LG | RT-21FD70V | LG RT-21FD70V Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0552A
(MC049C,
138E/F
TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic
7
operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On
On
screen
language
selection
(option)
8
screen menus
Menu selection
Setting up
TV stations
9
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
the programme table
Calling
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
15
Sound
17
adjustment (option)
(Sound Status Memory) / Sound adjustment
Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
SSM
Time
setting
Setting the
Auto sleep
20
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
21
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT /
24
Special
teletext functions
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
27
31
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be
panel of the set.
adjusted
with the buttons
on
the front
Remote control handset
8
MUTE
POWER
11
12
1
TV/AV
PSM
MENU
PICTURE
Before you use the remote control
teries. See the next page.
SSM/
16 1.
TV
SOUND
3
17
INDEX/
/
i
2.
TURBO/
POWER
switches the set
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
10
PR ()
5
3.
OK
VOL
VOL
MENU
standby.
select
a
4.
a menu.
selects
an
index page in the teletext mode
EYE/*
(only
TELETEXT
(option)
switches the eye function
123
5.
456
789
on or
off.
() /
() (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
scans
programmes
F / G
0
7
14
6
TEXT/MIX
SIZE
HOLD
UPDATE
LIST
TIME
OK
accepts your selection
6.
REVEAL Q.VIEW
?
FAVOURITE
SLEEP
M
returns to the
7.
13
EYE/
8.
displays
the current mode.
previously
viewed programme.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further
4
or
Q.VIEW
15
I/II/
9
PSM
details,
see
the 'Teletext' section.
(Picture Status Memory)
preferred picture setting.
recalls your
9.
FAVOURITE
selects
a
favourite programme.
10. TURBO PICTURE / SOUND BUTTON
selects Turbo
( With TELETEXT)
4
number.
(or INDEX)
selects
models). (option)
PR ()
2
handset, please install the bat-
picture
and sound.
(option)
Location and function of controls
11. MUTE
switches the sound
on or
off.
12. TV/AV
selects TV or AV mode.
switches the set on from
standby.
8
MUTE
13. I/II/*
(option)
selects the language during
selects the sound
dual
language
broadcast.
(option)
POWER
11
output.
1
TV/AV
PSM
MENU
PICTURE
SSM/
16
12
14. LIST
displays
the programme table.
SOUND
3
17
/
TURBO/
15. SLEEP
sets the
16. SSM/*
sleep
10
timer.
PR ()
(option) (Sound Status Memory)
preferred sound setting.
5
recalls your
OK
VOL
VOL
PR ()
17. SURROUND
(º/*) (option)
selects surround sound.
123
COLOURED BUTTONS
TELETEXT
models)
or
:
These buttons
are
used for teletext
(only
programme edit.
2
456
789
Battery installation
0
The remote control handset is
To load the
batteries,
powered by
two AAA
type batteries.
turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by 14
the polarity symbols ( + and
) marked inside the compartment.
-
6
LIST
FAVOURITE Q.VIEW
SLEEP
15
9
I/II/
13
EYE/
4
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended
period
of time.
( Without TELETEXT)
5
Location and function of controls
Front
panel
RT-21FD70 series
AV2
VIDEOL/MN
5
6
AUDIO
R
123
4
7
Side
1.
MAIN POWER
(ON/OFF)
switches the set
2.
on or
off.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched
3.
mode.
REMOTE CONTROL SENSOR
ers,
: Only use the supplied remote
they'll be not able to function.)
control handset.
(When you use
oth-
MENU
selects
5.
standby
on.
Note
4.
panel
a menu.
OK
accepts your selection
or displays
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
the current mode.
F / G
selects
a programme or a menu item.
switches the set on from standby.
6.
AUDIO/VIDEO IN SOCKETS
(AV2) (option)
Connect the audio/video out sockets of external
equipment
to these sock-
ets.
7.
HEADPHONE SOCKET
Connect the
(option)
headphone plug to this
socket.
Note : Shown is a simplified representation of front
may be somewhat different from your set.
6
or
side
panel.
Here shown
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
The set reverts to
4.
on
the remote control handset.
mode.
standby
Press the main power button
again
to switch the set off.
MUTE
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
TV/AV
SSM/
MENU
SOUND
TV
Programme
selection
You
a
can
select
programme number with the D / E
or
/
NUMBER
TURBO/
buttons.
PR ()
Volume
adjustment
OK
VOL
Press the F / G button to
adjust
VOL
the volume.
PR ()
Quick view
Press the Q.VIEW button to view the last programme you
were
123
watching.
456
Mute function
Press the MUTE button. The sound is switched off and the
W
You
display
789
appears.
can
cancel it
by pressing
the
MUTE,
F
/
G, SSM/*, I/II/*,
0
TURBO SOUND button.
On
screen
The
menu
language
can
First select your
1.
selection
be
displayed
language.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
Q.VIEW
I/II/
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
on screen
Press the OK
4.
Repeatedly
viewing.
or
displays
will appear in the selected
F button to select the
Special
language.
menu.
press the MENU button to return to normal TV
7
On
screen menus
The
an
dialogue between you and your set takes place on screen with
operator menu. The buttons required for the operating steps are
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
MUTE
POWER
TV/AV
SSM/
MENU
SOUND
TURBO/
the
setting
of
an
item in the sub
OK
VOL
pull-down
or
F/GorD/E.
menu
e.
play.
On
some
models, the Language will
not
display.
Auto programme
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
PR ()
()O}{OOKOMENU
()O}{O OKOMENU
Station
123
menu
Manual programme
Picture
456
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
789
()O}{OOKOMENU
0
()O}{O OKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
AVL
{
O1OOCO03OOO6OOSO17
DBS
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
Q.VIEW
()}{OOKOMENU
()O}{O OKOMENU
Sound
I/II/
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
TV programme
8
with
You can move to the higher level menu with OK
button and
to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In mono models, the Sound menu does not appear.
d. In some models, Tilt, Degauss, Game or Booster will not disor F
Station
PR ()
VOL
Change
menu
2
Setting up
TV stations
TV stations can be stored by programme numbers (0 to
you have preset the stations, you will be able to use the
D / E or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up to 100
99). Once
Note
:
In
some
models up to 200 TV stations
Auto programme
can
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
be stored.
tuning
()O}{OOKOMENU
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
MUTE
POWER
Auto programme
System
StorageOfrom
{
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
BG
TV/AV
SSM/
MENU
SOUND
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
TURBO/
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
OK
VOL
VOL
PR ()
123
456
789
select Start.
Note :
a.
Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
PR ()
0
Q.VIEW
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
MENU
I/II/
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11.
Repeatedly
viewing.
press the MENU button to return to normal TV
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Auto programme scan
To automatically scan the pictures of stored programmes, press
theD( DD ) or E( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
E
To
stop
auto programme
scanning,
Manual programme
()O}{O OKOMENU
press any button except VCR buttons.
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
MUTE
POWER
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
programme.
3.
Press the G button to
display
the Manual programme
menu.
Manual programme
TV/AV
SSM/
MENU
SOUND
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
{
TURBO/
()O}{OOKOMENU
4.
5.
PR ()
OK
VOL
VOL
PR ()
6.
7.
8.
123
456
789
0
Q.VIEW
9.
10.
11.
12.
13.
14.
I/II/
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
Press the D / E button to select Name.
3.
Press the G button
4.
on
the Name
Press the D button. You
and the
alphabet
can use a
With the E button you
Select the position by
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
can
opposite direction.
the F / G button and then take
{
character, and
()O}{OOKOMENU
so on.
MUTE
In
models, Booster is
can
{
{
press the MENU button to return to normal TV
(option)
some
{
ProgrammeOedit
FavouriteOprogramme
+, -, the numeric 0 to 9
select in the
pressing
Booster
Booster
blank,
menu.
AutoOprogramme
ManualOprogramme
A to Z.
5.
7.
pull-down
Station
1 to 3.
perform
an
optional
function.
Only
a
POWER
TV/AV
SSM/
MENU
SOUND
set with
this function.
TURBO/
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
PR ()
Booster to On.
OK
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
1
4.
VOL
Repeat
Press the D / E button to select On
down
or
Off
on
the Booster
pull-
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
VOL
PR ()
press the MENU button to return to normal TV
123
456
789
0
Q.VIEW
I/II/
11
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()O}{O OKOMENU
2.
Press the MENU button and then D / E button to select the
Station menu.
Press
the
G
button
and
then
D
E
/
button
to
select
Programme edit.
3.
Press the G button to
display
Programme
the
Programme edit
menu.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
MUTE
POWER
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
TV/AV
SSM/
DeleteOOOCopy
MoveOOOOOSkip
()}{O OKOMENU
MENU
SOUND
Deleting
TURBO/
1.
2.
programme
programme to be deleted with the D / E
Press the RED button twice.
a
The selected programme is deleted,
grammes are shifted up one position.
PR ()
OK
VOL
a
Select
VOL
PR ()
Copying
1.
2.
123
2.
3.
789
F / G button.
following
pro-
programme
F / G button.
programme to be copied with the D / E
Press the GREEN button.
or
All the
one
Moving
1.
456
a
Select
all the
or
a
following
programmes
are
shifted down
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
0
again
to release this function.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
Q.VIEW
I/II/
()}{OOMENU
Select
a
programme number
programme number to be
Skipping
a
1.
skipped
with the D / E
or
F / G
button.
2.
3.
Press the BLUE button. The
skipped programme turns to blue.
again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER butPress the BLUE button
tons
or
Repeatedly
12
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
Setting up
TV stations
Station
Favourite programme
This function lets you select your favourite programmes
1.
2.
Press the MENU button to select the Station
directly.
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
menu.
Press the G button and then D / E button to select Favourite
programme.
3.
AutoOprogramme
ManualOprogramme
()O}{O OKOMENU
Press the G button to
display
the Favourite programme
menu.
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
56n Ca 05
{
{
MUTE
POWER
TV/AV
SSM/
MENU
SOUND
}{O0_9O()OOKOMENU
4.
5.
Press the D / E button to select
-----.
a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
--
Select
front of
6.
7.
8.
it, i.e. '05' for
To store another programme, repeat
You can store up to 8 programmes.
Press the OK button.
Repeatedly
viewing.
TURBO/
5.
steps
4 to 5.
press the MENU button to return to normal TV
Repeatedly press the FAVOURITE button to select stored favourite
programmes.
PR ()
OK
VOL
VOL
PR ()
123
456
789
0
Q.VIEW
FAVOURITE
I/II/
13
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display
the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
MUTE
O3OOSO66OOO8OOCO09
POWER
O4OOSO67OOO9OOCO11
TV/AV
SSM/
()}{O OKOMENUOO
MENU
SOUND
TURBO/
PR ()
OK
VOL
VOL
PR ()
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Select
a
123
456
789
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST button to return to normal TV
0
LIST
Q.VIEW
I/II/
14
viewing.
Picture
PSM (Picture Status
adjustment
Picture
Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
1.
2.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
a
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
picture
()O}{OOKOMENU
Picture
PSM
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
MUTE
POWER
()O}OOKOMENU
or F button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
TV/AV
PSM
MENU
can also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
SOUND
You
for
good picture reproduction
at the
factory
and cannot be
TURBO/
PR ()
changed.
OK
VOL
Picture
You
can
ness
1.
2.
adjustment
SSM/
VOL
PR ()
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
123
456
789
Picture
PSM
Contrast
{
{
Brightness
{
Colour
{
Sharpness
{
0
100
LIST
()O}{O OKOMENU
Q.VIEW
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
I/II/
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
perform
can
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/* button to switch the eye function
MUTE
on or
off.
POWER
TV/AV
PSM
MENU
PICTURE
SSM/
Off
TURBO/
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
condition
Note
eye
display
display
changes.
but the
:
in
If you press the PSM
in green does not appear continuappears each time the picture
yellow
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
123
Turbo
picture
selection
(option)
456
When this function is on, the
789
tinct than normal
Repeatedly
picture
will be
more
brilliant and dis-
picture.
press the TURBO PICTURE button to switch
on or
off.
0
LIST
Q.VIEW
I/II/
(Turbo Picture off)
: If you press the PSM button with the Turbo picture
the Turbo picture function is automatically switched off.
Note
EYE/
16
(Turbo Picture on)
function,
Sound
adjustment (option)
Sound adjustment is an optional function only
adjustment can perform this function.
SSM
You
(Sound
set with sound
Memory)
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
can
Speech
1.
Status
a
Sound
SSM
{
AVL
{
DBS
{
Balance
{
()O}{O OKOMENU
Press the MENU button and then D / E button to select the
Sound
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting
on
the SSM
pull-down
sound set-
a
MUTE
menu.
POWER
Sound
SSM
{
Flat
AVL
{
Music
DBS
{
Movie
Balance
{
Speech
TV/AV
User
PSM
MENU
{
SSM/
SOUND
TURBO/
()O}OOKOMENU
Sound
Frequency Adjustment
PR ()
Press the G button in User to
a.
display
the User sub
menu.
OK
VOL
VOL
PR ()
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
0.1O0.5O1.5O5.0O10OkHz
(RF STEREO, Flat)
b. Select
Make
c.
a
456
(AV STEREO, Flat)
sound band
appropriate
by pressing
the F / G button.
789
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly
press the MENU button to return to normal TV
0
viewing.
You
can
also recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM/* button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
Note
:
123
()O}{OOKOMENU
LIST
Q.VIEW
I/II/
If you press the SSM/* button after making appropriate
on the User sub menu, the display User automatically
adjustment
appears
even
have already set a factory preset setting;
Speech.
though you
Flat, Music, Movie
or
17
Sound
adjustment (option)
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
You
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headvolume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
can
phone
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Press the G button.
1.
2.
3.
Sound
MENU
SSM
{
AVL
{
DBS
{
Balance
{
OOO0
SOUND
}{O OKOMENU
/
TURBO/
PR ()
OK
VOL
4.
Make desired adjustment with the F /
on each pull-down menu.
5.
6.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
G,
D / E or OK button
viewing.
VOL
PR ()
Turbo sound selection (option)
123
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
456
789
0
MEGA TURBO
(Turbo
Sound
off)
(Turbo
Sound
on)
Q.VIEW
Sound output selection (option)
I/II/
In AV
mode, you
can
speakers.
select
output sound for the left and right loud-
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
18
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Sound
Stereo/Dual
adjustment (option)
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Mono sound selection
In stereo reception if the stereo
mono
by pressing
of sound is
I/II/* button twice
depth
is
weak, you
the I/II/* button twice. In
improved.
again.
Language selection
If
signal
for dual
Display
mono
can
switch to
reception
the
To switch back to stereo, press the
language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* buta
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
I/II/
19
Time
Time
Setting the
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
T ime
()O}{OOKOMENU
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
{
()O}{OOKOMENU
MUTE
TV/AV
POWER
PSM
MENU
4.
5.
6.
viewing.
SSM/
SOUND
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Setting the
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
TURBO/
1.
PR ()
2.
OK
VOL
VOL
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
T ime
PR ()
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
Vol
123
456
789
0
30
On
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
LIST
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
.
Q.VIEW
I/II/
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto
sleep.
Press the G button and then D / E button to select On or Off
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
on
4.
5.
viewing.
20
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
Game
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV (AV1
or AV2), AV3 (option), S-VIDEO (option) or COMPONENT
(option) on the Input pull-down menu.
Special
Language
Input
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
{
COMPONENT
Game
MUTE
TV/AV
POWER
PSM
SSM/
TV
MENU
SOUND
()O}OOKOMENU
AV
or AV1 : VCR connected to the Euro scart socket or phone
of the set
AV2 : VCR connected to the AV2 sockets of the set (option)
AV3 : VCR connected to the AV3 sockets of the set (option)
S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart
socket on the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV viewing.
TURBO/
jack
4.
select the TV
Alternatively
you
In AV
to return to TV
can
or
AV mode
button.
mode,
mode, press the
by pressing
OK
VOL
VOL
PR ()
the TV/AV
123
D / E or NUMBER but-
tons.
Auto AV
PR ()
456
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV or AV1 mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
789
0
Child lock
LIST
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
Q.VIEW
button to select the
menu.
I/II/
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
With the lock on, the display Child lock on appears on the screen if
any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the
button on the front panel is pressed while displaying the
screen
if any
menus.
21
Other functions
Special
Blue back
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
Game
If you select On
appears
ground
Special
2.
3.
4.
5.
MUTE
MENU
SSM/
SOUND
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
button to select the
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
POWER
PSM
on
Press the MENU button and then D / E
1.
()O}{O OKOMENU
TV/AV
(option)
{
Note :
The blue background automatically appears on the screen when
there is no signal in AV mode.
b. In the Component mode, the blue background doesn't appear on
the screen.
a.
TURBO/
Tilt
(option)
PR ()
The TV
another
OK
VOL
VOL
PR ()
1.
picture may tilt to the left
position. This function can
Press the MENU button and then D / E
Special
2.
123
3.
4.
456
5.
right if the TV set moves to
be used to compensate the tilt.
or
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on the
Tilt pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
789
0
LIST
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
Q.VIEW
1.
Press the MENU button and then D / E
Special
I/II/
2.
3.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down
4.
Press the OK
5.
Repeatedly
viewing.
or
menu.
F button.
press the MENU button to return to normal TV
Note : If you cannot adjust the
it again after about 4 minutes.
22
button to select the
menu.
screen
condition
by degaussing, try
Other functions
Games
Game is
optional function, only a set with game
by using the remote control handset.
Press the MENU button and then D / E
Special
2.
3.
4.
Special
an
function
1.
(option)
can
perform
this
button to select the
menu.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
Game
()O}{O OKOMENU
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You
can
enjoy
the game
by using
the GAME owner's manual.
MUTE
Note :
a.
Press the TV/AV
or
MENU button to return to the normal TV
TV/AV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
Sleep
POWER
PSM
SSM/
TV
MENU
SOUND
TURBO/
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis-
PR ()
OK
VOL
VOL
PR ()
will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
-
-
-
of minutes selected.
Note :
To view the
a.
123
456
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
sleep time, repeatedly
display
appears.
-
-
press the SLEEP button
789
-
When you switch the set
off, the
set releases the
preset sleep
0
time.
LIST
Q.VIEW
SLEEP
I/II/
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
MUTE
POWER
Switch on/off
TV/AV
PSM
SSM/
TV
MENU
SOUND
TURBO/
PR ()
OK
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
SIMPLE text
PR ()
Page selection
1.
123
456
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
789
lowing
0
Programming
Press the
TEXT
Q.VIEW
M
a colour button in LIST mode
button to switch to LIST mode.
(option)
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
24
M
easily
LIST
I/II/
page.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
MUTE
TV/AV
POWER
PSM
MENU
SSM/
SOUND
i
TURBO/
FASTEXT
PR ()
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR ()
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
page.
123
456
789
0
LIST
Q.VIEW
I/II/
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
MUTE
POWER
Press this
TV/AV
PSM
MENU
SSM/
height text.
enlarge the top
button again to enlarge
Press this button to
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
SOUND
UPDATE
Displays the
TURBO/
TV
picture
the
on
screen
while
waiting
for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
PR ()
will change to the page number.
Press this button to view the updated teletext page.
display
PR ()
HOLD
the automatic page
Stops
123
456
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
789
MIX
0
MIX
UPDATE
SIZE
HOLD
LIST
TIME
Displays
To switch the TV
Note
REVEAL Q.VIEW
the teletext pages
superimposed
on
the TV
pic-
ture.
picture
off press this button
When TV and text
:
picture
are
again.
displayed half and half
of the screen, MIX function is not available.
?
I/II/
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
26
again
to exit this function.
RED/GREEN,
D
/ E
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
LL
PB
PR
DVD INPUT
COMPONENT
(480i)
OUT
AV
VIDEO
(L/MONO)AUDIO (R)
IN
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
Y
LL
PB
PR
DVD INPUT
(480)
COMPONENT
OUT
AV
VIDEO
(L/MONO)AUDIO (R)
IN
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
can
also record programmes received
out sockets.
by
the TV
on
VCR
R
AUDIO
L/MON
video
VIDEO
tape via audio/video
AV2
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
1.
2.
VCR
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV1) mode automatically. But if you want to keep on watching TV mode, press
the D / E or NUMBER buttons.
MENU OK
VOL
PR
LM NO
2
VCR
Otherwise press the TV/AV button on the remote control handset to select AV (or AV1). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
video
tape.
1
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
AV1
ANT IN
VCR
27
Connection of external
equipment
S-video / Audio in sockets
ANT IN
When connecting the S-video socket of the VCR to the S-VIDEO
socket of the set, the picture quality will be further improved.
OUT
75Ω
(S-AV) (option)
VIDEO
(L) -AUDIO (R)
-
IN
1.
VCR
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
2.
Connect the audio cable from the VCR to the AUDIO sockets of
3.
the set.
Select AV3
4.
Press the PLAY button
The VCR
ANT IN
75Ω
the TV/AV button
by pressing
on
playback picture
repeatedly.
the VCR.
appears
on
the
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
OUT
VIDEO
AUDIO
IN
Component
VCR
1.
in sockets
Connect the COMPONENT video
output sockets (Y Cb Cr, Y
Pb Pr
player
or
Y B-Y
INPUT sockets
ANT IN
Y
LL
PB
PR
DVD INPUT
COMPONENT
(480i)
R-Y) of the
(Y PB PR) on
VDEO
Connect the audio cable from the DVD
3.
4.
(LMONO) AUDIO (R)
Player
Headphone
AV2
VOL
PR
LMONO
2
28
can
on
the
screen.
(option)
headphone plug
a
headphone
socket
can
perform
headphone socket of the set.
through the headphones. To adjust
this
to the
listen to the sound
the
press the F / G button.
If you press the MUTE
switched off.
VIDEO
OK
socket
headphone volume,
L/MON
on the DVD player.
playback picture appears
models which have
function.
Insert the
You
to AUDIO IN
player
Press the PLAY button
The COMPONENT
Only
RAUDIO
to the COMPONENT
the set.
sockets of AV (or AV1).
Press the TV/AV button to select COMPONENT.
IN
DVD
DVD
2.
OUT
AV
(option)
button, the sound from the headphone's is
Note
Note
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF