
can
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Sound menu icon
Press the OK button to display the Sound menu.
menu
EqualizerOOOOOOCinema
BalanceOOOOOOOOOOOO00
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
Δ ΕOΦ ΓOOKOTV
AV
.
Equalizer
1.
2.
3.
Press the Δ / Ε button to select Equalizer.
Press the Φ / Γ button to select Cinema,
or User.
Press the OK button
Sports, Music,
Speech
In
Cinema, Sports, Music, Speech, each corresis displayed on the screen. Cinema, Sports,
Music and Speech are programmed at the factory for good
case
of
ponding equalizer
sound
reproduction appropriate
Equalizer
Equalizer
+10
Cinema
Music
MENU
Sports
0
0
Music
Speech
Speech
User
-10
User
0.1 0.3 1.0
3.3
-10
10K
AV
(Cinema, Sports, Music,
Speech)
4.
+10
Cinema
Sports
Δ ΕOOKOTV
to each programme character.
0.1
Δ ΕOΦ ΓOOKOTV
0.3
1.0
3.3 10K
AV
(User)
In case of User, select the sound band with the Φ / Γ button and
make appropriate sound level with the Δ / Ε button as you prefer.
Press the OK button. In case of User only, the display Stored
will appear.
Balance
1.
Press the Δ / Ε button to select Balance.
2.
Press the Φ / Γ button to adjust the balance level.
3.
Press the OK button. The display Stored will appear.
PR
VOL
OK
VOL
PR
SSM
UBB
1.
Press the Δ / Ε button to select UBB.
2.
Press the Φ / Γ button to select On or Off.
3.
Press the OK button. The display Stored will appear.
Surround
1.
Press the Δ / Ε button to select Surround.
2.
Press the Φ / Γ button to select On or Off.
3.
Press the OK button. The display Stored will appear.
AVL
1.
Press the Δ / Ε button to select AVL.
2.
Press the Φ / Γ button to select On or Off.
3.
Press the OK button. The display Stored will appear.
To recall your preferred setting, press the SSM button until the
desired sound (Cinema, Sports, Music, Speech, User)
appears.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
I/ II
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the DUAL button. In mono reception the depth
of sound is improved. To switch back to stereo, press the DUAL
button again.
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I II by pressing the DUAL button
Language selection
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I II sends a separate language to each loudspeaker.
NICAM
reception(option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the DUAL button repeatedly.
DUAL
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM MONO.
When NICAM dual is received, you can select DUAL I, DUAL
II or DUAL I II or MONO. When FM mono is selected the
display MONO appears on the screen.
1.
2.
3.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right
loudspeakers.
Repeatedly
L+R
:
L+L
:
R+R
16
:
press the DUAL button to select the sound
output.
Audio signal from audio L input is sent to left loudspeaker
and audio signal from audio R input is sent to right loud-
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to display the Main menu.
Φ / Γ button to select the Function menu icon
OK button to display the Special function menu.
Δ / Ε button to select Input.
Φ / Γ button to select TV, AV1, AV2, AV3 SAV1
SpecialOfunction
Special
InputOOOOOOOOOOOOOOTV
function
AutoOsleepOOOOOOOOOff
menu
ChildOlockOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ ΕOΦ ΓOOKOTV
AV
.
or
SAV2.
The five AV modes are :
AV 1 : VCR connected to the AV1 sockets on the back
AV 2 : VCR connected to the AV2 sockets on the front panel
AV 3 : VCR connected to the Euro scart socket on the back
SAV1 : VCR connected to the AUDIO and S-VIDEO sockets on
the back panel
SAV2 : VCR connected to the AUDIO and S-VIDEO sockets on
the front panel
6.
Press the OK or TV/AV button.
To return to TV mode from AV mode press the Δ / Ε or NUMBER
buttons.
Alternatively
you
TV/AV button.
can
select the TV
or
AV mode
TV/AV
MENU
the
by pressing
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorised viewing.
1.
2.
3.
4.
5.
6.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
Press the OK or TV/AV button to return to normal TV viewing.
.
With the lock on, the display Child lock appears on the
any button(with the exception of r/I button) on the front
pressed while viewing the TV.
Auto
screen
panel
PR
VOL
OK
VOL
PR
if
is
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
1.
Press the MENU button to display the Main menu.
2.
3.
4.
5.
6.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button on the remote control handset to select On.
Press the OK or TV/AV button to return to normal TV viewing.
.
17
Other functions
Special
SpecialOfunction
function
InputOOOOOOOOOOOOOOTV
menu
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ ΕOΦ ΓOOKOTV
AV
Off timer
The off timer automatically switches the set to
preset time elapses.
1.
2.
3.
4.
5.
6.
standby
after the
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Off timer.
Set the desired time period with the Φ / Γ button.
Press the OK or TV/AV button to return to normal TV viewing.
.
On timer
The set
1.
2.
3.
4.
5.
6.
POWER
TV/AV
MENU
automatically
switches
on
after the
preset time elapses.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select On timer.
Set the desired time period with the Φ / Γ button.
Press the OK or TV/AV button to return to normal TV viewing.
.
You can set the on/off timer from 10 minutes up to 12 hours 50
minutes in 10 minutes steps. The timer begins to count down from
the selected time period.
Note :
This set must be put into standby mode with the POWER
button on the remote control to operate the on timer function.
b.
Two hours after the set is switched on by the on timer function
it will automatically switch back to standby mode unless a
button has been pressed.
c.
To view the remaining on/off time, select the Special function menu.
d.
To cancel the set on/off time, set the on/off timer to --:--.
e.
When you switch the main power off, the on/off time is reset.
a.
PR
VOL
OK
PR
VOL
Auto demonstration
Auto demonstration allows you to review all the
med in the set.
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
the
the
the
the
the
18
stop
auto
program-
MENU button to display the Main menu.
Φ / Γ button to select the Function menu icon
OK button to display the Special function menu.
Δ / Ε button to select Demonstration.
OK button to start the demonstration.
When the demonstration reaches the last
from the beginning.
To
menus
.
display,
demonstration, press any button.
it starts
again
Other functions
Calling
You
programme table
a
can
displaying
check the programmes stored in the memory
the programme table.
by
Displaying programme table
Press the LIST button.
The programme table appears on the screen. One programme
table contains ten programmes as below.
ProgrammeOtable
Γ 00OCHO05 OOO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
Δ ΕOΦ ΓOOKOTV
Note
1
2
3
4
5
6
7
8
9
AV
:
TV/AV
0
a.
You may find some blue programmes.
Programme edit mode.
b.
Some programme numbers with the mark
programme table indicate there is
no
They
station
are
-----
name
skipped
in the
shown in the
assigned.
PR
programme in the programme table
Select upper or lower programme with the Δ / Ε button and left
Selecting
a
or
programme with the Φ / Γ button. The colour of normal
programmes is green and skipped programme is blue.
right
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
OK
VOL
PR
LIST
programme table
ten programme table pages in which contain 100
programmes.
the pages.
Switching
a
VOL
Pressing
the Δ / Ε
or
Φ / Γ button repeatedly turns
back to TV mode
Press the TV/AV
or
NUMBER buttons
during
programme table
mode.
19
PIP
operation (option)
Option:
PIP is optional function,
so
that
only
the set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Programme
selection for sub
picture.
picture
Press the PR +/- buttons. The selected programme number is
displayed at the left upper side of sub picture.
Input
mode selection for sub
picture
Press the INPUT button while the sub
main picture.
PIP
picture
remains within the
Each time this button is pressed, each input mode for the sub
as shown below at the left upper side of sub
picture is displayed
picture.
PIP:
(programme number)
SAV2
PR
VOL
OK
Swapping
VOL
PR-
SIZE
PR+
SWAP
INPUT
STILL POSITION 9/4 PIP
PIP
Sub
AV1
PIP:
between main and sub
Press the SWAP button to
PR
PIP:
SAV1
picture
exchange
PIP:
AV2
AV3
pictures
the main and sub
pictures.
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture,
followed by 1/9.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 9 or 4
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the 9/4 PIP button. 9 sub pictures appear and search all the
stored stations.
Press this button again. At this time 4 sub pictures search them.
Press the 9/4 PIP button once more. The 9 or 4 sub pictures switch
off.
20
Teletext
Teletext is
teletext
optional function,
an
system
therefore
only
(option)
a
set with the
receive the teletext broadcast.
can
Teletext is
a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV
FASTEXT
can support the LIST, TOP and
systems. LIST (standard teletext) consists of a number of
pages which are selected by directly entering the corresponding page
number. TOP and FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TEXT
Switch on/off
Press the TEXT button to switch to teletext. The initial page
selected page appears on the screen.
Two page numbers, TV station name, date and time
on
the
are
or
last
TV/AV
displayed
headline. The first page number indicates your
while the second shows the current page displayed.
screen
selection,
Press the TEXT
or
TV/AV button to switch off teletext. The
previous
mode reappears.
PR
LIST mode
PR
If the TV is in TOP
or
FASTEXT
mode, press the
M
button to
switch to LIST mode.
Page selection
1.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then re-
M
enter the correct page number.
2.
The Δ / Ε button
following
can
be used to select the
preceding
or
page.
21
Teletext
Programming
(option)
a
colour button
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
the NUMBER
Using
2.
programme.
Wait until the page is displayed on the screen and press the
OK button. The page numbers in the colour boxes along the
bottom of the
1
2
3
4
5
6
7
8
9
buttons, select the page you wish
1.
change
screen
to
to "000?".
3.
Press
colour button to store the page number. From now on,
select this page with the same coloured button.
4.
you can
The three other coloured buttons
a
are
programmed
in the
same
way.
TOP mode
The
0
user
guide displays
the bottom of the
four
fields-red, green, yellow and blue
The
at
field denotes the next group
and the blue field indicates the next block.
screen.
yellow
Group/block/page selection
1.
2.
PR
With the BLUE button you can progress from block to block.
Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
3.
With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively
the Δ button can be used.
4.
The RED button
OK
PR
Alternatively the
permits
Ε button
can
to return to
previous
selection.
be used.
Direct page selection
T
X
T
Corresponding to the LIST teletext mode,
entering it as a three digit number using
you can select a page by
the NUMBER buttons in
TOP mode.
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1.
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2.
You
3.
Corresponding to the LIST teletext mode,
page by entering its three digit page number
4.
The Δ / Ε button
can
along
the
you can select a
with the NUMBER
buttons in FASTEXT mode.
following
22
page.
can
be used to select the
preceding
or
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information,
or puzzles.
again to remove the information
such
solutions of riddles
as
Press this button
the
from
display.
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
page.
Press this button
again
to return to the normal
the
display.
1
2
3
4
5
6
7
8
9
UPDATE
Displays
the
top
the TV
picture
on
the
screen
while
for
waiting
0
teletext page. The display
will appear at the
left hand corner of the screen. When the updated
new
page is available then
page number.
will
display
Press this button to view the
updated
change
to the
teletext page.
PR
HOLD
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
Stops
PR
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this
button is
pressed
left-hand
corner
change
the
stop symbol is displayed
of the
screen
at the
top
and the automatic page
is inhibited.
To continue press this button
again.
T
X
T
MIX
Displays
picture.
the teletext pages
To switch the TV
picture
superimposed
off press this button
on
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
the teletext
again
to
remove
mode, press this button
the
display.
In
sub page
number. The sub page number is displayed at the
bottom of the screen. To hold or change the sub page,
press the RED/GREEN, Δ / Ε
Press again to exit this function.
or
to select
a
NUMBER buttons.
23
Connection of external
You
can
connect additional
S-VIDEO
equipment
such
equipment,
VCRs, camcorders
as
etc. to your set. Here shown may be somewhat different from your
set.
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
Aerial socket
VCR
AV3
AV1
IN
OUT
S-VIDEO
R
AUDIO
1.
Connect the RF out socket of the VCR to the aerial socket
on
L
the back of the set.
VIDEO
ANT IN
75Ω
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
VCR
4.
stored.
5.
S-VIDEO
Press the PLAY button
on
the VCR.
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
Audio/Video in/out sockets
VCR
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
AV2
(L/MONO)
PF-60A30
(R)
AUDIO
VDEO
of the set.
S-VDEO
2.
If the VCR is connected to the AV1 sockets
on
the back of the
set, press the TV/AV button to select AV1. You should select
VCR
AV2 if the VCR is connected to the AV2 sockets
AV3
AV1
IN
on
the front of
the set.
OUT
S-VIDEO
R
AUDIO
3.
L
VIDEO
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
on
the
screen.
ANT IN
75Ω
You
also record programmes received
out sockets.
can
by
the TV
video
on
tape via audio/video
VCR
AV2
S-VIDEO
VIDEO
L/MONO
AUD O
R
Euro scart socket
VCR
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket
2.
S-VIDEO
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
on
the back of the set.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket. If Auto AV : On is selected, the set will switch to AV3
mode
automatically. Otherwise, press the TV/AV button
remotecontrol handset to select AV3.
VCR
The VCR
AV3
AV1
IN
R
playback picture
appears
on
the
on
the
screen.
OUT
S-VIDEO
AUDIO
L
VIDEO
ANT IN
75Ω
VCR
24
You
can
record programmes received
by
the TV
on
video
tape.
Connection of external
S-video/Audio in sockets
equipment
(S-AV)
When
connecting a S-VHS VCR to
picture quality will be further improved.
the S-VIDEO
socket, the
S-VIDEO
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
1.
socket
2.
on
the front
or
back of the set.
S-VIDEO VCR
Connect the audio cable from the S-VHS VCR to the AUDIO IN
sockets
3.
3
Connect the S-video socket of the S-VHS VCR to the S-VIDEO
on
the front
back of the set.
or
If the S-VHS VCR is connected to the AV 1 sockets
on
the
back of the set, press the TV/AV button to select AV1. You
AV2
(L/MONO)
PF-60A30
(R)
AUDO
VIDEO
S-VIDEO
should select AV2 if the S-VHS VCR is connected to the AV 2
sockets
4.
on
the front of the set.
Press the PLAY button
The VCR
on
playback picture
S-VIDEO VCR
the VCR.
appears
on
the
screen.
AV3
AV1
IN
Note
OUT
R
:
S-VIDEO
AUDIO
L
VIDEO
a.
If you have a mono
VCR to the AUDIO L
VCR,
connect the audio cable from the
(MONO)
socket
on
the front
panel
of the
ANT IN
75Ω
set.
b.
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR
simultaneously, only
the S-VIDEO
can
S-VIDEO VCR
be
received.
AV2
S-VIDEO
VIDEO L/MONO AUD O R
S-VIDEO VCR
25
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains
switched
plug-(plugged
on)
Is the TV switched
Try
in and
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
26
(VCR only)
Download PDF