LG | RT-21FA35R | LG RT-21FA35R Owner’s Manual

0474Aen-04/11/29
11/29/95
2:15
PM
Page
1
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0474A
(MC049B,
112V/124D/E
TX)
b
0474Aen-04/11/29
11/29/95
2:15
PM
Page
2
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
Calling the programme table
Setting up
10
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
16
Sound adjustment (option)
SSM (Sound Status Memory) / Sound adjustment
FM Transmitter (option) / Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
18
Time
21
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
22
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
25
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT /
26
Special
teletext functions
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
29
31
0474Aen-04/11/29
11/29/95
2:15
PM
3
Page
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
0474Aen-04/11/29
11/29/95
2:15
PM
Page
4
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
MUTE
1
11
1
2
2
3
4
5
6
7
8
9
0
TV/AV
1.
2.
3.
12
SOUND
MENU
PICTURE
10
4.
PR
VOL
5.
()
REW
PLAY
FF
P/STILL
STOP
REC
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
select
(only
a
EYE/* (option)
switches the eye function
on or
off.
I/II/
SSM/
PSM
SLEEP
PIP
FAVOURITE
LIST
EYE/
14
16
4
accepts your selection
programmes
OK
or
displays
the current mode.
Q.VIEW
6
TEXT/
6.
MIX
TIME
REVEAL
? MODE
SIZE
STILL
POSITION
9/4PIP
SWAP
Q.VIEW
returns to the
9
7
PR
() /
() (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
previously
viewed programme.
M
7.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
8.
PSM (Picture Status
recalls your preferred
9.
FAVOURITE
selects a favorite programme.
i
INPUT
Memory)
picture setting.
10. TURBO PICTURE / SOUND BUTTON
selects Turbo
picture
and sound.
11. MUTE
switches the sound
on or
off.
12. TV/AV
selects TV or AV mode.
switches the set on from
standby.
(option)
number.
TELETEXT
F / G
19
4
standby.
MENU (or INDEX)
selects a menu.
selects an index page in the teletext mode
scans
13
PR
standby
VOL
PR
8
15
from
on
OK
()
18
POWER
switches the set
models). (option)
3
TURBO/
5
handset, please install the bat-
0474Aen-04/11/29
11/29/95
2:15
PM
Page
5
Location and function of controls
13. I/II/*
(option)
selects the language during dual
selects the sound output.
language
broadcast.
(option)
POWER
14. LIST
displays
MUTE
1
the programme table.
11
1
2
3
4
5
6
7
8
9
MENU/INDEX
0
TV/AV
15. SLEEP
sets the
sleep
timer.
2
16. SSM/* (Sound Status Memory) (option)
recalls your preferred sound setting.
17. SURROUND (º/*) (option)
selects surround sound.
18. VCR BUTTONS
control
a
3
(option)
LG video cassette recorder.
4
13
I/II/
EYE/
19. PIP BUTTONS (option)
PIP
switches the sub picture
on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
* : No
12
TV
PR
VOL
5
()
VOL
OK
PR
()
Q.VIEW
LIST
14
6
PSM
SSM/
SLEEP
15
16
17
8
FAVOURITE
/
9
PICTURE
SOUND
TURBO/
10
function
COLOURED BUTTONS : These buttons
TELETEXT models) or programme edit.
are
used for teletext
(only
Battery installation
The remote control handset is powered by two AAA (or AA) type
batteries. To load the batteries, turn the remote control handset
over and open the battery compartment. Install two batteries as
indicated by the polarity symbols ( + and
) marked inside the com-
(Without
TELETEXT /
PIP)
-
partment.
LIST
Q.VIEW
TEXT/MIX/
or
SIZE/
HOLD/
TIME/
REVEAL/
7
UPDATE/
X
PSM
FAVOURITE
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
SSM/
PICTURE
TURBO/
(With
SLEEP/
?
M
SOUND
/
TELETEXT / Without
PIP)
5
0474Aen-04/11/29
11/29/95
2:15
PM
6
Page
Location and function of controls
Front
panel
RF/RT-21FB25 series
RF/RT-21FA35 series
AV2
ON/OFF
MENU
VOL
OK
PR
7
MENU
OK
VOL
PR
ON/OFF
L/MONO
2
R
AUDIO
6
123
RF/RT-17/21FB75 series
VIDEOL/MN
4
5
8
1345
2
RF/RT-15/21FB55/56 series
VIDEO
MENU
OK
VOL
67
L
A
R
PR
ON/OFF
AV
123
4
5
1
RF/RT-21FC45 series
234
6
5
8
7
RF/RT-21FB35 series
ON/OFF
7
MENU OK
VOL
PR
VIDEO
AV
VIDEO AUDIO
L/MONO AUDIO R
AV3
R
AUDIO
L/MON
6
1
245
RF/RT-15/21FB95 series
VIDEO
38
AV2
1234
5
RF/RT-21FB45 series
8
AV2
7
6
VIDEOL/MN
12345
8
AUDIO
R
CF/CT-15/21Q45 series
7
6
MENU
VIDEOL/MN
1
AUDIO
OK
VOL
ON/OFF
4
PR
VOL
5
8
23
R
AV2
RF/RT-15/21FE60/61 series
7
6
6
123
4
5
1234
5
6
7
6
7
0474Aen-04/11/29
11/29/95
2:15
PM
7
Page
Location and function of controls
Front
panel
RF/RT-17/21FB75 series
7
6
RAUDIO
L/MON
123
4
RF/RT-21FD35 series
VIDEO
OK
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
standby mode.
dims when the set is switched on.
3.
REMOTE CONTROL SENSOR
Note : Only use the supplied remote
control handset. (When you use others,
they'll be not able to function.)
4.
MENU
selects
5.
OK
5
AV2
MENU
1.
VOL
PR
AV2
6
12345
RF/RT-21FD15/40 series
VIDEOL/MN
MENU
OK
PR
VOL
AUDIO
accepts your selection
R
7
1234
RF/RT-15/21FB80 series
4
5
MENU
OK
the
displays
Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
5
PR
VOL
or
current mode.
F / G (Volume
selects a programme or a menu item.
switches the set on from standby.
AV2
6
a menu.
VIDEOAU
6.
AUDIO/VIDEO IN SOCKETS
(AV2)
(option)
Connect the audio/video out sockets of
external equipment to these sockets.
123
CF/CT-15/21Q95/96 series
7
MENU
VOL
ON/OFF
OK
L/MONAUDI
HEADPHONE SOCKET
Connect the headphone
socket.
8.
EYE (option)
adjusts picture according
rounding conditions.
TURBO
VIDEO
6
7.
SOUND
4
123
PR
PICTURE
512
8
R
CF/CT-21Q65/66 series
7
9.
AV2
TV/AV
(VOL)
()
PR
VIDEO
()
L/MONO
AUDIO
(option)
plug to this
R
to the sur-
TV/AV (option)
selects TV or AV mode.
ON/OFF
clears the menu from the screen.
switches the set on from standby.
AV2
12391011
67
8
10.
VIDEOL/MN
6
menus
AUDIO
R
7
AV2
(Function) (option)
selects volume, EYE (option), picture
items or brief auto programme while the
11.
RF/RT-21FC90/95 series
RF/RT-21FE90 series
not
display.
+/-(D/E)(option)
adjusts the function or
gramme.
switches the set
on
selects
from
4
switches Turbo sound
OK
5
function
PR
ON/OFF
1
3
PR
5
2
VOL
8
on or
or
pro-
standby.
12. TURBO SOUND / PICTURE
MENU
a
(option)
picture
Turbo
off.
Note :
a.
Do not place any heavy objects (over 4Kg)
on the RF/RT-21FA35 series models.
b. Shown is a simplified representation of
front or side panel. Here shown may be
somewhat different from your set.
7
0474Aen-04/11/29
11/29/95
2:15
PM
Page
8
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
POWER
fully.
3.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
4.
Press the main power button
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
programme number with the D / E
or
NUMBER
MENU
SOUND
Volume
OK
TURBO/
adjustment
Press the F / G button to
adjust
the volume.
()
PR
VOL
VOL
PR
Quick view
Press the Q.VIEW button to view the
()
were
previous programme
you
watching.
Mute function
Press the MUTE button. The sound is switched off and the
I/II/
display
W
appears.
You can cancel it
SSM /
by pressing
the
MUTE,
F
/
G, SSM/*, I/II/*,
TURBO SOUND button.
Q.VIEW
On
The
screen
menu
language
can
First select your
1.
selection
be
displayed
language.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
on screen
Press the OK
4.
8
Repeatedly
viewing.
or
displays
will appear in the selected
F button to select the
Special
language.
menu.
press the MENU button to return to normal TV
0474Aen-04/11/29
11/29/95
2:15
PM
Page
On
9
screen menus
The
an
dialogue between you and your set takes place on screen with
operator menu. The buttons required for the operating steps are
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
menu.
2.
3.
display
each
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
F/GorD/E.
You
to
can move
move
to the
higher
to the lower level
level
menu
or
pull-down
menu
with
with OK or F button and
press the G button.
POWER
MUTE
menu
Note :
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In mono models, the Sound menu does not appear.
d. In some models, Tilt, Degauss, Game, FM Transmitter or
Booster will not display.
e.
On some models, the Language will not display.
a.
1
2
3
4
5
6
7
8
9
0
TV/AV
Auto programme
Station
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
MENU
SOUND
TURBO
OK
()
PR
()O}{OOKOMENU
VOL
()O}{O OKOMENU
Station
menu
()
Manual programme
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
Storage
{
System
{
Channel
{
Search
{
Name
{
Booster
{
Picture
2
g
()O}{OOKOMENU
()O}{OOKOMENU
VOL
PR
I/II
SSM
menu
Programme
Sound
SSM
{
AVL
{
DBS
{
Balance
{
FM0Transmitter
{
edit
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
Q.VIEW
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
0474Aen-04/11/29
11/29/95
2:15
PM
Page
10
TV stations
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
models up to 200 TV stations
some
Auto programme
()O}{O OKOMENU
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
POWER
can
MUTE
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU
TURBO
OK
()
PR
VOL
VOL
PR
5.
6.
7.
()
8.
9.
{
I
{
DK
TurboOsearch
{
M
BG
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
I/II
{
NormalOsearch
()O}{OOKOMENU
4.
SOUND
System
StorageOfrom
SSM
Q.VIEW
In
some
models, you
can
only
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
0474Aen-04/11/29
11/29/95
2:15
PM
Page
11
Setting up
TV stations
Auto programme scan
To automatically scan the pictures of stored programmes, press
theD( DD ) or E( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
E
To
stop
auto programme
scanning,
Manual programme
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
press any button except VCR buttons.
tuning
()O}{OOKOMENU
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
programme.
3.
Press the G button to
display
the Manual programme
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
POWER
MUTE
menu.
1
2
3
4
5
6
7
8
9
0
TV/AV
2
{
()O}{OOKOMENU
MENU
SOUND
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
TURBO
OK
()
PR
VOL
VOL
PR
()
I/II
SSM
Q.VIEW
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
0474Aen-04/11/29
11/29/95
2:15
PM
Page
12
TV stations
Setting up
AutoOprogramme
ManualOprogramme
{
{
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
ProgrammeOedit
FavouriteOprogramme
{
2.
Station
{
3.
Press the D / E button to select Name.
Press the G button on the Name pull-down
4.
Press the D button. You
and the
()O}{O OKOMENU
5.
6.
your choice of the second
Press the OK button.
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU
SOUND
Repeatedly
viewing.
can
(option)
models, Booster is
can
menu.
+, -, the numeric 0 to 9
opposite
direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
In
Booster
select in the
pressing
Booster
some
blank,
A to Z.
With the E button you
Select the position by
7.
POWER
alphabet
can use a
1 to 3.
perform
an
optional
function.
Only
a
set with
this function.
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
TURBO
OK
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
1
()
PR
VOL
VOL
PR
4.
()
Repeat
Press the D / E button to select On
down
I/II
SSM
Q.VIEW
12
or
Off
on
the Booster
pull-
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
press the MENU button to return to normal TV
0474Aen-04/11/29
11/29/95
2:15
PM
Page
13
TV stations
Setting up
Programme
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert
a
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
2.
Station menu.
Press the G
()O}{OOKOMENU
button
and
then
D
/
E
button
select
to
Programme edit.
3.
Press the G button to
display
Programme
the
Programme edit
menu.
edit
OOOOCO01 OOO5OOSO69
POWER
O1OOCO03OOO6OOSO17
MUTE
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
1
2
3
4
5
6
7
8
9
0
TV/AV
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
a
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
TURBO
a
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
or F / G button.
2.
3.
OK
()
PR
VOL
one
position.
VOL
PR
()
Moving
1.
MENU
SOUND
a programme
Select a programme to be moved with the D / E
Press the YELLOW button.
or
F / G button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
again
to release this function.
I/II
SSM
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
Q.VIEW
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Skipping
a
Select
a
1.
programme number
programme number to be
skipped with
the D / E
or
F / G
button.
2.
3.
Press the BLUE button. The
skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV
viewing.
directly
enter the programme number with the NUMBER but-
tons
select it in the programme edit
or
Repeatedly
If you want to select the
or
skipped programme,
table
menu.
press the MENU button to return to normal TV
viewing.
13
0474Aen-04/11/29
11/29/95
2:15
PM
Page
14
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
TV stations
Favourite programme
{
{
This function lets you select your favorite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
()O}{OOKOMENU
menu.
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
()
56n Ca 05
{
Press the D / E button to select
5.
desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
6.
OK
{
{
4.
Select
--
-----.
a
You
7.
TURBO
{
ProgrammeOedit
FavouriteOprogramme
}{O0_9O()OOKOMENU
MENU
SOUND
AutoOprogramme
ManualOprogramme
8.
can store up to 8 programmes.
Press the OK button.
Repeatedly
viewing.
press the MENU button to return to normal TV
PR
VOL
VOL
PR
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
TEXT/
PR
14
Repeatedly
press the FAVOURITE button to select stored favourite
programmes.
()
LIST
Q.VIEW
0474Aen-04/11/29
11/29/95
2:15
PM
Page
15
Setting up
TV stations
Calling the programme table
You can check the programmes stored in the memory
the programme table.
programme table
Press the LIST button to display the
by displaying
Displaying
Programme
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
POWER
MUTE
Station
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
1
2
3
4
5
6
7
8
9
0
TV/AV
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENUOO
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
TURBO
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
Select
a
OK
()
PR
VOL
VOL
PR
programme in the programme table
programme with the D / E or F / G button.
Selecting
MENU
SOUND
a
()
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST button to return to normal TV
viewing.
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
Q.VIEW
TEXT/
PR
15
0474Aen-04/11/29
11/29/95
2:15
PM
Page
16
Picture
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
adjustment
PSM (Picture Status
Memory)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button to select PSM.
Press the G button and then D / E button to select
3.
()O}{O OKOMENU
setting
on
the PSM
pull-down
a
picture
menu.
Picture
POWER
1
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
MUTE
2
5
6
7
8
9
0
TV/AV
MENU
SOUND
()O}OOKOMENU
3
4
4.
Press the OK
5.
Repeatedly
viewing.
()
can also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
good picture reproduction
Picture
VOL
You
PR
()
2.
I/II
SSM
SLEEP
FAVOURITE
can
ness
1.
PSM
F button.
press the MENU button to return to normal TV
at the
factory
and cannot be
changed.
OK
PR
VOL
or
You
for
TURBO
PIP
PSM
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
LIST
Picture
EYE/
Q.VIEW
PSM
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
TEXT/
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
on the each sub menu.
appropriate
adjustments
PR
Contrast
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
16
0474Aen-04/11/29
11/29/95
2:15
PM
Page
17
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/* button to switch the eye function
on or
POWER
off.
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
PICTURE
MENU
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
display
display
changes.
but the
condition
in
in green does not appear continuappears each time the picture
SOUND
()
PR
VOL
:
Turbo
picture
selection
When this function is on, the
tinct than normal picture.
Repeatedly
VOL
PR
If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
OK
TURBO/
yellow
()
(option)
picture
will be
more
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
brilliant and dis-
press the TURBO PICTURE button to switch
on or
off.
EYE/
Q.VIEW
TEXT/
REVEAL
PR
(Turbo Picture off)
(Turbo Picture on)
: If you press the PSM button with the Turbo picture
the Turbo picture function is automatically switched off.
Note
function,
17
0474Aen-04/11/29
11/29/95
2:15
PM
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
FMOTransmitter
{
18
Page
adjustment (option)
Sound adjustment is an optional function only
adjustment can perform this function.
SSM
You
1.
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
can
Press the MENU button and then D / E button to select the
Sound
2.
POWER
MUTE
3.
set with sound
(Sound Status Memory)
Speech
()O}{OOKOMENU
a
menu.
Press the G button to select SSM.
Press the G button and then D / E button to select
on the SSM pull-down menu.
sound set-
a
ting
1
2
3
4
5
6
7
8
9
0
TV/AV
Sound
SSM
{
Flat
AVL
{
DBS
{
Music
Movie
Balance
{
Speech
FMOTransmitter
{
User
{
()O}OOKOMENU
MENU
SOUND
Sound
Press the G button in User to
a.
TURBO
Frequency Adjustment
OK
display
the User sub
menu.
()
PR
VOL
VOL
PR
()
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
(RF STEREO, Flat)
b. Select
I/II
SSM/
PSM
SLEEP
PIP
FAVOURITE
LIST
a
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
EYE/
Q.VIEW
Make
c.
(AV STEREO, Flat)
Repeatedly
press the MENU button to return to normal TV
viewing.
TEXT/
You
can
also recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM/* button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
PR
Note
:
If you press the SSM/* button after making appropriate
on the User sub menu, the display User automatically
adjustment
appears
even
18
have already set a factory preset setting;
Speech.
though you
Flat, Music, Movie
or
0474Aen-04/11/29
11/29/95
2:15
PM
Sound
Sound
You
19
Page
adjustment (option)
Sound
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headvolume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
can
phone
1.
2.
3.
4.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Press the G button.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
SSM
{
AVL
{
DBS
{
Balance
{
FMOTransmitter
{
()O}{O OKOMENU
POWER
MUTE
Sound
SSM
{
AVL
{
DBS
{
Balance
{
FMOTransmitter
{
OOO0
1
2
3
4
5
6
7
8
9
0
TV/AV
}{OOKOMENU
5.
6.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
FM Transmitter
You
can
MENU
SOUND
viewing.
OK
TURBO/
(option)
also listen to the sound
through
()
the FM receiver.
PR
VOL
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select FM
Transmitter.
Press the G button and then D / E button to tune in a frequency
on the FM Transmitter pull-down menu.
VOL
PR
()
Sound
SSM
{
87.7OMHz
AVL
{
DBS
{
Balance
{
FMOTransmitter
{
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
EYE/
Q.VIEW
TEXT/
}{OOKOMENU
4.
Match the TV's
frequency
Turbo sound selection
and the FM receiver's.
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
PR
MEGA TURBO
(Turbo
Sound
off)
(Turbo
Sound
on)
19
0474Aen-04/11/29
11/29/95
2:15
PM
Page
Sound
20
adjustment (option)
Sound output selection (option)
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/* button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
I/II/
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
0474Aen-04/11/29
11/29/95
2:15
PM
Page
21
Time
Setting the
1.
2.
3.
Setting
Time
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
()O}{O OKOMENU
{
()O}{OOKOMENU
4.
5.
6.
POWER
button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
1
2
3
4
5
6
7
8
9
0
TV/AV
function.
1.
2.
3.
MUTE
Press the G
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
MENU
SOUND
TURBO
OK
()
Time
PR
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
VOL
Vol
VOL
PR
()
30
On
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
EYE/
Q.VIEW
TEXT/
.
Auto
PR
sleep
If you select On on the Auto sleep pull-down menu, the set will
switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
automatically
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
21
0474Aen-04/11/29
11/29/95
2:15
PM
22
Page
Other functions
TV and AV modes
Special
{
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
Game
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
()O}{O OKOMENU
2.
3.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select
Press the G button and then D / E button to select
AV2), AV3 (option), S-VIDEO (option)
(option) on the Input pull-down menu.
or
POWER
1
3
4
5
6
7
8
9
0
TV/AV
TURBO
AV
()
VOL
()
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
{
COMPONENT
AV1 : VCR connected to the Euro scart socket or phone
of the set
AV2 : VCR connected to the AV2 sockets of the set (option)
AV3 : VCR connected to the AV3 sockets of the set (option)
S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart
socket on the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV viewing.
or
jack
OK
PR
COMPONENT
()O}OOKOMENU
PR
VOL
Language
Input
Game
MENU
SOUND
Input.
TV, AV (AV1
Special
MUTE
2
or
4.
select the TV
Alternatively
you
In AV
to return to TV
can
or
AV mode
button.
mode,
mode, press the
by pressing the
TV/AV
D / E or NUMBER but-
tons.
Auto AV
I/II
SSM
Q.VIEW
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV or AV1 mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
5.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen if
any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the
button on the front panel is pressed while displaying the
22
screen
menus.
if any
0474Aen-04/11/29
11/29/95
2:15
PM
Page
23
Other functions
Blue back
If you select On
appears
ground
Special
3.
4.
5.
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
2.
Special
(option)
o
o
button to select the
menu.
OOO
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note :
a. The blue background automatically appears on the screen when
there is no signal in AV mode.
b. In the Twin picture mode, PIP, Component mode, the blue background doesn't appear on the screen.
Tilt
(option)
The TV
another
1.
3.
4.
5.
or
right
if the TV set
be used to
Press the MENU button and then D / E
Special
2.
MENU
picture may tilt to the left
position. This function can
moves
to
compensate the tilt.
OK
()
button to select the
PR
VOL
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on the
Tilt pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
VOL
PR
()
viewing.
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
button to select the
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down
4.
Press the OK
5.
Repeatedly
viewing.
or
menu.
F button.
press the MENU button to return to normal TV
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
23
0474Aen-04/11/29
11/29/95
2:15
PM
24
Page
Other functions
Games
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
Game
Game is
function
1.
optional function, only a set with game
by using the remote control handset.
Press the MENU button and then D / E
Special
()O}{OOKOMENU
2.
3.
4.
MUTE
2
3
4
5
6
7
8
9
0
TV/AV
can
perform
this
button to select the
menu.
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You can
POWER
1
(option)
an
enjoy
the game
Note :
Press the TV/AV
a.
or
by using
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
the game.
Sleep
a new
game, press the RED button to start
during
timer
MENU
SOUND
TURBO
OK
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
()
VOL
preset time elapses.
Press the SLEEP button to select the number of minutes. The dis-
PR
VOL
PR
()
will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
-
-
-
of minutes selected.
Note :
To view the
a.
remaining sleep time,
press the SLEEP button
once.
I/II
b.
SSM
To cancel the
until the
SLEEP
c.
Q.VIEW
24
sleep time, repeatedly
display
appears.
-
-
When you switch the set
time.
press the SLEEP button
-
off, the
set releases the
preset sleep
0474Aen-04/11/29
11/29/95
2:15
PM
Page
PIP
Option
PIP is
25
operation (option)
:
an
optional function,
that
so
only
the set with PIP function
operate.
can
PIP (Picture in Picture) displays a picture within a
PIP function is not available in Component mode.
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
mode selection for sub
Input
pictures.
picture
Press the INPUT button to select the
mode for the sub
input
pic-
ture.
Each time this button is pressed, each input mode for the sub picdisplayed as shown below at the right upper side of main
ture is
picture.
Programme
COMPONENT
Swapping
number
AV
(option)
Note : When the main
available.
Programme
exchange
picture
is TV
(option)
pictures
the main and sub
or
selection for sub
(option)
AV 3
(option)
between main and sub
Press the SWAP button to
AV 2
AV1
or
S-VIDEO
AV
pictures.
modes, the swapping is
picture
Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
: When the sub picture
quality might get poor.
Note
ture
picture
1/9 size
picture
PIP
1/2 size
size is 1/2 of the main
picture,
the
pic-
SIZE
PR
Sub
picture
or
SWAP
9/4PIP
INPUT
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
9
PR
POSITION
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
STILL
4 sub
position
is
picture
Press the 9/4 PIP button
repeatedly
to select 9
or
4 sub
pictures.
25
0474Aen-04/11/29
11/29/95
2:15
PM
Page
26
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TV/AV
Switch on/off
OK
()
PR
Press the TEXT or TEXT/* button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT or TEXT/* button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT (or TEXT/*) or TV/AV button to switch off teletext.
The previous mode reappears.
PR
()
SIMPLE text
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
page.
a colour button in LIST mode
button to switch to LIST mode.
Programming
TEXT/
Press the
M
(option)
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
26
0474Aen-04/11/29
11/29/95
2:15
PM
Page
27
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
2
3
4
5
6
7
8
9
0
TOP mode.
FASTEXT
()
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
PR
()
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
page.
i
27
0474Aen-04/11/29
11/29/95
2:15
PM
Page
28
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
1
2
3
4
5
6
Selects double
Press this
7
8
9
0
height text.
enlarge the top
button again to enlarge
Press this button to
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays the
TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
()
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
()
HOLD
the automatic page
Stops
text page consists of 2
change
which will
if
occur
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
?
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
picture
off press this button
When TV and text
:
picture
are
again.
displayed half and half
of the screen, MIX function is not available.
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
28
again
to exit this function.
RED/GREEN,
D
/ E
or
0474Aen-04/11/29
11/29/95
2:15
PM
Page
29
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
LL
Y
PB
PR
DVD INPUT
COMPONENT
(480i)
OUT
AV
VIDEO
(L/MONO)AUDIO (R)
IN
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
Y
LL
PB
PR
DVD INPUT
COMPONENT
(480)
OUT
AV
VIDEO
(L/MONO)AUDIO (R)
IN
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
via audio/video out sockets.
can
tape
by
the TV
on
VCR
R
AUDIO
L/MON
video
VIDEO
AV2
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
1.
2.
VCR
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV1) mode automatically. But if you want to keep on watching TV mode, press
the D / E or NUMBER buttons.
MENU OK
VOL
PR
LM NO
2
VCR
Otherwise press the TV/AV button on the remote control handset to select AV (or AV1). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
video
tape.
1
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
AV1
ANT IN
VCR
29
0474Aen-04/11/29
11/29/95
2:15
PM
30
Page
Connection of external
equipment
S-video / Audio in sockets
When
OUT
75Ω
connecting
the S-video socket of the VCR to the S-VIDEO
socket of the set, the
ANT IN
VIDEO
(S-AV) (option)
picture quality
will be further
improved.
(L) -AUDIO (R)
-
IN
1.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
VCR
ANT IN
75Ω
2.
Connect the audio cable from the VCR to the AUDIO sockets of
the set.
3.
Select AV3
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
the TV/AV button
by pressing
repeatedly.
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
OUT
VIDEO
AUDIO
IN
Component
VCR
1.
in sockets
Connect the COMPONENT video
Pb Pr or Y B-Y R-Y) of the DVD
INPUT sockets
ANT IN
LL
Y
PB
PR
DVD INPUT
VDEO
COMPONENT
(480i)
PR)
on
to the COMPONENT
the set.
3.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD player.
4.
(LMONO) AUDIO (R)
Player
PB
Connect the audio cable from the DVD
sockets of AV (or AV1).
The COMPONENT
IN
DVD
(Y
output sockets (Y Cb Cr, Y
player
2.
OUT
AV
(option)
Headphone
Only
playback picture
socket
to AUDIO IN
player
appears
on
the
screen.
(option)
models which have
a
headphone
socket
can
perform
this
function.
Insert the
You
L/MON
AV2
PR
LMONO
2
30
to the
headphone socket of the set.
through the headphones. To adjust
the
press the F / G button.
If you press the MUTE
switched off.
VIDEO
VOL
headphone plug
listen to the sound
headphone volume,
RAUDIO
OK
can
button, the sound from the headphone's is
0474Aen-04/11/29
11/29/95
2:15
PM
Page
31
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
0474Aen-04/11/29
11/29/95
2:15
PM
Page
32
Download PDF

advertising