LG | PF-60A30 | LG PF-60A30 Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
Model number:
Serial number:
P/NO : 3828VA0139A
(MP87A,
007W
TX)
and
require
quote this
service.
Contents
Installation
3
Location and function of controls
4
Remote control handset
Battery installation
Front panel : PF-60A30/PF-43A20
Basic
7
operation
On and off
Programme selection
adjustment / Mute function
On screen language selection (option)
Volume
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
9
Setting
Fine
tuning
Programme
edit
Picture adjustment
Picture adjustment
13
Convergence
Sound adjustment
Sound adjustment
15
Stereo/Dual reception
NICAM reception
Sound output selection
Other functions
TV and AV modes / Child lock
Auto
17
sleep
Off timer / On timer
Auto demonstration
Calling
PIP
a
programme table
20
operation (option)
On and off / Programme selection for sub
Input mode selection for sub picture
picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext
(option)
21
Switch on/off
LIST mode / TOP mode / FASTEXT mode
Special teletext functions
Connection of external equipment
Aerial socket
Euro scart socket
Audio/Video in/out sockets
S-video/Audio in sockets (S-AV)
check list
Troubleshooting
2
24
26
Installation
Contents
Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC power to
the set. In the event of thunderstorms
out the aerial and mains
or
powercuts, please pull
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
+75§U on
Connect the aerial cable to the socket marked
For the best
cover.
reception
an
the back
outdoor aerial should be used.
Location
Position your set
so
that
no
bright light
or
sunlight
falls
directly
onto the screen. Care should be taken not to expose the set to
any unnecessary vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow of air. Do not
cover
the ventilation
Do not
on
place
the set
openings on the
on a sloping or
the bottom of the set may
back
cover.
unstable
cause
area as
it to
move
the casters
and to be
damaged.
3
Location and function of controls
Contents
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
Before you use the remote control handset,
batteries. See the next page.
1
POWER
install the
MUTE
1.
2
please
1
2
3
I/II
4
5
6
PSM
POWER
switches the set
2.
3
on
8
PIP
0
standby
or
off to
standby.
MUTE
switches the sound
7
from
on or
off.
TV/AV
9
3.
NUMBER BUTTONS
switch the set
TEXTMENU
4.
from
on
PIP BUTTONS
standby
directly
or
select
a
number.
(option)
PIP
switches the sub
picture
on or
off.
PR+/-
PR
selects
VOL
VOL
OK
a
programme for the sub
picture.
SWAP
alternates between main and sub
PR
picture.
INPUT
PR-
PR+
PSM
SSM
SWAPINPUT
selects the
4
mode for the sub
input
picture.
SIZE
DUAL
adjusts
LIST
5
SIZE
the sub
picture
size.
STILL
STILL POSITION 9/4 PIP
freezes motion of the sub
6
T
X
T
PIP
picture.
POSITION
M
relocates the sub
START LENGTHSP/LPON/OFF
picture
in clockwise direction.
9/4 PIP
7
V
C
R
CH
QSR
REW
PLAY
switches
FF
sub
CH
P/STILLSTOP
REC
on or
off the programme
pictures.
5.PSM (Picture Status
recalls your preferred
6.
scan
SSM
Memory)
picture setting.
(Sound Status Memory)
preferred sound setting.
recalls your
7.VCR BUTTONS
control
4
a
(option)
LG video cassette recorder.
mode
through
9
or
4
Location and function of controls
8.DUAL
selects the
selects
9.
language during dual language broadcast.
sound during stereo broadcasts.
mono
TV/AV
selects TV
or
AV mode.
10. MENU
selects
a menu.
POWER
11.
¡a/¡a (Programme Up/Down)
on from standby.
switches the set
selects
a
programme
or a menu
MUTE
1
2
3
I/II
4
5
6
PSM
8
item.
5
¢¸/¢º(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
7
8
TV/AV
9
9
PIP
TEXTMENU
0
OK
10
accepts your selection
or
displays
the current mode.
12.LIST
display
the programme table.
PR
13.TELETEXT BUTTONS
These buttons
are
For further details,
(option)
used for teletext.
see
VOL
VOL
OK
the 'Teletext' section.
11
PR
In teletext mode, the PR+/-, SWAP and INPUT buttons
used for teletext function.
Note
:
are
PR-
PR+
PSM
SSM
SWAPINPUT
DUAL
LIST
8
12
SIZE
STILL POSITION 9/4 PIP
T
X
T
Battery
M
installation
START LENGTHSP/LPON/OFF
The remote control handset is
powered by
two AA
type batteries.
To load the batteries, turn the handset over and slide open the
battery compartment. Install two batteries as indicated by the
polarity symbols(
Note
:
To avoid
13
PIP
+
and
-
)
V
C
R
CH
CH
QSR
REW
PLAY
P/STILLSTOP
FF
REC
marked inside the compartment.
damage from possible battery leakage,
batteries if you do not plan to
extended period of time.
use
the
remove
the remote control handset for
an
5
Location and function of controls
Front
panel
10
1
MAIN
POWER
<SIDE OF TV>
PF-60A30 series
*
TV/AV
SSM
PSM
MENU
OK
VOL
PR
/I
STAND BY
AV
2
6A3
R
ONO
V
A
D
3
1.
MAIN POWER
4
5
6
7
(on the side of TV)
switches the set
2.
11
on or
off.
AUDIO/VIDEO(or S-VIDEO) IN SOCKETS
(AV 2)
Connect the audio/video(or S-video) out
sockets of external equipment to these
sockets.
O
selects
8.
a
programme
or a menu
item.
POWER
switches the set
on
from
standby
or
off to
standby.
9.POWER / STANDBY INDICATOR
or
AV mode.
standby
dims when the set is switched
on.
10.REMOTE CONTROL SENSOR
4.MENU
a menu.
11. PSM
or
displays
the current
recalls your
mode.
6.¢¸/¢º(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
(Picture Status Memory)
recalls your preferred picture setting.
SSM (Sound Status Memory)
OK
accepts your selection
6
D
illuminates when the set is in
selects TV
5.
O
7.¡a/¡a (Programme Up/Down)
switches the set on from standby.
3.TV/AV
selects
VD
2
9
8
O
*
preferred
sound
CASTERS (on the bottom)
turn and move the set
easily.
setting.
mode.
Location and function of controls
*
PF-43A20
Front
STAND BY
TV/AVMENU
OK
panel
VOL
AV2
PR
S-VIDEO
10
1
1.
on or
off.
AUDIO/VIDEO(or S-VIDEO) IN SOCKETS
(AV 2)
Connect the audio/video(or S-video) out
sockets of external equipment to these
selects
8.
programme
or a menu
item.
POWER
on
from
standby
or
off to
standby.
selects TV
or
9.POWER / STANDBY INDICATOR
AV mode.
illuminates when the set is in
4.MENU
standby
dims when the set is switched
a menu.
on.
10.REMOTE CONTROL SENSOR
OK
accepts your selection
*
or
mode.
6.¢¸/¢º(Volume Down/Up)
6-1
a
switches the set
3.TV/AV
5.
R
adjusts the volume.
adjusts menu settings.
7.¡a/¡a (Programme Up/Down)
switches the set on from standby.
sockets.
selects
L/MONOAUD O
2
74
5 8 69
MAIN POWER
switches the set
2.
3
VIDEO
displays
the current
CASTERS (on the bottom)
turn and move the set
easily.
mode.
Basic
operation
Contents
On and off
1.Press the main power button
on
the side of the set to switch the
set on.
2.
3.
If the set is in
standby mode, press
or
NUMBER buttons
on
fully.
on
Press the POWERbutton
4.Press the main
:
¡a/¡a,TV/AV
on
the remote control handset
once
The set reverts to
more.
Note
the POWER,
the remote control handset to switch it
standby.
power button again
If, while the
to switch the set off.
POWER
connected the set will switch
on
when the
plug is dismains plug is replaced in
MUTE
set is switched on, the mains
1
2
3
4
5
6
7
8
9
the mains power socket.
selection
Programme
You
can
select
a
programme number with the
¡a/¡a
or
TV/AV
MENU
0
NUMBER
buttons.
Volume
adjustment
Press the
¢¸/¢º
button to
adjust
the volume.
PR
VOL
Mute function
VOL
PR
Press the MUTEbutton. The sound is switched off and the
MUTEappears.
You
can
cancel it
by pressing
the MUTE,
display
¢¸/¢º,
SSMor DUALbutton.
SSM
On
screen
The
menu can
language
be
selection
displayed
your language.
on
the
DUAL
(option)
screen
in the desired
language.
First select
1. Press the MENUbutton to display the Main menu.
2. Press the ¢¸/¢º button to select the Function menu icon
3.Press the OKbutton to display the Special function menu.
4.Press the ¡a/¡a button to select Language.
5.Set the desired language with the ¢¸/¢º button.
6.Press the OKbutton.
.
7
On
screen menus
The
an
dialogue
operator
also
Contents
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
MENU
Press the MENUbutton to display the Main menu.
Press the ¢¸/¢º button to select each menu icon.
The selected menu icon changes from green to purple.
3.Press the OKbutton to display the sub menu.
4.Press the ¡a/¡a button to select a menu item.
The selected menu item changes from green to purple.
5. Press the ¢¸/¢º button to change the setting of a menu item or
OKbutton to display the sub menu.
Note :
a. The menus automatically disappear in about 1 minute if you do
not press a button.
b. In the AV mode, the Station menu icon is not selected.
c. In the teletext mode, menus are not displayed.
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
PR
VOL
OK
VOL
¡a¡a
OK
TV/AV
PR
Station
menu
(TV mode)
Picture
Standard
Game
Mild
Cinema
User
Convergence
¡a¡a
OK
Picture
TV/AV
menu
Sound
EqualizerOOOOOOCinema
Station
BalanceOOOOOOOOOOOO00
¢¸¢º
OK
TV/AV
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
Main
menu
¡a¡a ¢¸¢º
Sound
OK
TV/AV
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
¡a¡a ¢¸¢º
OK
Function
8
TV/AV
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme
numbers (00 to 99). Once you have preset the stations, you will be
able to use the ¡a/¡a or NUMBER buttons to scan the stations you
programmed.
Stations
can
be tuned
Auto programme
All stations that
can
recommended that you
1. Press
2.Press
3.Press
4.Press
5.Press
using
automatic
or
are
stored
auto programme
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
¡ª¡
be received
Station
Station
manual modes.
tuning
use
Contents
during
OOKOTV
AV
this method. It is
installation of this set.
by
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Station menu icon
the OK button to display the Stationmenu.
the ¡a/¡a button to select Auto programme.
the OK button to display the Auto programmemenu.
POWER
.
AutoOprogramme
1
2
3
4
5
6
7
8
9
TV/AV
StorageOfromOOOOOOOO01
SystemOOOOOOOOOOOOAUTO
¡a¡a ¢¸¢º
6.
7.
8.
9.
OK
TV/AV
0~9
button to select Storage from. Select the
beginning programme number with the ¢¸/¢º button or
NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the ¡a/¡abutton to select System.Select a TV system
with the ¢¸/¢º button; AUTO,M ,BG, I or DK.
Press the
MENU
0
Start
¡a/¡a
PR
VOL
OK
VOL
PR
Press the ¡a/¡a button to select Start.
Press the OKbutton to begin auto programming.
AutoOprogramme
StorageOfromOOOOOOOO04
SystemOOOOOOOOOOOOAUTO
PR.O27OOCHO30OOOOOO{{{
..................
OK
All receivable stations are stored.
The programme number and channel number being searched
appear below the display System. The channel number is
assigned
and stored with CHfor television
or
CC for cable
channels.
To stop auto
programming, press
the OKbutton.
When auto programming is completed, the Programme edit
mode appears on the screen with the channel number. See the
'Programme edit' section to edit the stored programme.
10. Press the TV/AVbutton to return to normal TV
viewing.
Note:a.If there is a sound noise in some channels after auto
is completed, re-adjust System to M, BG, I or DK in
Manual programme tuning. Refer to 'Manual programme tuning.
b.During auto programming is performing, pictures of scanned
programmes appears through the sub picture.
programming
9
Setting up
Station
Manual programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
OK
¡a¡a
TV stations
tuning
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a
station name with five characters to each programme number.
TV/AV
1. Press the MENUbutton to
2.Press the
¢¸/¡a
display
the Main
button to select the Station
3.Press the OK button to
display
menu.
menu
icon
.
the Stationmenu.
to select Manual programme.
5.Press the OK button to display the Manual programme
4.Press the
¡a/¡a button
menu.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
1
2
ChannelOOOOOOOV
3
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOOOCHO01
4
5
6
7
8
9
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
¡ª¡
MENU
0
O¢'¢"OOKOTV
AV
¡a/¡a button to select System.Select a TV system
¢¸/¢º button; BG,I,DK or M.
7.Press the ¡a/¡a button to select Channel. Press the ¢¸/¢º
button to select V/UHFor CATVas required. If possible, then
select the channel number directly with the NUMBER buttons.
8.Press the ¡a/¡a button to select Search.
9.Press the ¢¸/¢º button to commence searching. If a station is
6.Press the
with the
PR
VOL
OK
PR
VOL
found the search will stop.
10.If this station is the
one required, press the ¡a/¡a button to
Select
the desired programme number with
Storage.
the ¢¸/¢º button or NUMBER buttons. Any number under 10 is
select
numeric '0' in front of it, i.e. '05' for 5.
display Stored will appear.
12.To store another station repeat steps 6 to 11.
entered with
a
11.Press theOKbutton to store it. The
Assigning
station
a
1.Press the
¡a/¡a
name
button to select Name.
2.To select your desired first character, press the ¢º button then
¡a button. You can use the alphabet Ato Z, a blank, ., +, and
_
the numeric 0to 9.
With the
¡a button you can select in the opposite direction.
position by pressing the ¢º button and
3.Select the next
then
take your choice of the second character, and so on.
4.Press the ¢º button to finish assigning a station name.
5.Press theOKbutton to store it. The
6.To
10
assign
another station
name
Stored will appear.
repeat steps 1 to 5.
display
TV stations
Setting up
Auto AV
setting
scart socket. The set is
AV
switched to AV-3 mode when
automatically
But if you want to keep
mode, set Auto AV to Off.
1.Press the ¡a/¡a button to select Auto AV.
an
is
signal
Station
Station
If your VCR outputs a switching voltage when it is switched to
playback, select Auto AV On with the VCR connected to Euro
input.
on
watching
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
TV
¡a¡a
OK
TV/AV
¢¸/¢º button to select Onor Off.
¡a/¡a button to select Storage. Select the desired
programme number with the ¢¸/¢º button or NUMBER buttons.
4.Press theOKbutton. The display Stored will appear.
2.Press the
3.Press the
5.To set another programme repeat steps 1 to 4.
Press the TV/AVbutton to return to normal TV
Fine
viewing.
tuning
Normally
fine
tuning
is
only necessary
if
reception
1
2
3
4
5
6
7
8
9
TV/AV
is poor.
MENU
0
1.Repeat
'Manual programme
tuning' steps
1 to 5.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
PR
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
¡a¡a ¢¸¢º
OK
VOL
TV/AV
OK
VOL
PR
2.Press the
¡a/¡a
button to select Fine. Press the
fine tune for the best
3.Press the
¡a/¡a
picture
¢¸/¢º
button to
and sound.
button to select
Storage. Select
the desired
programme number with the ¢¸/¢º button or NUMBER buttons.
4.Press theOKbutton. The display Stored will appear.
5.Press the TV/AVbutton to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
viewing.
by yellow
number
11
Setting up
Station
menu
Programme
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
¡a¡a
OK
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy to the next programme numbers.
1. Press
2.Press
3.Press
4.Press
5.Press
TV/AV
TV stations
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Station menu icon
the OK button to display the Stationmenu.
the ¡a/¡a button to select Programme edit.
the OK button to display the Programme editmenu.
.
ProgrammeOedit
OO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
¢º00OCHO05
1
2
? Delete
? Move
3
¡a¡a ¢¸¢º
4
5
OK
? Copy
? Skip
TV/AV
6
Deleting
7
8
TV/AV
9
MENU
0
a programme
1.Select a programme to be deleted with the ¡a/¡a or ¢¸/¢º button.
2.Press the RED button twice.
The selected programme is deleted and all the following
programmes are shifted up one position.
3.Press theTV/AVbutton to return to normal TV
OK
a
1.Select
a
programme
programme to be
2.Press the GREEN button.
PR
VOL
Copying
VOL
viewing.
copied
with the
¡a/¡a or ¢¸/¢º
All the following programmes are shifted down
3.Press theTV/AVbutton to return to normal TV
button.
position.
viewing.
one
PR
Moving
a programme
1.Select a programme to be moved with the ¡a/¡a or ¢¸/¢º button.
2.Press the YELLOW button. The selected programme is in yellow.
3.Move the programme to the desired programme number with
the ¡a/¡a button.
The selected programme moves through the programme list in
the direction selected.
4.Press the YELLOW button again to release this function.
5.Press theTV/AVbutton to return to normal TV
viewing.
Skipping
a programme
1.Select a programme to be skipped with the ¡a/¡a or ¢¸/¢º button.
2.Press the BLUE button.
The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
The programme returns to green and the skip is cancelled.
4.Press theTV/AVbutton to return to normal TV viewing.
During programme selection, with the ¡a/¡a button the skipped
programme can not be found. If you want to find the skipped
programme directly enter the programme number with the
NUMBER buttons or select it in the programme edit or table
mode.
12
Picture
You
adjustment
select your preferred picture setting; Standard, Game,
as you prefer. Also you can adjust picture contrast,
brightness, colour intensity, sharpness and tint (NTSC input only)
to the levels you prefer.
can
Mild, Cinema,
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Picture menu icon
3.Press the OK button to display the Picturemenu.
Contents
Picture
Picture
menu
Standard
Game
Mild
Cinema
User
Convergence
.
¡a¡a
OK
TV/AV
Standard, Game, Mild, Cinema, User
1.Press the ¡a/¡a button to select Standard, Game, Mild,
Cinema or User.
2.Press the OK button.
Picture
ContrastOOOOOOOOOOO100
BrightnessOOOOOOOOOO75
ColourOOOOOOOOOOOOOO50
SharpnessOOOOOOOOOOO50
TintOOOOOOOOOOOOOOOO00
1
2
3
4
5
6
7
8
9
YNROOOOOOOOOOOOOOOOOff
...................
¡a¡a ¢¸¢º
OK
PSM
TVAV
3.Press the ¡a/¡a button to select the desired picture item.
4.Press the ¢¸/¢º button to make appropriate adjustments.
5.Press the OK button. These picture setting is stored in User
MENU
0
menu.
These picture settings, except for User, are temporarily stored
and if the TV switches off and then on, the adjusted level
returns to the factory preset settings.
Note :
a. Tint can be selected for the NTSC only.
b. The picture item YNR reduces picture noise if you select On.
PR
VOL
OK
VOL
PR
To recall your preferred setting, press the PSMbutton until the
desired picture (Standard, Game, Mild, Cinema, User)
appears.Standard, Game, Mildand Cinema are programmed
at the factory for good picture reproduction appropriate to each
programme chacracter.
PSM
13
Picture
Picture
menu
Convergence
Picture
This function enables you to adjust the colour convergence of
screen during receiving the signals. When the set is first installed
Standard
Game
Mild
Cinema
picture may be
ghosts (red, green, blue). This problem
or
User
Convergence
¡a¡a
OK
adjustment
TV/AV
it is relocated, the
unstable with three colour
can
be solved
by adjusting
the colour convergence.
1.Press the
¡a/¡a button
to select
2.Press the OKbutton to
If the
display
display
Convergence.
the
Convergence mode.
ghosts, the
+are unstable with three colour
convergence needs to be
colour
adjusted.
Convergence
TV/AV
MENU
OKOTV
If the
display
AVO
is white, colour convergence
adjustment
is not
necessary.
PR
3.Press the OKbutton to
VOL
OK
PR
VOL
The
adjust
displayOK TV/AV¡ª¡¢
Press it
again
to select the
the colour convergence.
is selected in red.
display
OK
TV/AV¢¸/¢º
in
blue.
4.Press the
¡a/¡a and ¢¸/¢º buttons to superimpose the display
+(red or blue) with the green one.
The display +is moved to the left, right, up or down by pressing
the ¢¸/¢º, ¡a,¡abuttons.
5.If the red and blue display +are superimposed with the green
one, the display +will be changed to yellow or cyan.
6. Press the TV/AVbutton to return to normal TV viewing.
14
Sound
Sound
You
adjustment
adjustment
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Sound menu icon
3.Press the OK button to display the Soundmenu.
1.Press the
2.Press the
Sound
Sound
select your preferred sound setting; Cinema, Sports,
Music, Speech, as you prefer. Also you can adjust the sound frequency to the levels you prefer. The surround sound creates an all
around sound as in a concert hall and UBB(Ultra Bass Booster)
stress and emphasizes heavy sound and AVL(Auto Volume
Leveller) automatically keeps on an equal volume level even if you
change programmes.
can
Equalizer
Contents
menu
EqualizerOOOOOOCinema
BalanceOOOOOOOOOOOO00
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
¡a¡a ¢¸¢º
OK
TV/AV
.
¡a/¡a button to select Equalizer.
¢¸/¢º button to select Cinema, Sports, Music,
Speech or User.
3.Press the OK button
In case of Cinema, Sports, Music, Speech, each corresponding equalizer is displayed on the screen. Cinema, Sports,
Musicand Speech are programmed at the factory for good
Equalizer
Equalizer
+10
+10
Cinema
Cinema
Sports
Sports
0
Music
User
-10
OK
User
-10
3.3 10K
TV/AV
(Cinema, Sports, Music,
Speech)
sound
MENU
Speech
0.1 0.3 1.0
¡a¡a
0
Music
Speech
reproduction appropriate
0.1 0.3
¡a¡a ¢¸¢º
OK
1.0
3.3
10K
TV/AV
(User)
PR
to each programme character.
In case of User, select the sound band with the ¢¸/¢º button and
make appropriate sound level with the ¡a/¡abutton as you prefer.
4.Press the OK button. In case of User only, the display Stored
will appear.
Balance
1.Press the ¡a/¡a button to select Balance.
2.Press the ¢¸/¢º button to adjust the balance level.
3.Press the OKbutton. The display Stored will appear.
VOL
OK
VOL
PR
SSM
UBB
1.Press the ¡a/¡a button to select UBB.
2.Press the ¢¸/¢º button to select On or Off.
3.Press the OKbutton. The display Stored will appear.
Surround
1.Press the ¡a/¡a button to select Surround.
2.Press the ¢¸/¢º button to select On or Off.
3.Press the OKbutton. The display Stored will appear.
AVL
1.Press the ¡a/¡a button to select AVL.
2.Press the ¢¸/¢º button to select On or Off.
3.Press the OKbutton. The display Stored will appear.
To recall your preferred setting, press the SSMbutton until the
desired sound (Cinema, Sports, Music, Speech, User)
appears.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
I/ II
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the DUAL button. In mono reception the depth
of sound is improved. To switch back to stereo, press the DUAL
button again.
mono
Language selection
for dual
language broadcast
If a programme received in two languages
switch to DUAL I, DUAL II or DUAL I II by
repeatedly.
DUAL I sends the
DUAL II sends the
DUAL I II sends
NICAM
DUAL
(dual language), you can
pressing the DUAL button
primary broadcast language to the loudspeakers.
secondary broadcast language to the loudspeakers.
a
separate language
to each
loudspeaker.
reception(option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the DUAL button repeatedly.
1. When NICAM mono is received, you can select NICAM
MONO or FM MONO.
2. When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM MONO.
3. When NICAM dual is received, you can select DUAL I, DUAL
II or DUAL I II or MONO. When FM mono is selected the
display MONO appears on the screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loudspeakers.
Repeatedly press
L+R
:
L+L
:
R+R
16
:
the DUAL button to select the sound output.
Audio signal from audio L input is sent to left loudspeaker
and audio signal from audio R input is sent to right loud-
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Input.
5.Press the ¢¸/¢º button to select TV,AV1,AV2,AV3 SAV1 or
SAV2.
The five AV modes are :
AV 1 : VCR connected to the AV1sockets on the back
AV 2 : VCR connected to the AV2sockets on the front panel
AV 3 : VCR connected to the Euro scart socket on the back
SAV1 : VCR connected to the AUDIOand S-VIDEOsockets on
the back panel
SAV2 : VCR connected to the AUDIOand S-VIDEOsockets on
the front panel
6.Press the OKor TV/AVbutton.
To return to TV mode from AV mode press the ¡a/¡a or NUMBER buttons.
Contents
SpecialOfunction
Special
InputOOOOOOOOOOOOOOTV
function
AutoOsleepOOOOOOOOOff
menu
ChildOlockOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
¡a¡a ¢¸¢º
OK
TV/AV
.
Alternatively you
can
select the TV
or
AV mode
TV/AV
the
by pressing
MENU
TV/AVbutton.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorised viewing.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Child lock.
5.Press the ¢¸/¢º button on the remote control handset to select On.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
PR
VOL
OK
VOL
PR
With the lock on, the display Child lock appears on the screen if
any button(with the exception of /I button) on the front panel is
pressed while viewing the TV.
Auto
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Auto sleep.
5.Press the ¢¸/¢ºbutton on the remote control handset to select On.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
17
Other functions
Special
function
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Off timer
The off timer automatically switches the set to
preset time elapses.
standby
after the
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select Off timer.
5.Set the desired time period with the ¢¸/¢º button.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
.
¡a¡a ¢¸¢º
OK
TV/AV
On timer
The set
automatically
switches
on
after the preset time
elapses.
1. Press the MENUbutton to display the Main menu.
2.Press the ¢¸/¢º button to select the Function menu icon
3.Press the OK button to display the Special functionmenu.
4.Press the ¡a/¡a button to select On timer.
5.Set the desired time period with the ¢¸/¢º button.
6.Press the OKor TV/AVbutton to return to normal TV viewing.
POWER
.
TV/AV
MENU
PR
VOL
OK
PR
VOL
You can set the on/off timer from 10 minutes up to 12 hours 50
minutes in 10 minutes steps. The timer begins to count down from
the selected time period.
Note :
a. This set must be put into standby mode with the POWER button
on the remote control to operate the on timer function.
b. Two hours after the set is switched on by the on timer function it
will automatically switch back to standby mode unless a button
has been pressed.
c.
To view the remaining on/off time, select the Special function menu.
d. To cancel the set on/off time, set the on/off timer to --:--.
e. When you switch the main power off, the on/off time is reset.
Auto demonstration
Auto demonstration allows you to review all the
med in the set.
1. Press
2.Press
3.Press
4.Press
5.Press
program-
the MENUbutton to display the Main menu.
the ¢¸/¢º button to select the Function menu icon
the OK button to display the Special functionmenu.
the ¡a/¡a button to select Demonstration.
the OKbutton to start the demonstration.
When the demonstration reaches the last
from the beginning.
display,
To stop auto demonstration, press any button.
18
menus
it starts
again
Other functions
Calling
You
programme table
a
can
displaying
check the programmes stored in the memory
the programme table.
Displaying programme
by
table
Press the LISTbutton.
The programme table appears on the screen. One programme
table contains ten programmes as below.
ProgrammeOtable
¢"00OCHO05 OOO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
¡a¡a ¢¸¢º
Note
a.
OK
1
2
3
4
5
6
7
8
9
TV/AV
TV/AV
0
:
You may find some blue programmes.
edit mode.
They
are
skipped
in the
Programme
b.
Some programme numbers with the mark
programme table indicate there is
no
station
-----
name
shown in the
assigned.
PR
Selecting
a
programme in the programme table
Select upper
or
lower programme with the
¡a/¡a
button and left
VOL
or
OK
VOL
PR
right programme
with the
programmes is green and
¢¸/¢º
skipped
button. The colour of normal
programme is blue.
Then press the OKbutton.
The set switches to the chosen programme number.
Paging through
There
are
programme table
ten programme table pages in which contain 100
programmes.
the pages.
Switching
a
LIST
Pressing
the
¡a/¡aor ¢¸/¢ºbutton repeatedly
turns
back to TV mode
Press the TV/AVor NUMBER buttons
during programme
table
mode.
19
PIP
operation (option)
Option:
PIP is optional function,
so
that
only
Contents
the set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Programme
selection for sub
picture.
picture
Press the PR +/-buttons. The selected programme number is
displayed at the left upper side of sub picture.
Input
mode selection for sub
picture
Press the INPUTbutton while the sub
main picture.
Each time this button is pressed, each input mode for the sub
is displayed as shown below at the left upper side of sub
PIP:
(programme number)
SAV2
PR
VOL
OK
Swapping
VOL
PR
PR+
SWAPINPUT
Sub
AV1
PIP:
SAV1
picture
exchange
PIP:
AV2
AV3
pictures
the main and sub
pictures.
size
Repeatedly press the SIZEbutton to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture,
followed by 1/9.
STILLPOSITION 9/4 PIP
PIP
PIP:
between main and sub
Press theSWAPbutton to
Sub
SIZE
remains within the
picture
picture.
PIP
PR-
picture
picture
freeze
Press the STILLbutton to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITIONbutton repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 9 or 4
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the 9/4 PIP button. 9 sub pictures appear and search all the
stored stations.
Press this button again. At this time 4 sub pictures search them.
Press the 9/4 PIPbutton once more. The 9 or 4 sub pictures switch
off.
If you press the SWAPbutton while the desired station is being
are exchanged so the station
being searched appears on the main picture.
searched, the main and sub picture
20
Teletext
Teletext is
an
teletext system
Teletext is
a
optional function,
can
therefore
(option)
only
a
Contents
set with the
receive the teletext broadcast.
free service broadcast
information
gives up-to-the-minute
programmes, share prices
by
on
most TV stations which
news,
and many other
The teletext decoder of this TV
can
weather, television
topics.
support the LIST, TOP and
FASTEXT systems. LIST
pages which are selected
number. TOP and
(standard teletext) consists of a number of
by directly entering the corresponding page
FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TEXT
Switch on/off
Press the TEXTbutton to switch to teletext. The initial page
selected page appears on the screen.
Two page numbers, TV station name, date and time
are
last
displayed
headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXTor TV/AVbutton to switch off teletext. The previous
on
the
or
TV/AV
screen
mode reappears.
PR
LIST mode
PR
If the TV is in TOP
or
FASTEXT mode, press the
M
button to
switch to LIST mode.
Page
1.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then re-
M
enter the correct page number.
2. The
¡a/¡a button
following page.
can
be used to select the
preceding
or
21
Teletext
(option)
Programming a colour button
Four teletextpage numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Using
the NUMBER buttons, select the page you wish to
programme.
2. Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
3.
of the
screen
Press
a
can
1
2
3
4
5
6
7
8
9
change
to "000?".
colour button to store the page number. From
select this page with the same coloured button.
you
4. The three other coloured buttons
are
programmed
in the
now
same
on,
way.
TOP mode
The
0
user
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Group/block/page
PR
selection
1. With theBLUEbutton you can progress from block to block.
2. Use the YELLOWbutton to proceed to the next group with
automatic overflow to the next block.
OK
PR
3. With the GREENbutton you can proceed to the next existing
page with automatic overflow to the next group. Alternatively the
button
¡a
can
be used.
4.TheREDbutton
the
T
X
T
¡a button
can
permits
to return to
previous
selection.
Alternatively
be used.
Direct page selection
Corresponding to the LIST teletext mode, you can select a page by
entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
1.
selection
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2. You
3.
can
along
the
Corresponding to the LIST teletext mode, you can select a page
by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
4. The
¡a/¡a
button
following page.
22
can
be used to select the
preceding
or
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
as
display concealed information,
or puzzles.
again to remove the information
Press this button
the
such
solutions of riddles
from
display.
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
page.
Press this button
again
to return to the normal
the
display.
1
2
3
4
5
6
7
8
9
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for
0
will appear at the
teletext page. The display
top left hand corner of the screen. When the updated
will change to the
page is available then display
the
new
page number.
Press this button to view the
updated
teletext page.
PR
HOLD
(STOP)
the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
Stops
usually,
shown
on
button is
pressed
left-hand
corner
change
the
PR
below the time. When this
screen
the stop symbol is displayed at the top
of the screen and the automatic page
is inhibited.
To continue press this button
again.
T
X
T
MIX
Displays
picture.
the teletext pages
To switch the TV
picture
superimposed
off press this button
on
the TV
again.
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to remove the
display.
In
the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the
bottom of the
screen.
To hold
or
press the RED/GREEN, ¡a/¡a
Press again to exit this function.
the sub page,
NUMBER buttons.
change
or
23
Connection of external
You
equipment
connect additional
can
such
equipment,
Contents
VCRs, camcorders
as
etc. to your set. Here shown may be somewhat different from your
set.
S-VIDEO
AV1
(R)
AUDIO
(L)
VIDEO
Aerial socket
OUT
IN
ANT IN
75Ω
AV3
1.
3
Connect the RF out socket of the VCR to the aerial socket
on
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
3.
VCR
stored.
5.
Press the PLAYbutton
on
the VCR.
S-VIDEO
AV1
(R)
AUDIO
(L)
VIDEO
Audio/Video in/out sockets
OUT
IN
ANT IN
75Ω
1.
AV3
Connect the audio/video out sockets of the VCR to audio/video
3
in sockets of the set and in sockets of the VCR to out sockets of
the set.
2.
If the VCR is connected to the AV1sockets
on
the back of the
set, press the TV/AVbutton to select AV1. You should select
VCR
AV2if the VCR is connected to the AV2sockets
on
the front of
the set.
3.
Press the PLAYbutton
The VCR
the VCR.
on
the
screen.
PF-60A30
AV2
(L/MONO)
on
playback picture appears
(R)
AUDIO
VIDEO
S-V DEO
You
also record programmes received
out sockets.
can
by
the TV
on
video
tape via audio/video
VCR
Euro scart socket
1.Connect the Euro scart socket of the VCR to the Euro scart
S-VIDEO
socket
AV1
(R)
AUDIO
(L)
on
the back of the set.
2.Press the PLAYbutton
VIDEO
on
the VCR.
OUT
IN
ANT IN
75Ω
AV3
If your VCR outputs
socket. If AUTO AV
a
:
connect to Euro scart
switching voltage
ONis selected, the set will switch to AV3
3
mode
automatically. Otherwise, press the TV/AVbutton
remotecontrol handset to select AV3.
The VCR
playback picture appears
on
the
on
the
screen.
VCR
You
24
can
record programmes received
by
the TV
on
video tape.
Connection of external
S-video/Audio in sockets
equipment
(S-AV)
connecting a S-VHS VCR to
picture quality will be further improved.
S-VIDEO
the S-VIDEO socket, the
When
AV1
(R)
AUDIO
(L)
VIDEO
OUT
1.
Connect the S-video socket of the S-VHS VCR to the S-VIDEO
socket
2.
on
or
back of the set.
ANT IN
75Ω
AV3
3
Connect the audio cable from the S-VHS VCR to the AUDIO IN
sockets
3.
the front
IN
on
the front
or
back of the set.
If the S-VHS VCR is connected to the AV 1 sockets
on
the back
of the set, press the TV/AV button to select AV1. You should
S-VIDEO VCR
select AV2 if the S-VHS VCR is connected to the AV 2 sockets
on
4.
the back of the set.
Press the PLAY button
The VCR
Note
a.
the VCR.
playback picture appears
on
the
screen.
:
If you have
a mono
to the AUDIO L
b.
on
VCR,
(MONO)
connect the audio cable from the VCR
socket
on
the front panel of the set.
AV2
(L/MONO)
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR
simultaneously, only
the S-VIDEO
can
AUDIO
PF-60A30
(R)
V DEO
S-VIDEO
be
received.
S-VIDEO VCR
25
Troubleshooting
check list
Contents
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
26
(VCR only)
Download PDF

advertising