LG | RT-29FC90RB | LG RT-29FC90RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
Contents
Installation
3
Location and function of controls
Remote control handset / Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
9
Setting
Picture adjustment
PSM (Picture Status Memory) / DRP (Digital Reality
XD / Picture adjustment / Eye (option)
Turbo picture selection (option) / Picture format
14
Picture)
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
FM (Frequency Modulation) Transmitter
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
18
Time
22
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option)
Tilt / Degaussing (option) / Sleep timer
23
PIP
operation (option)
25
FM Radio setting
On and off / Volume
26
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
27
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
adjustment
Auto tuning / Manual tuning
Connection of PC
RGB PC mode
(option)
(option) /
30
PC in socket
(option)
Connection of external equipment
Aerial socket / Audio/Video in/out sockets (option)
Euro scart sockets (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets (option)
DTV in sockets (option) / Monitor out sockets
RF out sockets
Headphone socket
Troubleshooting
2
check list
31
35
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
You
can
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
install the set to the rack.
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use it, please select TV, VCR
the TV, VCR or DVD buttons.
or
DVD function
by
press-
ing
1.
2.
1
3.
2
3
4.
1
2
3
4
5
6
7
8
90
TUNE, P.SET
POWER
switches the set
on
from
NUMBER BUTTONS
switch the set on from
MUTE
switches the sound
VOL
standby
standby
on or
or
6.
MENU
selects
7.
OK
Adjusts
Selects
7
or
off to
directly
standby.
select
a
number.
menu
menu
or
displays
the current mode.
settings.
item.
8.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PIP PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
PIP INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode through 12 sub
9.
SSM (Sound Status Memory)
recalls your preferred sound setting.
8
9
10
11
12
13
14
i
M
pictures.
10. PSM (Picture Status
recalls your preferred
Memory)
picture setting.
11. MAIN STILL
freezes motion of the
picture.
12. INDEX (option)
switches LED DISPLAY
on or
off.
13. LIST
displays
the programme table.
14. FAVOURITE
selects a favourite programme.
4
FM mode.
a menu.
accepts your selection
D/EorF/G
MENU
on
off.
VOL +/- (Volume Up/Down)
Increases/decreases sound level.
PR +/- (Programme Up/Down)
selects a programme.
6
?
or
5.
4
5
FM MENU
selects a CH,
Location and function of controls
15. LCD
DISPLAY
(Liquid Crystal Diode)
16. TUNE/VOL
adjusts FM radio menu item.
adjusts FM radio volume.
17. FM ON/OFF
switches the FM radio
18.
TV, VCR,
selects
a
on or
off.
DVD BUTTONS
LG TV, VCR or DVD function.
15
19. TURBO PICTURE BUTTON
selects Turbo picture.
TURBO SOUND BUTTON
selects Turbo sound.
20. SLEEP
sets the
sleep
16
17
18
timer.
21. TV/AV
selects TV or AV mode.
switches the set on from
3
45
6
78
90
19
standby.
22. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
23. I/II
selects the language during dual language broadcast.
selects the sound output (option).
24. ARC
12
20
MENU
21
Ratio
Control)
(Aspect
changes the picture format.
25. Q.VIEW
returns to the
previously
viewed programme.
26. EYE/* (option)
switches the eye function
on or
22
off.
27. EARPHONE SOCKET / EARPHONE
connects the earphone (supplied) to this socket to listen the FM
sound.
In teletext mode, the PIP PR
tons are used for teletext function.
Note
:
Battery
23
24
25
+/-, SWAP and PIP INPUT but-
26
installation
The remote control handset is powered by two AA/Alkaline type
batteries. To load the batteries, turn the remote control handset
over and open the battery compartment. Install two batteries as
indicated by the polarity symbols ( + and
) marked inside the com-
i
?
M
partment.
27
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
RT-29FC90 series
8
S-VIDEOL/MN
9
MENU
3
AUDIO
R
10
7
OK
AV4
2
PR
ON/OFF
PCINPUT
1
6
PR
Side
VOL
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
OK
accepts your selection
or
displays
the current
mode.
3.
4.
MENU
selects
a menu.
F / G
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
5.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
dims when the set is switched on.
6.
REMOTE CONTROL SENSOR
7.
EYE (option)
adjusts picture according
conditions.
6
4
5
panel
to the
standby
surrounding
8.
HEADPHONE SOCKET
Connect the headphone plug to this socket.
9.
AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in AV4.
10. PC INPUT SOCKET (option)
Connect the monitor output socket of the
PERSONAL COMPUTER to this socket.
Note : Set the resolution of PC to VGA
640x480 (60 Hz) video mode to use this set
as PC monitor.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, PR +/-, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the PR +/-
or
NUMBER
adjustment
Press the VOL +/- button to
adjust
12
3
45
6
78
90
the volume.
Quick view
Press the Q.VIEW button to view the last programme you
were
watching.
Mute function
MENU
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the MUTE, VOL +/-,
SSM, I/II,
TURBO SOUND button.
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the side panel control for about 10 seconds. To stop auto
demonstration, press any button of the set and POWER button of
the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
on
the
(option)
screen
in desired
language.
i
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
screen menus
The
an
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
menu.
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
4.
Change
menu.
the
setting
of
an
item in the sub
or
pull-down
menu
with
F/GorD/E.
You
to
to the higher level menu with OK or F button and
to the lower level menu press the G button.
can move
move
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
On some models, the Super woofer, Language will not dis-
play.
1
4
7
2
5
8
3
Station
6
Auto programme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
M
{
2
{
TurboOsearch
90
()O}{O OKOMENU
()O}{O OKOMENU
Station
menu
Manual programme
Picture
MENU
PSM
{
DRP
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
()O}{O OKOMENU
Picture
menu
Programme
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
FMOTransmitter
{
{
edit
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
i
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
T ime
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
{
()O}{OOKOMENU
Special
TV programme
8
BG
AutoOprogramme
ManualOprogramme
menu
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
can
2.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
Station
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
System
StorageOfrom
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
{
BG
()O}{OOKOMENU
4.
Press the G button. Select a TV system with the D / E button
the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
on
5.
6.
7.
8.
9.
Option:
In
some
models, you
can
only
12
3
45
6
78
90
MENU
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
i
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
()O}{OOKOMENU
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
4.
5.
1
2
3
4
5
6
7
8
90
6.
7.
8.
MENU
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the F button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
i
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
7.
Station
1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1
Repeat
2.
Press
Press
Press
down
Press
3.
4.
5.
6.
the 'Manual programme tuning' steps 1 to 3.
the D / E button to select Booster.
the G button.
the D / E button to select On or Off on the Booster
pull-
menu.
the OK button.
the MENU button to return to normal TV
12
3
45
6
78
90
Repeatedly press
viewing.
Fine
tuning
MENU
Normally
1
2.
3.
4.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Repeat
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
O}{OOKOMENU
5.
6.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
be indicated
by yellow
i
number
11
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()O}{OOKOMENU
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme edit
O0OOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
1
2
3
4
5
6
Copying
1.
7
8
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
90
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
MENU
3.
or F
one
/ G button.
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
Programme edit
O0OOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
i
2.
3.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
Setting up
TV stations
Favourite programme
Station
This function lets you select your favorite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
programme.
3.
Press the G button to
display
the Favourite programme
menu.
()O}{OOKOMENU
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
O56C05
{
{
}{O0_9O()OOKOMENU
4.
5.
6.
7.
8.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly press the FAVOURITE button to select stored favourite
programmes.
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
12
3
45
6
78
90
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
MENU
Station
O0OOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
i
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
a
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV viewing.
There
13
Picture
Picture
PSM
PSM
DRP
XD
Contrast
{
Brightness
{
Colour
{
Sharpness
{
adjustment
(Picture Status Memory)
{
{
{
1.
2.
3.
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
PSM
DRP
XD
Contrast
{
Dynamic
{
Standard
{
Mild
{
Game
Brightness
{
Colour
User
{
Sharpness
{
()O}OOKOMENU
Press the OK
5.
Repeatedly press
viewing.
You
2
3
4
5
6
7
8
90
button.
the MENU button to return to normal TV
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
also recall
Mild, Game
1
or F
4.
DRP
1.
2.
MENU
3.
or
(Digital Reality Picture)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select DRP.
Press the G button and then D / E button to select Pro or 100
on the DRP pull-down menu.
Picture
PSM
DRP
XD
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
0Pro
{
0100
{
()O}OOKOMENU
4.
5.
Press the OK
or F
button.
Repeatedly press the MENU
viewing.
Note : DRP is always set to Pro in
dow mode or multi-picture mode.
i
14
button to return to normal TV
case
of NTSC
input,
double win-
Picture
adjustment
Picture
XD
You
the vivid and hi-definition
enjoy
Digital Reality processor technology.
1.
2.
3.
can
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select XD.
Press the G button and then D / E button to select On or Off
on the XD pull-down menu.
Press the OK
5.
Repeatedly press
Picture
can
ness
1.
2.
button.
the MENU button to return to normal TV
Brightness
{
Colour
{
Sharpness
{
{
{
{
()O}{OOKOMENU
viewing.
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
PSM
{
DRP
{
XD
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
12
3
45
6
78
90
100
()O}{OOKOMENU
3.
{
or F
4.
You
picture
with LG's excellent
PSM
DRP
XD
Contrast
MENU
Press the G button and then F / G button to make
on the each sub menu.
appropriate
adjustments
Contrast
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
i
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
some
ing
models, the set will automatically adjust the picture accord-
to the
surrounding conditions. This will enable you
picture according to the surroundings.
to
enjoy
the
most suitable
Press the EYE/* button to switch the eye function
on or
off.
Off
12
3
45
6
78
90
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
display
display
changes.
but the
condition
in
in green does not appear continueach time the picture
yellow appears
: If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
MENU
Turbo
picture
selection
When this function is on, the
tinct than normal picture.
Repeatedly press
picture
will be
more
brilliant and dis-
the TURBO PICTURE button to switch
(Turbo Picture off)
i
(option)
on or
off.
(Turbo Picture on)
: If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
Note
16
Picture
adjustment
Picture format
You
watch TV in various
can
picture formats; 4:3,
16:9
(Wide)
or
Zoom.
In
some
models, you
can
watch TV in various
(Wide), 14:9, Zoom or Auto.
Repeatedly press the ARC button to
picture formats; 4:3,
16:9
select your desired
picture format.
4:3
This
picture
format is 4 to 3 of
general
TV.
16:9
You
can
enjoy the cinema (the picture
through the 16:9 mode.
format of
16:9)
or
general
TV
programme
14:9 (option)
You can enjoy the
through
screen
move
picture
format of 14:9
the 14:9 mode. The
4:3 is
the
magnified
screen
up
or
screen
or
general
TV programme
14:9 is viewed
to the upper / lower and
down with D / E button.
just like that the
left / right. You can
Zoom
You
can
The
screen
so
enjoy
that the
the cinema in
4:3 is
a
magnified
16:9 is full.
screen
through the Zoom mode.
upper/lower and left/right sides
The bottom and top of the picture
vast screen
to the
may be lost. In some models, you
with D / E button.
Auto (option)
When your TV receives the wide
cally changed
Note
a.
b.
to the
picture
can move
screen
the
signal,
screen
up
or
down
it will be automati-
format to be sent.
:
In the PC and 2/12 PIP modes, ARC function isn't available.
In some models, ARC function isn't available in Component,
576P modes.
17
Sound
SSM
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
FMOTransmitter
{
()O}{OOKOMENU
You
adjustment
(Sound Status Memory)
select your
can
preferred sound setting; Dolby Virtual, Flat,
Speech and you can also adjust the sound freequalizer.
Music, Movie
quency of
1.
or
Press the MENU button and then D / E button to select the
Sound
menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound set-
2.
3.
ting
on
the SSM
pull-down
menu.
Sound
SSM
{
DolbyOVirtual
AVL
{
Flat
DBS
{
Balance
{
Music
Movie
{
Speech
{
User
§Volume
FMOTransmitter
{
()O}OOKOMENU
1
2
3
4
5
6
Dolby Virtual
Dolby Virtual lets you experience panoramic
Sound
7
8
Frequency Adjustment
Press the G button in User to
a.
effects of sound.
display
the User sub
menu.
90
0.1O0.5O1.5O5.0O10OkHz
MENU
()O}{OOKOMENU
b. Select
a
sound band
by pressing
the F / G button.
Make
appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
c.
Repeatedly press
You
the MENU button to return to normal TV
also recall
can
Movie, Speech
desired sound
a
or
User)
viewing.
(Dolby Virtual, Flat, Music,
with SSM button
on
the remote control.
The sound
Dolby Virtual, Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory and cannot
be
i
changed.
Note
:
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
ment on
appears
Dolby
18
even
though you
have
already set a factory preset setting;
or Speech.
Virtual, Flat, Music, Movie
Sound
Sound
adjustment
You
adjust balance,
adjustment
Sound
AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
1.
2.
can
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS ,Balance, Super woofer (option) or
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
FMOTransmitter
{
{
()O}{OOKOMENU
§Volume.
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
0
{
FMOTransmitter
{
}{OOKOMENU
3.
Make desired adjustment with the F / G, D / E or OK button
each pull-down menu.
Repeatedly press the MENU button to return to normal TV
on
4.
viewing.
Note
FM
:
In
Dolby
Virtual
mode, AVL
(Frequency Modulation)
You can listen to the FM sound
with the earphone.
1.
2.
or
DBS is not available.
Transmitter
through
12
3
45
6
78
90
the remote control handset
Insert the earphone to the earphone socket of the remote control handset.
To listen the FM sound from the earphone, tune in a frequency
on the FM Transmitter pull-down menu.
MENU
Sound
SSM
{
87.7OMHz
AVL
{
DBS
{
Balance
{
§Volume
FMOTransmitter
{
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
{
()O}OOKOMENU
3.
4.
Press the FM ON/OFF button for a while.
Repeatedly press the FM MENU button to select the TUNE
menu of the remote control handset.
i
5.
Press the TUNE/VOL button to match the TV's frequency and
the remote control handset's.
To adjust the earphone volume, press the TUNE/VOL button on
the VOL menu of the remote control handset.
19
Sound
adjustment
Turbo sound selection
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
FMOTransmitter
{
{
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
()O}{OOKOMENU
(Turbo Sound off)
(Turbo Sound on)
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
1
2
3
4
5
6
7
8
90
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right
loud-speakers.
L+R
MENU
i
20
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
Language
If
selection for dual
language
broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II buta
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
21
Time
Time
Setting
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Setting
the clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust the hour.
Time
()O}{OOKOMENU
Clock
{
Offotime
Onotime
{
AutoOsleep
{
-i-o:o-i-
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting
the On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
1
2
3
1.
4
5
6
2.
7
8
90
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
Time
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
MENU
Vol.30
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset and
the On/Off time is off.
Auto
i
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
22
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
PCoSetup
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2,
AV3, AV4, COMPONENT1 or COMPONENT2 or RGB PC
(option) on the Input pull-down menu.
Special
Language
Input
{
TV
{
AV1
Childolock
{
AV2
Blueoback
{
AV3
Tilt
{
AV4
Degauss
{
{
COMPONENT1
PCoSetup
COMPONENT2
RGBoPC
()O}OOKOMENU
4.
AV1 : VCR connected to the Euro scart socket or AV1 sockets on
the set.
AV2 : : VCR connected to the Euro scart socket or AV2 sockets
on the set.
AV3 : VCR connected to the AV3 sockets on the set.
AV4 : VCR connected to the AV4 sockets on the set.
COMPONENT 1/2 : DVD or SET-TOP Box connected to the
COMPONENT 1/2 sockets on the set
RGB PC : PERSONAL COMPUTER connected to the PC INPUT
socket on the set (option)
Repeatedly press the MENU button to return to normal TV view-
ing.
Alternatively you
can
select the TV
or
AV mode
button.
In AV
mode,
to return to TV
by pressing
mode, press the PR
+/-
or
the TV/AV
12
3
45
6
78
90
MENU
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV2 mode when an AV signal is input. But if you
want to keep on watching TV mode, press the PR +/- or NUMBER
buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV view-
i
ing.
With the lock on, the display Child lock on appears on the screen if
any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the
button on the front panel is pressed while displaying the
screen
if any
menus.
23
Other functions
Special
Blue back
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
PCoSetup
{
{
on
ground appears
on
1.
2.
3.
()O}{OOKOMENU
(option)
If you select On
4.
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : The blue background automatically appears
when there is no signal in AV mode.
on
the
screen
Tilt
The TV
another
1.
2.
3.
1
2
3
4
5
6
7
8
90
4.
picture may tilt to the
position. This function
left
can
or right if the TV set moves to
be used to compensate the tilt.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on the
Tilt pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
MENU
2.
3.
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
condition
by degaussing, try
timer
Sleep
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
-
i
screen
-
-
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
-
24
-
-
PIP
Option
PIP is
:
an
optional function,
that
so
only
the set with PIP function
operate.
can
PIP
operation (option)
(Picture
in
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
mode selection for sub
Input
picture.
picture
Press the PIP INPUT button to select the
input
mode for the sub
picture.
Each time this button is pressed, each
displayed as shown below.
input
mode for the sub
pic-
ture is
Programme
number
AV4
Swapping
AV2
AV1
AV3
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PIP PR +/- button. The selected programme number is
displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
Note
ture
picture
: When the sub picture
quality might get poor.
Sub
picture
1/9 size
size is 1/2 of the main
1/2 size
picture,
the
pic-
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 12 sub
pictures mode only and see your favorite station by exchanging the
main and sub pictures.
Press the SCAN button to select 12 sub pictures.
the selected 12 sub pictures search all the stored stations.
Press the SCAN button again to switch off these sub pictures.
Only
25
FM Radio
You
can
setting
listen to FM radio
by using
the remote control handset.
On and off
Insert the earphone to the earphone socket of the remote control
handset.
To switch the FM radio on, press the FM ON/OFF button for a while.
Press this button
Volume
1
2
3
4
5
6
7
8
90
again
adjustment
Repeatedly press
Adjust
MENU
to switch it off.
the FM MENU button to select VOL
menu.
the FM sound volume with the TUNE/VOL button of the
remote control handset.
Auto
tuning
Repeatedly press
the FM MENU button to select P.SET
(Pre-set)
menu.
If you press the TUNE/VOL button for
a
while, auto tuning mode
start.
i
If you press the FM MENU button
will
during
auto
tuning,
this function
stop.
Manual
tuning
the FM MENU button to select P.SET menu.
Use the the TUNE/VOL button to tune the radio channel. When
pressing the TUNE/VOL button one time, it will tune with 100KHz.
Press the FM MENU button to stored it.
Repeatedly press
Note: When the battery display of the remote control handset is
bar (
), this function may not be worked.
26
one
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
12
3
45
6
78
90
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or following page.
Page
1.
2.
MENU
a colour button in LIST mode (option)
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
MODE/* button to switch to LIST mode.
Programming
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
coloured button.
can select this page with the same coloured button.
The three other coloured buttons are programmed in the
i
M
same
way.
27
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
2
3
4
5
6
7
8
90
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
i
28
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
the TV
Displays
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
MENU
Stops the automatic page
text page consists of 2 or
change
which will
occur
if
a
tele-
more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
?
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
change
the sub page, press the RED / GREEN, D / E but-
ton.
Press this button
again
to exit this function.
29
Connection of PC
RGB PC mode
You
as
1.
2.
3.
adjust
prefer.
can
you
(option)
(option)
horizontal/vertical
horizontal/vertical size
position,
Repeatedly press the TV/AV button to select the RGB PC
mode.
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select PC
Setup.
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
PCoSetup
{
{
{
Tooset
()O}{OOKOMENU
4.
Press the G button and then D / E button to select V-Position,
or H-Size on the PC Setup pull-down
V-Size, H-Position
menu.
5.
Press the G button and then F / G button to make
appropriate
adjustments.
PC
MENU
Setup
V-Position
{
V-Size
H-Position
H-Size
{
0
{
{
()O}{OOKOMENU
i
6.
7.
V-Position
This function is to
adjust picture
V-Size
This function is to
change
H-Position
This function is to
adjust picture
H-Size
This function is to
change
to up or down as you
the vertical
screen
to left or
the horizontal
prefer.
size.
right
as
screen
you
prefer.
size.
Press the OK button to store it for the PC monitor picture.
Repeatedly press the MENU button to return to normal PC
viewing.
PC in socket
1.
2.
S-VIDEOL/MN
3.
4.
AUDIO
R
AV4
PCINUT
PERSONAL COMPUTER
30
(option)
Connect the monitor output socket of the PERSONAL COMPUTER to the PC INPUT socket on the set.
Connect the audio cable from the PC to the AUDIO sockets on
the set.
Press the TV/AV button to select RGB PC.
Turn the PC on, and the PC picture appears on the screen.
The set can be operated as the PC monitor.
Note : Set the resolution of PC to VGA 640x480
mode to use this set as PC monitor.
(60 Hz)
video
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
VIDEO
PB
PR
(L)
-
Y
PB
PR
(L)
-
AUDIO
Y
-
(R)
-
(R)
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
VIDEO
ANT IN
L L 75Ω
(L)
-
AUDIO
AUDIO
(480p/576p
/1080)
(R)
-
RF
OUT
AV2
MONITOR
OUT
IN
OUT
AV1
VIDEO
IN
Aerial socket
1.
2.
3.
4.
5.
(MONO)
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
AV3
IN
(LMONO) AUDIO(R)
IN
VCR
VIDEO
Y
PB
PR
(L)
-
Y
PB
PR
(L)
-
AUDIO
-
(R)
-
(R)
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
AUDIO
(480p/576p
/1080)
ANT IN
L L 75Ω
2
1
OUT
VIDEO
Audio/Video in/out sockets
1.
2.
3.
(LMONO) AUDIO(R)
IN
MONITOR
OUT
AV3
IN
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to RF OUT sockets of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV1, AV2, AV3 or AV4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
VCR
Y
VIDEO
PB
PR
(L)
PR
(L)
AUDIO
-
-
(R)
-
(R)
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
VIDEO
ANT IN
L L 75Ω
PB
(L)
-
AUDIO
-
AUDIO
-
(480p/576p
/1080i)
(R)
RF
OUT
AV2
IN
MONITOR
OUT
OUT
AV1
You
also record programmes received
tape via audio/video out sockets.
can
by
the TV
on
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Euro scart socket
1.
2.
VDEO
IN
video
(MONO)
AV3
IN
(L/MONO) AUDO (R)
IN
VCR
(option)
S-VIDEOL/MN
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV1 or AV2 mode automatically. But
if you want to keep on watching TV mode, press the PR +/- or
AUDIO
R
AV4
PCINUT
NUMBER buttons.
VCR
Otherwise press the TV/AV button
set to select AV1 or AV2. The VCR
the screen.
You
can
on
the remote control hand-
playback picture appears
also record programmes received
by the TV on
on
video tape.
Y
PB
PR
(L)
-
PR
(L)
-
VIDEO
AUDIO
(R)
-
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
Note
b.
AUDIO
-
(R)
(480p/576p
/1080i)
ANT IN
:
LL 75Ω
1
a.
PB
Signal type RGB, i.e. the signals red, green and blue
can
be selected for the Euro scart socket 1. These signals are
transmitted, for example, by a pay TV decoder, game machine
or photo CD unit, etc.
If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the AV 2 can be received.
2
OUT
only
VIDEO
MONITOR
OUT
AV3
IN
(L/MONO) AUDIO(R)
IN
VCR
31
Connection of external
equipment
S-Video/Audio in sockets
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO socket, the
connecting
picture quality will be further improved.
When
S-VIDEOL/MN
1.
AUDIO
R
AV4
2.
PCINUT
3.
4.
VCR
an
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV4 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
Y
VIDEO
PB
PR
(L)
-
PR
(L)
-
AUDIO
-
(R)
-
(R)
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VDEO
Y
VIDEO
PB
ANT IN
L L 75Ω
L)
AUDIO
-
AUDIO
(480p/576p
/1080i)
(R)
RF
OUT
Component
in sockets
(option)
AV2
MONITOR
OUT
IN
OUT
AV1
VIDEO
IN
AV3
IN
(MONO)
(L/MONO) AUDIO(R)
IN
1.
COMPONENT
(DVD)
2.
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT1 (480i/480p/576i/1080i)
or (480i/480p/576i/576p/1080i) to the COMPONENT INPUT
sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets
of
COMPONENT1
(480i/480p/576i/1080i) or
(480i/480p/576i/576p/1080i).
3.
4.
Y
VIDEO
PB
(L)
-
PR
(L)
-
AUDIO
PR
(R)
-
COMPONENT1
(480i/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
Press the TV/AV button to select COMPONENT1.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the
screen.
COMPONENT2
(480p/576p
/1080i)
VIDEO
Y
V
ANT IN
LL 75Ω
DEO
PB
(L)
-
AUDIO
AUDIO
(R)
-
Available format
(R)
RF
OUT
AV2
IN
MONITOR
OUT
OUT
AV1
IN
VIDEO
AV3
IN
(MONO)
(L/MONO) AUDIO(R)
480i
IN
480p
1080i
576i
576p
50Hz
COMPONENT1
COMPONENT
60Hz
(DTV)
50Hz
COMPONENT2
Y
PB
PR
(L)
VIDEO
-
AUDIO
(R)
-
60Hz
COMPONENT1
(480/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
(480p/576p
/1080i)
VIDEO
Y
LL 75Ω
PB
VIDEO
ANT IN
(L)
PR
AUDIO
-
-
(L)
-
AUDIO
-
(R)
DTV in sockets
(R)
RF
OUT
AV2
IN
MONITOR
OUT
(option)
OUT
AV1
IN
VIDEO
AV3
IN
(MONO)
(L/MONO) AUDIO(R)
IN
1.
Second TV
2.
3.
Connect the
HD-SET TOP inputs of the COMPONENT2
(480p/1080i) or (480p/576p/1080i) to the COMPONENT INPUT
sockets (Y PB PR) on the set.
Connect audio inputs to Audio sockets of COMPONENT2
(480p/1080i) or (480p/576p/1080i).
Press the TV/AV button to select COMPONENT2.
Monitor out sockets
VIDEO
Y
PB
PR
(L)
AUDIO
-
-
(R)
COMPONENT1
(480/480p
576i/576p
/1080i)
DVD
/DTV
INPUT
COMPONENT2
VIDEO
Y
VIDEO
ANT IN
L L 75Ω
PB
(L)
-
AUDIO
PR
-
(L)
-
AUDIO
-
(480p/576p
/1080i)
(R)
(R)
RF
OUT
Connect the audio/video in sockets of the other TV
MONITOR OUT sockets of the set.
or
monitor to
AV2
MONITOR
OUT
N
OUT
AV1
VIDEO
N
(MONO)
AV3
IN
(L/MONO) AUDIO(R)
IN
RF out sockets
Second TV
32
Connect the audio/video in sockets of the other TV
OUT sockets of the set.
or
monitor to RF
Connection of external
Headphone
equipment
socket
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the F / G button
on the §Volume pull-down menu. See the 'Sound adjustment'
section.
S-VIDEOL/MN
AUDIO
R
Sound
AV4
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
FMoTransmitter
{
PCINPUT
330
{
()O}{OOKOMENU
If you press the MUTE button, only the sound from the TV's speakers
switched off.
When a programme is received in dual language, you can select
a language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound; L+R, L+L or R+R, in turn.
are
33
MEMO
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
35
Download PDF